KPI in LTE Radio Network
http://www.linkedin.com/pub/ray-khastur/36/965/b7a
KPI System Overview LTE KPIs
Accessability • RRC SETUP SR • ERAB Setup SR (VoIP/ALL) • Call Setup SR (VoIP/ALL)
Retainability
Mobility
• Call Drop Rate (VoIP/ALL)
• HHO SR ( Intra/Inter Frequency)
• Call Setup Complete Rate (VoIP/ALL)
• HO in SR
Availability • Radio Network Unavailabil ity Rate
Utilization • UL/DL RB Utility Rate
• Inter-RAT HHO SR
Traffic • Cell UL/DL Traffic Volume • Radio Bearer Number
Latency • Access Latency • Service Latency
Integrity • Service UL/DL Throughput
• Interrupt Latency
Radio Network KPI :
Service KPI :
Focus on the radio network performance
Focus on the user experience 4G LTE - RF Optimization Objects and Target Baseline | Page 2
Accessibility (1) – RRC Setup Success Rate RRC Setup Success Rate (service) The RRC setup procedure is trigged by different reasons as identified by the establishmentCause field in the RRCConnctionRequest message: emergency, highPriorityAccess, mt-Access, mo-Signalling, mo-Data, delayTolerantAccess-v1020. The UE sets the establishmentCause and received by eNodeB. Causes except mo-Signalling are categorized as service related ones, and the cause of mo-Signalling is categorized as signal related ones. This KPI evaluates the RRC setup success rate with service related causes in a cell or cluster. RRC _ SSRService
RRC _ Connection Success service 100% RRC _ Connection Attempt service
RRC Setup Success Rate (Signal) This KPI evaluates the RRC setup success rate with signal related causes (mo-Signalling) in a cell or cluster. RRC _ SSRSignal
RRC _ Connection Success Signal RRC _ Connection Attempt Signal
100%
4G LTE - RF Optimization Objects and Target Baseline | Page 3
Accessibility (2) – Counter Mapping for RRC SSR
L.RRC.ConnReq.Att…
L.RRC.ConnReq.Succ …
4G LTE - RF Optimization Objects and Target Baseline | Page 4
Accessibility (3) – QCI Definition LTE-SAE QoS Class Identifier There are 9 QCIs defined in 3GPP TS 23.203. Each of QCI has its QoS requirements, and each E-RAB will has the attribute of QCI.
4G LTE - RF Optimization Objects and Target Baseline | Page 5
Accessibility (4) – ERAB Setup Success Rate VoIP ERAB Setup Success Rate This KPI can be used to evaluate the ERAB setup success rate of VoIP service (QCI 1 service) in a cell or cluster. VoIP _ ERAB _ SSR
VoIP _ ERAB _ SetupSuccess 100% VoIP _ ERAB _ SetupAttempt
ERAB Setup Success Rate (All) This KPI can be used to evaluate the ERAB setup success rate of all services including the VoIP service in a cell or a cluster. ERAB _ SSR( ALL)
ERAB _ SetupSuccess 100% ERAB _ SetupAttempt
4G LTE - RF Optimization Objects and Target Baseline | Page 6
Accessibility (5) – Counter Mapping for ERAB SSR
ERAB Setup Attempt Counters
ERAB Setup Success Counters
ERAB Setup Attempt Counters
ERAB Setup Success Counters
4G LTE - RF Optimization Objects and Target Baseline | Page 7
Accessibility (6) – Call Setup Success Rate VoIP Call Setup Success Rate (VoIP CSSR) This KPI evaluates the success rate of the whole setup procedure for VoIP service (QCI 1 service) in a cell or cluster, which mainly includes three phases : RRC setup phase, S1 Signaling connection establishment phase and VoIP E-RAB setup phase: VoIP _ CSSR
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess VoIP _ ERAB _ SetupSuccess * * 100% RRC _ ConnectionAttempt Service S1SIGConnectionEstablishAttempt VoIP _ ERAB _ SetupAttempt
CSSR( ALL)
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess ERAB _ SetupSuccess * * 100% RRC _ ConnectionAttemptService S1SIGConnectionEstablishAttempt ERAB _ SetupAttempt
Call Setup Success Rate (ALL)
This KPI can be used to evaluate the call setup success rate of all services including the VoIP service in a cell or a cluster. This KPI mainly includes three phases : RRC setup phase, S1 Signaling connection establishment phase and service E-RAB setup phase:
4G LTE - RF Optimization Objects and Target Baseline | Page 8
Accessibility (7) – Counter Mapping for CSSR
4G LTE - RF Optimization Objects and Target Baseline | Page 9
Retainability (1) – Call Drop Rate VoIP Call Drop Rate This KPI can be used to evaluate the call drop rate of VoIP service (QCI 1 service) in a cell or cluster, the call drops happen when eNode initiate active ERAB (with data in buffer) release process by E-RAB Release Indication or UE Context Release Request message with Cause field with abnormal reasons (the cause other than : Normal Release, Detach,User Inactivity, cs fallback triggered, UE Not Available For PS Service,or Inter-RAT redirection), and all of the other E-RAB releases are consider as normal E-RAB release. VoIP _ CDR VoIP _ ERAB _ Abnormal Re lease 100% VoIP _ ERAB _ Re lease
Call Drop Rate(ALL) This KPI can be used to evaluate the call drop rate of all services in a cell or a cluster, including VoIP service. CDR( ALL)
ERAB _ Abnormal Re lease 100% ERAB _ Re lease
Call Drop Rate(Always Online)
This KPI can be used to evaluate the call drop rate of all the services, including the VoIP services, when the always online state is active. In always online state, the E-RAB number of UE entering the un-synchronous state from synchronous state will be considered for the KPI calculating. AlwaysOnline _ CDR
ERABAbnormalReleaseOfAlwaysOnline 100% ERAB Re leaseOfAlwaysOnline
4G LTE - RF Optimization Objects and Target Baseline | Page 10
Retainability (2) – Counter Mapping for Call Drop Rate
Normal and Abnormal release Counters based on the cause
Normal and Abnormal release Counters based on the cause
4G LTE - RF Optimization Objects and Target Baseline | Page 11
Retainability (3) - Call Setup Complete Rate VoIP Call Setup Complete Rate (VoIP CSTR) This KPI evaluates the call Setup Complete Rate for VoIP service (QCI 1 service) in a cell or cluster, which means the rate of the VoIP service can be normally terminated once user do the attempt to setup the service. And it can include 4 phases: RRC setup phase, S1 Signaling connection establishment phase, VoIP E-RAB setup phase and VoIP service E-RAB release phase; VoIP _ CSTR
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess VoIP _ ERAB _ SetupSuccess VoIP _ ERAB _ Normal Re lease * * * 100% RRC _ ConnectionAttemptService S1SIGConnectionEstablishAttempt VoIP _ ERAB _ SetupAttempt VoIP _ ERAB _ Re lease
Call Setup Complete Rate (ALL) The similar as upper KPI, this KPI will evaluate the success rate in totally for 4 phases: RRC setup phase, S1 Signaling connection establishment phase, service E-RAB setup phase and service E-RAB release phase; CSTR( ALL)
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess ERAB _ SetupSuccess ERAB _ Normal Re lease * * * 100% RRC _ ConnectionAttemptService S1SIGConnectionEstablishAttempt ERAB _ SetupAttempt ERAB _ Re lease
Call Setup Complete Rate (Always Online) The similar as upper KPI, this KPI will evaluate the success rate in totally for 4 phases: RRC setup phase, S1 Signaling connection establishment phase, service E-RAB setup phase and service E-RAB release phase (when the always online state is active); CSTR( AlwaysOnline)
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess ERAB _ SetupSuccess ERABAbnormalReleaseOfAlwaysOnline * * * 100% RRC _ ConnectionAttemptService S1SIGConnectionEstablishAttempt ERAB _ SetupAttempt ERAB Re leaseOfAlwaysOnline
4G LTE - RF Optimization Objects and Target Baseline | Page 12
Retainability (4) - Counter Mapping for CSCR
4G LTE - RF Optimization Objects and Target Baseline | Page 13
Mobility (1) – Intra-LTE Handover (Out) Success Rate Intra-frequency Handover Out Success Rate This KPI can be used to evaluate the intra-frequency handover out success rate in a cell or cluster. IntraF _ HOOut _ SR
IntraF _ HOOutSuccess 100% IntraF _ HOOutAttem pt
Inter-frequency Handover Out Success Rate This KPI can be used to evaluate the inter-frequency handover out success rate in a cell or cluster. InterF _ HOOut _ SR
InterF _ HOOutSuccess 100% InterF _ HOOutAttem pt
4G LTE - RF Optimization Objects and Target Baseline | Page 14
Mobility (2) – Counter Mapping for Intra-LTE HO SR
Handover Attempt Counters
Handover Success Counters
4G LTE - RF Optimization Objects and Target Baseline | Page 15
Mobility (3) - Intra-LTE Handover In Success Rate Handover In Success Rate This KPI can be used to evaluate the handover in success rate in a cell or cluster. HOIn _ SR
HOInSuccess 100% HOInAttempt
4G LTE - RF Optimization Objects and Target Baseline | Page 16
Mobility (4) - Counter Mapping for Intra-LTE HO In SR
HO in Attempt Counters
HO in Success Counters
4G LTE - RF Optimization Objects and Target Baseline | Page 17
Mobility (5) – Inter-RAT Handover Success Rate Inter-RAT Handover Success Rate (LTE to WCDMA) This KPI can be used to evaluate the inter-RAT handover success rate from LTE to WCDMA in a cluster. IRATHO _ L2W _ SRout
IRATHO _ L 2W _ SuccessOut 100% IRATHO _ L2W _ AttemptOut
IRATHO _ L2G _ SRout
IRATHO _ L2G _ SuccessOut 100% IRATHO _ L2G _ AttemptOut
Inter-RAT Handover Success Rate (LTE to GERAN) This KPI can be used to evaluate the inter-RAT handover success rate from LTE to GERAN in a cluster.
4G LTE - RF Optimization Objects and Target Baseline | Page 18
Mobility (6) – Inter-RAT Handover Success Rate Inter-RAT Handover Success Rate (LTE to CDMA2000) This KPI can be used to evaluate the inter-RAT handover success rate from LTE to CDMA2000 in a cluster. IRATHO _ L2C _ SRout
IRATHO _ L2C _ SuccessOut 100% IRATHO _ L2C _ AttemptOut
4G LTE - RF Optimization Objects and Target Baseline | Page 19
Mobility (7) – Counter Mapping for Inter-RAT HO SR
B point , HO attempt, and distinguish the target system by an element “targetRAT-Type ” in the message
C point, HO Success 4G LTE - RF Optimization Objects and Target Baseline | Page 20
