Formwork Component Catalogue
Formwork Component Catalogue
L
N x 60 37,5 52,5
51
48,5
120
140
N x 125
52
52
162
172
Edition 11/2009 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)7309.950 - 0 Fax +49 (0)7309.951- 0
[email protected] www.peri.com
Important Notes: Without exception, all current safety regulations must be observed in those countries where our products are used. The illustrations in this brochure are photographs of real site situations. Safety or formwork anchor details are therefore not to be taken as a definitive guide to the way the equipment is to be used. Safety precautions and allowable loads are to be strictly observed at all times. Separate structural calculations are required for any deviations from the standard design data. The information contained herein is subject to technical changes in the interests of progress.
Content
1 5
Formwork Girders GT 24 Formwork Girder VT 20 Formwork Girder
9 38 75 93 111 126 155 165 171 179 201 211 225 237
Wall Formwork MAXIMO Panel Formwork TRIO Panel Formwork TRIO Housing Panel Formwork DOMINO Panel Formwork HANDSET Panel Formwork VARIO GT 24 Girder Wall Formwork RUNDFLEX Circular Formwork GRV Circular Formwork FTF Facade Formwork SB Brace Frame RS and RSS Push-Pull Props Tie System DW 15, 20, 26, B 15, 20 Tie System DK, SK, KK ASP Box-Out Form
243 253 263 275 281 291
Column Formwork RAPID Column Formwork QUATTRO Column Formwork TRIO Column Formwork LICO Column Formwork VARIO GT 24 Column Formwork SRS Column Formwork
299 311 319 329 341
Slab Formwork SKYDECK Panel Slab Formwork GRIDFLEX Grid Element Slab Formwork MULTIFLEX Girder Slab Formwork PERI Table Modules VT, SRU Beam Formwork UZ, AW, UZR
347 359 365 373 385
Shoring Systems MULTIPROP System PEP 10, 20, 30 Slab Props ST 100 Stacking Tower PERI UP Rosett Shoring HD 200 Heavy Duty Prop
397 413 421
Climbing Systems FB 180 Folding Platform System ASG 70-100 Platform System CB Climbing System, BR Shaft Platform
445 458 479
Scaffolding, Stairs, Working Platforms PERI UP Stairs PERI UP Rosett Modular Scaffolding PERI UP Independent Accessories
493 505
Bridge- and Tunnel Formwork Civil Construction Set VARIOKIT (Basic Comp.) GKB Cantilevered Parapet Platform
519 525 535 545 556 571
Plywood, System-Independent Accessories Plywood Construction Site Equipment Accessories for Logistics Machines and Tools Bolts, Nails, Pins Accessories
578 589 593 597
Service TRIO Cleaning, Repair (Custom Formwork) DOMINO Cleaning, Repair (Custom Formwork) SKYDECK Cleaning, Repair (Custom Formwork) Technical Planning
600 622 646
PERI Alphabetical Index Numerical Index PERI International
Formwork Girders
GT 24 Formwork Girder
Column Formwork
Wall Formwork
2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Slab Formwork
0.90 m 1.20 m 1.50 m 1.80 m 2.10 m 2.40 m 2.70 m 3.00 m 3.30 m 3.60 m 3.90 m 4.20 m 4.50 m 4.80 m 5.10 m 5.40 m 5.70 m 6.00 m
Shoring Systems
= = = = = = = = = = = = = = = = = =
Climbing Systems
l l l l l l l l l l l l l l l l l l
Scaffolding, Stairs, Working Platforms
24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
Bridge- and Tunnel Formwork
GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT
Plywood, SystemIndependent Accessories
Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder Girder
1
Service
075100 075120 075150 075180 075210 075240 075270 075300 075330 075360 075390 075420 075450 075480 075510 075540 075570 075600
Item no. Weight kg 075100 075120 075150 075180 075210 075240 075270 075300 075330 075360 075390 075420 075450 075480 075510 075540 075570 075600
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
GT 24 Formwork Girder 5,300 7,100 8,900 10,600 12,400 14,200 15,900 17,700 19,500 21,200 23,000 24,800 26,600 28,300 30,100 31,900 33,600 35,400
Girders GT 24 Nominal Lengths Girder GT 24 l = 0.90 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.80 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.70 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.90 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.80 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.70 m Girder GT 24 l = 6.00 m Universal formwork girder made of wood.
L 918 1214 1510 1806 2102 2398 2694 2990 3286 3582 3878 4174 4470 4766 5062 5358 5654 5950 Note Construction Approvel No .Z-9.1-157. The common lengths of the GT 24 are colourcoded to allow easy handling. Technical Data perm. Q = 14.0 kN perm. Q = 13.0 kN perm. M = 7.0 kNm ly = 8000 cm4 Q = perm. shear force Compression Strut Q = perm. shear force Tension Strut D
Shoring Systems
Z
D Z
Climbing Systems
L
Scaffolding, Stairs, Working Platforms
311
296
60
Service
Plywood, SystemIndependent Accessories
28 80
2
240
120
Bridge- and Tunnel Formwork
60
163
296
Service
3
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
4
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
VT 20 Formwork Girder
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6
Bridge- and Tunnel Formwork
20 l = 1.45 m 20 l = 2.15 m 20 l = 2.45 m 20 l = 2.65 m 20 l = 2.90 m 20 l = 3.30 m 20 l = 3.60 m 20 l = 3.90 m 20 l = 4.50 m 20 l = 4.90 m 20 l = 5.90 m 20K l = 1.45 m 20K l = 2.15 m 20K l = 2.45 m 20K l = 2.65 m 20K l = 2.90 m 20K l = 3,90 m 20K l = 3.30 m 20K l = 3.60 m 20K l = 4.50 m 20K l = 4.90 m 20K l = 5.90 m
Plywood, SystemIndependent Accessories
Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT
5
Service
073710 073720 073730 073740 073750 073760 073770 073780 073790 073800 073810 074990 074905 074910 074890 074920 074950 074930 074940 074960 074970 074980
Item no. Weight kg 074990 074905 074910 074890 074920 074930 074940 074950 074960 074970 074980
Column Formwork
Wall Formwork
Formwork Girders
VT 20 Formwork Girder 8,560 12,700 14,460 15,640 17,110 19,470 21,240 23,010 26,550 28,910 34,810
Girders VT 20K with Steel Cap Girder VT 20K l = 1.45 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.90 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.60 m Girder VT 20K l = 3.90 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.90 m Girder VT 20K l = 5.90 m Formwork girder made of wood. Webs are rounded for reducing damage.
L 1450 2150 2450 2650 2900 3300 3600 3900 4500 4900 5900 Note Construction Approvel No .Z-9.1-216. Technical Data perm. Q = 11.0 kN perm. M = 5.0 kNm ly = 4290 cm4
Slab Formwork
L
140
Scaffolding, Stairs, Working Platforms Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
073710 073720 073730 073740 073750 073760 073770 073780 073790 073800 073810
6
8,560 12,700 14,460 15,640 17,110 19,470 21,240 23,010 26,550 28,910 34,810
Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT Girder VT
20 20 20 20 20 20 20 20 20 20 20 20
without Steel Cap l = 1.45 m l = 2.15 m l = 2.45 m l = 2.65 m l = 2.90 m l = 3.30 m l = 3.60 m l = 3.90 m l = 4.50 m l = 4.90 m l = 5.90 m
200
40 40
120
Climbing Systems
27
100
Shoring Systems
Ø22
80
Service
140
100
100
Service
7
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
8
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
MAXIMO Panel Formwork
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
36 22 22 22 18 18 18 13 13 27 27 26 25 34 34 31 31 35 35 32 36 30 29 34 34 34 35 29 34 31 28 23 19 23 19 23 19 23 19 14 14 14 14 33
Climbing Systems
Nut Sealing Sleeve MX Ø 16 Outside Corner MXA 120 x 35 Outside Corner MXA 120 x 45 Outside Corner MXA 120 x 90 Outside Corner MXA 270 x 35 Outside Corner MXA 270 x 45 Outside Corner MXA 270 x 90 Outside Corner MXA 330 x 35 Outside Corner MXA 330 x 45 Outside Corner MXA 60 x 35 Outside Corner MXA 60 x 45 Outside Corner MXA 60 x 90 Outside Corner MXA 90 x 90 Plug MXM Ø 21 PVC Plug MX Ø 17,5 - 22 Scaffold Bracket TRG 120 Scaffold Bracket TRG 80 Sealing Cone MX 55 Sealing Sleeve MX Ø 16 Sleeve SB-MAXIMO, galv. Spanner for Sealing Sleeve MX Ø 16 Stacking Device MAXIMO, galv. Stacking Device MX Stopper MX 50 MF Stopper MX 50 OF Stopper MX 84 MF Stud Spanner MAXIMO Tension and Compression Brace MX Tie Rod Spanner MX TRIO Stripping Bar Waler 85 Wall Thickness Comp. MX 120 x 10, Alu Wall Thickness Comp. MX 270 x 10, Alu Wall Thickness Comp. MX 120 x 4 Wall Thickness Comp. MX 270 x 4 Wall Thickness Comp. MX 120 x 5 Wall Thickness Comp. MX 270 x 5 Wall Thickness Comp. MX 120 x 6 Wall Thickness Comp. MX 270 x 6 Wall Thickness Comp. MX 330 x 10, Alu Wall Thickness Comp. MX 330 x 4 Wall Thickness Comp. MX 330 x 5 Wall Thickness Comp. MX 330 x 6 Wingnut MX
Scaffolding, Stairs, Working Platforms
112338 112761 112830 112888 112667 112806 112887 114486 114478 112778 112837 112822 112889 116353 114300 023680 023670 112937 112342 114107 113183 115058 113019 114496 114503 114509 114619 115350 114290 112588 023551 114142 114128 114212 114165 114191 114186 114181 114174 114394 114842 114826 114846 112386
Bridge- and Tunnel Formwork
27 33 33 33 23 19 14 23 19 14 32 29 29 28 31 35 32 32 20 20 21 21 20 20 15 15 16 16 16 15 27 10 10 10 12 11 11 11 23 24 24 24 24 25 26 26 25 28 28 22 21 17 17 13 12 26 26 25 25 30 30 35 28 27 21 17 12
Plywood, SystemIndependent Accessories
Alignment Coupler BFD, galv. Anchors MX 15-25 Anchors MX 20-30 Anchors MX 30-40 Articulated Corner MXGA 120 Articulated Corner MXGA 270 Articulated Corner MXGA 330 Articulated Corner MXGI 120 Articulated Corner MXGI 270 Articulated Corner MXGI 330 Bolts SB-MAXIMO, galv. Brace Connector TRIO, galv. Bulkhead Tie MX DW20 Bulkhead Tie TS, galv. Concreting Platform TRIO 120 x 270 Cone MX DR 22 Connector SB-1,2 - MX/TR/D Connector SB-A, B, C - MX/TR/D Element MX 120 x 120 Element MX 120 x 240 Element MX 120 x 30 Element MX 120 x 45 Element MX 120 x 60 Element MX 120 x 90 Element MX 270 x 120 Element MX 270 x 240 Element MX 270 x 30 Element MX 270 x 45 Element MX 270 x 60 Element MX 270 x 90 Element MX 30 x 240 Element MX 330 x 120 Element MX 330 x 240 Element MX 330 x 270 Element MX 330 x 30 Element MX 330 x 45 Element MX 330 x 60 Element MX 330 x 90 Element MX 90 x 240 Element MX 90 x 30 Element MX 90 x 45 Element MX 90 x 60 Element MX 90 x 90 Elements MX 60 x 240 Elements MX 60 x 30 Elements MX 60 x 45 Elements MX 60 x 60 Hook Tie DW 15 l = 400 mm, galv. Hook Tie Head DW 15, galv. Inside Corner MXI 120 x 50/20 Inside Corner MXI 120 x 60 Inside Corner MXI 270 x 50/20 Inside Corner MXI 270 x 60 Inside Corner MXI 330 x 50/20 Inside Corner MXI 330 x 60 Inside Corner MXI 60 x 50/20 Inside Corner MXI 60 x 60 Inside Corner MXI 90 x 50/20 Inside Corner MXI 90 x 60 Lifting Gear-3 TRIO Lifting Hook MAXIMO 1.5 t Magnet Cone Spanner MX MAXIMO Waler MAR 170-2 MAXIMO Waler MAR 85-2 Multi Panel MXM 120 x 60 Multi Panel MXM 270 x 60 Multi Panel MXM 330 x 60
9
Service
023500 113847 112387 112464 111850 111872 114607 113246 113203 114583 113255 023660 115640 023640 022950 113018 027680 025740 112143 112104 112239 112232 112221 112152 112022 112006 112090 112078 112200 112045 112133 114248 114426 116454 114457 114452 114445 114258 112115 112271 112265 112259 112252 112126 112292 112286 112280 023650 023820 115299 112689 115255 112419 115338 114470 115315 112726 115307 112715 044770 115168 114797 114036 114034 112850 112849 114464
Item no. Weight kg 116454 444,000
Element MX 330 x 270 Panel with 18 mm plywood.
450
1200
Column Formwork
3300
1200
Wall Formwork
450
Formwork Girders
MAXIMO Panel Formwork
600
1500
120
600
114426
408,000
Element MX 330 x 240 Panel with 18 mm plywood.
450
Climbing Systems
1200
3300
1200
Shoring Systems
450
Slab Formwork
2700
540
1320
540
114248
226,000
Element MX 330 x 120 Panel with 18 mm plywood.
450
1200
Plywood, SystemIndependent Accessories
3300
1200
Bridge- and Tunnel Formwork
450
Scaffolding, Stairs, Working Platforms
2400
600
600
Service
1200
10
120
120
Element MX 330 x 45 Panel with 18 mm plywood. Scaffolding, Stairs, Working Platforms
300 300
225 225
Bridge- and Tunnel Formwork
Climbing Systems
1200
1200
Shoring Systems
3300
450
Element MX 330 x 60 Panel with 18 mm plywood. Slab Formwork
450
Plywood, SystemIndependent Accessories
450
1200
Column Formwork
450
3300
Wall Formwork
1200
450
Formwork Girders
Element MX 330 x 90 Panel with 18 mm plywood.
450
11
Service
450
99,800
1200
114452 118,000
3300
114445
1200
Item no. Weight kg 114258 172,000
450
MAXIMO Panel Formwork
900 120
600 120
450
120
Item no. Weight kg 114457 79,600
Element MX 330 x 30 Panel with 18 mm plywood.
450
1200
Column Formwork
3300
1200
Wall Formwork
450
Formwork Girders
MAXIMO Panel Formwork
150
150
120
133,000
Multi Panel MXM 330 x 60 Panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with 33 pc. 116353 Plug MXM Ø 21 33 pc. 113998 Sealing MXM Ø 16 450
114464
1200
100
120
450
206,000
10 x 40 = 400
Inside Corner MXI 330 x 60 Panel with 18 mm plywood. For 90° internal corners. 450
114470
480 450
12
600
120
1200 3300 1200
Plywood, SystemIndependent Accessories Service
600 100
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
3300
1200
Shoring Systems
Slab Formwork
300
Formwork Girders
MAXIMO Panel Formwork Inside Corner MXI 330 x 50/20 Panel with 18 mm plywood. For 90° internal corners.
Complete with 12 pc. 116353 Plug MXM Ø 21 12 pc. 113998 Sealing MXM Ø 16
Outside Corner MXA 330 x 45 Panel with 18 mm plywood. For 90° external corners.
114486
154,000
Outside Corner MXA 330 x 35 Panel with 18 mm plywood. For 90° external corners.
Column Formwork
120
Slab Formwork
175,000
13
Service
120
350
Plywood, SystemIndependent Accessories
3300
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
120
450
Climbing Systems
3300
Shoring Systems
114478
200
500
450
1200
3300
1200
Wall Formwork
450
Item no. Weight kg 115338 135,000
Item no. Weight kg 114583 86,600
Articulated Corner MXGI 330 Made of aluminium, for oblique angles from 75° upwards, internal.
300
120
300
114607
51,100
Articulated Corner MXGA 330 Made of aluminium, for oblique angles from 75° upwards, external.
114842 114826 114846 114394
17,800 18,900 20,200 12,100
Wall Thickness Compensations MX 330 Wall Thickness Comp. MX 330 x 4 Wall Thickness Comp. MX 330 x 5 Wall Thickness Comp. MX 330 x 6 Wall Thickness Comp. MX 330 x 10, Alu For adjusting to wall thicknesses.
B 40 50 60 100
3300
Plywood, SystemIndependent Accessories
B 60
14
120
100 62
120
Service
150
120
150
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
3300
Shoring Systems
Slab Formwork
Column Formwork
3300
Wall Formwork
Formwork Girders
MAXIMO Panel Formwork
Formwork Girders
MAXIMO Panel Formwork Element MX 270 x 240 Panel with 18 mm plywood.
Wall Formwork Column Formwork
2700
600
1500
600
Item no. Weight kg 112006 336,000
540
1320
540
120
186,000
Element MX 270 x 120 Panel with 18 mm plywood.
Shoring Systems Climbing Systems
2700
600
1500
600
112022
Slab Formwork
2400
600
600
120
Plywood, SystemIndependent Accessories
2700
Bridge- and Tunnel Formwork
600
Element MX 270 x 90 Panel with 18 mm plywood.
1500 450
450
120
900
15
Service
135,000
600
112045
Scaffolding, Stairs, Working Platforms
1200
Item no. Weight kg 112200 104,000
Element MX 270 x 60 Panel with 18 mm plywood.
2700
600
Column Formwork
1500
Wall Formwork
600
Formwork Girders
MAXIMO Panel Formwork
300
300
120
77,600
Element MX 270 x 45 Panel with 18 mm plywood.
1500 600
Climbing Systems
2700
600
112078
Shoring Systems
Slab Formwork
600
225 225
120
112090
62,800
Element MX 270 x 30 Panel with 18 mm plywood.
150
150 300
Service
2700
600
Plywood, SystemIndependent Accessories
1500
Bridge- and Tunnel Formwork
600
Scaffolding, Stairs, Working Platforms
450
16
120
Formwork Girders
MAXIMO Panel Formwork
Wall Formwork
Complete with 22 pc. 116353 Plug MXM Ø 21 22 pc. 113998 Sealing MXM Ø 16
Column Formwork
2700
1500
600 10 x 40 = 400
100
115255
102,000
Inside Corner MXI 270 x 50/20 Panel with 18 mm plywood. For 90° internal corners.
Slab Formwork
Inside Corner MXI 270 x 60 Panel with 18 mm plywood. For 90° internal corners.
Shoring Systems
156,000
Climbing Systems
600
Scaffolding, Stairs, Working Platforms
600
480
120
2700
1500
600
112419
120
600
100
Plywood, SystemIndependent Accessories
2700
1500
600
Bridge- and Tunnel Formwork
Complete with 8 pc. 116353 Plug MXM Ø 21 8 pc. 113998 Sealing MXM Ø 16
120
200
600
500
17
Service
Multi Panel MXM 270 x 60 Panel with 18 mm plywood. For oblique angles, wall connections etc.
600
Item no. Weight kg 112849 101,000
Item no. Weight kg 112887 294,000
Outside Corner MXA 270 x 90 Panel with 18 mm plywood. For 90° external corners.
Complete with 24 pc. 116353 Plug MXM Ø 21 24 pc. 113998 Sealing MXM Ø 16
120
900
2700
600
112806
145,000
Outside Corner MXA 270 x 45 Panel with 18 mm plywood. For 90° external corners.
112667
127,000
Outside Corner MXA 270 x 35 Panel with 18 mm plywood. For 90° external corners.
Service
450 120 120
350
Plywood, SystemIndependent Accessories
2700
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
2700
Shoring Systems
Slab Formwork
Column Formwork
1500
600
Wall Formwork
Formwork Girders
MAXIMO Panel Formwork
18
Formwork Girders
MAXIMO Panel Formwork Articulated Corner MXGI 270 Made of aluminium, for oblique angles from 75° upwards, internal.
300
41,800
Articulated Corner MXGA 270 Made of aluminium, for oblique angles from 75° upwards, external.
150
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
B 40 50 60 100
100 62
19
Service
B 60
120
Wall Thickness Compensations MX 270 Wall Thickness Comp. MX 270 x 4 Wall Thickness Comp. MX 270 x 5 Wall Thickness Comp. MX 270 x 6 Wall Thickness Comp. MX 270 x 10, Alu For adjusting to wall thicknesses.
120
14,700 15,700 16,800 10,000
2700
114165 114186 114174 114128
Scaffolding, Stairs, Working Platforms
120
150
Climbing Systems
2700
Shoring Systems
111872
Slab Formwork
120
300
Column Formwork
2700
Wall Formwork
Item no. Weight kg 113203 69,400
Item no. Weight kg 112104 166,000
Element MX 120 x 240 Panel with 18 mm plywood.
600
1200
Wall Formwork
600
Formwork Girders
MAXIMO Panel Formwork
540
1320
540
Column Formwork
2400
90,700
Element MX 120 x 120 Panel with 18 mm plywood.
600
1200
600
Slab Formwork
112143
Shoring Systems
600
600
120
1200
67,700
Element MX 120 x 90 Panel with 18 mm plywood.
450
Service
450
120
900
51,200
Element MX 120 x 60 Panel with 18 mm plywood.
600
112221
600
1200
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
600
1200
600
Climbing Systems
112152
300
300
600
20
120
120
Formwork Girders
MAXIMO Panel Formwork Element MX 120 x 45 Panel with 18 mm plywood.
600
1200
Wall Formwork
600
Item no. Weight kg 112232 37,100
225 225
120
Column Formwork
450
Slab Formwork
Element MX 120 x 30 Panel with 18 mm plywood.
1200 600 150
120
Shoring Systems
150 300
100
Bridge- and Tunnel Formwork 600
1200
Plywood, SystemIndependent Accessories
120
Inside Corner MXI 120 x 60 Panel with 18 mm plywood. For 90° internal corners.
600
80,500
10 x 40 = 400
120
600
1200
600 100
600
112689
Climbing Systems
Complete with 11 pc. 116353 Plug MXM Ø 21 11 pc. 113998 Sealing MXM Ø 16
Scaffolding, Stairs, Working Platforms
Multi Panel MXM 120 x 60 Panel with 18 mm plywood. For oblique angles, wall connections etc.
480
50,400
600
112850
21
Service
27,400
600
112239
Item no. Weight kg 115299 48,500
Inside Corner MXI 120 x 50/20 Panel with 18 mm plywood. For 90° internal corners.
Complete with 4 pc. 116353 Plug MXM Ø 21 4 pc. 113998 Sealing MXM Ø 16
600
Wall Formwork Column Formwork
600
120
1200
500
200
Formwork Girders
MAXIMO Panel Formwork
153,000
Outside Corner MXA 120 x 90 Panel with 18 mm plywood. For 90° external corners.
112830
70,300
Outside Corner MXA 120 x 45 Panel with 18 mm plywood. For 90° external corners.
112761
61,200
Outside Corner MXA 120 x 35 Panel with 18 mm plywood. For 90° external corners.
Complete with 12 pc. 116353 Plug MXM Ø 21 12 pc. 113998 Sealing MXM Ø 16
Service
120 350 120
1200
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
1200
450
Climbing Systems
Shoring Systems
600
120
1200
900
600
Slab Formwork
112888
22
Formwork Girders
MAXIMO Panel Formwork
300
Column Formwork
120
300
Wall Formwork
Articulated Corner MXGI 120 Made of aluminium, for oblique angles from 75° upwards, internal.
1200
Item no. Weight kg 113246 31,200
Articulated Corner MXGA 120 Made of aluminium, for oblique angles from 75° upwards, external.
150
Shoring Systems
120
150
Slab Formwork
19,000
1200
111850
B
100
120
450
Element MX 90 x 240 Panel with 18 mm plywood.
Plywood, SystemIndependent Accessories
900
121,000
450
112115
Scaffolding, Stairs, Working Platforms
Climbing Systems
B 40 50 60 100
Bridge- and Tunnel Formwork
4 5 6 10, Alu
540
1320
540
120
2400
23
Service
Wall Thickness Comp. MX 120 Wall Thickness Comp. MX 120 x Wall Thickness Comp. MX 120 x Wall Thickness Comp. MX 120 x Wall Thickness Comp. MX 120 x For adjusting to wall thicknesses.
120
6,430 6,990 7,480 4,510
1200
114212 114191 114181 114142
Item no. Weight kg 112252 48,900
Element MX 90 x 90 Panel with 18 mm plywood.
450
Wall Formwork
900
450
Formwork Girders
MAXIMO Panel Formwork
450
450
120
Column Formwork
900
36,600
Element MX 90 x 60 Panel with 18 mm plywood.
450
900
450
Slab Formwork
112259
300
300
120
Shoring Systems
600
31,200
Element MX 90 x 45 Panel with 18 mm plywood.
450
900
450
Climbing Systems
112265
Service
120
450
22,000
Element MX 90 x 30 Panel with 18 mm plywood.
900
450
112271
450
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
225 225
150
150 300
24
120
Formwork Girders
MAXIMO Panel Formwork
Complete with 4 pc. 116353 Plug MXM Ø 21 4 pc. 113998 Sealing MXM Ø 16
Column Formwork
Inside Corner MXI 90 x 50/20 Panel with 18 mm plywood. For 90° internal corners.
600
480
900 450
36,600
450
115307
Wall Formwork
120
Inside Corner MXI 90 x 60 Panel with 18 mm plywood. For 90° internal corners.
450
Item no. Weight kg 112715 68,100
Climbing Systems
450
120
900
900
Shoring Systems
88,100
Complete with 12 pc. 116353 Plug MXM Ø 21 12 pc. 113998 Sealing MXM Ø 16
540
1320
540
600
300
300
Elements MX 60 x 240 Panel with 18 mm plywood.
Scaffolding, Stairs, Working Platforms
112126
Outside Corner MXA 90 x 90 Panel with 18 mm plywood. For 90° external corners.
450
133,000
Slab Formwork
120
450
112889
200
900
500
120
300
300
600
Elements MX 60 x 60 Panel with 18 mm plywood. 300
120
600
25
Service
28,400
300
112280
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
2400
Item no. Weight kg 112286 21,900
Elements MX 60 x 45 Panel with 18 mm plywood.
300
Wall Formwork
225 225
120
450
16,200
Elements MX 60 x 30 Panel with 18 mm plywood.
600
300
112292
300
Column Formwork
600
300
Formwork Girders
MAXIMO Panel Formwork
150
150
120
112726
45,400
Inside Corner MXI 60 x 60 Panel with 18 mm plywood. For 90° internal corners.
26
200
120
900 120
300
Complete with 12 pc. 116353 Plug MXM Ø 21 12 pc. 113998 Sealing MXM Ø 16
600
Outside Corner MXA 60 x 90 Panel with 18 mm plywood. For 90° external corners.
300
Plywood, SystemIndependent Accessories Service
83,700
500
600
300
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
112822
120
Complete with 4 pc. 116353 Plug MXM Ø 21 4 pc. 113998 Sealing MXM Ø 16 300
Inside Corner MXI 60 x 50/20 Panel with 18 mm plywood. For 90° internal corners.
600
300 300
29,400
Climbing Systems
115315
600
600
Shoring Systems
Slab Formwork
300
Formwork Girders
MAXIMO Panel Formwork
Outside Corner MXA 60 x 35 Panel with 18 mm plywood. For 90° external corners.
112133
52,900
Element MX 30 x 240 Panel with 18 mm plywood.
350
34,900
1320
540
120
2400
4,350
Alignment Coupler BFD, galv. For all panel connections for MAXIMO, TRIO and RUNDFLEX. Fillers up to 10 cm.
Technical Data Permissible tension force 20.0 kN.
61
288
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Technical Data Permissible bending moment 3.9 kNm.
126
30
MAXIMO Waler MAR 85-2 For longitudinal compensation, height extensions, stopend formwork and special applications with MAXIMO. With captive connecting components.
850
30
13,800
259
115
114034
Scaffolding, Stairs, Working Platforms
164
max 220
Climbing Systems
023500
264
27
Service
540
150
300
Shoring Systems
150
Slab Formwork
120
600
112778
Column Formwork
120
Wall Formwork
450
Outside Corner MXA 60 x 45 Panel with 18 mm plywood. For 90° external corners.
600
Item no. Weight kg 112837 40,200
Item no. Weight kg 114036 23,000
MAXIMO Waler MAR 170-2 For longitudinal compensation, height extensions, stopend formwork and special applications with MAXIMO. With captive connecting components.
Technical Data Permissible bending moment 3.9 kNm.
30
126
1700
Column Formwork
264
8,520
Waler 85 Corresponds to Compensation Waler TAR 85 but without mounting hooks.
Technical Data Permissible bending moment 4.4 kNm.
105 30
023820
0,375
Hook Tie Head DW 15, galv. For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Technical Data Permissible tension force 20.0 kN.
Bridge- and Tunnel Formwork
68
30
Ø15
023650
0,769
Scaffolding, Stairs, Working Platforms
Climbing Systems
82
Hook Tie DW 15 l = 400 mm, galv. For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Technical Data Permissible tension force 20.0 kN.
20
58
400
DW 15
023640
1,140
Bulkhead Tie TS, galv. For force application from the stopend formwork in MAXIMO and TRIO elements. DW 15 thread.
Technical Data Permissible tension force 20.0 kN.
Plywood, SystemIndependent Accessories
DW 15
Service
80
30
850
440
28
140
Shoring Systems
Slab Formwork
023551
58
115
30
Wall Formwork
Formwork Girders
MAXIMO Panel Formwork
Formwork Girders
MAXIMO Panel Formwork
Wall Formwork
Bulkhead Tie MX DW20 For forming wall offsets with MAXIMO in connection with the Multi Panel MXM.
208
Item no. Weight kg 115640 6,000
255
44
Column Formwork
130
Slab Formwork
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Tension and Compression Brace MX For use with foundation formwork up to 1.20 m high and as replacement for the top anchor of the MAXIMO 330.
Complete with 1 pc. 115331 Bolt Ø 12 x 65, verz. 1 pc. 018060 Cotter Pin 4/1, galv. Note Adjustable in 0.5 cm increments from 15 to 30 cm and in 1 cm increments from 30 to 40 cm. Technical Data Permissible tension and compressive force 9 kN.
Scaffolding, Stairs, Working Platforms
6,430
174
115350
Shoring Systems
222
Ø13,2
Climbing Systems
Brace Connector TRIO, galv. For connecting push-pull props and kicker braces to MAXIMO and TRIO elements. Mounted on vertical and horizontal struts.
185
3,310
169
023660
Stacking Device MX For easy stacking of MAXIMO panels.
50
90
29
Service
0,068
110
113019
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
65
61
750
Item no. Weight kg 115058 7,490
Stacking Device MAXIMO, galv. For stacking and transportation of 2-5 MAXIMO or TRIO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
Safety Instructions Follow Instructions for Use at all times! Bearing capacity 500 kg per post, 2 t per stack.
Lifting Hook MAXIMO 1.5 t For transporting MAXIMO and TRIO elements.
Safety Instructions Follow Instructions for Use at all times! Use 2 pieces per transportation unit. Load bearing capacity: Steel elements 1.5 t Alu elements 750 kg
7,740
Slab Formwork
115168
150 60
Shoring Systems
222
325
60
110
105
Column Formwork
810
Wall Formwork
Formwork Girders
MAXIMO Panel Formwork
185
Climbing Systems
044770
Lifting Gear-3 TRIO For transporting stacks of MAXIMO and TRIO elements.
Safety Instructions Follow Instructions for Use at all times!
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
35 0 0
Plywood, SystemIndependent Accessories Service
15,600
110
30
Formwork Girders
MAXIMO Panel Formwork Item no. Weight kg Scaffold Brackets TRG Scaffold Bracket TRG 80 Scaffold Bracket TRG 120 For assembly of a working and concreting scaffold with MAXIMO and TRIO. Mounted on horizontal and vertical struts.
Note Automatically secured when connected. Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.35 m.
Wall Formwork
12,800 17,000
120
023670 023680
35
930 / 1297
Column Formwork
1051
440
65
798 / 1165
159
Note Attached from above to the element, self-securing. Always move with 4-sling lifting gear. Crane lifting gear points are marked in yellow. Technical Data Permissible load 150 kg/m2.
440
1800
Climbing Systems
Concreting Platform TRIO 120 x 270 Working and concreting platform for MAXIMO and TRIO.
440
Scaffolding, Stairs, Working Platforms
129,000
2680
112588
5,520
Bridge- and Tunnel Formwork
1330
Plywood, SystemIndependent Accessories
123
1210
996
1165
TRIO Stripping Bar
1180 Ø26
31
Service
022950
Shoring Systems
Slab Formwork
673
165
Formwork Girders
MAXIMO Panel Formwork Item no. Weight kg 027680 49,600
Connector SB-1,2 - MX/TR/D For assembly of Brace Frame SB-1.2 on MAXIMO, TRIO and DOMINO elements.
Safety Instructions Load-bearing point: capacity 1.0 t with crane sling angle ≤ 15°. 240
265
max 1650
650 490
min 1270
120
1770
Column Formwork
160
60
Wall Formwork
250
027690 027590 113255 114107
0,368 2,400 0,433 1,250
025740
9,140
Accessories Bolt Ø 19 x 165, galv. Hook Strap for SB-1, 2, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Connector SB-A, B, C - MX/TR/D For connecting MAXIMO, TRIO and DOMINO elements with Brace Frames SB-A0, A, B, C.
Note 1 piece per anchor point.
Scaffolding, Stairs, Working Platforms
Climbing Systems
120
130
Shoring Systems
Slab Formwork
21
125
027690 113255 114107
0,368 0,433 1,250
113255
0,433
130
Accessories Bolt Ø 19 x 165, SB-TRIO, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Bolts SB-MAXIMO, galv. For connecting MAXIMO elements with Brace Frames SB.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
180 127
Q45
Ø19
114107
1,250
Sleeve SB-MAXIMO, galv. For connecting MAXIMO elements with Brace Frames SB. 83
32
Ø 54
Formwork Girders
MAXIMO Panel Formwork Note Spray with release agent before every use to ensure easier striking. Technical Data Permissible tension force 90 kN.
Wall Formwork
Anchors MX 15-25 For wall thicknesses 15 - 25 cm.
196
Item no. Weight kg 113847 3,940
130
Column Formwork
688
Note Spray with release agent before every use to ensure easier striking. Technical Data Permissible tension force 90 kN.
Slab Formwork
Anchors MX 20-30 For wall thicknesses 20 - 30 cm.
738
Anchors MX 30-40 For wall thicknesses 30 - 40 cm.
Note Spray with release agent before every use to ensure easier striking. Technical Data Permissible tension force 90 kN.
Climbing Systems
4,310
Technical Data Permissible tension force 90 kN.
130
Plywood, SystemIndependent Accessories
Wingnut MX Counter nut for Tie MX.
141
33
Service
2,560
196
112386
130
Bridge- and Tunnel Formwork
838
Scaffolding, Stairs, Working Platforms
196
112464
130
Shoring Systems
4,060
196
112387
Formwork Girders
MAXIMO Panel Formwork Item no. Weight kg 114290 2,100
Tie Rod Spanner MX For easy release of the Tie MX.
116353
0,004
Plug MXM Ø 21 For MAXIMO Multi Panels MXM, Inside Corners 50/20, Outside Corners 90 and Standard Elements for single-sided application.
Ø21
Ø 24
0,017
24
PVC Plug MX Ø 17,5 - 22 For closing MX tie holes in the concrete.
Ø 32
114300
Shoring Systems
Slab Formwork
Ø15
Column Formwork
Wall Formwork
600
18
0,057
Climbing Systems
114509
Stopper MX 84 MF For closing MX tie holes in the concrete.
Note With pressing water (waterproof concrete). Test report available!
Scaffolding, Stairs, Working Platforms
30
17
82
114496
0,043
Stopper MX 50 MF For closing MX tie holes in the concrete.
Note For use with non-pressing water.
Service
30
114503
0,036
Stopper MX 50 OF For closing MX tie holes in the concrete if the flange should not be visible.
Note For use with non-pressing water.
50
17
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
17
48
34
Formwork Girders
MAXIMO Panel Formwork
132
0,183
Sealing Cone MX 55 For use with MAXIMO. Use with Anchor MX.
Note For use with waterproofed concrete or architectural concrete. Install on both sides.
Ø62
112937
Column Formwork
Wall Formwork
27
Stud Spanner MAXIMO For holding Stopper MX 84 MF and MX 50 MF. 36
Item no. Weight kg 114619 0,037
Slab Formwork
54
0,893
Shoring Systems
114797
Accessories Magnet Cone Spanner MX Magnet Cone Spanner MX For removing Sealing Cone MX 55.
Cone MX DR 22 For the use with DW 15 Tie Rods. Fitts for Spacer Tubes DR 22.
Scaffolding, Stairs, Working Platforms
0,012
21
113018
25
Climbing Systems
560
Sealing Sleeve MX Ø 16
Ø52
Plywood, SystemIndependent Accessories
Ø36
0,077
Ø16,5
112342
15
Bridge- and Tunnel Formwork
Ø 63
29
35
Service
0,893
95
114797
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Ø 34
Formwork Girders
Item no. Weight kg 112338 0,011
Ø 45
113183
36 0,556
Ø 30
200
170
Wall Formwork
MAXIMO Panel Formwork Nut Sealing Sleeve MX Ø 16
16
Spanner for Sealing Sleeve MX Ø 16
30
Service
37
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
TRIO Panel Formwork 023500 023301 023201 023200 054414 023300 106126 027690 023660 107546 054511 054512 054510 054528 054529 023640 023550 022950 027680 025740 023891 023971 107021 107009 022661 022581 054375 054519 054517 023270 023170 054384 101823 101813 101829 023450 023460 054430 023800 023010 101592 023650 023820 022660 022580 022840 054374 103284 103317 054518 107738 107793 106608 044760 044770 115168 023690 023440 023860 023980 022630 022540 054344 103330 103337 023880 023870 38
Alignment Coupler BFD, galv. Artic. Corner TRIO Structure TSGE 120 Artic. Corner TRIO Structure TSGE 270 Articulated Corner TGE 270 Articulated Corner TGE/4 330 Articulated Corner TGE120 Base Spindle TRH Bolt Ø 19 x 165, galv. Brace Connector TRIO, galv. Brace TRP 150-210, compl. Brace TRP 240-300, compl. Brace TRP 300-360, compl. Brace TRP 77-114, compl. Bracing TRP 120 Bracing TRP 240 Bulkhead Tie TS, galv. Compensation Waler TAR 85 Concreting Platform TRIO 120 x 270 Connector SB-1,2 - MX/TR/D Connector SB-A, B, C - MX/TR/D Corner Alu TAE 270/2 Corner Alu TAE 90/2 Corner Handrail TRP Corner Platform TRP Corner TRIO Structure TSE 120 Corner TRIO Structure TSE 270 Corner TRIO Structure TSE/4 330 End Guardrail Frame TRP Erection Device TRP 200, 10 kN Filler Plate LA 120 x 36 Filler Plate LA 270 x 36 Filler Plate LA/4 330 x 36 Filler Profile TPP 120, Alu Filler Profile TPP 270, Alu Filler Profile TPP 330, Alu Filler Support TPA 120 Filler Support TPA 270 Filler Support TPA 330 Foundation Strap TRIO Foundation Tie Clamp TRIO Guardrail Post Holder TRIO Hook Tie DW 15 l = 400 mm, galv. Hook Tie Head DW 15, galv. Inside Corner TE 120-2 Inside Corner TE 270-2 Inside Corner TE 60-2 Inside Corner TE/4 330 Internal Corner TEI 120/135° Internal Corner TEI 270/135° Kicker TRP Ladder 240-360 Landing TRP Landing w. Ladder TRH 90 Lifting Gear "Combi"-2 TRIO Lifting Gear-3 TRIO Lifting Hook MAXIMO 1.5 t Lifting Hook TRIO 1.5 t Lifting Pin TRIO Multi Panel Alu TAM 270 x 72 Multi Panel Alu TAM 90 x 72 Multi Panel TRM 120 x 72 Multi Panel TRM 270 x 72 Multi Panel TRM/4 330 x 72 Outside Corner TEA 120/135° Outside Corner TEA 270/135° Panel Alu TRA 270 x 30 Panel Alu TRA 270 x 60
61 61 60 48 42 53 72 64 63 71 71 71 71 71 71 62 61 66 64 64 59 60 70 70 61 60 60 73 72 54 49 44 55 50 44 55 50 44 67 66 66 63 63 53 47 57 42 54 47 71 72 73 72 67 67 68 68 68 58 60 53 47 42 54 48 58 58
023850 023900 023960 023950 022600 022514 022650 022640 022610 022620 022510 022570 022560 022550 022530 022520 022820 022810 022800 022790 054314 054304 054364 054354 054334 054324 022601 022651 022641 022621 022611 022511 022571 022561 022551 022531 022521 054315 054305 054365 054355 054335 054325 022631 022541 054345 023020 054501 054506 054500 054505 054504 054503 054502 030300 023560 107019 023590 023680 023670 026647 105524 105523 105525 750303 115058 023030
Panel Alu TRA 270 x 90 Panel Alu TRA 90 x 120 Panel Alu TRA 90 x 30 Panel Alu TRA 90 x 60 Panel TR 120 x 120 Panel TR 120 x 240 Panel TR 120 x 30 Panel TR 120 x 60 Panel TR 120 x 90 Panel TR 120 x7 2 Panel TR 270 x 120 Panel TR 270 x 240 Panel TR 270 x 30 Panel TR 270 x 60 Panel TR 270 x 72 Panel TR 270 x 90 Panel TR 60 x 30 Panel TR 60 x 60 Panel TR 60 x 72 Panel TR 60 x 90 Panel TR/4 330 x 120 Panel TR/4 330 x 240 Panel TR/4 330 x 30 Panel TR/4 330 x 60 Panel TR/4 330 x 72 Panel TR/4 330 x 90 Panel TRIO Structure TS 120 x 120 Panel TRIO Structure TS 120 x 30 Panel TRIO Structure TS 120 x 60 Panel TRIO Structure TS 120 x 72 Panel TRIO Structure TS 120 x 90 Panel TRIO Structure TS 270 x 120 Panel TRIO Structure TS 270 x 240 Panel TRIO Structure TS 270 x 30 Panel TRIO Structure TS 270 x 60 Panel TRIO Structure TS 270 x 72 Panel TRIO Structure TS 270 x 90 Panel TRIO Structure TS/4 330 x 120 Panel TRIO Structure TS/4 330 x 240 Panel TRIO Structure TS/4 330 x 30 Panel TRIO Structure TS/4 330 x 60 Panel TRIO Structure TS/4 330 x 72 Panel TRIO Structure TS/4 330 x 90 Panel TRIO Structure TSM 120 x 72 Panel TRIO Structure TSM 270 x 72 Panel TRIO Structure TSM/4 330 x 72 Perforated Foundation Tie, 25 m Platform TRP 120 Platform TRP 120 with Hatch Platform TRP 240 Platform TRP 240 with Hatch Platform TRP 60 Platform TRP 72 Platform TRP 90 Plug Ø 20/24 mm Projection Waler TVR45/45 Retainer Corner Platform TRP Scaffold Bracket TRG 100/112 Scaffold Bracket TRG 120 Scaffold Bracket TRG 80 Screw Plate DW 15/115, galv. Shaft Element TSE 120 Shaft Element TSE 270 Shaft Element TSE 330 Stacking Aid TRIO DW 20 Stacking Device MAXIMO, galv. Stopend Panel TR 120 x 24
57 59 59 59 52 51 53 52 52 52 45 45 46 46 46 45 57 57 57 56 40 40 41 41 41 40 61 61 61 61 61 60 60 60 60 60 60 60 60 60 60 60 60 61 60 60 66 69 69 69 69 69 69 69 63 62 70 65 65 65 70 55 49 43 69 68 55
Formwork Girders
TRIO Panel Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
48 43 56 56 51 51 56 56 56 56 50 50 50 50 56 56 56 56 51 51 51 51 67 63 62 61 62 54 49 54 54 49 49 43 43 43 61 61 60 60 60 60
Plywood, SystemIndependent Accessories
Stopend Panel TR 270 x 24 Stopend Panel TR/4 330 x 24 Stopend Panel TRIO AT 120 x 3 Stopend Panel TRIO AT 120 x 5 Stopend Panel TRIO AT 270 x 3 Stopend Panel TRIO AT 270 x 5 Stopend Panel TRIO MT 120 x 20 Stopend Panel TRIO MT 120 x 24/25 Stopend Panel TRIO MT 120 x 30 Stopend Panel TRIO MT 120 x 35/36 Stopend Panel TRIO MT 270 x 20 Stopend Panel TRIO MT 270 x 24/25 Stopend Panel TRIO MT 270 x 30 Stopend Panel TRIO MT 270 x 35/36 Stopend Panel TRIO MTF 120 x 20 Stopend Panel TRIO MTF 120 x 24/25 Stopend Panel TRIO MTF 120 x 30 Stopend Panel TRIO MTF 120 x 35/36 Stopend Panel TRIO MTF 270 x 20 Stopend Panel TRIO MTF 270 x 24/25 Stopend Panel TRIO MTF 270 x 30 Stopend Panel TRIO MTF 270 x 35/36 Top Tie Bracket-2 AH, galv. TRIO Stripping Bar Universal Waler 245 Waler 85 Waler Stop Wall Thickness Comp. WDA 120 x 10, Alu Wall Thickness Comp. WDA 270 x 10, Alu Wall Thickness Comp. WDA-2 120 x 5 Wall Thickness Comp. WDA-2 120 x 6 Wall Thickness Comp. WDA-2 270 x 5 Wall Thickness Comp. WDA-2 270 x 6 Wall Thickness Comp. WDA/4 330 x 10, Alu Wall Thickness Comp. WDA/4-2 330 x 5 Wall Thickness Comp. WDA/4-2 330 x 6 Wall Thickness Comp. WDAS 120 x 5, Alu Wall Thickness Comp. WDAS 120 x 6, Alu Wall Thickness Comp. WDAS 270 x 5, Alu Wall Thickness Comp. WDAS 270 x 6, Alu Wall Thickness Comp. WDAS/4 330 x 5, Alu Wall Thickness Comp. WDAS/4 330 x 6, Alu
39
Service
023040 023050 023067 105978 023060 105953 023068 023069 023071 023072 023061 023062 023064 023065 023081 023080 023078 023079 023074 023075 023077 023076 023630 112588 023920 023551 023930 023990 023995 023282 023292 023182 023192 054435 054391 054401 023281 023291 023181 023191 054395 054405
Item no. Weight kg 054304 398,000
Panel TR/4 330 x 240 Steel panel with 18 mm plywood.
475 575
1075
Column Formwork
540
1320
540
054314
195,000
Panel TR/4 330 x 120 Steel panel with 18 mm plywood.
475 575
Climbing Systems
1075
3300
600
Shoring Systems
575
Slab Formwork
2400
054324
140,000
120
Panel TR/4 330 x 90 Steel panel with 18 mm plywood.
475 575
1075
Plywood, SystemIndependent Accessories
3300
600
Bridge- and Tunnel Formwork
575
Scaffolding, Stairs, Working Platforms
1200
900
Service
3300
600
Wall Formwork
575
Formwork Girders
TRIO Panel Formwork
40
120
120
300
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
575
Panel TR/4 330 x 30 Steel panel with 18 mm plywood. Scaffolding, Stairs, Working Platforms
1075
Climbing Systems
575
475
600
575
Panel TR/4 330 x 60 Steel panel with 18 mm plywood. Slab Formwork
720
600
Shoring Systems
3300
1075
Column Formwork
575
600
Wall Formwork
475 3300
575
Formwork Girders
Panel TR/4 330 x 72 Steel panel with 18 mm plywood.
41
Service
600
74,200
475
054364 107,000
3300
054354
1075
Item no. Weight kg 054334 119,000
575
TRIO Panel Formwork
120
120
120
Multi Panel TRM/4 330 x 72 Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with 88 pc. 030300 Plug Ø 20/24 mm
575
Item no. Weight kg 054344 133,000
475 1075
Column Formwork
75
054414
119,000
120
575
19 x 30 = 570
Inside Corner TE/4 330 Steel panel with 18 mm plywood. For 90° internal corners. 575
85,800
475
300
180
575
120
1075
Climbing Systems
3300
600
Shoring Systems
475
600
575
Articulated Corner TGE/4 330 Steel panel with steel formlining. For oblique angles from 75° upwards, used externally and internally.
1075
3300
575
300
42
300
120
Slab Formwork
054374
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
720 75
Plywood, SystemIndependent Accessories Service
3300
600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork Item no. Weight kg Wall Thickness Comp. WDA/4 330 Wall Thickness Comp. WDA/4-2 330 x 5 Wall Thickness Comp. WDA/4-2 330 x 6 Wall Thickness Comp. WDA/4 330 x 10, Alu For adjusting to wall thicknesses.
Wall Formwork
B 50 60 100
Slab Formwork Climbing Systems
480
3298
Scaffolding, Stairs, Working Platforms
297
569
100
1200
1080
300
Plywood, SystemIndependent Accessories
3300
1075
475
600
Bridge- and Tunnel Formwork
575
Stopend Panel TR/4 330 x 24 Steel panel with 18 mm plywood.
575
62,300
Shoring Systems
569 100
1500
300
023050
120
120
Complete with 7 pc. 018060 Cotter Pin 4/1, galv. 7 pc. 105400 Bolt Ø 20 x 140, galv. Safety Instructions Load-bearing point capacity 2.0 t.
450
Shaft Element TSE 330 Panel for moving complete shaft internal formwork.
600
142,000
100 62
301
105525
Column Formwork
600 480
3300
480 600 570
B 60
240
120
43
Service
20,100 21,400 12,400
570
054391 054401 054435
Item no. Weight kg 054384 62,200
Filler Plate LA/4 330 x 36 For continuous compensations from 6 to 36 cm.
400
480 570
120
50
Column Formwork
054430
6,400
Filler Support TPA 330 For compensations with 21 mm filler plates.
96
45
101829
9,790
Filler Profile TPP 330, Alu For compensations with 21 mm filler plates.
Plywood, SystemIndependent Accessories
3300
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
3260
Shoring Systems
Slab Formwork
550
1030
Ø24
3300
600
Wall Formwork
570
Formwork Girders
TRIO Panel Formwork
60
Service
98
51
44
Formwork Girders
TRIO Panel Formwork Panel TR 270 x 240 Steel panel with 18 mm plywood.
Wall Formwork Column Formwork
2700
575
1550
575
Item no. Weight kg 022570 329,000
541
1320
539
120
Panel TR 270 x 120 Steel panel with 18 mm plywood.
Shoring Systems Climbing Systems
2700
1550 575
Plywood, SystemIndependent Accessories
2700
Bridge- and Tunnel Formwork
575
Panel TR 270 x 90 Steel panel with 18 mm plywood.
1550
115,000
575
022520
120
Scaffolding, Stairs, Working Platforms
1200
900
120
45
Service
162,000
575
022510
Slab Formwork
2400
Service
575
Plywood, SystemIndependent Accessories
575
Scaffolding, Stairs, Working Platforms
575
Climbing Systems
575
Slab Formwork
022550
022560
46 87,400
60,300
300
2700
1550
Shoring Systems
575
Column Formwork
720
600
Panel TR 270 x 30 Steel panel with 18 mm plywood.
120
2700
1550
Wall Formwork
575
Formwork Girders
Item no. Weight kg 022530 97,200
2700
1550
Bridge- and Tunnel Formwork
TRIO Panel Formwork Panel TR 270 x 72 Steel panel with 18 mm plywood.
120
Panel TR 270 x 60 Steel panel with 18 mm plywood.
120
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Complete with 44 pc. 030300 Plug Ø 20/24 mm
103317
57,700
Internal Corner TEI 270/135° Steel panel with 18 mm plywood. For 135° internal corners.
Slab Formwork
Inside Corner TE 270-2 Steel panel with 18 mm plywood. For 90° internal corners.
Shoring Systems
69,800
Plywood, SystemIndependent Accessories
2700
1550
575
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
300
180
575
120
Climbing Systems
2700
1550
575
022580
75
120
575
19 x 30 = 570
Column Formwork
2700
1550
720 75
189
575
120
9 18
135
°
47
Service
Multi Panel TRM 270 x 72 Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
575
Item no. Weight kg 022540 102,000
Outside Corner TEA 270/135° Steel panel with 18 mm plywood. For 135° external corners.
1550
Column Formwork
0 29
575
290
023200
94,900
135°
Articulated Corner TGE 270 Steel panel with steel formlining. For oblique angles from 75° upwards, used externally and internally.
2700
575
300
50,500
Stopend Panel TR 270 x 24 Steel panel with 18 mm plywood.
240
Service
2700
575
Plywood, SystemIndependent Accessories
1550
Bridge- and Tunnel Formwork
575
023040
48
120
300
120
1550
575
Shoring Systems
Slab Formwork
12 0
Climbing Systems Scaffolding, Stairs, Working Platforms
2700
575
Item no. Weight kg 103337 75,600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork
569 1560
300
Wall Thickness Comp. WDA 270 Wall Thickness Comp. WDA-2 270 x 5 Wall Thickness Comp. WDA-2 270 x 6 Wall Thickness Comp. WDA 270 x 10, Alu For adjusting to wall thicknesses.
B 50 60 100
Shoring Systems
16,200 17,200 10,100
Scaffolding, Stairs, Working Platforms
120
Bridge- and Tunnel Formwork
570
Filler Plate LA 270 x 36 For continuous compensations from 6 to 36 cm.
2700
1510
Ø24
Plywood, SystemIndependent Accessories
550
120
50
400
570
48,900
100 62
120
570
B 60
023170
Climbing Systems
2700
1560
570
023182 023192 023995
Slab Formwork
297
569
100
450
900
2698
Column Formwork
100
1200
300
Wall Formwork
Complete with 7 pc. 018060 Cotter Pin 4/1, galv. 7 pc. 105400 Bolt Ø 20 x 140, galv. Safety Instructions Load-bearing point capacity 2.0 t.
49
Service
Shaft Element TSE 270 Panel for moving complete shaft internal formwork.
301
Item no. Weight kg 105523 127,000
Item no. Weight kg 023460 4,710
Filler Support TPA 270 For compensations with 21 mm filler plates.
96
45
101813
8,050
Filler Profile TPP 270, Alu For compensations with 21 mm filler plates.
60
98
51
023061 023062 023064 023065
27,500 30,400 37,300 41,300
Stopend Panels TRIO MT w/o waterstop bar Stopend Panel TRIO MT 270 x 20 Stopend Panel TRIO MT 270 x 24/25 Stopend Panel TRIO MT 270 x 30 Stopend Panel TRIO MT 270 x 35/36 Centre piece without waterstop bar installation for stopend formwork.
B 118 158 218 268
2700
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
2700
Shoring Systems
Slab Formwork
Column Formwork
2660
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Service
120
B
50
Formwork Girders
TRIO Panel Formwork Item no. Weight kg B 118 158 218 268
Wall Formwork
Stopend Panel TRIO MTF w waterstop bar Stopend Panel TRIO MTF 270 x 20 Stopend Panel TRIO MTF 270 x 24/25 Stopend Panel TRIO MTF 270 x 30 Stopend Panel TRIO MTF 270 x 35/36 Centre piece with waterstop bar installation for stopend formwork.
Column Formwork
29,200 33,400 38,600 42,500
2700
023074 023075 023077 023076
17,200 19,000
Stopend Panel TRIO AT Stopend Panel TRIO AT 270 x 3 Stopend Panel TRIO AT 270 x 5 External piece for stopend formwork.
Note Concrete cover approx. 30 or 50 mm.
AT 270 x 3
AT 270 x 5 210
Scaffolding, Stairs, Working Platforms 1320
540
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
540
120
2400
51
Service
800
175 25
Panel TR 120 x 240 Steel panel with 18 mm plywood.
1200
163,000
25 175
022514
120
120
210
Climbing Systems
2700
Shoring Systems
023060 105953
Slab Formwork
120
B
Item no. Weight kg 022600 76,100
Panel TR 120 x 120 Steel panel with 18 mm plywood.
850 325
1200
Wall Formwork
25
Formwork Girders
TRIO Panel Formwork
120
Column Formwork
1200
58,200
Panel TR 120 x 90 Steel panel with 18 mm plywood.
850 325
1200
25
Slab Formwork
022610
Shoring Systems
48,600
Panel TR 120 x 72 Steel panel with 18 mm plywood.
850 325
Scaffolding, Stairs, Working Platforms
120
720
43,400
Panel TR 120 x 60 Steel panel with 18 mm plywood.
850 325
1200
25
022640
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
1200
25
Climbing Systems
022620
Service
120
900
600
52
120
Formwork Girders
TRIO Panel Formwork Panel TR 120 x 30 Steel panel with 18 mm plywood.
Wall Formwork
1200
325
850
25
Item no. Weight kg 022650 28,400
120
Column Formwork
300
Multi Panel TRM 120 x 72 Steel panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with 44 pc. 030300 Plug Ø 20/24 mm Slab Formwork
56,300
837 19 x 30
75
120
33,200
Inside Corner TE 120-2 Steel panel with 18 mm plywood. For 90° internal corners.
023300
43,600
Articulated Corner TGE120 Steel panel with steel formlining. For oblique angles from 75° upwards, used externally and internally.
120 300
300
120
834 333
1200
33
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
300
180
335
830
1200
35
022660
Climbing Systems
720
53
Service
75
Shoring Systems
333
1200
30
022630
Internal Corner TEI 120/135° Steel panel with 18 mm plywood. For 135° internal corners.
35
Item no. Weight kg 103284 26,900
120
1
89
335
830
189
1200
Wall Formwork
Formwork Girders
TRIO Panel Formwork
°
Column Formwork
135
34,900
Outside Corner TEA 120/135° Steel panel with 18 mm plywood. For 135° external corners.
1200
12 0 29
290
135°
7,610 8,090 4,680
Wall Thickness Comp. WDA 120 Wall Thickness Comp. WDA-2 120 x 5 Wall Thickness Comp. WDA-2 120 x 6 Wall Thickness Comp. WDA 120 x 10, Alu For adjusting to wall thicknesses.
550 400
1200
300 333
54
120
Filler Plate LA 120 x 36 For continuous compensations from 6 to 36 cm.
120
24,500
100
120
1200
333
300
B
534 33
Bridge- and Tunnel Formwork
023270
Plywood, SystemIndependent Accessories Service
B 50 60 100
534 33
023282 023292 023990
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
335
830
35
Slab Formwork
103330
0
Formwork Girders
TRIO Panel Formwork
566 100
300
Slab Formwork
Stopend Panel TR 120 x 24 Steel panel with 18 mm plywood.
850 325
1200
25
23,100
100
Column Formwork
632
600
1198
297 300
023030
Wall Formwork
Complete with 5 pc. 018060 Cotter Pin 4/1, galv. 5 pc. 105400 Bolt Ø 20 x 140, galv. Safety Instructions Load-bearing point capacity 2.0 t.
450
Shaft Element TSE 120 Panel for moving complete shaft internal formwork.
301
Item no. Weight kg 105524 72,600
Shoring Systems
Filler Support TPA 120 For compensations with 21 mm filler plates.
Climbing Systems
2,060
1160
023450
120
Filler Profile TPP 120, Alu For compensations with 21 mm filler plates.
Bridge- and Tunnel Formwork
60 51
Plywood, SystemIndependent Accessories
98
3,600
1200
101823
Scaffolding, Stairs, Working Platforms
96
45
55
Service
240
Item no. Weight kg 7,780 8,580
Stopend Panel TRIO AT Stopend Panel TRIO AT 120 x 3 Stopend Panel TRIO AT 120 x 5 External piece for stopend formwork.
Note Concrete cover approx. 30 or 50 mm.
210
Column Formwork Slab Formwork
11,800 13,500 16,300 18,500
Stopend Panels TRIO MT w/o waterstop bar Stopend Panel TRIO MT 120 x 20 Stopend Panel TRIO MT 120 x 24/25 Stopend Panel TRIO MT 120 x 30 Stopend Panel TRIO MT 120 x 35/36 Centre piece without waterstop bar installation for stopend formwork.
120
B
12,800 14,700 16,800 18,600
Stopend Panels TRIO MTF w. waterstop bar Stopend Panel TRIO MTF 120 x 20 Stopend Panel TRIO MTF 120 x 24/25 Stopend Panel TRIO MTF 120 x 30 Stopend Panel TRIO MTF 120 x 35/36 Centre piece with waterstop bar installation for stopend formwork.
B 120
1200
B 118 158 218 268
34,500
Panel TR 60 x 90 Steel panel with 18 mm plywood.
600
Bridge- and Tunnel Formwork
022790
Plywood, SystemIndependent Accessories Service
B 118 158 218 268
1200
023081 023080 023078 023079
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
023068 023069 023071 023072
900
56
AT 120 x 5 210
120
1200
AT 120 x 3
120
120
023067 105978
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork Panel TR 60 x 72 Steel panel with 18 mm plywood.
720
Column Formwork
Panel TR 60 x 60 Steel panel with 18 mm plywood.
120
15,600
Panel TR 60 x 30 Steel panel with 18 mm plywood.
Inside Corner TE 60-2 Steel panel with 18 mm plywood. For 90° internal corners.
023850
70,200
Panel Alu TRA 270 x 90 Aluminium panel with 18 mm plywood.
120
Scaffolding, Stairs, Working Platforms
180
600
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
2700
575
1550
575
35
530
300
18,000
35
022840
120
Climbing Systems
300
Shoring Systems
600
022820
Slab Formwork
600
900
120
57
Service
25,700
120
600
022810
Wall Formwork
600
Item no. Weight kg 022800 28,900
Item no. Weight kg 023870 49,300
Panel Alu TRA 270 x 60 Aluminium panel with 18 mm plywood.
2700
575
Column Formwork
1550
Wall Formwork
575
Formwork Girders
TRIO Panel Formwork
31,400
Panel Alu TRA 270 x 30 Aluminium panel with 18 mm plywood.
2700
1550 575
Climbing Systems
023860
60,800
Multi Panel Alu TAM 270 x 72 Alu panel with 18 mm plywood. For oblique angles, wall connections etc.
120
Complete with 44 pc. 030300 Plug Ø 20/24 mm
2700
Plywood, SystemIndependent Accessories
1550
575
Bridge- and Tunnel Formwork
720
575
75
58
19 x 30 = 570
75
120
Scaffolding, Stairs, Working Platforms
300
Service
120
575
023880
Shoring Systems
Slab Formwork
600
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Corner Alu TAE 270/2 Alu element with 18 mm plywood. For 90° internal corners.
Slab Formwork
300
Shoring Systems
Panel Alu TRA 90 x 120 Aluminium panel with 18 mm plywood.
25
850
325
120
Panel Alu TRA 90 x 60 Aluminium panel with 18 mm plywood.
Scaffolding, Stairs, Working Platforms
18,000
900
023950
Climbing Systems
1200
Panel Alu TRA 90 x 30 Aluminium panel with 18 mm plywood.
300
Plywood, SystemIndependent Accessories
10,700
900
023960
120
Bridge- and Tunnel Formwork
600
120
59
Service
33,600
900
023900
180
575
120
Column Formwork
2700
1550
575
Item no. Weight kg 023891 42,100
Multi Panel Alu TAM 90 x 72 Alu panel with 18 mm plywood. For oblique angles, wall connections etc.
Complete with 44 pc. 030300 Plug Ø 20/24 mm
75
30
120
900
19 x 30 = 570
15,200
Corner Alu TAE 90/2 Alu element with 18 mm plywood. For 90° internal corners.
054305 054315 054325 054335 054355 054365 054345 054375 054395 054405
374,000 183,000 131,000 112,000 101,000 71,100 128,000 80,200 10,800 11,700
Panels TRIO Structure TS/4 330 Panel TRIO Structure TS/4 330 x 240 Panel TRIO Structure TS/4 330 x 120 Panel TRIO Structure TS/4 330 x 90 Panel TRIO Structure TS/4 330 x 72 Panel TRIO Structure TS/4 330 x 60 Panel TRIO Structure TS/4 330 x 30 Panel TRIO Structure TSM/4 330 x 72 Corner TRIO Structure TSE/4 330 Wall Thickness Comp. WDAS/4 330 x 5, Alu Wall Thickness Comp. WDAS/4 330 x 6, Alu Panel with 21 mm base plate.
022571 022511 022521 022531 022551 022561 022541 022581 023201 023181 023191
310,000 152,000 108,000 91,600 82,700 58,100 98,900 65,400 88,700 8,850 9,560
Panels TRIO Structure TS 270 Panel TRIO Structure TS 270 x 240 Panel TRIO Structure TS 270 x 120 Panel TRIO Structure TS 270 x 90 Panel TRIO Structure TS 270 x 72 Panel TRIO Structure TS 270 x 60 Panel TRIO Structure TS 270 x 30 Panel TRIO Structure TSM 270 x 72 Corner TRIO Structure TSE 270 Artic. Corner TRIO Structure TSGE 270 Wall Thickness Comp. WDAS 270 x 5, Alu Wall Thickness Comp. WDAS 270 x 6, Alu Panel with 21 mm base plate.
35
60
120 300
180
900
35
023971
830
Column Formwork
75
Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
720
30
Item no. Weight kg 023980 23,600
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Formwork Girders
TRIO Panel Formwork Item no. Weight kg
4,350
Alignment Coupler BFD, galv. For all panel connections for MAXIMO, TRIO and RUNDFLEX. Fillers up to 10 cm.
Wall Formwork
023500
Panels TRIO Structure TS 120 Panel TRIO Structure TS 120 x 120 Panel TRIO Structure TS 120 x 90 Panel TRIO Structure TS 120 x 72 Panel TRIO Structure TS 120 x 60 Panel TRIO Structure TS 120 x 30 Panel TRIO Structure TSM 120 x 72 Corner TRIO Structure TSE 120 Artic. Corner TRIO Structure TSGE 120 Wall Thickness Comp. WDAS 120 x 5, Alu Wall Thickness Comp. WDAS 120 x 6, Alu Panel with 21 mm base plate.
Column Formwork
72,000 55,000 46,000 41,300 27,200 54,000 30,900 41,300 3,970 4,320
Technical Data Permissible tension force 20.0 kN.
61
288
12,300
Compensation Waler TAR 85 For longitudinal compensation, height extensions, stopend formwork and special applications with TRIO and MAXIMO. With captive connecting components.
259
Technical Data Permissible bending moment 4.4 kNm.
80
Scaffolding, Stairs, Working Platforms
Technical Data Permissible bending moment 4.4 kNm.
80
Plywood, SystemIndependent Accessories
61
Service
850
30
Waler 85 Corresponds to Compensation Waler TAR 85 but without mounting hooks.
105
8,520
30
023551
Bridge- and Tunnel Formwork
30
105
184
30
850
Climbing Systems
023550
Shoring Systems
164
max 220
Slab Formwork
022601 022611 022621 022641 022651 022631 022661 023301 023281 023291
Formwork Girders
TRIO Panel Formwork Item no. Weight kg 023560 8,930
Projection Waler TVR 45/45 For connecting on internal corners without using TE Corners, particularly for wall offsets. 450
Column Formwork
40
115
184
30
Wall Formwork
450
023920
78,400
Universal Waler 245 For anchoring obliques angles especially with thick walls and for special applications.
Complete with 6 pc. 024180 Compensation Washer 20, galv. 3 pc. 104178 Spacer Unit HFT 3 pc. 024910 Bolt ISO 4014 M20 x 100-8.8, galv. 3 pc. 781053 Nut ISO 7042 M20-8, galv.
Slab Formwork
2466
212 52
Shoring Systems
60
4,100
Climbing Systems
023930
140
87,5
52,5
80
Ø50
X x 60
132
Waler Stop For use with the Universal Waler 245. 44
130
024240 022030
0,805 2,170
023640
1,140
34
Accessories Wedge KZ, galv. Tie Rod Cylinder Yoke SW, galv. Bulkhead Tie TS, galv. For force application from the stopend formwork in MAXIMO and TRIO elements. DW 15 thread.
Technical Data Permissible tension force 20.0 kN.
Service
Plywood, SystemIndependent Accessories
DW 15
440
62
140
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
80
80
350
58
80
Formwork Girders
TRIO Panel Formwork
Wall Formwork
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
185
Brace Connector TRIO, galv. For connecting push-pull props and kicker braces to MAXIMO and TRIO elements. Mounted on vertical and horizontal struts.
169
Item no. Weight kg 023660 3,310
Column Formwork
222
82
30
Ø15
023650
0,769
Hook Tie DW 15 l = 400 mm, galv. For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Slab Formwork
Technical Data Permissible tension force 20.0 kN.
Shoring Systems
Hook Tie Head DW 15, galv. For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
Technical Data Permissible tension force 20.0 kN.
20
58
400
Climbing Systems
0,375
68
023820
DW 15
Note Delivery unit of 250 pieces.
Scaffolding, Stairs, Working Platforms
Plug Ø 20/24 mm For sealing tie holes Ø 20 and Ø 24mm which are not required.
Ø 29
0,003
17
030300
TRIO Stripping Bar
1180
Plywood, SystemIndependent Accessories
5,520
Ø26
63
Service
112588
Bridge- and Tunnel Formwork
20
Formwork Girders
TRIO Panel Formwork Item no. Weight kg 027680 49,600
Connector SB-1,2 - MX/TR/D For assembly of Brace Frame SB-1.2 on MAXIMO, TRIO and DOMINO elements.
Safety Instructions Load-bearing point: capacity 1.0 t with crane sling angle ≤ 15°. 240
265
max 1650
650 490
min 1270
120
1770
Column Formwork
160
60
Wall Formwork
250
027690 027590 113255 114107
0,368 2,400 0,433 1,250
025740
9,140
Accessories Bolt Ø 19 x 165, galv. Hook Strap for SB-1, 2, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Connector SB-A, B, C - MX/TR/D For connecting MAXIMO, TRIO and DOMINO elements with Brace Frames SB-A0, A, B, C.
Note 1 piece per anchor point.
Scaffolding, Stairs, Working Platforms
Climbing Systems
125
027690 113255 114107
0,368 0,433 1,250
027690
0,368
130
Accessories Bolt Ø 19 x 165, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall thickness. 165
Bridge- and Tunnel Formwork
125
Service
Plywood, SystemIndependent Accessories
Ø19
64
120
130
Shoring Systems
Slab Formwork
21
Formwork Girders
TRIO Panel Formwork Item no. Weight kg Scaffold Brackets TRG Scaffold Bracket TRG 80 Scaffold Bracket TRG 120 For assembly of a working and concreting scaffold with MAXIMO and TRIO. Mounted on horizontal and vertical struts.
Note Automatically secured when connected. Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.35 m.
Wall Formwork
12,800 17,000
120
023670 023680
35
Column Formwork
930 / 1297
1051
440
65
798 / 1165
159
max 1135
Climbing Systems
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. 1 pc. 027170 Bolt Ø 16 x 42, galv. Note When attaching to the top strut, the scaffolding platform can be cantilvered up to the front edge of the formlining. Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.35 m.
Scaffolding, Stairs, Working Platforms
976
160
Bridge- and Tunnel Formwork
105
Plywood, SystemIndependent Accessories
Scaffold Bracket TRG 100/112 For assembly of a working and concreting scaffold with TRIO and MAXIMO. Mounted on horizontal and vertical struts.
65
Service
13,000
853
023590
Shoring Systems
Slab Formwork
673
165
Guardrail Post Holder TRIO For assembling a guardrail on TRIO elements.
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Maximum width of influence 1.35 m.
100
213
302
43
Item no. Weight kg 101592 2,820
Wall Formwork
Formwork Girders
TRIO Panel Formwork
034580
3,520
022950
129,000
Accessories Guardrail Post HSGP Concreting Platform TRIO 120 x 270 Working and concreting platform for MAXIMO and TRIO.
Note Attached from above to the element, self-securing. Always move with 4-sling lifting gear. Crane lifting gear points are marked in yellow. Technical Data Permissible load 150 kg/m2.
Shoring Systems
Slab Formwork
Column Formwork
155
440
1800
440
996
123
023010
2,330
Foundation Tie Clamp TRIO For anchoring foundation formwork in combination with the Perforated Foundation Tie.
1330
171
Note Wrench size SW 14.
65
SW 14
0,676
Perforated Foundation Tie, 25 m For use with Foundation Tie Clamp TRIO, DOMINO and HANDSET.
Technical Data Permissible tension force 16.0 kN
50
023020
20
Plywood, SystemIndependent Accessories Service
1210
1165
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
2680
50
66
22
Formwork Girders
TRIO Panel Formwork
Top Tie Bracket-2 AH, galv. For grid-independent anchoring outside of the panel, especially for foundations and height extensions.
182
Technical Data Permissible anchor tension force: Hole 1 = 15 kN Hole 2 = 30 kN
Column Formwork
2,080
Wall Formwork
88
342
023630
150
Foundation Strap TRIO For connecting TRIO panels with 6 cm wide edge profiles, assembled in a "windmill" configuration.
48
Item no. Weight kg 023800 4,840
1
150
2 Ø20,5
Lifting Gear "Combi"-2 TRIO For transporting stacks of MAXIMO and TRIO elements. For attaching Lifting Hook TRIO 1.5 t and stacking devices.
Slab Formwork
26,100
Safety Instructions Follow Instructions for Use at all times.
Shoring Systems
044760
145
Safety Instructions Follow Instructions for Use at all times!
Scaffolding, Stairs, Working Platforms
Lifting Gear-3 TRIO For transporting stacks of MAXIMO and TRIO elements.
35 0 0
Bridge- and Tunnel Formwork
15,600
Plywood, SystemIndependent Accessories
044770
Climbing Systems
350 0
67
Service
100
Lifting Hook TRIO 1.5 t For transporting MAXIMO and TRIO elements.
Note Use 2 pieces per transportation unit. Safety Instructions Follow Instructions for Use at all times! Load-carrying capacity with crane sling angle ≤ 30°: Steel element 1.5 t. Aluminium element 750 kg.
60
208
523
Column Formwork
80
184
115168
7,740
Lifting Hook MAXIMO 1.5 t For transporting MAXIMO and TRIO elements.
Shoring Systems
100
Safety Instructions Follow Instructions for Use at all times! Use 2 pieces per transportation unit. Load bearing capacity: Steel elements 1.5 t Alu elements 750 kg 60
185
115058
7,490
Stacking Device MAXIMO, galv. For stacking and transportation of 2-5 MAXIMO or TRIO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
023440
0,312
Lifting Pin TRIO For easy carrying of TRIO elements.
110
Safety Instructions Follow Instructions for Use at all times! Bearing capacity 500 kg per post, 2 t per stack.
Service
150
105 18
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
810
Scaffolding, Stairs, Working Platforms
Climbing Systems
60
222
325
110
Slab Formwork
112
Item no. Weight kg 023690 7,050
Wall Formwork
Formwork Girders
TRIO Panel Formwork
68
260
Formwork Girders
TRIO Panel Formwork
Wall Formwork
25
Stacking Aid TRIO DW 20 Prevents elements sliding and protects the plywood formlining against damage.
56
Shoring Systems
1265
700
119
750 240
240
1180
Climbing Systems
L X 580 150 700 270 880 450 1180 750 2380 1950 Technical Data Permissible load 150 kg/m2.
215
X L
215
1265
Plywood, SystemIndependent Accessories
Platforms TRP Platform TRP 60 Platform TRP 72 Platform TRP 90 Platform TRP 120 Platform TRP 240 Working and concreting platform for TRIO. With 45 mm thick decking.
1050
56,700 60,400 66,600 75,000 107,000
119
054504 054503 054502 054501 054500
Slab Formwork
Column Formwork
Technical Data Permissible load 150 kg/m2.
Scaffolding, Stairs, Working Platforms
Platforms TRP with Hatch Platform TRP 120 with Hatch Platform TRP 240 with Hatch Working and concreting platform for TRIO. With 45 mm thick decking and integrated, self-closing access hatch.
Bridge- and Tunnel Formwork
90,500 131,000
1050
054506 054505
69
Service
22
Item no. Weight kg 750303 0,022
Item no. Weight kg 107009 15,000
Corner Platform TRP Working and concreting platform for TRIO. With 39 mm thick decking. As connecting platform on the external corners.
630
Wall Formwork
Formwork Girders
TRIO Panel Formwork
107019 107021 026647
0,688 16,400 0,673
107021
16,400
39
Accessories Retainer Corner Platform TRP Corner Handrail TRP Screw Plate DW 15/115, galv. Corner Handrail TRP For use with the Corner Platform TRP.
520
1561
Slab Formwork
Column Formwork
1682
Shoring Systems
990
1542
0,673
Screw Plate DW 15/115, galv. For mounting and assembling TRP, FB 180 and RUNDFLEX Plus platforms. 15
Climbing Systems
026647
Scaffolding, Stairs, Working Platforms
107019
0,688
Retainer Corner Platform TRP For connecting Corner Platform TRP to the adjacent platforms.
50
Bridge- and Tunnel Formwork
95
Service
Plywood, SystemIndependent Accessories
50
DW 15
70
60
115
100
Formwork Girders
TRIO Panel Formwork Kicker TRP For assembling TRP platforms.
Wall Formwork
40
Item no. Weight kg 054518 7,960
Column Formwork
1212
max. L 1140 1770 2670 3270
Slab Formwork
min. L 770 1070 1970 2570
Shoring Systems
Brace TRP Brace TRP 77-114, compl. Brace TRP 150-210, compl. Brace TRP 240-300, compl. Brace TRP 300-360, compl. For assembling TRP platforms.
Climbing Systems
min L
1142
Bridge- and Tunnel Formwork
Bracing TRP Bracing TRP 120 Bracing TRP 240 As hroizontal strut on the lowest panel. For mounting Ladder 240-360. 89 870
Plywood, SystemIndependent Accessories
6,260 11,200
207
054528 054529
Scaffolding, Stairs, Working Platforms
1142
71
Service
23,700 27,000 30,700 33,100
max L
054510 107546 054511 054512
Item no. Weight kg 054517 32,100
Erection Device TRP 200, 10 kN For setting up extended TRIO elements.
Wall Formwork
Formwork Girders
TRIO Panel Formwork
Column Formwork
2150
24,100
Ladder 240-360 Adjustable from 2.40 m to 3.60 m.
422
Slab Formwork
107738
N x 300 max 3710
Shoring Systems
min 2360
11,400
Climbing Systems
106608
Landing w. Ladder TRH 90 For attaching to the horizontal struts of TRIO and TRIO-H elements.
Note Maximum standing height 1.0 m.
340
621
106126
6,850
Base Spindle TRH For aligning large TRIO or TRIO-H elements.
min 34 max 353
843
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
708
Service
142
72
50
Formwork Girders
TRIO Panel Formwork Landing TRP For fixing the bottom ladder to the Platform TRP if Bracing TRP is not used.
Complete with 2 pc. 018060 Cotter Pin 4/1, galv. 2 pc. 105822 Bolt Ø 20 x 102, galv.
450
Wall Formwork
Item no. Weight kg 107793 12,900
Column Formwork
732
542
140
Note Can be used on the right and left. Slab Formwork
max 1184 min 924
Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
73
Service
End Guardrail Frame TRP For securing the front side of the Platform TRP.
1030
11,500
520
054519
Service
74
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
TRIO Housing Panel Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
87 84 84 84 84 87 90 88 89 89 85 85 85 89 82 77 86 85 85 86 84 79 83 81 83 80 83 80 82 79 78 76 78 76 81 77 86 87 90 87 88 88 84 88 89
Plywood, SystemIndependent Accessories
Anchor Bolt PERI MMS 20 x 130 Angle TRH 180 x 15 Angle TRH 180 x 6 Angle TRH 270 x 15 Angle TRH 270 x 6 Base Spindle TRH Cone Spanner TRH Extension Waler TRH 165 Guardrail Post Holder TRIO Guardrail Post HSGP Guardrail Post TRH Guardrail TRH 180 Guardrail TRH 270 Hook Tie DW 15 l = 400 mm, galv. Inside Corner TRH 330 - 66 x 66 Inside Corner TRH 420 - 66 x 66 Kicker TRH 135 Ladder TRH 264 Ladder TRH 354 Landing w. Ladder TRH 90 Outside Corner TRH 330 - 90 x 90 Outside Corner TRH 420 - 90 x 90 Panel TRH 264 x 180 A Panel TRH 264 x 180 I Panel TRH 264 x 270 A Panel TRH 264 x 270 I Panel TRH 264 x 360 A Panel TRH 264 x 360 I Panel TRH 264 x 540 A Panel TRH 264 x 540 I Panel TRH 354 x 180 A Panel TRH 354 x 180 I Panel TRH 354 x 270 A Panel TRH 354 x 270 I Panel w. Corner Platform TRH 264 x 270 I Panel w. Corner Platform TRH 354 x 270 I Prop with Kicker TRH 116 Push-Pull Prop RSS I Sealing Cone TRH 55 Spacer TRH 15-30 Tie Rod Spanner TRH SW 22 Tie TRH 15 - 30 / 99 Tool Box TRH Top Tie TRH Wingnut Pivot Plate DW 15, galv.
75
Service
103606 107607 107600 107608 107601 106126 110634 108995 101592 034580 054475 106147 106148 023650 108842 108830 108225 108566 108568 106608 108785 108808 107474 107470 107481 107480 107473 107472 107493 107492 107498 107497 107503 107502 108983 108984 054461 028010 110675 054464 108719 054480 104032 106087 030370
Formwork Girders
TRIO Housing Panel Formwork Item no. Weight kg 107502 1080,000
Panel TRH 354 x 270 I Panel with 18 mm plywood.
640
Slab Formwork
1200
3540
4383
Column Formwork
125
Wall Formwork
2650
450
900
900
450
107601
25,100
107497
753,000
Climbing Systems
Shoring Systems
2700
Accessories Angle TRH 270 x 6 Panel TRH 354 x 180 I Panel with 18 mm plywood. 906
Plywood, SystemIndependent Accessories
450
900 1800
107600 Service
3340
640
1200
Bridge- and Tunnel Formwork
3540
4383
125
Scaffolding, Stairs, Working Platforms
1043
1750
76
17,200
Accessories Angle TRH 180 x 6
450
340 470
130
Formwork Girders
TRIO Housing Panel Formwork Item no. Weight kg 108984 1090,000
Panel w. Corner Platform TRH 354 x 270 I Panel with 18 mm plywood. Can also be used as standard wall panel.
640
Slab Formwork
1200
3540
4383
Column Formwork
125
Wall Formwork
2650
450
900
900
450
600
Scaffolding, Stairs, Working Platforms
1475
Climbing Systems
Inside Corner TRH 420 - 66 x 66 Panel with 18 mm plywood. For 90° internal corners
Bridge- and Tunnel Formwork
4200
660
77
Service
Plywood, SystemIndependent Accessories
660
264,000
475
108830
Accessories Angle TRH 270 x 6
1075
25,100
575
107601
Shoring Systems
2700
Panel TRH 354 x 270 A Panel with 18 mm plywood.
125
Item no. Weight kg 107503 921,000
640
1200
Column Formwork
3540
Wall Formwork
Formwork Girders
TRIO Housing Panel Formwork
900
900
450
2700
107601 106148
25,100 29,700
107498
635,000
Accessories Angle TRH 270 x 6 Guardrail TRH 270 Panel TRH 354 x 180 A Panel with 18 mm plywood.
640
Scaffolding, Stairs, Working Platforms
1200
3540
Climbing Systems
125
Shoring Systems
Slab Formwork
450
450
900
107600
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
1800
78
17,200
Accessories Angle TRH 180 x 6
450
340
Formwork Girders
TRIO Housing Panel Formwork
Wall Formwork
Outside Corner TRH 420 - 90 x 90 Panel with 18 mm plywood. For 90° external corners.
Column Formwork
4200
1020
900
Shoring Systems
1680,000
Panel TRH 264 x 540 I Panel with 18 mm plywood.
450
900
900
900
900
900
Scaffolding, Stairs, Working Platforms
950
2640
3483
125
5350
450
Accessories Angle TRH 270 x 6
Plywood, SystemIndependent Accessories
25,100
Bridge- and Tunnel Formwork
5400
107601
Climbing Systems
107492
Slab Formwork
575
1020
1075
900
79
Service
475
600
1475
Item no. Weight kg 108808 431,000
Formwork Girders
TRIO Housing Panel Formwork Item no. Weight kg 107472 1170,000
Panel TRH 264 x 360 I Panel with 18 mm plywood.
450
900
900
900
450
3600
107600
17,200
107480
854,000
Accessories Angle TRH 180 x 6 Panel TRH 264 x 270 I Panel with 18 mm plywood. 2650
950
Scaffolding, Stairs, Working Platforms
2640
3483
125
Climbing Systems
Shoring Systems
Slab Formwork
949
2640
3483
Column Formwork
125
Wall Formwork
3550
Service
900
900 2700
107601
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
450
80
25,100
Accessories Angle TRH 270 x 6
450
Formwork Girders
TRIO Housing Panel Formwork Panel TRH 264 x 180 I Panel with 18 mm plywood.
Wall Formwork
906
450
900
450
340
1800
Shoring Systems
Panel w. Corner Platform TRH 264 x 270 I Panel with 18 mm plywood. Can also be used as standard wall panel.
Climbing Systems
2650
125 900
Scaffolding, Stairs, Working Platforms
450
Bridge- and Tunnel Formwork
900 2700
Plywood, SystemIndependent Accessories
450
81
Service
867,000
3483
108983
Accessories Angle TRH 180 x 6
2640
17,200
130
470
950
107600
Slab Formwork
950
2440
2640
3483
125
1043
1750
Column Formwork
Item no. Weight kg 107470 600,000
Inside Corner TRH 330 - 66 x 66 Panel with 18 mm plywood. For 90° internal corners 575
Item no. Weight kg 108842 213,000
475 1075
Column Formwork
575
660
660
1360,000
Panel TRH 264 x 540 A Panel with 18 mm plywood.
125
107493
950
2640
Shoring Systems
Slab Formwork
3300
600
Wall Formwork
Formwork Girders
TRIO Housing Panel Formwork
Climbing Systems
450
900
900
Scaffolding, Stairs, Working Platforms
5400
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
107601
Service
900
82
25,100
Accessories Angle TRH 270 x 6
900
900
450
Formwork Girders
Panel TRH 264 x 360 A Panel with 18 mm plywood.
950
Column Formwork
2640
125
Item no. Weight kg 107473 926,000
450
900
900
900
Wall Formwork
TRIO Housing Panel Formwork
450
3600
693,000
Slab Formwork
107481
Accessories Angle TRH 180 x 6 Panel TRH 264 x 270 A Panel with 18 mm plywood.
Shoring Systems Climbing Systems
2640 950 450
900
900
450
2700
107474
479,000
Accessories Angle TRH 270 x 6
Scaffolding, Stairs, Working Platforms
25,100
Panel TRH 264 x 180 A Panel with 18 mm plywood.
950
Plywood, SystemIndependent Accessories
2640
Bridge- and Tunnel Formwork
125
107601
450
900
450
340
1800
107600
17,200
Accessories Angle TRH 180 x 6
83
Service
17,200
125
107600
Outside Corner TRH 330 - 90 x 90 Panel with 18 mm plywood. For 90° external corners 575
Item no. Weight kg 108785 348,000
1020 900
475
900 575
1020
1075
Column Formwork
107600 107601 107607 107608
17,200 25,100 34,500 51,700
Shoring Systems
Slab Formwork
3300
600
Wall Formwork
Formwork Girders
TRIO Housing Panel Formwork
Angles TRH Angle TRH 180 x 6 Angle TRH 270 x 6 Angle TRH 180 x 15 Angle TRH 270 x 15 As bottom spacer - for example, with projecting installations.
L 1798 2698 1798 2698 Complete with 3 pc. 781053 Nut ISO 7042 M20-8, galv. 3 pc. 024910 Bolt ISO 4014 M20 x 100-8.8, galv.
L 60 / 150 90
104032
23,800
Tool Box TRH For storing accessories and tools.
Complete with 4 pc. 722308 Bolt ISO 4017 M8 x 20-8,8, galv. 4 pc. 711071 Nut ISO 7042 M8-8, galv. 4 pc. 780702 Washer ISO 7089 200 HV, A 12, galv.
400
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
M 20x100
Service
216
Plywood, SystemIndependent Accessories
900
700
84
Formwork Girders
TRIO Housing Panel Formwork Item no. Weight kg
Wall Formwork
Ladders TRH Ladder TRH 264 Ladder TRH 354 For TRH Panel. With support at bottom.
300
18,900 23,800
355
108566 108568
246
N x 280 = 1960 / 2800
Column Formwork
2281 / 3121
Guardrail Post TRH As guardrail for TRH external elements.
Note 2 pieces for panel lengths 180 and 270, 4 pieces for panel lengths 360 and 540. Slab Formwork
4,210
270
29,700
50
Guardrail TRH 270 As guardrail on TRH external elements. 40
Scaffolding, Stairs, Working Platforms
950
2680
Climbing Systems
106148
Shoring Systems
80 0
788
40 0
14 0
054475
Guardrail TRH 180 As guardrail on TRH external elements. 40
Plywood, SystemIndependent Accessories
1780
100
85
Service
23,400
950
106147
Bridge- and Tunnel Formwork
100
Item no. Weight kg 054461 19,600
Prop with Kicker TRH 116 For aligning TRH elements h = 2.64 m.
Wall Formwork Column Formwork
0
ma
900
1100 21
150
7,310
Kicker TRH 135 For aligning TRH elements h = 3.54 m and extended formwork.
1350
106608
11,400
Landing w. Ladder TRH 90 For attaching to the horizontal struts of TRIO and TRIO-H elements.
Note Maximum standing height 1.0 m.
340
Bridge- and Tunnel Formwork
621
708
86
21
150
10
100
40
Plywood, SystemIndependent Accessories Service
x1
10
108225
Shoring Systems
Slab Formwork
40
Scaffolding, Stairs, Working Platforms
Climbing Systems
1 08
28,61 °
mi n
100
Formwork Girders
TRIO Housing Panel Formwork
Formwork Girders
TRIO Housing Panel Formwork
Wall Formwork
Base Spindle TRH For aligning large TRIO or TRIO-H elements.
50
142
17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 2050
Slab Formwork
028010
Column Formwork
min 34 max 353
843
Item no. Weight kg 106126 6,850
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
0,330
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
Climbing Systems
103606
SW 30 MMS 20
Note 2 pieces with element lengths 180 and 270, 4 pieces with element lengths 360 and 540.
Bridge- and Tunnel Formwork
464
Plywood, SystemIndependent Accessories
87
Service
Spacer TRH 15-30 For adjusting the wall thickness on TRH elements at the top. For wall thicknesses from 15 to 30 cm.
50
2,330
80
054464
Scaffolding, Stairs, Working Platforms
138
Item no. Weight kg 106087 7,450
Top Tie TRH As top anchor for use with extension panels and without concreting plate. For wall thicknesses from 15 to 30 cm.
023500
4,350
054480
4,580
210
120
180
652
Accessories Alignment Coupler BFD, galv. Tie TRH 15 - 30 / 99 Formwork tie for TRH. For wall thicknesses from 15 to 30 cm.
Note Wrench size SW 46, SW 22.
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
TRIO Housing Panel Formwork
990 M30 DW 20
SW 22
Shoring Systems
SW 46
3,640
Tie Rod Spanner TRH SW 22 For Anchor TRH.
782
108995
22,100
Extension Waler TRH 165 For extending TRH elements.
Bridge- and Tunnel Formwork
122
Scaffolding, Stairs, Working Platforms
Climbing Systems
108719
1520
100
Plywood, SystemIndependent Accessories
110
Service
030370 023650
88
1,560 0,769
Accessories Wingnut Pivot Plate DW 15, galv. Hook Tie DW 15 l = 400 mm, galv.
247
1650
Formwork Girders
TRIO Housing Panel Formwork Technical Data Permissible tension force 20.0 kN.
20
58
400
Wall Formwork
Hook Tie DW 15 l = 400 mm, galv. For connecting accessories to MAXIMO and TRIO elements. DW 15 thread.
DW 15
117
Column Formwork
Technical Data Permissible load 90 kN.
72
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Maximum width of influence 1.35 m.
100
43
Guardrail Post Holder TRIO For assembling a guardrail on TRIO elements.
213
2,820
302
101592
110
Ø10
Slab Formwork
Wingnut Pivot Plate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15. With pivoting captive nut. Maximum angle of tilting 8°.
Shoring Systems
1,560
Climbing Systems
030370
155
Scaffolding, Stairs, Working Platforms
Guardrail Post HSGP As guardrail for different systems.
Bridge- and Tunnel Formwork
35
Plywood, SystemIndependent Accessories
65
1300
3,520
120
034580
Accessories Guardrail Post HSGP
440
3,520
1050
034580
89
Service
Item no. Weight kg 023650 0,769
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
100
Column Formwork
Ø 62
Wall Formwork
Formwork Girders
TRIO Housing Panel Formwork Item no. Weight kg 110675 0,172
110634
90 0,383
Sealing Cone TRH 55 For use with TRIO Housing. Use with Anchor TRH.
54
Cone Spanner TRH For removing Sealing Cone TRH 55.
112 15
Service
91
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
92
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
96 96 103 104
Climbing Systems
Wall Thickness Comp. DWD 250 x 10 Wall Thickness Comp. DWD 250 x 5 Wall Thickness Comp. DWD 75 x 5 Wedge Clamp DKS
Scaffolding, Stairs, Working Platforms
101986 066030 066068 066081
Bridge- and Tunnel Formwork
104 100 96 103 107 106 105 106 107 101 97 107 105 105 108 100 100 103 96 96 101 97 103 99 99 99 99 103 102 102 102 100 100 94 95 94 94 95 95 107 106 104 104 104 105 97 101 98 108 108 108 102 102 98 98 102 102 102 102 98 98 98 98 106 107 101 101
Plywood, SystemIndependent Accessories
Alignment Coupler DRS Articulated Corner DGE 125 Articulated Corner DGE 250 Articulated Corner DGE 75 Bolt Ø 19 x 165, galv. Brace Connector DRA Compensation Waler DAR Connector SB-1,2 - MX/TR/D Connector SB-A, B, C - MX/TR/D Filler Support DPA 125 Filler Support DPA 250 Foundation Tie Clamp DOMINO DLS Guardrail Post Holder DOMINO Guardrail Post HSGP Lifting Hook DOMINO 500 kg Multi Panel Alu DMA 125 x 75 Multi Panel DM 125 x 75 Multi Panel DM 75 x 75 Multi Panel DOMINO Alu DMA 250 x 75 Multi Panel DOMINO DM 250 x 75 Outside Corner Angle DAW 125 Outside Corner Angle DAW 250 Outside Corner Angle DAW 75 Panel D 125 x 100 Panel D 125 x 25 Panel D 125 x 50 Panel D 125 x 75 Panel D 75 x 100 Panel D 75 x 25 Panel D 75 x 50 Panel D 75 x 75 Panel DA 125 x 100 Panel DA 125 x 75 Panel DOMINO 250 x 100 Panel DOMINO 250 x 25 Panel DOMINO 250 x 50 Panel DOMINO 250 x 75 Panel DOMINO DA 250 x 100 Panel DOMINO DA 250 x 75 Perforated Foundation Tie, 25 m Plug Ø 20 mm Positioning DEA 90° Positioning DGE 135° external Positioning DGE 135° internal Scaffold Bracket DG 85 Shaft Element DSE 275 Shaft Panel DSE 125 Spindle Shaft Element DSE Stacking Aid DOMINO DSH Stacking Aid DOMINO DSW Stacking Device DOMINO, galv. Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO AT 125 x 5 Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO AT 250 x 5 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 Stopend Tie-2 DSA Top Tie Bracket DAH Wall Thickness Comp. DWD 125 x 10 Wall Thickness Comp. DWD 125 x 5
93
Service
066080 066047 066029 066067 027690 066082 066084 027680 025740 066053 066033 066090 106877 034580 066091 066052 066042 066062 066032 066024 066046 066028 066066 066040 066044 066043 066041 066060 066064 066063 066061 066050 066051 066020 066026 066025 066022 066021 066023 023020 030290 066100 066097 066095 066085 111603 111655 111665 066093 066099 066094 101934 108856 101927 108855 101935 101936 101937 101940 101928 101929 101930 101931 110406 066086 101964 066048
Formwork Girders
DOMINO Panel Formwork
Item no. Weight kg 066020 87,700
Panel DOMINO 250 x 100 Steel panel with 15 mm plywood.
71,600
117
Panel DOMINO 250 x 75 Steel panel with 15 mm plywood.
1440 530
Climbing Systems
750
066025
54,500
117
Panel DOMINO 250 x 50 Steel panel with 15 mm plywood.
530
2500
1440
Bridge- and Tunnel Formwork
530
Scaffolding, Stairs, Working Platforms
2500
530
066022
Plywood, SystemIndependent Accessories Service
2500
530 1000
Shoring Systems
Slab Formwork
Column Formwork
1440
Wall Formwork
530
Formwork Girders
DOMINO Panel Formwork
500
94
117
Formwork Girders
DOMINO Panel Formwork Panel DOMINO 250 x 25 Steel panel with 15 mm plywood.
Wall Formwork Column Formwork
2500
530
1440
530
Item no. Weight kg 066026 37,700
250
Slab Formwork
Panel DOMINO DA 250 x 100 Alu panel with 15 mm plywood.
Shoring Systems Climbing Systems
2500
1440 530
Plywood, SystemIndependent Accessories
2500
Bridge- and Tunnel Formwork
530
Panel DOMINO DA 250 x 75 Alu panel with 15 mm plywood.
1440
47,500
530
066023
117
Scaffolding, Stairs, Working Platforms
1000
750
117
95
Service
59,500
530
066021
117
Item no. Weight kg 066024 066032
76,500 50,200
Multi Panels DM/DMA 250 Multi Panel DOMINO DM 250 x 75 Multi Panel DOMINO Alu DMA 250 x 75 Steel panel with 15 mm plywood. For oblique angles, wall connections etc.
Complete with 46 pc. 030290 Plug Ø 20 mm
2500
1440
Column Formwork
530
Wall Formwork
Formwork Girders
DOMINO Panel Formwork
750 22 x 30 = 660
45
066029
39,000
Articulated Corner DGE 250 Alu panel with aluminium formlining. For oblique angles from 75°, can be used internally and externally.
530 2500
1440
Climbing Systems
250
117
250
530
066030 101986
7,820 11,600
Wall Thickness Comp. DWD 250 Wall Thickness Comp. DWD 250 x 5 Wall Thickness Comp. DWD 250 x 10 For adjusting to wall thicknesses in corners: with DOMINO.
96
50
27
100
117
530
27
117
1440
2500
530
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
250
Plywood, SystemIndependent Accessories Service
117
Complete with 2 pc. 066100 Positioning DEA 90°
Shoring Systems
Slab Formwork
530
45
Formwork Girders
DOMINO Panel Formwork
Wall Formwork
Outside Corner Angle DAW 250 For panel connections to 90° external corners.
Column Formwork
2500
Shoring Systems
Filler Support DPA 250 For compensations with 21 mm filler plates.
Climbing Systems Scaffolding, Stairs, Working Platforms
Safety Instructions Load-bearing point: capacity 2.0 t.
Bridge- and Tunnel Formwork
Shaft Element DSE 275 Element for moving complete shaft internal formwork.
500
117
148,000
2750
111603
93 / 87
45
97
Plywood, SystemIndependent Accessories
4,150
2490
066033
Slab Formwork
117
117
Service
Item no. Weight kg 066028 10,500
Item no. Weight kg 111665 4,360
Spindle Shaft Element DSE For use with Shaft Panel DSE. For spindling back to the starting position. 1 piece per Shaft Panel DSE.
Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 022230 Cotter Pin 5/1, galv. Note Wrench size SW 24.
Wall Formwork
SW 24
230
Column Formwork
150
16,200 17,900
Stopend Panels DOMINO AT Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO AT 250 x 5 External piece for stopend formwork.
248
Note Concrete cover approx. 30 or 50 mm.
2500
Shoring Systems
Slab Formwork
101927 108855
AT 250 x 3
Climbing Systems Scaffolding, Stairs, Working Platforms
27,100 31,200 36,000 39,700
Stopend Panels DOMINO MTF 250 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 With waterstop bar installation for stopend formwork.
B 118 158 218 268
2500
Bridge- and Tunnel Formwork
101928 101929 101930 101931
120
B
98
AT 250 x 5 210
117
210
Plywood, SystemIndependent Accessories Service
66
117
Formwork Girders
DOMINO Panel Formwork
Formwork Girders
DOMINO Panel Formwork Panel D 125 x 100 Steel panel with 15 mm plywood.
Wall Formwork
1250
280
930
40
Item no. Weight kg 066040 47,300
1000
Column Formwork
117
Panel D 125 x 75 Steel panel with 15 mm plywood. Slab Formwork
38,700
930 750
Climbing Systems
Panel D 125 x 50 Steel panel with 15 mm plywood.
Scaffolding, Stairs, Working Platforms
930
1250
280
Plywood, SystemIndependent Accessories
930
40
Panel D 125 x 25 Steel panel with 15 mm plywood.
1250
18,600
280
066044
117
Bridge- and Tunnel Formwork
500
250
117
99
Service
28,600
117
40
066043
Shoring Systems
40
240
1250
40
066041
Item no. Weight kg 066050 31,000
Panel DA 125 x 100 Alu panel with 15 mm plywood.
930 280
1250
Wall Formwork
40
Formwork Girders
DOMINO Panel Formwork
117
Column Formwork
1000
24,800
Panel DA 125 x 75 Alu panel with 15 mm plywood.
930 40 240
Shoring Systems
43,700 27,300
Multi Panels DM/DMA 125 Multi Panel DM 125 x 75 Multi Panel Alu DMA 125 x 75 Steel panel with 15 mm plywood. For oblique angles, wall connections etc.
117
Complete with 46 pc. 030290 Plug Ø 20 mm
Service
22 x 30 = 660
45
117
932
1250
750 45
280
066047
21,300
Articulated Corner DGE 125 Alu panel with aluminium formlining. For oblique angles from 75°, can be used internally and externally.
Complete with 1 pc. 066100 Positioning DEA 90°
40
Plywood, SystemIndependent Accessories
280
100
250
250
117
930
250
1250
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
38
Climbing Systems
750
066042 066052
1250
40
Slab Formwork
066051
Formwork Girders
DOMINO Panel Formwork Item no. Weight kg Wall Thickness Comp. DWD 125 Wall Thickness Comp. DWD 125 x 5 Wall Thickness Comp. DWD 125 x 10 For adjusting to wall thicknesses.
Wall Formwork
4,030 5,940
100
Column Formwork
27
117
50
117
27
280
930
1250
40
066048 101964
Outside Corner Angle DAW 125 For panel connections to 90° external corners. Slab Formwork
5,490
1250
066046
Climbing Systems Scaffolding, Stairs, Working Platforms
Safety Instructions Load-bearing point: capacity 2.0 t.
500
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Shaft Panel DSE 125 Element for moving complete shaft internal formwork.
101
Service
77,100
117
111655
45
93 / 87
Filler Support DPA 125 For compensations with 21mm filler plates.
1250
2,070
1240
066053
Shoring Systems
117
117
Item no. Weight kg 8,140 8,980
Stopend Panels DOMINO AT Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO AT 125 x 5 External piece for stopend formwork.
Note Concrete cover approx. 30 or 50 mm.
1250
AT 125x3
210
14,600 15,200 17,500 19,300
Stopend Panels DOMINO MTF 125 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 With waterstop bar installation support for stopend formwork.
B 118 158 218 268
B
1250
101935 101936 101937 101940
120
Shoring Systems
12,100
Panel D 75 x 25 Steel panel with 15 mm plywood.
250
Panel D 75 x 50 Steel panel with 15 mm plywood.
280
26,600
Panel D 75 x 75 Steel panel with 15 mm plywood.
102
750
066061
117
280 430 40
Plywood, SystemIndependent Accessories
500
750
Service
750
19,300
117
430 40
066063
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
280
430 40
Climbing Systems
066064
750
Slab Formwork
Column Formwork
117
210
AT 125x5
117
117
101934 108856
Wall Formwork
Formwork Girders
DOMINO Panel Formwork
Formwork Girders
DOMINO Panel Formwork
Wall Formwork
280
430 40
Panel D 75 x 100 Steel panel with 15 mm plywood.
750
1000
31,600
Multi Panel DM 75 x 75 Steel element with 15 mm plywood. For obliques angles, wall connections, stopends etc.
Complete with 23 pc. 030290 Plug Ø 20 mm
Column Formwork
066062
117
45
117
750
22 x 30 = 660
Complete with 1 pc. 066100 Positioning DEA 90°
50
Bridge- and Tunnel Formwork
117
280
Outside Corner Angle DAW 75 For panel connections to 90° external corners. 117
117
3,500
117
Climbing Systems 27
750
066066
250
Wall Thickness Comp. DWD 75 x 5 For adjusting to wall thicknesses. 430 40
2,520
250
750
066068
750
280 430 40
250
Shoring Systems
Articulated Corner DGE 75 Alu panel with aluminium formlining. For oblique angles from 75°, can be used internally and externally.
Scaffolding, Stairs, Working Platforms
12,800
Plywood, SystemIndependent Accessories
066067
Slab Formwork
280
432 38
750 45
103
Service
Item no. Weight kg 066060 32,400
120
066095
1,060
Positioning DGE 135° internal For 135° internal corners.
Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 308 M 12x40
40
Column Formwork Slab Formwork
120
60
Positioning DEA 90° For 90° internal corners.
165
Item no. Weight kg 066100 1,470
Wall Formwork
Formwork Girders
DOMINO Panel Formwork
066097
1,560
Positioning DGE 135° external For 135° external corners.
Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 470
40
Shoring Systems
M 12x40
3,630
Climbing Systems
066080
Alignment Coupler DRS For all panel connections for DOMINO. Fillers up to 12 cm. 61
288
066081
1,160
259
Wedge Clamp DKS For element connections without high loads with DOMINO.
Service
133
151
Plywood, SystemIndependent Accessories
25
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
127
max 173
109
104
Formwork Girders
DOMINO Panel Formwork
165
112 40
066085
6,570
Scaffold Bracket DG 85 For assembly of a working and concreting scaffold with DOMINO.
Technical Data Permissible load 150 kg/m2 with maximum width of influence 2.00 m. 45
Guardrail Post Holder DOMINO For assembling a guardrail on DOMINO elements.
Shoring Systems
2,730
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Maximum width of influence 2.0 m.
Climbing Systems
106877
Accessories Guardrail Post HSGP
146
213
28
3,520
349
034580
Slab Formwork
653
1044
142
Scaffolding, Stairs, Working Platforms
Guardrail Post HSGP As guardrail for different systems.
Bridge- and Tunnel Formwork
35
Plywood, SystemIndependent Accessories
65
1300
3,520
120
034580
Accessories Guardrail Post HSGP
440
3,520
1050
034580
Column Formwork
60
40
790
Wall Formwork
Compensation Waler DAR For longitudinal compensation, height extensions, stopend formwork and special applications with DOMINO. With captive connecting components.
105
Service
Item no. Weight kg 066084 8,510
Item no. Weight kg 066082 1,040
Brace Connector DRA For connecting push pull props and kicker braces to DOMINO elements.
Ø16x42
120
110406
2,100
68
117
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
98
Stopend Tie-2 DSA For force application from the stopend formwork in DOMINO elements. DW 15 thread.
95
Column Formwork
Wall Formwork
Formwork Girders
DOMINO Panel Formwork
DW 15
Plug Ø 20 mm For closing Ø 20 mm tie holes which are not required.
Note Delivery unit 500 pieces.
027680
49,600
Scaffolding, Stairs, Working Platforms
Climbing Systems
13
Connector SB-1,2 - MX/TR/D For assembly of Brace Frame SB-1.2 on MAXIMO, TRIO and DOMINO elements.
Safety Instructions Load-bearing point: capacity 1.0 t with crane sling angle ≤ 15°. 240
Service
265 650
1770
max 1650 min 1270
120
490
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
160
60
250
21
027690 027590 113255 114107
106
0,368 2,400 0,433 1,250
Accessories Bolt Ø 19 x 165, galv. Hook Strap for SB-1, 2, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv.
174
150
0,002
Ø25
030290
Ø21
Shoring Systems
Slab Formwork
443
Formwork Girders
Connector SB-A, B, C - MX/TR/D For connecting MAXIMO, TRIO and DOMINO elements with Brace Frames SB-A0, A, B, C.
Note 1 piece per anchor point.
125
0,368 0,433 1,250
027690
0,368
130
Accessories Bolt Ø 19 x 165, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv.
Column Formwork
027690 113255 114107
120
130
Item no. Weight kg 025740 9,140
Wall Formwork
DOMINO Panel Formwork
Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall thickness. Slab Formwork
165 125
066090
2,480
Foundation Tie Clamp DOMINO DLS For anchoring foundation formwork in combination with the Perforated Foundation Tie.
Shoring Systems
Ø19
Note Wrench size SW 14.
SW 14
Scaffolding, Stairs, Working Platforms
Technical Data Permissible tension force 16.0 kN
20
Top Tie Bracket DAH For grid-independent anchoring outside of the panel, especially for foundations. Ø20,5
100
Plywood, SystemIndependent Accessories
1,100
100
066086
22
Bridge- and Tunnel Formwork
50
88
107
Service
Perforated Foundation Tie, 25 m For use with Foundation Tie Clamp TRIO, DOMINO and HANDSET.
50
0,676
34
170
023020
Climbing Systems
152
Item no. Weight kg 066091 6,330
Lifting Hook DOMINO 500 kg For transporting DOMINO elements.
Wall Formwork
Note Use 2 pieces per transportation unit! Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity with crane sling angle ≤ 30° 0.5 t. 80
Stacking Aid DOMINO DSH Plastic. Prevents the element from sliding sideways. 30
0,020
100
19
066093
55
0,030
Climbing Systems
066099
Stacking Aid DOMINO DSW For stacking DOMINO elements. 4 panels per stack.
066094
7,980
Stacking Device DOMINO, galv. For stacking and transportation of 2-8 DOMINO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
50
Safety Instructions Load-bearing capacity 250 kg per ring, 1 to per stack. Follow Instructions for Use!
100
108
125
1115
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
49
50
Plywood, SystemIndependent Accessories Service
195
55 187
Shoring Systems
Slab Formwork
Column Formwork
512
112
Formwork Girders
DOMINO Panel Formwork
Service
109
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
110
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
HANDSET Panel Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
116 113 119 122 123 120 120 120 120 124 117 117 114 114 120 120 115 113 118 116 114 119 117 114 119 123 123 116 113 119 124 115 112 118 116 113 119 124 125 115 115 112 112 112 118 117 118 123 121 121 121 122 121 119 117 114 122 122 122 124 121
Plywood, SystemIndependent Accessories
Articulated Corner HSG 120 Articulated Corner HSG 150 Articulated Corner HSG 90 Brace Connector HSRA Bracket HSK 60 Bulkhead Tie HST, galv. Cam Nut DW 15, galv. Clip HSC, galv. Compensation Waler HSR 59 Crane Hook HSKA Filler Bar Steel HSAS 120 x 5 Filler Bar Steel HSAS 120 x 6 Filler Bar Steel HSAS 150 x 5 Filler Bar Steel HSAS 150 x 6 Filler Bar Steel HSAS 90 x 5 Filler Bar Steel HSAS 90 x 6 Filler Panel HSAP 120 x 15 Filler Panel HSAP 150 x 15 Filler Panel HSAP 90 x 15 Filler Plate HSLA 120 Filler Plate HSLA 150 Filler Plate HSLA 90 Filler Support HSP 120 Filler Support HSP 150 Filler Support HSP 90 Foundation Tie Clamp HANDSET HLS Guardrail Post HSGP Inside Corner HSE 120 Inside Corner HSE 150 Inside Corner HSE 90 Locking Strip HSS 60 Multi Panel HSM 120 x 45 Multi Panel HSM 150 x 45 Multi Panel HSM 90 x 45 Outside Corner Angle HSW 120 Outside Corner Angle HSW 150 Outside Corner Angle HSW 90 Pallet HS 120 x 90, galv. Pallet HS 150 x 90, galv. Panel HS 120 x 30 Panel HS 120 x 60 Panel HS 150 x 30 Panel HS 150 x 60 Panel HS 150 x 90 Panel HS 90 x 120 Panel HS 90 x 30 Panel HS 90 x 60 Perforated Foundation Tie, 25 m Plug Ø 20 mm Quick Connector HSSA 10/12, galv. Quick Connector HSSA 14/16, galv. Scaffold Bracket HSK 80 Scaffold Tube Holder HSGH Striking Fillet HSL 90 Striking Fillet HSL120 Striking Fillet HSL150 Timber Holder HSKH 22, galv. Timber Holder SKH 14, galv. Timber Strut Coupling HSRB Top Tie Bracket HSAH, galv. Wingnut Counterplate DW 15, galv.
111
Service
034230 034200 034210 034550 034570 034540 030130 034500 034510 034520 034370 034470 034320 034480 034330 034460 034280 034130 034140 034290 034170 034180 034390 034400 034410 034680 034580 034220 034150 034160 034530 034110 034100 034120 034240 034250 034260 065080 065081 034080 034070 034060 034050 034010 034020 034040 034030 023020 030290 034660 034670 034560 034690 034360 034380 034350 034620 034650 034640 034610 030110
Item no. Weight kg 034060 16,300
Panel HS 150 x 30 Panel with 12 mm plywood.
850 325
1500
Wall Formwork
325
Formwork Girders
HANDSET Panel Formwork
Column Formwork
25 250 25
80
300
28,100
Panel HS 150 x 60 Panel with 12 mm plywood.
850
Shoring Systems
325
1500
Slab Formwork
325
034050
25
550
25
80
600
39,600
Panel HS 150 x 90 Panel with 12 mm plywood.
850 325
Scaffolding, Stairs, Working Platforms
300
550
25
900
27,000
Multi Panel HSM 150 x 45 Panel with 12 mm plywood. For oblique angles, wall connections etc.
850 325
1500
325
034100
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
25
450
Service
1500
325
Climbing Systems
034010
112
80
80
Formwork Girders
HANDSET Panel Formwork
Wall Formwork
Filler Panel HSAP 150 x 15 Panel with 12 mm plywood.
1500
Item no. Weight kg 034130 12,000
80
26,400
Inside Corner HSE 150 Panel with 12 mm plywood. For 90° internal corners.
034200
36,100
Articulated Corner HSG 150 Panel with steel formlining. For oblique angles from 75°, can be used externally and internally.
200
80
113
Service
Plywood, SystemIndependent Accessories
Outside Corner Angle HSW 150 For connecting panels to 90° external corners.
80
8,160
1499
034250
Bridge- and Tunnel Formwork
80
200
Scaffolding, Stairs, Working Platforms
1500
Climbing Systems
Shoring Systems
200
120 80
1500
034150
Slab Formwork
Column Formwork
150
Item no. Weight kg 034170 11,000
Filler Plate HSLA 150 For continuous compensations from 3 to 18 cm.
1500
Wall Formwork
Formwork Girders
HANDSET Panel Formwork
Column Formwork
80
200
2,620
Striking Fillet HSL150 For easier striking of narrow shaft formwork. Conically formed. Always used in pairs.
1500
Slab Formwork
034350
46
40
58
Scaffolding, Stairs, Working Platforms
1499
Filler Support HSP 150 For compensations with 21mm filler plates.
034320 034480
10,200 10,900
Filler Bar Steel HSAS 150 Filler Bar Steel HSAS 150 x 5 Filler Bar Steel HSAS 150 x 6 For wall thickness and length adjustments.
1500
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
13
Shoring Systems
4,690
Climbing Systems
034400
80
Service
80
33
80
114
50 / 60
Formwork Girders
HANDSET Panel Formwork Panel HS 120 x 30 Panel with 12 mm plywood.
Wall Formwork
1200
325
850
25
Item no. Weight kg 034080 13,400
25 250 25
80
Column Formwork
300
Panel HS 120 x 60 Panel with 12 mm plywood. Slab Formwork
23,000
850 325
1200
25
034070
550
25
80
Shoring Systems
25
600
Climbing Systems
Multi Panel HSM 120 x 45 Panel with 12 mm plywood. For oblique angles, wall connections etc.
Scaffolding, Stairs, Working Platforms
850
1200
325
Filler Panel HSAP 120 x 15 Panel with 12 mm plywood.
Plywood, SystemIndependent Accessories
9,620
1200
034280
80
Bridge- and Tunnel Formwork
450
150
80
115
Service
22,200
25
034110
Item no. Weight kg 034220 21,300
Inside Corner HSE 120 Panel with 12 mm plywood. For 90° internal corners.
200
Column Formwork
120 80
1200
Wall Formwork
Formwork Girders
HANDSET Panel Formwork
29,100
Articulated Corner HSG 120 Panel with steel formlining. For oblique angles from 75°, can be used externally and internally.
1200
Slab Formwork
034230
200
Shoring Systems
80
200
6,540
80
80
8,770
Filler Plate HSLA 120 For continuous compensations from 3 to 18 cm.
200
80
1200
Plywood, SystemIndependent Accessories Service
Outside Corner Angle HSW 120 For connecting panels to 90° external corners.
1199
034290
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
034240
116
Formwork Girders
HANDSET Panel Formwork
Wall Formwork
Striking Fillet HSL120 For easier striking of narrow shaft formwork. Conically formed. Always used in pairs.
1200
Item no. Weight kg 034380 2,200
80
Column Formwork
46
13
33
80
Filler Support HSP 120 For compensations with 21mm filler plates. Slab Formwork
3,750
1199
034390
Climbing Systems
Filler Bar Steel HSAS 120 Filler Bar Steel HSAS 120 x 5 Filler Bar Steel HSAS 120 x 6 For wall thickness and length adjustments.
25 250 25
Bridge- and Tunnel Formwork
550 25
Panel HS 90 x 30 Panel with 12 mm plywood.
900 80
300
Plywood, SystemIndependent Accessories
10,400
25 300
034040
50 / 60
Scaffolding, Stairs, Working Platforms
80
117
Service
8,220 8,720
1200
034370 034470
Shoring Systems
58
40
25
25 300
550 25
Panel HS 90 x 60 Panel with 12 mm plywood.
900
Item no. Weight kg 034030 17,900
Wall Formwork
Formwork Girders
HANDSET Panel Formwork
550
25
80
Column Formwork
600
32,500
Panel HS 90 x 120 Panel with 12 mm plywood.
325
850
Shoring Systems
17,600
Multi Panel HSM 90 x 45 Panel with 12 mm plywood. For oblique angles, wall connections etc.
900
450
7,560
80
Filler Panel HSAP 90 x 15 Panel with 12 mm plywood.
900
034140
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
25
850
25
Climbing Systems
034120
Service
25
1200
150
118
80
25
900
300 250 300
Slab Formwork
25
034020
80
Formwork Girders
HANDSET Panel Formwork
200
120 80
Articulated Corner HSG 90 Steel panel with steel formlining. For oblique angles from 75° upwards, used externally and internally.
Column Formwork
22,000
200
200
Outside Corner Angle HSW 90 For connecting panels to 90° external corners.
80
80
Shoring Systems
4,920
899
034260
Slab Formwork
80
900
034210
Wall Formwork
Inside Corner HSE 90 Panel with 12 mm plywood. For 90° internal corners.
900
Item no. Weight kg 034160 16,200
Filler Plate HSLA 90 For continuous compensations from 3 to 18 cm.
Climbing Systems
6,570
200
Plywood, SystemIndependent Accessories
13
Filler Support HSP 90 For compensations with 21mm filler plates.
40
119
Service
2,810
899
034410
46
80
33
80
Bridge- and Tunnel Formwork
Striking Fillet HSL 90 For easier striking of narrow shaft formwork. Conically formed. Always used in pairs.
58
1,560
900
034360
Scaffolding, Stairs, Working Platforms
80
900
034180
Item no. Weight kg 034330 034460
6,200 6,600
Filler Bar Steel HSAS 90 Filler Bar Steel HSAS 90 x 5 Filler Bar Steel HSAS 90 x 6 For wall thickness and length adjustments.
900
Wall Formwork
Formwork Girders
HANDSET Panel Formwork
50 / 60
Column Formwork
80
034500
0,380
Clip HSC, galv. For all panel connections for HANDSET.
50
34
62
034510
5,490
Compensation Waler HSR 59 For longitudinal compensation, height extensions, stopend formwork and special applications with HANDSET. With captive connecting components.
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
110
185
30
160
30
034540
0,812
Scaffolding, Stairs, Working Platforms
Bulkhead Tie HST, galv. For stopend formwork and as tensile locking for length compensations up to 20 cm. DW 15
20
Climbing Systems
590
40
30
290
030130
0,318
030130
0,318
Accessories Cam Nut DW 15, galv. Cam Nut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN. 50
50
SW 27
Service
DW 15
120
53
Shoring Systems
Slab Formwork
125
Formwork Girders
HANDSET Panel Formwork Wingnut Counterplate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN. 96
Wall Formwork
Item no. Weight kg 030110 0,799
50
110
SW 27
Note Delivery unit 500 pieces. Slab Formwork
Plug Ø 20 mm For closing Ø 20 mm tie holes which are not required.
Ø25
0,002
Ø21
030290
Column Formwork
DW 15
Scaffold Tube Holder HSGH For assembling scaffold tubes Ø 48 mm for aligning the formwork.
34
Scaffolding, Stairs, Working Platforms
Quick Connectors HSSA, verz. Quick Connector HSSA 10/12, galv. Quick Connector HSSA 14/16, galv. For assembly of timbers 12 x 10 cm or 12 x 12 cm as well as timbers or girders 20 x 10 cm for aligning the formwork. With captive wedge. 100 / 120 140 / 160
Bridge- and Tunnel Formwork
210 / 250
Plywood, SystemIndependent Accessories
121
Service
260
1,470 1,650
132
125
034660 034670
Climbing Systems
Ø19
60
0,531
117
034690
Shoring Systems
13
Item no. Weight kg 034650 034620
0,200 0,260
Timber Holder HSKH, verz. Timber Holder SKH 14, galv. Timber Holder HSKH 22, galv. For assembly of timbers 12 x 10 cm and timbers or girders 20 x 10 cm for aligning the formwork.
Wall Formwork
102
179 / 259
Column Formwork
34
Formwork Girders
HANDSET Panel Formwork
1,120
Brace Connector HSRA For connecting push-pull props and kicker braces to HANDSET elements.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Shoring Systems
Slab Formwork
034550
122
180
60
Ø16x42
034640
1,100
Timber Strut Coupling HSRB For assembling alignment boards. Mounted to the HSRA Brace Connector.
60 Ø5
6
Ø17
034560
4,920
Scaffolding, Stairs, Working Platforms
Climbing Systems
400
Scaffold Bracket HSK 80 For assembly of a working and concreting scaffold with HANDSET.
Note Automatically secured when connected. Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.50 m. 923
86
Service
Plywood, SystemIndependent Accessories
034580
122
3,520
Accessories Guardrail Post HSGP
489
Bridge- and Tunnel Formwork
410
120
10
Bracket HSK 60 For erection of a working scaffold at low formworking heights.
Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.50 m. 895
86
1001
Column Formwork
40
600
380
40
10
Wall Formwork
Item no. Weight kg 034570 9,320
Formwork Girders
HANDSET Panel Formwork
Guardrail Post HSGP As guardrail for different systems. Slab Formwork
3,520
35
Shoring Systems
65
1300
1050
440
120
034580
Foundation Tie Clamp HANDSET HLS For anchoring foundation formwork in combination with the Perforated Foundation Tie.
Note Wrench size SW 14.
Climbing Systems
2,580
349
034680
90
Scaffolding, Stairs, Working Platforms
SW 14
Technical Data Permissible tension force 16.0 kN
Plywood, SystemIndependent Accessories
50
22
123
Service
Perforated Foundation Tie, 25 m For use with Foundation Tie Clamp TRIO, DOMINO and HANDSET.
50
0,676
20
023020
152
Bridge- and Tunnel Formwork
43 84
Top Tie Bracket HSAH, galv. For grid-independent anchoring outside of the panel, especially for foundations.
90
0,681
60
034610
5
35
784
82
Column Formwork
55
Locking Strip HSS 60 As top anchor point for foundations. Wall thicknesses from 15 to 60 cm in 5 cm increments. 80
Item no. Weight kg 034530 1,910
Wall Formwork
Formwork Girders
HANDSET Panel Formwork
034520
4,520
Crane Hook HSKA For transporting HANDSET elements.
Shoring Systems
Slab Formwork
70
110
Note Use 2 pieces per transportation unit. Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity with crane sling angle ≤ 30° 0.5 t.
340
Pallet HS 120 x 90, galv. For stacking and transportation of HANDSET elements.
Safety Instructions Load-carrying capacity 750 kg. Follow Instructions for Use at all times!
820
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
64,700
72
124
1070
065080
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø16
1210
910
1360
1030
Formwork Girders
HANDSET Panel Formwork
Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms
1030
Bridge- and Tunnel Formwork
910
1580
Plywood, SystemIndependent Accessories
1510
125
Service
1240
Wall Formwork
Safety Instructions Follow Instructions for Use! Load-bearing capacity 750 kg.
820
Pallet HS 150 x 90, galv. For stacking and transportation of HANDSET elements.
1070
Item no. Weight kg 065081 66,300
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
VARIO GT 24 Girder Wall Formwork 010350 022400 103054 013220 013210 013230 072220 072140 104929 107185 103518 104031 013240 031200 100541 013130 013140 013180 027070 027060 022410 018060 024220 013010 021980 021990 111238 070760 010180 010270 010190 072240 022380 022440 072150 710001 103932 072160 024480 104027 103992 710240 024140 024630 030260 101706 024600 028050 028070 103865 034580 112159 027590 024070 024080 104930 104096 104931 103845 010200 107738 024270 024260 024090 072230 101395 103850 126
Additional Row of SRZ Slots Adjusting Spindle RKR, compl.. Articulated Coupling GKS 60/60 S Articulated Coupling GKZ 60/60 Articulated Coupling GKZ 76/76 Articulated Coupling GKZ Spec. Length Bit Holder for SCU 7-9 Bit Point TX 30 Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 180-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Bolt Ø 21 x 120 Bulkhead Tie Chamfer Strip with Flange l = 2.50 m Connector for Platform VARIO Corner Coupling EKZ 76/76 Corner Coupling EKZ 95/43 Corner Coupling EKZ Spec. Length Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, right Corner Spindle RKR Cotter Pin 4/1, galv. Coupling Compression Plate KDP Coupling VKZ 99 Crane Eye 24, left Crane Eye 24, right Crane Hook 2 t / GT 24 Crane Splice GT 24 Cross Waler KRZ U-100 Spec. Length Cross Waler KRZ U-120 Spec. Length Cross Waler KRZ U-140, Spec. Length Depth Chuck for SCU 7-9 Double Spindle with Wheel RKR Double Spindle without Wheel RKR Electric Power Wrench M 14, ASB 636 End Plate SRZ End Platform VARIO Extension 1/2" l = 250 mm Extension Splice 24-2 Extension VARIO 24 U120 External Corner Platform VARIO F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. Fix Strap U100-120, galv. Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/40 l = 3.00 m Girder Claw HB U100-U120, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24/A, galv. Guardrail for End Platform VARIO Guardrail Post HSGP Handrail Post Holder VARIO Hook Strap for SB-1, 2, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-140/160, galv. Hook Strap Uni Double HBUD 20-24 Hook Strap Uni Double HBUD 24-28 Hook Strap Uni HBU 20-24 Hook Strap Uni HBU 24-28 Internal Corner Waler IRZ 75/75 Ladder 240-360 Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 80, galv. Nut ISO 4032 M 8-8, galv. Magnetic Holder for SCU Offset Coupling VVKZ 3/99 Outside Corner Coupling AKZ 85/85
133 153 141 140 140 140 138 138 137 137 137 142 142 143 150 140 140 140 147 147 153 142 143 139 146 146 146 146 134 134 134 138 152 152 138 133 149 139 145 135 149 136 136 136 143 143 136 144 144 149 151 148 145 136 136 137 137 137 137 134 152 138 138 136 138 139 140
701991 105480 105484 105823 100813 101273 101269 103203 102415 102920 105986 105985 072210 101404 101319 101318 101311 101464 025200 025210 025220 025230 025240 025250 024640 072180 027110 071218 071219 103844 072170 010600 010030 010610 010060 010070 010050 010120 010080 010150 010090 103868 103871 103874 103877 103886 103889 103898 103892 103929 103903 103906 103915 103918 103922 103925 103928 103943 010440 010420 057050 024210 024470 110272 024690 022340 022350
Plate Fl 50 x 20 x 120, ESP Platform Beam VARIO, left Platform Beam VARIO, right Platform Bracket VARIO VBK 90 Platform Guardrail 80 Platform Strut 167 VARIO Platform Strut 246 VARIO Platform VARIO 100/100 Platform VARIO 100/125 with Hatch Platform VARIO 100/187.5 Platform VARIO 100/250 Platform VARIO 100/250 with Hatch Power-Screwdriver SCU 7-9 Protection Board 100 Protection Board 125 Protection Board 187.5 Protection Board 250 Protection Board IE 75/75 Quick Release Corner SSE 1,0 m Quick Release Corner SSE 2,0 m Quick Release Corner SSE 3,0 m Quick Release Corner SSE 4,0 m Quick Release Corner SSE 5,0 m Quick Release Corner SSE Spec. Leng Quick Str. Hook Strap 24-100/140, galv. Ratchet Wrench 1/2" Scaffold Bracket GB 80 Screw Change HB, incl. Screws Screw Change HBU, HBUD Sleeve HBU/HBUD, galv. Socket SW 13-1/2" l = 80 mm Steel Waler SRZ U-100 l = 0.95m Steel Waler SRZ U-100 l = 1.20m Steel Waler SRZ U-100 l = 1.45m Steel Waler SRZ U-100 l = 1.825m Steel Waler SRZ U-100 l = 1.95m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 2.95m Steel Waler SRZ U-100 Spec. Length Steel Waler SRZ U-120 Spec. Length Steel Waler SRZ U-140 Spec. Length Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-140 l = 4.97 m Steel Waler VSRZ-24 U-100 l = 1.20/12 Steel Waler VSRZ-24 U-100 l = 2.45/12 Suspension Tube Vario 53 Tie Yoke SKZ TSS-Torx 6 x 60, galv. TSS-Torx 6 x 60, ZKS, galv. TSS-Torx 6 x 80, galv. Tunnel Frame Wale RKR U 160 Tunnel Frame Wale RKR U 180
153 151 151 151 150 150 150 148 148 148 148 148 138 131 130 129 128 132 144 144 144 144 144 144 136 139 147 136 137 137 139 133 133 133 133 133 133 133 133 133 133 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 134 134 147 142 137 137 137 152 152
Formwork Girders
VARIO GT 24 Girder Wall Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
152 152 152 141 141 141 139 139 139 132 132 132 132 132 131 131 131 131 131 131 131 130 130 130 130 130 130 130 129 129 129 129 129 129 129 128 128 128 128 128 128 128 145 143 143 134 152 134 134
Plywood, SystemIndependent Accessories
Tunnel Frame Wale RKR U100 Tunnel Frame Wale RKR U120 Tunnel Frame Wale RKR U140 Universal Coupling UK 70 VARIO Alignment Clamp VRS VARIO Coupling Concrete Finish VKS 99 VARIO Coupling VKZ 147 VARIO Coupling VKZ 211 VARIO Coupling VKZ Spec. Length VARIO Internal Edge S 75/75 x 240 VARIO Internal Edge S 75/75 x 300 VARIO Internal Edge S 75/75 x 360 VARIO Internal Edge S 75/75 x 480 VARIO Internal Edge S 75/75 x 600 VARIO Standard Panel S 100 x 240 VARIO Standard Panel S 100 x 300 VARIO Standard Panel S 100 x 360 VARIO Standard Panel S 100 x 420 VARIO Standard Panel S 100 x 480 VARIO Standard Panel S 100 x 540 VARIO Standard Panel S 100 x 600 VARIO Standard Panel S 125 x 240 VARIO Standard Panel S 125 x 300 VARIO Standard Panel S 125 x 360 VARIO Standard Panel S 125 x 420 VARIO Standard Panel S 125 x 480 VARIO Standard Panel S 125 x 540 VARIO Standard Panel S 125 x 600 VARIO Standard Panel S 187,5 x 240 VARIO Standard Panel S 187,5 x 300 VARIO Standard Panel S 187,5 x 360 VARIO Standard Panel S 187,5 x 420 VARIO Standard Panel S 187,5 x 480 VARIO Standard Panel S 187,5 x 540 VARIO Standard Panel S 187,5 x 600 VARIO Standard Panel S 250 x 240 VARIO Standard Panel S 250 x 300 VARIO Standard Panel S 250 x 360 VARIO Standard Panel S 250 x 420 VARIO Standard Panel S 250 x 480 VARIO Standard Panel S 250 x 540 VARIO Standard Panel S 250 x 600 Wedge Headpiece, compl. Wedge K, galv. Wedge KZ, galv. Welding Unit for KRZ Welding Unit for RKR Welding Unit for VSRZ Welding Unit for VSRZ/12
127
Service
022310 022320 022330 103737 102945 102825 013020 013030 013080 101471 101470 101469 101467 101465 101411 101410 101409 101408 101407 101406 101405 101255 101256 101257 101258 101259 101260 101261 101248 101249 101250 101251 101252 101253 101254 101241 101242 101243 101244 101245 101246 101247 028060 024250 024240 010400 022460 010500 010490
101241 101242 101243 101244 101245 101246 101247
314,000 375,000 480,000 586,000 635,000 742,000 791,000
VARIO Standard Panels S b = 2.50 m VARIO Standard Panel S 250 x 240 VARIO Standard Panel S 250 x 300 VARIO Standard Panel S 250 x 360 VARIO Standard Panel S 250 x 420 VARIO Standard Panel S 250 x 480 VARIO Standard Panel S 250 x 540 VARIO Standard Panel S 250 x 600 Pre-assembled panels with 21 mm plywood. With Slip Boards, Cover Board and Crane Eye 24.
.
.
2500 350
350
350
350
350
297
600
78
240
21
297
Note Panel = 2.40 m, without Cover Board and Crane Eye 24. Technical Data Permissible fresh concrete pressure 60 kN/m2. Safety Instructions Load-bearing point capacity 0.7t with a crane sling angle ≤ 15°.
540 625
1250
625
100
1184
1184
Slab Formwork
480
Shoring Systems
420
1184
1184
1184
360 1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
VARIO GT 24 Girder Wall Formwork
Service
101311
6,170
1184
5358 1184
1184
4174
1184 459
1184 459
1184
1184 459
459
1184 459
2990
1776 459
2398
Protection Board 250 As top covering for VARIO GT 24 standard panels. 248
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
459
1184
Scaffolding, Stairs, Working Platforms
3582
1184
1184
240
4766
Climbing Systems
5950
300
2500
128
21
235,000 282,000 361,000 440,000 477,000 557,000 594,000
VARIO Standard Panels S b = 1.875 m VARIO Standard Panel S 187,5 x 240 VARIO Standard Panel S 187,5 x 300 VARIO Standard Panel S 187,5 x 360 VARIO Standard Panel S 187,5 x 420 VARIO Standard Panel S 187,5 x 480 VARIO Standard Panel S 187,5 x 540 VARIO Standard Panel S 187,5 x 600 Pre-assembled panels with 21 mm plywood. With Slip Boards, Cover Board and Crane Eye 24.
.
.
1875
319,5
360
360
319,5
600
78
240
21
360
Note Panel = 2.40 m, without Cover Board and Crane Eye 24. Technical Data Permissible fresh concrete pressure 60 kN/m2. Safety Instructions Load-bearing point capacity 0.7t with a crane sling angle ≤ 15°.
Column Formwork
101248 101249 101250 101251 101252 101253 101254
625
625
100
540 625
Formwork Girders
Item no. Weight kg
Wall Formwork
VARIO GT 24 Girder Wall Formwork
Slab Formwork
1184
1184
480
Shoring Systems
420
1184
1184
1184
1184
360
Climbing Systems
1184
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
1184 459
1184 459
1184
1184 459
459
1184 459
2990
1776
2398
Protection Board 187.5 As top covering for VARIO GT 24 standard panels. 248
4,470
1875
21
129
Service
1184
1184
1184
1184
101318
459
459
1184
3582
4174
240
4766
5358
5950
300
101255 101256 101257 101258 101259 101260 101261
162,000 208,000 265,000 322,000 350,000 407,000 435,000
VARIO Standard Panels S b = 1.25 m VARIO Standard Panel S 125 x 240 VARIO Standard Panel S 125 x 300 VARIO Standard Panel S 125 x 360 VARIO Standard Panel S 125 x 420 VARIO Standard Panel S 125 x 480 VARIO Standard Panel S 125 x 540 VARIO Standard Panel S 125 x 600 Pre-assembled panels with 21 mm plywood. With Slip Boards, Cover Board and Crane Eye 24.
.
.
1248 320
297
600
77
240
21
297 180
Note Panel = 2.40 m, without Cover Board and Crane Eye 24. Technical Data Permissible fresh concrete pressure 60 kN/m2. Safety Instructions Load-bearing point capacity 0.7t with a crane sling angle ≤ 15°.
540 624
100
624
1184
1184
Slab Formwork
480
Shoring Systems
420
1184
1184
1184
360 1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
VARIO GT 24 Girder Wall Formwork
Service
1184
5358 1184
1184
1184
1184
101319
2,860
1184 459
1184 459
1184
1184 459
459
1184 459
2990
1776 459
2398
Protection Board 125 As top covering for VARIO GT 24 standard panels. 248
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
459
1184
Scaffolding, Stairs, Working Platforms
3582
4174
240
4766
Climbing Systems
5950
300
1248
130
21
137,000 168,000 213,000 258,000 281,000 326,000 349,000
VARIO Standard Panels S b = 1.00 m VARIO Standard Panel S 100 x 240 VARIO Standard Panel S 100 x 300 VARIO Standard Panel S 100 x 360 VARIO Standard Panel S 100 x 420 VARIO Standard Panel S 100 x 480 VARIO Standard Panel S 100 x 540 VARIO Standard Panel S 100 x 600 Pre-assembled panels with 21 mm plywood. With Slip Boards, Cover Board and Crane Eye 24.
.
.
998 250
297
600
77
240
21
297
Note Panel = 2.40 m, without Cover Board and Crane Eye 24. Technical Data Permissible fresh concrete pressure 60 kN/m2. Safety Instructions Load-bearing point capacity 0.7t with a crane sling angle ≤ 15°.
Column Formwork
101411 101410 101409 101408 101407 101406 101405
Formwork Girders
Item no. Weight kg
Wall Formwork
VARIO GT 24 Girder Wall Formwork
100
540
Slab Formwork
1184
1184
480
Shoring Systems
420
1184
1184
1184
1184
360
Climbing Systems
1184
Scaffolding, Stairs, Working Platforms
1184
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
459
1184 459
1184
1184 459
459
1184 459
2990
1776
2398
Protection Board 100 As top covering for VARIO GT 24 standard panels. 248
2,230
998
21
131
Service
1184
1184
1184
1184
101404
459
459
1184
3582
4174
240
4766
5358
5950
300
Formwork Girders Wall Formwork
VARIO GT 24 Girder Wall Formwork Item no. Weight kg 101471 101470 101469 101467 101465
211,000 251,000 325,000 429,000 534,000
VARIO Internal Edges S 75/75 VARIO Internal Edge S 75/75 x 240 VARIO Internal Edge S 75/75 x 300 VARIO Internal Edge S 75/75 x 360 VARIO Internal Edge S 75/75 x 480 VARIO Internal Edge S 75/75 x 600 Pre-assembled panels with 21 mm plywood. With Slip Boards, Cover Board and Crane Eye 24.
.
Note Panel = 2.40 m, without Cover Board and Crane Eye 24. Technical Data Permissible fresh concrete pressure 60 kN/m2. Safety Instructions Load-bearing point capacity 0.7t with a crane sling angle ≤ 15°.
. 750 301
78
600
750 262 76
100
240
21
Column Formwork
310
1184
Slab Formwork
480
1184
1184
Shoring Systems
360
5950
300
4,730
1184
4766
1184 459
459
459
1184
1184
2990
1776 459
2398
Protection Board IE 75/75 As top covering for VARIO GT 24 standard panels.
750
101464
400
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
459
1184
Scaffolding, Stairs, Working Platforms
3582
1184
1184
Climbing Systems
240
Service
750
132
21
19,800 25,100 30,400 38,300 40,900 51,600 61,500
Steel Waler SRZ U100 Steel Waler SRZ U-100 l = 0.95m Steel Waler SRZ U-100 l = 1.20m Steel Waler SRZ U-100 l = 1.45m Steel Waler SRZ U-100 l = 1.825m Steel Waler SRZ U-100 l = 1.95m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 2.95m Steel waler for VARIO GT 24 panels and special applications.
L 950 1200 1450 1825 1950 2450 2950 Note Special lengths and other profile sizes on request. Technical Data Wy = 82.4 cm³, ly = 412 cm4
L
Formwork Girders
010600 010030 010610 010060 010070 010050 010120
Wall Formwork
Item no. Weight kg
Column Formwork
VARIO GT 24 Girder Wall Formwork
93 205
25
40
Slab Formwork
135
20
170
53
30
X x 60 Ø6
100
60
Shoring Systems
Ø9
52
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
140
U140
Plywood, SystemIndependent Accessories
0,376
U120
End Plate SRZ For Steel waler SRZ with special lengths. 150
5 Ø9
Ø6,3
133
Service
U100
710001
60 52 60
55 52 55
50 52 50
100
.
Technical Data Wy = 82.4 cm³, ly = 412 cm4
120
Steel Waler SRZ Spec. Length Steel Waler SRZ U-100 Spec. Length Steel Waler SRZ U-120 Spec. Length Steel Waler SRZ U-140 Spec. Length Additional Row of SRZ Slots
60
22,000 28,000 33,000 0,000
6
010080 010150 010090 010350
Climbing Systems
152
Item no. Weight kg 010440 010420 010490 010500
32,100 58,800 0,000 0,000
Wall Formwork
Steel Waler VSRZ Steel Waler VSRZ-24 U-100 l = 1.20/12 Steel Waler VSRZ-24 U-100 l = 2.45/12 Welding Unit for VSRZ/12 Welding Unit for VSRZ Steel waler for VARIO GT 24 corner panels and special applications.
Note Special lengths and other profile sizes on request. Technical Data Wy = 82.4 cm³, ly = 412 cm4
93 236
236
Formwork Girders
VARIO GT 24 Girder Wall Formwork
120 1200 / 2450
010200
42,300
Internal Corner Waler IRZ 75/75 Steel waler for VARIO GT 24 corner element 75 x 75 cm. Allows easy striking.
Shoring Systems
Note Special lengths and other profiles on request. Technical Data Wy = 82.4 cm³, ly = 412 cm4 10
130
38
Ø9
300
727
Climbing Systems
100
236
301
236
024240
0,805
010180 010270 010190 010400
22,000 28,000 33,000 0,000
52
Accessories Wedge KZ, galv. Cross Waler KRZ Spec. Length Cross Waler KRZ U-100 Spec. Length Cross Waler KRZ U-120 Spec. Length Cross Waler KRZ U-140, Spec. Length Welding Unit for KRZ Steel waler for VARIO GT 24 panels for narrow lift shafts.
Note When ordering, state dimensions X and Y. Technical Data Wy = 82.4 cm³, ly = 412 cm4
236
L2
Plywood, SystemIndependent Accessories
93
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
152
715
70
93 236
L1
Service
52
38
Slab Formwork
Column Formwork
Ø9
134
52
Formwork Girders
VARIO GT 24 Girder Wall Formwork Item no. Weight kg
Wall Formwork
L 722 972 1222 1472 1722 1972 2222 2472 2722 2972 3472 3972 4472 4972 5472 5972 4972 Technical Data SRU 120 Wy = 121,4 cm³, Iy = 728 cm4 SRU 140 Wy = 172,8 cm³, Iy = 1210 cm4
Column Formwork
Steel Walers Universal SRU Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-140 l = 4.97 m Universal steel waler profile U 120 and U 140 used as waling for girder wall formwork and for diverse special applications. With adjustable spacers.
Slab Formwork
18,100 24,200 30,900 38,100 44,700 52,000 58,600 65,600 72,000 81,000 92,600 106,000 119,000 135,000 146,000 159,000 157,000
L
Shoring Systems
7 x 60
37,5 52,5
51
125
125
198,5
125
125
3 x 65
112
19
Climbing Systems
48,5
17
52
162
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Complete with 4 pc. 710252 Bolt ISO 4017 M16 x 50-8.8, galv. 4 pc. 104024 Nut ISO 7040 M16-8, galv. 4 pc. 710880 Washer DIN 434, M18, galv. Technical Data Wy = 121.4 cm³, Iy = 728 cm4 53
Extension VARIO 24 U120 For assembly on Steel Waler SRU.
120
7,610
172
65
104027
140
52
X
Scaffolding, Stairs, Working Platforms
70
120
36
M 16
236
52 162
135
Service
103868 103871 103874 103877 103886 103889 103898 103892 103929 103903 103906 103915 103918 103922 103925 103928 103943
Item no. Weight kg 024070 0,460
Hook Strap HB 24-100/120, galv. For fixing GT 24 girders to Steel Waler SRZ and SRU Profile U100 - U120.
Wall Formwork
Formwork Girders
VARIO GT 24 Girder Wall Formwork Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN. M 8x70
Column Formwork
152 (U 100)
82
162 (U 120)
024080
0,676
Hook Strap HB 24-140/160, galv. For fixing GT 24 girders to Steel Waler SRZ and SRU Profile U140 - U160.
172 (U 140)
071218 024140 710240 024090
0,000 0,033 0,050 0,005
024600
0,907
Girder Claw HB U100-U120, galv. For mounting the GT 24 edge girder on the Steel Waler SRZ and SRU Profile U100 - U120.
154
M 8x100
152 (U 100)
024630
0,742
Fix Strap U100-120, galv. For fixing the GT 24 girder in the VARIO corner.
M 8x100
152 (U 100)
113
162 (U 120)
024640
0,923
Quick Str. Hook Strap 24-100/140, galv. For fixing GT 24 girders to Steel Waler SRZ, SRU, Profile U100 - U140 outside of the girder nodes.
Safety Instructions Girders fixed in position with the Quick Strap must be specially screwed to the formlining when using crane lifting gear.
99
Plywood, SystemIndependent Accessories
152
162 (U 120)
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Accessories Hook Straps HB Screw Change HB, incl. Screws F.H. Bolt DIN 603 M8 x 70 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. Nut ISO 4032 M 8-8, galv.
90
Service
82
182 (U 160)
Climbing Systems
Shoring Systems
Slab Formwork
M 8x70
136
56
Item no. Weight kg
Wall Formwork
Note The girders can be mounted at right-angles or diagonally to the steel walers and also outside of the nodes.
Column Formwork
82
152 (U 100) 162 (U 120) 172 (U 140)
0,887 0,912
Hook Straps Uni Double HBUD Hook Strap Uni Double HBUD 20-24 Hook Strap Uni Double HBUD 24-28 For fixing two GT 24 girders or VT 20K girders to SRZ steel walers and SRU Profiles U100 - U140.
Note The girders can be mounted at right-angles or diagonally to the steel walers and also outside of the nodes.
160
Shoring Systems
min 200 min 240
max 240 max 280
104930 104096
152 (U 100) 162 (U 120) 172 (U 140)
0,008 0,010
Climbing Systems
024470 024690
Accessories Hook Straps HBU, HBUD Screw Change HBU, HBUD Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 180-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Sleeve HBU/HBUD, galv.
Scaffolding, Stairs, Working Platforms
0,000 0,050 0,060 0,060 0,013
TSS-Torx, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 80, galv. For Torx Blade TX 30. Self-drilling.
Bridge- and Tunnel Formwork
071219 104929 107185 103518 103844
60 / 80
0,006
Plywood, SystemIndependent Accessories
TX 30
110272
Slab Formwork
Hook Straps Uni HBU Hook Strap Uni HBU 20-24 Hook Strap Uni HBU 24-28 For fixing two GT 24 girders or VT 20K girders to SRZ steel walers and SRU Profiles U100 - U140.
TSS-Torx 6 x 60, ZKS, galv. For Torx Blade TX 30. Self-drilling. 60 TX 30
137
Service
0,865 0,893
min 220 max 240 min 240 max 280
104931 103845
Formwork Girders
VARIO GT 24 Girder Wall Formwork
Item no. Weight kg 024270 024260
0,023 0,027
Lag Screws DIN 571, galv. Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 80, galv.
Note Wrench size SW 13.
Column Formwork
Wall Formwork
Formwork Girders
VARIO GT 24 Girder Wall Formwork
60 / 80 SW 13
072210
1,600
Power-Screwdriver SCU 7-9 Universal power screwdriver with adjustable coupler, continuous electronic speed control and clockwise/anti-clockwise rotation.
Technical Data Voltage 230 V 50-60 Hz. Power consumption 400 W. Max. tightening moment 28 Nm.
072220 072230 072240 072140
0,400 0,425 0,110 0,005
Accessories Bit Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Depth Chuck for SCU 7-9 Bit Point TX 30
072220 072230 072240 072140
0,400 0,425 0,110 0,005
Accessories for Power-Screwdriver SCU 7-9 Bit Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Depth Chuck for SCU 7-9 Bit Point TX 30
072150
2,860
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
.
Technical Data Voltage 230 V 50-60 Hz. Power consumption 230 W. Max. tightening moment 100 Nm.
.
Plywood, SystemIndependent Accessories Service
Electric Power Wrench M 14, ASB 636 Lightweight electric power wrench for momentfree working, with clockwise/anti-clockwise rotation. With 1/2” square drive.
138
Formwork Girders
VARIO GT 24 Girder Wall Formwork Extension 1/2" l = 250 mm
0,100
Socket SW 13-1/2" l = 80 mm
Column Formwork
072170
Wall Formwork
.
072180
0,560
Slab Formwork
SW 13
Ratchet Wrench 1/2"
Climbing Systems
Couplings VKZ Coupling VKZ 99 VARIO Coupling VKZ 147 VARIO Coupling VKZ 211 VARIO Coupling VKZ Spec. Length For continuously variable tight (tension and compression) connection of SRZ and SRU steel walers or for filler plates.
L 990 1470 2110
Scaffolding, Stairs, Working Platforms
9,000 13,300 19,100 9,000
Technical Data Wy = 17.1 cm³, ly = 68.3 cm4
80
Bridge- and Tunnel Formwork
44
013010 013020 013030 013080
Shoring Systems
300
30
Technical Data Wy = 17.1 cm³, ly = 68.3 cm4
12
Offset Coupling VVKZ 3/99 For connecting extended and non-extended VARIO elements above the extension.
30
7,110
80
101395
Plywood, SystemIndependent Accessories
L
990
139
Service
Item no. Weight kg 072160 0,340
Item no. Weight kg 013140 013130 013180
11,900 13,300 9,000
Corner Couplings EKZ Corner Coupling EKZ 95/43 Corner Coupling EKZ 76/76 Corner Coupling EKZ Spec. Length For continuously variable tight (tension and compression) connection of SRZ and SRU steel walers.
429 / 765 80
Column Formwork
948 / 765
103850
24,700
Outside Corner Coupling AKZ 85/85 For providing tensile and compression-proof connections of Steel Walers SRZ and SRU on external corners.
120
44
Shoring Systems
Slab Formwork
Technical Data Wy = 17.1 cm³, Iy = 68.3 cm4
44
Wall Formwork
Formwork Girders
VARIO GT 24 Girder Wall Formwork
Articulated Couplings GKZ Articulated Coupling GKZ 60/60 Articulated Coupling GKZ 76/76 Articulated Coupling GKZ Spec. Length For continuously variable tight (tension and compression) connection of SRZ and SRU steel walers with oblique angles more than 48°.
Technical Data Wy = 17.1 cm³, ly = 68.3 cm4
640 / 790
483 / 690
80
Plywood, SystemIndependent Accessories Service
11,500 14,400 9,000
44
013220 013210 013230
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
845
845
600 / 760
140
600 / 760
Formwork Girders
VARIO GT 24 Girder Wall Formwork
Wall Formwork
VARIO Coupling Concrete Finish VKS 99 For connecting VARIO GT 24 panels. Allows compensation of up to max. 5 mm panel offsets.
80
44
Item no. Weight kg 102825 8,700
103054
11,300
Accessories VARIO Alignment Clamp VRS Articulated Coupling GKS 60/60 S For connecting VARIO GT 24 panels. Allows compensation of up to max. 5 mm panel offsets.
483
80
640
Slab Formwork
2,070
44
102945
Column Formwork
990
102945
2,070
Accessories VARIO Alignment Clamp VRS VARIO Alignment Clamp VRS In connection with Coupling VKS 99 or Articulated Coupling GKS 60/60. For compensating maximum 5 mm element offset.
Complete with 1 pc. 030370 Wingnut Pivot Plate DW 15, galv.
Climbing Systems
2,070
Scaffolding, Stairs, Working Platforms
117
102945
600
Shoring Systems
600
247
Universal Coupling UK 70 For a rigid connection of Steel waler SRU and for connecting Heavy-Duty Spindles SLS. 125
685
104031 018060
0,462 0,030
48
210
21
187,5 62,5
Bridge- and Tunnel Formwork
62,5 187,5
50
Plywood, SystemIndependent Accessories
10,800
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv.
141
Service
103737
Formwork Girders
VARIO GT 24 Girder Wall Formwork Item no. Weight kg 104031 0,462
Bolt Ø 21 x 120 For different connections. 207
Ø21
018060
0,030
018060
0,030
Accessories Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. For pins up to Ø 25 mm. Ø4
2,180
Tie Yoke SKZ For tensioning on external corners with Steel Waler SRZ, SRU, U100 - U140 and VARIO couplings.
146
024210
161
Bulkhead Tie For assembling stopend formwork with VARIO GT 24.
Ø18
Technical Data Permissible tension force 30.0 kN.
390
80
DW 15
Plywood, SystemIndependent Accessories Service
2,100
48
8
013240
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
122 Ø6
142
Formwork Girders
VARIO GT 24 Girder Wall Formwork Wedge KZ, galv. For connecting panels with VARIO Couplings or Tie Yoke SKZ.
Wall Formwork
47
Item no. Weight kg 024240 0,805
20
254
Coupling Compression Plate KDP For mounting girders to VARIO Couplings in infill areas.
Column Formwork
1,230
120
024220
12
0,331
Slab Formwork
Wedge K, galv. For Coupling Compression Plate KDP, Wedge Head Piece SRZ/SRU and Waler Connector SB-A,B,C. Ø8
35
024250
107 128
Shoring Systems
90
Climbing Systems 15
0,500 1,230
Formwork Joints Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/40 l = 3.00 m Plastic profile strip for easier striking of shafts. 2500 / 3000
34/65
22
030260 101706
Bridge- and Tunnel Formwork
20
15
2500
Scaffolding, Stairs, Working Platforms
Chamfer Strip with Flange l = 2.50 m Plastic chamfer strip.
max 20 max 40
143
Plywood, SystemIndependent Accessories
0,470
Service
031200
8
20
208
025200 025210 025220 025230 025240 025250
32,200 70,000 105,000 140,000 180,000 35,000
Quick Release Corners SSE Quick Release Corner SSE 1,0 m Quick Release Corner SSE 2,0 m Quick Release Corner SSE 3,0 m Quick Release Corner SSE 4,0 m Quick Release Corner SSE 5,0 m Quick Release Corner SSE Spec. Leng For easier striking of shaft internal formwork. We recommend removing the shaft corner immediately after concreting.
L 1000 2000 3000 4000 5000 Note Formlining size is 15 cm shorter than the dimension of the concrete. 150
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
VARIO GT 24 Girder Wall Formwork
Shoring Systems
Slab Formwork
235
L
235
028050
4,550
Girder Headpiece GT 24, galv. For connecting push-pull props and kicker braces to GT 24 girders
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 145
Girder Headpiece GT 24/A, galv. For connecting push-pull props and kicker braces to extended GT 24 girders in the area of the Extension Splice 24-2.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
145
40
170
min 52 max 100
14
Plywood, SystemIndependent Accessories Service
4,680
40 min 40
170
028070
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
14
144
Formwork Girders
VARIO GT 24 Girder Wall Formwork Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 48
100
14
24
U100
U120
Wall Formwork
Wedge Headpiece, compl. For connecting push-pull props and kicker braces to Steel Waler SRZ and SRU Profile U100 - U140.
82
Item no. Weight kg 028060 1,910
027590
2,400
Accessories Wedge K, galv. Hook Strap for SB-1, 2, galv. For fixing Brace Frame SB-1 and SB-2 to Steel Waler SRZ and SRU Profile U100 - U140.
Note Wrench size SW 22.
SW 22
M 14
152 (U 100)
Slab Formwork
0,331
Shoring Systems
150
162 (U 120) 172 (U 140)
626
Climbing Systems
Complete with 2 pc. 030190 Three Wingnut DW 15, galv. Note Permissible load: see PERI Design Tables.
Scaffolding, Stairs, Working Platforms
850
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Extension Splice 24-2 For extending GT 24 girders and VARIO GT 24 elements up to max. height of 8.00 m.
28
7,040
121
024480
145
Service
024250
Column Formwork
U140
Item no. Weight kg 070760 4,650
Crane Splice GT 24 For transporting elements by crane with the GT 24 Girder.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Use 2 pieces per transportation unit. Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity with crane sling angle ≤ 15° 0.7 t.
Ø16x65/86
635
Column Formwork
Wall Formwork
021990 021980
2,780 2,780
Crane Eyes 24 Crane Eye 24, right Crane Eye 24, left For transporting elements by crane with the GT 24 Girder. Mounted securely to the element.
30
Complete with 4 pc. 780356 Nut ISO 7042 M10-8, galv. 4 pc. 710138 Bolt ISO 4014 M10 x 110-8.8, galv. 4 pc. 710139 Washer R11 DIN 440, galv. Note Illustration shows the Crane Eye 24, left. Use 2 pieces per transportation unit. Safety Instructions Load-carrying capacity with crane sling angle ≤ 15° 0.7 t.
180
90 90
228
111238
Crane Hook 2 t / GT 24 For transporting elements by crane with the GT 24 Girder. Adjustable from 23 to 41 cm.
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. 8 pc. 710138 Bolt ISO 4014 M10 x 110-8.8, galv. 8 pc. 780356 Nut ISO 7042 M10-8, galv. Note Use 2 pieces per transportation unit. Only use with compression bar. Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity 2.0 t with crane sling angle ≤ 30° .
160
80
Plywood, SystemIndependent Accessories
19,800
M 10x110
min 230 max 410 660
Service
448
Climbing Systems
20
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
25
55
Shoring Systems
Slab Formwork
117
393
Formwork Girders
VARIO GT 24 Girder Wall Formwork
146
230
Formwork Girders
VARIO GT 24 Girder Wall Formwork Item no. Weight kg 057050 4,450
Suspension Tube Vario 53 For attaching VARIO GT 24 elements.
Complete with 2 pc. 710593 Bolt ISO 4014 M10 x 80-8,8, galv. 2 pc. 710234 Nut ISO 4032 M10-8, galv.
15
4 x 25
300
4 x 25
Column Formwork Slab Formwork
Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
35
1050
460
65
899 757
Shoring Systems
66
Ø7
600
85 180
120
Note Illustration shows the Corner Scaffold Bracket EGB 24-80 R. Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
35 1050
Bridge- and Tunnel Formwork
460
Plywood, SystemIndependent Accessories
1274
600
Corner Scaffold Brackets EGB Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, left For assembling a working scaffold to panels with GT 24 girders. With securing bolts.
85 9
14,100 14,000
72
027060 027070
Climbing Systems
Scaffold Bracket GB 80 For assembly of a working and concreting scaffold with VARIO GT 24.
Scaffolding, Stairs, Working Platforms
11,000
Accessories Tie rod B 20 spec. length Hex. Nut DW 20 SW 36/60, weld.
Ø7
147
Service
027110
Ø 60 ,3
120
2,600 0,371
15
265
265
030745 030580
M 10x80
Ø25
Wall Formwork
530 Ø11
Item no. Weight kg 112159 2,130
Handrail Post Holder VARIO For assembling a guardrail on VARIO GT 24 elements.
Complete with 1 pc. 024250 Wedge K, galv. 1 pc. 780800 Sleeve ISO 8752 8 x 20, galv. 45
70 45
Wall Formwork
402
8,51°
400
Formwork Girders
VARIO GT 24 Girder Wall Formwork
Column Formwork
115
156,000 98,800
Platforms VARIO with Hatch Platform VARIO 100/250 with Hatch Platform VARIO 100/125 with Hatch Pre-assembled working platform for VARIO GT 24 panels, with access hatch.
L 2480 1230 Technical Data Permissible load 150 kg/m2
Shoring Systems
1165
Slab Formwork
105985 102415
117
105986 102920 103203
Plywood, SystemIndependent Accessories Service
155,000 115,000 84,900
Platforms VARIO without Hatch Platform VARIO 100/250 Platform VARIO 100/187.5 Platform VARIO 100/100 Pre-assembled working platform for VARIO GT 24 panels, with access hatch.
1299
L 2480 1855 980 Complete with 1 pc. 101269 Platform Strut 246 VARIO 1 pc. 101269 Platform Strut 246 VARIO 1 pc. 072170 Socket SW 13-1/2" l = 80 mm 1 pc. 072160 Extension 1/2" l = 250 mm 1 pc. 013010 Coupling VKZ 99 Technical Data Permissible load 150 kg/m2
1165
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
L
L
148
1299
Formwork Girders
VARIO GT 24 Girder Wall Formwork Technical Data Permissible load 150 kg/m2.
Wall Formwork
End Platform VARIO Pre-assembled working platform for VARIO GT 24 stopend formwork. 2 pieces per set of stopend formwork and platform level.
1020
103992
65,600
Accessories Guardrail for End Platform VARIO External Corner Platform VARIO Pre-assembled working platform for VARIO GT 24 elements. Connecting platform with pivotmounted end handrail. For external corners from 80° to 100°.
Technical Data Permissible load 150 kg/m2 Slab Formwork
22,000
275
Climbing Systems
850
Shoring Systems
1044
103865
Column Formwork
986
Item no. Weight kg 103932 36,300
Bridge- and Tunnel Formwork
Guardrail for End Platform VARIO For assembly on VARIO end platform with wall thicknesses up to 0.50 m. With foldable VARIO Platform Handrail 80. 140
1290
Plywood, SystemIndependent Accessories
149
Service
22,000
1288
103865
Scaffolding, Stairs, Working Platforms
2125
Formwork Girders
VARIO GT 24 Girder Wall Formwork Item no. Weight kg 100813 4,980
Platform Guardrail 80 End handrail for various platforms. Pivot-mounted.
Complete with 2 pc. 102414 Bolt Ø 12 x 105 x 5 x 95-ST, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
420
Wall Formwork
810
Column Formwork
880
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
80 min 60 max 76
Shoring Systems Climbing Systems
101273 101269
7,780 11,200
Platform Struts VARIO Platform Strut 167 VARIO Platform Strut 246 VARIO For assembling VARIO platforms. 2 pieces per platform.
Scaffolding, Stairs, Working Platforms
1576 / 2368
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
1726 / 2518
150
41
Complete with 2 pc. 018050 Bolt Ø 16 x 65/86, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
65 30
Service
14
82 208
148
Connector for Platform VARIO For connecting the VARIO platforms and platform struts to GT 24 girders.
50
4,050
Slab Formwork
100541
Formwork Girders
VARIO GT 24 Girder Wall Formwork Platform Bracket VARIO VBK 90 For assembly of a working and concreting scaffold on elements with GT 24 girders. With safety pins and cotter pins.
Complete with 1 pc. 106336 Bolt Ø 20 x 120, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
Wall Formwork
Item no. Weight kg 105823 9,270
1042
Column Formwork
890
745
68
180
85
Ø6
Slab Formwork
Ø7
Platform Beams VARIO Platform Beam VARIO, left Platform Beam VARIO, right For assembling VARIO GT 24 filler platforms with bolted boarding.
Note Illustration shows the VARIO Platform Beam, left.
Bridge- and Tunnel Formwork
120
Guardrail Post HSGP As guardrail for different systems.
35
Plywood, SystemIndependent Accessories
1050 65
1300
440
3,520
Scaffolding, Stairs, Working Platforms
175
1299
034580
Shoring Systems
16,600 16,600
Climbing Systems
105480 105484
Accessories Guardrail Post HSGP
151
Service
3,520
269
034580
Item no. Weight kg 107738 24,100
Ladder 240-360 Adjustable from 2.40 m to 3.60 m.
Wall Formwork
422
Formwork Girders
VARIO GT 24 Girder Wall Formwork
N x 300 max 3710
022380 022440
23,200 20,500
Double Spindles RKR Double Spindle with Wheel RKR Double Spindle without Wheel RKR
Note When ordering, please use a copy of the respective version whilst specifying the dimensions. For the wall walers, the VARIO Extension (l= 236 mm) must always be added when determining the total length. Welded joints RKR (1 per wall waler) are to be featured separately.
55 52 55
U100
U120
U140
U160
U180
Complete with 4 pc. 710880 Washer DIN 434, M18, galv. 1 pc. 710252 Bolt ISO 4017 M16 x 50-8.8, galv. 1 pc. 710229 Nut ISO 4032 M16-8, galv. Technical Data Bearing capacity of the double spindle 102.5 kN with x = 170 mm. Bearing capacity of the roller 6.0 kN.
Bridge- and Tunnel Formwork
368
710
Plywood, SystemIndependent Accessories Service
38
52
508
152
70 52 70
180
65 52 65
160
50 52 50
60 52 60
140
.
Climbing Systems Scaffolding, Stairs, Working Platforms
Tunnel Frame Wales RKR Tunnel Frame Wale RKR U100 Tunnel Frame Wale RKR U120 Tunnel Frame Wale RKR U140 Tunnel Frame Wale RKR U 160 Tunnel Frame Wale RKR U 180 Welding Unit for RKR
120
22,000 28,000 33,000 40,000 45,000 0,000
100
022310 022320 022330 022340 022350 022460
Shoring Systems
Slab Formwork
Column Formwork
min 2360
140
Formwork Girders
VARIO GT 24 Girder Wall Formwork Item no. Weight kg 022400 12,300
Adjusting Spindle RKR, compl.. For aligning RKR culvert frame formwork. Do not use for transferring loads.
Complete with 2 pc. 725560 Bolt Ø 25 x 100 2 pc. 018060 Cotter Pin 4/1, galv.
Wall Formwork
L 520
520
19,600
Corner Spindle RKR
Complete with 10 pc. 710880 Washer DIN 434, M18, galv. 10 pc. 710225 Bolt ISO 4017 M16 x 45-8.8, galv. 10 pc. 710229 Nut ISO 4032 M16-8, galv. Technical Data Permissible load F 90.0 kN.
Plate Fl 50 x 20 x 120, ESP Climbing Systems
0,906
120
Ø17
20
Scaffolding, Stairs, Working Platforms
701991
Bridge- and Tunnel Formwork
Accessories Plate Fl 50 x 20 x 120, ESP
Plywood, SystemIndependent Accessories
0,906
153
Service
701991
150
50
493
Shoring Systems
292
022410
Slab Formwork
Column Formwork
Ø25x100
Service
154
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
RUNDFLEX Circular Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
161 161 161 161 163 163 162 162 162 159 159 159 159 159 159 157 157 157 157 157 157 160 160 160 160 158 158 158 158 158 158 156 156 156 156 156 156 160 160 160 160 163 163 163 163 162
Plywood, SystemIndependent Accessories
Adjusting Spindle 210, galv. Adjusting Spindle 500, galv. Alignment Coupler 38, galv. Alignment Coupler BFD, galv. Crane Eye 24, left Crane Eye 24, right Crane Splice GT 24 Distribution Waler Extension Splice 24-2 Inside Panel I 123 x 120 Inside Panel I 123 x 240 Inside Panel I 123 x 300 Inside Panel I 123 x 360 Inside Panel I 123 x 60 Inside Panel I 123/120 2R Inside Panel I 240 x 120 Inside Panel I 240 x 120 2R Inside Panel I 240 x 240 Inside Panel I 240 x 300 Inside Panel I 240 x 360 Inside Panel I 240 x 60 Inside Panel I 72 x 120 Inside Panel I 72 x 240 Inside Panel I 72 x 300 Inside Panel I 72 x 360 Outside Panel A 128 x 120 Outside Panel A 128 x 120 2R Outside Panel A 128 x 240 Outside Panel A 128 x 300 Outside Panel A 128 x 360 Outside Panel A 128 x 60 Outside Panel A 250 x 120 Outside Panel A 250 x 120 2R Outside Panel A 250 x 240 Outside Panel A 250 x 300 Outside Panel A 250 x 360 Outside Panel A 250 x 60 Outside Panel A 85 x 120 Outside Panel A 85 x 240 Outside Panel A 85 x 300 Outside Panel A 85 x 360 Ratchet Spanner SW 24 "Combi" Scaffold Bracket GB 80 Template for RUNDFLEX A250, I240, A128, I123 Template for RUNDFLEX A85, I72 Waler Bolt for RUNDFLEX, galv.
155
Service
021610 021620 023940 023500 021980 021990 070760 021630 024480 021930 021950 021430 021970 021910 102853 021830 102855 021850 021410 021890 021810 020830 020850 020870 020890 021920 102854 021940 021420 021960 021900 021820 102856 021840 021400 021880 021800 020820 020840 020860 020880 021790 027110 099540 098217 021640
Formwork Girders
Item no. Weight kg 021800 021820 102856 021840 021400 021880
Column Formwork
Wall Formwork
RUNDFLEX Circular Formwork 126,000 181,000 241,000 339,000 419,000 508,000
Note Element without distribution waler. Panel complete with crane eye on left and right. Technical Data Minimum radius 4.0 m. Plywood 21 mm. Permissible fresh concrete pressure 60 kN/m2.
Outside Panels A 250 Outside Panel A 250 x 60 Outside Panel A 250 x 120 Outside Panel A 250 x 120 2R Outside Panel A 250 x 240 Outside Panel A 250 x 300 Outside Panel A 250 x 360 Ready-to-use formwork panel for circular structures.
.
625
220 230 335
380 610
1250
230
380 610
.
625
230
380 610
230 220 335
620
460 25
27
25 296
1218
25
1184
27
460
Scaffolding, Stairs, Working Platforms
156
1184 460 27
2402
460 27
1184
3586
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
2994
1776 1218
27
Climbing Systems
460
296
25
50
Shoring Systems
47 442
25
Slab Formwork
2500
Note Element without distribution waler. Panel complete with crane eye on left and right. Technical Data Minimum radius 4.0 m. Plywood 21 mm. Permissible fresh concrete pressure 60 kN/m2.
Inside Panels I 240 Inside Panel I 240 x 60 Inside Panel I 240 x 120 Inside Panel I 240 x 120 2R Inside Panel I 240 x 240 Inside Panel I 240 x 300 Inside Panel I 240 x 360 Ready-to-use formwork panel for circular structures.
.
Column Formwork
. 2400 324 230 209
Shoring Systems
620
2994
1776 1218
Climbing Systems Scaffolding, Stairs, Working Platforms
25
27
25
460
27
460
Bridge- and Tunnel Formwork
1184 3586
Plywood, SystemIndependent Accessories
460 27
1184
157
Service
296
25
50
47 442
25
Slab Formwork
600
296
354
1218
1200
584 230
460
354
27
584 230
25
354
2402
600
584
1184
324 209 230
460
122,000 168,000 227,000 331,000 416,000 510,000
27
021810 021830 102855 021850 021410 021890
Formwork Girders
Item no. Weight kg
Wall Formwork
RUNDFLEX Circular Formwork
Formwork Girders
Item no. Weight kg 021900 021920 102854 021940 021420 021960
Column Formwork
Wall Formwork
RUNDFLEX Circular Formwork 71,600 98,200 127,000 200,000 248,000 298,000
Outside Panels A 128 Outside Panel A 128 x 60 Outside Panel A 128 x 120 Outside Panel A 128 x 120 2R Outside Panel A 128 x 240 Outside Panel A 128 x 300 Outside Panel A 128 x 360 Ready-to-use formwork panel for circular structures.
640
220 230 335
.
380 610
Note Element without distribution waler. Panel complete with crane eye on left and right. Technical Data Minimum radius 2.50 m. Plywood 18 mm. Permissible fresh concrete pressure 60 kN/m2.
.
640
230 220 335
620
460 25
27
25 296
1218
25
1184
27
460
Scaffolding, Stairs, Working Platforms
158
1184 460 27
2402
460 27
1184
3586
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
2994
1776 1218
27
Climbing Systems
460
296
25
50
Shoring Systems
47 442
25
Slab Formwork
1280
Inside Panels I 123 Inside Panel I 123 x 60 Inside Panel I 123 x 120 Inside Panel I 123/120 2R Inside Panel I 123 x 240 Inside Panel I 123 x 300 Inside Panel I 123 x 360 Ready-to-use formwork panel for circular structures.
.
Column Formwork
.
Note Element without distribution waler. Panel complete with crane eye on left and right. Technical Data Minimum radius 2.50 m. Plywood 18 mm. Permissible fresh concrete pressure 60 kN/m2.
1232 584
324 230 209
Shoring Systems
620
2994
1776 1218
Climbing Systems
27
Scaffolding, Stairs, Working Platforms
25
1218
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
159
Service
460 27
1184
3586
25
1184
27
460
296
25
460
27
460
296
25
50
47 442
25
Slab Formwork
616
2402
616
354
1184
324 209 230
460
73,100 97,100 126,000 190,000 239,000 283,000
27
021910 021930 102853 021950 021430 021970
Formwork Girders
Item no. Weight kg
Wall Formwork
RUNDFLEX Circular Formwork
90,400 135,000 174,000 211,000 73,400 115,000 152,000 171,000
Outside Panels A 85, Inside Panels I 72 Outside Panel A 85 x 120 Outside Panel A 85 x 240 Outside Panel A 85 x 300 Outside Panel A 85 x 360 Inside Panel I 72 x 120 Inside Panel I 72 x 240 Inside Panel I 72 x 300 Inside Panel I 72 x 360 Ready-to-use formwork panel for circular structures.
. 425
250
Technical Data Minimum radius 1.0 m. Plywood 2 x 9 mm. Permissible fresh concrete pressure 60 kN/m2.
.
425
350
25
020820 020840 020860 020880 020830 020850 020870 020890
250
1776
722
Shoring Systems
241 240 241
361
27 25
296 460
1184
27 25
160
460 27
2402
460 27
1184
3586
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
1218
Climbing Systems
25
460
361
2994
Slab Formwork
850
1184
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
RUNDFLEX Circular Formwork
Formwork Girders
RUNDFLEX Circular Formwork Alignment Coupler BFD, galv. For all panel connections for MAXIMO, TRIO and RUNDFLEX. Fillers up to 10 cm.
Technical Data Permissible tension force 20.0 kN.
61
164
max 220
Wall Formwork
Item no. Weight kg 023500 4,350
288
Column Formwork
259
6,080
Alignment Coupler 38, galv. For element connections with RUNDFLEX.
Note Compensation up to 26 cm. Technical Data Permissible tension force 20.0 kN.
Slab Formwork
023940
Shoring Systems
164
max 380
434
3,770
Adjusting Spindle 500, galv. For aligning RUNDFLEX external elements. For panel joints of external and internal elements.
Complete with 2 pc. 022230 Cotter Pin 5/1, galv. Note With self-cleaning hexagonal thread. Wrench size SW 24
Climbing Systems
021620
500
125
Ø35
Complete with 2 pc. 022230 Cotter Pin 5/1, galv. Note With self-cleaning hexagonal thread. Wrench size SW 24
Plywood, SystemIndependent Accessories
Adjusting Spindle 210, galv. For aligning RUNDFLEX internal elements and the edge profiles on external and internal elements.
250 SW 24
Ø35 min 70 max 210
161
Service
2,830
125
021610
max 460
Bridge- and Tunnel Formwork
min 220
Scaffolding, Stairs, Working Platforms
SW 24
100
Distribution Waler For transferring anchor forces on two adjacently positioned T-walers.
45
690
145
770
021640
1,260
021640
1,260
Accessories Waler Bolt for RUNDFLEX, galv. Waler Bolt for RUNDFLEX, galv. For fixing the distribution waler on the T-Waler.
Complete with 1 pc. 022230 Cotter Pin 5/1, galv. Ø 40
150
Slab Formwork
Column Formwork
590
200
Item no. Weight kg 021630 18,400
Wall Formwork
Formwork Girders
RUNDFLEX Circular Formwork
7,040
Extension Splice 24-2 For extending GT 24 girders and VARIO GT 24 elements up to max. height of 8.00 m.
Complete with 2 pc. 030190 Three Wingnut DW 15, galv. Note Permissible load: see PERI Design Tables.
121
850
070760
4,650
Crane Splice GT 24 For transporting elements by crane with the GT 24 Girder.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Use 2 pieces per transportation unit. Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity with crane sling angle ≤ 15° 0.7 t.
Ø16x65/86
635
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
626
117
Service
28
024480
Climbing Systems
Shoring Systems
Ø35
162
25
30
180
393
90 90
20
228
11,000
Scaffold Bracket GB 80 For assembly of a working and concreting scaffold with VARIO GT 24.
Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
35
1050
460
65
Shoring Systems
120
027110
M 10x110
899 757
Climbing Systems
66
Ø7
1,000
Ratchet Spanner SW 24 "Combi" For adjusting RUNDFLEX elements and Cantilevered Parapet Platform GKB.
Scaffolding, Stairs, Working Platforms
180
600
85
021790
Note Wrench size SW 24. Length approx. 500 mm.
0,000 0,000
Template for RUNDFLEX Template for RUNDFLEX A250, I240, A128, I123 Template for RUNDFLEX A85, I72 The template is used for external and internal elements.
Bridge- and Tunnel Formwork
.
099540 098217
Slab Formwork
Column Formwork
Complete with 4 pc. 780356 Nut ISO 7042 M10-8, galv. 4 pc. 710138 Bolt ISO 4014 M10 x 110-8.8, galv. 4 pc. 710139 Washer R11 DIN 440, galv. Note Illustration shows the Crane Eye 24, left. Use 2 pieces per transportation unit. Safety Instructions Load-carrying capacity with crane sling angle ≤ 15° 0.7 t.
Note Including material (formlining). Produced in accordance with project requirements.
Plywood, SystemIndependent Accessories
Crane Eyes 24 Crane Eye 24, right Crane Eye 24, left For transporting elements by crane with the GT 24 Girder. Mounted securely to the element.
.
163
Service
2,780 2,780
55
021990 021980
Formwork Girders
Item no. Weight kg
Wall Formwork
RUNDFLEX Circular Formwork
Service
164
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
GRV Circular Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
167 167 166 166 166 166 166 167 168 168 168 167 167 167 166
Plywood, SystemIndependent Accessories
Adjusting Bolt STS 260, galv. Adjusting Bolt STS 360, galv. Articulated Spindle Waler GSRV 65-90 Articulated Waler GRV 30 Articulated Waler GRV 60 Articulated Waler GRV 75 Articulated Waler GRV 90 Cotter Pin 5/1, galv. GRV Bearing Block, left GRV Bearing Block, right GRV Spindle Connector Half Round Washer HRS, galv. Hook Spanner HKS for GRV Nut ISO 4032 M24-8, galv. Pin for GRV, galv.
165
Service
021240 021250 021150 021140 021130 021120 021110 022230 021270 021280 021290 021260 021160 022250 022210
Item no. Weight kg 021140 021130 021120 021110
17,600 23,900 27,100 30,200
Wall Formwork
Formwork Girders
GRV Circular Formwork Articulated Waler GRV Articulated Waler GRV 30 Articulated Waler GRV 60 Articulated Waler GRV 75 Articulated Waler GRV 90 For tie-less forming of circular structures with closed formwork ring. Continuously adjustable to suit all radii.
L X 380 300 680 600 830 750 980 900 Technical Data Permissible compressive and tension force 300 kN.
Column Formwork
L X
Ø40
021150
49,200
Articulated Spindle Waler GSRV 65-90 For forming circular structures without ties by means of a completely closed circular formwork construction. For compensations, adjustable from 65 to 90 cm.
82
70
Technical Data Permissible compressive and tension force 300 kN.
Shoring Systems
Slab Formwork
152
Ø21
min 730
max 980
min 650
max 900
Scaffolding, Stairs, Working Platforms
022210
1,900
82
70
140
Climbing Systems
Ø40
Pin for GRB, galv. For connecting the Articulated Waler GRV and Articulated Adjustable Waler GSRV 65-90.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
200 145 Ø6
022230
166
0,033
Accessories Cotter Pin 5/1, galv.
Ø40
Formwork Girders
GRV Circular Formwork Item no. Weight kg 022230 0,033
Cotter Pin 5/1, galv. For pins Ø 25 mm to Ø 40 mm.
Wall Formwork
Ø5
Hook Spanner HKS for GRV For adjusting the Articulated Adjustable Waler GSRV 65-90.
Column Formwork
2,450
40
105
021160
385
Adjusting Bolt STS Adjusting Bolt STS 260, galv. Adjusting Bolt STS 360, galv. For adjusting Articulated Waler GRV and Articulated Adjustable Waler GSRV 65-90.
Slab Formwork
0,907 1,260
Note Wrench size SW 17.
Shoring Systems
021240 021250
18
260 / 360 SW 17
022250 021260
0,100 0,178
Accessories Nut ISO 4032 M24-8, galv. Half Round Washer HRS, galv.
022250
0,100
Nut ISO 4032 M24-8, galv.
Scaffolding, Stairs, Working Platforms
Climbing Systems
M 24
Note Wrench size SW 36. M 24
Plywood, SystemIndependent Accessories
Half Round Washer HRS, galv.
Ø26
16
58
167
Service
0,178
44
021260
Bridge- and Tunnel Formwork
SW 36
Item no. Weight kg 021270 15,000
GRV Bearing Block, left For using the Articulated Waler GRV for special applications. 70
150
210
Ø40
Wall Formwork
Formwork Girders
GRV Circular Formwork
021280
15,100
200
GRV Bearing Block, right For using the Articulated Waler GRV for special applications.
Slab Formwork
82
150
Ø40
210
Column Formwork
200
200
Shoring Systems
200
Climbing Systems
021290
GRV Spindle Connector For using the Articulated Waler GRV for special applications. 190
100
Ø21
Bridge- and Tunnel Formwork
100
168
90 190
100
Scaffolding, Stairs, Working Platforms
60 50
Ø22
Plywood, SystemIndependent Accessories Service
4,880
Service
169
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
170
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
FTF Facade Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
176 174 174 176 176 174 176 172 175 172 175 177 177 173 173 177 177 173 173 175 175 176 176 176 176 176 176 176
Plywood, SystemIndependent Accessories
Base Plate-2 for RSS Bolt Ø 20 x 102, galv. Cable 2-Strands Ø = 10 mm, l = 4.0m Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, right Crane Eye A18 Cutting Cost Scaffold Tube FTF 500 Bracket FTF Assembly Device FTF Bracket w. Spindle FTF Clamp FTF End Guardrail, compl. FTF Platform 180 x 60 FTF Spindle Guide FTF Spindle Guide w. Spindle FTF Tie plate DW 15, compl. FTF Tie unit 65, compl. FTF Waling Coupling w. RS-Adaptor FTF Waling Coupling w/o RS-Adaptor FTF Wrench SW 38/1500 Push-Pull Prop RSS II Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m
171
Service
106000 105822 105905 027070 027060 723910 026417 103981 104195 103949 104744 104018 103946 103945 104070 103942 104017 103944 104083 104803 028020 026411 026412 026413 026414 026419 026418 026415
Item no. Weight kg 103981 314,000
FTF 500 Bracket Pre-assembled bracket.
Complete with 1 pc. 104070 FTF Spindle Guide w. Spindle 2 pc. 103945 FTF Spindle Guide 2 pc. 104083 FTF Waling Coupling w/o RS-Adaptor 1 pc. 103944 FTF Waling Coupling w. RS-Adaptor 2 pc. 103949 FTF Bracket w. Spindle 1 pc. 723910 Crane Eye A18 4 pc. 017020 Standard Coupler NK 48/48, galv. Technical Data Bearing capacity: see PERI product information.
1259
103949
61,900
FTF Bracket w. Spindle Pre-assembled bracket. For the supporting of and supporting on pre-cast concete elements.
1094 973
Plywood, SystemIndependent Accessories Service
340
Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
min 1300
4972
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
FTF Facade Formwork
172
300
Formwork Girders
FTF Facade Formwork Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
186
Wall Formwork
FTF Spindle Guide w. Spindle For aligning the top prefabricated section and connecting scaffold tubes.
125
Item no. Weight kg 104070 5,670
max 235
150
Column Formwork
526
1,870
FTF Spindle Guide For connecting scaffold tubes to the Steel Walers SRZ.
Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 018060 Cotter Pin 4/1, galv. Slab Formwork
103945
125
178
Ø42
Shoring Systems
235
Climbing Systems
Complete with 3 pc. 105822 Bolt Ø 20 x 102, galv. 1 pc. 027170 Bolt Ø 16 x 42, galv. 4 pc. 018060 Cotter Pin 4/1, galv.
410
Scaffolding, Stairs, Working Platforms
Ø48,3
48
Complete with 3 pc. 105822 Bolt Ø 20 x 102, galv. 3 pc. 018060 Cotter Pin 4/1, galv.
Plywood, SystemIndependent Accessories
FTF Waling Coupling w/o RS-Adaptor For assembly of a horizontal Steel Waler SRU on the FTF Bracket 500. With connection for scaffold tube.
203
5,630
125
104083
Bridge- and Tunnel Formwork
170
Ø48,3
346
48 170
173
Service
FTF Waling Coupling w. RS-Adaptor For assembly of a horizontal Steel Waler SRU on the FTF Bracket 500. With connections for pushpull prop and scaffold tube.
203
6,280
125
103944
Item no. Weight kg 723910 0,800
Crane Eye A18
Column Formwork
Wall Formwork
111
Formwork Girders
FTF Facade Formwork
171
105822
0,236
Bolt Ø 20 x 102, galv. For different connections. 102 68 Ø8
018060
0,030
105905
11,000
Accessories Cotter Pin 4/1, galv. Cable 2-Strands Ø = 10 mm, l = 4.0m For moving completely assembled units.
Safety Instructions Load-carrying capacity 1.4 t with crang sling angle ≤ 45°.
.
Scaffolding, Stairs, Working Platforms
40 00
Climbing Systems
Shoring Systems
Slab Formwork
Ø20
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
45°
174
Formwork Girders
FTF Facade Formwork
Wall Formwork
FTF Assembly Device As assembly aid for basic assembly of FTF bracket units.
345
Item no. Weight kg 104195 8,780
2,630
FTF Wrench SW 38/1500 For setting the top adjusting bracket from the ground.
Note Wrench size SW 38, SW 36.
SW 38
Slab Formwork
104803
Column Formwork
80
1400
SW 36
Ø10
Ø18
Shoring Systems
1524
FTF Clamp As additional fixing of the precast concrete element.
Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Climbing Systems
7,180
max 400
102
Note Permissible load: see PERI Design Tables.
Ø16,5
Ø16,5
2775
175
Plywood, SystemIndependent Accessories
max 3800
Service
min 2910 Ø32
10
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Ø 70
21,900
15
028020
Bridge- and Tunnel Formwork
800
Scaffolding, Stairs, Working Platforms
263
104744
Item no. Weight kg 106000 1,820
Base Plate-2 for RSS For assembly of RSS push-pull props.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
150
026415 026417 026411 026412 026413 026414 026419 026418
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0
100
12
Ø21
L
m m m m m m
1000 2000 3000 4000 5000 6000
Slab Formwork
Column Formwork
85
Ø11
Wall Formwork
Formwork Girders
FTF Facade Formwork
L
14,100 14,000
Corner Scaffold Brackets EGB Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, left For assembling a working scaffold to panels with GT 24 girders. With securing bolts.
Note Illustration shows the Corner Scaffold Bracket EGB 24-80 R. Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
120
027060 027070
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Ø48,3x3,2
1050
460
35
Service
72
9
85
Plywood, SystemIndependent Accessories
600
Bridge- and Tunnel Formwork
1274
Ø7
176
Formwork Girders
FTF Facade Formwork
497
Wall Formwork
FTF End Guardrail, compl. As guardrail for concreting scaffold.
627
Item no. Weight kg 104018 7,490
FTF Platform 180 x 60 Plywood sheet, d = 39 mm, for constructing a working scaffold with FTF column formwork. Slab Formwork
21,200
858
600
103946
Ø6
Column Formwork
766 150
Ø9
1800
Shoring Systems
39
Complete with 1 pc. 024210 Tie Yoke SKZ 1 pc. 030190 Three Wingnut DW 15, galv.
Climbing Systems
FTF Tie unit 65, compl. For bracing FTF column formwork.
92
5,350
40
104017
595 717
Plywood, SystemIndependent Accessories
125 226 DW 15
177
Service
45
Complete with 2 pc. 105822 Bolt Ø 20 x 102, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
102
FTF Tie plate DW 15, compl. For anchoring FTF column formwork. Installed in the external SRU steel waler.
57
5,580
80
103942
Bridge- and Tunnel Formwork
84
Scaffolding, Stairs, Working Platforms
B 15
Service
178
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Slab Formwork
183 186 188 195 193 193 189 191 193 198 188 188 188 190 190 190 193 193 193 198 190 192 194 182 197 182 189 191
Climbing Systems
Spindle TR 60 x 9/43 Steel Waler SRZ U-100 l = 2.45 m Swivel Coupling DK 48/48, galv. Tension Relase Plate SB DW 26 Tension Rod with Nut 100/M 30 Tension Rod with Nut 135/M 30 Threaded Anchor Plate DW 15 Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 26 Threaded Anchor Plate DW 26 Tie Rod DW 15 l = 0.50 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 spec. length Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m Tie Rod DW 20 Spec. Length Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 Spec. Length Tie Rod DW 26 Spec. Length V-Tie Holder DW 15 V-Tie Holder DW 20 V-Tie Holder DW 26 Waler Connector SB-A, B, C Wall Scaffold Hinge SB double Wedge K, galv. Wingnut DW 15, galv. Wingnut DW 20, galv.
Scaffolding, Stairs, Working Platforms
025730 010050 017010 101621 027540 027230 030840 030860 030870 030870 030005 030480 030030 030640 030641 030700 030645 030646 030340 030340 031580 031590 031600 025760 111866 024250 030100 030990
Bridge- and Tunnel Formwork
199 195 199 199 195 196 195 187 187 198 199 181 182 197 196 189 183 184 180 180 181 181 196 197 187 185 182 192 193 188 188 190 193 198 189 183 187 194 194 189 191 191 184 199 190 192 194 187 186 185 185 188 188 188 188 188 188 188 198 182 184 190 192 195 188 188 188
Plywood, SystemIndependent Accessories
Allan Key SW 14, long Anchor Plate SB - DW 26 Anchor Positioning Plate M36, galv. Anchor Positioning Stud M 36, galv. Anchor Waler U140 l = 0.55 m Anchor Waler U140 l = 2.35 m Anchor Waler U160 l = 0.55 m Base Plate-2 for RS 1000, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M36 x 130-10.9, galv. Bolt ISO 4017 M36 x 70-8.8, galv. Bolt Ø 19 x 165, galv. Bolts SB-MAXIMO, galv. Brace Frame Adaptor SB 2 Brace Frame Adaptor SB A0, A, B Brace Frame Double Anchor DW 15 Brace Frame SB 1 Brace Frame SB 2 Brace Frame SB-A Brace Frame SB-A0 Brace Frame SB-B Brace Frame SB-C Brace Frame Wall Scaffold Hinge Climbing Cone-2 M 36/DW 26, galv. Compensation Washer 20, galv. Connector SB-1,2 - MX/TR/D Connector SB-A, B, C - MX/TR/D Counterplate DW 20, 120 x 120 x 20 Coupling Nut M 30/DW 26, galv. Cutting Cost Scaffold Tube Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 20 Cutting Cost Tie Rod DW 26 Cutting Cost Tie Rod DW 26 Double Anchor Tie Yoke DSW Guide Roller SB-A, B Heavy Duty Spindle SLS 140/240 Hex. Coupler DW 26 SW 46/150, weldable Hex. Coupler DW 26 SW 46/80, weldable Hex. Nut DW 15 SW 30/108, galv. Hex. Nut DW 20 SW 36/110 Hex. Nut DW 20 SW 36/60 Hook Strap for SB-1, 2, galv. Lag Screw DIN 571 6 x 20, galv. Leading Anchor Coupler DW 15, compl. Leading Anchor Coupler DW 20, compl. Leading Anchor Coupler DW 26, compl. Nut ISO 4032-M20-8, galv. SB-L Anchor Bracket SB-L Tension Strut, l = 740 mm Hook Strap SB-2, asymetric Scaff. Tube Steel Ø 48.3 x 3.2, l = 1.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 2.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 3.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 4.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 5.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 6.0 m Scaff. Tube Steel Ø 48.3 x 3.2, per m Scaffold Mounting Ring M36, galv. Sleeve SB-MAXIMO, galv. Crane Eye SB-2 Spacer Tube rough DR 32 l = 3.00 m Spacer Tube rough DR 42 l = 3.00 m Spacer Tube rough DR 42 l = 3.00 m Spanner SW 46, for SB Spanner SW 70, for SB Spanner SW 80, for SB
179
Service
027212 027480 029390 026460 027650 027530 109017 102018 024910 029550 029430 027690 113255 106663 106662 030060 027500 027510 025700 025690 025710 025720 106661 030940 024180 027680 025740 030830 030400 026417 030050 030800 030500 030500 027520 025750 101776 030980 030970 030090 030590 030580 027590 029440 031631 031632 031633 710334 100903 100901 116078 026411 026412 026413 026414 026419 026418 026415 029490 114107 116065 031627 031634 031634 027211 027213 027210
Shoring Systems
SB Brace Frame
Item no. Weight kg 025690 412,000
Brace Frame SB-A0 For forming single-sided walls and special applications.
Column Formwork
Wall Formwork
Complete with 1 pc. 030130 Cam Nut DW 15, galv. 1 pc. 710545 Bolt Ø 50 x 150, galv. 1 pc. 710618 Cotter Pin 8/1, galv. 2 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 025730 Spindle TR 60 x 9/43 1 pc. 700553 Adapter Note Permissible load: see PERI Design Tables. Safety Instructions Load-bearing point, capacity 1.2 t per sling with crane sling angle ≤ 15°.
150
3060
min 215 max 415
Slab Formwork
1980
1930
Formwork Girders
SB Brace Frame
3885
Shoring Systems
4060
Scaffolding, Stairs, Working Platforms
Climbing Systems
025700
Brace Frame SB-A For forming single-sided walls and special applications.
Complete with 1 pc. 030130 Cam Nut DW 15, galv. 2 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 025730 Spindle TR 60 x 9/43 1 pc. 700553 Adapter Note Permissible load: see PERI Design Tables. Safety Instructions Load-bearing point, capacity 1.2 t per sling with crane sling angle ≤ 15°.
1930 2885 3060
180
min 215 max 415
1980
Bridge- and Tunnel Formwork
150
2060
Plywood, SystemIndependent Accessories Service
324,000
Formwork Girders
SB Brace Frame Complete with 1 pc. 030130 Cam Nut DW 15, galv. 1 pc. 710545 Bolt Ø 50 x 150, galv. 1 pc. 710618 Cotter Pin 8/1, galv. 2 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 025730 Spindle TR 60 x 9/43 1 pc. 700553 Adapter Note Permissible load: see PERI Design Tables. Safety Instructions Load-bearing point, capacity 1.2 t per sling with crane sling angle ≤ 15°.
Wall Formwork
Brace Frame SB-B For forming single-sided walls and special applications.
Column Formwork
Item no. Weight kg 025710 276,000
Shoring Systems
min 215 max 415
2780
Slab Formwork
95
660
1885 2060
Brace Frame SB-C For forming single-sided walls and special applications.
Complete with 2 pc. 018060 Cotter Pin 4/1, galv. 1 pc. 715936 Bolt with Split Bolt Note Permissible load: see PERI Design Tables. Safety Instructions Load-bearing point: capacity 1.5 t with crane sling angle ≤ 15°, 2.5 t with vertical lift.
Climbing Systems
49,900
Scaffolding, Stairs, Working Platforms
025720
1190
Ø50
Bridge- and Tunnel Formwork
Ø25x180
0,368
Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall thickness. 165 125
Ø19
181
Service
027690
Plywood, SystemIndependent Accessories
578
Formwork Girders
SB Brace Frame Item no. Weight kg 113255 0,433
Bolts SB-MAXIMO, galv. For connecting MAXIMO elements with Brace Frames SB.
127
Q45
Ø19
114107
1,250
Sleeve SB-MAXIMO, galv. For connecting MAXIMO elements with Brace Frames SB. 83
9,140
Connector SB-A, B, C - MX/TR/D For connecting MAXIMO, TRIO and DOMINO elements with Brace Frames SB-A0, A, B, C.
Note 1 piece per anchor point.
027690 113255 114107
0,368 0,433 1,250
025760
1,300
120 130
Accessories Bolt Ø 19 x 165, SB-TRIO, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Waler Connector SB-A, B, C For connecting Steel Walers SRZ and SRU, Profile U100 and U120 to SB-A0, A, B, C.
95 230
0,331
024250
0,331
Accessories Wedge K, galv. Wedge K, galv. For Coupling Compression Plate KDP, Wedge Head Piece SRZ/SRU and Waler Connector SB-A,B,C. Ø8
35
024250
20
208
182
156
136
200
SRZ U 120 SRZ U 100
8
Climbing Systems
125
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Ø 54
130
025740
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
180
Formwork Girders
SB Brace Frame Item no. Weight kg 025750 28,700
Guide Roller SB-A, B For moving SB-A0, SB-A und SB-B brace frame units.
Technical Data Bearing capacity 1.2 t.
255
200
Note Wrench size SW 80. Ø59
200
285
Shoring Systems
Spindle TR 60 x 9/43 Rear compression brace for SB-A0, SB-A, SB-B.
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Complete with 2 pc. 017040 Screw-On Coupler AK 48, galv. Note Permissible load: see PERI Design Tables. Safety Instructions Load-bearing point, capacity 1.5 t per sling with crane sling angle ≤ 15°.
Plywood, SystemIndependent Accessories
1170
min 145 max 510
Brace Frame SB 1 For forming single-sided walls and special applications.
2320
136,000
min 145 max 305
027500
Climbing Systems
150
250
SW 80
1950
183
Service
29,100
310
Slab Formwork
354
025730
Column Formwork
330
510
180
Wall Formwork
104
Item no. Weight kg 027510 364,000
Brace Frame SB 2 For forming single-sided walls and special applications.
Complete with 3 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 715121 Adjusting Unit SB-2 2 pc. 710067 Hex. Nut TR 60 x 9 Note Permissible load: see PERI Design Tables.
Shoring Systems
Slab Formwork
4680
Column Formwork
Wall Formwork
Formwork Girders
SB Brace Frame
2551
116065
3,680
Crane Eye SB-2 As Crane Eye for Brace Frame SB-2.
Scaffolding, Stairs, Working Platforms
Note Permissible bearing capacity 1.0 t.
80
Ø50 105
Climbing Systems
2610
135
120
Service
2,400
Hook Strap for SB-1, 2, galv. For fixing Brace Frame SB-1 and SB-2 to Steel Waler SRZ and SRU Profile U100 - U140.
252
Note Wrench size SW 22.
SW 22
M 14
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
160
027590
M 12
152 (U 100) 162 (U 120) 172 (U 140)
184
150
Formwork Girders
SB Brace Frame Item no. Weight kg 116078 3,970
Hook Strap SB-2, asymetric For fixing Brace Frame SB-2 to Steel Waler SRZ and SRU Profile U100 - U140.
Note Wrench size 18.
Wall Formwork
SW 18 M 12
152 (U 100)
140
Column Formwork
162 (U 120)
49,600
Connector SB-1,2 - MX/TR/D For assembly of Brace Frame SB-1.2 on MAXIMO, TRIO and DOMINO elements.
Safety Instructions Load-bearing point: capacity 1.0 t with crane sling angle ≤ 15°. 240
490
Climbing Systems
650
Shoring Systems
max 1650 1770
min 1270
120
265
160
60
250
Slab Formwork
027680
21
Scaffolding, Stairs, Working Platforms
SB-L Tension Strut, l = 740 mm For Brace Frame SB-L. For forming single-sided walls.
Note Permissible load: see PERI Design Tables.
820 40
740 Ø21
Bridge- and Tunnel Formwork
5,370
40
Plywood, SystemIndependent Accessories
100901
Accessories Bolt Ø 19 x 165, galv. Hook Strap for SB-1, 2, galv. Bolts SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv.
185
Service
0,368 2,400 0,433 1,250
50
027690 027590 113255 114107
Item no. Weight kg 100903 12,000
SB-L Anchor Bracket For Brace Frame SB-L. For forming single-sided walls.
Complete with 1 pc. 105400 Bolt Ø 20 x 140, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables.
300
Wall Formwork
710334 024180 024910
0,064 0,126 0,303
010050
51,600
50
Accessories Nut ISO 4032-M20-8, galv. Compensation Washer 20, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Steel Waler SRZ U-100 l = 2,45 m Steel waler for VARIO GT 24 panels and special applications.
Note Special lengths and other profile sizes on request. Technical Data Wy = 82.4 cm³, ly = 412 cm4
L
93 170
135
205
25
20
Climbing Systems
30
40
X x 60 Ø9
100
60
Scaffolding, Stairs, Working Platforms
Ø6
52
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
152
Service
Ø20x140
365
Shoring Systems
Slab Formwork
Column Formwork
Ø21
186
53
Formwork Girders
SB Brace Frame
Formwork Girders
SB Brace Frame Complete with 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Ø21
Wall Formwork
Base Plate-2 for RS 1000, galv. For assembly of RS 1000/1400 push-pull props.
108
Item no. Weight kg 102018 4,880
290
Column Formwork
95
24,330
Heavy Duty Spindle SLS 140/240 As adjustable spindle in lattice frameworks with SRU Steel Walers and RCS Climbing Rails.
Note Permissible load: See PERI Design Tables.
max 2400
Shoring Systems
min 1400
Ø21
Ø 48,3
Ø89
1346
Slab Formwork
101776
0,303
Bolt ISO 4014 M20 x 100-8.8, galv. Climbing Systems
024910
100 M 20
710334
0,064
Scaffolding, Stairs, Working Platforms
SW 30
Nut ISO 4032-M20-8, galv.
M 20
Plywood, SystemIndependent Accessories
0,126
Compensation Washer 20, galv.
Ø 58
6
6,5
Ø20,5
187
Service
024180
Bridge- and Tunnel Formwork
SW 30
Formwork Girders
Item no. Weight kg 026415 026417 026411 026412 026413 026414 026419 026418
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Scaffold Tubes Steel Ø 48.3 x 3.2 Scaff. Tube Steel Ø 48.3 x 3.2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48.3 x 3.2, l = 1.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 2.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 3.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 4.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 5.0 m Scaff. Tube Steel Ø 48.3 x 3.2, l = 6.0 m
L
1000 2000 3000 4000 5000 6000
L Ø48,3x3,2
1,400
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
(27)
017010
SW 19
027210 027213 027211
3,300 2,300 0,760
Spanner SW for SB Spanner SW 80, for SB Spanner SW 70, for SB Spanner SW 46, for SB For different applications.
L 645 570 380
L
030030 030050 030005 030480
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
SB Brace Frame
1,440 0,000 0,720 1,440
Tie Rod DW 15 Tie Rod DW 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod DW 15 l = 0.50 m Tie Rod DW 15 l = 1.00 m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN.
DW 15
188
Formwork Girders
SB Brace Frame Item no. Weight kg 030840 0,516
Threaded Plate DW 15 For use with Tie Rod DW 15 or B 15. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
Ø 80
Ø6
Brace Frame Double Anchor DW 15 Non-weldable! Take approval into consideration!
Technical Data Permissible load 2 x 90 kN. Dependent on concrete strength and installation depth.
Slab Formwork
Hex. Nut DW 15 SW 30/108, galv. For coupling Tie Rod DW 15 and B 15.
0
45°
Note Wrench size SW 30. Technical Data Permissible load 90 kN.
Shoring Systems
0,402
230
00
030090
35
R1
235
290
DW 15
108 52
52
SW 30 DW 15
0,438
Wingnut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN.
Climbing Systems
030100
50
Scaffolding, Stairs, Working Platforms
110
34
SW 27
7,030
Double Anchor Tie Yoke DSW For anchoring with Tie Rod DW 15.
Technical Data Permissible load 2 x 90 kN. 330 230 Ø20
Ø60
027520
Bridge- and Tunnel Formwork
DW 15
189
Plywood, SystemIndependent Accessories
2,130
Service
030060
Column Formwork
Ø27
Wall Formwork
60 DW 15
Formwork Girders
SB Brace Frame Item no. Weight kg 031580 0,440
V-Tie Holder DW 15 For easy installation of DW 15 Tie Rods at 45° inclinations.
Wall Formwork
298
Column Formwork
50
DW 15
0,345
Leading Anchor Coupler DW 15, compl. For easy installation of DW 15 ties at 45° inclinations.
Slab Formwork
031631
Note Wrench size SW 70.
200 90
Shoring Systems
DW 15
SW 70
030700 030800 030640 030641
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
2,560 0,000 1,280 2,560
Tie Rods DW 20 Tie Rod DW 20 Spec. Length Cutting Cost Tie Rod DW 20 Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 150 kN.
DW 20
190
Ø 37
L
Plywood, SystemIndependent Accessories Service
Spacer Tube rough DR 32 l = 3.00 m Plastic Spacer Tube for DW 15, B 15.
Ø 32
0,967
Climbing Systems
031627
Threaded Anchor Plate DW 20 For use with Tie Rod DW 20, B 20 or Screw-On Cone-2 M24/DW 20. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
Wall Formwork
Item no. Weight kg 030860 0,801
65 DW 20 Ø6
Column Formwork
32
100
Formwork Girders
SB Brace Frame
0,685
Hex. Nut DW 20 SW 36/110 For coupling Tie Rod DW 20 and B 20.
Note Wrench size SW 36. Technical Data Permissible load 150 kN.
Slab Formwork
030590
110 53
53
DW 20
Shoring Systems
SW 36
0,371
Hex. Nut DW 20 SW 36/60 For anchoring with Tie Rod DW 20 and B 20.
Note Wrench size SW 36. Technical Data Permissible load 150 kN.
Climbing Systems
030580
60
Scaffolding, Stairs, Working Platforms
DW 20 SW 36
Bridge- and Tunnel Formwork
Note Wrench size SW 36. Technical Data Permissible load 150 kN.
DW 20
Plywood, SystemIndependent Accessories
SW 36
60
191
Service
Wingnut DW 20, galv. For anchoring with Tie Rod DW 20 and B 20.
130
0,786
Ø42
030990
Item no. Weight kg 030830 2,180
Counterplate DW 20, 120 x 120 x 20 For anchoring with Tie Rod DW 20 and B 20.
Technical Data Permissible load 150 kN.
120
Wall Formwork
Formwork Girders
SB Brace Frame
Ø26
20
Column Formwork
120
0,420
V-Tie Holder DW 20 For easy installation of DW 20 Tie Rods at 45° inclinations.
Slab Formwork
031590
298
50
Shoring Systems
DW 20
0,355
Climbing Systems
031632
Leading Anchor Coupler DW 20, compl. For easy installation of DW 20 Tie Rods at 45° inclinations.
200
Scaffolding, Stairs, Working Platforms
031634
1,250
Spacer Tube rough DR 42 l = 3,00 m Plastic Spacer Tube for DW 20, 26.
192
Ø47
L Ø 42
Bridge- and Tunnel Formwork
SW 70
DW 20
90
Plywood, SystemIndependent Accessories Service
Note Wrench size SW 70.
Item no. Weight kg 4,480 0,000 2,240 4,480
Tie Rod DW 26 Tie Rod DW 26 Spec. Length Cutting Cost Tie Rod DW 26 Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 250 kN.
Wall Formwork
030340 030500 030645 030646
Formwork Girders
SB Brace Frame
Column Formwork
DW 26
1,240
Threaded Anchor Plate DW 26 For use with Tie Rod DW 26 or Screw-On Cone M30 / DW 26. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part. Slab Formwork
030870
70 DW 26
Shoring Systems
40
120
Ø8
2,620
Coupling Nut M 30/DW 26, galv. For coupling Tension Rod and Tie Rod DW 26.
Note Wrench size SW 46. Technical Data Permissible load 250 kN.
Climbing Systems
030400
195 100
55
90
Note Wrench size SW 46 and SW 22. Technical Data Permissible load 250 kN. SW 22 SW 46
M 30 200
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
Tension Rod M30 with Nut Tension Rod with Nut 100/M 30 Tension Rod with Nut 135/M 30 For anchoring the Brace Frame SB.
Plywood, SystemIndependent Accessories
5,170 6,810
400 / 750 1000 / 1350
193
Service
027540 027230
M 30
DW 26
SW 46
Item no. Weight kg 030980 1,540
Hex. Coupler DW 26 SW 46/150, weldable For coupling Tie Rod DW 26.
Note Weldable! Wrench size SW 46. Technical Data Permissible load 250 kN.
Wall Formwork
Formwork Girders
SB Brace Frame
150 72
72
DW 26
Column Formwork
SW 46
0,800
Hex. Coupler DW 26 SW 46/80, weldable For anchoring with Tie Rod DW 26.
Slab Formwork
030970
Note Weldable! Wrench size SW 46. Technical Data Permissible load 250 kN. 80 DW 26
Shoring Systems
SW 46
031600
0,430
V-Tie Holder DW 26 For easy installation of DW 26 Tie Rods at 45° inclinations. 298
Scaffolding, Stairs, Working Platforms
50
Climbing Systems
DW 26
031633
0,365
Leading Anchor Coupler DW 26, compl. For easy installation of DW 26 Tie Rods at 45° inclinations.
Note Wrench size SW 70.
Bridge- and Tunnel Formwork
200
Plywood, SystemIndependent Accessories Service
SW 70
DW 26
90
194
Formwork Girders
SB Brace Frame Item no. Weight kg 031634 1,250
Spacer Tube rough DR 42 l = 3,00 m Plastic Spacer Tube for DW 20, 26.
10,100
Tension Relase Plate SB DW 26 For anchoring the Brace Frame SB. Allows easy release of higher tensile loads. In connection with Anchor Waler 55 or 235. Turn bolt to working position before shuttering.
Wall Formwork
Note Wrench size SW 46. Technical Data Permissible load 250 kN.
Column Formwork
101621
Ø47
Ø 42
L
210
180 47
50
16
47
169
25
50
027480
7,960
Anchor Plate SB - DW 26 For anchoring the Brace Frame SB.
Shoring Systems
63
Ø35
175
63
Slab Formwork
SW 46
Technical Data Permissible load 250 kN. 180 25
11,600
Anchor Waler U160 l = 0,55 m For anchoring the Brace Frame SB.
Technical Data Permissible load 2 x 250 kN. 160
109017
Scaffolding, Stairs, Working Platforms
63
50
Ø35
140
Climbing Systems
65
63
50
175
65
Anchor Waler U140 l = 0,55 m For anchoring the Brace Frame SB.
Plywood, SystemIndependent Accessories
9,940
Technical Data Permissible load 2 x 135 kN. 140
027650
65
350 550
60
195
Service
550
Bridge- and Tunnel Formwork
350
Item no. Weight kg 027530 39,800
Anchor Waler U140 l = 2,35 m For anchoring the Brace Frame SB.
Technical Data Permissible load 2 x 135 kN.
225
Wall Formwork
Formwork Girders
SB Brace Frame
350
350
225
2350
Column Formwork
140
60
32,000
Brace Frame Wall Scaffold Hinge For hoizontal use of PERI Brace Frames SB-A0, A, B and SB-2 as climbing brackets.
Note Permissible load: see PERI product information.
Shoring Systems
580
Slab Formwork
106661
119
304
106662 106663
4,870 13,900
106662
4,870
Brace Frame Adaptor SB A0, A, B For mounting the brace frame wall scaffold hinge to the Brace Frame SB-A0, A or B
Complete with 2 pc. 106803 Nuts ISO 7042 M24-10, galv. 2 pc. 106797 Bolt ISO 4014 M24 x 220-10.9, galv. Note Wrench size SW 36.
Bridge- and Tunnel Formwork
225
Plywood, SystemIndependent Accessories Service
Accessories Brace Frame Adaptor SB A0, A, B Brace Frame Adaptor SB 2
M 24x220 SW 36
235
Scaffolding, Stairs, Working Platforms
Climbing Systems
235
196
50
Complete with 2 pc. 106798 Bolt ISO 4014 M24 x 500-10,9, galv. 2 pc. 106803 Nuts ISO 7042 M24-10, galv. Note Wrench size SW 36.
Wall Formwork
Brace Frame Adaptor SB 2 For mounting the brace frame wall scaffold hinge to the Brace Frame SB-2.
261
Item no. Weight kg 106663 13,900
Formwork Girders
SB Brace Frame
M 24x500 SW 36 235
Column Formwork
515
Wall Scaffold Hinge SB double For hoizontal use of PERI Brace Frames SB-A0, A, B as climbing brackets.
Note Permissible load: see PERI product information. Slab Formwork
64,600
Shoring Systems
613
290
111866
Climbing Cone-2 M 36/DW 26, galv. Tie System M36. For anchoring climbing systems.
Note Permissible load see PERI product information. Wrench size SW 55.
137 SW 55
25
1,240 4,480
Plywood, SystemIndependent Accessories
030870 030340
Ø 93
M 36
DW 26
90
Bridge- and Tunnel Formwork
3,040
Accessories Threaded Anchor Plate DW 26 Tie Rod DW 26 Spec. Length
197
Service
030940
Scaffolding, Stairs, Working Platforms
390
Climbing Systems
482
Item no. Weight kg 029490 1,770
Scaffold Mounting Ring M36, galv. Tie System M36. For anchoring climbing systems.
Note Permissible load: see PERI product information.
Ø 98
Wall Formwork
Formwork Girders
SB Brace Frame
029550
1,400
030870
1,240
Accessories Bolt ISO 4014 M36 x 130-10.9, galv. Threaded Anchor Plate DW 26 For use with Tie Rod DW 26 or Screw-On Cone M30 / DW 26. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
Slab Formwork
Column Formwork
90
70 DW 26
Climbing Systems
Shoring Systems
40
120
Ø8
030340 030500
4,480 0,000
Tie Rod DW 26 Tie Rod DW 26 Spec. Length Cutting Cost Tie Rod DW 26
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 250 kN.
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
DW 26
029550
1,400
Bolt ISO 4014 M36 x 130-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 55.
Service
Plywood, SystemIndependent Accessories
130 M 36 SW 55
198
Formwork Girders
SB Brace Frame Item no. Weight kg 029430 0,930
Bolt ISO 4017 M36 x 70-8.8, galv. Bolt for anchoring of climbing systems and as advancing bolt.
Note Wrench size SW 55.
Wall Formwork
70 M 36 SW 55
0,170
Anchor Positioning Plate M36, galv. For fixing the M24 anchor system if the plywood formlining is drilled through.
Column Formwork
029390
80
Ø7 Ø36,5
029440
0,005
Accessories Lag Screw DIN 571 6 x 20, galv.
029440
0,005
Lag Screw DIN 571 6 x 20, galv.
Slab Formwork
6
Shoring Systems
60
Note Wrench size SW 10. 20
Climbing Systems
SW 10 M6
0,308
Anchor Positioning Stud M 36, galv. For fixing the M24 anchor system if the plywood formlining is not drilled through.
Note Wrench size SW 14.
Scaffolding, Stairs, Working Platforms
026460
SW 14
Ø 83
M 36 Ø7 Ø4,5
027212
0,445
Accessories Allan Key SW 14, long Nail 3 x 80
Plywood, SystemIndependent Accessories
0,445 0,005
Allan Key SW 14, long For unscrewing the Anchor Positioning Stud M24, M30 and M36. SW 14
230
199
Service
027212 710312
Bridge- and Tunnel Formwork
33
Service
200
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
RS and RSS Push-Pull Props
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
208 202 204 203 208 208 207 208 207 207 207 207 205 208 206 206 204 205 205 203 204 202 202 202 203 203 206 206
Plywood, SystemIndependent Accessories
Anchor Bolt PERI MMS 20 x 130 Base Plate for RS, compl. Base Plate-2 for RS 1000, galv. Base Plate-2 for RSS Bolt Ø 16 x 42, galv. Bolt Ø 16 x 65/86, galv. Brace Connector DRA Brace Connector HDR Brace Connector HSRA Brace Connector QR Brace Connector TRIO, galv. Brace Connector-3 RAPID, galv. Connector Kicker/Push-Pull Prop, galv. Cotter Pin 4/1, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24/A, galv. Kicker AV Kicker AV 210 Kicker AV RSS III Push-Pull Prop RS 1000, galv. Push-Pull Prop RS 1400, galv. Push-Pull Prop RS I Push-Pull Prop RS II Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III Wedge Headpiece, compl. Wedge K, galv.
201
Service
103606 028100 102018 106000 027170 018050 066082 022016 034550 037530 023660 037190 028080 018060 028050 028070 028110 108135 028120 028990 103800 028210 028220 028010 028020 028030 028060 024250
Formwork Girders
RS and RSS Push-Pull Props Item no. Weight kg 028210 12,800
Push-Pull Prop RS I Extension length L = 1.84 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Ø 48,3
Ø16,5
Ø16,5
Column Formwork
5
12
Ø16,3
max 2940
Ø57
Wall Formwork
min 1840
16,500
Push-Pull Prop RS II Extension length L = 2.56 - 4.06 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Slab Formwork
028220
Ø48,3
Ø16,5
Shoring Systems
5
12
Ø16,5 Ø16,3
max 4060
Ø57
min 2560
1,830
Climbing Systems
028100
Base Plate for RS For assembly of RS push-pull props.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 85
Ø13
90
17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Bridge- and Tunnel Formwork
min 2050
Ø16,5
Ø16,5
202
10
15
1915
Plywood, SystemIndependent Accessories Service
max 2940
Ø32
Ø 70
Scaffolding, Stairs, Working Platforms
150
028010
10
Ø21
Formwork Girders
RS and RSS Push-Pull Props Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 2910
max 3800
Wall Formwork
Item no. Weight kg 028020 21,900
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 4600
Slab Formwork
38,400
max 6000
4399
16,5
1,820
Base Plate-2 for RSS, galv. For assembly of RSS push-pull props.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
85
Ø11
Climbing Systems
106000
9
15
16,5
Ø 82,5
Ø48,3
Shoring Systems
028030
Scaffolding, Stairs, Working Platforms
Note Permissible load: see PERI Design Tables.
max 10000
Ø48,3
Bridge- and Tunnel Formwork
min 6325
Ø17
Ø21
Ø21
203
Plywood, SystemIndependent Accessories
Push-Pull Prop RS 1000, galv. Extension length L = 6.40 - 10.00 m. For aligning PERI formwork systems.
10
115,000
102
028990
100
Service
150
12
Ø21
Formwork Girders
RS and RSS Push-Pull Props Item no. Weight kg 103800 271,000
Push-Pull Prop RS 1400, galv. Extension length L = 6.40 - 14.00 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables. Chain removable by personnel on the ground.
Wall Formwork
min 6400
max 14000
6290
10 Ø48,3 Ø17 Ø21
Ø21
4,880
Base Plate-2 for RS 1000, galv. For assembly of RS 1000/1400 push-pull props.
Complete with 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Ø21
108
102018
290
028110
Scaffolding, Stairs, Working Platforms
Climbing Systems
20 x 200 = 4000
Ø48,3
Shoring Systems
Slab Formwork
Column Formwork
20 x 200 = 4000
5,180
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
95
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
max 1400
Bridge- and Tunnel Formwork
Ø16x42
Ø16,5
204
10
10
980
Plywood, SystemIndependent Accessories Service
Ø 38
Ø30
Formwork Girders
RS and RSS Push-Pull Props Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1280
Wall Formwork
Item no. Weight kg 108135 13,000
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Permissible tension force 14,9 kN under 30°. Permissible compressive force 31,6 kN under 30°. Ø25
100
Bridge- and Tunnel Formwork
200
Plywood, SystemIndependent Accessories
Connector Kicker/Push-Pull Prop, galv. For connecting push-pull props and kicker braces to Main Beam HDT.
85
2,970
12
028080
10
10
1915
Shoring Systems
min 2030
Slab Formwork
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables.
Climbing Systems
Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
Scaffolding, Stairs, Working Platforms
16,900
205
Service
028120
Column Formwork
10
10
1171
Formwork Girders
RS and RSS Push-Pull Props Item no. Weight kg 028050 4,550
Girder Headpiece GT 24, galv. For connecting push-pull props and kicker braces to GT 24 girders
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Wall Formwork
145
Column Formwork
170
40 min 40
14
4,680
Slab Formwork
028070
Girder Headpiece GT 24/A, galv. For connecting push-pull props and kicker braces to extended GT 24 girders in the area of the Extension Splice 24-2.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
145
40
Shoring Systems
170
min 52 max 100
14
Wedge Headpiece SRZ/SRU For connecting push-pull props and kicker braces to Steel Waler SRZ and SRU Profile U100 - U140.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
100
Scaffolding, Stairs, Working Platforms
U140
0,331
024250
0,331
Accessories Wedge K, galv. Wedge K, galv. For Coupling Compression Plate KDP, Wedge Head Piece SRZ/SRU and Waler Connector SB-A,B,C. Ø8
Service
Plywood, SystemIndependent Accessories
35 20
208
206
8
Bridge- and Tunnel Formwork
U120
024250
48
14
24
U100
82
1,910
Climbing Systems
028060
Formwork Girders
RS and RSS Push-Pull Props
Wall Formwork
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
185
Brace Connector TRIO, galv. For connecting push-pull props and kicker braces to MAXIMO and TRIO elements. Mounted on vertical and horizontal struts.
169
Item no. Weight kg 023660 3,310
Column Formwork
222
Brace Connector-3 RAPID, galv. For connecting push-pull props and kicker braces to the RAPID column frame.
Complete with 1 pc. 037160 Bolt Ø 20 x 205, galv. 1 pc. 027170 Bolt Ø 16 x 42, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Slab Formwork
3,010
165
DW 15
Brace Connector QUATTRO QR For connecting push-pull props and kickers to QUATTRO and LICO panels.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Climbing Systems
1,140
24
1,120
Brace Connector HSRA For connecting push-pull props and kicker braces to HANDSET elements.
93
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 122
180
60
Bridge- and Tunnel Formwork
034550
Scaffolding, Stairs, Working Platforms
155
037530
20
Shoring Systems
Ø16x42
315
Brace Connector DRA For connecting push pull props and kicker braces to DOMINO elements.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
120
Ø16x42
68
1,040
117
066082
Plywood, SystemIndependent Accessories
Ø16x42
98
207
Service
037190
Brace Connector HDR For connecting push-pull props and kicker braces to HDS and HDSS Prop Sections.
75 14
027170
0,102
Ø16x42
60
Bolt Ø 16 x 42, galv. For different connections. 60 43 Ø5
24
Column Formwork
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
171
Item no. Weight kg 022016 1,300
Wall Formwork
Formwork Girders
RS and RSS Push-Pull Props
Shoring Systems
Slab Formwork
16
018060
0,030
018050
0,171
Accessories Cotter Pin 4/1, galv. Bolt Ø 16 x 65/86, galv. For different connections. 110 85
Scaffolding, Stairs, Working Platforms
Climbing Systems
64
Ø25
Ø5
Ø16
018060
0,030
018060
0,030
Accessories Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. For pins up to Ø 25 mm.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Ø4
103606
0,330
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
SW 30 MMS 20
Service
138
208
Service
209
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
210
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Shoring Systems
Slab Formwork
Column Formwork
217 217 220 214 215 215 213 213 219 212
Climbing Systems
Tie Rod Spanner DW 15 Tie Rod Wrench 15, galv. Tie Rod Wrench 20, galv. Tie Yoke SRU Waterstop Centrepiece DW 15 Weld on Anchor DW 15 Wingnut Counterplate DW 15, galv. Wingnut DW 15, galv. Wingnut DW 20, galv. Wingnut Pivot Plate DW 15, galv.
Scaffolding, Stairs, Working Platforms
108129 031070 031050 110755 031150 031300 030110 030100 030990 030370
Bridge- and Tunnel Formwork
222 222 215 215 216 216 214 218 218 218 214 220 221 212 212 219 219 221 218 223 216 221 221 213 213 213 219 220 218 218 222 218 216 217 217 217 217 217 220 222 215 214 223 212 212 219 214 212 212 212 212 212 212 212 212 212 212 212 219 219 219 219 219 221 221 221 221
Plywood, SystemIndependent Accessories
Adapter I for Pretension Jack Adapter III for Pretension Jack Anchor Positioning Stud f. AH-DW 15, Anchor Sleeve DW 15 Articulated Spanner RCS DW 15 Bracing Shoe RCS DW 15 Cam Nut DW 15, galv. Concrete Spacer Tube FZR 22 l = 0.90 m Cone DR 22 Cone FZR 22 Counterplate DW 15, 120 x 120 x 15 Counterplate DW 20, 120 x 120 x 20 Counterplate DW 26, 120 x 120 x 20 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 20 Cutting Cost Tie Rod DW 20 Cutting Cost Tie Rod DW 26 Cutting Cost Tube FZR 22 Drill- and Pretension Device 45° Eye Nut RCS DW 15 Hex. Coupler DW 26 SW 46/150, weldable Hex. Coupler DW 26 SW 46/80, weldable Hex. Nut DW 15 SW 30/108, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, weldable Hex. Nut DW 20 SW 36/110 Hex. Nut DW 20 SW 36/60 Plug DR 22 Plug FZR 22 mm Pretension Jack for DW 15/20/26 Repoxal Glue, 1 kg Rock Anchor HB DW 15 Spacer Tube rough DR 22 l = 0.21 m Spacer Tube rough DR 22 l = 0.27 m Spacer Tube rough DR 22 l = 2.00 m Spacer Tube rough DR 28 l = 3.00 m Spacer Tube rough DR 32 l = 3.00 m Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 26 Threaded Plate DW 15 Three Wingnut DW 15, galv. Tie Load Gauge 160 kN Tie Rod B 15 l = 0.30 m Tie Rod B 15 spec. length Tie Rod B 20 spec. length Tie Rod Cylinder Yoke SW, galv. Tie Rod DW 15 l = 0,50 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.20 m Tie Rod DW 15 l = 1.50 m Tie Rod DW 15 l = 1.70 m Tie Rod DW 15 l = 2.00 m Tie Rod DW 15 l = 2.50 m Tie Rod DW 15 l = 3.00 m Tie Rod DW 15 l = 3.50 m Tie Rod DW 15 l = 6.00 m Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m Tie Rod DW 20 l = 6.00 m Tie Rod DW 20 Spec. Length Tie Rod DW 20 Spec. Length Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 l = 6.00m Tie Rod DW 26 Spec. Length
211
Service
030663 030664 026440 026280 115375 114997 030130 031260 065033 031390 030140 030830 030420 030050 030050 030800 030800 030500 031320 102390 115378 030980 030970 030090 030070 030550 030590 030580 065036 031360 030460 031550 108795 065030 065031 065027 031626 031627 030860 030870 030840 030190 110612 030150 030740 030745 022030 030005 030010 030480 030490 030170 030020 030180 030710 030720 030730 030160 030640 030641 030680 030700 030700 030645 030646 030690 030340
Wall Formwork
Tie System DW 15, 20, 26, B 15, 20
Formwork Girders Wall Formwork
Item no. Weight kg 030030 030050 030005 030010 030480 030490 030170 030020 030180 030710 030720 030730 030160
1,440 0,000 0,720 1,220 1,440 1,730 2,160 2,450 2,880 3,600 4,320 5,040 8,640
Tie Rod DW 15 Tie Rod DW 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod DW 15 l = 0.50 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.20 m Tie Rod DW 15 l = 1.50 m Tie Rod DW 15 l = 1.70 m Tie Rod DW 15 l = 2.00 m Tie Rod DW 15 l = 2.50 m Tie Rod DW 15 l = 3.00 m Tie Rod DW 15 l = 3.50 m Tie Rod DW 15 l = 6.00 m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN.
DW 15
030740 030050 030150
1,550 0,000 0,420
Tie Rods B 15 Tie Rod B 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod B 15 l = 0.30 m
030370
1,560
Wingnut Pivot Plate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15. With pivoting captive nut. Maximum angle of tilting 8°.
Technical Data Permissible load 90 kN.
Bridge- and Tunnel Formwork
117
Ø10
Plywood, SystemIndependent Accessories Service
72
212
110
Scaffolding, Stairs, Working Platforms
Note Weldable! Take official approval into consideration! Technical Data Permissible load 85 kN.
B 15
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Tie System DW 15, 20, 26 B 15, 20
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20 Wingnut Counterplate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN. 96
Wall Formwork
Item no. Weight kg 030110 0,799
50
110
SW 27
0,438
Wingnut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN.
Slab Formwork
030100
Column Formwork
DW 15
50
Shoring Systems
110
34
SW 27
DW 15
0,222
Hex. Nut DW 15 SW 30/50, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 30. Technical Data Permissible load 90 kN.
Climbing Systems
030070
50 SW 30
Hex. Nut DW 15 SW 30/50, weldable For anchoring with Tie Rod DW 15 and B 15.
Note Weldable! Wrench size SW 30. Technical Data Permissible load 90 kN.
Bridge- and Tunnel Formwork
0,233
50 SW 30
030090
0,402
Hex. Nut DW 15 SW 30/108, galv. For coupling Tie Rod DW 15 and B 15.
Plywood, SystemIndependent Accessories
DW 15
Note Wrench size SW 30. Technical Data Permissible load 90 kN. 108 52
52
SW 30 DW 15
213
Service
030550
Scaffolding, Stairs, Working Platforms
DW 15
Item no. Weight kg 030190 0,462
Three Wingnut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Wall Formwork
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20 Note Wrench size SW 27. Technical Data Permissible load 90 kN. 90
50
40
DW 15
Column Formwork
SW 27
0,318
Cam Nut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Slab Formwork
030130
Note Wrench size SW 27. Technical Data Permissible load 90 kN. 50
50
SW 27
030140
1,620
Counterplate DW 15, 120 x 120 x 15 For anchoring with Tie Rod DW 15 and B 15.
Technical Data Permissible load 90 kN. 120
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
DW 15
15
20
20
022030
2,170
Tie Yoke, galv. For anchoring with Tie Rod DW 15 and B 15.
Technical Data Permissible load 90 kN. 150
Ø 50
110755
5,140
Tie Yoke SRU Suitable for Tie Rod DW 15. Ø18
60
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Ø20
Service
250
214
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20 Item no. Weight kg 031150 0,797
Waterstop Centrepiece DW 15, raw For anchoring with Tie Rod DW 15 and B 15.
026280
1,220
Anchor Sleeve DW 15
Wall Formwork
110
Note Permissible load: see PERI Product Information. 100 68
8
120 15
Column Formwork
Ø 80
Ø 51
Ø 36
DW 15
Slab Formwork
Ø 31
Ø12
026440
0,100
Anchor Positioning Stud f. AH-DW 15, galv. For fixing the Anchor Sleeve DW 15 if the plywood formlining is not drilled through.
Shoring Systems
DW 15
Note Wrench size SW 10.
50
030840
0,516
Threaded Plate DW 15 For use with Tie Rod DW 15 or B 15. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part. 60
Ø27
DW 15
Technical Data Permissible load 90 kN. 6
180
Plywood, SystemIndependent Accessories
Weld on Anchor DW 15 For anchoring single-sided formwork.
150
1,350
60
031300
Bridge- and Tunnel Formwork
Ø 80
Ø6
Scaffolding, Stairs, Working Platforms
Ø5
DW 15
215
Service
DW 15
Climbing Systems
Ø50
SW 10
Item no. Weight kg 114997 7,160
Bracing Shoe RCS DW 15 For anchoring the bracing with DW 15 to the building slab. Fixation with anchor system M24 or corresponding dowels.
Wall Formwork
Complete with 1 pc. 104031 Bolt Ø 21 x 120 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Product Information. 230
Ø25 Ø23
78
Column Formwork
130
Ø21x120
Ø32 310
Ø26,5
125
Articulated Spanner RCS DW 15 For tensioning and as an articulated connection to the Climbing Rail RCS, Steel Waler SRU or Bracing Shoe RCS for bracing with DW 15.
110
6,100
Slab Formwork
115375
200
12
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Ø20
150 40
104031 111567 030070
0,462 0,729 0,222
115378
1,110
Climbing Systems
DW 15 107
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
Eye Nut RCS DW 15 As an articulated connection to the Climbing Rail RCS, Steel Waler SRU for bracing with DW 15. Ø26,5
104031 111567
0,462 0,729
108795
0,450
Plywood, SystemIndependent Accessories Service
Accessories Bolt Ø 21 x 120 Bolt Ø 26 x 120 Hex. Nut DW 15 SW 30/50, galv.
64
Shoring Systems
265
40
Accessories Bolt Ø 21 x 120 Bolt Ø 26 x 120 Rock Anchor HB DW 15 For subsequent anchoring with DW 15 tie rods. Diameter of drilled hole 36.5 - 38 mm.
Technical Data Permissible load 90 kN. Dependent on rock and / or concrete strength and installation depth. Safety Instructions Follow Instructions for Use at all times. 100 DW 15
216
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20 Tie Rod Wrench 15, galv. For easy handling of Tie Rod DW 15.
250
3,480
15
Tie Rod Spanner DW 15 For Wingnut Counterplate DW 15, Wingnut Pivot Plate DW 15 and Wingnut DW 15.
Column Formwork
108129
Wall Formwork
140
Item no. Weight kg 031070 1,260
74
25
Climbing Systems Scaffolding, Stairs, Working Platforms
Ø 22
0,886
Ø 26
031626
Ø28
L
Ø33
Spacer Tubes rough DR 22 Spacer Tube rough DR 22 l = 2.00 m Spacer Tube rough DR 22 l = 0.27 m Spacer Tube rough DR 22 l = 0.21 m Plastic Spacer Tube for DW 15, B 15.
Ø 37
0,359 0,050 0,039
Ø 32
065027 065031 065030
Shoring Systems
130
Slab Formwork
1096
Spacer Tube rough DR 28 l = 3.00 m Plastic Spacer Tube for DW 20, B 20.
Plywood, SystemIndependent Accessories
0,967
Spacer Tube rough DR 32 l = 3.00 m Plastic Spacer Tube for DW 26.
L
217
Service
031627
Bridge- and Tunnel Formwork
L
Item no. Weight kg 065033 0,010
Cone DR 22 Plastic. Sutable for Spacer Tube DR 22.
Note Delivery unit 500 pieces.
15 32,5
065036
0,002
Plug DR 22 Plastic. Suitable for Spacer Tube DR 22.
Note Delivery unit 1000 pieces.
Ø 22
Ø 23
17
1,500 0,000
Concrete Spacer Tube FZR Concrete Spacer Tube FZR 22 l = 0.90 m Cutting Cost Tube FZR 22 Spacer Tube made of fibre reinforced concrete for use with Tie Rod DW 15. Asbestos-free!
031390
0,005
Cone FZR 22 Suitable for FZR 22.
Bridge- and Tunnel Formwork
Ø 22
Note Delivery unit 1000 pieces.
Ø 22
Ø45
Scaffolding, Stairs, Working Platforms
Climbing Systems
L
12 36
031360
0,017
Plug FZR 22 mm Made of fibre reinforced concrete. Suitable for FZR 22.
Note Delivery unit 1000 pieces.
Service
Ø 22
Plywood, SystemIndependent Accessories
20
031550
218
1,120
Repoxal Glue, 1 kg Two-component adhesive for bonding fibre reinforced concrete plugs. Requirements: 1 kg adhesive for pprox. 330 Plugs FZR 22.
Note Delivery unit 1.0 kg
Ø 26
031260 031320
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Ø 21
Ø 46
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Item no. Weight kg 2,560 0,000 1,280 2,560 15,360
Tie Rods DW 20 Tie Rod DW 20 Spec. Length Cutting Cost Tie Rod DW 20 Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m Tie Rod DW 20 l = 6.00 m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN.
Wall Formwork
030700 030800 030640 030641 030680
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
030745 030800
2,600 0,000
Tie Rod B 20 Tie rod B 20 spec. length Cutting Cost Tie Rod DW 20
Note Weldable! Take official approval into consideration! Technical Data Permissible load 150 kN.
Shoring Systems
B 20
Slab Formwork
Column Formwork
DW 20
0,786
Wingnut DW 20, galv. For anchoring with Tie Rod DW 20 and B 20.
Note Wrench size SW 36. Technical Data Permissible load 150 kN.
Climbing Systems
030990
Scaffolding, Stairs, Working Platforms
130
0,685
Hex. Nut DW 20 SW 36/110 For coupling Tie Rod DW 20 and B 20.
Note Wrench size SW 36. Technical Data Permissible load 150 kN. 110 53
Plywood, SystemIndependent Accessories
030590
Bridge- and Tunnel Formwork
60
53
DW 20 SW 36
219
Service
SW 36
Ø42
DW 20
Item no. Weight kg 030580 0,371
Hex. Nut DW 20 SW 36/60 For anchoring with Tie Rod DW 20 and B 20.
Note Wrench size SW 36. Technical Data Permissible load 150 kN. 60 DW 20 SW 36
030830
2,180
Counterplate DW 20, 120 x 120 x 20 For anchoring with Tie Rod DW 20 and B 20.
Technical Data Permissible load 150 kN.
120
Column Formwork
Wall Formwork
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Shoring Systems
Slab Formwork
Ø26
120
030860
0,801
Threaded Anchor Plate DW 20 For use with Tie Rod DW 20, B 20 or Screw-On Cone-2 M24/DW 20. For anchoring in the concrete.
20
Note Permissible load: see PERI Product Information. Lost anchor part.
65
Tie Rod Wrench 20, galv. For easy handling of Tie Rod DW 20.
260
Plywood, SystemIndependent Accessories Service
1,780
140
031050
32
100
Ø6
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
DW 20
220
20
Item no. Weight kg 4,480 0,000 2,240 4,480 26,880
Tie Rods DW 26 Tie Rod DW 26 Spec. Length Cutting Cost Tie Rod DW 26 Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 l = 6.00m
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 250 kN.
Wall Formwork
030340 030500 030645 030646 030690
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Column Formwork
DW 26
0,800
Hex. Coupler DW 26 SW 46/80, weldable For anchoring with Tie Rod DW 26.
Note Weldable! Wrench size SW 46. Technical Data Permissible load 250 kN.
Slab Formwork
030970
80 DW 26
030980
1,540
Hex. Coupler DW 26 SW 46/150, weldable For coupling Tie Rod DW 26.
Shoring Systems
SW 46
Note Weldable! Wrench size SW 46. Technical Data Permissible load 250 kN. 150 72
Climbing Systems
72 DW 26
Bridge- and Tunnel Formwork
Technical Data Permissible load 250 kN.
Ø32
120
20
Plywood, SystemIndependent Accessories
Counterplate DW 26, 120 x 120 x 20 For anchoring with Tie Rod DW 26.
221
Service
2,140
120
030420
Scaffolding, Stairs, Working Platforms
SW 46
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20 Item no. Weight kg 030870 1,240
Threaded Anchor Plate DW 26 For use with Tie Rod DW 26 or Screw-On Cone M30 / DW 26. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
Wall Formwork
70 DW 26
Column Formwork
40
120
Ø8
60,000
Slab Formwork
030460
Pretension Jack for DW 15/20/26 For pre-tensioning tie rods, pulling out tie rods embedded in the concrete and for clean connecting surfaces at concrete joints. Complete in metal box.
Complete with 1 pc. 030663 Adapter I for Pretension Jack 1 pc. 030664 Adapter III for Pretension Jack Technical Data Maximum tension force 300 kN. Safety Instructions Follow Instructions for Use at all times.
030663
2,000
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
.
Adapter I for Pretension Jack For use with the Pretension Jack for pre-tensioning the tie rods.
030664
1,700
Adapter III for Pretension Jack For use with the Pretension Jack for pulling out embedded tie rods from the concrete.
Ø120
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
.
Service
Ø 160
222
70
Formwork Girders
Tie System DW 15, 20, 26 B 15, 20
Wall Formwork
Drill- and Pretension Device 45° For drilling and pre-tensioning DW 15 tie rods with 45° inclined tie points (for use with Brace Frame SB).
Column Formwork
120
150
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
210
Bridge- and Tunnel Formwork
355
Plywood, SystemIndependent Accessories
6,270
223
Service
102390
Tie Load Gauge 160 kN
193
Item no. Weight kg 110612 6,220
Service
224
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Tie System DK, SK, KK
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
233 232 227 227 227 230 226 226 226 226 232 232 232 232 231 231 231 231 232 233 233 227 227 228 228 228 230 230 230 229 229 228 232 232 229 229 229 234 233 233
Plywood, SystemIndependent Accessories
Concrete Cone Gauge Cone Spanner TRH DK Concrete Cone Architec. DW 15, 58/52 DK Concrete Cone DW 15 58/30 DK Concrete Cone UNI DW 15 58/52 DK Concrete Cone UNI DW 15 58/52 DK Cone DW 15/35 DK Cone DW 15/55 DK Cone DW 20/55 DK Cone DW 26/55 DK Cone Remover UNI DK Tongs for Concrete Cone 58 Glue Component A-2 Glue Component B-2 Glue for Concrete Cones-2 / 5kg Set KK Concrete Cone M24 67/52 KK Concrete Cone M30 80/52 KK Concrete Cone M36 90/52 Magnet Cone Spanner MX Ratchet Wrench 1" Ratchet Wrench 1/2" Sealing Cone MX 55 Sealing Cone TRH 55 SK Anchor Cone DW 15 SK Anchor Cone DW 20 SK Anchor Cone DW 26 SK Concrete Cone DW 20, 67/60 SK Concrete Cone DW 26, 100/60 SK Lead Cone DW 15 SK Sealing Washer DW 20 SK Sealing Washer DW 26 SK Sealing Washer UNI DW 15 SK Tongs for Concrete Cone 100 SK Tongs for Concrete Cone 67 SK Tube Seal 22 SK Tube Seal 28 SK Tube Seal 42 Socket SW 27-1/2" Socket SW 46-1" Socket Wrench SW 36, cromatized
225
Service
101995 110634 031641 031642 031643 031643 031635 031636 031637 031638 031655 031644 108958 110345 108136 031652 031653 031654 114797 029610 072180 112937 110675 031645 031646 031647 031650 031651 104643 031648 031649 031639 031657 031656 031671 031672 031677 029650 029630 031480
DK Cone DW 15/35 For fire-resistant and soundproof anchor points with DW 15. Resistant to seepage. For use with Spacer Tube rough 22.
Note Delivery unit 50 pieces.
Ø22,3
Ø 61,5
Item no. Weight kg 031635 0,034
Wall Formwork
Formwork Girders
Tie System DK, SK, KK
34
Column Formwork
21
Note Delivery unit 50 pieces.
Ø 22,3
DK Cone DW 15/55 For waterproof, fire-resistant and soundproof anchor points with Tie Rod DW 15. Used with Spacer Tube rough 22.
Ø 61,5
0,063
Slab Formwork
031636
54
Shoring Systems
23
0,055
DK Cone DW 20/55 For waterproof, fire-resistant and soundproof anchor points with Tie Rod DW 20. Used with Spacer Tube rough 28.
Ø 28,5
DK Cone DW 26/55 For waterproof, fire-resistant and soundproof anchor points with Tie Rod DW 26. Used with Spacer Tube rough 42.
55
Note Delivery unit 50 pieces.
Ø42,8
0,052
22
Ø61,5
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
031638
Plywood, SystemIndependent Accessories Service
Note Delivery unit 50 pieces.
Ø61,5
Climbing Systems
031637
22
226
55
Note For use with waterproofed concrete or architectural concrete. Install on both sides.
Wall Formwork
Sealing Cone MX 55 For use with MAXIMO. Use with Anchor MX.
Ø62
Item no. Weight kg 112937 0,183
0,172
Sealing Cone TRH 55 For use with TRIO Housing. Use with Anchor TRH. Slab Formwork
110675
Accessories Magnet Cone Spanner MX
Ø 62
0,893
Column Formwork
54
114797
Note Delivery unit 50 pieces.
Ø 52,5
Climbing Systems
DK Concrete Cone DW 15 58/30 For closing anchor points with DK Sealing Cone DW 15/35.
Ø 58,5
0,167
Shoring Systems
54
031642
30
DK Concrete Cone UNI DW 15 58/52 For closing anchor points with DK Sealing Cone DW 15/55, DW 20/55, DW 26/55 and SK Anchor Cone DW 15.
Note Delivery unit 50 pieces.
Ø 48
Scaffolding, Stairs, Working Platforms
0,265
Ø58,5
031643
Formwork Girders
Tie System DK, SK, KK
20
227
Service
32
Plywood, SystemIndependent Accessories
Note Delivery unit 50 pieces.
Ø54
DK Concrete Cone Architec. DW 15, 58/52 For closing anchor points with DK Sealing Cone DW 15/55 with corresponding architectural requirements.
Ø47
0,260
Ø47
031641
Bridge- and Tunnel Formwork
52
Item no. Weight kg 031645 0,593
SK Anchor Cone DW 15 For waterproof, fire-resistant and soundproof radiation-proof anchor points with Tie Rod DW 15. Suitable for vaults and strongrooms.
Wall Formwork
Note Wrench size SW 27. Technical Data Permissible load according to DIN 18216: 90 kN. Tie rod length = wall thickness - 2 x 55 mm DW 15
Ø 40
Ø 61,5
Formwork Girders
Tie System DK, SK, KK
SW 27
56
Column Formwork
105
1,030
Slab Formwork
031646
SK Anchor Cone DW 20 For waterproof, fire-resistant and soundproof radiation-proof anchor points with Tie Rod DW 20. Suitable for vaults and strongrooms.
Note Wrench size SW 36. Technical Data Permissible load according to DIN 18216: 150 kN. Tie rod length = wall thickness - 2 x 65 mm
Ø 46
Ø 70
DW 20
SW 36
Shoring Systems
68 127
1,920
Climbing Systems
031647
SK Anchor Cone DW 26 For waterproof, fire-resistant and soundproof radiation-proof anchor points with Tie Rod DW 26. Suitable for vaults and strongrooms.
Note Wrench size SW 46. Technical Data Permissible load according to DIN 18216: 250 kN. Tie rod length = wall thickness - 2 x 75 mm
Ø 60
Scaffolding, Stairs, Working Platforms
70 138
SK Sealing Washer UNI DW 15 For sealing DK Sealing Cones DW 15 and SK Anchor Cones DW 15 on the formwork side.
Note Delivery unit 50 pieces. Safety Instructions When using the SK Sealing Cover with SK Anchor Cone, the tie rod must be shortened by 1 mm on each side.
Ø 33
0,005
Ø62,2
031639
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
SW 46
1 11
Service
Ø 103
DW 26
228
13
Note Delivery unit 50 pieces. Safety Instructions When using the SK Sealing Cover with SK Anchor Cone, the tie rod must be shortened by 2 mm on each side.
Shoring Systems
1,7 14
SK Tube Seal 22 For spacer tube rough.
Note Delivery unit 250 pieces.
Climbing Systems
0,002
Note Delivery unit 250 pieces.
SK Tube Seal 42 For spacer tube rough.
Note Delivery unit 250 pieces.
Ø 41
0,005
22
Ø 53
031677
Bridge- and Tunnel Formwork
3
Plywood, SystemIndependent Accessories
SK Tube Seal 28 For spacer tube rough.
Ø 27
0,003
Ø 43
031672
21
Scaffolding, Stairs, Working Platforms
3
Ø 22
Ø 35
031671
3
14
229
Service
SK Sealing Washer DW 26 For sealing SK Anchor Cones DW 26 on the formwork side.
Ø105
0,014
Ø55
031649
Slab Formwork
Column Formwork
1,5
Formwork Girders
Note Delivery unit 50 pieces. Safety Instructions When using the SK Sealing Cover with SK Anchor Cone, the tie rod must be shortened by 1.5 mm on each side.
Ø 71
SK Sealing Washer DW 20 For sealing SK Anchor Cones DW 20 on the formwork side.
Ø 42
Item no. Weight kg 031648 0,008
Wall Formwork
Tie System DK, SK, KK
Item no. Weight kg 031643 0,265
DK Concrete Cone UNI 58/52 For closing anchor points with DK Sealing Cone DW 15/55, DW 20/55, DW 26/55 and SK Anchor Cone DW 15.
Note Delivery unit 50 pieces.
Ø 48
Ø58,5
52
0,401
SK Concrete Cone DW 20-67/60 For closing anchor points with SK Anchor Cone DW 20.
Note Delivery unit 50 pieces.
Ø 54
031650
Ø 67
Column Formwork
Wall Formwork
Formwork Girders
Tie System DK, SK, KK
5,000
031651
0,881
Accessories Glue for Concrete Cones-2 / 5 kg Set SK Concrete Cone DW 26-100/60 For closing anchor points with SK Anchor Cone DW 26.
Note Delivery unit 50 pieces.
0,260
SK Lead Cone DW 15 For closing tie holes with SK Anchor Cone DW 15 for radiation-proof areas.
17,5
230
Ø40,2
104643
Accessories Glue for Concrete Cones-2 / 5 kg Set
Ø44,4
5,000
15
108136
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
60
Plywood, SystemIndependent Accessories Service
Ø80
Ø100
108136
Climbing Systems
Shoring Systems
Slab Formwork
60
20
Formwork Girders
Tie System DK, SK, KK
Wall Formwork
Note Delivery unit 50 pieces.
Ø 67,3
KK Concrete Cone M 24-67/52 For closing anchor points with Climbing Cone-2 M 24/DW 15.
Ø 40,2
Item no. Weight kg 031652 0,272
23,5
0,402
KK Concrete Cone M 30-80/52 For closing anchor points with Climbing Cone-2 M30/DW 20.
Note Delivery unit 50 pieces. Slab Formwork
031653
Accessories Glue for Concrete Cones-2 / 5 kg Set
Ø 80,5
5,000
Ø 50,5
108136
Column Formwork
52
23,5
Note Delivery unit 50 pieces.
Climbing Systems
KK Concrete Cone M 36-90/52 For closing anchor points with Climbing Cone-2 M36/DW 26.
Scaffolding, Stairs, Working Platforms
0,571
23,5 52
108136
5,000
Accessories Glue for Concrete Cones-2 / 5 kg Set Glue for Concrete Cones-2 / 5 kg Set For bonding PERI concrete cones.
Bridge- and Tunnel Formwork
5,000
Note Consisting of: 6 x Component A 6 x Component B 2 x Stirring Container 3 x Stirring staff
Plywood, SystemIndependent Accessories
108136
.
231
Service
031654
Accessories Glue for Concrete Cones-2 / 5 kg Set
Ø90,5
5,000
Ø65,3
108136
Shoring Systems
52
Item no. Weight kg 108958 0,410
Glue Component A-2 For bonding PERI concrete cones.
110345
0,430
Glue Component B-2 For bonding PERI concrete cones.
114797
0,893
Magnet Cone Spanner MX For removing Sealing Cone MX 55.
95
Formwork Girders Wall Formwork Column Formwork
Tie System DK, SK, KK
0,940
DK Cone Remover UNI For removing DK Sealing Cones.
30
327
0,383
100
Cone Spanner TRH For removing Sealing Cone TRH 55.
15
112
031644 031656 031657
0,580 0,600 0,660
DK, SK Tongs for Concrete Cones DK Tongs for Concrete Cone 58 SK Tongs for Concrete Cone 67 SK Tongs for Concrete Cone 100 For DK and SK Concrete Cones DW 15, SK Concrete Cones DW 20 and KK Concrete Cones M24 or SK Concrete Cones DW 26.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
110634
296
Service
25
117
031655
Shoring Systems
Slab Formwork
560
232
Formwork Girders
Tie System DK, SK, KK
Wall Formwork
Concrete Cone Gauge Installation of concrete cones flush with the surface.
114
Item no. Weight kg 101995 1,020
200
2,460
Socket Wrench SW 36, cromatized For a diverse range of uses.
Column Formwork
031480
0,560
Ratchet Wrench 1/2"
Climbing Systems
5,300
Ratchet Wrench 1"
Scaffolding, Stairs, Working Platforms
029610
Shoring Systems
300
0,580
Socket SW 46-1"
SW 46
Plywood, SystemIndependent Accessories
029630
Bridge- and Tunnel Formwork
900
233
Service
072180
Slab Formwork
510
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Tie System DK, SK, KK Item no. Weight kg 029650 0,160
234 Socket SW 27-1/2"
SW 27
Service
235
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
236
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
ASP Box-Out Form
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 240 240 240 240 240 239 239 239 239 239 239 239 239 239 239 239 238 238 238 238
Plywood, SystemIndependent Accessories
Corner Reveal WD 20, 193.5 cm Corner Reveal WD 20, 42.7 cm Corner Reveal WD 20, 49.0 cm Corner Reveal WD 20, 70.5 cm Corner Reveal WD 24, 193.5 cm Corner Reveal WD 24, 42.7 cm Corner Reveal WD 24, 49.0 cm Corner Reveal WD 24, 70.5 cm Corner Reveal WD 25, 193.5 cm Corner Reveal WD 25, 42.7 cm Corner Reveal WD 25, 49.0 cm Corner Reveal WD 25, 70.5 cm Corner Reveal WD 30, 193.5 cm Corner Reveal WD 30, 42.7 cm Corner Reveal WD 30, 49.0 cm Corner Reveal WD 30, 70.5 cm Cutting Cost ASP Double Head Nail l = 65 mm Framing Member ASP, l = 2.50 m Framing Member ASP, l = 3.00 m Framing Member ASP, l = 3.50 m Stiffening Panel ASP 60,0 x 125,0 cm Stiffening Panel ASP 60,0 x 150,0 cm Stiffening Panel ASP 87,0 x 74,5 cm Striking Strip WD 20, 70-250/21 Striking Strip WD 20, 70/21 Striking Strip WD 24, 70-250/21 Striking Strip WD 24, 70/21 Striking Strip WD 25, 70-250/21 Striking Strip WD 25, 70/21 Striking Strip WD 30, 70-250/21 Striking Strip WD 30, 70/21 Vertical Reveal WD 20, 193.5 cm Vertical Reveal WD 24, 193.5 cm Vertical Reveal WD 25, 193.5 cm Vertical Reveal WD 30, 193.5 cm
237
Service
065103 065100 065101 065102 065109 065106 065107 065108 065115 065112 065113 065114 065121 065118 065119 065120 065130 018280 065124 065125 065126 065128 065129 065127 101856 065104 101857 065110 101859 065116 101861 065122 065105 065111 065117 065123
Formwork Girders Wall Formwork Column Formwork
ASP Box-Out Form Item no. Weight kg 065100 065101 065102 065103 065106 065107 065108 065109 065112 065113 065114 065115 065118 065119 065120 065121
3,620 4,090 5,720 15,100 3,840 4,340 6,080 15,900 3,900 4,400 6,140 16,200 4,180 4,710 6,570 17,200
Corner Reveals WD Corner Reveal WD 20, 42.7 cm Corner Reveal WD 20, 49.0 cm Corner Reveal WD 20, 70.5 cm Corner Reveal WD 20, 193.5 cm Corner Reveal WD 24, 42.7 cm Corner Reveal WD 24, 49.0 cm Corner Reveal WD 24, 70.5 cm Corner Reveal WD 24, 193.5 cm Corner Reveal WD 25, 42.7 cm Corner Reveal WD 25, 49.0 cm Corner Reveal WD 25, 70.5 cm Corner Reveal WD 25, 193.5 cm Corner Reveal WD 30, 42.7 cm Corner Reveal WD 30, 49.0 cm Corner Reveal WD 30, 70.5 cm Corner Reveal WD 30, 193.5 cm Box-outs for doors and windows.
L 427 490 705 1935 427 490 705 1935 427 490 705 1935 427 490 705 1935
B 200 200 200 200 240 240 240 240 250 250 250 250 300 300 300 300
B
065105 065111 065117 065123
14,700 15,500 15,700 16,700
Vertical Reveals WD Vertical Reveal WD 20, 193.5 cm Vertical Reveal WD 24, 193.5 cm Vertical Reveal WD 25, 193.5 cm Vertical Reveal WD 30, 193.5 cm Box-outs for doors and windows.
170
20
150
B 200 240 250 300
1935
Bridge- and Tunnel Formwork
1915
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
L 20
Service
238
B
150
Plywood, SystemIndependent Accessories
170
Formwork Girders
ASP Box-Out Form Item no. Weight kg Striking Strips WD Striking Strip WD 20, 70/21 Striking Strip WD 24, 70/21 Striking Strip WD 25, 70/21 Striking Strip WD 30, 70/21 Box-outs for doors and windows.
B 200 240 250 300
Wall Formwork
0,150 0,180 0,190 0,230
70
065104 065110 065116 065122
B
Column Formwork
21
Slab Formwork
B 200 240 250 300
Climbing Systems
B 74,5 125,0 150,0
Scaffolding, Stairs, Working Platforms
L 87,0 60,0 60,0
L Bridge- and Tunnel Formwork
Stiffening Panels ASP Stiffening Panel ASP 87,0 x 74,5 cm Stiffening Panel ASP 60,0 x 125,0 cm Stiffening Panel ASP 60,0 x 150,0 cm Box-outs for doors and windows.
Plywood, SystemIndependent Accessories
6,660 7,730 9,300
21
B
065127 065128 065129
Shoring Systems
B
239
Service
Striking Strips WD Striking Strip WD 20, 70-250/21 Striking Strip WD 24, 70-250/21 Striking Strip WD 25, 70-250/21 Striking Strip WD 30, 70-250/21 Box-outs for doors and windows.
max 250
0,629 0,755 0,787 0,944
min 70
101856 101857 101859 101861
Item no. Weight kg 065124 065125 065126
13,700 16,400 19,100
Framing Member ASP Framing Member ASP, l = 2.50 m Framing Member ASP, l = 3.00 m Framing Member ASP, l = 3.50 m Box-outs for doors and windows.
L 2500 3000 3500
Wall Formwork
Formwork Girders
ASP Box-Out Form
Shoring Systems
Slab Formwork
149
Column Formwork
L
150
065130
0,000
Cutting Cost ASP For special lengths of striking fillets, vertical soffits etc.
018280
1,000
Double Head Nail l = 65 mm
Note Delivery unit: carton with 1000 pieces. 75 65
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø3,1
240
Service
241
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
242
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
RAPID Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
251 251 245 246 245 244 244 244 247 246 248 246 248 247 247 250 250 251 248 248 249 249 249 249 249 250 250 245 245
Plywood, SystemIndependent Accessories
Anchor Bolt PERI MMS 20 x 130 Base Plate-2 for RSS Bolt Ø 20 x 205, galv. Brace Connector-3 RAPID, galv. Chamfer Strip RAPID l = 3,0 m Column Frame 210, Alu Column Frame 300, Alu Column Frame 60, Alu Concreting Landing Concreting Platform, compl. Crane Hook Concreting Platform Crane Lifting Unit-2 RAPID End Ladder 180/2, galv. Guardrail Landing 134, galv. Guardrail Landing 52, galv. Kicker AV Kicker AV 210 Kicker AV RSS III Ladder 180/6, galv. Ladder Base, galv. Ladder Connector RAPID Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III Spherical Nut DW 15, galv. Tie Yoke DW 15
243
Service
103606 106000 037160 037190 037210 037260 037250 037270 037410 037400 037440 037320 103724 037430 037420 028110 108135 028120 051410 051460 103369 103718 051450 104132 028010 028020 028030 030440 037150
Item no. Weight kg 037250 61,400
Column Frame RAPID 300, Alu Column frames for continuously adjustable crosssections up to 60 x 60. 21 mm plywood thickness. With clamping profile for fixing the plywood without screws or nails.
Complete with 4 pc. 037160 Bolt Ø 20 x 205, galv. 4 pc. 037150 Tie Yoke DW 15 4 pc. 030440 Spherical Nut DW 15, galv. 2 pc. 780357 Bolt ISO 4017 M20 x 50-8.8, galv. 2 pc. 710334 Nut ISO 4032-M20-8, galv. 800
250
Wall Formwork
64
500
238 60
M 20x50 654
80
120
Column Formwork
1000
500
3000
Formwork Girders
RAPID Column Formwork
250 794
037260
44,800
Column Frame RAPID 210, Alu Column frames for continuously adjustable crosssections up to 60 x 60. 21 mm plywood thickness. With clamping profile for fixing the plywood without screws or nails.
Complete with 3 pc. 037160 Bolt Ø 20 x 205, galv. 3 pc. 037150 Tie Yoke DW 15 3 pc. 030440 Spherical Nut DW 15, galv. 2 pc. 780357 Bolt ISO 4017 M20 x 50-8.8, galv. 2 pc. 710334 Nut ISO 4032-M20-8, galv.
800 250 794
Service
Column Frame RAPID 60, Alu Column frames for continuously adjustable crosssections up to 60 x 60. 21 mm plywood thickness. With clamping profile for fixing the plywood without screws or nails.
Complete with 1 pc. 037160 Bolt Ø 20 x 205, galv. 1 pc. 037150 Tie Yoke DW 15 1 pc. 030440 Spherical Nut DW 15, galv. 2 pc. 780357 Bolt ISO 4017 M20 x 50-8.8, galv. 2 pc. 710334 Nut ISO 4032-M20-8, galv.
300
300
16,700
794
244
600
037270
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
2100
800
250
Climbing Systems
Shoring Systems
Slab Formwork
1000
Ø21
Item no. Weight kg 037150 0,641
Tie Yoke DW 15 For corner bracing of the RAPID column frames.
Technical Data Permissible load 90 kN according to DIN 18216.
Formwork Girders
RAPID Column Formwork
Bolt Ø 20 x 205, galv. For corner bracing of the RAPID column frames.
Complete with 1 pc. 018060 Cotter Pin 4/1, galv.
125
Column Formwork
0,736
205
037160
Ø21
28
DW 15
Wall Formwork
42
315
Slab Formwork
Ø20
Spherical Nut DW 15, galv. For corner bracing of RAPID with DW 15.
Shoring Systems
0,583
Note Spanner size SW 27. Technical Data Permissible load 90 kN. SW27
Climbing Systems
030440
Accessories Cotter Pin 4/1, galv.
68
Scaffolding, Stairs, Working Platforms
Chamfer Strip RAPID l = 3,0 m For installing the plywood formlining on the RAPID column frame. 3000
Bridge- and Tunnel Formwork
34
Plywood, SystemIndependent Accessories
0,320
25
037210
245
Service
0,030
110
018060
Item no. Weight kg 037190 3,010
Brace Connector-3 RAPID, galv. For connecting push-pull props and kicker braces to the RAPID column frame.
Complete with 1 pc. 037160 Bolt Ø 20 x 205, galv. 1 pc. 027170 Bolt Ø 16 x 42, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
Wall Formwork
Formwork Girders
RAPID Column Formwork
165
DW 15
Ø16x42
20
Column Formwork
315
037320
16,200
Crane Lifting Unit-2 RAPID For moving RAPID coulmn formwork.
Safety Instructions Load-bearing point: capacity 0.5 t.
Slab Formwork
500 Ø22
Ø18
250
Shoring Systems
798
123,000
Concreting Platform, compl. Working and concreting platform for TRIO, RAPID and QUATTRO Column Formwork.
Complete with 1 pc. 037410 Concreting Landing 2 pc. 037420 Guardrail Landing 52, galv. 2 pc. 037430 Guardrail Landing 134, galv. 3 pc. 037440 Crane Hook Concreting Platform
Bridge- and Tunnel Formwork
1521
Scaffolding, Stairs, Working Platforms
Climbing Systems
037400
Service
Plywood, SystemIndependent Accessories
1521
246
Formwork Girders
RAPID Column Formwork Concreting Landing, Alu Continuously adjusts to all column cross-sections up to max. 60 x 60 cm. Attachment is carried out using the crane eye of the concreting platform.
Technical Data Permissible load 150 kg/m2.
Wall Formwork
Item no. Weight kg 037410 51,400
1524 130
1524
Column Formwork
840
1420
Ø21
620
Ø14
Climbing Systems Bridge- and Tunnel Formwork
1305 50
Plywood, SystemIndependent Accessories
1340
Scaffolding, Stairs, Working Platforms
Guardrail Landing 134, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1005
17,100
150
037430
50
247
Service
150 525
Shoring Systems
Guardrail Landing 52, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1005
10,200
1305
037420
Slab Formwork
710
Formwork Girders
RAPID Column Formwork Item no. Weight kg 037440 5,700
Crane Hook Concreting Platform For assembling the concreting landing on the RAPID and QUATTRO column frames.
Safety Instructions Load-bearing point: capacity 1.0 t.
120
508
Wall Formwork
137
DW 15
250
Column Formwork
70
11,700
Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Slab Formwork
051410
5 x 298 = 1490
83
Shoring Systems
1960
2,180
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210
Climbing Systems
051460
103724
End Ladder 180/2, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
298
1200 1885
Plywood, SystemIndependent Accessories Service
10,400
50
450
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
405
248
Formwork Girders
RAPID Column Formwork Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Wrench size SW 18.
Wall Formwork
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
330
Item no. Weight kg 103718 0,684
Column Formwork
SW 18
Shoring Systems
230
178
195
50
Slab Formwork
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90
469 661
15,600 25,200
Ladder Safety Cages Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Climbing Systems
104132 051450
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
Note Permissible load: see PERI Design Tables.
min 2050
max 2940
Ø32
Ø16,5
Ø16,5
1915
10
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Ø 70
17,800
15
028010
704
750 / 1500
710
249
Plywood, SystemIndependent Accessories
Ladder Connector RAPID, galv. For connecting ladders to RAPID column frames.
Service
6,400
260
103369
Formwork Girders
RAPID Column Formwork Item no. Weight kg 028020 21,900
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Wall Formwork
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
38,400
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Slab Formwork
028030
min 4600
4399
16,5
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
9
15
Shoring Systems
5,180
Climbing Systems
028110
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
max 1400
Ø 38
Scaffolding, Stairs, Working Platforms
Ø30
Ø16x42
Ø16,5
10
10
980
108135
13,000
Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables.
Plywood, SystemIndependent Accessories
min 1280
max 2100
Ø36
Ø 70
Ø16x42
Ø16,5
10
1171
250
10
Bridge- and Tunnel Formwork
Ø 82,5
Ø48,3
16,5
Service
max 6000
Formwork Girders
RAPID Column Formwork Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 2030
Wall Formwork
Item no. Weight kg 028120 16,900
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
85
Ø11
Climbing Systems
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
SW 30 MMS 20 138
Scaffolding, Stairs, Working Platforms
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
Bridge- and Tunnel Formwork
0,330
Plywood, SystemIndependent Accessories
103606
100
12
Ø21 150
Column Formwork Slab Formwork
Base Plate-2 for RSS, galv. For assembly of RSS push-pull props.
Shoring Systems
1,820
251
Service
106000
10
10
1915
Service
252
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
QUATTRO Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
255 261 256 256 256 255 255 255 255 257 257 256 258 259 256 258 258 261 261 261 258 259 259 259 260 260 260 260 260 255 254 254 255 257
Plywood, SystemIndependent Accessories
Base Plate QUATTRO QB Base Plate-2 for RSS Bolt Ø 20 x 140, galv. Bolt Ø 20 x 42, galv. Brace Connector QR Chamfer Strip QDL 125 Chamfer Strip QDL 275 Chamfer Strip QDL 350 Chamfer Strip QDL 50 Concreting Landing Concreting Platform, compl. Cotter Pin 4/1, galv. Crane Hook Concreting Platform End Ladder 180/2, galv. Frame Spanner QUATTRO QA Guardrail Landing 134, galv. Guardrail Landing 52, galv. Kicker AV Kicker AV 210 Kicker AV RSS III Ladder 180/6, galv. Ladder Base, galv. Ladder Connector QUATTRO Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III QUATTRO Frame QES 125 QUATTRO Frame QES 275 QUATTRO Frame QES 350 QUATTRO Frame QES 50 Transportation Wheel QUATTRO
253
Service
037550 106000 105400 724500 037530 037600 037610 105448 037590 037410 037400 018060 037440 103724 037540 037430 037420 028110 108135 028120 051410 051460 103391 103718 051450 104132 028010 028020 028030 109924 109925 109926 109923 105791
Item no. Weight kg 109926 206,000
QUATTRO Frame QES 350 Column panel with 20 mm plywood, screwed on from the rear. For cross-sections in 5 cm increments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with 2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv. 2 pc. 710045 Nut DIN 557-4 M20, galv. 13 pc. 105400 Bolt Ø 20 x 140, galv. 13 pc. 018060 Cotter Pin 4/1, galv. 1 pc. 037550 Base Plate QUATTRO QB Safety Instructions Load-bearing point capacity 1.0 t.
Column Formwork
Wall Formwork
Formwork Girders
QUATTRO Column Formwork
Shoring Systems
693
Slab Formwork
3500
835
725
158,000
QUATTRO Frame QES 275 Column panel with 20 mm plywood, screwed on from the rear. For cross-sections in 5 cm increments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
Complete with 2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv. 2 pc. 710045 Nut DIN 557-4 M20, galv. 9 pc. 105400 Bolt Ø 20 x 140, galv. 9 pc. 018060 Cotter Pin 4/1, galv. 1 pc. 037550 Base Plate QUATTRO QB Safety Instructions Load-bearing point capacity 1.0 t.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
2750
Scaffolding, Stairs, Working Platforms
Climbing Systems
109925
Service
725
725
254
Column Formwork
Complete with 2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv. 2 pc. 710045 Nut DIN 557-4 M20, galv. 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv. Safety Instructions Load-bearing point capacity 1.0 t.
L 3500 2750 1250 500
Scaffolding, Stairs, Working Platforms
Chamfer Strips QDL Chamfer Strip QDL 350 Chamfer Strip QDL 275 Chamfer Strip QDL 125 Chamfer Strip QDL 50 Plastic chamfer strip with nailing panel. Edge length 15 x 15 mm.
L
Bridge- and Tunnel Formwork
0,665 0,520 0,230 0,100
20 15
105448 037610 037600 037590
Climbing Systems
725
2,7
Complete with 2 pc. 030130 Cam Nut DW 15, galv.
530 DW 15
100
Base Plate QUATTRO QB For protecting the plywood formlining against damage.
3°
3,240
Plywood, SystemIndependent Accessories
15
037550
Slab Formwork
QUATTRO Frame QES 50 Column panel with 20 mm plywood, screwed on from the rear. For cross-sections in 5 cm increments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
500
32,300
Shoring Systems
725
109923
Formwork Girders
Complete with 2 pc. 724812 Stair Tower Eye Bolt M20 x 110, galv. 2 pc. 710045 Nut DIN 557-4 M20, galv. 5 pc. 105400 Bolt Ø 20 x 140, galv. 5 pc. 018060 Cotter Pin 4/1, galv. Safety Instructions Load-bearing point capacity 1.0 t.
725
80
255
Service
QUATTRO Frame QES 125 Column panel with 20 mm plywood, screwed on from the rear. For cross-sections in 5 cm increments from 20 x 20 cm to 60 x 60 cm. Eye bolt as load-bearing point and for extensions. Without chamfer strip.
1250
Item no. Weight kg 109924 73,800
Wall Formwork
QUATTRO Column Formwork
Item no. Weight kg 037540 2,370
Frame Spanner QUATTRO QA For bracing QUATTRO column elements. Only required on a column corner.
Note Required no. of pieces: h = 3.50 m 6 pieces, h = 2.75 m 4 pieces h = 1.25 m 2 pieces, h = 0.50 m 1 piece 45
Wall Formwork
Ø21
DW 15
Column Formwork
57
249
89
Formwork Girders
QUATTRO Column Formwork
195
1,140
Brace Connector QR For connecting push-pull props and kickers to QUATTRO and LICO panels.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
155
Slab Formwork
037530
724500
0,098
Bolt Ø 20 x 42, galv. For different connections. 42
018060
0,030
105400
0,330
Accessories Cotter Pin 4/1, galv. Bolt Ø 20 x 140, galv. For different connections.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø5
Service
93
20
Shoring Systems
24
140 89 Ø8
Ø20
018060
0,030
018060
0,030
Accessories Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. For pins up to Ø 25 mm. Ø4
256
Formwork Girders
QUATTRO Column Formwork Technical Data Bearing capacity 500 kg.
Wall Formwork
Transportation Wheel QUATTRO For moving completely assembled QUATTRO column formwork. Always use 4 pieces per column.
464
Concreting Platform, compl. Working and concreting platform for TRIO -, RAPID and QUATTRO Column Formwork.
Complete with 1 pc. 037410 Concreting Landing 2 pc. 037420 Guardrail Landing 52, galv. 2 pc. 037430 Guardrail Landing 134, galv. 3 pc. 037440 Crane Hook Concreting Platform
Slab Formwork
123,000
135
Shoring Systems
1521
037400
Column Formwork
642
Item no. Weight kg 105791 16,900
Scaffolding, Stairs, Working Platforms
Technical Data Permissible load 150 kg/m2.
1524
Bridge- and Tunnel Formwork
130
Ø21 Ø14
Plywood, SystemIndependent Accessories
710
257
Service
1420
840
Concreting Landing Continuously adjusts to all column cross-sections up to max. 60 x 60 cm. Attachment is carried out using the crane eye of the concreting platform.
1524
51,400
620
037410
Climbing Systems
1521
Guardrail Landing 52, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1005 150
Column Formwork
1305
525
17,100
Guardrail Landing 134, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
Shoring Systems
150
1005
Slab Formwork
037430
50
1340
5,700
Climbing Systems
037440
Crane Hook Concreting Platform For assembling the concreting landing on the RAPID and QUATTRO column frames.
Safety Instructions Load-bearing point: capacity 1.0 t.
120
508
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
50
137
250
70
051410
11,700
Ladder 180/6, galv. As access for PERI formwork systems.
DW 15
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Plywood, SystemIndependent Accessories Service
1305
Item no. Weight kg 037420 10,200
Wall Formwork
Formwork Girders
QUATTRO Column Formwork
5 x 298 = 1490 1960
258
83
Formwork Girders
QUATTRO Column Formwork Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
405
End Ladder 180/2, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
Column Formwork
10,400
50
450
103724
Wall Formwork
210
Item no. Weight kg 051460 2,180
Slab Formwork
1200
Scaffolding, Stairs, Working Platforms
Ladder Connector QUATTRO For connecting ladders to QUATTRO column panels.
Complete with 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 160
4,890
SW 18
750
260
103391
Climbing Systems
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Wrench size SW 18.
Bridge- and Tunnel Formwork
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
Plywood, SystemIndependent Accessories
0,684
330
103718
Shoring Systems
1885
453
259
Service
298
Item no. Weight kg 104132 051450
15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Wall Formwork
750 / 1500
710
Column Formwork
704
Formwork Girders
QUATTRO Column Formwork
17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Slab Formwork
028010
min 2050
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
21,900
Climbing Systems
028020
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 2910
max 3800
Ø 70
Ø32
38,400
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
10
15
028030
Note Permissible load: see PERI Design Tables.
Plywood, SystemIndependent Accessories
min 4600
Service
Ø16,5
2775
max 6000
Ø48,3
260
4399
16,5
9
15
16,5
Ø 82,5
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Ø16,5
Formwork Girders
QUATTRO Column Formwork Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
Wall Formwork
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
max 1400
Ø 38
Ø30
Ø16x42
Ø16,5
10
10
13,000
Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1280
Slab Formwork
108135
Column Formwork
980
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
10
10
1171
16,900
Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 2030
Climbing Systems
028120
Shoring Systems
Item no. Weight kg 028110 5,180
max 2920
Ø16x42
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Ø11 Ø21 150
100
261
Service
Base Plate-2 for RSS For assembly of RSS push-pull props.
85
1,820
12
106000
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
10
10
1915
Scaffolding, Stairs, Working Platforms
Ø 70
Ø32
Service
262
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
TRIO Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
266 273 272 266 266 264 264 264 265 268 268 269 270 269 269 265 272 272 272 269 270 270 271 271 266 267 267 267 265 271 271 271 268 267 270 265 265
Plywood, SystemIndependent Accessories
Alignment Coupler BFD, galv. Anchor Bolt PERI MMS 20 x 130 Base Plate-2 for RSS Brace Connector TRIO, galv. Chamfer Strip 15/15 l = 2.70 m Column Panel TRS 120 x 90 Column Panel TRS 270 x 90 Column Panel TRS 60 x 90 Column Tie Bolt TRIO, galv. Concreting Landing Concreting Platform, compl. Crane Hook Concreting Platform End Ladder 180/2, galv. Guardrail Landing 134, galv. Guardrail Landing 52, galv. Inserting Nut, compl. Kicker AV Kicker AV 210 Kicker AV RSS III Ladder 180/6, galv. Ladder Base, galv. Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Lifting Gear "Combi"-2 TRIO Lifting Gear-3 TRIO Lifting Hook TRIO 1.5 t Lifting Pin TRIO Plug Ø 25 mm for TRS Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III Stacking Aid TRIO DW 20 Stacking Device TRIO, galv. TRIO Ladder connection TRS clamp DW 15, galv. Wingnut Pivot Plate DW 15, galv.
263
Service
023500 103606 106000 023660 054240 054210 054200 054220 054230 037410 037400 037440 103724 037430 037420 103721 028110 108135 028120 051410 051460 103718 051450 104132 044760 044770 023690 023440 030320 028010 028020 028030 750303 023390 103362 103716 030370
120 15 x 50 = 750
120
1200
75
Accessories Wingnut Pivot Plate DW 15, galv. Column Tie Bolt TRIO, galv. Column Panel TRS 60 x 90 Column panels for cross-sections up to 75 x 75 cm in 5 cm increments. 18 mm Fin-Ply formlining.
030370 054230
264
1,560 0,584
Accessories Wingnut Pivot Plate DW 15, galv. Column Tie Bolt TRIO, galv.
75
120
600
350 250
Bridge- and Tunnel Formwork
75
900
900
Plywood, SystemIndependent Accessories Service
2700
350 600 800
40,300
1550
600 350 358 484 358
054220
15 x 50 = 750
Column Panel TRS 120 x 90 Column panels for cross-sections up to 75x75 cm in 5 cm increments. 18 mm Fin-Ply formlining.
25 550 25
Climbing Systems
1,560 0,584
Scaffolding, Stairs, Working Platforms
030370 054230
75
75
25
69,900
15 x 50 = 750
Accessories Wingnut Pivot Plate DW 15, galv. Column Tie Bolt TRIO, galv.
850
054210
900 75
575
Wall Formwork Slab Formwork
1,560 0,584
Shoring Systems
030370 054230
575
Column Panel TRS 270 x 90 Column panels for cross-sections up to 75x75 cm in 5 cm increments. 18 mm Fin-Ply formlining.
325
Item no. Weight kg 054200 142,000
Column Formwork
Formwork Girders
TRIO Column Formwork
Formwork Girders
Inserting Nut, compl. For corner bracing of the TRIO column elements.
Complete with 1 pc. 103715 Bolt 14 x 160, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
75
160
40
Item no. Weight kg 103721 0,823
Wall Formwork
TRIO Column Formwork
Ø14
103716
2,200
Column Formwork
118
TRS clamp DW 15, galv. For corner bracing of the TRIO column elements. Slab Formwork
DW 15 Ø19 266
117
054230
0,584
Column Tie Bolt TRIO, galv. For corner bracing of the TRIO column elements.
Shoring Systems
338
Note Wrench size SW 30. 283
19
100 DW 15
Wingnut Pivot Plate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15. With pivoting captive nut. Maximum angle of tilting 8°.
Climbing Systems
1,560
Technical Data Permissible load 90 kN.
117
Scaffolding, Stairs, Working Platforms
030370
SW 30
72
Plug Ø 25 mm for TRS For closing unused tie holes Ø 25 mm and with TRIO column formwork. 21
265
Service
23
0,004
25
030320
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
110
Ø10
67
Column Formwork
2700
4,350
Alignment Coupler BFD, galv. For all panel connections for MAXIMO, TRIO and RUNDFLEX. Fillers up to 10 cm.
Slab Formwork
023500
Technical Data Permissible tension force 20.0 kN.
61
Shoring Systems
164
max 220
288
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
222
044760
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
169
Brace Connector TRIO, galv. For connecting push-pull props and kicker braces to MAXIMO and TRIO elements. Mounted on vertical and horizontal struts.
185
3,310
Climbing Systems
023660
259
26,100
Lifting Gear "Combi"-2 TRIO For transporting stacks of MAXIMO and TRIO elements. For attaching Lifting Hook TRIO 1.5 t and stacking devices.
Safety Instructions Follow Instructions for Use at all times.
350 0
266
144
Chamfer Strip 15/15 l = 2.70 m For TRIO column formwork and on external corners. Edge length 15 x 15 mm. 115
Item no. Weight kg 054240 1,900
Wall Formwork
Formwork Girders
TRIO Column Formwork
Formwork Girders
TRIO Column Formwork Lifting Gear-3 TRIO For transporting stacks of MAXIMO and TRIO elements.
Safety Instructions Follow Instructions for Use at all times!
Wall Formwork
Item no. Weight kg 044770 15,600
Column Formwork
35 0 0
Note Use 2 pieces per transportation unit. Safety Instructions Follow Instructions for Use at all times! Load-carrying capacity with crane sling angle ≤ 30°: Steel element 1.5 t. Aluminium element 750 kg.
60
208
523
80
Slab Formwork
Lifting Hook TRIO 1.5 t For transporting MAXIMO and TRIO elements.
Shoring Systems
7,050
112
023690
Stacking Device TRIO, galv. For stacking and transportation of 2-5 MAXIMO or TRIO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
023440
0,312
Lifting Pin TRIO For easy carrying of TRIO elements.
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
Scaffolding, Stairs, Working Platforms
7,060
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
150 260
267
Service
18
100
790
023390
100
Climbing Systems
184
56
037400
123,000
Concreting Platform, compl. Working and concreting platform for TRIO, RAPID and QUATTRO Column Formwork.
Complete with 1 pc. 037410 Concreting Landing 2 pc. 037420 Guardrail Landing 52, galv. 2 pc. 037430 Guardrail Landing 134, galv. 3 pc. 037440 Crane Hook Concreting Platform
Shoring Systems
1521
Slab Formwork
Column Formwork
25
Stacking Aid TRIO DW 20 Prevents elements sliding and protects the plywood formlining against damage. 22
Item no. Weight kg 750303 0,022
Wall Formwork
Formwork Girders
TRIO Column Formwork
1521
Climbing Systems
037410
51,400
Concreting Landing Continuously adjusts to all column cross-sections up to max. 60 x 60 cm. Attachment is carried out using the crane eye of the concreting platform.
Technical Data Permissible load 150 kg/m2.
1524 130
1524
840
Scaffolding, Stairs, Working Platforms
1420
Ø21
Bridge- and Tunnel Formwork
620
Ø14
Service
Plywood, SystemIndependent Accessories
710
268
Formwork Girders
TRIO Column Formwork
525
Wall Formwork Shoring Systems
120
508
137
Climbing Systems
Safety Instructions Load-bearing point: capacity 1.0 t.
Scaffolding, Stairs, Working Platforms
Crane Hook Concreting Platform For assembling the concreting landing on the RAPID and QUATTRO column frames.
11,700
Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
051410
DW 15
Bridge- and Tunnel Formwork
250
70
5 x 298 = 1490
83
1960
269
Plywood, SystemIndependent Accessories
5,700
50
Service
150 1340
037440
Slab Formwork
Guardrail Landing 134, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1005
17,100
50
1305
037430
Column Formwork
150
1005
Guardrail Landing 52, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1305
Item no. Weight kg 037420 10,200
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210
Item no. Weight kg 051460 2,180
405
103724
10,400
End Ladder 180/2, galv. As access for PERI formwork systems.
50
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Column Formwork
Wall Formwork
Formwork Girders
TRIO Column Formwork
103718
0,684
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
330
7,120
TRIO Ladder connection For connecting ladders to TRIO Column Panel TRS.
SW 18
Complete with 1 pc. 701763 Clamping Plate Fl 25 x 10 x 90 1 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
216 50
Ø20
921
469
270
SW 18
251
Scaffolding, Stairs, Working Platforms
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Wrench size SW 18.
Bridge- and Tunnel Formwork
103362
Plywood, SystemIndependent Accessories Service
1200 1885
Climbing Systems
Shoring Systems
Slab Formwork
298
Formwork Girders
TRIO Column Formwork Item no. Weight kg 15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Wall Formwork
104132 051450
Column Formwork
704
750 / 1500
710
17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 2050
Slab Formwork
028010
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
1915
min 2910
Climbing Systems
Note Permissible load: see PERI Design Tables.
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Bridge- and Tunnel Formwork
Note Permissible load: see PERI Design Tables.
min 4600
max 6000
Ø48,3
16,5
4399
16,5
9
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
Ø 82,5
38,400
15
028030
10
15
2775
Scaffolding, Stairs, Working Platforms
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
271
Plywood, SystemIndependent Accessories
21,900
Service
028020
Item no. Weight kg 028110 5,180
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables.
Wall Formwork
min 1080
max 1400
Ø30
Ø 38
Formwork Girders
TRIO Column Formwork
Ø16x42
Ø16,5
10
10
Column Formwork
980
13,000
Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Slab Formwork
108135
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1280
max 2100
Ø 70
Ø36
Shoring Systems
Ø16x42
Ø16,5
10
10
1171
16,900
Climbing Systems
028120
Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 2030
max 2920
Ø 70
Scaffolding, Stairs, Working Platforms
Ø32
Ø16x42
10
10
Bridge- and Tunnel Formwork
1,820
Base Plate-2 for RSS For assembly of RSS push-pull props.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
85
Ø11 Ø21
272
100
12
Plywood, SystemIndependent Accessories
106000
150
Service
Ø16,5
1915
Formwork Girders
TRIO Column Formwork
Wall Formwork
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
SW 30 MMS 20
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
138
Plywood, SystemIndependent Accessories
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
273
Service
Item no. Weight kg 103606 0,330
Service
274
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
LICO Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
279 277 277 276 276 276 278 278 278 279 279 277 277 278 279 277
Plywood, SystemIndependent Accessories
Base Plate-2 for RSS Brace Connector QR Chamfer Strip LICO I = 3.00 m Column Panel LICO 700 x 1000 Column Panel LICO 700 x 3000 Column Panel LICO 700 x 500 Concreting Platform LICO Concreting Platform LICO, Cover Concreting Platform LICO, Frame Kicker AV Kicker AV 210 Lifting Pin LICO Plug Ø 20 mm Push-Pull Prop RSS I Push-Pull Prop RSS II Spanner LICO
275
Service
106000 037530 111975 111957 111683 111964 115894 115896 115895 028110 108135 115019 030290 028010 028020 116432
Item no. Weight kg 111683 72,600
Column Panel LICO 700 x 3000 Column panels für cross-sections up to 20 x 20 cm to 60 x 60 cm in 5 cm increments. 12 mm Fin-Ply formlining.
Wall Formwork
Formwork Girders
LICO Column Formwork Complete with 4 pc. 111679 Column Tie Nut LICO DW 15 4 pc. 111682 Column Tie Bolt LICO DW 15 2 pc. 710130 Loop Bolt M20 x 40, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv. 48 pc. 030290 Plug Ø 20 mm 11 x 50 = 550
60
3000
250 698
111957
29,100
Column Panel LICO 700 x 1000 Column panels für cross-sections up to 20 x 20 cm to 60 x 60 cm in 5 cm increments. 12 mm Fin-Ply formlining.
Complete with 2 pc. 111679 Column Tie Nut LICO DW 15 2 pc. 111682 Column Tie Bolt LICO DW 15 2 pc. 710130 Loop Bolt M20 x 40, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv. 24 pc. 030290 Plug Ø 20 mm
500 250
1000
250
Climbing Systems
Shoring Systems
Slab Formwork
750
750
Column Formwork
750
80
500
88
Complete with 1 pc. 111679 Column Tie Nut LICO DW 15 1 pc. 111682 Column Tie Bolt LICO DW 15 2 pc. 710130 Loop Bolt M20 x 40, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv. 12 pc. 030290 Plug Ø 20 mm 250 250
Column Panel LICO 700 x 500 Column panels für cross-sections up to 20 x 20 cm to 60 x 60 cm in 5 cm increments. 12 mm Fin-Ply formlining.
698
Plywood, SystemIndependent Accessories Service
16,800
276
500
111964
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
698
Formwork Girders
LICO Column Formwork
Wall Formwork
Chamfer Strip LICO I = 3.00 m For attaching to the LICO column panels.
100
Item no. Weight kg 111975 1,080
Column Formwork
28
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Slab Formwork
Brace Connector QR For connecting push-pull props and kickers to QUATTRO and LICO panels.
Lifting Pin LICO
Climbing Systems
Plug Ø 20 mm For closing Ø 20 mm tie holes which are not required.
Note Delivery unit 500 pieces.
Scaffolding, Stairs, Working Platforms
0,002
Ø21
030290
260
Ø25
0,334
Q20
115019
93
Shoring Systems
24
Spanner LICO For tying LICO column formwork.
Plywood, SystemIndependent Accessories
106
0,957
Ø45
70
116432
Bridge- and Tunnel Formwork
13
376
277
Service
1,140
155
037530
Item no. Weight kg 115894 22,900
Concreting Platform LICO Working and concreting platform for LICO column formwork.
Technical Data Permissible load 150 kg/m2.
680
940
130
870
3,520
115895
17,600
Accessories Guardrail Post HSGP Concreting Platform LICO, Frame Working and concreting platform for LICO column formwork. Decking by customer.
Technical Data Permissible load 150 kg/m2.
870
Shoring Systems
130
680
940
670
034580
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
LICO Column Formwork
5,270
Concreting Platform LICO, Cover
Climbing Systems
115896
680
640
21
780
028010
17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Service
Plywood, SystemIndependent Accessories
min 2050
max 2940
Ø32
Ø 70
Ø16,5
Ø16,5
15
1915
278
10
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
480
Ø9
Formwork Girders
LICO Column Formwork Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
min 2910
max 3800
Wall Formwork
Item no. Weight kg 028020 21,900
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
5,180
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
Slab Formwork
028110
max 1400
Ø 38
Ø30
Ø16,5
Shoring Systems
Ø16x42
10
10
980
13,000
Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1280
Climbing Systems
108135
max 2100
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Ø11
Plywood, SystemIndependent Accessories
Base Plate-2 for RSS For assembly of RSS push-pull props.
85
1,820
Ø21 150
100
12
106000
Bridge- and Tunnel Formwork
10
10
1171
Scaffolding, Stairs, Working Platforms
Ø16x42
279
Service
Ø 70
Ø36
Service
280
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
VARIO GT 24 Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
289 289 284 283 282 282 286 286 287 284 284 282 288 289 289 286 286 287 287 287 287 288 288 288 285 282 282 282 282 283 283 285 285 283 282 284
Plywood, SystemIndependent Accessories
Anchor Bolt PERI MMS 20 x 130 Base Plate-2 for RSS Bolt Ø 20 x 205, galv. Chamfer Strip with Flange l = 2.50 m Column Waler SSRZ-U120, spec. length Column Waler SSRZ-U140, spec. length Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, right End Ladder 180/2, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24/A, galv. Hook Strap HB 24-100/120, galv. Kicker AV Kicker AV 210 Kicker AV RSS III Ladder 180/6, galv. Ladder Base, galv. Ladder Connector VARIO, adjustable Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III Scaffold Bracket GB 80 Steel Waler SSRZ U-100. Spec. Length Steel Waler SSRZ-24 U-100 l = 0.97/0.85 m Steel Waler SSRZ-24 U-100 l = 1,13/1,01 m Steel Waler SVRZ U-100 l = 1.20 m Tie Rod DW 15 l = 0.85 m Tie Yoke SKZ Wedge Headpiece, compl. Wedge K, galv. Wedge KZ, galv. Welding Unit for SSRZ Wingnut DW 15, galv.
281
Service
103606 106000 037160 031200 012040 012090 027070 027060 103724 028050 028070 024070 028110 108135 028120 051410 051460 111165 103718 051450 104132 028010 028020 028030 027110 012080 012150 012160 012050 030010 024210 028060 024250 024240 012300 030100
Item no. Weight kg 012150 012160
38,700 45,700
Steel Walers SSRZ-24 U100 Steel Waler SSRZ-24 U-100 l = 0.97/0.85 m Steel Waler SSRZ-24 U-100 l = 1.13/1.01 m For continuously adjustable column cross-sections 24 x 24 cm up to 48 x 60 cm or 40 x 40 cm up to 64 x 76 cm. Profile U100.
Note Special lengths and other profile sizes available on request.
175
Column Formwork
852 / 1012
Wall Formwork
Formwork Girders
VARIO GT 24 Column Formwork
22,000 28,000 33,000 0,000
012050
31,300
52
Steel Walers SSRZ, Special Length Steel Waler SSRZ U-100, Spec. Length Column Waler SSRZ-U120, spec. length Column Waler SSRZ-U140, spec. length Welding Unit for SSRZ
Note Special lengths and other profile sizes available on request.
300
Steel Waler SVRZ U-100 l = 1.20 m For continuously adjustable column cross-sections up to 80 x 120 cm in connection with Steel Waler SRU. Profile U100.
Ø21
1274
103871 103874 103877 103886 037160 024240
24,200 30,900 38,100 44,700 0,736 0,805
024070
0,460
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
300
Accessories Steel Waler Universal Steel Waler Universal Steel Waler Universal Steel Waler Universal Bolt Ø 20 x 205, galv. Wedge KZ, galv.
SRU SRU SRU SRU
U-120 U-120 U-120 U-120
l l l l
= = = =
Hook Strap HB 24-100/120, galv. For fixing GT 24 girders to Steel Waler SRZ and SRU Profile U100 - U120.
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN. M 8x70
162 (U 120)
282
52 152
0.97 m 1.22 m 1.47 m 1.72 m
152 (U 100)
Service
375
012080 012040 012090 012300
Climbing Systems
Shoring Systems
Slab Formwork
972 / 1132
82
Formwork Girders
VARIO GT 24 Column Formwork Chamfer Strip with Flange l = 2.50 m Plastic chamfer strip. 15
20
15
2500
Tie Yoke SKZ For tensioning on external corners with Steel Waler SRZ, SRU, U100 - U140 and VARIO couplings.
Column Formwork
2,180
146
024210
Wall Formwork
Item no. Weight kg 031200 0,470
0,805
Slab Formwork
Ø18
Wedge KZ, galv. For connecting panels with VARIO Couplings or Tie Yoke SKZ. 47
024240
48
Shoring Systems
161
20
Climbing Systems
254
Scaffolding, Stairs, Working Platforms
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN. DW 15
Bridge- and Tunnel Formwork
Tie Rod DW 15 l = 0.85 m
Plywood, SystemIndependent Accessories
1,220
283
Service
030010
Item no. Weight kg 030100 0,438
Wingnut DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN.
Wall Formwork
50
34
SW 27
110
Formwork Girders
VARIO GT 24 Column Formwork
Column Formwork
DW 15
0,736
Bolt Ø 20 x 205, galv. For corner bracing of the RAPID column frames.
Complete with 1 pc. 018060 Cotter Pin 4/1, galv.
205
125 Ø20
018060
0,030
028050
4,550
Climbing Systems
Accessories Cotter Pin 4/1, galv. Girder Headpiece GT 24, galv. For connecting push-pull props and kicker braces to GT 24 girders
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 145
Service
4,680
Girder Headpiece GT 24/A, galv. For connecting push-pull props and kicker braces to extended GT 24 girders in the area of the Extension Splice 24-2.
40 min 40
170
028070
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
14
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
145 14
40
170
min 52 max 100
Shoring Systems
Slab Formwork
037160
284
Formwork Girders
VARIO GT 24 Column Formwork Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 48
100
14
24
U100
U120
Wall Formwork
Wedge Headpiece, compl. For connecting push-pull props and kicker braces to Steel Waler SRZ and SRU Profile U100 - U140.
82
Item no. Weight kg 028060 1,910
Wedge K, galv. For Coupling Compression Plate KDP, Wedge Head Piece SRZ/SRU and Waler Connector SB-A,B,C. Slab Formwork
0,331
Ø8
Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
35
Climbing Systems
65
1050
899 66
757
Scaffolding, Stairs, Working Platforms
Ø7 85
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
180
600
Scaffold Bracket GB 80 For assembly of a working and concreting scaffold with VARIO GT 24.
120
11,000
460
027110
8
20
208
Shoring Systems
024250
Accessories Wedge K, galv.
285
Service
0,331
35
024250
Column Formwork
U140
Item no. Weight kg 027060 027070
14,100 14,000
Corner Scaffold Brackets EGB Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, left For assembling a working scaffold to panels with GT 24 girders. With securing bolts.
Note Illustration shows the Corner Scaffold Bracket EGB 24-80 R. Technical Data Permissible load 150 kg/m2 with a maximum width of influence 1.25 m.
120
Wall Formwork
Formwork Girders
VARIO GT 24 Column Formwork
Column Formwork
1050
460
35
72
9
85
Slab Formwork
600
1274
11,700
Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
051410
5 x 298 = 1490 1960
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
405
Plywood, SystemIndependent Accessories Service
2,180
210
051460
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Ø7
286
50
83
Formwork Girders
End Ladder 180/2, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Item no. Weight kg 103724 10,400
298
1200
Wall Formwork
VARIO GT 24 Column Formwork
Column Formwork
1885
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Spanner Size SW 18.
Slab Formwork
0,684
330
103718
Shoring Systems
SW 18
Ladder Connector VARIO, adjustable For connecting ladders to Steel Walers SRZ and SRU, Profile U100 - U120.
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Climbing Systems
6,080
90
111165
293
Scaffolding, Stairs, Working Platforms
835
min 0
max 111
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
710
Plywood, SystemIndependent Accessories
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
704
15,600 25,200
750 / 1500
104132 051450
Bridge- and Tunnel Formwork
454
287
Service
U100 / U120
Formwork Girders
VARIO GT 24 Column Formwork Item no. Weight kg 028010 17,800
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Wall Formwork
min 2050
max 2940
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
1915
21,900
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Slab Formwork
028020
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Shoring Systems
10
15
2775
38,400
Climbing Systems
028030
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
min 4600
16,5
Ø 82,5
Scaffolding, Stairs, Working Platforms
4399
16,5
5,180
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
9
15
028110
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
max 1400
Ø 38
Ø30
Ø16x42
Ø16,5
288
10
980
10
Service
max 6000
Ø48,3
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Note Permissible load: see PERI Design Tables.
Formwork Girders
VARIO GT 24 Column Formwork Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1280
Wall Formwork
Item no. Weight kg 108135 13,000
max 2100
Ø 70
Ø36
Ø16x42
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 2030
Slab Formwork
Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Base Plate-2 for RSS For assembly of RSS push-pull props.
Climbing Systems
1,820
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
85
Ø11
Scaffolding, Stairs, Working Platforms
106000
10
10
1915
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
Bridge- and Tunnel Formwork
0,330
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
SW 30
Plywood, SystemIndependent Accessories
103606
100
12
Ø21 150
Shoring Systems
16,900
MMS 20 138
289
Service
028120
Column Formwork
10
10
1171
Service
290
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
SRS Column Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
292 297 297 293 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 293 294 294 293 296 296 297 294 294 295 295 295 295 295 296 296
Plywood, SystemIndependent Accessories
Adapter Strip SRS-TRIO l = 3,00 m Anchor Bolt PERI MMS 20 x 130 Base Plate-2 for RSS Circular Column Landing 25-70 Circular Column Panel Ø 25 cm h = 0.3 m Circular Column Panel Ø 25 cm h = 1.2 m Circular Column Panel Ø 25 cm h = 2.4 m Circular Column Panel Ø 25 cm h = 3.0 m Circular Column Panel Ø 30 cm h = 0.3 m Circular Column Panel Ø 30 cm h = 1.2 m Circular Column Panel Ø 30 cm h = 2.4 m Circular Column Panel Ø 30 cm h = 3.0 m Circular Column Panel Ø 35 cm h = 0.3 m Circular Column Panel Ø 35 cm h = 1.2 m Circular Column Panel Ø 35 cm h = 2.4 m Circular Column Panel Ø 35 cm h = 3.0 m Circular Column Panel Ø 40 cm h = 0.3 m Circular Column Panel Ø 40 cm h = 1.2 m Circular Column Panel Ø 40 cm h = 2.4 m Circular Column Panel Ø 40 cm h = 3.0 m Circular Column Panel Ø 45 cm h = 0.3 m Circular Column Panel Ø 45 cm h = 1.2 m Circular Column Panel Ø 45 cm h = 2.4 m Circular Column Panel Ø 45 cm h = 3.0 m Circular Column Panel Ø 50 cm h = 0.3 m Circular Column Panel Ø 50 cm h = 1.2 m Circular Column Panel Ø 50 cm h = 2.4 m Circular Column Panel Ø 50 cm h = 3.0 m Circular Column Platform 25-70, compl. End Ladder 180/2, galv. Exit Handrail Post SRS 134 Guardrail Landing 134, galv. Kicker AV Kicker AV 210 Kicker AV RSS III Ladder 180/6, galv. Ladder Base, galv. Ladder Connector SRS Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS III
291
Service
045200 103606 106000 045211 045010 045011 045012 045013 045020 045021 045022 045023 045030 045031 045032 045033 045040 045041 045042 045043 045050 045051 045052 045053 045060 045061 045062 045063 045210 103724 103417 037430 028110 108135 028120 051410 051460 103374 103718 051450 104132 028010 028020 028030
Formwork Girders Wall Formwork Column Formwork
Item no. Weight kg 045010 045011 045012 045013 045020 045021 045022 045023 045030 045031 045032 045033 045040 045041 045042 045043 045050 045051 045052 045053 045060 045061 045062 045063
23,200 63,000 98,900 120,000 25,200 67,700 107,000 130,000 26,400 71,500 114,000 139,000 28,400 76,300 123,000 150,000 31,000 82,000 132,000 161,000 32,800 86,500 140,000 171,000
Circular Column Panels Circular Column Panel Ø 25 cm h = 0.3 m Circular Column Panel Ø 25 cm h = 1.2 m Circular Column Panel Ø 25 cm h = 2.4 m Circular Column Panel Ø 25 cm h = 3.0 m Circular Column Panel Ø 30 cm h = 0.3 m Circular Column Panel Ø 30 cm h = 1.2 m Circular Column Panel Ø 30 cm h = 2.4 m Circular Column Panel Ø 30 cm h = 3.0 m Circular Column Panel Ø 35 cm h = 0.3 m Circular Column Panel Ø 35 cm h = 1.2 m Circular Column Panel Ø 35 cm h = 2.4 m Circular Column Panel Ø 35 cm h = 3.0 m Circular Column Panel Ø 40 cm h = 0.3 m Circular Column Panel Ø 40 cm h = 1.2 m Circular Column Panel Ø 40 cm h = 2.4 m Circular Column Panel Ø 40 cm h = 3.0 m Circular Column Panel Ø 45 cm h = 0.3 m Circular Column Panel Ø 45 cm h = 1.2 m Circular Column Panel Ø 45 cm h = 2.4 m Circular Column Panel Ø 45 cm h = 3.0 m Circular Column Panel Ø 50 cm h = 0.3 m Circular Column Panel Ø 50 cm h = 1.2 m Circular Column Panel Ø 50 cm h = 2.4 m Circular Column Panel Ø 50 cm h = 3.0 m Circular column panel made of steel. With captive column bolt.
B X Y 620 290 200 620 290 200 620 290 200 620 290 200 670 310 210 670 310 210 670 310 210 670 310 210 720 340 210 720 340 210 720 340 210 720 340 210 770 360 230 770 360 230 770 360 230 770 360 230 820 390 250 820 390 250 820 390 250 820 390 250 870 410 240 870 410 240 870 410 240 870 410 240 Note Item no. and weight are per column element (halfshell). Safety Instructions Load-bearing point capacity 1.0 t.
h
Climbing Systems
X Y Y
Shoring Systems
Slab Formwork
SRS Column Formwork
B
045200
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Ø
4,070
Adapter Strip SRS-TRIO l = 3,00 m For connecting SRS circular column elements with TRIO panel formwork. Made of aluminium.
3000
110
18
292
Formwork Girders
SRS Column Formwork Item no. Weight kg 045210 139,000
Circular Column Platform 25-70, compl. Working and concreting platform for SRS Steel Circular Column Ø 25 cm up to 70 cm.
Complete with 1 pc. 045211 Circular Column Landing 25-70 4 pc. 037430 Guardrail Landing 134, galv.
Circular Column Landing 25-70 Fits every circular column cross-section from Ø 25 cm to 70 cm in 5 cm increments.
Technical Data Permissible load 150 kg/m2.
Shoring Systems
66,800
1554
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
1340
50
Plywood, SystemIndependent Accessories
1005
Guardrail Landing 134, galv. As guardrails for PERI concreting platforms. Locks in place automatically.
1305
17,100
213
150
037430
Climbing Systems
1472
130
293
Service
045211
Slab Formwork
Column Formwork
Wall Formwork
.
Item no. Weight kg 051410 11,700
Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Wall Formwork
Formwork Girders
SRS Column Formwork
5 x 298 = 1490
83
Column Formwork
1960
2,180
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210 405
10,400
End Ladder 180/2, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
298
14,100
Exit Handrail Post SRS 134 For circular column landings 25-70. 1 for each access.
1005 150
1305
103417
Plywood, SystemIndependent Accessories Service
1200 1885
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
50
450
103724
Climbing Systems
Shoring Systems
Slab Formwork
051460
550 1340
294
50
Formwork Girders
SRS Column Formwork Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Spanner Size SW 18.
Wall Formwork
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
330
Item no. Weight kg 103718 0,684
Column Formwork
SW 18
Complete with 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90 1 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. Slab Formwork
Ladder Connector SRS For connecting ladders to SRS circular column elements up to Ø 70 cm.
992
15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
50
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Climbing Systems
104132 051450
Shoring Systems
469
450
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
Note Permissible load: see PERI Design Tables.
min 2050
max 2940
Ø32
Ø16,5
Ø16,5
1915
10
Push-Pull Prop RSS I Extension length L = 2.05 - 2.94 m. For aligning PERI formwork systems.
Ø 70
17,800
15
028010
704
750 / 1500
710
295
Plywood, SystemIndependent Accessories
9,860
Service
103374
Formwork Girders
SRS Column Formwork Item no. Weight kg 028020 21,900
Push-Pull Prop RSS II Extension length L = 2.91 - 3.80 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Wall Formwork
min 2910
max 3800
Ø 70
Ø32
Ø16,5
Ø16,5
Column Formwork
10
15
2775
38,400
Push-Pull Prop RSS III Extension length L = 4.60 - 6.00 m. For aligning PERI formwork systems.
Note Permissible load: see PERI Design Tables.
Slab Formwork
028030
min 4600
4399
16,5
Kicker AV Extension length L = 1.08 - 1.40 m. For aligning PERI formwork systems.
9
15
Shoring Systems
5,180
Climbing Systems
028110
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 1080
max 1400
Ø 38
Scaffolding, Stairs, Working Platforms
Ø30
Ø16x42
Ø16,5
10
10
980
108135
13,000
Kicker AV 210 Extension length L = 1.28 - 2.10 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables.
Plywood, SystemIndependent Accessories
min 1280
max 2100
Ø36
Ø 70
Ø16x42
Ø16,5
10
1171
296
10
Bridge- and Tunnel Formwork
Ø 82,5
Ø48,3
16,5
Service
max 6000
Formwork Girders
SRS Column Formwork Kicker AV RSS III Extension length L = 2.03 - 2.92 m. For aligning PERI formwork systems.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Design Tables. min 2030
Wall Formwork
Item no. Weight kg 028120 16,900
max 2920
Ø 70
Ø32
Ø16x42
Ø16,5
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
85
Ø11
Climbing Systems
Note Permissible load: see PERI Design Tables. Wrench size SW 30.
SW 30 MMS 20 138
Scaffolding, Stairs, Working Platforms
Anchor Bolt PERI MMS 20 x 130 Re-usable anchor bolt for mounting push-pull props, bracing etc.
Bridge- and Tunnel Formwork
0,330
Plywood, SystemIndependent Accessories
103606
100
12
Ø21 150
Column Formwork Slab Formwork
Base Plate-2 for RSS For assembly of RSS push-pull props.
Shoring Systems
1,820
297
Service
106000
10
10
1915
Service
298
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
SKYDECK Panel Slab Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
307 307 302 301 301 301 301 302 301 301 304 305 303 303 306 306 301 300 300 308 307 308 304 300 300 300 300 300 300 304 305 305 306 302 309 309 304 305 308 303 303 307 303
Plywood, SystemIndependent Accessories
Anchor Chain 3,0 kN l = 2.5 m Base Plate for RS, compl. Combihead SCK Cover Strip SAL 150 Cover Strip SAL 37.5 Cover Strip SAL 50 Cover Strip SAL 75 Drophead SFK Edge Beam SRT-2 150 Edge Beam SRT-2 75 End Support SSL Erection Aid SSH, Alu Filler Timber SPH 150 Filler Timber SPH 225 Guardrail Holder SGH, Alu Guardrail Post SGP Main Beam SLT 150 Main Beam SLT 225 Main Beam SLT 375 Pallet Lifting Trolley 1500 mm Pallet SD 150 x 225, galv. Pallet SD 150 x 75, galv. Panel Clip SPK Panel SDP 150 x 37.5 Panel SDP 150 x 50 Panel SDP 150 x 75 Panel SDP 75 x 37.5 Panel SDP 75 x 50 Panel SDP 75 x 75 Panel Wedge Clip SPKK Platform SDB 150 Platform SDB 225 Platform SDB 300 Prophead SSK Stripping Cart ASW 465, compl. Stripping Cart, Alu Table Connector STV Tension Sleeve SAO Transportation Fork SUG, galv. Triangular Frame SDR 150 x 75 Triangular Frame SDR 75 x 75 Turnbuckle 3.0 kN, M 12 Wall Holder SWH-2
299
Service
065073 028100 061180 061026 061038 061024 061027 061210 061045 061046 061023 061300 061049 061036 061250 061260 061110 061100 061160 061510 061530 061500 061290 061020 061011 061000 061030 061013 061010 061280 061060 061061 061062 061200 102031 035500 061052 061310 061520 061021 061022 065074 061051
061000 061011 061020 061010 061013 061030
15,500 11,700 9,780 8,560 6,350 5,250
Panels SDP Panel SDP 150 x 75 Panel SDP 150 x 50 Panel SDP 150 x 37.5 Panel SDP 75 x 75 Panel SDP 75 x 50 Panel SDP 75 x 37.5 Panel with 9 mm plywood.
L 1500 1500 1500 750 750 750
B 750 500 375 750 500 375
Slab Formwork
B 99
21
L 120
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
SKYDECK Panel Slab Formwork
061160
25,500
Main Beam SLT 375 For cantilevers.
Shoring Systems
240
3750
1042
450
750
375
375
450
300
750
450
300
82
061100
15,500
266
Main Beam SLT 225 For standard fields.
Scaffolding, Stairs, Working Platforms
Climbing Systems
12
300
1042
240
2250
2244 450
375
375
Bridge- and Tunnel Formwork
12
300
Service
Plywood, SystemIndependent Accessories
82
300
266
Formwork Girders
SKYDECK Panel Slab Formwork Item no. Weight kg 061110 9,690
Main Beam SLT 150 For filler areas.
190
Wall Formwork
1500
1494 1120
190
12
190
Column Formwork
80
1,690 0,849 0,561 0,427
Cover Strips SAL Cover Strip SAL 150 Cover Strip SAL 75 Cover Strip SAL 50 Cover Strip SAL 37.5 Plastic. Panel with 21 mm plywood. For use with drophead SFK.
L 1500 750 500 375
Slab Formwork
061026 061027 061024 061038
Shoring Systems
L
Climbing Systems Scaffolding, Stairs, Working Platforms
Edge Beams SRT-2 Edge Beam SRT-2 150 Edge Beam SRT-2 75 For longitudinal and transverse filling, for shuttering around columns. Panel with 21 mm plywood. 1500 / 750
Bridge- and Tunnel Formwork
1488 / 738 49
Plywood, SystemIndependent Accessories
301
Service
5,740 2,720
98
061045 061046
53
22
78
Item no. Weight kg 061210 6,180
Drophead SFK With self-locking coupling. Supports main beam as well as cover strip and formlining. Lowering height 6 cm. For 21 mm plywood formlining.
Wall Formwork
Formwork Girders
SKYDECK Panel Slab Formwork
250
60
061200
3,860
Prophead SSK With self-locking coupling. Supports main beams, panels, edge girders and filler timber.
061180
5,340
Combihead SCK With self-locking coupling. Supports main beams, panels, edge girders and filler timber.
Service
Plywood, SystemIndependent Accessories
250
Bridge- and Tunnel Formwork
305
302
250 161
259
50
260
50 161
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
549
390
258
40
Formwork Girders
SKYDECK Panel Slab Formwork Item no. Weight kg 3,350 5,020
Filler Timbers SPH Filler Timber SPH 150 Filler Timber SPH 225 For compensations with 21 mm plywood formlining.
Wall Formwork
061049 061036
1500 / 2250
98
Column Formwork
49
Triangular Frames SDR Triangular Frame SDR 150 x 75 Triangular Frame SDR 75 x 75 For compensations on inclined walls. For compensations with 21 mm plywood formlining. 1500 / 750
750
Shoring Systems
98
Slab Formwork
8,650 5,340
Bridge- and Tunnel Formwork
100
Plywood, SystemIndependent Accessories
202
Scaffolding, Stairs, Working Platforms
Climbing Systems
Wall Holder SWH-2 For horizontal anchoring on the wand. Attach to every second girder or panel.
1102
5,250
1490
061051
303
Service
061021 061022
End Support SSL For the transition to compensation. Connecting to Drophead SKF.
102
160
Item no. Weight kg 061023 2,140
Wall Formwork
Formwork Girders
SKYDECK Panel Slab Formwork
86
Column Formwork
165
0,133
Panel Clip SPK Fixes panel on main beam.
121 50
061280
0,780
33
Panel Wedge Clip SPKK Fixes panel on main beam.
116
061052
Scaffolding, Stairs, Working Platforms
Climbing Systems
116
Shoring Systems
Slab Formwork
061290
Table Connector STV For assembling SKYDECK Slab Tables. Also allows the fixing of intermediate props on the main beam. 86
Bridge- and Tunnel Formwork
70
330
Plywood, SystemIndependent Accessories Service
2,590
80
304
Formwork Girders
SKYDECK Panel Slab Formwork Erection Aid SSH For forming with SKYDECK. Adjustable in 7.5 cm increments.
Wall Formwork
Item no. Weight kg 061300 2,240
Column Formwork
2325 - 3750
Shoring Systems
Technical Data Permissible load 150 kg/m2.
1288
Platform SDB 225 Work and safety scaffold. Scaffold width 1.30 m. With continuous 39 mm thick decking and foldable handrail frame.
Technical Data Permissible load 150 kg/m2.
Bridge- and Tunnel Formwork
153,000
Plywood, SystemIndependent Accessories
061061
1433
Scaffolding, Stairs, Working Platforms
1490
2240
305
Service
Platform SDB 150 Work and safety scaffold. Scaffold width 1.30 m. With continuous 39 mm thick decking and foldable handrail frame.
1006
108,000
70
Climbing Systems
143
061060
Slab Formwork
Technical Data Permissible tension force 3.0 kN.
1220
Tension Sleeve SAO For bracing cantilevered main beams.
62
0,996
125
061310
Item no. Weight kg 061062 185,000
Platform SDB 300 Work and safety scaffold. Scaffold width 1.30 m. With continuous 39 mm thick decking and foldable handrail frame.
Technical Data Permissible load 150 kg/m2.
2990
061250
4,760
Guardrail Holder SGH, Alu For assembling a guardrail with SKYDECK.
1500
300
061260
6,150
061260
6,150
Accessories Guardrail Post SGP Guardrail Post SGP As guardrail for different systems.
35
306
65
1438 1768
433
433
Bridge- and Tunnel Formwork
120
Scaffolding, Stairs, Working Platforms
Climbing Systems
1640
Plywood, SystemIndependent Accessories Service
368
245
300
Shoring Systems
5
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
SKYDECK Panel Slab Formwork
Formwork Girders
SKYDECK Panel Slab Formwork Anchor Chain 3.0 kN l = 2.5 m
Technical Data Permissible tension force 3.0 kN.
Wall Formwork
15
Item no. Weight kg 065073 1,370
2500
Turnbuckle 3.0 kN, M 12
Technical Data Permissible tension force 3.0 kN. 16
Column Formwork
0,450
1,830
Base Plate for RS, compl. For assembly of RS push-pull props.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 85
Ø13
Shoring Systems
028100
max 300
Slab Formwork
min 220
90
150
Scaffolding, Stairs, Working Platforms
Climbing Systems
Complete with 5 pc. 100707 Lashing 25 x 5750 mm Safety Instructions Load-bearing capacity 750 kg. Follow Instructions for Use!
2110
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Pallet SD 150 x 225, galv. For stacking and transportation of 48 SKYDECK panels 150 x 75.
250
82,400
1550
061530
10
Ø21
2310
307
Service
065074
Pallet SD 150 x 75, galv. For stacking and transportation of 14 SKYDECK Panels 150 x 75.
Safety Instructions Load-bearing capacity 1.0 t. Follow Instructions for Use!
1720
Column Formwork Slab Formwork
110,000
Pallet Lifting Trolley 1500 mm For moving pallets and crate pallets.
Shoring Systems
061510
1970
Item no. Weight kg 061500 76,700
Wall Formwork
Formwork Girders
SKYDECK Panel Slab Formwork
1510
640
1630
760
Technical Data Forklift arm length 1500 mm, forklift arm width 520 mm, stroke range 85 - 195 mm. Safety Instructions Load-carrying capacity 2.0 t. Follow Instructions for Use at all times!
061520
Transportation Fork SUG, galv. For moving SKYDECK slab tables.
Safety Instructions Follow Instructions for Use at all times. Load-carrying capacity 1.0 t.
2800 1429
Plywood, SystemIndependent Accessories Service
403,000
3240
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
.
3900
308
1224
Formwork Girders
SKYDECK Panel Slab Formwork Stripping Cart, Alu Mobile working scaffold. Height-adjustable in 25 cm increments. Platform height max. 2.00 m.
Technical Data Permissible load 100 kg/m2.
Shoring Systems
Complete with 1 pc. 102033 Steel Traverse 140/220 ASW 1 pc. 102025 Folding Base Unit 160/190 ASW 6 pc. 102035 Vertical Frame 70/90 ASW 2 pc. 102026 Entry Platform 190 ASW 1 pc. 102030 Toe-Board Set 70/190 ASW 4 pc. 102027 Double Guardrail 190 ASW 3 pc. 102028 Diagonal Brace 210 ASW 2 pc. 102029 Horizontal Brace 190 ASW 8 pc. 102037 Wind Security Clip 60 ASW 12 pc. 102807 Ballast 10 kg ASW Technical Data Permissible load 100 kg/m2.
Climbing Systems
Stripping Cart ASW 465, compl. Mobile working scaffold. Height-adjustable in 30 cm increments. Platform height max. 4.65 m. Packed in: Ring Pallet USP 104 Item no. 100678, with Lashing Strap Item no. 100707 (x 1) and Scaffold Tube Steel Item no. 026411 (x 4).
102033
Scaffolding, Stairs, Working Platforms
102034 102035
102027
102028 102029
2360
102037
1100
102807
102030
309
Plywood, SystemIndependent Accessories
102026
Bridge- and Tunnel Formwork
102025
Service
363,000
1150
102031
750
Slab Formwork
1800
Column Formwork
3035
Wall Formwork
Item no. Weight kg 035500 72,800
Service
310
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
GRIDFLEX Grid Element Slab Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
314 315 314 317 315 312 312 312 313 315 316 316 317 313 313 315 312 314 316 316 314 314 313
Plywood, SystemIndependent Accessories
Anchor Chain 3,0 kN l = 2.5 m Base Plate for RS, compl. Clamp GFK Corner Platform GCP, complete Extension GF 10 Filler Element Cross GFC 200 x 100 Filler Element Longitudinal GFL 150 x 100 Filler Element Longitudinal GFL 183 x 20 Guardrail GF 100 Head Spindle GTR 38-70/50 Palett GF 85 x 210, galv. Palett RP 80 x 110, galv. Platform GIP 200, complete Prophead GFH, galv. Shuttering Aid GFA Stacking Device GRIDFLEX, galv. Standard Element GFP 200 x 100 Tension Sleeve GFO Tension Strap Rail GF 125 Tension Strap Rail GF 92 Traverse GFT Turnbuckle 3.0 kN, M 12 Wall Holder GFW
311
Service
065073 028100 110556 111379 111392 110040 110486 110646 110326 111291 111738 111396 111566 109910 110044 110939 110038 110595 115385 115427 110045 065074 110238
Formwork Girders
GRIDFLEX Grid Element Slab Formwork Item no. Weight kg 110038 20,300
Standard Element GFP 200 x 100 Aluminium, nailable, white powder-coated. 100
80
100
980
80
Column Formwork
5 x 167
Wall Formwork
1994
110040
22,100
Filler Element Cross GFC 200 x 100 Aluminium, nailable, red powder-coated.
Shoring Systems
1850
15,000
Climbing Systems
110486
Filler Element Longitudinal GFL 150 x 100 Aluminium, nailable, yellow powder-coated.
110646
5,800
100
980
Scaffolding, Stairs, Working Platforms
Filler Element Longitudinal GFL 183 x 20 Aluminium, nailable yellow powder-coated. 1830
167 100 80
312
207
Bridge- and Tunnel Formwork
80
5 x 167
1507
Plywood, SystemIndependent Accessories Service
1041
5 x 167
Slab Formwork
1980
Formwork Girders
GRIDFLEX Grid Element Slab Formwork Item no. Weight kg 109910 0,845
Prophead GFH, galv. With spring tetention. Supports GRIDFLEX elements.
Column Formwork
58
120
Wall Formwork
137
4,880
Wall Holder GFW For horizontal anchoring ot the formwork on the wall.
1500
Shoring Systems
Slab Formwork
110238
Technical Data Adjustable in 7.5 cm increments.
7,150
Guardrail GF 100 As guardrail for cantilevers. Guardrail height above top edge of plywood = 1.30 m.
970
Plywood, SystemIndependent Accessories
110326
max 3925
Bridge- and Tunnel Formwork
min 2225
Scaffolding, Stairs, Working Platforms
Shuttering Aid GFA For forming of GRIDFLEX.
313
Service
2,370
1448
110044
Climbing Systems
110 80
100
Item no. Weight kg 110556 0,797
Clamp GFK, galv. For attaching filler panels to the standard elements.
Column Formwork
97
44
Wall Formwork
Formwork Girders
GRIDFLEX Grid Element Slab Formwork
180
5,120
Traverse GFT With securing wedge for fixing to the main beam of the element.
Slab Formwork
110045
Note For assembly of length compensation, with props as centre support and support for cantilever elements on the slab edge. 57
Shoring Systems
42
60
997
0,411
Climbing Systems
110595
Tension Sleeve GFO For bracing cantilevered elements.
Technical Data Permissible force 3.0 kN. 80
Scaffolding, Stairs, Working Platforms
71
63
065074
0,450
Turnbuckle 3.0 kN, M 12
Technical Data Permissible tension force 3.0 kN.
Service
065073
1,370
Anchor Chain 3.0 kN l = 2.5 m
max 300
Technical Data Permissible tension force 3.0 kN.
15
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
16
min 220
2500
314
Formwork Girders
GRIDFLEX Grid Element Slab Formwork Base Plate for RS, compl. For assembly of RS push-pull props.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 85
Ø13
Wall Formwork
Item no. Weight kg 028100 1,830
90
150
4,600
Head Spindle GTR 38-70/50 For using GRIDFLEX in combination with PERI UP shoring.
Column Formwork
111291
10
Ø21
80 120
Slab Formwork
708
Ø14
Complete with 2 pc. 111392 Extension GF 10 Safety Instructions Load capacity 175 kg per ring, 350 kg per stack Follow Instructions for Use!
Climbing Systems
Stacking Device GRIDFLEX, galv. For stacking 10 Standard Element GFP 200 x 100, Filler Element Cross GFC 200 x 100 or Filler Element Longitudinal GFL 150 x 100 respectively. Suitable for crane and fork-lift transport. 2 pieces per stack.
959 468
111392
2,970
Extension GF 10
Scaffolding, Stairs, Working Platforms
Accessories Tension Strap Rail GF 92 Tension Strap Rail GF 125
Plywood, SystemIndependent Accessories
2,090 4,230
835
115427 115385
190
Bridge- and Tunnel Formwork
1085
Ø48,3
315
Service
21,700
491
110939
Shoring Systems
38
Tension Strap Rail GF 92 As transport protection for GRIDFLEX Elements GFP 200 x 100 and GFL 150 x 100. Yellow powder-coated.
130
933
4,230
Tension Strap Rail GF 125 As transport protection for GRIDFLEX Elements GFC 200 x 100. Red powder-coated.
43
115385
1258
111396
28,100
Palett RP 80 x 110, galv. For stacking GF 100 guardrails.
Shoring Systems
Complete with 4 pc. 111392 Extension GF 10 Safety Instructions Load-bearing capacity 500 kg. Follow Instructions for Use! 1010
750
493
693
878
953
1140
111738
Plywood, SystemIndependent Accessories Service
63,900
Palett GF 85 x 210, galv. For stacking and transportation of GRIDFLEX Filler Panel GFL 183 x 20 and Main Beam BD 210 or Crossbeam BD 210.
880
Safety Instructions Load-bearing capacity 750 kg. Follow Instructions for Use!
1095
925
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
385
230
Slab Formwork
161
Column Formwork
33
Item no. Weight kg 115427 2,090
Wall Formwork
Formwork Girders
GRIDFLEX Grid Element Slab Formwork
2190
316
1020
Formwork Girders
GRIDFLEX Grid Element Slab Formwork Complete with 1 pc. 111703 Platform Frame GIP 200 1 pc. 111700 Platform Handrail GIP 200 2 pc. 111702 Main Beam GIP 200 1 pc. 111701 Cross Beam GIP 200 Technical Data Permissible load 150 kg/m2.
Wall Formwork
Platform GIP 200, complete Platform with 12 mm thick decking and insertable guardrail. Delivered as individual components.
Column Formwork
Item no. Weight kg 111566 106,000
1610
Slab Formwork
2130
Scaffolding, Stairs, Working Platforms
Climbing Systems
Complete with 1 pc. 111378 Corner Platform GCP 2 pc. 111332 Handrail GCP 130, galv. 1 pc. 111340 Handrail GCP 160, galv. 1 pc. 111324 Internal Angle GCP Technical Data Permissible live load 150 kg/m2.
2360
1479
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
317
Service
2600
Corner Platform GCP, complete Platform with 21 mm thick decking and insertable guardrail. Delivered as individual components.
881
265,000
1300
111379
Shoring Systems
2035
Service
318
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
MULTIFLEX Girder Slab Formwork
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
324 322 324 323 322 322 322 323 322 322 325 325 325 320 320 320 320 320 320 320 320 320 320 320 320 320 320 320 320 320 320 321 321 321 321 321 321 321 321 321 321 321 325 321 324 324 326 326 323 323
Plywood, SystemIndependent Accessories
Assembly Bar 24, galv. Bolt Ø 14 x 107, galv. Brace Clamp HL, galv. Brace Clamp, galv. Clawhead 16/20 S, galv. Clawhead 16/20, galv. Clawhead 24 S, galv. Cotter Pin 4/1, galv. Crosshead 20/24 S, galv. Crosshead 20/24, galv. Double Head Nail l = 65 mm Erection Bar GT/VT, galv. Framing Clip, galv. Girder GT 24 l = 0.90 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.80 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.70 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.90 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.80 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.70 m Girder GT 24 l = 6.00 m Girder VT 20K l = 1.45 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.90 m Girder VT 20K l = 3,90 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.60 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.90 m Girder VT 20K l = 5.90 m Guardrail Holder Lowering Head 20/24, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. Stripping Cart ASW 465, compl. Stripping Cart, Alu Tension Strap 16-25, galv. Universal Tripod, galv.
319
Service
027930 027990 027790 027940 028660 028670 028890 018060 028680 027890 018280 070740 018290 075100 075120 075150 075180 075210 075240 075270 075300 075330 075360 075390 075420 075450 075480 075510 075540 075570 075600 074990 074905 074910 074890 074920 074950 074930 074940 074960 074970 074980 035700 028870 103434 103429 102031 035500 028590 028000
Formwork Girders Wall Formwork
Item no. Weight kg 075100 075120 075150 075180 075210 075240 075270 075300 075330 075360 075390 075420 075450 075480 075510 075540 075570 075600
Slab Formwork
Column Formwork
MULTIFLEX Girder Slab Formwork 5,300 7,100 8,900 10,600 12,400 14,200 15,900 17,700 19,500 21,200 23,000 24,800 26,600 28,300 30,100 31,900 33,600 35,400
Girders GT 24 Girder GT 24 l = 0.90 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.80 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.70 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.90 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.80 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.70 m Girder GT 24 l = 6.00 m Universal formwork girder made of wood.
L 918 1214 1510 1806 2102 2398 2694 2990 3286 3582 3878 4174 4470 4766 5062 5358 5654 5950 Note Construction Approvel No .Z-9.1-157. The common lengths of the GT 24 are colourcoded to allow easy handling. Technical Data perm. Q = 14.0 kN perm. Q = 13.0 kN perm. M = 7.0 kNm ly = 8000 cm4 Q = perm. shear force Compression Strut Q = perm. shear force Tension Strut D
Shoring Systems
Z
D Z
Climbing Systems
L
Scaffolding, Stairs, Working Platforms
311
296
60
Service
Plywood, SystemIndependent Accessories
28 80
320
240
120
Bridge- and Tunnel Formwork
60
163
296
Formwork Girders
MULTIFLEX Girder Slab Formwork Item no. Weight kg Girders VT 20K with Steel Cap Girder VT 20K l = 1.45 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.90 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.60 m Girder VT 20K l = 3,90 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.90 m Girder VT 20K l = 5.90 m Formwork girder made of wood. Webs are rounded for reducing damage.
L 1450 2150 2450 2650 2900 3300 3600 3900 4500 4900 5900 Note Construction Approvel No .Z-9.1-216. Technical Data perm. Q = 11.0 kN perm. M = 5.0 kNm ly = 4290 cm4
Wall Formwork
8,560 12,700 14,460 15,640 17,110 19,470 21,240 23,010 26,550 28,910 34,810
Column Formwork
074990 074905 074910 074890 074920 074930 074940 074950 074960 074970 074980
140
140
Climbing Systems
200
40
120
40
100
Ø22
Shoring Systems
100
100
Slab Formwork
L
27
170
85
Ø6,5 210
321
Plywood, SystemIndependent Accessories
155
Service
240
Bridge- and Tunnel Formwork
Note Required hole diameter of the prop end plate Ø 40 mm. Lowering range 4 cm.
125
Lowering Head 20/24, galv. For tilt-resistant support of one or two GT 24 or VT 20 girders. Girder overlap on both sides minimum 16.3 cm for GT 24 and 15 cm for VT 20.
42 10 195
5,430
136
028870
Scaffolding, Stairs, Working Platforms
80
Item no. Weight kg 028680 027890
3,190 3,080
Crossheads 20/24, galv. Crosshead 20/24 S, galv. Crosshead 20/24, galv. With or without self-locking coupling. For postioning intermediate props on the VT 20 girder without nailing.
Note Required hole diameter of the prop end plate Ø 40 mm.
240
155
170
85
Ø6,5
Clawheads 24, galv. Clawhead 24 S, galv. Clawhead 24 L, galv. With or without self-locking coupling. For postioning intermediate props on the GT 24 girder without nailing.
Note Required hole diameter of the prop end plate Ø 40 mm.
280
161 3 64
80
Shoring Systems Climbing Systems
125
158
1,650 1,540
Slab Formwork
028890 028880
Ø10
028660 028670
1,040 0,936
Clawhead 16/20, galv. Clawhead 16/20 S, galv. Clawhead 16/20, galv. With or without self-locking coupling. For postioning intermediate props on the VT 20 girder without nailing.
Note Required hole diameter of the prop end plate Ø 40 mm.
140
44
80
161 3
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
210
6
Column Formwork
195
Wall Formwork
Formwork Girders
MULTIFLEX Girder Slab Formwork
Ø10
027990
0,150
Bolt Ø 14 x 107, galv. For different connections. 129
Plywood, SystemIndependent Accessories
107
Ø26
Ø5,5
Ø14
Service
018060
322
0,030
Accessories Cotter Pin 4/1, galv.
Formwork Girders
MULTIFLEX Girder Slab Formwork Item no. Weight kg 018060 0,030
Cotter Pin 4/1, galv. For pins up to Ø 25 mm.
Wall Formwork
Ø4
0,568
Tension Strap 16-25, galv. For mounting 2 GT 24 or VT 20 girders on the Crosshead Spindle and Adjustable Crosshead Spindle TR 38.
Note Spanner Size SW 19.
Column Formwork
028590
1,840
Brace Clamp, galv. For assembly of 3 x 15 cm stiffening boards on slab props Ø 48 - 76 mm.
Climbing Systems
027940
Safety Instructions Only use as assembly aid!
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
555 186 210
40
Plywood, SystemIndependent Accessories
400
323
Service
Universal Tripod, galv. Erection aid for slab props with Ø 48 - 120 mm and 120 x 120 mm. Can also be used in combination with MULTIPROP MP Slab Props and Base MP 50.
800
9,170
Shoring Systems
110
SW 19
028000
Slab Formwork
270
210
Item no. Weight kg 027790 2,460
Brace Clamp HL, galv. For assembly of 3 x 15 cm stiffening boards on slab props Ø 76 - 89 mm and 100 x 100 mm to 120 x 120 mm.
Wall Formwork Column Formwork
239
210
450
1280 / 1580
880
1080 / 1380
680
100
6,120
800
Assembly Bar 24, galv. For shuttering of MULTIFLEX with GT 24 girders. 95
027930
Ø34
49
Bridge- and Tunnel Formwork
20
1572
Plywood, SystemIndependent Accessories Service
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
1200 / 1500
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Pallets RP-2, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. For stacking and transporting formwork and scaffolding components.
324
600
33,400 40,200
Slab Formwork
103434 103429
40
850
Formwork Girders
MULTIFLEX Girder Slab Formwork
Formwork Girders
MULTIFLEX Girder Slab Formwork Erection Bar GT/VT, galv. For shuttering of MULTIFLEX with GT 24 or VT 20 girders.
85
Wall Formwork
150
Item no. Weight kg 070740 2,980
190
Column Formwork
1711
Guardrail Holder For mounting a fall protection. Adjustable from 20 - 420 mm. Slab Formwork
9,790
120
035700
30
min 20 max 420
Shoring Systems
995
460
65
Scaffolding, Stairs, Working Platforms
Framing Clip, galv. For connecting crossed timbers or girders.
98
1,000
Accessories Double Head Nail l = 65 mm
018280
1,000
Double Head Nail l = 65 mm
Plywood, SystemIndependent Accessories
018280
Ø4,8
Bridge- and Tunnel Formwork
36
Note Delivery unit: carton with 1000 pieces. 75 65 Ø3,1
325
Service
0,098
185
018290
Climbing Systems
35
311
Item no. Weight kg 035500 72,800
Stripping Cart, Alu Mobile working scaffold. Height-adjustable in 25 cm increments. Platform height max. 2.00 m.
Technical Data Permissible load 100 kg/m2.
Column Formwork
3035
Wall Formwork
Formwork Girders
MULTIFLEX Girder Slab Formwork
102031
363,000
Stripping Cart ASW 465, compl. Mobile working scaffold. Height-adjustable in 30 cm increments. Platform height max. 4.65 m. Packed in: Ring Pallet USP 104 Item no. 100678, with Lashing Strap Item no. 100707 (x 1) and Scaffold Tube Steel Item no. 026411 (x 4).
Climbing Systems
Shoring Systems
Slab Formwork
1800
750
Complete with 1 pc. 102033 Steel Traverse 140/220 ASW 1 pc. 102025 Folding Base Unit 160/190 ASW 6 pc. 102035 Vertical Frame 70/90 ASW 2 pc. 102026 Entry Platform 190 ASW 1 pc. 102030 Toe-Board Set 70/190 ASW 4 pc. 102027 Double Guardrail 190 ASW 3 pc. 102028 Diagonal Brace 210 ASW 2 pc. 102029 Horizontal Brace 190 ASW 8 pc. 102037 Wind Security Clip 60 ASW 12 pc. 102807 Ballast 10 kg ASW Technical Data Permissible load 100 kg/m2.
102033
Scaffolding, Stairs, Working Platforms
102034 102035
Bridge- and Tunnel Formwork
102025
Service
Plywood, SystemIndependent Accessories
1150
102026
102027
102028 102029
2360
102037
1100 102030
326
102807
Service
327
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
328
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
PERI Table Modules VT, SRU
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
338 337 333 337 337 333 338 333 334 335 334 334 332 336 336 331 332 335 332 332 330 330 331 331 331 337
Plywood, SystemIndependent Accessories
Attachment 100 for Striking Trolley Back Stop Lifting Fork 1 t / 5,0 m Bottom Frame SRU/UZ Central cross 170 Central cross 200 Connector SRU/UZ Extension 60 for Striking Trolley External Bracket SRU/UZ Guardrail Holder GT24/VT20 Guardrail Holder SRU/SRZ Guardrail Holder Guardrail Post SGP Internal Bracket SRU/UZ Lifting Fork 1 t / 5,0 m Lifting Fork 1,75 t / 8,0 m Stiffening Board, 420 x 400 mm Swivel Head SRU Table Lift Truck PTL 1250 Table Module SRU 200/215 x 500 Table Module SRU 200/265 x 500 Table Module VT 200/215 x 400 Table Module VT 200/215 x 500 Table Swivel Head, Lower Part Table Swivel Head, Middle Part Table Swivel Head, Upper Part-2 Table Trolley 2 t, l = 2.00 m
329
Service
028720 102210 112919 101854 102251 112920 104050 112918 101290 104131 035700 061260 112921 101862 103212 100778 112498 108108 112782 112783 072700 072710 100956 100954 110422 028710
Item no. Weight kg 072700 072720
397,000 450,000
Wall Formwork
Formwork Girders
PERI Table Modules VT, SRU Table Modules VT Table Module VT 200/215 x 400 Table Module VT 250/265 x 400 Pre-assembled table module formwork element with 21 mm thick plywood formlining. With table swivel head, upper and middle parts.
Note Permissible load: see PERI Design Tables.
2150 / 2650 2000 / 2500
75
325 / 575
1500
325 / 575
Column Formwork
429
75
2500
750
Climbing Systems
Shoring Systems
2150 / 2650
Slab Formwork
750
4000
100956
11,900
072710 072730
502,000 567,000
Accessories Table Swivel Head, Lower Part Table Modules VT Table Module VT 200/215 x 500 Table Module VT 250/265 x 500 Pre-assembled table module formwork element with 21 mm thick plywood formlining. With table swivel head, upper and middle parts.
Note Permissible load: see PERI Design Tables.
75
325 / 575
1500
325 / 575
Bridge- and Tunnel Formwork
2350
1150
750
Plywood, SystemIndependent Accessories
2150 / 2650
750
5000
100956 Service
2000 / 2500
429
Scaffolding, Stairs, Working Platforms
2150 / 2650 75
330
11,900
Accessories Table Swivel Head, Lower Part
Formwork Girders
PERI Table Modules VT, SRU
256
Ø7
Wall Formwork
Table Swivel Head, Upper Part-2 For assembling PERI Table Module VT.
400
Ø15
6 x 50 = 300
60
Table Swivel Head, Middle Part For assembling PERI Table Module VT.
Complete with 2 pc. 100960 Distorsion Fuse 2 pc. 710338 Mininut Slab Formwork
9,130
Shoring Systems
260
244
256
397
100954
Column Formwork
472
370
11,900
Table Swivel Head, Lower Part For assembling PERI Table Module VT. With quickrelease clamp for slab props from Ø 57 mm as well as PERI MULTIPROP props.
Technical Data Bearing capacity 56.0 kN.
Climbing Systems
100956
270
Scaffolding, Stairs, Working Platforms
278
Stiffening Board, 420 x 400 mm For assembling PERI Table Module VT.
Plywood, SystemIndependent Accessories
1,720
400
100778
180
Bridge- and Tunnel Formwork
370
420
21
331
Service
Item no. Weight kg 110422 5,640
Item no. Weight kg 112782 112783
632,000 697,000
Table Modules SRU Table Module SRU 200/215 x 500 Table Module SRU 200/265 x 500 Pre-assembled, rentable slab table. Plywood 21 mm.
Wall Formwork
Formwork Girders
PERI Table Modules VT, SRU Complete with 4 pc. 112498 Swivel Head SRU
2150 / 2650 2000 / 2500
75
325 / 575
1500
325 / 575
Column Formwork
430
75
3000
1000
Shoring Systems
2150 / 2650
Slab Formwork
1000
5000
13,300
Complete with 2 pc. 104031 Bolt Ø 21 x 120 2 pc. 018060 Cotter Pin 4/1, galv.
202
Internal Bracket SRU/UZ Internal frame for Beam Formwork SRU/UZ. Height adjustable in 50 mm increments.
Complete with 2 pc. 113012 Bolt Ø 20 x 260, galv. 2 pc. 711063 Sleeve ISO 8752 5 x 35, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
300
720
730
Ø21 Ø9
Ø9
166 296
332
200
15,100
295
120 80
112921
Plywood, SystemIndependent Accessories Service
Swivel Head SRU With wedge connection for fixing slab props up to max. Ø 89 mm.
510
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
112498
Formwork Girders
PERI Table Modules VT, SRU External Bracket SRU/UZ External frame for SRU/ZU Beam Formwork. Complete with handrail post. Height-adjustable in 100 mm increments.
Complete with 2 pc. 113012 Bolt Ø 20 x 260, galv. 2 pc. 711063 Sleeve ISO 8752-5 x 35, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
1250
1140
Wall Formwork
Item no. Weight kg 112918 29,500
Column Formwork
152 550
2070
52
Bottom Frame SRU/UZ Bottom frame for Beam Formwork SRU/UZ. Adjustable in 50 cm increments. With integrated support bearings.
Note Required hole diameter of the prop end plate Ø 40 mm.
Ø21
172
472
Climbing Systems
32,000
200
112919
Shoring Systems
30
Slab Formwork
1000
6 x 100 = 600
Ø21
25
9 x 50 = 450
100
25
500 1150
Plywood, SystemIndependent Accessories
100 210
50
320
333
Service
Ø21
660
100
Bridge- and Tunnel Formwork
Complete with 3 pc. 113012 Bolt Ø 20 x 260, galv. 3 pc. 711063 Sleeve ISO 8752-5 x 35, galv. 3 pc. 018060 Cotter Pin 4/1, galv.
560
Connector SRU/UZ For connecting and bracing the Bodenriegel SRU/ UZ to the Steel Waler SRU. Adjustable in 50 cm increments.
7x50 = 350
8,080
50
112920
Scaffolding, Stairs, Working Platforms
152
52
Ø9
Guardrail Holder For mounting a fall protection. Adjustable from 20 - 420 mm. 120
Item no. Weight kg 035700 9,790
Wall Formwork
30
35
311
061260
6,150
Guardrail Post SGP As guardrail for different systems.
35
101290
5,670
Guardrail Holder GT24/VT20 For assembling a guardrail on GT 24 and VT 20 girders.
395
117
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
1768
Complete with 1 pc. 105400 Bolt Ø 20 x 140, galv. 1 pc. 018060 Cotter Pin 4/1, galv. 81
Service
1438
65
32
061260
334
6,150
Accessories Guardrail Post SGP
Ø21
352
Scaffolding, Stairs, Working Platforms
Climbing Systems
433
433
Shoring Systems
120
Slab Formwork
Column Formwork
995
460
65
min 20 max 420
Formwork Girders
PERI Table Modules VT, SRU
Formwork Girders
PERI Table Modules VT, SRU
495
45
Column Formwork Slab Formwork
Technical Data Utilisation height 1.60 m up to 5.00 m. Required voltage for charging process 230 V, 50/60 Hz. Safety Instructions Follow Instructions for Use at all times! Floor conveyor vehicle, load-carrying capacity 1.25 t.
Climbing Systems
Shoring Systems
1700
1921
Scaffolding, Stairs, Working Platforms
Table Lift Truck PTL 1250 For moving PERI slab tables. Not approved for transporting site personnel! Only move on clean and flat surfaces with a sufficient load-bearing capacity.
1000
Bridge- and Tunnel Formwork
1460,000
Plywood, SystemIndependent Accessories
108108
Accessories Guardrail Post SGP
max 5000
6,150
140
min 1570
061260
Wall Formwork
Complete with 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
1140
335
Service
Guardrail Holder SRU/SRZ For assembling a guardrail to the Steel Walers SRU and SRZ, Profile U 100 to U 140.
308
Item no. Weight kg 104131 3,940
Item no. Weight kg 103212 1610,000
Lifting Fork 1,75 t / 8,0 m For moving PERI slab tables. Table length up to 8.0 m
Safety Instructions Follow Instructions for Use at all times! Load-carrying capacity 1.75 t.
3031
Column Formwork
11378
Wall Formwork
Formwork Girders
PERI Table Modules VT, SRU
Slab Formwork
5798
2910
1250
1250
4x 150
575,000
Lifting Fork 1 t / 5,0 m For moving PERI slab tables. Table length up to 5.0 m
Safety Instructions Follow Instructions for Use at all times! Load-carrying capacity 1.0 t.
Bridge- and Tunnel Formwork
2528
7759
Scaffolding, Stairs, Working Platforms
Climbing Systems
101862
3991
750
750
Service
3x 150
336
2013
1800
900
3x 150
Plywood, SystemIndependent Accessories
4353
2269
Shoring Systems
800
2000
4x 150
6298
Formwork Girders
PERI Table Modules VT, SRU Back Stop Lifting Fork 1 t / 5,0 m As stop for Transportation Fork 1t / 5.0 m. Always use in pairs.
Wall Formwork
Item no. Weight kg 102210 8,190
Column Formwork
123
900
742
50
123
Table Trolleys 2 t Table Trolley 2 t, l = 2.00 m Table Trolley 2 t, l = 1.70 m For moving PERI slab tables. Not approved for transporting site personnel! Only move on clean and flat surfaces with a sufficient load-bearing capacity.
Technical Data Utilisation height 1.45 m up to 3.20 m With Extension 100 up to 4.20 m With Extension 100 und Extension 60 up to 4.80 m. Safety Instructions Follow Instructions for Use at all times! Lifting equipment according to BGV D8. Load-carrying capacity per winch 1.0 t.
Slab Formwork
433,000 428,000
Shoring Systems
028710 028715
150
1700 / 2000 1310 / 1610
1500
Climbing Systems
min 1450
max 3160
min 1460 max 2060
2330 / 2630
Bridge- and Tunnel Formwork
26,200 21,200
Central crosses Central cross 200 Central cross 170 For Table Striking and Transportation Trolly 2 t, l = 2.00 m or 1.70 m.
Plywood, SystemIndependent Accessories
102251 101854
Accessories Central cross 200 Central cross 170
1370 / 1670
60
337
Service
26,200 21,200
830
102251 101854
Scaffolding, Stairs, Working Platforms
1640
Item no. Weight kg 028720 34,600
Wall Formwork
Formwork Girders
PERI Table Modules VT, SRU Attachment 100 for Striking Trolley 2 pieces per Table Striking and Transportation Trolley. Use telescopic arm of the trolley. With the Extension 100, the working height of the trolley increases: min. height 2.45 m, max. height 4.20 m 1270
Ø17
995
Column Formwork
100
200 150 M 16x45
104050
Shoring Systems
Slab Formwork
105
15,100
Extension 60 for Striking Trolley 2 pieces per Table Striking and Transportation Trolley. With the Extension 60 and Extension 100, the working height of the trolley increases: min. height 3.05 m, max. height 4.80 m 200
600
100
M 16x45
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
150
338
Service
339
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
340
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Beam Formwork UZ, AW, UZR
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
344 343 343 343 344 342 342 342 343
Plywood, SystemIndependent Accessories
AW Bracket AW Clamp 8-10 AW Handrail Post AW Slab Stopend Angle Beam Waler UZR 190/150 UZ Beam Bracket 40 UZ Beam Width Adjustment Bar 129 UZ Beam Width Adjustment Bar 80 UZ Beam Yoke Waler 100
341
Service
065075 065072 065071 065070 028790 065056 065065 065057 065058
Item no. Weight kg 065056 10,900
UZ Beam Bracket 40 For forming beams up to 80 cm high. With captive Hook Tie and Wingnut Counterplate.
Note Permissible load: see PERI Design Tables.
Wall Formwork
440
Ø17
5 50
Column Formwork
Ø7
500 66
7,060
UZ Beam Width Adjustment Bar 80 For use with UZ Beam Bracket 40. For beam width max. 40 cm. 85
065057
967
215
Ø7 Ø14
065065
10,000
UZ Beam Width Adjustment Bar 129 For use with UZ Beam Bracket 40. For beam width max. 90 cm. 85
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
84
Ø7
155
Formwork Girders
Beam Formwork UZ, AW, UZR
1457 Ø7
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
215
Ø14
342
Formwork Girders
UZ Beam Yoke Waler 100 For carrying one or two GT 24 girders per side along with additional support.
60
Item no. Weight kg 065058 8,650
Column Formwork
120
1000
Wall Formwork
Beam Formwork UZ, AW, UZR
Ø3,5
50
86
Ø6,5
AW Handrail Post For assembling the guardrail on the Slab Stopend Angle AW. Secure rear end with nails.
Climbing Systems
7,410
AW Clamp 8-10 For clamping the AW Slab Stopend Angle to girders or timbers with 8-10 cm thickness. With captive Triple Wingnut.
275
90
3,270
132
065072
67
Bridge- and Tunnel Formwork
772
Scaffolding, Stairs, Working Platforms
1439
500
065071
68
Shoring Systems
400
Slab Formwork
Note Permissible load: see PERI Design Tables.
279
343
Plywood, SystemIndependent Accessories
AW Slab Stopend Angle For forming slabs and beams up to 40 cm thick.
Service
1,670
240
065070
AW Bracket As filler for the AW Slab Stopend Angle. For height adjustment of side girder.
min 40 max 220
240
Item no. Weight kg 065075 1,750
Wall Formwork
Formwork Girders
Beam Formwork UZ, AW, UZR
67
Column Formwork
140
Beam Waler UZR 190/150 For simultaneous assembly of beam and slab formwork. MULTIPROP props or PD 8 frames are used as support.
Note Permissible load: see PERI Design Tables.
300
44,700
420
Slab Formwork
028790
152 12 x 100 = 1200
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
1500
Plywood, SystemIndependent Accessories Service
Ø17 Ø14
120
Ø9
110
Shoring Systems
1900
344
64
Ø51,3
Service
345
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
346
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
MULTIPROP
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
354 354 354 354 354 354 350 353 354 356 353 353 352 355 353 354 348 348 348 349 349 349 349 349 349 349 348 348 348 356 356 350 352 355 348 348 348 348 348 349 349 349 349 352 355 351 351 355 351 351 351 350
Plywood, SystemIndependent Accessories
Alu Beam MPB 24 l = 3.00 m Alu Beam MPB 24 l = 3.60 m Alu Beam MPB 24 l = 4.20 m Alu Beam MPB 24 l = 4.80 m Alu Beam MPB 24 l = 5.40 m Alu Beam MPB 24 l = 6.00 m Base MP 50 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Brace Connector MPB 24 Compression Brace Head MP/SRU Connector MP-SRU Connector MPV-2 Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Coupling MPB 24 Frame MRK 120 Frame MRK 137,5 Frame MRK 150 Frame MRK 180 Frame MRK 201,5 Frame MRK 225 Frame MRK 230 Frame MRK 237 Frame MRK 266 Frame MRK 296 Frame MRK 62,5 Frame MRK 75 Frame MRK 90 Guardrail Holder SRU/SRZ Guardrail Post SGP Ladder 220 x 350, telescopic MULTIPROP Bolt with Nut MULTIPROP Bolt with Nut MULTIPROP MP 120 MULTIPROP MP 250 MULTIPROP MP 350 MULTIPROP MP 480 MULTIPROP MP 625 MULTIPROP Platform 150 x 60 MULTIPROP Platform 150 x 60 with Hatch MULTIPROP Platform 225 x 60 MULTIPROP Platform 225 x 60 with Hatch MULTIPROP Strap SRZ U100 - U140 Quick Strap MPB 24/GT 24 Scaffold Tube Coupler MG-A/C Scaffold Tube Coupler MG-B/D Strap MPB 24 Tilting Base MKF Tilting Forkhead MKK Universal Tripod, galv. Wing Nut Spanner HD
347
Service
079300 079360 079420 079480 079540 079600 027310 104031 104031 108213 107161 107160 027301 018060 018060 107348 028340 028380 028350 113799 028460 028360 028470 028480 028490 028370 028390 028400 028330 104131 061260 107173 111142 111142 027288 027289 027290 027291 027305 107169 107171 107170 107172 027302 108339 027298 027299 107820 027296 027297 028000 022027
027288 027289 027290 027291 027305
10,300 15,600 19,700 25,000 34,800
MULTIPROP MP MULTIPROP MP 120 MULTIPROP MP 250 MULTIPROP MP 350 MULTIPROP MP 480 MULTIPROP MP 625 Slab prop made of aluminium. Used as individual prop as well as in combination with MULTIPROP Frames MRK to form towers.
80
Ø14
120
10
min. L max. L 800 1200 1450 2500 1950 3500 2600 4800 4300 6250 Note Approved by the German Building Authorities No. Z-8.312-824. Permissible load: see PERI Design Tables.
64
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
MULTIPROP
Ø40
87
10
028390 028400 028330 028340 028380 028350
9,890 10,100 11,300 14,000 15,400 16,300
MULTIPROP Frame MRK, Steel Frame MRK 62,5 Frame MRK 75 Frame MRK 90 Frame MRK 120 Frame MRK 137,5 Frame MRK 150 Bracing frame for MULTIPROP. For connecting to outer and inner tube. With captive wedge coupling.
L 545 670 820 1120 1295 1420
X 625 750 900 1200 1375 1500
Service
Plywood, SystemIndependent Accessories
500
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
min L
10
0
max L
Slab Formwork
150
L X
348
Formwork Girders
MULTIPROP Item no. Weight kg L 1720 1935 2170 2220 2290 2580 2880
X 1800 2015 2250 2300 2370 2660 2960
Wall Formwork
MULTIPROP Frames MRK, Aluminum Frame MRK 180 Frame MRK 201,5 Frame MRK 225 Frame MRK 230 Frame MRK 237 Frame MRK 266 Frame MRK 296 Bracing frame for MULTIPROP. For connecting to outer and inner tube. With captive wedge coupling.
Column Formwork
10,900 11,600 12,400 12,500 12,700 13,900 14,800
500
113799 028460 028360 028470 028480 028490 028370
12,000 18,000
MULTIPROP Platforms MULTIPROP Platform 150 x 60 MULTIPROP Platform 225 x 60 For assembly of a working scaffold.
Technical Data Permissible load up to 200 kg/m2.
Climbing Systems
91
107169 107170
Shoring Systems
Slab Formwork
L X
Bridge- and Tunnel Formwork
Technical Data Permissible load up to 200 kg/m2.
Plywood, SystemIndependent Accessories
1500 / 2250
349
Service
MULTIPROP Platforms with Hatch MULTIPROP Platform 150 x 60 with Hatch MULTIPROP Platform 225 x 60 with Hatch For assembly of working scaffold. Self-locking hatch opening for access ladder.
91
12,500 18,500
595
107171 107172
Scaffolding, Stairs, Working Platforms
595
1500 / 2250
Item no. Weight kg 107173 9,000
Ladder 220 x 350, telescopic As access for MULTIPROP towers. Mounted to decking with hatch.
Technical Data Extension length 2.20 - 3.50 m.
Column Formwork
min 2200
max 3500
Wall Formwork
Formwork Girders
MULTIPROP
022027
4,230
330
Wing Nut Spanner HD For easy release of the Head Spindle HDK 45 and MULTIPROP slab props. 985
Ø48
027310
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
65
8,900
Base MP 50 For use with slab props with an end plate thickness of 6-10 mm. With clamped quick-release fastener.
Service
Plywood, SystemIndependent Accessories
350
Ø12,5
80
Ø 89
Ø42
200
Bridge- and Tunnel Formwork
500
150
Formwork Girders
MULTIPROP
240
155
170
85
Wall Formwork
Tilting Forkhead MKK For tilt-resistant support of one or two GT 24 or VT 20 girders. Can be pivoted up to 3° on all sides. With clamped quick-release fastener.
Ø6,5
195
Item no. Weight kg 027297 8,730
150 80
6,220
Tilting Base MKF For use on inclined assembly areas. Tiltable on all sides up to 3°. With clamped quick-release fastener.
Slab Formwork
027296
Column Formwork
min 120 max 220
Ø12,5
Ø 38
Shoring Systems
80
150
min 120 max 220
Ø12,5
140
1,930 1,930
Scaffold Tube Coupler Scaffold Tube Coupler MG-A/C Scaffold Tube Coupler MG-B/D For connecting scaffold tubes Ø 48 mm to the MULTIPROP MP slab props.
Climbing Systems
027298 027299
Bridge- and Tunnel Formwork
Safety Instructions Only use as assembly aid!
Plywood, SystemIndependent Accessories
Universal Tripod, galv. Erection aid for slab props with Ø 48 - 120 mm and 120 x 120 mm. Can also be used in combination with MULTIPROP MP slab props and Base MP 50.
800
9,170
555
028000
132
Scaffolding, Stairs, Working Platforms
191 70
132
351
Service
70
95
95
191
SW 19
Formwork Girders
MULTIPROP Item no. Weight kg 027301 1,020
Connector MPV-2 For connecting 2 MULTIPROP slab props.
60
25
80
Wall Formwork
100
Column Formwork
Ø12
0,082
Slab Formwork
111142
MULTIPROP Bolt with Nut For connecting 2 MULTIPROP slab props and assembly of accessories on the Alu Beam MPB 24.
Note Wrench size SW 19.
40
SW 19
Shoring Systems
M 12
Climbing Systems
027302
2,100
MULTIPROP Strap SRZ U100 - U140 For fixing Steel Walers SRZ and SRU, Profile U100 to U140 on MULTIPROP slab props.
Note Wrench size SW 24.
250
50
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
232
Scaffolding, Stairs, Working Platforms
SW 24
352
Formwork Girders
MULTIPROP Item no. Weight kg 107161 3,050
Compression Brace Head MP/SRU As connecting element between MULTIPROP slab props and Steel Waler SRU/SRZ. 50
120
107160
3,960
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv.
Slab Formwork
0,462 0,030
120
Connector MP-SRU As compensation element between the Prop Head MP/SRU and inclined positioned Steel Waler SRU. 48
131
325
Shoring Systems
104031 018060
Column Formwork
242
Wall Formwork
60
Ø21
52
104031
0,462
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv. Bolt Ø 21 x 120 For different connections.
Scaffolding, Stairs, Working Platforms
0,462 0,030
207 122 Ø6
0,030
018060
0,030
Accessories Cotter Pin 4/1, galv.
Plywood, SystemIndependent Accessories
018060
Bridge- and Tunnel Formwork
Ø21
Cotter Pin 4/1, galv. For pins up to Ø 25 mm. Ø4
353
Service
104031 018060
Climbing Systems
100
Formwork Girders
Item no. Weight kg 079300 079360 079420 079480 079540 079600
24,000 28,800 33,700 38,500 43,300 48,100
Alu Beam MPB 24 Alu Beam MPB 24 l = Alu Beam MPB 24 l = Alu Beam MPB 24 l = Alu Beam MPB 24 l = Alu Beam MPB 24 l = Alu Beam MPB 24 l = Aluminium main beam system.
3.00 m 3.60 m 4.20 m 4.80 m 5.40 m 6.00 m for the MULTIPROP
Column Formwork
Wall Formwork
MULTIPROP L 2998 3598 4198 4798 5398 5998 Note Permissible load: see PERI design tables Technical Data perm. Q = 50 kN perm. A = 80 kN perm. M = 15 kNm
L
Shoring Systems
240
Slab Formwork
80
107348
9,530
Coupling MPB 24 For connecting the Alu Beam MPB 24. 950
48
Scaffolding, Stairs, Working Platforms
Climbing Systems
129
Ø21
104031 018060
0,462 0,030
104031
0,462
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv. Bolt Ø 21 x 120 For different connections. 207
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
122 Ø6
Ø21
018060
354
0,030
Accessories Cotter Pin 4/1, galv.
Formwork Girders
MULTIPROP Item no. Weight kg 018060 0,030
Cotter Pin 4/1, galv. For pins up to Ø 25 mm.
Wall Formwork
Ø4
0,203
Quick Strap MPB 24/GT 24 For assembly of GT 24 girders on the Alu Beam MPB 24.
Column Formwork
108339
80
68
Ø7
Slab Formwork
70
1,000
107820
0,057
Accessories Double Head Nail l = 65 mm Strap MPB 24 For fixing Alu Beam MPB 24 to the MULTIPROP prop or mounting the GT 24 girder on the Alu Beam MPB 24. 65
Climbing Systems
018280
Shoring Systems
67
Ø5
12
Scaffolding, Stairs, Working Platforms
46
Ø8,5
Ø13
0,082
MULTIPROP Bolt with Nut For connecting 2 MULTIPROP slab props and assembly of accessories on the Alu Beam MPB 24.
Bridge- and Tunnel Formwork
111142
Accessories MULTIPROP Bolt with Nut Note Wrench size SW 19.
40
Plywood, SystemIndependent Accessories
0,082
SW 19 M 12
355
Service
111142
Item no. Weight kg 108213 2,590
Brace Connector MPB 24 For connecting push-pull props or bracing to Aluminium Beam MPB 24.
Ø22
Wall Formwork
Formwork Girders
MULTIPROP
267
82 14
Ø16,5
104031 018060
0,462 0,030
104131
3,940
Guardrail Holder SRU/SRZ For assembling a guardrail to the Steel Walers SRU and SRZ, Profile U 100 to U 140.
Complete with 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv.
45
308
061260
6,150
061260
6,150
140
Accessories Guardrail Post SGP Guardrail Post SGP As guardrail for different systems.
35
356
65
1438 1768
Bridge- and Tunnel Formwork
433
433
120
Scaffolding, Stairs, Working Platforms
Climbing Systems
495
Plywood, SystemIndependent Accessories Service
120
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv.
Shoring Systems
Slab Formwork
Column Formwork
205
Service
357
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
358
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
PEP 10, 20, 30 Slab Props
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
362 362 361 361 361 361 361 361 361 361 361 361 361 361 361 361 362 362 362 362 360 360 360 360 360 360 360 360 360 363 361
Plywood, SystemIndependent Accessories
Brace Clamp, galv. Crosshead PEP 10 / VT 20, galv. PEP Frames PRK 100 PEP Frames PRK 120 PEP Frames PRK 137,5 PEP Frames PRK 150 PEP Frames PRK 180 PEP Frames PRK 200 PEP Frames PRK 201,5 PEP Frames PRK 210 PEP Frames PRK 225 PEP Frames PRK 230 PEP Frames PRK 266 PEP Frames PRK 296 PEP Frames PRK 62,5 PEP Frames PRK 75 Prop PEP 10-250 A Prop PEP 10-300 A Prop PEP 10-350 A Prop PEP 10-400 A Prop PEP 20-300 Prop PEP 20-350 Prop PEP 20-400 Prop PEP 20-500 Prop PEP 30-150 Prop PEP 30-250 Prop PEP 30-300 Prop PEP 30-350 Prop PEP 30-400 Tripod PEP 10 Universal Tripod, galv.
359
Service
027940 106989 112813 112814 111813 111814 115980 112718 111815 112788 111816 111817 111818 111819 111811 111812 106434 106433 106432 106429 103058 103059 103060 103061 103066 103067 103062 103063 103065 107152 028000
Formwork Girders
Item no. Weight kg 103066 103067 103062 103063 103065
10,800 15,400 19,000 23,100 27,500
Props PEP 30 Prop PEP 30-150 Prop PEP 30-250 Prop PEP 30-300 Prop PEP 30-350 Prop PEP 30-400 Slab prop made of steel
D min. L max. L 66,0 960 1500 66,0 1460 2500 71,5 1710 3000 75,5 1960 3500 84,0 2210 4000 Note Permissible load: see PERI Design Tables.
8
Wall Formwork
PEP 10, 20, 30 Slab Props
Ø9
Ø14
Column Formwork
Ø40 80 100
min L
Slab Formwork
max L
120
8
103058 103059 103060 103061
16,100 19,600 22,900 30,600
Props PEP 20 Prop PEP 20-300 Prop PEP 20-350 Prop PEP 20-400 Prop PEP 20-500 Slab prop made of steel.
D min. L max. L 66,0 1710 3000 71,5 1960 3500 75,5 2210 4000 84,0 2710 5000 Note Permissible load: see PERI Design Tables.
6
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
D
Ø9
Ø14
Ø40 80 100
Plywood, SystemIndependent Accessories
min L
max L
Bridge- and Tunnel Formwork
120
Service
6
D
360
Formwork Girders
PEP 10, 20, 30 Slab Props Item no. Weight kg X 625 750 1000 1200 1375 1500
Wall Formwork
L 723 848 1098 1298 1473 1598
Column Formwork
PEP Frames PRK, Steel PEP Frames PRK 62,5 PEP Frames PRK 75 PEP Frames PRK 100 PEP Frames PRK 120 PEP Frames PRK 137,5 PEP Frames PRK 150 Stifffening frame for PEP slab props. Complete with captive wedge coupling.
Climbing Systems
Shoring Systems
X 1800 2000 2015 2100 2250 2300 2660 2960
X L
Scaffolding, Stairs, Working Platforms
L 1098 2098 2113 2198 2348 2398 2758 3058
Bridge- and Tunnel Formwork
PEP Frames PRK PEP Frames PRK 180 PEP Frames PRK 200 PEP Frames PRK 201,5 PEP Frames PRK 210 PEP Frames PRK 225 PEP Frames PRK 230 PEP Frames PRK 266 PEP Frames PRK 296 Stifffening frame for PEP slab props. Complete with captive wedge coupling.
Plywood, SystemIndependent Accessories
14,700 15,300 15,400 15,600 16,200 16,300 17,700 18,600
500
115980 112718 111815 112788 111816 111817 111818 111819
Slab Formwork
X L
361
Service
13,700 13,900 15,900 17,800 19,200 20,100
500
111811 111812 112813 112814 111813 111814
Item no. Weight kg 027940 1,840
Brace Clamp, galv. For assembly of 3 x 15 cm stiffening boards on slab props Ø 48 - 76 mm.
186
Wall Formwork
Formwork Girders
PEP 10, 20, 30 Slab Props
210
40
106434 106433 106432 106429
10,100 11,500 13,400 14,900
Props PEP 10 Prop PEP 10-250 A Prop PEP 10-300 A Prop PEP 10-350 A Prop PEP 10-400 A Lightweight slab prop made of steel.
min. L max. L 1470 2500 1720 3000 1970 3500 2220 4000 Note Permissible load: see PERI Design Tables. 7
Slab Formwork
Column Formwork
400
Ø5
Shoring Systems
Ø14
Ø30 80
7
Ø40
106989
Service
1,430
Crosshead PEP 10 / VT 20, galv. For stable support for single or twin VT 20 Girders. With self-locking coupling. 253
161
180
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
min L
Climbing Systems
max L
120
362
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Tripod PEP 10 Erection aid for PEP 10 Slab Props with with Ø 44 - 64 mm.
363
Service
Item no. Weight kg 107152 5,810
639
PEP 10, 20, 30 Slab Props
Service
364
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
ST 100 Stacking Tower
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
366 369 367 368 370 366 369 369 367 367 368 369 370 370 370 370 370 370 370 370 368 366 370 371 368
Plywood, SystemIndependent Accessories
Base-Head Frame ST 100, galv. Connector ST 100, galv. Cross Forkhead TR 38-70/50 Cross Strap, galv. Cutting Cost Scaffold Tube Diagonal Strut ST 100, galv. End Frame ST 100, galv. End Waler ST 100, galv. Head Spindle TR 38 -70/50, galv. Head Spindle TR 38-70/50 Heavy Duty Adj. Base Plate TR 38-70/50 Industrial Deck UDI 25 x 100 Pallet ST 100/2, galv. Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Spindle Safety Strap ST 100, galv. Stacking Frame ST 100, galv. Standard Coupler NK 48/48, galv. Swivel Coupling DK 48/48, galv. Tension Strap 16-25, galv.
365
Service
019900 019810 019950 018300 026417 019940 019930 019920 019790 116081 019780 106092 065050 026411 026412 026413 026414 026419 026418 026415 019800 019910 017020 017010 028590
Item no. Weight kg 019900 16,600
Base-Head Frame ST 100, galv. Base and head frame for the ST 100 Stacking Tower.
Wall Formwork
450
Ø48,3 125
125
Slab Formwork
1000
Column Formwork
80
Ø22
330
Formwork Girders
ST 100 Stacking Tower
019910
6,820
Stacking Frame ST 100, galv. Frame for Stacking Tower ST 100. 4 pieces per ascending metre.
738
500
Ø22
250
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
250
Ø48,3
Climbing Systems
Shoring Systems
1000
125
125 1000
019940
2,290
Diagonal Strut ST 100, galv. Diagonals for Stacking Tower ST 100. Number required depends on the static system.
Service
Plywood, SystemIndependent Accessories
1300 1250 Ø34
366
Formwork Girders
ST 100 Stacking Tower Note With captive Quick Jack Nut.
Wall Formwork
240 170
Head Spindle TR 38 -70/50, galv. Maximum inclination of the head plate on all sides 4.4%.
Note With captive Quick Jack Nut. As of 01.07.2009, only available as rentable item. 37,5
85
37,5
50
170
Shoring Systems
6,360
Ø13
110 80
717
Ø19 Ø14 Ø10
160
min 51
max 535
190
Ø21
38
6,950
Head Spindle TR 38-70/50 Maximum inclination of the head plate on all sides 4.4%.
Note With locking device and captive Quick Jack Nut.
37,5
80
170
85
37,5
Ø10 240
max 535
80 76 Ø19
687
Ø14
160
min 60
Bridge- and Tunnel Formwork
116081
Ø 38
028590 018300
0,568 0,564
Climbing Systems
019790
Accessories Tension Strap 16-25, galv.
Scaffolding, Stairs, Working Platforms
0,568
Ø10
Accessories Tension Strap 16-25, galv. Cross Strap, galv.
367
Service
028590
Column Formwork
38
Slab Formwork
85
710
min 47
max 535
195
Ø6,5
Plywood, SystemIndependent Accessories
Cross Forkhead TR 38-70/50 Tilt-resistant head spindle for holding one or two GT 24 or VT 20 girders.
155
Item no. Weight kg 019950 7,690
Formwork Girders
ST 100 Stacking Tower Item no. Weight kg 019780 5,160
Heavy Duty Adj. Base Plate TR 38-70/50 For heavily loaded shoring.
Note With captive Quick Jack Nut. 38
Wall Formwork
140 80
710
max 535
110 Ø19
min 47
Ø21 Ø10
Column Formwork
Ø14
0,568
Slab Formwork
028590
Tension Strap 16-25, galv. For mounting 2 GT 24 or VT 20 girders on the Crosshead Spindle and Adjustable Crosshead Spindle TR 38.
Note Wrench size SW 19.
110
Shoring Systems
270
210
SW 19
Cross Strap, galv. For fixing Steel Walers SRZ and SRU on the Adjustable Crosshead Spindle TR 38.
50
0,564
Climbing Systems
018300
Ø20
10
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
150
018350
0,310
019800
0,063
Accessories Bolt ISO 4016 M16 x 160-4.6 MU, galv. Spindle Safety Strap ST 100, galv. To prevent spindles from falling out during moving with the crane.
Service
154
Plywood, SystemIndependent Accessories
Ø 71
368
Formwork Girders
ST 100 Stacking Tower
Wall Formwork
62
End Waler ST 100, galv. For bracing the End Frame ST 100. 2 pieces at the top and bottom.
208
Item no. Weight kg 019920 6,180
Column Formwork
90
1000
End Frame ST 100, galv. As replacement for the Base Frame ST 100. In combination with End Waler ST 100. 2 per waler line.
Slab Formwork
5,260
450
Ø22
250
Ø48,3
125
Shoring Systems
330
80
019930
125 1000
1,010
Connector ST 100, galv. For connecting the ST 100 with additional frames. Required with large load concentrations. 2 pieces per frame and vertical metre. 250
Climbing Systems
019810
30
Scaffolding, Stairs, Working Platforms
112
Ø10
perm. p [kN/m²] 10,0
369
Service
Plywood, SystemIndependent Accessories
1000
60
Industrial Deck UDI 25 x 100 Mounted on Ledger UH.
96
6,960
245
106092
Bridge- and Tunnel Formwork
307
300
Column Formwork
2280 2400
900
Slab Formwork Shoring Systems Climbing Systems
970
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
400
Pallet ST 100/2, galv. For stacking and transportation of ST 100 Stacking Tower components. Capacity: 84 stacking frames + base and head spindles + diagonals.
700
Item no. Weight kg 065050 124,000
Wall Formwork
Formwork Girders
ST 100 Stacking Tower
1020
026415 026417 026411 026412 026413 026414 026419 026418
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0
L
m m m m m m
1000 2000 3000 4000 5000 6000
L
Service
1,120
Standard Coupler NK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
(9)
017020
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Ø48,3x3,2
SW 19
370
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
SW 19
Wall Formwork
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Formwork Girders
Note Wrench size SW 19.
371
Service
Item no. Weight kg 017010 1,400
(27)
ST 100 Stacking Tower
Service
372
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Slab Formwork
379 380 379 380 379 380 379 380 380 379 380 379 379 377 383 383 383 383 379 376 378 378 378 378 378 378 376 378 378 378 378
Climbing Systems
Ledger UH 200 Ledger UH 25 Ledger UH 25 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 400 Ledger UH 50 Ledger UH 50 Ledger UH 75 Ledger UH 75 Locking Pin Ø 48 Section Spindle UJK 38-110/41 Shoring Brace UBS 150/100 Shoring Brace UBS 150/150 Shoring Brace UBS 200/100 Shoring Brace UBS 200/150 Spigot ULT 32 Spindle Head SRU Standard UVR 100 Standard UVR 150 Standard UVR 200 Standard UVR 300 Standard UVR 400 Standard UVR 50 Tension Strap 16-25, galv. Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 250
Scaffolding, Stairs, Working Platforms
114645 104780 114613 100025 114648 100027 114651 100029 104779 114595 100017 114629 111053 111072 107801 107810 115504 115291 100301 109630 101306 102860 100009 100012 100013 102859 028590 100000 100003 100005 100007
Bridge- and Tunnel Formwork
374 374 374 377 375 376 377 377 375 375 374 379 382 382 382 382 382 382 382 382 382 382 383 383 383 383 383 383 383 383 382 382 382 382 382 382 382 382 382 382 382 382 381 381 381 381 381 381 381 381 381 381 381 381 381 381 381 381 381 381 380 379 380 379 380 379 380
Plywood, SystemIndependent Accessories
Adj. Base Plate UJB 38-50/30 Adj. Base Plate UJB 38-80/55 Base Plate UJP Base Standard UVB 24 Cross Forkhead TR 38-70/50 Cross Strap, galv. Handle Lock UJS Head Spindle Locking Device UJH Head Spindle TR 38 -70/50, galv. Head Spindle TR 38-70/50 Heavy Duty Adj. Base Plate TR 38-70/50 Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Horizontal Brace UBH 150/150 Horizontal Brace UBH 200/150 Horizontal Brace UBH 200/200 Horizontal Brace UBH 250/150 Horizontal Brace UBH 250/200 Horizontal Brace UBH 250/250 Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/200 Horizontal Brace UBH 300/250 Horizontal Brace UBH 300/300 Industrial Deck UDI 25 x 100 Industrial Deck UDI 25 x 125 Industrial Deck UDI 25 x 150 Industrial Deck UDI 25 x 200 Industrial Deck UDI 25 x 250 Industrial Deck UDI 25 x 300 Industrial Deck UDI 25 x 50 Industrial Deck UDI 25 x 75 Ledger Brace UBH Flex 250/250 Ledger Brace UBH Flex 100/100 Ledger Brace UBH Flex 150/100 Ledger Brace UBH Flex 150/150 Ledger Brace UBH Flex 200/100 Ledger Brace UBH Flex 200/200 Ledger Brace UBH Flex 250/100 Ledger Brace UBH Flex 250/200 Ledger Brace UBH Flex 300/100 Ledger Brace UBH Flex 300/200 Ledger Brace UBH Flex 300/250 Ledger Brace UBH Flex 300/300 Ledger Brace UBL 100/150 Ledger Brace UBL 100/200 Ledger Brace UBL 100/50 Ledger Brace UBL 150/100 Ledger Brace UBL 150/150 Ledger Brace UBL 150/200 Ledger Brace UBL 150/50 Ledger Brace UBL 200/100 Ledger Brace UBL 200/150 Ledger Brace UBL 200/200 Ledger Brace UBL 200/50 Ledger Brace UBL 250/100 Ledger Brace UBL 250/150 Ledger Brace UBL 250/200 Ledger Brace UBL 300/100 Ledger Brace UBL 300/150 Ledger Brace UBL 300/200 Ledger Brace UBL 300/50 Ledger UH 100 Ledger UH 100 Ledger UH 125 Ledger UH 125 Ledger UH 150 Ledger UH 150 Ledger UH 200
373
Service
100411 100242 100244 100014 019950 018300 100863 109563 019790 116081 019780 100719 100042 107815 100047 106931 104356 100049 100051 123483 102617 100053 106092 106880 107002 108380 108540 108689 104029 105925 114928 114818 114821 114912 114820 114916 114819 114920 114892 114924 114932 114936 115513 115157 115156 100055 102846 100057 107867 100059 102862 100061 104391 100063 102861 100065 100067 104766 100069 104762 101159 114632 110347 114638 100021 114641 100023
Shoring Systems
PERI UP Rosett Shoring
Formwork Girders
PERI UP Rosett Shoring Item no. Weight kg 100244 1,230
Base Plate UJP Without height adjustment. 31,8
3,330
100
150
150 100
30
Slab Formwork
505
Ø10
Ø17
Adj. Base Plate UJB 38-80/55 With captive yellow quick jack nut. 38
Climbing Systems
100 Ø10
min 45
30
max 595
150
805
Shoring Systems
4,520
Ø17
Adj. Base Plate UJB 38-50/30 With captive red quick jack nut.
38
100242
Ø10
130
105
100411
min 45 max 355
Column Formwork
Wall Formwork
Ø13
Scaffolding, Stairs, Working Platforms
Ø17
019780
5,160
Heavy Duty Adj. Base Plate TR 38-70/50 For heavily loaded shoring.
Note With captive Quick Jack Nut. 38
Bridge- and Tunnel Formwork
140
Service
Plywood, SystemIndependent Accessories
min 47
710
max 535
110 80 Ø19 Ø21 Ø10 Ø14
374
Formwork Girders
PERI UP Rosett Shoring Note With captive Quick Jack Nut.
Wall Formwork
240 170
Head Spindle TR 38 -70/50, galv. Maximum inclination of the head plate on all sides 4.4%.
Note With captive Quick Jack Nut. As of 01.07.2009, only available as rentable item. 37,5
85
37,5
50
170
Shoring Systems
6,360
Ø13
110 80
717
Ø19 Ø14 Ø10
160
min 51
max 535
190
Ø21
38
6,950
Head Spindle TR 38-70/50 Maximum inclination of the head plate on all sides 4.4%.
Note With locking device and captive Quick Jack Nut.
37,5
80
170
85
37,5
Ø10 240
max 535
80 76 Ø19
687
Ø14
160
min 60
Bridge- and Tunnel Formwork
116081
Ø 38
028590 018300
0,568 0,564
Climbing Systems
019790
Accessories Tension Strap 16-25, galv.
Scaffolding, Stairs, Working Platforms
0,568
Ø10
Accessories Tension Strap 16-25, galv. Cross Strap, galv.
375
Service
028590
Column Formwork
38
Slab Formwork
85
710
min 47
max 535
195
Ø6,5
Plywood, SystemIndependent Accessories
Cross Forkhead TR 38-70/50 Tilt-resistant head spindle for holding one or two GT 24 or VT 20 girders.
155
Item no. Weight kg 019950 7,690
Item no. Weight kg 028590 0,568
Tension Strap 16-25, galv. For mounting 2 GT 24 or VT 20 girders on the Crosshead Spindle and Adjustable Crosshead Spindle TR 38.
Note Wrench size SW 19.
Wall Formwork
270
210
110
Formwork Girders
PERI UP Rosett Shoring
Column Formwork
SW 19
Cross Strap, galv. For fixing Steel Walers SRZ and SRU on the Adjustable Crosshead Spindle TR 38.
150
0,310
109630
4,150
Spindle Head SRU For connecting the shoring to Steel Walers SRU and SRZ.
Note With captive nut.
Bridge- and Tunnel Formwork
700
Scaffolding, Stairs, Working Platforms
60
376
10
Accessories Bolt ISO 4016 M16 x 160-4.6 MU, galv.
37
018350
Climbing Systems
Shoring Systems
Ø20
Plywood, SystemIndependent Accessories Service
50
0,564
Slab Formwork
018300
50
Formwork Girders
PERI UP Rosett Shoring Item no. Weight kg 111072 6,190
Section Spindle UJK 38-110/41 For erection of shoring with tower units. With captive Quick Jack Nut.
100863
1,030
Handle Lock UJS Secures the Adjustable Base Plate in the Standard when moving.
Column Formwork Slab Formwork
300
min 65
max 410
1100
Wall Formwork
38
Note Wrench size SW 19.
Shoring Systems
138
Head Spindle Locking Device UJH Secures Head Spindle and top Ledger UH in the Standard when moving.
Complete with 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Permissible load 1.8 kN.
Climbing Systems
1,460
Base Standard UVB 24 For assembly directly on the base spindle.
Plywood, SystemIndependent Accessories
377
Service
Ø11
160
Ø 48,3
470
230
2,470
120 120
100014
85
Bridge- and Tunnel Formwork
115
Scaffolding, Stairs, Working Platforms
198
109563
70
67
SW 19
Item no. Weight kg 102859 101306 102860 100009 100012 100013
3,080 5,380 7,690 9,990 14,700 19,200
Standards UVR Standard UVR 50 Standard UVR 100 Standard UVR 150 Standard UVR 200 Standard UVR 300 Standard UVR 400
L 500 1000 1500 2000 3000 4000
L
Slab Formwork
N x 500
Column Formwork
120
Ø13
160
380 Ø11
4,610 6,920 9,230 11,500
Top Standard UVH Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 250 Without pins for supporting head spindles.
L 1000 1500 2000 2500
120
100000 100003 100005 100007
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
380
L
500
Ø 48,3
Ø11
378
160
Climbing Systems
Shoring Systems
Ø 48,3
Plywood, SystemIndependent Accessories Service
160
Formwork Girders Wall Formwork
PERI UP Rosett Shoring
Formwork Girders
PERI UP Rosett Shoring
Ø38
Column Formwork
0,059
Locking Pin Ø 48 As tension-proof connection of standards. Ø10
49
100719
0,060
Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. As tension-proof connection of standards for suspended scaffold or lattice girders.
Slab Formwork
111053
Accessories Locking Pin Ø 48 Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv.
25
Shoring Systems
0,059 0,060
68
111053 100719
Wall Formwork
Spigot ULT 32 Lose pin for connecting scaffold tubes Ø 48.3 mm, e.g. top standards and lattice girders.
320
Item no. Weight kg 100301 1,020
Note Wrench size SW 16.
70
Climbing Systems
SW 16 M10
Sticker
Scaffolding, Stairs, Working Platforms
X 250 500 750 1000 1250 1500 2000 2500
White White
White Red
Bridge- and Tunnel Formwork
L 204 454 704 954 1204 1454 1954 2454
Note Longitudinally-stamped with coloured label for easier identification.
Ø22
Plywood, SystemIndependent Accessories
X L
125
125
379
Service
Ledgers UH (as of 01.07.2009) Ledger UH 25 Ledger UH 50 Ledger UH 75 Ledger UH 100 Ledger UH 125 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
60
1,440 2,080 2,760 4,490 5,450 4,730 6,060 7,380 8,700 11,400
30
114613 114595 114629 114632 114638 114641 114645 114648 114651 114654
104780 104779 100017 101159 110347 100021 100023 100025 100027 100029
Ledgers UH (to 30.06.2009) Ledger UH 25 Ledger UH 50 Ledger UH 75 Ledger UH 100 Ledger UH 125 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
L X Sticker 204 250 454 500 704 750 White 954 1000 White 1204 1250 1454 1500 1954 2000 White 2454 2500 Red 2954 3000 Black 3954 4000 Note As of 01.07.2009, only available as rentable item. Longitudinally-stamped with coloured label for easier identification.
Slab Formwork
X L
Ø22
125
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
30
125
Plywood, SystemIndependent Accessories Service
1,390 2,040 2,710 3,370 4,020 4,690 6,020 7,340 8,670 11,300
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
PERI UP Rosett Shoring
380
Formwork Girders Wall Formwork Shoring Systems
L X Y Sticker 901 1000 500 1677 1000 1500 2136 1000 2000 1347 1500 500 1601 1500 1000 1953 1500 1500 2358 1500 2000 1820 2000 500 2016 2000 1000 2305 2000 1500 2658 2000 2000 White 2462 2500 1000 2705 2500 1500 3010 2500 2000 Red 2795 3000 500 2926 3000 1000 3133 3000 1500 3400 3000 2000 Black Note Longitudinally-stamped with coloured label for easier identification. UBL 150/250 identical to UBL 300/50, UBL 250/50 identical to UBL 200/150, UBL 100/100 identical to Diagonal Strut ST 100 (Art.-Nr. 019940). 25
L 25
Ø42,4 25
Climbing Systems
L
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
X
Plywood, SystemIndependent Accessories
Ledger Braces UBL Ledger Brace UBL 100/50 Ledger Brace UBL 100/150 Ledger Brace UBL 100/200 Ledger Brace UBL 150/50 Ledger Brace UBL 150/100 Ledger Brace UBL 150/150 Ledger Brace UBL 150/200 Ledger Brace UBL 200/50 Ledger Brace UBL 200/100 Ledger Brace UBL 200/150 Ledger Brace UBL 200/200 Ledger Brace UBL 250/100 Ledger Brace UBL 250/150 Ledger Brace UBL 250/200 Ledger Brace UBL 300/50 Ledger Brace UBL 300/100 Ledger Brace UBL 300/150 Ledger Brace UBL 300/200 Mounted in the holes of the ledger.
381
Service
2,670 4,650 5,820 3,800 4,450 5,350 6,390 5,010 5,510 6,250 7,160 6,650 7,270 8,050 7,500 7,840 8,370 9,050
Y
115156 115513 115157 107867 100055 102846 100057 104391 100059 102862 100061 100063 102861 100065 104762 100067 104766 100069
Column Formwork
Item no. Weight kg
Slab Formwork
PERI UP Rosett Shoring
Formwork Girders
Item no. Weight kg 100042 107815 100047 106931 104356 100049 100051 123483 102617 100053
7,350 8,700 9,870 10,200 11,300 12,400 11,800 12,700 13,800 15,000
Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal
Braces UBH Brace UBH 150/150 Brace UBH 200/150 Brace UBH 200/200 Brace UBH 250/150 Brace UBH 250/200 Brace UBH 250/250 Brace UBH 300/150 Brace UBH 300/200 Brace UBH 300/250 Brace UBH 300/300
Column Formwork
Wall Formwork
PERI UP Rosett Shoring L 2042 2422 2749 2839 3123 3456 3279 3528 3826 4164
X 1500 2000 2000 2500 2500 2500 3000 3000 3000 3000
Y 1500 1500 2000 1500 2000 2500 1500 2000 2500 3000
7
L 10
Slab Formwork
Y
L
Ø48,3
10
114818 114821 114912 114820 114916 114819 114920 114928 114892 114924 114932 114936
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
X
4,580 5,720 6,650 7,000 8,730 8,350 9,830 10,800 9,730 11,000 11,900 12,900
Ledger Brace UBH-Flex Ledger Brace UBH Flex 100/100 Ledger Brace UBH Flex 150/100 Ledger Brace UBH Flex 150/150 Ledger Brace UBH Flex 200/100 Ledger Brace UBH Flex 200/200 Ledger Brace UBH Flex 250/100 Ledger Brace UBH Flex 250/200 Ledger Brace UBH Flex 250/250 Ledger Brace UBH Flex 300/100 Ledger Brace UBH Flex 300/200 Ledger Brace UBH Flex 300/250 Ledger Brace UBH Flex 300/300 For horizontal bracing of towers underneath the decking.
L 1335 1725 2042 2161 2749 2620 3123 3456 3092 3528 3826 4163
X 1000 1500 1500 2000 2000 2500 2500 2500 3000 3000 3000 3000
Y 1000 1000 1500 1000 2000 1000 2000 2500 1000 2000 2500 3000
10
L 7
Y
Bridge- and Tunnel Formwork
L
Ø50
Service
Plywood, SystemIndependent Accessories
7
X
382
Formwork Girders
PERI UP Rosett Shoring Item no. Weight kg Shoring Braces UBS Shoring Brace UBS 150/100 Shoring Brace UBS 150/150 Shoring Brace UBS 200/100 Shoring Brace UBS 200/150 Standard brace for shoring towers.
L 1792 2122 2219 2492
X 1500 1500 2000 2000
Y 1000 1500 1000 1500
Wall Formwork
5,260 6,060 6,360 7,050
Y
L
Ø42,4
Column Formwork
107801 107810 115504 115291
Shoring Systems
perm. p [kN/m²] 10,0 10,0 10,0 10,0 10,0 10,0 7,5 5,0
Climbing Systems
X
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
X 500 750 1000 1250 1500 2000 2500 3000
383
Service
50 75 100 125 150 200 250 300
60
Industrial Decks UDI 25 Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Industrial Deck UDI 25 x Mounted on Ledger UH.
96
4,100 5,530 6,960 8,390 9,800 12,700 15,500 18,400
245
104029 105925 106092 106880 107002 108380 108540 108689
Slab Formwork
X
Service
384
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
HD 200 Heavy Duty Prop
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
388 390 388 392 388 389 389 389 386 394 392 393 390 387 393 393 394 394 393 394 394 387 392 391 391 391 386 386 386 386 386 394 394 394 394 394 394 394 390 387 395 392 395 392 388 387
Plywood, SystemIndependent Accessories
Base Adapter HD Base Plate HD Brace Connector HDR Centring Bar 40 x 20 x 400 mm Centring Bolt HD M12, galv. Compression Brace Spindle HD Compression Head HD Connector Kicker/Push-Pull Prop, galv. Coupling Section HD30 Cutting Cost Scaffold Tube Double Anchor Tie Yoke HDD End Ladder 180/2, galv. Guardrail Post HSGP Head Spindle HDK45 Height Compensation HD, h = 200 mm Ladder 180/6, galv. Ladder Base, galv. Ladder Connector HD 200 Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Lowering Device HDA Main Beam Clamp HD 70 mm, galv. Main Beam HDT 280 Main Beam HDT 440 Main Beam HDT 880 Prop Section HDS 270 Alu Prop Section HDS 30 Alu Prop Section HDS 90 Alu Prop section HDSS 210 Steel Prop Section HDSS 90 Steel Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaffold Bracket HD 75 Shear Pin HDA Standard Coupler NK 48/48, galv. Steel Beam Clamp IPB 300 - 1000 Swivel Coupling DK 48/48, galv. Trolley HD Wedge Lowering Device 420 kN Wing Nut Spanner HD
385
Service
022019 022024 022016 022025 022013 022023 022022 028080 022020 026417 022011 103724 034580 022007 101916 051410 051460 104646 103718 051450 104132 022003 106183 022010 022009 022008 022004 022006 022005 103993 111276 026411 026412 026413 026414 026419 026418 026415 022017 022018 017020 022026 017010 022021 024590 022027
Formwork Girders
Item no. Weight kg 022006 022005 022004 111276 103993
5,310 11,200 29,700 28,200 63,500
Prop Section HDS / HDSS Prop Section HDS 30 Alu Prop Section HDS 90 Alu Prop Section HDS 270 Alu Prop Section HDSS 90 Steel Prop section HDSS 210 Steel Prop sections made of aluminium or steel. With chord couplings for connecting to other sections.
L X 340 300 940 900 2740 2700 940 900 2140 2100 Note A maximum 2 x HDS 30 Alu may be used with the steel prop sections!
X L
Slab Formwork
Column Formwork
Wall Formwork
HD 200 Heavy Duty Prop
243
Climbing Systems
022020
3,310
Coupling Section HD30 Prop sections made of aluminium or steel. With chord couplings for connecting to other sections.
273
225
Shoring Systems
Ø 48
Note A maximum 2 x HDS 30 Alu may be used with the steel prop sections! 243
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
386
273
225
290
Scaffolding, Stairs, Working Platforms
Ø 48
Formwork Girders
HD 200 Heavy Duty Prop
Wall Formwork
Note Always install spindled out. Do not use impact wrench due to Shear Pin HDA, Item no. 022018 breaking!
250
Slab Formwork Shoring Systems
Head Spindle HDK45 Head spindle for heavy-duty prop HD 200. With integrated chord couplings for connecting the chord tubes. Can be tilted up to 3° along one axis.
Note Loads > 60 kN are not removable with the Head Spindle HDK 45!
666
min 410
360
Ø13
50
120
50 55
330
022027
4,230
Accessories Wing Nut Spanner HD Bridge- and Tunnel Formwork
4,230
Wing Nut Spanner HD For easy release of the Head Spindle HDK 45 and MULTIPROP slab props. 985
Plywood, SystemIndependent Accessories
022027
Climbing Systems
25,700
Scaffolding, Stairs, Working Platforms
022007
Shear Pin HDA For mounting in the Lowering Device HDA.
Ø48
387
Service
0,002
220
022018
Accessories Shear Pin HDA
180
0,002
300
max 860
022018
Column Formwork
min 242
453
Lowering Device HDA For easy release of higher loads with the HD 200. Lowering range max. 10 cm. Tiltable on all sides up to 3°.
max 344
Item no. Weight kg 022003 31,400
Item no. Weight kg 024590 32,000
Wedge Lowering Device 420 kN For releasing and lowering large loads.
Wall Formwork
Formwork Girders
HD 200 Heavy Duty Prop Note Take type test into consideration. Wrench size SW 46. Technical Data Bearing capacity 420 kN. 230
Column Formwork
min 168 max 268
260
022013
0,137
Centring Bolt HD M12, galv. For the HD 200 system.
35
80
Slab Formwork
SW 19
M 12
022019
18,500
Base Adapter HD For using HD 200 Prop Sections on the Wedge Lowering Device 420 kN. With removable centring.
325
Climbing Systems
Shoring Systems
Complete with 1 pc. 710330 Nut ISO 4032 M12-8, galv.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
75
Brace Connector HDR For connecting push-pull props and kicker braces to HDS and HDSS Prop Sections.
14
Plywood, SystemIndependent Accessories Service
1,300
130
171
022016
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
295
388
Ø16x42
60
Connector Kicker/Push-Pull Prop, galv. For connecting push-pull props and kicker braces to Main Beam HDT.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Technical Data Permissible tension force 14,9 kN under 30°. Permissible compressive force 31,6 kN under 30°.
100
Column Formwork
200
12
85
Ø25
Formwork Girders
Item no. Weight kg 028080 2,970
Wall Formwork
HD 200 Heavy Duty Prop
295
Ø36
Scaffolding, Stairs, Working Platforms
Compression Head HD For using Prop Sections HDS and HDSS as props (also inclined). 295
325
110
225
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
389
Service
22,000
125
022022
Climbing Systems
265
min 523
Shoring Systems
Slab Formwork
Compression Brace Spindle HD For using Prop Sections HDS and HDSS as props (also inclined). Only in connection with Base Plate HD!
max 990
22,200
870
022023
Formwork Girders
HD 200 Heavy Duty Prop Item no. Weight kg 022024 13,200
Base Plate HD For using Prop Sections HDS and HDSS as props (also inclined).
Complete with 1 pc. 722465 Bolt 35 x 160, galv. 1 pc. 710304 Cotter Pin 7, galv.
175
Wall Formwork
Ø52 Ø36 300 400 Ø26 Ø22
120
Column Formwork
Ø32
5,040
Scaffold Bracket HD 75 For assembly of working scaffold. With nailing batten.
Slab Formwork
022017
Complete with 1 pc. 034580 Guardrail Post HSGP Technical Data Permissible load 150 kg/m2 with maximum width of influence 1.25 m.
034580
3,520
034580
3,520
Accessories Guardrail Post HSGP Guardrail Post HSGP As guardrail for different systems.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
65
390
35
1300
1050
440
120
Scaffolding, Stairs, Working Platforms
Climbing Systems
100
370
Shoring Systems
855
Formwork Girders
HD 200 Heavy Duty Prop
Wall Formwork
Complete with 1 pc. 105435 Bolt Ø 50 x 330, galv. 1 pc. 722457 Sleeve ISO 8752-10 x 70, galv. 1 pc. 710618 Cotter Pin 8, galv. Technical Data Wy = 1680.0 cm³, Iy = 25170 cm4 8980 3200
3200
1095
100
300
250 950
195 Ø25
582,000
Main Beam HDT 440 System steel girder for use with HD 200 main beam areas and special constructions. Profile HEB 300.
Complete with 1 pc. 105435 Bolt Ø 50 x 330, galv. 1 pc. 722457 Sleeve ISO 8752-10 x 70, galv. 1 pc. 710618 Cotter Pin 8, galv. Technical Data Wy = 1680.0 cm³, Iy = 25170 cm4
Shoring Systems
022009
Slab Formwork
21 x 400 = 8400
120
200
Column Formwork
105
8800
300
100
4580 950
2000
1095
100
300
250
Ø25
Complete with 1 pc. 105435 Bolt Ø 50 x 330, galv. 1 pc. 722457 Sleeve ISO 8752-10 x 70, galv. 1 pc. 710618 Cotter Pin 8, galv. Technical Data Wy = 1680.0 cm³, Iy = 25170 cm4 2980 250
1150
1295
100
200
100
2800
6 x 400 = 2400 Ø25
195
Plywood, SystemIndependent Accessories
Main Beam HDT 280 System steel girder for use with HD 200 main beam areas and special constructions. Profile HEB 300.
120
379,000
300
022010
195
Scaffolding, Stairs, Working Platforms
10 x 400 = 4000
120
200
Climbing Systems
105
4400
300
100
Bridge- and Tunnel Formwork
Main Beam HDT 880 System steel girder for use with HD 200 main beam areas and special constructions. Profile HEB 300.
105
391
Service
Item no. Weight kg 022008 1130,000
Centring Bar 40 x 20 x 400 mm For centring crossbeams on the Main Beam HDT.
400
Column Formwork
022011
13,200
Double Anchor Tie Yoke HDD For anchoring with Tie Rod DW 15 and DW 20.
40
20
Item no. Weight kg 022025 1,970
Wall Formwork
Formwork Girders
HD 200 Heavy Duty Prop
Technical Data Permissible load 2 x 50 kN. 600 500 161
022021
31,900
Trolley HD For moving longitudinal girders on the Main Beam HDT.
80 157
663
Technical Data Bearing capacity 2.5 t.
2,200
Main Beam Clamp HD 70 mm, galv. For connecting crossed girders.
410
1,780
130
392
50
Steel Beam Clamp IPB 300 - 1000 For providing protection against tipping. 70
022026
37
54
22
Plywood, SystemIndependent Accessories
320
Safety Instructions Take official approval into consideration!
150
Service
800 1043
16-70
106183
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Ø 60
Ø25
Ø25 72 88
Formwork Girders
HD 200 Heavy Duty Prop Height Compensation HD, h = 200 mm For height compensations of 200 mm.
051410
11,700
Column Formwork
0,334 0,100
300
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Nut ISO 4032 M24-8, galv. Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
026430 022250
Wall Formwork
200
295
120
200
190
Ø25
5 x 298 = 1490
Slab Formwork
Item no. Weight kg 101916 22,500
83
Shoring Systems
1960
End Ladder 180/2, galv. As access for PERI formwork systems.
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
10,400
SW 18
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
103724
Climbing Systems
Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Wrench size SW 18.
298
1200 1885
393
Plywood, SystemIndependent Accessories
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
Service
0,684
330
103718
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210
Item no. Weight kg 051460 2,180
405
104646
4,170
Ladder Connector HD 200 For connecting ladders to HD 200 prop sections.
Shoring Systems
50
Complete with 2 pc. 701763 Clamping Plate Fl 25 x 10 x 90 1 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 725
230
178
626
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
HD 200 Heavy Duty Prop
468
104132 051450
15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90
Service
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0
704
750 / 1500
026415 026417 026411 026412 026413 026414 026419 026418
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
710
L
m m m m m m
1000 2000 3000 4000 5000 6000
L Ø48,3x3,2
394
Formwork Girders
HD 200 Heavy Duty Prop Note Wrench size SW 19.
Wall Formwork
SW 19
Column Formwork
Note Wrench size SW 19.
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
SW 19
Bridge- and Tunnel Formwork
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Plywood, SystemIndependent Accessories
1,400
(27)
017010
395
Service
Standard Coupler NK 48/48, galv. For Scaffold Tubes Ø 48 mm.
(9)
Item no. Weight kg 017020 1,120
Service
396
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
FB 180 Folding Platform System
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
408 410 409 408 408 406 407 406 405 401 407 402 405 405 402 401 400 400 399 398 403 402 405 399 409 409 406 403 407 403 407 407 404 410 401 405 404 408 405 405 404 406
Plywood, SystemIndependent Accessories
Advancing Screw M24, galv. Allan Key SW 14, long Anchor Loop Anchor Positioning Plate M24, galv. Anchor Positioning Stud M 24, galv. Anchor Sleeve M24 Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt Ø 16 x 150, galv. Compression Strut FB-2 Cone for Bolt Anchor Sleeve M24 Corner Frame FBE Cotter Pin 4/1, galv. Cutting Cost Tie Rod DW 15/ B 15 End Guardrail Frame 55 Finishing Platform Bracket FBN-2 Finishing Platform FBN-2/300 Folding Bracket FB 180-3, compl. Folding Corner Platform FEB 180-3/300 Folding Platform FB 180-3/300 Guardrail Extension FB Guardrail Post FBP Hex. Nut DW 15 SW 30/50, galv. Intermediate Platform FBZ 240 Loop Mounting Head-2 FB, galv. Mounting Extension ASG for Loop Mounting Head FB Pipe Bracing Connector, galv. Plug Ø 26 mm for Bolt Anchor Sleeve M24 Safety Net 6.0 x 2.0 m Scaffold Mounting Ring M24, galv. Screw on Cone-2 M24/DW 20, galv. Screw Plate DW 15/115, galv. Socket Wrench SW 36, cromatized Support Extension 300 FB-2 Tension Belt Connector Wall Tension Belt, l = 5.70 m, 25 kN Threaded Anchor Plate DW 20 Tie Rod B 15 spec. length Tie Rod B 15 l = 0.30 m Transportation Fork FB, galv. Wall Scaffold Hinge FB
397
Service
029270 027212 026636 029280 026420 026230 029560 026430 715357 026627 026240 026626 018060 030050 065066 026631 026625 026652 026649 026648 026635 026628 030070 026622 026645 026638 026632 026644 026250 026530 029470 114158 026647 031480 026624 051270 051250 030860 030740 030150 026646 026990
Item no. Weight kg 026648 318,000
Folding Platform FB 180-3/300 Work and safety scaffold according to DIN EN 12811 and DIN 4420. With continuous 45 mm thick decking and foldable handrail frame.
Technical Data Permissible load 300 kg/m2. For special applications up to 450 kg/m2.
Column Formwork
Wall Formwork
Formwork Girders
FB 180 Folding Platform System
240
2500
240
2980
Climbing Systems
2055
Shoring Systems
1040
Slab Formwork
Ø48,3
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
2000
398
Formwork Girders
FB 180 Folding Platform System Technical Data Permissible load 300 kg/m2.
Wall Formwork
Folding Corner Platform FEB 180-3/300 Corner platform which can be used on the left and right. Assembled from folding platform and Corner Frame FBE.
2500
240
2056
240
Column Formwork
1040
Item no. Weight kg 026649 478,000
Climbing Systems
Technical Data Permissible load 300 kg/m2.
1800
Scaffolding, Stairs, Working Platforms
2407
1641
Bridge- and Tunnel Formwork
1420 1740
Plywood, SystemIndependent Accessories
126
399
Service
Intermediate Platform FBZ 240 As intermediate platform, or with accessories used as end platform. With continuous 45 mm thick platform decking and foldable handrail frame.
1080
113,000
1030
026622
Shoring Systems
Slab Formwork
2980
Item no. Weight kg 026652 82,000
Folding Bracket FB 180-3, compl. For assembly of special platforms in connection with FBZ intermediate platforms as telescopic end platform.
Wall Formwork
Ø48,3 316
1120
2010
18 x 50 = 900
Column Formwork
385
1085
Ø9
2055
Formwork Girders
FB 180 Folding Platform System
Slab Formwork
160
Ø17
95
180
2000
18 x 80 = 1440
Shoring Systems
40
116,000
Finishing Platform FBN-2/300 With continuous 45 mm thick platform decking and foldable guardrail frame.
Technical Data Permissible load 150 kg/m2.
Scaffolding, Stairs, Working Platforms
Climbing Systems
026625
Service
Plywood, SystemIndependent Accessories
806
900
026624
400
42,300
Accessories Support Extension 300 FB-2
1260
Bridge- and Tunnel Formwork
1041
2980
Formwork Girders
FB 180 Folding Platform System Item no. Weight kg 026631 16,100
Finishing Platform Bracket FBN-2 For assembling special finishing platforms.
1085
Wall Formwork
Ø9
175
Ø48,3
170
Column Formwork
885
42,300
Support Extension 300 FB-2 For extending the bottom pressure point.
Note Adjustable from 1.30 m to 3.00 m in 10 cm increments.
Shoring Systems
3013
Scaffolding, Stairs, Working Platforms
200
Compression Strut FB-2 For use with Support Extension 300 FB-2.
Plywood, SystemIndependent Accessories
3234
152
21,200
120
180
026627
80
Bridge- and Tunnel Formwork
433
401
Service
238
Climbing Systems
175
17 x 100 = 1700
Slab Formwork
026624
Corner Frame FBE For the use of the Folding Platform FB 180-3/300 as corner platform left and right on building corners.
Complete with 6 pc. 710225 Bolt ISO 4017 M16 x 45-8.8, galv. 6 pc. 070890 Nut ISO 7042 M16-8, galv.
500
1000
Column Formwork
1928
1000
7,120
438
Guardrail Post FBP For assembly of a lateral guardrail on the FB 180. Bolted on from above. 120
026628
Shoring Systems
Slab Formwork
2400
72
90 120
065066
15,100
DW 15
End Guardrail Frame 55 Clampable end handrail for all PERI scaffold platforms and climbing systems.
Service
Plywood, SystemIndependent Accessories
max 417
Bridge- and Tunnel Formwork
1360
1020
Scaffolding, Stairs, Working Platforms
Climbing Systems
382
1005
503
Ø 48,3
560
402
400
2137
Item no. Weight kg 026626 177,000
Wall Formwork
Formwork Girders
FB 180 Folding Platform System
Formwork Girders
FB 180 Folding Platform System Pipe Bracing Connector, galv. For connecting Scaffold Tube Ø 48.3 mm to the Folding Bracket FB 180 for special platforms.
Complete with 2 pc. 710225 Bolt ISO 4017 M16 x 45-8.8, galv. 2 pc. 070890 Nut ISO 7042 M16-8, galv.
260
100
Wall Formwork
30
Item no. Weight kg 026644 2,330
30
100
M 16x45
Column Formwork
60 159
Slab Formwork
Guardrail Extension FB For increasing the height of the guardrail up to h = 2.00 m when using the FB 180 as safety scaffold.
Shoring Systems
Ø 38
Technical Data Mains Type A2 according to DIN EN 1263-1. Energy consumption 4,2 kJ. Colour: green. Approved by the Bau-BG (Employers´ Liability Insurance Association for the building industry).
Bridge- and Tunnel Formwork
100 6000
Plywood, SystemIndependent Accessories
Safety Net 6.0 x 2.0 m Safety netting made of high-strength polypropylene for safety scaffolding. 5 mm thick, knotless.
2000
2,400
100
026530
Climbing Systems
1141
991
Ø48,3
Scaffolding, Stairs, Working Platforms
3,690
403
Service
026635
Item no. Weight kg 026646 199,000
Transportation Fork FB, galv. For moving completely assembled platform units.
Safety Instructions Load-carrying capacity 750 kg. Follow Instructions for Use at all times!
Column Formwork
Wall Formwork
Formwork Girders
FB 180 Folding Platform System
1301
Slab Formwork
2889
4589
120
1621
80 1500
1260
Shoring Systems
026647
0,673
15
Screw Plate DW 15/115, galv. For mounting and assembling TRP, FB 180 and RUNDFLEX Plus platforms.
115
100
051250
2,790
Tension Belt, l = 5.70 m, 25 kN
60
Climbing Systems
1756
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
705
Ø25x180
Technical Data Permissible tension force 25.0 kN.
Service
Plywood, SystemIndependent Accessories
1000 min 1600
404
max 5700
Formwork Girders
FB 180 Folding Platform System
Wall Formwork
Tension Belt Connector Wall To prevent tipping over due to wind loads with tension belt. Mounted on the wall or to the strut of the Bracket SKS 180.
0
Item no. Weight kg 051270 1,620
12
Ø50
80
Ø25
100
0,334
Accessories Bolt ISO 4014 M24 x 70-10.9, galv.
715357
0,243
Bolt Ø 16 x 150, galv.
Column Formwork
026430
12
Slab Formwork
150 120
018060
0,030
Ø16
Shoring Systems
Ø5
Cotter Pin 4/1, galv. For pins up to Ø 25 mm.
0,222
Hex. Nut DW 15 SW 30/50, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 30. Technical Data Permissible load 90 kN.
Scaffolding, Stairs, Working Platforms
030070
Climbing Systems
Ø4
50 SW 30
Tie Rods B 15 Tie Rod B 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod B 15 l = 0.30 m
Note Weldable! Take official approval into consideration! Technical Data Permissible load 85 kN.
Plywood, SystemIndependent Accessories
1,550 0,000 0,420
B 15
405
Service
030740 030050 030150
Bridge- and Tunnel Formwork
DW 15
Item no. Weight kg 026632 6,250
Mounting Head FB For mounting the folding platform on the Wall Scaffold Hinge FB or Scaffold Mounting Ring M24.
Column Formwork
329
Wall Formwork
46 125
35
75
25
Wall Scaffold Hinge FB For attaching the Folding Platform FB 180 with Mounting Head FB. Allows mounting point to be moved ± 2.5 cm laterally..
39
26
65
026430
0,334
026430
0,334
Climbing Systems
Shoring Systems
55
200
2,870
Slab Formwork
026990
130
70
Formwork Girders
FB 180 Folding Platform System
110 130
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36.
70
Scaffolding, Stairs, Working Platforms
SW 36
M24
026230
1,010
Anchor Sleeve M24 To anchor platform systems.
Note Permissible load: see PERI product information. 100
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
68
8
120
12 DW 20
026240 026250
406
0,026 0,005
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve
Ø 31
15
Formwork Girders
FB 180 Folding Platform System Item no. Weight kg 026240 0,026
Cone for Bolt Anchor Sleeve M24 Results in a concrete cover of 24 mm. 39
50
Plug Ø 26 mm for Bolt Anchor Sleeve M24 For closing the cone for the Anchor Sleeve M24.
Column Formwork
0,005
Ø 26
Ø 23
27
Scaffold Mounting Ring M24, galv. Tie System M24. For anchoring climbing systems.
Note Permissible load: see PERI product information.
Shoring Systems
0,723
Ø73
029470
029560
0,535
Accessories Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36.
Scaffolding, Stairs, Working Platforms
0,535
Climbing Systems
73
029560
120 M24
1,030
Screw on Cone-2 M24/DW 20, galv. Tie System M24. For anchoring climbing systems.
Bridge- and Tunnel Formwork
SW 36
114158
Slab Formwork
Ø31
026250
Wall Formwork
24
Note Permissible load see PERI product information. Wrench size SW 36.
0,801
70
Accessories Threaded Anchor Plate DW 20
407
Service
030860
Plywood, SystemIndependent Accessories
65
M 24
DW 20
150 SW 36
Item no. Weight kg 030860 0,801
Threaded Anchor Plate DW 20 For use with Tie Rod DW 20, B 20 or Screw-On Cone-2 M24/DW 20. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
Wall Formwork
65 DW 20
100
Ø6
Column Formwork
32
Formwork Girders
FB 180 Folding Platform System
0,331
Advancing Screw M24, galv. For fixing the M24 anchor system if the plywood formlining is drilled through.
Note Wrench size SW 19.
70 M 24 SW 19
029280
0,196
029280
0,196
Climbing Systems
Shoring Systems
Slab Formwork
029270
Accessories Anchor Positioning Plate M24, galv. Anchor Positioning Plate M24, galv. For fixing the M24 anchor system if the plywood formlining is drilled through.
80
Ø7
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Ø25
60
029440
0,005
026420
0,123
6
Accessories Lag Screw DIN 571 6 x 20, galv. Anchor Positioning Stud M 24, galv. For fixing the M24 anchor system if the plywood formlining is not drilled through.
Note Allen Key SW 14.
Plywood, SystemIndependent Accessories
60
SW 14 Ø5 M 24 40
Service
027212 710312
408
0,445 0,005
Accessories Allan Key SW 14, long Nail 3 x 80
Formwork Girders
FB 180 Folding Platform System
Wall Formwork
Loop Mounting Head-2 FB, galv. For mounting the Folding Platform FB 180 on the Anchor Loop.
146
146
17,800
Mounting Extension ASG for Loop For mounting the Folding Platform FB 180 in a 60 cm to 70 cm lower position
124
Note Always use in pairs. Permissible load: see PERI product information.
Bridge- and Tunnel Formwork
740 224
409
Service
Plywood, SystemIndependent Accessories
120
Anchor Loop To anchor platform systems.
80
1,140
10
026636
117
Scaffolding, Stairs, Working Platforms
200
Climbing Systems
985
Shoring Systems
700
Slab Formwork
026638
Column Formwork
375
Item no. Weight kg 026645 5,460
Item no. Weight kg 031480 2,460
Socket Wrench SW 36, cromatized For a diverse range of uses.
Column Formwork
Wall Formwork
Formwork Girders
FB 180 Folding Platform System
510
027212
0,445
Allan Key SW 14, long For unscrewing the Anchor Positioning Stud M24, M30 and M36. SW 14
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
230
410
Service
411
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
412
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
ASG 70-100 Platform System
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
418 416 417 417 417 414 416 418 417 419 415 415 418 414 414 417 418 418 416 418 415
Plywood, SystemIndependent Accessories
Allan Key SW 14, long Anchor Loop Anchor Positioning Stud M 24, galv. Anchor Sleeve M24 Bolt ISO 4014 M24 x 70-10.9, galv. Bracket ASG 70-100 Cavity Wall Bracket ASG Clip for Console Bracket ASG 70-100 Cone for Bolt Anchor Sleeve M24 F.H. Bolt DIN 603 M8 x 60 MU, galv. Guardrail Post HSGP Mounting Plate ASG Nail 3 x 80 Platform ASG 70-100/240 Platform ASG 70-100/298 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plywood board 2400 x 470 Plywood board 2980 x 470 Sleeve for Cavity Wall Bracket ASG Socket Wrench SW 36, cromatized Wall Scaffold Hinge ASG
413
Service
027212 026636 026420 026230 026430 105845 108870 105907 026240 710326 034580 026536 710312 105843 105844 026250 105842 105841 108869 031480 026531
Item no. Weight kg 105843 105844
46,400 51,300
Platforms ASG 70-100 Platform ASG 70-100/240 Platform ASG 70-100/298 Bracket platform with robust decking for tight workspaces. Telescopic. Platform width can be increased through installation of planking.
Column Formwork
Wall Formwork
Formwork Girders
ASG 70-100 Platform System Technical Data Permissible load 150 kg/m2.
200/ 240
2000 / 2500
200/ 240
2400 / 2980
min 771 max 1051 470
034580 026531
3,520 7,780
105845
12,800
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
822
Slab Formwork
146
Accessories Guardrail Post HSGP Wall Scaffold Hinge ASG Bracket ASG 70-100 As individual bracket or for special platforms with planking.
Service
Plywood, SystemIndependent Accessories
112
822
Bridge- and Tunnel Formwork
min 771 max 1051
90
034580 026531 105907
414
3,520 7,780 0,245
Accessories Guardrail Post HSGP Wall Scaffold Hinge ASG Clip for Console Bracket ASG 70-100
Formwork Girders
ASG 70-100 Platform System Guardrail Post HSGP As guardrail for different systems.
35
Column Formwork
65
1300
1050
440
Wall Formwork
120
Item no. Weight kg 034580 3,520
Slab Formwork
Wall Scaffold Hinge ASG
71
Shoring Systems
Note No use possible near external corners where brickwork is continued.
Ø22
Scaffolding, Stairs, Working Platforms
Mounting Plate ASG For subsequent formation of mounting points for ASG platforms. The wall is continued above the mounting plate, which is subsequently withdrawn from the inside. Fixing with flush-fitted, removable heavy-duty expansion bolts.
750
Bridge- and Tunnel Formwork
11,200
Plywood, SystemIndependent Accessories
026536
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Anchor Sleeve M24
80
0,334 1,010
220
026430 026230
150
Climbing Systems
180
112
240
200
Ø25
415
Service
7,780
40
026531
Item no. Weight kg 108870 6,730
Cavity Wall Bracket ASG Adapter for mounting of ASG 70-100 Platforms in pre-cast cavity walls. For use without lost parts.
Complete with 1 pc. 108869 Sleeve for Cavity Wall Bracket ASG Note The maximum live load on the ASG 70-100 Platforms is 150kg/m². The load-bearing capacity of the cavity wall must be proven separately.
98
108869
Climbing Systems
0,712
Sleeve for Cavity Wall Bracket ASG Elastic and can be re-used many times.
Note Before concreting, spray with PERI concrete release agent.
335
72
67
Scaffolding, Stairs, Working Platforms
026636
1,140
Anchor Loop To anchor platform systems.
Note Always use in pairs. Permissible load: see PERI product information. 740
80
Bridge- and Tunnel Formwork
120
10
224
Plywood, SystemIndependent Accessories Service
68
402
Shoring Systems
Slab Formwork
Column Formwork
520
Wall Formwork
Formwork Girders
ASG 70-100 Platform System
416
Item no. Weight kg 026230 1,010
Anchor Sleeve M24 To anchor platform systems.
Note Permissible load: see PERI product information.
Formwork Girders
ASG 70-100 Platform System
100 8
120
Wall Formwork
68
15
Ø 31
12
026240 026250
0,026 0,005
026240
0,026
Column Formwork
DW 20
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve Cone for Bolt Anchor Sleeve M24 Results in a concrete cover of 24 mm.
Slab Formwork
39
026250
0,005
Shoring Systems
Ø31
50
24
Plug Ø 26 mm for Bolt Anchor Sleeve M24 For closing the cone for the Anchor Sleeve M24.
0,334
Bolt ISO 4014 M24 x 70-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36.
Scaffolding, Stairs, Working Platforms
026430
Climbing Systems
Ø 26
Ø 23
27
70
SW 36
026420
0,123
Anchor Positioning Stud M 24, galv. For fixing the M24 anchor system if the plywood formlining is not drilled through.
Bridge- and Tunnel Formwork
M24
Note Allen Key SW 14.
Plywood, SystemIndependent Accessories
60
SW 14 Ø5 M 24 40
0,445 0,005
Accessories Allan Key SW 14, long Nail 3 x 80
417
Service
027212 710312
Formwork Girders
ASG 70-100 Platform System Item no. Weight kg 710312 0,005
Nail 3 x 80
80
Column Formwork
Wall Formwork
Ø3
031480
2,460
Socket Wrench SW 36, cromatized For a diverse range of uses.
027212
0,445
Allan Key SW 14, long For unscrewing the Anchor Positioning Stud M24, M30 and M36. SW 14
230
105842 105841
19,600 24,500
Plywood boards Plywood board 2400 x 470 Plywood board 2980 x 470
Service
2400 / 2980
0,245
Clip for Console Bracket ASG 70-100
57
710326
418
0,030
39
124
Accessories F.H. Bolt DIN 603 M8 x 60 MU, galv.
50
105907
61
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
470
Climbing Systems
Shoring Systems
Slab Formwork
510
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
22
Plywood, SystemIndependent Accessories
M8
SW 13
Wall Formwork
Item no. Weight kg 710326 0,030
Formwork Girders
F.H. Bolt DIN 603 M8 x 60 MU, galv. With hex. nut.
419
Service
ASG 70-100 Platform System
60
Service
420
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Shoring Systems
433 433 430 431 437 438 439 424 424 430 426 426 427 427 433 434 434 434 441 434 426 426 441
Climbing Systems
Scaffold Mounting Ring M24, galv. Screw on Cone-2 M24/DW 20, galv. Screw-On Coupler AK 48, galv. Side Guardrail Post Sliding Hatch Cover Socket Wrench SW 36, cromatized Spacer for Platform Beam BR Strongback CB 270 Strongback CB 380 Swivel Coupling DK 48/48, galv. Tension Anchor Connector CB Tension Belt Connector CB Tension Belt Connector Wall Tension Belt, l = 5.70 m, 25 kN Threaded Anchor Plate DW 20 Threaded Plate DW 15 Tie Rod B 15 l = 0.30 m Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod DW 15 spec. length Waler Fixation U100-U120 Wall Tension Anchor Wingnut Pivot Plate DW 15, galv.
Scaffolding, Stairs, Working Platforms
029470 114158 017040 051610 051430 031480 020620 051060 051150 017010 107007 051260 051270 051250 030860 030840 030150 030740 030740 030030 110059 107008 030370
Bridge- and Tunnel Formwork
425 424 435 438 435 435 441 440 433 427 442 422 423 422 434 442 425 439 423 430 434 441 434 432 432 432 432 432 427 440 439 430 429 429 429 437 425 441 440 440 431 436 436 436 436 437 437 437 435 431 438 438 438 438 424 428 442 428 423 438 430 430 430 430 430 430 430
Plywood, SystemIndependent Accessories
Adjustable Brace CB 164-224 Adjusting Unit CB 160 Advancing Screw M24, galv. Allan Key SW 14, long Anchor Positioning Plate M24, galv. Anchor Positioning Stud M 24, galv. Anchor Sleeve M24 Bearing Box BR Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Carriage CB 240 Climbing Bracket CB 160 Climbing Bracket CB 240 Climbing Cone-2 M 24/DW 15, galv. Cone for Bolt Anchor Sleeve M24 Connector TRIO-CB Crane Eye BR 2,5 t Crane Eye CB 240 Cutting Cost Scaffold Tube Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 End Guardrail Frame 55 F.H. Bolt DIN 603 M6 x 180 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN603 M8 x 180 MU, galv. Finishing Platform Beam CB Folding Bearing Plate 25 Gravity Pivot Plate BR Guardrail Connector CB Handrail Post CB 190 Handrail Post CB 200 Handrail Post CB 370 Hatch 55 x 60, foldable Height Adjusting Unit CB Hex. Nut DW 15 SW 30/50, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-140/160, galv. Intermediate Handrail Post CB Ladder 180/6, galv. Ladder 220/6 Ladder Base 30 adjustable, galv. Ladder Base, galv. Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 80, galv. Platform Beam BR U100 Platform Beam BR U120 Platform Beam BR U140 Platform Beam BR U160 Platform Connection CB 160 Platform Post CB 225 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Post Extension CB 180 Rack CB 240 Ratchet Lever SW 19 Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m
421
Service
051110 051130 029270 027212 029280 026420 026230 108162 029560 026430 026430 051020 051100 051000 031220 026240 051090 105401 051010 026417 030050 030050 030050 065066 051650 710240 024360 108834 051230 020330 020600 051160 051210 051190 051220 110608 051030 030070 024070 024080 051630 051410 051420 109105 051460 103718 051450 104132 029440 051640 020320 020510 020310 020520 051120 051200 026250 051050 051040 027180 026411 026412 026413 026414 026419 026418 026415
Slab Formwork
CB Climbing System, BR Shaft Platform
Item no. Weight kg 051000 112,000
Climbing Bracket CB 240 Complete Climbing Scaffold Bracket CB 240.
Complete with 2 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 715977 Guardrail Post CB 240 1 pc. 710222 Bolt ISO 4014 M16 x 80-8.8, galv. 1 pc. 070890 Nut ISO 7042 M16-8, galv. Note Delivery condition: handrail post in transport securing device.
3214
400
440
2326
350
30
1100
Column Formwork
440
50
Wall Formwork
Formwork Girders
CB Climbing System, BR Shaft Platform
1800
Slab Formwork
228
Shoring Systems
2411
33,900
Climbing Systems
051020
Carriage CB 240 For assembly on the Climbing Bracket CB 240. Can be installed in 2 positions: for decking support with GT 24 girder or timber 8 x 16.
Complete with 1 pc. 710944 Key Wedge, FW Note Wrench size SW 19.
1175
027180 051040
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
625
90
422
1,760 8,440
Accessories Ratchet Lever SW 19 Rack CB 240
250
165 / 245
SW 19
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 051040 8,440
Rack CB 240 For Carriage CB 240.
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Column Formwork
73
64
Wall Formwork
10
30
33
2240
Slab Formwork
Complete with 1 pc. 018050 Bolt Ø 16 x 65/86, galv. 1 pc. 018060 Cotter Pin 4/1, galv. Safety Instructions Load-bearing point: capacity 700 kg.
440
50
Scaffolding, Stairs, Working Platforms
Complete with 2 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 715977 Guardrail Post CB 240 1 pc. 710222 Bolt ISO 4014 M16 x 80-8.8, galv. 1 pc. 070890 Nut ISO 7042 M16-8, galv. Note Delivery condition: handrail post in transport securing device.
Bridge- and Tunnel Formwork
440
1521
3135 228
Plywood, SystemIndependent Accessories
30
1025
Climbing Bracket CB 160 Complete Climbing Scaffold Bracket CB 160.
630
79,000
1800
051100
Shoring Systems
62
Climbing Systems
Crane Eye CB 240 For assembly on the Climbing Bracket CB 240 during use as working scaffold.
1606
423
Service
0,930
140
051010
Item no. Weight kg 051130 12,900
Adjusting Unit CB 160 For Climbing Bracket CB 160.
Complete with 2 pc. 711084 Bolt ISO 4014 M20 x 150-8,8, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv. Note Wrench size SW 19.
Wall Formwork
Formwork Girders
CB Climbing System, BR Shaft Platform
Column Formwork
237
SW 19
260
4,560
Platform Connection CB 160 For mounting platform decking on the Climbing Bracket CB 160 for use as working scaffold.
Complete with 2 pc. 711078 Bolt ISO 4014 M20 x 130-8.8, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv. Safety Instructions Load-bearing point: capacity 500 kg.
235
Shoring Systems
55
70
Slab Formwork
051120
83
Scaffolding, Stairs, Working Platforms
Climbing Systems
130
051060 051150
73,400 103,000
Strongbacks CB Strongback CB 270 Strongback CB 380 For assembling system formwork on Climbing Brackets CB 240 and 160. For formwork heights up to 5.40 m.
90
Complete with 1 pc. 715936 Bolt with Split Bolt 1 pc. 018060 Cotter Pin 4/1, galv. Safety Instructions Load-bearing point: capacity 1.9 t.
196 86
Service
240 7 x 60 = 420
424
2730
Plywood, SystemIndependent Accessories
1430
8 x 60 = 480
Bridge- and Tunnel Formwork
160
120
Formwork Girders
CB Climbing System, BR Shaft Platform Height Adjusting Unit CB For height adjustment of VARIO GT 24 elements on the Strongback CB.
Complete with 1 pc. 715936 Bolt with Split Bolt 1 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 19.
Wall Formwork
Item no. Weight kg 051030 5,320
240
max 182
82 Ø25
60
25,000
Adjustable Brace CB 164-224 For aligning the Strongback CB.
190
55
Complete with 2 pc. 715936 Bolt with Split Bolt 2 pc. 018060 Cotter Pin 4/1, galv. Slab Formwork
051110
Column Formwork
SW 19
89
1580
max 2240
Shoring Systems
min 1640
Climbing Systems
Complete with 1 pc. 715936 Bolt with Split Bolt 1 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 19.
Scaffolding, Stairs, Working Platforms
SW 19
Bridge- and Tunnel Formwork
400
Ø25
425
Service
Plywood, SystemIndependent Accessories
415
180
Connector TRIO-CB For fixing TRIO elements to the Strongback CB. Used on horizontal or vertical struts. With integrated height adjustment.
100
13,500
82
051090
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 110059 2,620
Waler Fixation U100-U120 For fixing VARIO GT 24 elements to Strongback CB, Steel Waler SRU and V-Strongback SKS.
126 80
107007
3,410
Tension Anchor Connector CB To prevent tipping over due to wind loads with Tie Rod DW 15.
80 - 145
76
284
120
Complete with 1 pc. 710219 Bolt ISO 4014 M16 x 100-8.8, galv. 1 pc. 070890 Nut ISO 7042 M16-8, galv. 400
60
Column Formwork
Wall Formwork
Ø16
Scaffolding, Stairs, Working Platforms
64
30
DW 15
Wall Tension Anchor To prevent tipping over due to wind loads with Tie Rod DW 15.
Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.
Ø26
180
4,100
100
107008
Climbing Systems
Shoring Systems
Slab Formwork
M 16x100
DW 15
50
255
100
026430
0,334
051260
3,300
331
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Belt Connector CB For connecting Tension Belt L = 5.70 m, 25 kN to the Brackets CB 240 or CB 160.
Complete with 1 pc. 710219 Bolt ISO 4014 M16 x 100-8.8, galv. 1 pc. 070890 Nut ISO 7042 M16-8, galv.
60
Bridge- and Tunnel Formwork
400
59
25
Plywood, SystemIndependent Accessories Service
M 16x100
Ø20
426
Formwork Girders
CB Climbing System, BR Shaft Platform
Wall Formwork
Tension Belt Connector Wall To prevent tipping over due to wind loads with tension belt. Mounted on the wall or to the strut of the Bracket SKS 180.
0
Item no. Weight kg 051270 1,620
12
Ø50
80
Ø25
100
026430
0,334
Column Formwork
0,334
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36. Slab Formwork
026430
12
70
SW 36
051250
2,790
Tension Belt, l = 5.70 m, 25 kN
Shoring Systems
M24
Technical Data Permissible tension force 25.0 kN.
1000 max 5700
Complete with 4 pc. 710232 Bolt ISO 4014 M16 x 130-8.8, galv. 4 pc. 070890 Nut ISO 7042 M16-8, galv.
965
249
80
1230
Plywood, SystemIndependent Accessories
Ø17
Bridge- and Tunnel Formwork
M 16x130
16
86
965
427
Service
232
270
Finishing Platform Beam CB For assembling finishing platforms.
80
17,000
150
051230
Scaffolding, Stairs, Working Platforms
Climbing Systems
min 1600
Item no. Weight kg 051200 44,400
Platform Post CB 225 For assembling finishing platforms. For concreting heights up to 3.60 m. In combination with Post Extension CB 180 for concreting heights from 3.60 to 5.40 m.
Wall Formwork
Complete with 2 pc. 710232 Bolt ISO 4014 M16 x 130-8.8, galv. 2 pc. 070890 Nut ISO 7042 M16-8, galv.
M 16x130
Slab Formwork
Ø22
30
200
Shoring Systems
500
800
200
Ø17
1000
1750
Column Formwork
710
200
30
86
2510
Formwork Girders
CB Climbing System, BR Shaft Platform
Climbing Systems
051050
26,400
Post Extension CB 180 For assembling finishing platforms. In combination with Platform Post CB 225 for concreting heights from 3.60 to 5.40 m.
Complete with 2 pc. 070890 Nut ISO 7042 M16-8, galv. 2 pc. 710232 Bolt ISO 4014 M16 x 130-8.8, galv.
85
1195
1300
Bridge- and Tunnel Formwork
2040
200
995
500
Scaffolding, Stairs, Working Platforms
200
20
M 16x130
Service
20
200
Plywood, SystemIndependent Accessories
Ø17
428
Item no. Weight kg 051190 17,400
Handrail Post CB 200 For assembling guardrails on finishing platforms. Basic extension for Handrail Post CB 190 and 370.
Complete with 2 pc. 710232 Bolt ISO 4014 M16 x 130-8.8, galv. 2 pc. 070890 Nut ISO 7042 M16-8, galv.
Formwork Girders
CB Climbing System, BR Shaft Platform
30
Wall Formwork
86
2225
80
280
440
500
Column Formwork
1125
460
M 16x130
385
30
Climbing Systems
Complete with 2 pc. 070890 Nut ISO 7042 M16-8, galv. 2 pc. 710232 Bolt ISO 4014 M16 x 130-8.8, galv.
200
M 16x130
Bridge- and Tunnel Formwork
440
Plywood, SystemIndependent Accessories
80
330
Ø17
429
Service
80 80
440
2155 / 3955
N x 500
Scaffolding, Stairs, Working Platforms
Ø9
1895 / 3695
Handrail Posts CB Handrail Post CB 190 Handrail Post CB 370 For assembling guardrails on finishing platforms. Handrail Post 190 for concreting heights up to 3.60 m. Handrail Post CB 370 for concreting heights from 3.60 to 5.40 m.
200
19,000 34,600
30
051210 051220
Shoring Systems
30
60
200
500
820
80
Slab Formwork
440
200
Ø17
026415 026417 026411 026412 026413 026414 026419 026418
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0
L
m m m m m m
1000 2000 3000 4000 5000 6000
L
1,400
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
(27)
017010
Shoring Systems
Slab Formwork
Ø48,3x3,2
SW 19
0,850
Scaffolding, Stairs, Working Platforms
Climbing Systems
017040
Screw-On Coupler AK 48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 30, SW 19.
( 12)
SW 30
SW 19
051160
0,894
Guardrail Connector CB For assembling scaffold tubes Ø 48 mm on handrail posts.
Note Wrench size SW 19.
60
Service
Plywood, SystemIndependent Accessories
9
Bridge- and Tunnel Formwork
Ø48
SW 19
024140
430
0,033
Accessories F.H. Bolt DIN 603 M8 x 70 MU, galv.
95
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
CB Climbing System, BR Shaft Platform
Formwork Girders
CB Climbing System, BR Shaft Platform Side Guardrail Post For assembly of an end guardrail. Bolted to the platform main beam.
40
Column Formwork
1270
440
440
Wall Formwork
50
Item no. Weight kg 051610 6,940
Ø7 50
190
Ø9
100
Slab Formwork
340
051630
11,000
Accessories Lag Screw DIN 571 6 x 80, galv. Shoring Systems
0,014
Intermediate Handrail Post CB For assembling a guardrail with large cantilevers. Bolted on the platform main beam.
440
1270
440
Climbing Systems
50
051640
Ø9
110
Accessories Lag Screw DIN 571 6 x 80, galv.
051640
0,014
Lag Screw DIN 571 6 x 80, galv.
Plywood, SystemIndependent Accessories
0,014
280
Note Wrench size SW 10. 80
SW 10
431
Service
051640
120
50
Bridge- and Tunnel Formwork
30
Scaffolding, Stairs, Working Platforms
190
230
Ø7
Item no. Weight kg 065066 15,100
End Guardrail Frame 55 Clampable end handrail for all PERI scaffold platforms and climbing systems.
max 417
Column Formwork
1360
1020
Wall Formwork
Formwork Girders
CB Climbing System, BR Shaft Platform
051650
0,060
F.H. Bolt DIN 603 M6 x 180 MU, galv. With nut.
Shoring Systems
17
180 M6
Climbing Systems
SW 10
710240 024360 108834
0,050 0,058 0,085
F.H. Bolt DIN 603 M8, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN603 M8 x 180 MU, galv. With hex. nut.
L B 100 80 125 113 180 28 Note Wrench size SW 13.
L B
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Note Wrench size SW 10.
24
M6/M8 SW 10 / SW 13
Plywood, SystemIndependent Accessories Service
400
432
Ø17 / Ø 21
Slab Formwork
560
Note Permissible load: see PERI product information.
Wall Formwork
Scaffold Mounting Ring M24, galv. Tie System M24. For anchoring climbing systems.
Ø73
Item no. Weight kg 029470 0,723
029560
0,535
Accessories Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36. Slab Formwork
0,535
Column Formwork
73
029560
120 M24
1,030
Screw on Cone-2 M24/DW 20, galv. Tie System M24. For anchoring climbing systems.
Shoring Systems
SW 36
114158
Formwork Girders
CB Climbing System, BR Shaft Platform
Note Permissible load see PERI product information. Wrench size SW 36. 150
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
Note Permissible load: see PERI Product Information. Lost anchor part.
65 DW 20 Ø6
Plywood, SystemIndependent Accessories
Threaded Anchor Plate DW 20 For use with Tie Rod DW 20, B 20 or Screw-On Cone-2 M24/DW 20. For anchoring in the concrete.
433
Service
0,801
70
M 24
030860
Accessories Threaded Anchor Plate DW 20
32
0,801
100
030860
Climbing Systems
65
DW 20
SW 36
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 031220 1,010
Climbing Cone-2 M 24/DW 15, galv. Tie System M24. For anchoring climbing systems.
Note Permissible load: see PERI product information. Wrench size SW 36.
0,516 1,440 1,550
030840
0,516
Accessories Threaded Plate DW 15 Tie Rod DW 15 spec. length Tie Rod B 15 spec. length Threaded Plate DW 15 For use with Tie Rod DW 15 or B 15. For anchoring in the concrete.
Note Permissible load: see PERI Product Information. Lost anchor part.
030030 030050
1,440 0,000
Tie Rod DW 15 Tie Rod DW 15 spec. length Cutting Cost Tie Rod DW 15/ B 15
Note Non-weldable! Take official approval into consideration! Technical Data Permissible load 90 kN. DW 15
030740 030050 030150
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Ø27 Ø 80
Ø6
Climbing Systems
Shoring Systems
60 DW 15
1,550 0,000 0,420
Tie Rods B 15 Tie Rod B 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod B 15 l = 0.30 m
Note Weldable! Take official approval into consideration! Technical Data Permissible load 85 kN. B 15
Plywood, SystemIndependent Accessories Service
25
50
M 24 70
DW 15
030840 030030 030740
Slab Formwork
Column Formwork
Wall Formwork
100 SW 36
434
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 029270 0,331
Advancing Screw M24, galv. For fixing the M24 anchor system if the plywood formlining is drilled through.
Note Wrench size SW 19.
Wall Formwork
70 M 24
0,196
029280
0,196
Accessories Anchor Positioning Plate M24, galv. Anchor Positioning Plate M24, galv. For fixing the M24 anchor system if the plywood formlining is drilled through.
Slab Formwork
029280
Column Formwork
SW 19
80
Ø7 Ø25
0,005
Accessories Lag Screw DIN 571 6 x 20, galv.
029440
0,005
Lag Screw DIN 571 6 x 20, galv.
Note Wrench size SW 10.
Climbing Systems
029440
6
Shoring Systems
60
20 SW 10
026420
0,123
Anchor Positioning Stud M 24, galv. For fixing the M24 anchor system if the plywood formlining is not drilled through.
Scaffolding, Stairs, Working Platforms
M6
Note Allen Key SW 14.
60
Bridge- and Tunnel Formwork
SW 14 Ø5 M 24
0,445 0,005
Accessories Allan Key SW 14, long Nail 3 x 80
435
Service
027212 710312
Plywood, SystemIndependent Accessories
40
Item no. Weight kg 051410 11,700
Ladder 180/6, galv. As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
450
Wall Formwork
Formwork Girders
CB Climbing System, BR Shaft Platform
5 x 298 = 1490
83
Column Formwork
1960
Ladder 220/6 As access for PERI formwork systems.
Complete with 4 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 4 pc. 710381 Nut ISO 7042 M12-8, galv.
400 3 x 298 = 894
Shoring Systems
2265
5,070
Climbing Systems
109105
Ladder Base 30 adjustable, galv. For horizontal fixing of ladders on the platform decking. 95
13,5
0 - 320
525
Scaffolding, Stairs, Working Platforms
170
443
Service
2,180
Ladder Base, galv. As bottom ladder connection and for securing ladders against sliding on the scaffold decks.
210
051460
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
423
405
436
50
450
12,800
Slab Formwork
051420
Formwork Girders
CB Climbing System, BR Shaft Platform Complete with 2 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 2 pc. 710381 Nut ISO 7042 M12-8, galv. Note Wrench Size SW 18.
Wall Formwork
Ladder Hook, galv. For adjusting the bottom ladder. Always use in pairs.
330
Item no. Weight kg 103718 0,684
Column Formwork
SW 18
15,600 25,200
Ladder Safety Cages, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 150, galv. Ladder safety cage for PERI access ladders.
Complete with 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv. 4 pc. 701763 Clamping Plate Fl 25 x 10 x 90 Slab Formwork
104132 051450
Shoring Systems
704
750 / 1500
710
Climbing Systems
Complete with 4 pc. 710381 Nut ISO 7042 M12-8, galv. 4 pc. 710266 Bolt ISO 4017 M12 x 25-8.8, galv.
Scaffolding, Stairs, Working Platforms
550
103
560
662
550
6
Plywood, SystemIndependent Accessories
Hatch 55 x 60, foldable Self-locking hatch opening for access ladders. Clear opening dimensions approx. 55 x 60 cm.
386
15,600
6
110608
Bridge- and Tunnel Formwork
1140
600
60
820
710
437
Service
Sliding Hatch Cover Non self-locking hatch opening for access ladders. Clear opening dimensions approx. 73 x 55 cm.
830
37,900
730
051430
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 027180 1,760
Ratchet Lever SW 19 For moving Carriage CB 240 and SKSF 240.
Note Wrench size SW 19.
027200
0,100
031480
2,460
Accessories Insert Socket SW 19 Socket Wrench SW 36, cromatized For a diverse range of uses.
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
795
510
027212
0,445
Allan Key SW 14, long For unscrewing the Anchor Positioning Stud M24, M30 and M36.
230
020320 020510 020310 020520
21,800 27,400 32,800 38,600
Platform Beams BR Platform Beam BR U100 Platform Beam BR U120 Platform Beam BR U140 Platform Beam BR U160 As cross beam for shaft platforms.
Note The specified item no. is for the platform beams only (2 pieces). Required accessories are to be ordered separately. Permissible load: see PERI Design Tables.
700
700
700
700
Service
Plywood, SystemIndependent Accessories
52
020620 105401 020330 020600
438
0,561 2,210 12,100 6,740
Accessories Spacer for Platform Beam BR Crane eye for Platform Beam BR 2,5 t Folding Bearing Plate 25 Gravity Pivot Plate BR
50
L
115
50
50
U 100 U 120 U 140 U 160
Bridge- and Tunnel Formwork
=
=
Scaffolding, Stairs, Working Platforms
Climbing Systems
SW 14
273
54
123
Complete with 1 pc. 710226 Bolt ISO 4014 M20 x 90-8.8, galv. 1 pc. 781053 Nut ISO 7042 M20-8, galv. Note Spacing maximum 700 mm. Number required depends on length of platform beam. Wrench size SW 30. 52
Slab Formwork
Technical Data Load-bearing point capacity 2.5 t.
Ø60
15
100
0,561
020600
6,740
75
Accessories Spacer for Platform Beam BR Gravity Pivot Plate BR For supporting Platform Beam BR in wall box-outs. 2 pieces per platform beam.
Complete with 1 pc. 781053 Nut ISO 7042 M20-8, galv. 1 pc. 710226 Bolt ISO 4014 M20 x 90-8.8, galv. Note Wrench size SW 30. Technical Data Permissible load: see PERI product information. 130
237
Scaffolding, Stairs, Working Platforms
020620
Shoring Systems
Crane Eye BR 2,5 t As attachment point for moving climbing systems or Platform Beam BR.
245
2,210
135
105401
Column Formwork
M 20x90 SW 30
Formwork Girders
Spacer for Platform Beam BR For Platform Beam BR.
65
48
70
SW 30
75
Climbing Systems
Item no. Weight kg 020620 0,561
Wall Formwork
CB Climbing System, BR Shaft Platform
125 437
Bridge- and Tunnel Formwork
52
Plywood, SystemIndependent Accessories
1,610
Accessories Bearing Box BR
439
Service
108162
45
80
M 20x90
Item no. Weight kg 108162 1,610
Bearing Box BR For creating wall box-outs for mounting with the gravity pivot plate. 70
0,331
020330
12,100
Folding Bearing Plate 25 For supporting Platform Beam BR with M24 anchor system. 2 pieces per platform beam.
Technical Data Permissible load 25.0 kN.
258
162
234
50
291
026430
0,334
024070
0,460
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
140
25
Accessories Bolt ISO 4014 M24 x 70-10.9, galv. Hook Strap HB 24-100/120, galv. For fixing GT 24 girders to Steel Waler SRZ and SRU Profile U100 - U120.
Note Non Weldable! Take official approval into consideration! Technical Data Permissible load 90 kN. M 8x70
82
162 (U 120)
024080
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
210
Accessories Advancing Screw M24, galv.
152 (U 100)
Service
M 24
170
029270
Slab Formwork
Column Formwork
30 °
Wall Formwork
140
350
Formwork Girders
CB Climbing System, BR Shaft Platform
0,676
Hook Strap HB 24-140/160, galv. For fixing GT 24 girders to Steel Waler SRZ and SRU Profile U140 - U160. M 8x70
172 (U 140) 182 (U 160)
440
82
Item no. Weight kg 1,550 0,000 0,420
Tie Rods B 15 Tie Rod B 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod B 15 l = 0.30 m
Note Weldable! Take official approval into consideration! Technical Data Permissible load 85 kN.
Wall Formwork
030740 030050 030150
Formwork Girders
CB Climbing System, BR Shaft Platform
Column Formwork
B 15
1,560
Wingnut Pivot Plate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15. With pivoting captive nut. Maximum angle of tilting 8°.
Technical Data Permissible load 90 kN.
117
Slab Formwork
030370
72
Shoring Systems
110
Ø10
0,222
Hex. Nut DW 15 SW 30/50, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 30. Technical Data Permissible load 90 kN.
Climbing Systems
030070
50
DW 15
026230
1,010
Anchor Sleeve M24 To anchor platform systems.
Note Permissible load: see PERI product information.
Scaffolding, Stairs, Working Platforms
SW 30
100 120
Bridge- and Tunnel Formwork
8
12
Ø 31
15
026240 026250
0,026 0,005
Plywood, SystemIndependent Accessories
DW 20
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve
441
Service
68
Formwork Girders
CB Climbing System, BR Shaft Platform Item no. Weight kg 026240 0,026
Cone for Bolt Anchor Sleeve M24 Results in a concrete cover of 24 mm. 39
0,005
Plug Ø 26 mm for Bolt Anchor Sleeve M24 For closing the cone for the Anchor Sleeve M24.
Ø 26
Ø 23
27
026430
0,334
Bolt ISO 4014 M24 x 70-10.9, galv. High-strength bolts for anchoring climbing systems.
Note Wrench size SW 36.
70
SW 36
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
M24
Plywood, SystemIndependent Accessories Service
50
Ø31
026250
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
24
442
Service
443
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
444
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Shoring Systems
Slab Formwork
Column Formwork
450 451 450 451 451 451 447 457 457
Climbing Systems
Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 250 Public Steel Deck UDS 32 x 72 Stringer Frame UZF 150 Stringer Frame UZF 200 Stringer Frame UZF 250 Waler on Staircase UAS 75 Zyl. Bolt ISO 4762 M12 x 60-8.8, galv. Zyl. Bolt ISO 4762 M12 x 90-8.8, galv.
Scaffolding, Stairs, Working Platforms
100375 106587 100488 107162 106582 106583 115189 104278 104528
Bridge- and Tunnel Formwork
457 449 449 451 451 451 449 449 453 454 454 453 453 456 456 456 452 452 452 453 454 453 446 452 455 456 455 456 455 456 455 456 456 455 455 456 456 455 455 456 455 456 455 456 450 457 448 448 452 448 448 449 449 450 446 446 447 447 447 446 446 455 450 450 451 450 451
Plywood, SystemIndependent Accessories
Bolt ISO 4014 M12 x 70-8.8, galv. Edge Profile UH 100 Edge Profile UH 125 End Guardrail Post UZE 150 End Guardrail Post UZE 200 End Guardrail Post UZE 250 End Step UAE 100 End Step UAE 125 Gap Filler UZD 150 x 16 Gap Filler UZD 150 x 31 Gap Filler UZD 150 x 37 Gap Filler UZD 200 x 16 Gap Filler UZD 250 x 16 Guardrail Connector, Corner Guardrail Connector, Straight Guardrail Filler Landing Brace UZB 150 Landing Brace UZB 200 Landing Brace UZB 250 Landing Brace UZB 90° Landing Cover Plate UZD 150/25 Landing Guardrail UZG 150 Landing Link Panel UAB 30 Landing Transom UZL 150 Ledger UH 100 Ledger UH 100 Ledger UH 125 Ledger UH 125 Ledger UH 150 Ledger UH 150 Ledger UH 200 Ledger UH 200 Ledger UH 25 Ledger UH 25 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 400 Ledger UH 400 Ledger UH 50 Ledger UH 50 Ledger UH 75 Ledger UH 75 Ledger with Lap UHP 200 Nut ISO 7042 M12-8, galv. Stair Guardrail UAG Stair Guardrail UAH Stair Guardrail UZG 250/150 Stair Step UAR 100 Stair Step UAR 125 Stair Stringer UA 250/200 Stair Stringer UA 250/200 Stair Stringer UZS 250/150 Staircase UAS 64 x 250/200, Alu Staircase UAS 64 x 300/200, Alu Staircase UAS 75 x 150/100, Alu Staircase UAS 75 x 150/50 T, Alu Staircase UAS 75 x 150/50, Alu Staircase UAS 75 x 250/200, Alu Staircase UAS 75 x 300/200, Alu Standard UVR 300 Public Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 150 Public Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 200 Public
445
Service
720610 114349 114621 108536 107178 108544 109208 114180 107981 107986 107977 108010 108011 108387 108218 108214 108000 108172 108179 108034 108412 108190 101671 108191 114632 101159 114638 110347 114641 100021 114645 100023 104780 114613 114648 100025 100027 114651 114654 100029 114595 104779 114629 100017 106626 710381 100742 100830 108189 109198 114179 114731 109219 107448 100737 100738 111103 111087 111095 111117 111124 107930 100486 100355 106585 100373 106586
Wall Formwork
PERI UP Stairs
Item no. Weight kg 100737 100738
25,300 29,600
Staircases UAS 64 Staircase UAS 64 x 250/200, Alu Staircase UAS 64 x 300/200, Alu Assembly on Decking Transom UHD together with Steel Deck UDS.
Technical Data Permissible load 2.0 kN/m2.
Wall Formwork
Formwork Girders
PERI UP Stairs
2000
Column Formwork
350 / 600
Shoring Systems
Slab Formwork
2500 / 3000
101671
1,980
Landing Link Panel UAB 30 For closing gaps on alternating Staircase Units UAS 64. 290
111117 111124
28,100 33,100
Staircases UAS 75 Staircase UAS 75 x 250/200, Alu Staircase UAS 75 x 300/200, Alu Assembly on Ledger UH together with Industrial Deck UDI.
Technical Data Permissible load 2.0 kN/m2.
350 / 600
Service
Plywood, SystemIndependent Accessories
2000
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
400
2500 / 3000
446
Formwork Girders
PERI UP Stairs Item no. Weight kg 111087 17,600
Staircase UAS 75 x 150/50 T, Alu Assembly on Ledger UH together with Industrial Deck UDI.
Technical Data Permissible load 2.0 kN/m2.
500
Wall Formwork
750
Column Formwork
1500
Staircase UAS 75 x 150/50, Alu Assembly on Ledger UH together with Industrial Deck UDI.
Technical Data Permissible load 2.0 kN/m2. Slab Formwork
17,600
500
210
17,900
Staircase UAS 75 x 150/100, Alu Assembly on Ledger UH together with Industrial Deck UDI.
Technical Data Permissible load 2.0 kN/m2.
Climbing Systems
111103
Shoring Systems
1500
Scaffolding, Stairs, Working Platforms
1000
590
Waler on Staircase UAS 75 Mounted on the treads of the staircase. Allows installation of Industrial Decks Steel UDI.
698
Plywood, SystemIndependent Accessories
3,080
95
115189
Bridge- and Tunnel Formwork
1500
217
447
Service
111095
Item no. Weight kg 100742 10,000
Stair Guardrail UAG Suitable for Staircase UAS 64 x 250/200, UAS 64 x 300/200, UAS 75 x 250/200 and UAS 75 x 300/200 as internal and external guardrails.
Wall Formwork
Formwork Girders
PERI UP Stairs
1294
100830
4,960
Stair Guardrail UAH For fixing to the stringers of the Staircase Units UAS 64 x 250/200, UAS 63 x 300/200, UAS 75 x 250/200, UAS 75 x 300/200.
519 976
109198 114179
Stair Steps UAR Stair Step UAR 100 Stair Step UAR 125 Tread for Stair Stringer UA. Non-slip due to perforated surface.
Technical Data Permissible load 3.0 kN/m2.
1000 / 1250 1044 / 1294
293
Plywood, SystemIndependent Accessories Service
7,390 9,250
82
252
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
2390
Column Formwork
28 8
448
Formwork Girders
PERI UP Stairs Item no. Weight kg End Steps UAE End Step UAE 100 End Step UAE 125 Last step for the Stair Stringer UA. Secures all steps.
Technical Data Permissible load 3.0 kN/m2.
Wall Formwork
5,610 6,590
200
109208 114180
940 / 1190
Column Formwork
57
1000 / 1250
Edge Profiles UH Edge Profile UH 100 Edge Profile UH 125 Assembly on UH Ledger for anti-slip protection on the first step at start of stairs with Stair Stringer UA.
Slab Formwork
0,770 0,997
850 / 1100
39
48
114349 114621
Shoring Systems
1000 / 1250
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Technical Data Permissible load 3.0 kN/m2.
1948 / 947
2453 / 1203
Plywood, SystemIndependent Accessories
2500 / 1250
449
Service
Stair Stringers UA Stair Stringer UA 250/200 Stair Stringer UA 250/200
1500 / 500
15,300 9,350
200 200
109219 114731
Item no. Weight kg 107448 42,800
Stair Stringer UZS 250/150
Wall Formwork
Formwork Girders
PERI UP Stairs Note Accessories: Steel Deck UDS (8x), Steel Deck UDS Public (1x). Technical Data Perm. Load: 1.5 m step width: 7.5 kN/m2 2.5 m step width: 5.0 kN/m2 (with steps left and right of the stringers)
Shoring Systems
Slab Formwork
1025
167 167
1445
340
Column Formwork
2500
106626
6,550
106626
6,550
Accessories Ledger with Lap UHP 200 Ledger with Lap UHP 200 Mounted on Stair Stringer UZS. 2000
Scaffolding, Stairs, Working Platforms
Climbing Systems
60
1932
30
Ø22
100488 100486 100355 100373 100375
5,200 7,060 11,200 14,100 17,000
Steel Steel Steel Steel Steel Steel
Decks UDS Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32
x x x x x
72 104 150 200 250
X 720 1040 1500 2000 2500
perm. p [kN/m²] 6,0 6,0 6,0 6,0 6,0
Service
Plywood, SystemIndependent Accessories
320
Bridge- and Tunnel Formwork
71
X
102605
450
0,420
Accessories Deck Link Plate UED
Formwork Girders
PERI UP Stairs Item no. Weight kg 15,800 20,600 25,200
Steel Decks UDS Public Steel Deck UDS 32 x 150 Public Steel Deck UDS 32 x 200 Public Steel Deck UDS 32 x 250 Public As uppermost decking on the Stringer UZS. Provides a closed set of stairs if used on all steps.
X 1500 2000 2500
Wall Formwork
106585 106586 106587
Stringer Frames UZF Stringer Frame UZF 150 Stringer Frame UZF 200 Stringer Frame UZF 250 Fitted to Stringer UZS for mounting of Guardrail Frame UZG.
L 1570 2070 2570
X 1500 2000 2500
Y 1458 1958 2458
Shoring Systems
20,300 24,300 28,300
Climbing Systems
348
L X
234
Y
108536 107178 108544
16,300 20,300 24,300
Accessories Nut ISO 7042 M12-8, galv. Bolt ISO 4014 M12 x 70-8.8, galv. End Guardrail Posts UZE End Guardrail Post UZE 150 End Guardrail Post UZE 200 End Guardrail Post UZE 250 For 2-, 4- and 6-bay flights of stairs in connection with Stringer Frame UZF.
L 1535 2035 2535
X 1500 2000 2500
Scaffolding, Stairs, Working Platforms
0,017 0,075
Y 1508 2008 2508
Bridge- and Tunnel Formwork
710381 720610
348
Plywood, SystemIndependent Accessories
L X
234
Y
710381 720610
0,017 0,075
Accessories Nut ISO 7042 M12-8, galv. Bolt ISO 4014 M12 x 70-8.8, galv.
451
Service
107162 106582 106583
Slab Formwork
320
Column Formwork
164
X
Formwork Girders
PERI UP Stairs Item no. Weight kg 108189 49,000
Stair Guardrail UZG 250/150
1145
Wall Formwork
2500
Shoring Systems
Slab Formwork
Column Formwork
100
489
710381 104528
0,017 0,089
108191
16,400
1389
553
Accessories Nut ISO 7042 M12-8, galv. Zyl. Bolt ISO 4762 M12 x 90-8.8, galv. Landing Transom UZL 150 For the installation of landing guardrails and dekking.
240
108000 108172 108179
13,700 18,200 22,700
Landing Brace UZB Landing Brace UZB 150 Landing Brace UZB 200 Landing Brace UZB 250 Required for installation of landing transoms over corners.
835
L 1447 1947 2447
332,5
X 1500 2000 2500
X L
30
241
Plywood, SystemIndependent Accessories Service
80
103 332,5
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
1500
452
Formwork Girders
PERI UP Stairs
Wall Formwork
Landing Brace UZB 90° Required for installation of landing transoms over corners.
263
Landing Guardrail UZG 150
180
1099
Shoring Systems
60
1440
Climbing Systems
34,600
1279
108190
Slab Formwork
30
Column Formwork
315
1500
L 1472 1972 2472
Scaffolding, Stairs, Working Platforms
Gap Fillers UZD Gap Filler UZD 150 x 16 Gap Filler UZD 200 x 16 Gap Filler UZD 250 x 16 For use with all landings.
X 1500 2000 2500
Bridge- and Tunnel Formwork
11,200 15,000 18,800
L
Plywood, SystemIndependent Accessories
107981 108010 108011
Accessories Zyl. Bolt ISO 4762 M12 x 60-8.8, galv.
165
0,067
X 50
104278
453
Service
Item no. Weight kg 108034 2,990
Formwork Girders
PERI UP Stairs Item no. Weight kg 107986 13,300
Gap Filler UZD 150 x 31 Only for corner landings.
310
Wall Formwork
1472
Column Formwork
50
1500
14,700
Gap Filler UZD 150 x 37 Only with flights of stairs which are directly attached to a corner landing.
Slab Formwork
107977
368
1471
50
Shoring Systems
1500
Climbing Systems
108412
9,770
Landing Cover Plate UZD 150/25 For closing gaps between flights of stairs at intervals of 25 cm.
Scaffolding, Stairs, Working Platforms
350
1436
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
28
1500
454
Formwork Girders
PERI UP Stairs
Wall Formwork Column Formwork
3000
500
500
500
120
Standard UVR 300 Public Used for scaffold extensions between guardrails.
160
Item no. Weight kg 107930 13,600
160
Slab Formwork
1380
Ø 48,3
X 250 500 750 1000 1250 1500 2000 2500
Sticker
White White
Climbing Systems
L 204 454 704 954 1204 1454 1954 2454
White Red
Scaffolding, Stairs, Working Platforms
Note Longitudinally-stamped with coloured label for easier identification.
X L
125
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
Ø22 125
455
Service
Ledgers UH (as of 01.07.2009) Ledger UH 25 Ledger UH 50 Ledger UH 75 Ledger UH 100 Ledger UH 125 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
60
1,440 2,080 2,760 4,490 5,450 4,730 6,060 7,380 8,700 11,400
30
114613 114595 114629 114632 114638 114641 114645 114648 114651 114654
Shoring Systems
Ø11
104780 104779 100017 101159 110347 100021 100023 100025 100027 100029
1,390 2,040 2,710 3,370 4,020 4,690 6,020 7,340 8,670 11,300
Ledgers UH (to 30.06.2009) Ledger UH 25 Ledger UH 50 Ledger UH 75 Ledger UH 100 Ledger UH 125 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
X L
Slab Formwork
Ø22
125
30
125
108218
1,330
Guardrail Connector, Straight For connecting guardrails and mounting of guardrail filler.
53
108214
0,132
108387
0,701
Guardrail Connector, Corner Connects landing guardrails across corners.
Bridge- and Tunnel Formwork
52 147
108214
0,132
Guardrail Filler Closes gap between guardrails. Mounted with guardrail connector straight.
135
Plywood, SystemIndependent Accessories
55
58
108218 Service
20
224
Accessories Guardrail Filler
Scaffolding, Stairs, Working Platforms
Climbing Systems
74
Shoring Systems
L X Sticker 204 250 454 500 704 750 White 954 1000 White 1204 1250 1454 1500 1954 2000 White 2454 2500 Red 2954 3000 Black 3954 4000 Note As of 01.07.2009, only available as rentable item. Longitudinally-stamped with coloured label for easier identification.
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
PERI UP Stairs
456
1,330
Accessories Guardrail Connector, Straight
20
Formwork Girders
PERI UP Stairs Item no. Weight kg 104278 0,067
Zyl. Bolt ISO 4762 M12 x 60-8.8, galv.
Note Wrench size SW 10. 60 M 12
0,089
Zyl. Bolt ISO 4762 M12 x 90-8.8, galv.
Wall Formwork
Note Wrench size SW 10.
Column Formwork
104528
SW 10
90 M 12
0,017
Nut ISO 7042 M12-8, galv. Self-locking.
Slab Formwork
710381
SW 10
Note Wrench size SW 18. M 12
Climbing Systems
Note Wrench size SW 18. 70 SW 18
Scaffolding, Stairs, Working Platforms
M12
Bridge- and Tunnel Formwork
Bolt ISO 4014 M12 x 70-8.8, galv.
Plywood, SystemIndependent Accessories
0,075
457
Service
720610
Shoring Systems
SW 18
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
PERI UP Rosett Modular Scaffolding 104305 100411 100242 100159 100870 100244 100014 101591 101588 114811 114825 114812 100401 100583 100149 100235 100711 100224 100581 100580 102605 101394 101378 101379 101381 101360 101372 101373 101375 101576 100039 100076 100079 100082 100085 100031 101799 104618 100349 101579 100444 104412 100265 100266 100267 100268 100810 100863 100042 107815 100047 106931 104356 100049 100051 123483 102617 100053 103607 100055 102846 100057 107867 100059 102862 100061 104391 458
Adj. Base Plate UJB 38-27/17 Adj. Base Plate UJB 38-50/30 Adj. Base Plate UJB 38-80/55 Adj. Base Plate UJS 38-80/50 Swivel Base Beam UVA 250 Base Plate UJP Base Standard UVB 24 Board Transom UHL 104 Board Transom UHL 72 Access Deck UAL 64 x 200/3 Access Deck UAL 64 x 250/3 Access Deck UAL 64 x 300/3 Bracket Brace UCP 72/104 Connection Protect Panel UPC Console Bracket UCB 104 Console Bracket UCB 32 Console Bracket UCB 36 Console Bracket UCB 72 Coupler Transom UHC 104 Coupler Transom UHC 72 Deck Link Plate UED Decking Gap Filler UD 11/150 Decking Gap Filler UD 11/200 Decking Gap Filler UD 11/250 Decking Gap Filler UD 11/300 Decking Gap Filler UD 7/150 Decking Gap Filler UD 7/200 Decking Gap Filler UD 7/250 Decking Gap Filler UD 7/300 Decking Transom Spigot UES Decking Transom UHD 104 Decking Transom UHD 150 Decking Transom UHD 200 Decking Transom UHD 250 Decking Transom UHD 300 Decking Transom UHD 72 End Guardrail in Advance UPA 104 End Guardrail in Advance UPA 72 End Guardrail UPX 104 End Guardrail UPX 32 End Guardrail UPX 72 Guardrail Coupler UPW Guardrail UPG 150 Guardrail UPG 200 Guardrail UPG 250 Guardrail UPG 300 Guardrail UPG 400 Handle Lock UJS Horizontal Brace UBH 150/150 Horizontal Brace UBH 200/150 Horizontal Brace UBH 200/200 Horizontal Brace UBH 250/150 Horizontal Brace UBH 250/200 Horizontal Brace UBH 250/250 Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/200 Horizontal Brace UBH 300/250 Horizontal Brace UBH 300/300 Ladder UEL w. Hook Ledger Brace UBL 150/100 Ledger Brace UBL 150/150 Ledger Brace UBL 150/200 Ledger Brace UBL 150/50 Ledger Brace UBL 200/100 Ledger Brace UBL 200/150 Ledger Brace UBL 200/200 Ledger Brace UBL 200/50
460 460 460 460 475 461 461 468 468 467 467 467 472 473 471 471 470 471 474 474 467 468 468 468 468 468 468 468 468 475 463 463 463 463 463 463 470 470 470 470 470 474 475 475 475 475 475 461 466 466 466 466 466 466 466 466 466 466 468 465 465 465 465 465 465 465 465
100063 102861 100065 100067 104766 100069 104762 101731 114635 100192 114641 100021 114645 100023 114648 100025 100027 114651 100029 114124 100440 111053 112926 100977 100840 112765 100981 100973 100572 100985 106630 100573 100989 106624 100574 100993 100575 100969 106965 100322 100518 100516 100503 100514 101306 102860 100009 100012 100013 102859 100486 100355 100373 100375 100377 100820 100488 110076 110160 110176 110208 110211 110526 108068 108114 108117 108120
Ledger Brace UBL 250/100 Ledger Brace UBL 250/150 Ledger Brace UBL 250/200 Ledger Brace UBL 300/100 Ledger Brace UBL 300/150 Ledger Brace UBL 300/200 Ledger Brace UBL 300/50 Ledger Bracket UHA Ledger UH 104 Ledger UH 104 Ledger UH 150 Ledger UH 150 Ledger UH 200 Ledger UH 200 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 400 Ledger UH 72 Ledger UH 72 Locking Pin Ø 48 Node Brace UBK 100/200 Node Brace UBK 104/100 Node Brace UBK 104/200 Node Brace UBK 125/200 Node Brace UBK 150/100 Node Brace UBK 150/150 Node Brace UBK 150/200 Node Brace UBK 200/100 Node Brace UBK 200/150 Node Brace UBK 200/200 Node Brace UBK 250/100 Node Brace UBK 250/150 Node Brace UBK 250/200 Node Brace UBK 300/100 Node Brace UBK 300/200 Node Brace UBK 72/200 Pavement Gantry UVG 104/240 Pavement Gantry UVG 176/240 Protection Panel UPP 150 x 100 Protection Panel UPP 200 x 100 Protection Panel UPP 250 x 100 Protection Panel UPP 300 x 100 Standard UVR 100 Standard UVR 150 Standard UVR 200 Standard UVR 300 Standard UVR 400 Standard UVR 50 Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 300 Steel Deck UDS 32 x 400 Steel Deck UDS 32 x 72 Toeboard Steel UPY 104 Toeboard Steel UPY 150 Toeboard Steel UPY 200 Toeboard Steel UPY 250 Toeboard Steel UPY 300 Toeboard Steel UPY 72 Toeboard Wood UPT-2 150 Toeboard Wood UPT-2 200 Toeboard Wood UPT-2 250 Toeboard Wood UPT-2 300
465 465 465 465 465 465 465 476 463 464 463 464 463 464 463 464 464 463 464 463 464 462 466 466 466 466 466 466 466 466 466 466 466 466 466 466 466 466 472 473 474 474 474 474 461 461 461 461 461 461 467 467 467 467 467 467 467 469 469 469 469 469 469 469 469 469 469
Formwork Girders
PERI UP Rosett Modular Scaffolding
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
469 462 462 462 462 462
Plywood, SystemIndependent Accessories
Toeboard Wood UPT-2 400 Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 250 Top Standard UVH 50
459
Service
108204 100000 100003 100005 100007 101309
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg 104305 2,450
Adj. Base Plate UJB 38-27/17 With captive white quick jack nut. 150
Wall Formwork
30
100863
1,030
100411
3,330
min 45 max 225 275
Ø10
Ø17
Accessories Handle Lock UJS Adj. Base Plate UJB 38-50/30 With captive red quick jack nut.
Slab Formwork
150 100
505
Ø10
Ø17
Shoring Systems
30
38
min 45 max 355
Column Formwork
100
38
4,520
Climbing Systems
100242
Adj. Base Plate UJB 38-80/55 With captive yellow quick jack nut. 38
805
100
min 45
30
Ø10
Ø17
100159
4,860
Adj. Base Plate UJS 38-80/50 Swivel With captive yellow quick jack nut. 38
823
150 100 Ø10
min 45
30
max 613
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
max 595
150
Service
Ø17
460
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg 100244 1,230
Base Plate UJP Without height adjustment. 31,8
1,030
Handle Lock UJS Secures the Adjustable Base Plate in the Standard when moving.
Wall Formwork
150
100
Ø17
Note Wrench size SW 19.
Column Formwork
100863
Ø10
130
105
Ø13
138
Slab Formwork
2,470
Base Standard UVB 24 For assembly directly on the base spindle.
160
160
Bridge- and Tunnel Formwork
120
Ø13
Scaffolding, Stairs, Working Platforms
Climbing Systems
L 500 1000 1500 2000 3000 4000
N x 500
Plywood, SystemIndependent Accessories
Ø 48,3
160
Ø11
461
Service
Standards UVR Standard UVR 50 Standard UVR 100 Standard UVR 150 Standard UVR 200 Standard UVR 300 Standard UVR 400
L
3,080 5,380 7,690 9,990 14,700 19,200
380
102859 101306 102860 100009 100012 100013
Shoring Systems
Ø11
470
Ø 48,3
120 120
230
100014
70
67
SW 19
101309 100000 100003 100005 100007
2,510 4,610 6,920 9,230 11,500
Top Standards UVH Top Standard UVH 50 Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 250 Without pins for supporting head spindles.
L 500 1000 1500 2000 2500
Ø11
Slab Formwork
L
N x 500
120
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
PERI UP Rosett Modular Scaffolding
Shoring Systems
380
160
Ø 48,3
Ø11
0,059
Locking Pin Ø 48 As tension-proof connection of standards. Ø10
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
49
462
68
Climbing Systems
111053
25
4,220 5,770 8,260 11,600 13,900 16,300
Decking Transoms UHD Decking Transom UHD 72 Decking Transom UHD 104 Decking Transom UHD 150 Decking Transom UHD 200 Decking Transom UHD 250 Decking Transom UHD 300 For attaching the Steel Decks UDS.
L X 675 720 995 1040 1455 1500 1955 2000 2455 2500 2955 3000 Note Consider load-bearing capacity in connection with decking length. Technical Data With hook for bracket support.
X L
Slab Formwork
80
80
Formwork Girders
100031 100039 100076 100079 100082 100085
Wall Formwork
Item no. Weight kg
Column Formwork
PERI UP Rosett Modular Scaffolding
Shoring Systems
X 720 1040 1500 2000 2500
Sticker
White Red Climbing Systems
L 674 994 1454 1954 2454
Note Longitudinally-stamped with coloured laber for easier identification.
Ø22
Scaffolding, Stairs, Working Platforms
X L
125
125
Bridge- and Tunnel Formwork
Ledgers UH (as of 01.07.2009) Ledger UH 72 Ledger UH 104 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
Plywood, SystemIndependent Accessories
2,670 3,510 4,730 6,060 7,380 8,700 11,400
463
Service
114124 114635 114641 114645 114648 114651 114654
Accessories Bracket Brace UCP 72/104
60
7,620
30
100401
100440 100192 100021 100023 100025 100027 100029
2,630 3,480 4,690 6,020 7,340 8,670 11,300
Ledgers UH (to 30.06.2009) Ledger UH 72 Ledger UH 104 Ledger UH 150 Ledger UH 200 Ledger UH 250 Ledger UH 300 Ledger UH 400
L X Sticker 674 720 994 1040 1454 1500 1954 2000 White 2454 2500 Red 2954 3000 Black 3954 4000 Note Longitudinally-stamped with coloured label for easier identification. As of 01.07.2009, only available as rentable item.
X L
Ø22
60
Formwork Girders
Item no. Weight kg
Column Formwork
Wall Formwork
PERI UP Rosett Modular Scaffolding
125
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
30
125
464
Formwork Girders Wall Formwork
L X Y Sticker 1347 1500 500 1601 1500 1000 1953 1500 1500 2358 1500 2000 1820 2000 500 2016 2000 1000 2305 2000 1500 2462 2500 1000 2658 2000 2000 White 2705 2500 1500 3010 2500 2000 Red 2795 3000 500 2926 3000 1000 3133 3000 1500 3400 3000 2000 Black Note With stamped length and coloured label for easier identification. UBL 150/250 identical to UBL 300/50, UBL 250/50 identical to UBL 200/150, UBL 100/100 identical to Diagonal Strut ST 100 (Art.no. 019940). 25
25
L
Shoring Systems
L
Climbing Systems
Ø42,4 25
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
X
Plywood, SystemIndependent Accessories
Ledger Braces UBL Ledger Brace UBL 150/50 Ledger Brace UBL 150/100 Ledger Brace UBL 150/150 Ledger Brace UBL 150/200 Ledger Brace UBL 200/50 Ledger Brace UBL 200/100 Ledger Brace UBL 200/150 Ledger Brace UBL 250/100 Ledger Brace UBL 200/200 Ledger Brace UBL 250/150 Ledger Brace UBL 250/200 Ledger Brace UBL 300/50 Ledger Brace UBL 300/100 Ledger Brace UBL 300/150 Ledger Brace UBL 300/200 Attach using holes in the ledger.
465
Service
3,800 4,450 5,350 6,390 5,010 5,510 6,250 6,650 7,160 7,270 8,050 7,500 7,840 8,370 9,050
Y
107867 100055 102846 100057 104391 100059 102862 100063 100061 102861 100065 104762 100067 104766 100069
Column Formwork
Item no. Weight kg
Slab Formwork
PERI UP Rosett Modular Scaffolding
Formwork Girders Wall Formwork
Item no. Weight kg 100969 100977 100840 112926 112765 100981 100973 100572 100985 106630 100573 100989 106624 100574 100993 100575
6,750 4,850 7,030 6,990 7,260 5,710 6,580 7,600 6,790 7,510 8,390 7,940 8,540 9,310 9,130 10,300
Node Braces UBK Node Brace UBK 72/200 Node Brace UBK 104/100 Node Brace UBK 104/200 Node Brace UBK 100/200 Node Brace UBK 125/200 Node Brace UBK 150/100 Node Brace UBK 150/150 Node Brace UBK 150/200 Node Brace UBK 200/100 Node Brace UBK 200/150 Node Brace UBK 200/200 Node Brace UBK 250/100 Node Brace UBK 250/150 Node Brace UBK 250/200 Node Brace UBK 300/100 Node Brace UBK 300/200 For hooking into the small hole of the rosette.
L 2179 1472 2301 2285 2401 1821 2152 2539 2246 2521 2860 2696 2930 3226 3131 3625
X 720 1040 1040 1000 1250 1500 1500 1500 2000 2000 2000 2500 2500 2500 3000 3000
Slab Formwork
Column Formwork
PERI UP Rosett Modular Scaffolding Y 2000 1000 2000 2000 2000 1000 1500 2000 1000 1500 2000 1000 1500 2000 1000 2000
Sticker
White
Red Black
47
Shoring Systems
Y
L
Ø42,4
47
100042 107815 100047 106931 104356 100049 100051 123483 102617 100053
7,350 8,700 9,870 10,200 11,300 12,400 11,800 12,700 13,800 15,000
Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal Horizontal
Braces UBH Brace UBH 150/150 Brace UBH 200/150 Brace UBH 200/200 Brace UBH 250/150 Brace UBH 250/200 Brace UBH 250/250 Brace UBH 300/150 Brace UBH 300/200 Brace UBH 300/250 Brace UBH 300/300
L 2042 2422 2749 2839 3123 3456 3279 3528 3826 4164
X 1500 2000 2000 2500 2500 2500 3000 3000 3000 3000
Y 1500 1500 2000 1500 2000 2500 1500 2000 2500 3000
7
L 10
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
X
Y
L
10
Ø48,3
Service
X
466
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg 5,200 7,060 11,200 14,100 17,000 19,900 25,900
Steel Steel Steel Steel Steel Steel Steel Steel
Decks UDS Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32 Deck UDS 32
x x x x x x x
72 104 150 200 250 300 400
X 720 1040 1500 2000 2500 3000 4000
perm. p [kN/m²] 6,0 6,0 6,0 6,0 6,0 4,5 2,0
Wall Formwork
100488 100486 100355 100373 100375 100377 100820
320
71
Column Formwork
X
0,420
Slab Formwork
102605
Accessories Deck Link Plate UED Deck Link Plate UED For linking adjacent UDS decks. Ø20
160
Technical Data Load Class 3, 2.0 kN/m2.
Access Decks UAL with ladder Access Deck UAL 64 x 250/3 Access Deck UAL 64 x 300/3
Technical Data Load Class 3, 2.0 kN/m2.
2500 / 3000
74
25,300 28,600
640
114825 114812
Bridge- and Tunnel Formwork
640
2000
Climbing Systems
Access Deck UAL 64 x 200/3
Scaffolding, Stairs, Working Platforms
18,200
77
74
114811
Shoring Systems
71
Ø8
467
Plywood, SystemIndependent Accessories
0,420
Service
102605
Item no. Weight kg 103607 3,450
Ladder UEL w. Hook For attaching to Access Deck UAL without ladder or Access Deck UAL with ladder.
350
Wall Formwork
Formwork Girders
PERI UP Rosett Modular Scaffolding
213
6 x 280 = 1680
101360 101372 101373 101375 101394 101378 101379 101381
2,160 2,780 3,400 4,020 2,800 3,620 4,440 5,260
Decking Gap Fillers UD Decking Gap Filler UD 7/150 Decking Gap Filler UD 7/200 Decking Gap Filler UD 7/250 Decking Gap Filler UD 7/300 Decking Gap Filler UD 11/150 Decking Gap Filler UD 11/200 Decking Gap Filler UD 11/250 Decking Gap Filler UD 11/300 For covering gaps between 7 cm and 25 cm.
L 1486 1986 2486 2986 1486 1986 2486 2986
X 1500 2000 2500 3000 1500 2000 2500 3000
Shoring Systems
Slab Formwork
Column Formwork
2142
X L
50
101588 101591
2,300 3,160
Board Transom UHL Board Transom UHL 72 Board Transom UHL 104 Provides additional support for scaffold boards. Mounted on the Ledger UH. 761 / 1081 720 / 1040
40
Service
Plywood, SystemIndependent Accessories
30
Bridge- and Tunnel Formwork
80
60
Scaffolding, Stairs, Working Platforms
Climbing Systems
70 / 110
468
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg L 1536 2036 2536 3036 4036
X 1500 2000 2500 3000 4000
Wall Formwork
Toeboards Wood UPT-2 Toeboard Wood UPT-2 150 Toeboard Wood UPT-2 200 Toeboard Wood UPT-2 250 Toeboard Wood UPT-2 300 Toeboard Wood UPT-2 400
X L
Shoring Systems
X 720 1040 1500 2000 2500 3000
66
Scaffolding, Stairs, Working Platforms
L 706 1016 1486 1986 2486 2986
Bridge- and Tunnel Formwork
Toeboards Steel UPY Toeboard Steel UPY 72 Toeboard Steel UPY 104 Toeboard Steel UPY 150 Toeboard Steel UPY 200 Toeboard Steel UPY 250 Toeboard Steel UPY 300
Plywood, SystemIndependent Accessories
1,380 2,040 3,000 4,030 5,060 6,100
163
110526 110076 110160 110176 110208 110211
Slab Formwork
150
Column Formwork
L X
Climbing Systems
4,090 5,160 6,230 7,300 9,430
469
Service
108068 108114 108117 108120 108204
Item no. Weight kg 101579 100444 100349
3,910 7,150 9,420
End End End End
Guardrails UPX Guardrail UPX 32 Guardrail UPX 72 Guardrail UPX 104
Note With integrated toeboard.
1019 45
27
Column Formwork
1015
Wall Formwork
Formwork Girders
PERI UP Rosett Modular Scaffolding
215
570 / 890 720 / 1040
104618 101799
10,000 12,000
End Guardrails in Advance UPA End Guardrail in Advance UPA 72 End Guardrail in Advance UPA 104
Note With integrated toeboard.
520 / 840
3,860
Console Bracket UCB 36 For fitting at joints of PERI UP Rosett. 377
185
80
470
0,110 1,020
Accessories Locking Bolt Ø 48/57 Spigot ULT 32
336
100711
100478 100301 Service
144
720 / 1040
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
1050
Climbing Systems
Shoring Systems
Slab Formwork
100
246
Formwork Girders
PERI UP Rosett Modular Scaffolding Console Bracket UCB 32
523
Wall Formwork
185
Item no. Weight kg 100235 5,010
Console Bracket UCB 72 With connection for Bracket Support UCP. Slab Formwork
8,860
Shoring Systems
695
195 720
Climbing Systems
Console Bracket UCB 104 With connection for Bracket Support UCP. 180
1049
Bridge- and Tunnel Formwork
1040
Plywood, SystemIndependent Accessories
13,200
195
100149
Scaffolding, Stairs, Working Platforms
100224
Accessories Locking Bolt Ø 48/57 Spigot ULT 32
471
Service
0,110 1,020
180
100478 100301
Column Formwork
320
Item no. Weight kg 100401 7,620
Bracket Brace UCP 72/104 For increasing the load-bearing capacity of UCB 104 and UCB 72 brackets, and UHD decking transoms.
Column Formwork
Wall Formwork
Formwork Girders
PERI UP Rosett Modular Scaffolding
Shoring Systems
Slab Formwork
Ø48,3
720 1040
106965
39,300
Pavement Gantry UVG 104/240 Completely roofed over with UDS Decks.
1040
Climbing Systems
320
160
180
Ø38
112
Bridge- and Tunnel Formwork
380
500
2400
Scaffolding, Stairs, Working Platforms
1120
Ø48,3
Plywood, SystemIndependent Accessories Service
720
472
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg 100322 46,100
Pavement Gantry UVG 176/240 Completely roofed over with UDS Decks.
160
720
Wall Formwork
1760 1040
Column Formwork Slab Formwork Climbing Systems
Connection Protect Panel UPC Fixes two UDS decks in a vertical position.
Scaffolding, Stairs, Working Platforms
Ø48,3
104
80
Bridge- and Tunnel Formwork
4,740
Plywood, SystemIndependent Accessories
100583
Accessories Locking Bolt Ø 48/57 Spigot ULT 32
473
Service
0,110 1,020
659
100478 100301
Shoring Systems
112
380
500
2400
1120
Ø48,3
Item no. Weight kg 100518 100516 100503 100514
13,700 16,800 20,100 23,300
Protection Protection Protection Protection Protection
Panels UPP Panel UPP 150 x 100 Panel UPP 200 x 100 Panel UPP 250 x 100 Panel UPP 300 x 100
Wall Formwork
Formwork Girders
PERI UP Rosett Modular Scaffolding L X 1610 1500 2110 2000 2610 2500 3110 3000 Note Can be extended as required.
X
L
100580 100581
4,780 6,330
Coupler Transom Coupler Transom Coupler Transom For decking levels
UHC UHC 72 UHC 104 at any height.
Scaffolding, Stairs, Working Platforms
Climbing Systems
108
Shoring Systems
Slab Formwork
1050
100
Column Formwork
100
80
720 / 1040
104412
0,719
Guardrail Coupler UPW For mounting the Guardrail UPG on the rosette.
Note Assembly with guardrail in advance.
Plywood, SystemIndependent Accessories Service
60
177
Bridge- and Tunnel Formwork
83
474
Formwork Girders
PERI UP Rosett Modular Scaffolding Item no. Weight kg
Wall Formwork
L X Sticker 1546 1500 2046 2000 White 2546 2500 Red 3046 3000 Black 4046 4000 Note With stamped length and coloured sticker for easier identification.
Ø38
2,680
Decking Transom Spigot UES For connecting vertical components to the Decking Transom.
Note Take permissible load of the decking transom into consideration.
Shoring Systems
101576
Ø13
210
Scaffolding, Stairs, Working Platforms
Base Beam UVA 250 For free-standing and mobile scaffold units. For symetric and antimetric assembly of UP T 72/T 104 and Rosett 72, 75, 100, 104 and symetric assembly of Rosett b = 75, 100, 150, 200 and 250 cm. 2660 1040
1040
1000
1000
750
750
720
720
Ø14
390
40,700
97
720 750 1000 1040 1500 2000 2500
160
100870
Climbing Systems
330
Ø38
Slab Formwork
Column Formwork
L X
475
Bridge- and Tunnel Formwork
Guardrails UPG Guardrail UPG 150 Guardrail UPG 200 Guardrail UPG 250 Guardrail UPG 300 Guardrail UPG 400
Plywood, SystemIndependent Accessories
2,410 3,220 4,020 4,820 9,070
Service
100265 100266 100267 100268 100810
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Formwork Girders
Item no. Weight kg 101731 0,841
476 133
62
Wall Formwork
PERI UP Rosett Modular Scaffolding Ledger Bracket UHA For connecting ledger to ledger at right-angles. 30 83
Service
477
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
478
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Shoring Systems
487 487 482 488 481 488 481 481 481 486 486 486 482 482 480 480 480 480 480 480 480 480 480
Climbing Systems
Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, Ü-Marking Spacer UEC 10 Spigot ULT 32 Standard Coupler NK 48/48, galv. Starter Tube ULB 50/70 Swivel Coupling DK 38/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 60/48, galv. T-Head Bolt M14 x 63/75, galv. T-Head Bolt M14 x 75/87, galv. T-Head Bolt M14 x 98/110, galv. Tension Coupler Ø 48,3 mm Tube Connector Ø 48,3 mm Wall Insert UFI 14/100 Wall Insert UFI 14/135 Wall Insert UFI 14/70 Wall Tie UWT 110 Wall Tie UWT 140 Wall Tie UWT 170 Wall Tie UWT 220 Wall Tie UWT 270 Wall Tie UWT 45
Scaffolding, Stairs, Working Platforms
070710 070713 100750 100301 017020 100529 102400 017010 017000 710293 710702 710290 100908 100909 100697 100698 100696 100091 100093 102951 102954 102957 100088
Bridge- and Tunnel Formwork
490 488 489 483 483 483 483 483 485 485 480 486 486 486 486 481 486 483 483 484 484 483 490 487 487 487 487 487 487 487 487 487 487 485 482 482 486 485 484 484 484 490 490 490 490 490 490 490 490 490 489 487 487 480 480 480 486 480 480 480 480 480 480 480 481 487 487
Plywood, SystemIndependent Accessories
Board Retainer UPD 60 Castor UEW 12 with Spigot Castor UEW 12 with Spindle Coupler Brace UBC 150/200 Coupler Brace UBC 200/200 Coupler Brace UBC 250/200 Coupler Brace UBC 300/200 Coupler Brace UBC 72-104/200 Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, painted Cutting Cost Scaffold Tube Debris Net 2,5 x 10,0 m Debris Net 2,5 x 20,0 m Debris Net 3,0 x 10,0 m Debris Net 3,0 x 20,0 m Double Coupler NK 60/48, galv. Flanged Nut M14 - SW 19, yellow Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Hook for Scaffold Components Latt. Girder Alu ULA 50/425 HD Latt. Girder Alu ULA 50/525 HD Latt. Girder Alu ULA 50/625 HD Latt. Girder Alu ULA 70/825 HD Latt. Girder Steel ULS 50/425 Latt. Girder Steel ULS 50/525 Latt. Girder Steel ULS 50/625 Latt. Girder Steel ULS 70/525 Latt. Girder Steel ULS 70/625 Latt. Girder Steel ULS 70/825 Lid for Wire Crate Pallet 80 x 120, painted Locking Bolt Ø 48/57 Locking Pin Ø 48 Netting Tie Pallet Lifting Trolley 1500 mm Pallet RP 110 x 125, painted Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. PERI UP Assembly Certificate, CDN PERI UP Assembly Certificate, CZ PERI UP Assembly Certificate, D PERI UP Assembly Certificate, ES PERI UP Assembly Certificate, EX PERI UP Assembly Certificate, F PERI UP Assembly Certificate, PL PERI UP Assembly Certificate, PT PERI UP Assembly Certificate, TR PERI UP Scaffold Tag Plastic Sheeting UT 2.70 x 20.0 m Plastic Sheeting UT 3.25 x 20.0 m Ring Bolt UFE 12/120 Ring Bolt UFE 12/190 Ring Bolt UFE 12/90 Safety Net 6.0 x 2.0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Screw-On Coupler AK 48, galv. Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13
479
Service
101596 101858 101860 100416 100419 100422 100425 100428 065068 065016 026417 101347 101348 101349 101350 017030 710340 100660 100678 025660 025670 100719 100452 101656 101657 101658 101659 100330 100336 100339 100185 100183 100852 065067 100478 111053 100871 061510 106939 103434 103429 113835 113839 113833 113836 113834 113829 113838 113837 115739 113832 102021 102023 100694 100695 100693 026530 026411 026412 026413 026414 026419 026418 026415 017040 070711 070712
Slab Formwork
PERI UP Independent Accessories
Formwork Girders Wall Formwork
PERI UP Independent Accessories Item no. Weight kg 100088 100091 100093 102951 102954 102957
1,920 4,680 5,870 7,060 9,050 11,000
Wall Ties UWT Wall Tie UWT 45 Wall Tie UWT 110 Wall Tie UWT 140 Wall Tie UWT 170 Wall Tie UWT 220 Wall Tie UWT 270
L 488 1138 1438 1738 2238 2738
Ø48,3
20
Column Formwork Slab Formwork
0,169 0,190 0,250
100696 100697 100698
0,007 0,009 0,010
026415 026417 026411 026412 026413 026414 026419 026418
3,550 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
100693 100694 100695
Plywood, SystemIndependent Accessories Service
18
L
Ring Bolts UFE Ring Bolt UFE 12/90 Ring Bolt UFE 12/120 Ring Bolt UFE 12/190 For assembling the Wall Tie UWT. Expansion bolt UFI 14 required.
Wall Wall Wall Wall
Safety Instructions With marking for screw-in depth.
Inserts UFI Insert UFI 14/70 Insert UFI 14/100 Insert UFI 14/135
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0
L
m m m m m m
1000 2000 3000 4000 5000 6000
L Ø48,3x3,2
480
85
Formwork Girders
PERI UP Independent Accessories Standard Coupler NK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
Wall Formwork
(9)
Item no. Weight kg 017020 1,120
SW 19
Double Coupler NK 60/48, galv. For Scaffold Tubes Ø 48 mm and Ø 60 mm.
Note Wrench size SW 19.
Column Formwork
1,400
( 9)
017030
Swivel Coupling DK 38/48, galv. For Scaffold Tubes Ø 48 mm and Ø 38 mm.
Note Wrench size SW 19.
Shoring Systems
SW 19
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
Climbing Systems
1,400
Scaffolding, Stairs, Working Platforms
(27)
017010
SW 19
1,540
Swivel Coupling DK 60/48, galv. For Scaffold Tubes Ø 48 mm and Ø 60 mm.
Note Wrench size SW 19.
Bridge- and Tunnel Formwork
(26)
017000
0,850
Screw-On Coupler AK 48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 30, SW 19. SW 30
( 12)
017040
Plywood, SystemIndependent Accessories
SW 19
SW 19
481
Service
1,100
(27)
102400
Slab Formwork
SW 19
Item no. Weight kg 100908 1,400
Tension Coupler Ø 48,3 mm For tensile-proof connections of scaffold tubes Ø 48 mm.
.
1,000
100909
1,000
Accessories Tube Connector Ø 48,3 mm Tube Connector Ø 48,3 mm Tensile-proof connection of scaffold tubes Ø 48 mm. Ø38 87
Ø37
197
100908
1,400
100750
1,310
Climbing Systems
Shoring Systems
87
Ø48
100909
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
PERI UP Independent Accessories
Accessories Tension Coupler Ø 48,3 mm Spacer UEC 10 For connecting Standards Ø 48 mm to external and internal corners.
Note Wrench size SW 19.
100
148
0,110
Locking Bolt Ø 48/57 As tension-proof connection of standards.
Note Not for suspended scaffold. Not for coupling of lattice girders.
48
100478
78
111053
0,059
44
Locking Pin Ø 48 As tension-proof connection of standards. Ø10
49
Service
Ø9
482
68
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
SW 19
25
Formwork Girders
PERI UP Independent Accessories Item no. Weight kg 100719 0,060
Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. As tension-proof connection of standards for suspended scaffold or lattice girders.
Note Wrench Size SW 16.
Wall Formwork
70 SW 16 M10
X 720/1040 1500 2000 2500 3000
Y 2000 2000 2000 2000 2000
Column Formwork
L 1828 2305 2657 3052 3473
Slab Formwork
Coupler Braces UBC Coupler Brace UBC 72-104/200 Coupler Brace UBC 150/200 Coupler Brace UBC 200/200 Coupler Brace UBC 250/200 Coupler Brace UBC 300/200 For special applications. For connecting to scaffold tube Ø 48 mm.
Y
L
Shoring Systems
8,040 9,740 11,000 12,400 13,900
25
100428 100416 100419 100422 100425
Complete with 1 pc. 100707 Lashing 25 x 5750 mm 6 pc. 100706 Tube l = 1.0 m Note 36 T-Frame UVT with Spigot Tube UV 165 or Base Frame UVF with L-Frame UVL. Safety Instructions Load-carrying capacity 1.2 t. Follow Instructions for Use at all times! 1020 / 1340
775
Plywood, SystemIndependent Accessories
Frame Pallets USP, galv. Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. For stacking and transportation of PERI UP scaffold components.
1085 / 1405
832
483
Service
60,400 65,600
590
100660 100678
Scaffolding, Stairs, Working Platforms
X
Bridge- and Tunnel Formwork
25
Climbing Systems
Ø48,3
Item no. Weight kg Pallets RP-2, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. For stacking and transporting formwork and scaffolding components.
880
1080 / 1380
680
100
Column Formwork
1280 / 1580
1200 / 1500
106939
20,100
Pallet RP 110 x 125, painted For stacking and transportation of formwork and scaffold components.
800
Safety Instructions Load-carrying capacity 750 kg. Follow Instructions for Use at all times! 973
563
408
1143
Shoring Systems
025660 025670
64,300 64,300
Hardware Boxes 80 x 120 Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted For stacking and transportation of formwork and scaffold components.
1160
Technical Data Capacity approx. 0.28 m³. Safety Instructions Load-carrying capacity 1.5 t. Follow Instructions for Use at all times! 1240
835
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
500
Scaffolding, Stairs, Working Platforms
Climbing Systems
1330
484
100
Slab Formwork
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
600
33,400 40,200
850
103434 103429
Wall Formwork
Formwork Girders
PERI UP Independent Accessories
Formwork Girders
PERI UP Independent Accessories Item no. Weight kg Crate Pallets 80 x 120 Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, painted For stacking and transportation of formwork and scaffold components.
Technical Data Capacity approx. 0.75 m³. Safety Instructions Load-carrying capacity 1.5 t. Follow Instructions for Use at all times! 835
Slab Formwork
Lid for Wire Crate Pallet 80 x 120, painted For closing crate pallets 80 x 120 or mesh pallets 80 x 120.
Climbing Systems
Pallet Lifting Trolley 1500 mm For moving pallets and crate pallets.
Technical Data Forklift arm length 1500 mm, forklift arm width 520 mm, stroke range 85 - 195 mm. Safety Instructions Load-carrying capacity 2.0 t. Follow Instructions for Use at all times!
Scaffolding, Stairs, Working Platforms
110,000
.
Bridge- and Tunnel Formwork
061510
Shoring Systems
37
745
1100
Plywood, SystemIndependent Accessories
9,310
798
065067
Column Formwork
970
1240
Wall Formwork
86,000 86,100
485
Service
065068 065016
Formwork Girders
PERI UP Independent Accessories Item no. Weight kg 710340 0,032
Flanged Nut M14 - SW 19, yellow Substitute nut for scaffold tube couplings etc.
Note Wrench size SW 19.
Column Formwork
Wall Formwork
M14
SW 19
710293 710702 710290
0,083 0,096 0,115
T-Head T-Head T-Head T-Head
Bolts M14, galv. Bolt M14 x 63/75, galv. Bolt M14 x 75/87, galv. Bolt M14 x 98/110, galv.
L 63 75 98
12,5
710340
0,032
026530
2,400
Accessories Flanged Nut M14 - SW 19, yellow Safety Net 6.0 x 2.0 m Safety netting made of high-strength polypropylene for safety scaffolding. 5 mm thick, knotless.
Technical Data Mains Type A2 according to DIN EN 1263-1. Energy consumption 4,2 kJ. Colour: green. Approved by the Bau-BG (Employers´ Liability Insurance Association for the building industry).
100
2000
Climbing Systems
Shoring Systems
Slab Formwork
L
100
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
6000
101347 101348 101349 101350
1,800 3,600 2,160 4,320
100871
0,002
486
Debris Debris Debris Debris Debris
Nets Net 2,5 Net 2,5 Net 3,0 Net 3,0
x x x x
10,0 m 20,0 m 10,0 m 20,0 m
Netting Tie Length 300 mm. Minimum bonding strength 23 KP.
Formwork Girders
PERI UP Independent Accessories Item no. Weight kg
070710 070711 070712 070713
0,000 0,000 0,000 0,000
100330 100336 100339 100185 100183 100852
41,700 50,900 60,200 54,800 64,500 83,600
Plastic Sheetings UT Plastic Sheeting UT 2.70 x 20.0 m Plastic Sheeting UT 3.25 x 20.0 m
Wall Formwork
13,500 16,000
Softwood Timbers DIN 4074-1 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, Ü-Marking
Column Formwork
102021 102023
Y 500 500 500 700 700 700
Slab Formwork
X 4000 5000 6000 5000 6000 8000
L X
X 4000 5000 6000 8000
Y 500 500 500 700
Scaffolding, Stairs, Working Platforms
L 4250 5250 6250 8250
L X Ø48,3
Bridge- and Tunnel Formwork
Lattice Girders Alu ULA Latt. Girder Alu ULA 50/425 HD Latt. Girder Alu ULA 50/525 HD Latt. Girder Alu ULA 50/625 HD Latt. Girder Alu ULA 70/825 HD To bridge openings. For system-free application.
Plywood, SystemIndependent Accessories
18,400 22,500 26,500 37,400
Y
101656 101657 101658 101659
Climbing Systems
Y
Ø48,3
Shoring Systems
L 4250 5250 6250 5250 6250 8250
487
Service
Lattice Girders Steel ULS Latt. Girder Steel ULS 50/425 Latt. Girder Steel ULS 50/525 Latt. Girder Steel ULS 50/625 Latt. Girder Steel ULS 70/525 Latt. Girder Steel ULS 70/625 Latt. Girder Steel ULS 70/825 To bridge openings. For system-free application.
Formwork Girders
PERI UP Independent Accessories Item no. Weight kg 100529 5,260
Starter Tube ULB 50/70 For Lattice Girder ULS and ULA.
Note Only use with system-free girder assembly. 300
920
Ø48,3
Column Formwork
760
Wall Formwork
160
128
1,020
Spigot ULT 32 Lose pin for connecting scaffold tubes Ø 48.3 x 3.2 mm, e.g. top standards and lattice girders.
Ø38
320
0,059 0,060
101858
7,000
Accessories Locking Pin Ø 48 Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Castor UEW 12 with Spigot As steerable castor for mobile scaffolds. Wheel centre red.
Technical Data Permissible load 12 kN.
Ø 38
261 322
100719 100478
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
411
Ø16
Ø13
150
111053 100719
Climbing Systems
Shoring Systems
Slab Formwork
100301
488
0,060 0,110
Accessories Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Locking Bolt Ø 48/57
110
Formwork Girders
PERI UP Independent Accessories Castor UEW 12 with Spindle As steerable castor for mobile scaffolds. Wheel centre red.
Technical Data Permissible load 12 kN.
Wall Formwork
Item no. Weight kg 101860 7,500
261
Column Formwork
761
500
38
Slab Formwork Shoring Systems
PERI UP Scaffold Tag To cordon off scaffolding areas not yet authorized for use. With the exception of inserting the PERI UP Assembly Certificate.
.
Climbing Systems
0,035
Scaffolding, Stairs, Working Platforms
113832
Accessories Handle Lock UJS Quick Jack Nut 38, galv.
Bridge- and Tunnel Formwork
1,030 0,421
Plywood, SystemIndependent Accessories
100863 710071
110
489
Service
322
Formwork Girders
Item no. Weight kg 113833 113834 113829 113835 113836 113837 113838 113839 115739
0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005 0,005
Column Formwork
Wall Formwork
PERI UP Independent Accessories PERI UP Assembly Certificates, TR PERI UP Assembly Certificate, D PERI UP Assembly Certificate, EX PERI UP Assembly Certificate, F PERI UP Assembly Certificate, CDN PERI UP Assembly Certificate, ES PERI UP Assembly Certificate, PT PERI UP Assembly Certificate, PL PERI UP Assembly Certificate, CZ PERI UP Assembly Certificate, TR Inserted into the PERI UP document pocket.
Note Front side: Assembly report for release of scaffolding. Rear side: Test report
Assembly Certificate
Inspection Record
.
Inspection by qualified person only
To be completed by the supervisor Installation location
Important
Position
Any modifications made to the scaffold, e.g. removal of anchors, may only be carried out by the scaffolder. Date
Time
Client Scaffolder Date Signature
Signature
Working scaffold according to EN 12811, for Load Class 2
kN/m
1-2: maintenance work 1,50 kN/m2 3: paint/plaster work 2,00 kN/m2 4-6: brickwork ≥ 2,00 kN/m2
Width Class W W06 0,6 ≤ w ≤ 0,9m W09 0,9 ≤ w ≤ 1,2m W12-W24 w ≥ 1,2m
Handing-Over Certificate
Shoring Systems
Slab Formwork
To be completed by the inspecting person
Name Signature Date, Time Remarks Scaffold is no longer authorized for use: Date:
101596
1,500
© 2007 PERI GmbH All Rights Reserved 113834
Board Retainer UPD 60 For securing planks to prevent lifting and sliding. 693 30
7 x 70 = 490
80
0,500
Hook for Scaffold Components
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
.
490
220
100452
65
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø5
Service
491
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
492
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
499 497 503 499 499 502 496 495 495 496 496 495 495 495 495 495 495 499 499 500 500 497 497 494 502 501 497 497 497 497 497 497 497 497 503 500 502 501 500 500 501 498 497 498 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 494 498 498
Plywood, SystemIndependent Accessories
Adjusting Unit VARIOKIT Angle Connector RCS/SRU Articulated Spanner RCS DW 15 Bolt Ø 21 x 120 Bolt Ø 26 x 120 Bracing Shoe RCS DW 15 Climbing Rail Angle Connector RCS Climbing Rail Connector RCS 33 Climbing Rail Connector RCS 40 Climbing Rail Connector RCS 79 Climbing Rail Connector RCS 97 Climbing Rail RCS 148 Climbing Rail RCS 248 Climbing Rail RCS 348 Climbing Rail RCS 498 Climbing Rail RCS 748 Climbing Rail RCS 998 Compensation Washer 16, yellow galv Compensation Washer 20, galv. Cotter Pin 4/1, galv. Cotter Pin 5/1, galv. Counterplate RCS DW 20 Counterplate RCS DW 26 Extension VARIO 24 U120 Eye Nut RCS DW 15 Guardrail Post RCS/SRU 184 Heavy Duty Spindle SLS 100/180 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 200/300 Heavy Duty Spindle SLS 260/360 Heavy Duty Spindle SLS 320/420 Heavy Duty Spindle SLS 380/480 Heavy Duty Spindle SLS 40/80 Heavy Duty Spindle SLS 80/140 Hex. Nut DW 15 SW 30/50, galv. Hook Strap Uni HBU 24-26 U200 Lifting Beam RCS 10 t Platform Beam RCS/SRU 113 Scaffold Tube Adapter RCS Ø 48 Spacer M20-82 Spacer M24-82 Spindle Adapter SKS/RCS Spindle Adapter SLS/RCS Spindle Spreader HD Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-140 l = 4.97 m Tie Yoke Head SRU Universal Coupling UK 70
493
Service
113933 111283 115375 104031 111567 114997 111382 109743 111833 113744 111390 114166 109469 109470 109471 109472 109610 024000 024180 018060 022230 114082 114084 104027 115378 114328 101774 101776 101778 101779 109726 109785 111035 101773 030070 111806 112986 114301 110084 110022 110023 116039 110477 112816 103868 103871 103874 103877 103886 103889 103898 103892 103929 103903 103906 103915 103918 103922 103925 103928 103943 110756 103737
103868 103871 103874 103877 103886 103889 103898 103892 103929 103903 103906 103915 103918 103922 103925 103928 103943
18,100 24,200 30,900 38,100 44,700 52,000 58,600 65,600 72,000 81,000 92,600 106,000 119,000 135,000 146,000 159,000 157,000
Steel Walers Universal SRU Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-140 l = 4.97 m Universal steel waler profile U 120 and U 140 used as waling for girder wall formwork and for diverse special applications. With adjustable spacers.
L 722 972 1222 1472 1722 1972 2222 2472 2722 2972 3472 3972 4472 4972 5472 5972 4972 Technical Data SRU 120 Wy = 121,4 cm³, Iy = 728 cm4 SRU 140 Wy = 172,8 cm³, Iy = 1210 cm4
L
7 x 60
37,5 52,5
Shoring Systems
51
48,5
125
125
198,5
125
X
52
120
Scaffolding, Stairs, Working Platforms
70
52
162
104027
7,610
Extension VARIO 24 U120 For assembly on Steel Waler SRU.
172
Complete with 4 pc. 710252 Bolt ISO 4017 M16 x 50-8.8, galv. 4 pc. 104024 Nut ISO 7040 M16-8, galv. 4 pc. 710880 Washer DIN 434, M18, galv. Technical Data Wy = 121.4 cm³, Iy = 728 cm4
65
120
53
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
112
19
Climbing Systems
3 x 65
17
36
Service
125
140
Formwork Girders Wall Formwork
Item no. Weight kg
Slab Formwork
Column Formwork
Civil Construction Set VARIOKIT (Basic Comp.)
M 16
494
236
52 162
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.) Item no. Weight kg
M 20
M 24
Ø25
80
Scaffolding, Stairs, Working Platforms
Climbing Rail Connector RCS 40 For an articulated connection or doubling of the RCS Climbing Rails. Ø21 215
Ø26
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
78
12,700
Shoring Systems
Complete with 3 pc. 710894 Bolt Ø 25 x 180, geomet. 6 pc. 018060 Cotter Pin 4/1, galv.
403
111833
200
Climbing Systems
Climbing Rail Connector RCS 33 For an articulated connection of RCS Climbing Rails.
Slab Formwork
302,5
82
110
325
6,520
125 125
109743
Column Formwork
Ø26
125
Ø21
L
N x 500
Wall Formwork
L 1480 2480 3480 4980 7480 9980 Technical Data Wy = 357.6 cm³, Iy = 3576 cm4
495
Service
Climbing Rails RCS Climbing Rail RCS 148 Climbing Rail RCS 248 Climbing Rail RCS 348 Climbing Rail RCS 498 Climbing Rail RCS 748 Climbing Rail RCS 998 Steel profile for all-purpose use of climbing application or civil constructions. With Spacer M 20-82 and M 24-82.
232
78,300 130,000 183,000 262,000 394,000 525,000
177,5
114166 109469 109470 109471 109472 109610
250
Climbing Rail Connector RCS 79 For rigid (bending moment limited) connection of Climbing Rail RCS.
125
45 45
785
Item no. Weight kg 113744 22,600
Wall Formwork
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
250
Ø26
80
180
Column Formwork
Ø21
32,800
Slab Formwork
111390
Climbing Rail Connector RCS 97 For rigidly connecting the Climbing rail RCS. Complete with connection for the Heavy-Duty Spindle SLS.
Ø26
965
110 90
78
300
111382
35,200
Climbing Rail Angle Connector RCS For rigidly connecting the Climbing Rail RCS at right-angles, for supporting frame construction or as bracket. With connection for the Heavy-Duty Spindle SLS and Tie Rod Cylinder Yoke SRU.
Ø26
Plywood, SystemIndependent Accessories
496
719
Bridge- and Tunnel Formwork
Ø21
625
375
Ø62
62
719
Service
7 x 125 = 875
52
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
6 x 125 = 750
Ø21
78
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
4x62,5=250 125
Wall Formwork
335
250
62,5
52
Angle Connector RCS/SRU For right-angled connection of Steel Waler SRU to the Climbing Rail RCS and for attaching guardrail posts to Steel Waler SRU.
125
Item no. Weight kg 111283 9,890
64 80
Column Formwork
455
Heavy Duty Spindles SLS Heavy Duty Spindle SLS 40/80 Heavy Duty Spindle SLS 80/140 Heavy Duty Spindle SLS 100/180 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 200/300 Heavy Duty Spindle SLS 260/360 Heavy Duty Spindle SLS 320/420 Heavy Duty Spindle SLS 380/480 Used as adjustable spindle for truss beams made of Steel Walers SRU and Climbing Rails RCS.
A min. L max. L 344 400 800 746 800 1400 946 1000 1800 1346 1400 2400 1944 2000 3000 2544 2600 3600 3144 3200 4200 3744 3800 4800 Note Permissible load see PERI Design Tables.
Slab Formwork
12,000 14,300 17,900 24,330 31,800 37,900 44,300 50,500
Ø21
48,3
89
A
Shoring Systems
111035 101773 101774 101776 101778 101779 109726 109785
Ø25 / Ø31,5
Scaffolding, Stairs, Working Platforms
Counterplates RCS Counterplate RCS DW 20 Counterplate RCS DW 26 Counterplate with centring for anchoring through the Climbing Rail RCS.
140
2,860 4,280
80
114082 114084
max L
Climbing Systems
min L
Complete with 1 pc. 104031 Bolt Ø 21 x 120 1 pc. 018060 Cotter Pin 4/1, galv. Ø21
Plywood, SystemIndependent Accessories
Spindle Adapter SLS/RCS For connecting the Heavy-Duty Spindle SLS to the Climbing Rail RCS.
Ø26 Ø21 80
497
Service
3,990
160
110477
Bridge- and Tunnel Formwork
22 / 35
Item no. Weight kg 116039 4,910
Spindle Adapter SKS/RCS For connecting the Compression Spindle SKS to the Climbing Rail RCS.
Complete with 1 pc. 111567 Bolt Ø 26 x 120 1 pc. 022230 Cotter Pin 5/1, galv.
Column Formwork
160
Ø26
Wall Formwork
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
Ø26
Ø 80
112816
12,200
Spindle Spreader HD For connecting spindles or Climbing Rail RCS transversely to the Main Beam HDT.
Complete with 2 pc. 714093 Bolt ISO 4014 M16 x 70-8.8, galv. 2 pc. 710229 Nut ISO 4032 M16-8, galv. 2 pc. 711074 Washer ISO 7089 200 HV, A 16, galv. 2 pc. 112815 Clamping Plate M16 Nova Grip
182
Ø22
110756
7,980
Tie Yoke Head SRU For mounting in the Steel Waler SRU. Suitable for Tie Rod DW 15.
163
103737
10,800
48
Universal Coupling UK 70 For a rigid connection of Steel waler SRU and for connecting Heavy-Duty Spindles SLS. 125
21
685
104031 018060
498
0,462 0,030
Accessories Bolt Ø 21 x 120 Cotter Pin 4/1, galv.
187,5 62,5
48
210
Scaffolding, Stairs, Working Platforms
198
Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories
180
Complete with 2 pc. 105400 Bolt Ø 20 x 140, galv. 2 pc. 018060 Cotter Pin 4/1, galv. 2 pc. 770013 Split Pin ISO 8752 8 x 70, galv.
62,5 187,5
Service
56
400
Climbing Systems
Shoring Systems
Slab Formwork
Ø26 304
50
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.) Complete with 3 pc. 104031 Bolt Ø 21 x 120 3 pc. 022230 Cotter Pin 5/1, galv. Note Wrench size SW 30. 25
621 SW 30
234
Ø22
SW 30
125 250
0,131 0,126
46
250
Compensation Washers, galv. Compensation Washer 16, yellow galv. Compensation Washer 20, galv. For assembling in the VKZ holes.
Slab Formwork
024000 024180
Wall Formwork
Adjusting Unit VARIOKIT For an articulated connection of Steel Walers SRZ and SRU. With integrated adjustment feature.
Column Formwork
Item no. Weight kg 113933 17,100
Ø16,5 / Ø20,5
0,303 0,184
104031
0,462
Accessories Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M16 x 100-8.8, galv. Bolt Ø 21 x 120 For different connections.
Climbing Systems
024910 710219
6,5
6
Shoring Systems
Ø 58
207 122 Ø6
0,030
111567
0,729
Accessories Cotter Pin 4/1, galv. Bridge- and Tunnel Formwork
018060
Scaffolding, Stairs, Working Platforms
Ø21
Bolt Ø 26 x 120 For different connections. 207 122
Plywood, SystemIndependent Accessories
Ø6
Ø26
0,033
Accessories Cotter Pin 5/1, galv.
499
Service
022230
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.) Item no. Weight kg 018060 0,030
Cotter Pin 4/1, galv. For pins up to Ø 25 mm.
022230
0,033
Cotter Pin 5/1, galv. For pins Ø 25 mm to Ø 40 mm. Ø5
111806
0,945
Hook Strap Uni HBU 24-26 U200 For assembling the GT 24 Girder on the Climbing Rail RCS.
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Ø4
min 240 max 260
80
138
2,310
Ø48 145
Bridge- and Tunnel Formwork
110022
0,493
Spacer M20-82 Spacer for Climbing Rails RCS.
78
Complete with 1 pc. 104477 Bolt ISO 4014 M20 x 120-8.8, galv. 1 pc. 781053 Nut ISO 7042 M20-8, galv.
82
Service
Ø25
27
Plywood, SystemIndependent Accessories
Complete with 1 pc. 017040 Screw-On Coupler AK 48, galv. 1 pc. 710894 Bolt Ø 25 x 180, geomet. 2 pc. 018060 Cotter Pin 4/1, galv.
122
Scaffold Tube Adapter RCS Ø 48 For assembling scaffold tubes Ø 48 mm on Climbing Rails RCS.
159
110084
Scaffolding, Stairs, Working Platforms
Climbing Systems
232
500
SW 30
Complete with 1 pc. 109612 Bolt ISO 4014 M24 x 130-8.8, galv. 1 pc. 105032 Nut ISO 7042 M24-8, galv. Note Wrench size SW 36.
Wall Formwork
Spacer M24-82 Spacer for Climbing Rails RCS.
34
Item no. Weight kg 110023 0,910
SW 36
Column Formwork
82
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
Ø21
Ø10
125
125
Ø21 M 20
650
215
Complete with 2 pc. 114727 Bolt ISO 4017 M20 x 100-8.8, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv.
M 20x100
max 70
45
Scaffolding, Stairs, Working Platforms
Ø21
80
Bridge- and Tunnel Formwork
M 20
Plywood, SystemIndependent Accessories
Guardrail Post RCS/SRU 184 For assembly of the guardrail on the Platform Beam RCS/SRU.
1840
16,600
14 x 125 = 1750
114328
Accessories Guardrail Post RCS/SRU 184
5 x 250 = 1250
16,600
76
114328
50 98
1126
Shoring Systems
Ø21
Slab Formwork
Complete with 2 pc. 104031 Bolt Ø 21 x 120 2 pc. 022230 Cotter Pin 5/1, galv. 2 pc. 706458 Bolt ISO 4017 M20 x 40-8.8, galv. 2 pc. 781053 Nut ISO 7042 M20-8, galv.
Climbing Systems
Platform Beam RCS/SRU 113 For assembling cantilvered platforms on Steel Walers SRU or Climbing Rails RCS.
501
Service
17,100
337
114301
Item no. Weight kg 112986 153,000
Lifting Beam RCS 10 t For moving RCS climbing units.
Technical Data Bearing capacity 10 t. Safety Instructions Follow Instructions for Use at all times.
Column Formwork
6763
Wall Formwork
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.)
16 x 125 = 2000 max 5000
Shoring Systems
Slab Formwork
min 2875
1,110
Climbing Systems
115378
64
Ø26,5 DW 15
Scaffolding, Stairs, Working Platforms
107
104031 111567
0,462 0,729
114997
7,160
Plywood, SystemIndependent Accessories
40
Accessories Bolt Ø 21 x 120 Bolt Ø 26 x 120 Bracing Shoe RCS DW 15 For anchoring the bracing with DW 15 to the building slab. Fixation with anchor system M24 or corresponding dowels.
Complete with 1 pc. 104031 Bolt Ø 21 x 120 1 pc. 018060 Cotter Pin 4/1, galv. Note Permissible load: see PERI Product Information. 230
Ø25 Ø23
78
130
Ø21x120
Ø32
Service
310
502
200
12
Bridge- and Tunnel Formwork
Eye Nut RCS DW 15 As an articulated connection to the Climbing Rail RCS, Steel Waler SRU for bracing with DW 15.
Formwork Girders
Civil Construction Set VARIOKIT (Basic Comp.) Note Wrench size SW 30. Technical Data Permissible load 90 kN.
Wall Formwork
Hex. Nut DW 15 SW 30/50, galv. For anchoring with Tie Rod DW 15 and B 15.
50 SW 30 DW 15
Column Formwork
Articulated Spanner RCS DW 15 For tensioning and as an articulated connection to the Climbing Rail RCS, Steel Waler SRU or Bracing Shoe RCS for bracing with DW 15. Ø26,5
125
6,100
110
115375
Ø20
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Accessories Bolt Ø 21 x 120 Bolt Ø 26 x 120 Hex. Nut DW 15 SW 30/50, galv.
Bridge- and Tunnel Formwork
0,462 0,729 0,222
40
Plywood, SystemIndependent Accessories
104031 111567 030070
Slab Formwork
150 265
503
Service
Item no. Weight kg 030070 0,222
Service
504
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
GKB Cantilevered Parapet Platform
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
515 514 514 514 514 515 513 512 506 506 515 509 512 506 506 513 513 507 507 507 508 508 508 512 516 508 508 513 509 510 511 517 515 515 516 516 516 516
Plywood, SystemIndependent Accessories
Anchor Positioning Stud M 24, galv. Anchor Sleeve M24 Anchor Sleeve M24, galv. Anchor Sleeve M24, Special, Stainless Steel Cone for Bolt Anchor Sleeve M24 Cone FRC for Anchor Sleeve F.H. Bolt DIN 603 M8 x 90 MU, galv. GKB Abutment Bracket 180 GKB Abutment Platform 180 x 120 GKB Abutment Platform 180 x 240 GKB Anchor Bolt M 24 x 200/10° GKB Board Formwork 140 x 120 GKB Cantilever Parapet Bracket 180 GKB Cantilever Parapet Platform 180 x 120 GKB Cantilever Parapet Platform 180 x 240 GKB Handrail Post 115° GKB Handrail Post 90°/160 GKB Protection Board 120 GKB Protection Board 240 GKB Protection Board 90/120 GKB Side Formwork 60 x 120 GKB Side Formwork 60 x 245 GKB Side Formwork Beam GKB Side Formwork Bracket GKB Socket M24/15-35 GKB Soffit Formwork 45 x 120 GKB Soffit Formwork 45 x 245 GKB Soffit Formwork Beam GKB Spindle for Cantilever Slab Formwork GKB Work Cage GKB Work cage protection panel Guardrail Post GKB Plug 32 mm Fibre Reinforced Concrete Plug Ø 26 mm for Bolt Anchor Sleeve M24 Ratchet Spanner SW 24 "Combi" Ratchet Wrench 1/2" Socket SW 24-1/2" Socket SW 36-3/4"
505
Service
026420 026230 102111 108360 026240 116233 750076 102217 102220 102219 102394 102195 102327 102185 102184 102396 102395 102187 102186 102188 102778 102779 102329 102822 102317 102193 102190 102328 102196 102197 104181 114299 116234 026250 021790 072180 102784 102785
Item no. Weight kg 316,000 259,000
GKB Cantilever Parapet Platforms GKB Cantilever Parapet Platform 180 x 240 GKB Cantilever Parapet Platform 180 x 120 Ready-to-use platform for cantilvered parapet up to max. b = 45 cm and max. h = 60 cm.
Complete with 1 pc. 102492 Bolt Ø 16 x 200 4 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24. Technical Data Permissible load 150 kg/m2.
SW 24
Ø16x200
660
102184 102185
Wall Formwork Column Formwork
SW 24
102219 102220
268,000 221,000
GKB Abutment Platforms GKB Abutment Platform 180 x 240 GKB Abutment Platform 180 x 120 Ready-to-use platform for cantilvered parapet in the abutment area up to max. b = 45 cm, max. h = 60 cm.
Complete with 2 pc. 102492 Bolt Ø 16 x 200 2 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24. Technical Data Permissible load 150 kg/m2.
Ø16x200
1185
SW 24
155
284
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
575 / 287,5
Slab Formwork
1250 / 625
575 / 287,5
2186
1250 / 625 575 / 287,5
Plywood, SystemIndependent Accessories Service
506
2400 / 1200
575 / 287,5
Bridge- and Tunnel Formwork
1820
2400 / 1200
Formwork Girders
GKB Cantilevered Parapet Platform
Formwork Girders
GKB Cantilevered Parapet Platform
Wall Formwork
GKB Protection Board 240 Completely pre-assembled. As guardrail with GKB.
575
1250
575
Column Formwork
1893
348
GKB Protection Board 120 Completely pre-assembled. As guardrail with GKB.
Shoring Systems
50,400
287,5
625
287,5
Climbing Systems
1893
102187
Slab Formwork
2400
348
1200
Scaffolding, Stairs, Working Platforms
GKB Protection Board 90/120 Completely pre-assembled. As guardrail with GKB for forming electrical protection slabs.
25°
625 1200
287,5
Bridge- and Tunnel Formwork
287,5
1204 1960
Plywood, SystemIndependent Accessories
94,100
1772
102188
507
Service
Item no. Weight kg 102186 77,100
Item no. Weight kg 102778 102779
33,700 54,800
GKB Side Formwork GKB Side Formwork 60 x 120 GKB Side Formwork 60 x 245 Ready-to-use formwork with open formwork for cantilevered parapets up to max. b = 45 cm, h = 60 cm.
623
Wall Formwork Column Formwork
600 / 287,5
19,400
GKB Side Formwork Beam For supporting and aligning the GKB protection board.
Slab Formwork
102329
Shoring Systems
688
Ø16x200
Climbing Systems
min 35 max 330
Ø17
58,800 85,100
GKB Soffit Formwork GKB Soffit Formwork 45 x 120 GKB Soffit Formwork 45 x 245 Ready-to-use formwork with open formwork for cantilevered parapets up to max. b = 45 cm, h = 60 cm.
Complete with 6 pc. 102492 Bolt Ø 16 x 200 6 pc. 018060 Cotter Pin 4/1, galv.
600 / 287,5
102193 102190
508
744 623
523
200 / 160
600 / 287,5
Plywood, SystemIndependent Accessories
1250 / 625
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
160
Complete with 3 pc. 102492 Bolt Ø 16 x 200 3 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24.
SW 24 4x30=120
Service
600 / 287,5
1250 / 625 2450 / 1200
2450 / 1200
Formwork Girders
GKB Cantilevered Parapet Platform
Formwork Girders
GKB Cantilevered Parapet Platform
Wall Formwork
GKB Board Formwork 140 x 120 Ready-to-use formwork with open formwork for electrical protection slabs. In connection with the GKB Cantilevered Parapet Platform 120 x 180.
625
Column Formwork
287,5
1200
287,5
Item no. Weight kg 102195 119,000
371 210
Slab Formwork Shoring Systems
Complete with 2 pc. 102492 Bolt Ø 16 x 200 2 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24. 226
Climbing Systems
Ø16x200
SW 24
200
Scaffolding, Stairs, Working Platforms
GKB Spindle for Cantilever Slab Formwork For supporting and adjusting GKB board formwork 140 x 120.
Bridge- and Tunnel Formwork
19,000
Plywood, SystemIndependent Accessories
102196
Accessories GKB Spindle for Cantilever Slab Formwork
509
Service
19,000
min 610 max 820
102196
569
1500
Item no. Weight kg 102197 606,000
GKB Work Cage For moving completely assembled GKB units. With retractable-type fall arrester.
Complete with 2 pc. 102737 Locking Pin Left 2 pc. 102690 Clamping Spindle 1140 Safety Instructions Follow assembly instructions at all times.
Slab Formwork Climbing Systems
Shoring Systems
2559
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
1616
940
Service
Plywood, SystemIndependent Accessories
1472
510
2785
2467
Column Formwork
4304
Wall Formwork
Formwork Girders
GKB Cantilevered Parapet Platform
Formwork Girders
GKB Cantilevered Parapet Platform
Column Formwork
4304
Wall Formwork
Complete with 2 pc. 102737 Locking Pin Left 2 pc. 104190 Clamping Spindle 1940 Safety Instructions Follow assembly instructions at all times.
Shoring Systems
Slab Formwork
3585
Scaffolding, Stairs, Working Platforms
Climbing Systems
2516
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
1616
940 1472
511
Service
GKB Work cage protection panel For moving completely assembled GKB units with electrical protection walls in the area of the overhead power lines with max. height of 1.90 m. With retractable-type fall arrester.
3267
Item no. Weight kg 104181 628,000
Item no. Weight kg 102327 98,500
GKB Cantilever Parapet Bracket 180 For cantilevered parapet platforms and asembly of special platforms.
Wall Formwork
Complete with 2 pc. 102492 Bolt Ø 16 x 200 2 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24.
SW 24
Ø16x200
Column Formwork
SW 24
500
1806
102217
84,200
GKB Abutment Bracket 180 For abutment platforms and assembly of special platforms.
Complete with 1 pc. 102492 Bolt Ø 16 x 200 1 pc. 018060 Cotter Pin 4/1, galv. Note Wrench size SW 24.
245
Shoring Systems
Slab Formwork
2162
SW 24
278
1834
102822
6,340
GKB Side Form Bracket Used for side formwork.
661
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
1185
Ø16x200
Service
Plywood, SystemIndependent Accessories
228
512
97
625
490
120
Formwork Girders
GKB Cantilevered Parapet Platform
Formwork Girders
GKB Cantilevered Parapet Platform GKB Soffit Formwork Beam For the slab formwork.
Complete with 3 pc. 102492 Bolt Ø 16 x 200 3 pc. 018060 Cotter Pin 4/1, galv.
523
128
Wall Formwork
Item no. Weight kg 102328 19,200
Ø16x200
228
Column Formwork
744
11,600
GKB Handrail Post For Guardrails 240 and 120.
Climbing Systems
GKB Handrail Post 115° For Guardrails 90/120.
750076
0,040
F.H. Bolt DIN 603 M8 x 90 MU, galv. With nut.
Scaffolding, Stairs, Working Platforms
1204
60
Bridge- and Tunnel Formwork
25°
Note Spanner size SW 13. 90 M8
Plywood, SystemIndependent Accessories
21,500
60
1475
102396
Ø9
Shoring Systems
348
Slab Formwork
1660
Ø40
513
Service
102395
Formwork Girders
GKB Cantilevered Parapet Platform Item no. Weight kg 026230 1,010
Anchor Sleeve M24 To anchor platform systems.
Note Permissible load: see PERI product information. 100 8
Wall Formwork
68
120 15
Ø 31
12
026240 026250
0,026 0,005
102111
1,010
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve Anchor Sleeve M24, galv. To anchor platform systems.
Note Permissible load: see PERI product information. 100
Slab Formwork
Column Formwork
DW 20
68
8
120 15
Ø 31
DW 20
026240 026250
0,026 0,005
108360
3,300
Climbing Systems
Shoring Systems
Ø12
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve Anchor Sleeve M24, Special, Stainless Steel To anchor platform systems.
Note Permissible load: see PERI product information. L 120
15 20
min 108
12
30 M 24
026240 026250
0,026 0,005
026240
0,026
Accessories Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve Cone for Bolt Anchor Sleeve M24 Results in a concrete cover of 24 mm. 39
Service
514
50
24
Ø31
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
M 24x50
40
50
Formwork Girders
GKB Cantilevered Parapet Platform Item no. Weight kg 026250 0,005
Plug Ø 26 mm for Bolt Anchor Sleeve M24 For closing the cone for the Anchor Sleeve M24.
Ø 26
Wall Formwork
Ø 23
27
Column Formwork
Cone FRC for Anchor Sleeve Ensures a concrete cover of 30 mm. Ø 50
0,121
Ø 32
116233
Plug 32 mm Fibre Reinforced Concrete For closing the Cone made of fibre reinforced concrete.
Shoring Systems
0,033
Ø32
116234
Slab Formwork
55
20
0,123
Anchor Positioning Stud M 24, galv. For fixing the M24 anchor system if the plywood formlining is not drilled through.
Note Allen Key SW 14.
Climbing Systems
026420
60
SW 14 Ø5 M 24
GKB Anchor Bolt M 24 x 200/10° For inclinations up to 10°.
Note Permissible load: see PERI product information. Wrench size SW 24.
Bridge- and Tunnel Formwork
1,980
200 100
Plywood, SystemIndependent Accessories
102394
Accessories Allan Key SW 14, long Nail 3 x 80
SW 24 M 24
515
Service
0,445 0,005
Ø 75
027212 710312
Scaffolding, Stairs, Working Platforms
40
Formwork Girders
GKB Cantilevered Parapet Platform Item no. Weight kg 102317 4,080
GKB Socket M24/15-35 For subsequent installation of anchors.
Note Permissible load: see PERI product information. Wrench size SW 55.
Wall Formwork
400 min 130 max 360
M 24
120
M 36
Ø10
Column Formwork
SW 55
0,560
Ratchet Wrench 1/2"
Slab Formwork
072180
Shoring Systems
300
0,095
Socket SW 24-1/2"
Scaffolding, Stairs, Working Platforms
Climbing Systems
102784
SW 24
102785
0,452
Socket SW 36-3/4"
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
SW 36
021790
1,000
Ratchet Spanner SW 24 "Combi" For adjusting RUNDFLEX elements and Cantilevered Parapet Platform GKB.
Note Wrench size SW 24. Length approx. 500 mm.
.
516
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
1437
35
Ø22
517
Column Formwork
1679
Wall Formwork
Formwork Girders
Guardrail Post GKB For fixing to the reinforcement or to the embedded anchors.
Service
80
max 242
1225
154
Item no. Weight kg 114299 11,100
679
GKB Cantilevered Parapet Platform
160
Service
518
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Plywood
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
523 523 523 523 523 523 523 523 523 523 522 522 522 523 520 520 520 520 520 520 520 520 520 520 523 521 521 521 521 521 521 522 522 520 520
Plywood, SystemIndependent Accessories
3-Ply Panel 21 mm 1500 x 500 mm (red/yell) 3-Ply Panel 21 mm 2000 x 1000 mm (yellow) 3-Ply Panel 21 mm 2000 x 500 mm (red/yell) 3-Ply Panel 21 mm 2500 x 1000 mm (yellow) 3-Ply Panel 21 mm 2500 x 1500 mm (yellow) 3-Ply Panel 21 mm 2500 x 500 mm (red/yell) 3-Ply Panel 21 mm 3000 x 1000 mm (yellow) 3-Ply Panel 21 mm 5000 x 1000 mm (yellow) 3-Ply Panel 21 mm 5000 x 2000 mm (yellow) Arauco Pine 21 mm 2500 x 1250 mm Brasil Coated Ply 21 mm 2500 x 1250 mm Chinese Coated Ply 21 mm 1250 x 2500 mm Chinese Coated Ply 21 mm 500 x 2500 mm Conifer Plywood 20 mm 2500 x 1250 mm Fin-Ply 12 mm 1500 x 3000 mm Fin-Ply 15 mm 1500 x 3000 mm Fin-Ply 18 mm 1500 x 3000 mm Fin-Ply 21 mm 1250 x 2500 mm Fin-Ply 21 mm 1500 x 2500 mm Fin-Ply 21 mm 1500 x 3000 mm Fin-Ply 30 mm 1250 x 3610 mm Fin-Ply 9 mm 1500 x 3000 mm Fin-Ply Maxi 20 mm 5400 x 2000 mm Fin-Ply Maxi 20 mm 7500 x 2700 mm FinNa-Ply 21 mm 2500 x 1250 mm PERI Beto 21 mm 1250 x 2500 mm PERI Beto 21 mm 1500 x 3000 mm PERI Beto 21 mm 625 x 2500 mm PERI Birch 21 mm 1250 x 2500 mm PERI Spruce 21 mm 2500 x 1250 mm PERI Spruce 21 mm 2500 x 500 mm Plywood 4 mm 2500 x 1250 mm Plywood 8 mm 2500 x 1250 mm Rus-Ply 21 mm 1250 x 2500 mm Rus-Ply 21 mm 1500 x 3000 mm
519
Service
050070 050190 050080 050040 052590 050000 050200 050030 052380 052839 052621 052622 052624 052800 052150 052159 052240 052260 052060 052270 052460 052095 052829 052823 052828 052821 052822 052824 052820 052830 052831 052010 052020 052261 052271
Formwork Girders
Item no. Weight kg 052460 052260 052060 052270 052240 052159 052150 052095
20,999 14,250 14,250 14,250 12,700 10,500 8,800 6,650
Fin-Ply 30, 21, 18, 15, 12, 9 mm Fin-Ply 30 mm 1250 x 3610 mm Fin-Ply 21 mm 1250 x 2500 mm Fin-Ply 21 mm 1500 x 2500 mm Fin-Ply 21 mm 1500 x 3000 mm Fin-Ply 18 mm 1500 x 3000 mm Fin-Ply 15 mm 1500 x 3000 mm Fin-Ply 12 mm 1500 x 3000 mm Fin-Ply 9 mm 1500 x 3000 mm High-grade coated plywood to meet the highest requirements.
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
.
052823 052829
14,250 14,250
Fin-Ply Maxi 20 mm Fin-Ply Maxi 20 mm 7500 x 2700 mm Fin-Ply Maxi 20 mm 5400 x 2000 mm High-grade fair-faced concrete plywood for highquality surfaces free of joints.
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Plywood
Note 15 cross-bonded birch veneers. Coated with 540 g/m² (7.50 x 2.70 m) or 540/220 g/m² (5.40 x 2.00 m) reinforced phenolic resin 540 g/m² on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
052261 052271
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
.
Rus-Ply 21 mm Rus-Ply 21 mm 1250 x 2500 mm Rus-Ply 21 mm 1500 x 3000 mm Coated plywood for smooth concrete surfaces.
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
.
Plywood, SystemIndependent Accessories Service
14,250 14,250
520
PERI Birch 21 mm 1250 x 2500 mm High-grade coated plywood.
Note 15 cross-bonded birch veneers coated with 120 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Wall Formwork
Item no. Weight kg 052820 14,250
Formwork Girders
Plywood
052824 052821 052822
11,900 11,900 11,900
PERI Beto 21 mm PERI Beto 21 mm 625 x 2500 mm PERI Beto 21 mm 1250 x 2500 mm PERI Beto 21 mm 1500 x 3000 mm Coated plywood for smooth concrete surfaces.
Note Combination mirror plywood from Finland. 11 alternate veneers of birch and spruce with birch face veneers. Phenolic resin coating 120 g/m² on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Slab Formwork
Column Formwork
.
.
Scaffolding, Stairs, Working Platforms
Note Low weight but extremely robust. 11 veneers of Nordic coniferous wood. Phenolic resin coating 120 g/m² on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Bridge- and Tunnel Formwork
PERI Spruce 21 mm PERI Spruce 21 mm 2500 x 500 mm PERI Spruce 21 mm 2500 x 1250 mm Inexpensive coated plywood.
Plywood, SystemIndependent Accessories
10,900 10,900
521
Service
052831 052830
Climbing Systems
Shoring Systems
.
Item no. Weight kg 052020 052010
6,100 2,600
Plywood 8, 4 mm Plywood 8 mm 2500 x 1250 mm Plywood 4 mm 2500 x 1250 mm Coated plywood for smooth concrete surfaces.
Wall Formwork
Formwork Girders
Plywood Note Hardwood, 3 or 5 veneers. Phenolic resin coating 120 g/m² on both sides. Edges sealed all round.
Column Formwork
.
12,000 12,000
Slab Formwork
052622 052624
Coated Plywood 21 mm Chinese Coated Ply 21 mm 1250 x 2500 mm Chinese Coated Ply 21 mm 500 x 2500 mm Inexpensive coated plywood for slab areas.
Note 13-15 poplar veneers coated on both sides with 120 g/m² phenolic resin. Edges sealed all round.
Shoring Systems
.
Climbing Systems
052621
Brasil Coated Ply 21 mm 2500 x 1250 mm Inexpensive coated plywood for slab areas.
Note Combination plywood consisting of 9 veneers with hardwood facing veneers and pine middle layer. Coated with phenolic resin 120 g/m² on both sides. Edges sealed all round.
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
.
Plywood, SystemIndependent Accessories Service
11,030
522
Item no. Weight kg 3-S Panel 21 mm 3-Ply Panel 21 mm 2000 x 1000 mm (yellow) 3-Ply Panel 21 mm 2500 x 1000 mm (yellow) 3-Ply Panel 21 mm 3000 x 1000 mm (yellow) 3-Ply Panel 21 mm 5000 x 1000 mm (yellow) 3-Ply Panel 21 mm 2500 x 1500 mm (yellow) 3-Ply Panel 21 mm 5000 x 2000 mm (yellow) Large-area plywood formlining with yellow melamine resin coating.
Note 3 x 7 mm cross-bonded spruce layers, can also be supplied with a middle layer of staves. Edges sealed all round.
Wall Formwork
10,500 10,500 10,500 10,500 10,500 10,500
10,500 10,500 10,500
3-S Formwork Panel 21 mm 3-Ply Panel 21 mm 1500 x 500 mm (red/yell) 3-Ply Panel 21 mm 2000 x 500 mm (red/yell) 3-Ply Panel 21 mm 2500 x 500 mm (red/yell) Easy-to-handle plywood formlining with red or yellow melamine resin coating.
Note E-profile steel edge for front side protection available on request.
Shoring Systems
050070 050080 050000
Column Formwork
.
Slab Formwork
050190 050040 050200 050030 052590 052380
Formwork Girders
Plywood
Note 7 to 15 veneers. Sanded surface and in part sealed on side side.
Bridge- and Tunnel Formwork
FinNa Plywood 20, 21 mm FinNa-Ply 21 mm 2500 x 1250 mm Arauco Pine 21 mm 2500 x 1250 mm Conifer Plywood 20 mm 2500 x 1250 mm High-grade shuttering plywood.
.
Plywood, SystemIndependent Accessories
10,900 11,330 9,950
523
Service
052828 052839 052800
Scaffolding, Stairs, Working Platforms
Climbing Systems
.
Service
524
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Construction Site Equipment
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
531 531 531 527 530 529 526 530 529 530 529 531 531 531 531 531 527 526 532 532 532 533 533 526 532 526 527 527 527 531 528 528 528 527 531
Plywood, SystemIndependent Accessories
Butt Strap 102/30 mm Butt Strap 170/30 mm Butt Strap 54/30 mm Cutting Cost Tie Rod DW 15/ B 15 Drying Locker Klima TS 2000 End Guardrail Frame 55 Formwork Bracket-2 Guardrail Frame RGP 120 Guardrail Post HSGP Guardrail Post RGP 120 Guardrail Post HM Concrete Scraper L = 1180, B = 102 HM Concrete Scraper L = 1180, B = 170 HM Concrete Scraper L = 1180, B = 54 HM Concrete Scraper L = 900, B = 102 HM Turnover Board 16/16 mm Peg Plug for Stopend Sleeve DW 15 Pressure Sprayer Release Agent Bio Clean, 20 L Release Agent Bio Clean, 208 L Release Agent PERI Clean, 20 L Release Agent PERI Clean, 208 L Slab Stopend Bar 105 Spray Nozzle (0,1 F 110) Stopend Sleeve DW 15 Stopend Trestle Tie Rod B 15 spec. length Tie Rod B 15 l = 0.30 m Trestle P 80 Wall Clamp 105 Wall Clamp 55 Wall Clamp 75 Wingnut Counterplate DW 15, galv. Wood Handle L = 1180 mm
525
Service
065023 065024 065022 030050 065017 065066 065062 109010 034580 108053 035700 065020 065021 065018 065019 065025 065042 065060 031520 031440 031455 031420 031435 065063 031530 065039 065040 030740 030150 065051 065046 065045 065076 030110 065026
Note Permissible load: see PERI Design Tables.
90
Slab Stopend Bar 105 For forming with vertical slab stopend formwork for up to 50 cm slab thicknesses.
7 x 80 = 560
1204
150
Item no. Weight kg 065063 6,470
Wall Formwork
Formwork Girders
Construction Site Equipment
348
138
90
034580
3,520
065062
9,820
Accessories Guardrail Post HSGP Formwork Bracket-2 For forming of small cantilevers up to 50 cm and vertical stopends up to 30 cm.
Shoring Systems
Note Permissible load: see PERI Design Tables.
716
76
457 40
100
min 15 max 488
Scaffolding, Stairs, Working Platforms
Climbing Systems
656
245
Slab Formwork
Column Formwork
Ø20
034580
3,520
065039
0,075
Accessories Guardrail Post HSGP Stopend Sleeve DW 15 Anchoring for PERI stopend systems. With nailed plugs.
Note Permissible load: see PERI Design Tables.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
92
Ø23
52
Ø 42
DW 32
065060
0,001
065060
0,001
526
Accessories Plug for Stopend Sleeve DW 15 Plug for Stopend Sleeve DW 15 For closing the Stopend Sleeve DW 15.
Item no. Weight kg 1,550 0,000 0,420
Tie Rods B15 Tie Rod B 15 spec. length Cutting Cost Tie Rod DW 15/ B 15 Tie Rod B 15 l = 0.30 m
Note Weldable! Take official approval into consideration! Technical Data Permissible load 85 kN.
Wall Formwork
030740 030050 030150
Formwork Girders
Construction Site Equipment
Column Formwork
B 15
0,799
Wingnut Counterplate DW 15, galv. For anchoring with Tie Rod DW 15 and B 15.
Note Wrench size SW 27. Technical Data Permissible load 90 kN. 96
Slab Formwork
030110
50
Shoring Systems
110
SW 27
DW 15
6,820
Stopend Trestle For forming base slabs up to 60 cm thick.
Climbing Systems
065040
Ø6
Scaffolding, Stairs, Working Platforms
600
66
140 Ø35 Ø35
200
Bridge- and Tunnel Formwork
Peg For fixing the stopend trestle in the ground.
Plywood, SystemIndependent Accessories
527
Service
25
Ø 30
1,030
max 650
Accessories Peg
25
065042
min 450
45
1,030
455
065042
83
Item no. Weight kg 065045 5,080
Wall Clamp 55 For forming strip foundations, small beams etc. For utilizing the max. concreting height of 30 cm, we recommend a distance of 1.20 m on foundations.
Wall Formwork
Formwork Girders
Construction Site Equipment
Column Formwork
300
758
max 550
6,170
Slab Formwork
065076
Wall Clamp 75 For forming strip foundations, small beams etc. For utilizing the max. concreting height of 40 cm, we recommend a distance of 1.00 m on foundations.
400
max 750
065046
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
958
Wall Clamp 105 For forming strip foundations, small beams etc. For utilizing the max. concreting height of 50 cm, we recommend a distance of 0.80 m on foundations.
500
Bridge- and Tunnel Formwork
1200
max 1050
Plywood, SystemIndependent Accessories Service
12,700
528
Formwork Girders
Construction Site Equipment Guardrail Post HSGP As guardrail for different systems.
35
Column Formwork
65
1300
1050
440
Wall Formwork
120
Item no. Weight kg 034580 3,520
15,100
End Guardrail Frame 55 Clampable end handrail for all PERI scaffold platforms and climbing systems.
560
120
Scaffolding, Stairs, Working Platforms
Guardrail Holder For mounting a fall protection. Adjustable from 20 - 420 mm.
460
30
Plywood, SystemIndependent Accessories
529
Service
311
Bridge- and Tunnel Formwork
995
65
min 20 max 420
9,790
400
35
035700
Climbing Systems
max 417
Shoring Systems
1360
1020
Slab Formwork
065066
Guardrail Post RGP 120 As guardrail on slab edges, balconies, stringers etc. 145
Item no. Weight kg 108053 6,940
1195
500
Wall Formwork
Formwork Girders
Construction Site Equipment
Ø 48,3
160
103606
0,330
109010
22,000
180
Accessories Anchor Bolt PERI MMS 20 x 130 Guardrail Frame RGP 120
1156
Shoring Systems
Slab Formwork
Column Formwork
65
065017
Scaffolding, Stairs, Working Platforms
Climbing Systems
2685
56,000
Drying Locker Klima TS 2000 Exhaust air dryer for drying wet clothes. With clock timer and continuous temperature control unit.
Technical Data Voltage 230 V, 50-60 Hz, power consumption 1500 W.
630
Service
Plywood, SystemIndependent Accessories
1900
Bridge- and Tunnel Formwork
39
595
530
Formwork Girders
Construction Site Equipment Trestle P 80 As a single trestle or in combination to form a large area scaffold. Tilt-resistant on all sides. 1000
1249
HM-Concrete Scrapers HM Concrete Scraper L = 900, B = 102 HM Concrete Scraper L = 1180, B = 54 HM Concrete Scraper L = 1180, B = 102 HM Concrete Scraper L = 1180, B = 170 Concrete scraper with ash wood handle, hardmetal reversible cutter and chamfered butt strap made of tool steel.
L 900 1180 1180 1180
B 102 54 102 170
Slab Formwork
1,200 1,400 1,800 2,200
800
Shoring Systems
B
065019 065018 065020 065021
Column Formwork
796
Wall Formwork
280
Scaffolding, Stairs, Working Platforms
Accessories HM-Concrete Scraper Butt Strap 54/30 mm Butt Strap 102/30 mm Butt Strap 170/30 mm HM Turnover Board 16/16 mm Wood Handle L = 1180 mm
Bridge- and Tunnel Formwork
0,035 0,070 0,120 0,018 1,030
Plywood, SystemIndependent Accessories
065022 065023 065024 065025 065026
Climbing Systems
L
531
Service
Item no. Weight kg 065051 18,500
Item no. Weight kg 031520 4,440
Pressure Sprayer For spraying PERI Bio Clean and PERI Clean concrete release agents. Content: 5 litres.
.
031530
0,064
031530
0,064
031440 031455
0,910 0,910
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Construction Site Equipment
Spray Nozzle (0,1 F 110) Spare part for the PERI pressure sprayer for concrete release agent.
Release Agent Bio Clean Release Agent Bio Clean, 20 L Release Agent Bio Clean, 208 L Chemical, physically-acting concrete release agent on the basis of ultra-pure, biologically degradable components. Can be used on all standard types of formwork and construction equipment. Water Hazard Class 1 (WGK 1).
Note Requirements: 50-90 m² forming area per litre. Safety Instructions Take into consideration PERI Bio Clean safety data sheet!
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
.
Plywood, SystemIndependent Accessories Service
Accessories Spray Nozzle (0,1 F 110)
532
Item no. Weight kg
Wall Formwork
Note Requirements: 50-90 m² forming area per litre. Safety Instructions See PERI Bio Clean safety data sheet.
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
.
Bridge- and Tunnel Formwork
Release Agent PERI Clean Release Agent PERI Clean, 20 L Release Agent PERI Clean, 208 L Chemical, physically-acting concrete release agent on the basis of mineral oil. Can be used on all standard types of formwork and construction equipment. Water Hazard Class 1 (WGK 1).
Plywood, SystemIndependent Accessories
0,920 0,920
533
Service
031420 031435
Formwork Girders
Construction Site Equipment
Service
534
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Accessories for Logistics
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
536 536 541 542 542 536 536 537 539 537 539 540 542 537 536 536 538 538 539 540 541 540 541 541
Plywood, SystemIndependent Accessories
Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, painted Extension GF 10 Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted Lid for Wire Crate Pallet 80 x 120, painted Palett GF 85 x 210, galv. Palett RP 80 x 110, galv. Pallet HS 120 x 90, galv. Pallet HS 150 x 90, galv. Pallet Lifting Trolley 1500 mm Pallet RP 110 x 125, painted Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. Pallet SD 150 x 225, galv. Pallet SD 150 x 75, galv. Pallet ST 100/2, galv. Stacking Device DOMINO, galv. Stacking Device GRIDFLEX, galv. Stacking Device MAXIMO, galv. Tension Strap Rail GF 125 Tension Strap Rail GF 92
535
Service
065068 065016 111392 100660 100678 025660 025670 065067 111738 111396 065080 065081 061510 106939 103434 103429 061530 061500 065050 066094 110939 115058 115385 115427
Item no. Weight kg Pallets RP-2, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. For stacking and transporting formwork and scaffolding components.
880
1080 / 1380
680
100
Column Formwork
1280 / 1580
1200 / 1500
065068 065016
86,000 86,100
Crate Pallets 80 x 120 Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, painted For stacking and transportation of formwork and scaffold components.
Shoring Systems
Slab Formwork
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
800
Technical Data Capacity approx. 0.75 m³. Safety Instructions Load-carrying capacity 1.5 t. Follow Instructions for Use at all times! 835
025660 025670
Bridge- and Tunnel Formwork
Hardware Boxes 80 x 120 Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted For stacking and transportation of formwork and scaffold components.
Technical Data Capacity approx. 0.28 m³. Safety Instructions Load-carrying capacity 1.5 t. Follow Instructions for Use at all times! 835
500
1240
Plywood, SystemIndependent Accessories Service
64,300 64,300
536
100
Scaffolding, Stairs, Working Platforms
Climbing Systems
970
1240
600
33,400 40,200
850
103434 103429
Wall Formwork
Formwork Girders
Accessories for Logistics
Formwork Girders
Accessories for Logistics Lid for Wire Crate Pallet 80 x 120, painted For closing crate pallets 80 x 120 or mesh pallets 80 x 120. 37
Column Formwork
745
798
1100
Wall Formwork
Item no. Weight kg 065067 9,310
20,100
Pallet RP 110 x 125, painted For stacking and transportation of formwork and scaffold components.
Safety Instructions Load-carrying capacity 750 kg. Follow Instructions for Use at all times! 973
563
408
1143
Slab Formwork
106939
1160
Shoring Systems
1330
Climbing Systems
Complete with 4 pc. 111392 Extension GF 10 Safety Instructions Load-bearing capacity 500 kg. Follow Instructions for Use! 1010
750
Scaffolding, Stairs, Working Platforms
693
230
Bridge- and Tunnel Formwork
880
Plywood, SystemIndependent Accessories
1140
537
Service
953
878
Palett RP 80 x 110, galv. For stacking GF 100 guardrails.
493
28,100
385
111396
Pallet SD 150 x 75, galv. For stacking and transportation of 14 SKYDECK Panels 150 x 75.
Safety Instructions Load-bearing capacity 1.0 t. Follow Instructions for Use!
1720
Column Formwork Slab Formwork
82,400
Pallet SD 150 x 225, galv. For stacking and transportation of 48 SKYDECK panels 150 x 75.
1510
640
1630
760
Complete with 5 pc. 100707 Lashing 25 x 5750 mm Safety Instructions Load-bearing capacity 750 kg. Follow Instructions for Use!
1550
Scaffolding, Stairs, Working Platforms
250
Climbing Systems
2110
Shoring Systems
061530
1970
Item no. Weight kg 061500 76,700
Wall Formwork
Formwork Girders
Accessories for Logistics
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
2310
538
Formwork Girders
Accessories for Logistics
Column Formwork
970
300
Wall Formwork
Safety Instructions Load-bearing capacity 1.5 t. Follow Instructions for Use!
400
Pallet ST 100/2, galv. For stacking and transportation of ST 100 Stacking Tower components. Capacity: 84 stacking frames + base and head spindles + diagonals.
700
Item no. Weight kg 065050 124,000
2280 2400
Slab Formwork
900
Palett GF 85 x 210, galv. For stacking and transportation of GRIDFLEX Filler Panel GFL 183 x 20 and Main Beam BD 210 or Crossbeam BD 210.
Safety Instructions Load-bearing capacity 750 kg. Follow Instructions for Use!
1095
Climbing Systems
63,900
925
111738
Shoring Systems
1020
1020
Plywood, SystemIndependent Accessories
Safety Instructions Load-carrying capacity 750 kg. Follow Instructions for Use at all times!
1210
910
1360
1030
539
Service
Pallet HS 120 x 90, galv. For stacking and transportation of HANDSET elements.
820
64,700
1070
065080
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
2190
Safety Instructions Follow Instructions for Use! Load-bearing capacity 750 kg.
820
Pallet HS 150 x 90, galv. For stacking and transportation of HANDSET elements.
Column Formwork
1240
1070
Item no. Weight kg 065081 66,300
Wall Formwork
Formwork Girders
Accessories for Logistics
1510
910
1580
1030
7,490
Stacking Device MAXIMO, galv. For stacking and transportation of 2-5 MAXIMO or TRIO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
Safety Instructions Follow Instructions for Use at all times! Bearing capacity 500 kg per post, 2 t per stack.
066094
7,980
Stacking Device DOMINO, galv. For stacking and transportation of 2-8 DOMINO panels of all sizes. Suitable for crane and fork-lift transport. 4 pieces per stack.
Safety Instructions Load-bearing capacity 250 kg per ring, 1 to per stack. Follow Instructions for Use!
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
540
150 125
100
1115
Scaffolding, Stairs, Working Platforms
Climbing Systems
105
Shoring Systems
810
Slab Formwork
115058
Complete with 2 pc. 111392 Extension GF 10 Safety Instructions Load capacity 175 kg per ring, 350 kg per stack Follow Instructions for Use!
Wall Formwork
Stacking Device GRIDFLEX, galv. For stacking 10 Standard Element GFP 200 x 100, Filler Element Cross GFC 200 x 100 or Filler Element Longitudinal GFL 150 x 100 respectively. Suitable for crane and fork-lift transport. 2 pieces per stack.
111392
2,970
Extension GF 10
Shoring Systems
Accessories Tension Strap Rail GF 92 Tension Strap Rail GF 125
Ø48,3
Tension Strap Rail GF 92 As transport protection for GRIDFLEX Elements GFP 200 x 100 and GFL 150 x 100. Yellow powder-coated.
Climbing Systems
2,090
33
115427
Plywood, SystemIndependent Accessories
1258
Bridge- and Tunnel Formwork
Tension Strap Rail GF 125 As transport protection for GRIDFLEX Elements GFC 200 x 100. Red powder-coated.
43
4,230
161
115385
Scaffolding, Stairs, Working Platforms
130
933
541
Service
2,090 4,230
835
115427 115385
190
Slab Formwork
1085
Column Formwork
468
959
491
Item no. Weight kg 110939 21,700
Formwork Girders
Accessories for Logistics
Item no. Weight kg 100660 100678
60,400 65,600
Frame Pallets USP, galv. Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. For stacking and transportation of PERI UP scaffold components.
Wall Formwork
Formwork Girders
Accessories for Logistics Complete with 1 pc. 100707 Lashing 25 x 5750 mm 6 pc. 100706 Tube l = 1.0 m Note 36 T-Frame UVT with Spigot Tube UV 165 or Base Frame UVF with L-Frame UVL. Safety Instructions Load-carrying capacity 1.2 t. Follow Instructions for Use at all times!
061510
110,000
Pallet Lifting Trolley 1500 mm For moving pallets and crate pallets.
Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
542
832
Technical Data Forklift arm length 1500 mm, forklift arm width 520 mm, stroke range 85 - 195 mm. Safety Instructions Load-carrying capacity 2.0 t. Follow Instructions for Use at all times!
.
Plywood, SystemIndependent Accessories Service
775
590 1085 / 1405
Shoring Systems
Slab Formwork
Column Formwork
1020 / 1340
Service
543
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
544
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Machines and Tools
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
553 553 547 546 546 549 552 552 546 547 551 552 555 554 554 554 554 554 546 553 546 554 553 551 546 547 547 546 548 549 553 554 549 549 549 548 548 548 549 554 547 552 552 547 549 550 550 550 550 550 554 552 552 552 551 551 550 551 549 549 549 548
Plywood, SystemIndependent Accessories
Allan Key SW 14, long Assembly Bar 24, galv. Bit Holder for DSSE 642 Bit Holder for SCU 7-9 Bit Point TX 30 Centrepivot VHM Ø 60 mm Concrete Cone Gauge Cone Spanner TRH Depth Chuck for SCU 7-9 Depth Chuck for DSSE 642 DK Cone Remover UNI DK Tongs for Concrete Cone 58 Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit Ø 20 mm Drill Bit Ø 25 mm Drill Bit Ø 35 mm Drill Bit Ø 40 mm Drill Bit Ø 50 mm Electric Power Wrench M 14, ASB 636 Erection Bar GT/VT, galv. Extension 1/2" l = 250 mm Form Lining Drill Bit Ø 20 x 1000 mm Insert Socket SW 19 Magnet Cone Spanner MX Magnet Holder for SCU 7-9 Magnet Holder for DSSE 642 Power-Screwdriver DSSE 642 Power-Screwdriver SCU 7-9 Pre-Cutter HM Ø 40 mm Pre-Cutter VHM Ø 60 mm Ratchet Lever SW 19 Ratchet Spanner SW 24 "Combi" Ratchet Wrench 1" Ratchet Wrench 1/2" Ratchet Wrench 3/4" Reverse Plate HM Ø 40 mm Reverse Plate Twist Drill HM Ø 40 mm Reverse Plate Twist Drill VHM Ø 60 mm Reverse Plate VHM 28,5 Ø 60 mm Rivet Gun BZ 48, l = 500 mm Router DW 625-E SK Tongs for Concrete Cone 100 SK Tongs for Concrete Cone 67 Socket SW 13-1/2" l = 80 mm Socket SW 19-1/2" Socket SW 27-1/2" Socket SW 30-3/4" Socket SW 36-3/4" Socket SW 46-1" Socket SW 55-1" Socket Wrench SW 36, cromatized Spanner SW 46, for SB Spanner SW 70, for SB Spanner SW 80, for SB Tie Rod Spanner DW 15 Tie Rod Spanner MX Tie Rod Wrench 15, galv. Tie Rod Wrench 20, galv. Torx for Centrepivot Ø 60 mm Torx for Pre-Cutter Ø 60 mm Torx for Reverse Plate Ø 60 mm Torx for Reverse Plate/Pre-Cutter Ø 40 mm
545
Service
027212 027930 024921 072220 072140 105328 101995 110634 072240 024923 031655 031644 727112 031040 031080 031030 031100 031120 072150 070740 072160 031090 027200 114797 072230 024922 024920 072210 105317 105331 027180 021790 029610 072180 051764 105318 105311 105326 105330 044890 106081 031657 031656 072170 029620 029650 057276 102785 029630 029640 031480 027211 027213 027210 108129 114290 031070 031050 105346 105347 105327 105367
Item no. Weight kg 072210 1,600
Power-Screwdriver SCU 7-9 Universal power screwdriver with adjustable coupler, continuous electronic speed control and clockwise/anti-clockwise rotation.
Wall Formwork
Formwork Girders
Machines and Tools
Column Formwork
.
072220 072230 072240 072140
0,400 0,425 0,110 0,005
Accessories Bit Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Depth Chuck for SCU 7-9 Bit Point TX 30
072220 072230 072240 072140
0,400 0,425 0,110 0,005
Accessories Bit Holder for SCU 7-9 Bit Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Depth Chuck for SCU 7-9 Bit Point TX 30
072150
2,860
Climbing Systems
Shoring Systems
Slab Formwork
Technical Data Voltage 230 V 50-60 Hz. Power consumption 400 W. Max. tightening moment 28 Nm.
Electric Power Wrench M 14, ASB 636 Lightweight electric power wrench for momentfree working, with clockwise/anti-clockwise rotation. With 1/2” square drive.
Technical Data Voltage 230 V 50-60 Hz. Power consumption 230 W. Max. tightening moment 100 Nm.
072160
Service
0,340
Extension 1/2" l = 250 mm
.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
.
546
Formwork Girders
Machines and Tools Item no. Weight kg 072170 0,100
Socket SW 13-1/2" l = 80 mm
Wall Formwork
SW 13
2,700
Power-Screwdriver DSSE 642 Powerful two-speed universal power screwdriver with adjustable connector, continuous electronic speed control and clockwise/anti-clockwise rotation.
Technical Data Voltage 230 V 50-60 Hz. Power consumption 600 W. Rotation speed 0-600 and 0-1800/min. Max. tightening moment 30 Nm.
Column Formwork
024920
Accessories Bit Holder DSSE 642 Bit Holder for DSSE 642 Magnetic Holder for DSSE 642 Depth Chuck for DSSE 642
106081
5,100
Router DW 625-E Powerful router with electronic controll. Spindle locking device for simple change of the cutting bit. Compactly and handy design.
Climbing Systems
0,017 0,090 0,175
Scaffolding, Stairs, Working Platforms
024921 024922 024923
Technical Data Voltage 230 V 50-60 Hz. Power consumption 200 W. Rotation speed 8000 - 20000/min-1.
Bridge- and Tunnel Formwork
Accessories Bit Holder for DSSE 642 Magnetic Holder for DSSE 642 Depth Chuck for DSSE 642
.
Plywood, SystemIndependent Accessories
0,017 0,090 0,175
547
Service
024921 024922 024923
Shoring Systems
Slab Formwork
.
Formwork Girders
Machines and Tools Item no. Weight kg 105311 0,145
Reverse Plate Twist Drill HM Ø 40 mm For drilling the veneers to be repaired Ø 40 mm. Ø40
Column Formwork
Ø12
Wall Formwork
76
105317 105318 105367
0,008 0,018 0,002
Accessories Pre-Cutter HM (drill Ø 40 mm) Reverse Plate HM Ø 40 mm Torx for Reverse Plate/Pre-Cutter Ø 40 mm
105317 105318 105367
0,008 0,018 0,002
Access. Reverse Plate Twist Drill HM Ø 40 mm Pre-Cutter HM Ø 40 mm Reverse Plate HM Ø 40 mm Torx for Reverse Plate/Pre-Cutter Ø 40 mm
105326
0,260
105317
105367
Reverse Plate Twist Drill VHM Ø 60 mm For drilling the veneers to be repaired Ø 60 mm.
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
105318
Ø60
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Ø12
63
105330
105331 105330 105328 105347 105327 105346
548
0,003 0,012 0,003 0,002 0,002 0,002
Accessories Pre-Cutter VHM (drill Ø 60 mm) Reverse Plate VHM 28,5 Ø 60 mm Centrepivot VHM Ø 60 mm Torx for Pre-Cutter Ø 60 mm Torx for Reverse Plate Ø 60 mm Torx for Centrepivot Ø 60 mm
105328
105331
105327
105346 105347
Formwork Girders
Machines and Tools 0,003 0,012 0,003 0,002 0,002 0,002
Access. Reverse Plate Twist Drill VHM Ø 60 mm Pre-Cutter VHM Ø 60 mm Reverse Plate VHM 28,5 Ø 60 mm Centrepivot VHM Ø 60 mm Torx for Pre-Cutter Ø 60 mm Torx for Reverse Plate Ø 60 mm Torx for Centrepivot Ø 60 mm
072180
0,560
Ratchet Wrench 1/2"
Column Formwork
105331 105330 105328 105347 105327 105346
Wall Formwork
Item no. Weight kg
2,650
Ratchet Wrench 3/4"
5,300
Ratchet Wrench 1"
Scaffolding, Stairs, Working Platforms
029610
Climbing Systems
630
0,075
Socket SW 19-1/2"
SW 19
Plywood, SystemIndependent Accessories
029620
Bridge- and Tunnel Formwork
900
549
Service
051764
Shoring Systems
Slab Formwork
300
Formwork Girders
Machines and Tools Item no. Weight kg 029650 0,160
Socket SW 27-1/2"
Slab Formwork
Column Formwork
Wall Formwork
SW 27
057276
0,625
Socket SW 30-3/4"
SW 30
102785
0,452
Socket SW 36-3/4"
Shoring Systems
SW 36
0,580
Socket SW 46-1"
Scaffolding, Stairs, Working Platforms
Climbing Systems
029630
SW 46
029640
1,000
Socket SW 55-1"
031070
1,260
Tie Rod Wrench 15, galv. For easy handling of Tie Rod DW 15.
140
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
SW 55
Service
250
550
15
Formwork Girders
Machines and Tools Tie Rod Wrench 20, galv. For easy handling of Tie Rod DW 20.
260
3,480
20
Tie Rod Spanner DW 15 For Wingnut Counterplate DW 15, Wingnut Pivot Plate DW 15 and Wingnut DW 15.
Column Formwork
108129
Wall Formwork
140
Item no. Weight kg 031050 1,780
74
25
0,940
DK Cone Remover UNI For removing DK Sealing Cones.
Climbing Systems
117
031655
Shoring Systems
130
Slab Formwork
1096
30
327
Tie Rod Spanner MX For easy release of the Tie MX.
Scaffolding, Stairs, Working Platforms
2,100
Magnet Cone Spanner MX For removing Sealing Cone MX 55.
560
Plywood, SystemIndependent Accessories
0,893
95
114797
Bridge- and Tunnel Formwork
600
25
551
Service
114290
Item no. Weight kg 031644 031656 031657
0,580 0,600 0,660
DK, SK Tongs for Concrete Cone DK Tongs for Concrete Cone 58 SK Tongs for Concrete Cone 67 SK Tongs for Concrete Cone 100 For DK and SK Concrete Cones DW 15, SK Concrete Cones DW 20 and KK Concrete Cones M24 or SK Concrete Cones DW 26.
Column Formwork
Wall Formwork
Formwork Girders
Machines and Tools
101995
1,020
Concrete Cone Gauge Installation of concrete cones flush with the surface.
114
Shoring Systems
Slab Formwork
296
200
0,383
100
027210 027213 027211
15
3,300 2,300 0,760
Spanner SW for SB Spanner SW 80, for SB Spanner SW 70, for SB Spanner SW 46, for SB For different applications.
L 645 570 380
L
Plywood, SystemIndependent Accessories Service
Cone Spanner TRH For removing Sealing Cone TRH 55.
112
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
110634
552
Formwork Girders
Machines and Tools Item no. Weight kg 027180 1,760
Ratchet Lever SW 19 For moving Carriage CB 240 and SKSF 240.
Note Spanner size SW 19.
027200
0,100
Insert Socket SW 19
027930
6,120
Assembly Bar 24, galv. For shuttering of MULTIFLEX with GT 24 girders.
Slab Formwork
Accessories Insert Socket SW 19
Ø34
49
Shoring Systems
0,100
95
027200
Column Formwork
Wall Formwork
795
Erection Bar GT/VT, galv. For shuttering of MULTIFLEX with GT 24 or VT 20 girders.
Scaffolding, Stairs, Working Platforms
2,980
85
150
070740
Climbing Systems
20
1572
190
0,445
Allan Key SW 14, long For unscrewing the Anchor Positioning Stud M24, M30 and M36. SW 14
230
553
Service
027212
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
1711
Item no. Weight kg 021790 1,000
Ratchet Spanner SW 24 "Combi" For adjusting RUNDFLEX elements and Cantilevered Parapet Platform GKB.
Column Formwork
Note Wrench size SW 24. Length approx. 500 mm.
.
Wall Formwork
Formwork Girders
Machines and Tools
031480
2,460
Socket Wrench SW 36, cromatized For a diverse range of uses.
031040 031080 031030 031100 031120
0,040 0,055 0,090 0,125 0,160
Drill Drill Drill Drill Drill Drill
Bits Bit Ø Bit Ø Bit Ø Bit Ø Bit Ø
20 25 35 40 50
mm mm mm mm mm
.
031090
0,620
Form Lining Drill Bit Ø 20 x 1000 mm
.
044890
Service
2,120
Rivet Gun BZ 48, l = 500 mm For installing blind rivets Ø 5mm.
.
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
510
554
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
. Wall Formwork
Item no. Weight kg 727112 0,010
Formwork Girders
Drill Bit HSS DIN 338, Ø 5,1 mm For pre-drilling blind rivets Ø 5 mm.
555
Service
Machines and Tools
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Bolts, Nails, Pins 061230 710242 721817 710593 750330 710221 720610 710220 710219 710233 105402 710232 722169 780155 710299 714093 710222 721729 024910 104477 711078 781054 706462 024900 710226 029560 109612 113686 106797 026430 026220 029540 029550 710285 722859 104929 103518 710284 070100 018330 027340 035440 018320 018350 103740 780353 110598 110599 710266 102120 710224 710231 710225 710252 114727 706458 780357 026290 029420 029430 027990 027170 018050 027690 105400 037160 113012 556
Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt
EN 14399-4 M12 x 140-10.9 ISO 4014 M10 x 100-8.8, galv. ISO 4014 M10 x 50-8.8, galv. ISO 4014 M10 x 80-8.8, galv. ISO 4014 M12 x 100-8.8, galv. ISO 4014 M12 x 60-8.8, galv. ISO 4014 M12 x 70-8.8, galv. ISO 4014 M12 x 80-8.8, galv. ISO 4014 M16 x 100-8.8, galv. ISO 4014 M16 x 110-8.8, galv. ISO 4014 M16 x 120-8.8, galv. ISO 4014 M16 x 130-8.8, galv. ISO 4014 M16 x 140-8.8, galv. ISO 4014 M16 x 160-8.8, galv. ISO 4014 M16 x 60-8.8, galv. ISO 4014 M16 x 70-8.8, galv. ISO 4014 M16 x 80-8.8, galv. ISO 4014 M16 x 90-8.8, galv. ISO 4014 M20 x 100-8.8, galv. ISO 4014 M20 x 120-8.8, galv. ISO 4014 M20 x 130-8.8, galv. ISO 4014 M20 x 160-8.8, galv. ISO 4014 M20 x 200-8.8, galv. ISO 4014 M20 x 80-8.8, galv. ISO 4014 M20 x 90-8.8, galv. ISO 4014 M24 x 120-10.9, galv. ISO 4014 M24 x 130-8.8, galv. ISO 4014 M24 x 200-8.8, galv. ISO 4014 M24 x 220-10.9, galv. ISO 4014 M24 x 70-10.9, galv. ISO 4014 M24 x 80-10.9, galv. ISO 4014 M30 x 130-10.9, galv. ISO 4014 M36 x 130-10.9, galv. ISO 4014 M8 x 100-8.8, galv. ISO 4014 M8 x 140-8.8, galv. ISO 4014 M8 x 150-8.8, galv. ISO 4014 M8 x 190-8.8, galv. ISO 4014 M8 x 60-8.8, galv. ISO 4016 M12 x 120-4.6 MU, galv. ISO 4016 M12 x 140-4.6 MU, galv. ISO 4016 M12 x 180-4.6 MU, galv. ISO 4016 M12 x 40-4.6 MU, galv. ISO 4016 M16 x 140-4.6 MU, galv. ISO 4016 M16 x 160-4.6 MU, galv. ISO 4016 M16 x 280-4.6 MU, galv. ISO 4016 M8 x 25-4.6 MU, galv. ISO 4017 M12 x 140-8.8, galv. ISO 4017 M12 x 240-8.8, galv. ISO 4017 M12 x 25-8.8, galv. ISO 4017 M12 x 30-8.8, galv. ISO 4017 M12 x 40-8.8, galv. ISO 4017 M16 x 30-8.8, galv. ISO 4017 M16 x 45-8.8, galv. ISO 4017 M16 x 50-8.8, galv. ISO 4017 M20 x 100-8.8, galv. ISO 4017 M20 x 40-8,8, galv. ISO 4017 M20 x 50-8.8, galv. ISO 4017 M24 x 50-10.9, galv. ISO 4017 M30 x 70-8.8, galv. ISO 4017 M36 x 70-8.8, galv. Ø 14 x 107, galv. Ø 16 x 42, galv. Ø 16 x 65/86, galv. Ø 19 x 165, galv. Ø 20 x 140, galv. Ø 20 x 205, galv. Ø 20 x 260, galv.
560 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 558 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 560 559 559 565 565 566 566 566 568 568
104031 107579 026200 105435 715585 113247 113247 111567 112815 115145 018060 022230 710304 710618 018280 051650 710240 024360 725462 024380 024390 024410 710295 710326 710709 024140 723439 750076 029440 051640 024490 024500 024510 024520 024270 024260 711060 110281 024090 710234 710330 710238 710229 706488 022250 710336 710334 780356 710381 070890 781053 105032 722086 711071 022210 722083 780304 722318 780305 780302 730050 024530 024310 024350 710262 021770 722457
Bolt Ø 21 x 120 Bolt Ø 25 x 154, galv. Bolt Ø 25 x 160, KG, galv. Bolt Ø 50 x 330, galv. Bolt Ø 25 x 240, SKS, galv. Bolt Ø 25 x 260, mont. Bolt Ø 25 x 260, mont. Bolt Ø 26 x 120 Clamping Plate M16 Nova Grip Clamping Plate M16 Nova Grip Cotter Pin 4/1, galv. Cotter Pin 5/1, galv. Cotter Pin 7, galv. Cotter Pin 8, galv. Double Head Nail l = 65 mm F.H. Bolt DIN 603 M6 x 180 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN 603 M8 x 140 MU, galv. F.H. Bolt DIN 603 M8 x 160 MU, galv. F.H. Bolt DIN 603 M8 x 200 MU, galv. F.H. Bolt DIN 603 M8 x 250 MU, galv. F.H. Bolt DIN 603 M8 x 45 MU, galv. F.H. Bolt DIN 603 M8 x 60 MU, galv. F.H. Bolt DIN 603 M8 x 65 MU, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. F.H. Bolt DIN 603 M8 x 80 MU, galv. F.H. Bolt DIN 603 M8 x 90 MU, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 80, galv. Lag Screw DIN 571 8 x 100, galv. Lag Screw DIN 571 8 x 130, galv. Lag Screw DIN 571 8 x 140, galv. Lag Screw DIN 571 8 x 160, galv. Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 80, galv. Loop Bolt M20, left, galv. Loop Bolt M20, right, galv. Nut ISO 4032 M 8-8, galv. Nut ISO 4032 M10-8, galv. Nut ISO 4032 M12-8, galv. Nut ISO 4032 M16-10, galv. Nut ISO 4032 M16-8, galv. Nut ISO 4032 M24-10, galv. Nut ISO 4032 M24-8, galv. Nut ISO 4032 M30-10, galv. Nut ISO 4032-M20-8, galv. Nut ISO 7042 M10-8, galv. Nut ISO 7042 M12-8, galv. Nut ISO 7042 M16-8, galv. Nut ISO 7042 M20-8, galv. Nut ISO 7042 M24-8, galv. Nut ISO 7042 M6-8, galv. Nut ISO 7042 M8-8, galv. Pin for GRV, galv. Rivet DIN 7337 A 4,8 x 23, Alu Rivet DIN 7337 A 5 x 12, Alu Rivet DIN 7337 A 6 x 10, Steel Rivet DIN 7337 B 5 x 20, GAV Rivet DIN 7337 B 5 x 25, Alu Rivet DIN 7337 B 5 x 30, Alu Screwnail 40mm, galv. Screwnail 70 mm, galv. Screwnail 90 mm, galv. Selftapping Screw 5,5 x 45 TX 30, galv. Selftapping Screw 6,3 x 32, galv. Sleeve ISO 8752 10 x 70, galv.
567 566 567 567 568 569 568 567 562 562 569 569 569 569 564 565 565 565 565 565 565 565 565 565 565 565 565 565 562 562 562 562 562 562 562 562 560 560 560 560 560 560 560 560 560 560 560 561 561 561 561 561 561 561 569 564 564 564 564 564 564 564 564 564 563 564 569
Formwork Girders
Bolts, Nails, Pins
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
569 564 564 564 564 564 564 563 563 563 563 563 563 563 563 562 561 561 561 561 561 561 561 561 561 561 561 561 562 559 559 559
Plywood, SystemIndependent Accessories
Sleeve ISO 8752 5 x 35, galv. Spax Screw TX 30 6 x 100, yellow galv. Spax Screw TX 30 6 x 120, yellow galv. Spax Screw TX 30 6 x 140, yellow galv. Spax Screw TX 30 6 x 160, yellow galv. Spax Screw TX 30 6 x 180, yellow galv. Spax Screw TX 30 8 x 20, yellow galv. TSS-Torx 6 x 40, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 60, ZKS, galv. TSS-Torx 6 x 80, galv. TSS-Torx 8 x 38, galv. TSS-Torx 8 x 44, galv. TSS-Torx 8 x 58, galv. TSS-Torx 8 x 78, galv. Washer DIN 434 18, galv. Washer ISO 7089 200 HV, A 12, galv. Washer ISO 7089 200 HV, A 14, galv. Washer ISO 7089 200 HV, A 16, galv. Washer ISO 7089 200 HV, A 20, galv. Washer ISO 7089 200 HV, A 24, galv. Washer ISO 7089 200 HV, A 8, galv. Washer ISO 7093-1 200 HV, A 12, galv. Washer ISO 7093-1 200 HV, A 16, galv. Washer ISO 7094 100 HV A 12, galv. Washer ISO 7094 100 HV A 16, galv. Washer ISO 7094 100 HV A 20, galv. Washer ISO 7094 100 HV A 8, galv. Washer R11 DIN 440, galv. Zyl. Bolt ISO 4762 M12 x 60-8.8, galv. Zyl. Bolt ISO 4762 M12 x 90-8.8, galv. Zyl. Bolt ISO 4762 M30 x 70-8.8, galv.
557
Service
711063 024950 024960 024970 024980 024990 024550 024540 024470 110272 024690 103444 104892 104647 103443 710880 780702 725574 711074 706454 710874 780354 750350 710886 113348 113349 113350 113347 710139 104278 104528 113007
Formwork Girders Wall Formwork Column Formwork Slab Formwork
Item no. Weight kg 710284 710285 722859 104929 103518 710593 710242 721817 710221 720610 710220 750330 710299 714093 710222 721729 710219 710233 105402 710232 722169 780155 024900 710226 024910 104477 711078 781054 706462 109612 113686
0,031 0,050 0,066 0,050 0,060 0,062 0,063 0,040 0,067 0,075 0,087 0,100 0,123 0,139 0,160 0,170 0,184 0,200 0,200 0,210 0,246 0,278 0,255 0,340 0,303 0,300 0,360 0,447 0,545 0,600 0,839
Bolts ISO 4014-8.8, galv. Bolt ISO 4014 M8 x 60-8.8, galv. Bolt ISO 4014 M8 x 100-8.8, galv. Bolt ISO 4014 M8 x 140-8.8, galv. Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Bolt ISO 4014 M10 x 80-8.8, galv. Bolt ISO 4014 M10 x 100-8.8, galv. Bolt ISO 4014 M10 x 50-8.8, galv. Bolt ISO 4014 M12 x 60-8.8, galv. Bolt ISO 4014 M12 x 70-8.8, galv. Bolt ISO 4014 M12 x 80-8.8, galv. Bolt ISO 4014 M12 x 100-8.8, galv. Bolt ISO 4014 M16 x 60-8.8, galv. Bolt ISO 4014 M16 x 70-8.8, galv. Bolt ISO 4014 M16 x 80-8.8, galv. Bolt ISO 4014 M16 x 90-8.8, galv. Bolt ISO 4014 M16 x 100-8.8, galv. Bolt ISO 4014 M16 x 110-8.8, galv. Bolt ISO 4014 M16 x 120-8.8, galv. Bolt ISO 4014 M16 x 130-8.8, galv. Bolt ISO 4014 M16 x 140-8.8, galv. Bolt ISO 4014 M16 x 160-8.8, galv. Bolt ISO 4014 M20 x 80-8.8, galv. Bolt ISO 4014 M20 x 90-8.8, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M20 x 120-8.8, galv. Bolt ISO 4014 M20 x 130-8.8, galv. Bolt ISO 4014 M20 x 160-8.8, galv. Bolt ISO 4014 M20 x 200-8.8, galv. Bolt ISO 4014 M24 x 130-8.8, galv. Bolt ISO 4014 M24 x 200-8.8, galv.
Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork
026430 026220 029560 106797 029540 029550
0,334 0,360 0,535 0,870 0,920 1,400
Bolts ISO 4014, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 80-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 220-10.9, galv. Bolt ISO 4014 M30 x 130-10.9, galv. Bolt ISO 4014 M36 x 130-10.9, galv. High-strength bolts for anchoring climbing systems.
L 70 80 120 220 130 130 Note Wrench size SW 36.
L
Plywood, SystemIndependent Accessories Service
L 60 100 140 150 190 80 100 50 60 70 80 100 60 70 80 90 100 110 120 130 140 160 80 90 100 120 130 160 200 130 200
L
Climbing Systems
Shoring Systems
Bolts, Nails, Pins
558
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 0,022 0,060 0,132 0,140 0,180 0,276 0,310 0,480
Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt Bolt
ISO ISO ISO ISO ISO ISO ISO ISO ISO
4016-4.6, MU, galv. 4016 M8 x 25-4.6 MU, galv. 4016 M12 x 40-4.6 MU, galv. 4016 M12 x 120-4.6 MU, galv. 4016 M12 x 140-4.6 MU, galv. 4016 M12 x 180-4.6 MU, galv. 4016 M16 x 140-4.6 MU, galv. 4016 M16 x 160-4.6 MU, galv. 4016 M16 x 280-4.6 MU, galv.
L 25 40 120 140 180 140 160 280
Wall Formwork
780353 035440 070100 018330 027340 018320 018350 103740
Slab Formwork
Bolt ISO 4017-8.8, galv. Bolt ISO 4017 M12 x 25-8.8, galv. Bolt ISO 4017 M12 x 30-8.8, galv. Bolt ISO 4017 M12 x 40-8.8, galv. Bolt ISO 4017 M12 x 140-8.8, galv. Bolt ISO 4017 M12 x 240-8.8, galv. Bolt ISO 4017 M16 x 30-8.8, galv. Bolt ISO 4017 M16 x 45-8.8, galv. Bolt ISO 4017 M16 x 50-8.8, galv. Bolt ISO 4017 M20 x 40-8,8, galv. Bolt ISO 4017 M20 x 50-8.8, galv. Bolt ISO 4017 M20 x 100-8.8, galv. Bolt ISO 4017 M30 x 70-8.8, galv. Bolt ISO 4017 M36 x 70-8.8, galv. With a continuous thread.
L 25 30 40 140 240 30 45 50 40 50 100 70 70
Shoring Systems
0,037 0,030 0,047 0,142 0,242 0,077 0,097 0,100 0,157 0,178 0,321 0,590 0,930
Climbing Systems
710266 102120 710224 110598 110599 710231 710225 710252 706458 780357 114727 029420 029430
Column Formwork
L
Zyl. Bolt Zyl. Bolt Zyl. Bolt Zyl. Bolt
ISO ISO ISO ISO
4762-8.8, galv. 4762 M12 x 60-8.8, galv. 4762 M12 x 90-8.8, galv. 4762 M30 x 70-8.8, galv.
L 60 90 70 Note Spanner size SW 10.
Plywood, SystemIndependent Accessories
0,067 0,089 0,700
L
559
Service
104278 104528 113007
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
L
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 026290 0,280
Bolt ISO 4017 M24 x 50-10.9, galv. High-strength bolts for scaffold anchoring.
Note Wrench size SW 36.
Column Formwork
Wall Formwork
50
SW 36 M 24
061230
0,142
Bolt EN 14399-4 M12 x 140-10.9
Note Wrench size SW 22. 140 SW 22
711060 110281
0,418 0,418
Loop Bolt M20, galv. Loop Bolt M20, left, galv. Loop Bolt M20, right, galv.
Shoring Systems
Slab Formwork
M 12
160
024090 710234 710330 710229 710334 022250
0,005 0,010 0,017 0,033 0,064 0,100
Nut Nut Nut Nut Nut Nut Nut
ISO ISO ISO ISO ISO ISO ISO
4032, galv. 4032 M 8-8, galv. 4032 M10-8, galv. 4032 M12-8, galv. 4032 M16-8, galv. 4032-M20-8, galv. 4032 M24-8, galv.
710238 706488 710336
0,033 0,110 0,220
Nut Nut Nut Nut
ISO ISO ISO ISO
4032, galv. 4032 M16-10, galv. 4032 M24-10, galv. 4032 M30-10, galv.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
M 20
560
Ø25
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg ISO ISO ISO ISO ISO ISO ISO ISO
7042, galv. 7042 M6-8, galv. 7042 M8-8, galv. 7042 M10-8, galv. 7042 M12-8, galv. 7042 M16-8, galv. 7042 M20-8, galv. 7042 M24-8, galv.
750350 710886
0,027 0,041
780354 780702 725574 711074 706454 710874
0,002 0,006 0,009 0,011 0,017 0,032
Washer Washer Washer Washer Washer Washer Washer
113347 113348 113349 113350
0,013 0,043 0,087 0,174
Washers ISO 7094 100 HV, galv. Washer ISO 7094 100 HV A 8, galv. Washer ISO 7094 100 HV A 12, galv. Washer ISO 7094 100 HV A 16, galv. Washer ISO 7094 100 HV A 20, galv.
Column Formwork
0,001 0,006 0,011 0,017 0,030 0,065 0,070
Wall Formwork
Nut Nut Nut Nut Nut Nut Nut Nut
722086 711071 780356 710381 070890 781053 105032
Shoring Systems Scaffolding, Stairs, Working Platforms
Climbing Systems
HV, galv. HV, A 8, galv. HV, A 12, galv. HV, A 14, galv. HV, A 16, galv. HV, A 20, galv. HV, A 24, galv.
Bridge- and Tunnel Formwork
200 200 200 200 200 200 200
Plywood, SystemIndependent Accessories
7089 7089 7089 7089 7089 7089 7089
561
Service
ISO ISO ISO ISO ISO ISO ISO
Slab Formwork
Washer ISO 7093-1 200 HV, galv. Washer ISO 7093-1 200 HV, A 12, galv. Washer ISO 7093-1 200 HV, A 16, galv. Corresponds to old standard DIN 9021. With large supporting area.
Item no. Weight kg 710880 0,032
Washer DIN 434 18, galv.
0,019
Washer R11 DIN 440, galv.
Ø 11
112815 115145
0,290 0,000
Climbing Systems
3
Clamping Plates Nova Grip Clamping Plate M16 Nova Grip Clamping Plate M16 Nova Grip
Ø20 / Ø21 50 / 63
029440 051640 024270 024260 024490 024500 024510 024520
0,005 0,014 0,023 0,027 0,032 0,044 0,047 0,052
Lag Lag Lag Lag Lag Lag Lag Lag Lag
Screws DIN 571, galv. Screw DIN 571 6 x 20, galv. Screw DIN 571 6 x 80, galv. Screw DIN 571 8 x 60, galv. Screw DIN 571 8 x 80, galv. Screw DIN 571 8 x 100, galv. Screw DIN 571 8 x 130, galv. Screw DIN 571 8 x 140, galv. Screw DIN 571 8 x 160, galv.
30 / 38
L 20 80 60 80 100 130 140 160
L
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
5
Ø34
710139
Plywood, SystemIndependent Accessories Service
30
26
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
18
57 / 71
Formwork Girders
Bolts, Nails, Pins
562
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 0,005 0,008 0,010
TSS-Torx, galv. TSS-Torx 6 x 40, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 80, galv. For Torx Bits TX 30. Self-drilling.
L 40 60 80
Wall Formwork
024540 024470 024690
L
Column Formwork
TX 30
0,009 0,011 0,015 0,020
TSS-Torx, galv. TSS-Torx 8 x 38, galv. TSS-Torx 8 x 44, galv. TSS-Torx 8 x 58, galv. TSS-Torx 8 x 78, galv. For Torx Bits TX 30. Self-drilling.
L 38 44 58 78
Slab Formwork
103444 104892 104647 103443
L
Shoring Systems
TX 30
TSS-Torx 6 x 60, ZKS, galv. For Torx Blade TX 30. Self-drilling.
Climbing Systems
0,006
60
Selftapping Screw 5,5 x 45 TX 30, galv.
45 TX 30
Bridge- and Tunnel Formwork
0,007
Plywood, SystemIndependent Accessories
710262
Scaffolding, Stairs, Working Platforms
TX 30
563
Service
110272
Formwork Girders Wall Formwork
Bolts, Nails, Pins Item no. Weight kg 024550 024950 024960 024970 024980 024990
0,005 0,012 0,015 0,017 0,019 0,021
Spax Screws TX 30, yellow galv. Spax Screw TX 30 8 x 20, yellow galv. Spax Screw TX 30 6 x 100, yellow galv. Spax Screw TX 30 6 x 120, yellow galv. Spax Screw TX 30 6 x 140, yellow galv. Spax Screw TX 30 6 x 160, yellow galv. Spax Screw TX 30 6 x 180, yellow galv. For Torx Blade TX 30. Self-drilling.
L 20 100 120 140 160 180
L
Shoring Systems
Slab Formwork
Column Formwork
TX 30
024530 024310 024350
0,001 0,005 0,010
Screwnails, galv. Screwnail 40mm, galv. Screwnail 70 mm, galv. Screwnail 90 mm, galv.
.
018280
1,000
Double Head Nail l = 65 mm
Note Delivery unit: carton with 1000 pieces. 75 65
021770
0,007
Selftapping Screw 6,3 x 32, galv.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø3,1
32
722083 780304 722318 780305 780302 730050
0,001 0,001 0,003 0,005 0,006 0,004
Rivets DIN 7337 Rivet DIN 7337 A 4,8 x 23, Alu Rivet DIN 7337 A 5 x 12, Alu Rivet DIN 7337 A 6 x 10, Steel Rivet DIN 7337 B 5 x 20, GAV Rivet DIN 7337 B 5 x 25, Alu Rivet DIN 7337 B 5 x 30, Alu
L 23 12 10 20 25 30
L
564
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 603, galv. 603 M6 x 180 MU, galv. 603 M8 x 45 MU, galv. 603 M8 x 60 MU, galv. 603 M8 x 65 MU, galv. 603 M8 x 70 MU, galv. 603 M8 x 80 MU, galv. 603 M8 x 90 MU, galv. 603 M8 x 100 MU, galv. 603 M8 x 125 MU, galv. 603 M8 x 140 MU, galv. 603 M8 x 160 MU, galv. 603 M8 x 200 MU, galv. 603 M8 x 250 MU, galv.
L B 180 24 45 22 22 60 65 22 22 80 80 22 90 22 100 80 125 113 140 28 160 148 200 150 250 150 Note Wrench size SW 10.
Ø17 / Ø 21
L B
Wall Formwork
F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN F.H. Bolt DIN With nut.
Column Formwork
0,060 0,028 0,030 0,036 0,033 0,036 0,040 0,050 0,058 0,070 0,074 0,090 0,109
Slab Formwork
051650 710295 710326 710709 024140 723439 750076 710240 024360 725462 024380 024390 024410
027990
0,150
Shoring Systems
M6/M8 SW 10 / SW 13
Bolt Ø 14 x 107, galv. For different connections. 129 107
Climbing Systems
Ø26
Ø5,5
Ø14
0,030
027170
0,102
Accessories Cotter Pin 4/1, galv.
Scaffolding, Stairs, Working Platforms
018060
Bolt Ø 16 x 42, galv. For different connections. 60
Bridge- and Tunnel Formwork
43
24
Ø5
0,030
Accessories Cotter Pin 4/1, galv.
565
Service
018060
Plywood, SystemIndependent Accessories
16
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 018050 0,171
Bolt Ø 16 x 65/86, galv. For different connections. 110 64
Ø25
Ø5
Ø16
018060
0,030
027690
0,368
Accessories Cotter Pin 4/1, galv. Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall thickness. 165
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
85
125
Ø19
105400
0,330
Bolt Ø 20 x 140, galv. For different connections. 140 89
Scaffolding, Stairs, Working Platforms
Climbing Systems
Ø8
Ø20
018060
0,030
107579
0,707
Accessories Cotter Pin 4/1, galv. Bolt Ø 25 x 154, galv. For different connections. 154
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
87 10 Ø6
022230
566
0,033
Accessories Cotter Pin 5/1, galv.
Ø25
Formwork Girders
Bolts, Nails, Pins Item no. Weight kg 026200 0,590
Bolt Ø 25 x 160, KG, galv. For different connections for KG. 156
Wall Formwork
132
022230
0,033
105435
4,960
Column Formwork
25
Accessories Cotter Pin 5/1, galv. Bolt Ø 50 x 330, galv. For different connections.
Slab Formwork
330 295
Ø 50
10
104031
0,462
Shoring Systems
0,033
Accessories Cotter Pin 5/1, galv. Bolt Ø 21 x 120 For different connections.
Climbing Systems
022230
Ø10
207 122 Ø6
0,030
111567
0,729
Accessories Cotter Pin 4/1, galv. Bridge- and Tunnel Formwork
018060
Scaffolding, Stairs, Working Platforms
Ø21
Bolt Ø 26 x 120 For different connections. 207 122
Plywood, SystemIndependent Accessories
Ø6
Ø26
0,033
Accessories Cotter Pin 5/1, galv.
567
Service
022230
Bolt Ø 20 x 205, galv. For corner bracing of the RAPID column frames.
125 Ø20
018060
0,030
113012
0,000
Accessories Cotter Pin 4/1, galv. Bolt Ø 20 x 260, galv. For different connections.
90
260 Ø20
0,030
715585
1,050
Accessories Cotter Pin 4/1, galv. Bolt Ø 25 x 240, SKS, galv. For different connections.
Ø25
240
92
018060
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Complete with 1 pc. 018060 Cotter Pin 4/1, galv.
205
Item no. Weight kg 037160 0,736
Wall Formwork
Formwork Girders
Bolts, Nails, Pins
Scaffolding, Stairs, Working Platforms
Ø20
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
022230
568
0,033
Accessories Cotter Pin 5/1, galv.
Formwork Girders
Bolts, Nails, Pins
Ø25
260
Wall Formwork
Bolt Ø 25 x 260, mont. For different connections.
92
0,033
022210
1,900
Accessories Cotter Pin 5/1, galv. Pin for GRB, galv. For connecting the Articulated Waler GRB and Articulated Adjustable Waler GSRV 65-90.
Slab Formwork
022230
Column Formwork
Ø20
200 145 Ø40
0,033
022230 018060
0,033 0,030
Accessories Cotter Pin 5/1, galv. Cotter Pin 5, 4, galv. Cotter Pin 5/1, galv. Cotter Pin 4/1, galv. For pins Ø 25 mm to Ø 40 mm.
Climbing Systems
022230
Shoring Systems
Ø6
0,098 0,074
Cotter Pin 8, 7, galv. Cotter Pin 8, galv. Cotter Pin 7, galv.
Bridge- and Tunnel Formwork
710618 710304
Scaffolding, Stairs, Working Platforms
Ø5
711063 722457
0,003 0,015
Plywood, SystemIndependent Accessories
Ø7/Ø8
Sleeve ISO 8752, galv. Sleeve ISO 8752 5 x 35, galv. Sleeve ISO 8752 10 x 70, galv.
35 / 70
Ø 5 / Ø 10
569
Service
Item no. Weight kg 113247 1,130
Service
570
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
575 576 574 576 574 573 575 576 577 574 574 574 575 572 572 573 572 572 572 573 573 573 576 576 576 576 576 576 576 576 577 576 576 576 576 575 573 577 577 577 577 576
Plywood, SystemIndependent Accessories
Anchor Chain 3,0 kN l = 2.5 m Angle Bracket 90° Beam Connector, galv. Bulldog-Spike Ø 48/12 mm Chamfer Strip 15/15 l = 2.70 m Chamfer Strip with Flange l = 2.50 m Clamp Lock Cutting Cost Scaffold Tube Double Coupler NK 60/48, galv. Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/40 l = 3.00 m Framing Clip, galv. Hook Strap HB for VT, galv. PERI Hotknife Peridrain Clip Peridrain Edge Strip Peridrain Edge Strip Clip Peridrain Fabric b = 1.50, l = 25.0 m Peridrain Fabric b = 2.80, l = 25.0 m Plug Ø 20 mm Plug Ø 20/24 mm Plug Ø 26 mm for Bolt Anchor Sleeve M24 Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaffold Tube Alu Ø 48,3 x 4,0, per m Screw-On Coupler AK 48, galv. Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, Ü-Marking Spanner for Clamp Lock, galv. Spax Screw SK 3,5 x 45, galv. Standard Coupler NK 48/48, galv. Swivel Coupling DK 38/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 60/48, galv. Turnbuckle 3.0 kN, M 12
571
Service
065073 123478 018310 070030 054240 031200 030790 026417 017030 030260 101706 018290 024880 031675 102098 102110 102099 031674 031673 030290 030300 026250 026411 026412 026413 026414 026419 026418 026415 026416 017040 070711 070712 070710 070713 030820 102109 017020 102400 017010 017000 065074
Item no. Weight kg 031673 031674
25,900 13,875
Peridrain Fabric Peridrain Fabric b = 2.80, l = 25.0 m Peridrain Fabric b = 1.50, l = 25.0 m Drainage fabric for improving the water-cement ratio and achieving a high-grade concrete surface with no shrinking cavities.
B
031675
1,000
PERI Hotknife For cutting and sealing Peridrain fabric edges.
Technical Data Voltage 230 V 50-60 Hz.
.
Shoring Systems
0,129
Peridrain Edge Strip Clip For assembling the Peridrain fabric edge strip on the lateral edge profiles with RUNDFLEX, MAXIMO and TRIO elements.
72
102098
Service
0,073
Peridrain Clip For attaching Peridrain fabric to the top and bottom edge profiles on MAXIMO and TRIO elements.
40
78
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
78
Climbing Systems
102099
80
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Accessories
63
572
Formwork Girders
Accessories
Wall Formwork
Peridrain Edge Strip For assembly of Peridrain fabric on the lateral edge profiles with RUNDFLEX, MAXIMO and TRIO elements. Fin-Ply 12 mm, l= 3.00 m. 121
Item no. Weight kg 102110 3,200
3000
030290
0,002
Plug Ø 20 mm For closing Ø 20 mm tie holes which are not required.
Note Delivery unit 500 pieces.
Shoring Systems
Spax Screw SK 3,5 x 45, galv. Cross-recessed countersunk head screws. For mounting the edge strip to the edge strip retaining clip.
Ø25
0,005
Ø21
102109
Slab Formwork
Column Formwork
12
13
Note Delivery unit of 250 pieces.
Climbing Systems
Plug Ø 20/24 mm For sealing tie holes Ø 20 and Ø 24mm which are not required.
Ø 29
0,003
Scaffolding, Stairs, Working Platforms
17
030300
20
026250
0,005
Plug Ø 26 mm for Bolt Anchor Sleeve M24 For closing the cone for the Anchor Sleeve M24.
2500
15
573
Plywood, SystemIndependent Accessories
Chamfer Strip with Flange l = 2.50 m Plastic chamfer strip.
15
0,470
20
031200
Service
Ø 26
Bridge- and Tunnel Formwork
Ø 23
27
Item no. Weight kg 030260 101706
0,500 1,230
Formwork Joints Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/40 l = 3.00 m Plastic profile strip for easier striking of shafts.
Wall Formwork
Formwork Girders
Accessories
34/65
22
2500 / 3000
Column Formwork
max 20 max 40
Chamfer Strip 15/15 l = 2.70 m For TRIO column formwork and on external corners. Edge length 15 x 15 mm. 115 67
Shoring Systems
2700
0,098
Framing Clip, galv. For connecting crossed timbers or girders.
36
1,000
018310
1,810
Accessories Double Head Nail l = 65 mm Beam Connector, galv. For connecting crossed timbers or girders. With captive Quick Jack Nuts.
min 200
320
max 280
018280
Ø4,8
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
98
185
Climbing Systems
018290
Ø12
174
Service
214
574
50
144
1,900
Slab Formwork
054240
Formwork Girders
Accessories Item no. Weight kg 024880 0,481
Hook Strap HB for VT, galv. For fixing VT girders on Steel Walers SRZ and SRU, Profile U100 und U120. 38
Wall Formwork
70
152 (U 100)
030790
0,430
Column Formwork
162 (U 120) 172 (U 140)
Clamp Lock For anchorage with anchoring wire Ø 5 to 10 mm.
Shoring Systems
100
Slab Formwork
40
1,500
Spanner for Clamp Lock, galv. For anchorage with anchoring wire Ø 5 to 10 mm.
Climbing Systems
030820
min 195
Technical Data Permissible tension force 3.0 kN.
2500
Plywood, SystemIndependent Accessories
Anchor Chain 3,0 kN l = 2.5 m
575
Service
1,370
15
065073
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
max 70
Formwork Girders
Accessories Item no. Weight kg 065074 0,450
Turnbuckle 3.0 kN, M 12
Technical Data Permissible tension force 3.0 kN.
123478
0,255
max 300
Angle Bracket 90° For diverse timber connections. Ø11
90
Column Formwork
Wall Formwork
16
min 220
Ø5 90
Slab Formwork
65
070030
0,015
Bulldog-Spike Ø 48/12 mm
Ø3 50
070710 070711 070712 070713
0,000 0,000 0,000 0,000
026415 026416 026417 026411 026412 026413 026414 026419 026418
3,550 1,500 0,000 3,550 7,100 10,650 14,200 17,750 21,600
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Ø12,4
7
Softwood Timbers DIN 4074-1 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, Ü-Marking
Scaffold Tubes Steel Ø 48,3 x 3,2 Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaffold Tube Alu Ø 48,3 x 4,0, per m Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m
L
1000 2000 3000 4000 5000 6000
L Ø48,3x3,2
576
Formwork Girders
Accessories Standard Coupler NK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
Wall Formwork
(9)
Item no. Weight kg 017020 1,120
SW 19
Double Coupler NK 60/48, galv. For Scaffold Tubes Ø 48 mm and Ø 60 mm.
Note Wrench size SW 19.
Column Formwork
1,400
( 9)
017030
Swivel Coupling DK 38/48, galv. For Scaffold Tubes Ø 48 mm and Ø 38 mm.
Note Wrench size SW 19.
Shoring Systems
SW 19
Swivel Coupling DK 48/48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 19.
Climbing Systems
1,400
Scaffolding, Stairs, Working Platforms
(27)
017010
SW 19
1,540
Swivel Coupling DK 60/48, galv. For Scaffold Tubes Ø 48 mm and Ø 60 mm.
Note Wrench size SW 19.
Bridge- and Tunnel Formwork
(26)
017000
0,850
Screw-On Coupler AK 48, galv. For Scaffold Tubes Ø 48 mm.
Note Wrench size SW 30, SW 19. SW 30
( 12)
017040
Plywood, SystemIndependent Accessories
SW 19
SW 19
577
Service
1,100
(27)
102400
Slab Formwork
SW 19
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
TRIO Cleaning, Repair (Custom Formwork) 071204 700844 700845 700846 700843 727112 031040 031080 031030 727057 727056 727060 727061 727058 727059 103321 103323 745645 745319 745569 745570 745322 745323 745560 745560 745324 745324 745580 745321 745347 745346 103333 103274 103275 103311 740275 740324 745305 740279 740278 740277 740276 740276 740251 740323 745303 745300 740256 740287 740285 740284 740284 740286 740257 740257 740252 740252 740255 740255 745341 740322 745340 745345 745344 745343 745342 740770 578
Additional Cleaning Cost Corner Profile TAE 90 Corner Profile TE 120 Corner Profile TE 60 Corner Profile TE/TAE 270 Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit Ø 20 mm Drill Bit Ø 25 mm Drill Bit Ø 35 mm EFD Paint orange, 5 L EFD Paint red, 1 L EFD Paint white, 1 L EFD Paint white, 5 L EFD Paint yellow, 1 L EFD Paint yellow, 5 L Fin-Ply 18 mm TAE 120/135°, left Fin-Ply 18 mm TAE 120/135°, right Fin-Ply 18 mm TAE 90 Fin-Ply 18 mm TAE 90/2 Fin-Ply 18 mm TE 120, left Fin-Ply 18 mm TE 120, right Fin-Ply 18 mm TE 120/2, left Fin-Ply 18 mm TE 120/2, right Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TE 60 Fin-Ply 18 mm TE 60/2 Fin-Ply 18 mm TE/4 330, left Fin-Ply 18 mm TE/4 330, right Fin-Ply 18 mm TEA 270/135° Fin-Ply 18 mm TEI 120/135°, left Fin-Ply 18 mm TEI 120/135°, right Fin-Ply 18 mm TEI 270/135° Fin-Ply 18 mm TR 120 x 120 Fin-Ply 18 mm TR 120 x 24 Fin-Ply 18 mm TR 120 x 240 Fin-Ply 18 mm TR 120 x 30 Fin-Ply 18 mm TR 120 x 60 Fin-Ply 18 mm TR 120 x 72 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 270 x 120 Fin-Ply 18 mm TR 270 x 24 Fin-Ply 18 mm TR 270 x 240 Fin-Ply 18 mm TR 270 x 240, 2 Sheets Fin-Ply 18 mm TR 270 x 72 Fin-Ply 18 mm TR 60 x 30 Fin-Ply 18 mm TR 60 x 72 Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR, THP 60 x 60 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR/4 330 x 120 Fin-Ply 18 mm TR/4 330 x 24 Fin-Ply 18 mm TR/4 330 x 240, 2 Sheets Fin-Ply 18 mm TR/4 330 x 30 Fin-Ply 18 mm TR/4 330 x 60 Fin-Ply 18 mm TR/4 330 x 72 Fin-Ply 18 mm TR/4 330 x 90 Fin-Ply 18 mm TRA 90 x 30
580 584 584 584 584 583 583 583 583 584 584 584 584 584 584 585 585 586 586 585 585 585 585 585 586 585 586 585 585 586 586 585 585 585 585 585 585 585 585 585 585 586 585 585 585 585 585 585 585 585 586 585 585 585 586 586 585 586 585 586 586 586 586 586 586 586 586
740273 740280 740280 740270 740270 740271 740271 745329 745348 745349 740309 740308 740310 071340 727165 750134 750135 030300 030320 083041 083042 083045 083044 083043 083046 083025 083030 083024 083029 083028 083027 083026 083015 083020 083014 083019 083018 083017 083016 083008 083013 083007 083009 083012 083011 083010 083037 083036 083035 083034 083023 083022 083021 083031 083033 083032 083040 083039 083038 083048 083047 083049 082041 082042 082045 082044 082043
Fin-Ply 18 mm TRM 120 x 72 l = 286 mm Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM, TAM 270 x 72 l = 1481 mm Fin-Ply 18 mm TRM, TAM 270 x 72 l = 1481 mm Fin-Ply 18 mm TRM, TAM 270/330 l = 513 mm Fin-Ply 18 mm TRM, TAM 270/330 l = 513 mm Fin-Ply 18 mm TRM, TRM/4 330 l = 998 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 383 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 531 mm Fin-Ply 18 mm TRS 120 x 90 Fin-Ply 18 mm TRS 270 x 90 Fin-Ply 18 mm TRS 60 x 90 Formwork Repair i.e. Weldings PACTAN Sealing, brown, 310 ccm Plastic Sleeve Corner DW 20 Plastic Sleeve DW 20 Plug Ø 20/24 mm Plug Ø 25 mm for TRS Repair Service RG, TAM 270 x 72 Repair Service RG, TAM 90 x 72 Repair Service RG, TE 120 Repair Service RG, TE 270 Repair Service RG, TE 330 Repair Service RG, TE 60 Repair Service RG, TR 120 x 120 Repair Service RG, TR 120 x 24 Repair Service RG, TR 120 x 240 Repair Service RG, TR 120 x 30 Repair Service RG, TR 120 x 60 Repair Service RG, TR 120 x 72 Repair Service RG, TR 120 x 90 Repair Service RG, TR 270 x 120 Repair Service RG, TR 270 x 24 Repair Service RG, TR 270 x 240 Repair Service RG, TR 270 x 30 Repair Service RG, TR 270 x 60 Repair Service RG, TR 270 x 72 Repair Service RG, TR 270 x 90 Repair Service RG, TR 330 x 120 Repair Service RG, TR 330 x 24 Repair Service RG, TR 330 x 240 Repair Service RG, TR 330 x 30 Repair Service RG, TR 330 x 60 Repair Service RG, TR 330 x 72 Repair Service RG, TR 330 x 90 Repair Service RG, TR 60 x 30 Repair Service RG, TR 60 x 60 Repair Service RG, TR 60 x 72 Repair Service RG, TR 60 x 90 Repair Service RG, TRA 270 x 30 Repair Service RG, TRA 270 x 60 Repair Service RG, TRA 270 x 90 Repair Service RG, TRA 90 x 120 Repair Service RG, TRA 90 x 30 Repair Service RG, TRA 90 x 60 Repair Service RG, TRM 120 x 72 Repair Service RG, TRM 270 x 72 Repair Service RG, TRM 330 x 72 Repair Service RG, TRS 120 x 90 Repair Service RG, TRS 270 x 90 Repair Service RG, TRS 60 x 90 Repair Service RK, TAM 270 x 72 Repair Service RK, TAM 90 x 72 Repair Service RK, TE 120 Repair Service RK, TE 270 Repair Service RK, TE 330
585 585 586 585 586 585 586 586 586 586 585 585 585 583 583 584 584 584 584 582 582 581 582 582 581 581 581 581 581 581 581 581 582 582 582 582 582 582 582 582 582 582 582 582 582 582 581 581 581 581 582 582 582 582 582 582 581 582 582 582 582 582 581 581 580 580 580
Formwork Girders
TRIO Cleaning, Repair (Custom Formwork)
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 581 581 581 581 581 581 580 580 580 581 581 581 583 583 580 583 583 584 584 584 584
Plywood, SystemIndependent Accessories
Repair Service RK, TE 60 Repair Service RK, TR 120 x 120 Repair Service RK, TR 120 x 24 Repair Service RK, TR 120 x 240 Repair Service RK, TR 120 x 30 Repair Service RK, TR 120 x 60 Repair Service RK, TR 120 x 72 Repair Service RK, TR 120 x 90 Repair Service RK, TR 270 x 120 Repair Service RK, TR 270 x 24 Repair Service RK, TR 270 x 240 Repair Service RK, TR 270 x 30 Repair Service RK, TR 270 x 60 Repair Service RK, TR 270 x 72 Repair Service RK, TR 270 x 90 Repair Service RK, TR 330 x 120 Repair Service RK, TR 330 x 24 Repair Service RK, TR 330 x 240 Repair Service RK, TR 330 x 30 Repair Service RK, TR 330 x 60 Repair Service RK, TR 330 x 72 Repair Service RK, TR 330 x 90 Repair Service RK, TR 60 x 30 Repair Service RK, TR 60 x 60 Repair Service RK, TR 60 x 72 Repair Service RK, TR 60 x 90 Repair Service RK, TRA 270 x 30 Repair Service RK, TRA 270 x 60 Repair Service RK, TRA 270 x 90 Repair Service RK, TRA 90 x 120 Repair Service RK, TRA 90 x 30 Repair Service RK, TRA 90 x 60 Repair Service RK, TRM 120 x 72 Repair Service RK, TRM 270 x 72 Repair Service RK, TRM 330 x 72 Repair Service RK, TRS 120 x 90 Repair Service RK, TRS 270 x 90 Repair Service RK, TRS 60 x 90 Rivet DIN 7337 B 5 x 30, Alu Rivet Gun BZ 48, l = 500 mm RS Cleaning Service TRIO Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 60 mm in Surface Sleeve 18 -DW 20, Base Piece Sleeve 18 -DW 20, Head Piece Spring 4,6 x 18 x 1338 mm Stacking Aid TRIO DW 20
579
Service
082046 082025 082030 082024 082029 082028 082027 082026 082015 082020 082014 082019 082018 082017 082016 082008 082013 082007 082012 082011 082010 082009 082037 082036 082035 082034 082023 082022 082021 082031 082033 082032 082040 082039 082038 082048 082047 082049 730050 044890 071202 071217 071216 750132 750133 750040 750303
Formwork Girders
Item no. Weight kg 071202 071204
0,000 0,000
082034 082035 082036 082037 082046
0,000 0,000 0,000 0,000 0,000
082024 082025 082026 082027 082028 082029 082030 082040 082045
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
082014 082015 082016 082017 082018 082019 082020 082039 082044
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
082007 082008 082009 082010 082011 082012 082013 082038 082043
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
TRIO Cleaning, Repair (Custom Formwork)
580
Reinigungsservice RS RS Cleaning Service TRIO Additional Cleaning Cost Cleaning of TRIO Panel Formwork. Repair Service RK Small, TRIO Steel 0.60 m Repair Service RK, TR 60 x 90 Repair Service RK, TR 60 x 72 Repair Service RK, TR 60 x 60 Repair Service RK, TR 60 x 30 Repair Service RK, TE 60 Includes Cleaning Service RS and fitting of new plywood sheets.
Repair Service RK Small, TRIO Steel 1.20 m Repair Service RK, TR 120 x 240 Repair Service RK, TR 120 x 120 Repair Service RK, TR 120 x 90 Repair Service RK, TR 120 x 72 Repair Service RK, TR 120 x 60 Repair Service RK, TR 120 x 30 Repair Service RK, TR 120 x 24 Repair Service RK, TRM 120 x 72 Repair Service RK, TE 120 Includes Cleaning Service RS and fitting of new plywood sheets.
Repair Service RK Small, TRIO Steel 2.70 m Repair Service RK, TR 270 x 240 Repair Service RK, TR 270 x 120 Repair Service RK, TR 270 x 90 Repair Service RK, TR 270 x 72 Repair Service RK, TR 270 x 60 Repair Service RK, TR 270 x 30 Repair Service RK, TR 270 x 24 Repair Service RK, TRM 270 x 72 Repair Service RK, TE 270 Includes Cleaning Service RS and fitting of new plywood sheets.
Repair Service RK Small, TRIO Steel 3.30 m Repair Service RK, TR 330 x 240 Repair Service RK, TR 330 x 120 Repair Service RK, TR 330 x 90 Repair Service RK, TR 330 x 72 Repair Service RK, TR 330 x 60 Repair Service RK, TR 330 x 30 Repair Service RK, TR 330 x 24 Repair Service RK, TRM 330 x 72 Repair Service RK, TE 330 Includes Cleaning Service RS and fitting of new plywood sheets.
Formwork Girders
TRIO Cleaning, Repair (Custom Formwork) Item no. Weight kg
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Wall Formwork
083024 083025 083026 083027 083028 083029 083030 083040 083045
Column Formwork
0,000 0,000 0,000 0,000 0,000
Slab Formwork
083034 083035 083036 083037 083046
Repair Service RK Small, TRIO Column Repair Service RK, TRS 270 x 90 Repair Service RK, TRS 120 x 90 Repair Service RK, TRS 60 x 90 Includes Cleaning Service RS and fitting of new plywood sheets.
Shoring Systems
0,000 0,000 0,000
Repair Service RG Large, TRIO Steel 0.60 m Repair Service RG, TR 60 x 90 Repair Service RG, TR 60 x 72 Repair Service RG, TR 60 x 60 Repair Service RG, TR 60 x 30 Repair Service RG, TE 60 Includes Repair Service RK Small and refurbishment of frames.
Climbing Systems
082047 082048 082049
Repair Service RK Small, TRIO Alu 2.70 m Repair Service RK, TRA 270 x 90 Repair Service RK, TRA 270 x 60 Repair Service RK, TRA 270 x 30 Repair Service RK, TAM 270 x 72 Includes Cleaning Service RS and fitting of new plywood sheets.
Scaffolding, Stairs, Working Platforms
0,000 0,000 0,000 0,000
Repair Service RG Large, TRIO Steel 1.20 m Repair Service RG, TR 120 x 240 Repair Service RG, TR 120 x 120 Repair Service RG, TR 120 x 90 Repair Service RG, TR 120 x 72 Repair Service RG, TR 120 x 60 Repair Service RG, TR 120 x 30 Repair Service RG, TR 120 x 24 Repair Service RG, TRM 120 x 72 Repair Service RG, TE 120 Includes Repair Service RK Small and refurbishment of frames.
Bridge- and Tunnel Formwork
082021 082022 082023 082041
Repair Service RK Small, TRIO Alu 0.90 m Repair Service RK, TRA 90 x 120 Repair Service RK, TRA 90 x 60 Repair Service RK, TRA 90 x 30 Repair Service RK, TAM 90 x 72 Includes Cleaning Service RS and fitting of new plywood sheets.
Plywood, SystemIndependent Accessories
0,000 0,000 0,000 0,000
581
Service
082031 082032 082033 082042
Formwork Girders
Item no. Weight kg 083014 083015 083016 083017 083018 083019 083020 083044 083039
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
083007 083008 083010 083011 083012 083009 083013 083038 083043
0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
083031 083032 083033 083042
0,000 0,000 0,000 0,000
083021 083022 083023 083041
0,000 0,000 0,000 0,000
083047 083048 083049
0,000 0,000 0,000
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
TRIO Cleaning, Repair (Custom Formwork)
582
Repair Service RG Large, TRIO Steel 2.70 m Repair Service RG, TR 270 x 240 Repair Service RG, TR 270 x 120 Repair Service RG, TR 270 x 90 Repair Service RG, TR 270 x 72 Repair Service RG, TR 270 x 60 Repair Service RG, TR 270 x 30 Repair Service RG, TR 270 x 24 Repair Service RG, TE 270 Repair Service RG, TRM 270 x 72 Includes Repair Service RK Small and refurbishment of frames.
Repair Service RG Large, TRIO Steel 3.30 m Repair Service RG, TR 330 x 240 Repair Service RG, TR 330 x 120 Repair Service RG, TR 330 x 90 Repair Service RG, TR 330 x 72 Repair Service RG, TR 330 x 60 Repair Service RG, TR 330 x 30 Repair Service RG, TR 330 x 24 Repair Service RG, TRM 330 x 72 Repair Service RG, TE 330 Includes Repair Service RK Small and refurbishment of frames.
Repair Service RG Large, TRIO Alu 0.90 m Repair Service RG, TRA 90 x 120 Repair Service RG, TRA 90 x 60 Repair Service RG, TRA 90 x 30 Repair Service RG, TAM 90 x 72 Includes Repair Service RK Small and refurbishment of frames.
Repair Service RG Large, TRIO Alu 2.70 m Repair Service RG, TRA 270 x 90 Repair Service RG, TRA 270 x 60 Repair Service RG, TRA 270 x 30 Repair Service RG, TAM 270 x 72 Includes Repair Service RK Small and refurbishment of frames.
Repair Service RG Large, TRIO Column Repair Service RG, TRS 270 x 90 Repair Service RG, TRS 120 x 90 Repair Service RG, TRS 60 x 90 Includes Repair Service RK Small and refurbishment of frames.
Formwork Girders
TRIO Cleaning, Repair (Custom Formwork) 071216 071217
0,000 0,000
Sealing Holes in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 40 mm in Surface Repair of plywood sheets.
071340
0,000
Formwork Repair i.e. Weldings
031040 031080 031030
0,040 0,055 0,090
Drill Drill Drill Drill
Wall Formwork
Item no. Weight kg
Column Formwork
Bits Bit Ø 20 mm Bit Ø 25 mm Bit Ø 35 mm
044890
2,120
Slab Formwork
.
Rivet Gun BZ 48, l = 500 mm For installing blind rivets Ø 5mm.
Climbing Systems
0,010
Drill Bit HSS DIN 338, Ø 5,1 mm For pre-drilling blind rivets Ø 5 mm.
Scaffolding, Stairs, Working Platforms
727112
Shoring Systems
.
730050
0,004
Bridge- and Tunnel Formwork
.
Rivet DIN 7337 B 5 x 30, Alu
29
0,430
PACTAN Sealing, brown, 310 ccm
583
Service
727165
Plywood, SystemIndependent Accessories
Ø5
Formwork Girders Wall Formwork Column Formwork
Item no. Weight kg 750135 750134 750133 750132 750040
0,031 0,030 0,005 0,005 0,070
Accessories TRIO Plastic Sleeve DW 20 Plastic Sleeve Corner DW 20 Sleeve 18 -DW 20, Head Piece Sleeve 18 -DW 20, Base Piece Spring 4,6 x 18 x 1338 mm
727056 727057 727058 727059 727060 727061
1,200 1,180 1,200 1,180 1,200 1,180
EFD EFD EFD EFD EFD EFD EFD
700843 700845 700846 700844
4,090 1,800 0,890 1,340
Corner Corner Corner Corner Corner
750303
0,022
Paints Paint red, 1 L Paint orange, 5 L Paint yellow, 1 L Paint yellow, 5 L Paint white, 1 L Paint white, 5 L
Profiles, painted Profile TE/TAE 270 Profile TE 120 Profile TE 60 Profile TAE 90
25
Stacking Aid TRIO DW 20 Prevents elements sliding and protects the plywood formlining against damage. 22
Climbing Systems
Shoring Systems
Slab Formwork
TRIO Cleaning, Repair (Custom Formwork)
0,003
Plug Ø 20/24 mm For sealing tie holes Ø 20 and Ø 24mm which are not required.
17 20
030320
0,004
Plug Ø 25 mm for TRS For closing unused tie holes Ø 25 mm and with TRIO column formwork.
Service
584
23
21
25
Plywood, SystemIndependent Accessories
Note Delivery unit of 250 pieces.
Ø 29
030300
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
56
Item no. Weight kg Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Spare Plywood TRIO Steel 0.60 m Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR 60 x 72 Fin-Ply 18 mm TR, THP 60 x 60 Fin-Ply 18 mm TR 60 x 30 Fin-Ply 18 mm TE 60 Fin-Ply 18 mm TE 60/2
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
35,400 17,400 13,100 10,400 8,600 4,190 3,130 4,000 4,000 3,860 3,860 6,490 2,510 2,340 2,340 3,940 3,940
Spare Plywood TRIO 1.20 m Fin-Ply 18 mm TR 120 x 240 Fin-Ply 18 mm TR 120 x 120 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 120 x 72 Fin-Ply 18 mm TR 120 x 60 Fin-Ply 18 mm TR 120 x 30 Fin-Ply 18 mm TR 120 x 24 Fin-Ply 18 mm TE 120, right Fin-Ply 18 mm TE 120, left Fin-Ply 18 mm TE 120/2, right Fin-Ply 18 mm TE 120/2, left Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM 120 x 72 l = 286 mm Fin-Ply 18 mm TEI 120/135°, left Fin-Ply 18 mm TEI 120/135°, right Fin-Ply 18 mm TAE 120/135°, left Fin-Ply 18 mm TAE 120/135°, right
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
80,800 80,800 39,600 29,500 23,400 19,400 9,230 7,210 9,100 8,750 13,000 3,630 5,300 8,950
Spare Plywood TRIO Steel 2.70 m Fin-Ply 18 mm TR 270 x 240 Fin-Ply 18 mm TR 270 x 240, 2 Sheets Fin-Ply 18 mm TR 270 x 120 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR 270 x 72 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR 270 x 24 Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TRM, TAM 270 x 72 l = 1481 mm Fin-Ply 18 mm TRM, TAM 270/330 l = 513 mm Fin-Ply 18 mm TEI 270/135° Fin-Ply 18 mm TEA 270/135°
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Column Formwork Slab Formwork Shoring Systems Climbing Systems
745303 745300 740251 740252 740256 740255 740257 740323 745560 745324 740270 740271 103311 103333
Scaffolding, Stairs, Working Platforms
745305 740275 740276 740277 740278 740279 740324 745570 745569 745323 745322 740280 740273 103274 103275 103321 103323
Bridge- and Tunnel Formwork
6,290 4,990 4,120 1,940 2,000 1,900
Plywood, SystemIndependent Accessories
740284 740285 740286 740287 745580 745321
585
Service
29,100 13,000 6,210
Wall Formwork
Spare Plywood for TRIO Column Fin-Ply 18 mm TRS 270 x 90 Fin-Ply 18 mm TRS 120 x 90 Fin-Ply 18 mm TRS 60 x 90 Replacement plywood formliner for Column Panel TRS.
740308 740309 740310
Formwork Girders
TRIO Cleaning, Repair (Custom Formwork)
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems
Item no. Weight kg 745340 745341 745342 745343 745344 745345 740322 745346 745347 745348 745349 745329
98,990 49,100 36,600 28,700 24,100 11,600 9,020 10,800 10,800 3,500 4,520 8,910
Spare Plywood TRIO 3.30 m Fin-Ply 18 mm TR/4 330 x 240, 2 Sheets Fin-Ply 18 mm TR/4 330 x 120 Fin-Ply 18 mm TR/4 330 x 90 Fin-Ply 18 mm TR/4 330 x 72 Fin-Ply 18 mm TR/4 330 x 60 Fin-Ply 18 mm TR/4 330 x 30 Fin-Ply 18 mm TR/4 330 x 24 Fin-Ply 18 mm TE/4 330, right Fin-Ply 18 mm TE/4 330, left Fin-Ply 18 mm TRM/4 330 x 72 l = 383 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 531 mm Fin-Ply 18 mm TRM, TRM/4 330 l = 998 mm
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
740276 740284 740770 745645 745319 740280
13,100 6,290 2,980 2,380 2,880 6,490
Spare Plywood TRIO Alu 0.90 m Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TRA 90 x 30 Fin-Ply 18 mm TAE 90 Fin-Ply 18 mm TAE 90/2 Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
740252 740255 740257 745560 745324 740270 740271
29,500 19,400 9,230 9,100 8,750 13,000 3,630
Spare Plywood TRIO Alu 2.70 m Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TRM, TAM 270 x 72 l = 1481 mm Fin-Ply 18 mm TRM, TAM 270/330 l = 513 mm
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
TRIO Cleaning, Repair (Custom Formwork)
586
Service
587
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Service
588
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
DOMINO Cleaning, Repair (Custom Formwork)
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
590 590 590 590 590 590 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 590 590 590 590
Plywood, SystemIndependent Accessories
Additional Cleaning Cost Cleaning Plywood and Frame DOMINO Drill Bit HSS DIN 338, Ø 5.1 mm Drill Bit Ø 20 mm Drill Bit Ø 25 mm Drill Bit Ø 35 mm Fin-Ply 15 mm D 125 x 100 Fin-Ply 15 mm D 125 x 20 Fin-Ply 15 mm D 125 x 25 Fin-Ply 15 mm D 125 x 30 Fin-Ply 15 mm D 125 x 35 Fin-Ply 15 mm D 125 x 40 Fin-Ply 15 mm D 125 x 50 Fin-Ply 15 mm D 125 x 75 Fin-Ply 15 mm D 250 x 100 Fin-Ply 15 mm D 250 x 20 Fin-Ply 15 mm D 250 x 25 Fin-Ply 15 mm D 250 x 30 Fin-Ply 15 mm D 250 x 35 Fin-Ply 15 mm D 250 x 40 Fin-Ply 15 mm D 250 x 50 Fin-Ply 15 mm D 250 x 75 Fin-Ply 15 mm D 75 x 100 Fin-Ply 15 mm D 75 x 20 Fin-Ply 15 mm D 75 x 25 Fin-Ply 15 mm D 75 x 30 Fin-Ply 15 mm D 75 x 35 Fin-Ply 15 mm D 75 x 40 Fin-Ply 15 mm D 75 x 50 Fin-Ply 15 mm D 75 x 75 Fin-Ply 15 mm DM 125 x 75 Fin-Ply 15 mm DM 250 x 75 Fin-Ply 15 mm DM 75 x 75 PACTAN Sealing, brown, 310 ccm Rivet DIN 7337 B 5 x 30, Alu Rivet Gun BZ 48, l = 500 mm Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 60 mm in Surface
589
Service
071204 071200 727112 031040 031080 031030 740458 740526 740461 740525 740524 740523 740460 740459 740454 740522 740457 740499 740498 740497 740456 740455 740462 740531 740465 740529 740528 740527 740464 740463 740468 740467 740469 727165 730050 044890 071217 071216
Formwork Girders
Item no. Weight kg 071200 071204
0,000 0,000
Cleaning Service RS Cleaning Plywood and Frame DOMINO Additional Cleaning Cost Cleaning of DOMINO Panel Formwork.
071216 071217
0,000 0,000
Sealing Holes in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 40 mm in Surface Repair of plywood sheets.
031040 031080 031030
0,040 0,055 0,090
Drill Drill Drill Drill
Bit Bit Ø 20 mm Bit Ø 25 mm Bit Ø 35 mm
.
044890
2,120
Rivet Gun BZ 48, l = 500 mm For installing blind rivets Ø 5mm.
.
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
DOMINO Cleaning, Repair (Custom Formwork)
727112
0,010
Drill Bit HSS DIN 338, Ø 5,1 mm For pre-drilling blind rivets Ø 5 mm.
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
.
730050
0,004
Rivet DIN 7337 B 5 x 30, Alu
29 Ø5
590
Formwork Girders
PACTAN Sealing, brown, 310 ccm
740462 740463 740464 740527 740528 740529 740465 740531 740469
7,710 5,770 3,830 3,000 2,610 2,230 1,890 1,450 5,320
Spare Plywood DOMINO 0.75 m Fin-Ply 15 mm D 75 x 100 Fin-Ply 15 mm D 75 x 75 Fin-Ply 15 mm D 75 x 50 Fin-Ply 15 mm D 75 x 40 Fin-Ply 15 mm D 75 x 35 Fin-Ply 15 mm D 75 x 30 Fin-Ply 15 mm D 75 x 25 Fin-Ply 15 mm D 75 x 20 Fin-Ply 15 mm DM 75 x 75
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
740458 740459 740460 740461 740523 740524 740525 740526 740468
12,900 9,670 6,390 3,150 5,040 4,390 3,740 2,440 9,190
Spare Plywood DOMINO 1.25 m Fin-Ply 15 mm D 125 x 100 Fin-Ply 15 mm D 125 x 75 Fin-Ply 15 mm D 125 x 50 Fin-Ply 15 mm D 125 x 25 Fin-Ply 15 mm D 125 x 40 Fin-Ply 15 mm D 125 x 35 Fin-Ply 15 mm D 125 x 30 Fin-Ply 15 mm D 125 x 20 Fin-Ply 15 mm DM 125 x 75
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
740454 740455 740456 740457 740497 740498 740499 740522 740467
25,800 19,300 12,800 6,250 10,100 8,800 7,500 4,890 18,800
Spare Plywood DOMINO 2.50 m Fin-Ply 15 mm D 250 x 100 Fin-Ply 15 mm D 250 x 75 Fin-Ply 15 mm D 250 x 50 Fin-Ply 15 mm D 250 x 25 Fin-Ply 15 mm D 250 x 40 Fin-Ply 15 mm D 250 x 35 Fin-Ply 15 mm D 250 x 30 Fin-Ply 15 mm D 250 x 20 Fin-Ply 15 mm DM 250 x 75
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
591
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Item no. Weight kg 727165 0,430
Wall Formwork
DOMINO Cleaning, Repair (Custom Formwork)
Service
592
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
SKYDECK Cleaning, Repair (Custom Formwork)
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
594 595 595 595 595 595 595 595 594 595 594 594 594 594 594 594 595 594 594 594 594
Plywood, SystemIndependent Accessories
Additional Cleaning Cost Drill Bit HSS DIN 338, Ø 5,1 mm Fin-Ply 9 mm SDP 150 x 37,5 Fin-Ply 9 mm SDP 150 x 50 Fin-Ply 9 mm SDP 150 x 75 Fin-Ply 9 mm SDP 75 x 37,5 Fin-Ply 9 mm SDP 75 x 50 Fin-Ply 9 mm SDP 75 x 75 Formwork Repair i.e. Weldings PACTAN Sealing, brown, 310 ccm Repair Service RK, SDP 150 x 37,5 Repair Service RK, SDP 150 x 50 Repair Service RK, SDP 150 x 75 Repair Service RK, SDP 75 x 37,5 Repair Service RK, SDP 75 x 50 Repair Service RK, SDP 75 x 75 Rivet DIN 7337 B 5 x 20, GAV Rivet Gun BZ 48, l = 500 mm RS Cleaning Service SKYDECK Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 60 mm in Surface
593
Service
071204 727112 052810 052816 052090 052815 052818 052130 071340 727165 082003 082002 082001 082006 082005 082004 780305 044890 071209 071217 071216
Item no. Weight kg Cleaning Service RS RS Cleaning Service SKYDECK Additional Cleaning Cost Cleaning of SKYDECK Slab Formwork.
071209 071204
0,000 0,000
082001 082002 082003 082004 082005 082006
0,000 0,000 0,000 0,000 0,000 0,000
071216 071217
0,000 0,000
Sealing Holes Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 40 mm in Surface Repair of plywood sheets.
071340
0,000
Formwork Repair i.e. Weldings
044890
2,120
Rivet Gun BZ 48, l = 500 mm For installing blind rivets Ø 5mm.
Repair Service RK Repair Service RK, SDP 150 x 75 Repair Service RK, SDP 150 x 50 Repair Service RK, SDP 150 x 37,5 Repair Service RK, SDP 75 x 75 Repair Service RK, SDP 75 x 50 Repair Service RK, SDP 75 x 37,5 Includes Cleaning Service RS and fitting of new plywood sheets.
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
SKYDECK Cleaning, Repair (Custom Formwork)
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
.
594
Formwork Girders
SKYDECK Cleaning, Repair (Custom Formwork) Drill Bit HSS DIN 338, Ø 5,1 mm For pre-drilling blind rivets Ø 5 mm.
Rivet DIN 7337 B 5 x 20, GAV
Column Formwork
0,005
20
6,850 4,520 3,350 3,390 2,240 1,660
Spare Plywood SKYENCK Fin-Ply 9 mm SDP 150 x 75 Fin-Ply 9 mm SDP 150 x 50 Fin-Ply 9 mm SDP 150 x 37,5 Fin-Ply 9 mm SDP 75 x 75 Fin-Ply 9 mm SDP 75 x 50 Fin-Ply 9 mm SDP 75 x 37,5 Spare Plywood for SKYDECK.
Note Cross-bonded birch veneers. Coated with 220 g/m² reinforced phenolic resin on both sides. Edges sealed all round. BFU 100 bonding according to DIN 68705, T.3 and DIN EN 314-2.
Climbing Systems
052090 052816 052810 052130 052818 052815
Scaffolding, Stairs, Working Platforms
PACTAN Sealing, brown, 310 ccm
Bridge- and Tunnel Formwork
0,430
Plywood, SystemIndependent Accessories
727165
Slab Formwork
Ø5
Shoring Systems
780305
Wall Formwork
.
595
Service
Item no. Weight kg 727112 0,010
Service
596
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms Climbing Systems Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders
Technical Planning
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
598 598 598 598 598 598 598 598 598 598 598 598 598
Plywood, SystemIndependent Accessories
Assembly on Site Design Calculation Design Work and Technical Advice Design Work incl. Cycle Plans, Parts List Shop Drawings for ASG 160, FB 180 Shop Drawings for KG, CB, SKS Shop Drawings for MULTIFLEX Shop Drawings for MX, TRIO, DO, HS Shop Drawings for SKYDECK Shop Drawings for Slab Tables Shop Drawings for Special Forms Structural Calculation for Approval Supervisor
597
Service
071271 071290 071350 071362 071358 071359 071356 071351 071355 071357 071361 071291 071364
Item no. Weight kg 071351 071352 071353 071354
0,000 0,000 0,000 0,000
071355 071356 071357
0,000 0,000 0,000
071358 071359
0,000 0,000
071361 071362
0,000 0,000
071290 071291 071350 071271
0,000 0,000 0,000 0,000
071364
0,000
Service
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Technical Planning
598
Shop Drawings for Wall Formworks Shop Drawings for MX, TRIO, DO, HS Shop Drawings for VARIO, RUNDFLEX Allowance For Single Sided Applicat. Allowance for Double Sided Applicat. Technical processing, formwork planning and project development.
Shop Drawings for Slab Formworks Shop Drawings for SKYENCK Shop Drawings for MULTIFLEX Shop Drawings for Slab Tables Technical processing, formwork planning and project development.
Shop Drawings for Climbing-, Platform Sys. Shop Drawings for FB 180 Shop Drawings for RCS, CB, SKS Technical processing, formwork planning and project development. Shop Drawings for Special Forms Shop Drawings for Special Forms Design Work incl. Cycle Plans, Parts List Technical processing, formwork planning and project development. Design Calculations, Technical Planning Design Calculation Structural Calculation for Approval Design Work and Technical Advice Assembly on Site Technical processing, formwork planning and project development.
Supervisor Assembly work plus travel costs, expenses and overnight accommodation.
Service
599
Plywood, SystemIndependent Accessories
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Formwork Girders
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 050070 050190 050080 050040 052590 050000 050200 050030 052380
3-Ply Panel 21 mm 1500 x 500 mm (red/yell) 3-Ply Panel 21 mm 2000 x 1000 mm (yellow) 3-Ply Panel 21 mm 2000 x 500 mm (red/yell) 3-Ply Panel 21 mm 2500 x 1000 mm (yellow) 3-Ply Panel 21 mm 2500 x 1500 mm (yellow) 3-Ply Panel 21 mm 2500 x 500 mm (red/yell) 3-Ply Panel 21 mm 3000 x 1000 mm (yellow) 3-Ply Panel 21 mm 5000 x 1000 mm (yellow) 3-Ply Panel 21 mm 5000 x 2000 mm (yellow)
523 523 523 523 523 523 523 523 523
114811 114825 114812 030663 030664 045200 071204 071204 071204 010350 104305 100411 100411 100242 100242 100159 051110 021240 021250 021610 021620 022400 051130 113933 029270 029270 023940 023500 023500 023500 023500 066080 027212 027212 027212 027212 027212 079300 079360 079420 079480 079540 079600 103606 103606 103606 103606 103606 103606 065073 065073 065073 026636 026636 027480 029280 029280
Access Deck UAL 64 x 200/3 Access Deck UAL 64 x 250/3 Access Deck UAL 64 x 300/3 Adapter I for Pretension Jack Adapter III for Pretension Jack Adapter Strip SRS-TRIO l = 3,00 m Additional Cleaning Cost Additional Cleaning Cost Additional Cleaning Cost Additional Row of SRZ Slots Adj. Base Plate UJB 38-27/17 Adj. Base Plate UJB 38-50/30 Adj. Base Plate UJB 38-50/30 Adj. Base Plate UJB 38-80/55 Adj. Base Plate UJB 38-80/55 Adj. Base Plate UJS 38-80/50 Swivel Adjustable Brace CB 164-224 Adjusting Bolt STS 260, galv. Adjusting Bolt STS 360, galv. Adjusting Spindle 210, galv. Adjusting Spindle 500, galv. Adjusting Spindle RKR, compl.. Adjusting Unit CB 160 Adjusting Unit VARIOKIT Advancing Screw M24, galv. Advancing Screw M24, galv. Alignment Coupler 38, galv. Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Alignment Coupler DRS Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Alu Beam MPB 24 l = 3.00 m Alu Beam MPB 24 l = 3.60 m Alu Beam MPB 24 l = 4.20 m Alu Beam MPB 24 l = 4.80 m Alu Beam MPB 24 l = 5.40 m Alu Beam MPB 24 l = 6.00 m Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Chain 3,0 kN l = 2.5 m Anchor Chain 3,0 kN l = 2.5 m Anchor Chain 3,0 kN l = 2.5 m Anchor Loop Anchor Loop Anchor Plate SB - DW 26 Anchor Positioning Plate M24, galv. Anchor Positioning Plate M24, galv.
467 467 467 222 222 292 580 590 594 133 460 374 460 374 460 460 425 167 167 161 161 153 424 499 435 408 161 27 61 161 266 104 199 438 410 418 553 354 354 354 354 354 354 87 208 251 297 273 289 314 307 575 409 416 195 435 408
600
029390 026440 026420 026420 026420 026420 026460 026280 026230 026230 026230 026230 102111 108360 027650 027530 109017 113847 112387 112464 123478 111283 107607 107600 107608 107601 052839 023301 023201 066047 066029 066067 034230 034200 034210 111850 111872 114607 113246 113203 114583 023200 054414 023300 103054 013220 013210 013230 115375 115375 021150 021140 021130 021120 021110 027930 027930 071271 028720 065075 065072 065071 065070
Anchor Positioning Plate M36, galv. Anchor Positioning Stud f. AH-DW 15, Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M36, galv. Anchor Sleeve DW 15 Anchor Sleeve M24 Anchor Sleeve M24 Anchor Sleeve M24 Anchor Sleeve M24 Anchor Sleeve M24, galv. Anchor Sleeve M24, Special, Stainless Steel Anchor Waler U140 l = 0,55 m Anchor Waler U140 l = 2,35 m Anchor Waler U160 l = 0,55 m Anchors MX 15-25 Anchors MX 20-30 Anchors MX 30-40 Angle Bracket 90° Angle Connector RCS/SRU Angle TRH 180 x 15 Angle TRH 180 x 6 Angle TRH 270 x 15 Angle TRH 270 x 6 Arauco Pine 21 mm 2500 x 1250 mm Artic. Corner TRIO Structure TSGE 120 Artic. Corner TRIO Structure TSGE 270 Articulated Corner DGE 125 Articulated Corner DGE 250 Articulated Corner DGE 75 Articulated Corner HSG 120 Articulated Corner HSG 150 Articulated Corner HSG 90 Articulated Corner MXGA 120 Articulated Corner MXGA 270 Articulated Corner MXGA 330 Articulated Corner MXGI 120 Articulated Corner MXGI 270 Articulated Corner MXGI 330 Articulated Corner TGE 270 Articulated Corner TGE/4 330 Articulated Corner TGE120 Articulated Coupling GKS 60/60 S Articulated Coupling GKZ 60/60 Articulated Coupling GKZ 76/76 Articulated Coupling GKZ Spec. Length Articulated Spanner RCS DW 15 Articulated Spanner RCS DW 15 Articulated Spindle Waler GSRV 65-90 Articulated Waler GRV 30 Articulated Waler GRV 60 Articulated Waler GRV 75 Articulated Waler GRV 90 Assembly Bar 24, galv. Assembly Bar 24, galv. Assembly on Site Attachment 100 for Striking Trolley AW Bracket AW Clamp 8-10 AW Handrail Post AW Slab Stopend Angle
199 215 435 408 417 515 199 215 406 417 441 514 514 514 195 196 195 33 33 33 576 497 84 84 84 84 523 61 60 100 96 103 116 113 119 23 19 14 23 19 14 48 42 53 141 140 140 140 216 503 166 166 166 166 166 324 553 598 338 344 343 343 343
102210 022019 100870
Back Stop Lifting Fork 1 t / 5,0 m Base Adapter HD Base Beam UVA 250
337 388 475
601
Formwork Girders Wall Formwork Column Formwork Slab Formwork
406 417 427 442 558 558 558 198 558 558 558 137 558 137 137 558 558 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 559 560 559 199 559 322 565 405 208 565 208 566 107 64 181 566 174 256 566 245 284 568 568 256 142 353 354 499 567 566 567 567
Shoring Systems
Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 80-10.9, galv. Bolt ISO 4014 M30 x 130-10.9, galv. Bolt ISO 4014 M36 x 130-10.9, galv. Bolt ISO 4014 M36 x 130-10.9, galv. Bolt ISO 4014 M8 x 100-8.8, galv. Bolt ISO 4014 M8 x 140-8.8, galv. Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 180-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Bolt ISO 4014 M8 x 60-8.8, galv. Bolt ISO 4016 M12 x 120-4.6 MU, galv. Bolt ISO 4016 M12 x 140-4.6 MU, galv. Bolt ISO 4016 M12 x 180-4.6 MU, galv. Bolt ISO 4016 M12 x 40-4.6 MU, galv. Bolt ISO 4016 M16 x 140-4.6 MU, galv. Bolt ISO 4016 M16 x 160-4.6 MU, galv. Bolt ISO 4016 M16 x 280-4.6 MU, galv. Bolt ISO 4016 M8 x 25-4.6 MU, galv. Bolt ISO 4017 M12 x 140-8.8, galv. Bolt ISO 4017 M12 x 240-8.8, galv. Bolt ISO 4017 M12 x 25-8.8, galv. Bolt ISO 4017 M12 x 30-8.8, galv. Bolt ISO 4017 M12 x 40-8.8, galv. Bolt ISO 4017 M16 x 30-8.8, galv. Bolt ISO 4017 M16 x 45-8.8, galv. Bolt ISO 4017 M16 x 50-8.8, galv. Bolt ISO 4017 M20 x 100-8.8, galv. Bolt ISO 4017 M20 x 40-8,8, galv. Bolt ISO 4017 M20 x 50-8.8, galv. Bolt ISO 4017 M24 x 50-10.9, galv. Bolt ISO 4017 M30 x 70-8.8, galv. Bolt ISO 4017 M36 x 70-8.8, galv. Bolt ISO 4017 M36 x 70-8.8, galv. Bolt Ø 14 x 107, galv. Bolt Ø 14 x 107, galv. Bolt Ø 16 x 150, galv. Bolt Ø 16 x 42, galv. Bolt Ø 16 x 42, galv. Bolt Ø 16 x 65/86, galv. Bolt Ø 16 x 65/86, galv. Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Bolt Ø 20 x 102, galv. Bolt Ø 20 x 140, galv. Bolt Ø 20 x 140, galv. Bolt Ø 20 x 205, galv. Bolt Ø 20 x 205, galv. Bolt Ø 20 x 205, galv. Bolt Ø 20 x 260, galv. Bolt Ø 20 x 42, galv. Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 25 x 154, galv. Bolt Ø 25 x 160, KG, galv. Bolt Ø 50 x 330, galv.
Climbing Systems
026430 026430 026430 026430 026430 026220 029540 029550 029550 710285 722859 104929 104929 107185 103518 103518 710284 070100 018330 027340 035440 018320 018350 103740 780353 110598 110599 710266 102120 710224 710231 710225 710252 114727 706458 780357 026290 029420 029430 029430 027990 027990 715357 027170 027170 018050 018050 027690 027690 027690 027690 105822 105400 105400 037160 037160 037160 113012 724500 104031 104031 104031 104031 104031 107579 026200 105435
Scaffolding, Stairs, Working Platforms
350 202 315 307 390 255 374 461 204 187 203 176 251 279 297 272 261 289 87 72 377 461 366 574 344 440 547 138 546 138 546 490 468 468 560 558 558 558 558 558 457 558 558 558 558 558 558 558 558 558 558 558 558 187 558 558 558 558 558 558 558 433 407 558 558 558 558
Bridge- and Tunnel Formwork
Base MP 50 Base Plate for RS, compl. Base Plate for RS, compl. Base Plate for RS, compl. Base Plate HD Base Plate QUATTRO QB Base Plate UJP Base Plate UJP Base Plate-2 for RS 1000, galv. Base Plate-2 for RS 1000, galv. Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Spindle TRH Base Spindle TRH Base Standard UVB 24 Base Standard UVB 24 Base-Head Frame ST 100, galv. Beam Connector, galv. Beam Waler UZR 190/150 Bearing Box BR Bit Holder for DSSE 642 Bit Holder for SCU 7-9 Bit Holder for SCU 7-9 Bit Point TX 30 Bit Point TX 30 Board Retainer UPD 60 Board Transom UHL 104 Board Transom UHL 72 Bolt EN 14399-4 M12 x 140-10.9 Bolt ISO 4014 M10 x 100-8.8, galv. Bolt ISO 4014 M10 x 50-8.8, galv. Bolt ISO 4014 M10 x 80-8.8, galv. Bolt ISO 4014 M12 x 100-8.8, galv. Bolt ISO 4014 M12 x 60-8.8, galv. Bolt ISO 4014 M12 x 70-8.8, galv. Bolt ISO 4014 M12 x 70-8.8, galv. Bolt ISO 4014 M12 x 80-8.8, galv. Bolt ISO 4014 M16 x 100-8.8, galv. Bolt ISO 4014 M16 x 110-8.8, galv. Bolt ISO 4014 M16 x 120-8.8, galv. Bolt ISO 4014 M16 x 130-8.8, galv. Bolt ISO 4014 M16 x 140-8.8, galv. Bolt ISO 4014 M16 x 160-8.8, galv. Bolt ISO 4014 M16 x 60-8.8, galv. Bolt ISO 4014 M16 x 70-8.8, galv. Bolt ISO 4014 M16 x 80-8.8, galv. Bolt ISO 4014 M16 x 90-8.8, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M20 x 120-8.8, galv. Bolt ISO 4014 M20 x 130-8.8, galv. Bolt ISO 4014 M20 x 160-8.8, galv. Bolt ISO 4014 M20 x 200-8.8, galv. Bolt ISO 4014 M20 x 80-8.8, galv. Bolt ISO 4014 M20 x 90-8.8, galv. Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 130-8.8, galv. Bolt ISO 4014 M24 x 200-8.8, galv. Bolt ISO 4014 M24 x 220-10.9, galv.
Plywood, SystemIndependent Accessories
027310 028100 028100 028100 022024 037550 100244 100244 102018 102018 106000 106000 106000 106000 106000 106000 106000 106000 106126 106126 100014 100014 019900 018310 028790 108162 024921 072220 072220 072140 072140 101596 101591 101588 061230 710242 721817 710593 750330 710221 720610 720610 710220 710219 710233 105402 710232 722169 780155 710299 714093 710222 721729 024910 024910 104477 711078 781054 706462 024900 710226 029560 029560 029560 109612 113686 106797
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 715585 113247 113247 111567 111567 113255 113255 112919 027790 027940 027940 066082 066082 022016 022016 034550 034550 108213 037530 037530 037530 023660 023660 023660 023660 037190 037190 106663 106662 030060 027500 027510 025700 025690 025710 025720 106661 107546 054511 054512 054510 114997 114997 054528 054529 105845 100401 034570 052621 013240 034540 115640 023640 023640 070030 065023 065024 065022
Bolt Ø 25 x 240, SKS, galv. Bolt Ø 25 x 260, mont. Bolt Ø 25 x 260, mont. Bolt Ø 26 x 120 Bolt Ø 26 x 120 Bolts SB-MAXIMO, galv. Bolts SB-MAXIMO, galv. Bottom Frame SRU/UZ Brace Clamp HL, galv. Brace Clamp, galv. Brace Clamp, galv. Brace Connector DRA Brace Connector DRA Brace Connector HDR Brace Connector HDR Brace Connector HSRA Brace Connector HSRA Brace Connector MPB 24 Brace Connector QR Brace Connector QR Brace Connector QR Brace Connector TRIO, galv. Brace Connector TRIO, galv. Brace Connector TRIO, galv. Brace Connector TRIO, galv. Brace Connector-3 RAPID, galv. Brace Connector-3 RAPID, galv. Brace Frame Adaptor SB 2 Brace Frame Adaptor SB A0, A, B Brace Frame Double Anchor DW 15 Brace Frame SB 1 Brace Frame SB 2 Brace Frame SB-A Brace Frame SB-A0 Brace Frame SB-B Brace Frame SB-C Brace Frame Wall Scaffold Hinge Brace TRP 150-210, compl. Brace TRP 240-300, compl. Brace TRP 300-360, compl. Brace TRP 77-114, compl. Bracing Shoe RCS DW 15 Bracing Shoe RCS DW 15 Bracing TRP 120 Bracing TRP 240 Bracket ASG 70-100 Bracket Brace UCP 72/104 Bracket HSK 60 Brasil Coated Ply 21 mm 2500 x 1250 mm Bulkhead Tie Bulkhead Tie HST, galv. Bulkhead Tie MX DW20 Bulkhead Tie TS, galv. Bulkhead Tie TS, galv. Bulldog-Spike Ø 48/12 mm Butt Strap 102/30 mm Butt Strap 170/30 mm Butt Strap 54/30 mm
568 569 568 499 567 32 182 333 324 323 362 106 207 208 388 122 207 356 207 256 277 29 63 207 266 207 246 197 196 189 183 184 180 180 181 181 196 71 71 71 71 216 502 71 71 414 472 123 522 142 120 29 28 62 576 531 531 531
105905 030130 030130 051020 101858 101860 108870 101854
Cable 2-Strands Ø = 10 mm, l = 4.0m Cam Nut DW 15, galv. Cam Nut DW 15, galv. Carriage CB 240 Castor UEW 12 with Spigot Castor UEW 12 with Spindle Cavity Wall Bracket ASG Central cross 170
174 214 120 422 488 489 416 337
602
102251 105328 022025 022013 054240 054240 111975 037600 037610 105448 037590 037210 031200 031200 031200 052624 052622 045211 045010 045011 045012 045013 045020 045021 045022 045023 045030 045031 045032 045033 045040 045041 045042 045043 045050 045051 045052 045053 045060 045061 045062 045063 045210 110556 030790 112815 115145 028660 028670 028890 071200 051100 051000 031220 030940 111382 109743 111833 113744 111390 114166 109469 109470 109471 109472 109610 105907
Central cross 200 Centrepivot VHM Ø 60 mm Centring Bar 40 x 20 x 400 mm Centring Bolt HD M12, galv. Chamfer Strip 15/15 l = 2.70 m Chamfer Strip 15/15 l = 2.70 m Chamfer Strip LICO I = 3.00 m Chamfer Strip QDL 125 Chamfer Strip QDL 275 Chamfer Strip QDL 350 Chamfer Strip QDL 50 Chamfer Strip RAPID l = 3,0 m Chamfer Strip with Flange l = 2.50 m Chamfer Strip with Flange l = 2.50 m Chamfer Strip with Flange l = 2.50 m Chinese Coated Ply 21 mm 500 x 2500 mm Chinese Coated Ply 21 mm 1250 x 2500 mm Circular Column Landing 25-70 Circular Column Panel Ø 25 cm h = 0.3 m Circular Column Panel Ø 25 cm h = 1.2 m Circular Column Panel Ø 25 cm h = 2.4 m Circular Column Panel Ø 25 cm h = 3.0 m Circular Column Panel Ø 30 cm h = 0.3 m Circular Column Panel Ø 30 cm h = 1.2 m Circular Column Panel Ø 30 cm h = 2.4 m Circular Column Panel Ø 30 cm h = 3.0 m Circular Column Panel Ø 35 cm h = 0.3 m Circular Column Panel Ø 35 cm h = 1.2 m Circular Column Panel Ø 35 cm h = 2.4 m Circular Column Panel Ø 35 cm h = 3.0 m Circular Column Panel Ø 40 cm h = 0.3 m Circular Column Panel Ø 40 cm h = 1.2 m Circular Column Panel Ø 40 cm h = 2.4 m Circular Column Panel Ø 40 cm h = 3.0 m Circular Column Panel Ø 45 cm h = 0.3 m Circular Column Panel Ø 45 cm h = 1.2 m Circular Column Panel Ø 45 cm h = 2.4 m Circular Column Panel Ø 45 cm h = 3.0 m Circular Column Panel Ø 50 cm h = 0.3 m Circular Column Panel Ø 50 cm h = 1.2 m Circular Column Panel Ø 50 cm h = 2.4 m Circular Column Panel Ø 50 cm h = 3.0 m Circular Column Platform 25-70, compl. Clamp GFK Clamp Lock Clamping Plate M16 Nova Grip Clamping Plate M16 Nova Grip Clawhead 16/20 S, galv. Clawhead 16/20, galv. Clawhead 24 S, galv. Cleaning Plywood and Frame DOMINO Climbing Bracket CB 160 Climbing Bracket CB 240 Climbing Cone-2 M 24/DW 15, galv. Climbing Cone-2 M 36/DW 26, galv. Climbing Rail Angle Connector RCS Climbing Rail Connector RCS 33 Climbing Rail Connector RCS 40 Climbing Rail Connector RCS 79 Climbing Rail Connector RCS 97 Climbing Rail RCS 148 Climbing Rail RCS 248 Climbing Rail RCS 348 Climbing Rail RCS 498 Climbing Rail RCS 748 Climbing Rail RCS 998 Clip for Console Bracket ASG 70-100
337 549 392 388 266 574 277 255 255 255 255 245 143 283 573 522 522 293 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 292 293 314 575 562 562 322 322 322 590 423 422 434 197 496 495 495 496 496 495 495 495 495 495 495 418
603
Formwork Girders Wall Formwork Column Formwork Slab Formwork
471 471 470 471 59 60 140 140 140 402 70 317 70 584 584 584 584 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 238 176 147 286 176 147 286 153 61 60 60 142 208 256 323 355 353 405 500 569 167 500 569 569 569 214 192 220 221 497 497 483 483 483 483
Shoring Systems
Console Bracket UCB 104 Console Bracket UCB 32 Console Bracket UCB 36 Console Bracket UCB 72 Corner Alu TAE 270/2 Corner Alu TAE 90/2 Corner Coupling EKZ 76/76 Corner Coupling EKZ 95/43 Corner Coupling EKZ Spec. Length Corner Frame FBE Corner Handrail TRP Corner Platform GCP, complete Corner Platform TRP Corner Profile TAE 90 Corner Profile TE 120 Corner Profile TE 60 Corner Profile TE/TAE 270 Corner Reveal WD 20, 42.7 cm Corner Reveal WD 20, 49.0 cm Corner Reveal WD 20, 70.5 cm Corner Reveal WD 20, 193.5 cm Corner Reveal WD 24, 193.5 cm Corner Reveal WD 24, 49.0 cm Corner Reveal WD 24, 70.5 cm Corner Reveal WD 24, 42.7 cm Corner Reveal WD 25, 193.5 cm Corner Reveal WD 25, 42.7 cm Corner Reveal WD 25, 49.0 cm Corner Reveal WD 25, 70.5 cm Corner Reveal WD 30, 193.5 cm Corner Reveal WD 30, 42.7 cm Corner Reveal WD 30, 49.0 cm Corner Reveal WD 30, 70.5 cm Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, right Corner Spindle RKR Corner TRIO Structure TSE 120 Corner TRIO Structure TSE 270 Corner TRIO Structure TSE/4 330 Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 5/1, galv. Cotter Pin 5/1, galv. Cotter Pin 5/1, galv. Cotter Pin 7, galv. Cotter Pin 8, galv. Counterplate DW 15, 120 x 120 x 15 Counterplate DW 20, 120 x 120 x 20 Counterplate DW 20, 120 x 120 x 20 Counterplate DW 26, 120 x 120 x 20 Counterplate RCS DW 20 Counterplate RCS DW 26 Coupler Brace UBC 150/200 Coupler Brace UBC 200/200 Coupler Brace UBC 250/200 Coupler Brace UBC 300/200
Climbing Systems
100149 100235 100711 100224 023891 023971 013130 013140 013180 026626 107021 111379 107009 700844 700845 700846 700843 065100 065101 065102 065103 065109 065107 065108 065106 065115 065112 065113 065114 065121 065118 065119 065120 027070 027070 027070 027060 027060 027060 022410 022661 022581 054375 018060 018060 018060 018060 018060 018060 018060 018060 018060 022230 022230 022230 710304 710618 030140 030830 030830 030420 114082 114084 100416 100419 100422 100425
Scaffolding, Stairs, Working Platforms
120 244 244 244 276 276 276 264 264 264 265 282 282 302 105 120 61 499 187 499 353 389 389 401 233 552 218 247 268 257 278 278 278 31 66 246 268 257 218 407 417 442 514 515 218 35 90 232 552 523 473 150 205 389 353 352 185 106 64 32 182 107 64 32 333 369 425
Bridge- and Tunnel Formwork
Clip HSC, galv. Column Frame 210, Alu Column Frame 300, Alu Column Frame 60, Alu Column Panel LICO 700 x 1000 Column Panel LICO 700 x 3000 Column Panel LICO 700 x 500 Column Panel TRS 120 x 90 Column Panel TRS 270 x 90 Column Panel TRS 60 x 90 Column Tie Bolt TRIO, galv. Column Waler SSRZ-U120, spec. length Column Waler SSRZ-U140, spec. length Combihead SCK Compensation Waler DAR Compensation Waler HSR 59 Compensation Waler TAR 85 Compensation Washer 16, yellow galv Compensation Washer 20, galv. Compensation Washer 20, galv. Compression Brace Head MP/SRU Compression Brace Spindle HD Compression Head HD Compression Strut FB-2 Concrete Cone Gauge Concrete Cone Gauge Concrete Spacer Tube FZR 22 l = 0.90 m Concreting Landing Concreting Landing Concreting Landing Concreting Platform LICO Concreting Platform LICO, Cover Concreting Platform LICO, Frame Concreting Platform TRIO 120 x 270 Concreting Platform TRIO 120 x 270 Concreting Platform, compl. Concreting Platform, compl. Concreting Platform, compl. Cone DR 22 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone FRC for Anchor Sleeve Cone FZR 22 Cone MX DR 22 Cone Spanner TRH Cone Spanner TRH Cone Spanner TRH Conifer Plywood 20 mm 2500 x 1250 mm Connection Protect Panel UPC Connector for Platform VARIO Connector Kicker/Push-Pull Prop, galv. Connector Kicker/Push-Pull Prop, galv. Connector MP-SRU Connector MPV-2 Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SRU/UZ Connector ST 100, galv. Connector TRIO-CB
Plywood, SystemIndependent Accessories
034500 037260 037250 037270 111957 111683 111964 054210 054200 054220 054230 012040 012090 061180 066084 034510 023550 024000 024180 024180 107161 022023 022022 026627 101995 101995 031260 037410 037410 037410 115894 115896 115895 022950 022950 037400 037400 037400 065033 026240 026240 026240 026240 116233 031390 113018 110634 110634 110634 052800 100583 100541 028080 028080 107160 027301 027680 027680 027680 027680 025740 025740 025740 025740 112920 019810 051090
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 100428 100581 100580 024220 107348 030400 022020 013010 061026 061038 061024 061027 021980 021980 021990 021990 723910 105401 051010 111238 037440 037440 037440 034520 037320 070760 070760 065068 065068 065016 065016 019950 019950 018300 018300 010180 010270 010190 028680 027890 106989 065130 026417 026417 026417 026417 026417 026417 026417 030050 030050 030050 030050 030050 030050 030050 030050 030800 030800 030800 030500 030500 030500 031320
Coupler Brace UBC 72-104/200 Coupler Transom UHC 104 Coupler Transom UHC 72 Coupling Compression Plate KDP Coupling MPB 24 Coupling Nut M 30/DW 26, galv. Coupling Section HD30 Coupling VKZ 99 Cover Strip SAL 150 Cover Strip SAL 37.5 Cover Strip SAL 50 Cover Strip SAL 75 Crane Eye 24, left Crane Eye 24, left Crane Eye 24, right Crane Eye 24, right Crane Eye A18 Crane Eye BR 2,5 t Crane Eye CB 240 Crane Hook 2 t / GT 24 Crane Hook Concreting Platform Crane Hook Concreting Platform Crane Hook Concreting Platform Crane Hook HSKA Crane Lifting Unit-2 RAPID Crane Splice GT 24 Crane Splice GT 24 Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, painted Crate Pallet 80 x 120, painted Cross Forkhead TR 38-70/50 Cross Forkhead TR 38-70/50 Cross Strap, galv. Cross Strap, galv. Cross Waler KRZ U-100 Spec. Length Cross Waler KRZ U-120 Spec. Length Cross Waler KRZ U-140, Spec. Length Crosshead 20/24 S, galv. Crosshead 20/24, galv. Crosshead PEP 10 / VT 20, galv. Cutting Cost ASP Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 20/B 20 Cutting Cost Tie Rod DW 20/B 20 Cutting Cost Tie Rod DW 20/B 20 Cutting Cost Tie Rod DW 26 Cutting Cost Tie Rod DW 26 Cutting Cost Tie Rod DW 26 Cutting Cost Tube FZR 22
483 474 474 143 354 193 386 139 301 301 301 301 146 163 163 146 174 439 423 146 248 269 258 124 246 146 162 485 536 485 536 375 367 368 376 134 134 134 322 322 362 240 188 176 370 394 430 480 576 212 188 212 434 441 405 434 527 190 219 219 193 221 198 218
101349 101350 102605 101394 101378 101379 101381 101360 101372 101373 101375 101576 100039 100076 100079 100082 100085 100031 072240 024923 071290 071350 071362 019940 021630 031641 031642 031643 031643 031635 031636 031637 031638 031655 031655 031644 031644 027520 022011 017030 017030 018280 018280 018280 022380 022440 727112 727112 727112 727112 031040 031040 031040 031080 031080 031080 031030 031030 031030 031100 031120 102390 061210 065017
Debris Net 3,0 x 10,0 m Debris Net 3,0 x 20,0 m Deck Link Plate UED Decking Gap Filler UD 11/150 Decking Gap Filler UD 11/200 Decking Gap Filler UD 11/250 Decking Gap Filler UD 11/300 Decking Gap Filler UD 7/150 Decking Gap Filler UD 7/200 Decking Gap Filler UD 7/250 Decking Gap Filler UD 7/300 Decking Transom Spigot UES Decking Transom UHD 104 Decking Transom UHD 150 Decking Transom UHD 200 Decking Transom UHD 250 Decking Transom UHD 300 Decking Transom UHD 72 Depth Chuck for SCU 7-9 Depth Chuck for DSSE 642 Design Calculation Design Work and Technical Advice Design Work incl. Cycle Plans, Parts List Diagonal Strut ST 100, galv. Distribution Waler DK Concrete Cone Architec. DW 15, 58/52 DK Concrete Cone DW 15 58/30 DK Concrete Cone UNI DW 15 58/52 DK Concrete Cone UNI DW 15 58/52 DK Cone DW 15/35 DK Cone DW 15/55 DK Cone DW 20/55 DK Cone DW 26/55 DK Cone Remover UNI DK Cone Remover UNI DK Tongs for Concrete Cone 58 DK Tongs for Concrete Cone 58 Double Anchor Tie Yoke DSW Double Anchor Tie Yoke HDD Double Coupler NK 60/48, galv. Double Coupler NK 60/48, galv. Double Head Nail l = 65 mm Double Head Nail l = 65 mm Double Head Nail l = 65 mm Double Spindle with Wheel RKR Double Spindle without Wheel RKR Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit Ø 20 mm Drill Bit Ø 20 mm Drill Bit Ø 20 mm Drill Bit Ø 25 mm Drill Bit Ø 25 mm Drill Bit Ø 25 mm Drill Bit Ø 35 mm Drill Bit Ø 35 mm Drill Bit Ø 35 mm Drill Bit Ø 40 mm Drill Bit Ø 50 mm Drill- and Pretension Device 45° Drophead SFK Drying Locker Klima TS 2000
486 486 467 468 468 468 468 468 468 468 468 475 463 463 463 463 463 463 546 547 598 598 598 366 162 227 227 227 230 226 226 226 226 232 551 232 552 189 392 481 577 240 325 564 152 152 555 583 595 590 554 583 590 554 583 590 554 583 590 554 554 223 302 530
101347 101348
Debris Net 2,5 x 10,0 m Debris Net 2,5 x 20,0 m
486 486
061045 061046
Edge Beam SRT-2 150 Edge Beam SRT-2 75
301 301
604
605
Formwork Girders
432 565 136 432 565 432 565 565 565 565 565 565 419 565 565 136 565 565 513 565 432 117 117 114 114 120 120 312 312 312 115 113 118 116 114 119 54 49 44 55 50 44 101 97 117 114 119 55 50 44
Wall Formwork
F.H. Bolt DIN 603 M6 x 180 MU, galv. F.H. Bolt DIN 603 M6 x 180 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN 603 M8 x 140 MU, galv. F.H. Bolt DIN 603 M8 x 160 MU, galv. F.H. Bolt DIN 603 M8 x 200 MU, galv. F.H. Bolt DIN 603 M8 x 250 MU, galv. F.H. Bolt DIN 603 M8 x 45 MU, galv. F.H. Bolt DIN 603 M8 x 60 MU, galv. F.H. Bolt DIN 603 M8 x 60 MU, galv. F.H. Bolt DIN 603 M8 x 65 MU, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. F.H. Bolt DIN 603 M8 x 80 MU, galv. F.H. Bolt DIN 603 M8 x 90 MU, galv. F.H. Bolt DIN 603 M8 x 90 MU, galv. F.H. Bolt DIN603 M8 x 180 MU, galv. Filler Bar Steel HSAS 120 x 5 Filler Bar Steel HSAS 120 x 6 Filler Bar Steel HSAS 150 x 5 Filler Bar Steel HSAS 150 x 6 Filler Bar Steel HSAS 90 x 5 Filler Bar Steel HSAS 90 x 6 Filler Element Cross GFC 200 x 100 Filler Element Longitudinal GFL 150 x 100 Filler Element Longitudinal GFL 183 x 20 Filler Panel HSAP 120 x 15 Filler Panel HSAP 150 x 15 Filler Panel HSAP 90 x 15 Filler Plate HSLA 120 Filler Plate HSLA 150 Filler Plate HSLA 90 Filler Plate LA 120 x 36 Filler Plate LA 270 x 36 Filler Plate LA/4 330 x 36 Filler Profile TPP 120, Alu Filler Profile TPP 270, Alu Filler Profile TPP 330, Alu Filler Support DPA 125 Filler Support DPA 250 Filler Support HSP 120 Filler Support HSP 150 Filler Support HSP 90 Filler Support TPA 120 Filler Support TPA 270 Filler Support TPA 330
Column Formwork
051650 051650 710240 710240 710240 024360 024360 725462 024380 024390 024410 710295 710326 710326 710709 024140 024140 723439 750076 750076 108834 034370 034470 034320 034480 034330 034460 110040 110486 110646 034280 034130 034140 034290 034170 034180 023270 023170 054384 101823 101813 101829 066053 066033 034390 034400 034410 023450 023460 054430
Slab Formwork
72 294 139 546 338 315 541 145 162 135 494 88 333 149 216 502
Shoring Systems
Erection Device TRP 200, 10 kN Exit Handrail Post SRS 134 Extension 1/2" l = 250 mm Extension 1/2" l = 250 mm Extension 60 for Striking Trolley Extension GF 10 Extension GF 10 Extension Splice 24-2 Extension Splice 24-2 Extension VARIO 24 U120 Extension VARIO 24 U120 Extension Waler TRH 165 External Bracket SRU/UZ External Corner Platform VARIO Eye Nut RCS DW 15 Eye Nut RCS DW 15
Climbing Systems
054517 103417 072160 072160 104050 111392 111392 024480 024480 104027 104027 108995 112918 103992 115378 115378
Scaffolding, Stairs, Working Platforms
449 449 584 584 584 584 584 584 138 546 20 20 21 21 20 20 15 15 16 16 16 15 27 10 10 10 12 11 11 11 23 24 24 24 24 25 26 26 25 369 402 432 529 73 470 470 451 451 451 470 470 470 248 294 270 259 287 393 133 149 449 449 304 369 305 325 553
Bridge- and Tunnel Formwork
Edge Profile UH 100 Edge Profile UH 125 EFD Paint orange, 5 L EFD Paint red, 1 L EFD Paint white, 1 L EFD Paint white, 5 L EFD Paint yellow, 1 L EFD Paint yellow, 5 L Electric Power Wrench M 14, ASB 636 Electric Power Wrench M 14, ASB 636 Element MX 120 x 120 Element MX 120 x 240 Element MX 120 x 30 Element MX 120 x 45 Element MX 120 x 60 Element MX 120 x 90 Element MX 270 x 120 Element MX 270 x 240 Element MX 270 x 30 Element MX 270 x 45 Element MX 270 x 60 Element MX 270 x 90 Element MX 30 x 240 Element MX 330 x 120 Element MX 330 x 240 Element MX 330 x 270 Element MX 330 x 30 Element MX 330 x 45 Element MX 330 x 60 Element MX 330 x 90 Element MX 90 x 240 Element MX 90 x 30 Element MX 90 x 45 Element MX 90 x 60 Element MX 90 x 90 Elements MX 60 x 240 Elements MX 60 x 30 Elements MX 60 x 45 Elements MX 60 x 60 End Frame ST 100, galv. End Guardrail Frame 55 End Guardrail Frame 55 End Guardrail Frame 55 End Guardrail Frame TRP End Guardrail in Advance UPA 104 End Guardrail in Advance UPA 72 End Guardrail Post UZE 150 End Guardrail Post UZE 200 End Guardrail Post UZE 250 End Guardrail UPX 104 End Guardrail UPX 32 End Guardrail UPX 72 End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Plate SRZ End Platform VARIO End Step UAE 100 End Step UAE 125 End Support SSL End Waler ST 100, galv. Erection Aid SSH, Alu Erection Bar GT/VT, galv. Erection Bar GT/VT, galv.
Plywood, SystemIndependent Accessories
114349 114621 727057 727056 727060 727061 727058 727059 072150 072150 112143 112104 112239 112232 112221 112152 112022 112006 112090 112078 112200 112045 112133 114248 114426 116454 114457 114452 114445 114258 112115 112271 112265 112259 112252 112126 112292 112286 112280 019930 065066 065066 065066 054519 101799 104618 108536 107178 108544 100349 101579 100444 103724 103724 103724 103724 103724 103724 710001 103932 109208 114180 061023 019920 061300 070740 070740
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 061049 061036 052150 052159 740458 740526 740461 740525 740524 740523 740460 740459 740454 740522 740457 740499 740498 740497 740456 740455 740462 740531 740465 740529 740528 740527 740464 740463 740468 740467 740469 052240 103321 103323 745645 745319 745569 745570 745322 745323 745560 745560 745324 745324 745580 745321 103333 745347 745346 103274 103275 103311 740275 740324 745305 740279 740278 740277 740276 740276 740251 740323 745303 745300 740256 740287 740285 606
Filler Timber SPH 150 Filler Timber SPH 225 Fin-Ply 12 mm 1500 x 3000 mm Fin-Ply 15 mm 1500 x 3000 mm Fin-Ply 15 mm D 125 x 100 Fin-Ply 15 mm D 125 x 20 Fin-Ply 15 mm D 125 x 25 Fin-Ply 15 mm D 125 x 30 Fin-Ply 15 mm D 125 x 35 Fin-Ply 15 mm D 125 x 40 Fin-Ply 15 mm D 125 x 50 Fin-Ply 15 mm D 125 x 75 Fin-Ply 15 mm D 250 x 100 Fin-Ply 15 mm D 250 x 20 Fin-Ply 15 mm D 250 x 25 Fin-Ply 15 mm D 250 x 30 Fin-Ply 15 mm D 250 x 35 Fin-Ply 15 mm D 250 x 40 Fin-Ply 15 mm D 250 x 50 Fin-Ply 15 mm D 250 x 75 Fin-Ply 15 mm D 75 x 100 Fin-Ply 15 mm D 75 x 20 Fin-Ply 15 mm D 75 x 25 Fin-Ply 15 mm D 75 x 30 Fin-Ply 15 mm D 75 x 35 Fin-Ply 15 mm D 75 x 40 Fin-Ply 15 mm D 75 x 50 Fin-Ply 15 mm D 75 x 75 Fin-Ply 15 mm DM 125 x 75 Fin-Ply 15 mm DM 250 x 75 Fin-Ply 15 mm DM 75 x 75 Fin-Ply 18 mm 1500 x 3000 mm Fin-Ply 18 mm TAE 120/135°, left Fin-Ply 18 mm TAE 120/135°, right Fin-Ply 18 mm TAE 90 Fin-Ply 18 mm TAE 90/2 Fin-Ply 18 mm TE 120, left Fin-Ply 18 mm TE 120, right Fin-Ply 18 mm TE 120/2, left Fin-Ply 18 mm TE 120/2, right Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TE 60 Fin-Ply 18 mm TE 60/2 Fin-Ply 18 mm TE 270/135° Fin-Ply 18 mm TE/4 330, left Fin-Ply 18 mm TE/4 330, right Fin-Ply 18 mm TEI 120/135°, left Fin-Ply 18 mm TEI 120/135°, right Fin-Ply 18 mm TEI 270/135° Fin-Ply 18 mm TR 120 x 120 Fin-Ply 18 mm TR 120 x 24 Fin-Ply 18 mm TR 120 x 240 Fin-Ply 18 mm TR 120 x 30 Fin-Ply 18 mm TR 120 x 60 Fin-Ply 18 mm TR 120 x 72 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 270 x 120 Fin-Ply 18 mm TR 270 x 24 Fin-Ply 18 mm TR 270 x 240 Fin-Ply 18 mm TR 270 x 240, 2 Sheets Fin-Ply 18 mm TR 270 x 72 Fin-Ply 18 mm TR 60 x 30 Fin-Ply 18 mm TR 60 x 72
303 303 520 520 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 520 585 585 586 586 585 585 585 585 585 586 585 586 585 585 585 586 586 585 585 585 585 585 585 585 585 585 586 585 585 585 585 585 585 585 585
740284 740284 740286 740257 740257 740252 740252 740255 740255 745341 740322 745340 745345 745344 745343 745342 740770 740273 740280 740280 740270 740270 740271 740271 745329 745348 745349 740309 740308 740310 052260 052060 052270 052460 052095 052810 052816 052090 052815 052818 052130 052829 052823 051230 026631 026625 052828 024630 710340 020330 026652 026649 026648 031090 065062 030260 030260 101706 101706 071340 071340 023800 066090 034680 023010 028340 028380
Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR, THP 60 x 60 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR/4 330 x 120 Fin-Ply 18 mm TR/4 330 x 24 Fin-Ply 18 mm TR/4 330 x 240, 2 Sheets Fin-Ply 18 mm TR/4 330 x 30 Fin-Ply 18 mm TR/4 330 x 60 Fin-Ply 18 mm TR/4 330 x 72 Fin-Ply 18 mm TR/4 330 x 90 Fin-Ply 18 mm TRA 90 x 30 Fin-Ply 18 mm TRM 120 x 72 l = 286 mm Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM, TAM 270 x 72 Fin-Ply 18 mm TRM, TAM 270 x 72 Fin-Ply 18 mm TRM, TAM 270/330 Fin-Ply 18 mm TRM, TAM 270/330 Fin-Ply 18 mm TRM, TRM/4 330 l = 998 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 383 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 531 mm Fin-Ply 18 mm TRS 120 x 90 Fin-Ply 18 mm TRS 270 x 90 Fin-Ply 18 mm TRS 60 x 90 Fin-Ply 21 mm 1250 x 2500 mm Fin-Ply 21 mm 1500 x 2500 mm Fin-Ply 21 mm 1500 x 3000 mm Fin-Ply 30 mm 1250 x 3610 mm Fin-Ply 9 mm 1500 x 3000 mm Fin-Ply 9 mm SDP 150 x 37,5 Fin-Ply 9 mm SDP 150 x 50 Fin-Ply 9 mm SDP 150 x 75 Fin-Ply 9 mm SDP 75 x 37,5 Fin-Ply 9 mm SDP 75 x 50 Fin-Ply 9 mm SDP 75 x 75 Fin-Ply Maxi 20 mm 5400 x 2000 mm Fin-Ply Maxi 20 mm 7500 x 2700 mm Finishing Platform Beam CB Finishing Platform Bracket FBN-2 Finishing Platform FBN-2/300 FinNa-Ply 21 mm 2500 x 1250 mm Fix Strap U100-120, galv. Flanged Nut M14 - SW 19, yellow Folding Bearing Plate 25 Folding Bracket FB 180-3, compl. Folding Corner Platform FEB 180-3/300 Folding Platform FB 180-3/300 Form Lining Drill Bit Ø 20 x 1000 mm Formwork Bracket-2 Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/40 l = 3.00 m Formwork Joint 21/40 l = 3.00 m Formwork Repair i.e. Weldings Formwork Repair i.e. Weldings Foundation Strap TRIO Foundation Tie Clamp DOMINO DLS Foundation Tie Clamp HANDSET HLS Foundation Tie Clamp TRIO Frame MRK 120 Frame MRK 137,5
586 585 585 585 586 586 585 586 585 586 586 586 586 586 586 586 586 585 585 586 585 586 585 586 586 586 586 585 585 585 520 520 520 520 520 595 595 595 595 595 595 520 520 427 401 400 523 136 486 440 400 399 398 554 526 143 574 143 574 583 594 67 107 123 66 348 348
607
Formwork Girders Wall Formwork Column Formwork Slab Formwork
453 454 454 453 453 136 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320
2 320 2 320 2 320 2 320 2 320 144 206 284 144 206 284 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 512 506 506 515 509 512 506 506 513 513 507 507 507 508 508 508 512 516 508 508 513 509 510 511 232 232 231 439 168
Shoring Systems
Gap Filler UZD 150 x 16 Gap Filler UZD 150 x 31 Gap Filler UZD 150 x 37 Gap Filler UZD 200 x 16 Gap Filler UZD 250 x 16 Girder Claw HB U100-U120, galv. Girder GT 24 l = 0.90 m Girder GT 24 l = 0.90 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.80 m Girder GT 24 l = 1.80 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.70 m Girder GT 24 l = 2.70 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.90 m Girder GT 24 l = 3.90 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.50 m
Girder GT 24 l = 4.80 m Girder GT 24 l = 4.80 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.70 m Girder GT 24 l = 5.70 m Girder GT 24 l = 6.00 m Girder GT 24 l = 6.00 m Girder Headpiece GT 24, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24/A, galv. Girder Headpiece GT 24/A, galv. Girder Headpiece GT 24/A, galv. Girder VT 20K l = 1.45 m Girder VT 20K l = 1.45 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.90 m Girder VT 20K l = 2.90 m Girder VT 20K l = 3,90 m Girder VT 20K l = 3,90 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.60 m Girder VT 20K l = 3.60 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.90 m Girder VT 20K l = 4.90 m Girder VT 20K l = 5.90 m Girder VT 20K l = 5.90 m GKB Abutment Bracket 180 GKB Abutment Platform 180 x 120 GKB Abutment Platform 180 x 240 GKB Anchor Bolt M 24 x 200/10° GKB Board Formwork 140 x 120 GKB Cantilever Parapet Bracket 180 GKB Cantilever Parapet Platform 180 x 120 GKB Cantilever Parapet Platform 180 x 240 GKB Handrail Post 115° GKB Handrail Post 90°/160 GKB Protection Board 120 GKB Protection Board 240 GKB Protection Board 90/120 GKB Side Formwork 60 x 120 GKB Side Formwork 60 x 245 GKB Side Formwork Beam GKB Side Formwork Bracket GKB Socket M24/15-35 GKB Soffit Formwork 45 x 120 GKB Soffit Formwork 45 x 245 GKB Soffit Formwork Beam GKB Spindle for Cantilever Slab Formwork GKB Work Cage GKB Work cage protection panel Glue Component A-2 Glue Component B-2 Glue for Concrete Cones-2 / 5kg Set Gravity Pivot Plate BR GRV Bearing Block, left
Climbing Systems
107981 107986 107977 108010 108011 024600 075100 075100 075120 075120 075150 075150 075180 075180 075210 075210 075240 075240 075270 075270 075300 075300 075330 075330 075360 075360 075390 075390 075420 075420 075450 075450
075480 075480 075510 075510 075540 075540 075570 075570 075600 075600 028050 028050 028050 028070 028070 028070 074990 074990 074905 074905 074910 074910 074890 074890 074920 074920 074950 074950 074930 074930 074940 074940 074960 074960 074970 074970 074980 074980 102217 102220 102219 102394 102195 102327 102185 102184 102396 102395 102187 102186 102188 102778 102779 102329 102822 102317 102193 102190 102328 102196 102197 104181 108958 110345 108136 020600 021270
Scaffolding, Stairs, Working Platforms
348 349 349 349 349 349 349 349 348 348 348 483 542 483 542 256 325 574 240 240 240 172 175 172 175 177 177 173 173 177 177 173 173 175
Bridge- and Tunnel Formwork
Frame MRK 150 Frame MRK 180 Frame MRK 201,5 Frame MRK 225 Frame MRK 230 Frame MRK 237 Frame MRK 266 Frame MRK 296 Frame MRK 62,5 Frame MRK 75 Frame MRK 90 Frame Pallet USP 72, galv. Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. Frame Pallet USP 104, galv. Frame Spanner QUATTRO QA Framing Clip, galv. Framing Clip, galv. Framing Member ASP, l = 2.50 m Framing Member ASP, l = 3.00 m Framing Member ASP, l = 3.50 m FTF 500 Bracket FTF Assembly Device FTF Bracket w. Spindle FTF Clamp FTF End Guardrail, compl. FTF Platform 180 x 60 FTF Spindle Guide FTF Spindle Guide w. Spindle FTF Tie plate DW 15, compl. FTF Tie unit 65, compl. FTF Waling Coupling w. RS-Adaptor FTF Waling Coupling w/o RS-Adaptor FTF Wrench SW 38/1500
Plywood, SystemIndependent Accessories
028350 113799 028460 028360 028470 028480 028490 028370 028390 028400 028330 100660 100660 100678 100678 037540 018290 018290 065124 065125 065126 103981 104195 103949 104744 104018 103946 103945 104070 103942 104017 103944 104083 104803
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 021280 021290 051160 108387 108218 104412 026635 108214 103865 109010 110326 035700 035700 035700 101290 061250 104131 104131 037430 037430 037430 037430 037420 037420 037420 026628 114299 106877 101592 101592 034580 034580 034580 034580 034580 034580 034580 114328 108053 061260 061260 061260 054475 106147 106148 100265 100266 100267 100268 100810 025750
GRV Bearing Block, right GRV Spindle Connector Guardrail Connector CB Guardrail Connector, Corner Guardrail Connector, Straight Guardrail Coupler UPW Guardrail Extension FB Guardrail Filler Guardrail for End Platform VARIO Guardrail Frame RGP 120 Guardrail GF 100 Guardrail Holder Guardrail Holder Guardrail Holder Guardrail Holder GT24/VT20 Guardrail Holder SGH, Alu Guardrail Holder SRU/SRZ Guardrail Holder SRU/SRZ Guardrail Landing 134, galv. Guardrail Landing 134, galv. Guardrail Landing 134, galv. Guardrail Landing 134, galv. Guardrail Landing 52, galv. Guardrail Landing 52, galv. Guardrail Landing 52, galv. Guardrail Post FBP Guardrail Post GKB Guardrail Post Holder DOMINO Guardrail Post Holder TRIO Guardrail Post Holder TRIO Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post RCS/SRU 184 Guardrail Post RGP 120 Guardrail Post SGP Guardrail Post SGP Guardrail Post SGP Guardrail Post TRH Guardrail TRH 180 Guardrail TRH 270 Guardrail UPG 150 Guardrail UPG 200 Guardrail UPG 250 Guardrail UPG 300 Guardrail UPG 400 Guide Roller SB-A, B
168 168 430 456 456 474 403 456 149 530 313 325 334 529 334 306 335 356 247 293 269 258 247 269 258 402 517 105 66 89 105 123 89 151 390 415 529 501 530 306 334 356 85 85 85 475 475 475 475 475 183
021260 100863 100863 051210 051190 051220 112159 025660 025660 025670 025670 110608 111291 022007 109563
Half Round Washer HRS, galv. Handle Lock UJS Handle Lock UJS Handrail Post CB 190 Handrail Post CB 200 Handrail Post CB 370 Handrail Post Holder VARIO Hardware Box 80 x 120, galv. Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted Hardware Box 80 x 120, painted Hatch 55 x 60, foldable Head Spindle GTR 38-70/50 Head Spindle HDK45 Head Spindle Locking Device UJH
167 377 461 429 429 429 148 484 536 484 536 437 315 387 377
608
019790 019790 116081 116081 019780 019780 101774 101776 101776 101778 101779 109726 109785 111035 101773 051030 101916 100719 100719 030980 030980 030970 030970 030090 030090 030070 030070 030070 030070 030550 030590 030590 030580 030580 065020 065021 065018 065019 065025 100452 021160 027590 027590 024070 024070 024070 024080 024080 024880 104930 104096 104931 111806 103845 023650 023650 023650 023820 023820 100042 100042 107815 107815 100047 100047 106931 106931
Head Spindle TR 38 -70/50, galv. Head Spindle TR 38 -70/50, galv. Head Spindle TR 38-70/50 Head Spindle TR 38-70/50 Heavy Duty Adj. Base Plate TR 38-70/50 Heavy Duty Adj. Base Plate TR 38-70/50 Heavy Duty Spindle SLS 100/180 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 200/300 Heavy Duty Spindle SLS 260/360 Heavy Duty Spindle SLS 320/420 Heavy Duty Spindle SLS 380/480 Heavy Duty Spindle SLS 40/80 Heavy Duty Spindle SLS 80/140 Height Adjusting Unit CB Height Compensation HD, h = 200 mm Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Hex. Coupler DW 26 SW 46/150, weldable Hex. Coupler DW 26 SW 46/150, weldable Hex. Coupler DW 26 SW 46/80, weldable Hex. Coupler DW 26 SW 46/80, weldable Hex. Nut DW 15 SW 30/108, galv. Hex. Nut DW 15 SW 30/108, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, weldable Hex. Nut DW 20 SW 36/110 Hex. Nut DW 20 SW 36/110 Hex. Nut DW 20 SW 36/60 Hex. Nut DW 20 SW 36/60 HM Concrete Scraper L = 1180, B = 102 HM Concrete Scraper L = 1180, B = 170 HM Concrete Scraper L = 1180, B = 54 HM Concrete Scraper L = 900, B = 102 HM Turnover Board 16/16 mm Hook for Scaffold Components Hook Spanner HKS for GRV Hook Strap for SB-1, 2, galv. Hook Strap for SB-1, 2, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-140/160, galv. Hook Strap HB 24-140/160, galv. Hook Strap HB for VT, galv. Hook Strap Uni Double HBUD 20-24 Hook Strap Uni Double HBUD 24-28 Hook Strap Uni HBU 20-24 Hook Strap Uni HBU 24-26 U200 Hook Strap Uni HBU 24-28 Hook Tie DW 15 l = 400 mm, galv. Hook Tie DW 15 l = 400 mm, galv. Hook Tie DW 15 l = 400 mm, galv. Hook Tie Head DW 15, galv. Hook Tie Head DW 15, galv. Horizontal Brace UBH 150/150 Horizontal Brace UBH 150/150 Horizontal Brace UBH 200/150 Horizontal Brace UBH 200/150 Horizontal Brace UBH 200/200 Horizontal Brace UBH 200/200 Horizontal Brace UBH 250/150 Horizontal Brace UBH 250/150
375 367 367 375 374 368 497 187 497 497 497 497 497 497 497 425 393 379 483 194 221 194 221 213 189 213 441 405 503 213 191 219 191 220 531 531 531 531 531 490 167 184 145 136 282 440 136 440 575 137 137 137 500 137 63 89 28 63 28 382 466 382 466 382 466 382 466
609
Formwork Girders
204
248 294 269 258 286 393 436 350 436 72 152 436 248 294 270 259 286 394 436 394 259 249 295 287 249 295 270 259 287 393 437 249 295 271 260 287 394 437 249 295 271 260
Wall Formwork
Kicker AV
Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 220 x 350, telescopic Ladder 220/6 Ladder 240-360 Ladder 240-360 Ladder Base 30 adjustable, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Connector HD 200 Ladder Connector QUATTRO Ladder Connector RAPID Ladder Connector SRS Ladder Connector VARIO, adjustable Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv.
Column Formwork
028110
051410 051410 051410 051410 051410 051410 051410 107173 051420 107738 107738 109105 051460 051460 051460 051460 051460 051460 051460 104646 103391 103369 103374 111165 103718 103718 103718 103718 103718 103718 103718 051450 051450 051450 051450 051450 051450 051450 104132 104132 104132 104132
Slab Formwork
383 369 383 383 383 383 383 383 383 553 265 116 113 119 22 21 17 17 13 12 26 26 25 25 53 47 57 42 82 77 159 159 159 159 159 159 157 157 157 157 157 157 160 160 160 160 431 399 332 54 47 134
250 279 296 272 261 288 205 250 279 296 272 261 289 205 251 297 272 261 289 86 71 231 231 231
Shoring Systems
Industrial Deck UDI 25 x 100 Industrial Deck UDI 25 x 100 Industrial Deck UDI 25 x 125 Industrial Deck UDI 25 x 150 Industrial Deck UDI 25 x 200 Industrial Deck UDI 25 x 250 Industrial Deck UDI 25 x 300 Industrial Deck UDI 25 x 50 Industrial Deck UDI 25 x 75 Insert Socket SW 19 Inserting Nut, compl. Inside Corner HSE 120 Inside Corner HSE 150 Inside Corner HSE 90 Inside Corner MXI 120 x 50/20 Inside Corner MXI 120 x 60 Inside Corner MXI 270 x 50/20 Inside Corner MXI 270 x 60 Inside Corner MXI 330 x 50/20 Inside Corner MXI 330 x 60 Inside Corner MXI 60 x 50/20 Inside Corner MXI 60 x 60 Inside Corner MXI 90 x 50/20 Inside Corner MXI 90 x 60 Inside Corner TE 120-2 Inside Corner TE 270-2 Inside Corner TE 60-2 Inside Corner TE/4 330 Inside Corner TRH 330 - 66 x 66 Inside Corner TRH 420 - 66 x 66 Inside Panel I 123 x 120 Inside Panel I 123 x 240 Inside Panel I 123 x 300 Inside Panel I 123 x 360 Inside Panel I 123 x 60 Inside Panel I 123/120 2R Inside Panel I 240 x 120 Inside Panel I 240 x 120 2R Inside Panel I 240 x 240 Inside Panel I 240 x 300 Inside Panel I 240 x 360 Inside Panel I 240 x 60 Inside Panel I 72 x 120 Inside Panel I 72 x 240 Inside Panel I 72 x 300 Inside Panel I 72 x 360 Intermediate Handrail Post CB Intermediate Platform FBZ 240 Internal Bracket SRU/UZ Internal Corner TEI 120/135° Internal Corner TEI 270/135° Internal Corner Waler IRZ 75/75
Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker TRH 135 Kicker TRP KK Concrete Cone M24 67/52 KK Concrete Cone M30 80/52 KK Concrete Cone M36 90/52
Climbing Systems
106092 106092 106880 107002 108380 108540 108689 104029 105925 027200 103721 034220 034150 034160 115299 112689 115255 112419 115338 114470 115315 112726 115307 112715 022660 022580 022840 054374 108842 108830 021930 021950 021430 021970 021910 102853 021830 102855 021850 021410 021890 021810 020830 020850 020870 020890 051630 026622 112921 103284 103317 010200
028110 028110 028110 028110 028110 028110 108135 108135 108135 108135 108135 108135 108135 028120 028120 028120 028120 028120 028120 108225 054518 031652 031653 031654
Scaffolding, Stairs, Working Platforms
382 466 382 466 382 466 382 466 382 466 382 466
Bridge- and Tunnel Formwork
Horizontal Brace UBH 250/200 Horizontal Brace UBH 250/200 Horizontal Brace UBH 250/250 Horizontal Brace UBH 250/250 Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/200 Horizontal Brace UBH 300/200 Horizontal Brace UBH 300/250 Horizontal Brace UBH 300/250 Horizontal Brace UBH 300/300 Horizontal Brace UBH 300/300
Plywood, SystemIndependent Accessories
104356 104356 100049 100049 100051 100051 123483 123483 102617 102617 100053 100053
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 104132 104132 104132 108566 108568 103607 029440 029440 029440 051640 051640 024490 024500 024510 024520 024270 024270 024260 024260 108000 108172 108179 108034 108412 108190 101671 108191 107793 106608 106608 101656 101657 101658 101659 100330 100336 100339 100185 100183 100852 031631 031632 031633 114928 114818 114821 114912 114820 114916 114819 114920 114892 114924 114932 114936 115513 115157 115156 100055 100055 102846 102846 100057 100057 107867 107867 100059 610
Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder TRH 264 Ladder TRH 354 Ladder UEL w. Hook Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 80, galv. Lag Screw DIN 571 6 x 80, galv. Lag Screw DIN 571 8 x 100, galv. Lag Screw DIN 571 8 x 130, galv. Lag Screw DIN 571 8 x 140, galv. Lag Screw DIN 571 8 x 160, galv. Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 80, galv. Lag Screw DIN 571 8 x 80, galv. Landing Brace UZB 150 Landing Brace UZB 200 Landing Brace UZB 250 Landing Brace UZB 90° Landing Cover Plate UZD 150/25 Landing Guardrail UZG 150 Landing Link Panel UAB 30 Landing Transom UZL 150 Landing TRP Landing w. Ladder TRH 90 Landing w. Ladder TRH 90 Latt. Girder Alu ULA 50/425 HD Latt. Girder Alu ULA 50/525 HD Latt. Girder Alu ULA 50/625 HD Latt. Girder Alu ULA 70/825 HD Latt. Girder Steel ULS 50/425 Latt. Girder Steel ULS 50/525 Latt. Girder Steel ULS 50/625 Latt. Girder Steel ULS 70/525 Latt. Girder Steel ULS 70/625 Latt. Girder Steel ULS 70/825 Leading Anchor Coupler DW 15, compl. Leading Anchor Coupler DW 20, compl. Leading Anchor Coupler DW 26, compl. Ledger Brace UBH Flex 250/250 Ledger Brace UBH Flex 100/100 Ledger Brace UBH Flex 150/100 Ledger Brace UBH Flex 150/150 Ledger Brace UBH Flex 200/100 Ledger Brace UBH Flex 200/200 Ledger Brace UBH Flex 250/100 Ledger Brace UBH Flex 250/200 Ledger Brace UBH Flex 300/100 Ledger Brace UBH Flex 300/200 Ledger Brace UBH Flex 300/250 Ledger Brace UBH Flex 300/300 Ledger Brace UBL 100/150 Ledger Brace UBL 100/200 Ledger Brace UBL 100/50 Ledger Brace UBL 150/100 Ledger Brace UBL 150/100 Ledger Brace UBL 150/150 Ledger Brace UBL 150/150 Ledger Brace UBL 150/200 Ledger Brace UBL 150/200 Ledger Brace UBL 150/50 Ledger Brace UBL 150/50 Ledger Brace UBL 200/100
287 394 437 85 85 468 199 435 562 431 562 562 562 562 562 138 562 138 562 452 452 452 453 454 453 446 452 73 86 72 487 487 487 487 487 487 487 487 487 487 190 192 194 382 382 382 382 382 382 382 382 382 382 382 382 381 381 381 381 465 381 465 381 465 381 465 381
100059 102862 102862 100061 100061 104391 104391 100063 100063 102861 102861 100065 100065 100067 100067 104766 104766 100069 100069 104762 104762 101731 101159 101159 114632 114632 100192 114635 110347 110347 114638 114638 100021 100021 100021 114641 114641 114641 100023 100023 100023 114645 114645 114645 104780 104780 114613 114613 100025 100025 100025 114648 114648 114648 100027 100027 100027 114651 114651 114651 114654 100029 100029 100029 104779 104779 114595
Ledger Brace UBL 200/100 Ledger Brace UBL 200/150 Ledger Brace UBL 200/150 Ledger Brace UBL 200/200 Ledger Brace UBL 200/200 Ledger Brace UBL 200/50 Ledger Brace UBL 200/50 Ledger Brace UBL 250/100 Ledger Brace UBL 250/100 Ledger Brace UBL 250/150 Ledger Brace UBL 250/150 Ledger Brace UBL 250/200 Ledger Brace UBL 250/200 Ledger Brace UBL 300/100 Ledger Brace UBL 300/100 Ledger Brace UBL 300/150 Ledger Brace UBL 300/150 Ledger Brace UBL 300/200 Ledger Brace UBL 300/200 Ledger Brace UBL 300/50 Ledger Brace UBL 300/50 Ledger Bracket UHA Ledger UH 100 Ledger UH 100 Ledger UH 100 Ledger UH 100 Ledger UH 104 Ledger UH 104 Ledger UH 125 Ledger UH 125 Ledger UH 125 Ledger UH 125 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 25 Ledger UH 25 Ledger UH 25 Ledger UH 25 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 400 Ledger UH 400 Ledger UH 400 Ledger UH 400 Ledger UH 50 Ledger UH 50 Ledger UH 50
465 381 465 381 465 381 465 381 465 381 465 381 465 381 465 381 465 381 465 381 465 476 380 456 379 455 464 463 380 456 379 455 380 464 456 379 463 455 380 464 456 379 463 455 380 456 379 455 380 464 456 379 463 455 380 464 456 379 455 463 455 380 464 456 380 456 379
101395 066046 066028 066066 034240 034250 034260 103850 112761 112830
Offset Coupling VVKZ 3/99 Outside Corner Angle DAW 125 Outside Corner Angle DAW 250 Outside Corner Angle DAW 75 Outside Corner Angle HSW 120 Outside Corner Angle HSW 150 Outside Corner Angle HSW 90 Outside Corner Coupling AKZ 85/85 Outside Corner MXA 120 x 35 Outside Corner MXA 120 x 45
139 101 97 103 116 113 119 140 22 22 611
Formwork Girders
418 486 466 466 466 466 466 466 466 466 466 466 466 466 466 466 466 466 136 560 560 560 560 560 560 167 560 560 187 560 561 457 561 561 561 561 561 561 36
Wall Formwork
Nail 3 x 80 Netting Tie Node Brace UBK 100/200 Node Brace UBK 104/100 Node Brace UBK 104/200 Node Brace UBK 125/200 Node Brace UBK 150/100 Node Brace UBK 150/150 Node Brace UBK 150/200 Node Brace UBK 200/100 Node Brace UBK 200/150 Node Brace UBK 200/200 Node Brace UBK 250/100 Node Brace UBK 250/150 Node Brace UBK 250/200 Node Brace UBK 300/100 Node Brace UBK 300/200 Node Brace UBK 72/200 Nut ISO 4032 M 8-8, galv. Nut ISO 4032 M 8-8, galv. Nut ISO 4032 M10-8, galv. Nut ISO 4032 M12-8, galv. Nut ISO 4032 M16-10, galv. Nut ISO 4032 M16-8, galv. Nut ISO 4032 M24-10, galv. Nut ISO 4032 M24-8, galv. Nut ISO 4032 M24-8, galv. Nut ISO 4032 M30-10, galv. Nut ISO 4032-M20-8, galv. Nut ISO 4032-M20-8, galv. Nut ISO 7042 M10-8, galv. Nut ISO 7042 M12-8, galv. Nut ISO 7042 M12-8, galv. Nut ISO 7042 M16-8, galv. Nut ISO 7042 M20-8, galv. Nut ISO 7042 M24-8, galv. Nut ISO 7042 M6-8, galv. Nut ISO 7042 M8-8, galv. Nut Sealing Sleeve MX Ø 16
Column Formwork
710312 100871 112926 100977 100840 112765 100981 100973 100572 100985 106630 100573 100989 106624 100574 100993 100575 100969 024090 024090 710234 710330 710238 710229 706488 022250 022250 710336 710334 710334 780356 710381 710381 070890 781053 105032 722086 711071 112338
Slab Formwork
35 232 551 138 546 547 392 391 391 391 301 300 300 28 27 409 406 415 100 58 60 100 103 96 96 115 112 118 21 17
12 53 47 42 352 355 348 348 348 348 348 349 349 349 349 352
Shoring Systems
Magnet Cone Spanner MX Magnet Cone Spanner MX Magnet Cone Spanner MX Magnet Holder for SCU 7-9 Magnet Holder for SCU 7-9 Magnet Holder for DSSE 642 Main Beam Clamp HD 70 mm, galv. Main Beam HDT 280 Main Beam HDT 440 Main Beam HDT 880 Main Beam SLT 150 Main Beam SLT 225 Main Beam SLT 375 MAXIMO Waler MAR 170-2 MAXIMO Waler MAR 85-2 Mounting Extension ASG for Loop Mounting Head FB Mounting Plate ASG Multi Panel Alu DMA 125 x 75 Multi Panel Alu TAM 270 x 72 Multi Panel Alu TAM 90 x 72 Multi Panel DM 125 x 75 Multi Panel DM 75 x 75 Multi Panel DOMINO Alu DMA 250 x 75 Multi Panel DOMINO DM 250 x 75 Multi Panel HSM 120 x 45 Multi Panel HSM 150 x 45 Multi Panel HSM 90 x 45 Multi Panel MXM 120 x 60 Multi Panel MXM 270 x 60
Multi Panel MXM 330 x 60 Multi Panel TRM 120 x 72 Multi Panel TRM 270 x 72 Multi Panel TRM/4 330 x 72 MULTIPROP Bolt with Nut MULTIPROP Bolt with Nut MULTIPROP MP 120 MULTIPROP MP 250 MULTIPROP MP 350 MULTIPROP MP 480 MULTIPROP MP 625 MULTIPROP Platform 150 x 60 MULTIPROP Platform 150 x 60 with Hatch MULTIPROP Platform 225 x 60 MULTIPROP Platform 225 x 60 with Hatch MULTIPROP Strap SRZ U100 - U140
Climbing Systems
114797 114797 114797 072230 072230 024922 106183 022010 022009 022008 061110 061100 061160 114036 114034 026638 026632 026536 066052 023860 023980 066042 066062 066032 066024 034110 034100 034120 112850 112849
114464 022630 022540 054344 111142 111142 027288 027289 027290 027291 027305 107169 107171 107170 107172 027302
Scaffolding, Stairs, Working Platforms
455 464 463 380 456 379 455 450 485 537 502 336 336 67 266 30 67 267 108 30 68 68 267 277 68 267 482 379 462 482 124 560 560 409 387 321
Bridge- and Tunnel Formwork
Ledger UH 50 Ledger UH 72 Ledger UH 72 Ledger UH 75 Ledger UH 75 Ledger UH 75 Ledger UH 75 Ledger with Lap UHP 200 Lid for Wire Crate Pallet 80 x 120, painted Lid for Wire Crate Pallet 80 x 120, painted Lifting Beam RCS 10 t Lifting Fork 1 t / 5,0 m Lifting Fork 1,75 t / 8,0 m Lifting Gear "Combi"-2 TRIO Lifting Gear "Combi"-2 TRIO Lifting Gear-3 TRIO Lifting Gear-3 TRIO Lifting Gear-3 TRIO Lifting Hook DOMINO 500 kg Lifting Hook MAXIMO 1.5 t Lifting Hook MAXIMO 1.5 t Lifting Hook TRIO 1.5 t Lifting Hook TRIO 1.5 t Lifting Pin LICO Lifting Pin TRIO Lifting Pin TRIO Locking Bolt Ø 48/57 Locking Pin Ø 48 Locking Pin Ø 48 Locking Pin Ø 48 Locking Strip HSS 60 Loop Bolt M20, left, galv. Loop Bolt M20, right, galv. Loop Mounting Head-2 FB, galv. Lowering Device HDA Lowering Head 20/24, galv.
Plywood, SystemIndependent Accessories
114595 100440 114124 100017 100017 114629 114629 106626 065067 065067 112986 101862 103212 044760 044760 044770 044770 044770 066091 115168 115168 023690 023690 115019 023440 023440 100478 111053 111053 111053 034530 711060 110281 026645 022003 028870
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 112888 112667 112806 112887 114486 114478 112778 112837 112822 112889 103330 103337 108785 108808 021920 102854 021940 021420 021960 021900 021820 102856 021840 021400 021880 021800 020820 020840 020860 020880
Outside Corner MXA 120 x 90 Outside Corner MXA 270 x 35 Outside Corner MXA 270 x 45 Outside Corner MXA 270 x 90 Outside Corner MXA 330 x 35 Outside Corner MXA 330 x 45 Outside Corner MXA 60 x 35 Outside Corner MXA 60 x 45 Outside Corner MXA 60 x 90 Outside Corner MXA 90 x 90 Outside Corner TEA 120/135° Outside Corner TEA 270/135° Outside Corner TRH 330 - 90 x 90 Outside Corner TRH 420 - 90 x 90 Outside Panel A 128 x 120 Outside Panel A 128 x 120 2R Outside Panel A 128 x 240 Outside Panel A 128 x 300 Outside Panel A 128 x 360 Outside Panel A 128 x 60 Outside Panel A 250 x 120 Outside Panel A 250 x 120 2R Outside Panel A 250 x 240 Outside Panel A 250 x 300 Outside Panel A 250 x 360 Outside Panel A 250 x 60 Outside Panel A 85 x 120 Outside Panel A 85 x 240 Outside Panel A 85 x 300 Outside Panel A 85 x 360
22 18 18 18 13 13 27 27 26 25 54 48 84 79 158 158 158 158 158 158 156 156 156 156 156 156 160 160 160 160
727165 727165 727165 111738 111738 111396 111396 065080 065080 065081 065081 061510 061510 061510 106939 106939 103434 103434 103434 103429 103429 103429 061530 061530 061500 061500 065050 065050 023880 023870 023850 023900 023960 023950 061290 066040
PACTAN Sealing, brown, 310 ccm PACTAN Sealing, brown, 310 ccm PACTAN Sealing, brown, 310 ccm Palett GF 85 x 210, galv. Palett GF 85 x 210, galv. Palett RP 80 x 110, galv. Palett RP 80 x 110, galv. Pallet HS 120 x 90, galv. Pallet HS 120 x 90, galv. Pallet HS 150 x 90, galv. Pallet HS 150 x 90, galv. Pallet Lifting Trolley 1500 mm Pallet Lifting Trolley 1500 mm Pallet Lifting Trolley 1500 mm Pallet RP 110 x 125, painted Pallet RP 110 x 125, painted Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 150, galv. Pallet RP-2 80 x 150, galv. Pallet RP-2 80 x 150, galv. Pallet SD 150 x 225, galv. Pallet SD 150 x 225, galv. Pallet SD 150 x 75, galv. Pallet SD 150 x 75, galv. Pallet ST 100/2, galv. Pallet ST 100/2, galv. Panel Alu TRA 270 x 30 Panel Alu TRA 270 x 60 Panel Alu TRA 270 x 90 Panel Alu TRA 90 x 120 Panel Alu TRA 90 x 30 Panel Alu TRA 90 x 60 Panel Clip SPK Panel D 125 x 100
583 595 591 316 539 316 537 124 539 125 540 308 485 542 484 537 324 484 536 324 484 536 307 538 308 538 370 539 58 58 57 59 59 59 304 99
612
066044 066043 066041 066060 066064 066063 066061 066050 066051 066020 066026 066025 066022 066021 066023 034080 034070 034060 034050 034010 034020 034040 034030 061020 061011 061000 061030 061013 061010 022600 022514 022650 022640 022610 022620 022510 022570 022560 022550 022530 022520 022820 022810 022800 022790 054314 054304 054364 054354 054334 054324 107474 107470 107481 107480 107473 107472 107493 107492 107498 107497 107503 107502 022601 022651 022641 022621
Panel D 125 x 25 Panel D 125 x 50 Panel D 125 x 75 Panel D 75 x 100 Panel D 75 x 25 Panel D 75 x 50 Panel D 75 x 75 Panel DA 125 x 100 Panel DA 125 x 75 Panel DOMINO 250 x 100 Panel DOMINO 250 x 25 Panel DOMINO 250 x 50 Panel DOMINO 250 x 75 Panel DOMINO DA 250 x 100 Panel DOMINO DA 250 x 75 Panel HS 120 x 30 Panel HS 120 x 60 Panel HS 150 x 30 Panel HS 150 x 60 Panel HS 150 x 90 Panel HS 90 x 120 Panel HS 90 x 30 Panel HS 90 x 60 Panel SDP 150 x 37.5 Panel SDP 150 x 50 Panel SDP 150 x 75 Panel SDP 75 x 37.5 Panel SDP 75 x 50 Panel SDP 75 x 75 Panel TR 120 x 120 Panel TR 120 x 240 Panel TR 120 x 30 Panel TR 120 x 60 Panel TR 120 x 90 Panel TR 120 x7 2 Panel TR 270 x 120 Panel TR 270 x 240 Panel TR 270 x 30 Panel TR 270 x 60 Panel TR 270 x 72 Panel TR 270 x 90 Panel TR 60 x 30 Panel TR 60 x 60 Panel TR 60 x 72 Panel TR 60 x 90 Panel TR/4 330 x 120 Panel TR/4 330 x 240 Panel TR/4 330 x 30 Panel TR/4 330 x 60 Panel TR/4 330 x 72 Panel TR/4 330 x 90 Panel TRH 264 x 180 A Panel TRH 264 x 180 I Panel TRH 264 x 270 A Panel TRH 264 x 270 I Panel TRH 264 x 360 A Panel TRH 264 x 360 I Panel TRH 264 x 540 A Panel TRH 264 x 540 I Panel TRH 354 x 180 A Panel TRH 354 x 180 I Panel TRH 354 x 270 A Panel TRH 354 x 270 I Panel TRIO Structure TS 120 x Panel TRIO Structure TS 120 x Panel TRIO Structure TS 120 x Panel TRIO Structure TS 120 x
120 30 60 72
99 99 99 103 102 102 102 100 100 94 95 94 94 95 95 115 115 112 112 112 118 117 118 300 300 300 300 300 300 52 51 53 52 52 52 45 45 46 46 46 45 57 57 57 56 40 40 41 41 41 40 83 81 83 80 83 80 82 79 78 76 78 76 61 61 61 61
613
Formwork Girders Wall Formwork Column Formwork Slab Formwork
584 153 414 414 438 438 438 438 501 151 151 151 424 317 150 428 305 305 306 150 150 69 69 69 69 69 69 69 148 148 148 148 148 515 218 526 218 34 106 121 277 573 63 573 584 265 584 407 417 442 515 573 522 522 418 418 104 104 104 428 547 138 546 548 549 532 222
Shoring Systems
Plastic Sleeve DW 20 Plate Fl 50 x 20 x 120, ESP Platform ASG 70-100/240 Platform ASG 70-100/298 Platform Beam BR U100 Platform Beam BR U120 Platform Beam BR U140 Platform Beam BR U160 Platform Beam RCS/SRU 113 Platform Beam VARIO, left Platform Beam VARIO, right Platform Bracket VARIO VBK 90 Platform Connection CB 160 Platform GIP 200, complete Platform Guardrail 80 Platform Post CB 225 Platform SDB 150 Platform SDB 225 Platform SDB 300 Platform Strut 167 VARIO Platform Strut 246 VARIO Platform TRP 120 Platform TRP 120 with Hatch Platform TRP 240 Platform TRP 240 with Hatch Platform TRP 60 Platform TRP 72 Platform TRP 90 Platform VARIO 100/187.5 Platform VARIO 100/100 Platform VARIO 100/125 with Hatch Platform VARIO 100/250 Platform VARIO 100/250 with Hatch Plug 32 mm Fibre Reinforced Concrete Plug DR 22 Plug for Stopend Sleeve DW 15 Plug FZR 22 mm Plug MXM Ø 21 Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20/24 mm Plug Ø 20/24 mm Plug Ø 20/24 mm Plug Ø 25 mm for TRS Plug Ø 25 mm for TRS Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plywood 4 mm 2500 x 1250 mm Plywood 8 mm 2500 x 1250 mm Plywood board 2400 x 470 Plywood board 2980 x 470 Positioning DEA 90° Positioning DGE 135° external Positioning DGE 135° internal Post Extension CB 180 Power-Screwdriver DSSE 642 Power-Screwdriver SCU 7-9 Power-Screwdriver SCU 7-9 Pre-Cutter HM Ø 40 mm Pre-Cutter VHM Ø 60 mm Pressure Sprayer Pretension Jack for DW 15/20/26
Climbing Systems
750135 701991 105843 105844 020320 020510 020310 020520 114301 105480 105484 105823 051120 111566 100813 051200 061060 061061 061062 101273 101269 054501 054506 054500 054505 054504 054503 054502 102920 103203 102415 105986 105985 116234 065036 065060 031360 116353 030290 030290 030290 030290 030300 030300 030300 030320 030320 026250 026250 026250 026250 026250 052010 052020 105842 105841 066100 066097 066095 051050 024920 072210 072210 105317 105331 031520 030460
Scaffolding, Stairs, Working Platforms
61 60 60 60 60 60 60 60 60 60 60 60 60 61 60 60 81 77 304 472 473 527 361 361 361 361 361 361 361 361 361 361 361 361 361 361 107 66 123 521 521 521 521 572 521 521 490 490 490 490 490 490 490 490 490 489 572 573 572 572 572 166 569 403 487 487 584
Bridge- and Tunnel Formwork
Panel TRIO Structure TS 120 x 90 Panel TRIO Structure TS 270 x 120 Panel TRIO Structure TS 270 x 240 Panel TRIO Structure TS 270 x 30 Panel TRIO Structure TS 270 x 60 Panel TRIO Structure TS 270 x 72 Panel TRIO Structure TS 270 x 90 Panel TRIO Structure TS/4 330 x 120 Panel TRIO Structure TS/4 330 x 240 Panel TRIO Structure TS/4 330 x 30 Panel TRIO Structure TS/4 330 x 60 Panel TRIO Structure TS/4 330 x 72 Panel TRIO Structure TS/4 330 x 90 Panel TRIO Structure TSM 120 x 72 Panel TRIO Structure TSM 270 x 72 Panel TRIO Structure TSM/4 330 x 72 Panel w. Corner Platform TRH 264 x 270 I Panel w. Corner Platform TRH 354 x 270 I Panel Wedge Clip SPKK Pavement Gantry UVG 104/240 Pavement Gantry UVG 176/240 Peg PEP Frames PRK 100 PEP Frames PRK 120 PEP Frames PRK 137,5 PEP Frames PRK 150 PEP Frames PRK 180 PEP Frames PRK 200 PEP Frames PRK 201,5 PEP Frames PRK 210 PEP Frames PRK 225 PEP Frames PRK 230 PEP Frames PRK 266 PEP Frames PRK 296 PEP Frames PRK 62,5 PEP Frames PRK 75 Perforated Foundation Tie, 25 m Perforated Foundation Tie, 25 m Perforated Foundation Tie, 25 m PERI Beto 21 mm 1250 x 2500 mm PERI Beto 21 mm 1500 x 3000 mm PERI Beto 21 mm 625 x 2500 mm PERI Birch 21 mm 1250 x 2500 mm PERI Hotknife PERI Spruce 21 mm 2500 x 1250 mm PERI Spruce 21 mm 2500 x 500 mm PERI UP Assembly Certificate, CDN PERI UP Assembly Certificate, CZ PERI UP Assembly Certificate, D PERI UP Assembly Certificate, ES PERI UP Assembly Certificate, EX PERI UP Assembly Certificate, F PERI UP Assembly Certificate, PL PERI UP Assembly Certificate, PT PERI UP Assembly Certificate, TR PERI UP Scaffold Tag Peridrain Clip Peridrain Edge Strip Peridrain Edge Strip Clip Peridrain Fabric b = 1.50, l = 25.0 m Peridrain Fabric b = 2.80, l = 25.0 m Pin for GRB, galv. Pin for GRB, galv. Pipe Bracing Connector, galv. Plastic Sheeting UT 2.70 x 20.0 m Plastic Sheeting UT 3.25 x 20.0 m Plastic Sleeve Corner DW 20
Plywood, SystemIndependent Accessories
022611 022511 022571 022561 022551 022531 022521 054315 054305 054365 054355 054335 054325 022631 022541 054345 108983 108984 061280 106965 100322 065042 112813 112814 111813 111814 115980 112718 111815 112788 111816 111817 111818 111819 111811 111812 023020 023020 023020 052821 052822 052824 052820 031675 052830 052831 113835 113839 113833 113836 113834 113829 113838 113837 115739 113832 102098 102110 102099 031674 031673 022210 022210 026644 102021 102023 750134
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 023560 106434 106433 106432 106429 103058 103059 103060 103061 103066 103067 103062 103063 103065 022004 022006 022005 103993 111276 054461 109910 061200 101404 101319 101318 101311 101464 100518 100516 100503 100514 028990 103800 028210 028220 028010 028010 028010 028010 028010 028010 028010 028010 028020 028020 028020 028020 028020 028020 028020 028020 028030 028030 028030 028030 028030 028030 114300
Projection Waler TVR45/45 Prop PEP 10-250 A Prop PEP 10-300 A Prop PEP 10-350 A Prop PEP 10-400 A Prop PEP 20-300 Prop PEP 20-350 Prop PEP 20-400 Prop PEP 20-500 Prop PEP 30-150 Prop PEP 30-250 Prop PEP 30-300 Prop PEP 30-350 Prop PEP 30-400 Prop Section HDS 270 Alu Prop Section HDS 30 Alu Prop Section HDS 90 Alu Prop section HDSS 210 Steel Prop Section HDSS 90 Steel Prop with Kicker TRH 116 Prophead GFH, galv. Prophead SSK Protection Board 100 Protection Board 125 Protection Board 187.5 Protection Board 250 Protection Board IE 75/75 Protection Panel UPP 150 x 100 Protection Panel UPP 200 x 100 Protection Panel UPP 250 x 100 Protection Panel UPP 300 x 100 Push-Pull Prop RS 1000, galv. Push-Pull Prop RS 1400, galv. Push-Pull Prop RS I Push-Pull Prop RS II Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III PVC Plug MX Ø 17,5 - 22
62 362 362 362 362 360 360 360 360 360 360 360 360 360 386 386 386 386 386 86 313 302 131 130 129 128 132 474 474 474 474 203 204 202 202 202 87 249 278 295 271 260 288 203 175 250 279 296 271 260 288 203 250 296 271 260 288 34
109924 109925 109926 109923 034660 034670 025200 025210
QUATTRO Frame QES 125 QUATTRO Frame QES 275 QUATTRO Frame QES 350 QUATTRO Frame QES 50 Quick Connector HSSA 10/12, galv. Quick Connector HSSA 14/16, galv. Quick Release Corner SSE 1,0 m Quick Release Corner SSE 2,0 m
255 254 254 255 121 121 144 144
614
025220 025230 025240 025250 024640 108339
Quick Quick Quick Quick Quick Quick
Release Corner SSE 3,0 m Release Corner SSE 4,0 m Release Corner SSE 5,0 m Release Corner SSE Spec. Leng Str. Hook Strap 24-100/140, galv. Strap MPB 24/GT 24
051040 027180 027180 021790 021790 021790 029610 029610 072180 072180 072180 072180 051764 031440 031455 031420 031435 083041 083042 083045 083044 083043 083046 083025 083030 083024 083029 083028 083027 083026 083015 083020 083014 083019 083018 083017 083016 083008 083013 083007 083009 083012 083011 083010 083037 083036 083035 083034 083023 083022 083021 083031 083033 083032 083040 083039 083038 083048 083047 083049
Rack CB 240 Ratchet Lever SW 19 Ratchet Lever SW 19 Ratchet Spanner SW 24 "Combi" Ratchet Spanner SW 24 "Combi" Ratchet Spanner SW 24 "Combi" Ratchet Wrench 1" Ratchet Wrench 1" Ratchet Wrench 1/2" Ratchet Wrench 1/2" Ratchet Wrench 1/2" Ratchet Wrench 1/2" Ratchet Wrench 3/4" Release Agent Bio Clean, 20 L Release Agent Bio Clean, 208 L Release Agent PERI Clean, 20 L Release Agent PERI Clean, 208 L Repair Service RG, TAM 270 x 72 Repair Service RG, TAM 90 x 72 Repair Service RG, TE 120 Repair Service RG, TE 270 Repair Service RG, TE 330 Repair Service RG, TE 60 Repair Service RG, TR 120 x 120 Repair Service RG, TR 120 x 24 Repair Service RG, TR 120 x 240 Repair Service RG, TR 120 x 30 Repair Service RG, TR 120 x 60 Repair Service RG, TR 120 x 72 Repair Service RG, TR 120 x 90 Repair Service RG, TR 270 x 120 Repair Service RG, TR 270 x 24 Repair Service RG, TR 270 x 240 Repair Service RG, TR 270 x 30 Repair Service RG, TR 270 x 60 Repair Service RG, TR 270 x 72 Repair Service RG, TR 270 x 90 Repair Service RG, TR 330 x 120 Repair Service RG, TR 330 x 24 Repair Service RG, TR 330 x 240 Repair Service RG, TR 330 x 30 Repair Service RG, TR 330 x 60 Repair Service RG, TR 330 x 72 Repair Service RG, TR 330 x 90 Repair Service RG, TR 60 x 30 Repair Service RG, TR 60 x 60 Repair Service RG, TR 60 x 72 Repair Service RG, TR 60 x 90 Repair Service RG, TRA 270 x 30 Repair Service RG, TRA 270 x 60 Repair Service RG, TRA 270 x 90 Repair Service RG, TRA 90 x 120 Repair Service RG, TRA 90 x 30 Repair Service RG, TRA 90 x 60 Repair Service RG, TRM 120 x 72 Repair Service RG, TRM 270 x 72 Repair Service RG, TRM 330 x 72 Repair Service RG, TRS 120 x 90 Repair Service RG, TRS 270 x 90 Repair Service RG, TRS 60 x 90
144 144 144 144 136 355 423 438 553 163 516 554 233 549 139 233 516 549 549 532 532 533 533 582 582 581 582 582 581 581 581 581 581 581 581 581 582 582 582 582 582 582 582 582 582 582 582 582 582 582 581 581 581 581 582 582 582 582 582 582 581 582 582 582 582 582
615
Formwork Girders
403 486 186 185 185 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 176 188 370 394 430 480 576 105 163
Wall Formwork
Safety Net 6.0 x 2.0 m Safety Net 6.0 x 2.0 m SB-L Anchor Bracket SB-L Tension Strut, l = 740 mm SB-L Tension Strut, l = 740 mm Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaffold Bracket DG 85 Scaffold Bracket GB 80
Column Formwork
026530 026530 100903 100901 100901 026411 026411 026411 026411 026411 026411 026411 026412 026412 026412 026412 026412 026412 026412 026413 026413 026413 026413 026413 026413 026413 026414 026414 026414 026414 026414 026414 026414 026419 026419 026419 026419 026419 026419 026419 026418 026418 026418 026418 026418 026418 026418 026415 026415 026415 026415 026415 026415 026415 066085 027110
Slab Formwork
554 583 594 590 216 547 594 580 520 520
Shoring Systems
Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Rock Anchor HB DW 15 Router DW 625-E RS Cleaning Service SKYDECK RS Cleaning Service TRIO Rus-Ply 21 mm 1250 x 2500 mm Rus-Ply 21 mm 1500 x 3000 mm
Climbing Systems
044890 044890 044890 044890 108795 106081 071209 071202 052261 052271
Scaffolding, Stairs, Working Platforms
594 594 594 594 594 594 581 581 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 580 581 581 581 581 581 581 580 580 580 581 581 581 218 70 548 548 548 549 480 480 480 564 564 564 564 595 564 564 583 590
Bridge- and Tunnel Formwork
Repair Service RK, SDP 150 x 37,5 Repair Service RK, SDP 150 x 50 Repair Service RK, SDP 150 x 75 Repair Service RK, SDP 75 x 37,5 Repair Service RK, SDP 75 x 50 Repair Service RK, SDP 75 x 75 Repair Service RK, TAM 270 x 72 Repair Service RK, TAM 90 x 72 Repair Service RK, TE 120 Repair Service RK, TE 270 Repair Service RK, TE 330 Repair Service RK, TE 60 Repair Service RK, TR 120 x 120 Repair Service RK, TR 120 x 24 Repair Service RK, TR 120 x 240 Repair Service RK, TR 120 x 30 Repair Service RK, TR 120 x 60 Repair Service RK, TR 120 x 72 Repair Service RK, TR 120 x 90 Repair Service RK, TR 270 x 120 Repair Service RK, TR 270 x 24 Repair Service RK, TR 270 x 240 Repair Service RK, TR 270 x 30 Repair Service RK, TR 270 x 60 Repair Service RK, TR 270 x 72 Repair Service RK, TR 270 x 90 Repair Service RK, TR 330 x 120 Repair Service RK, TR 330 x 24 Repair Service RK, TR 330 x 240 Repair Service RK, TR 330 x 30 Repair Service RK, TR 330 x 60 Repair Service RK, TR 330 x 72 Repair Service RK, TR 330 x 90 Repair Service RK, TR 60 x 30 Repair Service RK, TR 60 x 60 Repair Service RK, TR 60 x 72 Repair Service RK, TR 60 x 90 Repair Service RK, TRA 270 x 30 Repair Service RK, TRA 270 x 60 Repair Service RK, TRA 270 x 90 Repair Service RK, TRA 90 x 120 Repair Service RK, TRA 90 x 30 Repair Service RK, TRA 90 x 60 Repair Service RK, TRM 120 x 72 Repair Service RK, TRM 270 x 72 Repair Service RK, TRM 330 x 72 Repair Service RK, TRS 120 x 90 Repair Service RK, TRS 270 x 90 Repair Service RK, TRS 60 x 90 Repoxal Glue, 1 kg Retainer Corner Platform TRP Reverse Plate HM Ø 40 mm Reverse Plate Twist Drill HM Ø 40 mm Reverse Plate Twist Drill VHM Ø 60 mm Reverse Plate VHM 28,5 Ø 60 mm Ring Bolt UFE 12/120 Ring Bolt UFE 12/190 Ring Bolt UFE 12/90 Rivet DIN 7337 A 4,8 x 23, Alu Rivet DIN 7337 A 5 x 12, Alu Rivet DIN 7337 A 6 x 10, Steel Rivet DIN 7337 B 5 x 20, GAV Rivet DIN 7337 B 5 x 20, GAV Rivet DIN 7337 B 5 x 25, Alu Rivet DIN 7337 B 5 x 30, Alu Rivet DIN 7337 B 5 x 30, Alu Rivet DIN 7337 B 5 x 30, Alu
Plywood, SystemIndependent Accessories
082003 082002 082001 082006 082005 082004 082041 082042 082045 082044 082043 082046 082025 082030 082024 082029 082028 082027 082026 082015 082020 082014 082019 082018 082017 082016 082008 082013 082007 082012 082011 082010 082009 082037 082036 082035 082034 082023 082022 082021 082031 082033 082032 082040 082039 082038 082048 082047 082049 031550 107019 105318 105311 105326 105330 100694 100695 100693 722083 780304 722318 780305 780305 780302 730050 730050 730050
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 027110 027110 022017 034560 023590 023680 023680 023670 023670 029470 029470 029490 110084 026416 027298 027299 034690 071218 071219 114158 114158 026647 026647 017040 017040 017040 024530 024310 024350 112937 112937 110675 110675 071217 071217 071217 071216 071216 071216 112342 111072 710262 021770 111603 105524 105523 105525 111655 022018 071358 071356 071351 071359 071355 071357 071361 107801 107810 115504 115291 110044 051610 031645 031646 031647 031650 031651 616
Scaffold Bracket GB 80 Scaffold Bracket GB 80 Scaffold Bracket HD 75 Scaffold Bracket HSK 80 Scaffold Bracket TRG 100/112 Scaffold Bracket TRG 120 Scaffold Bracket TRG 120 Scaffold Bracket TRG 80 Scaffold Bracket TRG 80 Scaffold Mounting Ring M24, galv. Scaffold Mounting Ring M24, galv. Scaffold Mounting Ring M36, galv. Scaffold Tube Adapter RCS Ø 48 Scaffold Tube Alu Ø 48,3 x 4,0, per m Scaffold Tube Coupler MG-A/C Scaffold Tube Coupler MG-B/D Scaffold Tube Holder HSGH Screw Change HB, incl. Screws Screw Change HBU, HBUD Screw on Cone-2 M24/DW 20, galv. Screw on Cone-2 M24/DW 20, galv. Screw Plate DW 15/115, galv. Screw Plate DW 15/115, galv. Screw-On Coupler AK 48, galv. Screw-On Coupler AK 48, galv. Screw-On Coupler AK 48, galv. Screwnail 40mm, galv. Screwnail 70 mm, galv. Screwnail 90 mm, galv. Sealing Cone MX 55 Sealing Cone MX 55 Sealing Cone TRH 55 Sealing Cone TRH 55 Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 60 mm in Surface Sealing Sleeve MX Ø 16 Section Spindle UJK 38-110/41 Selftapping Screw 5,5 x 45 TX 30, galv. Selftapping Screw 6,3 x 32, galv. Shaft Element DSE 275 Shaft Element TSE 120 Shaft Element TSE 270 Shaft Element TSE 330 Shaft Panel DSE 125 Shear Pin HDA Shop Drawings for FB 180 Shop Drawings for MULTIFLEX Shop Drawings for MX, TRIO, DO, HS Shop Drawings for RCS, CB, SKS Shop Drawings for SKYDECK Shop Drawings for Slab Tables Shop Drawings for Special Forms Shoring Brace UBS 150/100 Shoring Brace UBS 150/150 Shoring Brace UBS 200/100 Shoring Brace UBS 200/150 Shuttering Aid GFA Side Guardrail Post SK Anchor Cone DW 15 SK Anchor Cone DW 20 SK Anchor Cone DW 26 SK Concrete Cone DW 20, 67/60 SK Concrete Cone DW 26, 100/60
147 285 390 122 65 31 65 31 65 433 407 198 500 576 351 351 121 136 137 433 407 70 404 430 481 577 564 564 564 35 227 90 227 583 590 594 583 590 594 35 377 563 564 97 55 49 43 101 387 598 598 598 598 598 598 598 383 383 383 383 313 431 228 228 228 230 230
104643 031648 031649 031639 031657 031657 031656 031656 031671 031672 031677 065063 750132 750133 108869 103844 722457 711063 114107 114107 114107 051430 072170 072170 029620 102784 029650 029650 057276 102785 102785 029630 029630 029640 031480 031480 031480 031480 031480 070711 070711 070712 070712 070710 070710 070713 070713 020620 110022 110023 054464 065030 065031 065027 031626 031627 031627 031634 031634 100750 030820 113183 116432 027211 027211 027213 027213
SK Lead Cone DW 15 SK Sealing Washer DW 20 SK Sealing Washer DW 26 SK Sealing Washer UNI DW 15 SK Tongs for Concrete Cone 100 SK Tongs for Concrete Cone 100 SK Tongs for Concrete Cone 67 SK Tongs for Concrete Cone 67 SK Tube Seal 22 SK Tube Seal 28 SK Tube Seal 42 Slab Stopend Bar 105 Sleeve 18 -DW 20, Base Piece Sleeve 18 -DW 20, Head Piece Sleeve for Cavity Wall Bracket ASG Sleeve HBU/HBUD, galv. Sleeve ISO 8752 10 x 70, galv. Sleeve ISO 8752 5 x 35, galv. Sleeve SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Sliding Hatch Cover Socket SW 13-1/2" l = 80 mm Socket SW 13-1/2" l = 80 mm Socket SW 19-1/2" Socket SW 24-1/2" Socket SW 27-1/2" Socket SW 27-1/2" Socket SW 30-3/4" Socket SW 36-3/4" Socket SW 36-3/4" Socket SW 46-1" Socket SW 46-1" Socket SW 55-1" Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, Ü-Marking Softwood Timber DIN 4074-1, Ü-Marking Spacer for Platform Beam BR Spacer M20-82 Spacer M24-82 Spacer TRH 15-30 Spacer Tube rough DR 22 l = 0.21 m Spacer Tube rough DR 22 l = 0.27 m Spacer Tube rough DR 22 l = 2.00 m Spacer Tube rough DR 28 l = 3.00 m Spacer Tube rough DR 32 l = 3.00 m Spacer Tube rough DR 32 l = 3.00 m Spacer Tube rough DR 42 l = 3,00 m Spacer Tube rough DR 42 l = 3,00 m Spacer UEC 10 Spanner for Clamp Lock, galv. Spanner for Sealing Sleeve MX Ø 16 Spanner LICO Spanner SW 46, for SB Spanner SW 46, for SB Spanner SW 70, for SB Spanner SW 70, for SB
230 229 229 228 232 552 232 552 229 229 229 526 584 584 416 137 569 569 32 182 184 437 139 547 549 516 234 550 550 516 550 233 550 550 233 410 418 438 554 487 576 487 576 487 576 487 576 439 500 501 87 217 217 217 217 190 217 192 195 482 575 36 277 188 552 188 552
617
Formwork Girders Wall Formwork Column Formwork Slab Formwork
378 461 488 392 467 450 467 450 451 467 450 451 467 450 451 467 467 467 450 133 133 133 133 133 133 186 133 133 133 133 282 282 282 282 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135
Shoring Systems
Standard UVR 50 Standard UVR 50 Starter Tube ULB 50/70 Steel Beam Clamp IPB 300 - 1000 Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 150 Public Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 200 Public Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 250 Public Steel Deck UDS 32 x 300 Steel Deck UDS 32 x 400 Steel Deck UDS 32 x 72 Steel Deck UDS 32 x 72 Steel Waler SRZ U-100 l = 0.95m Steel Waler SRZ U-100 l = 1.20m Steel Waler SRZ U-100 l = 1.45m Steel Waler SRZ U-100 l = 1.825m Steel Waler SRZ U-100 l = 1.95m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 2.95m Steel Waler SRZ U-100 Spec. Length Steel Waler SRZ U-120 Spec. Length Steel Waler SRZ U-140 Spec. Length Steel Waler SSRZ U-100. Spec. Length Steel Waler SSRZ-24 U-100 l = 0.97/0.85 m Steel Waler SSRZ-24 U-100 l = 1,13/1,01 m Steel Waler SVRZ U-100 l = 1.20 m Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-140 l = 4.97 m
Climbing Systems
102859 102859 100529 022026 100486 100486 100355 100355 106585 100373 100373 106586 100375 100375 106587 100377 100820 100488 100488 010600 010030 010610 010060 010070 010050 010050 010120 010080 010150 010090 012080 012150 012160 012050 103868 103868 103871 103871 103874 103874 103877 103877 103886 103886 103889 103889 103898 103898 103892 103892 103929 103929 103903 103903 103906 103906 103915 103915 103918 103918 103922 103922 103925 103925 103928 103928 103943
Scaffolding, Stairs, Working Platforms
188 552 573 564 564 564 564 564 564 245 379 488 498 497 376 368 98 498 183 532 584 108 108 69 268 584 108 540 315 541 30 68 540 29 267 366 448 448 452 448 448 449 449 450 446 446 447 447 447 446 446 370 395 481 577 312 378 461 378 461 378 461 378 461 455 378 461
Bridge- and Tunnel Formwork
Spanner SW 80, for SB Spanner SW 80, for SB Spax Screw SK 3,5 x 45, galv. Spax Screw TX 30 6 x 100, yellow galv. Spax Screw TX 30 6 x 120, yellow galv. Spax Screw TX 30 6 x 140, yellow galv. Spax Screw TX 30 6 x 160, yellow galv. Spax Screw TX 30 6 x 180, yellow galv. Spax Screw TX 30 8 x 20, yellow galv. Spherical Nut DW 15, galv. Spigot ULT 32 Spigot ULT 32 Spindle Adapter SKS/RCS Spindle Adapter SLS/RCS Spindle Head SRU Spindle Safety Strap ST 100, galv. Spindle Shaft Element DSE Spindle Spreader HD Spindle TR 60 x 9/43 Spray Nozzle (0,1 F 110) Spring 4,6 x 18 x 1338 mm Stacking Aid DOMINO DSH Stacking Aid DOMINO DSW Stacking Aid TRIO DW 20 Stacking Aid TRIO DW 20 Stacking Aid TRIO DW 20 Stacking Device DOMINO, galv. Stacking Device DOMINO, galv. Stacking Device GRIDFLEX, galv. Stacking Device GRIDFLEX, galv. Stacking Device MAXIMO, galv. Stacking Device MAXIMO, galv. Stacking Device MAXIMO, galv. Stacking Device MX Stacking Device TRIO, galv. Stacking Frame ST 100, galv. Stair Guardrail UAG Stair Guardrail UAH Stair Guardrail UZG 250/150 Stair Step UAR 100 Stair Step UAR 125 Stair Stringer UA 250/200 Stair Stringer UA 250/200 Stair Stringer UZS 250/150 Staircase UAS 64 x 250/200, Alu Staircase UAS 64 x 300/200, Alu Staircase UAS 75 x 150/100, Alu Staircase UAS 75 x 150/50 T, Alu Staircase UAS 75 x 150/50, Alu Staircase UAS 75 x 250/200, Alu Staircase UAS 75 x 300/200, Alu Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Element GFP 200 x 100 Standard UVR 100 Standard UVR 100 Standard UVR 150 Standard UVR 150 Standard UVR 200 Standard UVR 200 Standard UVR 300 Standard UVR 300 Standard UVR 300 Public Standard UVR 400 Standard UVR 400
Plywood, SystemIndependent Accessories
027210 027210 102109 024950 024960 024970 024980 024990 024550 030440 100301 100301 116039 110477 109630 019800 111665 112816 025730 031530 750040 066093 066099 750303 750303 750303 066094 066094 110939 110939 115058 115058 115058 113019 023390 019910 100742 100830 108189 109198 114179 109219 114731 107448 100737 100738 111103 111087 111095 111117 111124 017020 017020 017020 017020 110038 101306 101306 102860 102860 100009 100009 100012 100012 107930 100013 100013
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 103943 010440 010420 100778 065128 065129 065127 101934 108856 101927 108855 101935 101936 101937 101940 101928 101929 101930 101931 023030 023040 023050 023067 105978 023060 105953 023068 023069 023071 023072 023061 023062 023064 023065 023081 023080 023078 023079 023074 023075 023077 023076 065039 110406 065040 114496 114503 114509 107820 034360 034380 034350 101856 065104 101857 065110 101859 065116 101861 065122 107162 106582 106583 102031 102031 035500 035500 618
Steel Waler Universal SRU U-140 l = 4.97 m Steel Waler VSRZ-24 U-100 l = 1.20/12 Steel Waler VSRZ-24 U-100 l = 2.45/12 Stiffening Board, 420 x 400 mm Stiffening Panel ASP 60,0 x 125,0 cm Stiffening Panel ASP 60,0 x 150,0 cm Stiffening Panel ASP 87,0 x 74,5 cm Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO AT 125 x 5 Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO AT 250 x 5 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 Stopend Panel TR 120 x 24 Stopend Panel TR 270 x 24 Stopend Panel TR/4 330 x 24 Stopend Panel TRIO AT 120 x 3 Stopend Panel TRIO AT 120 x 5 Stopend Panel TRIO AT 270 x 3 Stopend Panel TRIO AT 270 x 5 Stopend Panel TRIO MT 120 x 20 Stopend Panel TRIO MT 120 x 24/25 Stopend Panel TRIO MT 120 x 30 Stopend Panel TRIO MT 120 x 35/36 Stopend Panel TRIO MT 270 x 20 Stopend Panel TRIO MT 270 x 24/25 Stopend Panel TRIO MT 270 x 30 Stopend Panel TRIO MT 270 x 35/36 Stopend Panel TRIO MTF 120 x 20 Stopend Panel TRIO MTF 120 x 24/25 Stopend Panel TRIO MTF 120 x 30 Stopend Panel TRIO MTF 120 x 35/36 Stopend Panel TRIO MTF 270 x 20 Stopend Panel TRIO MTF 270 x 24/25 Stopend Panel TRIO MTF 270 x 30 Stopend Panel TRIO MTF 270 x 35/36 Stopend Sleeve DW 15 Stopend Tie-2 DSA Stopend Trestle Stopper MX 50 MF Stopper MX 50 OF Stopper MX 84 MF Strap MPB 24 Striking Fillet HSL 90 Striking Fillet HSL120 Striking Fillet HSL150 Striking Strip WD 20, 70-250/21 Striking Strip WD 20, 70/21 Striking Strip WD 24, 70-250/21 Striking Strip WD 24, 70/21 Striking Strip WD 25, 70-250/21 Striking Strip WD 25, 70/21 Striking Strip WD 30, 70-250/21 Striking Strip WD 30, 70/21 Stringer Frame UZF 150 Stringer Frame UZF 200 Stringer Frame UZF 250 Stripping Cart ASW 465, compl. Stripping Cart ASW 465, compl. Stripping Cart, Alu Stripping Cart, Alu
494 134 134 331 239 239 239 102 102 98 98 102 102 102 102 98 98 98 98 55 48 43 56 56 51 51 56 56 56 56 50 50 50 50 56 56 56 56 51 51 51 51 526 106 527 34 34 34 355 119 117 114 239 239 239 239 239 239 239 239 451 451 451 309 326 309 326
051060 051150 071291 114619 071364 026624 057050 102400 102400 017010 017010 017010 017010 017010 017010 017000 017000 112498
Strongback CB 270 Strongback CB 380 Structural Calculation for Approval Stud Spanner MAXIMO Supervisor Support Extension 300 FB-2 Suspension Tube Vario 53 Swivel Coupling DK 38/48, galv. Swivel Coupling DK 38/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 60/48, galv. Swivel Coupling DK 60/48, galv. Swivel Head SRU
424 424 598 35 598 401 147 481 577 188 371 395 430 481 577 481 577 332
710293 710702 710290 061052 108108 112782 112783 072700 072710 100956 100954 110422 028710 099540 098217 107007 115350 051260 051270 051270 051250 051250 100908 101621 027540 027230 110595 061310 028590 028590 028590 115385 115385 115427 115427 030860 030860 030860 030860 030870 030870 030870 030840 030840 030840 030190 110612 030150
T-Head Bolt M14 x 63/75, galv. 486 T-Head Bolt M14 x 75/87, galv. 486 T-Head Bolt M14 x 98/110, galv. 486 Table Connector STV 304 Table Lift Truck PTL 1250 335 Table Module SRU 200/215 x 500 332 Table Module SRU 200/265 x 500 332 Table Module VT 200/215 x 400 330 Table Module VT 200/215 x 500 330 Table Swivel Head, Lower Part 331 Table Swivel Head, Middle Part 331 Table Swivel Head, Upper Part-2 331 Table Trolley 2 t, l = 2.00 m 337 Template f. RUNDFLEX A250, I240, A128, I123 163 Template for RUNDFLEX A85, I72 163 Tension Anchor Connector CB 426 Tension and Compression Brace MX 29 Tension Belt Connector CB 426 Tension Belt Connector Wall M24 427 Tension Belt Connector Wall M24 405 Tension Belt l = 5.70 m, 25 kN 427 Tension Belt l = 5.70 m, 25 kN 404 Tension Coupler Ø 48,3 mm 482 Tension Relase Plate SB DW 26 195 Tension Rod with Nut 100/M 30 193 Tension Rod with Nut 135/M 30 193 Tension Sleeve GFO 314 Tension Sleeve SAO 305 Tension Strap 16-25, galv. 323 Tension Strap 16-25, galv. 368 Tension Strap 16-25, galv. 376 Tension Strap Rail GF 125 316 Tension Strap Rail GF 125 541 Tension Strap Rail GF 92 316 Tension Strap Rail GF 92 541 Threaded Anchor Plate DW 20 191 Threaded Anchor Plate DW 20 220 Threaded Anchor Plate DW 20 433 Threaded Anchor Plate DW 20 408 Threaded Anchor Plate DW 26 193 Threaded Anchor Plate DW 26 222 Threaded Anchor Plate DW 26 198 Threaded Plate DW 15 215 Threaded Plate DW 15 189 Threaded Plate DW 15 434 Three Wingnut DW 15, galv. 214 Tie Load Gauge 160 kN 223 Tie Load B 15 l = 0.30 m 212
619
Formwork Girders
141 498 323 361 351 62 342 342 342 343
Wall Formwork
Universal Coupling UK 70 Universal Coupling UK 70 Universal Tripod, galv. Universal Tripod, galv. Universal Tripod, galv. Universal Waler 245 UZ Beam Bracket 40 UZ Beam Width Adjustment Bar 129 UZ Beam Width Adjustment Bar 80 UZ Beam Yoke Waler 100
Column Formwork
103737 103737 028000 028000 028000 023920 065056 065065 065057 065058
Slab Formwork
469 469 469 469 84 378 462 378 462 378 462 378 462 462 107 124 67 88 549 549 549 548 404 308 257 314 531 303 303 270 63 31 363 392 265 563 137 563 137 563 137 563 563 563 563 563 482 152 152 152 152 152 314 307 576
Shoring Systems
Toeboard Wood UPT-2 200 Toeboard Wood UPT-2 250 Toeboard Wood UPT-2 300 Toeboard Wood UPT-2 400 Tool Box TRH Top Standard UVH 100 Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 200 Top Standard UVH 250 Top Standard UVH 250 Top Standard UVH 50 Top Tie Bracket DAH Top Tie Bracket HSAH, galv. Top Tie Bracket-2 AH, galv. Top Tie TRH Torx for Centrepivot Ø 60 mm Torx for Pre-Cutter Ø 60 mm Torx for Reverse Plate Ø 60 mm Torx for Reverse Plate/Pre-Cutter Ø 40 mm Transportation Fork FB, galv. Transportation Fork SUG, galv. Transportation Wheel QUATTRO Traverse GFT Trestle P 80 Triangular Frame SDR 150 x 75 Triangular Frame SDR 75 x 75 TRIO Ladder connection TRIO Stripping Bar TRIO Stripping Bar Tripod PEP 10 Trolley HD TRS clamp DW 15, galv. TSS-Torx 6 x 40, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 60, ZKS, galv. TSS-Torx 6 x 60, ZKS, galv. TSS-Torx 6 x 80, galv. TSS-Torx 6 x 80, galv. TSS-Torx 8 x 38, galv. TSS-Torx 8 x 44, galv. TSS-Torx 8 x 58, galv. TSS-Torx 8 x 78, galv. Tube Connector Ø 48,3 mm Tunnel Frame Wale RKR U 160 Tunnel Frame Wale RKR U 180 Tunnel Frame Wale RKR U100 Tunnel Frame Wale RKR U120 Tunnel Frame Wale RKR U140 Turnbuckle 3.0 kN, M 12 Turnbuckle 3.0 kN, M 12 Turnbuckle 3.0 kN, M 12
Climbing Systems
108114 108117 108120 108204 104032 100000 100000 100003 100003 100005 100005 100007 100007 101309 066086 034610 023630 106087 105346 105347 105327 105367 026646 061520 105791 110045 065051 061021 061022 103362 112588 112588 107152 022021 103716 024540 024470 024470 110272 110272 024690 024690 103444 104892 104647 103443 100909 022340 022350 022310 022320 022330 065074 065074 065074
Scaffolding, Stairs, Working Platforms
405 434 527 212 405 434 441 527 219 214 212 188 212 283 188 212 212 212 212 212 212 212 212 212 212 188 434 219 219 219 190 219 193 221 193 221 221 193 221 198 217 551 34 551 88 217 550 220 551 88 245 498 142 283 214 351 351 122 122 122 469 469 469 469 469 469 469
Bridge- and Tunnel Formwork
Tie Load B 15 l = 0.30 m Tie Load B 15 l = 0.30 m Tie Load B 15 l = 0.30 m Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 20 Spec. Length Tie Rod Cylinder Yoke SW, galv. Tie Rod DW 15 l = 0,50 m Tie Rod DW 15 l = 0,50 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.20 m Tie Rod DW 15 l = 1.50 m Tie Rod DW 15 l = 1.70 m Tie Rod DW 15 l = 2.00 m Tie Rod DW 15 l = 2.50 m Tie Rod DW 15 l = 3.00 m Tie Rod DW 15 l = 3.50 m Tie Rod DW 15 l = 6.00 m Tie Rod DW 15 Spec. Length Tie Rod DW 15 Spec. Length Tie Rod DW 15 Spec. Length Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m Tie Rod DW 20 l = 6.00 m Tie Rod DW 20 Spec. Length Tie Rod DW 20 Spec. Length Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 l = 6.00m Tie Rod DW 26 Spec. Length Tie Rod DW 26 Spec. Length Tie Rod DW 26 Spec. Length Tie Rod Spanner DW 15 Tie Rod Spanner DW 15 Tie Rod Spanner MX Tie Rod Spanner MX Tie Rod Spanner TRH SW 22 Tie Rod Wrench 15, galv. Tie Rod Wrench 15, galv. Tie Rod Wrench 20, galv. Tie Rod Wrench 20, galv. Tie TRH 15 - 30 / 99 Tie Yoke DW 15 Tie Yoke Head SRU Tie Yoke SKZ Tie Yoke SKZ Tie Yoke SRU Tilting Base MKF Tilting Forkhead MKK Timber Holder HSKH 22, galv. Timber Holder SKH 14, galv. Timber Strut Coupling HSRB Toeboard Steel UPY 104 Toeboard Steel UPY 150 Toeboard Steel UPY 200 Toeboard Steel UPY 250 Toeboard Steel UPY 300 Toeboard Steel UPY 72 Toeboard Wood UPT-2 150
Plywood, SystemIndependent Accessories
030150 030150 030150 030740 030740 030740 030740 030740 030745 022030 030005 030005 030010 030010 030480 030480 030490 030170 030020 030180 030710 030720 030730 030160 030030 030030 030030 030640 030641 030680 030700 030700 030645 030645 030646 030646 030690 030340 030340 030340 108129 108129 114290 114290 108719 031070 031070 031050 031050 054480 037150 110756 024210 024210 110755 027296 027297 034620 034650 034640 110076 110160 110176 110208 110211 110526 108068
Service
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Alphabetical Index 031580 031590 031600 102945 102825 013020 013030 013080 101471 101470 101469 101467 101465 101411 101410 101409 101408 101407 101406 101405 101255 101256 101257 101258 101259 101260 101261 101248 101249 101250 101251 101252 101253 101254 101241 101242 101243 101244 101245 101246 101247 065105 065111 065117 065123
V-Tie Holder DW 15 V-Tie Holder DW 20 V-Tie Holder DW 26 VARIO Alignment Clamp VRS VARIO Coupling Concrete Finish VKS 99 VARIO Coupling VKZ 147 VARIO Coupling VKZ 211 VARIO Coupling VKZ Spec. Length VARIO Internal Edge S 75/75 x 240 VARIO Internal Edge S 75/75 x 300 VARIO Internal Edge S 75/75 x 360 VARIO Internal Edge S 75/75 x 480 VARIO Internal Edge S 75/75 x 600 VARIO Standard Panel S 100 x 240 VARIO Standard Panel S 100 x 300 VARIO Standard Panel S 100 x 360 VARIO Standard Panel S 100 x 420 VARIO Standard Panel S 100 x 480 VARIO Standard Panel S 100 x 540 VARIO Standard Panel S 100 x 600 VARIO Standard Panel S 125 x 240 VARIO Standard Panel S 125 x 300 VARIO Standard Panel S 125 x 360 VARIO Standard Panel S 125 x 420 VARIO Standard Panel S 125 x 480 VARIO Standard Panel S 125 x 540 VARIO Standard Panel S 125 x 600 VARIO Standard Panel S 187,5 x 240 VARIO Standard Panel S 187,5 x 300 VARIO Standard Panel S 187,5 x 360 VARIO Standard Panel S 187,5 x 420 VARIO Standard Panel S 187,5 x 480 VARIO Standard Panel S 187,5 x 540 VARIO Standard Panel S 187,5 x 600 VARIO Standard Panel S 250 x 240 VARIO Standard Panel S 250 x 300 VARIO Standard Panel S 250 x 360 VARIO Standard Panel S 250 x 420 VARIO Standard Panel S 250 x 480 VARIO Standard Panel S 250 x 540 VARIO Standard Panel S 250 x 600 Vertical Reveal WD 20, 193.5 cm Vertical Reveal WD 24, 193.5 cm Vertical Reveal WD 25, 193.5 cm Vertical Reveal WD 30, 193.5 cm
190 192 194 141 141 139 139 139 132 132 132 132 132 131 131 131 131 131 131 131 130 130 130 130 130 130 130 129 129 129 129 129 129 129 128 128 128 128 128 128 128 238 238 238 238
023551 023551 021640 025760 110059 115189 023930 065046 065045 065076 110238 061051 100697 100698 100696 026531 026990 111866 107008 101964 066048
Waler 85 Waler 85 Waler Bolt for RUNDFLEX, galv. Waler Connector SB-A, B, C Waler Fixation U100-U120 Waler on Staircase UAS 75 Waler Stop Wall Clamp 105 Wall Clamp 55 Wall Clamp 75 Wall Holder GFW Wall Holder SWH-2 Wall Insert UFI 14/100 Wall Insert UFI 14/135 Wall Insert UFI 14/70 Wall Scaffold Hinge ASG Wall Scaffold Hinge FB Wall Scaffold Hinge SB double Wall Tension Anchor Wall Thickness Comp. DWD 125 x 10 Wall Thickness Comp. DWD 125 x 5
61 28 162 182 426 447 62 528 528 528 313 303 480 480 480 415 406 197 426 101 101
620
101986 066030 066068 114142 114142 114212 114212 114191 114191 114181 114181 114394 114842 114826 114846 023990 023995 023282 023292 023182 023192 054435 054391 054401 023281 023291 023181 023191 054395 054405 100091 100093 102951 102954 102957 100088 710880 780702 725574 711074 706454 710874 780354 750350 710886 113348 113349 113350 113347 710139 031150 066081 028060 028060 028060 024250 024250 024250 024250 024240 024240 024590 031300 010400 022460 012300 010500
Wall Thickness Comp. DWD 250 x 10 Wall Thickness Comp. DWD 250 x 5 Wall Thickness Comp. DWD 75 x 5 Wall Thickness Comp. MX 120 x 10, Alu Wall Thickness Comp. MX 120 x 10, Alu Wall Thickness Comp. MX 120 x 4 Wall Thickness Comp. MX 120 x 4 Wall Thickness Comp. MX 120 x 5 Wall Thickness Comp. MX 120 x 5 Wall Thickness Comp. MX 120 x 6 Wall Thickness Comp. MX 120 x 6 Wall Thickness Comp. MX 330 x 10, Alu Wall Thickness Comp. MX 330 x 4 Wall Thickness Comp. MX 330 x 5 Wall Thickness Comp. MX 330 x 6 Wall Thickness Comp. WDA 120 x 10, Alu Wall Thickness Comp. WDA 270 x 10, Alu Wall Thickness Comp. WDA-2 120 x 5 Wall Thickness Comp. WDA-2 120 x 6 Wall Thickness Comp. WDA-2 270 x 5 Wall Thickness Comp. WDA-2 270 x 6 Wall Thickness Comp. WDA/4 330 x 10, Alu Wall Thickness Comp. WDA/4-2 330 x 5 Wall Thickness Comp. WDA/4-2 330 x 6 Wall Thickness Comp. WDAS 120 x 5, Alu Wall Thickness Comp. WDAS 120 x 6, Alu Wall Thickness Comp. WDAS 270 x 5, Alu Wall Thickness Comp. WDAS 270 x 6, Alu Wall Thickness Comp. WDAS/4 330 x 5, Alu Wall Thickness Comp. WDAS/4 330 x 6, Alu Wall Tie UWT 110 Wall Tie UWT 140 Wall Tie UWT 170 Wall Tie UWT 220 Wall Tie UWT 270 Wall Tie UWT 45 Washer DIN 434 18, galv. Washer ISO 7089 200 HV, A 12, galv. Washer ISO 7089 200 HV, A 14, galv. Washer ISO 7089 200 HV, A 16, galv. Washer ISO 7089 200 HV, A 20, galv. Washer ISO 7089 200 HV, A 24, galv. Washer ISO 7089 200 HV, A 8, galv. Washer ISO 7093-1 200 HV, A 12, galv. Washer ISO 7093-1 200 HV, A 16, galv. Washer ISO 7094 100 HV A 12, galv. Washer ISO 7094 100 HV A 16, galv. Washer ISO 7094 100 HV A 20, galv. Washer ISO 7094 100 HV A 8, galv. Washer R11 DIN 440, galv. Waterstop Centrepiece DW 15 Wedge Clamp DKS Wedge Headpiece, compl. Wedge Headpiece, compl. Wedge Headpiece, compl. Wedge K, galv. Wedge K, galv. Wedge K, galv. Wedge K, galv. Wedge KZ, galv. Wedge KZ, galv. Wedge Lowering Device 420 kN Weld on Anchor DW 15 Welding Unit for KRZ Welding Unit for RKR Welding Unit for SSRZ Welding Unit for VSRZ
96 96 103 23 19 23 19 23 19 23 19 14 14 14 14 54 49 54 54 49 49 43 43 43 61 61 60 60 60 60 480 480 480 480 480 480 562 561 561 561 561 561 561 561 561 561 561 561 561 562 215 104 145 206 285 143 182 206 285 143 283 388 215 134 152 282 134
4762 4762 4762 4762 4762
M12 x 60-8.8, galv. M12 x 60-8.8, galv. M12 x 90-8.8, galv. M12 x 90-8.8, galv. M30 x 70-8.8, galv.
Formwork Girders Column Formwork Slab Formwork
ISO ISO ISO ISO ISO
Shoring Systems
457 559 457 559 559
Bolt Bolt Bolt Bolt Bolt
Climbing Systems
Zyl. Zyl. Zyl. Zyl. Zyl.
Scaffolding, Stairs, Working Platforms
104278 104278 104528 104528 113007
Bridge- and Tunnel Formwork
134 350 387 213 121 527 213 189 284 191 219 33 212 89 265 441 531
Plywood, SystemIndependent Accessories
Welding Unit for VSRZ/12 Wing Nut Spanner HD Wing Nut Spanner HD Wingnut Counterplate DW 15, galv. Wingnut Counterplate DW 15, galv. Wingnut Counterplate DW 15, galv. Wingnut DW 15, galv. Wingnut DW 15, galv. Wingnut DW 15, galv. Wingnut DW 20, galv. Wingnut DW 20, galv. Wingnut MX Wingnut Pivot Plate DW 15, galv. Wingnut Pivot Plate DW 15, galv. Wingnut Pivot Plate DW 15, galv. Wingnut Pivot Plate DW 15, galv. Wood Handle L = 1180 mm
621
Service
010490 022027 022027 030110 030110 030110 030100 030100 030100 030990 030990 112386 030370 030370 030370 030370 065026
Wall Formwork
Alphabetical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 010030 010050 010050 010060 010070 010080 010090 010120 010150 010180 010190 010200 010270 010350 010400 010420 010440 010490 010500 010600 010610 012040 012050 012080 012090 012150 012160 012300 013010 013020 013030 013080 013130 013140 013180 013210 013220 013230 013240 017000 017000 017010 017010 017010 017010 017010 017010 017020 017020 017020 017020 017030 017030 017040 017040 017040 018050 018050 018060 018060 018060 018060 018060 018060 018060 018060 018060 622
Steel Waler SRZ U-100 l = 1.20m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 2,45 m Steel Waler SRZ U-100 l = 1.825m Steel Waler SRZ U-100 l = 1.95m Steel Waler SRZ U-100 Spec. Length Steel Waler SRZ U-140 Spec. Length Steel Waler SRZ U-100 l = 2.95m Steel Waler SRZ U-120 Spec. Length Cross Waler KRZ U-100 Spec. Length Cross Waler KRZ U-140, Spec. Length Internal Corner Waler IRZ 75/75 Cross Waler KRZ U-120 Spec. Length Additional Row of SRZ Slots Welding Unit for KRZ Steel Waler VSRZ-24 U-100 l = 2.45/12 Steel Waler VSRZ-24 U-100 l = 1.20/12 Welding Unit for VSRZ/12 Welding Unit for VSRZ Steel Waler SRZ U-100 l = 0.95m Steel Waler SRZ U-100 l = 1.45m Column Waler SSRZ-U120, spec. length Steel Waler SVRZ U-100 l = 1.20 m Steel Waler SSRZ U-100. Spec. Length Column Waler SSRZ-U140, spec. length Steel Waler SSRZ-24 U-100 l = 0.97/0.85 m Steel Waler SSRZ-24 U-100 l = 1,13/1,01 m Welding Unit for SSRZ Coupling VKZ 99 VARIO Coupling VKZ 147 VARIO Coupling VKZ 211 VARIO Coupling VKZ Spec. Length Corner Coupling EKZ 76/76 Corner Coupling EKZ 95/43 Corner Coupling EKZ Spec. Length Articulated Coupling GKZ 76/76 Articulated Coupling GKZ 60/60 Articulated Coupling GKZ Spec. Length Bulkhead Tie Swivel Coupling DK 60/48, galv. Swivel Coupling DK 60/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Swivel Coupling DK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Standard Coupler NK 48/48, galv. Double Coupler NK 60/48, galv. Double Coupler NK 60/48, galv. Screw-On Coupler AK 48, galv. Screw-On Coupler AK 48, galv. Screw-On Coupler AK 48, galv. Bolt Ø 16 x 65/86, galv. Bolt Ø 16 x 65/86, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv. Cotter Pin 4/1, galv.
133 133 186 133 133 133 133 133 133 134 134 134 134 133 134 134 134 134 134 133 133 282 282 282 282 282 282 282 139 139 139 139 140 140 140 140 140 140 142 481 577 188 371 395 430 481 577 370 395 481 577 481 577 430 481 577 208 566 142 208 256 323 355 353 405 500 569
018280 018280 018280 018290 018290 018300 018300 018310 018320 018330 018350 019780 019780 019790 019790 019800 019810 019900 019910 019920 019930 019940 019950 019950 020310 020320 020330 020510 020520 020600 020620 020820 020830 020840 020850 020860 020870 020880 020890 021110 021120 021130 021140 021150 021160 021240 021250 021260 021270 021280 021290 021400 021410 021420 021430 021610 021620 021630 021640 021770 021790 021790 021790 021800 021810 021820 021830
Double Head Nail l = 65 mm Double Head Nail l = 65 mm Double Head Nail l = 65 mm Framing Clip, galv. Framing Clip, galv. Cross Strap, galv. Cross Strap, galv. Beam Connector, galv. Bolt ISO 4016 M16 x 140-4.6 MU, galv. Bolt ISO 4016 M12 x 140-4.6 MU, galv. Bolt ISO 4016 M16 x 160-4.6 MU, galv. Heavy Duty Adj. Base Plate TR 38-70/50 Heavy Duty Adj. Base Plate TR 38-70/50 Head Spindle TR 38 -70/50, galv. Head Spindle TR 38 -70/50, galv. Spindle Safety Strap ST 100, galv. Connector ST 100, galv. Base-Head Frame ST 100, galv. Stacking Frame ST 100, galv. End Waler ST 100, galv. End Frame ST 100, galv. Diagonal Strut ST 100, galv. Cross Forkhead TR 38-70/50 Cross Forkhead TR 38-70/50 Platform Beam BR U140 Platform Beam BR U100 Folding Bearing Plate 25 Platform Beam BR U120 Platform Beam BR U160 Gravity Pivot Plate BR Spacer for Platform Beam BR Outside Panel A 85 x 120 Inside Panel I 72 x 120 Outside Panel A 85 x 240 Inside Panel I 72 x 240 Outside Panel A 85 x 300 Inside Panel I 72 x 300 Outside Panel A 85 x 360 Inside Panel I 72 x 360 Articulated Waler GRV 90 Articulated Waler GRV 75 Articulated Waler GRV 60 Articulated Waler GRV 30 Articulated Spindle Waler GSRV 65-90 Hook Spanner HKS for GRV Adjusting Bolt STS 260, galv. Adjusting Bolt STS 360, galv. Half Round Washer HRS, galv. GRV Bearing Block, left GRV Bearing Block, right GRV Spindle Connector Outside Panel A 250 x 300 Inside Panel I 240 x 300 Outside Panel A 128 x 300 Inside Panel I 123 x 300 Adjusting Spindle 210, galv. Adjusting Spindle 500, galv. Distribution Waler Waler Bolt for RUNDFLEX, galv. Selftapping Screw 6,3 x 32, galv. Ratchet Spanner SW 24 "Combi" Ratchet Spanner SW 24 "Combi" Ratchet Spanner SW 24 "Combi" Outside Panel A 250 x 60 Inside Panel I 240 x 60 Outside Panel A 250 x 120 Inside Panel I 240 x 120
240 325 564 325 574 368 376 574 559 559 559 374 368 375 367 368 369 366 366 369 369 366 375 367 438 438 440 438 438 439 439 160 160 160 160 160 160 160 160 166 166 166 166 166 167 167 167 167 168 168 168 156 157 158 159 161 161 162 162 564 163 516 554 156 157 156 157
623
Formwork Girders Wall Formwork Column Formwork Slab Formwork
46 60 46 60 45 60 47 60 52 61 52 61 52 61 53 61 52 61 53 61 53 61 56 57 57 57 57 31 66 66 107 66 123 55 48 43 51 50 50 50 50 56 56 56 56 56 51 51 51 51 56 56 56 56 49 60 49 60 49 48 60 54 61 54 61 54 53
Shoring Systems
Panel TR 270 x 60 Panel TRIO Structure TS 270 x 60 Panel TR 270 x 30 Panel TRIO Structure TS 270 x 30 Panel TR 270 x 240 Panel TRIO Structure TS 270 x 240 Inside Corner TE 270-2 Corner TRIO Structure TSE 270 Panel TR 120 x 120 Panel TRIO Structure TS 120 x 120 Panel TR 120 x 90 Panel TRIO Structure TS 120 x 90 Panel TR 120 x7 2 Panel TRIO Structure TS 120 x 72 Multi Panel TRM 120 x 72 Panel TRIO Structure TSM 120 x 72 Panel TR 120 x 60 Panel TRIO Structure TS 120 x 60 Panel TR 120 x 30 Panel TRIO Structure TS 120 x 30 Inside Corner TE 120-2 Corner TRIO Structure TSE 120 Panel TR 60 x 90 Panel TR 60 x 72 Panel TR 60 x 60 Panel TR 60 x 30 Inside Corner TE 60-2 Concreting Platform TRIO 120 x 270 Concreting Platform TRIO 120 x 270 Foundation Tie Clamp TRIO Perforated Foundation Tie, 25 m Perforated Foundation Tie, 25 m Perforated Foundation Tie, 25 m Stopend Panel TR 120 x 24 Stopend Panel TR 270 x 24 Stopend Panel TR/4 330 x 24 Stopend Panel TRIO AT 270 x 3 Stopend Panel TRIO MT 270 x 20 Stopend Panel TRIO MT 270 x 24/25 Stopend Panel TRIO MT 270 x 30 Stopend Panel TRIO MT 270 x 35/36 Stopend Panel TRIO AT 120 x 3 Stopend Panel TRIO MT 120 x 20 Stopend Panel TRIO MT 120 x 24/25 Stopend Panel TRIO MT 120 x 30 Stopend Panel TRIO MT 120 x 35/36 Stopend Panel TRIO MTF 270 x 20 Stopend Panel TRIO MTF 270 x 24/25 Stopend Panel TRIO MTF 270 x 35/36 Stopend Panel TRIO MTF 270 x 30 Stopend Panel TRIO MTF 120 x 30 Stopend Panel TRIO MTF 120 x 35/36 Stopend Panel TRIO MTF 120 x 24/25 Stopend Panel TRIO MTF 120 x 20 Filler Plate LA 270 x 36 Wall Thickness Comp. WDAS 270 x 5, Alu Wall Thickness Comp. WDA-2 270 x 5 Wall Thickness Comp. WDAS 270 x 6, Alu Wall Thickness Comp. WDA-2 270 x 6 Articulated Corner TGE 270 Artic. Corner TRIO Structure TSGE 270 Filler Plate LA 120 x 36 Wall Thickness Comp. WDAS 120 x 5, Alu Wall Thickness Comp. WDA-2 120 x 5 Wall Thickness Comp. WDAS 120 x 6, Alu Wall Thickness Comp. WDA-2 120 x 6 Articulated Corner TGE120
Climbing Systems
022550 022551 022560 022561 022570 022571 022580 022581 022600 022601 022610 022611 022620 022621 022630 022631 022640 022641 022650 022651 022660 022661 022790 022800 022810 022820 022840 022950 022950 023010 023020 023020 023020 023030 023040 023050 023060 023061 023062 023064 023065 023067 023068 023069 023071 023072 023074 023075 023076 023077 023078 023079 023080 023081 023170 023181 023182 023191 023192 023200 023201 023270 023281 023282 023291 023292 023300
Scaffolding, Stairs, Working Platforms
156 157 156 157 158 159 158 159 158 159 158 159 146 163 163 146 387 386 386 386 387 391 391 391 392 388 208 388 390 387 388 386 392 389 389 390 392 392 350 387 214 166 569 167 500 569 167 560 152 152 152 152 152 152 153 153 152 152 45 60 51 45 60 46 60 47 60
Bridge- and Tunnel Formwork
Outside Panel A 250 x 240 Inside Panel I 240 x 240 Outside Panel A 250 x 360 Inside Panel I 240 x 360 Outside Panel A 128 x 60 Inside Panel I 123 x 60 Outside Panel A 128 x 120 Inside Panel I 123 x 120 Outside Panel A 128 x 240 Inside Panel I 123 x 240 Outside Panel A 128 x 360 Inside Panel I 123 x 360 Crane Eye 24, left Crane Eye 24, left Crane Eye 24, right Crane Eye 24, right Lowering Device HDA Prop Section HDS 270 Alu Prop Section HDS 90 Alu Prop Section HDS 30 Alu Head Spindle HDK45 Main Beam HDT 880 Main Beam HDT 440 Main Beam HDT 280 Double Anchor Tie Yoke HDD Centring Bolt HD M12, galv. Brace Connector HDR Brace Connector HDR Scaffold Bracket HD 75 Shear Pin HDA Base Adapter HD Coupling Section HD30 Trolley HD Compression Head HD Compression Brace Spindle HD Base Plate HD Centring Bar 40 x 20 x 400 mm Steel Beam Clamp IPB 300 - 1000 Wing Nut Spanner HD Wing Nut Spanner HD Tie Rod Cylinder Yoke SW, galv. Pin for GRB, galv. Pin for GRB, galv. Cotter Pin 5/1, galv. Cotter Pin 5/1, galv. Cotter Pin 5/1, galv. Nut ISO 4032 M24-8, galv. Nut ISO 4032 M24-8, galv. Tunnel Frame Wale RKR U100 Tunnel Frame Wale RKR U120 Tunnel Frame Wale RKR U140 Tunnel Frame Wale RKR U 160 Tunnel Frame Wale RKR U 180 Double Spindle with Wheel RKR Adjusting Spindle RKR, compl.. Corner Spindle RKR Double Spindle without Wheel RKR Welding Unit for RKR Panel TR 270 x 120 Panel TRIO Structure TS 270 x 120 Panel TR 120 x 240 Panel TR 270 x 90 Panel TRIO Structure TS 270 x 90 Panel TR 270 x 72 Panel TRIO Structure TS 270 x 72 Multi Panel TRM 270 x 72 Panel TRIO Structure TSM 270 x 72
Plywood, SystemIndependent Accessories
021840 021850 021880 021890 021900 021910 021920 021930 021940 021950 021960 021970 021980 021980 021990 021990 022003 022004 022005 022006 022007 022008 022009 022010 022011 022013 022016 022016 022017 022018 022019 022020 022021 022022 022023 022024 022025 022026 022027 022027 022030 022210 022210 022230 022230 022230 022250 022250 022310 022320 022330 022340 022350 022380 022400 022410 022440 022460 022510 022511 022514 022520 022521 022530 022531 022540 022541
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 023301 023390 023440 023440 023450 023460 023500 023500 023500 023500 023550 023551 023551 023560 023590 023630 023640 023640 023650 023650 023650 023660 023660 023660 023660 023670 023670 023680 023680 023690 023690 023800 023820 023820 023850 023860 023870 023880 023891 023900 023920 023930 023940 023950 023960 023971 023980 023990 023995 024000 024070 024070 024070 024080 024080 024090 024090 024140 024140 024180 024180 024210 024210 024220 024240 024240 024250 624
Artic. Corner TRIO Structure TSGE 120 Stacking Device TRIO, galv. Lifting Pin TRIO Lifting Pin TRIO Filler Support TPA 120 Filler Support TPA 270 Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Alignment Coupler BFD, galv. Compensation Waler TAR 85 Waler 85 Waler 85 Projection Waler TVR45/45 Scaffold Bracket TRG 100/112 Top Tie Bracket-2 AH, galv. Bulkhead Tie TS, galv. Bulkhead Tie TS, galv. Hook Tie DW 15 l = 400 mm, galv. Hook Tie DW 15 l = 400 mm, galv. Hook Tie DW 15 l = 400 mm, galv. Brace Connector TRIO, galv. Brace Connector TRIO, galv. Brace Connector TRIO, galv. Brace Connector TRIO, galv. Scaffold Bracket TRG 80 Scaffold Bracket TRG 80 Scaffold Bracket TRG 120 Scaffold Bracket TRG 120 Lifting Hook TRIO 1.5 t Lifting Hook TRIO 1.5 t Foundation Strap TRIO Hook Tie Head DW 15, galv. Hook Tie Head DW 15, galv. Panel Alu TRA 270 x 90 Multi Panel Alu TAM 270 x 72 Panel Alu TRA 270 x 60 Panel Alu TRA 270 x 30 Corner Alu TAE 270/2 Panel Alu TRA 90 x 120 Universal Waler 245 Waler Stop Alignment Coupler 38, galv. Panel Alu TRA 90 x 60 Panel Alu TRA 90 x 30 Corner Alu TAE 90/2 Multi Panel Alu TAM 90 x 72 Wall Thickness Comp. WDA 120 x 10, Alu Wall Thickness Comp. WDA 270 x 10, Alu Compensation Washer 16, yellow galv Hook Strap HB 24-100/120, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-100/120, galv. Hook Strap HB 24-140/160, galv. Hook Strap HB 24-140/160, galv. Nut ISO 4032 M 8-8, galv. Nut ISO 4032 M 8-8, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. F.H. Bolt DIN 603 M8 x 70 MU, galv. Compensation Washer 20, galv. Compensation Washer 20, galv. Tie Yoke SKZ Tie Yoke SKZ Coupling Compression Plate KDP Wedge KZ, galv. Wedge KZ, galv. Wedge K, galv.
61 267 68 267 55 50 27 61 161 266 61 61 28 62 65 67 28 62 63 89 28 29 63 207 266 31 65 31 65 68 267 67 63 28 57 58 58 58 59 59 62 62 161 59 59 60 60 54 49 499 136 282 440 136 440 136 560 136 565 187 499 142 283 143 143 283 143
024250 024250 024250 024260 024260 024270 024270 024310 024350 024360 024360 024380 024390 024410 024470 024470 024480 024480 024490 024500 024510 024520 024530 024540 024550 024590 024600 024630 024640 024690 024690 024880 024900 024910 024910 024920 024921 024922 024923 024950 024960 024970 024980 024990 025200 025210 025220 025230 025240 025250 025660 025660 025670 025670 025690 025700 025710 025720 025730 025740 025740 025740 025740 025750 025760 026200 026220
Wedge K, galv. Wedge K, galv. Wedge K, galv. Lag Screw DIN 571 8 x 80, galv. Lag Screw DIN 571 8 x 80, galv. Lag Screw DIN 571 8 x 60, galv. Lag Screw DIN 571 8 x 60, galv. Screwnail 70 mm, galv. Screwnail 90 mm, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN 603 M8 x 125 MU, galv. F.H. Bolt DIN 603 M8 x 160 MU, galv. F.H. Bolt DIN 603 M8 x 200 MU, galv. F.H. Bolt DIN 603 M8 x 250 MU, galv. TSS-Torx 6 x 60, galv. TSS-Torx 6 x 60, galv. Extension Splice 24-2 Extension Splice 24-2 Lag Screw DIN 571 8 x 100, galv. Lag Screw DIN 571 8 x 130, galv. Lag Screw DIN 571 8 x 140, galv. Lag Screw DIN 571 8 x 160, galv. Screwnail 40mm, galv. TSS-Torx 6 x 40, galv. Spax Screw TX 30 8 x 20, yellow galv. Wedge Lowering Device 420 kN Girder Claw HB U100-U120, galv. Fix Strap U100-120, galv. Quick Str. Hook Strap 24-100/140, galv. TSS-Torx 6 x 80, galv. TSS-Torx 6 x 80, galv. Hook Strap HB for VT, galv. Bolt ISO 4014 M20 x 80-8.8, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Bolt ISO 4014 M20 x 100-8.8, galv. Power-Screwdriver DSSE 642 Bit Holder for DSSE 642 Magnetic Holder for DSSE 642 Depth Chuck for DSSE 642 Spax Screw TX 30 6 x 100, yellow galv. Spax Screw TX 30 6 x 120, yellow galv. Spax Screw TX 30 6 x 140, yellow galv. Spax Screw TX 30 6 x 160, yellow galv. Spax Screw TX 30 6 x 180, yellow galv. Quick Release Corner SSE 1,0 m Quick Release Corner SSE 2,0 m Quick Release Corner SSE 3,0 m Quick Release Corner SSE 4,0 m Quick Release Corner SSE 5,0 m Quick Release Corner SSE Spec. Leng Hardware Box 80 x 120, galv. Hardware Box 80 x 120, galv. Hardware Box 80 x 120, painted Hardware Box 80 x 120, painted Brace Frame SB-A0 Brace Frame SB-A Brace Frame SB-B Brace Frame SB-C Spindle TR 60 x 9/43 Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Connector SB-A, B, C - MX/TR/D Guide Roller SB-A, B Waler Connector SB-A, B, C Bolt Ø 25 x 160, KG, galv. Bolt ISO 4014 M24 x 80-10.9, galv.
182 206 285 138 562 138 562 564 564 432 565 565 565 565 137 563 145 162 562 562 562 562 564 563 564 388 136 136 136 137 563 575 558 187 558 547 547 547 547 564 564 564 564 564 144 144 144 144 144 144 484 536 484 536 180 180 181 181 183 182 107 64 32 183 182 567 558
625
Formwork Girders Wall Formwork Column Formwork Slab Formwork
370 394 430 480 576 435 408 417 515 406 417 427 442 558 215 199 403 486 415 415 399 401 400 402 401 402 401 406 403 409 416 409 403 409 404 70 404 398 399 400 406 176 147 286 176 147 286 163 147 285 208 565 438 553 553 188 552 188 552 199 438 410 418 553 188 552 193
Shoring Systems
Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Anchor Positioning Stud M 24, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Bolt ISO 4014 M24 x 70-10.9, galv. Anchor Positioning Stud f. AH-DW 15, Anchor Positioning Stud M36, galv. Safety Net 6.0 x 2.0 m Safety Net 6.0 x 2.0 m Wall Scaffold Hinge ASG Mounting Plate ASG Intermediate Platform FBZ 240 Support Extension 300 FB-2 Finishing Platform FBN-2/300 Corner Frame FBE Compression Strut FB-2 Guardrail Post FBP Finishing Platform Bracket FBN-2 Mounting Head FB Guardrail Extension FB Anchor Loop Anchor Loop Mounting Extension ASG for Loop Pipe Bracing Connector, galv. Loop Mounting Head-2 FB, galv. Transportation Fork FB, galv. Screw Plate DW 15/115, galv. Screw Plate DW 15/115, galv. Folding Platform FB 180-3/300 Folding Corner Platform FEB 180-3/300 Folding Bracket FB 180-3, compl. Wall Scaffold Hinge FB Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, right Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, left Corner Scaffold Bracket EGB 80, left Scaffold Bracket GB 80 Scaffold Bracket GB 80 Scaffold Bracket GB 80 Bolt Ø 16 x 42, galv. Bolt Ø 16 x 42, galv. Ratchet Lever SW 19 Ratchet Lever SW 19 Insert Socket SW 19 Spanner SW 80, for SB Spanner SW 80, for SB Spanner SW 46, for SB Spanner SW 46, for SB Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Allan Key SW 14, long Spanner SW 70, for SB Spanner SW 70, for SB Tension Rod with Nut 135/M 30
Climbing Systems
026419 026419 026419 026419 026419 026420 026420 026420 026420 026430 026430 026430 026430 026430 026440 026460 026530 026530 026531 026536 026622 026624 026625 026626 026627 026628 026631 026632 026635 026636 026636 026638 026644 026645 026646 026647 026647 026648 026649 026652 026990 027060 027060 027060 027070 027070 027070 027110 027110 027110 027170 027170 027180 027180 027200 027210 027210 027211 027211 027212 027212 027212 027212 027212 027213 027213 027230
Scaffolding, Stairs, Working Platforms
406 417 441 514 407 417 442 514 407 417 442 515 573 215 560 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 176 188 370 394 430 480 576 576 188 176 370 394 430 480 576 188 176 370 394 430 480 576 188 176
Bridge- and Tunnel Formwork
Anchor Sleeve M24 Anchor Sleeve M24 Anchor Sleeve M24 Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Cone for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Plug Ø 26 mm for Bolt Anchor Sleeve M24 Anchor Sleeve DW 15 Bolt ISO 4017 M24 x 50-10.9, galv. Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 1,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 2,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 3,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 4,0 m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaff. Tube Steel Ø 48,3 x 3,2, per m Scaffold Tube Alu Ø 48,3 x 4,0, per m Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Cutting Cost Scaffold Tube Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 6,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m Scaff. Tube Steel Ø 48,3 x 3,2, l = 5,0 m
Plywood, SystemIndependent Accessories
026230 026230 026230 026230 026240 026240 026240 026240 026250 026250 026250 026250 026250 026280 026290 026411 026411 026411 026411 026411 026411 026411 026412 026412 026412 026412 026412 026412 026412 026413 026413 026413 026413 026413 026413 026413 026414 026414 026414 026414 026414 026414 026414 026415 026415 026415 026415 026415 026415 026415 026416 026417 026417 026417 026417 026417 026417 026417 026418 026418 026418 026418 026418 026418 026418 026419 026419
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 027288 027289 027290 027291 027296 027297 027298 027299 027301 027302 027305 027310 027340 027480 027500 027510 027520 027530 027540 027590 027590 027650 027680 027680 027680 027680 027690 027690 027690 027690 027790 027890 027930 027930 027940 027940 027990 027990 028000 028000 028000 028010 028010 028010 028010 028010 028010 028010 028010 028020 028020 028020 028020 028020 028020 028020 028020 028030 028030 028030 028030 028030 028030 028050 028050 028050 028060 626
MULTIPROP MP 120 MULTIPROP MP 250 MULTIPROP MP 350 MULTIPROP MP 480 Tilting Base MKF Tilting Forkhead MKK Scaffold Tube Coupler MG-A/C Scaffold Tube Coupler MG-B/D Connector MPV-2 MULTIPROP Strap SRZ U100 - U140 MULTIPROP MP 625 Base MP 50 Bolt ISO 4016 M12 x 180-4.6 MU, galv. Anchor Plate SB - DW 26 Brace Frame SB 1 Brace Frame SB 2 Double Anchor Tie Yoke DSW Anchor Waler U140 l = 2,35 m Tension Rod with Nut 100/M 30 Hook Strap for SB-1, 2, galv. Hook Strap for SB-1, 2, galv. Anchor Waler U140 l = 0,55 m Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Connector SB-1,2 - MX/TR/D Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Bolt Ø 19 x 165, galv. Brace Clamp HL, galv. Crosshead 20/24, galv. Assembly Bar 24, galv. Assembly Bar 24, galv. Brace Clamp, galv. Brace Clamp, galv. Bolt Ø 14 x 107, galv. Bolt Ø 14 x 107, galv. Universal Tripod, galv. Universal Tripod, galv. Universal Tripod, galv. Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS I Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS II Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Push-Pull Prop RSS III Girder Headpiece GT 24, galv. Girder Headpiece GT 24, galv. Girder Headpiece GT 24, galv. Wedge Headpiece, compl.
348 348 348 348 351 351 351 351 352 352 348 350 559 195 183 184 189 196 193 184 145 195 185 106 64 32 107 64 181 566 324 322 324 553 323 362 322 565 323 361 351 202 87 249 278 295 271 260 288 203 175 250 279 296 271 260 288 203 250 296 271 260 288 144 206 284 145
028060 028060 028070 028070 028070 028080 028080 028100 028100 028100 028110 028110 028110 028110 028110 028110 028110 028120 028120 028120 028120 028120 028120 028210 028220 028330 028340 028350 028360 028370 028380 028390 028400 028460 028470 028480 028490 028590 028590 028590 028660 028670 028680 028710 028720 028790 028870 028890 028990 029270 029270 029280 029280 029390 029420 029430 029430 029440 029440 029440 029470 029470 029490 029540 029550 029550 029560
Wedge Headpiece, compl. Wedge Headpiece, compl. Girder Headpiece GT 24/A, galv. Girder Headpiece GT 24/A, galv. Girder Headpiece GT 24/A, galv. Connector Kicker/Push-Pull Prop, galv. Connector Kicker/Push-Pull Prop, galv. Base Plate for RS, compl. Base Plate for RS, compl. Base Plate for RS, compl. Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Kicker AV RSS III Push-Pull Prop RS I Push-Pull Prop RS II Frame MRK 90 Frame MRK 120 Frame MRK 150 Frame MRK 225 Frame MRK 296 Frame MRK 137,5 Frame MRK 62,5 Frame MRK 75 Frame MRK 201,5 Frame MRK 230 Frame MRK 237 Frame MRK 266 Tension Strap 16-25, galv. Tension Strap 16-25, galv. Tension Strap 16-25, galv. Clawhead 16/20 S, galv. Clawhead 16/20, galv. Crosshead 20/24 S, galv. Table Trolley 2 t, l = 2.00 m Attachment 100 for Striking Trolley Beam Waler UZR 190/150 Lowering Head 20/24, galv. Clawhead 24 S, galv. Push-Pull Prop RS 1000, galv. Advancing Screw M24, galv. Advancing Screw M24, galv. Anchor Positioning Plate M24, galv. Anchor Positioning Plate M24, galv. Anchor Positioning Plate M36, galv. Bolt ISO 4017 M30 x 70-8.8, galv. Bolt ISO 4017 M36 x 70-8.8, galv. Bolt ISO 4017 M36 x 70-8.8, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 20, galv. Lag Screw DIN 571 6 x 20, galv. Scaffold Mounting Ring M24, galv. Scaffold Mounting Ring M24, galv. Scaffold Mounting Ring M36, galv. Bolt ISO 4014 M30 x 130-10.9, galv. Bolt ISO 4014 M36 x 130-10.9, galv. Bolt ISO 4014 M36 x 130-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv.
206 285 144 206 284 205 389 202 315 307 204 250 279 296 272 261 288 205 251 297 272 261 289 202 202 348 348 348 349 349 348 348 348 349 349 349 349 323 368 376 322 322 322 337 338 344 321 322 203 435 408 435 408 199 559 199 559 199 435 562 433 407 198 558 198 558 433
627
Formwork Girders Wall Formwork Column Formwork Slab Formwork
441 193 221 245 222 188 212 212 193 221 198 213 191 220 191 219 219 219 193 221 193 221 222 222 219 221 190 219 212 212 212 212 405 434 441 527 219 575 190 219 219 575 192 220 215 189 434 191 220 433 408 193 222 198 197 194 221 194 221 191 219 554 583 590 554 583 590
Shoring Systems
Wingnut Pivot Plate DW 15, galv. Coupling Nut M 30/DW 26, galv. Counterplate DW 26, 120 x 120 x 20 Spherical Nut DW 15, galv. Pretension Jack for DW 15/20/26 Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.00 m Tie Rod DW 15 l = 1.20 m Cutting Cost Tie Rod DW 26 Cutting Cost Tie Rod DW 26 Cutting Cost Tie Rod DW 26 Hex. Nut DW 15 SW 30/50, weldable Hex. Nut DW 20 SW 36/60 Hex. Nut DW 20 SW 36/60 Hex. Nut DW 20 SW 36/110 Hex. Nut DW 20 SW 36/110 Tie Rod DW 20 l = 0.50 m Tie Rod DW 20 l = 1.00 m Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 0.50 m Tie Rod DW 26 l = 1.00 m Tie Rod DW 26 l = 1.00 m Adapter I for Pretension Jack Adapter III for Pretension Jack Tie Rod DW 20 l = 6.00 m Tie Rod DW 26 l = 6.00m Tie Rod DW 20 Spec. Length Tie Rod DW 20 Spec. Length Tie Rod DW 15 l = 2.50 m Tie Rod DW 15 l = 3.00 m Tie Rod DW 15 l = 3.50 m Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 15 spec. length Tie Rod B 20 Spec. Length Clamp Lock Cutting Cost Tie Rod DW 20/B 20 Cutting Cost Tie Rod DW 20/B 20 Cutting Cost Tie Rod DW 20/B 20 Spanner for Clamp Lock, galv. Counterplate DW 20, 120 x 120 x 20 Counterplate DW 20, 120 x 120 x 20 Threaded Plate DW 15 Threaded Plate DW 15 Threaded Plate DW 15 Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 20 Threaded Anchor Plate DW 26 Threaded Anchor Plate DW 26 Threaded Anchor Plate DW 26 Climbing Cone-2 M 36/DW 26, galv. Hex. Coupler DW 26 SW 46/80, weldable Hex. Coupler DW 26 SW 46/80, weldable Hex. Coupler DW 26 SW 46/150, weldable Hex. Coupler DW 26 SW 46/150, weldable Wingnut DW 20, galv. Wingnut DW 20, galv. Drill Bit Ø 35 mm Drill Bit Ø 35 mm Drill Bit Ø 35 mm Drill Bit Ø 20 mm Drill Bit Ø 20 mm Drill Bit Ø 20 mm
Climbing Systems
030370 030400 030420 030440 030460 030480 030480 030490 030500 030500 030500 030550 030580 030580 030590 030590 030640 030641 030645 030645 030646 030646 030663 030664 030680 030690 030700 030700 030710 030720 030730 030740 030740 030740 030740 030740 030745 030790 030800 030800 030800 030820 030830 030830 030840 030840 030840 030860 030860 030860 030860 030870 030870 030870 030940 030970 030970 030980 030980 030990 030990 031030 031030 031030 031040 031040 031040
Scaffolding, Stairs, Working Platforms
407 558 233 549 549 233 550 550 234 550 212 188 212 283 212 212 188 434 212 188 212 434 441 405 434 527 189 213 441 405 503 213 189 213 189 284 213 121 527 214 120 214 212 405 434 527 212 212 212 214 143 574 106 121 277 573 63 573 584 265 584 193 221 198 212 89 265
Bridge- and Tunnel Formwork
Bolt ISO 4014 M24 x 120-10.9, galv. Bolt ISO 4014 M24 x 120-10.9, galv. Ratchet Wrench 1" Ratchet Wrench 1" Socket SW 19-1/2" Socket SW 46-1" Socket SW 46-1" Socket SW 55-1" Socket SW 27-1/2" Socket SW 27-1/2" Tie Rod DW 15 l = 0,50 m Tie Rod DW 15 l = 0,50 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 0.85 m Tie Rod DW 15 l = 1.70 m Tie Rod DW 15 Spec. Length Tie Rod DW 15 Spec. Length Tie Rod DW 15 Spec. Length Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Cutting Cost Tie Rod DW 15/ B 15 Brace Frame Double Anchor DW 15 Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/50, galv. Hex. Nut DW 15 SW 30/108, galv. Hex. Nut DW 15 SW 30/108, galv. Wingnut DW 15, galv. Wingnut DW 15, galv. Wingnut DW 15, galv. Wingnut Counterplate DW 15, galv. Wingnut Counterplate DW 15, galv. Wingnut Counterplate DW 15, galv. Cam Nut DW 15, galv. Cam Nut DW 15, galv. Counterplate DW 15, 120 x 120 x 15 Tie Rod B 15 l = 0.30 m Tie Rod B 15 l = 0.30 m Tie Rod B 15 l = 0.30 m Tie Rod B 15 l = 0.30 m Tie Rod DW 15 l = 6.00 m Tie Rod DW 15 l = 1.50 m Tie Rod DW 15 l = 2.00 m Three Wingnut DW 15, galv. Formwork Joint 21/20 l = 2.50 m Formwork Joint 21/20 l = 2.50 m Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20 mm Plug Ø 20/24 mm Plug Ø 20/24 mm Plug Ø 20/24 mm Plug Ø 25 mm for TRS Plug Ø 25 mm for TRS Tie Rod DW 26 Spec. Length Tie Rod DW 26 Spec. Length Tie Rod DW 26 Spec. Length Wingnut Pivot Plate DW 15, galv. Wingnut Pivot Plate DW 15, galv. Wingnut Pivot Plate DW 15, galv.
Plywood, SystemIndependent Accessories
029560 029560 029610 029610 029620 029630 029630 029640 029650 029650 030005 030005 030010 030010 030020 030030 030030 030030 030050 030050 030050 030050 030050 030050 030050 030050 030060 030070 030070 030070 030070 030090 030090 030100 030100 030100 030110 030110 030110 030130 030130 030140 030150 030150 030150 030150 030160 030170 030180 030190 030260 030260 030290 030290 030290 030290 030300 030300 030300 030320 030320 030340 030340 030340 030370 030370 030370
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 031050 031050 031070 031070 031080 031080 031080 031090 031100 031120 031150 031200 031200 031200 031220 031260 031300 031320 031360 031390 031420 031435 031440 031455 031480 031480 031480 031480 031480 031520 031530 031550 031580 031590 031600 031626 031627 031627 031631 031632 031633 031634 031634 031635 031636 031637 031638 031639 031641 031642 031643 031643 031644 031644 031645 031646 031647 031648 031649 031650 031651 031652 031653 031654 031655 031655 031656 628
Tie Rod Wrench 20, galv. Tie Rod Wrench 20, galv. Tie Rod Wrench 15, galv. Tie Rod Wrench 15, galv. Drill Bit Ø 25 mm Drill Bit Ø 25 mm Drill Bit Ø 25 mm Form Lining Drill Bit Ø 20 x 1000 mm Drill Bit Ø 40 mm Drill Bit Ø 50 mm Waterstop Centrepiece DW 15 Chamfer Strip with Flange l = 2.50 m Chamfer Strip with Flange l = 2.50 m Chamfer Strip with Flange l = 2.50 m Climbing Cone-2 M 24/DW 15, galv. Concrete Spacer Tube FZR 22 l = 0.90 m Weld on Anchor DW 15 Cutting Cost Tube FZR 22 Plug FZR 22 mm Cone FZR 22 Release Agent PERI Clean, 20 L Release Agent PERI Clean, 208 L Release Agent Bio Clean, 20 L Release Agent Bio Clean, 208 L Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Socket Wrench SW 36, cromatized Pressure Sprayer Spray Nozzle (0,1 F 110) Repoxal Glue, 1 kg V-Tie Holder DW 15 V-Tie Holder DW 20 V-Tie Holder DW 26 Spacer Tube rough DR 28 l = 3.00 m Spacer Tube rough DR 32 l = 3.00 m Spacer Tube rough DR 32 l = 3.00 m Leading Anchor Coupler DW 15, compl. Leading Anchor Coupler DW 20, compl. Leading Anchor Coupler DW 26, compl. Spacer Tube rough DR 42 l = 3,00 m Spacer Tube rough DR 42 l = 3,00 m DK Cone DW 15/35 DK Cone DW 15/55 DK Cone DW 20/55 DK Cone DW 26/55 SK Sealing Washer UNI DW 15 DK Concrete Cone Architec. DW 15, 58/52 DK Concrete Cone DW 15 58/30 DK Concrete Cone UNI DW 15 58/52 DK Concrete Cone UNI DW 15 58/52 DK Tongs for Concrete Cone 58 DK Tongs for Concrete Cone 58 SK Anchor Cone DW 15 SK Anchor Cone DW 20 SK Anchor Cone DW 26 SK Sealing Washer DW 20 SK Sealing Washer DW 26 SK Concrete Cone DW 20, 67/60 SK Concrete Cone DW 26, 100/60 KK Concrete Cone M24 67/52 KK Concrete Cone M30 80/52 KK Concrete Cone M36 90/52 DK Cone Remover UNI DK Cone Remover UNI SK Tongs for Concrete Cone 67
220 551 217 550 554 583 590 554 554 554 215 143 283 573 434 218 215 218 218 218 533 533 532 532 233 410 418 438 554 532 532 218 190 192 194 217 190 217 190 192 194 192 195 226 226 226 226 228 227 227 227 230 232 552 228 228 228 229 229 230 230 231 231 231 232 551 232
031656 031657 031657 031671 031672 031673 031674 031675 031677 034010 034020 034030 034040 034050 034060 034070 034080 034100 034110 034120 034130 034140 034150 034160 034170 034180 034200 034210 034220 034230 034240 034250 034260 034280 034290 034320 034330 034350 034360 034370 034380 034390 034400 034410 034460 034470 034480 034500 034510 034520 034530 034540 034550 034550 034560 034570 034580 034580 034580 034580 034580 034580 034580 034610 034620 034640 034650
SK Tongs for Concrete Cone 67 SK Tongs for Concrete Cone 100 SK Tongs for Concrete Cone 100 SK Tube Seal 22 SK Tube Seal 28 Peridrain Fabric b = 2.80, l = 25.0 m Peridrain Fabric b = 1.50, l = 25.0 m PERI Hotknife SK Tube Seal 42 Panel HS 150 x 90 Panel HS 90 x 120 Panel HS 90 x 60 Panel HS 90 x 30 Panel HS 150 x 60 Panel HS 150 x 30 Panel HS 120 x 60 Panel HS 120 x 30 Multi Panel HSM 150 x 45 Multi Panel HSM 120 x 45 Multi Panel HSM 90 x 45 Filler Panel HSAP 150 x 15 Filler Panel HSAP 90 x 15 Inside Corner HSE 150 Inside Corner HSE 90 Filler Plate HSLA 150 Filler Plate HSLA 90 Articulated Corner HSG 150 Articulated Corner HSG 90 Inside Corner HSE 120 Articulated Corner HSG 120 Outside Corner Angle HSW 120 Outside Corner Angle HSW 150 Outside Corner Angle HSW 90 Filler Panel HSAP 120 x 15 Filler Plate HSLA 120 Filler Bar Steel HSAS 150 x 5 Filler Bar Steel HSAS 90 x 5 Striking Fillet HSL150 Striking Fillet HSL 90 Filler Bar Steel HSAS 120 x 5 Striking Fillet HSL120 Filler Support HSP 120 Filler Support HSP 150 Filler Support HSP 90 Filler Bar Steel HSAS 90 x 6 Filler Bar Steel HSAS 120 x 6 Filler Bar Steel HSAS 150 x 6 Clip HSC, galv. Compensation Waler HSR 59 Crane Hook HSKA Locking Strip HSS 60 Bulkhead Tie HST, galv. Brace Connector HSRA Brace Connector HSRA Scaffold Bracket HSK 80 Bracket HSK 60 Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Guardrail Post HSGP Top Tie Bracket HSAH, galv. Timber Holder HSKH 22, galv. Timber Strut Coupling HSRB Timber Holder SKH 14, galv.
552 232 552 229 229 572 572 572 229 112 118 118 117 112 112 115 115 112 115 118 113 118 113 119 114 119 113 119 116 116 116 113 119 115 116 114 120 114 119 117 117 117 114 119 120 117 114 120 120 124 124 120 122 207 122 123 105 123 89 151 390 415 529 124 122 122 122
629
Formwork Girders Wall Formwork Column Formwork Slab Formwork
292 292 292 292 292 292 292 292 292 292 292 292 293 293 523 523 523 523 523 523 523 422 423 422 425 423 428 424 425 423 425 424 424 424 430 429 428 429 429 427 427 404 426 427 405 248 294 269 258 286 393 436 436 437 249 295 271 260 287 394 437 248 294 270 259 286 394
Shoring Systems
Circular Column Panel Ø 40 cm h = 1.2 m Circular Column Panel Ø 40 cm h = 2.4 m Circular Column Panel Ø 40 cm h = 3.0 m Circular Column Panel Ø 45 cm h = 0.3 m Circular Column Panel Ø 45 cm h = 1.2 m Circular Column Panel Ø 45 cm h = 2.4 m Circular Column Panel Ø 45 cm h = 3.0 m Circular Column Panel Ø 50 cm h = 0.3 m Circular Column Panel Ø 50 cm h = 1.2 m Circular Column Panel Ø 50 cm h = 2.4 m Circular Column Panel Ø 50 cm h = 3.0 m Adapter Strip SRS-TRIO l = 3,00 m Circular Column Platform 25-70, compl. Circular Column Landing 25-70 3-Ply Panel 21 mm 2500 x 500 mm (red/yell) 3-Ply Panel 21 mm 5000 x 1000 mm (yellow) 3-Ply Panel 21 mm 2500 x 1000 mm (yellow) 3-Ply Panel 21 mm 1500 x 500 mm (red/yell) 3-Ply Panel 21 mm 2000 x 500 mm (red/yell) 3-Ply Panel 21 mm 2000 x 1000 mm (yellow) 3-Ply Panel 21 mm 3000 x 1000 mm (yellow) Climbing Bracket CB 240 Crane Eye CB 240 Carriage CB 240 Height Adjusting Unit CB Rack CB 240 Post Extension CB 180 Strongback CB 270 Connector TRIO-CB Climbing Bracket CB 160 Adjustable Brace CB 164-224 Platform Connection CB 160 Adjusting Unit CB 160 Strongback CB 380 Guardrail Connector CB Handrail Post CB 200 Platform Post CB 225 Handrail Post CB 190 Handrail Post CB 370 Finishing Platform Beam CB Tension Belt l = 5.70 m, 25 kN Tension Belt l = 5.70 m, 25 kN Tension Belt Connector CB Tension Belt Connector Wall M24 Tension Belt Connector Wall M24 Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 180/6, galv. Ladder 220/6 Sliding Hatch Cover Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Safety Cage 150, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv. Ladder Base, galv.
Climbing Systems
045041 045042 045043 045050 045051 045052 045053 045060 045061 045062 045063 045200 045210 045211 050000 050030 050040 050070 050080 050190 050200 051000 051010 051020 051030 051040 051050 051060 051090 051100 051110 051120 051130 051150 051160 051190 051200 051210 051220 051230 051250 051250 051260 051270 051270 051410 051410 051410 051410 051410 051410 051410 051420 051430 051450 051450 051450 051450 051450 051450 051450 051460 051460 051460 051460 051460 051460
Scaffolding, Stairs, Working Platforms
121 121 123 121 559 309 326 325 334 529 245 245 284 568 207 246 245 244 244 244 246 246 268 257 247 268 257 247 269 258 247 293 269 258 248 269 258 207 256 277 256 255 255 255 255 67 266 30 67 267 554 583 594 590 292 292 292 292 292 292 292 292 292 292 292 292 292
Bridge- and Tunnel Formwork
Quick Connector HSSA 10/12, galv. Quick Connector HSSA 14/16, galv. Foundation Tie Clamp HANDSET HLS Scaffold Tube Holder HSGH Bolt ISO 4016 M12 x 40-4.6 MU, galv. Stripping Cart, Alu Stripping Cart, Alu Guardrail Holder Guardrail Holder Guardrail Holder Tie Yoke DW 15 Bolt Ø 20 x 205, galv. Bolt Ø 20 x 205, galv. Bolt Ø 20 x 205, galv. Brace Connector-3 RAPID, galv. Brace Connector-3 RAPID, galv. Chamfer Strip RAPID l = 3,0 m Column Frame 300, Alu Column Frame 210, Alu Column Frame 60, Alu Crane Lifting Unit-2 RAPID Concreting Platform, compl. Concreting Platform, compl. Concreting Platform, compl. Concreting Landing Concreting Landing Concreting Landing Guardrail Landing 52, galv. Guardrail Landing 52, galv. Guardrail Landing 52, galv. Guardrail Landing 134, galv. Guardrail Landing 134, galv. Guardrail Landing 134, galv. Guardrail Landing 134, galv. Crane Hook Concreting Platform Crane Hook Concreting Platform Crane Hook Concreting Platform Brace Connector QR Brace Connector QR Brace Connector QR Frame Spanner QUATTRO QA Base Plate QUATTRO QB Chamfer Strip QDL 50 Chamfer Strip QDL 125 Chamfer Strip QDL 275 Lifting Gear "Combi"-2 TRIO Lifting Gear "Combi"-2 TRIO Lifting Gear-3 TRIO Lifting Gear-3 TRIO Lifting Gear-3 TRIO Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Rivet Gun BZ 48, l = 500 mm Circular Column Panel Ø 25 cm h = 0.3 m Circular Column Panel Ø 25 cm h = 1.2 m Circular Column Panel Ø 25 cm h = 2.4 m Circular Column Panel Ø 25 cm h = 3.0 m Circular Column Panel Ø 30 cm h = 0.3 m Circular Column Panel Ø 30 cm h = 1.2 m Circular Column Panel Ø 30 cm h = 2.4 m Circular Column Panel Ø 30 cm h = 3.0 m Circular Column Panel Ø 35 cm h = 0.3 m Circular Column Panel Ø 35 cm h = 1.2 m Circular Column Panel Ø 35 cm h = 2.4 m Circular Column Panel Ø 35 cm h = 3.0 m Circular Column Panel Ø 40 cm h = 0.3 m
Plywood, SystemIndependent Accessories
034660 034670 034680 034690 035440 035500 035500 035700 035700 035700 037150 037160 037160 037160 037190 037190 037210 037250 037260 037270 037320 037400 037400 037400 037410 037410 037410 037420 037420 037420 037430 037430 037430 037430 037440 037440 037440 037530 037530 037530 037540 037550 037590 037600 037610 044760 044760 044770 044770 044770 044890 044890 044890 044890 045010 045011 045012 045013 045020 045021 045022 045023 045030 045031 045032 045033 045040
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 051460 051610 051630 051640 051640 051650 051650 051764 052010 052020 052060 052090 052095 052130 052150 052159 052240 052260 052261 052270 052271 052380 052460 052590 052621 052622 052624 052800 052810 052815 052816 052818 052820 052821 052822 052823 052824 052828 052829 052830 052831 052839 054200 054210 054220 054230 054240 054240 054304 054305 054314 054315 054324 054325 054334 054335 054344 054345 054354 054355 054364 054365 054374 054375 054384 054391 054395 630
Ladder Base, galv. Side Guardrail Post Intermediate Handrail Post CB Lag Screw DIN 571 6 x 80, galv. Lag Screw DIN 571 6 x 80, galv. F.H. Bolt DIN 603 M6 x 180 MU, galv. F.H. Bolt DIN 603 M6 x 180 MU, galv. Ratchet Wrench 3/4" Plywood 4 mm 2500 x 1250 mm Plywood 8 mm 2500 x 1250 mm Fin-Ply 21 mm 1500 x 2500 mm Fin-Ply 9 mm SDP 150 x 75 Fin-Ply 9 mm 1500 x 3000 mm Fin-Ply 9 mm SDP 75 x 75 Fin-Ply 12 mm 1500 x 3000 mm Fin-Ply 15 mm 1500 x 3000 mm Fin-Ply 18 mm 1500 x 3000 mm Fin-Ply 21 mm 1250 x 2500 mm Rus-Ply 21 mm 1250 x 2500 mm Fin-Ply 21 mm 1500 x 3000 mm Rus-Ply 21 mm 1500 x 3000 mm 3-Ply Panel 21 mm 5000 x 2000 mm (yellow) Fin-Ply 30 mm 1250 x 3610 mm 3-Ply Panel 21 mm 2500 x 1500 mm (yellow) Brasil Coated Ply 21 mm 2500 x 1250 mm Chinese Coated Ply 21 mm 1250 x 2500 mm Chinese Coated Ply 21 mm 500 x 2500 mm Conifer Plywood 20 mm 2500 x 1250 mm Fin-Ply 9 mm SDP 150 x 37,5 Fin-Ply 9 mm SDP 75 x 37,5 Fin-Ply 9 mm SDP 150 x 50 Fin-Ply 9 mm SDP 75 x 50 PERI Birch 21 mm 1250 x 2500 mm PERI Beto 21 mm 1250 x 2500 mm PERI Beto 21 mm 1500 x 3000 mm Fin-Ply Maxi 20 mm 7500 x 2700 mm PERI Beto 21 mm 625 x 2500 mm FinNa-Ply 21 mm 2500 x 1250 mm Fin-Ply Maxi 20 mm 5400 x 2000 mm PERI Spruce 21 mm 2500 x 1250 mm PERI Spruce 21 mm 2500 x 500 mm Arauco Pine 21 mm 2500 x 1250 mm Column Panel TRS 270 x 90 Column Panel TRS 120 x 90 Column Panel TRS 60 x 90 Column Tie Bolt TRIO, galv. Chamfer Strip 15/15 l = 2.70 m Chamfer Strip 15/15 l = 2.70 m Panel TR/4 330 x 240 Panel TRIO Structure TS/4 330 x 240 Panel TR/4 330 x 120 Panel TRIO Structure TS/4 330 x 120 Panel TR/4 330 x 90 Panel TRIO Structure TS/4 330 x 90 Panel TR/4 330 x 72 Panel TRIO Structure TS/4 330 x 72 Multi Panel TRM/4 330 x 72 Panel TRIO Structure TSM/4 330 x 72 Panel TR/4 330 x 60 Panel TRIO Structure TS/4 330 x 60 Panel TR/4 330 x 30 Panel TRIO Structure TS/4 330 x 30 Inside Corner TE/4 330 Corner TRIO Structure TSE/4 330 Filler Plate LA/4 330 x 36 Wall Thickness Comp. WDA/4-2 330 x 5 Wall Thickness Comp. WDAS/4 330 x 5, Alu
436 431 431 431 562 432 565 549 522 522 520 595 520 595 520 520 520 520 520 520 520 523 520 523 522 522 522 523 595 595 595 595 521 521 521 520 521 523 520 521 521 523 264 264 264 265 266 574 40 60 40 60 40 60 41 60 42 60 41 60 41 60 42 60 44 43 60
054401 054405 054414 054430 054435 054461 054464 054475 054480 054500 054501 054502 054503 054504 054505 054506 054510 054511 054512 054517 054518 054519 054528 054529 057050 057276 061000 061010 061011 061013 061020 061021 061022 061023 061024 061026 061027 061030 061036 061038 061045 061046 061049 061051 061052 061060 061061 061062 061100 061110 061160 061180 061200 061210 061230 061250 061260 061260 061260 061280 061290 061300 061310 061500 061500 061510 061510
Wall Thickness Comp. WDA/4-2 330 x 6 Wall Thickness Comp. WDAS/4 330 x 6, Alu Articulated Corner TGE/4 330 Filler Support TPA 330 Wall Thickness Comp. WDA/4 330 x 10, Alu Prop with Kicker TRH 116 Spacer TRH 15-30 Guardrail Post TRH Tie TRH 15 - 30 / 99 Platform TRP 240 Platform TRP 120 Platform TRP 90 Platform TRP 72 Platform TRP 60 Platform TRP 240 with Hatch Platform TRP 120 with Hatch Brace TRP 77-114, compl. Brace TRP 240-300, compl. Brace TRP 300-360, compl. Erection Device TRP 200, 10 kN Kicker TRP End Guardrail Frame TRP Bracing TRP 120 Bracing TRP 240 Suspension Tube Vario 53 Socket SW 30-3/4" Panel SDP 150 x 75 Panel SDP 75 x 75 Panel SDP 150 x 50 Panel SDP 75 x 50 Panel SDP 150 x 37.5 Triangular Frame SDR 150 x 75 Triangular Frame SDR 75 x 75 End Support SSL Cover Strip SAL 50 Cover Strip SAL 150 Cover Strip SAL 75 Panel SDP 75 x 37.5 Filler Timber SPH 225 Cover Strip SAL 37.5 Edge Beam SRT-2 150 Edge Beam SRT-2 75 Filler Timber SPH 150 Wall Holder SWH-2 Table Connector STV Platform SDB 150 Platform SDB 225 Platform SDB 300 Main Beam SLT 225 Main Beam SLT 150 Main Beam SLT 375 Combihead SCK Prophead SSK Drophead SFK Bolt EN 14399-4 M12 x 140-10.9 Guardrail Holder SGH, Alu Guardrail Post SGP Guardrail Post SGP Guardrail Post SGP Panel Wedge Clip SPKK Panel Clip SPK Erection Aid SSH, Alu Tension Sleeve SAO Pallet SD 150 x 75, galv. Pallet SD 150 x 75, galv. Pallet Lifting Trolley 1500 mm Pallet Lifting Trolley 1500 mm
43 60 42 44 43 86 87 85 88 69 69 69 69 69 69 69 71 71 71 72 71 73 71 71 147 550 300 300 300 300 300 303 303 304 301 301 301 300 303 301 301 301 303 303 304 305 305 306 300 301 300 302 302 302 560 306 306 334 356 304 304 305 305 308 538 308 485
631
Formwork Girders Wall Formwork Column Formwork Slab Formwork
238 239 238 238 238 238 238 239 238 238 238 238 238 239 238 240 240 240 239 239 239 240 94 95 94 95 96 94 95 97 96 96 96 97 99 99 100 99 99 101 100 101 100 100 100 101 103 102 103 102 102 103 103 103 104 104 106 207 105 105 107 107 108 108 108 540 104
Shoring Systems
Corner Reveal WD 24, 193.5 cm Striking Strip WD 24, 70/21 Vertical Reveal WD 24, 193.5 cm Corner Reveal WD 25, 42.7 cm Corner Reveal WD 25, 49.0 cm Corner Reveal WD 25, 70.5 cm Corner Reveal WD 25, 193.5 cm Striking Strip WD 25, 70/21 Vertical Reveal WD 25, 193.5 cm Corner Reveal WD 30, 42.7 cm Corner Reveal WD 30, 49.0 cm Corner Reveal WD 30, 70.5 cm Corner Reveal WD 30, 193.5 cm Striking Strip WD 30, 70/21 Vertical Reveal WD 30, 193.5 cm Framing Member ASP, l = 2.50 m Framing Member ASP, l = 3.00 m Framing Member ASP, l = 3.50 m Stiffening Panel ASP 87,0 x 74,5 cm Stiffening Panel ASP 60,0 x 125,0 cm Stiffening Panel ASP 60,0 x 150,0 cm Cutting Cost ASP Panel DOMINO 250 x 100 Panel DOMINO DA 250 x 100 Panel DOMINO 250 x 75 Panel DOMINO DA 250 x 75 Multi Panel DOMINO DM 250 x 75 Panel DOMINO 250 x 50 Panel DOMINO 250 x 25 Outside Corner Angle DAW 250 Articulated Corner DGE 250 Wall Thickness Comp. DWD 250 x 5 Multi Panel DOMINO Alu DMA 250 x 75 Filler Support DPA 250 Panel D 125 x 100 Panel D 125 x 75 Multi Panel DM 125 x 75 Panel D 125 x 50 Panel D 125 x 25 Outside Corner Angle DAW 125 Articulated Corner DGE 125 Wall Thickness Comp. DWD 125 x 5 Panel DA 125 x 100 Panel DA 125 x 75 Multi Panel Alu DMA 125 x 75 Filler Support DPA 125 Panel D 75 x 100 Panel D 75 x 75 Multi Panel DM 75 x 75 Panel D 75 x 50 Panel D 75 x 25 Outside Corner Angle DAW 75 Articulated Corner DGE 75 Wall Thickness Comp. DWD 75 x 5 Alignment Coupler DRS Wedge Clamp DKS Brace Connector DRA Brace Connector DRA Compensation Waler DAR Scaffold Bracket DG 85 Top Tie Bracket DAH Foundation Tie Clamp DOMINO DLS Lifting Hook DOMINO 500 kg Stacking Aid DOMINO DSH Stacking Device DOMINO, galv. Stacking Device DOMINO, galv. Positioning DGE 135° internal
Climbing Systems
065109 065110 065111 065112 065113 065114 065115 065116 065117 065118 065119 065120 065121 065122 065123 065124 065125 065126 065127 065128 065129 065130 066020 066021 066022 066023 066024 066025 066026 066028 066029 066030 066032 066033 066040 066041 066042 066043 066044 066046 066047 066048 066050 066051 066052 066053 066060 066061 066062 066063 066064 066066 066067 066068 066080 066081 066082 066082 066084 066085 066086 066090 066091 066093 066094 066094 066095
Scaffolding, Stairs, Working Platforms
542 308 307 538 485 536 530 531 531 531 531 531 531 531 531 531 217 217 217 218 218 526 527 527 528 528 370 539 531 342 342 343 526 526 526 342 402 432 529 485 537 485 536 343 343 343 314 307 575 314 307 576 344 528 124 539 125 540 238 238 238 238 239 238 238 238 238
Bridge- and Tunnel Formwork
Pallet Lifting Trolley 1500 mm Transportation Fork SUG, galv. Pallet SD 150 x 225, galv. Pallet SD 150 x 225, galv. Crate Pallet 80 x 120, painted Crate Pallet 80 x 120, painted Drying Locker Klima TS 2000 HM Concrete Scraper L = 1180, B = 54 HM Concrete Scraper L = 900, B = 102 HM Concrete Scraper L = 1180, B = 102 HM Concrete Scraper L = 1180, B = 170 Butt Strap 54/30 mm Butt Strap 102/30 mm Butt Strap 170/30 mm HM Turnover Board 16/16 mm Wood Handle L = 1180 mm Spacer Tube rough DR 22 l = 2.00 m Spacer Tube rough DR 22 l = 0.21 m Spacer Tube rough DR 22 l = 0.27 m Cone DR 22 Plug DR 22 Stopend Sleeve DW 15 Stopend Trestle Peg Wall Clamp 55 Wall Clamp 105 Pallet ST 100/2, galv. Pallet ST 100/2, galv. Trestle P 80 UZ Beam Bracket 40 UZ Beam Width Adjustment Bar 80 UZ Beam Yoke Waler 100 Plug for Stopend Sleeve DW 15 Formwork Bracket-2 Slab Stopend Bar 105 UZ Beam Width Adjustment Bar 129 End Guardrail Frame 55 End Guardrail Frame 55 End Guardrail Frame 55 Lid for Wire Crate Pallet 80 x 120, painted Lid for Wire Crate Pallet 80 x 120, painted Crate Pallet 80 x 120, galv. Crate Pallet 80 x 120, galv. AW Slab Stopend Angle AW Handrail Post AW Clamp 8-10 Anchor Chain 3,0 kN l = 2.5 m Anchor Chain 3,0 kN l = 2.5 m Anchor Chain 3,0 kN l = 2.5 m Turnbuckle 3.0 kN, M 12 Turnbuckle 3.0 kN, M 12 Turnbuckle 3.0 kN, M 12 AW Bracket Wall Clamp 75 Pallet HS 120 x 90, galv. Pallet HS 120 x 90, galv. Pallet HS 150 x 90, galv. Pallet HS 150 x 90, galv. Corner Reveal WD 20, 42.7 cm Corner Reveal WD 20, 49.0 cm Corner Reveal WD 20, 70.5 cm Corner Reveal WD 20, 193.5 cm Striking Strip WD 20, 70/21 Vertical Reveal WD 20, 193.5 cm Vertical Reveal WD 20, 42.7 cm Corner Reveal WD 24, 49.0 cm Corner Reveal WD 24, 70.5 cm
Plywood, SystemIndependent Accessories
061510 061520 061530 061530 065016 065016 065017 065018 065019 065020 065021 065022 065023 065024 065025 065026 065027 065030 065031 065033 065036 065039 065040 065042 065045 065046 065050 065050 065051 065056 065057 065058 065060 065062 065063 065065 065066 065066 065066 065067 065067 065068 065068 065070 065071 065072 065073 065073 065073 065074 065074 065074 065075 065076 065080 065080 065081 065081 065100 065101 065102 065103 065104 065105 065106 065107 065108
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 066097 066099 066100 070030 070100 070710 070710 070711 070711 070712 070712 070713 070713 070740 070740 070760 070760 070890 071200 071202 071204 071204 071204 071209 071216 071216 071216 071217 071217 071217 071218 071219 071271 071290 071291 071340 071340 071350 071351 071355 071356 071357 071358 071359 071361 071362 071364 072140 072140 072150 072150 072160 072160 072170 072170 072180 072180 072180 072180 072210 072210 072220 072220 072230 072230 072240 072240 632
Positioning DGE 135° external Stacking Aid DOMINO DSW Positioning DEA 90° Bulldog-Spike Ø 48/12 mm Bolt ISO 4016 M12 x 120-4.6 MU, galv. Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, S7/MS7 Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S10/MS10 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, S13/MS13 Softwood Timber DIN 4074-1, Ü-Marking Softwood Timber DIN 4074-1, Ü-Marking Erection Bar GT/VT, galv. Erection Bar GT/VT, galv. Crane Splice GT 24 Crane Splice GT 24 Nut ISO 7042 M16-8, galv. Cleaning Plywood and Frame DOMINO RS Cleaning Service TRIO Additional Cleaning Cost Additional Cleaning Cost Additional Cleaning Cost RS Cleaning Service SKYDECK Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 60 mm in Surface Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 40 mm in Surface Sealing Hole Ø 40 mm in Surface Screw Change HB, incl. Screws Screw Change HBU, HBUD Assembly on Site Design Calculation Structural Calculation for Approval Formwork Repair i.e. Weldings Formwork Repair i.e. Weldings Design Work and Technical Advice Shop Drawings for MX, TRIO, DO, HS Shop Drawings for SKYDECK Shop Drawings for MULTIFLEX Shop Drawings for Slab Tables Shop Drawings for FB 180 Shop Drawings for RCS, CB, SKS Shop Drawings for Special Forms Design Work incl. Cycle Plans, Parts List Supervisor Bit Point TX 30 Bit Point TX 30 Electric Power Wrench M 14, ASB 636 Electric Power Wrench M 14, ASB 636 Extension 1/2" l = 250 mm Extension 1/2" l = 250 mm Socket SW 13-1/2" l = 80 mm Socket SW 13-1/2" l = 80 mm Ratchet Wrench 1/2" Ratchet Wrench 1/2" Ratchet Wrench 1/2" Ratchet Wrench 1/2" Power-Screwdriver SCU 7-9 Power-Screwdriver SCU 7-9 Bit Holder for SCU 7-9 Bit Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Magnetic Holder for SCU 7-9 Depth Chuck for SCU 7-9 Depth Chuck for SCU 7-9
104 108 104 576 559 487 576 487 576 487 576 487 576 325 553 146 162 561 590 580 580 590 594 594 583 590 594 583 590 594 136 137 598 598 598 583 594 598 598 598 598 598 598 598 598 598 598 138 546 138 546 139 546 139 547 139 233 516 549 138 546 138 546 138 546 138 546
072700 072710 074890 074890 074905 074905 074910 074910 074920 074920 074930 074930 074940 074940 074950 074950 074960 074960 074970 074970 074980 074980 074990 074990 075100 075100 075120 075120 075150 075150 075180 075180 075210 075210 075240 075240 075270 075270 075300 075300 075330 075330 075360 075360 075390 075390 075420 075420 075450 075450 075480 075480 075510 075510 075540 075540 075570 075570 075600 075600 079300 079360 079420 079480 079540 079600 082001
Table Module VT 200/215 x 400 Table Module VT 200/215 x 500 Girder VT 20K l = 2.65 m Girder VT 20K l = 2.65 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.15 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.45 m Girder VT 20K l = 2.90 m Girder VT 20K l = 2.90 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.30 m Girder VT 20K l = 3.60 m Girder VT 20K l = 3.60 m Girder VT 20K l = 3,90 m Girder VT 20K l = 3,90 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.50 m Girder VT 20K l = 4.90 m Girder VT 20K l = 4.90 m Girder VT 20K l = 5.90 m Girder VT 20K l = 5.90 m Girder VT 20K l = 1.45 m Girder VT 20K l = 1.45 m Girder GT 24 l = 0.90 m Girder GT 24 l = 0.90 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.20 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.50 m Girder GT 24 l = 1.80 m Girder GT 24 l = 1.80 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.10 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.40 m Girder GT 24 l = 2.70 m Girder GT 24 l = 2.70 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.00 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.30 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.60 m Girder GT 24 l = 3.90 m Girder GT 24 l = 3.90 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.20 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.50 m Girder GT 24 l = 4.80 m Girder GT 24 l = 4.80 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.10 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.40 m Girder GT 24 l = 5.70 m Girder GT 24 l = 5.70 m Girder GT 24 l = 6.00 m Girder GT 24 l = 6.00 m Alu Beam MPB 24 l = 3.00 m Alu Beam MPB 24 l = 3.60 m Alu Beam MPB 24 l = 4.20 m Alu Beam MPB 24 l = 4.80 m Alu Beam MPB 24 l = 5.40 m Alu Beam MPB 24 l = 6.00 m Repair Service RK, SDP 150 x 75
330 330 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 6 321 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 2 320 354 354 354 354 354 354 594
633
Formwork Girders Wall Formwork Column Formwork Slab Formwork
581 581 581 581 581 582 582 582 581 581 581 581 582 582 581 582 582 582 582 581 581 582 582 582 163 163 378 462 378 462 378 462 378 462 378 461 378 461 378 461 377 461 380 456 380 464 456 380 464 456 380 464 456 380 464 456 380 464 456 463 463 382 466 382 466 382 466
Shoring Systems
Repair Service RG, TR 120 x 90 Repair Service RG, TR 120 x 72 Repair Service RG, TR 120 x 60 Repair Service RG, TR 120 x 30 Repair Service RG, TR 120 x 24 Repair Service RG, TRA 90 x 120 Repair Service RG, TRA 90 x 60 Repair Service RG, TRA 90 x 30 Repair Service RG, TR 60 x 90 Repair Service RG, TR 60 x 72 Repair Service RG, TR 60 x 60 Repair Service RG, TR 60 x 30 Repair Service RG, TRM 330 x 72 Repair Service RG, TRM 270 x 72 Repair Service RG, TRM 120 x 72 Repair Service RG, TAM 270 x 72 Repair Service RG, TAM 90 x 72 Repair Service RG, TE 330 Repair Service RG, TE 270 Repair Service RG, TE 120 Repair Service RG, TE 60 Repair Service RG, TRS 270 x 90 Repair Service RG, TRS 120 x 90 Repair Service RG, TRS 60 x 90 Template for RUNDFLEX A85, I72 Template f. RUNDFLEX A250, I240, A128, I123 Top Standard UVH 100 Top Standard UVH 100 Top Standard UVH 150 Top Standard UVH 150 Top Standard UVH 200 Top Standard UVH 200 Top Standard UVH 250 Top Standard UVH 250 Standard UVR 200 Standard UVR 200 Standard UVR 300 Standard UVR 300 Standard UVR 400 Standard UVR 400 Base Standard UVB 24 Base Standard UVB 24 Ledger UH 75 Ledger UH 75 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 400 Ledger UH 400 Ledger UH 400 Decking Transom UHD 72 Decking Transom UHD 104 Horizontal Brace UBH 150/150 Horizontal Brace UBH 150/150 Horizontal Brace UBH 200/200 Horizontal Brace UBH 200/200 Horizontal Brace UBH 250/250 Horizontal Brace UBH 250/250
Climbing Systems
083026 083027 083028 083029 083030 083031 083032 083033 083034 083035 083036 083037 083038 083039 083040 083041 083042 083043 083044 083045 083046 083047 083048 083049 098217 099540 100000 100000 100003 100003 100005 100005 100007 100007 100009 100009 100012 100012 100013 100013 100014 100014 100017 100017 100021 100021 100021 100023 100023 100023 100025 100025 100025 100027 100027 100027 100029 100029 100029 100031 100039 100042 100042 100047 100047 100049 100049
Scaffolding, Stairs, Working Platforms
594 594 594 594 594 580 580 580 580 580 580 580 580 580 580 580 580 580 580 581 581 581 580 580 580 580 580 580 580 581 581 581 580 580 580 580 580 580 580 581 581 580 580 580 580 581 581 581 582 582 582 582 582 582 582 582 582 582 582 582 582 582 582 582 582 581 581
Bridge- and Tunnel Formwork
Repair Service RK, SDP 150 x 50 Repair Service RK, SDP 150 x 37,5 Repair Service RK, SDP 75 x 75 Repair Service RK, SDP 75 x 50 Repair Service RK, SDP 75 x 37,5 Repair Service RK, TR 330 x 240 Repair Service RK, TR 330 x 120 Repair Service RK, TR 330 x 90 Repair Service RK, TR 330 x 72 Repair Service RK, TR 330 x 60 Repair Service RK, TR 330 x 30 Repair Service RK, TR 330 x 24 Repair Service RK, TR 270 x 240 Repair Service RK, TR 270 x 120 Repair Service RK, TR 270 x 90 Repair Service RK, TR 270 x 72 Repair Service RK, TR 270 x 60 Repair Service RK, TR 270 x 30 Repair Service RK, TR 270 x 24 Repair Service RK, TRA 270 x 90 Repair Service RK, TRA 270 x 60 Repair Service RK, TRA 270 x 30 Repair Service RK, TR 120 x 240 Repair Service RK, TR 120 x 120 Repair Service RK, TR 120 x 90 Repair Service RK, TR 120 x 72 Repair Service RK, TR 120 x 60 Repair Service RK, TR 120 x 30 Repair Service RK, TR 120 x 24 Repair Service RK, TRA 90 x 120 Repair Service RK, TRA 90 x 60 Repair Service RK, TRA 90 x 30 Repair Service RK, TR 60 x 90 Repair Service RK, TR 60 x 72 Repair Service RK, TR 60 x 60 Repair Service RK, TR 60 x 30 Repair Service RK, TRM 330 x 72 Repair Service RK, TRM 270 x 72 Repair Service RK, TRM 120 x 72 Repair Service RK, TAM 270 x 72 Repair Service RK, TAM 90 x 72 Repair Service RK, TE 330 Repair Service RK, TE 270 Repair Service RK, TE 120 Repair Service RK, TE 60 Repair Service RK, TRS 270 x 90 Repair Service RK, TRS 120 x 90 Repair Service RK, TRS 60 x 90 Repair Service RG, TR 330 x 240 Repair Service RG, TR 330 x 120 Repair Service RG, TR 330 x 30 Repair Service RG, TR 330 x 90 Repair Service RG, TR 330 x 72 Repair Service RG, TR 330 x 60 Repair Service RG, TR 330 x 24 Repair Service RG, TR 270 x 240 Repair Service RG, TR 270 x 120 Repair Service RG, TR 270 x 90 Repair Service RG, TR 270 x 72 Repair Service RG, TR 270 x 60 Repair Service RG, TR 270 x 30 Repair Service RG, TR 270 x 24 Repair Service RG, TRA 270 x 90 Repair Service RG, TRA 270 x 60 Repair Service RG, TRA 270 x 30 Repair Service RG, TR 120 x 240 Repair Service RG, TR 120 x 120
Plywood, SystemIndependent Accessories
082002 082003 082004 082005 082006 082007 082008 082009 082010 082011 082012 082013 082014 082015 082016 082017 082018 082019 082020 082021 082022 082023 082024 082025 082026 082027 082028 082029 082030 082031 082032 082033 082034 082035 082036 082037 082038 082039 082040 082041 082042 082043 082044 082045 082046 082047 082048 082049 083007 083008 083009 083010 083011 083012 083013 083014 083015 083016 083017 083018 083019 083020 083021 083022 083023 083024 083025
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 100051 100051 100053 100053 100055 100055 100057 100057 100059 100059 100061 100061 100063 100063 100065 100065 100067 100067 100069 100069 100076 100079 100082 100085 100088 100091 100093 100149 100159 100183 100185 100192 100224 100235 100242 100242 100244 100244 100265 100266 100267 100268 100301 100301 100322 100330 100336 100339 100349 100355 100355 100373 100373 100375 100375 100377 100401 100411 100411 100416 100419 100422 100425 100428 100440 100444 100452 634
Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/150 Horizontal Brace UBH 300/300 Horizontal Brace UBH 300/300 Ledger Brace UBL 150/100 Ledger Brace UBL 150/100 Ledger Brace UBL 150/200 Ledger Brace UBL 150/200 Ledger Brace UBL 200/100 Ledger Brace UBL 200/100 Ledger Brace UBL 200/200 Ledger Brace UBL 200/200 Ledger Brace UBL 250/100 Ledger Brace UBL 250/100 Ledger Brace UBL 250/200 Ledger Brace UBL 250/200 Ledger Brace UBL 300/100 Ledger Brace UBL 300/100 Ledger Brace UBL 300/200 Ledger Brace UBL 300/200 Decking Transom UHD 150 Decking Transom UHD 200 Decking Transom UHD 250 Decking Transom UHD 300 Wall Tie UWT 45 Wall Tie UWT 110 Wall Tie UWT 140 Console Bracket UCB 104 Adj. Base Plate UJS 38-80/50 Swivel Latt. Girder Steel ULS 70/625 Latt. Girder Steel ULS 70/525 Ledger UH 104 Console Bracket UCB 72 Console Bracket UCB 32 Adj. Base Plate UJB 38-80/55 Adj. Base Plate UJB 38-80/55 Base Plate UJP Base Plate UJP Guardrail UPG 150 Guardrail UPG 200 Guardrail UPG 250 Guardrail UPG 300 Spigot ULT 32 Spigot ULT 32 Pavement Gantry UVG 176/240 Latt. Girder Steel ULS 50/425 Latt. Girder Steel ULS 50/525 Latt. Girder Steel ULS 50/625 End Guardrail UPX 104 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 150 Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 200 Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 250 Steel Deck UDS 32 x 300 Bracket Brace UCP 72/104 Adj. Base Plate UJB 38-50/30 Adj. Base Plate UJB 38-50/30 Coupler Brace UBC 150/200 Coupler Brace UBC 200/200 Coupler Brace UBC 250/200 Coupler Brace UBC 300/200 Coupler Brace UBC 72-104/200 Ledger UH 72 End Guardrail UPX 72 Hook for Scaffold Components
382 466 382 466 381 465 381 465 381 465 381 465 381 465 381 465 381 465 381 465 463 463 463 463 480 480 480 471 460 487 487 464 471 471 374 460 374 461 475 475 475 475 379 488 473 487 487 487 470 467 450 467 450 467 450 467 472 374 460 483 483 483 483 483 464 470 490
100478 100486 100486 100488 100488 100503 100514 100516 100518 100529 100541 100572 100573 100574 100575 100580 100581 100583 100660 100660 100678 100678 100693 100694 100695 100696 100697 100698 100711 100719 100719 100737 100738 100742 100750 100778 100810 100813 100820 100830 100840 100852 100863 100863 100870 100871 100901 100901 100903 100908 100909 100954 100956 100969 100973 100977 100981 100985 100989 100993 101159 101159 101241 101242 101243 101244 101245
Locking Bolt Ø 48/57 Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 104 Steel Deck UDS 32 x 72 Steel Deck UDS 32 x 72 Protection Panel UPP 250 x 100 Protection Panel UPP 300 x 100 Protection Panel UPP 200 x 100 Protection Panel UPP 150 x 100 Starter Tube ULB 50/70 Connector for Platform VARIO Node Brace UBK 150/200 Node Brace UBK 200/200 Node Brace UBK 250/200 Node Brace UBK 300/200 Coupler Transom UHC 72 Coupler Transom UHC 104 Connection Protect Panel UPC Frame Pallet USP 72, galv. Frame Pallet USP 72, galv. Frame Pallet USP 104, galv. Frame Pallet USP 104, galv. Ring Bolt UFE 12/90 Ring Bolt UFE 12/120 Ring Bolt UFE 12/190 Wall Insert UFI 14/70 Wall Insert UFI 14/100 Wall Insert UFI 14/135 Console Bracket UCB 36 Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Hex. Bolt ISO 4014 M10 x 70-8.8 MU, galv. Staircase UAS 64 x 250/200, Alu Staircase UAS 64 x 300/200, Alu Stair Guardrail UAG Spacer UEC 10 Stiffening Board, 420 x 400 mm Guardrail UPG 400 Platform Guardrail 80 Steel Deck UDS 32 x 400 Stair Guardrail UAH Node Brace UBK 104/200 Latt. Girder Steel ULS 70/825 Handle Lock UJS Handle Lock UJS Base Beam UVA 250 Netting Tie SB-L Tension Strut, l = 740 mm SB-L Tension Strut, l = 740 mm SB-L Anchor Bracket Tension Coupler Ø 48,3 mm Tube Connector Ø 48,3 mm Table Swivel Head, Middle Part Table Swivel Head, Lower Part Node Brace UBK 72/200 Node Brace UBK 150/150 Node Brace UBK 104/100 Node Brace UBK 150/100 Node Brace UBK 200/100 Node Brace UBK 250/100 Node Brace UBK 300/100 Ledger UH 100 Ledger UH 100 VARIO Standard Panel S 250 x 240 VARIO Standard Panel S 250 x 300 VARIO Standard Panel S 250 x 360 VARIO Standard Panel S 250 x 420 VARIO Standard Panel S 250 x 480
482 467 450 467 450 474 474 474 474 488 150 466 466 466 466 474 474 473 483 542 483 542 480 480 480 480 480 480 470 379 483 446 446 448 482 331 475 150 467 448 466 487 377 461 475 486 185 185 186 482 482 331 331 466 466 466 466 466 466 466 380 456 128 128 128 128 128
635
Formwork Girders Wall Formwork Column Formwork Slab Formwork
476 497 497 187 497 497 497 470 50 55 44 337 239 239 488 239 489 239 336 393 98 98 98 98 98 102 102 102 102 102 101 96 233 552 204 187 487 487 309 326 572 572 573 573 514 559 506 506 507 507 507 508 508 509 509 510 337 512 506 506 337 516 512 513 508 223 515
Shoring Systems
Ledger Bracket UHA Heavy Duty Spindle SLS 80/140 Heavy Duty Spindle SLS 100/180 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 140/240 Heavy Duty Spindle SLS 200/300 Heavy Duty Spindle SLS 260/360 End Guardrail in Advance UPA 104 Filler Profile TPP 270, Alu Filler Profile TPP 120, Alu Filler Profile TPP 330, Alu Central cross 170 Striking Strip WD 20, 70-250/21 Striking Strip WD 24, 70-250/21 Castor UEW 12 with Spigot Striking Strip WD 25, 70-250/21 Castor UEW 12 with Spindle Striking Strip WD 30, 70-250/21 Lifting Fork 1 t / 5,0 m Height Compensation HD, h = 200 mm Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 Wall Thickness Comp. DWD 125 x 10 Wall Thickness Comp. DWD 250 x 10 Concrete Cone Gauge Concrete Cone Gauge Base Plate-2 for RS 1000, galv. Base Plate-2 for RS 1000, galv. Plastic Sheeting UT 2.70 x 20.0 m Plastic Sheeting UT 3.25 x 20.0 m Stripping Cart ASW 465, compl. Stripping Cart ASW 465, compl. Peridrain Clip Peridrain Edge Strip Clip Spax Screw SK 3,5 x 45, galv. Peridrain Edge Strip Anchor Sleeve M24, galv. Bolt ISO 4017 M12 x 30-8.8, galv. GKB Cantilever Parapet Platform 180 x 240 GKB Cantilever Parapet Platform 180 x 120 GKB Protection Board 240 GKB Protection Board 120 GKB Protection Board 90/120 GKB Soffit Formwork 45 x 245 GKB Soffit Formwork 45 x 120 GKB Board Formwork 140 x 120 GKB Spindle for Cantilever Slab Formwork GKB Work Cage Back Stop Lifting Fork 1 t / 5,0 m GKB Abutment Bracket 180 GKB Abutment Platform 180 x 240 GKB Abutment Platform 180 x 120 Central cross 200 GKB Socket M24/15-35 GKB Cantilever Parapet Bracket 180 GKB Soffit Formwork Beam GKB Side Formwork Beam Drill- and Pretension Device 45° GKB Anchor Bolt M 24 x 200/10°
Climbing Systems
101731 101773 101774 101776 101776 101778 101779 101799 101813 101823 101829 101854 101856 101857 101858 101859 101860 101861 101862 101916 101927 101928 101929 101930 101931 101934 101935 101936 101937 101940 101964 101986 101995 101995 102018 102018 102021 102023 102031 102031 102098 102099 102109 102110 102111 102120 102184 102185 102186 102187 102188 102190 102193 102195 102196 102197 102210 102217 102219 102220 102251 102317 102327 102328 102329 102390 102394
Scaffolding, Stairs, Working Platforms
128 128 129 129 129 129 129 129 129 130 130 130 130 130 130 130 150 150 334 378 461 462 128 129 130 486 486 486 486 468 468 468 468 468 468 468 468 139 131 131 131 131 131 131 131 131 132 132 132 132 132 132 475 470 468 468 66 89 490 195 487 487 487 487 446 143 574
Bridge- and Tunnel Formwork
VARIO Standard Panel S 250 x 540 VARIO Standard Panel S 250 x 600 VARIO Standard Panel S 187,5 x 240 VARIO Standard Panel S 187,5 x 300 VARIO Standard Panel S 187,5 x 360 VARIO Standard Panel S 187,5 x 420 VARIO Standard Panel S 187,5 x 480 VARIO Standard Panel S 187,5 x 540 VARIO Standard Panel S 187,5 x 600 VARIO Standard Panel S 125 x 240 VARIO Standard Panel S 125 x 300 VARIO Standard Panel S 125 x 360 VARIO Standard Panel S 125 x 420 VARIO Standard Panel S 125 x 480 VARIO Standard Panel S 125 x 540 VARIO Standard Panel S 125 x 600 Platform Strut 246 VARIO Platform Strut 167 VARIO Guardrail Holder GT24/VT20 Standard UVR 100 Standard UVR 100 Top Standard UVH 50 Protection Board 250 Protection Board 187.5 Protection Board 125 Debris Net 2,5 x 10,0 m Debris Net 2,5 x 20,0 m Debris Net 3,0 x 10,0 m Debris Net 3,0 x 20,0 m Decking Gap Filler UD 7/150 Decking Gap Filler UD 7/200 Decking Gap Filler UD 7/250 Decking Gap Filler UD 7/300 Decking Gap Filler UD 11/200 Decking Gap Filler UD 11/250 Decking Gap Filler UD 11/300 Decking Gap Filler UD 11/150 Offset Coupling VVKZ 3/99 Protection Board 100 VARIO Standard Panel S 100 x 600 VARIO Standard Panel S 100 x 540 VARIO Standard Panel S 100 x 480 VARIO Standard Panel S 100 x 420 VARIO Standard Panel S 100 x 360 VARIO Standard Panel S 100 x 300 VARIO Standard Panel S 100 x 240 Protection Board IE 75/75 VARIO Internal Edge S 75/75 x 600 VARIO Internal Edge S 75/75 x 480 VARIO Internal Edge S 75/75 x 360 VARIO Internal Edge S 75/75 x 300 VARIO Internal Edge S 75/75 x 240 Decking Transom Spigot UES End Guardrail UPX 32 Board Transom UHL 72 Board Transom UHL 104 Guardrail Post Holder TRIO Guardrail Post Holder TRIO Board Retainer UPD 60 Tension Relase Plate SB DW 26 Latt. Girder Alu ULA 50/425 HD Latt. Girder Alu ULA 50/525 HD Latt. Girder Alu ULA 50/625 HD Latt. Girder Alu ULA 70/825 HD Landing Link Panel UAB 30 Formwork Joint 21/40 l = 3.00 m Formwork Joint 21/40 l = 3.00 m
Plywood, SystemIndependent Accessories
101246 101247 101248 101249 101250 101251 101252 101253 101254 101255 101256 101257 101258 101259 101260 101261 101269 101273 101290 101306 101306 101309 101311 101318 101319 101347 101348 101349 101350 101360 101372 101373 101375 101378 101379 101381 101394 101395 101404 101405 101406 101407 101408 101409 101410 101411 101464 101465 101467 101469 101470 101471 101576 101579 101588 101591 101592 101592 101596 101621 101656 101657 101658 101659 101671 101706 101706
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 102395 102396 102400 102400 102415 102605 102617 102617 102778 102779 102784 102785 102785 102822 102825 102846 102846 102853 102854 102855 102856 102859 102859 102860 102860 102861 102861 102862 102862 102920 102945 102951 102954 102957 103054 103058 103059 103060 103061 103062 103063 103065 103066 103067 103203 103212 103274 103275 103284 103311 103317 103321 103323 103330 103333 103337 103362 103369 103374 103391 103417 103429 103429 103429 103434 103434 103434 636
GKB Handrail Post 90°/160 GKB Handrail Post 115° Swivel Coupling DK 38/48, galv. Swivel Coupling DK 38/48, galv. Platform VARIO 100/125 with Hatch Deck Link Plate UED Horizontal Brace UBH 300/250 Horizontal Brace UBH 300/250 GKB Side Formwork 60 x 120 GKB Side Formwork 60 x 245 Socket SW 24-1/2" Socket SW 36-3/4" Socket SW 36-3/4" GKB Side Formwork Bracket VARIO Coupling Concrete Finish VKS 99 Ledger Brace UBL 150/150 Ledger Brace UBL 150/150 Inside Panel I 123/120 2R Outside Panel A 128 x 120 2R Inside Panel I 240 x 120 2R Outside Panel A 250 x 120 2R Standard UVR 50 Standard UVR 50 Standard UVR 150 Standard UVR 150 Ledger Brace UBL 250/150 Ledger Brace UBL 250/150 Ledger Brace UBL 200/150 Ledger Brace UBL 200/150 Platform VARIO 100/187.5 VARIO Alignment Clamp VRS Wall Tie UWT 170 Wall Tie UWT 220 Wall Tie UWT 270 Articulated Coupling GKS 60/60 S Prop PEP 20-300 Prop PEP 20-350 Prop PEP 20-400 Prop PEP 20-500 Prop PEP 30-300 Prop PEP 30-350 Prop PEP 30-400 Prop PEP 30-150 Prop PEP 30-250 Platform VARIO 100/100 Lifting Fork 1,75 t / 8,0 m Fin-Ply 18 mm TEI 120/135°, left Fin-Ply 18 mm TEI 120/135°, right Internal Corner TEI 120/135° Fin-Ply 18 mm TEI 120/135° Internal Corner TEI 270/135° Fin-Ply 18 mm TAE 120/135°, left Fin-Ply 18 mm TAE 120/135°, right Outside Corner TEA 120/135° Fin-Ply 18 mm TEA 270/135° Outside Corner TEA 270/135° TRIO Ladder connection Ladder Connector RAPID Ladder Connector SRS Ladder Connector QUATTRO Exit Handrail Post SRS 134 Pallet RP-2 80 x 150, galv. Pallet RP-2 80 x 150, galv. Pallet RP-2 80 x 150, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 120, galv. Pallet RP-2 80 x 120, galv.
513 513 481 577 148 467 382 466 508 508 516 516 550 512 141 381 465 159 158 157 156 378 461 378 461 381 465 381 465 148 141 480 480 480 141 360 360 360 360 360 360 360 360 360 148 336 585 585 54 585 47 585 585 54 585 48 270 249 295 259 294 324 484 536 324 484 536
103443 103444 103518 103518 103606 103606 103606 103606 103606 103606 103607 103716 103718 103718 103718 103718 103718 103718 103718 103721 103724 103724 103724 103724 103724 103724 103737 103737 103740 103800 103844 103845 103850 103865 103868 103868 103871 103871 103874 103874 103877 103877 103886 103886 103889 103889 103892 103892 103898 103898 103903 103903 103906 103906 103915 103915 103918 103918 103922 103922 103925 103925 103928 103928 103929 103929 103932
TSS-Torx 8 x 78, galv. TSS-Torx 8 x 38, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Bolt ISO 4014 M8 x 190-8.8, galv. Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Anchor Bolt PERI MMS 20 x 130 Ladder UEL w. Hook TRS clamp DW 15, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Ladder Hook, galv. Inserting Nut, compl. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. End Ladder 180/2, galv. Universal Coupling UK 70 Universal Coupling UK 70 Bolt ISO 4016 M16 x 280-4.6 MU, galv. Push-Pull Prop RS 1400, galv. Sleeve HBU/HBUD, galv. Hook Strap Uni HBU 24-28 Outside Corner Coupling AKZ 85/85 Guardrail for End Platform VARIO Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.72 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 0.97 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.22 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.47 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.72 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 1.97 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.47 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.22 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 2.97 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.47 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 3.97 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.47 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 4.97 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.47 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-120 l = 5.97 m Steel Waler Universal SRU U-120 l = 2.72 m Steel Waler Universal SRU U-120 l = 2.72 m End Platform VARIO
563 563 137 558 87 208 251 297 273 289 468 265 249 295 270 259 287 393 437 265 248 294 270 259 287 393 141 498 559 204 137 137 140 149 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 135 494 149
637
Formwork Girders Wall Formwork Column Formwork Slab Formwork
548 548 548 548 549 549 549 549 549 549 548 256 566 439 558 567 255 151 151 49 55 43 257 174 151 418 418 414 414 414 174 418 383 51 56 148 148 203 176 251 279 297 272 261 289 547 88 383 369 87 72 85 85 392 362 362 362 362 451 451 451 451 451 86 72 466 450
Shoring Systems
Reverse Plate Twist Drill HM Ø 40 mm Pre-Cutter HM Ø 40 mm Reverse Plate HM Ø 40 mm Reverse Plate Twist Drill VHM Ø 60 mm Torx for Reverse Plate Ø 60 mm Centrepivot VHM Ø 60 mm Reverse Plate VHM 28,5 Ø 60 mm Pre-Cutter VHM Ø 60 mm Torx for Centrepivot Ø 60 mm Torx for Pre-Cutter Ø 60 mm Torx for Reverse Plate/Pre-Cutter Ø 40 mm Bolt Ø 20 x 140, galv. Bolt Ø 20 x 140, galv. Crane Eye BR 2,5 t Bolt ISO 4014 M16 x 120-8.8, galv. Bolt Ø 50 x 330, galv. Chamfer Strip QDL 350 Platform Beam VARIO, left Platform Beam VARIO, right Shaft Element TSE 270 Shaft Element TSE 120 Shaft Element TSE 330 Transportation Wheel QUATTRO Bolt Ø 20 x 102, galv. Platform Bracket VARIO VBK 90 Plywood board 2980 x 470 Plywood board 2400 x 470 Platform ASG 70-100/240 Platform ASG 70-100/298 Bracket ASG 70-100 Cable 2-Strands Ø = 10 mm, l = 4.0m Clip for Console Bracket ASG 70-100 Industrial Deck UDI 25 x 75 Stopend Panel TRIO AT 270 x 5 Stopend Panel TRIO AT 120 x 5 Platform VARIO 100/250 with Hatch Platform VARIO 100/250 Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Base Plate-2 for RSS Router DW 625-E Top Tie TRH Industrial Deck UDI 25 x 100 Industrial Deck UDI 25 x 100 Base Spindle TRH Base Spindle TRH Guardrail TRH 180 Guardrail TRH 270 Main Beam Clamp HD 70 mm, galv. Prop PEP 10-400 A Prop PEP 10-350 A Prop PEP 10-300 A Prop PEP 10-250 A Stringer Frame UZF 200 Stringer Frame UZF 250 Steel Deck UDS 32 x 150 Public Steel Deck UDS 32 x 200 Public Steel Deck UDS 32 x 250 Public Landing w. Ladder TRH 90 Landing w. Ladder TRH 90 Node Brace UBK 250/150 Ledger with Lap UHP 200
Climbing Systems
105311 105317 105318 105326 105327 105328 105330 105331 105346 105347 105367 105400 105400 105401 105402 105435 105448 105480 105484 105523 105524 105525 105791 105822 105823 105841 105842 105843 105844 105845 105905 105907 105925 105953 105978 105985 105986 106000 106000 106000 106000 106000 106000 106000 106000 106081 106087 106092 106092 106126 106126 106147 106148 106183 106429 106432 106433 106434 106582 106583 106585 106586 106587 106608 106608 106624 106626
Scaffolding, Stairs, Working Platforms
177 135 494 173 173 177 172 172 149 386 177 177 135 494 383 142 353 354 499 567 84 338 173 173 137 335 356 249 295 271 260 287 394 437 511 175 457 559 460 382 466 381 465 474 558 457 559 470 230 394 563 175 381 465 381 465 380 456 380 456 175 563 137 558 137 137 561
Bridge- and Tunnel Formwork
FTF Tie plate DW 15, compl. Steel Waler Universal SRU U-140 l = 4.97 m Steel Waler Universal SRU U-140 l = 4.97 m FTF Waling Coupling w. RS-Adaptor FTF Spindle Guide FTF Platform 180 x 60 FTF Bracket w. Spindle FTF 500 Bracket External Corner Platform VARIO Prop section HDSS 210 Steel FTF Tie unit 65, compl. FTF End Guardrail, compl. Extension VARIO 24 U120 Extension VARIO 24 U120 Industrial Deck UDI 25 x 50 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Bolt Ø 21 x 120 Tool Box TRH Extension 60 for Striking Trolley FTF Spindle Guide w. Spindle FTF Waling Coupling w/o RS-Adaptor Hook Strap Uni Double HBUD 24-28 Guardrail Holder SRU/SRZ Guardrail Holder SRU/SRZ Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. Ladder Safety Cage 75, galv. GKB Work cage protection panel FTF Assembly Device Zyl. Bolt ISO 4762 M12 x 60-8.8, galv. Zyl. Bolt ISO 4762 M12 x 60-8.8, galv. Adj. Base Plate UJB 38-27/17 Horizontal Brace UBH 250/200 Horizontal Brace UBH 250/200 Ledger Brace UBL 200/50 Ledger Brace UBL 200/50 Guardrail Coupler UPW Bolt ISO 4014 M20 x 120-8.8, galv. Zyl. Bolt ISO 4762 M12 x 90-8.8, galv. Zyl. Bolt ISO 4762 M12 x 90-8.8, galv. End Guardrail in Advance UPA 72 SK Lead Cone DW 15 Ladder Connector HD 200 TSS-Torx 8 x 58, galv. FTF Clamp Ledger Brace UBL 300/50 Ledger Brace UBL 300/50 Ledger Brace UBL 300/150 Ledger Brace UBL 300/150 Ledger UH 50 Ledger UH 50 Ledger UH 25 Ledger UH 25 FTF Wrench SW 38/1500 TSS-Torx 8 x 44, galv. Bolt ISO 4014 M8 x 150-8.8, galv. Bolt ISO 4014 M8 x 150-8.8, galv. Hook Strap Uni Double HBUD 20-24 Hook Strap Uni HBU 20-24 Nut ISO 7042 M24-8, galv.
Plywood, SystemIndependent Accessories
103942 103943 103943 103944 103945 103946 103949 103981 103992 103993 104017 104018 104027 104027 104029 104031 104031 104031 104031 104031 104032 104050 104070 104083 104096 104131 104131 104132 104132 104132 104132 104132 104132 104132 104181 104195 104278 104278 104305 104356 104356 104391 104391 104412 104477 104528 104528 104618 104643 104646 104647 104744 104762 104762 104766 104766 104779 104779 104780 104780 104803 104892 104929 104929 104930 104931 105032
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 106630 106661 106662 106663 106797 106877 106880 106931 106931 106939 106939 106965 106989 107002 107007 107008 107009 107019 107021 107152 107160 107161 107162 107169 107170 107171 107172 107173 107178 107185 107348 107448 107470 107472 107473 107474 107480 107481 107492 107493 107497 107498 107502 107503 107546 107579 107600 107601 107607 107608 107738 107738 107793 107801 107810 107815 107815 107820 107867 107867 107930 107977 107981 107986 108000 108010 108011 638
Node Brace UBK 200/150 Brace Frame Wall Scaffold Hinge Brace Frame Adaptor SB A0, A, B Brace Frame Adaptor SB 2 Bolt ISO 4014 M24 x 220-10.9, galv. Guardrail Post Holder DOMINO Industrial Deck UDI 25 x 125 Horizontal Brace UBH 250/150 Horizontal Brace UBH 250/150 Pallet RP 110 x 125, painted Pallet RP 110 x 125, painted Pavement Gantry UVG 104/240 Crosshead PEP 10 / VT 20, galv. Industrial Deck UDI 25 x 150 Tension Anchor Connector CB Wall Tension Anchor Corner Platform TRP Retainer Corner Platform TRP Corner Handrail TRP Tripod PEP 10 Connector MP-SRU Compression Brace Head MP/SRU Stringer Frame UZF 150 MULTIPROP Platform 150 x 60 MULTIPROP Platform 225 x 60 MULTIPROP Platform 150 x 60 with Hatch MULTIPROP Platform 225 x 60 with Hatch Ladder 220 x 350, telescopic End Guardrail Post UZE 200 Bolt ISO 4014 M8 x 180-8.8, galv. Coupling MPB 24 Stair Stringer UZS 250/150 Panel TRH 264 x 180 I Panel TRH 264 x 360 I Panel TRH 264 x 360 A Panel TRH 264 x 180 A Panel TRH 264 x 270 I Panel TRH 264 x 270 A Panel TRH 264 x 540 I Panel TRH 264 x 540 A Panel TRH 354 x 180 I Panel TRH 354 x 180 A Panel TRH 354 x 270 I Panel TRH 354 x 270 A Brace TRP 150-210, compl. Bolt Ø 25 x 154, galv. Angle TRH 180 x 6 Angle TRH 270 x 6 Angle TRH 180 x 15 Angle TRH 270 x 15 Ladder 240-360 Ladder 240-360 Landing TRP Shoring Brace UBS 150/100 Shoring Brace UBS 150/150 Horizontal Brace UBH 200/150 Horizontal Brace UBH 200/150 Strap MPB 24 Ledger Brace UBL 150/50 Ledger Brace UBL 150/50 Standard UVR 300 Public Gap Filler UZD 150 x 37 Gap Filler UZD 150 x 16 Gap Filler UZD 150 x 31 Landing Brace UZB 150 Gap Filler UZD 200 x 16 Gap Filler UZD 250 x 16
466 196 196 197 558 105 383 382 466 484 537 472 362 383 426 426 70 70 70 363 353 353 451 349 349 349 349 350 451 137 354 450 81 80 83 83 80 83 79 82 76 78 76 78 71 566 84 84 84 84 72 152 73 383 383 382 466 355 381 465 455 454 453 454 452 453 453
108034 108053 108068 108108 108114 108117 108120 108129 108129 108135 108135 108135 108135 108135 108135 108135 108136 108162 108172 108179 108189 108190 108191 108204 108213 108214 108218 108225 108339 108360 108380 108387 108412 108536 108540 108544 108566 108568 108689 108719 108785 108795 108808 108830 108834 108842 108855 108856 108869 108870 108958 108983 108984 108995 109010 109017 109105 109198 109208 109219 109469 109470 109471 109472 109563 109610 109612
Landing Brace UZB 90° Guardrail Post RGP 120 Toeboard Wood UPT-2 150 Table Lift Truck PTL 1250 Toeboard Wood UPT-2 200 Toeboard Wood UPT-2 250 Toeboard Wood UPT-2 300 Tie Rod Spanner DW 15 Tie Rod Spanner DW 15 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Kicker AV 210 Glue for Concrete Cones-2 / 5kg Set Bearing Box BR Landing Brace UZB 200 Landing Brace UZB 250 Stair Guardrail UZG 250/150 Landing Guardrail UZG 150 Landing Transom UZL 150 Toeboard Wood UPT-2 400 Brace Connector MPB 24 Guardrail Filler Guardrail Connector, Straight Kicker TRH 135 Quick Strap MPB 24/GT 24 Anchor Sleeve M24, Special, Stainless Steel Industrial Deck UDI 25 x 200 Guardrail Connector, Corner Landing Cover Plate UZD 150/25 End Guardrail Post UZE 150 Industrial Deck UDI 25 x 250 End Guardrail Post UZE 250 Ladder TRH 264 Ladder TRH 354 Industrial Deck UDI 25 x 300 Tie Rod Spanner TRH SW 22 Outside Corner TRH 330 - 90 x 90 Rock Anchor HB DW 15 Outside Corner TRH 420 - 90 x 90 Inside Corner TRH 420 - 66 x 66 F.H. Bolt DIN603 M8 x 180 MU, galv. Inside Corner TRH 330 - 66 x 66 Stopend Panel DOMINO AT 250 x 5 Stopend Panel DOMINO AT 125 x 5 Sleeve for Cavity Wall Bracket ASG Cavity Wall Bracket ASG Glue Component A-2 Panel w. Corner Platform TRH 264 x 270 I Panel w. Corner Platform TRH 354 x 270 I Extension Waler TRH 165 Guardrail Frame RGP 120 Anchor Waler U160 l = 0,55 m Ladder Base 30 adjustable, galv. Stair Step UAR 100 End Step UAE 100 Stair Stringer UA 250/200 Climbing Rail RCS 248 Climbing Rail RCS 348 Climbing Rail RCS 498 Climbing Rail RCS 748 Head Spindle Locking Device UJH Climbing Rail RCS 998 Bolt ISO 4014 M24 x 130-8.8, galv.
453 530 469 335 469 469 469 217 551 205 250 279 296 272 261 289 231 440 452 452 452 453 452 469 356 456 456 86 355 514 383 456 454 451 383 451 85 85 383 88 84 216 79 77 432 82 98 102 416 416 232 81 77 88 530 195 436 448 449 449 495 495 495 495 377 495 558
639
Formwork Girders Wall Formwork Column Formwork Slab Formwork
315 317 496 496 315 541 316 537 317 499 567 97 101 98 276 316 539 500 361 361 361 361 361 361 361 361 361 495 23 197 19 276 276 277 15 15 15 16 16 20 23 25 27 20 20 148 16 20 21 21 24 24 24 24 25 26 26 36 35 33 33 17 33 332 63 31 18
Shoring Systems
Head Spindle GTR 38-70/50 Corner Platform GCP, complete Climbing Rail Angle Connector RCS Climbing Rail Connector RCS 97 Extension GF 10 Extension GF 10 Palett RP 80 x 110, galv. Palett RP 80 x 110, galv. Platform GIP 200, complete Bolt Ø 26 x 120 Bolt Ø 26 x 120 Shaft Element DSE 275 Shaft Panel DSE 125 Spindle Shaft Element DSE Column Panel LICO 700 x 3000 Palett GF 85 x 210, galv. Palett GF 85 x 210, galv. Hook Strap Uni HBU 24-26 U200 PEP Frames PRK 62,5 PEP Frames PRK 75 PEP Frames PRK 137,5 PEP Frames PRK 150 PEP Frames PRK 201,5 PEP Frames PRK 225 PEP Frames PRK 230 PEP Frames PRK 266 PEP Frames PRK 296 Climbing Rail Connector RCS 40 Articulated Corner MXGA 120 Wall Scaffold Hinge SB double Articulated Corner MXGA 270 Column Panel LICO 700 x 1000 Column Panel LICO 700 x 500 Chamfer Strip LICO I = 3.00 m Element MX 270 x 240 Element MX 270 x 120 Element MX 270 x 90 Element MX 270 x 45 Element MX 270 x 30 Element MX 120 x 240 Element MX 90 x 240 Elements MX 60 x 240 Element MX 30 x 240 Element MX 120 x 120 Element MX 120 x 90 Handrail Post Holder VARIO Element MX 270 x 60 Element MX 120 x 60 Element MX 120 x 45 Element MX 120 x 30 Element MX 90 x 90 Element MX 90 x 60 Element MX 90 x 45 Element MX 90 x 30 Elements MX 60 x 60 Elements MX 60 x 45 Elements MX 60 x 30 Nut Sealing Sleeve MX Ø 16 Sealing Sleeve MX Ø 16 Wingnut MX Anchors MX 20-30 Inside Corner MXI 270 x 60 Anchors MX 30-40 Swivel Head SRU TRIO Stripping Bar TRIO Stripping Bar Outside Corner MXA 270 x 35
Climbing Systems
111291 111379 111382 111390 111392 111392 111396 111396 111566 111567 111567 111603 111655 111665 111683 111738 111738 111806 111811 111812 111813 111814 111815 111816 111817 111818 111819 111833 111850 111866 111872 111957 111964 111975 112006 112022 112045 112078 112090 112104 112115 112126 112133 112143 112152 112159 112200 112221 112232 112239 112252 112259 112265 112271 112280 112286 112292 112338 112342 112386 112387 112419 112464 112498 112588 112588 112667
Scaffolding, Stairs, Working Platforms
376 497 495 497 313 255 255 254 254 500 501 312 312 313 314 426 469 500 469 469 469 469 313 137 563 560 313 232 380 456 106 331 497 312 469 314 314 559 559 437 223 90 232 552 312 90 227 214 498 315 541 497 379 462 482 377 447 447 447 446 446 352 355 287 146 386 497
Bridge- and Tunnel Formwork
Spindle Head SRU Heavy Duty Spindle SLS 320/420 Climbing Rail Connector RCS 33 Heavy Duty Spindle SLS 380/480 Prophead GFH, galv. QUATTRO Frame QES 50 QUATTRO Frame QES 125 QUATTRO Frame QES 275 QUATTRO Frame QES 350 Spacer M20-82 Spacer M24-82 Standard Element GFP 200 x 100 Filler Element Cross GFC 200 x 100 Shuttering Aid GFA Traverse GFT Waler Fixation U100-U120 Toeboard Steel UPY 104 Scaffold Tube Adapter RCS Ø 48 Toeboard Steel UPY 150 Toeboard Steel UPY 200 Toeboard Steel UPY 250 Toeboard Steel UPY 300 Wall Holder GFW TSS-Torx 6 x 60, ZKS, galv. TSS-Torx 6 x 60, ZKS, galv. Loop Bolt M20, right, galv. Guardrail GF 100 Glue Component B-2 Ledger UH 125 Ledger UH 125 Stopend Tie-2 DSA Table Swivel Head, Upper Part-2 Spindle Adapter SLS/RCS Filler Element Longitudinal GFL 150 x 100 Toeboard Steel UPY 72 Clamp GFK Tension Sleeve GFO Bolt ISO 4017 M12 x 140-8.8, galv. Bolt ISO 4017 M12 x 240-8.8, galv. Hatch 55 x 60, foldable Tie Load Gauge 160 kN Cone Spanner TRH Cone Spanner TRH Cone Spanner TRH Filler Element Longitudinal GFL 183 x 20 Sealing Cone TRH 55 Sealing Cone TRH 55 Tie Yoke SRU Tie Yoke Head SRU Stacking Device GRIDFLEX, galv. Stacking Device GRIDFLEX, galv. Heavy Duty Spindle SLS 40/80 Locking Pin Ø 48 Locking Pin Ø 48 Locking Pin Ø 48 Section Spindle UJK 38-110/41 Staircase UAS 75 x 150/50 T, Alu Staircase UAS 75 x 150/50, Alu Staircase UAS 75 x 150/100, Alu Staircase UAS 75 x 250/200, Alu Staircase UAS 75 x 300/200, Alu MULTIPROP Bolt with Nut MULTIPROP Bolt with Nut Ladder Connector VARIO, adjustable Crane Hook 2 t / GT 24 Prop Section HDSS 90 Steel Angle Connector RCS/SRU
Plywood, SystemIndependent Accessories
109630 109726 109743 109785 109910 109923 109924 109925 109926 110022 110023 110038 110040 110044 110045 110059 110076 110084 110160 110176 110208 110211 110238 110272 110272 110281 110326 110345 110347 110347 110406 110422 110477 110486 110526 110556 110595 110598 110599 110608 110612 110634 110634 110634 110646 110675 110675 110755 110756 110939 110939 111035 111053 111053 111053 111072 111087 111095 111103 111117 111124 111142 111142 111165 111238 111276 111283
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 112689 112715 112718 112726 112761 112765 112778 112782 112783 112788 112806 112813 112814 112815 112816 112822 112830 112837 112849 112850 112887 112888 112889 112918 112919 112920 112921 112926 112937 112937 112986 113007 113012 113018 113019 113183 113203 113246 113247 113247 113255 113255 113347 113348 113349 113350 113686 113744 113799 113829 113832 113833 113834 113835 113836 113837 113838 113839 113847 113933 114034 114036 114082 114084 114107 114107 114107 640
Inside Corner MXI 120 x 60 Inside Corner MXI 90 x 60 PEP Frames PRK 200 Inside Corner MXI 60 x 60 Outside Corner MXA 120 x 35 Node Brace UBK 125/200 Outside Corner MXA 60 x 35 Table Module SRU 200/215 x 500 Table Module SRU 200/265 x 500 PEP Frames PRK 210 Outside Corner MXA 270 x 45 PEP Frames PRK 100 PEP Frames PRK 120 Clamping Plate M16 Nova Grip Spindle Spreader HD Outside Corner MXA 60 x 90 Outside Corner MXA 120 x 45 Outside Corner MXA 60 x 45 Multi Panel MXM 270 x 60 Multi Panel MXM 120 x 60 Outside Corner MXA 270 x 90 Outside Corner MXA 120 x 90 Outside Corner MXA 90 x 90 External Bracket SRU/UZ Bottom Frame SRU/UZ Connector SRU/UZ Internal Bracket SRU/UZ Node Brace UBK 100/200 Sealing Cone MX 55 Sealing Cone MX 55 Lifting Beam RCS 10 t Zyl. Bolt ISO 4762 M30 x 70-8.8, galv. Bolt Ø 20 x 260, galv. Cone MX DR 22 Stacking Device MX Spanner for Sealing Sleeve MX Ø 16 Articulated Corner MXGI 270 Articulated Corner MXGI 120 Bolt Ø 25 x 260, mont. Bolt Ø 25 x 260, mont. Bolts SB-MAXIMO, galv. Bolts SB-MAXIMO, galv. Washer ISO 7094 100 HV A 8, galv. Washer ISO 7094 100 HV A 12, galv. Washer ISO 7094 100 HV A 16, galv. Washer ISO 7094 100 HV A 20, galv. Bolt ISO 4014 M24 x 200-8.8, galv. Climbing Rail Connector RCS 79 Frame MRK 180 PERI UP Assembly Certificate, F PERI UP Scaffold Tag PERI UP Assembly Certificate, D PERI UP Assembly Certificate, EX PERI UP Assembly Certificate, CDN PERI UP Assembly Certificate, ES PERI UP Assembly Certificate, PT PERI UP Assembly Certificate, PL PERI UP Assembly Certificate, CZ Anchors MX 15-25 Adjusting Unit VARIOKIT MAXIMO Waler MAR 85-2 MAXIMO Waler MAR 170-2 Counterplate RCS DW 20 Counterplate RCS DW 26 Sleeve SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv.
21 25 361 26 22 466 27 332 332 361 18 361 361 562 498 26 22 27 17 21 18 22 25 333 333 333 332 466 35 227 502 559 568 35 29 36 19 23 569 568 32 182 561 561 561 561 558 496 349 490 489 490 490 490 490 490 490 490 33 499 27 28 497 497 32 182 184
114124 114142 114142 114158 114158 114166 114179 114180 114181 114181 114191 114191 114212 114212 114248 114258 114290 114290 114299 114300 114301 114328 114349 114394 114426 114445 114452 114457 114464 114470 114478 114486 114496 114503 114509 114583 114595 114595 114607 114613 114613 114619 114621 114629 114629 114632 114632 114635 114638 114638 114641 114641 114641 114645 114645 114645 114648 114648 114648 114651 114651 114651 114654 114727 114731 114797 114797
Ledger UH 72 Wall Thickness Comp. MX 120 x 10, Alu Wall Thickness Comp. MX 120 x 10, Alu Screw on Cone-2 M24/DW 20, galv. Screw on Cone-2 M24/DW 20, galv. Climbing Rail RCS 148 Stair Step UAR 125 End Step UAE 125 Wall Thickness Comp. MX 120 x 6 Wall Thickness Comp. MX 120 x 6 Wall Thickness Comp. MX 120 x 5 Wall Thickness Comp. MX 120 x 5 Wall Thickness Comp. MX 120 x 4 Wall Thickness Comp. MX 120 x 4 Element MX 330 x 120 Element MX 330 x 90 Tie Rod Spanner MX Tie Rod Spanner MX Guardrail Post GKB PVC Plug MX Ø 17,5 - 22 Platform Beam RCS/SRU 113 Guardrail Post RCS/SRU 184 Edge Profile UH 100 Wall Thickness Comp. MX 330 x 10, Alu Element MX 330 x 240 Element MX 330 x 60 Element MX 330 x 45 Element MX 330 x 30 Multi Panel MXM 330 x 60 Inside Corner MXI 330 x 60 Outside Corner MXA 330 x 45 Outside Corner MXA 330 x 35 Stopper MX 50 MF Stopper MX 50 OF Stopper MX 84 MF Articulated Corner MXGI 330 Ledger UH 50 Ledger UH 50 Articulated Corner MXGA 330 Ledger UH 25 Ledger UH 25 Stud Spanner MAXIMO Edge Profile UH 125 Ledger UH 75 Ledger UH 75 Ledger UH 100 Ledger UH 100 Ledger UH 104 Ledger UH 125 Ledger UH 125 Ledger UH 150 Ledger UH 150 Ledger UH 150 Ledger UH 200 Ledger UH 200 Ledger UH 200 Ledger UH 250 Ledger UH 250 Ledger UH 250 Ledger UH 300 Ledger UH 300 Ledger UH 300 Ledger UH 400 Bolt ISO 4017 M20 x 100-8.8, galv. Stair Stringer UA 250/200 Magnet Cone Spanner MX Magnet Cone Spanner MX
463 23 19 433 407 495 448 449 23 19 23 19 23 19 10 11 34 551 517 34 501 501 449 14 10 11 11 12 12 12 13 13 34 34 34 14 379 455 14 379 455 35 449 379 455 379 455 463 379 455 379 463 455 379 463 455 379 463 455 379 455 463 455 559 449 35 232
641
Formwork Girders Wall Formwork Column Formwork Slab Formwork
584 584 153 561 559 558 560 133 562 558 558 558 558 559 559 558 560 559 558 558 560 560 136 432 565 558 559 563 559 558 558 486 486 565 558 569 418 419 565 560 187 560 560 486 457 561 558 569 486 565 561 562 561 560 569 561 561 558 558 405 568 457 558 558 558 564 561
Shoring Systems
Corner Profile TE 120 Corner Profile TE 60 Plate Fl 50 x 20 x 120, ESP Washer ISO 7089 200 HV, A 20, galv. Bolt ISO 4017 M20 x 40-8,8, galv. Bolt ISO 4014 M20 x 200-8.8, galv. Nut ISO 4032 M24-10, galv. End Plate SRZ Washer R11 DIN 440, galv. Bolt ISO 4014 M16 x 100-8.8, galv. Bolt ISO 4014 M12 x 80-8.8, galv. Bolt ISO 4014 M12 x 60-8.8, galv. Bolt ISO 4014 M16 x 80-8.8, galv. Bolt ISO 4017 M12 x 40-8.8, galv. Bolt ISO 4017 M16 x 45-8.8, galv. Bolt ISO 4014 M20 x 90-8.8, galv. Nut ISO 4032 M16-8, galv. Bolt ISO 4017 M16 x 30-8.8, galv. Bolt ISO 4014 M16 x 130-8.8, galv. Bolt ISO 4014 M16 x 110-8.8, galv. Nut ISO 4032 M10-8, galv. Nut ISO 4032 M16-10, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. F.H. Bolt DIN 603 M8 x 100 MU, galv. Bolt ISO 4014 M10 x 100-8.8, galv. Bolt ISO 4017 M16 x 50-8.8, galv. Selftapping Screw 5,5 x 45 TX 30, galv. Bolt ISO 4017 M12 x 25-8.8, galv. Bolt ISO 4014 M8 x 60-8.8, galv. Bolt ISO 4014 M8 x 100-8.8, galv. T-Head Bolt M14 x 98/110, galv. T-Head Bolt M14 x 63/75, galv. F.H. Bolt DIN 603 M8 x 45 MU, galv. Bolt ISO 4014 M16 x 60-8.8, galv. Cotter Pin 7, galv. Nail 3 x 80 F.H. Bolt DIN 603 M8 x 60 MU, galv. F.H. Bolt DIN 603 M8 x 60 MU, galv. Nut ISO 4032 M12-8, galv. Nut ISO 4032-M20-8, galv. Nut ISO 4032-M20-8, galv. Nut ISO 4032 M30-10, galv. Flanged Nut M14 - SW 19, yellow Nut ISO 7042 M12-8, galv. Nut ISO 7042 M12-8, galv. Bolt ISO 4014 M10 x 80-8.8, galv. Cotter Pin 8, galv. T-Head Bolt M14 x 75/87, galv. F.H. Bolt DIN 603 M8 x 65 MU, galv. Washer ISO 7089 200 HV, A 24, galv. Washer DIN 434 18, galv. Washer ISO 7093-1 200 HV, A 16, galv. Loop Bolt M20, left, galv. Sleeve ISO 8752 5 x 35, galv. Nut ISO 7042 M8-8, galv. Washer ISO 7089 200 HV, A 16, galv. Bolt ISO 4014 M20 x 130-8.8, galv. Bolt ISO 4014 M16 x 70-8.8, galv. Bolt Ø 16 x 150, galv. Bolt Ø 25 x 240, SKS, galv. Bolt ISO 4014 M12 x 70-8.8, galv. Bolt ISO 4014 M12 x 70-8.8, galv. Bolt ISO 4014 M16 x 90-8.8, galv. Bolt ISO 4014 M10 x 50-8.8, galv. Rivet DIN 7337 A 4,8 x 23, Alu Nut ISO 7042 M6-8, galv.
Climbing Systems
700845 700846 701991 706454 706458 706462 706488 710001 710139 710219 710220 710221 710222 710224 710225 710226 710229 710231 710232 710233 710234 710238 710240 710240 710240 710242 710252 710262 710266 710284 710285 710290 710293 710295 710299 710304 710312 710326 710326 710330 710334 710334 710336 710340 710381 710381 710593 710618 710702 710709 710874 710880 710886 711060 711063 711071 711074 711078 714093 715357 715585 720610 720610 721729 721817 722083 722086
Scaffolding, Stairs, Working Platforms
551 467 467 382 382 382 382 467 14 14 14 382 382 382 382 382 382 382 382 216 502 277 30 68 540 562 381 381 30 68 447 17 383 22 25 26 13 29 216 503 216 502 316 541 316 541 383 381 29 490 278 278 278 361 498 367 375 515 515 34 277 10 576 382 466 584 584
Bridge- and Tunnel Formwork
Magnet Cone Spanner MX Access Deck UAL 64 x 200/3 Access Deck UAL 64 x 300/3 Ledger Brace UBH Flex 100/100 Ledger Brace UBH Flex 250/100 Ledger Brace UBH Flex 200/100 Ledger Brace UBH Flex 150/100 Access Deck UAL 64 x 250/3 Wall Thickness Comp. MX 330 x 5 Wall Thickness Comp. MX 330 x 4 Wall Thickness Comp. MX 330 x 6 Ledger Brace UBH Flex 300/100 Ledger Brace UBH Flex 150/150 Ledger Brace UBH Flex 200/200 Ledger Brace UBH Flex 250/200 Ledger Brace UBH Flex 300/200 Ledger Brace UBH Flex 250/250 Ledger Brace UBH Flex 300/250 Ledger Brace UBH Flex 300/300 Bracing Shoe RCS DW 15 Bracing Shoe RCS DW 15 Lifting Pin LICO Stacking Device MAXIMO, galv. Stacking Device MAXIMO, galv. Stacking Device MAXIMO, galv. Clamping Plate M16 Nova Grip Ledger Brace UBL 100/50 Ledger Brace UBL 100/200 Lifting Hook MAXIMO 1.5 t Lifting Hook MAXIMO 1.5 t Waler on Staircase UAS 75 Inside Corner MXI 270 x 50/20 Shoring Brace UBS 200/150 Inside Corner MXI 120 x 50/20 Inside Corner MXI 90 x 50/20 Inside Corner MXI 60 x 50/20 Inside Corner MXI 330 x 50/20 Tension and Compression Brace MX Articulated Spanner RCS DW 15 Articulated Spanner RCS DW 15 Eye Nut RCS DW 15 Eye Nut RCS DW 15 Tension Strap Rail GF 125 Tension Strap Rail GF 125 Tension Strap Rail GF 92 Tension Strap Rail GF 92 Shoring Brace UBS 200/100 Ledger Brace UBL 100/150 Bulkhead Tie MX DW20 PERI UP Assembly Certificate, TR Concreting Platform LICO Concreting Platform LICO, Frame Concreting Platform LICO, Cover PEP Frames PRK 180 Spindle Adapter SKS/RCS Head Spindle TR 38-70/50 Head Spindle TR 38-70/50 Cone FRC for Anchor Sleeve Plug 32 mm Fibre Reinforced Concrete Plug MXM Ø 21 Spanner LICO Element MX 330 x 270 Angle Bracket 90° Horizontal Brace UBH 300/200 Horizontal Brace UBH 300/200 Corner Profile TE/TAE 270 Corner Profile TAE 90
Plywood, SystemIndependent Accessories
114797 114811 114812 114818 114819 114820 114821 114825 114826 114842 114846 114892 114912 114916 114920 114924 114928 114932 114936 114997 114997 115019 115058 115058 115058 115145 115156 115157 115168 115168 115189 115255 115291 115299 115307 115315 115338 115350 115375 115375 115378 115378 115385 115385 115427 115427 115504 115513 115640 115739 115894 115895 115896 115980 116039 116081 116081 116233 116234 116353 116432 116454 123478 123483 123483 700843 700844
Service
Numerical Index
Formwork Girders Wall Formwork Column Formwork Slab Formwork Shoring Systems Climbing Systems Scaffolding, Stairs, Working Platforms Bridge- and Tunnel Formwork Plywood, SystemIndependent Accessories Service
Numerical Index 722169 722318 722457 722859 723439 723910 724500 725462 725574 727056 727057 727058 727059 727060 727061 727112 727112 727112 727112 727165 727165 727165 730050 730050 730050 740251 740252 740252 740255 740255 740256 740257 740257 740270 740270 740271 740271 740273 740275 740276 740276 740277 740278 740279 740280 740280 740284 740284 740285 740286 740287 740308 740309 740310 740322 740323 740324 740454 740455 740456 740457 740458 740459 740460 740461 740462 740463 642
Bolt ISO 4014 M16 x 140-8.8, galv. Rivet DIN 7337 A 6 x 10, Steel Sleeve ISO 8752 10 x 70, galv. Bolt ISO 4014 M8 x 140-8.8, galv. F.H. Bolt DIN 603 M8 x 80 MU, galv. Crane Eye A18 Bolt Ø 20 x 42, galv. F.H. Bolt DIN 603 M8 x 140 MU, galv. Washer ISO 7089 200 HV, A 14, galv. EFD Paint red, 1 L EFD Paint orange, 5 L EFD Paint yellow, 1 L EFD Paint yellow, 5 L EFD Paint white, 1 L EFD Paint white, 5 L Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm Drill Bit HSS DIN 338, Ø 5,1 mm PACTAN Sealing, brown, 310 ccm PACTAN Sealing, brown, 310 ccm PACTAN Sealing, brown, 310 ccm Rivet DIN 7337 B 5 x 30, Alu Rivet DIN 7337 B 5 x 30, Alu Rivet DIN 7337 B 5 x 30, Alu Fin-Ply 18 mm TR 270 x 120 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA 270 x 90 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR, TRA, THP 270 x 60 Fin-Ply 18 mm TR 270 x 72 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TR, TRA 270 x 30 Fin-Ply 18 mm TRM, TAM 270 x 72 Fin-Ply 18 mm TRM, TAM 270 x 72 Fin-Ply 18 mm TRM, TAM 270/330 Fin-Ply 18 mm TRM, TAM 270/330 Fin-Ply 18 mm TRM 120 x 72 l = 286 mm Fin-Ply 18 mm TR 120 x 120 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 120 x 90, TRA 90 x 120 Fin-Ply 18 mm TR 120 x 72 Fin-Ply 18 mm TR 120 x 60 Fin-Ply 18 mm TR 120 x 30 Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TRM 120, TAM 90 l = 740 mm Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR 60 x 90, TRA 90 x 60 Fin-Ply 18 mm TR 60 x 72 Fin-Ply 18 mm TR, THP 60 x 60 Fin-Ply 18 mm TR 60 x 30 Fin-Ply 18 mm TRS 270 x 90 Fin-Ply 18 mm TRS 120 x 90 Fin-Ply 18 mm TRS 60 x 90 Fin-Ply 18 mm TR/4 330 x 24 Fin-Ply 18 mm TR 270 x 24 Fin-Ply 18 mm TR 120 x 24 Fin-Ply 15 mm D 250 x 100 Fin-Ply 15 mm D 250 x 75 Fin-Ply 15 mm D 250 x 50 Fin-Ply 15 mm D 250 x 25 Fin-Ply 15 mm D 125 x 100 Fin-Ply 15 mm D 125 x 75 Fin-Ply 15 mm D 125 x 50 Fin-Ply 15 mm D 125 x 25 Fin-Ply 15 mm D 75 x 100 Fin-Ply 15 mm D 75 x 75
558 564 569 558 565 174 256 565 561 584 584 584 584 584 584 555 583 595 590 583 595 591 564 583 590 585 586 585 586 585 585 585 586 585 586 585 586 585 585 586 585 585 585 585 585 586 586 585 585 585 585 585 585 585 586 585 585 591 591 591 591 591 591 591 591 591 591
740464 740465 740467 740468 740469 740497 740498 740499 740522 740523 740524 740525 740526 740527 740528 740529 740531 740770 745300 745303 745305 745319 745321 745322 745323 745324 745324 745329 745340 745341 745342 745343 745344 745345 745346 745347 745348 745349 745560 745560 745569 745570 745580 745645 750040 750076 750076 750132 750133 750134 750135 750303 750303 750303 750330 750350 780155 780302 780304 780305 780305 780353 780354 780356 780357 780702 781053
Fin-Ply 15 mm D 75 x 50 Fin-Ply 15 mm D 75 x 25 Fin-Ply 15 mm DM 250 x 75 Fin-Ply 15 mm DM 125 x 75 Fin-Ply 15 mm DM 75 x 75 Fin-Ply 15 mm D 250 x 40 Fin-Ply 15 mm D 250 x 35 Fin-Ply 15 mm D 250 x 30 Fin-Ply 15 mm D 250 x 20 Fin-Ply 15 mm D 125 x 40 Fin-Ply 15 mm D 125 x 35 Fin-Ply 15 mm D 125 x 30 Fin-Ply 15 mm D 125 x 20 Fin-Ply 15 mm D 75 x 40 Fin-Ply 15 mm D 75 x 35 Fin-Ply 15 mm D 75 x 30 Fin-Ply 15 mm D 75 x 20 Fin-Ply 18 mm TRA 90 x 30 Fin-Ply 18 mm TR 270 x 240, 2 Sheets Fin-Ply 18 mm TR 270 x 240 Fin-Ply 18 mm TR 120 x 240 Fin-Ply 18 mm TAE 90/2 Fin-Ply 18 mm TE 60/2 Fin-Ply 18 mm TE 120/2, left Fin-Ply 18 mm TE 120/2, right Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TE 270/2, TAE 270/2 Fin-Ply 18 mm TRM, TRM/4 330 l = 998 mm Fin-Ply 18 mm TR/4 330 x 240, 2 Sheets Fin-Ply 18 mm TR/4 330 x 120 Fin-Ply 18 mm TR/4 330 x 90 Fin-Ply 18 mm TR/4 330 x 72 Fin-Ply 18 mm TR/4 330 x 60 Fin-Ply 18 mm TR/4 330 x 30 Fin-Ply 18 mm TE/4 330, right Fin-Ply 18 mm TE/4 330, left Fin-Ply 18 mm TRM/4 330 x 72 l = 383 mm Fin-Ply 18 mm TRM/4 330 x 72 l = 531 mm Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 270, TAE 270 Fin-Ply 18 mm TE 120, left Fin-Ply 18 mm TE 120, right Fin-Ply 18 mm TE 60 Fin-Ply 18 mm TAE 90 Spring 4,6 x 18 x 1338 mm F.H. Bolt DIN 603 M8 x 90 MU, galv. F.H. Bolt DIN 603 M8 x 90 MU, galv. Sleeve 18 -DW 20, Base Piece Sleeve 18 -DW 20, Head Piece Plastic Sleeve Corner DW 20 Plastic Sleeve DW 20 Stacking Aid TRIO DW 20 Stacking Aid TRIO DW 20 Stacking Aid TRIO DW 20 Bolt ISO 4014 M12 x 100-8.8, galv. Washer ISO 7093-1 200 HV, A 12, galv. Bolt ISO 4014 M16 x 160-8.8, galv. Rivet DIN 7337 B 5 x 25, Alu Rivet DIN 7337 A 5 x 12, Alu Rivet DIN 7337 B 5 x 20, GAV Rivet DIN 7337 B 5 x 20, GAV Bolt ISO 4016 M8 x 25-4.6 MU, galv. Washer ISO 7089 200 HV, A 8, galv. Nut ISO 7042 M10-8, galv. Bolt ISO 4017 M20 x 50-8.8, galv. Washer ISO 7089 200 HV, A 12, galv. Nut ISO 7042 M20-8, galv.
591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 591 586 585 585 585 586 585 585 585 585 586 586 586 586 586 586 586 586 586 586 586 586 585 586 585 585 585 586 584 513 565 584 584 584 584 69 268 584 558 561 558 564 564 564 595 559 561 561 559 561 561
Bridge- and Tunnel Formwork
Scaffolding, Stairs, Working Platforms
Climbing Systems
Shoring Systems
Slab Formwork
Column Formwork
Wall Formwork
Bolt ISO 4014 M20 x 160-8.8, galv.
Plywood, SystemIndependent Accessories
781054
Formwork Girders
558
643
Service
Numerical Index
644
645
PERI International
42
19 20 22
32 34
18 38 11
52 6 01 PERI GmbH Rudolf-Diesel-Strasse 89264 Weissenhorn info @ peri.com www.peri.com
21
1
5
17 2
46 30
3
16
13
29
28
9 53
24
48
4
41 61 33
02 France PERI S.A.S. 77109 Meaux Cedex
[email protected] www.peri.fr
09 Italy PERI S.p.A. 20060 Basiano (MI)
[email protected] www.peri.it
16 Austria PERI Ges.mbH 3134 Nußdorf ob der Traisen offi
[email protected] www.peri.at
23 Korea PERI (Korea) Ltd. Seoul 135-080
[email protected] www.perikorea.com
29 Slovania PERI SLOWENIEN 2000 Maribor
[email protected] www.peri.de
03 Switzerland PERI AG 8472 Ohringen
[email protected] www.peri.ch
10 Japan PERI Japan K.K. Tokyo 103-0015
[email protected] www.perijapan.jp
17 Czech Republic PERI spol. s r.o. 252 42 Jesenice
[email protected] www.peri.cz
24 Portugal PERIcofragens Lda. Linda-a-Pastora 2790-326 Queijas
[email protected] www.peri.pt
30 Slovakia PERI spol. s r.o. 903 01 Senec
[email protected] www.peri.sk
04 Spain PERI S.A. Sociedad Unipersonal 28110 Algete/Madrid
[email protected] www.peri.es
11 United Kingdom/Ireland PERI Ltd. Rugby, CV23 0AN
[email protected] www.peri.ltd.uk
18 Denmark PERI Danmark A/S 2670 Greve
[email protected] www.peri.dk
05 Belgium/Luxembourg N.V. PERI S.A. 1840 Londerzeel
[email protected] www.peri.be
12 Turkey PERI Kalıp ve İskeleleri Kıraç - Büyükçekmece/ Istanbul 34500
[email protected] www.peri.com.tr
19 Finland PERI Suomi Ltd. Oy 05460 Hyvinkää info@perisuomi.fi www.perisuomi.fi
06 Netherlands PERI B.V. 5480 AH-Schijndel
[email protected] www.peri.nl
13 Hungary PERI Kft.. 1181 Budapest
[email protected] www.peri.hu
14 Malaysia 07 USA PERI Formwork Malaysia PERI Formwork Systems, Inc. 43300 Seri Kembangan, Elkridge, MD 21075 Selangor DE
[email protected] [email protected] www.peri-usa.com www.perimalaysia.com 08 Indonesia PT Beton Perkasa Wijaksana 15 Singapore PERI ASIA Pte. Ltd Jakarta 10210 Singapore 387355
[email protected] [email protected] www.peri.de www.periasia.com
646
20 Norway PERI NORGE AS 3036 Drammen
[email protected] www.peri.no 21 Poland PERI Polska Sp. z o.o. 05-860 Płochocin
[email protected] www.peri.pl.pl 22 Sweden PERIform SVERIGE AB 30013 Halmstad
[email protected] www.periform.se
25 Argentina PERI S.A. (1625) Escobar/Prov. Bs. As.
[email protected] www.peri.com.ar 26 Brazil PERI Formas e Escoramentos Ltda. CEP 06730-000 Vargem Grande Paulista São Paulo
[email protected] www.peribrasil.com.br 27 Chile PERI Chile Ltda. Colina, Santiago de Chile
[email protected] www.peri.cl 28 Romania PERI România SRL 077015 Baloteşti - ILFOV
[email protected] www.peri.ro
31 Australia PERI Australia Pty. Ltd. Glendenning NSW 2761
[email protected] www.periaus.com.au 32 Estonia PERI AS 76401 Saku vald Harjumaa
[email protected] www.peri.ee 33 Greece PERI Hellas Ltd. 194 00 Koropi
[email protected] www.perihellas.gr 34 Latvia PERI SIA 1057 Riga
[email protected] www.peri-latvija.lv 35 United Arab Emirates PERI (L.L.C.) Dubai
[email protected] www.perime.com
12
44
36
43 7
50 39 60
49
47
23
51
37 40 57 56
54
58
59 35
10
55
63 14 15 8 26
62
27
31
45 25
42 Iceland 36 Canada MEST ltd., PERI Formwork Systems, Inc. 220 Hafnarfjordur Bolton, Ontario
[email protected] L7E 1K1 www.mest.is
[email protected] www.peri.ca 43 Kazakhstan TOO PERI Kazakhstan 37 Libanon 050010 Almaty PERI GmbH
[email protected] Beirut www.peri.kz P.O. Box 90 416 Jdeidet
[email protected] 44 Russian Federation www.peri.de OOO PERI 142403 Noginsk 38 Lithuania
[email protected] PERI UAB www.peri.ru 02300 Vilnius
[email protected] 45 South Africa www.peri.lt PERI Wiehahn (Pty.) Ltd. Bellville 7535 39 Marocco
[email protected] PERI S.A. www.periwiehahn.co.za Tanger
[email protected] 46 Ukraine www.peri.de TOW PERI Ukraina 07400 Brovary 40 Israel
[email protected] PERI Formwork www.peri.ua Engineering Ltd 49002 Israel 47 Egypt
[email protected] PERI GmbH www.peri.co.il 11361 Heliopolis Cairo 41 Bulgaria
[email protected] PERI BULGARIA EOOD www.peri.com.eg 1839 – Sofia
[email protected] 48 Serbia www.peri.bg PERI Oplate d.o.o. 11070 Novi Beograd offi
[email protected] www.peri.co.yu
49 Mexico PERI Cimbras y Andamios, S.A. de C.V. Estado de México, C.P. 54680
[email protected] www.peri.com.mx 50 Azerbaijan PERI Kalıp ve İskeleleri Baku
[email protected] www.peri.com.tr 51 Turkmenistan PERI Kalıp ve İskeleleri 744035 Aşgabat
[email protected] www.peri.com.tr 52 Belorussia PERI Belarus 220030 Minsk
[email protected] www.peri.com.tr 53 Croatia PERI oplate i skele d.o.o. 10 250 Donji Stupnik/ Zagreb
[email protected] www.peri.com.hr 54 Iran PERI GmbH Building No. 4 P.O. Box 1939793669 Teheran-Iran
[email protected] www.peri.ir
55 India PERI (India) Pvt Ltd Mumbai – 400064
[email protected] www.peri.in
62 Peru PERI Peruana SAC Lima/Peru
[email protected] www.peri.com.pe
56 Jordan PERI Jordan 11947 Amman
[email protected] www.peri.de
63 Panama PERI Panama Inc. 587 Panama City
[email protected] www.peri.com.pa
57 Kuwait PERI Kuwait 13011 Kuwait
[email protected] www.peri.de 58 Saudi Arabia PERI Saudi Arabia Jeddah - 21463 K.S.A
[email protected] www.peri.de 59 Qatar PERI Qatar LLC Doha
[email protected] www.peri.de 60 Algeria Société PERI S.A.S. Kouba - Alger
[email protected] www.peri.fr 61 Albania Autostrada TIRANE-DURRES Tirane / ALBANIA
[email protected] www.peri.com.tr
647
Wall Formwork Panel Formwork Girder Formwork Circular Formwork Facade Formwork Brace Frame
Climbing Systems Climbing Scaffold Self-Climbing System Climbing Protection Panel Platform Systems
Column Formwork Square Rectangular Circular
Scaffold, Stairways, Working Platforms Facade Scaffold Working Platform Weather Protection Roof Stairway Access
Slab Formwork Panel Formwork Beam Grid Formwork Girder Formwork Slab Table Beam Formwork
Bridge and Tunnel Formwork Cantilevered Parapet Carriage Cantilevered Parapet Platform Engineer’s Construction Kit
Shoring Systems Steel Slab Props Aluminium Slab Props Tower Systems Heavy-Duty Props
Services Formwork Assembly Cleaning / Repairs Formwork Planning Software Statics Special Constructions
Additional Systems Plywood Formwork Girders Stopend Systems Pallets Transportation Containers
PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)73 09.9 50- 0 Fax +49 (0)73 09.9 51- 0
[email protected] www.peri.com
D e 11/2009 10ma Art.-Nr.: 792576 © Copyright by PERI GmbH
PERI Product Range