NetNumen U31 Introduction
Contents
NetNumen U31 Overview
NetNumen U31 Software and Networking
NE Agent Application
NetNumen U31 Client Software Installation
2
NetNumen U31 Architecture NMS/OSS/BSS
EMS
3rd Party NMS/OSS/BSS SNMP FM
NetNumenTM U31
FILE
FILE
CM (CSV)
Fault Management
Inventory Management
PM (CSV)
Performance Management
Log Management
Northbound Interface
Configuration Management
Security Management System Management
Topology Management Southbound Interface
NE
NE (UTRAN)
NE (GERAN) 3
NE (LTE)
NetNumen U31 – Convenient Client Access BSS/OSS
Local
LAN/WAN
EMS
EMS
R
Multiple Client Access Method: 1.LMT 2.Local EMS Client 3.Remote EMS Client
LAN Client Operate Type: GUI
R NE
CORE
LMT
Remote
LMT
Local client
WAN R
R
LAN
NE LMT
CORE LMT
Remote client
Remote client
4
Internet
System Principles (Hierarchical Model)
5
Software Module Introduces
The NetNumen U31 system provides the following management management functions: Topology management
Configuration management
Fault management
Performance management
Security management
System System management
Log management manage ment
Task management manage ment
6
Contents
NetNumen U31 Overview O verview
NetNumen U31 Software and Networking
NE Agent Application
NetNumen U31 Client Software Installation
7
NetNumen U31 Work Environment NetNumen U31 provides
the basic data of the devices and the device management services for the upper-layer OSS or integrated NMS.
Operation analysis provides
the original statistic analysis data
Resource management provides
NetNumen U31 implements centralized monitoring, management, and maintenance
8
centralized device configuration information
Electronic operation and maintenance provides
the network fault and alarm information
Remote Client Principle
9
Single-Server System
10
Hardware Structure of the Local HA
11
Local Networking Mode
12
Remote Networking Mode
13
Contents
NetNumen U31 Overview O verview
NetNumen U31 Software and Networking
NE Agent Application
NetNumen U31 Client Software Installation
14
NetNumen U31 Topology ADD ADD an Agent From main window you can see and create new agent. The Agent is sw part that manage NE. Create Object = Create new agent. It is possible to create element without without physical HW installed. (eg. UR9000 Agent is linked to HW UMP, slot 5-6). For SDR Agent is linked to HW in CC Board.
15
NetNumen U31 Adding NE Agent
Specify the IP address - from planning - related to future RNC/BSC NE Agent (UMP board in slot 5 or 6)
16
NetNumen U31 View NE Agent
17
NetNumen U31 Starting NE Management To apply change you must synchronize the element(otherwise only local DB is changed)
You must start NE Management in order to modify configuration (Alarms are synchronized automatically)
18
NetNumen U31 Starting NE Management Check status of hw links Signalling configuration (like SCTP status)
SW of the NEs not of the NetNumen U31: Version management for: -UMP (ZXUR9000) -CC (ZXSDR)
Connectivity test
19
Parameter configuration
Contents
NetNumen U31 Overview O verview
NetNumen U31 Software and Networking
NE Agent Application
NetNumen U31 Client Software Installation
20
Software Architecture
The server software operates in a UNIX or Linux operating system. The supported database type is Oracle. The client software operates in a Windows operating system. Both the client and the server require the support of the Java Virtual Machine (JVM).
21
Installation Environment
Software Configuration for for Client Object
Operation System System Document Browsing Tool
Configuration Windows 2000 (32bit) / 2003 (32bit) / 2008 R2(64bit) / XP (32bit) / VISTA (32bit) /7 Pro (32/64bit) / 8 Pro (32/64bit) / 10 (32/64bit) MS Office2003 above/Acrobat reader
Hardware environment
Minimum Hardware Configuration for U31 Client Cli ent
Object
Configuration
CPU
>
2.0GHz
Memory
>
Built-in Hard Disk
>
= 2G =80G
22
Installing the NetNumen U31 Client Software
Steps >> 1.Enter the directory containing the installation in stallation files files (for example, D:\installation package package name), and then double-click the setup.bat file. The Install dialog box is displayed. 2.Press the Enter key to unzip un zip the installation files to the default path, or enter another path.
23
Installing the NetNumen U31 Client Software 3.Select English from the drop-down list
24
Installing the NetNumen U31 Client Software
4.Click Next. The License Agreement dialog box is displayed. Select I accept the license agreement. 5.Click Next. The Select Installation Style dialog box is displayed. Select an installation style, installation type (Client Program), and a deployment mode (Local system),
25
Installing the NetNumen U31 Client Software
26
Installing the NetNumen U31 Client Software
6.Click Next. The Select Product dialog box is displayed. Select the products as needed to be installed, and set the installation path.
27
Installing the NetNumen U31 Client Software
7.Click Next.
8.The System Information Detection dialog dialog box is displayed.
28
Installing the NetNumen U31 Client Software
9.Click Next. Verify that the Detection Result of all items is Pass, and click Next.
29
Installing the NetNumen U31 Client Software
10.Verify that the installation information is correct, and click Install. The Unzip and Copy Files dialog box is displayed, start to unzip and copy Files. 11.After the file copying copy ing and unzipping process is completed, click Next.
If you need to configure clock server parameters, go to step 12
If you do not need to configure any task parameter, go to step 13.
30
Installing the NetNumen U31 Client Software
31
Installing the NetNumen U31 Client Software
12.(Optional) Select Common Configuration > Common Property in the left pane, and then select Global Configuration > Clock Synchronization > Main SNTP server IP in the right pane
32
Installing the NetNumen U31 Client Software
13.Use the default settings, and click Next.
14.After the system initialization is completed, click Next.
33
Installing the NetNumen U31 Client Software Program
Function
U31 Client
Starts the NetNumen U31 client.
U31 Client Portal
Starts the NetNumen U31 client portal, por tal, which is used for logging in to a specific functional module, such as the t he Fault Management module. Configures Configures the system parameters of the client.
U31 Config Center Uninstalls the client software. U31 Uninstall Uninsta ll Tool Tool
34
Starting the EMS Client Steps:
1.Perform any of the following operations.
Double-click the U31 Client icon on the desktop. Select Start > All Programs > NetNumen U31 Unified Management System > U31 Client. Enter the ums-client directory in the installation path of the client software, and then double-click client.exe.
35
.
Starting the EMS Client
3.(Optional) Click
4.Click OK.
.
36
Uninstalling the NetNumen NetNumen U31 Client Software
On the client, select Start > All Programs > NetNumen U31 Unified Management System > U31 Uninstall Tool. The Uninstall—Clean database and backup selection dialog box is displayed
37
Uninstalling the NetNumen NetNumen U31 Client Software
2.Select Clean backup and log data, and click Next.
38
Uninstalling the NetNumen NetNumen U31 Client Software
3.Click Start uninstallation. A message is displayed, asking whether necessary backup is completed. 4.Click Yes. A message is displayed, asking whether to continue uninstallation. 5.Click Yes. After the uninstallation is completed, the Uninstallation Finished dialog box is displayed. 6.Click Finish.
39
Thank you