[051] DIPLOMA IN INDUSTRIAL SAFETY GUIDELINES FOR PROJECT WORK
A Student has to take-up a project work work in the month of March and complete complete it in two months in partial requirement of the award of Diploma in Industrial Safety. The Project Report must be based on detailed and intensive study in the industry and the scope of the project is as follows: SCOPE OF THE PROJECT WORK
To gain an insight into industrial safety to know how the problems of Industrial Safety are identified and solved.
To help the Safety officers, Safety engineers and Safety specialists to find solutions to their problems.
To examine and evaluate the “Safety performance of the industry”.
To study the causes of accidents with particular reference to the prevailing unsafe unsafe conditions and and practices.
To give exposure to the students and to develop the ability in the fields of hazards, training, management and methodology of planning a study, data collection, analysis, presentation and decision making on the problems related related to safety industry.
PASSING REGULATIONS
The Project work will be valued for maximum marks of 100, of which 75 will be for the project work and 25 for the viva-voce. A minimum of 50 marks is required to pass the Project paper, of which he /she should secure a minimum of 30 marks in the project report alone. In case, a candidate fails he/she has to resubmit the project report. The Viva-voce examination is compulsory for passing the Project paper.
GENERAL INSTRUCTIONS
1. The enclosed Proforma (original & duplicate) are to be submitted on or th before 20 March 2015.
2. Students are instructed to refer to the annexure for selection of project title. 3. The proforma (original) will be returned to the student after approval. 4. After the approval of the topic one typed copy of the project report (A4-size) in neatly bound form should be submitted on or before st
31 May 2015. Project report submitted after the last date will not be
considered for valuation. 5. A Photostat copy of the approved project proforma with abstract should be attached on the first page of the project report without fail. 6. Project report and all correspondence in this regard should be sent only to The Director, Directorate of Distance Education Annamalai University Annamalai Nagar - 608002
and Super scribed on the top of the envelope as DI S Proj ect Report . 7. The student should bring a copy of the project report at the time of vivavoce examination. PROJECT ABSTRACT Th e pr oject abstr act shou ld be prepared and to be sent alon g with Prof orm a to The Director, Directorate of Distance Education, Annamalai University,
Annamalainagar-608002 Th e f ormat of the Abstr act shall be as fol lows :
1. Title of the Project 2. Statement of the Problem 3. Objectives of the Study 4. Research methodology
PROJECT PROFORMA SUBMISSION AND APPROVAL
After finalizing the topic, students should send the project proforma along with the Abstract. Incompletion of the Project proforma in any aspect will be rejected. FORMAT OF THE PROJECT REPORT
1. The project report should not exceed 150 typed pages. 2. It should be typed in Times New Roman, 12 font size with 1.5 line spacing. 3. Project report should contain a copy of the approved Abstract. IMPORTANT DATES:
The Last Date for submission of the Project Proforma : 20.03.2015 The Last Date for submission of the Project Report
: 31.05.2015
DR.RM.CHANDRASEKARAN DIRECTOR
ANNAMALAI
UNIVERSITY
DI RECTORATE OF D I STANCE EDUCATI ON
[051] DIPLOMA IN INDUSTRIAL SAFETY PROFORMA FOR APPROVAL OF PROJECT WORK Enrolment Number:
1. Name and Address of the Student
:
2. Whether employed
: Yes/No
a) If Yes Name & Address of the Industry where employed
3. Title of the Project (in Block Letters)
:
:
4. Abstract
: (to be enclosed separately along with proforma)
Signature of the Student _____________________________________________________________ [for Office use only]
Approved / To be resubmitted / Rejected
Signature of the Coordinator
Engineering Wing-Head
DUPLICATE
ANNAMALAI
UNIVERSITY
DI RECTORATE OF D I STANCE EDUCATI ON
[051] DIPLOMA IN INDUSTRIAL SAFETY PROFORMA FOR APPROVAL OF PROJECT WORK Enrolment Number:
1. Name and Address of the Student
:
2. Whether employed
: Yes/No
a) If Yes Name & Address of the Industry where employed
:
3. Title of the Project (in Block Letters)
:
4. Abstract
: (to be enclosed separately along with proforma)
Signature of the Student _____________________________________________________________ [for Office use only] Approved / To be resubmitted / Rejected
Signature of the Coordinator
Engineering Wing-Head
ANNEXURE The students may select any one of the titles from the following list and fill up the proforma and send the same to
“Th e
Di r ector , Di r ectorate of D istance
”. Education, An namalai Uni ver sity, Ann amalai Nagar – 608002
1. A study on Machine Guarding and its Types. 2. A study on House keeping in Industries. 3. A study on Psychological and Ergonomic Hazards in Industries. 4. A study on Work Permit systems. 5. A study on Personal Protective Equipments. 6. Safety in High Pressure Systems. 7. Need of Safety Organization, Education, Motivation and Training in Industries. 8. A study on Accident Investigation and Report. 9. Safety in Confined Space. 10. Safety in Excavation Operation. 11. Safety in Handling and Storage of Compressed gas Cylinders. 12. Safety in Aviation Industries. 13. Safety in Hazardous Industrial Waste Treatment and Disposal. 14. Safety in Bulk Drug Storage. 15. Safety in Handling and Storage of Chlorine and its system 16. A study on Radiation Hazards and its Effects. 17. Safety Management 18. Fire safety in Petrochemical industries 19. Role of Factory Management in Safety 20. Safety in Electrical systems - Operation, Maintenance and Installations 21. Risks in Maintenance activities 22. Safety in construction works 23. Hazards in work environment & safety measures 24. Safety in Thermal power plants 25. High risk activities & accident control measures 26. Safety & personal protective equipment 27. Fire safety 28. Industrial accidents - Causes & Contro l 29. Safety in Material handling
30. Safety procedures and rules in industries 31. Control of Work place Hazards 32. Safety in Chemical process 33. A study on Disaster management plan 34. Fault-Tree analysis 35. Hazard analysis (HAZAN) 36. Workshop hazards 37. Safe handling of industrial solvents 38. HAZOP study 39. Job safety analysis 40. Safety in handling, storage and transportation of corrosive chemicals 41. On-site and Off-site emergency plans 42. Electrical safety in industries 43. A study on fire prevention system in industries 44. Safety in heavy machinery and equipments 45. A study on OSHA and its needs 46. Safety in mining industries 47. Safety and Health audit in industries 48. Detailed study on workmans compensation act ’
49. Safety in Bio-process Industries 50. Safety Health and Environment Note: Students may also be permitted to select topics (related to Industrial Safety) other than the above mentioned on request. *****
