ZTE CDR ASN.1 Format for ZXWN CS
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
ZTE CDR Format for ZXWN CS V6.4.2
5
About the Document Old Version
New Version
Date
Content
V3.0.0
11/09/2002
Created
V3.0.0
V3.0.1
01/04/2005
Add “HotBillingTag” to MOC, MTC, MCF, MOE,SMS-MO, SMS-MT CDRs
V3.0.1
V3.0.2
30/05/2005
Modify error tag values
V3.0.1
V3.0.2
30/05/2005
Change the length of “TrunkGroup” from 2 bytes to 4 bytes
V3.0.1
V3.0.2
30/06/2005
Add “pbrt”,”carp”,”CUGIndex”, ”CUGOutcomingAccessUsed” and “CUGOutcomingAccessInd” to MOC and MCF
V3.0.1
V3.0.2
30/06/2005
Add “pbrt” to Gate_in,Gate_out and Transit CDRs
V3.0.1
V3.0.2
30/06/2005
Add “carp” to MOE CDR
30/06/2005
Add “pbrt”,”carp”,”CUGIndex”, ”CUGIncomingAccessUsed” and “CUGIncomingAccessInd” to MTC CDR
V3.0.1
V3.0.2
V3.0.1
V3.0.2
30/06/2005
Modity the tag value to HLR,MOE and MCF to 11,12 and 13.Modify recordtype value of hlr,moe and mcf to 11,12 and 13
V3.0.1
V3.0.2
30/06/2005
Add “redirectiongNumber” to MTC CDR
V3.0.2
V3.1.0
25/08/2005
Add “hotBillingTag2” to MOC,MTC,MCF,MO,ROAM, SMS,LCSMO,LSCMT and LCSNI for India Spice.
V3.1.0
V3.1.1
30/12/2005
Add definition of McdType
V3.1.1
V3.1.2
12/09/2006
Modify the value of “RateIndication”
V3.1.2
V3.1.3
25/10/2006
Change the title of chapter 2 and 3.Change the number of chapter 3.Delete “General” part and other miscellaneous modifies.
V3.1.3
V4.0.0
02/11/2006
Add VIG, USSD, MGCF record
V3.1.3
V4.0.0
02/11/2006
Add hotbillingTag2 to SS, CEU, TCI, HLR record
ZTE Confidential Proprietary
Remarks
V3.05.20/V3.06.10
V3.06.20, MGCF record is aligned to 3GPP TS 32.260 V6.4.0，32.298 V6.3.0 V3.06.20
I
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 V3.06.20
V3.06.20
V3.1.3
V5.0.0
07/12/2006
Change the document template.Add the mapping information of field name and ASN.1 name.Delete GMLC records, which are dealed by service product.
V5.0.0
V5.0.1
05/01/2007
Modify the tag value of teleService and bearerService in BasicServiceCode
V5.0.0
V5.0.1
05/01/2007
Modify “Forward record type” to “Forward type”.Modify the description of it.
V5.0.0
V5.1.0
05/01/2007
Add dDCFlag MOC/MTC/GATE/TRANSIT record
to
V3.06.30 V3.06.30
19/01/2007
Add bSCIdentification/calledLocation/ callingPartyRoamingInd/serviceCategory/T ransactionIdentification/incomingCic/outgo ingCic/mscSPC/incomingTKGPName/outg oingTKGPName to MOC record
V3.06.30
19/01/2007
Add bSCIdentification/ TransactionIdentification/incomingCic/Out goingCic/mscSPC/incomingTKGPName/o utgoingTKGPName to MOE record
V3.06.30
19/01/2007
Add bSCIdentification/ CalledLocation/callingPartyRoamingInd/se rviceCategory/incomingCic/outgoingCic/m scSPC/incomingTKGPName/outgoingTK GPName to MCF record
V3.06.30
19/01/2007
Add terminatingRecordType/originalCalledNum ber/callingLocation/bSCIdentification/calle dPartyRoamingInd/serviceCategory/transac tionIdentification/incomingCic/outgoingCi c/mscSPC/incomingTKGPName/outgoing TKGPName to MTC record
V3.06.30
V5.0.0
V5.0.0
V5.0.0
V5.0.0
V5.1.0
V5.1.0
V5.1.0
V5.1.0
V3.06.20
V5.0.0
V5.1.0
19/01/2007
Add redirectNumber/bSCIdentification/serviceC ategory/incomingCic/outgoingCic/mscSPC /incomingTKGPName/outgoingTKGPNam e to ROAM record
V5.0.0
V5.1.0
19/01/2007
Add transactionIdentification to SS record
V3.06.30 V3.06.30
V5.0.0
V5.1.0
19/01/2007
Add gatewayRecordType/roamingNumber/redir ectNumber/incomingCic/outgoingCic/msc SPC/incomingTKGPName/outgoingTKGP Name /forwardCallIndicator to GATE/TRANSIT record
V5.0.0
V5.1.0
19/01/2007
Add transactionIdentification/mscSPC to SMSMO/SMSMT record
V3.06.30 V3.06.30
V5.0.0
V5.1.0
19/01/2007
Add incomingCic/outgoingCic /mscSPC /incomingTKGPName /outgoingTKGPName to TermCAMELInt record
V5.1.0
27/03/2007
Using MSCSPC14and MSCSPC24 ,to replace MSCSPC field ， Modify BSC Identificationt to SPC14
V3.06.30
V5.0.0 V5.0.0
V5.1.0
11/05/2007
Add the description of diagnostics
V3.06.30
V5.1.0
V5.2.0
18/09/2007
Add PartialRecordType,ServiceChangeInitiator, ReasonForServiceChange,TypeOfServiceC hange to
V3.07.10
ZTE Confidential Proprietary
II
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 MOC,MTC,MCF,GATEIN,GATEOUT record V3.07.10
to and
V3.07.10
to
V3.07.20
V5.1.0
V5.2.0
06/11/2007
Modify description of cUGOutgoingAccessUsed and cUGOutgoingAccessInd for MTC record Modify tag value of lcsClientExternalID for LCS record Add mscspc14 and mscspc24 to SS record
V5.1.0
V5.2.0
11/8/2007
Add “isdnBasicService” IncGatewayRecord OutGatewayRecord
12/13/2007
Add SmsRefrenceNumber filed cAMELSMSInformation. Add cAMELSMSInformation MTSMSRecord.
V3.07.20
03/04/2008
Modify the description of CUG Category field of Mobile Originated Call,Mobile Terminated Call,Roaming Call,Mobile Originated CallForwarding Call
V3.07.20
03/13/2008
Modify callingPartyRoamingInd and calledPartyRoamingInd to BOOLEAN Modify mscSPC14 to SPC14, mscSPC24 to SPC24 Modify the tag of userType to 1 Modify the asn.1 description of Cic to CICCode Modify recordExtensions to ManagementExtensions, causeForRecordClosing to CauseForTerm of MGCFRecord Modify the LocationAreaAndCell’s subfiled rncID to OPTIONAL
V3.07.20
V5.2.0
V5.2.0
V5.2.0
V5.3.0
V5.3.0
V5.3.0
to
V5.2.0
V5.3.0
03/18/2008
Modify the asn.1 description CallEventRecordType, sigMTPStatisticRecord to sigSCCPStatisticRecord to 42
V5.2.0
V5.3.0
04/01/2008
Add local free special service to service category.
V3.07.20
V5.2.0
V5.3.0
04/02/2008
Add falseAnswerCharge to causeForTerm.
V3.07.20
V5.2.0
V5.3.0
04/25/2008
Modify the definition of spc14 and spc24
V3.07.20
V5.2.0
V5.3.0
06/02/2008
Modify the definition of CICCode
V3.07.20
V5.3.0
V5.4.0
06/03/2008
Add transRoamingNumber ROAMRecord
to
V3.07.31 V3.07.31
06/11/2008
Add packing of 7-bit characters for MSISDN and originationNumber/destinationNumber of SMS, Modify the tag value definition of positioningData and MOLR-Type for LCS, Modify the ASN.1 description of BSCIdentification
V3.07.40
V3.07.40
V5.3.0
V5.4.0
of 41,
V5.4.0
V5.5.0
11/18/2008
Add “bscIdentification24” to MOCallRecord, MTCallRecord, ROAMRecord, MOECallRecord and MCFCallRecord
V5.4.0
V5.5.0
12/01/2008
Add cause code for causeForTerm.
ZTE Confidential Proprietary
III
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
V5.4.0
V5.5.0
V3.07.40
12/08/2008
Modify the value description of Category, Diagnostics, Fnur, GuaranteedBitRate, ISDN-AddressString, MaximumBitRate, RoutingNumber, ServiceCategory,SpeechVersionIdentifier, SS-Code.
V3.07.40
V5.4.0
V5.5.0
01/04/2009
Type of CAMELInformation, CAMELModificationParameters, CAMELSMSInformation, ChangedParameter, Incomplete-CDRIndication modify to SEQUENCE.
V5.6.0
02/27/2009
Add globalCallReference to MOC, MTC, MCF, MOE, TCI, ROAM, GATEIN, GATEOUT, SS, TRANSIT record.
V3.09.10
V5.5.0 V5.6.0
V5.6.0
03/02/2009
Add directSmsFlag to SMS-MO, SMS-MT record.
V3.09.10
V5.6.0
V5.6.0
03/02/2009
Modify type of dDCFlag, ServiceKey.
V3.09.10
V5.5.0
V5.6.0
04/03/2009
Delete freeFormatDataAppen from MTC record, Delete location from LCSNI record.
V3.09.10
V5.5.0
V5.6.0
04/14/2009
Modify type of changeOfClassmark
V3.09.10
V5.5.0
V5.6.0
04/27/2009
Modify value MTPServiceIdentifier
of
V3.09.10
V5.6.0
05/14/2009
Add eMLPPriorityLevel, eMLPRequestPriorityLevel fields to MTCallRecord
V3.09.10
V5.5.0
V5.6.1
15/07/2009
Add mNPRoutingNumber field to MOCallRecord, IncGatewayRecord and MCFCallRecord
V3.09.10
V5.6.0
V3.09.20
09/07/2009
Add mNPNumber, bypass, wANAPPS to MOCallRecord and MCFCallRecord, Add mNPNumber, isMultiMediaCall to IncGatewayRecord and OutGatewayRecord, Add mNPNumber, isMultiMediaCall, partialRecordType, reasonForServiceChange, serviceChangeInitiator, typeOfServiceChange to TransitRecord.
V3.09.21
V5.6.1
V5.7.0
description
V5.7.0
V5.8.0
05/09/2009
Add iuReleaseCause, aReleaseCause to MOCallRecord, MTCallRecord and MOECallRecord, Add numOfConcatenated, concatenatedRecordNum, concatenatedRef to MOSMSRecord and MTSMSRecord
V5.8.0
19/11/2009
Add description to the value of AReleaseCause and IuReleaseCause field
V3.09.21
V5.8.0
V5.8.0
16/12/2009
Modify the type of servedMSISDN to AddressString for HLRIntRecord, modify the length of IMEI to 1..8
V3.09.21
V5.8.0
V3.09.21
V3.10.10
V5.8.0
V5.8.0
25/12/2009
Add description of encoding as 2 octets for SS-Code, BearerServiceCode, TeleserviceCode, USSDDataCodingScheme, ServiceCategory, Category, LCSCause, SpeechVersionIdentifier field
V5.8.0
V5.9.0
6/1/2010
Add enumeration value TerminatingRecordType field
ZTE Confidential Proprietary
to
the
IV
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 V5.9.0
V6.0.0
15/3/2010
V4 cdr asn.1 format for cs
V4.10.10
V6.0.0
19/9/2010
Modify the maximum length of CallReference field from four bytes to five bytes
V4.10.12
V6.0.0
V4.10.12
15/12/2010
3.2.18 CallEventReocrdType ==> CallEventRecordType 3.2.124 PlmnId := ==> PlmnId::= 3.2.35 – NOT SUPPORT ==> -- NOT SUPPORT 3.2.56/3.2.5 Eparameter ==> EParameter 3.2.34 – NOT SUPPORT ==> -- NOT SUPPORT 3.2.30 CauseForTern ==> CauseForTerm 3.2.69 ISDNAddressString ==> ISDNAddressString 3.2.26 OPTINAL ==> OPTIONAL 3.1.3 OPTIONAL ==> OPTIONAL, 3.2.142 Sip-Method ==> SIP-Method 3.1.23 Delete MGCF,moSMSIWRecord,mtSMSGWReco rd
V4.10.13
V4.10.13
V6.0.0
V6.0.1
V6.0.1
V6.1.0
18/12/2010
1.Add isCAMELCall, dPNumber, gsmSCFAddress, mSCAddress, levelOfCAMELService, serviceKey, defaultCallHandling, networkCallReference to MOE 2.Add calledIMSI, calledIMEI, routingCategory to MOC 3.Add routingCategory to MTC and ROAM 4.Add fordwardedToIMSI, routingCategory to MCF 5.Add trunkLine to GATEIN, GATEOUT and TRANSIT 6.Add sMSLength to SMSMO and SMSMT
V6.1.0
V6.1.0
09/02/2011
Add tPMessageTypeIndicator SMSMO and SMSMT
V6.1.0
V6.1.0
18/02/2011
Add routingCategory to MOE
V4.10.13
V6.1.0
V6.1.0
04/03/2011
Add millisecDuration field to MOC etc.
V4.10.13
V6.1.0
V6.1.0
16/03/2011
Add rnPlusB field to GATEOUT
V4.10.13 V4.10.13
23/03/2011
Add location field to MCF, Add callReference to SMSMO and SMSMT Add description to the change of location field,which can record thirty groups location at most. Add locationExtension to SMSMO and SMSMT Add byPassFlag2 to MOC,MCF and TCI Add operatorId to MOC etc Modify the maximum length of BCDDirectoryNumber field from fourteen bytes to eighteen bytes
V4.10.20
1.Modify attribute of cdr fields, in order to enable 2.1 accord with 3.1.
V4.10.20
V6.1.0
V6.1.0
V6.1.0
V6.2.0
17/04/2011
V6.2.0
V6.2.0
24/05/2011
ZTE Confidential Proprietary
field
to
V
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 2.Modify the tag from simple type to structed type of incomingCic and outgoingCic in chapter 3.3
V6.2.0
V6.3.0
V6.3.0
V6.3.0
V6.4.0
V6.3.0
V6.3.0
V6.3.0
V6.4.0
V6.4.0
V4.11.10
9/10/2011
Add roamCamelInfomation to ROAM Add outPulsedNumber to MOC,GATEIN and TRANSIT,MCF Add some fields of camel information such as isCAMELCall to GATEIN and TRANSIT Add the description for CDR file that not organized block Add originalCalledNumber to MCF Add initialCalledNumber, connectedNumber to GATEIN, GATEOUT, TRANSIT Correct the field basicService encoding rule of SS to correspond with asn.1 syntax.
V4.11.10
21/11/2011
Correct the attributes of these fields(Unstructured SS Data, USSD operation code and USSD Service Code in USSD) to OPTIONAL
V4.11.10
6/1/2012
Correct the type of these fields(RoamCamelInfomation::destRouteN umber and TermCAMELIntRecord::destinationRoutin gAddres) to AddressString
V4.12.10
16/4/2012
1.Add sdcInterrogationFlag, callingNumberBeforeSDC, oriCalledNumberBeforeSDC, sdcInterrogatedCallingNumber, sdcInterrogatedOriCalledNumber to HLR 2.Add localOfficeForward, trafficType, startTime to MCF, Add trafficType, startTime to MTC, ROAM, TCI, TRANSIT Add forwardedToNumber, localOfficeForward, trafficType, startTime to GATEIN and GATEOUT to
V4.12.10
16/4/2012
Rename eMLPPriorityLevel eMLPPPriorityLevel, eMLPRequestPriorityLevel eMLPPRequestPriorityLevel.
of in
V4.12.10
to
V6.4.0
V6.4.0
25/4/2012
Correct the definition tPMessageTypeIndicator MOSMSRecord and MTSMSRecord. 1) Delete TP-MTI; 2) Add TPMsgType-MO; 3) Add TPMsgType-MT.
V6.4.0
27/4/2012
Correct the definition of moLCSRecord/mtLCSRecord/niLCSRecor d .additionalChgInfo to OPTIONAL
V4.12.10
V6.4.0
as
V4.12.10
V6.4.0
V6.4.0
21/5/2012
Add the cdrs of CAMEL4,such MOCCPHRecord,MCFCPHRecord, TCICPHRecord,NCSCPHRecord, GSICPHRecord
V6.4.0
V6.4.0
09/07/2012
Add hotBillingTag to MOCCPHRecord and MCFCPHRcord.
V4.12.10
V6.4.0
V6.4.0
23/07/2012
Add isCamelCall MOCCPHRecord,MCFCPHRecord,
V4.12.10
ZTE Confidential Proprietary
to
VI
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 NCSCPHRecord,GSICPHRecord. V6.4.0
V6.4.0
07/08/2012
Delete “...” in asn.1 definition
V4.12.10
V6.4.0
V6.4.0
8/30/12
Add the TAG value Definition of LCS additionChgInfo
V4.12.10
V6.4.0
V6.4.0
5/9/12
Add the frame in spc and bscid table
V4.12.10
V6.4.0
12/10/12
Add the Tag value definition of pcmUnit and channel in incomingCic and outgoingCic
V4.12.10
V6.4.0
V4.12.10
V6.4.0
V6.4.0
25/12/12
Correct the TAG value definition of location, changeOfLocation and basicService in MOC Correct the MSB and LSB definition of TrunkGroup
V6.4.0
V6.4.1
26/12/12
Add suppressCamelInd to MOCallRecord, MCFCallRecord, MOECallRecord
V4.12.10 V4.12.10
V4.12.10
V6.4.1
V6.4.1
21/1/2013
Modify the range of ExtGeographicalInformation and IMSI Delete the range of Eparameter, NumberOfForwarding and rncId
V6.4.1
V6.4.2
25/2/2013
Add basicService to SMSMO and SMSMT
5
Copyright © 2005 ZTE Corporation Shenzhen P. R. China
ZTE CONFIDENTIAL: This document contains proprietary information of ZTE Corporation and is not to be disclosed or used except in accordance with applicable agreements. Due to update and improvement of ZTE products and technologies, information of the document is subjected to change without notice.
ZTE Confidential Proprietary
VII
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Table of Contents 1
GENERAL INFORMATION..................................................................................................................1
1.1 Abbreviation.......................................................................................................................................1 1.2 Structure of the CDR File...................................................................................................................2 1.2.1 Field...........................................................................................................................................2 1.2.2 Charging Data Record...............................................................................................................2 1.2.3 Block...........................................................................................................................................2 10 1.2.4 CDR File....................................................................................................................................2 1.3 CDR Encoding....................................................................................................................................3 1.3.1 ASN.1 (Basic Encoding Rules) description................................................................................3 1.3.2 Encoding of the Tag....................................................................................................................3 1.3.3 Encoding of the length...............................................................................................................4 15 1.3.4 Encoding of the content..............................................................................................................4 1.3.5 ASN.1 BER Encoding of Integers...............................................................................................5 1.3.6 Structure Diagrams of Charging Data Record..........................................................................6 5
2 20
25
30
35
40
45
50
DESCRIPTION OF CDRS......................................................................................................................6 2.1 Record Types......................................................................................................................................6 2.1.1 Mobile Originated Call..............................................................................................................7 2.1.2 Mobile Terminated Call...........................................................................................................12 2.1.3 Roaming Call...........................................................................................................................16 2.1.4 Gateway Record.......................................................................................................................18 2.1.5 TRANSIT..................................................................................................................................23 2.1.6 SMS-MO...................................................................................................................................25 2.1.7 SMS-MT....................................................................................................................................26 2.1.8 Supplementary Service Call.....................................................................................................28 2.1.9 Mobile Originated Emergency Call.........................................................................................29 2.1.10 Mobile Originated Call Forwarding........................................................................................31 2.1.11 Common Equipment Usage Call..............................................................................................35 2.1.12 Terminating CAMEL Interrogation Call..................................................................................36 2.1.13 HLR Interrogation....................................................................................................................38 2.1.14 Mobile Terminated Location Request (MT-LR)........................................................................38 2.1.15 Mobile Originated Location Request (MO-LR).......................................................................39 2.1.16 Network Induced Location Request (NI-LR)............................................................................40 2.1.17 USSD Operation Record..........................................................................................................41 2.1.18 VIG Record...............................................................................................................................42 2.1.19 MTP3 Signnaling Record.........................................................................................................43 2.1.20 SCCP Signnaling Record.........................................................................................................44 2.1.21 CAMEL4 Mobile Originated Call............................................................................................44 2.1.22 CAMEL4 Mobile Originated Call Forwarding........................................................................47 2.1.23 Terminating CAMEL4 Interrogation Call................................................................................48 2.1.24 SCP Mobile Originated Call....................................................................................................50 2.1.25 Call Segment Record................................................................................................................51 2.2 Description of Fields........................................................................................................................52 2.2.1 Additional Charging Information.............................................................................................52 2.2.2 Amount Of Global Translated Messages..................................................................................53 2.2.3 Amount Of Messages................................................................................................................53 2.2.4 Amount Of Octets.....................................................................................................................53 2.2.5 AoC Parameters / Change of AoC Parameters........................................................................53 2.2.6 A Release Cause.......................................................................................................................53 2.2.7 Basic Service/Change of Service/ISDN Basic Service.............................................................53 2.2.8 Bill Type....................................................................................................................................54
ZTE Confidential Proprietary
VIII
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
2.2.9 2.2.10 2.2.11 2.2.12 2.2.13 2.2.14 2.2.15 2.2.16 2.2.17 2.2.18 2.2.19 2.2.20 2.2.21 2.2.22 2.2.23 2.2.24 2.2.25 2.2.26 2.2.27 2.2.28 2.2.29 2.2.30 2.2.31 2.2.32 2.2.33 2.2.34 2.2.35 2.2.36 2.2.37 2.2.38 2.2.39 2.2.40 2.2.41 2.2.42 2.2.43 2.2.44 2.2.45 2.2.46 2.2.47 2.2.48 2.2.49 2.2.50 2.2.51 2.2.52 2.2.53 2.2.54 2.2.55 2.2.56 2.2.57 2.2.58 2.2.59 2.2.60 2.2.61 2.2.62 2.2.63 2.2.64 2.2.65 2.2.66 2.2.67 2.2.68
BSC Identification....................................................................................................................54 BSC Identification 24...............................................................................................................54 BYPASS.....................................................................................................................................54 BYPASS Flag 2.........................................................................................................................54 Call Duration...........................................................................................................................54 Called IMEI..............................................................................................................................55 Called IMSI..............................................................................................................................55 Call Segment Id........................................................................................................................56 Call Reference..........................................................................................................................56 Calling/Called Location...........................................................................................................56 Calling/Called Party Roaming Indicator.................................................................................56 Calling/Called/Connected/Translated Number........................................................................56 Calling Number Before SDC Interrogation.............................................................................57 Calling Party Number..............................................................................................................57 CAMEL Call Leg Information..................................................................................................57 CAMEL Information.................................................................................................................57 CAMEL Information Millisecond Duration.............................................................................57 CAMEL Initiated CF Indicator................................................................................................58 CAMEL Modified Service Centre.............................................................................................58 CAMEL SMS Information........................................................................................................58 CAMEL CPH Call Leg Information.........................................................................................58 CAMEL CPH Information........................................................................................................59 Cause for Termination..............................................................................................................59 Channel Coding Accepted/Channel Coding Used...................................................................59 Charged Neighbor SPC............................................................................................................59 Concatenated Record Number.................................................................................................60 Concatenated SMS Reference..................................................................................................60 Connected Number...................................................................................................................60 CS Allocation/Retention Priority (CARP)................................................................................60 CUG Category.........................................................................................................................60 CUG InterLockCode................................................................................................................60 CUG Index...............................................................................................................................61 CUG Incoming Access Indicator..............................................................................................61 CUG Incoming Access Used....................................................................................................61 CUG Outgoing Access Used....................................................................................................61 CUG Outgoing Access Indicator..............................................................................................61 Data Rate.................................................................................................................................61 Data Volume.............................................................................................................................61 DDCFlag..................................................................................................................................62 Default Call/SMS Handling.....................................................................................................62 Destination Number.................................................................................................................62 Diagnostics...............................................................................................................................62 Dialed Number.........................................................................................................................62 Direct SMS Flag.......................................................................................................................62 DPC..........................................................................................................................................62 DPNumber................................................................................................................................63 EMLPP Priority Level..............................................................................................................63 EMLPP Request Priority Level................................................................................................63 EMS-Digits...............................................................................................................................63 EMS-Key..................................................................................................................................63 Equipment ID...........................................................................................................................63 Equipment Type........................................................................................................................63 Error Code...............................................................................................................................64 Event Time Stamps...................................................................................................................64 Exchange Identity.....................................................................................................................65 Fixed Network User Rate.........................................................................................................65 Free Format Data....................................................................................................................65 Forward Call Indicator............................................................................................................65 Forwarded To IMSI..................................................................................................................65 Forwarded To Number.............................................................................................................65
ZTE Confidential Proprietary
IX
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
2.2.69 2.2.70 2.2.71 2.2.72 2.2.73 2.2.74 2.2.75 2.2.76 2.2.77 2.2.78 2.2.79 2.2.80 2.2.81 2.2.82 2.2.83 2.2.84 2.2.85 2.2.86 2.2.87 2.2.88 2.2.89 2.2.90 2.2.91 2.2.92 2.2.93 2.2.94 2.2.95 2.2.96 2.2.97 2.2.98 2.2.99 2.2.100 2.2.101 2.2.102 2.2.103 2.2.104 2.2.105 2.2.106 2.2.107 2.2.108 2.2.109 2.2.110 2.2.111 2.2.112 2.2.113 2.2.114 2.2.115 2.2.116 2.2.117 2.2.118 2.2.119 2.2.120 2.2.121 2.2.122 2.2.123 2.2.124 2.2.125 2.2.126 2.2.127 2.2.128
Forward Type...........................................................................................................................65 Forwarded Sub. Number..........................................................................................................66 Free Format Data Append Indicator.......................................................................................66 Gateway Record Type...............................................................................................................66 Global Call Reference..............................................................................................................66 GsmSCF Address......................................................................................................................66 Guaranteed Bit Rate.................................................................................................................67 Hot Billing Tag.........................................................................................................................67 Hot Billing Tag 2......................................................................................................................67 HSCSD Parameters/Change of HSCSD Parameters...............................................................67 Incoming/Outgoing Cic............................................................................................................68 Incoming/Outgoing TKGP.......................................................................................................68 Incoming/Outgoing TKGP Name.............................................................................................68 Incoming/OutgoingTraffic Type...............................................................................................68 InitialCalledNumber................................................................................................................68 Inter Operator Identifiers.........................................................................................................68 Interrogation Result.................................................................................................................68 Is CAMEL Call.........................................................................................................................69 Is CUG Used............................................................................................................................69 Is MultiMedia Call...................................................................................................................69 Is HSCSD Used........................................................................................................................69 Iu Release Cause......................................................................................................................69 Last Long Part Indicator..........................................................................................................69 LCS Cause................................................................................................................................69 LCS Client Identity...................................................................................................................69 LCS Client Type........................................................................................................................70 LCS Priority.............................................................................................................................70 LCS QoS...................................................................................................................................70 Level of CAMEL Service..........................................................................................................70 LocalOfficeForward.................................................................................................................70 Location/Change of Location...................................................................................................70 Location Estimate.................................................................................................................71 Location Extension...............................................................................................................71 Location Type.......................................................................................................................71 Maximum Bit Rate................................................................................................................71 Measure Duration................................................................................................................71 Message Reference...............................................................................................................72 Millisecond Duration...........................................................................................................72 MLC Number........................................................................................................................72 MNPNumber........................................................................................................................72 MNP Roaming Number........................................................................................................72 Mobile station Classmark/Change of Classmark.................................................................72 MOLR Type..........................................................................................................................72 MSC Address........................................................................................................................73 Msc SPC14...........................................................................................................................73 Msc SPC24...........................................................................................................................73 MSC Server Indication.........................................................................................................73 Network Call Reference........................................................................................................73 No Reply CondTime..............................................................................................................73 Notification to MS user........................................................................................................73 Num of Concatenated SMS...................................................................................................74 Number of DP Encountered.................................................................................................74 Number of Forwarding.........................................................................................................74 Old/New Location................................................................................................................74 OPC......................................................................................................................................74 Operator ID..........................................................................................................................74 Original Called Number......................................................................................................74 Origination Number.............................................................................................................75 Original Called Number Before SDC Interrogation............................................................75 Partial Record Type..............................................................................................................75
ZTE Confidential Proprietary
X
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
3
2.2.129 Personal Back Ring Tone Indicator (PBRT)........................................................................75 2.2.130 Positioning Data..................................................................................................................75 2.2.131 Privacy Override..................................................................................................................75 2.2.132 Radio Channel Requested/Radio Channel Used/Change of Radio Channel/Speech Version Supported/Speech Version Used...............................................................................................................75 2.2.133 Rate Indication.....................................................................................................................76 2.2.134 Reason for Service Change..................................................................................................76 2.2.135 Record Extensions................................................................................................................76 2.2.136 Record Sequence Number....................................................................................................76 2.2.137 Record Type..........................................................................................................................77 2.2.138 Recording Entity...................................................................................................................77 2.2.139 Redirect Number...................................................................................................................77 2.2.140 Redirecting Number.............................................................................................................77 2.2.141 Retransmission.....................................................................................................................77 2.2.142 Roaming Number.................................................................................................................77 2.2.143 Routing Category.................................................................................................................77 2.2.144 Routing Number...................................................................................................................77 2.2.145 SDC Interrogated Calling Number......................................................................................78 2.2.146 SDC Interrogation Flag.......................................................................................................78 2.2.147 SDC Interrogated Original Called Number.........................................................................78 2.2.148 Sequence Number.................................................................................................................78 2.2.149 Served IMEI.........................................................................................................................78 2.2.150 Served IMSI..........................................................................................................................78 2.2.151 Served MSISDN....................................................................................................................78 2.2.152 Service Category..................................................................................................................79 2.2.153 Service Centre Address.........................................................................................................79 2.2.154 Service Change Initiator......................................................................................................79 2.2.155 Service Identifier..................................................................................................................79 2.2.156 Service Key...........................................................................................................................79 2.2.157 Short Message Service Result..............................................................................................79 2.2.158 SMS Length..........................................................................................................................79 2.2.159 SPC.......................................................................................................................................79 2.2.160 Speech Version Supported/Speech Version Used.................................................................80 2.2.161 Start Time.............................................................................................................................80 2.2.162 System Type..........................................................................................................................80 2.2.163 SSN.......................................................................................................................................80 2.2.164 Subscriber Category.............................................................................................................80 2.2.165 Supplementary Service(s).....................................................................................................80 2.2.166 Supplementary Service Action..............................................................................................81 2.2.167 Supplementary Service Action Result...................................................................................81 2.2.168 Supplementary Service Parameters.....................................................................................81 2.2.169 Suppress CAMEL Indicator..................................................................................................81 2.2.170 Terminating Record Type......................................................................................................81 2.2.171 Term CAMEL Call Type.......................................................................................................81 2.2.172 TP Message Type Indicator..................................................................................................81 2.2.173 Transaction Identification....................................................................................................82 2.2.174 Transparency Indicator........................................................................................................82 2.2.175 Trunk Line............................................................................................................................82 2.2.176 Type of service change.........................................................................................................82 2.2.177 Unstructured SS Data...........................................................................................................82 2.2.178 USSD interaction count........................................................................................................82 2.2.179 Ussd data coding scheme.....................................................................................................82 2.2.180 USSD operation code...........................................................................................................83 2.2.181 USSD Service Code..............................................................................................................83 2.2.182 VIG Call Type.......................................................................................................................83 2.2.183 WANAPPS............................................................................................................................83 ASN.1 DEFINITIONS FOR CDRS......................................................................................................83 3.1 CDR Structure..................................................................................................................................83 3.1.1 CallEventRecord......................................................................................................................83
ZTE Confidential Proprietary
XI
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
3.1.2 MOCallRecord.........................................................................................................................84 3.1.3 MTCallRecord..........................................................................................................................85 3.1.4 ROAMRecord...........................................................................................................................87 3.1.5 IncGatewayRecord...................................................................................................................88 3.1.6 OutGatewayRecord..................................................................................................................89 3.1.7 TransitRecord...........................................................................................................................90 3.1.8 MOSMSRecord.........................................................................................................................91 3.1.9 MTSMSRecord.........................................................................................................................92 3.1.10 SSActionRecord........................................................................................................................92 3.1.11 MOECallRecord.......................................................................................................................93 3.1.12 MCFCallRecord.......................................................................................................................94 3.1.13 CommonEquipRecord..............................................................................................................95 3.1.14 TermCAMELIntRecord.............................................................................................................96 3.1.15 HLRIntRecord..........................................................................................................................97 3.1.16 MTLCSRecord..........................................................................................................................97 3.1.17 MOLCSRecord.........................................................................................................................98 3.1.18 NILCSRecord...........................................................................................................................98 3.1.19 USSDRecord.............................................................................................................................99 3.1.20 VIGRecord................................................................................................................................99 3.1.21 SigMTPStatisticRecord............................................................................................................99 3.1.22 SigSCCPStatisticRecord.........................................................................................................100 3.1.23 MOCPHRecord......................................................................................................................100 3.1.24 MCFCPHRecord....................................................................................................................101 3.1.25 TCICPHRecord......................................................................................................................102 3.1.26 GSICPHRecord......................................................................................................................102 3.1.27 NCSCPHRecord.....................................................................................................................103 3.2 CDR Fields Structure......................................................................................................................104 3.2.1 AdditionalChgInfo..................................................................................................................104 3.2.2 AddressString.........................................................................................................................104 3.2.3 AiurRequested........................................................................................................................104 3.2.4 AOCParameters.....................................................................................................................105 3.2.5 AOCParmChange..................................................................................................................105 3.2.6 AReleaseCause.......................................................................................................................105 3.2.7 BasicServiceCode...................................................................................................................106 3.2.8 BasicServices..........................................................................................................................106 3.2.9 BearerServiceCode.................................................................................................................106 3.2.10 BCDDirectoryNumber...........................................................................................................108 3.2.11 BillOrValidateFlag.................................................................................................................109 3.2.12 BSCIdentification...................................................................................................................109 3.2.13 BSCIdentification24...............................................................................................................109 3.2.14 CallDuration...........................................................................................................................110 3.2.15 CalledNumber.........................................................................................................................110 3.2.16 CalledPartyNumber................................................................................................................110 3.2.17 CallEventRecordType.............................................................................................................110 3.2.18 CallingNum.............................................................................................................................110 3.2.19 CallingNumber.......................................................................................................................110 3.2.20 CallingPartyCategory............................................................................................................110 3.2.21 CallSegmentId........................................................................................................................110 3.2.22 CallReference..........................................................................................................................111 3.2.23 CAMELDestinationNumber....................................................................................................111 3.2.24 CAMELInformation................................................................................................................111 3.2.25 CAMELInitCFIndicator..........................................................................................................111 3.2.26 CAMELModificationParameters............................................................................................111 3.2.27 CAMELSMSInformation.........................................................................................................112 3.2.28 CAMELCPHInformation........................................................................................................112 3.2.29 Carp........................................................................................................................................112 3.2.30 Category.................................................................................................................................112 3.2.31 CauseForTerm........................................................................................................................113 3.2.32 ChangedParameters...............................................................................................................113 3.2.33 ChangeFlags...........................................................................................................................114
ZTE Confidential Proprietary
XII
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
3.2.34 3.2.35 3.2.36 3.2.37 3.2.38 3.2.39 3.2.40 3.2.41 3.2.42 3.2.43 3.2.44 3.2.45 3.2.46 3.2.47 3.2.48 3.2.49 3.2.50 3.2.51 3.2.52 3.2.53 3.2.54 3.2.55 3.2.56 3.2.57 3.2.58 3.2.59 3.2.60 3.2.61 3.2.62 3.2.63 3.2.64 3.2.65 3.2.66 3.2.67 3.2.68 3.2.69 3.2.70 3.2.71 3.2.72 3.2.73 3.2.74 3.2.75 3.2.76 3.2.77 3.2.78 3.2.79 3.2.80 3.2.81 3.2.82 3.2.83 3.2.84 3.2.85 3.2.86 3.2.87 3.2.88 3.2.89 3.2.90 3.2.91 3.2.92 3.2.93
ChangeOfClassmark...............................................................................................................114 ChangeOfRadioChannel.........................................................................................................114 ChangeOfService....................................................................................................................114 ChannelCoding.......................................................................................................................114 ChargeIndicator.....................................................................................................................114 ChargedParty.........................................................................................................................115 CICCode.................................................................................................................................115 Classmark...............................................................................................................................115 ConnectedNumber..................................................................................................................115 CUGCategory.........................................................................................................................115 CUGIndex...............................................................................................................................115 CUGInterLockCode................................................................................................................115 DataRate.................................................................................................................................115 DataVolume............................................................................................................................116 DDCFlag................................................................................................................................116 DefaultCallHandling..............................................................................................................116 DefaultSMS-Handling............................................................................................................116 DeferredLocationEventType...................................................................................................116 DestinationRoutingAddress....................................................................................................116 Diagnostics.............................................................................................................................116 DirectSMSFlag.......................................................................................................................119 EMLPPPriorityLevel..............................................................................................................119 EMLPPRequestPriorityLevel.................................................................................................120 Eparameter.............................................................................................................................120 EquipmentId...........................................................................................................................120 EquipmentType.......................................................................................................................120 Ext-GeographicalInformation................................................................................................120 Fnur........................................................................................................................................120 ForwardCallIndicator............................................................................................................120 ForwardedSubNumber...........................................................................................................120 ForwardToNumber.................................................................................................................120 FreeFormatData....................................................................................................................121 GatewayRecordType...............................................................................................................121 GenericNumber......................................................................................................................121 GenericNumbers....................................................................................................................121 GlobalCallReference..............................................................................................................121 Gsm-SCFAddress....................................................................................................................121 GuaranteedBitRate.................................................................................................................121 HLRIntResult..........................................................................................................................121 HotBillingTag.........................................................................................................................121 HotBillingTag2.......................................................................................................................121 HSCSDParmsChange............................................................................................................122 IMEI.......................................................................................................................................122 IMSI........................................................................................................................................122 InitiatingParty........................................................................................................................122 InterOperatorIdentifiers.........................................................................................................122 IPAddress................................................................................................................................122 IPBinaryAddress....................................................................................................................122 IPTextRepresentedAddress.....................................................................................................123 ISDN-AddressString...............................................................................................................123 ISDN-SubaddressString.........................................................................................................123 IuReleaseCause......................................................................................................................123 LCSCause...............................................................................................................................125 LCSClientExternalID.............................................................................................................125 LCSClientInternalID..............................................................................................................125 LCSClientIdentity...................................................................................................................126 LCSClientType........................................................................................................................126 LCS-Priority...........................................................................................................................126 LCSQoSInfo............................................................................................................................126 LevelOfCAMELService..........................................................................................................127
ZTE Confidential Proprietary
XIII
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
3.2.94 3.2.95 3.2.96 3.2.97 3.2.98 3.2.99 3.2.100 3.2.101 3.2.102 3.2.103 3.2.104 3.2.105 3.2.106 3.2.107 3.2.108 3.2.109 3.2.110 3.2.111 3.2.112 3.2.113 3.2.114 3.2.115 3.2.116 3.2.117 3.2.118 3.2.119 3.2.120 3.2.121 3.2.122 3.2.123 3.2.124 3.2.125 3.2.126 3.2.127 3.2.128 3.2.129 3.2.130 3.2.131 3.2.132 3.2.133 3.2.134 3.2.135 3.2.136 3.2.137 3.2.138 3.2.139 3.2.140 3.2.141 3.2.142 3.2.143 3.2.144 3.2.145 3.2.146 3.2.147 3.2.148 3.2.149 3.2.150 3.2.151 3.2.152 3.2.153
LocationAreaAndCell.............................................................................................................127 LocationAreaCode..................................................................................................................127 LocationChange.....................................................................................................................127 LocationEstimateType............................................................................................................127 LocationCellExtension...........................................................................................................128 LocationType..........................................................................................................................128 LongPartSeqNumber..........................................................................................................128 ManagementExtensions......................................................................................................128 MaximumBitRate................................................................................................................128 McfType..............................................................................................................................128 MessageReference..............................................................................................................128 MOLR-Type........................................................................................................................128 MSCAddress.......................................................................................................................129 MSISDN..............................................................................................................................129 MTPServiceIdentifier.........................................................................................................129 NetworkCallReference........................................................................................................129 NoReplyCondTime..............................................................................................................129 NotificationToMSUser........................................................................................................129 NumberOfDPEncountered.................................................................................................129 NumberOfForwarding........................................................................................................129 NumOfHSCSDChanAllocated............................................................................................129 NumOfHSCSDChanRequested...........................................................................................130 OriginalCalledNumber......................................................................................................130 PartialRecordType..............................................................................................................130 Pbrt.....................................................................................................................................130 PlmnId................................................................................................................................130 PositioningData.................................................................................................................130 RadioChanRequested.........................................................................................................131 RateIndication....................................................................................................................131 RecordingEntity..................................................................................................................131 ReasonForServiceChange..................................................................................................131 RecordSeqNumber..............................................................................................................131 RedirectingNumber............................................................................................................132 RncID.................................................................................................................................132 RoamCamelInfomation......................................................................................................132 RoamingNumber................................................................................................................132 RoutingCategory................................................................................................................132 RoutingNumber..................................................................................................................132 ServiceCategory.................................................................................................................132 ServiceID............................................................................................................................133 ServiceKey..........................................................................................................................133 SMSLength.........................................................................................................................133 SMSResult..........................................................................................................................134 SPC14.................................................................................................................................134 SPC24.................................................................................................................................134 SPCCode............................................................................................................................134 SpeechVersionIdentifier......................................................................................................134 SSActionResult...................................................................................................................135 SSActionType......................................................................................................................135 SS-Code..............................................................................................................................135 SSNCode.............................................................................................................................137 SSParameters.....................................................................................................................137 SubscriberCategory............................................................................................................137 SuppServiceUsed................................................................................................................137 SystemType.........................................................................................................................138 TrafficType..........................................................................................................................138 TBCD-STRING...................................................................................................................138 TeleserviceCode.................................................................................................................138 TermCAMELCallType........................................................................................................139 TerminatingRecordType......................................................................................................139
ZTE Confidential Proprietary
XIV
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
4 45
3.2.154 TimeStaTimeStamp.............................................................................................................139 3.2.155 TKGPName........................................................................................................................140 3.2.156 TPMsgType-MO.................................................................................................................140 3.2.157 TPMsgType-MT..................................................................................................................140 3.2.158 TrafficChannel....................................................................................................................140 3.2.159 TranslatedNumber..............................................................................................................140 3.2.160 TransparencyInd.................................................................................................................140 3.2.161 TrunkGroup........................................................................................................................141 3.2.162 TrunkLine...........................................................................................................................141 3.2.163 TypeOfServiceChange........................................................................................................141 3.2.164 USSDDataCodingScheme..................................................................................................141 3.2.165 USSDOperationCode.........................................................................................................143 3.2.166 USSDServiceCode..............................................................................................................144 3.2.167 VIGCallType.......................................................................................................................144 3.3 TAG Value Definition.....................................................................................................................144 3.3.1 CallEventRecord....................................................................................................................144 3.3.2 MOCallRecord.......................................................................................................................144 3.3.3 MTCallRecord........................................................................................................................148 3.3.4 ROAMRecord.........................................................................................................................151 3.3.5 IncGatewayRecord.................................................................................................................153 3.3.6 OutGatewayRecord................................................................................................................155 3.3.7 TransitRecord.........................................................................................................................156 3.3.8 MOSMSRecord.......................................................................................................................157 3.3.9 MTSMSRecord.......................................................................................................................158 3.3.10 SSActionRecord......................................................................................................................159 3.3.11 MOECallRecord.....................................................................................................................160 3.3.12 MCFCallRecord.....................................................................................................................162 3.3.13 CommonEquipRecord............................................................................................................165 3.3.14 TermCAMELIntRecord...........................................................................................................165 3.3.15 HLRIntRecord........................................................................................................................167 3.3.16 LCSMTRecord........................................................................................................................167 3.3.17 LCSMORecord.......................................................................................................................168 3.3.18 LCSNIRecord.........................................................................................................................169 3.3.19 USSDRecord...........................................................................................................................170 3.3.20 VIGRecord..............................................................................................................................170 3.3.21 SigMTPStatisticRecord..........................................................................................................171 3.3.22 sigSCCPStatisticRecord.........................................................................................................171 3.3.23 MOCPHRecord......................................................................................................................171 3.3.24 MCFCPHRecord....................................................................................................................174 3.3.25 TCICPHRecord......................................................................................................................176 3.3.26 GSICPHRecord......................................................................................................................178 3.3.27 NCSCPHRecord.....................................................................................................................180 ANNEX..................................................................................................................................................182 4.1 4.2
Packing of 7-bit characters.............................................................................................................182 Description of Version Number......................................................................................................183
ZTE Confidential Proprietary
XV
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Figures and Tables Figures Figure 1 Figure 2
5
Structure Diagrams of Block....................................................2 Structure Diagrams of CDR File..............................................2
......3 Figure 3 Structure Diagrams of CDR File organized by CDR................3 Figure 4 Structure Diagrams of Charging Data Record..........................6 Figure 5.............................................Definition of version number 183
10
Tables
15
Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 Table 23 Table 24
20
25
30
35
ZTE Confidential Proprietary
MOC Record............................................................................7 MTC Record...........................................................................12 Roaming record......................................................................16 Incoming Gateway Record.....................................................19 Outgoing Gateway Record.....................................................21 Transit Record........................................................................23 SMSMO Record....................................................................25 SMSMT Record....................................................................26 SSAction Record...................................................................28 MOC Emergency Record.......................................................29 Mobile Originated Call Forwarding Record...........................31 Common Equipment Usage Record.......................................35 Terminating CAMEL Record.................................................36 HLR Interrogation Record......................................................38 LCSMT record......................................................................38 LCSMO record......................................................................39 LCSNI record........................................................................40 USSD record..........................................................................41 VIG record.............................................................................42 MTP3 Signnaling Record.......................................................43 SCCP Signnaling Record.......................................................44 CAMEL4 MOC Record.........................................................44 CAMEL4 Mobile Originated Call Forwarding Record..........47 Terminating CAMEL4 record................................................48
XVI
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
Table 25 SCP MOC Record..................................................................50 Table 26 Call Segment Record..............................................................51 Table 27 CallEventRecord Tag Values...............................................144 Table 28 MOCallRecord Tag Values..................................................144 Table 29 MTCallRecord Tag Values...................................................148 Table 30 ROAMRecord Tag Values...................................................151 Table 31 IncGatewayRecord Tag Values............................................153 Table 32 OutGatewayRecord Tag Values...........................................154 Table 33 TransitRecord Tag Values....................................................155 Table 34 MOSMSRecord Tag Values.................................................157 Table 35 MTSMSRecord Tag Values.................................................158 Table 36 SSActionRecord Tag Values................................................159 Table 37 MOECallRecord Tag Values................................................160 Table 38 MCFCallRecord Tag Values................................................161 Table 39 CommonEquipRecord Tag Values.......................................164 Table 40 TermCAMELIntRecord Tag Values.....................................165 Table 41 HLRIntRecord Tag Values...................................................166 Table 42 LCSMTRecord Tag Values..................................................167 Table 43 LCSMORecord Tag Values..................................................168 Table 44 LCSNIRecord Tag Values....................................................168 Table 45 USSDRecord Tag Values.....................................................169 Table 46 VIGRecord Tag Values........................................................170 Table 47 SigMTPStatisticRecord Tag Valies......................................170 Table 48 sigSCCPStatisticRecord Tag Values....................................170 Table 49 MOCPHRecord Tag Values.................................................171 Table 50 MCFCPHRecord Tag Values...............................................173 Table 51 TCICPHRecord Tag Values.................................................175 Table 52 GSICPHRecord Tag Values.................................................177 Table 53............................................ NCSCPHRecord Tag Values 179
10
15
20
25
30
ZTE Confidential Proprietary
XVII
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
1
GENERAL INFORMATION
1.1
Abbreviation Abb.
Full Name
AoC
Advice of Charge
CAMEL
Customised Applications for Mobile network Enhanced Logic
CPH
Call Party Handling
CSA
Call Segment Association
CAP
Camel Application Part
CSI
Camel Subscription Information
DP
Detection Point
GMSC
Gateway MSC
gsmSCF
GSM Service Control Function
gsmSSF
GSM Service Switching Function
gsmSRF
GSM Specialized Resource Function
HLR
Home Location Register
HPLMN
Home PLMN
HSCSD
High Speed Circuit Switched Data
IMEI
International Mobile Equipment Identity
IMS
IP Multimedia Subsystem
IMSI
International Mobile Subscriber Identity
ISDN
Integrated Services Digital Network
MOC
Mobile Originated Call (attempt)
MS
Mobile Station
MSC
Mobile Services Switching Centre
MSRN
Mobile Station Roaming Number
MTC
Mobile Terminated Call (attempt)
O-CSI
Originating CAMEL Subscription Information
OMC
Operations and Maintenance Centre
PLMN
Public Land Mobile Network
SAC
Service Area Code
SIP
Session Initiation Protocol
SMS
Short Message Service
T-CSI
Terminating CAMEL Subscription Information
TDP
Trigger Detection Point
USSD
Unstructured Supplementary Service Data
VIG
Video Internet GateWay
VLR
Visitor Location Register
VMSC
Visited MSC
VPLMN
Visited PLMN
MNP
Mobile Number Portability
CSFB
CS Fall Back
SDC
Subscriber Data Center
ZTE Confidential Proprietary
Page 1 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
1.2
Structure of the CDR File
1.2.1
Field Basic data unit, which is the basic element forming the ticket record. Each field has its own tag and length (Len). The field can be divided into fixed length field and non-fixed length field.
5 1.2.2
Charging Data Record Record the billing information related to a chargeable event. Each CDR contains multiple fields. Each CDR length can not exceed max.2048 bytes.
10 1.2.3
Block The block contains one or more (n) CDRs with variable lengths (L). The block has a fixed size (2048 bytes). It is filled with CDRs until there is no more room to add the next record. The rest of the fixed size block will then be filled with fillers(H’FF).
15 Figure 1 Structure Diagrams of Block
1.2.4
CDR File The CDR file consists of one or multiple “Blocks”. MSC Server will generate a CDR file at the specified time or the specified length according to the system configuration.
20
Figure 2 Structure Diagrams of CDR File
The CDR file consists of one or multiple “CDRs” when organized by CDR. MSC Server will generate a CDR file at the specified time or the specified length according to the system configuration.
25
ZTE Confidential Proprietary
Page 2 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Figure 3 Structure Diagrams of CDR File organized by CDR
1.3
CDR Encoding
1.3.1
ASN.1 (Basic Encoding Rules) description
5
The CDRs generated at MSC Server is specified using the Abstract Syntax Notation One (ASN.1). ASN.1 is a language that defines the way data is sent across dissimilar communication systems. ASN.1 ensures that the data received is the same as the data transmitted by providing a common syntax for specifying application layer protocols. ASN.1 is an ISO/ITU-T standard based on the OSI model and is defined in “ASN.1 encoding rules: Specification of Basic Notation, ITU-T Recommendation X.680”.
10
The MSC Server uses ASN.1 Basic Encoding Rules (BER) to encode the CDRs. BER is a set of standard rules, defined in “ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) ITU-T Recommendation X.690”, for encoding data types specified in ASN.1. A field containing a value of a certain data type is encoded into the following parts:
15
1. Identifier: identifies the data type and consists of an ASN.1 tag and data structure information 2. Length: the length of the content part in number of octets 3. Contents: the value encoded according to data type specific rules
20
The ASN.1 tags assigned to CDR fields are specified in chapter 3.3.
1.3.2
Encoding of the Tag The identifier octets encode the ASN.1 tag of the data value. Two possibilities exist:
25
1. single octet encoding for tag numbers from 0 to 30 (inclusive)
Bits 8-7
Class identifier 00 Universal 01 Application 10 Context-specific 11 Private
Bit 6
0 1
Bit 5-1
binary integer with bit 5 as msb
Primitive Constructed
2. Use of a leading octet for tag numbers bigger than or equal to 31 The leading octet is encoded as follows:
ZTE Confidential Proprietary
Page 3 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Bits 8-7
Class identifier as for single octet id
Bit 6
0 1
Bit 5-1
all bits set to 1
Primitive Constructed
Subsequent octets are encoded as:
1.3.3 5
Bits 8
set to 1 in all non-last subsequent octets
Bit 7-1
Bits 7-1 of all subsequent octets encoded as a binary integer equal to the tag number with bit 7 of the first subsequent octet as most significant bit.
Encoding of the length The length octets encode the length of the following content of the data item. Three possibilities exist in ASN.1: short, long and indefinite. The indefinite variant is not used in this CDR format. 1. short length encoding for length from 0 to 127 (inclusive)
10
LLLLLLL represents the length of the content 2. long length encoding for length > 127
LLLLLLLL represents the length of the content
1.3.4 15
Encoding of the content The numbering of bits within one octet and the encoding of a binary value in an octet structure can be found in the following figure:
ZTE Confidential Proprietary
Page 4 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
bit 8 of octet 1 is the most significant bit (msb), bit 1 of octet n is the least significant bit (lsb)
51.3.5
ASN.1 BER Encoding of Integers
10
ASN.1 defines the integer type as a simple type with distinguished values, which are the positive and negative numbers, including zero. The content part for a field of type integer is BER encoded in one or more octets. The content octets contain the two’s complement binary number equal to the integer value, and consisting of bits 8 to 1 of the first octet, followed by bit 8 to 1 of each octet in turn up to and including the last content octet. The two’s complement form implies that the most significant bit of the content octets indicates the sign of the value (0 for positive numbers and 1 for negative numbers). This means that the highest positive number a sequence of X octets can represent is: 2(8X-1)-1.
15
Example-1: The highest positive number represented by four octets (32 bits) is: 2 31-1. Example-2: To represent the highest value for a 32 bits positive integer (2 32-1), five content octets are needed
ZTE Confidential Proprietary
Page 5 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
1.3.6
Structure Diagrams of Charging Data Record
Figure 4 Structure Diagrams of Charging Data Record
5
10
2 152.1
DESCRIPTION OF CDRS Record Types Field category definition: M:Mandatory field. All the fields marked with “M” must be present in CDRs. C:This field shall be present in CDRs only when the specified conditions are satisfied. These conditions are specified as part of the field definition.
ZTE Confidential Proprietary
Page 6 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
OM:This field must be included in CDRs if operators require that it is present in CDRs. In other words, the specified OM field, as a mandatory parameter, shall be present. OC:This field must be included in CDRs if operators require that it is present in CDRs in the case that the specified conditions are satisfied. In other words, a field configured to QC must be present when conditions are satisfied.
5 2.1.1
Mobile Originated Call
10
A mobile originated call (MOC) record the charging information of a caller (mobile subscriber) during a call, and the information serves as the original voucher of charging submitted by the MSC to the billing center for the caller. Table 1
MOC Record
Field
Category
Description
Record Type
M
Mobile originated record
Served IMSI
M
IMSI of the calling party
Served IMEI
C
IMEI of the calling ME , if available.
Served MSISDN
OM
The primary MSISDN of the calling party
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Translated Number
OC
The called number after digit translation within the MSC (if applicable)
Connected Number
OC
The number of the connected party if different to the Called Number
Roaming Number
OC
The Mobile Station Roaming Number employed to route this connection, if applicable.
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Incoming TKGP
OC
The MSC trunk group on which the call originated , usually from the BSS. If available in 3G, this parameter shall be supplied.
Outgoing TKGP
OC
The trunk group on which the call left the MSC. If available in 3G, this parameter shall be supplied.
Location
M
The identity of the cell or the SAC at the time of CDR creation, including the location area code.
Change of Location
OC
A list of changes in Location Area Code / Service Area Code / Cell Id. Each time-stamped.
Basic service
M
Bearer or teleservice employed.
C
Indicates whether the basic service was used in transparent or non-transparent mode. This parameter is provided only for those basic services which may be employed in both transparent and non-transparent mode.
OC
A list of changes of basic service during a connection each time-stamped.
C
Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked.
OC
The charge advice parameters sent to the MS on call set-up. This field shall be supplied only when AoC parameters have been sent.
Transparency Indicator
Change of Service Supp. Services
AOC Parameters
ZTE Confidential Proprietary
Page 7 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
OC
New AOC parameters sent to the MS e.g. as a result of a tariff switch over, including the time at which the new set was applied. This field shall be supplied only when AoC parameters have been sent.
M
The mobile station classmark employed on call set-up.
OC
A list of changes to the classmark during the connection each time-stamped
C C C
Seizure time: time of incoming traffic channel seizure (for unsuccessful call attempts) Answer: time of answer (for successful calls) Release time: time of traffic channel release
M
The chargeable duration of the connection for successful calls, the holding time for call attempts.
OC
The number of data segments transmitted if available at the MSC
OC
The type of radio traffic channel (full / half etc.) requested by the MS.
OC
The type of radio channel actually used (full or half rate).
Change of Rad. Chan.
OC
A list of changes each time stamped
Cause for termination
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Change of Parameters
AOC
MS Classmark Change of Classmark
Event time stamps:
Call duration Data volume Radio Chan. Requested Radio Chan. Used
Diagnostics Call reference Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Ind.
C
Identification of last CDR
Additional Chg. Info
OC
Charge/no charge indicator and additional charging parameters, when available.
Record extensions
OC
A set of network / manufacturer specific extensions to the record, when available.
Is CAMEL Call
OM
The field indicates that the CAMEL service is applied in the call.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
Is HSCSD Used
OM
The field indicates that the HSCSD service is applied in the call.
Number of HSCSD Channels Requested
OC
The maximum number of HSCSD channels requested as received from the MS at call set-up. Shall only be present for HSCSD connections.
ZTE Confidential Proprietary
Page 8 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
Number of HSCSD Channels Allocated
OC
The number of HSCSD channels allocated to the MS at call set-up. Shall only be present for HSCSD connections.
OC
A list of network or user initiated changes of number of HSCSD channels during a connection each timestamped. Shall only be present in case of an HSCSD call, if the basic HSCSD parameters are modified due the user or network initiated modification procedure.
Fixed Network User Rate
OC
Indicates the user data rate applied for the connection in the fixed network. Shall only be present for 2G HSCSD connections and for UMTS data connections.
Air Interface User Rate Requested
OC
The total Air Interface User Rate Requested by the MS at call set-up. Shall only be present for non-transparent HSCSD connections.
Channel Coding Accepted
OC
A list of the traffic channels codings accepted by the MS. Shall only be present for HSCSD connections.
Channel Coding Used
OC
The traffic channels codings negotiated between the MS and the network at call set-up. Shall only be present for HSCSD connections.
Speech Version Supported
OC
Speech version supported by the MS with highest priority indicated by MS
Speech Version Used
OC
Speech version used for that call
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
Default call handling 2
OC
Indicates whether or not a CAMEL call encountered default call handling for 2nd service such as dialled service. This field shall be present only if default call handling has been applied.
GsmSCF address 2
C
Identifies the CAMEL server serving the subscriber for 2nd service such as dialled service. Shall be present only if CAMEL is applied for 2nd service.
Service key 2
C
The CAMEL service logic to be applied for 2nd service such as dialled service. Shall be present only if CAMEL is applied for 2nd service.
C
This field contains data sent by the gsmSCF in the FCI message(s) for 2nd service such as dialled service. The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied for 2nd service.
C
Indicator if free format data for 2nd service from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied for 2nd service.
Change of Parameters
Number encountered
HSCSD
of
DP
Level of CAMEL service
Free format Data
CAMEL information
call
leg
Free format data append indicator
Free format Data 2
Free format data append indicator 2
ZTE Confidential Proprietary
Page 9 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
System Type
M
This field indicates the use of GERAN, UTRAN (or a value of unknown). This field is present when either the UTRAN or GERAN air-interface is used on call set-up. For an open CDR in a 2G NE (responsible for the CDR), the field is not present (even if the call is handed off to a 3G air interface). For a CDR in a 3G NE (responsible for the CDR), the value unknown shall be used after handover.
Exchange Identity
OM
Identity of the MSC that generates original bills.
Dialled Number
C
Number dialed by subscribers. It is used in originating calls only.
Subscriber Category
C
Subscriber property registered by mobile subscribers in the HLR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
EMLPP Priority Level
C
The level of priority actually used by subscribers when invoking the eMLPP service.
EMLPP Request Priority Level
C
The priority level of subscription when subscribers invoke the eMLPP service.
Hot billing tag
C
Hot billing tag defined by operators
Is CUG Used
OM
The field indicates that the CUG service is applied in the call.
CUG Category
C
Reserved for extention
CUG InterLockCode
C
Inter-lock code of CUG, used to identify different CUGs in the same network
Data Rate
C
Rate of the data service
Is MultiMedia Call
OM
This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS
Rate Indication
OC
This indication is present when the “rate match” of basic services between the MS or user equipment and the network is informed.
Oc
Bit rate guaranteed by the UMTS carrier service for users or applications. It is based on available resources. It can make admission easy to control and fit for resource allocation in the UMTS. This parameter is present in the UMTS data connections only.
Maximum bit rate
Oc
The maximum bit rate can be used to establish coding restrictions in the down lines of the wireless interface. It is used to restrict the bit rate from transmission to applications or external network and to define the maximum user bit rate for the applications that can use different bit rates for transmission. This parameter is present for the UMTS data connections only.
Personal back ring tone indicator
OC
Indicate whether the personal back ring tone (PBRT) service is applied in the call.
CS Allocation/Retention Priority
OC
CS allocation/retention priority (CARP) of visiting international roaming subscribers
CUG Index
C
CUG index for the subscriber
CUG Outgoing Access Used
C
CUG outgoing access is used.
CUG Outgoing Access Indicator
C
This parameter indicates that the calling subscriber has made a CUG call with outgoing access.
Sequence
Guaranteed bit rate
ZTE Confidential Proprietary
Page 10 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Hot Billing Tag2
C
DDCFlag
OC
BSC Identification
OC
This field indicates the BSC spc code where the served subscriber is located when the call is started.This field is provided only when 2G radio access technology is used.
Called Location
OC
This field indicates the location of the called subscriber when the call is started
Calling Party Roaming Indicator
OC
This field is the roaming indicator of the calling party.It is provided only when the calling subscriber is roaming
Service Category
OC
This field indicates the service category of the call.
Transaction Identification
OC
This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
Reason for service change
OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used
Type of service change
OC
Indicates the type of service change. Provided if SCUDIF service is used
BSC Identification 24
OC
This field indicates the BSC spc24 code
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
MNPNumber
Oc
Mobile Portable Number obtained from HLR when using MNP service.
BYPASS
Oc
This field is provided when the BYPASS service is used, special for WANA PPS.
WANAPPS
Oc
This field indicates the calling party is WANA Prepaid subscriber.
MNP Routing Number
OC
This field is provided when the called party used MNP service.
Iu Release Cause
OC
When established MO call is released because of Iu connetion failure, this filed shows the RANAP cause for the failure.
A Release Cause
OC
When established MO call is released because of Iu connetion failure, this filed shows the BSSAP cause for the failure.
Called IMSI
OC OC OC
IMSI of the called party
Called IMEI Routing Category
ZTE Confidential Proprietary
Description Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. Direct Collect Call Flag defined by operators.
IMEI of the called ME , if available. This field indicates the routing category of the call
Page 11 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.2
Field
Category
Millisecond Duration
OC
BYPASS Flag 2
OC
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
OutPulsedNumber
OC
This field indicates the out office called number in the out office call service.
Suppress Indicator
Oc
This field indicates the CAMEL service is suppressed by MSC/VLR.
CAMEL
Description This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the AIS SCP BYPASS service defined by operators
Mobile Terminated Call A mobile terminated call (MTC) record the charging information of the called party (mobile subscriber) during a call, and the information serves as the original voucher of charging submitted by the MSC to the billing center for the called party.
5
ZTE Confidential Proprietary
Table 2
MTC Record
Page 12 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Record Type Served IMSI Served IMEI Served MSISDN Calling Number Recording Entity Incoming TKGP
Category M M C OM C M OM
Outgoing TKGP
OC
Location
C
Change of Location
OC
Basic Service
M
Transparency Indicator
C
Change of Service
OC
Supplementary services
C
AOC Parameters
OC
Change of Parameters
AOC
OC
MS Classmark
OM
Change of Classmark
OC
Event time stamps:
C C C
Call duration
M
Data volume
OC
Radio Chan. Requested
OC
Radio Chan. Used Change of Rad. Chan Cause for termination
OC OC M
Diagnostics
OM
Call reference
M
Sequence no.
C
Last Long Part Ind.
C
Additional Chg. Info
OC
Record extensions
OC
Network Call Reference
C
ZTE Confidential Proprietary
Description Mobile Terminated. IMSI of the called party. IMEI of the called ME, if available. The MSISDN of the called party. The number of the calling party if available. The E.164 number of the visited (terminating) MSC The MSC trunk group on which the call originated. The trunk group on which the call left the MSC, usually to the BSS. If available in 3G, this parameter shall be supplied. The identity of the cell or the SAC occupied by the called party when the call was set up, including the location area code. A list of changes in Location Area Code / Service Area Code / Cell Id. Each time-stamped. Bearer or teleservice employed Indicates whether the basic service was used in transparent or non-transparent mode. This parameter is provided only for those basic services which may be employed in both transparent and non-transparent mode. A list of changes of basic service during a connection each time-stamped. Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked. The charge advice parameters sent to the MS on call set-up. This field shall be supplied only when AoC parameters have been sent. New AOC parameters sent to the MS e.g. as a result of a tariff switch-over, including the time at which the new set was applied. This field shall be supplied only when AoC parameters have been sent. The mobile station class mark. A list of changes to the classmark during the connection each time-stamped Seizure time: time of traffic channel seizure for unsuccessful call attempts Answer time: time of answer for successful calls Release time: time of traffic channel release The chargeable duration of the connection if successful, the holding time of the call if unsuccessful. The number of data segments transmitted, if available at the MSC The type of radio traffic channel (full / half etc.) requested by the MS. The type of radio channel used (full or half rate). A list of changes each time stamped The reason for the release of the call. A more detailed reason for the release of the connection. A local identifier distinguishing between transactions at the same MS Partial record sequence number, only present in case of partial records. Identification of last CDR Charge/no charge indicator and additional charging parameters, when available. A set of network/ manufacturer specific extensions to the record, when available. An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
Page 13 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Is CAMEL Call
OM
MSC Address
C
Number of HSCSD Channels Requested
OC
Number of HSCSD Channels Allocated
OC
Change of Parameters
OC
HSCSD
Fixed Network User Rate
C
Air Interface User Rate Requested
C
Channel Coding Accepted
C
Channel Coding Used
C
Speech Version Supported
OC
Speech Version Used
OC
GsmSCF address
C
Service Key
C
Default Call handling
C
Free format Data
C
System Type
M
Exchange Identity
OM
Redirect Number
C
Subscriber Category
C
Record Number
M
Sequence
Connected Number
OC
Hot billing tag
C
Is CUG Used
OM
CUG Category
C
CUG InterLockCode
C
ZTE Confidential Proprietary
Description The field indicates that the CAMEL service is applied in the call. This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied. The maximum number of HSCSD channels requested as received from the MS at call set-up. Shall only be present for HSCSD connections. The number of HSCSD channels allocated to the MS at call set-up. Shall only be present for HSCSD connections. A list of network or user initiated changes of number of HSCSD channels during a connection each timestamped. Shall only be present in case of an HSCSD call, if the basic HSCSD parameters are modified due the user or network initiated modification procedure. Indicates the user data rate applied for the connection in the fixed network. Shall only be present for 2G HSCSD connections and for UMTS data connections. The total Air Interface User Rate Requested by the MS at call set-up. Shall only be present for non-transparent HSCSD connections. A list of the traffic channels codings accepted by the MS. Shall only be present for HSCSD connections. The traffic channels codings negotiated between the MS and the network at call set-up. Shall only be present for HSCSD connections. Speech version supported by the MS with highest priority indicated by MS Speech version used for the call Identification address of the CAMEL server used by subscribers. This parameter is present in the called CDR of the called GMSC only when the CAMEL service is applied. CAMEL service logic to be applied. This parameter is present only when the CAMEL service is applied. Indicate whether the default call handling is applied for a CAMEL call. This field is present only when the default call handling is applied. This parameter contains data of FCI messages sent by the SCF. The data can be sent in an FCI message or multiple FCI messages and indicated by corresponding suffix. This parameter is present in the called CDR only when the CAMEL service is applied and the SCP sends FCI messages. Indicate that a call happens in the 3G-UMTS or GSM system. Identity of the MSC that generates original bills. Mobile redirect number, usually the call forwarding number C
Subscriber attribute registered subscribers in the HLR
by
mobile
Record sequence number. It is the unique ID of a CDR. Number of the connected party (number C) if it is different from the called number. Hot billing tag defined by operators The field indicates that the CUG service is applied in the call. Reserved for extention Inter-lock code of CUG, used to identify different CUGs in the same network
Page 14 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
C
Description Rate of the data service This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS. This indication is present when the “rate match” of basic services between the MS or user equipment and the network is informed. Bit rate guaranteed by the UMTS carrier service for users or applications It is based on available resources. It can make admission easy to control and fit for resource allocation in the UMTS. This parameter is present in the UMTS data connections only. The maximum bit rate can be used to establish coding restrictions in the down lines of the wireless interface. It is used to restrict the bit rate for transmission to applications or external networks and to define the maximum user bit rate for the applications that can use different bit rates for transmission. This parameter is present for the UMTS data connection only. Indicate whether the PBRT service is applied in the call. CS allocation/retention priority (CARP) of visiting international roaming subscribers CUG index for the subscriber
C
CUG incoming access is used.
Data Rate
C
Is MultiMedia Call
OM
Rate Adaptation
OC
Guaranteed bit rate
Oc
Maximum bit rate
Oc
Personal back ring tone indicator CS Allocation/Retention Priority CUG Index CUG Incoming Access Used CUG Incoming Access Indicator
OM OC
Redirecting Number
C
Hot Billing Tag 2
C
DDCFlag
OC
This parameter indicates that the calling subscriber has made a CUG call with outgoing access. Mobile redirect number, usually number B before forwarding Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. Direct Collect Call Flag defined by operators.
Terminating Record Type Original Called Number
OC
This field indicates the type of the terminating record.
OC
The original called number.It is the B number in the terminating record of C
BSC Identification
OC
This field indicates the BSC spc code where the served subscriber is located when the call is started. This field is provided only when 2G radio access technology is used.
Calling Location
OC
This field indicates the location of the calling subscriber when the call is started
OC
This field is the roaming indicator of the called party.It is provided only when the called subscriber is roaming
Service Category
OC
This field indicates the service category of the call.
Transaction Identification
OC
This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Called Party Indicator
ZTE Confidential Proprietary
Roaming
C
Page 15 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.3
Field Partial Record Type
Category OC
Description Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
Reason for service change
OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used
Type of service change
OC
Indicates the type of service change. Provided if SCUDIF service is used
BSC Identification 24
OC
This field indicates the BSC spc24 code
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
EMLPP Priority Level
C
The level of priority actually used by subscribers when invoking the eMLPP service.
EMLPP Request Priority Level
C
The priority level of subscription when subscribers invoke the eMLPP service.
Iu Release Cause
OC
When established MT call is released because of Iu connetion failure, this filed shows the RANAP cause for the failure.
A Release Cause
OC
When established MT call is released because of Iu connetion failure, this filed shows the BSSAP cause for the failure.
Routing Category
OC
Millisecond Duration
OC
Operator ID
OC
This field indicates the routing category of the call This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the operator id, provided in MultiOperator Core Network
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Outgoing Traffic Type
OC
This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
StartT ime
OC
If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
Roaming Call A roaming (Inter-PLMN) record is generated by the routing GMSC of HPLMN when the called subscriber is roaming outside the PLMN. It is used to record the location information of the roaming called subscriber.
5
If it is configured to output intra-PLMN roaming record, a roaming (Intra-PLMN) record is generated in the routing GMSC when the called subscriber is roaming inside the PLMN. It is used to record the location information of the roaming called subscriber. Table 3
ZTE Confidential Proprietary
Roaming record
Page 16 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Record Type Served IMSI Served MSISDN Calling Number
Category M M OM C
Roaming Number
OM
Recording Entity Incoming TKGP Outgoing TKGP Basic service
M OM OM M
Transparency Indicator
C
Change Of Service
OC
Supplementary Services
OC
Event time stamps
C C OM
Call duration
M
Data volume
C
Cause for termination
M
Diagnostics
OM
Call reference
M
Sequence no.
C
Last Long Part Ind.
C
Record extensions
OC
Is CAMEL Call
OM
Network Call Reference
C
MSC Address
C
Exchange Identity Record Sequence Number
OM
Is CUG Used
OM
CUG Category
C
CUG InterLockCode
C
Data Rate
C
Is MultiMedia Call
OM
Hot Billing Tag 2
C
Redirect Number
OC
ZTE Confidential Proprietary
M
Description Roaming record. IMSI of the called (roaming) party. The MSISDN of the called (roaming) party. The address of the calling party, if available. The Mobile Station Roaming Number employed to route this connection. The E.164 number of the GMSC The GMSC trunk group on which the call originated. The trunk group on which the call left the GMSC Bearer or teleservice employed. Indicates whether the basic service was used in transparent or non-transparent mode. This parameter is provided only for those basic services which may be employed in both transparent and non-transparent mode. A list of changes of basic service during a connection each time-stamped. Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked. Seizure time: time of incoming traffic channel seizure (for unsuccessful call attempts) Answer time: time of answer (for successful calls) Release time: time of traffic channel release The chargeable duration of the connection for successful calls, the holding time of call attempts. The number of data segments transmitted if available at the GMSC The reason for the release of the connection. A more detailed reason for the release of the connection. A local identifier distinguishing between transactions on the same MS Partial record sequence number, only present in case of partial records. Identification of last CDR A set of network/ manufacturer specific extensions to the record, when available The field indicates that the CAMEL service is applied in the CDR. An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied. This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. The field indicates that the CUG service is applied in the call. Reserved for extention Inter-lock code of CUG, used to identify different CUGs in the same network Rate of the data service This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. The redirecting number of the call.
Page 17 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.4
Field BSC Identification
Category OC
Description This field indicates the BSC spc code where the served subscriber is located when the call is started. This field is provided only when 2G radio access technology is used.
Service Category
OC
This field indicates the service category of the call.
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Trans Roaming Number
Oc
This field indicates the changed Mobile Station Roaming Number
BSC Identification 24
Oc
This field indicates the BSC spc24 code
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
Routing Category
OC
Millisecond Duration
OC
Operator ID
OC
This field indicates the routing category of the call This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the operator id, provided in MultiOperator Core Network
Interrogation time stamp
M
Time when the interrogation is invoked.
CAMEL Number
M
Routing number after interrogation by the CAMEL server
GsmSCF Address
M
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
M
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
MSC Address
M
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Outgoing Traffic Type
OC
This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
StartT ime
OC
If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
Destination
Gateway Record
5
A gateway record charging information related to the trunk. It is used to settle accounts with other networks. According to the direction of a call, the gateway CDR falls into incoming gateway CDR and outgoing gateway CDR.
ZTE Confidential Proprietary
Page 18 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The generation of gateway CDRs can be configured through the configuration management system of the switch. Table 4
Incoming Gateway Record
Field Record Type
M
Calling Number
C
Called Number
M
Recording Entity
M
Incoming TKGP
OM
Outgoing TKGP
OC
Event time stamps
M C OM
Call duration
M
Data Volume Cause for termination
C M
Diagnostics
OM
Call Reference Sequence no. Last Long Part Ind.
M C C
Record extensions
OC
Exchange Identity Additional Chg. Info Record Sequence Number Personal back ring tone indicator DDCFlag
OM OC
Gateway Record Type
OC
This field indicates e.g.gateway,trunk
Roaming Number
OC
This field is the roaming number of the called subscriber
Redirect Number
OC
The redirect number of the call
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24 Incoming Cic
OC
This field is the spc24 code of the serving MSC
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Forward Call Indicator
OC
This field is only provided in the incoming gateway record,it is used to identify the type of the originating party of the call. e.g. international or national
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
ZTE Confidential Proprietary
Category
M OC OC
Description Incoming gateway record The number of the calling party if available at this node. The address of the called party as seen by the GMSC. This is the number employed by the GMSC for routing. The E.164 number of the GMSC The incoming GMSC trunk group on which the call originated. The trunk group on which the call left the GMSC. If available in 3G, this parameter shall be supplied. Seizure time: time of incoming trunk seizure Answer time: time of answer (successful calls only) Release time: time of incoming trunk release The accountable duration (answer -> release of incoming trunk) of the connection if successful, the call holding time of the incoming trunk for call attempts. If applicable and known at the GMSC The reason for the release of the connection. A more detailed reason for the release of the connection. A local identifier distinguishing between transactions. Partial record sequence number, if applicable. Identification of last CDR A set of network/ manufacturer specific extensions to the record, when available. Identity of the MSC that generates original bills. Charge/No charge and additional charge indicator Record sequence number. It is the unique ID of a CDR. Indicate whether the PBRT service is applied in the call. Direct Collect Call Flag defined by operators.
Page 19 of 204
the
type
of
the
trunk.
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Reason for service change
OC
Type of service change
OC
ISDN Basic Service
OM
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
MNPNumber
Oc
Mobile Portable Number obtained from HLR when using MNP service.
Is MultiMedia Call
OM
MNP Routing Number
OC
This field is provided when the called party used MNP service.
Trunk Line
OC
Millisecond Duration
OC
Operator ID
OC
This field indicates the trunk line type. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the operator id, provided in MultiOperator Core Network
Is CAMEL Call
OM
The field indicates that the CAMEL service is applied in the call.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Free format Data
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
Number encountered
of
CAMEL call information
DP
leg
Category
C
Description Indicates the type of service change and fallback. Provided if SCUDIF service is used Indicates the type of service change. Provided if SCUDIF service is used The ISDN basic service employed
This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
OutPulsedNumber
OC
This field indicates the out office called number in the out office call service.
InitialCalledNumber
OC
This field indicates the original called number in the trunk line
ZTE Confidential Proprietary
Page 20 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Connected Number
Category OC
Description This field indicates the connected number This field indicates the call forwarding number C
LocalOfficeForward
OC OC
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Outgoing Traffic Type
OC
This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
StartT ime
OC
If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
ForwardedToNumber
Table 5
This field indicates the call is forwarded by local office or not.
Outgoing Gateway Record
Field
Category
Description
Record Type
M
Outgoing gateway record
Calling Number
C
The number of the calling party if available at this node.
Called Number
M
The address of the called party as seen by the GMSC. This is the number employed by the GMSC for routing.
Recording Entity
M
The E.164 number of the GMSC
Incoming TKGP
OC
The incoming GMSC trunk group on which the call originated. If available in 3G, this parameter shall be supplied.
Outgoing TKGP
OM
The trunk group on which the call left the GMSC.
Event time stamps:
M C OM
Seizure time: time of outgoing trunk seizure Answer time: time of answer (successful calls only) Release time: time of outgoing trunk release
Call duration
M
The accountable duration (answer -> release of outgoing trunk) of the connection if successful, the call holding time of the outgoing trunk for call attempts.
Data Volume
C
If applicable and known at the GMSC
Cause for termination
M
The reason for the release of the connection.
Diagnostics
OM
A more detailed reason for the release of the connection.
Call Reference
M
A local identifier distinguishing between transactions.
Sequence no.
C
Partial record sequence number, if applicable.
Last Long Part Ind.
C
Identification of last CDR
Record extensions
OC
A set of network/ manufacturer specific extensions to the record, when available
Exchange Identity
OM
Identity of the MSC that generates original bills.
Additional Chg. Info
OC
Charge/No charge and additional charge indicator
Record Number
M
Record sequence number. It is the unique ID of a CDR.
OM
Indicate whether the PBRT service is applied in the call.
Sequence
Personal back tone indicator
ZTE Confidential Proprietary
ring
Page 21 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field DDCFlag
Category OC
Description
Gateway Record Type
OC
This field indicates e.g.gateway,trunk
Roaming Number
OC
This field is the roaming number of the called subscriber
Redirect Number
OC
The redirect number of the call
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name Outgoing TKGP Name Partial Record Type
OC
This field indicates the incoming trunk group name.
OC
This field indicates the outgoing trunk group name.
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
Reason for service change
OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used
Type of service change
OC
ISDN Basic Service Global Call Reference
OM OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used The ISDN basic service employed The Global Call Reference idenfifies a call uniquely within a network and across network.
MNPNumber
Oc
Is MultiMedia Call
OM
Trunk Line
Oc
Millisecond Duration
OC
rnPlusB
Oc
Operator ID
OC
InitialCalledNumber
OC
This field indicates the original called number in the trunk line
Connected Number
OC
This field indicates the connected number
ForwardedToNumber
OC
This field indicates the call forwarding number C
LocalOfficeForward
OC
This field indicates the call is forwarded by local office or not.
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Outgoing Traffic Type
OC
This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
StartT ime
OC
If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
ZTE Confidential Proprietary
Direct Collect Call Flag defined by operators. the
type
of
the
trunk.
Mobile Portable Number obtained from HLR when using MNP service. This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS This field indicates the trunk line type. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates that the called number is route number or ordinaery number. This field indicates the operator id, provided in MultiOperator Core Network
Page 22 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.5
TRANSIT
5
A transit record is generated when the MSC serves as the TMSC. That is, the MSC is not an MSC that a calling party visits or an MSC that a terminating party visits. It implements the function of call connection. In this case, the MSC generates the transit bill. The transit CDR cannot be generated at the same time when the trunk CDR is generated. The transit CDR or trunk CDR can be generated through setting of configuration management system. Table 6 Field Record Type
M
Calling Number
C
Called Number ISDN Basic Service Recording Entity Incoming TKGP Outgoing TKGP
M OM M OM OM
Event time stamps:
C C OM
Call duration
M
Data Volume Cause for termination
OC M
Diagnostics
OM
Call Reference Sequence no. Last Long Part Ind.
M C C
Record extensions
OC
Exchange Identity Additional Chg. Info Record Sequence Number Personal back ring tone indicator DDCFlag Roaming Number
OM OC
Redirect Number
OC
The redirect number of the call
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
MNPNumber
Oc
Mobile Portable Number obtained from HLR when using MNP service.
Is MultiMedia Call
OM
ZTE Confidential Proprietary
Category
Transit Record
M OC OC OC
Description Transit The number of the calling party if available at this node. The address of the called party as seen by the TMSC. The ISDN basic service employed The E.164 number of the transit MSC The TMSC trunk group on which the call originated. The trunk group on which the call left the TMSC. Seizure time: time of incoming trunk seizure for unsuccessful call attempts Answer time: time of answer (successful calls only) Release time: time of traffic channel release The chargeable duration of the connection if successful, the call holding time for call attempts. If applicable and known at the transit MSC The reason for the release of the connection. A more detailed reason for the release of the connection. A local identifier distinguishing between transactions. Partial record sequence number, if applicable. Identification of last CDR A set of network/ manufacturer specific extensions to the record, when available. Identity of the MSC that generates original bills. Charge/No charge and additional charge indicator Record sequence number. It is the unique ID of a CDR. Indicate whether the PBRT service is applied in the call. Direct Collect Call Flag defined by operators. This field is the roaming number of the called subscriber
This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS
Page 23 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Partial Record Type
Category OC
Description Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Reason for service change
OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
Type of service change
OC
Indicates the type of service change. Provided if SCUDIF service is used
Trunk Line
OC
Millisecond Duration
OC
Operator ID
OC
This field indicates the trunk line type. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the operator id, provided in MultiOperator Core Network
Is CAMEL Call
OM
The field indicates that the CAMEL service is applied in the call.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Free format Data
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
Number encountered
of
CAMEL call information
DP
leg
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
OutPulsedNumber
OC
This field indicates the out office called number in the out office call service.
InitialCalledNumber
OC
This field indicates the original called number in the trunk line
Connected Number
OC
This field indicates the connected number
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
ZTE Confidential Proprietary
Page 24 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.6
Field Outgoing Traffic Type
OC
Category
StartT ime
OC
Description This field indicates the call is outgoing to local network mobile section or local network fixed section or external network. If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
SMS-MO An SMS-MO record is generated by the VMSC for each short message sent by a mobile subscriber. Table 7
5 Field Record Type Served IMSI Served IMEI
M M OC
Served MSISDN
OM
MS Classmark
M
Service Centre Address
M
Recording Entity
M
Location
OM
Message Reference
OM
Event Time stamp
M
SMS Result
C
Record extensions
OC
Destination number
OM
CAMEL Information
Category
SMS
C
System Type
M
Exchange Identity Record Sequence Number Hot billing tag
OM
Hot Billing Tag 2
C
Transaction Identification
OC
ZTE Confidential Proprietary
M C
SMS-MO Record Description SMS-Mobile originated IMSI of the subscriber sending the short message IMEI of the subscriber sending the short message Primary MSISDN of the subscriber sending the short message Mobile station classmark Address of the short message service center (E.164 number) E.164 number of the visited MSC (serial number of MSC/VLR: TON + NPI + MSC ID) Location area code (LAC) and service area code (SAC) or cell ID (CID) from which the message is sent. The Cell Identity contains the 16 least significant bits and the Tracking Area Code is placed in the Location Area Code filed if EUTRAN is used to deliver the SMS. A reference, provided by the MS uniquely identifying this message Time stamp when the MSC receives the short message from a subscriber Result of the attempted delivery if the delivery is unsuccessful. A series of CDR extension information defined by the network or manufacturer Destination number dialed by the MS sending the message A series of CAMEL information IEs. Each of these contains information related to CAMEL call leg of the short message. Indicate that a call happens in the 3G-UMTS or GSM system. The field shall be set to "unknown" for SMS delivery using E-UTRAN. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. Hot billing tag defined by operators Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
Page 25 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Msc SPC14
Category OC
Description This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Direct SMS Flag
OC
Indicate that the short message is routed via the SMSC or direct delivery without the SMSC.
Num SMS
OC
This field indicates the maximum number of short messages in the concatenated short message.
of
Concatenated
Concatenated Number
Record
OC
This field indicates the sequence number of a particular short message within the concatenated short message.
Concatenated Reference
SMS
OC
This field indicates the concatenated short message reference number.
OC
This field indicates the short message length
OC
This field indicates the TP Message Type Indicator
OC
A local identifier of the subscriber sending the short message
Location Extension
OM
The 12 most significant bits of the E-UTRAN Cell Identity are included if E-UTRAN is used to deliver the SMS.
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
Basic service
OC
Bearer or teleservice employed.
SMS Length TP Message Indicator Call Reference
2.1.7
Type
SMS-MT An SMS-MT record is generated by the VMSC for each short message received by a mobile subscriber.
5
ZTE Confidential Proprietary
Table 8
SMS-MT Record
Page 26 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Record Type
M
Service Centre Address
M
Served IMSI Served IMEI
M OC
Served MSISDN
OM
MS Classmark
C
Recording Entity
M
Location
OM
Event Time stamp
M
SMS Result
C
Record extensions
OC
System Type
M
Exchange Identity Record Sequence Number Origination number Hot billing tag
OM
Hot Billing Tag 2
C
Transaction Identification
OC
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
CAMEL Information
Category
SMS
M OC C
C
Description SMS-Mobile terminated Address of the short message service center (E.164 number) IMSI of the subscriber receiving the short message IMEI of the subscriber receiving the short message Primary MSISDN of the subscriber receiving the short message Mobile station classmark E.164 number of the visited MSC (serial number of MSC/VLR: TON + NPI + MSC ID) Location area code (LAC) and service area code (SAC) or cell ID (CID) to which the message is delivered. The Cell Identity contains the 16 least significant bits and the Tracking Area Code is placed in the Location Area Code filed if EUTRAN is used to deliver the SMS. Time stamp when the MSC sends a short message to the subscriber Result of the attempted delivery if the delivery is unsuccessful. A series of CDR extension information defined by the network or manufacturer Indicate that a call happens in the 3G-UMTS or GSM system. The field shall be set to "unknown" for SMS delivery using E-UTRAN. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. Number of the subscriber sending this short message Hot billing tag defined by operators Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
A series of CAMEL information IEs. Each of these contains information related to CAMEL call leg of the short message. Indicate that the short message is routed via the SMSC or direct delivery without the SMSC.
Direct SMS Flag
OC
Num SMS
OC
This field indicates the maximum number of short messages in the concatenated short message.
of
Concatenated
Concatenated Number
Record
OC
This field indicates the sequence number of a particular short message within the concatenated short message.
Concatenated Reference
SMS
OC
This field indicates the concatenated short message reference number.
OC
This field indicates the short message length
OC
This field indicates the TP Message Type Indicator
OC
A local identifier of the subscriber sending the short message
SMS Length TP Message Indicator Call Reference
ZTE Confidential Proprietary
Type
Page 27 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.8
Field Location Extension
Category OM
Description The 12 most significant bits of the E-UTRAN Cell Identity are included if E-UTRAN is used to deliver the SMS.
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
Basic service
OC
Bearer or teleservice employed.
Supplementary Service Call An SS-Action record is generated by the VMSC if a supplementary service is invoked for a mobile subscriber.
5
Table 9
SS-Action Record
Field Record Type Served IMSI Served IMEI Served MSISDN MS Classmark
Category M M OC OM M
Recording Entity
M
Location
OM
Basic Services
C
Supplementary Service
C
SS Action
C
SS Action time stamp SS Parameters SS Action Result
M C C
Call Reference
M
Record extensions
OC
System Type
M
Exchange Identity Record Sequence Number Forwarded Sub. Number
OM
No Reply CondTime
C
Hot Billing Tag2
C
Transaction Identification
OC
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
ZTE Confidential Proprietary
M C
Description Supplementary service action IMSI of the MS performing the action IMEI of the MS performing the action Primary MSISDN of the party performing the action Mobile station classmark E.164 serial number of the MSC/VLR that generates the CDR (serial number of MSC/HLR: TON + NPI + MSC ID) LAC and SAC or CID of the called subscriber when the call is established. Basic service types related to supplementary services. This field is not provided if the action is applicable to all basic services. Supplementary service or group to which supplementary services apply. This parameter is unavailable in the case of USSD. Supplementary service actions such as activation, deactivation, interrogation etc. It is unavailable in the case of USSD. Time at which the action is requested Parameters and data related to supplementary services Result of the requested transaction if unsuccessful Unique identifier of a call or conversation for a party (A or B) in a call. It is also used to identify some output CDRs that belong to the same connection. A series of CDR extension information defined by the network or manufacturer Indicate that a call happens in the 3G-UMTS or GSM system. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. Forwarded sub-number Time for no response before forwarding when a mobile subscriber requests the forwarding service. Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
Page 28 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.9
Field Global Call Reference
Category OC
Description The Global Call Reference idenfifies a call uniquely within a network and across network.
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
Mobile Originated Emergency Call
5
A mobile originated emergency call (MOE) record is a type of record defined by ZTE. It is generated when a mobile subscriber dials the emergency special service number “112”. Note: The CDR generated when an MS dials the number “119” or “110” is a common CDR instead of an MOE CDR. Table 10 MOC Emergency Record Field Record Type
M
Served IMSI
C
Served IMEI
C
Served MSISDN
OC
Translated Number
OC
Recording Entity
M
Incoming TKGP
OC
Outgoing TKGP
OC
Location
OM
Change of Location
OC
Basic service
M
AOC Parameters
OC
Change of Parameters
Category
AOC
OC
MS Classmark
OM
Change of classmark
OC
Event time stamps:
C C OM
Call duration
M
Radio Chan. Requested
C
Radio Chan. Used
C
Change of Rad. Chan.
C
Cause for termination Diagnostics
M OM
ZTE Confidential Proprietary
Description Emergent call record IMSI of the calling party in the case of an emergency call with a SIM card. IMEI of the calling ME Primary MSISDN of the calling party in the case of an emergency call with a SIM card. Called number after digit translation within the MSC (if applicable) E.164 serial number of the MSC that generates an emergency call CDR (serial number of MSC/VLR: TON + NPI + MSC ID) Incoming trunk group through which the call is originated in the MSC, usually trunk between the MSC and the BSS. Outgoing trunk group through which a call is released at the originating MSC. Location area code (LAC) and service area code (SAC) or cell ID (CID) of a subscriber when the subscriber originates a call. A list of changed in LAC. Each change in timestamped. Indicate the teleservice “emergency call” is applied in this call. AOC parameters sent to the MS during setup of a call. New AOC parameters sent to the MS (for example, when the charge rate is changed), including the time when the new parameters are used. Mobile station classmark employed on call setup A list of changes to the classmark during the connection. Each change is time-stamped. Channel seizure time: time seized by channels during calls Answer time: time of answer for the called party in a successfully connected call Release time: time of traffic channel released by the calling or called party Call duration for charging Radio channel type requested by MS (full rate/half rate) Radio channel type actually used by MS (full rate/half rate) A list of changes of radio traffic channel in a connection. Each change is time-stamped. Cause for release of the connection Detailed reason for release of the connection
Page 29 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Sequence no.
C
Last Long Part Ind.
C
Call reference
M
Record extensions
OC
System Type
M
Exchange Identity
OM
Subscriber Category
C
Called Number
OC
Record Number
Sequence
M
Roaming Number
OC
EMLPP Priority Level
C
EMLPP Request Priority Level Hot billing tag CS Allocation/Retention Priority
C C OM
Description Sequence No. of part of output CDRs. This parameter is present only when some CDRs are output. Identification of last CDR Unique identifier of a call or conversation for a party (A or B) in a call. It is also used to identify some output CDRs that belong to the same connection. A series of CDR extension information defined by the network or manufacturer Indicate that a call happens in the 3G-UMTS or GSM system. Identity of the MSC that generates original bills. Subscriber attribute registered by mobile subscribers in the HLR Destination number of the called party (often dialed by the calling party) Record sequence number. It is the unique ID of a CDR. Mobile station routing number employed to route this connection The level of priority used by subscribers when invoking the eMLPP service The priority level of subscription when subscribers invoke the eMLPP service. Hot billing tag defined by operators CS allocation/retention priority (CARP) of visiting international roaming subscribers Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field indicates the BSC spc code where the served subscriber is located when the call is started. This field is provided only when 2G radio access technology is used.
Hot Billing Tag 2
C
BSC Identification
OC
Transaction Identification
OC
This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
BSC Identification 24
OC
This field indicates the BSC spc24 code
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
Iu Release Cause
OC
When established MO call is released because of Iu connetion failure, this filed shows the RANAP cause for the failure.
A Release Cause
OC
When established MO call is released because of Iu connetion failure, this filed shows the BSSAP cause for the failure.
Is CAMEL Call DPNumber
ZTE Confidential Proprietary
OM
OC
The field indicates that the CAMEL service is applied in the call. Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Page 30 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field gsmSCF address
OC
MSC Address
OC
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Service key
OC
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
Network Call Reference
C
Routing Category
OC
Millisecond Duration
OC
Operator ID
OC
Suppress Indicator
2.1.10
Category
CAMEL
Oc
Description Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied. This field indicates the routing category of the call This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the operator id, provided in MultiOperator Core Network This field indicates the CAMEL service is suppressed by MSC/VLR.
Mobile Originated Call Forwarding
5
A mobile originated call forwarding call (MCF) record is a type of record defined by ZTE. It is generated for subscriber B at the MSC when subscriber A originates a call to subscriber B and the call is forwarded to subscriber C. Table 11 Mobile Originated Call Forwarding Record Field Record Type
Category M
Forward Type
M
Served IMSI Served IMEI
M OM
Served MSISDN
OM
Calling Number Called Number
OM OM
Translated Number
OC
Connected Number
OC
Roaming Number
OC
Recording Entity
M
Incoming TKGP
OM
Outgoing TKGP
OM
Basic service
C
ZTE Confidential Proprietary
Description Mobile originated forwarding record Type of forwarding, i.e forward on busy,forward on unconditional. IMSI of the subscriber originating call forwarding IMEI of the forwarding ME MSISDN of the subscriber originating call forwarding (original called number) Address of the calling party Address of the forwarded-to party Called number after digit translation within the MSC (if applicable) The number of the connected party if it is different from the original called number dialed by the calling party. Mobile station roaming number employed to route this connection (dynamic roaming number of subscriber C) E.164 serial number of the MSC that generates the CDR for the calling party (serial number of MSC/VLR: TON + NPI + MSC ID) Incoming trunk group through which the call is originated at the forwarding MSC Outgoing trunk group through which a call is released at the forwarding MSC. Bearer or teleservice employed. This parameter may not be available, for example, in the case of call forwarding unconditional (CFU).
Page 31 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Transparency Indicator
C
Change Of Service
OC
Supplementary Services
C
Event time stamps:
C C OM
Call duration Cause for termination Diagnostics
M M OM
Data volume
C
Sequence no.
C
Last Long Part Ind.
C
Call reference
M
Additional Chg. Info
OC
Record extensions
OC
Is CAMEL Call
OM
gsmSCF address
C
Service key
C
Network Call Reference
C
MSC Address
C
CAMEL indicator
initiated
CF
Default call handling Number of encountered
C OC
DP
OC
Level of CAMEL service
OC
Free format Data
C
CAMEL call information
leg
Free format data append indicator
ZTE Confidential Proprietary
C C
Description This parameter is present only when a teleservice is used in the transparent mode and non-transparent mode. A list of changes of basic service during a call connection. Each change is time-stamped. Supplementary service invoked as a result of this connection. Channel seizure time: time seized by channels during calls Answer time: time of answer for the called party in a successfully connected call Release time: time of traffic channel released by the calling or called party Call duration for charging Cause for release of the connection Detailed reason for release of the connection Data volume sent through the MSC when the data service borne by the circuit switched (CS) domain is applied. Sequence No. of part of output CDRs. This parameter is present only when some CDRs are output. Identification of last CDR Unique identifier of a call or conversation for a party (A or B) in a call. It is also used to identify some output CDRs that belong to the same connection. Charge/No charge and additional charge indicator A series of CDR extension information defined by the network or manufacturer The field indicates that the CAMEL service is applied in the CDR. Identification address of the CAMEL server used by subscribers. This parameter is present only when the CAMEL service is used by subscribers. CAMEL service logic to be applied. This parameter is present only when the CAMEL service is applied. NCR used to correlate CDRs generated by network elements to which a call passes when the CAMEL service is applied. E.164 code of the MSC in which the NCR is generated. This parameter is present only when the CAMEL service is applied. Indicate that the CAMEL server initiates the call forwarding. This parameter is present only when the CAMEL service is applied. Indicate whether the default call handling is used in a CAMEL call when the default call handling of CAMEL is available. Number of detection points (DP) encountered CAMEL service level to be applied. This parameter is present only when the CAMEL service is applied. This parameter contains data of FCI messages sent by the SCF. The data can be sent in an FCI message or multiple FCI messages and indicated by corresponding suffix. This parameter is present only when the CAMEL service is applied and the SCP sends FCI messages. A series of CAMEL information IEs. Each IE contains corresponding CAMEL call leg information. This parameter is present only when the CAMEL service is applied. Free format data of a CDR. It is appended to the free format data of the previous partial output CDR.
Page 32 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
C
Description This parameter indicates whether a call invokes the default call handling of the second type of CAMEL service if the second type of CAMEL service is available, for example, the dialed service. This parameter indicates that a call invokes the SCF address of the second type of CAMEL service if the second type of CAMEL service is applied, for example, the dialed service. This parameter indicates the second service logic invoked by a call if the second type of CAMEL service is available, for example, the dialed service. This parameter contains data of FCI messages sent by the SCF for the second type of CAMEL service when the second type of CAMEL service is applied, for example, the dialed service. The data can be sent in an FCI message or multiple FCI messages and indicated by corresponding suffix. This parameter indicates that the free format data in the CDR is appended to the previous partial output CDR when the second type of CAMEL service is applied, for example, the dialed service. Subscriber attribute registered by mobile subscribers in the HLR Indicate that a call happens in the 3G-UMTS or GSM system.This field is not present in call forwarding call. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. Number of times when a call is forwarded. Hot billing tag defined by operators The field indicates that the CUG service is applied in the call. Reserved for extention Inter-lock code of CUG, used to identify different CUGs in the same network Rate of the data service This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS. This indication is present when the “rate match” of basic services between the MS or user equipment and the network is informed. Rate at which the data generated for the HSCSD traffic is transmitted through the interface of PSTN/ISDN Indicate whether the PBRT service is applied in the call. CS allocation/retention priority (CARP) of visiting international roaming subscribers CUG index for the subscriber
C
CUG outgoing access is used.
Default call handling 2
OC
GsmSCF address 2
C
Service key 2
C
Free format Data 2
C
Free format data append indicator 2
C
Subscriber Category
C
System Type
C
Exchange Identity Record Sequence Number Number Of Forwarding Hot billing tag
OM
Is CUG Used
OM
CUG Category
C
CUG InterLockCode
C
Data Rate
C
Is MultiMedia Call
OM
Rate Indication
OC
Fixed Network User Rate
OC
Personal back ring tone indicator CS Allocation/Retention Priority CUG Index CUG Outgoing Access Used CUG Outgoing Access Indicator
M C C
OC OC
C
Hot Billing Tag 2
C
BSC Identification
OC
Called Location
OC
ZTE Confidential Proprietary
This parameter indicates that the calling subscriber has made a CUG call with outgoing access. Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field indicates the BSC spc code where the served subscriber is located when the call is started. This field is provided only when 2G radio access technology is used. This field indicates the location of the called subscriber when the call is started
Page 33 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Calling Party Roaming Indicator
Category OC
Description This field indicates the roaming indicator of the calling party.It is provided only when the calling subscriber is roaming
Service Category
OC
This field indicates the service category of the call.
Msc SPC14
OC
This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Service change initiator
OC
Indicates the service change initiator. Provided if SCUDIF service is used
Reason for service change
OC
Indicates the type of service change and fallback. Provided if SCUDIF service is used
Type of service change
OC
Indicates the type of service change. Provided if SCUDIF service is used
BSC Identification 24
OC
This field indicates the BSC spc24 code
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
MNPNumber
Oc
MNP Number obtained from HLR when using MNP service.
BYPASS
Oc
This field is provided when the BYPASS service is used, special for WANA PPS.
WANAPPS
Oc
This field indicates the call forwarding party is WANA Prepaid subscriber.
MNP Routing Number
OC
This field is provided when the forwarded-to party used MNP service.
Fordwarded To IMSI
IMSI of the forwarded to party
Millisecond Duration
OC OC OC
Location
OC
BYPASS Flag 2
OC
This field indicates the AIS SCP BYPASS service defined by operators
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
OutPulsedNumber
OC
This field indicates the out office called number in the out office call service.
Original Called Number
OC
The original called number. In multi-call forwarding circumstance, it is the B number in the call forwarding call record of C
LocalOfficeForward
OC
This field indicates the call is forwarded by local office or not.
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Routing Category
ZTE Confidential Proprietary
This field indicates the routing category of the call This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. The identity of the cell or the SAC at the time of CDR creation, including the location area code.
Page 34 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Outgoing Traffic Type
OC
StartT ime
OC
If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
Oc
This field indicates the CAMEL service is suppressed by MSC/VLR.
Suppress Indicator
2.1.11
CAMEL
Category
Description This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
Common Equipment Usage Call
5
A common equipment usage (CEU) record is generated to record the use of conference circuits and conference connection duration when the multi-party service is applied in a call. Table 12 Common Equipment Usage Record Field Record Type
M
Category
Equipment type
M
Equipment Id. Served IMSI Served MSISDN
C M OM
Recording Entity
M
Basic service
C
Change Of Service
OC
Supp. Services
C
Description Common equipment usage record Type of common equipment, for example, conference circuit Local ID of the equipment employed IMSI of the party that seizes the equipment Primary MSISDN of the served party E.164 number of the MSC in which the equipment is located Bearer services or telecom services employed A list of changes of basic service during a call connection. Each change is time-stamped. Supplementary service invoked as a result of this connection. Seizure time: start time when the equipment is used Release time: time when the equipment is released Total duration of usage of the equipment Unique identifier of a call or conversation for a party (A or B) in a call. It is also used to identify some output CDRs that belong to the same connection. Sequence No. of part of output CDRs. This parameter is present only when some CDRs are output. Identification of last CDR A series of CDR extension information defined by the network or manufacturer
Call Duration
M OM M
Call Reference
M
Sequence no.
C
Last Long Part Ind.
C
Record extensions
OC
Exchange Identity
OM
Identity of the MSC that generates original bills.
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Event time stamps:
Sequence
System Type
M
Rate Indication
OC
Fixed Network User Rate
OC
Hot Billing Tag2
C
Millisecond Duration
OC
ZTE Confidential Proprietary
Indicate that a call happens in the 3G-UMTS or GSM system. This indication is present when the “rate match” of basic services between the MS or user equipment and the network is informed. Rate at which the data generated for the HSCSD traffic is transmitted through the interface of PSTN/ISDN Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time.
Page 35 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field Operator ID
2.1.12
Category OC
Description This field indicates the operator id, provided in MultiOperator Core Network
Terminating CAMEL Interrogation Call A terminating CAMEL interrogation (TCI) record is generated at the GMSC to record the position information of the terminating subscriber. Table 13 Terminating CAMEL Record
5 Field Record Type Served IMSI Served MSISDN Recording Entity Interrogation time stamp CAMEL Destination Number GsmSCF Address Service key
Category M M OM M M
Network Call Reference
M
MSC Address
OM
Default call handling
OC
Record extensions
OC
Called Number
M
Calling Number
C
Incoming TKGP
OC
Outgoing TKGP
OC
Event time stamps:
C C OM
Call duration
M
Data volume
OC
Cause for termination Diagnostics
M OM
Call reference
M
Sequence no.
C
Last Long Part Ind. Number of DP encountered Level of CAMEL service
C
Description Terminating CAMEL interrogation IMSI of the called party MSISDN of the called party E.164 number of the GMSC Time when the interrogation is invoked. Routing number after interrogation by the CAMEL server Address of the CAMEL server serving subscribers CAMEL service logic to be applied An identifier used to correlate transactions on the same call taking place in different network nodes E.164 number assigned to the MSC that generates the NCR. Indicate whether the default call handling is used in a CAMEL call when the default call handling of CAMEL is available. A series of CDR extension information defined by the network or manufacturer Address of the called party received by the GMSC/gsmSSF Address of the calling party, if available Incoming trunk group through which the call is originated at the forwarding MSC Outgoing trunk group through which a call is released at the forwarding MSC. Channel seizure time: time seized by channels during calls Answer time: time of answer for the called party in a successfully connected call Release time: time of traffic channel released by the calling or called party Call duration for charging Data volume sent through the MSC when the data service borne by the circuit switched (CS) domain is applied. Cause for release of the connection Detailed reason for release of the connection Unique identifier of a call or conversation for a party (A or B) in a call. It is also used to identify some output CDRs that belong to the same connection. Sequence No. of part of output CDRs. This parameter is present only when some CDRs are output. Identification of last CDR
OC
Number of detection points (DP) encountered
OC
Free format Data
C
Level of CAMEL service applied This parameter contains data of FCI messages sent by the SCF. The data can be sent in an FCI message or multiple FCI messages and indicated by corresponding suffix. This parameter is present only when the CAMEL service is applied and the SCP sends FCI messages.
ZTE Confidential Proprietary
M M M
Page 36 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Default call handling 2
OC
GsmSCF address 2
C
Service key 2
C
Free format Data 2
C
Free format data append indicator 2
C
MSC server indication
C
Hot Billing Tag2
C
Msc SPC14
OC
Description A series of CAMEL information IEs. Each IE contains corresponding CAMEL call leg information. This parameter is present only when the CAMEL service is applied. Free format data of a CDR. It is appended to the free format data of the previous partial output CDR. Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. This parameter indicates whether a call invokes the default call handling of the second type of CAMEL service if the second type of CAMEL service is available, for example, the dialed service. This parameter indicates that a call invokes the SCF address of the second type of CAMEL service if the second type of CAMEL service is applied, for example, the dialed service. This parameter indicates the second service logic invoked by a call if the second type of CAMEL service is available, for example, the dialed service. This parameter contains data of FCI messages sent by the SCF for the second type of CAMEL service when the second type of CAMEL service is applied, for example, the dialed service. The data can be sent in an FCI message or multiple FCI messages and indicated by corresponding suffix. This parameter indicates that the free format data in the CDR is appended to the previous partial output CDR when the second type of CAMEL service is applied, for example, the dialed service. Indicate whether the CAMEL call handling is active in the MSC server Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field is the spc14 code of the serving MSC
Msc SPC24
OC
This field is the spc24 code of the serving MSC
Incoming Cic
OC
This field indicates the cic value of the incoming trunk.
Outgoing Cic
OC
This field indicates the cic value of the outgoing trunk.
Incoming TKGP Name
OC
This field indicates the incoming trunk group name.
Outgoing TKGP Name
OC
This field indicates the outgoing trunk group name.
Global Call Reference
OC
Millisecond Duration
OC
BYPASS Flag 2
OC
The Global Call Reference idenfifies a call uniquely within a network and across network. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. This field indicates the AIS SCP BYPASS service defined by operators
Operator ID
OC
This field indicates the operator id, provided in MultiOperator Core Network
Incoming Traffic Type
OC
This field indicates the call is incomming from local network mobile section or local network fixed section or external network.
Outgoing Traffic Type
OC
This field indicates the call is outgoing to local network mobile section or local network fixed section or external network.
CAMEL information
call
Category leg
Free format data append indicator Exchange Identity Record Sequence Number
ZTE Confidential Proprietary
C C OM M
Page 37 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field StartT ime
2.1.13
Category
OC
Description If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
HLR Interrogation An HLR interrogation record is generated when the MSC interrogates mobile subscriber information from the HLR. Table 14 HLR Interrogation Record
5
2.1.14
Field Record Type Served IMSI Served MSISDN
M C M
Category
Recording Entity
M
Basic Service
OC
Routing Number
C
Interrogation time stamp
M
Number of Forwarding
C
Interrogation Result
C
Record extensions
OC
Exchange Identity Record Sequence Number
OM
Hot Billing Tag2
C
Operator ID
OC
SDC Interrogation Flag
OC
The field indicates that the SDC(Subscriber Data Center) interrogation is applied
Calling Number Before SDC Interrogation
OC
The field is Calling Number before SDC interrogation
Original Called Number Before SDC Interrogation
OC
The field is interrogation
SDC Interrogated Calling Number
OC
The field is Calling Number which is interrogated from SDC
SDC Interrogated Original Called Number
OC
The field is Original Called Number interrogated from SDC
M
Description HLR interrogation record IMSI of the party being interrogated MSISDN of the subscriber being interrogated E.164 number of the GMSC (serial number of GMSC: TON + NPI + MSC ID) Only for teleservice 21 (SMS-MT) Routing number (MSRN or forwarding number) provided by the HLR for connection Time when the interrogation is invoked. Number of times when the call is forwarded through the ISUP. Result of the interrogation request if unsuccessful. A series of CDR extension information defined by the network or manufacturer Identity of the MSC that generates original bills. Record sequence number. It is the unique ID of a CDR. Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field indicates the operator id, provided in MultiOperator Core Network
Original Called Number before SDC
which is
Mobile Terminated Location Request (MT-LR) If enabled, an LCS-MT record shall be produced, within the visited MSC, for each mobile a terminated location request is performed for. Table 15 LCS-MT record
10 Field
Category
Description
Record Type
M
LCS-MT record.
Recording Entity
M
The E.164 number of the visited MSC producing the record.
LCS Client Type
M
The type of the LCS client that invoked the LR.
ZTE Confidential Proprietary
Page 38 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.15
Field
Category
Description
LCS Client Identity
M
Further identification of the LCS client .
Served IMSI
M
The IMSI of the subscriber the LR is invoked for.
Served MSISDN
OM
The MSISDN of the subscriber the LR is invoked for.
Location Type
M
The type of the location request.
LCS QoS
C
QoS of the LR, if available.
LCS Priority
C
Priority of the LR, if available.
MLC Number
M
The E.164 address of the requesting GMLC.
Event Time Stamp
M
The time at which the LR was received by the MSC.
MeasureDuration
OM
The duration of proceeding the location request .
Notification To MS User
C
The privacy notification to MS user that was applicable when the LR was invoked, if available.
Privacy Override
C
This parameter indicates if MS privacy was overridden by the LCS client, if available.
Location
OM
The LAC and CI when the LR is received.
Location Estimate
OC
The location estimate for the subscriber if contained in geographic position and the LR was successful.
Positioning Data
C
The positioning method used or attempted, if available.
LCS Cause
OC
The result of the LR if any failure or partial success happened as known at the radio interface.
Diagnostics
C
Detailed cause for failure or partial success of the location service
System Type
M
System type applied for the location service, GERAN of the EDGE or UTRAN of WCDMA
Record extensions
OC
A series of CDR extension information defined by the network or manufacturer
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Hot billing tag
C
Hot billing tag defined by operators
Cause for Termination
OM
Cause for termination of the location service
Additional Chg. Info
OC
Charge/No charge and additional charge indicator
Hot Billing Tag 2
C
Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished.
Operator ID
OC
Sequence
This field indicates the operator id, provided in MultiOperator Core Network
Mobile Originated Location Request (MO-LR) If enabled, an LCS-MO record shall be produced, within the visited MSC, for each mobile an originated location request is performed for. Table 16 LCS-MO record
5 Field
Attr.
Description
Record Type
M
LCS-MO record.
Recording Entity
M
The E.164 number of the visited MSC producing the record.
LCS Client Type
C
The type of the LCS client that invoked the LR, if available.
LCS Client Identity
C
Further identification of the LCS client, if available.
ZTE Confidential Proprietary
Page 39 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.16
Field
Attr.
Description
Served IMSI
M
The IMSI of the subscriber the LR is invoked for.
Served MSISDN
OM
The MSISDN of the subscriber the LR is invoked for.
MOLR Type
M
The type of the LR.
LCS QoS
C
QoS of the LR, if available.
LCS Priority
OC
Priority of the LR, if available.
MLC Number
C
The E.164 address of the involved GMLC, if available.
Event Time Stamp
M
The time at which the LR was received by the MSC.
MeasureDuration
OM
The duration of proceeding the location request .
Location
OM
The LAC and CI when the LR is received.
Location Estimate
OC
The location estimate for the subscriber if contained in geographic position and the LR was successful.
Positioning Data
C
The positioning method used or attempted, if available.
LCS Cause
C
The result of the LR if any failure or partial success happened as known at the radio interface.
Diagnostics
C
Detailed cause for failure or partial success of the location service
System Type
M
System type applied for the location service, GERAN of the EDGE or UTRAN of WCDMA
Record extensions
OC
A series of CDR extension information defined by the network or manufacturer
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Hot billing tag
C
Indicate the calling party in the call is a hot billing subscriber.
Cause for Termination
OM
Cause for termination of the location service
Additional Chg. Info
OC
Charge/No charge and additional charge indicator
Hot Billing Tag 2
C
Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished.
Operator ID
OC
Sequence
This field indicates the operator id, provided in MultiOperator Core Network
Network Induced Location Request (NI-LR) If enabled, an LCS-NI record shall be produced, within the visited MSC, for each network induced location request performed for a MS e.g. in case of emergency call.
5
ZTE Confidential Proprietary
Table 17 LCS-NI record
Page 40 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.17
Field Record Type Recording Entity
Category M M
LCS Client Type
C
LCS Client Identity
C
Served IMSI
C
Served MSISDN
C
Served IMEI
C
EMS-Digits
OC
EMS-Key
OC
LCS QoS LCS Priority MLC Number
C C C
Event Time Stamp
M
MeasureDuration Location Estimate
OM OC
Positioning Data
C
LCS Cause
C
Diagnostics
C
System Type
M
Record extensions
OC
Record Number
M
Sequence
Hot billing tag
C
Cause for Termination Additional Chg. Info
OM OC
Hot Billing Tag 2
C
Operator ID
OC
Description LCS-NI record. The E.164 number of the visited MSC producing the record. The type of the LCS client that invoked the LR, if available. Further identification of the LCS client, if available. The IMSI of the calling party the LR is executed for if supplied by the UE. The MSISDN of the calling party the LR is executed for if supplied by the UE. The IMEI of the calling party the LR is executed for if available. The emergency service routing digits, if emergency call. The emergency service routing key, if emergency call. QoS of the LR, if available. Priority of the LR, if available. The E.164 address of the involved GMLC, if available. The time at which the LR was received by the MSC. The duration of proceeding the location request . The location estimate for the subscriber if contained in geographic position and the LR was successful. The positioning method used or attempted, if available. The result of the LR if any failure or partial success happened as known at the radio interface. Detailed cause for failure or partial success of the location service System type applied for the location service, GERAN of the EDGE or UTRAN of WCDMA A series of CDR extension information defined by the network or manufacturer Record sequence number. It is the unique ID of a CDR. Indicate the calling party in the call is a hot billing subscriber. Cause for termination of the location service Charge/No charge and additional charge indicator Hot billing tag 2 defined by operators. The pre-paid service and post-paid service subscribers are distinguished. This field indicates the operator id, provided in MultiOperator Core Network
USSD Operation Record
5
A record is generated by VMSC when the mobile or network originated a USSD operation request.The record is used to record the original information of the operation. Table 18 USSD record
ZTE Confidential Proprietary
Page 41 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.18
Field Record Type Served IMSI Served IMEI Served MSISDN MS Classmark Recording Entity
Category M M C M M M
Event time stamps: Location
C C M
Call reference
M
USSD interaction count Unstructured SS Data USSD operation code USSD data coding scheme USSD Service Code Error code
OM O O OM
System Type
M
Hot billing tag Hot Billing Tag 2
C C
Exchange Identity Record Sequence Number Operator ID
OM M
O Oc
OC
Description USSD record IMSI of the served subscriber IMEI of the served ME , if available. The primary MSISDN of the served party The mobile station classmark employed. The E.164 number of the visited MSC producing the record Start time: start time of USSD request Answer:end time of USSD operation The identity of the cell or the SAC at the time of CDR creation, including the location area code. A local identifier distinguishing between transactions on the same MS USSD interaction count Unstructured SS Data USSD operation code USSD data coding scheme Service Code Result of the attempted operation if the operation is unsuccessful. This field indicates the use of GERAN, UTRAN (or a value of unknown). This field is present when either the UTRAN or GERAN air-interface is used on call set-up. For an open CDR in a 2G NE (responsible for the CDR), the field is not present (even if the call is handed off to a 3G air interface). For a CDR in a 3G NE (responsible for the CDR), the value unknown shall be used after handover. Hot billing tag defined by operators Hot billing tag 2 defined by operators. The prepaid service and post-paid service subscribers are distinguished. Identity of the VMSC that generates original bills. Record sequence number. It is the unique ID of a CDR. This field indicates the operator id, provided in MultiOperator Core Network
VIG Record
5
A record is generated by the VIG when a mobile terminal(e.g 3G-343M) is interconnected with the video terminal of other network.The record is used to record the charging information of vedio telephone service. Table 19 VIG record
ZTE Confidential Proprietary
Page 42 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.19
Field Record Type Calling Number Called Number
Category M OM OM
VIG Call Type Event time stamps: Call duration Cause for termination Diagnostics
M C C M M OC
Sequence no.
C
Last Long Part Ind. Call reference
C M
Call Data Rate
M
Exchange Identity Record Sequence Number Millisecond Duration
OM M
OC
Description Indicate the type of record is VIG The number of the calling party if available. The number of the called party.Only provided when the called party is a mobile subscriber The direction of the call (i.e incoming,outgoing) Start time:the start time of the call End time:the end time of the call The duration of the call The reason for the release of the call. A more detailed reason for the release of the connection. Partial record sequence number, only present in case of partial records. Identification of last CDR A local identifier distinguishing between transactions on the same MS The Data Rate of the call which is represented by kbps Identity of the VMSC that generates original bills. Record sequence number. It is the unique ID of a CDR. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time.
MTP3 Signnaling Record
5
A MTP3 signnaling record is used to collect the usage of MTP3 signnaling in MSCServer and MGW. If it is configured to output MTP3 billing and billing validate record, the record is output periodically. The period can be configured by man-machine interface. Table 20 MTP3 Signnaling Record Field
Category
Description
Record Type
M
Identifies the type of record.
Record Sequence Number
M
Record sequence number. It is the unique ID of a CDR.
Bill Type
M
The type of the record. The value of the field can be charging or charging validate.
Service Identifier
M
The service identifier of MTP3 message
SPC
M
The SPC code of the MSCServer or MGW that generate the record.
OPC
M
The SPC code of the MTP3 message originating node.
DPC
M
The SPC code of MTP3 message destination node
Charged Neighbor SPC
M
The SPC code of the charged neighbor
Amount Of Messages
M
The amount of messages from the opc to dpc during the statistic period.
Amount Of Octets
M
The amount of octets from the opc to dpc during the statistic period
Record Opening Time
M
The opening time of the record
Record Closing Time
M
The closing time of the record
Physical Location
M
The field is used to identify the MP that generate the record
ZTE Confidential Proprietary
Page 43 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.20
SCCP Signnaling Record A SCCP signnaling record is used to collect the usage of SCCP signnaling in MSCServer and MGW. If it is configured to output SCCP billing and billing validate record, the record is output periodically. The period can be configured by manmachine interface.
5
Table 21 SCCP Signnaling Record Field
2.1.21 10
Category
Description
Record Type
M
Identifies the type of record.
Record Sequence Number
M
Record sequence number. It is the unique ID of a CDR.
Bill Type
M
The type of the record. The value of the field can be charging or charging validate.
SPC
M
The SPC code of the MSCServer or MGW that generate the record.
OPC
M
The SPC code of the SCCP message originating node.
DPC
M
The SPC code of SCCP message destination node
SSN
M
The SSN of the SCCP signnaling
Amount Of Global Translated Messages
M
The amount of SCCP messages that have been GT translated by the node
Record Opening Time
M
The opening time of the record
Record Closing Time
M
The closing time of the record
Physical Location
M
The field is used to identify the MP that generate the record
CAMEL4 Mobile Originated Call If the MSC / gsmSCF is able to provide CAMEL CPH services, this kind of record shall replace records Mobile originated call attempt. This applies to all mobile originated call attempts, even if no CPH operations are used in the individual call. Record fields that are specific to individual outgoing legs are recorded in the grouped field ‘Camel Call Leg Information’. Table 22 CAMEL4 MOC Record
15 Field
Category
Description
Record Type
M
Mobile originated record
Served IMSI
M
IMSI of the calling party
Served IMEI
C
IMEI of the calling ME , if available.
Served MSISDN
OM
The primary MSISDN of the calling party
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Roaming Number
OC
The Mobile Station Roaming Number employed to route this connection, if applicable.
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Incoming TKGP
OC
The MSC trunk group on which the call originated , usually from the BSS. If available in 3G, this parameter shall be supplied.
Location
M
The identity of the cell or the SAC at the time of CDR creation, including the location area code.
ZTE Confidential Proprietary
Page 44 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
Change of Location
OC
A list of changes in Location Area Code / Service Area Code / Cell Id. Each time-stamped.
Basic service Change of Service
M
Bearer or teleservice employed. 'speech' in case of CAMEL CPH calls.
OC
A list of changes of basic service during a connection each time-stamped.
C
Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked.
OC
The charge advice parameters sent to the MS on call set-up. This field shall be supplied only when AoC parameters have been sent.
OC
New AOC parameters sent to the MS e.g. as a result of a tariff switch over, including the time at which the new set was applied. This field shall be supplied only when AoC parameters have been sent.
M
The mobile station classmark employed on call set-up.
OC
A list of changes to the classmark during the connection each time-stamped
C
Seizure time: time of incoming traffic channel seizure (for unsuccessful call attempts) Answer: time of answer (for successful calls) Release time: time of traffic channel release
Supp. Services
AOC Parameters
Change of Parameters
AOC
MS Classmark Change of Classmark
Event time stamps:
C OM M
The chargeable duration of the connection for successful calls, the holding time for call attempts.
OC
The type of radio traffic channel (full / half etc.) requested by the MS.
OC
The type of radio channel actually used (full or half rate).
Change of Rad. Chan.
OC
A list of changes each time stamped.
Cause for termination
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Call duration Radio Chan. Requested Radio Chan. Used
Diagnostics Call reference Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Indicator
C
Identification of last CDR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Additional Chg. Info
OC
Charge/no charge indicator and additional charging parameters, when available.
Record extensions
OC
A set of network / manufacturer specific extensions to the record, when available.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
ZTE Confidential Proprietary
Sequence
Page 45 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Free format Data
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
CAMEL CPH call leg information
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
System Type
M
This field indicates the use of GERAN, UTRAN (or a value of unknown). This field is present when either the UTRAN or GERAN air-interface is used on call set-up. For an open CDR in a 2G NE (responsible for the CDR), the field is not present (even if the call is handed off to a 3G air interface). For a CDR in a 3G NE (responsible for the CDR), the value unknown shall be used after handover.
Partial Record Type
OC
Speech Version Supported
OC
Speech version supported by the MS with highest priority indicated by MS
Speech Version Used
OC
Speech version used for that call
Oc
Bit rate guaranteed by the UMTS carrier service for users or applications. It is based on available resources. It can make admission easy to control and fit for resource allocation in the UMTS. This parameter is present in the UMTS data connections only.
Maximum bit rate
Oc
The maximum bit rate can be used to establish coding restrictions in the down lines of the wireless interface. It is used to restrict the bit rate from transmission to applications or external network and to define the maximum user bit rate for the applications that can use different bit rates for transmission. This parameter is present for the UMTS data connections only.
Call Segment Id
Oc
The identify of the call segment.
Subscriber Category
C
Subscriber property registered by mobile subscribers in the HLR
Global Call Reference
OC
Millisecond Duration
OC
Number encountered
of
DP
Level of CAMEL service
Guaranteed bit rate
ZTE Confidential Proprietary
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
The Global Call Reference idenfifies a call uniquely within a network and across network. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time.
Page 46 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.22
Field
Category
Description
Hot billing tag
C
Hot billing tag defined by operators
Is CAMEL Call
OM
The field indicates that the CAMEL service is applied in the call.
CAMEL4 Mobile Originated Call Forwarding
5
If the MSC / gsmSCF is able to provide CAMEL CPH services, this kind of record shall replace records Mobile originated call forwarding attempt. This applies to all mobile originated call forwarding attempts, even if no CPH operations are used in the individual call. Table 23 CAMEL4 Mobile Originated Call Forwarding Record Field
Category
Description
Record Type
M
Mobile originated forwarding record
Served IMSI
M
IMSI of the calling party
Served IMEI
C
IMEI of the calling ME , if available.
Served MSISDN
OM
The primary MSISDN of the calling party
Calling Number
OM
The address of the calling party.
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Incoming TKGP
OC
The MSC trunk group on which the call originated , usually from the BSS. If available in 3G, this parameter shall be supplied.
Basic service
M
Bearer or teleservice employed. 'speech' in case of CAMEL CPH calls.
C
Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked.
C
Seizure time: time of incoming traffic channel seizure (for unsuccessful call attempts) Answer: time of answer (for successful calls) Release time: time of traffic channel release
Supp. Services
Event time stamps:
Call duration Cause for termination Diagnostics Call reference
C OM M
The chargeable duration of the connection for successful calls, the holding time for call attempts.
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Indicator
C
Identification of last CDR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Additional Chg. Info
OC
Charge/no charge indicator and additional charging parameters, when available.
Record extensions
OC
A set of network / manufacturer specific extensions to the record, when available.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
ZTE Confidential Proprietary
Sequence
Page 47 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
OC
This field is to distinguish CAMEL call forwarding from the standard GSM call forwarding.
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Free format Data
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
CAMEL CPH call leg information
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
System Type
M
This field indicates the use of GERAN, UTRAN (or a value of unknown). This field is present when either the UTRAN or GERAN air-interface is used on call set-up. For an open CDR in a 2G NE (responsible for the CDR), the field is not present (even if the call is handed off to a 3G air interface). For a CDR in a 3G NE (responsible for the CDR), the value unknown shall be used after handover.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Call Segment ID
Oc
Forward Type
M
Subscriber Category
C
The identify of the call segment. Type of forwarding, i.e forward on busy,forward on unconditional. Subscriber property registered by mobile subscribers in the HLR
Global Call Reference
OC
Millisecond Duration
OC
Hot billing tag
C
Is CAMEL Call
OM
CAMEL Indicator
Initiated
CF
Default call handling Number encountered
of
DP
Level of CAMEL service
ZTE Confidential Proprietary
The Global Call Reference idenfifies a call uniquely within a network and across network. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time. Hot billing tag defined by operators The field indicates that the CAMEL service is applied in the call.
Page 48 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.23
Terminating CAMEL4 Interrogation Call
5
If the MSC / gsmSCF is able to provide CAMEL4 CPH services, this kind of record shall replace records Terminating CAMEL4 call attempt. This applies to all terminating CAMEL4 call attempts, even if no CPH operations are used in the individual call. Table 24 Terminating CAMEL4 record Field
Category
Description
Record Type
M
Terminating CAMEL interrogation
Served IMSI
M
IMSI of the calling party
Served MSISDN
OM
The primary MSISDN of the calling party
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Interrogation time stamp
M
Time at which the interrogation was invoked.
gsmSCF address
M
The CAMEL server serving the subscriber.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
Record extensions
OC
A set of network/ manufacturer specific extensions to the record, when available.
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Calling Number
OM
The address of the calling party.
Incoming TKGP
OC
The MSC trunk group on which the call originated , usually from the BSS. If available in 3G, this parameter shall be supplied.
C Event time stamps:
C OM
Call duration Cause for termination Diagnostics Call reference
Seizure time: time of incoming traffic channel seizure (for unsuccessful call attempts) Answer: time of answer (for successful calls) Release time: time of traffic channel release
M
The chargeable duration of the connection for successful calls, the holding time for call attempts.
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Indicator
C
Identification of last CDR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Number encountered
Sequence of
ZTE Confidential Proprietary
DP
Page 49 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.1.24
Field
Category
Description
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
Free format Data
C
This field contains data sent by the gsmSCF in the Furnish Charging Information (FCI) message(s). The data can be sent either in one FCI message or several FCI messages with append indicator. Shall be present only if CAMEL is applied.
CAMEL CPH call leg information
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Term CAMEL Call Type
OC
This field indicates the call is incomming from (or outgoing to) local network mobile section or local network fixed section or external network.
Call Segment ID
Oc
The identify of the call segment.
Global Call Reference
OC
Millisecond Duration
OC
The Global Call Reference idenfifies a call uniquely within a network and across network. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time.
SCP Mobile Originated Call This applies to MOC record created for each gsmSCF initiated call attempt and for new parties in new call segments, which are created in a new call dialogue. Table 25 SCP MOC Record Field
Category
Description
Record Type
M
Mobile originated record
Served MSISDN
OM
The primary MSISDN of the calling party
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Basic service Cause for termination Diagnostics Call reference
M
Bearer or teleservice employed. 'speech' in case of CAMEL CPH calls.
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Indicator
C
Identification of last CDR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Additional Chg. Info
OC
Charge/no charge indicator and additional charging parameters, when available.
Record extensions
OC
A set of network / manufacturer specific extensions to the record, when available.
ZTE Confidential Proprietary
Sequence
Page 50 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
CAMEL CPH call leg information
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Call Segment ID
Oc
The identify of the call segment.
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
Is CAMEL Call
OM
Number encountered
2.1.25
of
DP
The field indicates that the CAMEL service is applied in the call.
Call Segment Record This applies to all terminating CAMEL4 call attempts, even if no CPH operations are used in the individual call. Table 26 Call Segment Record Field
Category
Description
Record Type
M
Mobile originated record
Served IMSI
M
IMSI of the calling party
Served IMEI
C
IMEI of the calling ME , if available.
Served MSISDN
OM
The primary MSISDN of the calling party
Called Number
OM
The address of the called party i.e. the number dialled by the calling
Recording Entity
M
The E.164 number of the visited MSC producing the record.
Basic service
M
Bearer or teleservice employed. 'speech' in case of CAMEL CPH calls.
C
Supplementary services invoked as a result of this connection. This field shall be present when one or more supplementary services have been invoked.
M
The reason for the release of the connection.
OM
A more detailed reason for the release of the connection.
M
A local identifier distinguishing between transactions on the same MS
Supp. Services Cause for termination Diagnostics Call reference
ZTE Confidential Proprietary
Page 51 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Field
Category
Description
Sequence no.
C
Partial record sequence number, only present in case of partial records.
Last Long Part Indicator
C
Identification of last CDR
Record Number
M
Record sequence number. It is the unique ID of a CDR.
Additional Chg. Info
OC
Charge/no charge indicator and additional charging parameters, when available.
Record extensions
OC
A set of network / manufacturer specific extensions to the record, when available.
gsmSCF address
C
Identifies the CAMEL server serving the subscriber. Shall be present only if CAMEL is applied.
Service key
C
The CAMEL service logic to be applied. Shall be present only if CAMEL is applied.
Network Call Reference
C
An identifier to correlate transactions on the same call taking place in different network nodes, shall be present if CAMEL is applied.
MSC Address
C
This field contains the E.164 number assigned to the MSC that generated the network call reference. Shall be present only if CAMEL is applied.
Default call handling
OC
Indicates whether or not a CAMEL call encountered default call handling. This field shall be present only if default call handling has been applied.
OC
Number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
Level of CAMEL service
OC
Indicator for the complexity of the CAMEL feature used. Shall be present only if CAMEL is applied.
CAMEL CPH call leg information
C
Set of CAMEL information IEs. Each of these IEs contains information related to one outgoing CAMEL call leg. Shall be present only if CAMEL is applied.
Free format data append indicator
C
Indicator if free format data from this CDR is to be appended to free format data in previous partial CDR. Shall be present only if CAMEL is applied.
Partial Record Type
OC
Indicates the event (time limit etc.) that caused the generation of a partial record.Provided if SCUDIF service is used.
Call Segment ID
Oc
The identify of the call segment.
Global Call Reference
OC
The Global Call Reference idenfifies a call uniquely within a network and across network.
Is CAMEL Call
OM
Number encountered
Sequence
of
DP
The field indicates that the CAMEL service is applied in the call.
2.2
Description of Fields
2.2.1
Additional Charging Information The field is correspond to the ASN.1 field “additionalChgInfo”.
5
10
This field consists of two parts, a charge indicator and other charging parameters. The charge indicator is derived from the information contained in the ISUP “backward call indicator” and may be used to store a charge indicator (charge/no charge) received from another network node. Other parameters are non-standard and intended to permit inclusion of further charging information received from the Intelligent Network and/or value added service nodes.
ZTE Confidential Proprietary
Page 52 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.2
Amount Of Global Translated Messages This field is correspond to the ASN.1 field “amountOfGTMessages”. This field contains the amount of global translated SCCP signaling messages in current node.
5 2.2.3
Amount Of Messages This field is correspond to the ASN.1 field “amountOfMessage”. This field contains the amount of MTP3 signnaling messages transferred from the originating node to the destination node by current node.
10 2.2.4
Amount Of Octets This field is correspond to the ASN.1 field “amountOfOctets”. This field contains the octets of MTP3 signnaling messages transferred from the originationg node to the destination node by current node.
15 2.2.5
AoC Parameters / Change of AoC Parameters The field is correspond to the ASN.1 field “aocParameters/changeOfAOCParms”. The AoC parameter field contains a set of charge of advice (AoC) parameters sent to an MS on call setup. If more sets of parameters are sent during a call, for example as a result of change in charge rate, this may be recorded in the Change of AoC Parameter field including the time at which the change occurs.
20
Note that the Change of AoC Parameters field is optional and is not required if partial records are generated for change of the charge rate. AoC parameters are defined in 3GPP TS 22.024.
25 2.2.6
A Release Cause The field is correspond to the ASN.1 field “aReleaseCause”. When established MO or MT call is released because of Iu connetion failure, this filed shows the BSSAP cause for the failure.
30
The BSSAP cause is defined in detail in 3GPP TS 48.008.
2.2.7
Basic Service/Change of Service/ISDN Basic Service The field is correspond to the ASN.1 field “basicService/changeOfService/ isdnBasicService”.
35 The basic service field contains the code of basic service employed on call setup. Any change for the basic service during a connection shall be recorded in the change of service field, including the time at which the change takes place. The change of service field is optional and may be omitted if partial records are generated when the basic service is changed.
40
The coding of basic services are defined in detail in 3GPP TS 29.002.
ZTE Confidential Proprietary
Page 53 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The basic service employed is generally not recorded in the transit CDR. However, if the device at which a call is originated or terminated through ISDN signaling messages, the corresponding ISDN basic service code shall be recorded in the CDR. One possible example is the direct connection of an ISDN PABX to the MSC/VLR
52.2.8
Bill Type The field is correspond to the ASN.1 field “billType”. This field is used to identify the record is for billing or billing validate.
2.2.9 10
BSC Identification The field is correspond to the ASN.1 field “bSCIdentification” This field indicates the BSC spc14 code where the served subscriber is located when the call is started.This field is provided only when 2G radio access technology is used.
152.2.10
BSC Identification 24 The field is correspond to the ASN.1 field “bscIdentification24” This field indicates the BSC spc24 code where the served subscriber is located when the call is started.It is configurable to provide this field or not, the field “BSC Identification” not provide when this field is present.
20 2.2.11
BYPASS The field is correspond to the ASN.1 field “byPass”. This field indicates that the BYPASS service is used, special for WANA PPS.
252.2.12
BYPASS Flag 2 The field is correspond to the ASN.1 field “byPassFlag2”. This field indicates the AIS SCP BYPASS service defined by operators.
2.2.13
Call Duration
30
The field is correspond to the ASN.1 field “callDuration”.
35
This field contains relevant call duration in seconds. For complete (answered) calls, it is the chargeable duration from when the calls are answered to when the channel is released. For some records, it is the duration of the CDRs of the parts instead of the cumulative duration of the call. Note that the time stamps may be expressed in terms of tenths of seconds or even milliseconds, and as a result, the calculation of the call duration may result in rounding or truncation of the measured duration to an integer of seconds. Whether the rounding or truncation is to be used for the MSC is beyond the scope of this document. However, the following principles shall be complied with:
40
1)
The CDR whose call duration is 0 second shall not be generated.
ZTE Confidential Proprietary
Page 54 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2) The same method of truncation or rounding shall be applied to both single and partial records. If CAMEL is invoked for the call and a control relationship is existing, the call may continue after the gsmSSF receives a RELEASE or a DISCONNECT from the called party. The call duration of the incoming leg is stored in the major CDR, and the duration of outgoing leg is stored in the corresponding CAMEL information module.
5
The figure below gives an example on how to use call duration and time stamp. It shows how an MS controlled by the CAMEL originates an intelligent service.
10
The uppermost arrow marks the overall duration of the call that is to be measured and stored in the main body of the corresponding MOC record. The duration before t5 (incoming leg) or t4 (outgoing leg) needs not to be stored because the call is answered later. The call duration in the first outgoing leg module contains the time interval from t4 to t6 (period). The call duration measurement for the second outgoing leg starts with t9 and end at t10 (interval).
15
(The timestamps t1, t2, t3, t7, t8 and t12 are mentioned for the sake of completion only.) )
inc. leg
outg. leg 1
outg. leg 2
outg. leg 3 t1 t2 t3
t4 t5
t6 t7 t8 t9
t10 t11 t12
call duration of incoming leg = call duration of outgoing leg = holding time of outgoing leg =
t1 t2 t3 t4 t5 t6 t7 t8 t9 t10
Signaling Message Sent/Received Trigger Detection Point Encountered SETUP; TDP(control) IAM ACM ANSWER CONNECT RELEASE; EDP(control) IAM ACM ANSWER RELEASE; EDP(control)
t11
IAM
t12 t13
ACM RELEASE; EDP(control)
Time Point
Recording Duration seizure of outg. leg 1 start of call duration (outg. leg 1) start of call duration (inc. leg) stop of call duration (outg. leg 1) seizure of outg. leg 2 start of call duration (outg. leg 2) stop of call duration (outg. leg 2) seizure of outg. leg 3 start of holding time (outg. leg 3) stop of holding time (outg. leg 3)
20
2.2.14
Called IMEI The field is correspond to the ASN.1 field “callledIMEI”. This field indicates IMEI of the called ME , if available.
252.2.15
Called IMSI The field is correspond to the ASN.1 field “callledIMSI”.
ZTE Confidential Proprietary
Page 55 of 204
t13
time
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field indicates IMSI of the called party.
2.2.16
Call Segment Id The field is correspond to the ASN.1 field “callSegmentId”.
5 The identify of the call segment.
2.2.17
Call Reference The field is correspond to the ASN.1 field “callReference”.
10
This field is derived from transactions defined in 3GPP TS24.008 and uniquely identifies a call or transaction at one side of the call (party A or party B). It is also used to identify some output CDRs that belong to the same connection. To make it clear, the global call reference is not provided in the GSM system. The call reference field cannot be used to combine MOC and MTC records for end-toend connections.
15 2.2.18
Calling/Called Location The field is correspond to the ASN.1 field “callingLocation/calledLocation” This field indicates the location of the calling/called subscriber when the call is started.
20 2.2.19
Calling/Called Party Roaming Indicator The field is correspond to “callingPartyRoamingInd/calledPartyRoamingInd”
25
the
ASN.1
field
This field indicates the roaming number of the calling/called party.The field is provided if the calling/called subscriber is roaming when the call is started.
2.2.20
Calling/Called/Connected/Translated Number The field is correspond to the ASN.1 “callingNumber/calledNumber/connectedNumber/translatedNumber”.
field
30 In general, the number is an ITU-T E.164 number. However, other number plans such as X.121 can also be included. Each of these fields contains number type and number plans defined in 3GPP TS24.008 in detail. Where appropriate, these fields may also contain the display and screening information defined in 3GPP TS24.008.
35
Called numbers are the ones received from MSs on mobile originated call setup as defined in 3GPP TS24.008. Similarly, calling numbers are the ones received from the network on mobile terminated call setup. In case of CAMEL initiated call forwarding (CF), the called (forwarded-to) number is returned by CAMEL. Translated numbers are the ones received from MSs and then converted by the MSC server.
40
ZTE Confidential Proprietary
Page 56 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Connected numbers are the ones of the connected party as defined in 3GPP TS24.008. It may be the same as or different from the called number. The following examples describe the use of these fields. Example 1: A called number is the connected number.
5
Normal calls from a mobile subscriber to a mobile or PSTN subscriber. Example 2: A called number is not the connected number. In the case of routing to the PABX with the automatic call distribution function or to an ISDN basic access with multiple devices, the connected number is the one in the number group of the party finally connected.
10
Example 3: Numbers in the MTC record generated for subscriber B when subscriber A calls subscriber B and the call is forwarded to subscriber C. In the case of call forwarding, the connected number in the MTC record for subscriber B is the number of subscriber C and the calling number is the number of subscriber A.
15
Example 4: Translated number Called number received from an MS and converted based on digit translation by the MSC server.
2.2.21
Calling Number Before SDC Interrogation The field is correspond to the ASN.1 field “callingNumberBeforeSDC”
20 The field indicates that the SDC(Subscriber Data Center) interrogation is applied.
2.2.22
Calling Party Number The field is correspond to the ASN.1 field “originalCalledPartyNumber ” in CAMELModificationParameters.
25
This field contains called numbers modified by the CAMEL service.
2.2.23
CAMEL Call Leg Information The field is correspond to the ASN.1 field “cAMELCallLegInformation”.
30
This field contains a group of CAMEL information elements (IEs) based on the number of outgoing CAMEL call legs.
2.2.24
CAMEL Information The field is correspond to the ASN.1 field “CAMELInformation”.
35
This field contains a list of parameters related to one CAMEL outgoing call leg. As a network option, parameters that are identical to the corresponding values in the high-level structure of records are not recorded again. That means if this group of parameters does not contain a value, the value provided in the basic record is valid. This may lead to an empty or even absent structure, if no parameters are modified.
402.2.25
CAMEL Information Millisecond Duration The field is correspond to the ASN.1 field “camelInfoMillisecDuration”.
ZTE Confidential Proprietary
Page 57 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time of CAMEL outgoing call leg.
2.2.26
CAMEL Initiated CF Indicator The field is correspond to the ASN.1 field “cAMELInitCFIndicator”.
5 The purpose of this field is to distinguish CAMEL call forwarding from the standard GSM call forwarding. From the view of basic call state model (BCSM), this field is set to “CF” as long as the originating CAMEL subscription information (O_CSI) is applied after the destination is changed for the terminating CAMEL call processing. To make it clear, this indicator does not depend on the call parameters (that is, redirection information) received in the CAP_CONNECT message of other terminating CAMEL subscription information (T_CSI) service. This indicator also indicates that another record may be generated. The record contains the charging information related to the terminating CAMEL service and the charging information related to the originating CAMEL service.
10
15 2.2.27
CAMEL Modified Service Centre The field is correspond to the ASN.1 field “cAMELSMSCAddress”.
20
This field contains SMS-SC address modified by CAMEL service. If this field is present, the Service Centre field contains the SMS-SC address before being modified by the CAMEL service.
2.2.28
CAMEL SMS Information The field is correspond to the ASN.1 field “CAMELSMSInformation”.
25 This field contains the following CAMEL information for mobile originated SMS. Default SMS handling This field indicates whether the CAMELserivice encounters the default SMS handling. The field is present only when the default SMS handling is applied.
30
Free format data Calling party number This field contains calling numbers modified by the CAMEL service.
CAMEL modified service center This field contains the SMS-C address modified by the CAMEL service.
35
Destination subscriber number This field contains SMS destination numbers modified by the CAMEL service.
Destination SmsRefrenceNumber This field contains SMS call reference number.
2.2.29 40
CAMEL CPH Call Leg Information The field is correspond to the ASN.1 field “cAMELCPHCallLegInformation”.
ZTE Confidential Proprietary
Page 58 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field contains a group of CAMEL CPH information elements (IEs) based on the number of outgoing CAMEL CPH call legs.
2.2.30
CAMEL CPH Information The field is correspond to the ASN.1 field “CAMELCPHInformation”.
5 This field contains a list of parameters related to one CAMEL CPH outgoing call leg. As a network option, parameters that are identical to the corresponding values in the high-level structure of records are not recorded again. That means if this group of parameters does not contain a value, the value provided in the basic record is valid. This may lead to an empty or even absent structure, if no parameters are modified.
10 2.2.31
Cause for Termination The field is correspond to the ASN.1 field “CauseForTern”.
15
This field contains possible causes for common release, including: Normal release CAMEL initiated call release Partial record generation Partial record upon call re-establishment
20
Unsuccessful call attempt Abnormal release in the normal stage Location service request originated by unauthorized network Location service request originated by unauthorized client Location method failure upon execution of location service
25
Unknown or unreachable LCS client upon location service request CAMEL play tone Change of conf due to CPH False answer charge. Fail play tone
30
Release for preemption More detailed causes can be found in the diagnostics field .
2.2.32
Channel Coding Accepted/Channel Coding Used The field is correspond “chanCodingsAcceptable/chanCodingUsed”.
to
the
ASN.1
field
35 This field contains a list of traffic channel coding for HSCSD connections accepted or negotiated by the MS. It is present in the CDRs of HSCSD connections only.
ZTE Confidential Proprietary
Page 59 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.33
Charged Neighbor SPC This field is conrrespond to the ASN.1 field “chargedNeighbor”. This field contains the charged neighbor SPC code.
52.2.34
Concatenated Record Number This field is conrrespond to the ASN.1 field “concatenatedRecordNum”. This field indicates the sequence number of a particular short message within the concatenated short message. In the case of a non-concatenated short message the field value is '01'.
10 2.2.35
Concatenated SMS Reference This field is conrrespond to the ASN.1 field “concatenatedRef”. This field indicates the concatenated short message reference number. The reference number contains a value in the range of ‘01’ to ‘65535’(FFFFH). This reference number is the same for every particular concatenated short message. In the case a of non-concatenated short message the field value is '0' (0000H).
15
2.2.36
Connected Number The field is correspond to the ASN.1 field “connectedNumber”.
20 This field indicates the connected number.
2.2.37
CS Allocation/Retention Priority (CARP) The field is correspond to the ASN.1 field “carp”.
25
CS allocation/retention priority (CARP) of visiting international roaming subscribers. Allocation/Retention Priority is a parameter in the UMTS QoS parameters. It specifies important parameters for the mapping between non-UMTS QoS parameters and UMTS QoS parameters. This field is present in the CDRs for international roaming subscribers.
30 2.2.38
CUG Category The field is correspond to the ASN.1 field “cUGCategory”. This field is reserved for extention.
352.2.39
CUG InterLockCode The field is correspond to the ASN.1 field “cUGInterLockCode”. This field is used to identify different CUGs in the same network. In MOC CDRs, the CUG interlock code indicates that the subscriber has made a CUG call.
40
ZTE Confidential Proprietary
Page 60 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
In MTC CDRs, the CUG interlock code indicates that the subscriber receives a CUG call from a subscriber of another CUG. In call forwarding CDRs, the CUG interlock code indicates that the subscriber has forwarded a CUG call.
5
In roaming call forwarding CDRs, the CUG interlock code indicates that the calling subscriber has made a CUG call.
2.2.40
CUG Index The field is correspond to the ASN.1 field “cUGIndex”.
10
This field contains the codes of user groups. It is significant between subscribers and network only.
2.2.41
CUG Incoming Access Indicator The field is correspond to the ASN.1 field “cUGIncomingAccessInd”.
15
This field indicates the group access capability of users.
2.2.42
CUG Incoming Access Used The field is correspond to the ASN.1 field “cUGIncomingAccessUsed”. This parameter indicates the subscriber has subscribed to CUG supplementary service and received a call from external CUGs.
20 2.2.43
CUG Outgoing Access Used The field is correspond to the ASN.1 field “cUGOutgoingAccessUsed”. This parameter indicates that the subscriber has subscribed to the CUG supplementary service and made a non-CUG call or CUG call.
25 2.2.44
CUG Outgoing Access Indicator The field is correspond to the ASN.1 field “cUGOutgoingAccessIn”. This parameter indicates the CUG outgoing access capability.
302.2.45
Data Rate The field is correspond to the ASN.1 field “dataRate”. This field indicates the rate of the data service. In non-transparent services, the wanted air-interface user rate (WAIUR) of the BC is used.
35
In transparent services, the fixed network user rate (FNUR) is used.
2.2.46
Data Volume The field is correspond to the ASN.1 field “dataVolume”.
ZTE Confidential Proprietary
Page 61 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field contains the number of 64-byte segments transmitted during the use of data services.
2.2.47
DDCFlag The field is correspond to the ASN.1 field “dDCFlag”
5 This field indicates that the Direct Collect Call service is used.
2.2.48
Default Call/SMS Handling The field is correspond “defaultCallHandling/defaultSMSHandling”.
to
the
ASN.1
field
10 This field indicates whether the CAMEL default call handling is available. This field is present only when default call handling is applied. This parameter is defined in the HLR as part of CAMEL subscription information.
2.2.49 15
Destination Number The field is correspond to the ASN.1 field “destinationNumber”. This field contains the destination number to which short messages are sent.
2.2.50
Diagnostics The field is correspond to the ASN.1 field “diagnostics”.
20 This field contains a more detailed technical reason for release of a connection, and the reason may be one of the following: A MAP error from 3GPPTS29.002 A cause from 3GPPTS24.008
25
A cause from 3GPPTS29.078 A cause from ISUP Q.767 The diagnostics information can also contain the specific information of manufacturer and network.
2.2.51 30
Dialed Number The field is correspond to the ASN.1 field “dialledNumber”. Number dialed by subscribers. It is used in originating calls only.
2.2.52
Direct SMS Flag The field is correspond to the ASN.1 field “directSmsFlag”.
35 Indicate that the short message is routed via the SMSC or direct delivery without the SMSC.
ZTE Confidential Proprietary
Page 62 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.53
DPC The field is correspond to the ASN.1 field “dPC”. This field contains the SPC code of the destination node that will be billed or validated.
5 2.2.54
DPNumber The field is correspond to the ASN.1 field “dPNumber”. This field indicates the number that counts how often armed detection points (TDP and EDP) were encountered. Shall be present only if CAMEL is applied.
10 2.2.55
EMLPP Priority Level The field is correspond to the ASN.1 field “eMLPPPriorityLevel”. This field indicates the actually used priority level when the eMLPP service is invoked.
15 2.2.56
EMLPP Request Priority Level The field is correspond to the ASN.1 field “eMLPPRequestPriorityLevel”. This field indicates the subscription priority level when the eMLPP service is invoked.
20 2.2.57
EMS-Digits The field is correspond to the ASN.1 field “emsDigits”. This parameter is applicable to the emergency service in North America and gives routing numbers defined in TS 29.002.
25 2.2.58
EMS-Key The field is correspond to the ASN.1 field “emsKey”. This parameter is applicable to the emergency service in North America and gives the routing key defined in TS 29.002.
30 2.2.59
Equipment ID The field is correspond to the ASN.1 field “equipmentId”. This field contains a local ID used to distinguish equipment of the same type, for example, the number of the conference circuit employed if multiple conference circuits are available.
35 2.2.60
Equipment Type The field is correspond to the ASN.1 field “equipmentType”.
ZTE Confidential Proprietary
Page 63 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field contains the type of common equipment employed, for example, conference circuit for the multi-party service.
2.2.61
Error Code The field is correspond to the ASN.1 field “errorCode”.
5 This field contains the reason for unsuccessful USSD operation.
2.2.62
Event Time Stamps The field is correspond to the ASN.1 field “seizureTime/ answerTime/ releaseTime/originationTime/deliveryTime/eventTime/ ssActionTime”.
10 These fields contain possible time stamps in a CDR. In a CDR, there are two important call processing time stamps: Time when a call is answered or the charging starts (answer time) Time at which a call is released (release time)
15
20
For mobile originated calls, the answer time is the time when the CONNECT message is sent to the calling party. For mobile terminated calls, the answer time refers to the time when the CONNECT message is received from the called party. However, if the subscriber has subscribed to the AoC service, the answer time is derived from the time at which the FACILITY message containing AoC parameters is received from the MS. If the AoC parameters are changed during a call, the time stamp for change of AoC charging level records the time when the MS received the FACILITY message. For a subscriber with AOC information level, the recorded change time is the time at which the FACILITY message is sent to the MS. In case of call re-establishment, the answer time is the time at which a new traffic channel is allocated by the MSC, that is, when the ASSIGN COMMAND is sent to the MS.
25
The Release time is the time at which a connection is released by either one party, that is, a DISCONNECT or RELEASE message is sent by the network or a DISCONNECT message is received from the MS. In the case of link failure, the release time is the time at which the MSC detects the failure.
30
For successful calls, the answer time is mandatory, and the release time is optional. The recorded call duration is the chargeable duration, that is, the difference between the answer stamp and release time stamp. The event records include the following time stamps:
35
HLR-int time: receipt of a MAP_SEND_ROUTING_INFO request from the HLR Loc.Upd. time: receipt of a MAP_UPDATE_LOCATION_AREA request from the HLR or a MAP_UPDATE_LOCATION request from the HLR
40
SS-Action: receipt of a supplementary service request from the VLR, for example, MAP_REGISTER_SS, MAP_INVOKE_SS SMS-MO: receipt of an RP_DATA message from the MS containing an SMS_SUBMIT data unit SMS-MT: an RP_DATA message containing the SMS_DELIVER data unit sent to the MS
ZTE Confidential Proprietary
Page 64 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Note that the events listed above are used to demonstrate the principles only. A time stamp shall contain date, hour, minute, and second at least.
2.2.63
Exchange Identity The field is correspond to the ASN.1 field “exchangeIdentity”.
5 Identity of the MSC that generates original bills.
2.2.64
Fixed Network User Rate The field is correspond to the ASN.1 field “fnur”.
10
This field indicates the user data rate applied for the connection in the fixed network. In the UMTS, it is provided for all bearer services as specified in TS 22.002. In the GSM system, this parameter is part of the HSCSD connection parameters.
2.2.65 15
Free Format Data The field is correspond to the ASN.1 field “freeFormatData/freeFormatData-2”. This field contains charging information sent by the gsmSCF in an FCI message as defined in 3GPP TS 29.078. The data can be transmitted in one FCI message or several FCI messages containing the append indicator. The free format data is transmitted transparently to the charge CDRs and recorded. In the first call leg, the data is recorded in the major CDRs. In other legs, the data is recorded in corresponding sub-CDR.
20
If the FCI is received more than once during an ongoing incoming/outgoing CAMEL call leg, the append indicator defines whether the FCI information is appended to previous FCI and stored in the relevant record or the information of the last FCI received is stored in the relevant record (the previous FCI information shall be overwritten).
25
In the case of partial output, the currently valid “free format data” is stored in the partial record.
302.2.66
Forward Call Indicator The field is correspond to the ASN.1 field “forwardCallIndicator” This field is only provided in the incoming gateway record,it is used to identify the type of the originating party of the call. e.g. international or national
352.2.67
Forwarded To IMSI The field is correspond to the ASN.1 field “fordwardedToIMSI”. This field indicats IMSI of the forwarded to party.
2.2.68 40
Forwarded To Number The field is correspond to the ASN.1 field “forwardedToNumber”.
ZTE Confidential Proprietary
Page 65 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field indicates the call forwarding number C.
2.2.69
Forward Type The field is correspond to the ASN.1 field “mcfType”.
5
This field records the type of forwarding, e.g forward on busy, forward on unconditional. Note: Forward type 254 is used to identify the call back leg triggered by the overlay method. It is configurable whether to generate the call back forwarding CDR. The value 254 is only used in France OMT project.
10 2.2.70
Forwarded Sub. Number The field is correspond to the ASN.1 field “forwardedSubNumber”. This field indicates the forwarded sub-address. It is used with the forwarded-to number.
15
A sub-address is used to identify subscriber terminals connected through the ISDN network interface. A sub-address is transmitted transparently in the network, and it is checked and verified through user terminals.
2.2.71 20
Free Format Data Append Indicator The field is correspond freeFormatDataAppend-2”.
to
the
ASN.1
field
“freeFormatDataAppend/
This field indicates whether free format data is to be appended to the free format data stored in the previous partial CDR. This field is used to sort out valid free format data from CDRs during CDR post-processing. Partial records are independent of received FCIs. Thus, valid free format data may be divided into different partial records.
25
If field does not exist, the free format data in a CDR will overwrite all the free format data received in the previous CDRs. The append indicator is not required in the first CDR. In the following partial CDR indicators, a real value shall be assigned to the partial CDR that receives an append indicator with the FCI during output of the CDR. If one or more FCIs without append indicator are received from a call leg during output of the CDR, this field does not exist.
30
2.2.72 35
Gateway Record Type The field is correspond to the ASN.1 field “gatewayRecordType” This field indicates the type of the trunk. e.g.gateway,trunk
2.2.73
Global Call Reference The field is correspond to the ASN.1 field “globalCallReference”.
40 The Global Call Reference idenfifies a call uniquely within a network and across network. The GCR is enables to link, correlate and trace charging records related to a call that is processed in several nodes in one or more networks.
ZTE Confidential Proprietary
Page 66 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.74
GsmSCF Address The field is correspond to the ASN.1 field “gsmSCFAddress/ gsmSCFAddress_2”. This field indicates the address of CAMEL service controller serving subscribers. The address is defined in the HLR as a part of CAMEL subscriber information.
5 2.2.75
Guaranteed Bit Rate The field is correspond to the ASN.1 field “guaranteedBitRate”. This field contains the guaranteed bit rate of transparent CS data services described in TS 27.001 and the requested AIUR from non-transparent CS data services. The guaranteed bit rate can be used in the UMTS to help control the rate and allocate resources based on available resources. Referring to TS 22.002, UMTS bearer services provide the guaranteed bit rate for subscribers or applications.
10
Operators can choose to provide a value that is smaller than or equal to the WAIUR.
15
Note if the WAIUR is smaller than or equal to 14.4 kbit/s, the guaranteed bit rate and the maximum bit rate shall be set to 14.4 kbit/s.
2.2.76
Hot Billing Tag The field is correspond to the ASN.1 field “hotBillingTag”.
20
This field indicates the hot billing tag defined by operators. The value “1” indicates the hot billing service, and the value “0” indicates non-hot billing service.
2.2.77
Hot Billing Tag 2 The field is correspond to the ASN.1 field “hotBillingTag2”.
25
This filed indicates hot billing tag 2 defined by operators. It distinguishes the prepaid service and post-paid service subscribers. The value “1” indicates pre-paid subscribers, and the value “0” indicates post-paid subscribers.
2.2.78
HSCSD Parameters/Change of HSCSD Parameters The field is correspond to the ASN.1 field “ hSCSDChanRequested/ hSCSDChanAllocated/ changeOfHSCSDParms/ fnur/ aiurRequested/ chanCodingsAcceptable/ chanCodingUsed”.
30
The basic HSCSD parameters are negotiated between the MS and the network during call setup. The parameters consist of the following:
35
Fixed network user rate (FNUR) (optional) Total AIUR requested by the MS (for non-transparent HSCSD connections only) Channel No. list accepted by MS
40
Maximum number of voice channels accepted by MS (indicated in the channels requested field) Channel No. and number of voice channels actually used for a call
ZTE Confidential Proprietary
Page 67 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
In case that the network or a subscriber initiates the update procedure during a call, the requested AIUR, the applied channel No. and the number of voice channels requested or applied shall be recorded in the Change of HSCSD Parameters field together with the time when the change takes place and the entity requested to be changed.
5
It should be noted that the Change of HSCSD Parameters field is optional and not required if partial records are generated when a change of HSCSD parameters takes place.
2.2.79 10
Incoming/Outgoing Cic The field is correspond to the ASN.1 field “incomingCic/outgoingCic” This field indicates the cic value of the incoming/outgoing trunk.
2.2.80
Incoming/Outgoing TKGP The field is correspond “mscIncomingTKGP/mscOutgoingTKGP”.
15
to
the
ASN.1
field
An incoming trunk group indicates the trunks through which calls are originated at the MSC. It is a BSS trunk for mobile originated calls. Similarly, the outgoing trunk group indicates trunks used for outgoing calls.
202.2.81
Incoming/Outgoing TKGP Name The field is correspond to “incomingTKGPName/outgoingTKGPName”
the
ASN.1
field
ASN.1
field
This field indicates the incoming/outgoing trunk group name.
252.2.82
Incoming/OutgoingTraffic Type The field is correspond “incomingTrafficType/outgoingTrafficType”
to
the
This field indicates the call is incomming from (or outgoing to) local network mobile section or local network fixed section or external network.
30 2.2.83
InitialCalledNumber The field is correspond to the ASN.1 field “initialCalledNumber”.
35
This field indicates the original called number in the trunk line. In mobile originated call, it indicates the dialed number.
2.2.84
Inter Operator Identifiers The field is correspond to the ASN.1 field “interOperatorIdentifiers”.
40
Holds a list of the Called party address(es), if the address(es) are determined by an AS (SIP URL, E.164…)
ZTE Confidential Proprietary
Page 68 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.85
Interrogation Result The field is correspond to the ASN.1 field “interrogationResult”. This field contains the result of the HLR interrogation attempt defined in the MAP (TS 29.002).
5
Note: This field is present only when the attempted interrogation fails.
2.2.86
Is CAMEL Call The field is correspond to the ASN.1 field “isCAMELCall”.
10
The field indicates that the CAMEL service is applied in the call.
2.2.87
Is CUG Used The field is correspond to the ASN.1 field “isCUGUsed”. The field indicates that the CUG service is applied in the call.
152.2.88
Is MultiMedia Call The field is correspond to the ASN.1 field “isMultiMediaCall”. This field indicates that the call is a CS multimedia call in the case of multimedia service based on data bearer in the CS
202.2.89
Is HSCSD Used The field is correspond to the ASN.1 field “isHSCSDUsed”. The field indicates that the HSCSD service is applied in the call.
2.2.90 25
Iu Release Cause The field is correspond to the ASN.1 field “iuReleaseCause”. When established MO or MT call is released because of Iu connetion failure, this filed shows the RANAP cause for the failure. The Iu interface cause is defined in detail in 3GPP TS 25.413.
302.2.91
Last Long Part Indicator The field is correspond to the ASN.1 field “lastLongPartInd”. It indicates that the CDR is the last part CDR.
2.2.92 35
LCS Cause The field is correspond to the ASN.1 field “lcsCause”. This parameter provides causes for an unsuccessful location request based on TS 49.031.
ZTE Confidential Proprietary
Page 69 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.93
LCS Client Identity The field is correspond to the ASN.1 field “lcsClientIdentity”. This field contains further information of LCS Client identity:
5
Client external ID Client ID dialed by MS Client internal ID
2.2.94
LCS Client Type The field is correspond to the ASN.1 field “lcsClientType”.
10 This field contains the type of the LCS Client defined in TS 29.002.
2.2.95
LCS Priority The field is correspond to the ASN.1 field “lcsPriority”.
15
This field gives the priority of location requests defined in TS 49.031.
2.2.96
LCS QoS The field is correspond to the ASN.1 field “lcsQos”. This field gives the QoS of location requests defined in TS 49.031.
202.2.97
Level of CAMEL Service The field is correspond to the ASN.1 field “levelOfCAMELService”. This field briefly describes the complexity of CAMEL invocation. “Basic” indicates that CAMEL function is invoked during call setup only, for example, change of destination.
25
“Online charging” indicates that CAMEL supported AoC parameter are sent to the MS (the Send Charging Information message is received from the gsmSCF). The “call duration management” flag is set if the call duration management is applied in the gsmSSF of the VPLMN (when the application charging message is received from the gsmSCF).
30 2.2.98
LocalOfficeForward The field is correspond to the ASN.1 field “localOfficeForward”.
35
This field indicates the call is forwarded by local office or not.
2.2.99
Location/Change of Location The field is correspond to the ASN.1 field “location/changeOfLocation”.
ZTE Confidential Proprietary
Page 70 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The location field contains the combination of the LAC and CI of the location in which the served party is currently located. Any change of location shall be recorded in the change of location field, including the time at which the change takes place.
5
The change of location field is optional, and it is not required if partial records are generated when the location changes. The change of location field can record thirty groups location at most. The LAC and CI are 2-byte numbers and coded according to 3GPP TS24.008. For SMS over SGs (defined in 3GPP TS 36.413 [95]), the LAC field contains the Tracking Area Code and the Cell Identity contains the 16 least significant bits.
10 2.2.100
Location Estimate The field is correspond to the ASN.1 field “locationEstimate”. The Location Estimate field provides estimate for the geographic location of a target MS according to TS29.002.
15 2.2.101
Location Extension The field is correspond to the ASN.1 field “locationExtension”. The Location Externsion field contains the 12 most significant bits from the Cell Identity field. This is used when SMS over SGs (defined in 3GPP TS 36.413 [95]) is applied and the access is E-UTRAN.
20 2.2.102
Location Type The field is correspond to the ASN.1 field “lcsClientType”.
25
This field contains the types of location defined in TS 29.002.
2.2.103
Maximum Bit Rate The field is correspond to the ASN.1 field “maximumBitRate”. This field contains the maximum bit rate based on the FNUR in transparent data services and WAIUR in non-transparent data services based on the description in 3GPPTS27.001. This parameter can be used to reserve codes on the downlink interface of UMTS bearer services (BS20 and BS30). Refer to 3GPP TS22.002. It has the following functions:
30
3) Restrict the bit rate provided for applications or external networks according to the value of this parameter. 4) Allow applications (for example, applications with adaptive codec) working at different rates to provide different maximum wanted user bit rates.
35
The value of maximum bit rate is smaller than or equal to the WAIUR (if the WAIUR is less or equal to 14.4 kbit/s, the guaranteed bit rate and maximum bit rate shall be set to 14.4 kbit/s).
40 2.2.104
Measure Duration The field is correspond to the ASN.1 field “measureDuration”.
ZTE Confidential Proprietary
Page 71 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field contains the location measurement duration of the response to location requests and the location report messages.
2.2.105 5
Message Reference The field is correspond to the ASN.1 field “messageReference”. This field contains a unique message reference number allocated by the MS when sending a short message to the SMSC. This field corresponds to the TP-MessageReference element of the SMS_SUBMIT PDU defined in 3GPP TS 23.040.
102.2.106
Millisecond Duration The field is correspond to the ASN.1 field “millisecDuration”. This field indicates the duration of unit millisecond to record the millisecond interval between release time and answer time.
152.2.107
MLC Number The field is correspond to the ASN.1 field “mlc-Number”. This parameter indicates the ISDN (E.164) number of an MLC.
2.2.108 20
MNPNumber The field is correspond to the ASN.1 field “mNPNumber”. This field indicates the Mobile Portable Number obtained from HLR when using MNP service.
2.2.109 25
MNP Roaming Number The field is correspond to the ASN.1 field “mNPRoutingNumber”. This field is provided when the called or forwarded-to party used MNP service.
2.2.110
Mobile station Classmark/Change of Classmark The field is correspond to the ASN.1 field “msClassmark/changeOfClassmark”.
30 This field contains the mobile station classmark employed by the served MS on call setup as defined in 3GPP TS24.008. Any change in the classmark during connection shall be recorded together with the time when the change takes place in the change of classmark field.
35
The change of classmark field is optional and is not required if partial records are generated when the classmark is changed.
2.2.111
MOLR Type The field is correspond to the ASN.1 field “molr-Type”.
ZTE Confidential Proprietary
Page 72 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The field uses the type of invoked mobile originated location requests defined in TS 24.080.
2.2.112
MSC Address The field is correspond to the ASN.1 field “mSCAddress”.
5 This field contains the ITU-T E.164 number assigned to the MSC that generate records. For details concerning numbers of the MSC, see TS23.003.
2.2.113
Msc SPC14 The field is correspond to the ASN.1 field “mscSPC14”.
10
This field is the spc14 code of the serving MSC
2.2.114
Msc SPC24 The field is correspond to the ASN.1 field “mscSPC24”. This field is the spc24 code of the serving MSC
152.2.115
MSC Server Indication The field is correspond to the ASN.1 field “mscServerIndication”. This field contains an indicator whether the CAMEL subscriber information is active. The parameter is present for the VT-CSI in the VMSC and not present for the T-CSI in the GMSC. This indication can be used to check whether CDRs in T-CSI of the GMSC and VT-CSI of the VMSC are correct.
20 2.2.116
Network Call Reference The field is correspond to the ASN.1 field “networkCallReference”.
25
This field is used to correlate the call records generated on the originating MSC (if applicable), GMSC, and terminating MSC, and network optional call records on the gsmSCF if the CAMEL service is applied.
2.2.117
No Reply CondTime The field is correspond to the ASN.1 field “noReplyCondTime”.
30 When a mobile subscriber requests for the forwarding service, the field indicates the time for call forwarding no reply. The value of this parameter is in the range of 0 to 30s.
2.2.118 35
Notification to MS user The field is correspond to the ASN.1 field “notificationToMSUser”. This field contains the private notification to mobile subscribers when a location request is originated, as defined in TS 29.002.
ZTE Confidential Proprietary
Page 73 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.119
Num of Concatenated SMS The field is correspond to the ASN.1 field “numOfConcatenated”. This field indicates the maximum number of short messages in the concatenated short message. In case of non-concatenated short message, the field value is '01'.
5 2.2.120
Number of DP Encountered The field is correspond to the ASN.1 field “numberOfDPEncountered”. This field records service triggering points and event detection points detected in the CAMEL service.
10 2.2.121
Number of Forwarding The field is correspond to the ASN.1 field “numberOfForwarding”. This field contains the number of forwarding times of a call before HLR interrogation if ISUP signaling message can be provided, as defined in 3GPP TS29.002.
15 2.2.122
Old/New Location The field is correspond to the ASN.1 field “location/changeOfLocation”.
20
These fields contain the locations of a mobile subscriber before and after a location update. In the case of VLR location update, the location information consists of a VMSC number and a location area code. In the case of HLR location update, the fields contain the VMSC number and VLR number.
2.2.123 25
OPC The field is correspond to the ASN.1 field “oPC”. This field contains the SPC code of the originating node that will be billed or validated.
2.2.124 30
Operator ID The field is correspond to the ASN.1 field “operatorId”. This field indicates the operator id, provided in Multi-Operator Core Network.
2.2.125
Original Called Number The field is correspond to the ASN.1 field “originalCalledNumber”
35 The original called number.It is the B number in the terminating record of C. In multi-call forwarding circumstance, it is the B number in the call forwarding call record of C.
ZTE Confidential Proprietary
Page 74 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.126
Origination Number The field is correspond to the ASN.1 field “originationNumber”. This field records the number of the party sending short messages.
52.2.127
Original Called Number Before SDC Interrogation The field is correspond to the ASN.1 field “oriCalledNumberBeforeSDC”. The field is Original Called Number before SDC interrogation.
2.2.128 10
Partial Record Type The field is correspond to the ASN.1 field “partialRecordType”. This field indicates the event that caused the generation of a partial record.
2.2.129
Personal Back Ring Tone Indicator (PBRT) The field is correspond to the ASN.1 field “pbrt”.
15 This field indicates whether the personal back ring tone service is applied in the call.
2.2.130
Positioning Data The field is correspond to the ASN.1 field “positioningData”.
20
This information unit is used to provide positioning data associated with successful or unsuccessful positioning attempts for a target MS according to TS 49.031.
2.2.131
Privacy Override The field is correspond to the ASN.1 field “privacyOverride”.
25
This parameter indicates whether the MS privacy is overridden by the LCS client when the GMLC and VMSC/SGSN for an mobile terminated request are in the same country, as defined in TS 29.002.
2.2.132 30
Radio Channel Requested/Radio Channel Used/Change of Radio Channel/Speech Version Supported/Speech Version Used The field is correspond to the ASN.1 field “radioChanRequested/radioChanUsed/changeOfRadioChan/speechVersionSupporte d/ speechVersionUsed”. The radio channel requested field contains the types of channel requested by subscribers. It can be set to one of the following values:
35
Full rate Half rate Dual-mode half rate preferred Dual-mode full rate preferred
ZTE Confidential Proprietary
Page 75 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The radio channel used field indicates the types of traffic channel actually used for connections, that is, the full rate (Bm) or half rate (Lm) as described in GSM 05.01.
5
Any change in the type of channel used shall be recorded in the change of radio channel used field, including the time when the change happens and the speech version used after the change of radio channel.
10
The speech version supported field contains the speech version supported by the MS with the highest priority. The speech version used field contains the version of the speech code allocated for a call. The code is based on the speech version indicator in GSM08.08 and the eighth extension location is 0. Note that the change of radio channel field is optional and is not required when some records are generated.
2.2.133
Rate Indication The field is correspond to the ASN.1 field “rateIndication”.
15 This parameter gives the rate adaptation used in connections. The field is constructed based on the signaling parameters "rate adaptation" and "other rate adaptation" between the MS/UE and the network. See TS 24.008. The format of this field is a byte in the following formats:
20
Bits 0-1: the rate adaptation field, as defined in TS 24.008 Bits 2-3: the other rate adaptation field, as defined in TS 24.008 Bits 4-7: not used
2.2.134
Reason for Service Change The field is correspond to the ASN.1 field “reasonForServiceChange”.
25 This field contains the type of service change requested by the subscriber or performed by the network. Possible values include: - subscriber initiated; - network initated;
30
- call setup fallback; - call setup change order.
2.2.135
Record Extensions The field is correspond to the ASN.1 field “recordExtensions”.
35
This field reserved for network operators or suppliers to add their extension flags to standards CDRs.
2.2.136
Record Sequence Number The field is correspond to the ASN.1 field “recordSequenceNumber”.
40
The field contains one consecutive positive integer, serving as the unique ID of each CDR.
ZTE Confidential Proprietary
Page 76 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.137
Record Type The field is correspond to the ASN.1 field “recordType”. The field indicates the type of CDR, for example, mobile originated CDR, mobile terminated CDR and forwarding CDR.
5 2.2.138
Recording Entity The field is correspond to the ASN.1 field “recordingEntity”. This field contains the ITU-T E.164 number assigned to the recording entity such as MSC, VLR and HLR that generate records. For details concerning the MSC and location registration numbers, see 3GPP TS23.003.
10 2.2.139
Redirect Number The field is correspond to the ASN.1 field “redirectNumber”.
15
The field contains the mobile subscriber redirect numbers defined in 3GPP TS23.003 and coded according to 3GPP TS29.002.
2.2.140
Redirecting Number The field is correspond to the ASN.1 field “redirectingNumber”.
20
This field indicates the number of subscriber B upon call forwarding. This parameter is present in call forwarding only.
2.2.141
Retransmission The field is correspond to the ASN.1 field “retransmission”.
25
This parameter, when present, indicates that information from retransmitted Charging Data Requests has been used in this CDR.
2.2.142
Roaming Number The field is correspond to the ASN.1 field “roamingNumber”.
30
The roaming numbers in MOC CDRs contain mobile roaming numbers defined in 3GPP TS23.003 and coded according to 3GPP TS29.002.
2.2.143
Routing Category The field is correspond to the ASN.1 field “routingCategory”.
35
This field indicates the routing category of the call.
2.2.144
Routing Number The field is correspond to the ASN.1 field “routingNumber”.
ZTE Confidential Proprietary
Page 77 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The routing number field in HLR interrogation records contains a mobile station roaming number or a forwarded-to number in the case of call forwarding.
2.2.145
SDC Interrogated Calling Number The field is correspond to the ASN.1 field “sdcInterrogatedCallingNumber”.
5 The field is Calling Number before SDC interrogation.
2.2.146
SDC Interrogation Flag The field is correspond to the ASN.1 field “sdcInterrogationFlag”.
10
The field indicates that the SDC(Subscriber Data Center) interrogation is applied
2.2.147
SDC Interrogated Original Called Number The field is correspond to the ASN.1 field “sdcInterrogatedOriCalledNumber”. The field is Original Called Number which is interrogated from SDC.
152.2.148
Sequence Number The field is correspond to the ASN.1 field “sequenceNumber”. This field contains a dynamic sequence number used to connect the partial records generated for a specified call. For the first partial record of the call, the sequence number is 1.
20 2.2.149
Served IMEI The field is correspond to the ASN.1 field “servedIMEI”. This field contains the IMEI of the served user. The user refers to the record mobile equipment related to calls, for example, called mobile equipment in MTC records.
25
The structure of the IMEI is defined in 3GPP TS2 3.003.
2.2.150
Served IMSI The field is correspond to the ASN.1 field “servedIMSI”.
30
This field contains the IMSI of the served party. The served party refers to a recorded mobile subscriber related to calls, for example, the called subscriber in MTC records. The structure of the IMSI is defined in 3GPP TS23.003.
2.2.151 35
Served MSISDN The field is correspond to the ASN.1 field “servedMSISDN”. This field contains the MSISDN of the server party. The served party refers to a recorded mobile subscriber related to calls, for example, the called subscriber in MTC records. In the case of multi-numbering, for example, one card with two
ZTE Confidential Proprietary
Page 78 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
numbers, the MSISDN stored in an MOC record is the primary MSISDN of the calling party. The structure of the MSISDN is defined in 3GPP TS23.003.
2.2.152 5
Service Category The field is correspond to the ASN.1 field “serviceCategory” This field indicates the service category of the call.
2.2.153
Service Centre Address The field is correspond to the ASN.1 field “serviceCentre”.
10 This field contains the service centre identified through an ITU-T E.164 number, for example, short message service centre. See 3GPP TS23.040.
2.2.154
Service Change Initiator The field is correspond to the ASN.1 field “serviceChangeInitiator”.
15 This field indicates that the owner of this CDR is the initiator of the service change.
2.2.155
Service Identifier The field is conrrespond to the ASN.1 field “serviceIdentifier”
20
The field contains the SI of the MTP3 signnaling messages.
2.2.156
Service Key The field is correspond to the ASN.1 field “serviceKey”. This field determines the applied CAMEL service. The service key is defined in the HLR as a part of CAMEL subscription information.
25 2.2.157
Short Message Service Result The field is correspond to the ASN.1 field “smsResult”. This field contains the result of an attempt to deliver a short message to a service centre or a mobile subscriber (see TS 29.002).
30
Note: This field is provided when the attempted delivery is unsuccessful.
2.2.158
SMS Length The field is correspond to the ASN.1 field “sMSLength”
35
This field indicates the short message length.
2.2.159
SPC The field is correspond to the ASN.1 field “sPC”
ZTE Confidential Proprietary
Page 79 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field contains the SPC code of the STP node that generated the record.
2.2.160
Speech Version Supported/Speech Version Used The field is correspond to “speechVersionSupported/speechVersionUsed”.
5
the
ASN.1
field
The speech version supported field contains the speech version of the highest priority supported by the MS. The speech version used field contains the version of the speech code allocated for a call. The code is the speech version indicator in GSM 08.08 with the extension bit (eighth bit) set to “0”.
10
Note that the change of radio channel field is optional and not required if partial records are generated.
2.2.161
Start Time The field is correspond to the ASN.1 field “startTime”.
15 If the record is a subseqent partial record,the startTime equals the answerTime of first partial record; otherwise the startTime equals the answerTime of current record.
2.2.162
System Type The field is correspond to the ASN.1 field “systemType”.
20 Indicate that a call happens in the 3G-UMTS or GSM system.
2.2.163
SSN The field is correspond to the ASN.1 field “sSN”.
25
This field contains the SSN of the SCCP messages
2.2.164
Subscriber Category The field is correspond to the ASN.1 field “subscriberCategory”. Subscriber category, also called subscriber identification, indicates properties of mobile subscribes registered in the HLR. See ITU-T Q763 and NO.7 ISUP.
30 2.2.165
Supplementary Service(s) The field is correspond to the ASN.1 field “supplService/supplServicesUsed”. The supplementary service field in supplementary service records contains the codes of supplementary services.
35
The supplementary services field in the MOC or MTC records contains the codes of supplementary services invoked as a result of call connections. The codes of supplementary services are described in 3GPP TS29.002 in detail.
ZTE Confidential Proprietary
Page 80 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.166
Supplementary Service Action The field is correspond to the ASN.1 field “ssAction”. This field contains supplementary service actions requested by subscribers or performed by the network. The value of this field can be following:
5
Registration Erasure Activation Deactivation
10
Query Invocation For more details, see 3GPP TS 22.004.
2.2.167
Supplementary Service Action Result The field is correspond to the ASN.1 field “ssActionResult”.
15
This field contains the result of an attempted supplementary service action (see TS 29.002). Note that this field is present only when part of a supplementary service action fails.
2.2.168 20
Supplementary Service Parameters The field is correspond to the ASN.1 field “ssParameters”. This field contains parameters related to a requested supplementary service action. For more details of the related parameters, see GSM 02.8X series of documents.
2.2.169 25
Suppress CAMEL Indicator The field is correspond to the ASN.1 field “suppressCAMELInd”. This field indicates the CAMEL service is suppressed by MSC/VLR. If CAMEL service is suppressed this field is available otherwise it is not available.
2.2.170 30
Terminating Record Type The field is correspond to the ASN.1 field “terminatingRecordType” This field indicates the type of the terminating record.
2.2.171
Term CAMEL Call Type The field is correspond to the ASN.1 field “termCAMELCallType”
35 This field indicates the type of the terminating record.
2.2.172
TP Message Type Indicator The field is correspond to the ASN.1 field “tPMessageTypeIndicator”
ZTE Confidential Proprietary
Page 81 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
This field indicates the TP Message Type Indicator, See 3GPP TS 23.040.
2.2.173
Transaction Identification The field is correspond to the ASN.1 field “transactionIdentification”
5 This field is provided when the user has more than one ongoing calls at the same time.It is used to identify different ongoing calls.
2.2.174
Transparency Indicator The field is correspond to the ASN.1 field “transparencyIndicator”.
10 This field indicates basic services are applied in the transparent mode or nontransparent mode. Note that this field is only related to the services that can operate in both the transparent mode and non-transparent mode.
2.2.175 15
Trunk Line The field is correspond to the ASN.1 field “trunkLine” This field indicate the trunk line type.
2.2.176
Type of service change The field is correspond to the ASN.1 field “typeOfServiceChange”
20 Indicates the type of service change. Provided if SCUDIF service is used. Possible values include to speech to multimedia
252.2.177
Unstructured SS Data The field is correspond to the ASN.1 field “uSSDUnstructuredData”. The SS Data exchanged between the mobile and network.
2.2.178 30
USSD interaction count The field is correspond to the ASN.1 field “uSSDInteractionCount”. The USSD interaction count.
2.2.179
Ussd data coding scheme The field is correspond to the ASN.1 field “uSSDDataCodingScheme”.
35 The coding scheme of USSD data.
ZTE Confidential Proprietary
Page 82 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
2.2.180
USSD operation code The field is correspond to the ASN.1 field “uSSDOpreationCode”. The operation code of USSD.
52.2.181
USSD Service Code The field is correspond to the ASN.1 field “uSSDServiceCode”. The service code of USSD operation.
2.2.182 10
VIG Call Type The field is correspond to the ASN.1 field “vigCallType”. The direction of a call, which is defined as “incoming” or “outgoing”.
2.2.183
WANAPPS The field is correspond to the ASN.1 field “wANAPPS”.
15 This field indicates that the calling or call forwarding party is WANA Prepaid subscriber.
3
ASN.1 DEFINITIONS FOR CDRS
3.1
CDR Structure
203.1.1
CallEventRecord CallEventRecord ::= CHOICE {
25
30
35
40
moCallRecord mtCallRecord roamRecord incGatewayRecord outGatewayRecord transitRecord moSMSRecord mtSMSRecord ssActionRecord hlrIntRecord moeCallRecord mcfCallRecord commonEquipRecord termCAMELIntRecord mtLCSRecord moLCSRecord niLCSRecord moCPHRecord mcfCPHRecord tciCPHRecord gsiCPHRecord ncsCPHRecord
ZTE Confidential Proprietary
[0] MOCallRecord, [1] MTCallRecord, [2] ROAMRecord, [3] IncGatewayRecord, [4] OutGatewayRecord, [5] TransitRecord, [6] MOSMSRecord, [7] MTSMSRecord, [10] SSActionRecord, [11] HLRIntRecord, [12] MOECallRecord, [13] MCFCallRecord, [14] CommonEquipRecord, [16] TermCAMELIntRecord, [17] MTLCSRecord, [18] MOLCSRecord, [19] NILCSRecord, [40]MOCPHRecord, [41]MCFCPHRecord, [42]TCICPHRecord, [43]GSICPHRecord, [44]NCSCPHRecord,
Page 83 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 sigMTPStatisticRecord sigSCCPStatisticRecord uSSDRecord vIGRecord 5
3.1.2
10
15
20
25
30
35
40
45
50
55
60
65
[100] SigMTPStatisticRecord, [101] SigSCCPStatisticRecord, [102] USSDRecord, [103] VIGRecord
}
MOCallRecord MOCallRecord ::= SET { recordType servedIMSI servedIMEI servedMSISDN calledNumber translatedNumber connectedNumber roamingNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP location changeOfLocation basicService transparencyIndicator changeOfService supplServicesUsed aocParameters changeOfAOCParms msClassmark changeOfClassmark seizureTime answerTime releaseTime callDuration dataVolume radioChanRequested radioChanUsed changeOfRadioChan causeForTerm diagnostics callReference sequenceNumber lastLongPartInd additionalChgInfo recordExtensions isCAMELCall gsm-SCFAddress serviceKey networkCallReference mSCAddress defaultCallHandling isHSCSDUsed hSCSDChanRequested hSCSDChanAllocated changeOfHSCSDParms fnur aiurRequested chanCodingsAcceptable chanCodingUsed speechVersionSupported speechVersionUsed numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation freeFormatDataAppend
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] IMSI , [2] IMEI OPTIONAL, [3] MSISDN, [4] CalledNumber OPTIONAL, [5] TranslatedNumber OPTIONAL, [6] ConnectedNumber OPTIONAL, [7] RoamingNumber OPTIONAL, [8] RecordingEntity, [9] TrunkGroup OPTIONAL, [10] TrunkGroup OPTIONAL, [11] LocationAreaAndCell , [12] SEQUENCE OF LocationChange OPTIONAL, [13] BasicServiceCode , [14] TransparencyInd OPTIONAL, [15] SEQUENCE OF ChangeOfService OPTIONAL, [16] SEQUENCE OF SuppServiceUsed OPTIONAL, [17] AOCParameters OPTIONAL, [18] SEQUENCE OF AOCParmChange OPTIONAL, [19] Classmark, [20] SEQUENCE OF ChangeOfClassmark OPTIONAL, [21] TimeStamp OPTIONAL, [22] TimeStamp OPTIONAL, [23] TimeStamp OPTIONAL, [24] CallDuration, [25] DataVolume OPTIONAL, [26] RadioChanRequested OPTIONAL, [27] TrafficChannel OPTIONAL, [28] ChangeOfRadioChannel OPTIONAL, [29] CauseForTerm, [30] Diagnostics OPTIONAL, [31] CallReference, [32] LongPartSeqNumber OPTIONAL, [33] NULL OPTIONAL, [34] AdditionalChgInfo OPTIONAL, [35] ManagementExtensions OPTIONAL, [36] NULL OPTIONAL, [37] Gsm-SCFAddress OPTIONAL, [38] ServiceKey OPTIONAL, [39] NetworkCallReference OPTIONAL, [40] MSCAddress OPTIONAL, [41] DefaultCallHandling OPTIONAL, [42] NULL OPTIONAL, [43] NumOfHSCSDChanRequested OPTIONAL, [44] NumOfHSCSDChanAllocated OPTIONAL, [45] SEQUENCE OF HSCSDParmsChange OPTIONAL, [46] Fnur OPTIONAL, [47] AiurRequested OPTIONAL, [48] SEQUENCE OF ChannelCoding OPTIONAL, [49] ChannelCoding OPTIONAL, [50] SpeechVersionIdentifier OPTIONAL, [51] SpeechVersionIdentifier OPTIONAL, [52] NumberOfDPEncountered OPTIONAL, [53] LevelOfCAMELService OPTIONAL, [54] FreeFormatData OPTIONAL, [55] SEQUENCE OF CAMELInformation OPTIONAL, [56] BOOLEAN OPTIONAL,
Page 84 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 defaultCallHandling_2 [57] DefaultCallHandling OPTIONAL, gsm-SCFAddress_2[58] Gsm-SCFAddress OPTIONAL, serviceKey_2 [59] ServiceKey OPTIONAL, freeFormatData_2 [60] FreeFormatData OPTIONAL, freeFormatDataAppend_2 [61] BOOLEAN OPTIONAL, systemType [62] SystemType, exchangeIdentity [63] IA5STRING OPTIONAL, dialledNumber [64] BCDDirectoryNumber OPTIONAL, subscriberCategory [65] SubscriberCategory OPTIONAL, recordSequenceNumber [66] RecordSeqNumber, eMLPPPriorityLevel [67] EMLPPPriorityLevel OPTIONAL, eMLPPRequestPriorityLevel [68] EMLPPRequestPriorityLevel OPTIONAL, hotBillingTag [69] HotBillingTag OPTIONAL, isCUGUsed [70] NULL OPTIONAL, cUGCategory [71] CUGCategory OPTIONAL, cUGInterLockCode [72] CUGInterLockCode OPTIONAL, dataRate [73] DataRate OPTIONAL, isMultiMediaCall [74] NULL OPTIONAL, rateIndication [75]RateIndication OPTIONAL, guaranteedBitRate [76] GuaranteedBitRate OPTIONAL, maximumBitRate [77] MaximumBitRate OPTIONAL, pbrt [78] Pbrt OPTIONAL, carp [79] Carp OPTIONAL, cUGIndex [80] CUGIndex OPTIONAL, cUGOutgoingAccessUsed [81] NULL OPTIONAL, cUGOutgoingAccessInd [82] NULL OPTIONAL, hotBillingTag2 [83] HotBillingTag2 OPTIONAL, dDCFlag [88] DDCFlag OPTIONAL, bSCIdentification [89] BSCIdentification OPTIONAL, calledLocation [90] LocationAreaAndCell OPTIONAL, callingPartyRoamingInd [91] BOOLEAN OPTIONAL, serviceCategory [92] ServiceCategory OPTIONAL, transactionIdentification [93] INTEGER OPTIONAL, incomingCic [94] CICCode OPTIONAL, outgoingCic [95] CICCode OPTIONAL, mscSPC14 [96] SPC14 OPTIONAL, mscSPC24 [97] SPC24 OPTIONAL, incomingTKGPName [98] TKGPName OPTIONAL, outgoingTKGPName [99] TKGPName OPTIONAL, partialRecordType [100] PartialRecordType OPTIONAL, serviceChangeInitiator [101] INTEGER OPTIONAL, reasonForServiceChange [102] ReasonForServiceChange OPTIONAL, typeOfServiceChange [103] TypeOfServiceChange OPTIONAL, bscIdentification24 [104] BSCIdentification24 OPTIONAL, globalCallReference [105] GlobalCallReference OPTIONAL, mNPNumber [106] BCDDirectoryNumber OPTIONAL, byPass [107] INTEGER OPTIONAL, wANAPPS [108] INTEGER OPTIONAL, mNPRoutingNumber [109] AddressString OPTIONAL, iuReleaseCause [110] IuReleaseCause OPTIONAL, aReleaseCause [111] AReleaseCause OPTIONAL,
5
10
15
20
25
30
35
40
45
50
55
calledIMSI
[112] IMSI OPTIONAL,
calledIMEI routingCategory millisecDuration outPulsedNumber
[113] IMEI OPTIONAL, [114] RoutingCategory OPTIONAL, [115] CallDuration OPTIONAL, [116] BCDDirectoryNumber OPTIONAL, [117] INTEGER OPTIONAL, [118] INTEGER OPTIONAL,
byPassFlag2 operatorId suppressCAMELInd
60
[138] BOOLEAN OPTIONAL
}
3.1.3
MTCallRecord MTCallRecord ::= SET {
ZTE Confidential Proprietary
Page 85 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
5
10
15
20
25
30
35
40
45
50
55
60
65
recordType servedIMSI servedIMEI servedMSISDN callingNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP location changeOfLocation OPTIONAL, basicService transparencyIndicator changeOfService OPTIONAL, supplServicesUsed OPTIONAL, aocParameters changeOfAOCParms msClassmark changeOfClassmark OPTIONAL, seizureTime answerTime releaseTime callDuration dataVolume radioChanRequested radioChanUsed changeOfRadioChan causeForTerm diagnostics callReference sequenceNumber lastLongPartInd additionalChgInfo recordExtensions isCAMELCall networkCallReference mSCAddress isHSCSDUsed hSCSDChanRequested hSCSDChanAllocated changeOfHSCSDParms OPTIONAL, fnur aiurRequested chanCodingsAcceptable OPTIONAL, chanCodingUsed speechVersionSupported speechVersionUsed gsm-SCFAddress serviceKey defaultCallHandling freeFormatData systemType exchangeIdentity redirectNumber subscriberCategory recordSequenceNumber connectedNumber hotBillingTag isCUGUsed cUGCategory cUGInterLockCode dataRate
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] IMSI , [2] IMEI OPTIONAL, [3] CalledNumber OPTIONAL, [4] CallingNumber OPTIONAL, [5] RecordingEntity, [6] TrunkGroup OPTIONAL, [7] TrunkGroup OPTIONAL, [8] LocationAreaAndCell OPTIONAL, [9] SEQUENCE OF LocationChange [10] BasicServiceCode , [11] TransparencyInd OPTIONAL, [12] SEQUENCE OF ChangeOfService [13] SEQUENCE OF SuppServiceUsed [14] AOCParameters OPTIONAL, [15] SEQUENCE OF AOCParmChange OPTIONAL, [16] Classmark OPTIONAL, [17] SEQUENCE OF ChangeOfClassmark [18] TimeStamp OPTIONAL, [19] TimeStamp OPTIONAL, [20] TimeStamp OPTIONAL, [21] CallDuration, [22] DataVolume OPTIONAL, [23] RadioChanRequested OPTIONAL, [24] TrafficChannel OPTIONAL, [25] ChangeOfRadioChannel OPTIONAL, [26] CauseForTerm, [27] Diagnostics OPTIONAL, [28] CallReference, [29] LongPartSeqNumber OPTIONAL, [30] NULL OPTIONAL, [31] AdditionalChgInfo OPTIONAL, [32] ManagementExtensions OPTIONAL, [33] NULL OPTIONAL, [34] NetworkCallReference OPTIONAL, [35] MSCAddress OPTIONAL, [36] NULL OPTIONAL, [37] NumOfHSCSDChanRequested OPTIONAL, [38] NumOfHSCSDChanAllocated OPTIONAL, [39] SEQUENCE OF HSCSDParmsChange [40] Fnur OPTIONAL, [41] AiurRequested OPTIONAL, [42] SEQUENCE OF ChannelCoding [43] ChannelCoding OPTIONAL, [44] SpeechVersionIdentifier OPTIONAL, [45] SpeechVersionIdentifier OPTIONAL, [46] Gsm-SCFAddress OPTIONAL, [47] ServiceKey OPTIONAL, [48] DefaultCallHandling OPTIONAL, [49] FreeFormatData OPTIONAL, [51] SystemType, [52] IA5STRING OPTIONAL, [53] BCDDirectoryNumber OPTIONAL, [54] SubscriberCategory OPTIONAL, [55] RecordSeqNumber , [56] BCDDirectoryNumber OPTIONAL, [57] HotBillingTag OPTIONAL, [58] NULL OPTIONAL, [59] CUGCategory OPTIONAL, [60] CUGInterLockCode OPTIONAL, [61] DataRate OPTIONAL,
Page 86 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 isMultiMediaCall [62] NULL OPTIONAL, rateIndication [63]RateIndication OPTIONAL, guaranteedBitRate [64] GuaranteedBitRate OPTIONAL, maximumBitRate [65] MaximumBitRate OPTIONAL, pbrt [66] Pbrt OPTIONAL, carp [67] Carp OPTIONAL, cUGIndex [68] CUGIndex OPTIONAL, cUGIncomingAccessUsed [69] NULL OPTIONAL, cUGIncomingAccessInd [70] NULL OPTIONAL, redirectingNumber [71] BCDDirectoryNumber OPTIONAL, hotBillingTag2 [72] HotBillingTag2 OPTIONAL, dDCFlag [77] DDCFlag OPTIONAL, terminatingRecordType [78] TerminatingRecordType OPTIONAL, originalCalledNumber [79] AddressString OPTIONAL, callingLocation [80] LocationAreaAndCell OPTIONAL, bSCIdentification [81] BSCIdentification OPTIONAL, calledPartyRoamingInd [82] BOOLEAN OPTIONAL, serviceCategory [83] ServiceCategory OPTIONAL, transactionIdentification [84] INTEGER OPTIONAL, incomingCic [85] CICCode OPTIONAL, outgoingCic [86] CICCode OPTIONAL, mscSPC14 [87] SPC14 OPTIONAL, mscSPC24 [88] SPC24 OPTIONAL, incomingTKGPName [89] TKGPName OPTIONAL, outgoingTKGPName [90] TKGPName OPTIONAL, partialRecordType [91] PartialRecordType OPTIONAL, serviceChangeInitiator [92] INTEGER OPTIONAL, reasonForServiceChange [93] ReasonForServiceChange OPTIONAL, typeOfServiceChange [94] TypeOfServiceChange OPTIONAL, bscIdentification24 [95] BSCIdentification24 OPTIONAL, globalCallReference [96] GlobalCallReference OPTIONAL, eMLPPPriorityLevel [97] EMLPPPriorityLevel OPTIONAL, eMLPPRequestPriorityLevel [98] EMLPPRequestPriorityLevel OPTIONAL, iuReleaseCause [99] IuReleaseCause OPTIONAL, aReleaseCause [100] AReleaseCause OPTIONAL, routingCategory [101] RoutingCategory OPTIONAL, millisecDuration [102] CallDuration OPTIONAL, operatorId [103] INTEGER OPTIONAL, incomingTrafficType [105] TrafficType OPTIONAL, outgoingTrafficType [106] TrafficType OPTIONAL, startTime [107] TimeStamp OPTIONAL
5
10
15
20
25
30
35
40
}
3.1.4
ROAMRecord ROAMRecord ::= SET
45
{
50
55
60
recordType servedIMSI servedMSISDN callingNumber roamingNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP basicService transparencyIndicator changeOfService -- NOT SUPPORT supplServicesUsed seizureTime answerTime releaseTime callDuration dataVolume
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] IMSI, [2] MSISDN OPTIONAL, [3] CallingNumber OPTIONAL, [4] RoamingNumber OPTIONAL, [5] RecordingEntity, [6] TrunkGroup OPTIONAL, [7] TrunkGroup OPTIONAL, [8] BasicServiceCode, [9] TransparencyInd OPTIONAL, [10] SEQUENCE OF ChangeOfService OPTIONAL, [11] SEQUENCE OF SuppServiceUsed OPTIONAL, [12] TimeStamp OPTIONAL, [13] TimeStamp OPTIONAL, [14] TimeStamp OPTIONAL, [15] CallDuration, [16] DataVolume OPTIONAL,
Page 87 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 causeForTerm diagnostics callReference sequenceNumber lastLongPartInd recordExtensions isCAMELCall networkCallReference mSCAddress exchangeIdentity recordSequenceNumber isCUGUsed cUGCategory cUGInterLockCode dataRate isMultiMediaCall hotBillingTag2 redirectNumber bSCIdentification serviceCategory incomingCic outgoingCic mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName transRoamingNumber bscIdentification24 globalCallReference routingCategory millisecDuration
5
10
15
20
25
30
operatorId roamCamelInfomation incomingTrafficType outgoingTrafficType startTime
35
[17] CauseForTerm, [18] Diagnostics OPTIONAL, [19] CallReference, [20] LongPartSeqNumber OPTIONAL, [21] NULL OPTIONAL, [22] ManagementExtensions OPTIONAL, [23] NULL OPTIONAL, [24] NetworkCallReference OPTIONAL, [25] MSCAddress OPTIONAL, [26] IA5STRING OPTIONAL, [27] RecordSeqNumber , [28] NULL OPTIONAL, [29] CUGCategory OPTIONAL, [30] CUGInterLockCode OPTIONAL, [31] DataRate OPTIONAL, [32] NULL OPTIONAL, [33] HotBillingTag2 OPTIONAL, [34] BCDDirectoryNumber OPTIONAL, [35] BSCIdentification OPTIONAL, [36] ServiceCategory OPTIONAL, [37] CICCode OPTIONAL, [38] CICCode OPTIONAL, [39] SPC14 OPTIONAL, [40] SPC24 OPTIONAL, [41] TKGPName OPTIONAL, [42] TKGPName OPTIONAL, [43] ISDN-AddressString OPTIONAL, [44] BSCIdentification24 OPTIONAL, [45] GlobalCallReference OPTIONAL, [46] RoutingCategory OPTIONAL, [47] CallDuration OPTIONAL, [48] INTEGER OPTIONAL, [58] RoamCamelInfomation OPTIONAL, [59] TrafficType OPTIONAL, [60] TrafficType OPTIONAL, [61] TimeStamp OPTIONAL
}
3.1.5
IncGatewayRecord IncGatewayRecord ::= SET
40
{
45
50
55
60
recordType [0] CallEventRecordType, callingNumber [1] CallingNumber OPTIONAL, calledNumber [2] CalledNumber, recordingEntity [3] RecordingEntity, mscIncomingTKGP [4] TrunkGroup OPTIONAL, mscOutgoingTKGP [5] TrunkGroup OPTIONAL, seizureTime [6] TimeStamp, answerTime [7] TimeStamp OPTIONAL, releaseTime [8] TimeStamp OPTIONAL, callDuration [9] CallDuration, dataVolume [10] DataVolume OPTIONAL, causeForTerm [11] CauseForTerm, diagnostics [12] Diagnostics OPTIONAL, callReference [13] CallReference, sequenceNumber [14] LongPartSeqNumber OPTIONAL, lastLongPartInd [15] NULL OPTIONAL, recordExtensions [16] ManagementExtensions OPTIONAL, exchangeIdentity [17] IA5STRING OPTIONAL, additionalChgInfo [18] AdditionalChgInfo OPTIONAL, recordSequenceNumber [19] RecordSeqNumber, pbrt [20] Pbrt OPTIONAL, dDCFlag [25] DDCFlag OPTIONAL, gatewayRecordType [26] GatewayRecordType OPTIONAL,
ZTE Confidential Proprietary
Page 88 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 roamingNumber redirectNumber incomingCic outgoingCic mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName forwardCallIndicator partialRecordType serviceChangeInitiator reasonForServiceChange typeOfServiceChange isdnBasicService globalCallReference mNPNumber isMultiMediaCall
5
10
15
mNPRoutingNumber
[27] BCDDirectoryNumber OPTIONAL, [28] BCDDirectoryNumber OPTIONAL, [29] CICCode OPTIONAL, [30] CICCode OPTIONAL, [31] SPC14 OPTIONAL, [32] SPC24 OPTIONAL, [33] TKGPName OPTIONAL, [34] TKGPName OPTIONAL, [35] ForwardCallIndicator OPTIONAL, [36] PartialRecordType OPTIONAL, [37] INTEGER OPTIONAL, [38] ReasonForServiceChange OPTIONAL, [39] TypeOfServiceChange OPTIONAL, [40] BasicServiceCode OPTIONAL, [41] GlobalCallReference OPTIONAL, [42] BCDDirectoryNumber OPTIONAL, [43] NULL OPTIONAL, [44] AddressString OPTIONAL, [45] TrunkLine OPTIONAL, [46] CallDuration OPTIONAL, [48] NULL OPTIONAL, [49] Gsm-SCFAddress OPTIONAL, [50] ServiceKey OPTIONAL, [51] NetworkCallReference OPTIONAL, [52] MSCAddress OPTIONAL, [53] DefaultCallHandling OPTIONAL, [54] NumberOfDPEncountered OPTIONAL, [55] LevelOfCAMELService OPTIONAL, [56] FreeFormatData OPTIONAL, [57] SEQUENCE OF CAMELInformation
trunkLine millisecDuration isCAMELCall gsm-SCFAddress serviceKey networkCallReference mSCAddress defaultCallHandling numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation OPTIONAL, freeFormatDataAppend [58] BOOLEAN OPTIONAL, outPulsedNumber [59] BCDDirectoryNumber OPTIONAL, operatorId [60] INTEGER OPTIONAL, initialCalledNumber [62] BCDDirectoryNumber OPTIONAL, connectedNumber [63] BCDDirectoryNumber OPTIONAL, forwardedToNumber [64] BCDDirectoryNumber OPTIONAL, localOfficeForward [65] BOOLEAN OPTIONAL, incomingTrafficType [66] TrafficType OPTIONAL, outgoingTrafficType [67] TrafficType OPTIONAL, startTime [68] TimeStamp OPTIONAL
20
25
30
35
40
}
3.1.6
OutGatewayRecord OutGatewayRecord ::= SET
45
{
50
55
60
recordType callingNumber calledNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics callReference sequenceNumber lastLongPartInd recordExtensions exchangeIdentity
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] CallingNumber OPTIONAL, [2] CalledNumber, [3] RecordingEntity, [4] TrunkGroup OPTIONAL, [5] TrunkGroup OPTIONAL, [6] TimeStamp, [7] TimeStamp OPTIONAL, [8] TimeStamp OPTIONAL, [9] CallDuration, [10] DataVolume OPTIONAL, [11] CauseForTerm, [12] Diagnostics OPTIONAL, [13] CallReference, [14] LongPartSeqNumber OPTIONAL, [15] NULL OPTIONAL, [16] ManagementExtensions OPTIONAL, [17] IA5STRING OPTIONAL,
Page 89 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 additionalChgInfo [18] AdditionalChgInfo OPTIONAL, recordSequenceNumber [19] RecordSeqNumber, pbrt [20] Pbrt OPTIONAL, dDCFlag [25] DDCFlag OPTIONAL, gatewayRecordType [26] GatewayRecordType OPTIONAL, roamingNumber [27] BCDDirectoryNumber OPTIONAL, redirectNumber [28] BCDDirectoryNumber OPTIONAL, incomingCic [29] CICCode OPTIONAL, outgoingCic [30] CICCode OPTIONAL, mscSPC14 [31] SPC14 OPTIONAL, mscSPC24 [32] SPC24 OPTIONAL, incomingTKGPName [33] TKGPName OPTIONAL, outgoingTKGPName [34] TKGPName OPTIONAL, partialRecordType [36] PartialRecordType OPTIONAL, serviceChangeInitiator [37] INTEGER OPTIONAL, reasonForServiceChange [38] ReasonForServiceChange OPTIONAL, typeOfServiceChange [39] TypeOfServiceChange OPTIONAL, isdnBasicService [40] BasicServiceCode OPTIONAL, globalCallReference [41] GlobalCallReference OPTIONAL, mNPNumber [42] BCDDirectoryNumber OPTIONAL, isMultiMediaCall [43] NULL OPTIONAL, trunkLine [45]TrunkLine OPTIONAL, millisecDuration [46] CallDuration OPTIONAL, rnPlusB [47] NULL OPTIONAL, operatorId [60] INTEGER OPTIONAL, initialCalledNumber [62] BCDDirectoryNumber OPTIONAL, connectedNumber [63] BCDDirectoryNumber OPTIONAL, forwardedToNumber [64] BCDDirectoryNumber OPTIONAL, localOfficeForward [65] BOOLEAN OPTIONAL, incomingTrafficType [66] TrafficType OPTIONAL, outgoingTrafficType [67] TrafficType OPTIONAL, startTime [68] TimeStamp OPTIONAL
5
10
15
20
25
30
}
3.1.7 35
40
45
50
55
60
TransitRecord TransitRecord ::= SET { recordType [0] CallEventRecordType, callingNumber [1] CallingNumber OPTIONAL, calledNumber [2] CalledNumber, isdnBasicService [3] BasicServiceCode OPTIONAL, recordingEntity [4] RecordingEntity, mscIncomingTKGP [5] TrunkGroup OPTIONAL, mscOutgoingTKGP [6] TrunkGroup OPTIONAL, seizureTime [7] TimeStamp OPTIONAL, answerTime [8] TimeStamp OPTIONAL, releaseTime [9] TimeStamp OPTIONAL, callDuration [10] CallDuration, dataVolume [11] DataVolume OPTIONAL, causeForTerm [12] CauseForTerm, diagnostics [13] Diagnostics OPTIONAL, callReference [14] CallReference, sequenceNumber [15] LongPartSeqNumber OPTIONAL, lastLongPartInd [16] NULL OPTIONAL, recordExtensions [17] ManagementExtensions OPTIONAL, exchangeIdentity [18] IA5STRING OPTIONAL, additionalChgInfo [19] AdditionalChgInfo OPTIONAL, recordSequenceNumber [20] RecordSeqNumber, pbrt [21] Pbrt OPTIONAL, dDCFlag [26] DDCFlag OPTIONAL, roamingNumber [27] BCDDirectoryNumber OPTIONAL, redirectNumber 28] BCDDirectoryNumber OPTIONAL, incomingCic [29] CICCode OPTIONAL, outgoingCic [30] CICCode OPTIONAL, mscSPC14 [31] SPC14 OPTIONAL,
ZTE Confidential Proprietary
Page 90 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 mscSPC24 [32] SPC24 OPTIONAL, incomingTKGPName [33] TKGPName OPTIONAL, outgoingTKGPName [34] TKGPName OPTIONAL, globalCallReference [35] GlobalCallReference OPTIONAL, mNPNumber [36] BCDDirectoryNumber OPTIONAL, isMultiMediaCall [37] NULL OPTIONAL, partialRecordType [38] PartialRecordType OPTIONAL, reasonForServiceChange [39] ReasonForServiceChange OPTIONAL, serviceChangeInitiator [40] INTEGER OPTIONAL, typeOfServiceChange [41] TypeOfServiceChange OPTIONAL, trunkLine [42] TrunkLine OPTIONA, millisecDuration [43] CallDuration OPTIONAL, isCAMELCall [44] NULL OPTIONAL, gsm-SCFAddress [45] Gsm-SCFAddress OPTIONAL, serviceKey [46] ServiceKey OPTIONAL, networkCallReference [47] NetworkCallReference OPTIONAL, mSCAddress [48] MSCAddress OPTIONAL, defaultCallHandling [49] DefaultCallHandling OPTIONAL, numberOfDPEncountered [50] NumberOfDPEncountered OPTIONAL, levelOfCAMELService [51] LevelOfCAMELService OPTIONAL, freeFormatData [52] FreeFormatData OPTIONAL, cAMELCallLegInformation [53] SEQUENCE OF CAMELInformation OPTIONAL, freeFormatDataAppend [54] BOOLEAN OPTIONAL, outPulsedNumber [55] BCDDirectoryNumber OPTIONAL, operatorId [56] INTEGER OPTIONAL, initialCalledNumber [58] BCDDirectoryNumber OPTIONAL, connectedNumber [59] BCDDirectoryNumber OPTIONAL, incomingTrafficType [60] TrafficType OPTIONAL, outgoingTrafficType [61] TrafficType OPTIONAL, startTime [62] TimeStamp OPTIONAL
5
10
15
20
25
30
}
3.1.8
MOSMSRecord MOSMSRecord ::= SET
35
{
40
45
50
55
60
recordType servedIMSI servedIMEI servedMSISDN msClassmark serviceCentre recordingEntity location messageReference originationTime smsResult recordExtensions destinationNumber cAMELSMSInformation systemType exchangeIdentity recordSequenceNumber hotBillingTag hotBillingTag2 transactionIdentification mscSPC14 mscSPC24 directSmsFlag numOfConcatenated concatenatedRecordNum concatenatedRef tPMessageTypeIndicator sMSLength
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] IMSI, [2] IMEI OPTIONAL, [3] MSISDN OPTIONAL, [4] Classmark, [5] AddressString, [6] RecordingEntity, [7] LocationAreaAndCell OPTIONAL, [8] MessageReference OPTIONAL, [9] TimeStamp, [10] SMSResult OPTIONAL, [11] ManagementExtensions OPTIONAL, [12] CalledNumber OPTIONAL, [13] CAMELSMSInformation OPTIONAL, [14] SystemType, [15] IA5STRING OPTIONAL, [16] RecordSeqNumber, [17] HotBillingTag OPTIONAL, [18] HotBillingTag2 OPTIONAL, [19] INTEGER OPTIONAL, [20] SPC14 OPTIONAL, [21] SPC24 OPTIONAL, [22] DirectSMSFlag OPTIONAL, [23] INTEGER OPTIONAL, [24] INTEGER OPTIONAL, [25] INTEGER OPTIONAL, [26] TPMsgType-MO OPTIONAL, [27] SMSLength OPTIONA,
Page 91 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 callReference locationExtension operatorId basicService }
5
3.1.9
[28] CallReference OPTIONAL, [29] LocationCellExtension OPTIONAL, [30] INTEGER OPTIONAL, [32] BasicServiceCode OPTIONAL
MTSMSRecord MTSMSRecord ::= SET { recordType serviceCentre servedIMSI servedIMEI servedMSISDN msClassmark recordingEntity location deliveryTime smsResult recordExtensions systemType exchangeIdentity recordSequenceNumber originationNumber hotBillingTag hotBillingTag2 transactionIdentification mscSPC14 mscSPC24 cAMELSMSInformation directSmsFlag numOfConcatenated concatenatedRecordNum concatenatedRef tPMessageTypeIndicator sMSLength callReference locationExtension operatorId basicService
10
15
20
25
30
35
40
[0] CallEventRecordType, [1] AddressString, [2] IMSI, [3] IMEI OPTIONAL, [4] MSISDN OPTIONAL, [5] Classmark OPTIONAL, [6] RecordingEntity, [7] LocationAreaAndCell OPTIONAL, [8] TimeStamp, [9] SMSResult OPTIONAL, [10] ManagementExtensions OPTIONAL, [11] SystemType, [12] IA5STRING OPTIONAL, [13] RecordSeqNumber, [14] BCDDirectoryNumber OPTIONAL, [15] HotBillingTag OPTIONAL, [16] HotBillingTag2 OPTIONAL, [17] INTEGER OPTIONAL, [18] SPC14 OPTIONAL, [19] SPC24 OPTIONAL, [20] CAMELSMSInformation OPTIONAL, [21] DirectSMSFlag OPTIONAL, [22] INTEGER OPTIONAL, [23] INTEGER OPTIONAL, [24] INTEGER OPTIONAL, [25] TPMsgType-MT OPTIONAL, [26] SMSLength OPTIONAL, [27] CallReference OPTIONAL, [28] LocationCellExtension OPTIONAL, [29] INTEGER OPTIONAL, [31] BasicServiceCode OPTIONAL
}
3.1.10
45
50
55
60
SSActionRecord SSActionRecord ::= SET { recordType servedIMSI servedIMEI servedMSISDN msClassmark recordingEntity location basicService supplService ssAction ssActionTime ssParameters ssActionResult callReference recordExtensions systemType exchangeIdentity recordSequenceNumber
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] IMSI , [2] IMEI OPTIONAL, [3] MSISDN OPTIONAL, [4] Classmark, [5] RecordingEntity, [6] LocationAreaAndCell OPTIONAL, [7] BasicServices OPTIONAL, [8] SS-Code OPTIONAL, [9] SSActionType OPTIONAL, [10] TimeStamp, [11] SSParameters OPTIONAL, [12] SSActionResult OPTIONAL, [13] CallReference, [14] ManagementExtensions OPTIONAL, [15] SystemType, [16] IA5STRING OPTIONAL, [17] RecordSeqNumber,
Page 92 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 forwardedSubNumber noReplyCondTime hotBillingTag2 transactionIdentification mscSPC14 mscSPC24
5
globalCallReference operatorId
[18] ForwardedSubNumber OPTIONAL, [19] NoReplyCondTime OPTIONAL, [20] HotBillingTag2 OPTIONAL, [21] INTEGER OPTIONAL, [22] SPC14 OPTIONAL, [23] SPC24 OPTIONAL, [24] GlobalCallReference OPTIONAL, [25] INTEGER OPTIONAL
}
103.1.11
MOECallRecord MOECallRecord ::= SET {
15
20
25
30
35
40
45
50
55
60
recordType [0] CallEventRecordType, servedIMSI [1] IMSI OPTIONAL, servedIMEI [2] IMEI OPTIONAL, servedMSISDN [3] MSISDN OPTIONAL, translatedNumber [4] BCDDirectoryNumber OPTIONAL, recordingEntity [5] RecordingEntity, mscIncomingTKGP [6] TrunkGroup OPTIONAL, mscOutgoingTKGP [7] TrunkGroup OPTIONAL, location [8] LocationAreaAndCell OPTIONAL, changeOfLocation [9] SEQUENCE OF LocationChange OPTIONAL, basicService [10] BasicServiceCode, aocParameters [11] AOCParameters OPTIONAL, changeOfAOCParms [12] SEQUENCE OF AOCParmChange OPTIONAL, msClassmark [13] Classmark OPTIONAL, changeOfClassmark [14] SEQUENCE OF ChangeOfClassmark OPTIONAL, seizureTime [15] TimeStamp OPTIONAL, answerTime [16] TimeStamp OPTIONAL, releaseTime [17] TimeStamp OPTIONAL, callDuration [18] CallDuration, radioChanRequested [19] RadioChanRequested OPTIONAL, radioChanUsed [20] TrafficChannel OPTIONAL, changeOfRadioChan [21] ChangeOfRadioChannel OPTIONAL, causeForTerm [22] CauseForTerm, diagnostics [23] Diagnostics OPTIONAL, sequenceNumber [24] LongPartSeqNumber OPTIONAL, lastLongPartInd [25] NULL OPTIONAL, callReference [26] CallReference, recordExtensions [27] ManagementExtensions OPTIONAL, systemType [28] SystemType, exchangeIdentity [29] IA5STRING OPTIONAL, subscriberCategory [30] SubscriberCategory OPTIONAL, calledNumber [31] CalledNumber OPTIONAL, recordSequenceNumber [32] RecordSeqNumber, roamingNumber [33] MSISDN OPTIONAL, eMLPPPriorityLevel [34] EMLPPPriorityLevel OPTIONAL, eMLPPRequestPriorityLevel [35]EMLPPRequestPriorityLevel OPTIONAL, hotBillingTag [36]HotBillingTag OPTIONAL, carp [37] Carp OPTIONAL, hotBillingTag2 [38] HotBillingTag2 OPTIONAL, bSCIdentification [39] BSCIdentification OPTIONAL, transactionIdentification [40] INTEGER OPTIONAL, incomingCic [41] CICCode OPTIONAL, outgoingCic [42] CICCode OPTIONAL, mscSPC14 [43] SPC14 OPTIONAL, mscSPC24 [44] SPC24 OPTIONAL, incomingTKGPName [45] TKGPName OPTIONAL, outgoingTKGPName [46] TKGPName OPTIONAL, bscIdentification24 [47] BSCIdentification24 OPTIONAL, globalCallReference [48] GlobalCallReference OPTIONAL,
ZTE Confidential Proprietary
Page 93 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 iuReleaseCause aReleaseCause isCAMELCall dPNumber gsm-SCFAddress mSCAddress levelOfCAMELService serviceKey defaultCallHandling networkCallReference routingCategory millisecDuration operatorId suppressCAMELInd
5
10
15
[49] IuReleaseCause OPTIONAL, [50] AReleaseCause OPTIONAL, [51] NULL OPTIONAL, [52] INTEGER OPTIONAL, [53] Gsm-SCFAddress OPTIONAL [54] MSCAddress OPTIONAL [55] LevelOfCAMELService OPTIONAL [56] ServiceKey OPTIONAL, [57] DefaultCallHandling OPTIONAL, [58] NetworkCallReference OPTIONAL, [59] RoutingCategory OPTIONAL, [60] CallDuration OPTIONAL, [61] INTEGER OPTIONAL, [63] BOOLEAN OPTIONAL
}
3.1.12
MCFCallRecord MCFCallRecord ::= SET {
20
25
30
35
40
45
50
55
60
recordType [0] CallEventRecordType, mcfType [1] McfType, servedIMSI [2] IMSI , servedIMEI [3] IMEI OPTIONAL, servedMSISDN [4] MSISDN OPTIONAL, callingNumber [5] BCDDirectoryNumber OPTIONAL, calledNumber [6] BCDDirectoryNumber OPTIONAL, translatedNumber [7] BCDDirectoryNumber OPTIONAL, connectedNumber [8] BCDDirectoryNumber OPTIONAL, roamingNumber [9] ISDN-AddressString OPTIONAL, recordingEntity [10] RecordingEntity, mscIncomingTKGP [11] TrunkGroup OPTIONAL, mscOutgoingTKGP [12] TrunkGroup OPTIONAL, basicService [13] BasicServiceCode OPTIONAL, transparencyIndicator [14] TransparencyInd OPTIONAL, changeOfService [15] SEQUENCE OF ChangeOfService OPTIONAL, -- NOT SUPPORT supplServicesUsed [16] SEQUENCE OF SuppServiceUsed OPTIONAL, seizureTime [17] TimeStamp OPTIONAL, answerTime [18] TimeStamp OPTIONAL, releaseTime [19] TimeStamp OPTIONAL, callDuration [20] CallDuration, causeForTerm [21] CauseForTerm, diagnostics [22] Diagnostics OPTIONAL, dataVolume [23] DataVolume OPTIONAL, sequenceNumber [24] LongPartSeqNumber OPTIONAL, lastLongPartInd [25] NULL OPTIONAL, callReference [26] CallReference, additionalChgInfo [27] AdditionalChgInfo OPTIONAL, recordExtensions [28] ManagementExtensions OPTIONAL, isCAMELCall [29] NULL OPTIONAL, gsm-SCFAddress [30] Gsm-SCFAddress OPTIONAL, serviceKey [31] ServiceKey OPTIONAL, networkCallReference [32] NetworkCallReference OPTIONAL, mSCAddress [33] MSCAddress OPTIONAL, cAMELInitCFIndicator [34] CAMELInitCFIndicator OPTIONAL, defaultCallHandling [35] DefaultCallHandling OPTIONAL, numberOfDPEncountered [36] NumberOfDPEncountered OPTIONAL, levelOfCAMELService [37] LevelOfCAMELService OPTIONAL, freeFormatData [38] FreeFormatData OPTIONAL, cAMELCallLegInformation [39] SEQUENCE OF CAMELInformation OPTIONAL, -- NOT SUPPORT freeFormatDataAppend [40] BOOLEAN OPTIONAL, defaultCallHandling_2 [41] DefaultCallHandling OPTIONAL, gsm-SCFAddress_2 [42] Gsm-SCFAddress OPTIONAL,
ZTE Confidential Proprietary
Page 94 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 serviceKey_2 [43] ServiceKey OPTIONAL, freeFormatData_2 [44] FreeFormatData OPTIONAL, freeFormatDataAppend_2 [45] BOOLEAN OPTIONAL, subscriberCategory [46] SubscriberCategory OPTIONAL, systemType [47] SystemType OPTIONAL, -- NOT SUPPORT exchangeIdentity [48] IA5STRING OPTIONAL, recordSequenceNumber [49] RecordSeqNumber, numberOfForwarding [50] NumberOfForwarding OPTIONAL, hotBillingTag [51] HotBillingTag OPTIONAL, isCUGUsed [52] NULL OPTIONAL, cUGCategory [53] CUGCategory OPTIONAL, cUGInterLockCode [54] CUGInterLockCode OPTIONAL, dataRate [55] DataRate OPTIONAL, isMultiMediaCall [56] NULL OPTIONAL, rateIndication [57]RateIndication OPTIONAL, fnur [58] Fnur OPTIONAL, pbrt [59] Pbrt OPTIONAL, carp [60] Carp OPTIONAL, cUGIndex [61] CUGIndex OPTIONAL, cUGOutgoingAccessUsed [62] NULL OPTIONAL, cUGOutgoingAccessInd [63] NULL OPTIONAL, hotBillingTag2 [64] HotBillingTag2 OPTIONAL, bSCIdentification [65] BSCIdentification OPTIONAL, calledLocation [66] LocationAreaAndCell OPTIONAL, callingPartyRoamingInd [67] BOOLEAN OPTIONAL, serviceCategory [68] ServiceCategory OPTIONAL, incomingCic [69] CICCode OPTIONAL, outgoingCic [70] CICCode OPTIONAL, mscSPC14 [71] SPC14 OPTIONAL, mscSPC24 [72] SPC24 OPTIONAL, incomingTKGPName [73] TKGPName OPTIONAL, outgoingTKGPName [74] TKGPName OPTIONAL, partialRecordType [75] PartialRecordType OPTIONAL, serviceChangeInitiator [76] INTEGER OPTIONAL, reasonForServiceChange [77] ReasonForServiceChange OPTIONAL, typeOfServiceChange [78] TypeOfServiceChange OPTIONAL, bscIdentification24 [79] BSCIdentification24 OPTIONAL, globalCallReference [80] GlobalCallReference OPTIONAL, mNPNumber [81] BCDDirectoryNumber OPTIONAL, byPass [82] INTEGER OPTIONAL, wANAPPS [83] INTEGER OPTIONAL, mNPRoutingNumber [84] AddressString OPTIONAL,
5
10
15
20
25
30
35
40
fordwardedToIMSI routingCategory millisecDuration location outPulsedNumber
45
byPassFlag2 operatorId originalCalledNumber localOfficeForward incomingTrafficType outgoingTrafficType startTime suppressCAMELInd
50
55
[85] IMSI OPTIONAL, [86] RoutingCategory OPTIONAL, [87] CallDuration OPTIONAL, [88] LocationAreaAndCell OPTIONAL, [89] BCDDirectoryNumber OPTIONAL, [90] INTEGER OPTIONAL, [91] INTEGER OPTIONAL, [101] AddressString OPTIONAL, [102] BOOLEAN OPTIONAL, [103] TrafficType OPTIONAL, [104] TrafficType OPTIONAL, [105] TimeStamp OPTIONAL, [115] BOOLEAN OPTIONAL
}
3.1.13 60
CommonEquipRecord CommonEquipRecord ::= SET { recordType equipmentType equipmentId servedIMSI
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] EquipmentType, [2] EquipmentId OPTIONAL, [3] IMSI,
Page 95 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 servedMSISDN [4] MSISDN OPTIONAL, recordingEntity [5] RecordingEntity, basicService [6] BasicServiceCode OPTIONAL, changeOfService [7] SEQUENCE OF ChangeOfService OPTIONAL, supplServicesUsed [8] SEQUENCE OF SuppServiceUsed OPTIONAL, seizureTime [9] TimeStamp, releaseTime [10] TimeStamp OPTIONAL, callDuration [11] CallDuration, callReference [12] CallReference, sequenceNumber [13] LongPartSeqNumber OPTIONAL, lastLongPartInd [14] NULL OPTIONAL, recordExtensions [15] ManagementExtensions OPTIONAL, exchangeIdentity [16] IA5STRING OPTIONAL, recordSequenceNumber [17] RecordSeqNumber, systemType [18]SystemType, rateIndication [19] RateIndication OPTIONAL, fnur [20] Fnur OPTIONAL, hotBillingTag2 [21] HotBillingTag2 OPTIONAL, millisecDuration [22] CallDuration OPTIONAL, operatorId [23] INTEGER OPTIONAL
5
10
15
20
}
3.1.14
TermCAMELIntRecord TermCAMELIntRecord ::= SET {
25
30
35
40
45
50
55
60
recordType [0] CallEventRecordType, servedIMSI [1] IMSI, servedMSISDN [2] MSISDN OPTIONAL, recordingEntity [3] RecordingEntity, interrogationTime [4] TimeStamp, destinationRoutingAddress [5] AddressString, gsm-SCFAddress [6] Gsm-SCFAddress, serviceKey [7] ServiceKey, networkCallReference [8] NetworkCallReference, mSCAddress [9] MSCAddress OPTIONAL, defaultCallHandling [10] DefaultCallHandling OPTIONAL, recordExtensions [11] ManagementExtensions OPTIONAL, calledNumber [12] CalledNumber, callingNumber [13] CallingNumber OPTIONAL, mscIncomingTKGP [14] TrunkGroup OPTIONAL, mscOutgoingTKGP [15] TrunkGroup OPTIONAL, seizureTime [16] TimeStamp OPTIONAL, answerTime [17] TimeStamp OPTIONAL, releaseTime [18] TimeStamp OPTIONAL, callDuration [19] CallDuration, dataVolume [20] DataVolume OPTIONAL, causeForTerm [21] CauseForTerm, diagnostics [22] Diagnostics OPTIONAL, callReference [23] CallReference, sequenceNumber [24] LongPartSeqNumber OPTIONAL, lastLongPartInd [25] NULL OPTIONAL, numberOfDPEncountered [26] NumberOfDPEncountered OPTIONAL, levelOfCAMELService [27] LevelOfCAMELService OPTIONAL, freeFormatData [28] FreeFormatData OPTIONAL, cAMELCallLegInformation [29] SEQUENCE OF CAMELInformation OPTIONAL, freeFormatDataAppend [30] BOOLEAN OPTIONAL, exchangeIdentity [31] IA5STRING OPTIONAL, recordSequenceNumber [32] RecordSeqNumber, mscServerIndication [33] BOOLEAN OPTIONAL, gsm-SCFAddress-2 [34] Gsm-SCFAddress OPTIONAL, serviceKey-2 [35] ServiceKey OPTIONAL, defaultCallHandling-2 [36] DefaultCallHandling OPTIONAL, freeFormatData-2 [37] FreeFormatData OPTIONAL, freeFormatDataAppend-2 [38] BOOLEAN OPTIONAL,
ZTE Confidential Proprietary
Page 96 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 hotBillingTag2 incomingCic outgoingCic MscSPC14 MscSPC24 incomingTKGPName outgoingTKGPName
5
globalCallReference millisecDuration
byPassFlag2
10
operatorId incomingTrafficType outgoingTrafficType startTime
15
[43] HotBillingTag2 OPTIONAL, [44] CICCode OPTIONAL, [45] CICCode OPTIONAL, [46] SPC14 OPTIONAL, [47] SPC24 OPTIONAL, [48] TKGPName OPTIONAL, [49] TKGPName OPTIONAL, [50] GlobalCallReference OPTIONAL, [51] CallDuration OPTIONAL [52] INTEGER OPTIONAL, [53] INTEGER OPTIONAL, [55] TrafficType OPTIONAL, [56] TrafficType OPTIONAL, [57] TimeStamp OPTIONAL
}
3.1.15
HLRIntRecord HLRIntRecord ::= SET { recordType servedIMSI servedMSISDN recordingEntity basicService routingNumber interrogationTime numberOfForwarding interrogationResult recordExtensions exchangeIdentity recordSequenceNumber hotBillingTag2 operatorId sdcInterrogationFlag callingNumberBeforeSDC oriCalledNumberBeforeSDC sdcInterrogatedCallingNumber dcInterrogatedOriCalledNumber
20
25
30
35
[0] CallEventRecordType, [1] IMSI OPTIONAL, [2] AddressString, [3] RecordingEntity, [4] BasicServiceCode OPTIONAL, [5] RoutingNumber, [6] TimeStamp, [7] NumberOfForwarding OPTIONAL, [8] HLRIntResult OPTIONAL, [9] ManagementExtensions OPTIONAL, [10] IA5STRING OPTIONAL, [11] RecordSeqNumber, [12] HotBillingTag2 OPTIONAL, [13] INTEGER OPTIONAL, [14] NULL OPTIONAL, [15] AddressString OPTIONAL, [16] AddressString OPTIONAL, [17] AddressString OPTIONAL, [18] AddressString OPTIONAL
}
3.1.16 40
MTLCSRecord MTLCSRecord::= SET {
45
50
55
recordType recordingEntity lcsClientType lcsClientIdentity servedIMSI servedMSISDN locationType lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration notificationToMSUser privacyOverride location locationEstimate positioningData lcsCause
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] RecordingEntity, [2] LCSClientType, [3] LCSClientIdentity, [4] IMSI, [5] MSISDN OPTIONAL, [6] LocationType, [7] LCSQoSInfo OPTIONAL, [8] LCS-Priority OPTIONAL, [9] ISDN-AddressString, [10] TimeStamp, [11] CallDuration OPTIONAL, [12] NotificationToMSUser OPTIONAL, [13] NULL OPTIONAL, [14] LocationAreaAndCell OPTIONAL, [15] Ext-GeographicalInformation OPTIONAL, [16] PositioningData OPTIONAL, [17] LCSCause OPTIONAL,
Page 97 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 diagnostics systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo hotBillingTag2 operatorId
5
10
[18] Diagnostics OPTIONAL, [19] SystemType, [20] ManagementExtensions OPTIONAL, [21] RecordSeqNumber, [22] HotBillingTag OPTIONAL, [23] CauseForTerm OPTIONAL, [24] AdditionalChgInfo OPTIONAL, [25] HotBillingTag2 OPTIONAL, [26] INTEGER OPTIONAL
}
3.1.17
MOLCSRecord MOLCSRecord ::= SET { recordType recordingEntity lcsClientType lcsClientIdentity servedIMSI servedMSISDN molr-Type lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration location locationEstimate positioningData lcsCause diagnostics systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo hotBillingTag2 operatorId
15
20
25
30
35
[0] CallEventRecordType, [1] RecordingEntity, [2] LCSClientType OPTIONAL, [3] LCSClientIdentity OPTIONAL, [4] IMSI, [5] MSISDN OPTIONAL, [6] MOLR-Type, [7] LCSQoSInfo OPTIONAL, [8] LCS-Priority OPTIONAL, [9] ISDN-AddressString OPTIONAL, [10] TimeStamp, [11] CallDuration OPTIONAL, [12] LocationAreaAndCell OPTIONAL, [13] Ext-GeographicalInformation OPTIONAL, [14] PositioningData OPTIONAL, [15] LCSCause OPTIONAL, [16] Diagnostics OPTIONAL, [17] SystemType, [18] ManagementExtensions OPTIONAL, [19] RecordSeqNumber, [20] HotBillingTag OPTIONAL, [21] CauseForTerm OPTIONAL, [22] AdditionalChgInfo OPTIONAL, [23] HotBillingTag2 OPTIONAL, [24] INTEGER OPTIONAL
}
403.1.18
NILCSRecord NILCSRecord::= SET {
45
50
55
recordType recordingEntity lcsClientType lcsClientIdentity servedIMSI servedMSISDN servedIMEI emsDigits emsKey lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration locationEstimate positioningData lcsCause
ZTE Confidential Proprietary
[0] CallEventRecordType, [1] RecordingEntity, [2] LCSClientType OPTIONAL, [3] LCSClientIdentity OPTIONAL, [4] IMSI OPTIONAL, [5] MSISDN OPTIONAL, [6] IMEI OPTIONAL, [7] ISDN-AddressString OPTIONAL, [8] ISDN-AddressString OPTIONAL, [9] LCSQoSInfo OPTIONAL, [10] LCS-Priority OPTIONAL, [11] ISDN-AddressString OPTIONAL, [12] TimeStamp, [13] CallDuration OPTIONAL, [15] Ext-GeographicalInformation OPTIONAL, [16] PositioningData OPTIONAL, [17] LCSCause OPTIONAL,
Page 98 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 diagnostics systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo hotBillingTag2 operatorId
5
10
[18] Diagnostics OPTIONAL, [19] SystemType, [20] ManagementExtensions OPTIONAL, [21] RecordSeqNumber, [22] HotBillingTag OPTIONAL, [23] CauseForTerm OPTIONAL, [24] AdditionalChgInfo OPTIONAL, [25] HotBillingTag2 OPTIONAL [26] INTEGER OPTIONAL
}
3.1.19
USSDRecord USSDRecord ::= SET { recordType servedIMSI servedIMEI servedMSISDN msClassmark recordingEntity startTime endTime location callReference uSSDInteractionCount uSSDUnstructuredData uSSDOperationCode uSSDDataCodingScheme uSSDServiceCode errorCode systemType hotBillingTag exchangeIdentity recordSequenceNumber hotBillingTag2 operatorId
15
20
25
30
35
[0] CallEventRecordType, [1] IMSI , [2] IMEI OPTIONAL, [3] MSISDN, [4] Classmark, [5] RecordingEntity, [6] TimeStamp OPTIONAL, [7] TimeStamp OPTIONAL, [8] LocationAreaAndCell , [9] CallReference, [10] INTEGER OPTIONAL, [11] OCTET STRING(SIZE(0..185)) OPTIONAL, [12] USSDOperationCode OPTIONAL, [13] USSDDataCodingScheme OPTIONAL, [14] USSDServiceCode OPTIONAL, [15] Diagnostics OPTIONAL, [16] SystemType, [17] HotBillingTag OPTIONAL, [18] IA5STRING OPTIONAL, [19] RecordSeqNumber, [20] HotBillingTag2 OPTIONAL, [21] INTEGER OPTIONAL
}
3.1.20
VIGRecord VIGRecord ::= SET { recordType callingNumber calledNumber vigCallType startTime endTime callDuration causeForTerm diagnostics callReference sequenceNumber lastLongPartInd callDataRate exchangeIdentity recordSequenceNumber millisecDuration
40
45
50
55
[0] CallEventRecordType, [1] CallingNumber OPTIONAL, [2] CalledNumber OPTIONAL, [3] VIGCallType, [4] TimeStamp OPTIONAL, [5] TimeStamp OPTIONAL, [6] CallDuration, [7] CauseForTerm, [8] Diagnostics OPTIONAL, [9] CallReference, [10] LongPartSeqNumber OPTIONAL, [11] NULL OPTIONAL, [12] INTEGER, [13] IA5STRING OPTIONAL, [14] RecordSeqNumber, [15] CallDuration OPTIONAL
}
ZTE Confidential Proprietary
Page 99 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.1.21
SigMTPStatisticRecord SigMTPStatisticRecord::= SET { recordType recordSequenceNumber billType serviceIdentifier sPC oPC dPC chargedNeighbor amountOfMessage amountOfOctets recordOpeningTime recordClosingTime physicalLocation
5
10
15
[0] CallEventRecordType, [1] RecordSeqNumber OPTIONAL, [2] BillOrValidateFlag OPTIONAL, [3] MTPServiceIdentifier OPTIONAL, [4] SPCCode OPTIONAL, [5] SPCCode OPTIONAL, [6] SPCCode OPTIONAL, [7] SPCCode OPTIONAL, [8] INTEGER OPTIONAL, [9] INTEGER OPTIONAL, [10] TimeStamp OPTIONAL, [11] TimeStamp OPTIONAL, [12] INTEGER OPTIONAL,
}
3.1.22
SigSCCPStatisticRecord SigSCCPStatisticRecord::= SET
20
{ recordType recordSequenceNumber billType sPC oPC dPC sSN amountOfGTMessages recordOpeningTime recordClosingTime physicalLocation
25
30
[0] CallEventRecordType, [1] RecordSeqNumber OPTIONAL, [2] BillOrValidateFlag OPTIONAL, [3] SPCCode OPTIONAL, [4] SPCCode OPTIONAL, [5] SPCCode OPTIONAL, [6] SSNCode OPTIONAL, [7] INTEGER OPTIONAL, [8] TimeStamp OPTIONAL, [9] TimeStamp OPTIONAL, [10] INTEGER OPTIONAL,
}
3.1.23 35
MOCPHRecord MOCPHRecord ::= SET {
40
45
50
55
recordType servedIMSI servedIMEI servedMSISDN calledNumber roamingNumber recordingEntity mscIncomingTKGP location changeOfLocation basicService changeOfService supplServicesUsed aocParameters changeOfAOCParms msClassmark changeOfClassmark seizureTime answerTime releaseTime
ZTE Confidential Proprietary
[0]CallEventRecordType, [1]IMSI, [2]IMEI OPTIONAL, [3]MSISDN OPTIONAL, [5]CalledNumber OPTIONAL, [8]RoamingNumber OPTIONAL, [9]RecordingEntity, [10]TrunkGroup OPTIONAL, [12]LocationAreaAndCell, [13]SEQUENCE OF LocationChange OPTIONAL, [14]BasicServiceCode, [16]SEQUENCE OF ChangeOfService OPTIONAL, [17]SEQUENCE OF SuppServiceUsed OPTIONAL, [18]AOCParameters OPTIONAL, [19]SEQUENCE OF AOCParmChange OPTIONAL, [20]Classmark, [21]SEQUENCE OF ChangeOfClassmark OPTIONAL, [22]TimeStamp OPTIONAL, [23]TimeStamp OPTIONAL, [24]TimeStamp OPTIONAL,
Page 100 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 callDuration [25]CallDuration, radioChanRequested [27]RadioChanRequested OPTIONAL, radioChanUsed [28]TrafficChannel OPTIONAL, changeOfRadioChan [29]ChangeOfRadioChannelOPTIONAL, causeForTerm [30]CauseForTerm, diagnostics [31]Diagnostics OPTIONAL, callReference [32]CallReference, recordSequenceNumber [33]RecordSeqNumber, additionalChgInfo [34]AdditionalChgInfo OPTIONAL, recordExtensions [35]ManagementExtensions OPTIONAL, gsm-SCFAddress [36]Gsm-SCFAddress OPTIONAL, serviceKey [37]ServiceKey OPTIONAL, networkCallReference [38]NetworkCallReference OPTIONAL, mSCAddress [39]MSCAddress OPTIONAL, defaultCallHandling [41]DefaultCallHandling OPTIONAL, speechVersionSupported [49]SpeechVersionIdentifier OPTIONAL, speechVersionUsed [50]SpeechVersionIdentifier OPTIONAL, numberOfDPEncountered [51]NumberOfDPEncountered OPTIONAL, levelOfCAMELService [52]LevelOfCAMELService OPTIONAL, freeFormatData [53]FreeFormatData OPTIONAL, cAMELCPHCallLegInformation [54]SEQUENCE OF CAMELCPHInformation OPTIONAL, freeFormatDataAppend [55]BOOLEAN OPTIONAL, -- NOT SUPPORT systemType [61]SystemType, partialRecordType [69]PartialRecordType OPTIONAL, guaranteedBitRate [70]GuaranteedBitRate OPTIONAL, maximumBitRate [71]MaximumBitRate OPTIONAL, callSegmentId [101]CallSegmentId OPTIONAL, subscriberCategory [102]SubscriberCategory, partSequenceNumber [103]LongPartSeqNumber OPTIONAL, globalCallReference [104]GlobalCallReference OPTIONAL, millisecDuration [105]CallDuration OPTIONAL, lastLongPartInd [106]NULL OPTIONAL, hotBillingTag [107] HotBillingTag OPTIONAL, isCAMELCall [108] NULL OPTIONAL
5
10
15
20
25
30
35
}
3.1.24
MCFCPHRecord MCFCPHRecord ::=
SET
{ 40
45
50
55
60
recordType servedIMSI servedIMEI servedMSISDN callingNumber calledNumber recordingEntity mscIncomingTKGP basicService supplServicesUsed seizureTime answerTime releaseTime callDuration causeForTerm diagnostics callReference recordSequenceNumber additionalChgInfo recordExtensions gsm-SCFAddress serviceKey networkCallReference mSCAddress
ZTE Confidential Proprietary
[0]CallEventRecordType, [1]IMSI, [2]IMEI OPTIONAL, [3]MSISDN OPTIONAL, [4]BCDDirectoryNumber OPTIONAL, [5]BCDDirectoryNumber OPTIONAL, [9]RecordingEntity, [10]TrunkGroup OPTIONAL, [14]BasicServiceCode, [17]SEQUENCE OF SuppServiceUsed OPTIONAL, [22]TimeStamp OPTIONAL, [23]TimeStamp OPTIONAL, [24]TimeStamp OPTIONAL, [25]CallDuration, [30]CauseForTerm, [31]Diagnostics OPTIONAL, [32]CallReference, [33]RecordSeqNumber, [34]AdditionalChgInfo OPTIONAL, [35]ManagementExtensions OPTIONAL, [36]Gsm-SCFAddress OPTIONAL, [37]ServiceKey OPTIONAL, [38]NetworkCallReference OPTIONAL, [39]MSCAddress OPTIONAL,
Page 101 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 cAMELInitCFIndicator [40]CAMELInitCFIndicator OPTIONAL, defaultCallHandling [41]DefaultCallHandling OPTIONAL, numberOfDPEncountered [51]NumberOfDPEncountered OPTIONAL, levelOfCAMELService [52]LevelOfCAMELService OPTIONAL, freeFormatData [53]FreeFormatData OPTIONAL, cAMELCPHCallLegInformation [54]SEQUENCE OF CAMELCPHInformation OPTIONAL, freeFormatDataAppend [55]BOOLEAN OPTIONAL, -- NOT SUPPORT systemType [61]SystemType, partialRecordType [69]PartialRecordType OPTIONAL, callSegmentId [101]CallSegmentId OPTIONAL, mcfType [102]McfType, subscriberCategory [103]SubscriberCategory, partSequenceNumber [104]LongPartSeqNumber OPTIONAL, globalCallReference [105]GlobalCallReference OPTIONAL, millisecDuration [106]CallDuration OPTIONAL, lastLongPartInd [107]NULL OPTIONAL, hotBillingTag [108] HotBillingTag OPTIONAL, isCAMELCall [109] NULL OPTIONAL
5
10
15
20
}
3.1.25
TCICPHRecord TCICPHRecord ::= SET { recordType [0]CallEventRecordType, servedIMSI [1]IMSI, servedMSISDN [2]MSISDN OPTIONAL, recordingEntity [3]RecordingEntity, interrogationTime [4]TimeStamp, gsm-SCFAddress [6]Gsm-SCFAddress OPTIONAL, serviceKey [7]ServiceKey OPTIONAL, networkCallReference [8]NetworkCallReference OPTIONAL, mSCAddress [9]MSCAddress OPTIONAL, defaultCallHandling [10]DefaultCallHandling OPTIONAL, recordExtensions [11]ManagementExtensions OPTIONAL, calledNumber [12]BCDDirectoryNumber OPTIONAL, callingNumber [13]BCDDirectoryNumber OPTIONAL, mscIncomingTKGP [14]TrunkGroup OPTIONAL, seizureTime [16]TimeStamp OPTIONAL, answerTime [17]TimeStamp OPTIONAL, releaseTime [18]TimeStamp OPTIONAL, callDuration [19]CallDuration, causeForTerm [21]CauseForTerm, diagnostics [22]Diagnostics OPTIONAL, callReference [23]CallReference, recordSequenceNumber [24]RecordSeqNumber, numberOfDPEncountered [25]NumberOfDPEncountered OPTIONAL, levelOfCAMELService [26]LevelOfCAMELService OPTIONAL, freeFormatData [27]FreeFormatData OPTIONAL, cAMELCPHCallLegInformation [28]SEQUENCE OF CAMELCPHInformation OPTIONAL, freeFormatDataAppend [29]BOOLEAN OPTIONAL, -- NOT SUPPORT partialRecordType [42]PartialRecordType OPTIONAL, termCallType [101]TermCAMELCallType OPTIONAL, callSegmentId [102]CallSegmentId OPTIONAL, partSequenceNumber [103]LongPartSeqNumber OPTIONAL, globalCallReference [104]GlobalCallReference OPTIONAL, millisecDuration [105]CallDuration OPTIONAL, lastLongPartInd [106]NULL OPTIONAL
25
30
35
40
45
50
55
60
}
ZTE Confidential Proprietary
Page 102 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.1.26
GSICPHRecord GSICPHRecord ::=
SET
{ recordType [0]CallEventRecordType, servedMSISDN [3]MSISDN OPTIONAL, calledNumber [5]BCDDirectoryNumber OPTIONAL, recordingEntity [9]RecordingEntity, basicService [14]BasicServiceCode, causeForTerm [30]CauseForTerm, diagnostics [31]Diagnostics OPTIONAL, callReference [32]CallReference, recordSequenceNumber [33]RecordSeqNumber, additionalChgInfo [34]AdditionalChgInfo OPTIONAL, recordExtensions [35]ManagementExtensions OPTIONAL, gsm-SCFAddress [36]Gsm-SCFAddress OPTIONAL, networkCallReference [38]NetworkCallReference OPTIONAL, mSCAddress [39]MSCAddress OPTIONAL, defaultCallHandling [41]DefaultCallHandling OPTIONAL, numberOfDPEncountered [51]NumberOfDPEncountered OPTIONAL, levelOfCAMELService [52]LevelOfCAMELService OPTIONAL, cAMELCPHCallLegInformation [54]SEQUENCE OF CAMELCPHInformation OPTIONAL, partialRecordType [69]PartialRecordType OPTIONAL, callSegmentId [101]CallSegmentId OPTIONAL, partSequenceNumber [102]LongPartSeqNumber OPTIONAL, globalCallReference [103]GlobalCallReference OPTIONAL, lastLongPartInd [104]NULL OPTIONAL, isCAMELCall [105] NULL OPTIONAL
5
10
15
20
25
}
303.1.27
NCSCPHRecord NCSCPHRecord ::=
SET
{ 35
40
45
50
55
60
recordType [0]CallEventRecordType, servedIMSI [1]IMSI, servedIMEI [2]IMEI OPTIONAL, servedMSISDN [3]MSISDN OPTIONAL, calledNumber [5]BCDDirectoryNumber OPTIONAL, recordingEntity [9]RecordingEntity, basicService [14]BasicServiceCode, supplServicesUsed [17]SEQUENCE OF SuppServiceUsed OPTIONAL, causeForTerm [30]CauseForTerm, diagnostics [31]Diagnostics OPTIONAL, callReference [32]CallReference, recordSequenceNumber [33]RecordSeqNumber, additionalChgInfo [34]AdditionalChgInfo OPTIONAL, recordExtensions [35]ManagementExtensions OPTIONAL, gsm-SCFAddress [36]Gsm-SCFAddress OPTIONAL, serviceKey [37]ServiceKey OPTIONAL, networkCallReference [38]NetworkCallReference OPTIONAL, mSCAddress [39]MSCAddress OPTIONAL, defaultCallHandling [41]DefaultCallHandling OPTIONAL, numberOfDPEncountered [51]NumberOfDPEncountered OPTIONAL, levelOfCAMELService [52]LevelOfCAMELService OPTIONAL, cAMELCPHCallLegInformation [54]SEQUENCE OF CAMELCPHInformation OPTIONAL, freeFormatDataAppend [55]BOOLEAN OPTIONAL, -- NOT SUPPORT partialRecordType [69]PartialRecordType OPTIONAL, callSegmentId [101]CallSegmentId OPTIONAL, partSequenceNumber [102]LongPartSeqNumber OPTIONAL, globalCallReference [103]GlobalCallReference OPTIONAL, lastLongPartInd [104]NULL OPTIONAL,
ZTE Confidential Proprietary
Page 103 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 isCAMELCall
[105] NULL OPTIONAL
}
3.2
CDR Fields Structure
3.2.1
AdditionalChgInfo
5
AdditionalChgInfo ::= SEQUENCE { chargeIndicator chargedParty
[0] ChargeIndicator OPTIONAL, [1] ChargedParty OPTIONAL
}
103.2.2
AddressString AddressString ::= OCTET STRING (SIZE (1..maxAddressLength)) maxAddressLength INTEGER ::= 20 8 Octet 1
7
6
5
1 Nature Of Address ext Number digit 2 Number digit 4
Octet 2 Octet 3 Octet 4 .. ..
4
3
2
1
Numbering plan Indicator Number digit 1 Number digit 3
Nature of address indicator: Bits 7 6 0 0 0 0 0 1 0 1 1 0 1 0 1 1 1 1
5 0 1 0 1 0 1 0 1
unknown international number national significant number network specific number subscriber number reserved abbreviated number reserved for extension
The MSISDN TON of SMS may be 5, the number digit will be packed by 7-bit characters. See 4.1 for packing of 7-bit characters
15
Numbering plan indicator Bits 4 3 0 0 0 0 0 0 0 0 0 1 0 1 0 1 0 1 1 0 1 0 1 1
3.2.3
2 0 0 1 1 0 0 1 1 0 0 1
1 0 1 0 1 0 1 0 1 0 1 1
Unknown ISDN/telephony numbering plan (Rec. E.164) Spare data numbering plan (Recommendation X.121) telex numbering plan (Recommendation F.69) Spare land mobile numbering plan (CCITT Rec E.212) Spare national numbering plan private numbering plan reserved for extension
AiurRequested AiurRequested ::= ENUMERATED
ZTE Confidential Proprietary
Page 104 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
{ aiur09600BitsPerSecond aiur14400BitsPerSecond aiur19200BitsPerSecond aiur28800BitsPerSecond aiur38400BitsPerSecond aiur43200BitsPerSecond aiur57600BitsPerSecond aiur38400BitsPerSecond1 aiur38400BitsPerSecond2 aiur38400BitsPerSecond3 aiur38400BitsPerSecond4
5
10
(1), (2), (3), (5), (6), (7), (8), (9), (10), (11), (12)
}
3.2.4 15
AOCParameters AOCParameters::= SEQUENCE { e1 e2 e3 e4 e5 e6 e7
20
[1] EParameter OPTIONAL, [2] EParameter OPTIONAL, [3] EParameter OPTIONAL, [4] EParameter OPTIONAL, [5] EParameter OPTIONAL, [6] EParameter OPTIONAL, [7] EParameter OPTIONAL
}
253.2.5
AOCParmChange AOCParmChange ::= SEQUENCE { changeTime newParameters
30
[0] TimeStamp, [1] AOCParameters
}
3.2.6
AReleaseCause AReleaseCause ::= INTEGER Value(Hex) 0H 1H 2H 3H 4H 5H 6H 7H 8H 9H AH BH CH DH EH FH 10H
ZTE Confidential Proprietary
Meaning
Radio interface message failure Radio interface failure Uplink quality Uplink strength Downlink quality Downlink strength Distance O and M intervention Response to MSC invocation Call control Radio interface failure, reversion to old channel Handover successful Better Cell Directed Retry Joined group call channel Traffic Reduce load in serving cell
Page 105 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 11H 12H 13H 16H ~ 17H 18H ~ 1FH 20H 21H 22H 23H 24H 25H 26H 27H 28H 29H 2AH ~ 2FH 30H 31H 32H 33H 34H 35H ~ 3FH 40H 41H 42H 43H 44H ~ 47H 48H ~ 4FH 50H 51H 52H 53H 54H 55H 56H ~ 57H 58H ~ 5FH 60H 61H 62H ~ 67H 68H ~ 6FH 70H ~ 77H 78H ~ 7FH
3.2.7
Traffic load in target cell higher than in source cell Relocation triggered NOTE Alternative channel configuration requested (NOTE) Reserved for international use Reserved for national use Equipment failure No radio resource available Requested terrestrial resource unavailable CCCH overload Processor overload BSS not equipped MS not equipped Invalid cell Traffic Load Preemption Reserved for national use Requested transcoding/rate adaption unavailable Circuit pool mismatch Switch circuit pool Requested speech version unavailable LSA not allowed Reserved for international use Ciphering algorithm not supported GERAN Iu-mode failure Incoming Relocation Not Supported Due To PUESBINE Feature Access Restricted Due to Shared Networks (NOTE) Reserved for international use Reserved for national use Terrestrial circuit already allocated Invalid message contents Information element or field missing Incorrect value Unknown Message type Unknown Information Element Reserved for international use Reserved for national use Protocol Error between BSS and MSC VGCS/VBS call non existent Reserved for international use Reserved for national use Reserved for international use Reserved for national use
BasicServiceCode BasicServiceCode ::= CHOICE { bearerService teleservice
5
[3] BearerServiceCode, [2] TeleserviceCode
}
3.2.8
BasicServices BasicServices ::= SET OF BasicServiceCode
ZTE Confidential Proprietary
Page 106 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.9
BearerServiceCode BearerServiceCode ::= OCTET STRING (SIZE (1..2)) --- If the value is greater than 127, it will be encoded as 2 octets.
5
-- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved -- octet 2: the values listed below -Value Binary
Hexadecimal
‘00000000’B ‘00010000’B ‘00010001’B ‘00010010’B ‘00010011’B ‘00010100’B ‘00010101’B ‘00010110’B ‘00010111’B ‘00011000’B ‘00011010’B ‘00011100’B ‘00011101’B ‘00011110’B ‘00011111’B ‘00100000’B ‘00100001’B ‘00100010’B ‘00100011’B ‘00100100’B ‘00100101’B ‘00100110’B ‘00100111’B ‘00101000’B ‘00101100’B ‘00101101’B ‘00101110’B ‘00101111’B ‘00110000’B ‘00111000’B ‘01000000’B ‘01001000’B ‘01010000’B ‘01100000’B ‘01011000’B ‘01101000’B ‘11010000’B ‘11010001’B
0 10 11 12 13 14 15 16 17 18 1A 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 2C 2D 2E 2F 30 38 40 48 50 60 58 68 D0 D1
ZTE Confidential Proprietary
Meaning
All Bearer Services AllData CDA(Circuit Data Asynchronous)-Services Data CDA-300bps Data CDA-1200bps Data CDA-1200-75bps Data CDA-2400bps Data CDA-4800bps Data CDA-9600bps general-data CDA All Data CDS(Circuit Data Synchronous) –Services Data CDS-1200bps Data CDS-2400bps Data CDS-4800bps Data CDS-9600bps general-data CDS All Pad(Packed Assembly/Disassembly) Services Pad AccessCA-300bps Pad AccessCA-1200bps Pad AccessCA-1200-75bps Pad AccessCA-2400bps Pad AccessCA-4800bps Pad AccessCA-9600bps general-pad AccessCA All DataPDS-Services Data PDS-2400bps Data PDS-4800bps Data PDS-9600bps general-data PDS All Alternate Speech-Data CDA All Alternate Speech-Data CDS All Speech Followed By Data CDA All Speech Followed By Data CDS All Data Circuit Asynchronous All Asynchronous Services All Data Circuit Synchronous All SynchronousServices All PLMN-specificBS plmn-specific BS-1
Page 107 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 ‘11010010’B ‘11010011’B ‘11010100’B ‘11010101’B ‘11010110’B ‘11010111’B ‘11011000’B ‘11011001’B ‘11011010’B ‘11011011’B ‘11011100’B ‘11011101’B ‘11011110’B ‘11011111’B
3.2.10
D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF
plmn-specific BS-2 plmn-specific BS-3 plmn-specific BS-4 plmn-specific BS-5 plmn-specific BS-6 plmn-specific BS-7 plmn-specificBS-8 plmn-specificBS-9 plmn-specificBS-A plmn-specificBS-B plmn-specificBS-C plmn-specificBS-D plmn-specificBS-E plmn-specificBS-F
BCDDirectoryNumber BCDDirectoryNumber ::= OCTET STRING(SIZE(1..18)) 8 Octet 1
7
6
5
0/1 type of number ext 1 Present 0 Ext Indicator Spare Number digit 2 Number digit 4
Octet 2 Octet 3 Octet 4 Octet 5 .. ..
4
3
2
1
Numbering plan identification 0 0 Screening Indicator Number digit 1 Number digit 3
Type Of Number: Bits 7 6 0 0 0 0 0 1 0 1 1 0 1 0 1 1 1 1
5 0 1 0 1 0 1 0 1
unknown international number national number network specific number dedicated access, short code reserved reserved reserved for extension
The destinationNumber/ originationNumber TON of SMS may be 5, the number digit will be packed by 7-bit characters. See 4.1 for packing of 7-bit characters
5
If the bit8 of octet 1 is ‘1’, then octet 2 will be omitted. Numbering plan identification: Bits 4 3 0 0 0 0 0 0 0 1 1 0 1 0 1 0 1 1
2 0 0 1 0 0 0 1 1
1 0 1 1 0 0 1 1 1
Unknown ISDN/telephony numbering plan (Rec. E.164/E.163) data numbering plan (Recommendation X.121) telex numbering plan (Recommendation F.69) national numbering plan private numbering plan reserved for CTS (see GSM 04.56) reserved for extension
Number digits :
ZTE Confidential Proprietary
Page 108 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Bits 4 8 0 0 0 0 0 0 0 0 1 1
3 7 0 0 0 0 1 1 1 1 0 0
2 6 0 0 1 1 0 0 1 1 0 0
1 5 0 1 0 1 0 1 0 1 0 1
Number digit value
1 1 1 1 1 1
0 0 1 1 1 1
1 1 0 0 1 1
0 1 0 1 0 1
or 0 1 2 3 4 5 6 7 8 9 * # a b c used as an endmark in the case of an odd number of number digits
Presentation indicator： Bits 7 6 0 0 0 1 1 0 1 1
Presentation allowed Presentation restricted Number not available due to interworking Reserved
If Octet 2 is omitted, the value “00 – Presentation allowed” is assumed Screening indicator： Bits 2 1 0 0 0 1 1 0 1 1
User-provided, not screened User-provided, verified and passed User-provided, verified and failed Network provided
If octet 2 is omitted the value “00 – User provided, not screened” is assumed.
53.2.11
BillOrValidateFlag BillOrValidateFlag ::= ENUMERATED { billRecord validateRecord
10
(1), (2)
}
3.2.12
BSCIdentification BSCIdentification::= OCTET STRING (SIZE(2)) bit
8 spare
7
6
5 spc octet 1
4
3
2
1
8
7
6
5
4
sub
3
2
1
main octet 2
The octet 1 appears first in the coding stream,followed by octet 2. For example,if the spc14 is “7.4.5” , spccode=5, subspccode=4, maincode=7. the coding stream is 0x28 0x27
15
ZTE Confidential Proprietary
Page 109 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.13
BSCIdentification24 BSCIdentification24 ::= OCTET STRING (SIZE(3)) bit octet1 octet2 octet3
3.2.14
8
7
6
5 4 main sub spc
3
2
1
CallDuration CallDuration ::= INTEGER
53.2.15
CalledNumber CalledNumber ::= BCDDirectoryNumber
3.2.16
CalledPartyNumber CalledPartyNumber ::= BCDDirectoryNumber
3.2.17 10
CallEventRecordType CallEventRecordType ::= INTEGER { moCallRecord mtCallRecord roamingRecord incGatewayRecord outGatewayRecord transitCallRecord moSMSRecord mtSMSRecord ssActionRecord hlrIntRecord moeCallRecord mcfCallRecord commonEquipRecord termCAMELIntRecord mtLCSRecord moLCSRecord niLCSRecord moCPHRecord mcfCPHRecord tciCPHRecord gsiCPHRecord ncsCPHRecord sigMTPStatisticRecord sigSCCPStatisticRecord uSSDRecord vIGRecord
15
20
25
30
35
(0), (1), (2), (3), (4), (5), (6), (7), (10), (11), (12), (13), (14), (17), (23), (24), (25), (36), (37), (38), (39), (40), (41), (42), (43), (44),
}
3.2.18 40
CallingNum CallingNum ::= ISDN-AddressString
3.2.19
CallingNumber CallingNumber ::= BCDDirectoryNumber
3.2.20
CallingPartyCategory CallingPartyCategory::= Category
ZTE Confidential Proprietary
Page 110 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.21
CallSegmentId CallSegmentId ::= INTEGER(0..255)
3.2.22
CallReference CallReference ::= OCTET STRING(SIZE(1..5)) 8 Octet 1 Octet 2 Octet 3 Octet 4 Octet 5
53.2.23
7
6
5
(MSB) SeqNo SeqNo Continue SeqNo Continue SeqNo Continue SeqNo Continue
4
3
2
1
(LSB)
CAMELDestinationNumber CAMELDestinationNumber ::= DestinationRoutingAddress
3.2.24
CAMELInformation CAMELInformation ::= SEQUENCE { cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification freeFormatData diagnostics freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration
10
15
20
25
[1] CAMELDestinationNumber OPTIONAL, [2] ConnectedNumber OPTIONAL, [3] RoamingNumber OPTIONAL, [4] TrunkGroup OPTIONAL, [5] TimeStamp OPTIONAL, [6] TimeStamp OPTIONAL, [7] TimeStamp OPTIONAL, [8] CallDuration OPTIONAL, [9] DataVolume OPTIONAL, [10] CAMELInitCFIndicator OPTIONAL, [11] CauseForTerm OPTIONAL, [12] ChangedParameters OPTIONAL, [13] FreeFormatData OPTIONAL, [14] Diagnostics OPTIONAL, [15] BOOLEAN OPTIONAL, [16] FreeFormatData OPTIONAL, [17] BOOLEAN OPTIONAL, [18]CallDuration OPTIONAL
}
3.2.25 30
CAMELInitCFIndicator CAMELInitCFIndicator ::= ENUMERATED { noCAMELCallForwarding cAMELCallForwarding
(0), (1)
}
353.2.26
CAMELModificationParameters CAMELModificationParameters::= SEQUENCE {
40
callingPartyNumber callingPartyCategory originalCalledPartyNumber genericNumbers redirectingPartyNumber
ZTE Confidential Proprietary
[0] CallingNumber OPTIONAL, [1] CallingPartyCategory OPTIONAL, [2] OriginalCalledNumber OPTIONAL, [3] GenericNumbers OPTIONAL, [4] RedirectingNumber OPTIONAL,
Page 111 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 redirectionCounter
[5] NumberOfForwarding OPTIONAL
}
3.2.27
CAMELSMSInformation CAMELSMSInformation::= SEQUENCE
5
{ gsm-SCFAddress serviceKey defaultSMSHandling freeFormatData callingPartyNumber destinationSubscriberNumber cAMELSMSCAddress smsRefrenceNumber
10
[1] Gsm-SCFAddress OPTIONAL, [2] ServiceKey OPTIONAL, [3] DefaultSMS-Handling OPTIONAL, [4] FreeFormatData OPTIONAL, [5] CallingNumber OPTIONAL, [6] CalledNumber OPTIONAL, [7] AddressString OPTIONAL, [8] INTEGER OPTIONAL
}
153.2.28
CAMELCPHInformation CAMELCPHInformation ::= SEQUENCE { cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification additionalChgInfo translatedNumber diagnostics freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration
20
25
30
35
40
[1] CAMELDestinationNumber OPTIONAL, [2] ConnectedNumber OPTIONAL, [3] RoamingNumber OPTIONAL, [4] TrunkGroup OPTIONAL, [5] TimeStamp OPTIONAL, [6] TimeStamp OPTIONAL, [7] TimeStamp OPTIONAL, [8] CallDuration OPTIONAL, [9] DataVolume OPTIONAL, [10] CAMELInitCFIndicator OPTIONAL, [11] CauseForTerm OPTIONAL, [12] ChangedParameters OPTIONAL, [13] AdditionalChgInfo OPTIONAL, [14] TranslatedNumber OPTIONAL, [15] Diagnostics OPTIONAL, [16] FreeFormatData OPTIONAL, [17] BOOLEAN OPTIONAL, [18] Gsm-SCFAddress OPTIONAL, [19] ServiceKey OPTIONAL, [20] DefaultCallHandling OPTIONAL, [21] FreeFormatData OPTIONAL, [22] BOOLEAN OPTIONAL, [23]FreeFormatData OPTIONAL, [24]BOOLEAN OPTIONAL, [25]BOOLEAN OPTIONAL, [26]CallDuration OPTIONAL
}
453.2.29
Carp Carp::=INTEGER
3.2.30
Category Category ::= OCTET STRING (SIZE(1..2)) --
50
-- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2.
ZTE Confidential Proprietary
Page 112 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
-- octet 1: 0 -- reserved -- octet 2: the values listed below --
53.2.31
Value Binary
Decimal
Meaning
00000000 00000001 00000010 00000011 00000100 00000101 00000110
0 1 2 3 4 5 6
00000111
7
00001000
8
00001001 00001010 00001011 00001100 00001101 00001110 00001111 00010000 to 11011111
9 10 11 12 13 14 15 16 to 223
11110000
240
Common calling subscriber, free
11110001
241
11110010
242
11110011
243
Common calling subscriber, pay in regular period Common calling subscriber, list of subscribers, instant Common calling subscriber, printer, instant
11110100
244
Preferred calling subscriber, free
11110101
245
11111111
255
Preferred calling subscriber, pay in regular period Idle
Unknown Operator, French Operator, English Operator, German Operator, Russian Operator, Spanish Language adopted by both parties through negotiation, Chinese Language adopted by both parties through negotiation Language adopted by both parties through negotiation, Japanese National operator Common calling subscriber Preferred calling subscriber Data service call Test call Idle Payphone Idle
CauseForTerm CauseForTerm ::= ENUMERATED { normalRelease partialRecord partialRecordCallReestablishment unsuccessfulCallAttempt stableCallAbnormalTermination cAMELInitCallRelease unauthorizedRequestingNetwork unauthorizedLCSClient positionMethodFailure unknownOrUnreachableLCSClient cAMELPlayTone changeOfConfDueToCPH falseAnswerCharge failPlayTone releaseForPreemption
10
15
20
(0), (1), (2), (3), (4), (5), (52), (53), (54), (58), (101), (102), (103), (104), (105)
}
ZTE Confidential Proprietary
Page 113 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.32
ChangedParameters ChangedParameters ::= SEQUENCE { changeFlags changeList
5
[0] ChangeFlags, [1] CAMELModificationParameters OPTIONAL
}
3.2.33
ChangeFlags ChangeFlags ::= BIT STRING { callingPartyNumberModified callingPartyCategoryModified originalCalledPartyNumberModified (2), genericNumbersModified redirectingPartyNumberModified redirectionCounterModified
10
15
(0), (1), (3), (4), (5)
}
3.2.34
ChangeOfClassmark ChangeOfClassmark ::= SEQUENCE { classmark changeTime
20
[0] Classmark, [1] TimeStamp
}
3.2.35
ChangeOfRadioChannel ChangeOfRadioChannel ::= SEQUENCE
25
{ radioChannel changeTime speechVersionUsed
[0] TrafficChannel, [1] TimeStamp, [2] SpeechVersionIdentifier OPTIONAL -- NOT SUPPORT
}
303.2.36
ChangeOfService ChangeOfService ::= SEQUENCE { basicService transparencyIndicator changeTime
35
[0] BasicServiceCode, [1] TransparencyInd OPTIONAL, -- NOT SUPPORT [2] TimeStamp
}
3.2.37
ChannelCoding ChannelCoding ::= ENUMERATED { tchF4800 tchF9600 tchF14400
40
(1), (2), (3)
}
ZTE Confidential Proprietary
Page 114 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.38
ChargeIndicator ChargeIndicator ::= INTEGER { noCharge Charge
5
(0), (1)
}
3.2.39
ChargedParty ChargedParty ::= ENUMERATED { CallingAsChargedParty CalledAsChargedParty NoCharging AnotherNumAsChargedParty
10
(0), (1), (2), (3)
}
153.2.40
CICCode CICCode ::= SEQUENCE { pcmUnit channel
20
[0] INTEGER, [1] INTEGER
}
3.2.41
Classmark Classmark ::= OCTET STRING(SIZE(1..3)) Octet 1 Octet 2 Octet 3
3.2.42
8 0 spare 0 spare
7 6 5 Revision ES level IND PS SS Screen. capa. Indicator
4 A5/1
CM3
0 spare
SoLSA
LCSVA CAP
UCS 2
SM capabi.
ConnectedNumber ConnectedNumber::= BCDDirectoryNumber
253.2.43
CUGCategory CUGCategory ::= SEQUENCE { callType userType
30
[0] INTEGER, [1] INTEGER
}
3.2.44
CUGIndex CUGIndex::= INTEGER
ZTE Confidential Proprietary
Page 115 of 204
3 2 RF power capability VBS VGC S
1
CMS P
A5/2
A5/3
FC
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.45
CUGInterLockCode CUGInterLockCode ::= OCTET STRING(SIZE(1..4))
3.2.46
DataRate DataRate ::= INTEGER
53.2.47
DataVolume DataVolume ::= INTEGER
3.2.48
DDCFlag DDCFlag::= INTEGER { notuseDDC useDDC
10
(0), (1)
}
3.2.49
DefaultCallHandling DefaultCallHandling ::= ENUMERATED
15
{ continueCall releaseCall
(0), (1)
}
3.2.50 20
DefaultSMS-Handling DefaultSMS-Handling ::= ENUMERATED { continueTransaction releaseTransaction
(0) , (1)
}
253.2.51
DeferredLocationEventType DeferredLocationEventType ::= BIT STRING { msAvailable
(0)
} (SIZE (1..16))
303.2.52
DestinationRoutingAddress DestinationRoutingAddress ::= CalledPartyNumber
3.2.53
Diagnostics Diagnostics ::= CHOICE {
35
40
gsm0408Cause [0] INTEGER, -- See TS 24.008 gsm0902MapErrorValue [1] INTEGER, -- Note: The value to be stored here corresponds to -- the local values defined in the MAP-Errors and -- MAP-DialogueInformation modules, for full details
ZTE Confidential Proprietary
Page 116 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 -- see TS 29.002. ccittQ767Cause -- See ITU-T Q.767 networkSpecificCause -- To be defined by network operator manufacturerSpecificCause -- To be defined by manufacturer
5
[2] INTEGER, [3] ManagementExtensions, [4] ManagementExtensions
} Value of gsm0902MapErrorValue: Value(Dec) 5 6 9 12 21 31 32 34 35 36
10
Description unidentifiedSubscriber absentSubscriberSM illegalSubscriber illegalEquipment facilityNotSupported subscriberBusyForMT-SMS sm-DeliveryFailure systemFailure dataMissing unexpectedDataValue
networkSpecificCause = Fail type + Q850 cause Value of Fail type: Value(Dec) 0 256 512 768
Value(Hex) 0 100 200 300
Description Release from the front office Release from the back office Original Release in the local office Terminal Release in the local office
Value of Q850 cause: Value(Dec) 1 2 3 4 5 6 7 8 9 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 34 38 39 40 41 42 43
ZTE Confidential Proprietary
Description Unallocated number No route to specified transit network No route to destination Send special information tone Misdialled trunk prefix Channel unacceptable Call awarded and being delivered in an established channel Preemption Preemption – circuit reserved for reuse Share number failure for IGW Normal call clearing User busy No user responding No answer from user (user alerted) Subscriber absent Call rejected Number changed Redirection to new destination Exchange – routing error Non-selected user clearing Destination out of order Invalid number format (address incomplete) Facility rejected Response to STATUS ENQUIRY Normal, unspecified No circuit/channel available Network out of order Permanent frame mode connection out of service Permanent frame mode connection operational Temporary failure Switching equipment congestion Access information discarded
Page 117 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 44 46 47 49 50 53 55 57 58 62 63 65 66 69 70 79 81 82 83 84 85 86 87 88 90 91 95 96 97 98 99 100 101 102 103 109 110 111 127
Requested circuit/channel not available Precedence call blocked Resource unavailable, unspecified Quality of service unavailable Requested facility not subscribed Outgoing calls barred within CUG Incoming calls barred within CUG Bearer capability not authorized Bearer capability not presently available Inconsistency in designated outgoing access information and subscriber class Service or option not available, unspecified Bearer capability not implemented Channel type not implemented Requested facility not implemented Only restricted digital information bearer capability is available Service or option not implemented, unspecified Invalid call reference value Identified channel does not exist A suspended call exists, but this call identity does not Call identity in use No call suspended Call having the requested call identity has been cleared User not member of CUG Incompatible destination Non-existent CUG Invalid transit network selection Invalid message, unspecified Mandatory information element is missing Message type non-existent or not implemented Message not compatible with call state or message type non-existent or not implemented Information element /parameter non-existent or not implemented Invalid information element contents Message not compatible with call state Recovery on timer expiry Parameter non-existent or not implemented, passed on Message unexpected Message with unrecognized parameter, discarded Protocol error, unspecified Interworking, unspecified
ccittQ767Cause value: Value(Dec) Description Normal Class 1 Unassigned/unallocated number 3 No route to destination 4 Send special information tone) 6 Channel unacceptable 8 Operator determined barring 16 Normal call clearing 17 User busy 18 No user responding 19 User alerting, no answer 21 Call rejected 22 Number changed 26 Non-selected user clearing<--not supported 27 Destination out of order 28 Invalid number format or incomplete number 29 Facility rejected 30 Response to STATUS ENQUIRY 31 Normal,unspecified Resource unavailable class 34 No circuit/channel available
ZTE Confidential Proprietary
Page 118 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 38 Network out of order 41 Temporary failure 42 Switching equipment congestion 43 (Access © discarded 44 Requested circuit/channel not available 47 Resource unavailable,unspecified Service or option not available class 49 Quaity of service unavailable 50 Requested facility not subscribed 55 Incoming calls barred within the CUG 57 Bearer capability not authorized 58 Bearer capability not presenty available 63 Service or option not available,unspecified Service or option not implemented class 65 Bearer service not implemented 68 ACM equal to or greater than ACMmax 69 Requested facility not implemented 70 Only restricted digital information bearer capability is available 71 Service or option not implemented,unspecified Invalid message class 81 Invalid transaction identifier value 87 called user not member of CUG 88 Incompatible destination 91 Invalid transit network selection 95 Semantically incorrect message Protocol error class 96 Invalid mandatory information(3GPP) 97 Invalid 119ontransp information,Message type nonexistent or not implemented 98 Message type non-existent or not implemented,Parameter not existent or not implemented discarded 99 Message type not compatible with 119ontrans state 100 Information element no-existent or not implemented;3GPP，conditional IE error 101 Condiional IE error 102 Message not compatible with protocol state,Recovery on timer expiry 103 Recovery on timer expiry,Parameter nonexistent or not implemented passed on 111 Protocol error,unspecified Interworking class 127 Interworking,unspecified
3.2.54
DirectSMSFlag DirectSMSFlag ::= INTEGER {
5
normalShortMessage
(0),
directShortMessage
(1)
}
3.2.55
EMLPPPriorityLevel EMLPPPriorityLevel ::= INTEGER
103.2.56
EMLPPRequestPriorityLevel EMLPPRequestPriorityLevel ::= INTEGER
3.2.57
Eparameter EParameter::= INTEGER
ZTE Confidential Proprietary
Page 119 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.58
EquipmentId EquipmentId ::= INTEGER
3.2.59
EquipmentType EquipmentType::= INTEGER
5
{ conferenceBridge (0)
}
3.2.60
Ext-GeographicalInformation Ext-GeographicalInformation GeographicalInformation))
10
::=
OCTET
STRING
maxExt-GeographicalInformation INTEGER ::= 91
3.2.61
Fnur Fnur ::= ENUMERATED { Fnur9600-BitsPerSecond Fnur14400BitsPerSecond Fnur19200BitsPerSecond Fnur28800BitsPerSecond Fnur38400BitsPerSecond Fnur48000BitsPerSecond Fnur56000BitsPerSecond Fnur64000BitsPerSecond Fnur33600BitsPerSecond Fnur32000BitsPerSecond Fnur31200BitsPerSecond
15
20
25
(1), (2), (3), (4), (5), (6), (7), (8), (9), (10), (11)
}
3.2.62
ForwardCallIndicator ForwardCallIndicator ::= ENUMERATED { nationalIncoming (0), internationalIncoming (1), unknown (255)
30
}
3.2.63 35
ForwardedSubNumber ForwardedSubNumber::= AddressString
3.2.64
ForwardToNumber ForwardToNumber ::= AddressString
3.2.65
FreeFormatData FreeFormatData ::= OCTET STRING (SIZE(1..160))
403.2.66
GatewayRecordType GatewayRecordType ::= ENUMERATED
ZTE Confidential Proprietary
Page 120 of 204
(SIZE
(1..maxExt-
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
{ gatewayRecord
(0), (1), (2)
trunkRecord sipRecord 5
3.2.67
}
GenericNumber GenericNumber ::= BCDDirectoryNumber
3.2.68
GenericNumbers GenericNumbers ::= SET OF GenericNumber
103.2.69
GlobalCallReference GlobalCallReference ::= OCTET STRING (SIZE(6..24))
3.2.70
Gsm-SCFAddress Gsm-SCFAddress ::= ISDN-AddressString
3.2.71 15
GuaranteedBitRate GuaranteedBitRate ::= ENUMERATED {
20
25
gBR14400BitsPerSecond (1), gBR28800BitsPerSecond (2), gBR32000BitsPerSecond (3), gBR33600BitsPerSecond (4), gBR56000BitsPerSecond (5), gBR57600BitsPerSecond (6), gBR64000BitsPerSecond (7), gBR31200BitsPerSecond (8), gBR38400BitsPerSecond (9)
}
3.2.72
HLRIntResult HLRIntResult ::= Diagnostics
3.2.73 30
HotBillingTag HotBillingTag::= INTEGER { noHotBilling HotBilling
(0), (1)
}
353.2.74
HotBillingTag2 HotBillingTag2::= INTEGER { postPayed prePaied
40
(0), (1)
}
ZTE Confidential Proprietary
Page 121 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.75
HSCSDParmsChange HSCSDParmsChange ::= SEQUENCE { changeTime hSCSDChanAllocated initiatingParty aiurRequested chanCodingUsed hSCSDChanRequested
5
10
[0] TimeStamp, [1] NumOfHSCSDChanAllocated, [2] InitiatingParty OPTIONAL, [3] AiurRequested OPTIONAL, [4] ChannelCoding, [5] NumOfHSCSDChanRequested OPTIONAL
}
3.2.76
IMEI IMEI ::= TBCD-STRING (SIZE (1..8))
3.2.77
IMSI IMSI ::= TBCD-STRING (SIZE (1..8))
153.2.78
InitiatingParty InitiatingParty::= ENUMERATED { network subscriber
20
(0), (1)
}
3.2.79
InterOperatorIdentifiers InterOperatorIdentifiers ::= SEQUENCE { originatingIOI terminatingIOI
25
[0] GraphicString OPTIONAL, [1] GraphicString OPTIONAL
}
3.2.80
IPAddress IPAddress ::= CHOICE { iPBinaryAddress iPTextRepresentedAddress
30
IPBinaryAddress, IPTextRepresentedAddress
}
3.2.81
IPBinaryAddress IPBinaryAddress ::= CHOICE
35
{ iPBinV4Address iPBinV6Address
[0] OCTET STRING (SIZE(4)), [1] OCTET STRING (SIZE(16))
}
3.2.82 40
IPTextRepresentedAddress IPTextRepresentedAddress ::= CHOICE {
ZTE Confidential Proprietary
Page 122 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 iPTextV4Address iPTextV6Address
[2] IA5String (SIZE(7..15)), [3] IA5String (SIZE(15..45))
}
3.2.83 5
ISDN-AddressString ISDN-AddressString ::= AddressString (SIZE (1..maxISDN-AddressLength)) maxISDN-AddressLength INTEGER ::= 9
3.2.84
ISDN-SubaddressString ISDN-SubaddressString SubaddressLength))
10
::=
OCTET
STRING
(SIZE
(1..maxISDN-
maxISDN-SubaddressLength INTEGER ::= 21 8 Octet 1 Octet 2 Octet 3 Octet 4 .. ..
7
6
5
1 type of subaddress ext Number digit 2 Number digit 4
4
3
2
1
O/ 0 0 E Un Used Number digit 1 Number digit 3
0
type of subaddress: Bits 7 6 0 0 0 1
5 0 0
NSAP (X.213/ISO 8348 AD2) User Specified
odd/even indicator： Bits 4 0 1
3.2.85
even number of address signals odd number of address signals
IuReleaseCause IuReleaseCause ::= INTEGER Value(Hex) 1H 2H 3H 4H 5H 6H 7H 8H 9H AH BH CH DH EH FH 10H
ZTE Confidential Proprietary
Meaning
RAB pre-empted Trelocoverall Expiry Trelocprep Expiry Treloccomplete Expiry Tqueuing Expiry Relocation Triggered TRELOCalloc Expiry Unable to Establish During Relocation Unknown Target RNC Relocation Cancelled Successful Relocation Requested Ciphering and/or Integrity Protection Algorithms not Supported Conflict with already existing Integrity protection and/or Ciphering information Failure in the Radio Interface Procedure Release due to UTRAN Generated Reason User Inactivity
Page 123 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 11H 12H 13H 14H 21H 22H 15H 23H 24H 16H 17H 18H 19H 1AH 1BH 1CH 1DH 1EH 1FH 20H 25H 26H 27H 28H 29H 2AH 2BH 2CH 2DH 2EH 2FH 30H 31H 32H 33H 34H 35H 36H 37H 38H 39H 3AH 3BH 3CH 3DH 3EH 3FH 41H 51H 52H 61H 62H 63H 64H
ZTE Confidential Proprietary
Time Critical Relocation Requested Traffic Class not Available Invalid RAB Parameters Value Requested Maximum Bit Rate not Available Requested Maximum Bit Rate for DL not Available Requested Maximum Bit Rate for UL not Available Requested Guaranteed Bit Rate not Available Requested Guaranteed Bit Rate for DL not Available Requested Guaranteed Bit Rate for UL not Available Requested Transfer Delay not Achievable Invalid RAB Parameters Combination Condition Violation for SDU Parameters Condition Violation for Traffic Handling Priority Condition Violation for Guaranteed Bit Rate User Plane Versions not Supported Iu UP Failure Relocation Failure in Target CN/RNC or Target System Invalid RAB ID No remaining RAB Interaction with other procedure Repeated Integrity Checking Failure Requested Request Type not supported Request superseded Release due to UE generated signalling connection release Resource Optimisation Relocation Requested Information Not Available Relocation desirable for radio reasons Relocation not supported in Target RNC or Target system Directed Retry Radio Connection With UE Lost RNC unable to establish all RFCs Deciphering Keys Not Available Dedicated Assistance data Not Available Relocation Target not allowed Location Reporting Congestion Reduce Load in Serving Cell No Radio Resources Available in Target cell GERAN Iu-mode failure Access Restricted Due to Shared Networks Incoming Relocation Not Supported Due To PUESBINE Feature Traffic Load In The Target Cell Higher Than In The Source Cell MBMS - No Multicast Service For This UE MBMS - Unknown UE ID Successful MBMS Session Start - No Data Bearer Necessary MBMS - Superseded Due To NNSF MBMS - UE Linking Already Done MBMS - UE De-Linking Failure - No Existing UE Linking Signalling Transport Resource Failure User Restriction Start Indication User Restriction End Indication Transfer Syntax Error Semantic Error Message not compatible with receiver state Abstract Syntax Error -Reject
Page 124 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 65H 71H 72H 73H 101H 102H 103H 104H
3.2.86
Abstract Syntax Error -Ignore and Notify O&M Intervention No Resource Available Unspecified Failure IP Multicast Address And APN Not Valid MBMS De-Registration Rejected Due To Implicit Registration MBMS - Request Superseded MBMS De-Registration During Session Not Allowed
LCSCause LCSCause ::= OCTET STRING (SIZE(1..2)) --- If the value is greater than 127, it will be encoded as 2 octets.
5
-- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved -- octet 2: the values listed below -LCS Cause value (octet 3) Bits 87654321 0 0 0 0 0 0 0 0 Unspecified 0 0 0 0 0 0 0 1 System Failure 0 0 0 0 0 0 1 0 Protocol Error 0 0 0 0 0 0 1 1 Data missing in position request 0 0 0 0 0 1 0 0 Unexpected data value in position request 0 0 0 0 0 1 0 1 Position method failure 0 0 0 0 0 1 1 0 Target MS Unreachable 0 0 0 0 0 1 1 1 Location request aborted 0 0 0 0 1 0 0 0 Facility not supported 0 0 0 0 1 0 0 1 Inter-BSC Handover Ongoing 0 0 0 0 1 0 1 0 Intra-BSC Handover Complete 0 0 0 0 1 0 1 1 Congestion 00001100 to unspecified in this version of the protocol 11111111
3.2.87 10
LCSClientExternalID LCSClientExternalID ::= SEQUENCE { externalAddress
[0] AddressString OPTIONAL
}
3.2.88 15
LCSClientInternalID LCSClientInternalID ::= ENUMERATED { broadcastService o-andM-HPLMN o-andM-VPLMN anonymousLocation targetMSsubscribedService (4)
20
(0), (1), (2), (3),
}
ZTE Confidential Proprietary
Page 125 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.89
LCSClientIdentity LCSClientIdentity::= SEQUENCE { lcsClientExternalID lcsClientDialedByMS lcsClientInternalID
5
[0] LCSClientExternalID OPTIONAL, [1] AddressString OPTIONAL, [2] LCSClientInternalID OPTIONAL
}
3.2.90
LCSClientType LCSClientType ::= ENUMERATED
10
{ emergencyServices valueAddedServices plmnOperatorServices lawfulInterceptServices
15
(0), (1), (2), (3)
}
3.2.91
LCS-Priority LCS-Priority ::= OCTET STRING (SIZE (1))
20
3.2.92
-- 0 = highest priority -- 1 = normal priority -- all other values treated as 1
LCSQoSInfo LCSQoSInfo::= OCTET STRING (SIZE(4)) Octet 1 Octet 2 Octet 3 Octet 4
8 Spare HA VA RT
7
6
5
4
3
2
1 VERT
Horizontal Accuracy Vertical Accuracy Spare
Octet 1 25
VERT = vertical coordinate indicator 0 : vertical coordinate not requested 1 : vertical coordinate is requested
Octet 2 bit 8 30
HA = horizontal accuracy indicator 0 : Horizontal Accuracy is not specified 1 : Horizontal Accuracy is specified bits 7-1 Horizontal Accuracy : spare (set all zeroes) if HA=0 set to 7 bit uncertainty code in 3GPP TS 23.032 if HA=1
Octet 3 – applicable only if VERT = 1 35
40
bit 8
VA = vertical accuracy indicator 0 : Vertical Accuracy is not specified 1 : Vertical Accuracy is specified bits 7-1 Vertical Accuracy : spare (set all zeroes) if VA=0 set to 7 bit uncertainty altitude code in 3GPP TS 23.032 if VA=1
Octet 4 bits 8-7 RT = response time category 00 : Response Time is not specified 01 : Low Delay
ZTE Confidential Proprietary
Page 126 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 10 : Delay Tolerant 11 : reserved bits 6-1 spare
3.2.93 5
LevelOfCAMELService LevelOfCAMELService::= BIT STRING { basic callDurationSupervision onlineCharging
10
(0), (1), (2)
}
3.2.94
LocationAreaAndCell LocationAreaAndCell ::= SEQUENCE { locationArea rncID
15
[0] LocationAreaCode, [1] RncId OPTIONAL
}
3.2.95
LocationAreaCode LocationAreaCode ::= OCTET STRING (SIZE(9)) 8 Octet 1 Octet 2 Octet 3 Octet 4 Octet 5 Octet 6 Octet 7 Octet 8 Octet 9
3.2.96 20
7
6
5
MCC digit 2 MNC digit 3 MNC digit 2 (MSB) LAC LAC Continue (MSB) CI CI Continue (MSB) SAC SAC Continue
4
3
2
MCC digit 1 MCC digit 3 MNC digit 1 (LSB) (LSB) (LSB)
LocationChange LocationChange
::= SEQUENCE
{ location changeTime
[0] LocationAreaAndCell, [1] TimeStamp
}
253.2.97
LocationEstimateType LocationEstimateType ::= ENUMERATED { currentLocation currentOrLastKnownLocation initialLocation activateDeferredLocation cancelDeferredLocation
30
(0), (1), (2), (3), (4)
}
ZTE Confidential Proprietary
Page 127 of 204
1
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.98
LocationCellExtension LocationCellExtension ::= BIT STRING (SIZE (12))
3.2.99
LocationType LocationType ::= SEQUENCE
5
{ locationEstimateType [0] LocationEstimateType, deferredLocationEventType [1] DeferredLocationEventType OPTIONAL
}
3.2.100 10
LongPartSeqNumber LongPartSeqNumber ::= INTEGER
3.2.101
ManagementExtensions ManagementExtensions ::=INTEGER
3.2.102
MaximumBitRate MaximumBitRate ::= ENUMERATED
15
{ mBR14400BitsPerSecond (1), mBR28800BitsPerSecond (2), mBR32000BitsPerSecond (3), mBR33600BitsPerSecond (4), mBR56000BitsPerSecond (5), mBR57600BitsPerSecond (6), mBR64000BitsPerSecond (7), mBR67200BitsPerSecond (8)
20
}
253.2.103
McfType McfType ::= ENUMERATED {
30
unconditional busy notReply notReachable
(0),
callBack
(254)
(1), (2), (3),
}
353.2.104
MessageReference MessageReference::= OCTET STRING(SIZE(1..10))
3.2.105
MOLR-Type MOLR-Type::= ENUMERATED { locationEstimate assistanceData deCipheringKeys
40
(0), (1), (2)
}
ZTE Confidential Proprietary
Page 128 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.106
MSCAddress MSCAddress::= AddressString
3.2.107
MSISDN MSISDN::= ISDN-AddressString
53.2.108
MTPServiceIdentifier MTPServiceIdentifier::= ENUMERATED { managementMessage (0), maintenanceAndTestMessage (1), ansiTestingMessage (2), sccpMessage (3), tupMessage (4), isupMessage (5), DataUserPartCallAndCircuitRelatedMessages (6), DataUserPartFacilityRegistrationAndCancellationMessages OMAPMT (8), BSSAP (9), PCA (10), ALCAP (12), BICC (13), H248 (14)
10
15
20
(7),
}
3.2.109
NetworkCallReference NetworkCallReference::= OCTET STRING (SIZE (1..8))
253.2.110
NoReplyCondTime NoReplyCondTime::=INTEGER
3.2.111
NotificationToMSUser NotificationToMSUser ::= ENUMERATED { notifyLocationAllowed notifyAndVerify-LocationAllowedIfNoResponse notifyAndVerify-LocationNotAllowedIfNoResponse locationNotAllowed
30
(0), (1),
}
353.2.112
NumberOfDPEncountered NumberOfDPEncountered ::= INTEGER
3.2.113
NumberOfForwarding NumberOfForwarding::= INTEGER
3.2.114 40
NumOfHSCSDChanAllocated NumOfHSCSDChanAllocated ::= INTEGER
3.2.115
NumOfHSCSDChanRequested NumOfHSCSDChanRequested::= INTEGER
ZTE Confidential Proprietary
Page 129 of 204
(2), (3)
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.116
OriginalCalledNumber OriginalCalledNumber ::= BCDDirectoryNumber
3.2.117
PartialRecordType PartialRecordType::= ENUMERATED
5
{ serviceChange (1) }
3.2.118
Pbrt Pbrt::=INTEGER Value Binary ‘000 0000’B
Decimal 0
‘000 0001’B
1
Description Service of “Coloring Ring Back Tone “ is not applied in this call Service of “Coloring Ring Back Tone “ is applied in this call
10
3.2.119
PlmnId PlmnId ::= OCTET STRING (SIZE(3))
3.2.120
PositioningData PositioningData::= OCTET STRING (SIZE(1..33))
15
--- See Positioning Data IE (octet 3..n), 3GPP TS 49.031 -Octet 1 spare Positioning Data Discriminator Octets 2-2+m Positioning Method 1 Octets ..-2+nm
Positioning Method n
The positioning data discrminator (bits 4-1 of octet 1) defines the type of data provided for each positioning method: 20
SSS indicate usage of each positioning method that was attempted either successfully or unsuccessfully all other values are reserved
Coding of the postioning method octets for positioning data discrminator = 0: Octet x
positioning method
usage
Coding of positioning method (bits 8-4): 25
30
35
00000 00001 00010 00011 00100 00101 00110 00111 01000 to 01111 10000 to 11111
Timing Advance Reserved ( Note) Reserved ( Note) Mobile Assisted E-OTD Mobile Based E-OTD Mobile Assisted GPS Mobile Based GPS Conventional GPS reserved for GSM reserved for network specific positioning methods
ZTE Confidential Proprietary
Page 130 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Coding of usage (bits 3-1) 000 001 010 011 100
5
Attempted unsuccessfully due to failure or interruption Attempted successfully: results not used to generate location Attempted successfully: results used to verify but not generate location Attempted successfully: results used to generate location Attempted successfully: case where MS supports multiple mobile based positioning methods and the actual method or methods used by the MS cannot be determined
NOTE: These values of the codepoints shall not be used as they were used in an earlier version of the protocol.
103.2.121
RadioChanRequested RadioChanRequested ::= ENUMERATED { halfRateChannel fullRateChannel dualHalfRatePreferred dualFullRatePreferred
15
(0), (1), (2), (3)
}
3.2.122
RateIndication RateIndication::= OCTET STRING(SIZE(1)) --0x01=V.110-I.460/X.30RateAdaptation --0x02=ITU-T-X.31FlagStuffing --0x03=V.120 --0x07=H.223&H.245 --0x0B=PIAFS --0x0F=Not Used
20
25
3.2.123
RecordingEntity RecordingEntity::= AddressString
3.2.124
ReasonForServiceChange ReasonForServiceChange::= ENUMERATED
30
{ msubInitiate (0), mscInitiated (1), callSetupFallBack callSetupChangeOrder
35
(2), (3)
}
3.2.125
RecordSeqNumber RecordSeqNumber ::= OCTET STRING(SIZE (3)) 8 Octet 1
7
6
5
4
(MSB)
Octet 2 Octet 3
(LSB)
Value range: H’000000 ~ H’FFFFFF
3.2.126 40
RedirectingNumber RedirectingNumber ::= BCDDirectoryNumber
ZTE Confidential Proprietary
Page 131 of 204
3
2
1
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.2.127
RncID RncId::= SEQUENCE { plmnId rncId
5
[0] PlmnId, [1] INTEGER
}
3.2.128
RoamCamelInfomation RoamCamelInfomation::= SEQUENCE
10
{ interrogationTime destRouteNumber gsm-SCFAddress serviceKey mSCAddress defaultCallHandling
15
[0] TimeStamp OPTIONAL, [1] AddressString OPTIONAL, [2] Gsm-SCFAddress OPTIONAL, [3] ServiceKey OPTIONAL, [4] MSCAddress OPTIONAL, [5] DefaultCallHandling OPTIONAL
}
3.2.129 20
RoamingNumber RoamingNumber ::= ISDN-AddressString
3.2.130
RoutingCategory RoutingCategory ::= OCTET STRING(SIZE(1))
3.2.131
RoutingNumber RoutingNumber ::= CHOICE
25
{ roaming forwarded
[1] RoamingNumber, [2] ForwardToNumber
}
3.2.132 30
ServiceCategory ServiceCategory ::= OCTET STRING (SIZE(1..2)) --- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved
35
-- octet 2: the values listed below -Values (decimal) 0 1 2 3 4
5
ZTE Confidential Proprietary
Meanings Vacant No. Local network LE/ Ordinary service Local network outgoing/local call service Local network outgoing/rural call (network call) service Domestic toll (intra-area) manual service Domestic toll (intra-area) automatic service
Page 132 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
6 7 8 9 10 11 12 13 14 15 16 20 21 22 23 24 32 33 34 36 38 39 40 41 42 43 47 48 52 53 64 65 3.2.133
Domestic toll (inter-area) manual service Domestic toll (inter-area) automatic service International toll manual service International toll automatic service LE-charging special service Local free special service Outgoing-charging special service Outgoing free special service Supplementary service CENTREX LE call CENTREX outgoing call Play tone service DDC toll incoming service DDC local service DDC toll ougoing service DDC outgoing service MSC ordinary service MSC local service MSC local outgoing service MSC domestic toll call OVERLAY prefix incoming service OVERLAY call service MSC internatjional toll call IP phone service SSP vouching quest service Non-SSP vouching quest service OVERLAY MO call service OVERLAY MT call service H323 call service Mobile emergent special service Home network trig user Independent SSP outgoing service
ServiceID ServiceID ::= INTEGER
3.2.134 5
ServiceKey ServiceKey ::= INTEGER
3.2.135
SMSLength SMSLength ::= OCTET STRING(SIZE(1))
3.2.136
SMSResult SMSResult ::= Diagnostics
103.2.137
SPC14 SPC14 ::= OCTET STRING (SIZE(2))
ZTE Confidential Proprietary
Page 133 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 bit
8
7
6
spare
5
4
3
2
1
main
8
7
6
5
4
3
sub
octet 2
2
1
spc octet 1
The octet 1 appears first in the coding stream,followed by octet 2. For example,if the spc14 is “7.4.5” , the coding stream is 0x25 0x38
3.2.138 5
SPC24 SPC24 ::= OCTET STRING (SIZE(3)) 8
3.2.139
7
6
5
4
3
2
1
main
octet1
sub
octet2
spc
octet3
SPCCode SPCCode ::= CHOICE { SPCCode14 SPCCode24
10
[0] SPC14, [1] SPC24
}
3.2.140
SpeechVersionIdentifier SpeechVersionIdentifier::= OCTET STRING (SIZE(1..2))
15
--- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved -- octet 2: the values listed below
20
-Value Binary '000 0000'B '000 0010'B '000 0100'B '000 0110'B '000 1000'B '000 0001'B '000 0101'B '000 0111'B
3.2.141
Decimal 0 2 4 6 8 1 5 7
Meaning GSM speech full rate version 1 GSM speech full rate version 2 GSM speech full rate version 3 GSM speech full rate version 4 GSM speech full rate version 5 GSM speech half rate version 1 GSM speech half rate version 3 GSM speech half rate version 4
SSActionResult SSActionResult ::= Diagnostics
3.2.142
SSActionType SSActionType::= ENUMERATED
25
{
ZTE Confidential Proprietary
Page 134 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 registration erasure activation deactivation interrogation invocation passwordRegistration
5
(0), (1), (2), (3), (4), (5), (6)
}
3.2.143 10
SS-Code SS-Code ::= OCTET STRING (SIZE (1..2)) --- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved
15
-- octet 2: the values listed below -Value
Meaning
Binary Hexdecimal all line identification SS ‘00010001’B 11 calling line identification presentation ‘00010010’B 12 calling line identification restriction ‘00010011’B 13 connected line identification presentation ‘00010100’B 14 connected line identification restriction ‘00010101’B 15 malicious call identification ‘00011000’B 18 all name identification SS ‘00011001’B 19 calling name presentation all forwarding SS ‘00100001’B 21 call forwarding unconditional ‘00101000’B 28 all conditional forwarding SS ‘00101001’B 29 call forwarding on mobile subscriber busy ‘00101010’B 2A call forwarding on no reply ‘00101011’B 2B call forwarding on mobile subscriber not reachable ‘00100100’B 24 call deflection all call offering SS includes also all forwarding SS ‘00110001’B 31 explicit call transfer ‘00110010’B 32 mobile access hunting all Call completion SS ‘01000001’B 41 call waiting ‘01000010’B 42 call hold ‘01000011’B 43 completion of call to busy subscribers, originating side ‘01000100’B 44 completion of call to busy subscribers, destination side. ‘01000101’B 45 multicall all multiparty SS ‘01010001’B 51 multiparty all community of interest SS ‘01100001’B 61 closed user group all charging SS ‘01110001’B 71 advice of charge information ‘01110010’B 72 advice of charge charging
ZTE Confidential Proprietary
Page 135 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 all additional information transfer SS ‘10000001’B 81 UUS1 user-to-user signalling ‘10000010’B 82 UUS2 user-to-user signalling ‘10000011’B 83 UUS3 user-to-user signalling all barring SS ‘10010001’B 91 barring of outgoing calls ‘10010010’B 92 barring of all outgoing calls ‘10010011’B 93 barring of outgoing international calls ‘10010100’B 94 barring of outgoing international calls except those directed to the home PLMN ‘10011001’B 99 barring of incoming calls ‘10011010’B 9A barring of all incoming calls ‘10011011’B 9B barring of incoming calls when roaming outside home PLMN Country all call priority SS ‘10100001’B A1 enhanced Multilevel Precedence Pre-emption (EMLPP) service all LCS Privacy Exception Classes ‘10110001’B B1 allow location by any LCS client ‘10110010’B B2 allow location by any value added LCS client to which a call is established from the target MS ‘10110011’B B3 allow location by designated external value added LCS clients ‘10110100’B B4 allow location by designated PLMN operator LCS clients '10110101'B B5 allow location by LCS clients of a designated LCS service type all Mobile Originating Location Request Classes ‘11000001’B C1 allow an MS to request its own location ‘11000010’B C2 allow an MS to perform self location without interaction with the PLMN for a predetermined period of time ‘11000011’B C3 allow an MS to request transfer of its location to another LCS client '11110000'B F0 allPLMN-specificSS '11110001'B F1 plmn-specificSS-1 '11110010'B F2 plmn-specificSS-2 '11110011'B F3 plmn-specificSS-3 '11110100'B F4 plmn-specificSS-4 '11110101'B F5 plmn-specificSS-5 '11110110'B F6 plmn-specificSS-6 '11110111'B F7 plmn-specificSS-7 '11111000'B F8 plmn-specificSS-8 '11111001'B F9 plmn-specificSS-9 '11111010'B FA plmn-specificSS-A '11111011'B FB plmn-specificSS-B '11111100'B FC plmn-specificSS-C '11111101'B FD plmn-specificSS-D '11111110'B FE plmn-specificSS-E '11111111'B FF plmn-specificSS-F
3.2.144
SSNCode SSNCode ::= ENUMERATED {
ZTE Confidential Proprietary
Page 136 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 SCCPManagement ISDNUserPart OMAP MAP HLRMAP VLRMAP MSCMAP EIRMAP AUC INAP RANAP RNSAP GMLCMAP CAP GsmSCFMAP SIWFMAP SGSNMAP GGSNMAP BSCBSSAP-LE MSCBSSAP-LE SMLCBSSAP-LE BSSO&M-A-Interface BSSAP-A-Interface SCTCAP IPTCAP
5
10
15
20
25
(1), (3), (4), (5), (6), (7), (8), (9), (10), (12), (142), (143), (145), (146), (147), (148), (149), (150), (250), (251), (252), (253), (254), (238), (237),
}
3.2.145
SSParameters SSParameters::= CHOICE { forwardedToNumber unstructuredData
30
[0] ForwardToNumber, [1] OCTET STRING
}
3.2.146
SubscriberCategory SubscriberCategory ::= Category
353.2.147
SuppServiceUsed SuppServiceUsed::= SEQUENCE { ssCode ssAction ssTime
40
[0] SS-Code, [1] SSActionType, [2] TimeStamp OPTIONAL
}
3.2.148
SystemType SystemType ::= ENUMERATED { unknown iuUTRAN gERAN
45
(0), (1) (2)
}
3.2.149 50
TrafficType TrafficType ::= ENUMERATED
ZTE Confidential Proprietary
Page 137 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
{ unknown 5
(0), localNetworkMobile localNetworkFixed (2), externalNetwork (3)
(1),
}
3.2.150
TBCD-STRING TBCD-STRING ::= OCTET STRING -- This type (Telephony Binary Coded Decimal String) is used to -- represent several digits from 0 through 9, *, #, a, b, c, two -- digits per octet, each digit encoded 0000 to 1001 (0 to 9), -- 1010 (*), 1011 (#), 1100 (a), 1101 (b) or 1110 (c); 1111 used -- as filler when there is an odd number of digits.
10
-- bits 8765 of octet n encoding digit 2n -- bits 4321 of octet n encoding digit 2(n-1) +1
15
3.2.151
TeleserviceCode TeleserviceCode ::= OCTET STRING (SIZE (1..2)) --
20
-- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved -- octet 2: the values listed below -Value Binary ‘00000000’B ‘00010000’B ‘00010001’B ‘00010010’B ‘00100000’B ‘00100001’B ‘00100010’B ‘01100000’B ‘01100001’B ‘01100010’B ‘01100011’B ‘01110000’B ‘10000000’B ‘10010000’B ‘10010001’B ‘10010010’B ‘11010000’B ‘11010001’B ‘11010010’B ‘11010011’B ‘11010100’B ‘11010101’B
ZTE Confidential Proprietary
Hexdecimal 00 10 11 12 20 21 22 60 61 62 63 70 80 90 91 92 D0 D1 D2 D3 D4 D5
Meaning All Teleservices All Speech Transmission Services telephony emergencyCalls All Short Message Services Short Message MT-PP Short Message MO-PP All Facsimile Transmission Services Facsimile Group3 And Alter Speech Automatic Facsimile Group 3 Facsimile Group4 All DataTeleservices All Teleservices-ExceptSMS All voice Group Call Services Voice Group Call Voice Broadcast Call All PLMN-specificTS plmn-specific TS-1 plmn-specific TS-2 plmn-specific TS-3 plmn-specific TS-4 plmn-specific TS-5
Page 138 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 ‘11010110’B ‘11010111’B ‘11011000’B ‘11011001’B ‘11011010’B ‘11011011’B ‘11011100’B ‘11011101’B ‘11011110’B ‘11011111’B
3.2.152
D6 D7 D8 D9 DA DB DC DD DE DF
plmn-specific TS-6 plmn-specific TS-7 plmn-specific TS-8 plmn-specific TS-9 plmn-specific TS-A plmn-specific TS-B plmn-specific TS-C plmn-specific TS-D plmn-specific TS-E plmn-specific TS-F
TermCAMELCallType TermCAMELCallType ::= ENUMERATED { terminatingCAMELCall
5
(0),
visitedTerminatingCAMELCall }
3.2.153
(1)
TerminatingRecordType TerminatingRecordType ::= ENUMERATED {
10
ordinaryTerminating
(0),
forwardOnUnconditionalTerminating forwardOnBusyTerminating
(1),
(2),
forwardOnNotReplyTerminating
(3),
forwardOnMsNotReachableTerminating (4),
15
forwardOnOtherReasonTerminating }
3.2.154
(255)
TimeStaTimeStamp TimeStamp ::= OCTET STRING (SIZE(9)) Octet 1 Octet 2 Octet 3 Octet 4 Octet 5 Octet 6 Octet 7 Octet 8 Octet 9
8 7 YY MM DD hh mm ss S hh mm
6
5
4
3
2
Local time of UTC compression format 20
25
--YY --MM --DD -- hh -- mm -- ss
= = = = = =
ZTE Confidential Proprietary
Year 00 to 99 Month 01 to 12 Day 01 to 31 hour 00 to 23 minute 00 to 59 second 00 to 59
BCD encoded BCD encoded BCD encoded BCD encoded BCD encoded BCD encoded
Page 139 of 204
1
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 -- S -- hh -- mm
3.2.155 5
= = =
Sign 0 = “+”, “-“ hour 00 to 23 minute 00 to 59
ASCII encoded BCD encoded BCD encoded
TKGPName TKGPName ::= IA5String (SIZE(1..32))
3.2.156
TPMsgType-MO TPMsgType-MO::= ENUMERATED { SMS-DELIVER-REPORT SMS-SUBMIT SMS-COMMAND Reserved
10
(0), (1), (2), (3)
}
153.2.157
TPMsgType-MT TPMsgType-MT :: = ENUMERATED { SMS-DELIVER SMS-SUBMIT-REPORT SMS-STATUS-REPORT Reserved
20
(0), (1), (2), (3)
}
3.2.158
TrafficChannel TrafficChannel::= ENUMERATED
25
{ fullRate halfRate
(0), (1)
}
3.2.159 30
TranslatedNumber TranslatedNumber::= BCDDirectoryNumber
3.2.160
TransparencyInd TransparencyInd::= ENUMERATED { transparent nonTransparent
35
(0), (1)
}
3.2.161
TrunkGroup TrunkGroup ::= OCTET STRING(SIZE(4)) 8 Octet 1 Octet 2 Octet 3
ZTE Confidential Proprietary
7
(MSB) (MSB)
6
5
4
Mudule Mudule Group
3
2 (LSB)
Page 140 of 204
1
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Octet 4
3.2.162
Group
(LSB)
TrunkLine TrunkLine ::= OCTET STRING(SIZE(1)) Value（Decimal） 1 2 3 34 35 36 42 44
3.2.163
Meaning TUP ISUP DLC1 R2 ISDN AGR BICC SIP
TypeOfServiceChange TypeOfServiceChange::=ENUMERATED
5
{ changeToSpeech
(0),
changeToMultimedia (1) }
3.2.164 10
USSDDataCodingScheme USSDDataCodingScheme ::= OCTET STRING(SIZE(1..2)) --- If the value is greater than 127, it will be encoded as 2 octets. -- The octet 1 appears first in the coding stream, followed by octet 2. -- octet 1: 0 -- reserved
15
-- octet 2: the values listed below -Coding Group Bits 7..4 0000
Use of bits 3..0 Language using the GSM 7 bit default alphabet Bits 3..0 indicate the language: 0000 German 0001 English 0010 Italian 0011 French 0100 Spanish 0101 Dutch 0110 Swedish 0111 Danish 1000 Portuguese 1001 Finnish 1010 Norwegian 1011 Greek 1100 Turkish 1101 Hungarian 1110 Polish 1111 Language unspecified
ZTE Confidential Proprietary
Page 141 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Coding Group Bits 7..4 0001
Use of bits 3..0 0000 GSM 7 bit default alphabet; message preceded by language indication. The first 3 characters of the message are a two-character representation of the language encoded according to ISO 639 [12], followed by a CR character. The CR character is then followed by 90 characters of text. TTS
UCS2; message preceded by language indication
The message starts with a two GSM 7-bit default alphabet character representation of the language encoded according to ISO 639 [12]. This is padded to the octet boundary with two bits set to 0 and then followed by 40 characters of UCS2-encoded message. An MS not supporting UCS2 coding will present the two character language identifier followed by improperly interpreted user data.
0010..
0010..1111 0000 0001 0010 0011 0100
Reserved Czech Hebrew Arabic Russian Icelandic
0101..1111 Reserved for other languages using the GSM 7 bit default alphabet, with unspecified handling at the MS 0011
0000..1111 Reserved for other languages using the GSM 7 bit default alphabet, with unspecified handling at the MS
01xx
General Data Coding indication Bits 5..0 indicate the following: Bit 5, if set to 0, indicates the text is uncompressed Bit 5, if set to 1, indicates the text is compressed using the compression algorithm defined in 3GPP TS 23.042 [13] Bit 4, if set to 0, indicates that bits 1 to 0 are reserved and have no message class meaning Bit 4, if set to 1, indicates that bits 1 to 0 have a message class meaning: Bit 1 Bit 0 Message Class: 0 0 0 1 specific. 1 0 message. 1 1 specific (see 3GPP TS 27.005 [8])
1000
ZTE Confidential Proprietary
Class 0 Class 1 Default meaning: MEClass 2 (U)SIM specific Class 3 Default meaning: TE-
Bits 3 and 2 indicate the character set being used, as follows: Bit 3 Bit 2 Character set: 0 0 GSM 7 bit default alphabet 0 1 8 bit data 1 0 UCS2 (16 bit) [10] 1 1 Reserved Reserved coding groups
Page 142 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 Coding Group Bits 7..4 1001
Use of bits 3..0 Message with User Data Header (UDH) structure: Bit 1 Bit 0 Message Class: 0 0 0 1 specific. 1 0 message. 1 1 specific (see 3GPP TS 27.005 [8])
1010..1101 1110 1111
Class 0 Class 1 Default meaning: MEClass 2 (U)SIM specific Class 3 Default meaning: TE-
Bits 3 and 2 indicate the alphabet being used, as follows: Bit 3 Bit 2 Alphabet: 0 0 GSM 7 bit default alphabet 0 1 8 bit data 1 0 USC2 (16 bit) [10] 1 1 Reserved Reserved coding groups Defined by the WAP Forum [15] Data coding / message handling Bit 3 is reserved, set to 0. Bit 2 0 1 Bit 1 0 0 1 1
3.2.165
Message coding: GSM 7 bit default alphabet 8 bit data Bit 0
Message Class: 0 1 0 1
No message class. Class 1 user defined. Class 2 user defined. Class 3 default meaning: TE specific (see 3GPP TS 27.005 [8])
USSDOperationCode USSDOperationCode ::= ENUMERATED { processUnstructuredSS-Data processUnstructuredSS-Request unstructuredSS-Request unstructuredSS-Notify
5
(19), (59), (60), (61)
}
3.2.166 10
USSDServiceCode USSDServiceCode ::= INTEGER
3.2.167
VIGCallType VIGCallType ::= ENUMERATED {
15
incoming outgoing
ZTE Confidential Proprietary
(0), (1)
Page 143 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
}
3.3
TAG Value Definition
3.3.1
CallEventRecord Table 27 CallEventRecord Tag Values Tag Value
53.3.2
Description
H’ A0 H’A1 H’A2 H’A3 H’A4
MOCallRecord MTCallRecord ROAMRecord IncGatewayRecord OutGatewayRecord
H’A5
TransitRecord
H’A6
MOSMSRecord
H’A7
MTSMSRecord
H’AA
SSActionRecord
H’AB
HLRIntRecord
H’AC
MOECallRecord
H’AD
MCFCallRecord
H’AE
CommonEquipRecord
H’B0
TermCAMELIntRecord
H’B1
MTLCSRecord
H’B2
MOLCSRecord
H’B3
NILCSRecord
H’BF28
MOCPHRecord
H’BF29
MCFCPHRecord
H’BF2A
TCICPHRecord
H’BF2B
GSICPHRecord
H’BF2C
NCSCPHRecord
H’BF64
sigMTPStatisticRecord
H’BF65
sigSCCPStatisticRecord
H’BF66
USSDRecord
H’BF67
VIGRecord
MOCallRecord Table 28 MOCallRecord Tag Values TAG Value
Description
H’80 H’81 H’82 H’83
recordType servedIMSI servedIMEI servedMSISDN
H’84
calledNumber
H’85
translatedNumber
H’86
connectedNumber
H’87
roamingNumber
H’88
recordingEntity
H’89
mscIncomingTKGP
H’8A
mscOutgoingTKGP
ZTE Confidential Proprietary
Page 144 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’AB H’80 H’A1 H’80 H’81
location locationArea rncID plmnID rncID
H’AC H’30 H’A0 H’80 H’A1 H’80 H’81 H’81 H’AD H’83 H’82 H’8E
changeOfLocation SEQUENCE OF locationAreaAndCell locationArea rncID plmnID rncID changeTime basicService bearerService teleService transparencyIndicator
H’AF H’30 H’A0 H’83 H’82 H’81 H’82 H’B0 H’30 H’80 H’81 H’82 H’B1 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’B2 H’30 H’80 H’A1 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’93
changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime aocParameters e1 e2 e3 e4 e5 e6 e7 changeOfAOCParms SEQUENCE OF changeTime newParameters e1 e2 e3 e4 e5 e6 e7 msClassmark
H’B4 H’30 H’80 H’81 H’95
changeOfClassmark SEQUENCE OF classmark changeTime seizureTime
H’96
answerTime
H’97
releaseTime
H’98
callDuration
H’99
dataVolume
H’9A
radioChanRequested
H’9B
radioChanUsed
ZTE Confidential Proprietary
Page 145 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BC H’80 H’81 H’82 H’9D H’BE
changeOfRadioChan radioChannel changeTime speechVersionUsed causeForTerm
H’80 H’81 H’82 H’83 H’84 H’9F1F
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’9F20
sequenceNumber
H’9F21
lastLongPartInd
H’BF22 H’80 H’81 H’9F23
additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F24
isCAMELCall
H’9F25
Gsm-SCFAddress
H’9F26
serviceKey
H’9F27
networkCallReference
H’9F28
mSCAddress
H’9F29
defaultCallHandling
H’9F2A
isHSCSDUsed
H’9F2B
hSCSDChanRequested
H’9F2C
hSCSDChanAllocated
H’BF2D H’30 H’80 H’81 H’82 H’83 H’84 H’85 H’9F2E
changeOfHSCSDParms SEQUENCE OF changeTime hSCSDChanAllocated initiatingParty aiurRequested chanCodingUsed hSCSDChanRequested fnur
H’9F2F
aiurRequested
H’BF30 H’0A
chanCodingsAcceptable Enumerated
H’9F31
chanCodingUsed
H’9F32
speechVersionSupported
H’9F33
speechVersionUsed
H’9F34
numberOfDPEncountered
H’9F35
levelOfCAMELService
H’9F36
freeFormatData
ZTE Confidential Proprietary
Page 146 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BF37 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’8F H’90 H’91 H’92 H’9F38
cAMELCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter freeFormatData diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration freeFormatDataAppend
H’9F39
defaultCallHandling_2
H’9F3A
gsmSCFAddress_2
H’9F3B
serviceKey_2
H’9F3C
freeFormatData_2
H’9F3D
freeFormatDataAppend_2
H’9F3E
systemType
H’9F3F
exchangeIdentity
H’9F40
dialledNumber
H’9F41
subscriberCategory
H’9F42
recordSequenceNumber
H’9F43
eMLPPPriorityLevel
H’9F44
eMLPPRequestPriorityLevel
H’9F45
hotBillingTag
H’9F46
isCUGUsed
H’BF47 H80 H81 H’9F48
cUGCategory callType userType cUGInterLockCode
H’9F49
dataRate
H’9F4A
isMultiMediaCall
H’9F4B
rateIndication
H’9F4C
guaranteedBitRate
H’9F4D H’9F4E
maximumBitRate Pbrt
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’8D H’AE H’80 H’81 H’82 H’83 H’84
ZTE Confidential Proprietary
Page 147 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F4F H’9F50 H’9F51 H’9F52 H’9F53 H’9F58 H’9F59 H’BF5A H’80 H’A1 H’80 H’81 H’9F5B H’9F5C H’9F5D H’BF5E H’80 H’81 H’BF5F H’80 H’81 H’9F60 H’9F61 H’9F62 H’9F63 H’9F64 H’9F65 H’9F66 H’9F67 H’9F68 H’9F69 H’9F6A H’9F6B H’9F6C H’9F6D H’9F6E H’9F6F H’9F70 H’9F71 H’9F72 H’9F73 H’9F74 H’9F75 H’9F76 H’9F810A
3.3.3
Carp cUGIndex cUGOutgoingAccessUsed cUGOutgoingAccessInd hotBillingTag2 dDCFlag BSCIdentification
calledLocation locationArea rncID plmnID rncID callingPartyRoamingInd serviceCategory transactionIdentification incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName partialRecordType serviceChangeInitiator reasonForServiceChange typeOfServiceChange bscIdentification24 globalCallReference mNPNumber byPass wANAPPS mNPRoutingNumber iuReleaseCause aReleaseCause calledIMSI calledIMEI routingCategory millisecDuration outPulsedNumber byPassFlag2 operatorId suppressCAMELInd
MTCallRecord Table 29 MTCallRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87
ZTE Confidential Proprietary
Description RecordType ServedIMSI ServedIMEI ServedMSISDN CallingNumber RecordingEntity mscIncomingTKGP mscOutgoingTKGP
Page 148 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’A8 H’80 H’A1 H’80 H’81 H’A9 H’30 H’A0 H’80 H’A1 H’80 H’81 H’81 H’AA H’83 H’82 H’8B H’AC H’30 H’A0 H’83 H’82 H’81 H’82 H’AD H’30 H’80 H’81 H’82 H’AE H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’AF H’30 H’80 H’A1 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’90 H’B1 H’30 H’80 H’81 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’B9 H’80 H’81 H’82 H’9A
ZTE Confidential Proprietary
location locationArea rncID plmnID rncID changeOfLocation SEQUENCE OF locationAreaAndCell locationArea rncID plmnID rncID changeTime basicService bearerService teleService transparencyIndicator changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType SsTime AocParameters e1 e2 e3 e4 e5 e6 e7 changeOfAOCParms SEQUENCE OF changeTime newParameters e1 e2 e3 e4 e5 e6 e7 msClassmark changeOfClassmark SEQUENCE OF classmark changeTime seizureTime answerTime releaseTime callDuration dataVolume radioChanRequested radioChanUsed changeOfRadioChan radioChannel changeTime speechVersionUsed causeForTerm
Page 149 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BB
H’9C H’9D H’9E H’BF1F H’80 H’81 H’9F20
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F21 H’9F22 H’9F23 H’9F24 H’9F25 H’9F26 H’BF27 H’30 H’80 H’81 H’82 H’83 H’84 H’85 H’9F28 H’9F29 H’BF2A H’0A
isCAMELCall networkCallReference mSCAddress isHSCSDUsed hSCSDChanRequested hSCSDChanAllocated changeOfHSCSDParms SEQUENCE OF changeTime hSCSDChanAllocated initiatingParty aiurRequested chanCodingUsed hSCSDChanRequested Fnur aiurRequested chanCodingsAcceptable Enumerated
H’9F2B H’9F2C H’9F2D H’9F2E H’9F2F H’9F30 H’9F31 H’9F33 H’9F34 H’9F35 H’9F36 H’9F37 H’9F38 H’9F39
chanCodingUsed speechVersionSupported speechVersionUsed Gsm-SCFAddress serviceKey defaultCallHandling freeFormatData systemType exchangeIdentity redirectNumber subscriberCategory recordSequenceNumber connectedNumber hotBillingTag
H’9F3A
isCUGUsed
H’BF3B H80 H81 H’9F3C
cUGCategory callType userType cUGInterLockCode
H’9F3D
dataRate
H’9F3E
isMultiMediaCall
H’9F3F
rateIndication
H’9F40
guaranteedBitRate
H’9F41
maximumBitRate
H’9F42
pbrt
H’9F43
carp
H’9F44
cUGIndex
H’9F45
cUGIncomingAccessUsed
H’80 H’81 H’82 H’83 H’84
ZTE Confidential Proprietary
Page 150 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.4
H’9F46
cUGIncomingAccessInd
H’9F47
redirectingNumber
H’9F48
hotBillingTag2
H’9F4D
dDCFlag
H’9F4E
terminatingRecordType
H’9F4F
originalCalledNumber
H’BF50 H’80 H’A1 H’80 H’81 H’9F51
callingLocation locationArea rncID plmnID rncID bSCIdentification
H’9F52
calledPartyRoamingInd
H’9F53
serviceCategory
H’9F54
transactionIdentification
H’BF55 H’80 H’81 H’BF56 H’80 H’81 H’9F57 H’9F58 H’9F59
incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14 mscSPC24 incomingTKGPName
H’9F5A H’9F5B H’9F5C H’9F5D H’9F5E H’9F5F H’9F60 H’9F61 H’9F62 H’9F63 H’9F64 H’9F65 H’9F66 H’9F67 H’9F69 H’9F6A H’9F6B
outgoingTKGPName partialRecordType serviceChangeInitiator reasonForServiceChange typeOfServiceChange bscIdentification24 globalCallReference eMLPPPriorityLevel eMLPPRequestPriorityLevel iuReleaseCause aReleaseCause routingCategory millisecDuration operatorId incomingTrafficType outgoingTrafficType startTime
ROAMRecord Table 30 ROAMRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’A8 H’83 H’82 H’89
ZTE Confidential Proprietary
Description recordType servedIMSI servedMSISDN callingNumber roamingNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP basicService bearerService teleService transparencyIndicator
Page 151 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’AA H’30 H’A0 H’81 H’82 H’AB H’30 H’80 H’81 H’82 H’8C H’8D H’8E H’8F H’90 H’91 H’B2 H’80 H’81 H’82 H’83 H’84 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H’9A H’9B H’9C
changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd recordExtensions isCAMELCall networkCallReference mSCAddress exchangeIdentity recordSequenceNumber isCUGUsed
H’BD H80 H81 H’9E
cUGCategory callType userType cUGInterLockCode
H’9F1F
dataRate
H’9F20
isMultiMediaCall
H’9F21
hotBillingTag2
H’9F22
redirectNumber
H’9F23
bSCIdentification
H’9F24
serviceCategory
H’BF25 H’80 H’81 H’BF26 H’80 H’81 H’9F27
incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14
H’9F28 H’9F29
mscSPC24 incomingTKGPName
H’9F2A
outgoingTKGPName
H’9F2B
transRoamingNumber
H’9F2C
bscIdentification24
H’9F2D
globalCallReference
H’9F2E
routingCategory
H’9F2F
millisecDuration
H’83 H’82
ZTE Confidential Proprietary
Page 152 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.5
H’9F30
operatorId
H’BF3A H’80 H’81 H’82 H’83 H’84 H’85 H’9F3B
roamCamelInfomation interrogationTime destRouteNumber gsm-SCFAddress serviceKey mSCAddress defaultCallHandling incomingTrafficType
H’9F3C
outgoingTrafficType
H’9F3D
startTime
IncGatewayRecord Table 31 IncGatewayRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’81 H’82 H’83 H’84 H’8D H’8E H’8F H’90 H’91 H’B2 H’80 H’81 H’93 H’94 H’99 H’9A H’9B H’9C H’BD H’80 H’81 H’BE H’80 H’81 H’9F1F H’9F20 H’9F21 H’9F22 H’9F23 H’9F24 H’9F25
ZTE Confidential Proprietary
Description recordType callingNumber calledNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd recordExtensions exchangeIdentity additionalChgInfo chargeIndicator chargedParty recordSequenceNumber pbrt dDCFlag gatewayRecordType roamingNumber redirectNumber incomingCic pcmUnit channel outgoingCic pcmUnit channel
mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName forwardCallIndicator partialRecordType serviceChangeInitiator
Page 153 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F26 H’9F27 H’BF28 H’83 H’82 H’9F29 H’9F2A H’9F2B H’9F2C H’9F2D H’9F2E H’9F30 H’9F31 H’9F32 H’9F33 H’9F34 H’9F35 H’9F36 H’9F37 H’9F38 H’BF39 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’8D H’AE H’80 H’81 H’82 H’83 H’84 H’8F H’90 H’91 H’92 H’9F3A H’9F3B H’9F3C H’9F3E H’9F3F H’9F40 H’9F41 H’9F42 H’9F43 H’9F44
ZTE Confidential Proprietary
reasonForServiceChange typeOfServiceChange isdnBasicService bearerService teleService globalCallReference mNPNumber isMultiMediaCall mNPRoutingNumber trunkLine millisecDuration isCAMELCall gsm-SCFAddress serviceKey networkCallReference mSCAddress defaultCallHandling numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter freeFormatData diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration freeFormatDataAppend outPulsedNumber operatorId initialCalledNumber connectedNumber forwardedToNumber localOfficeForward incomingTrafficType outgoingTrafficType startTime
Page 154 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.6
OutGatewayRecord Table 32 OutGatewayRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’81 H’82 H’83 H’84 H’8D H’8E H’8F H’90 H’91 H’B2 H’80 H’81 H’93 H’94 H’99 H’9A H’9B H’9C H’BD H’80 H’81 H’BE H’80 H’81 H’9F1F H’9F20 H’9F21 H’9F22 H’9F24 H’9F25 H’9F26 H’9F27 H’BF28 H’83 H’82 H’9F29 H’9F2A H’9F2B H’9F2D H’9F2E H’9F2F H’9F3C H’9F3E H’9F3F
ZTE Confidential Proprietary
Description recordType callingNumber calledNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd recordExtensions exchangeIdentity additionalChgInfo chargeIndicator chargedParty recordSequenceNumber pbrt dDCFlag gatewayRecordType roamingNumber redirectNumber incomingCic pcmUnit channel outgoingCic pcmUnit channel
mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName partialRecordType serviceChangeInitiator reasonForServiceChange typeOfServiceChange isdnBasicService bearerService teleService globalCallReference mNPNumber isMultiMediaCall trunkLine millisecDuration rmPlusB operatorId initialCalledNumber connectedNumber
Page 155 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F40 H’9F41 H’9F42 H’9F43 H’9F44
3.3.7
forwardedToNumber localOfficeForward incomingTrafficType outgoingTrafficType startTime
TransitRecord Table 33 TransitRecord Tag Values Tag Value H’80 H’81 H’82 H’A3 H’83 H’82 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’8C H’AD H’80 H’81 H’82 H’83 H’84 H’8E H’8F H’90 H’91 H’92 H’B3 H’80 H’81 H’94 H’95 H’9A H’9B H’9C H’BD H’80 H’81 H’BE H’80 H’81 H’9F1F H’9F20 H’9F21 H’9F22 H’9F23 H’9F24 H’9F25 H’9F26 H’9F27 H’9F28 H’9F29 H’9F2A
ZTE Confidential Proprietary
Description recordType callingNumber calledNumber isdnBasicService bearerService teleService recordingEntity mscIncomingTKGP mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd recordExtensions exchangeIdentity additionalChgInfo chargeIndicator chargedParty recordSequenceNumber pbrt dDCFlag roamingNumber redirectNumber incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName globalCallReference mNPNumber isMultiMediaCall partialRecordType reasonForServiceChange serviceChangeInitiator typeOfServiceChange trunkLine
Page 156 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F2B H’9F2C H’9F2D H’9F2E H’9F2F H’9F30 H’9F31 H’9F32 H’9F33 H’9F34 H’BF35 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’8D H’AE H’80 H’81 H’82 H’83 H’84 H’8F H’90 H’91 H’92 H’9F36 H’9F37 H’9F38 H’9F3A H’9F3B H’9F3C H’9F3D H’9F3E
3.3.8
millisecDuration isCAMELCall gsm-SCFAddress serviceKey networkCallReference mSCAddress defaultCallHandling numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter freeFormatData diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration freeFormatDataAppend outPulsedNumber operatorId initialCalledNumber connectedNumber incomingTrafficType outgoingTrafficType startTime
MOSMSRecord Table 34 MOSMSRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86
ZTE Confidential Proprietary
Description recordType servedIMSI servedIMEI servedMSISDN msClassmark serviceCentre recordingEntity
Page 157 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.9
H’A7 H’80 H’A1 H’80 H’81 H’88 H’89 H’AA H’80 H’81 H’82 H’83 H’84 H’8B H’8C H’AD H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’8E H’8F H’90 H’91
location locationArea rncID plmnID rncID messageReference originationTime smsResult gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause recordExtensions destinationNumber cAMELSMSInformation sCFAddress serviceKey defaultSMSHandling freeFormatData cAMELCallingPartyNumber cAMELDestSubscriberNumber cAMELSMSCAddress smsRefrenceNumber systemType exchangeIdentity recordSequenceNumber hotBillingTag
H’92
hotBillingTag2
H’93
transactionIdentification
H’94
mscSPC14
H’95
mscSPC24
H’96
directSmsFlag
H’97
numOfConcatenated
H’98
concatenatedRecordNum
H’99
concatenatedRef
H’9A
tPMessageTypeIndicator
H’9B
sMSLength
H’9C
callReference
H’9D
locationExtension
H’9E
operatorId
H’BF20 H’83 H’82
basicService bearerService teleService
MTSMSRecord Table 35 MTSMSRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86
ZTE Confidential Proprietary
Description recordType serviceCentre servedIMSI servedIMEI servedMSISDN msClassmark recordingEntity
Page 158 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.10
H’A7 H’80 H’A1 H’80 H’81 H’88 H’A9 H’80 H’81 H’82 H’83 H’84 H’8A H’8B H’8C H’8D H’8E H’8F
location locationArea rncID plmnID rncID deliveryTime smsResult gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause recordExtensions systemType exchangeIdentity recordSequenceNumber originationNumber hotBillingTag
H’90
hotBillingTag2
H’91
transactionIdentification
H’92 H’93
mscSPC14 mscSPC24
H’B4 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’95
cAMELSMSInformation sCFAddress serviceKey defaultSMSHandling freeFormatData cAMELCallingPartyNumber cAMELDestSubscriberNumber cAMELSMSCAddress smsRefrenceNumber directSmsFlag
H’96
numOfConcatenated
H’97
concatenatedRecordNum
H’98
concatenatedRef
H’99
tPMessageTypeIndicator
H’9A
sMSLength
H’9B
callReference
H’9C
locationExtension
H’9D
operatorId
H’BF1F H’83 H’82
basicService bearerService teleService
SSActionRecord Table 36 SSActionRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’A6 H’80 H’A1 H’80 H’81
ZTE Confidential Proprietary
Description recordType servedIMSI servedIMEI servedMSISDN msClassmark recordingEntity location locationArea rncID plmnID rncID
Page 159 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’A7 H’83 H’82 H’88 H’89 H’8A H’AB H’80 H’81 H’AC H’80 H’81 H’82 H’83 H’84 H’8D H’8E H’8F H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99
3.3.11
basicService bearerService teleService supplService ssAction ssActionTime ssParameters forwardedToNumber unstructuredData ssActionResult gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference recordExtensions systemType exchangeIdentity recordSequenceNumber forwardedSubNumber noReplyCondTime hotBillingTag2 transactionIdentification mscSPC14 mscSPC24 globalCallReference operatorId
MOECallRecord Table 37 MOECallRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’A8 H’80 H’A1 H’80 H’81 H’A9 H’30 H’A0 H’80 H’A1 H’80 H’81 H’81 H’AA H’83 H’82 H’AB H’81 H’82 H’83 H’84 H’85
ZTE Confidential Proprietary
Description recordType servedIMSI servedIMEI servedMSISDN translatedNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP location locationArea rncID plmnID rncID changeOfLocation SEQUENCE OF locationAreaAndCell locationArea rncID plmnID rncID changeTime basicService bearerService teleService aocParameters e1 e2 e3 e4 e5
Page 160 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’86 H’87 H’AC H’30 H’80 H’A1 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’8D H’AE H’30 H’80 H’81 H’8F H’90 H’91 H’92 H’93 H’94 H’B5 H’80 H’81 H’82 H’96 H’B7 H’80 H’81 H’82 H’83 H’84 H’98 H’99 H’9A H’9B H’9C H’9D H’9E H’9F1F H’9F20 H’9F21 H’9F22 H’9F23
e6 e7 changeOfAOCParms SEQUENCE OF changeTime newParameters e1 e2 e3 e4 e5 e6 e7 msClassmark changeOfClassmark SEQUENCE OF classmark changeTime seizureTime answerTime releaseTime callDuration radioChanRequested radioChanUsed changeOfRadioChan radioChannel changeTime speechVersionUsed causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause sequenceNumber lastLongPartInd callReference recordExtensions systemType exchangeIdentity subscriberCategory calledNumber recordSequenceNumber roamingNumber eMLPPPriorityLevel eMLPPRequestPriorityLevel
H’9F24 H’9F25 H’9F26 H’9F27 H’9F28 H’BF29 H’80 H’81 H’BF2A H’80 H’81 H’9F2B H’9F2C
hotBillingTag carp hotBillingTag2 bSCIdentification transactionIdentification incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14
H’9F2D
incomingTKGPName
ZTE Confidential Proprietary
mscSPC24
Page 161 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F2E H’9F2F H’9F30 H’9F31 H’9F32 H’9F33 H’9F34 H’9F35 H’9F36 H’9F37 H’9F38 H’9F39 H’9F3A H’9F3B H’9F3C H’9F3D H’9F3F
3.3.12
outgoingTKGPName bscIdentification24 globalCallReference iuReleaseCause aReleaseCause isCAMELCall dPNumber gsm-SCFAddress mSCAddress levelOfCAMELService serviceKey defaultCallHandling networkCallReference routingCategory millisecDuration operatorId suppressCAMELInd
MCFCallRecord Table 38 MCFCallRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’8C H’AD H’83 H’82 H’8E H’AF H’30 H’A0 H’83 H’82 H’81 H’82 H’B0 H’30 H’80 H’81 H’82 H’91 H’92 H’93 H’94 H’95 H’B6 H’80
ZTE Confidential Proprietary
Description recordType mcfType servedIMSI servedIMEI servedMSISDN callingNumber calledNumber translatedNumber connectedNumber roamingNumber recordingEntity mscIncomingTKGP mscOutgoingTKGP basicService bearerService teleService transparencyIndicator changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime seizureTime answerTime releaseTime callDuration causeForTerm diagnostics gsm0408Cause
Page 162 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’81 H’82 H’83 H’84 H’97 H’98 H’99 H’9A H’BB H’80 H’81 H’9C H’9D H’9E H’9F1F H’9F20 H’9F21 H’9F22 H’9F23 H’9F24 H’9F25 H’9F26 H’BF27 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’8D H’AE H’80 H’81 H’82 H’83 H’84 H’8F H’90 H’91 H’92 H’9F28 H’9F29 H’9F2A H’9F2B H’9F2C H’9F2D H’9F2E H’9F2F H’9F30 H’9F31
ZTE Confidential Proprietary
gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause dataVolume sequenceNumber lastLongPartInd callReference additionalChgInfo chargeIndicator chargedParty recordExtensions isCAMELCall gsm-SCFAddress serviceKey networkCallReference mSCAddress cAMELInitCFIndicator defaultCallHandling numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter freeFormatData diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration freeFormatDataAppend defaultCallHandling_2 gsm-SCFAddress_2 serviceKey_2 freeFormatData_2 freeFormatDataAppend_2 subscriberCategory systemType exchangeIdentity recordSequenceNumber
Page 163 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F32 H’9F33
numberOfForwarding hotBillingTag
H’9F34
isCUGUsed
H’BF35 H80 H81 H’9F36
cUGCategory
H’9F37
dataRate
H’9F38
isMultiMediaCall
H’9F39
rateIndication
H’9F3A
fnur
H’9F3B H’9F3C H’9F3D H’9F3E H’9F3F H’9F40 H’9F41 H’BF42 H’80 H’A1 H’80 H’81 H’9F43 H’9F44 H’BF45 H’80 H’81 H’BF46 H’80 H’81 H’9F47 H’9F48 H’9F49 H’9F4A H’9F4B H’9F4C H’9F4D H’9F4E H’9F4F H’9F50 H’9F51 H’9F52 H’9F53 H’9F54 H’9F55 H’9F56 H’9F57 H’BF58 H’80 H’A1 H’80 H’81 H’9F59 H’9F5A H’9F5B H’9F65
pbrt carp cUGIndex cUGOutgoingAccessUsed cUGOutgoingAccessInd hotBillingTag2 bSCIdentification calledLocation locationArea rncID plmnID rncID callingPartyRoamingInd serviceCategory incomingCic pcmUnit channel outgoingCic pcmUnit channel mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName partialRecordType serviceChangeInitiator reasonForServiceChange typeOfServiceChange bscIdentification24 globalCallReference mNPNumber byPass wANAPPS mNPRoutingNumber fordwardedToIMSI routingCategory millisecDuration location locationArea rncID plmnId rncID outPulsedNumber byPassFlag2 operatorId originalCalledNumber
ZTE Confidential Proprietary
callType userType cUGInterLockCode
Page 164 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F66 H’9F67 H’9F68 H’9F69 H’9F73
3.3.13
localOfficeForward incomingTrafficType outgoingTrafficType startTime suppressCAMELInd
CommonEquipRecord Table 39 CommonEquipRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’A6 H’83 H’82 H’A7 H’30 H’A0 H’83 H’82 H’81 H’82 H’A8 H’30 H’80 H’81 H’82 H’89 H’8A H’8B H’8C H’8D H’8E H’8F H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97
3.3.14
Description recordType equipmentType equipmentId servedIMSI servedMSISDN recordingEntity basicService bearerService teleService changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime seizureTime releaseTime callDuration callReference sequenceNumber lastLongPartInd recordExtensions exchangeIdentity recordSequenceNumber systemType rateIndication fnur hotBillingTag2 millisecDuration operatorId
TermCAMELIntRecord Table 40 TermCAMELIntRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89
ZTE Confidential Proprietary
Description recordType servedIMSI servedMSISDN recordingEntity interrogationTime destinationRoutingAddress gsm-SCFAddress serviceKey networkCallReference mSCAddress
Page 165 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’8A H’8B H’8C H’8D H’8E H’8F H’90 H’91 H’92 H’93 H’94 H’95 H’B6 H’80 H’81 H’82 H’83 H’84 H’97 H’98 H’99 H’9A H’9B H’9C H’BD H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’8D H’AE H’80 H’81 H’82 H’83 H’84 H’8F H’90 H’91 H’92 H’9E H’9F1F H’9F20 H’9F21 H’9F22 H’9F23 H’9F24 H’9F25
ZTE Confidential Proprietary
defaultCallHandling recordExtensions calledNumber callingNumber mscIncomingTKGP mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd numberOfDPEncountered levelOfCAMELService freeFormatData cAMELCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter freeFormatData diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatDataAppend freeFormatData_2 freeFormatDataAppend_2 camelInfoMillisecDuration freeFormatDataAppend exchangeIdentity recordSequenceNumber mscServerIndication gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2
Page 166 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’9F26 H’9F2B H’BF2C H’80 H’81 H’BF2D H’80 H’81 H’9F2E H’9F2F H’9F30 H’9F31 H’9F32 H’9F33 H’9F35 H’9F37 H’9F38 H’9F39
3.3.15
freeFormatDataAppend-2 hotBillingTag2 incomingCic pcmUnit channel outgoingCic pcmUnit channel
mscSPC14 mscSPC24 incomingTKGPName outgoingTKGPName globalCallReference millisecDuration operatorId incomingTrafficType outgoingTrafficType startTime
HLRIntRecord Table 41 HLRIntRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’A4 H’83 H’82 H’A5 H’81 H’82 H’86 H’87 H’A8 H’80 H’81 H’82 H’83 H’84 H’89 H’8A H’8B H’8C H’8D H’8E H’8F H’90 H’91 H’92
3.3.16
Description recordType servedIMSI servedMSISDN recordingEntity basicService bearerService teleService routingNumber roaming Forwarded interrogationTime numberOfForwarding interrogationResult gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause recordExtensions exchangeIdentity recordSequenceNumber hotBillingTag2 operatorId sdcInterrogationFlag callingNumberBeforeSDC oriCalledNumberBeforeSDC sdcInterrogatedCallingNumber sdcInterrogatedOriCalledNumber
LCSMTRecord Table 42 LCSMTRecord Tag Values Tag Value H’80 H’81 H’82 H’A3 H’A0 H’80
ZTE Confidential Proprietary
Description recordType recordingEntity lcsClientType lcsClientIdentity lcsClientExternalID externalAddress
Page 167 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’81 H’82
lcsClientDialedByMS lcsClientInternalID servedIMSI servedMSISDN locationType locationEstimateType deferredLocationEventType lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration notificationToMSUser privacyOverride location locationArea rncID plmnID rncID locationEstimate positioningData lcsCause diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo chargeIndicator chargedParty hotBillingTag2 operatorId
H’84 H’85 H’A6 H’80 H’81 H’87 H’88 H’89 H’8A H’8B H’8C H’8D H’AE H’80 H’A1 H’80 H’81 H’8F H’90 H’91 H’B2 H’80 H’81 H’82 H’83 H’84 H’93 H’94 H’95 H’96 H’97 H’B8 H’80 H’81 H’99 H’9A
3.3.17
LCSMORecord Table 43 LCSMORecord Tag Values Tag Value H’80 H’81 H’82 H’A3 H’A0 H’80 H’81 H’82 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC H’80 H’A1 H’80
ZTE Confidential Proprietary
Description recordType recordingEntity lcsClientType lcsClientIdentity lcsClientExternalID externalAddress lcsClientDialedByMS lcsClientInternalID servedIMSI servedMSISDN molr-Type lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration location locationArea rncID plmnID
Page 168 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’81
rncID locationEstimate positioningData lcsCause diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo chargeIndicator chargedParty hotBillingTag2 operatorId
H’8D H’8E H’8F H’B0 H’80 H’81 H’82 H’83 H’84 H’91 H’92 H’93 H’94 H’95 H’B6 H’80 H’81 H’97 H’98
3.3.18
LCSNIRecord Table 44 LCSNIRecord Tag Values Tag Value H’80 H’81 H’82 H’A3 H’A0 H’80 H’81 H’82 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’8C H’8D H’8F H’90 H’91 H’B2 H’80 H’81 H’82 H’83 H’84 H’93 H’94 H’95 H’96 H’97 H’B8 H’80 H’81 H’99 H’9A
ZTE Confidential Proprietary
Description recordType recordingEntity lcsClientType lcsClientIdentity lcsClientExternalID externalAddress lcsClientDialedByMS lcsClientInternalID servedIMSI servedMSISDN servedIMEI emsDigits emsKey lcsQos lcsPriority mlc-Number eventTimeStamp measureDuration locationEstimate positioningData lcsCause diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause systemType recordExtensions recordSequenceNumber hotBillingTag causeForTerm additionalChgInfo chargeIndicator chargedParty hotBillingTag2 operatorId
Page 169 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.19
USSDRecord Table 45 USSDRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’A8 H’80 H’A1 H’80 H’81 H’89 H’8A H’8B H’8C H’8D H’8E H’AF H’80 H’81 H’82 H’83 H’84 H’90 H’91 H’92 H’93 H’94 H’95
3.3.20
Description RecordType ServedIMSI ServedIMEI ServedMSISDN MsClassmark recordingEntity StartTime EndTime location locationArea rncID plmnID rncID CallReference uSSDInteractionCount uSSDUnstructuredData uSSDOpreationCode uSSDDataCodingScheme uSSDServiceCode errorCode gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause systemType hotBillingTag exchangeIdentity recordSequenceNumber hotBillingTag2 operatorId
VIGRecord Table 46 VIGRecord Tag Values Tag Value H’80 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’A8 H’80 H’81 H’82 H’83 H’84 H’89 H’8A H’8B H’8C H’8D H’8E H’8F
ZTE Confidential Proprietary
Description RecordType callingNumber calledNumber vigCallType startTime endTime callDuration causeForTerm diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference sequenceNumber lastLongPartInd callDataRate exchangeIdentity recordSequenceNumber millisecDuration
Page 170 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
3.3.21
SigMTPStatisticRecord Table 47 SigMTPStatisticRecord Tag Valies Tag Value H’80 H’81 H’82 H’83 H’A4 H’80 H’81 H’A5 H’80 H’81 H’A6 H’80 H’81 H’A7 H’80 H’81 H’88 H’89 H’8A H’8B H’8C
3.3.22
Description recordType recordSequenceNumber billType serviceIdentifier sPC sPC14 sPC24 oPC sPC14 sPC24 dPC sPC14 sPC24 chargedNeighbor sPC14 sPC24 amountOfMessage amountOfOctets recordOpeningTime recordClosingTime physicalLocation
sigSCCPStatisticRecord Table 48 sigSCCPStatisticRecord Tag Values Tag Value H’80 H’81 H’82 H’A3 H’80 H’81 H’A4 H’80 H’81 H’A5 H’80 H’81 H’86 H’87 H’88 H’89 H’8A
Description recordType recordSequenceNumber billType sPC sPC14 sPC24 oPC sPC14 sPC24 dPC sPC14 sPC24 sSN amountOfGTMessages recordOpeningTime recordClosingTime physicalLocation
5
3.3.23
MOCPHRecord Table 49 MOCPHRecord Tag Values Tag Value
Description
H’80 H’81 H’82 H’83
recordType servedIMSI servedIMEI servedMSISDN
H’85
calledNumber
H’88
roamingNumber
H’89
recordingEntity
ZTE Confidential Proprietary
Page 171 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’8A H’AC H’80 H’A1 H’80 H’81
mscIncomingTKGP location locationArea rncID plmnID rncID
H’AD H’30 H’A0 H’80 H’A1
H’B0 H’30 H’A0 H’83 H’82 H’81 H’82 H’B1 H’30 H’80 H’81 H’82 H’B2 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’B3 H’30 H’80 H’A1 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’94
changeOfLocation SEQUENCE OF locationAreaAndCell locationArea rncID plmnID rncID changeTime basicService bearerService teleService changeOfService SEQUENCE OF basicService bearerService teleService transparencyIndicator changeTime supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime aocParameters e1 e2 e3 e4 e5 e6 e7 changeOfAOCParms SEQUENCE OF changeTime newParameters e1 e2 e3 e4 e5 e6 e7 msClassmark
H’B5 H’30 H’80 H’81 H’96
changeOfClassmark SEQUENCE OF classmark changeTime seizureTime
H’97
answerTime
H’98
releaseTime
H’99
callDuration
H’9B
radioChanRequested
H’9C
radioChanUsed
H’80 H’81 H’81 H’AE H’83 H’82
ZTE Confidential Proprietary
Page 172 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BD
H’9E
changeOfRadioChan radioChannel changeTime speechVersionUsed causeForTerm
H’BF1F H’80 H’81 H’82 H’83 H’84 H’9F20
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’9F21
recordSequenceNumber
H’BF22 H’80 H’81 H’9F23
additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F24
gsm-SCFAddress
H’9F25
serviceKey
H’9F26
networkCallReference
H’9F27
mSCAddress
H’9F29
defaultCallHandling
H’9F31
speechVersionSupported
H’9F32
speechVersionUsed
H’9F33
numberOfDPEncountered
H’9F34
levelOfCAMELService
H’9F35
freeFormatData
H’80 H’81 H’82
ZTE Confidential Proprietary
Page 173 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BF36 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H'9A H’9F37
cAMELCPHCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter additionalChgInfo chargeIndicator chargedParty translatedNumber diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration freeFormatDataAppend
H’9F3D
systemType
H’9F45 H’9F46
partialRecordType guaranteedBitRate
H’9F47 H’9F65 H’9F66
maximumBitRate callSegmentId subscriberCategory
H’9F67
partSequenceNumber
H’9F68 H’9F69 H'9F6A H’9F6B H’9F6C
globalCallReference millisecDuration lastLongPartInd hotBillingTag isCAMELCall
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’AD H’80 H’81 H’8E H’AF H’80 H’81 H’82 H’83 H’84
3.3.24
MCFCPHRecord Table 50 MCFCPHRecord Tag Values Tag Value H’80
ZTE Confidential Proprietary
Description recordType
Page 174 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’81 H’82 H’83 H’84 H’85
servedIMSI servedIMEI servedMSISDN callingNumber calledNumber
H’89
recordingEntity
H’8A H’AE H’B1 H’30 H’80 H’81 H’82 H’96
mscIncomingTKGP basicService bearerService teleService supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime seizureTime
H’97
answerTime
H’98
releaseTime
H’99
callDuration
H’9E
causeForTerm
H’BF1F H’80 H’81 H’82 H’83 H’84 H’9F20
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’9F21
recordSequenceNumber
H’BF22 H’80 H’81 H’9F23
additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F24
gsm-SCFAddress
H’9F25
serviceKey
H’9F26
networkCallReference
H’9F27
mSCAddress
H'9F28
cAMELInitCFIndicator
H’9F29
defaultCallHandling
H’9F33
numberOfDPEncountered
H’9F34
levelOfCAMELService
H’9F35
freeFormatData
H’83 H’82
ZTE Confidential Proprietary
Page 175 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BF36 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H'9A H’9F37
cAMELCPHCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter additionalChgInfo chargeIndicator chargedParty translatedNumber diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration freeFormatDataAppend
H’9F3D
systemType
H’9F45 H’9F65 H’9F66 H’9F67
partialRecordType callSegmentId mcfType subscriberCategory
H’9F68
partSequenceNumber
H’9F69 H’9F6A H'9F6B H’9F6C H’9F6D
globalCallReference millisecDuration lastLongPartInd hotBillingTag isCAMELCall
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’AD H’80 H’81 H’8E H’AF H’80 H’81 H’82 H’83 H’84
3.3.25
TCICPHRecord Table 51 TCICPHRecord Tag Values Tag Value H’80 H’81
ZTE Confidential Proprietary
Description recordType servedIMSI
Page 176 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’82
servedMSISDN
H’83
recordingEntity
H’84 H'86
interrogationTime gsm-SCFAddress
H’87
serviceKey
H’88
networkCallReference
H’89
mSCAddress
H’8A
defaultCallHandling
H’8B
recordExtensions
H’8C H’8D H’8E H'90
calledNumber callingNumber mscIncomingTKGP seizureTime
H’91
answerTime
H’92
releaseTime
H’93
callDuration
H’95
causeForTerm
H'B6
H’97
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’98
recordSequenceNumber
H’99
numberOfDPEncountered
H’9A
levelOfCAMELService
H’9B
freeFormatData
H’80 H’81 H’82 H’83 H’84
ZTE Confidential Proprietary
Page 177 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BC H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’9D
cAMELCPHCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter additionalChgInfo chargeIndicator chargedParty translatedNumber diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration freeFormatDataAppend
H'9F2A H'9F65 H’9F66 H’9F67
partialRecordType termCallType callSegmentId partSequenceNumber
H’9F68 H’9F69 H'9F6A
globalCallReference millisecDuration lastLongPartInd
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’AD H’80 H’81 H’8E H’AF H’80 H’81 H’82 H’83 H’84 H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H'9A
3.3.26
GSICPHRecord Table 52 GSICPHRecord Tag Values Tag Value
Description
H’80 H’83
recordType servedMSISDN
H’85
calledNumber
H’89
recordingEntity
ZTE Confidential Proprietary
Page 178 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’AE H’9E
basicService bearerService teleService causeForTerm
H’BF1F H’80 H’81 H’82 H’83 H’84 H’9F20
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’9F21
recordSequenceNumber
H’BF22 H’80 H’81 H’9F23
additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F24
gsm-SCFAddress
H’9F26
networkCallReference
H’9F27
mSCAddress
H’9F29
defaultCallHandling
H’9F33
numberOfDPEncountered
H’9F34
levelOfCAMELService
H’83 H’82
ZTE Confidential Proprietary
Page 179 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BF36 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H'9A H’9F45 H’9F65 H’9F66
cAMELCPHCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter additionalChgInfo chargeIndicator chargedParty translatedNumber diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration partialRecordType callSegmentId partSequenceNumber
H’9F67 H'9F68 H’9F69
globalCallReference lastLongPartInd isCAMELCall
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’AD H’80 H’81 H’8E H’AF H’80 H’81 H’82 H’83 H’84
3.3.27
NCSCPHRecord Table 53 NCSCPHRecord Tag Values Tag Value
Description
H’80 H’81 H’82 H’83
recordType servedIMSI servedIMEI servedMSISDN
H’85
calledNumber
H’89
recordingEntity
ZTE Confidential Proprietary
Page 180 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’AE H’B1 H’30 H’80 H’81 H’82 H’9E
basicService bearerService teleService supplServicesUsed SEQUENCE OF SS-Code SSActionType ssTime causeForTerm
H’BF1F H’80 H’81 H’82 H’83 H’84 H’9F20
diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause callReference
H’9F21
recordSequenceNumber
H’BF22 H’80 H’81 H’9F23
additionalChgInfo chargeIndicator chargedParty recordExtensions
H’9F24
gsm-SCFAddress
H’9F25
serviceKey
H’9F26
networkCallReference
H’9F27
mSCAddress
H’9F29
defaultCallHandling
H’9F33
numberOfDPEncountered
H’9F34
levelOfCAMELService
H’83 H’82
ZTE Confidential Proprietary
Page 181 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2 H’BF36 H’30 H’81 H’82 H’83 H’84 H’85 H’86 H’87 H’88 H’89 H’8A H’8B H’AC
H’90 H’91 H’92 H’93 H’94 H’95 H’96 H’97 H’98 H’99 H'9A H’9F37
cAMELCPHCallLegInformation SEQUENCE OF cAMELDestinationNumber connectedNumber roamingNumber mscOutgoingTKGP seizureTime answerTime releaseTime callDuration dataVolume cAMELInitCFIndicator causeForTerm cAMELModification changeFlags changeList callingPartyNumber callingPartyCategory origCalledPartyNumber genericNumbers redirectingPartyNumber redirectionCounter additionalChgInfo chargeIndicator chargedParty translatedNumber diagnostics gsm0408Cause gsm0902MapErrorValue ccittQ767Cause networkSpecificCause manufacturerSpecificCause freeFormatData freeFormatDataAppend gsm-SCFAddress-2 serviceKey-2 defaultCallHandling-2 freeFormatData-2 freeFormatDataAppend-2 freeFormatDataIncoming-2 freeFormatDataAppendInc-2 answerReceivedInd camelInfoMillisecDuration freeFormatDataAppend
H’9F45 H’9F65 H’9F66
partialRecordType callSegmentId partSequenceNumber
H’9F67 H'9F68 H’9F69
globalCallReference lastLongPartInd isCAMELCall
H’80 H’A1 H’80 H’81 H’82 H’83 H’84 H’85 H’AD H’80 H’81 H’8E H’AF H’80 H’81 H’82 H’83 H’84
4
ANNEX
4.1
Packing of 7-bit characters If a character number is noted in the following way:
5
b7 a
b6 b
ZTE Confidential Proprietary
b5 c
b4 d
b3 e
b2 f
b1 g
Page 182 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
The packing of the 7-bitscharacters in octets is done by completing the octets with zeros on the left. For examples, packing: one character in one octet:
5
bits number: 7 6 5 4 0 1a 1b 1c two characters in two octets:
3 1d
2 1e
1 1f
0 1g
3 1d 2c
2 1e 2d
1 1f 2e
0 1g 2f
3 1d 2c 3b
2 1e 2d 3c
1 1f 2e 3d
0 1g 2f 3e
3 1d 2c 3b 4a 6g 7f 0
2 1e 2d 3c 4b 5a 7g 0
1 1f 2e 3d 4c 5b 6a 0
0 1g 2f 3e 4d 5c 6b 7a
3 1d 2c 3b 4a 6g 7f 8e
2 1e 2d 3c 4b 5a 7g 8f
1 1f 2e 3d 4c 5b 6a 8g
0 1g 2f 3e 4d 5c 6b 7a
bits number: 10
7 2g 0
6 1a 0
5 1b 2a
4 1c 2b
three characters in three octets: bits number: 15
20
7 2g 3f 0
6 1a 3g 0
5 1b 2a 0
4 1c 2b 3a
seven characters in seven octets: bits number:
25
30
7 6 5 4 2g 1a 1b 1c 3f 3g 2a 2b 4e 4f 4g 3a 5d 5e 5f 5g 6c 6d 6e 6f 7b 7c 7d 7e 0 0 0 0 eight characters in seven octets: bits number:
35
40
7 2g 3f 4e 5d 6c 7b 8a
6 1a 3g 4f 5e 6d 7c 8b
5 1b 2a 4g 5f 6e 7d 8c
4 1c 2b 3a 5g 6f 7e 8d
The bit number zero is always transmitted first. Therefore, in 140 octets, it is possible to pack (140x8)/7=160 characters.
4.2 45
Description of Version Number The version number of current document is composed of three parts separated by “.”(e.g V4.5.0) as defined below:
ZTE Confidential Proprietary
Page 183 of 204
ZTE CDR ASN.1 Format for ZXWN CS V6.4.2
Vxx.xx.xx
The third digit is incremented when editorial changes have been incorporated in the document.When the digit is changed,the billing system need not upgrade it’s software.
The second digit is incremented when adding new fields to the current CDRs or when the definition of certain field changed.When the digit is changed,the billing system should upgrade it’s software. The first digit is incremented when new CDR types have been added to current document. When the digit is changed,the billing system may upgrade it’s software if it needs the added CDR type. Figure 5 Definition of version number
ZTE Confidential Proprietary
Page 184 of 204
