Build Your Torcs Track in 20 Minutes

Build your track for TORCS in 20 minutes

This document explain how to make a track for torcs using trackeditor to create the track and then modify the xml file of the track (the physical description) with a text editor and then make the 3d description (ac file) using trackgen. Note that trackeditor and trackgen are provided with torcs. Vicente Martí Centelles Last modification:04/01/07 Version v1.01

F1 TORCS


v1.01

Contents of the tutorial 1 About the tutorial.................................................................................3 2 Open source Programs needed and useful tutorials.............................4 3 Test track..............................................................................................5 3.1 The xml file of the original track................................................5 3.2 Test the track into torcs: trackgen. ............................................15 3.3 Hand edit the track: banking. ....................................................16 3.4 Hand edit the track: grade. ........................................................20 3.5 Graphic section..........................................................................22 3.6 Starting Grid section..................................................................23 3.7 Turn marks section.....................................................................23 3.8 Cams section..............................................................................24 3.9 Surface section...........................................................................26 3.10 Environment Mapping..............................................................28 3.11 Profil tangent............................................................................31 3.12 Profil steps................................................................................33 3.13 Elevation files of the terrain.....................................................34 3.14 Object Map: add objects to the track......................................39 4 Edit the ac file created with trackgen with blender............................52 5 Make a real track...............................................................................59 6 Create a video from TORCS..............................................................63 7 Create a adio file from TORCS.........................................................65 8 Mixing the adio file and the video file from TORCS........................66 9 How to create a Formula 1 car for TORCS......................................67

Vicente Martí Centelles

Last modification:04/01/07

Formula 1 TORCS

2/67

F1 TORCS


v1.01

3/67

1 About the tutorial This tutorial should be a good reference to people that want to make their own tracks, cars... and modify some parts of torcs in order to develop the game and improve it. I'm working on formula 1 tracks and cars for torcs with the help of Gonzalo Aranda, Andrew Sumner, Berny, Eric Espie and some people that I could forgot (so sorry for that). If you want to get involved tell to me and I will give you some info about the project. Please, you can sugest anything or see the project of the formula 1 tracks and cars tor torcs visit the forum: http://www.s8.createphpbb.com/f1torcs and the web of f1torcs http://usuarios.lycos.es/f1torcs/ You can also found some info in my home page : http://www4.uji.es/~al063357 Don't forget to visit the official web page of TORCS http://www.torcs.org to read the latest news about this wonderful racing car simulator

Home page: http://www4.uji.es/~al063357 04/01/07



Formula 1 TORCS

F1 TORCS


v1.01

4/67

2 Open source Programs needed and useful tutorials All programs used in this tutorial are open source. So you don't need to spend any money in a program license. One advantage of open source programs is that they are always improving and you can help to develop these software. TORCS: The Open Racing Car Simulator We are going to make tracks, cars... for this amazing game and we will try to develop it by making a good track, car... for it. The GIMP We will use this software to edit the images and textures. Blender We can edit the 3d description of the track or a track (ac file) in an easy way. Trackeditor This software is provided with torcs. We can make tracks with this. Trackgen This software is provided with torcs. We can make tracks from the xml file. A text editor You can use you favourite text editor to edit the xml files, for example Scintilla Text Editor. Audacity Used to record the sound from torcs. VirtualDubMod We will use this software to create a video from the generated images with the movie tool from torcs. OpenOffice I have used this software to create this tutorial.



Formula 1 TORCS

F1 TORCS


v1.01

5/67

3 Test track 3.1 The xml file of the original track I have created a test track with trackeditor and now we are going to hand edit it. (You can read the tutorial provided with torcs to learn how to use tarckeditor: Trackeditor Manual)

]>



Formula 1 TORCS

F1 TORCS


v1.01

&default-surfaces;



Formula 1 TORCS

6/67

F1 TORCS


v1.01



Formula 1 TORCS

7/67

F1 TORCS


v1.01



Formula 1 TORCS

8/67

F1 TORCS


v1.01



Formula 1 TORCS

9/67

F1 TORCS


v1.01



Formula 1 TORCS

10/67

F1 TORCS


v1.01



Formula 1 TORCS

11/67

F1 TORCS


v1.01



Formula 1 TORCS

12/67

F1 TORCS


v1.01



Formula 1 TORCS

13/67

F1 TORCS


v1.01



Formula 1 TORCS

14/67

F1 TORCS


v1.01

15/67

Now we are going to edit this track created with trackeditor.

3.2 Test the track into torcs: trackgen. We will use trackgen to create the track. I mean, trackgen creates the 3d file of the track from the xml file. For testing the track use the command (this just creates the track, not the terrain): trackgen -c category -n name

For the final track use the command (creates the track and the terrain): trackgen -c category -n name -a

The trackgen help is: Terrain generator for tracks $Revision: 1.5 $ Usage: trackgen -c category -n name [-a] [-m] [-s] [-S] [-E [-H ]] -c category : track category (road, oval, dirt...) -n name : track name -b : draw bump track -B : Don't use terrain border (relief supplied int clockwise, ext CC) Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


-a -z -s -S -E

-H

v1.01

: : : : :

draw all (default is track only) Just calculate track parameters and exit split the track and the terrain split all save elevation file n 0: all elevatation files 1: elevation file of terrain + track 2: elevation file of terrain with track white 3: track only 4: track elevations with height steps : nb of height steps for 4th elevation file [30]

3.3 Hand edit the track: banking. Now we are going to edit the first corner, we are going to add a banking.

We are going to see what is the banking:

No banking

Banking



Formula 1 TORCS

16/67

F1 TORCS


v1.01

17/67

The default description or the 1st corner is:

We can add the banking in several ways: 3.3.1 Way 1: specify the banking start and end We can add the following to lines to indicate the banking of the segment. The first one indicates the banking of the beginning of the segment and the last one the banking of the end.

The positive number is for right curves (unit="deg" val="15") and the positive number for left curves (unit="deg" val="-15"). (tested with torcs) The curve consist in three segments so the banking must be in order to have a smooth curve: curve1: banking start 0, banking end 15 curve2: banking start 15, banking end 15 curve3: banking start 15, banking end 0



Formula 1 TORCS

F1 TORCS


v1.01

18/67

3.3.2 Way 2: specify the z left and right start and end We can add the following to lines to indicate the z (height) of the segment.
name="z name="z name="z name="z

start left" unit="m" val="0"/> start right" unit="m" val="3"/> end left" unit="m" val="0"/> end right" unit="m" val="3"/>

The curve consist in three segments so the banking must be in order to have a smooth curve: curve1: z start left: 0, z start ritght: 0, z end left: 3, z start ritght: 0 curve2: z start left: 3, z start ritght: 0, z end left: 3, z start ritght: 0 Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

19/67

curve3: z start left: 3, z start ritght: 0, z end left: 0, z start ritght: 0 Remember to delete the original z tag for each segment:

The result is:

You can do the same but not using the z start specification, trackgen gets automaticaly the z start left and right from the previous segement:

It's to say: Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

curve1: z end left: 3, z start ritght: 0 curve2: z end left: 3, z start ritght: 0 curve3: z end left: 0, z start ritght: 0 Remember to delete the original z tag for each segment:

The final xml file is:

3.4 Hand edit the track: grade. We can add the grade (slope) of the track. Track without grade:



Formula 1 TORCS

20/67

F1 TORCS


v1.01

21/67

Track with positive grade:

The tag that we must add to each segment of the xml file is:

A positive value means go up a hill, and a negative value go down. To get a smooth road we have to add the grade to all segments to get the correct grade. Remember to delete the original z tag for each segment:

The following segments are from the test track with a smooth road: Segment 1: z start: 0, z end: 0 Segment 2: z end left: 3, z end right: 0 Segment 3: z end left: 3, z end right: 0 Segment 4: z end left: 0, z end ritght: 0 Segment 5: grade = 10 % Segment 6: grade = - 10 % Segment 7: grade = - 2 % Segment 8: no z specification Segment 9: no z specification Segment 10:z end 0

Segment 1

Segment 10

Segment 2 Segment 3

Segment 9

Segment 6

Segment 5 Segment 4

Segment 7 Segment 8

The segments are: Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

Segment 1: recta1 Segment 2: curve1 Segment 3: curve2 Segment 4: curve3 Segment 5: recta2 Segment 6: curve4 Segment 7: curve5 Segment 8: recta3 Segment 9: curve6 Segment 10: straight 2

3.5 Graphic section. Background image Use a 2048x512 png image with all the view (360º) without repeating.

An example that you can find on some tracks for torcs.

You can add some settings to the graphics section:



Formula 1 TORCS

22/67

F1 TORCS


v1.01

23/67

The factor of view:

3.6 Starting Grid section. You can specify the starting grid of the track:

3.7 Turn marks section. This section defines the turn marks:

You have to add the next tags in each curve you want a turn mark (the values are the distances to the curve in meters):

For example:


Formula 1 TORCS

F1 TORCS


v1.01

24/67

You can use 50m, 100, 150, 200 and 300 (see the torcs\data\textures). You can edit these textures and copy them to your track folder. 3.8 Cams section. You can set up the cameras of your track, and you can add the number of cameras that you want.

The "segment" indicates the segment in which is placed the cam. "to right" indicates the distance to the corner of the segment (see the picture) "to start" indicates the distance to the corner of the segment (see the picture) "height" indicates the distance to the corner of the segment (see the picture)

to right to start The following segments are: Segment 1: recta1 Segment 2: curve1 Segment 3: curve2 Segment 4: curve3 Segment 5: recta2 Segment 6: curve4 Segment 7: curve5 Segment 8: recta3 Segment 9: curve6 Segment 10: straight 2



Formula 1 TORCS

F1 TORCS


v1.01

25/67

You can see a good set of cameras for the test track:



Formula 1 TORCS

F1 TORCS


v1.01

26/67

3.9 Surface section. You can add some surfaces in this section but you have to use a different name for each surface. A good idea is name the surface as asphalt-trackname-1. The default surfaces are located in:

All parameters are self explanatory, you can test them in torcs making some changes. Here you can see some examples of surfaces.
&default-surfaces;

name="bump name" val=""/> name="bump size" val="2.0" unit="m"/ name="friction" val="1.2"/> name="rolling resistance" val="0.001"/>

name="color R1" val="0.1"/> name="color G1" val="0.4"/> name="color B1" val="0.1"/> name="color R2" val="0.2"/> name="color G2" val="0.5"/> name="color B2" val="0.2"/> name="texture name" val="asgrassr_n.rgb"/> name="texture type" in="discrete, continuous" val="discrete"/> name="texture size" val="15" unit="m"/> name="texture mipmap" val="4.0"/>



Formula 1 TORCS

F1 TORCS


v1.01

27/67

For example I have created a surface for the asphalt called asphalt-vte:
&default-surfaces;

And now I have to put this name on the segments of the track (in every segment that you want to use this surface). section name="Track Segments">



Formula 1 TORCS

F1 TORCS


v1.01

28/67

3.10 Environment Mapping. The environment mapping is the texture that is reflected on the car, to get a good effect you have to make a soft image. You have to copy this section into the graphic section.

No environment mapping.



Formula 1 TORCS

F1 TORCS


v1.01

Exaggerated environment mapping.



Formula 1 TORCS

29/67

F1 TORCS


v1.01

Good environment mapping.



Formula 1 TORCS

30/67

F1 TORCS


v1.01

31/67

3.11 Profil tangent With this option we can make sharp edger on the track that makes the car jump. We can use the following two tags to indicate the profil tangent the start and/or the end of the segment:



Formula 1 TORCS

F1 TORCS


v1.01

If we use 0% the result is a soft edge with two segments of the track.



Formula 1 TORCS

32/67

F1 TORCS


v1.01

33/67

3.12 Profil steps. We can indicate the number of steps for a segment of the track.

We can also set the profil as a spline.

Or linear

Whe can set the leng of each profile step


Formula 1 TORCS

F1 TORCS


name="rside name="rside name="rside name="lside name="lside name="lside

v1.01

34/67

width" val="4"/> surface" val="grass"/> type" in="level,tangent" val="level"/> width" val="4"/> surface" val="grass"/> type" in="level,tangent" val="level"/>

3.13 Elevation files of the terrain. It's possible to use a elevation file to create the terrain.

The file elevation-map.png must have an alpha channel and be black an white (have a look at the file provided here in for the test track). First create the elevation file of the track: C:\Archivos de programa\torcs>trackgen -c road -n test -a -E 1 GfParmReadFile: Openning "tools/trackgen/trackgen.xml" (0014CFCC) loading windows module modules/track/track.dll LoadLibrary from modules/track/track.dll LoadLibrary return from modules/track/track.dll calling modInfo from modules/track/track.dll >>> modules/track/track.dll >>> windows module modules/track/track.dll loaded GfParmReadFile: Openning "tracks/road/test/test.xml" (00151094) GfParmReadFile: Openning "tracks/road/test/test.xml" (001B056C) Track step: 20.00 ++++++++++++ Track ++++++++++++ name = test author = Vicente Marti filename = tracks/road/test/test.xml nseg = 302 version = 4 length = 1265.483521 width = 14.000000 pits = 0 XSize = 571.599976 YSize = 218.000031 ZSize = 21.047829 Delta X = -0.000092 Delta Y = 0.000397 Delta Z = 0.000000 Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

35/67

Delta Ang = 0.000002 (0.000119) === Indices Array Size = 19160 === Vertex Array Size = 57480 === Tex Coord Array Size = 38320 (457.599976, 207.999985, 11.704998), (457.599976, 206.999985, 12.704998) (407.599976, 207.999985, 11.494546), (407.599976, 206.999985, 12.494546) (457.599792, 126.999985, 15.811872), (457.599793, 127.999985, 16.811872) (507.599792, 126.999985, 10.575890), (507.599793, 127.999985, 11.575890) === Indices really used = 6522 Track step: 20.00 Border margin: 80.00 step: 30.00 height: 1.00GenerateMes h: right, reverse order, interior Relief: 0 vtx, 0 seg Load Chains Segments = 302 xmin = 35.599823 ymin = 30.000000 xmax = 535.568298 ymax = 186.999985 Chains = 1 4147 Nodes Renum Nodes, Triangles, Sides GenerateMesh: left, normal order, exterior Relief: 0 vtx, 0 seg Load Chains Segments = 306 xmin = -80.000000 ymin = -80.000000 xmax = 651.599976 ymax = 298.000031 Chains = 2 1648 Nodes Renum Nodes, Triangles, Sides Generating Elevation Map tracks/road/test/test-elv.png (1024, 529) 100% |**************************************************************| row 529

The file created is:

Start the GIMP, and create a new file with transparent background and the same size (pixels) of test-elv.png. Now open the test-elv.png with the gimp, select the image copy and paste the image on the new transparent document. Modify the image on the new document, for example Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

36/67

I have painted some dark areas (the dark pixel is the lowest height and the whiter pixel is the higher). The result is:

Now save the image as elevation-map.png save the alpha chanel have an alpha chanel and be black an withe. Now create the track: C:\Archivos de programa\torcs>trackgen -c road -n test -a GfParmReadFile: Openning "tools/trackgen/trackgen.xml" (0014CFBC) loading windows module modules/track/track.dll LoadLibrary from modules/track/track.dll LoadLibrary return from modules/track/track.dll calling modInfo from modules/track/track.dll >>> modules/track/track.dll >>> windows module modules/track/track.dll loaded GfParmReadFile: Openning "tracks/road/test/test.xml" (00151084) GfParmReadFile: Openning "tracks/road/test/test.xml" (001B056C) Track step: 20.00 ++++++++++++ Track ++++++++++++ name = test author = Vicente Marti filename = tracks/road/test/test.xml nseg = 302 version = 4 length = 1265.483521 width = 14.000000 pits = 0 XSize = 571.599976 YSize = 218.000031 ZSize = 21.047829 Delta X = -0.000092 Delta Y = 0.000397 Delta Z = 0.000000 Delta Ang = 0.000002 (0.000119) === Indices Array Size = 19160 === Vertex Array Size = 57480 Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

37/67

=== Tex Coord Array Size = 38320 (457.599976, 207.999985, 11.704998), (457.599976, 206.999985, 12.704998) (407.599976, 207.999985, 11.494546), (407.599976, 206.999985, 12.494546) (457.599792, 126.999985, 15.811872), (457.599793, 127.999985, 16.811872) (507.599792, 126.999985, 10.575890), (507.599793, 127.999985, 11.575890) === Indices really used = 6522 Track step: 20.00 Border margin: 80.00 step: 30.00 height: 1.00Loading Ele vation Map tracks/road/test/elevation-map.png GenerateMesh: right, reverse order, interior Relief: 0 vtx, 0 seg Load Chains Segments = 302 xmin = 35.599823 ymin = 30.000000 xmax = 535.568298 ymax = 186.999985 Chains = 1 4147 Nodes Renum Nodes, Triangles, Sides GenerateMesh: left, normal order, exterior Relief: 0 vtx, 0 seg Load Chains Segments = 306 xmin = -80.000000 ymin = -80.000000 xmax = 651.599976 ymax = 298.000031 Chains = 2 1648 Nodes Renum Nodes, Triangles, Sides

The result in torcs is:



Formula 1 TORCS

F1 TORCS


v1.01

38/67

To get good results you have to make a smooth elevation-map.png. If you don't save the png image correcty you will have problems and trackgen, the image won't be loaded and is reported by the trackgen output (/test/elevationmap.png bad byte count... 3072 instead of 4096). C:\Archivos de programa\torcs>trackgen -c road -n test -a GfParmReadFile: Openning "tools/trackgen/trackgen.xml" (0014CFBC) loading windows module modules/track/track.dll LoadLibrary from modules/track/track.dll LoadLibrary return from modules/track/track.dll calling modInfo from modules/track/track.dll >>> modules/track/track.dll >>> windows module modules/track/track.dll loaded GfParmReadFile: Openning "tracks/road/test/test.xml" (00151084) GfParmReadFile: Openning "tracks/road/test/test.xml" (001B056C) Track step: 20.00 ++++++++++++ Track ++++++++++++ name = test author = Vicente Marti filename = tracks/road/test/test.xml nseg = 302 version = 4 length = 1265.483521 width = 14.000000 pits = 0 XSize = 571.599976 YSize = 218.000031 ZSize = 21.047829 Delta X = -0.000092 Delta Y = 0.000397 Delta Z = 0.000000 Delta Ang = 0.000002 (0.000119) === Indices Array Size = 19160 === Vertex Array Size = 57480 === Tex Coord Array Size = 38320 (457.599976, 207.999985, 11.704998), (457.599976, 206.999985, 12.704998) (407.599976, 207.999985, 11.494546), (407.599976, 206.999985, 12.494546) (457.599792, 126.999985, 15.811872), (457.599793, 127.999985, 16.811872) (507.599792, 126.999985, 10.575890), (507.599793, 127.999985, 11.575890) === Indices really used = 6522 Track step: 20.00 Border margin: 80.00 step: 30.00 height: 1.00tracks/road /test/elevation-map.png bad byte count... 3072 instead of 4096 GenerateMesh: right, reverse order, interior Relief: 0 vtx, 0 seg Load Chains Segments = 302 xmin = 35.599823 ymin = 30.000000 xmax = 535.568298 ymax = 186.999985 Chains = 1 4147 Nodes Renum Nodes, Triangles, Sides GenerateMesh: left, normal order, exterior Relief: 0 vtx, 0 seg Load Chains Segments = 306 xmin = -80.000000 ymin = -80.000000 xmax = 651.599976 ymax = 298.000031 Chains = 2 Vicente Martí Centelles


Formula 1 TORCS

F1 TORCS


v1.01

39/67

1648 Nodes Renum Nodes, Triangles, Sides

Terrain elevation using the elevation-map.png

Its also explained how to create the terrain elevation using the elevation-map.png in the TORCS track HOWTO ( http://www.idiap.ch/~dimitrak/torcs/track-howto.html )

3.14 Object Map: add objects to the track. It's possible to use a png image to specify the objects on the track. The default objects ore in:

To add the object map to the xml file of the track you must add at the beginning of the xml file ]>

and at the terrain generation section:

and a new section for the objects:
&default-objects;



Formula 1 TORCS

F1 TORCS


v1.01

40/67

You can use the default objects and you can add your own objects (for exaple hte treevte1 and stadn-vte). You must copy the files of your ac files of the objects in the test (or your trackname) folder. The trees have a random orientation, and the stadium a orientation with regard tho the main track. The angle is: (the objects are orientated with regard to the x,y,z coordinates and the angle is with regard to the x axis.

The orientation of the stadium-vte1.ac is:

and the orientation of the track.



Formula 1 TORCS

F1 TORCS


v1.01

41/67

To create the object map, create a image of the track: trackgen -c road -n test -E 2.

Start the GIMP, and create a new file with transparent background and the same size (pixels) of test-elv.png (1024x529). Fill the image with color black (0x000000). Open the test-elv2.png as a new layer, create a new layer and paint pixels of the color of the objects on this layer using the test-elev2.png as a template.



Formula 1 TORCS

F1 TORCS


v1.01

Finally hide the test-elv2.png layer and save the png file. The result is:

The result is:



Formula 1 TORCS

42/67

F1 TORCS


v1.01

The default objects are:



Formula 1 TORCS

43/67

F1 TORCS


v1.01



Formula 1 TORCS

44/67

F1 TORCS


v1.01



Formula 1 TORCS

45/67

F1 TORCS


v1.01

46/67

3.15 Shading of the track: the acc file. We will work on the test.ac file that we have created (this file must work into torcs). Copy the file to test-bak.ac. Now to create the file of the shading run accc +shad test-bak.ac test-shade.ac

Finally we are going to combine the shading and the description of the track into one file (test.acc): accc -g test.acc -l0 test-bak.ac -l1 test-shade.ac -d1 300 -S 300 -es

-d3 1000 -d2 500

The shading of the track is in the file shadow2.rgb. To create this file open test.blend in blender. Create a cam. The cam must be on the z axis and the dimensions of the render must be the same as the test-elev.png (in this case 1024 x 529), click on F10 and set this dimensions. create a light on the same position that is in the xml file:

To set up the possition select the light and click on the n key. The lamp mus be ray shadow and the kind of light lamp or sun. You can also specify the power and other parameters (for example the lens of the camera, I have used a lens of 35). You must set the clip end of the camera to 2000 or above. Finally center the camera on the track.



Formula 1 TORCS

F1 TORCS


v1.01

To center the camera

So the centre values are: x =

x 1 x 2 −80651,6 = =285,8 2 2



Formula 1 TORCS

47/67

F1 TORCS


y =

v1.01

y 1 y 2 −80298,0 = =109,0 2 2

you have to set up the z value to get all the track inside the area, Z = 727,129:

rendering the image and saving as png 100% quality (F3):



Formula 1 TORCS

48/67

F1 TORCS


v1.01

49/67

resize this file to a power of 2 (1024 x 512 for example) and save as shadow2.rgb. You can adjust the bright and the contrast of the image (or increase the power of the lamp) and smooth the shadows with the gimp. You can also paint the image with other colors: green, red...:

Finally change on the xml file

Run torcs and enjoy your track with the shadows:



Formula 1 TORCS

F1 TORCS


v1.01

50/67

*** Some tags that I don't understand I dont know how works sone things in torcs, I decided to explain it here. Please, if you know how i can solve some of these "problems" post it on the formula 1 torcs forum and I will include it on the tutorial and of course I will add you as the autor of the topic: http://www.s8.createphpbb.com/f1torcs Thanks. Left & Right part of segment

that is used for
and



Formula 1 TORCS

F1 TORCS




v1.01

Formula 1 TORCS

51/67

F1 TORCS


v1.01

52/67

4 Edit the ac file created with trackgen with blender. When we finish to modify the xml file of the track, we will create the track wiht the terrain using trackeditor (read the beginning of this tutorial). Make sure that the track is OK, it's to say, the xml is perfect and we won't make any change on it. In order to do this, you should test the track into torcs in several races. If the track is OK, now we can modify the track with blender. First of all make a bakcup of the original track, go to the folder tracks/category/name and copy name.ac to name-backup.ac. Open blender and go to File -> Import ->AC3D (.ac) and select name.ac. Your track will be loaded into blender. You must put the textures of the track in the same folder of the name.ac in order to be loaded by torcs, you can copy them from trocs/data/textures. Save the track 3d description of the track as name.blend (File -> Save As) in the folder tracks/category/name. Now you can edit this file. One unit in blender is one meter of the real track when you export to TORCS. Add new objects (the objests must have triangles, so convert squared faces to triangles (select the faces into blender and pres Crtl + T)), modify them, add uv mapping. You can Append objects in an easy way. Go to File ->Append and select the blender file you want to append. This is useful to add trees, adverts... to your track in an easy way and we can create objets ready to append to the tracks. The objet will be appent to your track, so now you can move it, scale and put it in the right place. If you want to make a copy of one object, just pres Shift + D, you can move the copy by moving the mouse, very easy, isn't it? If you want to make a new object, for example a bridge with and advert I recomend you to create first the object in a new blender file and then Appent it to your track. To export the car into ac format that is readable by torcs you have to use the TORCS AC3D exporter. You can find this phyton script with this document. To install the script just copy the file ac3d_torcs_export.py to Blender Foundation\Blender\.blender\scripts. Now the exporter is available in the export menu. To export the ac file, select all objects (press a a) and go to File -> Export ->TORCS AC3D (.ac): name.ac. (If you have problens to export because blender crashes, reopen the name.blender, press aa, File -> Export ->TORCS AC3D (.ac): name.ac without doing any modification to the mesh, I think it's a bug of Blender that will be solved in a future). Now test the new 3d description of the track into torcs, enjoy it. Now I will show you an example: modify the test track.



Formula 1 TORCS

F1 TORCS


v1.01

53/67

Copy the test.ac file in a new folder called test_blender. Copy the textures that uses your track from trocs/data/textures (You can copy all if you don't want to search for every textures) to test_blender folder. Open blender and click on File -> Import ->AC3D (.ac). Select test.ac. You track will be loaded into blender.

Save the track 3d description of the track as test_blender.blend (File -> Save As) in the folder test_blender. Now you can edit this file. The next step is edit the track. I'm going to change the TORCS logo of the start by a new one: Formula 1 Torcs. First of all create this texture with the GIMP anc copy it to test_blender folder: f1_torcs_logo.rgb (512x256 pixels)

Select the object and click on the / key on the keyboard in order to edit the object. Change the Object mode to UV face select mode



Formula 1 TORCS

F1 TORCS


v1.01

54/67

The in another quadrant select the UV/Image editor.

Now click on Image -> Open and Select the image f1_torcs_logo.rgb that we have created

Finally, select the faces of the (right click to the face and mayus to add new faces) in the UV face select view and in the UV/Image editorview select all the vertex (click b and drag the mouse). Scale (click s key) and rotate (click r key) to fit the poligons to the logo



Formula 1 TORCS

F1 TORCS


v1.01

Now you can see the result in the 3d view.



Formula 1 TORCS

55/67

F1 TORCS


v1.01

56/67

Now we will add an advert to the track. Open the track with blender Click on file append (Shift F1). Select advert.blend and Object -> advert_f1_torcs and then click on load library. The object will be loaded into blender and placed near to 0,0,0. Select the object by right click amd move it to the right place.

You can make new copies of the selected object using the Shift + D keys. You can change the texture of the advert. For example we will change it for the michelin_logo.rgb. Select the object and clik on /. Then Go to UV Face Select and select the faces you want to change the texture.



Formula 1 TORCS

F1 TORCS


v1.01

57/67

Select the object and clik on /. Then Go to UV Face Select and select the faces you want to change the texture. In the UV mapping window go to Image -> Open and select the michelin_logo.rgb. Change the UV size... and now you have the advert ready.

You can also import directly an ac file to your track.blend. For example a tree from the torcs/data/objects folder.



Formula 1 TORCS

F1 TORCS


v1.01

58/67

Now you can export the track: select all object (click the a key) but don't select the cam and the lamp and click on File ->export -> AC3D TORCS. Copy this file (test.ac) and the new textures to the test folder (trocs/tracks/test). Run torcs and enjoy your new track.



Formula 1 TORCS

F1 TORCS


v1.01

59/67

5 Make a real track. We can make a real track with trackeditor. We can search the track map of the real track on Google Earth:

With the selection tool, select the track and paint it with black in a new layer. Now hide the original layer. You have to select the scale too, the scale will be our reference to make the tack to scale. (We can adjust later the track length with the option on trackeditor.)



Formula 1 TORCS

F1 TORCS


v1.01

Now we have to create the track with trackeditor and test the track into torcs.



Formula 1 TORCS

60/67

F1 TORCS


v1.01

You can also serah more images on the internet, for example I have found this one:

Which has a good detail of the new turn of la caixa:



Formula 1 TORCS

61/67

F1 TORCS


v1.01

62/67

So if we want a more actual track we have to modify these turn with trackeditor. Moreover with the aid of trackeditor we have to add the track-border with the aid of the background image. Finally we have the final track and we are sure we won't modify the track any more. So, now we have to edit the xml file in order to make a good banking and height steps.



Formula 1 TORCS

F1 TORCS


v1.01

63/67

6 Create a video from TORCS You can create a video around your track in an easy way, you just need an open source video editing program: VirtualDubMod. 6.1 Create the images (png) with TORCS You have to set up the torcs/confing/raceengine.xml.

You have to set up the eneble capture (yes), set the number of frames per second (fps) and finally the output directory. Run torcs and to make the movie press the c button in your keyboard. The png images for you video will be saved into the output directory. The name of the images is: torcs-0001-00000000.png, torcs-0001-00000001.png, torcs0001-00000002.png, torcs-0001-00000003.png...

6.2 Create the video from the png images. Now we will use VirtualDubMod. Start this program and click on File -> Open Video File and select torcs-0001-00000000.png and click on Open, (al the images created with torcs will be loaded into VirtualDubMod.



Formula 1 TORCS

F1 TORCS


v1.01

64/67

Go to video -> Frame Rate and set up the frame rate you have choosen in the torcs/confing/raceengine.xml. Now File -> Save as and select the video compression and type the name of the video and click on Save. It can take a while, and your video will be created. If you want you can modify the video with the tools provided with VirtualDubMod, change the resolution... Enjoy it.



Formula 1 TORCS

F1 TORCS


v1.01

65/67

7 Create a adio file from TORCS. You can record the sound that is sounding on your speakers, you just need an open source sound editing program: Audacity.

7.1 Record the sound from TORCS with Audacity. Open Audacity and select the stereo mix option (it is the type of reconding we want). Adjust the volume of the input (the michrophone that is drawn to in the display net to the mix option):0,05 or 0,01%.

Press the record button and run torcs. Play with torcs and the sound will be recorded into this audio file in audacity. Now you can save the waw, ogg or mp3 (you will need to download the lame_enc.dll from the Internet because is not provided with audacity) file by clicking on File -> save. Congratulations you have the audio file of your lap in torcs. Now you can edit the audio file with the tools provided with torcs.



Formula 1 TORCS

F1 TORCS


v1.01

66/67

8 Mixing the adio file and the video file from TORCS. You can mix the sound and audio file with the aid of VirtualDubMod. Open your video file in VirtualDubMod, then go to Stream -> Stream List and click on Add then select your audio file. Right click on the text that will apear and select the option Full processing mode. Afther that right click and select the Audio compression. Your audio is ready. Finally you can save the video file with the audio: File -> Save as and select the video compression and type the name of the video and click on Save. It can take a while, and your video will be created.



Formula 1 TORCS

F1 TORCS


v1.01

67/67

9 How to create a Formula 1 car for TORCS. It's very simple to create a car. I will explain how to make a car for torcs in windows. Import the ac file of an existing car into blender. Add new objects, modify them, add uv mapping. Finally convert squared faces to triangles (select the faces into blender and pres Crtl + T). Export the car into ac format. Now we have to make the acc files, these are the carshape files for torcs. To create these files first of all create a directory on your hard disk. For example: c:\tmp. Now copy into this directory accc.exe (from your torcs installation directory) and stripe.exe (is not provided with torcs). You can get stripe.exe for windows with this document (stripe.zip) or serch the web. To install it, unzip and copy stripe.exe into the same directory of accc.exe Copy your ac file into the C:\tmp directory and go to Start > Run > cmd. Change the directory to your C:\tmp. It's to say type "cd C:\tmp" into the console. To run accc.exe type into the console: "accc +es 0 my_carshpe.ac my_carshpe.acc" Now you have your acc files for torcs. You can modify the physics of the car and other properties by modifying the xml file.



Formula 1 TORCS

Build Your Torcs Track in 20 Minutes

Recommend Documents