“It is a practice of increasing efficiency with which buildings use resources-energy, water and materials while reducing building impact on human health and the environment.” INTRODUCTION TO SUSTAIBLE MATERIALS Green building materials are composed of renewable, rather than nonrenewable resources. Green materials are environmentally responsible because impacts are considered over the life of the product. Depending upon project-specific goals, an assessment of green materials may involve an evaluation of one or more of the criteria listed below. Sustainable materials are materials used throughout our consumer and industrial economy that can be produced in required volumes without depleting non-renewable resources and without disrupting the established steadystate equilibrium of the environment and key natural resource systems. Such materials vary enormously and may range from bio-based polymers derived from polysaccharides, or highly recyclable materials such as glass that can be reprocessed an indefinite number of times without requiring additional mineral resources.
THE PURPOSE OF THIS STUDY Materials are the stuff of economic life in our industrial world. They include the resource inputs and the product outputs of industrial production. How we handle them is a major determinant of true economic efficiency, real prosperity, social justice, our Personal health, and the health of the natural environment. Materials are, moreover, far more than resources or products. They are gifts of nature, and substances of Gaia’s Body. How we relate to materials in their production and their consumption is one of the best barometers of our fundamental relationship to that which gives us life. Not Coincidentally, it reflects our relationship to ourselves, our creativity, our work and possibilities for self-actualization and community development.
This dissertation is about building materials: about how we use them now, how they might be used more appropriately, and the process of getting from here to there. Our current use of materials is running down natural systems, destroying community, debasing work, and suppressing all kinds of possibilities for real development. To remedy this, we need to conserve materials, reduce their unnecessary use, produce them more benignly, make them last longer, and recycle and reuse them. We also need to Develop community consumer initiatives and regulatory processes to support these Reforms.
AIM Aim of this dissertation is to study materials for sustainable construction and make an eco-friendly environment.
OBJECTIVES 1. To study about the different type of sustainable building materials. 2. To study about how to make a building sustainable. 3. To study the Material selection criteria. 4. To study how to make a building environment friendly.
DEFINITION OF SUSTAINABILITY BRIEFLY More and more of us are convinced that we would have to do something else on the field of architecture to provide our environment. But what and how should we build? According to our current attitude, the task of an architect is to display demands of society in space but they should not specify such demands. As architects, due to our multifarious skills, we can have an overview on the creation and maintenance of a built environment as a whole. In the designing part of architectural process, when we should get to know different fields of life. We need to look into everything related to our project, to create a suitable, functionally relevant space. Nice to notice the relationship between a well- designed building and its surroundings, whether old or new building is to be considered. "A building is not just a place to be. It is a way to be," and another quote “Each building must respond to Nature, and every building must have its own Nature.” (Frank Lloyd Wright )
Sustainable architecture means a new attitude, it uses research results about the environment, the biology and human ecology and it tries to use these results in the construction technology. Sustainability is based on a simple principle: Everything that we need for our survival and feeling of comfort, either directly or indirectly, is in our natural environment, humans and nature can exist in productive harmony, that permits fulfilling the social, economic and other requirements of present and future generations. Along these points, sustainability and the sustainable development itself have three important pillars( economy, environment, society) which together form a unit and create the essential of sustainability. Few words in the building design and in the construction process have been so poorly used as that of sustainable design and green architecture, that it has created barriers to make sense this expression. In the dictionary the word sustainable is defined that something maintained, but it doesn't indicate its relation to the natural world. According to major part of the literature, the house-man-environment connection points are the following: architectural formation, location, materials, construction techniques, energy and material flows.
"The building structures of sustainable architecture are made according to theoretical exigences of sustainability and support the construction-ecological and construction biological-operation during its whole life cycle. "
This is a definition of the sustainable materials and structures according to Lányi Erzsébet. Along with this philosophy outlined, that building structures can be fitted to the built framework of sustainable philosophy if:
they are made of in-situ, local materials
renewable, recyclable, non-toxic materials
they require "closed" production technologies built upon circular processes, and gentle implementation and maintenance techniques also involving human resources
they can economize with energy use and air moisture content
they are able to increase and utilize environmental resources
ENVIRONMENTALLY-FRIENDLY BUILDING DESIGN- USING SUSTAINABLE MATERIALS The building design is a process of assembling different materials, whenever you buy them as a product, grow them, find them on site or dig them. We have many technologies and possibilities for the best decision of the existing situation, but first of all, besides the prices and the other management things, we should consider how our way of choosing impacts our environment. A modern green building has to be a low construction impact while being energy efficient, long lasing, non toxic and aesthetics. Sometimes the mass-produced materials seem to be the right choice to serve these goals, but also we have to take into consideration, how and where they are produced, and how it is after the building's life cycle. For the environmentally-friendly buildings it is also a demand, that they should not pollute their surroundings after using. In the vernacular architecture for instance, it was a common practice, that after the death or moving out of the inhabitants, the walls (from clay, or other natural materials) just left alone, and it got back slowly to the nature. That means, its materials can be integrated to the environment. Further the designing part, we should support the environmentally-friendly attitude by our choosing as well. During the construction of buildings, the architects should think holistically about the materials and the whole structure too. Sustainable design is an approach to design , a holistic approach looking all elements as a part of a bigger whole. A building is as strong as its weakest component, then for instance strong walls and weak foundation add up weak walls. A most important thing about a structure, trumping material choices and aesthetics, is that they must work together as a unit. Besides considering the properties the cost of the materials are also important for the constructor and for the consumer as well by choosing. We can find a paradox, that the
originally cheap materials could be more expensive on the market. Although the regional products are the most economic and cheap ones, they are appeared much more expensive, than the usual ones, however they have significantly higher energy content, they are often not so healthy or not re-used. Sustainable building Materials Energy MJ/kg Density kg /m3 Concrete (in-situ- structure) 11.1 2400 Brick (common) 3.0 1700 Clay bricks 2.5 Insulation (Rockwool) 16.80 24 Expanded Polystyrene Insulation 88.6 15-30 Polyurethane insulation 101.5 30 Wool insulation 20.9 25 Clay tile 6.5 1280 Straw bale 0.91 100-110 Rammed earth 0.7 1540 Rammed earth (no added cement) 0.45 1460 Chart 1_Embodied energy can be cheaper and sometimes slightly more expensive, it has no or just a low hidden costs (the sustainable buildings would not have any hidden-costs according to its definition). For the first time we would chosen just the well-known and so-called modern products, however, the sell prize does not contain the other costs (energy, transportation, environmental deterioration and other effects). This is non-renewable energy which is used for new materials production, extraction, transportation and manufacturing, is called embodied energy. Depending on the material, it may be very different. It has become a popular practice to regard the embodied energy as summary of the cradle-to-gate, which includes all energy (in primary form) until the product leaves the factory gate, and the cradle-to-site, which includes all of the energy consumed until the product has reached the building site. Another point which we should bear in mind by choosing, the studies of the historical techniques. Humans have been building strong structures since ancient times. Rewinding back in time, everyone knew how to build a house, as houses were built from local materials, adopting parents and grandparent experiences. Many solutions have been already worked out also for myriad climatic situations and material combinations. Unfortunately those experiences are wrapped into the most of the past, because it does not help in developing of modern materials and the developing industry is pushing out the natural materials from the construction markets with their easy and fast mounting. But it seems the occurring of damaging processes in the environment (climate change, green house effect, oil crisis, smog in the developed cities and so on) In the last century people have used more non-renewable energy resources than over all the thousands of years since its earliest beginnings. These reasons made people think, take certain measures and they tend to be more and more enthusiastic about doing something to protect our Earth. WHAT IS A GREEN BUILDING? Green building, or sustainable design, is the practice of increasing the efficiency with which buildings and their sites use energy, water, and materials, and reducing building impacts on human health and the environment over the entire life cycle of the building. Green building concepts extend beyond the walls of buildings and can include site planning, community and land use planning issues as well. Green building materials offer specific benefits to the building owner and building occupants:
Reduced maintenance/replacement costs over the life of the building.
Energy conservation.
Improved occupant health and productivity.
Lower costs associated with changing space configurations.
Greater design flexibility.
Building and construction activities worldwide consume 3 billion tons of raw materials each year or 40 percent of total global use. Using green building materials and products promotes conservation of dwindling nonrenewable resources internationally. In addition, integrating green building materials into building projects can help reduce the environmental impacts associated with the extraction, transport, processing, fabrication, installation, reuse, recycling, and disposal of these building industry source materials. WHY GREEN BUILDING IS IMPORTANT The growth and development of our communities has a large impact on our natural environment. The manufacturing, design, construction, and operation of the buildings in which we live and work are responsible for the consumption of many of our natural resources. The importance of this is it lessen the consume of energy and the pollution as well because the more we use nonrenewable energy the higher the risk of pollution. Environmental Benefits
Enhance and protect biodiversity and ecosystems
Improve air and water quality
Reduce waste streams
Conserve and restore natural resources Economic Benefits
Reduce operating costs
Improve occupant productivity
Enhance asset value and profits
Optimize life-cycle economic performance
Social Benefits
Enhance occupant health and comfort
Improve indoor air quality
Minimize strain on local utility infrastructure
Improve overall quality of life
Goals of Green Building Energy efficiency Green buildings often include measures to reduce energy consumption – both the embodied energy required to extract, process, transport and install building materials and operating energy to provide services such as heating and power for equipment. As high-performance buildings use less operating energy, embodied energy has assumed much greater importance – and may make up as much as 30% of the overall life cycle energy consumption. Studies such as the U.S. LCI Database Project show buildings built primarily with wood will have a lower embodied energy than those built primarily with brick, concrete, or steel. To reduce operating energy use, designers use details that reduce air leakage through the building envelope (the barrier between conditioned and unconditioned space). They also specify high-performance windows and extra insulation in walls, ceilings, and floors. Another strategy, passive solar building design, is often implemented in low-energy homes. Designers orient windows and walls and place awnings, porches, and trees to shade windows and roofs during the summer while maximizing solar gain in the winter. In addition, effective window placement (day lighting) can provide more natural light and lessen the need for electric lighting during the day. Solar water heating further reduces energy costs. Onsite generation of renewable energy through solar power, wind power, hydro power, or biomass can significantly reduce the environmental impact of the building. Power generation is generally the most expensive feature to add to a building.
Water efficiency Reducing water consumption and protecting water quality are key objectives in sustainable building. One critical issue of water consumption is that in many areas, the demands on the supplying aquifer exceed its ability to replenish itself. To the maximum extent feasible, facilities should increase their dependence on water that is collected, used, purified, and reused on-site. The protection and conservation of water throughout the life of a building may be accomplished by designing for dual plumbing that recycles water in toilet flushing or by using water for washing of the cars. Waste-water may be minimized by utilizing water conserving fixtures such
as ultra-low flush toilets and low-flow shower heads. Bidets help eliminate the use of toilet paper, reducing sewer traffic and increasing possibilities of re-using water on-site. Point of use water treatment and heating improves both water quality and energy efficiency while reducing the amount of water in circulation. The use of non-sewage and greywater for on-site use such as site-irrigation will minimize demands on the local aquifer.
Materials efficiency Building materials typically considered to be 'green' include lumber from forests that have been certified to a third-party forest standard, rapidly renewable plant materials like bamboo and straw, dimension stone, recycled stone, recycled metal (see: copper sustainability and recyclability), and other products that are non-toxic, reusable, renewable, and/or recyclable. For concrete a high performance or Roman self-healing concrete is available. The EPA (Environmental Protection Agency) also suggests using recycled industrial goods, such as coal combustion products, foundry sand, and demolition debris in construction projects. Energy efficient building materials and appliances are promoted in the United States through energy rebate programs.
Operations and maintenance optimization No matter how sustainable a building may have been in its design and construction, it can only remain so if it is operated responsibly and maintained properly. Ensuring operations and maintenance(O&M) personnel are part of the project's planning and development process will help retain the green criteria designed at the onset of the project.Every aspect of green building is integrated into the O&M phase of a building's life. The addition of new green technologies also falls on the O&M staff. Although the goal of waste reduction may be applied during the design, construction and demolition phases of a building's life-cycle, it is in the O&M phase that green practices such as recycling and air quality enhancement take place.
Waste reduction Green architecture also seeks to reduce waste of energy, water and materials used during construction. For example, in California nearly 60% of the state's waste comes from commercial buildings[40] During the construction phase, one goal should be to reduce the amount of material going to landfills. Well-designed buildings also help reduce the amount of waste generated by the occupants as well, by providing on-site solutions such as compost bins to reduce matter going to landfills. To reduce the amount of wood that goes to landfill, Neutral Alliance (a coalition of government, NGOs and the forest industry) created the website dontwastewood.com. The site includes a variety of resources for regulators, municipalities, developers, contractors, owner/operators and individuals/homeowners looking for information on wood recycling.
When buildings reach the end of their useful life, they are typically demolished and hauled to landfills. Deconstruction is a method of harvesting what is commonly considered "waste" and reclaiming it into useful building material. Extending the useful life of a structure also reduces waste – building materials such as wood that are light and easy to work with make renovations easier. To reduce the impact on wells or water treatment plants, several options exist. "Greywater", wastewater from sources such as dishwashing or washing machines, can be used for subsurface irrigation, or if treated, for nonpotable purposes, e.g., to flush toilets and wash cars. Rainwater collectors are used for similar purposes. Centralized wastewater treatment systems can be costly and use a lot of energy. An alternative to this process is converting waste and wastewater into fertilizer, which avoids these costs and shows other benefits. By collecting human waste at the source and running it to a semi-centralized biogas plant with other biological waste, liquid fertilizer can be produced. This concept was demonstrated by a settlement in Lubeck Germany in the late 1990s. Practices like these provide soil with organic nutrients and create carbon sinksthat remove carbon dioxide from the atmosphere, offsetting greenhouse gas emission. Producing artificial fertilizer is also more costly in energy than this process. CONCEPT The “Green Building “building concept is gaining importance in various countries, including India. These are the buildings that ensure that waste is minimized at every stage during the construction and operation of the building, resulting in low costs, according to the experts in the technology. The technique associate with the “Green Building” include measures to prevent erosion of soil, rainwater harvesting, use of solar energy, preparation of usages of water, recycling of waste water and use of world class energy efficient practices. A similar concept is natural building, which is usually on smaller scale and tends to focus on the use of natural materials that are available locally.
MATERIAL/PRODUCT SELECTION PROCESS
Before understanding the process of material/product selection, it is important to know the entire process of a construction project. As indicated in figure, any project of this kind mainly contains seven phases. In the first programming phase, the project has just started to be planned and the owner has only a general concept about the project. Also all potential participants have to decide whether to join in this project and get ready for bidding. In the second phase, schematic design, the project is handed to the architects and, with the assistance of the owner the architects finish the schematic design of the project. Then, in the third phase, the architects detail the design drawings and provide enough information needed for the construction phase. Afterwards, the architects are responsible for detailing all their works in documents, which is handed out to the contractors. Then, according to the documents, contractors prepare bids for their work and present them to the owner. Once a contractor is selected and is being awarded for the construction work the construction of the project begins. After the successful construction, the project can be occupied by the users.
The most important decisions on material/product selection are always made in the schematic design phase. This process continues to a lesser extent in the following phases. Usually, there are three steps of
material/product selection: research, evaluation and selection. All of the technical information of materials such as geometric properties, LEED features and testing results is collected in the first step. And learning technical information of different materials becomes crucial in this step. The second step involves confirmation of the technical information and more importantly compare different materials/products with the same functions. The final step selection often involves the use of individual criteria including the LEED rating system to make the final decision. The architect should be the one who makes the final decision about every product, including green products and the one who takes the most responsibility for material selection. In reality, the leading architect teams up with the specification writer and other architects like interior architects. The leading architect mainly concerns the visual design of the entire building. Since many green products are relatively new, only the architect can perform significant research or find verification that the product is suitable and code-compliant. The Interior architect makes interior design and selects materials for interior use. The specification writer often helps architects with materials selection by collecting and classifying the information of materials. When the green product is suitable to use, the specification writer can incorporate that product in master specification and use it on other projects. Whenever possible and based on the contractual project arrangement, the contractor can give suggestions/recommendations to help architect when he or she didn’t have enough information or experience about the materials and products. Moreover, because of the contractors’ professional experiences about construction, it is possible for them to check whether the products are used for the right purpose. Also, during the process of material/product selection, the expert of materials characteristics must be the product manufacturers. To assist the architect, specification writer, or contractor with all their knowledge about materials.
Overall material/product selection criteria:
Resource efficiency
Indoor air quality
Energy efficiency
Water conservation
Affordability
Resource Efficiency can be accomplished by utilizing materials that meet the following criteria:
Recycled Content: Products with identifiable recycled content, including postindustrial content with a preference for postconsumer content.
Natural, plentiful or renewable: Materials harvested from sustainably managed sources and preferably have an independent certification (e.g., certified wood) and are certified by an independent third party.
Resource efficient manufacturing process: Products manufactured with resource-efficient processes including reducing energy consumption, minimizing waste (recycled, recyclable and or source reduced product packaging), and reducing greenhouse gases.
Locally available: Building materials, components, and systems found locally or regionally saving energy and resources in transportation to the project site.
Salvaged, refurbished, or remanufactured: Includes saving a material from disposal and renovating, repairing, restoring, or generally improving the appearance, performance, quality, functionality, or value of a product.
Reusable or recyclable: Select materials that can be easily dismantled and reused or recycled at the end of their useful life.
Recycled or recyclable product packaging: Products enclosed in recycled content or recyclable packaging.
Durable: Materials that are longer lasting or are comparable to conventional products with long life expectancies.
Indoor Air Quality (IAQ) is enhanced by utilizing materials that meet the following criteria:
Low or non-toxic: Materials that emit few or no carcinogens, reproductive toxicants, or irritants as demonstrated by the manufacturer through appropriate testing.
Minimal chemical emissions: Products that have minimal emissions of Volatile Organic Compounds (VOCs). Products that also maximize resource and energy efficiency while reducing chemical emissions.
Low-VOC assembly: Materials installed with minimal VOC-producing compounds, or no-VOC mechanical attachment methods and minimal hazards.
Moisture resistant: Products and systems that resist moisture or inhibit the growth of biological contaminants in buildings.
Healthfully maintained: Materials, components, and systems that require only simple, non-toxic, or lowVOC methods of cleaning.
Systems or equipment: Products that promote healthy IAQ by identifying indoor air pollutants or enhancing the air quality.
Energy Efficiency can be maximized by utilizing materials and systems that meet the following criteria:
Materials, components, and systems that help reduce energy consumption in buildings and facilities.
Water Conservation can be obtained by utilizing materials and systems that meet the following criteria:
Products and systems that help reduce water consumption in buildings and conserve water in landscaped areas.
Affordability can be considered when building product life-cycle costs are comparable to conventional materials or as a whole, are within a project-defined percentage of the overall budget.
SUSTAINABLE MATERIALS
WOOL BRICK
SUSTAINABLE CONCRETE
SOLAR TILES
PAPER INSULATION
TRIPLE-GLAZED WINDOWS
BAMBOO
ADOBE
CLAY
CORK
RECYCLED RUBBER
STRAW
FLYASH BRICKS
WOOL BRICKS
Wool bricks reinforced with wool to obtain a composite that is more sustainable, non-toxic, using abundant local materials, and that mechanically improve the bricks' strength.
The wool fibers were added to the clay material used in the bricks, using alginate conglomerate, a natural polymer found in the cell walls of seaweed. The mechanical tests carried out showed the compound to be 37% stronger than other bricks made using unfired stabilized earth.
Advantages of environmentally-friendly bricks The researchers studied the effect of reinforcing various soil types with sheep's wool, and arrived at various conclusions. "These fibres improve the strength of compressed bricks, reduce the formation of fissures and deformities as a result of contraction, reduce drying time and increase the bricks' resistance to flexion."
This piece of research is one of the initiatives involved in efforts to promote the development of increasingly sustainable construction materials. These kinds of bricks can be manufactured without firing, which contributes to energy savings. According to the authors: "This is a more sustainable and healthy alternative to conventional building materials such as baked earth bricks and concrete blocks."
SUSTAINABLE CONCRETE Concrete is a friend of the environment in all stages of its life span, from raw material production to demolition, making it a natural choice for sustainable home construction. Here are some of the reasons why, according to the Portland Cement Association and the Environmental Council of Concrete Organizations: Resource efficiency. The predominant raw material for the cement in concrete is limestone, the most abundant mineral on earth. Concrete can also be made with fly ash, slag cement, and silica fume, all waste byproducts from power plants, steel mills, and other manufacturing facilities. Durability. Concrete builds durable, long-lasting structures that will not rust, rot, or burn. Life spans for concrete building products can be double or triple those of other common building materials. Thermal mass. Homes built with concrete walls, foundations, and floors are highly energy efficient because they take advantage of concretes inherent thermal massor ability to absorb and retain heat. This means homeowners can significantly cut their heating and cooling bills and install smaller-capacity HVAC equipment. Reflectivity. Concrete minimizes the effects that produce urban heat islands. Light-colored concrete pavements and roofs absorb less heat and reflect more solar radiation than dark-colored materials, such as asphalt, reducing air conditioning demands in the summer. Minimal waste. Concrete can be produced in the quantities needed for each project, reducing waste. After a concrete structure has served its original purpose, the concrete can be crushed and recycled into aggregate for use in new concrete pavements or as backfill or road base.
Concrete
SOLAR SHINGLES
Solar Shingles, also called photovoltaic shingles, are solar cells designed to look like conventional slate or asphalt shingles. There are several varieties of solar shingles, including shingle-sized solid panels that take the place of a number of conventional shingles in a strip, semi-rigid designs containing several silicon solar cells that are sized more like conventional shingles, and newer systems using various thin film solar cell technologies that match conventional shingles both in size and flexibility. Solar shingles are manufactured by several companies, but the two main manufacturers of solar roof shingles are Dow and CertainTeed.
Solar shingles are photovoltaic cells, capturing sunlight and transforming it into electricity. Most solar shingles are 12 by 86 inches (300 by 2,180 mm) and can be stapled directly to the roofing cloth. When applied they have a 5 by 86 inches (130 by 2,180 mm) strip of exposed surface. Different models of shingles have different mounting requirements. Some can be applied directly onto roofing felt intermixed with regular asphalt shingles while others may need special installation. Solar shingled roofs have a deep, dark, purplish-blue color, and therefore look similar to other roofs in most situations. Homeowners may prefer solar shingles because they avoid having large panels on their roofs.
COST Older solar shingle designs were more expensive to install than traditional PV panels, but new, more efficient designs such as thin-film copper indium gallium selenide (CuInxGa(1-x)Se2) cells can be installed in 10 hours, compared with the 22 to 30 hours required for the installation of traditional panels. The lower cost of installation dramatically reduces the cost of solar power implementation.[1] All photovoltaic power is produced in the form of direct current (DC). The standard in homes is alternating current (AC). Therefore part of the cost of installation of solar shingles is the price of an inverter to convert DC to AC. The most inexpensive way to install solar shingles is to use the grid as a backup source of electricity. Backup storage, in the form of batteries, is expensive, adds complexity to the installation, and is uneconomic in any large scale. Battery backup units require an array of additional hardware. This includes batteries, battery enclosures, battery charge controllers, and separate sub panels for critical load circuits. However, grid power is only useful as a backup system if it is available when solar power is not.
SOLAR TILES
PAPER/CELLULOSE INSULATION The word cellulose comes from the French word for a living cellule and glucose, which is sugar. Building insulation is low-thermal-conductivity material used to reduce building heat loss and gain, and reduce noise transmission. Cellulose insulation is plant fiber used in wall and roof cavities to insulate, draught proof and reduce noise. There are several types of insulation that can be used in walls, floors, and ceilings. Insulation materials play a primary role in achieving high energy efficiencies in buildings. There has been concern over the health impacts of the material constituents of insulation ever since the problems associated with asbestos became apparent, followed by the banning of urea formaldehyde based insulation. Some health concerns have spread to potential inhalation of fiberglass and cellulose insulation fibers and dust.
HISTORY Cellulose is among the oldest types of building insulation material. Many types of cellulosic materials have been used, including newspaper, cardboard, cotton, straw, sawdust, hemp and corncob. Monticello was insulated with a form of cellulose. Modern cellulose insulation, made with recycled newspaper using grinding and dust removing machines and adding a fire retardant, began in the 1950s and came into general use in the US during the 1970s. PAPER INSULATION PANELS Made from recycled newspapers and cardboard, paper-based insulation is a superior alternative to chemical foams. Both insect resistant and fire-retardant thanks to the inclusion of borax, boric acid, and calcium
carbonate (all completely natural materials that have no associations with health problems), paper insulation can be blown into cavity walls, filling every crack and creating an almost draft-free space. PRODUCTS Four major types of loose-fill cellulose products have been developed under a variety of brand names. These are generally characterized as dry cellulose, spray applied cellulose, stabilized cellulose, and low dust cellulose. These types are used in different parts of a building and for different reasons. Dry cellulose (loose fill) Dry cellulose is used in retrofitting old homes by blowing the cellulose into holes drilled into the tops of the walls. It can also be blown into a new wall construction by using temporary retainers or netting that is clamped in place then removed once the cellulose has reached the appropriate density. This form of application does settle as much as 20% but the stated R-value of the cellulose is accurate after settling occurs. In addition, a dense-pack option can be used to reduce settling and further minimize air gaps. Dense-pack places pressure on the cavity, and should be done by an experienced installer. Loose fill in walls is an antiquated technique of using cellulose in wall cavities. The home performance industry and its accrediting bodies support the dense-pack standard of insulating wall cavities, which does not settle. This method stops the stack effect and convective loops in wall cavities. Spray-applied cellulose (wet-spray cellulose) Spray-applied cellulose is used for applying cellulose to new wall construction. The differences are the addition of water to the cellulose while spraying as well as adding some kind of moisture retardant such as chlorine to prevent mold cultures. In some cases the insulation might also mix in a very small percentage of adhesive or activate a dry adhesive present in the cellulose. Wet-spray allows application without the need for a temporary retainer. In addition, wet-spray allows for an even better seal of the insulated cavity against air infiltration and eliminates settling problems. Wet-spray installation requires that the wall be allowed to dry for a minimum of 24 hours (or until maximum of 25% moisture is reached) before being covered. Stabilized cellulose Stabilized cellulose is used most often in attic/roof insulation. It is applied with a very small amount of water to activate an adhesive of some kind. This reduces settling and decreases the amount of cellulose needed. This can prove advantageous at reducing the overall weight of the product on the ceiling drywall helping prevent possible sag. This application is ideal for sloped roofs and has been approved for 5:12 (41.66%) slopes.
Low-dust cellulose
The last major type of cellulose insulation on the market is low-dust variety. Nuisance levels of dust are created during application of most types of dry insulation causing the need for simple dust masks to be worn during installation. This kind of cellulose has a small percentage of oil or similar dust dampener added. This may also be appropriate to homes where people are sensitive to newsprint or paper dust (though new dust will not be created after installation).
ADVANTAGE OF PAPER INSULATION
Thermal performance The thermal performance of loose filled cellulose compares favorably to other types of low cost insulation, but is lower than that of polyurethane and polyisocyanurate foams. The thermal conductivity of loose-fill cellulose is approximately 40 mW/m·K (an R-value of 3.8 per inch) which is about the same as or slightly better than glass wool or rock wool. This doesn’t represent the whole picture of thermal performance. Other important aspects are how well the building envelope is seals from air infiltration, convective airflows, and thermal bridging. Cellulose is very good at fitting around items in walls like pipes and wiring, leaving few air pockets that can reduce the overall efficiency of the wall. Dense pack cellulose can seal walls from air infiltration while providing the density to limit convection, when installed properly. The University of Colorado School of Architecture and Planning did a study that compared two seemingly identical test structures, one insulated with cellulose and the other with fiberglass. The cellulose insulation lost 26.4% less heat energy over time compared to the fiberglass insulation. It also was shown to tighten the structure more than 30%. Subsequent real world surveys have cellulose performing 20-30% better at reducing energy used for heating than fiberglass. Compared to closed cell, Polyurethane foam insulation (R=5.5 to 6.5 per inch), cellulose has a lower R-value per inch, but is much less expensive; foam has a higher cost per equivalent R-value.
Long-term cost savings Annual savings from insulating vary widely and depend on several factors, including insulation thickness, original wall performance, local climate, heating/cooling use, airtightness of other building elements and so on. One installer claims cellulose insulation "can save homeowners 20 to 50 percent on their utility bills".
Sound insulation Insulation reduces sound travelling through walls and between floor levels. Cellulose provides mass and damping. This reduces noise in 2 ways, it reduces the lateral movement of sheetrock and attenuates the passage of sound along cavities. Cellulose is approximately three times denser than fiberglass, providing a slight improvement in sound reduction. Mold and pest control The borates in cellulose insulation provide added control against mold. Installations have shown that even several months of water saturation and improper installation did not result in mold. It is a common misconception that the mere presence of crude borates in cellulose insulation provides pest control properties to the product. While boric acid itself does kill self-grooming insects if ingested, it must be presented to an insect in both sufficient concentration and in an ingestible form in order to achieve insect fatality. Proper testing of products containing borates must be performed in order to determine whether dosage and presentation are sufficient to kill insects. Once tested, registration with the EPA as a pesticide is required before a product may be touted as having pesticidal capabilities in the USA.
Fire retardation The borate treatment also gives cellulose the highest (Class I) fire safety rating. Many cellulose companies use a blend of ammonium sulfate and borate.
Vapor barrier A vapor barrier may not be needed with cellulose insulation. For example, recent studies have shown that air movement is the primary method by which excessive moisture can accumulate in mild marine climate such as Portland, OR, USA. An insulation that fills the wall cavity completely (such as cellulose or foam) can help prevent moisture problems. Recommendations against using vapor barriers with cellulose insulation are supported by studies, even though they classify cellulose as vapor permeable. In addition, cellulose acts to distribute moisture throughout the cavity, preventing the buildup of moisture in one area and helping to dry the moisture more quickly. Cellulose manufacturers do not recommend the installation of a vapor barrier with cellulose. Most US city codes will require a vapor barrier for any external wall. Most US cities will consider an appeal of the requirement if proper reasoning is provided. In March 2008 The US city of Portland, Oregon, approved an appeal to waive the requirement for a vapor barrier/retarder when using cellulose insulation. The appeal can be
viewed in the Portland Bureau of Development Services search form by searching for appeal ID 4996. Fundamental to any appeal is mentioning that recent studies show air movement is the primary problem for vapor, that cellulose is an effective barrier to air movement, and that cellulose acts to diffuse vapor.
DISADVANTAGES Cellulose has a few disadvantages. As compared to other insulation options, the R-value of 3.6 to 3.8 per inch is good but not the best. Cost per R-value is good. Spray foam has many of the same benefits as wet-spray cellulose (such as sealing the cavity), while having advantages in R-value and rigidity and air sealing. Many spray foams utilize an environmentally harmful blowing agent, such as Enovate HFC, cellulose does not.
Dust Cellulose contains some small particles which can be blown into the house through inadequate seals around fixtures or minute holes.
Installation expertise and building codes In some areas it can be difficult to locate installers that are experienced with cellulose. An experienced installer understands how to correctly dense-pack loose fill dry cellulose, how to best apply stabilized (partly wet) cellulose on sloped surfaces, and the proper time required for wet-spray cellulose to dry. As with other non-batt insulation, US city and regional/state building codes may not be updated for cellulose insulation. Homeowners should call the city to verify that the insulation will be approved, and it may be necessary to provide product specifications to the city. This is not difficult, and the installer and the manufacturer should both be willing to handle this process, saving the homeowner any true effort.
Slumping If improperly installed, loose fill cellulose could settle after application. In some situations this could leave areas of wall uninsulated. With correct training in installation methods and quality control techniques this is ruled out by installing to tested densities preventing any future settlement.
Weight
For a given R-value, loose cellulose weighs roughly three times as much per square foot as loose fiberglass. Ceiling structures should be inspected for signs of weakness before choosing a material for insulating the ceilings of existing structures.
Offgassing Many cellulose companies use a blend of ammonium sulfate and borate for fire retardation. Although ammonium sulfate is normally odorless, unexplained emission of ammonia and a resulting ammonia smell has been found in some cases. Mold There is some evidence of increased mold infestation inside buildings insulated with wet spray dense pack cellulose especially when used with a vapor barrier. ENVIORMENTAL PROPERTIES
Recycled content Cellulose is composed of 75-85% recycled paper fiber, usually post-consumer waste newsprint. The other 15% is a fire retardant such as boric acid or ammonium sulphate. Cellulose has the highest recycled content of any insulation available. For example, fiberglass has a maximum amount of 50% recycled content.
Low toxicity and environmental impact of raw materials The non-recycled components of cellulose insulation are still environmentally preferable to the raw materials of most other insulation types. Unlike foam insulations, many of which use HFC or HCFC blowing agents which have global warming potential higher than that of carbon dioxide, cellulose does not produce significant gaseous emissions. Toxicity of the raw materials of insulation types is typically highest during manufacture or installation. Neither is a significant issue with cellulose. OSHA states that cellulose is a dust nuisance, requiring a dust mask during installation. This compares very favorably to the potential NIOSH cancer risk of fiberglass.
Embodied energy
The embodied energy of cellulose insulation is the lowest of the popular insulation types. It requires 20 to 40 times as much energy to produce furnace-made insulation materials compared to cellulose. Cellulose is made by electrically powered machines while mineral insulation is made in fuel powered furnaces, reducing this advantage to a degree, as electricity generation is less than 50% efficient. If electricity is sourced from renewable energy sources, the efficiency of electric production does not matter as efficiency is not a precondition for sustainability. Cellulose is made with locally available paper, while mineral insulation factories ship materials and products over greater distances. Cellulose insulation uses borates for fire retardation. Borates are a non-renewable mined product.
Insulation is green All insulation helps make buildings more energy efficient. Using cellulose insulation can contribute to obtaining LEED credits in the US Green Building Council certification program. It can earn credit in two categories: the Energy and Atmosphere energy performance category and the Materials and Resources recycled content category.
PRODUCT SAFETY Cellulose insulation can be very dusty during installation and it is recommended that a standard dust mask be worn while working. There is slight concern over the off gassing of ink from the newspapers but the material is sealed behind walls, and no studies have shown this as an issue.
TRIPLE GLAZED WINDOWS
Triple glazing is today standard for energy efficient windows. The difference between double glazing is vast, particularly because of the extra air gap between the panes. Triple glazing is the solution for large windows, that used to mean major heat loss in winter. Triple glazed windows now make it possible to build with light and space, which is widely used in modern homes. The rough and ready method of comparing the energy performance of windows is to use the U value measurement, just as we do with walls, floors and roofs. Traditional windows, with a single pane of glass in them, have a U value in excess of 5. Double glazing used to score over 3, but, over the years, the manufacturing
process has undergone a number of improvements and currently the Building Regulations insist that any window you install today should have a U value no worse than 1.6. Triple glazing is widely used in cold climate countries like Sweden and Norway, and the ultra-low energy PassivHaus standard requires triple glazed windows with a U value of no more than 0.8. To get a window with such a low U value, you have to not only switch to triple glazing but also insulate the frame itself, as well as using more expensive manufacturing techniques — the gas krypton tends to be used, instead of argon. The key benefits are really to do with comfort. If you insulate the walls, roof and floor of a house, and you ignore the glazing, you end up with cold spots surrounding the windows at night, which cause draughts, draw heat away from you if you sit next to them, and result in streams of condensation running down the panes. So, in essence, the standard of glazing has to match the standard of the insulation elsewhere in the house, so that the warm wrapping around the house performs consistently. Which is where triple glazing comes in. Because if double glazing makes a modern house more comfortable to live in, triple glazing makes it even more so. The physics involved here have been worked out in Germany by the PassivHaus Institute. It has shown what happens to surface temperatures on various forms of glazing when it gets really cold outside, and the internal air temperature is designed to be at 21°C:
Next to a single glazed window, the internal surface temperature is around 1°C.
Next to a double glazed window (2000 vintage), the surface temperature is around 11°C.
Next to a modern, energy-efficient double glazed window, the surface temperature is 16°C.
Next to a triple glazed window, with a Centre-pane U value of just 0.65, the temperature is 18°C.
So you can see that whilst a double glazed window is perfectly adequate, a triple glazed one is just that much more comfortable, because it hangs onto heat just that little bit better. Benefits of Triple Glazed Windows
Offer a more rigid and strength window
Great selection on extreme weather
Excellent resistance to condensation problems
Helps reduce sound transmission
Better energy saver than regular and double glazed windows
Triple glazed windows can decrease relativeheat loss
Increases thermal comfort inside the building
A combination of double glazed windows and triple glazed windows can be used with the building orientation to obtain excellent results.
Insulated hollow frames can increase triple glazed windows performance. Cons of Triple Glazed Windows
The weight of triple glazed windows can be a problem with weaker sash materials.
Triple glazed casements have width limitations
Slightly higher prices than double glazed window
Some casement type windows could have a restriction when opened.
If an existing structure has little or no wall insulation, triple glazed windows are not recommended.
ADOBE Adobe is probably one of the most sustainable elements that can be used to construct buildings. It is made from clay and dirt, which are abundant in the earth and do not require a lot of processing in order to harvest. Other natural materials, such as straw or even dung, can be added to the clay in order to harden and insulate it better.
Although adobe is not necessarily something that can be taken out of the ground, it is a very simple process that makes it even more useful for an environmentally friendly building. In order to make adobe bricks one must mix water with the clay and other items until it can be shaped into a solid block. Rather than using the concrete red bricks, adobe is an awesome alternative that will be the exact thing that your house needs to be more energy efficient and sustainable.
INSULATION WITH ADOBE For people who are a little more worried about using adobe to build their constructs, it can also be used for insulation. Many parts of traditionally built houses are poorly insulated, which leaves them susceptible to energy inefficiencies. Spending more money on energy costs can be avoided by simply using adobe for insulation in the house.
In addition to saving money, this is also beneficial for the planet. It is a sustainable practice to cut the usage of fossil fuels and other energy sources that are bad for the environment. For this reason, using adobe as insulation is not only cheap and cost effective, but it is also great for the environment. These are both things that anyone involved in the sustainable movement would appreciate.
Nonetheless, many people do not use adobe because it seems like a primitive way to insulate or construct a building. This mindset is outdated and should be quickly reversed in society. Thankfully, the sustainable movement has made great strides in the past few decades to help people overcome their prejudices to many environmentally friendly materials.
CLAY A material that many people use in order to promote sustainable building is clay. This is one of the most, if not the most, sustainable material that anyone can use for a construction project. The best part about the clay is the lack of processing that is required to get it out of the ground and then on to your home. This saves energy, emissions, and makes it a material that is worthwhile for use in any sustainable construction project. Below is an introduction to clay and the uses that are possible for your building project. Clay Harvest One reason that clay is such a great sustainable material is because of the harvesting method that makes it so easy to produce. Taking clay out of the ground is one of the main steps and probably the most processing that goes on throughout the entire system. Once the clay has been taken out of the earth one can add water in order
to shape the clay into bricks or even add a few other sustainable materials, such as straw or sand, in order to strengthen the actual material. Nonetheless, much of the reason that sustainable is good for the environment is because it is a product of earth that should be utilized when constructing out buildings. More importantly, the lack of processing required to get the clay out of the ground is an indicator of the energy efficiency that many sustainable products are capable of providing.
Building with Sustainable Clay As mentioned previously, clay is one of the best materials that one can use in order to build a sustainable construction. The clay is usually added to straw, sand, and then water in order to make bricks that are used as walls. These walls are not subject to becoming moist and breaking apart as there are still homes in Wales that maintain their structure after hundreds of years of rain.
In addition to using as a solid building material, it is also acceptable to use clay as an insulator to the weather. This will allow homes to maintain their heat during the winter months and maintain the comfortable temperatures during the summer months. More importantly, it is a natural way to provide energy efficiency so buildings are not using too much in order to maintain the proper temperature.
Clay is a sustainable construction material that has been used by humans for centuries. It is so easy to excavate from the ground that there is little processing that is required, which means that energy and many timeconsuming processes are spared. As a construction material, the clay acts as a perfect brick for building outdoors no matter where you live. Additionally, the bricks can be used for insulation in order to save money on many traditional methods. Saving money on the energy bill is also a possibility given that buildings will be much more energy efficient with this kind of insulator. It is obvious that the sustainable construction movement is on the right track.
CORK Like hemp and rubber, cork is another sustainable material that has been used in the United Kingdom and the rest of the world to build sustainably constructed structures for many years. Cork is a unique material that is harvested mainly in Portugal for a number of things. However, within recent years many people in the sustainable movement have found uses for cork in building projects.
Cork is a great insulating material. It keeps warmer in the winter and cooler in the summer. The energy efficiency aids in cutting energy bills in the winter. It is much more energy efficient than either Armstrong laminate flooring or discount wood flooring. Cork is also good for sound insulation. Cork as Bricks There are a number of sources of sustainable bricks to choose from. Some people use larger brick options, such as straw, which can be placed in bales and stacked into walls. However, other people use adobe, which is a clay and straw mixture with water in order to seal their homes or buildings. These two forms of bricks have a long history and humans have been using them for many centuries. However, new research and technology has allowed people to build certain buildings with cork.
It is no surprise that the sustainable movement has gained so much traction over the past few years. Within only a short period of time they have been able to introduce completely new materials that are not only environmentally friendly, but also cost efficient. One of the biggest problems with the environmental movement is that it is seen as inefficient for building cheaply. However, this has been proven false time and time again. Cork is yet another material that can be used instead of the unsustainable materials that are currently being utilized for construction projects.
Harvesting of Cork One great aspect of cork is that it is so easy to harvest and is in great abundance. Most uses for cork are not very substantial, such as wine stoppers. There are many hectares of cork in the world, which makes it an abundant resource that will regenerate far faster than humans can use it for construction projects. At the current rate there is too much cork in Portugal and many other places in the world, which is unlike many other products, like timber.
Timber is usually commercially cut in huge swathes which disrupt the ecosystem and contribute to deforesting on a large scale. It is unfortunate that these events happen, but the sustainable community has started using cork in greater quantities in order to reverse this trend.
PROPERTIES AND USE
Cork's elasticity combined with its near-impermeability makes it suitable as a material for stoppers.
Cork's bubble-form structure and natural fire retardant make it suitable for acoustic and thermal insulation in house walls, floors, ceilings and facades. The by-product of more lucrative stopper production, corkboard is gaining popularity as a non-allergenic, easy-to-handle and safe alternative to petrochemical-based insulation products which are flammable and emit highly toxic fumes when burned.
Sheets of cork, also often the by-product of stopper production, are used to make bulletin boards as well as floor and wall tiles.
Granules of cork can also be mixed into concrete. The composites made by mixing cork granules and cement have lower thermal conductivity, lower density and good energy absorption. Some of the property ranges of the composites are density (400–1500 kg/m³), compressive strength (1–26 MPa) and flexural strength (0.5– 4.0 MPa).
STRAW For many years straw has always been a bi-product that was not used effectively. Due to the popularity of the sustainable movement there have been great strides to utilise straw as a building material for people all over the United Kingdom and the rest of the world. There are uses for straw for construction purposes and insulation, which makes it a versatile option in comparison with fibreglass and many other materials that are not sustainable. Additionally, straw is an incredibly cheap option for people who want to build their homes on a budget. There is nothing better than maintaining a budget and still helping the environment tremendously as well.
Straw Bales Construction In many cases straw bales are created in order to provide construction materials for certain projects. Simple homes can be created with straw bales and even more sophisticated buildings can use the bales for some areas. Although the strength is lacking in comparison with some other materials, if made correctly, the bales of straw can actually provide great protection against the elements. More importantly, they can provide the necessary construction benefits with sustainable methods rather than using out of date products that are harmful to the environment and the overall goals of sustainability.
There are a number of homes, including upper-scale buildings, that have been built purely with straw bales. There is a higher susceptibility to rot when using straw as a sustainable material, but the availability, cost, and renewable resource all make it worth the effort and risk.
Straw as Insulation While construction is certainly possible on some smaller scales, it is often a good idea to use straw as insulation at the very least. Compared with many different forms of insulation that are currently used, straw is much more effective because it can be packed much tighter than others. Nonetheless, it has not received the level of praise that it should, given the unique capability to seriously enhance the energy efficiency of a home.
Sustainable materials are an important aspect of constructing in a responsible manner, but so is energy efficiency. People who have homes build out of sustainable materials are not helping if they must spend large amounts of energy in order to heat or cool buildings. Instead, using straw can provide a great insulation that will make the goals of sustainability easier to realize. Sustainable Material – Straw
There are many reasons to use sustainable materials in order to build your home. Using straw to build the home completely will save you a lot of money, but will also offer you the ability to protect the environment and embark on the task of maintaining sustainability in your life. However, for those who would like to take less risk and use straw for insulation over traditional methods, then that is a great alternative as well. The insulation is perfect because it can increase the sustainability of a home while also working on energy efficiency. Protecting the earth and environment are the ultimate goals of sustainability, which is why straw is so useful.
THERMAL PROPERTIES
Compressed straw bales have a wide range of documented R-value. R-value is a measurement of a materials insulating quality, higher the number the more insulating. The reported R-value ranges from 17-55 depending on the study, differing wall designs could be responsible for wide range in R-value. Bale walls are typically coated with a thick layer of plaster, which provides a well-distributed thermal mass, active on a short-term (diurnal) cycle. The combination of insulation and mass provide an excellent platform for passive solar building design for winter and summer. Compressed and plastered straw bale walls are also resistant to fire.
METOD Straw bale building typically consists of stacking rows of bales on a raised footing or foundation, with a moisture barrier or capillary break between the bales and their supporting platform. There are two types of straw-bales commonly used, those bound together with two strings and those with three. The three string bale is the larger in all three dimensions. Bale walls can be tied together with pins of bamboo, rebar, or wood (internal to the bales or on their faces), or with surface wire meshes, and then plastered, either with a cement-based mix, lime-based formulation, or earth/clay render. The bales may actually provide the structural support for the building ("load-bearing" or "Nebraska-style" technique), as was the case in the original examples from the late 19th century. The plastered bale assembly also can be designed to provide lateral and shear support for wind and seismic loads. Alternatively, bale buildings can have a structural frame of other materials, usually lumber or timber-frame, with bales simply serving as insulation and plaster substrate, ("infill" or "non-loadbearing" technique), which is most often required in northern regions and/or in wet climates. In northern regions OVERVIEW Straw is a renewable resource that acts as excellent insulation and is fairly easy to build with. Care must be taken to assure that the straw is kept dry, or it will eventually rot. For this reason it is generally best to allow a straw bale wall to remain breathable; any moisture barrier will invite condensation to collect and undermine the structure. Other possible concerns with straw bale walls are infestation of rodents or insects, so the skin on the straw should resist these critters. There are two major categories of building with straw bales: load-bearing and non-load bearing. A post and beam framework that supports the basic structure of the building, with the bales of straw used as infill, is the most common non-load bearing approach. This is also the only way that many building authorities will allow. While there are many load- bearing straw bale buildings that are standing just fine, care must be taken to consider the possible settling of the straw bales as the weight of the roof, etc.
compresses them. Erecting bale walls can go amazingly quickly, and does not take a lot of skill, but then the rest of the creation of the building is similar to any other wood framed house. In fact straw bale houses typically only save about 15% of the wood used in a conventionally framed house. The cost of finishing a straw bale house can often exceed that of standard construction, because of the specialized work that goes into plastering both sides of the walls. The result is often worth it though, because of the superior insulation and wall depth that is achieved
.
RECYCLED RUBBER There are many uses for rubber and none of them are more apparent than in sustainable construction. Although many people think of rubber as a synthetic product, it is actually harvested from the rubber tree, which obviously a renewable resource. Recycled rubber is even more useful because it does not require additional harvesting of rubber, but instead just builds upon already used materials. Even though rubber in itself is already a renewable resource that can be sustainable, using rubber is one of the best ways to complete any construction project in an environmentally conscious way.
Rubber Effectiveness and Sustainability Unlike many other types of trees, the rubber tree provides a great product that can be used in a number of ways. Although in construction there are limits to how rubber can be used, the tree nonetheless provides an effective and sustainable material for building. Rubber is easy to install as flooring for buildings, which makes it a great alternative to other types of materials that are not sustainable or efficient for the home. The quality is what makes the product so fascinating for your home. The rubber is resistant to fading in comparison to many other types of flooring and people who smoke will find the cigarette burn resistance even more compelling. Overall, one of the most effective types of flooring that can be used in the modern age is rubber. In the United Kingdom many building projects have already converted to the material in an effort to become more efficient, long lasting, and sustainable.
Recycled Rubber Another reason to use rubber in the home is that it can be recycled for consumption. Whereas many other types of sustainable resources are just produced naturally with a moral regenerative mindset, the rubber is actually recycled so that you do not have to worry about how it is harvested from the tree. There are no trees that get tapped or harvested when recycled rubber is used.
For people who are truly trying to build a sustainable home, there is nothing better than using recycled materials. There are types of aluminum and others that are recycled for use in the home, but using natural products multiple times is one of the best ways to build a sustainable construction.
TIRE PYROLYSIS The pyrolysis method for recycling used tires is a technique which heats whole or shredded tires in a reactor vessel containing an oxygen-free atmosphere. In the reactor the rubber is softened after which the rubber polymers break down into smaller molecules. These smaller molecules vaporize and exit from the reactor. These vapors can be burned directly to produce power or condensed into an oily type liquid, generally used as a fuel. Some molecules are too small to condense. They remain as a gas which can be burned as fuel. The minerals that were part of the tire, about 40% by weight, are removed as a solid. When performed well a tire pyrolysis process is a very clean operation and has nearly no emissions or waste. The properties of the gas, liquid, and solid output are determined by the type of feedstock used and the process conditions. For instance whole tires contain fibers and steel. Shredded tires have most of the steel and sometimes most of the fiber removed. Processes can be either batch or continuous. The energy required to drive the decomposition of the rubber include using directly fired fuel (like a gas oven), electrical induction (like an electrically heated oven) or by microwaves (like a microwave oven). Sometimes a catalyst is used to accelerate the decomposition. The choice of feedstock and process can affect the value of the finished products. TIRE-DERIVES PRODUCTS Tires can be reused in many ways, although again, most used tires are burnt for their fuel value. In a 2003 report cited by the U.S. EPA, it is stated that markets ("both recycling and beneficial use") existed for 80.4% of scrap tires, about 233 million tires per year. Assuming 22.5 lbs per tire, the 2003 report predicts a total weight of about 2.62 million tons from tires. One stage of tire recycling involves the production of alternate products for sale. New products derived from waste tires generate more economic activity than combustion or other low multiplier production, while reducing waste stream without generating excessive pollution and emissions from recycling operations.
Construction materials. Entire homes can be built with whole tires by ramming them full of earth and covering them with concrete, known as Earthships. They are used in civil engineering applications such as sub-grade fill and embankments, backfill for walls and bridge abutments, sub-grade insulation for roads, landfill projects, and septic system drain fields. Tires are also bound together and used as different types of barriers such as: collision reduction, erosion control, rainwater runoff, wave action that protects piers and marshes, and sound barriers between roadways and residences.
Artificial reefs are built using tires that are bonded together in groups, there is some controversy on how effective tires are as an artificial reef system, an example is The Osborne Reef Project which has become an environmental nightmare that will cost millions of dollars to rectify.
The process of stamping and cutting tires is used in some apparel products, such as sandals and as a road sub-base, by connecting together the cut sidewalls to form a flexible net.
Shredded tires, known as Tire Derived Aggregate (TDA), have many civil engineering applications. TDA can be used as a backfill for retaining walls, fill for landfill gas trench collection wells, backfill for roadway landslide repair projects as well as a vibration damping material for railway lines.
Ground and crumb rubber, also known as size-reduced rubber, can be used in both paving type projects and in moldable products. These types of paving are: Rubber Modified Asphalt (RMA), Rubber Modified Concrete, and as a substitution for an aggregate. Examples of rubber-molded products are carpet padding or underlay, flooring materials, dock bumpers, patio decks, railroad crossing blocks, livestock mats, sidewalks, rubber tiles and bricks, moveable speed bumps, and curbing/edging. The rubber can be molded with plastic for products like pallets and railroad ties. Athletic and recreational areas can also be paved with the shock absorbing rubber-molded material. Rubber from tires is sometimes ground into medium-sized chunks and used as rubber mulch. Rubber crumb can also be used as an infill, alone or blended with coarse sand, as in infill for grass-like synthetic turf products such as FieldTurf.
ENVIROMENTAL CONCERNS Due to their heavy metal and other pollutant content, tires pose a risk for the (leaching) of toxins into the groundwater when placed in wet soils. Research has shown that very little leaching occurs when shredded tires are used as light fill material; however, limitations have been put on use of this material; each site should be individually assessed determining if this product is appropriate for given conditions.
FLY ASH BRICKS
The Fly Ash Bricks are promoted as an alternative to burnt clay bricks with in the construction sector in India .
Fly-Ash Bricks are an environment friendly cost saving building product. These bricks are three times stronger than conventional bricks with consistent strength. These bricks are ideally suited for internal, external, load bearing and non-load bearing walls. These Bricks with higher strength/weight ratio (about 3 to 4 times that of burnt clay bricks) aid in designing stronger, yet more economic structures. Fly Ash Bricks are Durable, have Low water absorption, Less consumption of mortar, Economical & ecofriendly, Low energy consumption and No emission of green house gases. These bricks are not affected by environmental conditions and remain static thus ensuring longer life of the building. Also, the savings with regard to wastages in fly ash bricks are considerable during unloading and construction due to true shape and size, consistency in quality, and the workability of the fly ash bricks unlike traditional clay bricks. These bricks are very economical / cost effective, nil wastage while transporting and handling.
THE RAW MATERIALS
The raw materials for fly ash Acc Blocks are: Material
Mass
Fly Ash
45%
Sand/Stone Dust
40%
Lime
10
Gypsum
5%
Fly ash bricks are lighter than clay bricks. AAC (Autoclaved Aerated Concrete) was invented in the mid-1920s by the Swedish architect and inventor Johan Axel Eriksson. AAC is one of the major achievements of the 20th century in the field of construction. It is a lightweight, precast building material that simultaneously provides structure, insulation, and fire and mold resistance. AAC Blocks is a unique and excellent type of building materials due to its superb heat, fire and sound resistance. AAC block is lightweight and offers ultimate workability, flexibility and durability. Main ingredients include fly ash, water, quicklime, cement, aluminum powder and gypsum. The block hardness is being achieved by cement strength, and instant curing mechanism by autoclaving. Gypsum acts as a long term strength gainer. The chemical reaction due to the aluminum paste provides AAC its distinct porous
structure, lightness, and insulation properties, completely different compared to other lightweight concrete materials. The finished product is a 2.5 times lighter Block compared to conventional Bricks, while providing the similar strengths. The specific gravity stays around 0.6 to 0.65. This is one single most USP of the AAC blocks, because by using these blocks in structural buildings, the builder saves around 30 to 35 % of structural steel, and concrete, as these blocks reduce the dead load on the building significantly.
How to Make Fly Ash Bricks Most modern common bricks use a mixture of clay, sand, water and lime. This mixture is pressed into molds and then heated, or fired in a kiln at very hot (1000+ degree C) temperatures. Fly ash bricks replace the clay with fly ash, and some manufacturing processes use pressure instead of heat to cure the bricks, reducing the amount of energy required to manufacture. Fly ash has been used for years around in the world in bricks. In fact, volcano ash (very similar to coal fly ash) had been successfully used in the production of bricks all the way back in the Roman ages. As long as the fly ash brick is manufactured to and passes the same testing standards as modern clay bricks used in structures (ASTM C62), I don’t see any drawbacks to using fly ash bricks in facility construction.
FLY ASH BRICKS MACHIE
Quality of fly ash bricks depends on 3 factors –
Input material and ratio of mixing
Process of compaction and machinery
Training of personnel to ensure consistency
Brick moulds are available in the following sizes –
Size 250 X 120 x 75 mm Standard
Size 230 x 110 x 75 mm Standard
Size 230 x 110 x 75 mm Chamfered
Size 200 x 100 x 100 mm Standard
Is Fly Ash Safe? There is currently a debate in the green building community on just how safe fly ash bricks are, since fly ash is composed of chemicals that are considered toxic, including arsenic, lead, mercury, barium, boron, selenium, chromium and others.However, many of these elements (in these concentrations) are found in regular unpolluted soil, so it is difficult to say exactly how safe or unsafe they are when used in fly ash bricks. Fly Ash Bricks and LEED
There is a specific benefit to using fly ash bricks for green building and LEED projects because they are considered a recycled material. This will help earn points in Materials & Resources (MR) Credit 4, Recycled Materials. Using fly ash bricks also reduces the amount of energy used to produce regular clay bricks, and the reduction of CO2 emissions due to the energy intensive process to produce those bricks in a 1000 degree C kiln. Other benefits include the reduction of fly ash waste going to landfills or being stored in a retention pond, which can be hazardous and potentially dangerous. All in all, I think that the direct and indirect benefits of using fly ash bricks outweigh the potential consequences, and that their use will help a construction project to be more sustainable. ADVANTAGES 1. High Fire Insulation 2. Due to high strength, practically no breakage during transport and use. 3. Due to uniform size of bricks mortar required for joints and plaster reduces almost by 50%. 4. Due to lower water penetration seepage of water through bricks is considerably reduced. 5. Gypsum plaster (plaster of Paris) can be directly applied on these bricks without a backing coat of lime plaster. 6. These bricks do not require soaking in water for 24 hours. Sprinkling of water before use is enough.
DISADVANTAGES 1. Mechanical strength is weak. But this can be rectified by adding marble waste, or Mortar between blocks. 2. Limitation of size. Only modular size can be produced. Large size will have more breakages.
The basic chemistry and technology based on which FLY-ASH Bricks is manufactured has been successfully applied in major construction project across the globe , namely:-
a)
Akashi Kaikyo Bridge
Japan
b)
Hungry House Dam
USA
c)
Euro Tunnel
United Kingdom/ France
QUALITY OF FLY ASH BRICKS
1. FLY-ASH Bricks are eco friendly as it protects environment though Conservation of top soil and utilization of waste products of coal or lignite based Thermal Power Plants. 2. It plays a vital role in the abetment of carbon-die-oxide a harmful green house gas mass emission of which is threatening to throw the earth’s atmosphere out of balance. 3. It is three times stronger then the conventional burnt clay bricks. 4. Its size of 250 x120 x 75 mm is derived from the modular concept giving perfect finish to both faces, whereby up to 30%cement mortar can be saved during laying and plastering thus reducing the cost of construction. 5. As no clay is used in the manufacture of FLY-ASH Bricks the scope of efflorescence is negligible. 6. It continues gaining strength on watering ever after installation. 7. Loss-due to breakage under standard working condition is less then one percent. 8. Use of FLY-ash Bricks results in 100RFT -8.33sq ft each side, which enhances valuation of built up property. 9. Fly-Ash Bricks is lighter than the conventional clay bricks as it weight around 3 to 3.2 Kgs per bricks.
Comparison between Clay brick and Fly ash Brick
Clay Brick
Fly Ash Brick
Varying colour as per soil
Uniform pleasing colour like cement
Uneven shape as hand made
Uniform in shape and smooth in finish
Lightly bonded
Dense composition
Plastering required
No plastering required
Heavier in weight
Lighter in weight
Compressive strength is around 35 Kg/Cm2
Compressive strength is around 100 Kg/Cm2
More porous
Less porous
Thermal conductivity
Thermal conductivity
1.25 – 1.35 W/m2 ºC
0.90-1.05 W/m2 ºC
Water absorption 20-25%
Water absorption 6-12%
Present Scenario On Fly Ash In India
Over 75% of the total installed power generation is coal-based
230 - 250 million MT coal is being used every year
High ash contents varying from 30 to 50%
More than 110 million MT of ash generated every year
Ash generation likely to reach 170 million MT by 2010
Presently 65,000 acres of land occupied by ash ponds
Presently as per the Ministry Of Environment & Forest Figures, 30% of Ash Is being used in Fillings, embankments, construction, block & tiles, etc.
Building made of fly ash bricks BAMBOO When you’re considering potential building materials for home construction as a society we tend to focus on two or three commonly utilized and widely accepted building materials: wood, stone or concrete. What you may not realize is that bamboo solutions can be used for much more than just food, musical instruments, medicine, paper and textiles. Uses for bamboo can also include building construction, both in exterior and interior design elements. Widely used in Asian, Pacific Islander and Central and Southern American cultures, bamboo is a sustainable and sturdy building material. Unlike wood, bamboo (a member of the grass family) regenerates very quickly. It is, in-fact, one of the fastest growing plants in the world, with the fastest growth rate reaching 100cm in a 24-hr period1. In contrast to tree harvesting, there is simply no comparison to the replenishment rate of growing bamboo. Bamboo can be harvested every three to six years for construction purposes (depending on the species); whereas trees range from 25 years (for softwoods) to 50 years (for hardwoods). It is important to harvest the bamboo at the right time to maximize strength and minimize damage brought on by pests. Making more use of bamboo for common building practices would allow forests to regenerate and help to prevent future deforestation efforts. Bamboo is a very fast growing, renewable and easy-to-grow resource. There are over 1000 species of bamboo. Bamboo grows in tropical and temperate environments and is very hardy, not needing pesticides or herbicides to grow well. It is a type of grass and grows from it's roots, when it is cut it quickly grows back. Most species mature in 4-5 years. It sequesters carbon dioxide and is carbon neutral.
Benefits of Bamboo Technically a grass, bamboo has been used in decorations and a number of other assortments, but has only recently been used on a large scale for floors. Perhaps as a result of the sustainable movement, the material has become increasingly popular. However, even though it a sustainable resource, it is also a cost effective one. Although laminates are cheaper for flooring, most traditional hard wood flooring costs more money than bamboo does.
The benefits of bamboo are many fold. First of all, it is a natural anti-bacterial that will help buildings where there are children or people who cannot be in contact with bacteria for fear of sickness. Another great feature of bamboo is that it is water resistant, which makes it a better choice than many other hardwood floors that can stain or deteriorate when any kind of moisture gets in contact. It is also an extremely durable piece of material that is easy to move, yet still hard enough to provide you with great flooring.
For those who like do it yourself projects, there are a number of options with grooves and tongues that allow for easy installation. Nonetheless, if you want the best fit and installation you might want to hire a professional to do it for you.
Harvesting Bamboo Luckily the harvesting of bamboo is also sustainable for the earth. The bamboo tree (or grass) is grown in abundance in many parts of the world. In some cases it is even problematic for landowners because they are unable to access all of their land. In any case, the bamboo is a material that is perfect for sustainable construction. They can offer great quality hardwood floors, but they do not cost much to the environment at all.
Overall, sustainable bamboo flooring is a great option for improving the building or construction plans for any project. The bamboo is a great anti-bacterial and it is also water resistant. Both of these features make it a superior product to many of the other hardwoods that are used today. Many of the rare trees that are used for wood flooring are unable to regenerate in the way that bamboo has. If you want to change the world and provide yourself with a sustainable home, then bamboo flooring is one great way to go. Not only that, but it is a much more practical product as well.
There are also a number of other benefits to choosing bamboo solutions over wood including:
Strength and Durability
Thanks to its unique composition, bamboo is naturally designed for strength...
Unlike wood, bamboo has no rays or knots, allowing it to withstand more stress throughout the length of each stalk.
Bamboo’s sectional anatomy, both as a cane and on a microscopic fiber level, enhances its structural integrity.
The high silica content in bamboo fibers means the material cannot be digested by termites.
Bamboo contains different chemical extractives than hardwood, which make it better suited for gluing. As a result, in structural engineering tests bamboo has been shown to have...
Higher tensile strength than many alloys of steel
Higher compressive strength than many mixtures of concrete
Higher strength-to-weight ratio than graphite
Fast Regeneration
Trees used for conventional wood take 30-50 years to regenerate to their full mass. In the meantime, there is less oxygen produced, less carbon dioxide consumed, and more soil runoff in the spot where the tree was harvested - all producing harmful environmental effects. When it comes to sustainability, bamboo has traditional lumber beat in every category...
Bamboo is clocked as the fastest growing plant on Earth. Some species have been measured to grow over 4 feet in 24 hours.
A pole of bamboo can regenerate to its full mass in just six months!
Bamboo can be continuously re-harvested every 3 years, without causing damage to the plant system and surrounding environment.
During the time it takes to regenerate, the bamboo plant's root system stays intact so erosion is prevented.
Continuous harvesting of this woody grass every 3-7 years, actually improves the overall health of the plant.
Why use Bamboo
Reducing cost per uses of bamboo
Increasing jobs
35% higher oxygen emission into the atmosphere than trees
40% more CO2 absorption than trees
No fertilizer or pesticides required for growth
Establishing an extensive root system into soils, which in turn draws in and stores double the amount of water into watersheds, thus preventing soil erosion.
Saving The World's Forests
Forests cover 31% of all Earth’s land.
Every year 22 million acres of forested land is lost.
1.6 billion people’s livelihoods depend on forests.
Forests are home to 80% of terrestrial biodiversity.
Trees used for timber take 30 to 50 years to regenerate to their full mass, whereas one bamboo plant can be harvested every 3 to 7 years.
Internally and externally, uses for bamboo offer a wide array of sustainable building solutions.
Internal Uses for Bamboo:
Flooring
Support columns
Electrical wire coverings
Interior walls
Eco-friendly products for kitchen and bath
External Uses of Bamboo:
Structural frames
Corner posts
Girders
Joists
Studs
Braces
Tie beams
King posts
Purlins
Ridgepoles
Rafters
Sheathing
Roofing
Exterior walls
Because of the nature of the plant, it is susceptible to deterioration agents such as insects, rot, fungi, and fire. It is important to treat the structure, inside and out. Untreated, sections of the bamboo would need to be replaced every 2 to 3 years. Some of the best preventative measures include: “Bamboo poles should be stored horizontally, laid above ground and supported to prevent sagging or bending. Bamboos should be stored in a dry, shaded and well cooled area, laid in shelving type system with the first layer not less than 50 centimeters above ground level for good air circulation. Smoking fires or heating bamboo in kilns can protect the canes from insect attack. Applying chemical coating such as are kerosene, diesel oil containing DDT and varnish can protect the canes from termites, beetles, wet rot and fungus attack.”
Bamboo solutions are a highly sustainable, cost-effective and beautiful construction material for homes. It can be used throughout the entire structure (inside and out) and if preventative measures are utilized, can last for many years. It is no wonder that Asian and Central and South American cultures have grown to rely upon this hearty grass for so many facets of their lives. One can only wonder what other uses we will find for bamboo as North America adopts an increasing focus on sustainable building. The Future of Construction
Green building is a movement dedicated to the transformation of practice in the design, operation of built environments. The objective is to reduce the negative impacts of built environments while creating healthy, comfortable, and economically prosperous places for people to live, work, and play. - U.S. Green Building Council
Green construction has been championed as the way of the future -- providing jobs, cutting energy consumption, and making efficient use of sustainable resources. According to the Environmental Protection Agency, as things stand now in the United States buildings account for...
39% of total energy use
12% of the total water consumption
68% of total electricity consumption
38% of the carbon dioxide emissions
The very dense fibers in each bamboo cane give the plant extreme flexibility, allowing it to bend without snapping. In earthquakes, a bamboo forest is actually a very safe place to take shelter, and houses made of bamboo have been known to withstand 9.0 magnitude quakes. For thousands of years bamboo has been the go-to building material for most of the world.
HAND MADE SCHOOL IN RUDRAPUR (case study)
Hand made school Place: Rudrapur, Bangladesh Architects: Anna Heringer, Eike Roswag Date: 2005
BACKGROUND To understand the greatness of this building, it is unavoidable to look into the regional situation. 80 percent of Bangladesh's population lives in great poverty in rural areas, usually in clay houses without foundations. An average lifetime of a house is 10 years. The village elite are using brick, therefore the social hierarchy is clearly reflected in the used materials as well. The architects of the project faced this fact, that for the locals the earth house is not attractive, although it is cheaper to maintain. But finally they decided to take up the challenge of using local materials to explore a new building dynamics in the design of earth-wall constructio
The school for the children of Rudapur was hand-built by local craftsmen, pupils and teachers working in collaboration with European volunteers. The building itself has a very simple and beautiful form, which is inspired by traditional village house character.. Its thick walls are made of reinforced straw and clay mud, and plastered with clay plaster and painted with a lime-based paint. They mixed earth, water, straw. (low straw contect) with the help of cows, then made mud-balls and stacked one on top of the other the mud walls. One
layer was approximately 65cm. This method called cob, but improved with some new development, such as, after one layer the required thick of wall got shaped by spades. After a drying period (1 week) the next layer could be applied. To protect the structure from damp, double layer of locally available PE-film were used, and the building has brick foundation. The roof construction is made from bamboo (local materials as well) and the roof is covered with non-insulated sheets of plate. Finally a very pleasant climate, high-level designed interior was created. The building has organic shaped cavities, which can be created due to the easily tailored properties of the wall material. Project aims It is particularly important to improve the quality of living in the rural areas in order to counteract the continuing popula- tion migration to the cities. The primary potential for developing building in the rural areas is the low cost of labour and locally available resources such as earth and bamboo. The project’s main strategy is to communicate and develop knowledge and skills within the local population so that they can make the best possible use of their available resources. Historic building techniques are developed and improved and the skills passed on to local tradesmen transforming in the process the image of the building techniques. Concept and Design METI aims to promote individual abilities and interests taking into account the different learning speeds of the school children and trainees in a free and open form of learning. It offers an alternative to the typical frontal approach to lessons. The architecture of the new school reflects this principle and provides different kinds of spaces and uses to support this approach to teaching and learning. On the ground floor with its thick earth walls, three classrooms are located each with their own access opening to an organically shaped system of ‘caves’ to the rear of the classroom. The soft interiors of theses spaces are for touching, for nestling up against, for retreating into for exploration or concentration, on one’s own or in a group. The upper floor is by contrast light and open, the openings in its bamboo walls offering sweeping views across the sur- roundings, its large interior providing space for movement. The view expands across the treetops and the village pond. Light and shadows from the bamboo strips play across the earth floor and contrast with the colourful materials of the saris on the ceiling. Building construction and techniques The building rests on a 50cm deep brick masonry foundation rendered with a facing cement plaster. Bricks are the most common product of Bangladesh’s building manufacturing industry. Bangladesh has almost no natural reserves of stone and as an alternative the clayey alluvial sand is fired in open circular kilns into bricks. These
are used for building or are broken down for use as an aggregrate for concrete or as ballast chippings. Imported coal is used to fire the kilns. Aside from the foundation, the damp proof course was the other most fundamental addition to local earthen building skills. The damp proof course is a double layer of locally available PE-film. The ground floor is realised as load-bearing walls using a technique similar to cob walling. A straw-earth mixture with a low straw content was manufactured with the help of cows and water buffalo and then heaped on top of the foundation wall to a height of 65cm per layer. Excess material extending beyond the width of the wall is trimmed off using sharp spades after a few days. After a drying period of about a week the next layer of cob can be applied. In the third and fourth layers the door and window lintels and jambs were integrated as well as a ring beam made of thick bamboo canes as a wall plate for the ceiling. The ceiling of the ground floor is a triple layer of bamboo canes with the central layer arranged perpendicular to the layers above and beneath to provide lateral stabilisation and a connection between the supporting beams. A layer of planking made of split bamboo canes was laid on the central layer and filled with the earthen mixture analogue to the technique often used in the ceilings of European timber-frame constructions. The upper storey is a frame construction of four-layer bamboo beams and vertical and diagonal members arranged at right angles to the building. The end of the frames at the short ends of the building and the stair also serve to stiffen the building. These are connected via additional structural members with the upper and lower sides of the main beams and equipped with additional windbracing on the upper surface of the frame. A series of bamboo rafters at half the interval of the frame construction beneath provide support for the corrugated iron roof construction and are covered with timber panelling and adjusted in height to provide sufficient run-off. Finishes and fittings The exterior surface of the earth walls remains visible and the window jambs are rendered with a lime plaster. The framework constructon of the green façade to the rear is made of bamboo canes seated in footings made of old well pipe and with split horizontal timbers as latticework. The interior surfaces are plastered with a clay paster and painted with a lime-based paint. The ‘cave’s are made of a straw-earth daub applied to a supporting structure of bamboo canes and plastered with a red earth plaster. The upper storey façades are clad with window frames covered with bamboo strips and coupling elements hung onto the columns of the frame construction. A fifth layer of cob walling provides a parapet around the upper storey forming a bench run- ning around the perimeter of the building and anchoring the upper storey frame construction and roof against wind from beneath. A textile ceiling is hung beneath the roof is lit from behind in the evening. The cavity behind the textiles ventilates the roof space. WHY IS IT A GREAT SUMMARY OF SUSTAINABLE ARCHITECTURE?
The School as a representative public building in a modern architectural style using the old theories and traditional technologies. This school fulfilled its intended role, it has several thousands of visitors from the surrounding villages and towns. They really needed this function. This project has more social points, because they built the school in community, used only environmental technologies, which results in highly specialized knowledge, but the locals can understand it easily and this method does not require serious technical equipments, and reasonable proposals under the circumstances. During the construction, the locals got to know the possibility of building modern things and from the local materials and by traditional technologies. That knowledge can also be used in personal construction works, because neither the construction nor the operation use only natural properties and materials. Training through `learning by doing' give an opportunity to the local craftsmen to improve their general housing conditions. Along these things, this building gives a visual education for the locals as well, they can build in architectural term, high-quality buildings from cheap materials. We can say it is environmentally-friendly, it is made of natural and non-toxic materials, it has mud walls and bamboo roofs. It has a close relationship with its environment, it does not use expensive engineering equipments. The local materials offer benefits from an economic point of view as well, they strengthen the local economy and create jobs and created a place to transfer the knowledge. SOCIAL
ECONOMY
CII Sohrabji Godrej Green Business Centre
Project Details Location- Hyderabad, India
Name- CII Sohrabji Godrej Green Business Centre Developer- The project is a unique and successful model of public-private partnership between the
Government of
Andhra Pradesh, Pirojsha Godrej Foundation, and the Confederation of Indian Industry (CII), with the technical support of USAID Architect- Karan Grover and Associates, India Size- 4.5 acres (total site area) 1,858 m2 (total built up area) 1,115 m2 (total air-conditioned area) Type- Office building Building details- Office building Seminar hall Green Technology Centre displaying the latest and emerging green building materials and technologies in India Large numbers of visitors are escorted on green building tour. Ratings- Awarded the LEED Platinum Rating for New Construction (NC) v 2.0 by the U.S. Green Building Council (USGBC) in November 2003
Introduction CII - Sohrabji Godrej Green Business Centre (CII Godrej GBC), cozily nestled close to Shilparamam, is the first LEED Platinum rated green building in India. The building is a perfect blend of India’s rich architectural splendor and technological innovations, incorporating traditional concepts into modern and contemporary architecture. Extensive energy simulation exercises were undertaken to orient the building in such a way that minimizes the heat ingress while allowing natural daylight to penetrate abundantly. The building incorporates several world-class energy and environmentfriendly features, including solar PV systems, indoor air quality monitoring, a high efficiency HVAC system, a passive cooling system using wind towers, high performance glass, aesthetic roof gardens, rain water harvesting, root zone treatment system, etc. The extensive landscape is also home to varieties of trees, most of which are native and adaptive to local climatic conditions. The green building boasts a 50% saving in overall energy consumption, 35 % reduction in potable water consumption and usage of 80% of recycled / recyclable material. Most importantly, the building has enabled the widespread green building movement in India.
Green features and sustainable technologies Energy Efficiency State-of-the- art Building Management Systems (BMS) were installed for realtime monitoring of energy consumption. The use of aerated concrete blocks for facades reduces the load on airconditioning by 15-20%.Double-glazed units with argon gas filling between the glass panes enhance the thermal properties. Zero Water Discharge Building All of the wastewater, including grey and black water, generated in the building is treated biologically through a process called the Root Zone Treatment System. The outlet-treated water meets the Central Pollution Control Board (CPCB) norms. The treated water is used for landscaping. Minimum Disturbance to the Site The building design was conceived to have minimum disturbance to the surrounding ecological environment. The disturbance to the site was limited within 40 feet from the building footprint during the construction phase. This has preserved the majority of the existing flora and fauna and natural microbiological organism around the building. Extensive erosion and sedimentation control measures to prevent topsoil erosion have als been taken at the site during construction. Materials and Resources 80% of the materials used in the building are sourced within 500 miles from the project site. Most of the construction material also uses post-consumer and industrial waste as a raw material during the manufacturing process.
Fly-ash based bricks, glass, aluminum, and ceramic tiles, which contain consumer and industrial waste, are used in constructing the building to encourage the usage of recycled content. Office furniture is made of bagasse based composite wood. More than 50% of the construction waste is recycled within the building or sent to other sites and diverted from landfills. Renewable Energy 20% of the building energy requirements are catered to by solar photovoltaics. The solar PV has an installed capacity of 23.5 kW. Indoor Air Quality Indoor air quality is continuously monitored and a minimum fresh air is pumped into the conditioned spaces at all times. Fresh air is also drawn into the building through wind towers. The use of low volatile organic compound (VOC) paints and coatings, adhesives, sealants, and carpets also helps to improve indoor air quality.
Other Notable Green Features
Fenestration maximized on the north orientation
Rain water harvesting
Water-less urinals in men’s restroom
Water-efficient fixtures: ultra low and low-flow flush fixtures
Water-cooled scroll chiller
HFC-based refrigerant in chillers
Secondary chilled water pumps installed with variable frequency drives (VFDs)
Energy-efficient lighting systems through compact fluorescent light bulbs (CFLs)
Roof garden covering 60% of building area
Large vegetative open spaces
Swales for storm water collection
Maximum day lighting
Operable windows and lighting controls for better day lighting and views
Electric vehicle for staff use
Shaded car park
Cost and Benefits This was the first green building in the country. Hence, the incremental cost was 18% higher. However, green buildings coming up now are being delivered at an incremental cost of 6-8%. The initial incremental cost gets paid back in 3 to 4 years. Benefits achieved so far:
Over 120,000 kWh of energy savings per year as compared to an ASHRAE 90.1 base case
Potable water savings to tune of 20-30% vis-à-vis conventional building
Excellent indoor air quality
100% day lighting (Artificial lights are switched on just before dusk)
Higher productivity of occupants
SUSTAINABILITY IN INTERIOR DESIGN Environmental sustainability is becoming a major concern within the interior design field due to the extensive resources needed for interior use. Sustainable interior design practices are actions that lessen environmental impact due to site selection, water use, energy use, and material selection. With these considerations, interior designers are able to provide a physiologically and psychologically healthy indoor environment. Overall, environmentally sustainable interior design minimizes negative effects and maximizes positive effects on environmental systems over the life cycle of a building, by blending solutions of the past with new technology of today. Interior design is a profession that serves for the human habitation in the environment. In the context of human needs, there are many different dimensions and levels of satisfaction. The interior space can satisfy the need of security, or it can lead to a satisfaction level from security to self-esteem. Recent global debates focus on to a basic need that is to survive. Need of sustainable environment is an obligation rather than a will, in order to survive. This study aims to discuss the interior design elements in the dimension of sustainability. The practice of interior design is also considered in the context of sustainability. Sustainability in Interior Design Elements As a profession, designing interior environments can be defined as “determining the relationship of people to spaces based on psychological and psychical parameters, to improve the quality of life”. In the core of sustainability, these physical parameters gain importance in the means of long term use. Sustainable interior design is defined as “interior design in which all systems and materials are designed with an emphasis on integration into a whole for the purpose of minimizing negative impacts on the environment and occupants and maximizing positive impacts on environmental, economic and social systems over the life cycle of a building”. Kang and Guerin defined the sustainable interior design practice in three dimensions as: global sustainable interior design, indoor environmental quality, and interior materials. The indoor environmental quality, that is also an assessment category in the LEED, is the most important implication in considering the sustainability of interior environments. Improving indoor air quality which is mainly the activity of reducing indoor pollutants, improves the thermal comfort and quality of interior lighting. Moreover, using materials those can have the possibility of recycling is another criteria in obtaining sustainability. In considering these aspects, most essential interior design elements are materials, furnishing, and lighting.
Interior Design Element: Materials
In material selection, the most important criteria is to select the material according to the features of function. Each of every function has specific needs. As an example, materials used in the hospital interior and the shopping mall should be different due to the sterilization aspect. Especially, the selection should aim to long term use. It is very important to use a material in its maximum potential in order to reduce waste of resources. As, in the process of producing materials, the energy is used. This is called as the embodied energy. Each material has different amount of embodied energy. For example, concrete, steel and the plastics are higher in embodied energy amount in the construction materials. Especially, natural materials such as stone and timber gradually have less embodied energy. Another important criterion in material selection is the recycling potential of the materials. There are many studies in the field of waste management which aim to innovate new construction materials. A Cierra Recycling can be an example to one of these. Basically, they collect and separate the waste, and then they transform it and remanufacture these waste products. Moreover, the level of emission of toxic gases both used in production process and during the using period of the materials is an essential criterion in achieving sustainability. Especially, most traditional techniques in construction and materials are widely sustainable. As an example, traditional materials like mud brick and adobe are highly sustainable in the means of level of toxic gases emission. They are natural materials. All these criteria are important in maintaining indoor air quality. Finally, materials, as interior design elements, should meet the requirement of sustainability in the potential of long term use, recycling, and less emission of toxic gases. Interior Design Element: Furnishing Furniture is the major element in interior design. They have a wide range of materials and color. In the context of sustainability, materials used in the production process and the long term use of the furniture are the major criterions. Wood products are widely used materials in the furniture production. They can be recycled actually. However, some synthetic materials used in the wood production process cannot be recycled. Moreover, the wastes occurred in the production process damages the nature. These waste products contain same toxic polymer based synthetic materials. The rate of the waste to the product is about 30% of the total amount of the product. Rather than the production process, the old furniture also cannot be recycled. These wastes have a big role in increasing the amount of global waste. Achieving sustainable furniture, recycling is one of the important criterion. Recently, some of the furniture companies started producing furniture totally from waste.
Furniture produced from metal barrel
wardrobe produced from waste of barrel
Furniture produced from waste sometimes face with the problem of aesthetics. These type of furniture are sometimes considered as unaesthetic. This is the major problem in selecting these furniture. The aesthetic quality of the furniture should be considered. Then, it will both serve for the purpose of sustainability and widely used. In recent years, there are also innovative examples in the furniture production. In Cambridge University, design and engineering departments developed a joint project. They created a technology in order to generate electric from the plantation. They conduct this system in a table. There is a light fixture on the table and there is a plantation in the table. The lighting fixture gets it energy from the plantation in the table. It is an example to innovative sustainable design. It should be considered as an example for the essence of interdisciplinary study in achieving sustainable environments.
Table and lighting unit removable energy
Interior Design Element: Lighting Lighting considerations in interior design is mostly concentrate on the reduction of using electric energy. Energy used in interior environment of the building is approximately captures the 40-50% of the total energy
used in buildings. It occupies a large amount of energy consumption. Therefore, designers should use the maximum possible natural night in interior environments. Environmental lighting is also one of the physical parameters affecting the indoor environmental quality. Day light is the main source in natural lighting. It can be explain as “the practice of bringing light into a building interior and distributing it in a way that provides more desirable and better quality illumination than artificial light sources”. In this context, the building should be located according to gain maximum day light. Also, the size and the depth of the room should be appropriate to use maximum day light. Recently, there developed new technological tools to carry day light to the deep interior space of the building even to the basements. The main principal in these tools are to collect the sun light and reflect the light through the reflective tubes. Laser cut panels, light piping systems, horizontal and vertical light pipes are examples of these systems
Vertical light pipes
Moreover, there are many research studies carried out about the benefits of day light in life quality in interior environments. Especially, these studies demonstrate that day light affect the productivity level in office environments. Yaldiz and Magdi considered the day light in the context of sustainability in three categories as: 1. Resource sustainability (using day light to affect the energy of the building performance). 2. Economical sustainability (in the dimension of financial benefit). 3. Human sustainability (in the dimension of human physical and psychological health) . The lighting is a major interior design element. It is obvious that it has a essential role in developing sustainable interior environments. It is both important in energy reduction and for the sake of human health. Interior Design Element: Indoor Air Quality (IAQ)
The Environmental Protection Agency (EPA) and National Institute of Occupational Safety and Health (NIOSH) defined good Indoor Air Quality (IAQ) as the introduction and distribution of adequate ventilation air, control of airborne contaminants, and maintenance of acceptable temperature and relative humidity. Indoor air pollution is introduced into a space through materials, finishes, furnishings, and equipment, chemicals used inside a building, and through human activities and biological processes. Interior Designers help control Indoor Air Quality (IAQ) by taking precautions with construction or renovation procedures (Kang & Guerin, 2009). For Examples: raise the base of partitions one to two inches from the floor to allow airflow around acoustic partitions in an office space, place exhaust fans in enclosed spaces or where pollutants are contained (e.g. a kitchen, smoking lounge, or bathroom), and consider using plants in interior spaces when fitting. Additionally, delaying occupancy so new materials can release harmful chemicals prior to occupancy prevents occupants from any unnecessary volatile organic compound (VOC) exposure. Designers are responsible for addressing a client's needs, including the exposure to dangerous chemicals found in the air. Human health, safety, wellbeing, and productivity can be affected by the choices designers make. Improved ventilation helps reduce illness and increase productivity. International case studies showed a 9-20% drop in respiratory illness and up to an 11% increase in productivity.
Sustainable materials in interior design 1. Carpet and Flooring 2. Recycled Glass, Paper and Plastic 3. Tile and Decorative Fixtures 4. Reused and Salvaged Materials
1. Eco-Friendly Carpet Choices
Wool Carpet
Carpet Tile
Wool Carpet: A rapidly renewable, natural material
100% natural fiber from 100% renewable resource.
Several broadloom wool carpets have an all natural backing.
Less wasteful, more efficient manufacturing than nylon carpet.
Naturally soil resistant; less chemical cleaning.
Great for indoor air quality; no harmful VOCs, hypo allergenic.
Resists compression and fading (superior long-term appearance and durability)
Carpet Tile: Reduce waste, reuse tiles, recycle at end of life
More versatile than broadloom carpet.
Replace one tile instead of an entire room – less waste!
Contains a percentage of recycled material.
Takes up less shipping space, and less space for attic stock.
Repurpose or return and recycle at the end of its useful life.
Linoleum, Cork and Bamboo: Rapidly renewable, natural materials
Linoleum
All natural, renewable materials
Durable and low-maintenance material
Virtually limitless creative design opportunities, countertops included!
Creating energy at the end of its useful life.
Cork Flooring
Rapidly renewable material with superior durability characteristics
Can be stained to match virtually any color
Natural buoyancy allows for comfort underfoot
Absorbs sound in noisy interiors.
Bamboo
Rapidly renewable material
Incredibly durable – great life cycle!
Beautiful design possibilities
Two basic types of bamboo flooring: Strand and Solid
Available from sustainably managed sources
2. Recycled glass, paper, and plastic Recycled Glass
85% glass
100% of the glass is recycled in the USA
Manufactured in the USA
Diverts waste from the landfill
Cradle to Cradle Certified
No off-gassing
Recycled Paper
Up to 100% Post – Consumer recycled paper
Diverts waste from the landfill
Paper Stone Certified contains 100%
recycled paper and is certified by the FSC.
Paper Stone is available through Lowe’s
Recycled Plastic: 3-Form 100%
100% recycled plastic
Diverts waste from the landfill
Up-cycled into higher quality
Reduces the demand for virgin materials
Entirely Recyclable
Reclaim
Old 3-Form, new design
Save your cash!
Reduce energy use
3. Eco-Friendly Tiles and Decorative Finishes
Recycled Glass
Recycled Aluminum
Recycled Glass Tiles
Up-cycled into a decorative finish
Diverting waste from landfills
Creating a market for recycled glass
Beautiful and versatile
Recycled Aluminum Tiles
Up-cycled into a decorative finish
Relieves overload at recycling facilities
Creating a market for recycled aluminum
Great for countertops and wall finishes
Recycled Aluminum Fixtures
Up to 100% post consumer recycled content
Metal scraps recreated into modern fixtures
Reduces the extraction of virgin materials
3. Salvage and Reuse
Salvaged Furniture, Finishes, and Hardware
Make something old into something new
Reduce energy use and waste
Add quality and character
