Model No.PIC115: The aim of this project is to remind people who forget to take their medicines on time. Watch the output video and get more knowledg...
It's a Microcontroller Based DIY Electronics Project. Named Wireless RF Module Using PIC Microcontroller. The RF module is a small electronic circuit used to transmit, receive, or transceive…Descripción completa
ZxcvbnbvcxDescripción completa
street lights are switched on for the whole night and during the day they are switched off. But during the night time there is no need of street lights if there is no traffic. Saving of this…Full description
street lights are switched on for the whole night and during the day they are switched off. But during the night time there is no need of street lights if there is no traffic. Saving of this…Full description
ZxcvbnbvcxFull description
Most of times patients may forget to take the medicines at proper time as per their prescription which may cause in late recovery from the disease illness. In case of some specific diseases like diabetes, hypertension, anemia, medication mix ups or i
dfbdfbxhgDescription complète
dfbdfbxhg
This paper is of great importance for monitoring and controlling the distance between the car and obstacles on the road. The objective of this paper was to monitor and control automatically the vehicle and to reduce many accidents. It is sure that th
hiFull description
The aim of the project was to design a microcontroller based automated Body Mass Index (BMI)calculator with LCD display, which calculates the body mass index using the two basic parameters that are...
good luckDescrição completa
good luckFull description
PIC microcontrollers are a family of specialized microcontroller chips produced by Microchip Technology in Chandler, Arizona. The acronym PIC stands for "peripheral interface controller," al…Descripción completa
The purpose of this project was to design a portable and low cost power system that combines both wind electric and solar electric technologies. This system will be designed in efforts to develop a...
This paper investigates based on microcontroller medicine reminder alarm system. This system includes the DS1307 Real Time Clock RTC module, L298N motor driver, DC motor, I2C Liquid Crystal Display LCD module, four pushbuttons and buzzer. Arduino UNO
Microcontroller
MEDICATIONSFull description
PORTABLE PROGRAMMABLE MEDICATION REMINDER USING PIC MICROCONTROLLER
ABSTRACT
The aim of this project is to remind people who forget to take their medicines on time. Elderly people because of their age usually forget to take their medicines. This project will help to remind the patient to take his/her medicine at prescribed time. The proposed system is best suited for elderly people and people who are very busy, as this device will not only remind them of their medicines with a buzzer sound but also displays the name of the medicine to be taken at that time. The patient can store the respective time of the particular medicine through a matrix keypad. Based on an RTC (Real Time Clock) interfaced to the microcontroller, the programmed time for the medicine is displayed on the LCD along with a buzzer sound to alert the patient about taking the appropriate medicine. The microcontroller used in this project is of PIC16F8 family. RTC used maintains an accurate time as it is supported by a crystal. This project in future can be enhanced by integrating it with GSM technology, so that the patient receives a reminder about the medicine he has to take via SMS on his/her cell phone. Also a provision to change the name of the medicine can be incorporated by interfacing the device with a PC or EEPROM (non-volatile memory).
