Spline Data Per ANSI B92.1 Flat Root, Side Fit Pitch .......................... .......................... 16/32 Pressure........................30° Pressure....................... .30°
06
Spline Data Per ANSI B92.1 Flat Root, Side Fit Pitch ..........................32/64 ..........................32/64 Pressure........................30°
112 Clockwise Rotation STEP 8 - Select a shaft STEP 2 - Select a displacement 010
10 cm3/r [0.6 in3/r]
013 13 cm3/r [0.8 in3/r]
STEP 3 - Select operation orientation L
Left Hand
R
Right Hand
Left and Right Hand Pumps are determined by the location of the DDC when looking at the side of the pump with Main Ports a and b while the input shaft is facing down.
STEP 4 - Select housing mount A
2-Hole SAE A Mount
01
15mm Straight
05
Tang Shaft
02
17mm Straight
06
5/8” Straight
03
9T Spline
07
15mm Tapered
04
19T Spline
STEP 9 - Shock valve setting - bar [psi] A
117 [1700] - 159 [2300]; No Orifice
B
117 [1700] - 159 [2300]; 0.7mm Orifice
C
117 [1700] - 159 [2300]; 0.8mm Orifice
STEP 10 - Select miscellaneous options
STEP 5 - Select case drain A
9/16-18 UNF-2B SAE O-Ring
STEP 6 - Select case drain location 1
Same Side as Main Ports
2
Opposite Side of Main Ports
3
Opposite Side of Control Handle
AA
No Additional Options
AB
Lever Connected to the Control Handle (ARM)
AC
Return to Neutral (RTN)
AD
Lever Connected to the Control Handle with Return to Neutral