dsr 2014=2015

GOVERNMENT OF MAHARASHTRA

PUBLIC WORKS DEPARTMENT

PUBLIC WORKS REGION, PUNE (Pune, Kolhapur, Sangli, Satara & Solapur Districts)

SCHEDULE OF RATES 2014-2015 EFFECTIVE 01 JULY 2014 (COMPLYING USE OF MODERN MACHINERY AND SCADA AS PER GOVERNMENT CIRCULAR DATED 26-05-2014)

मनोगत सा.बाां.विभागाची 150 िर्ााची परां परा, तसेच काळानरू ु प झालेले विविध

क्षेत्रातील बदल / सध ु ारणा, सांगणकीय तांत्रज्ञानाचे ननयमित िापर ि त्या

अनर् ु ांगीक होणारे फायदे इत्यादद बाबीांचा सखोल विचार करून शासनाने दद.265-2014 रोजी,

विविध सध ु ारीत िानके, अत्याधनु नक यांत्रसािग्र ु ी , आधनु नक

कायापद्धती ि तांत्रज्ञान (SCADA) याचा िापर करण्याच्या सच ु ना पररपत्रकान्िये ननगामित केलेल्या आहे त.

शासनाच्या िरील पररपत्रकान्िये ननधााररत केलेले धोरण क्षेत्रत्रय स्तरािर

राबिण्यासाठी, सािाजननक बाांधकाि विभागाच्या कायाप्रणालीत बाांधकाि क्षेत्राशी

ननगडीत दरसच ू ी हा िख् ु य पाया आहे . अश्याप्रकारे शासनच्या धोरणाशी सस ु ांगत, सािाजननक बाांधकाि प्रादे मशक विभाग,पण ु े याांच्या कायाक्षेत्रातील बाांधकािाकररता सन 2014-15 ची दरसच ू ी प्रमसध्द करणेत येत आहे .

या दरसच ु ीिळ ु े सािाजननक बाांधकाि विभागाच्या बाांधकािाांचा

दजाा ि

गुणित्ता यािध्ये ननश्श्चतपणे अिल ु ाग्र बदल होईल अशी िला खात्री आहे . सा.बाां.प्रादे मशक विभाग, पण ु े "दरसच ू ी 2014-15" ही पयाािरणपरु क अशा

सांगणकीय प्रणालीद्िारे "e-book" स्िरूपात

सा.बाां.विभागाच्या सांकेतस्थळािर

प्रमसद्ध करताांना िला विशेर् आनांद होत आहे . ही दरसच ु ी तयार करणेकािी पण ु े प्रादे मशक विभागातील अमभयांते / किाचारी

तसेच प्रत्यक्ष / अप्रत्यक्ष सहभागी सहकाऱयाांचे

िी िन:पि ा अमभनांदन करतो. ू क

हाददाक शभ ु ेच्छासह ! ! ! . . . ( एकनाथ पाां. उगिले ) मुख्य अगियां ता, सार्वजगनक बाांधकाम प्रादे गिक गर्िाि, पुणे 411001

SCHEDULE OF RATES 2014-15 INDEX

Table of Contents GENERAL NOTES ........................................................................................................................5 2: BUILDING WORK ................................................................................................................. 11 Bd-A : Excavation ...................................................................................................................... 11 Bd-B : Pile Foundation ...............................................................................................................17 Bd-C : Structural Steel Work ...................................................................................................... 22 Bd-E : Plain Cement Concrete .................................................................................................. 24 Bd-F : Reinforcement Cement concrete ..................................................................................... 28 Bd-G : Brick Work .................................................................................................................... 77 Bd-H : Stone Masonry ................................................................................................................80 Bd-I : Cement Concrete Block Masonry ....................................................................................83 Bd-J : Water Proofing ................................................................................................................ 84 Bd-K : Expansion Joint.............................................................................................................. 88 Bd-L : Plastering and Pointing.................................................................................................... 90 Bd-M : Paving,Flooring and Dado.............................................................................................. 96 Bd-N : Wood finish .................................................................................................................. 110 Bd-O : Oil Painting ................................................................................................................... 112 Bd-P : Colour,white washing,distempering .............................................................................. 116 Bd-Q : Wood work ................................................................................................................... 119 Bd-R : Roofing and ceiling ....................................................................................................... 122 Bd-T : Doors and windows ....................................................................................................... 131 Bd-U : Iron Work .................................................................................................................... 154 Bd-V : Water supply and sanitory fittings ............................................................................... 155 Bd-W : Miscellaneous ............................................................................................................. 187 3: CD

: cross dranage works ..................................................................................................... 201

4: MORT & H Bituminous Construction .................................................................................... 207 5A: BR

: Bridge Works .......................................................................................................... 247

5B: MORTH

: Bridge Works .................................................................................................. 313

6: SURVEY WORKS ................................................................................................................. 324 7: Material Testing...................................................................................................................... 368 8: FIRE FIGHTING .................................................................................................................... 378 9: MATERIAL MASTER ........................................................................................................... 389 10: LABOUR MASTER............................................................................................................. 444

GENERAL NOTES 1

Schedule of Rates prepared for the year 2014-15 is Operative from 1st July 2014 and applicable for Pune , Solapur , Kolhapur ,Sangli, and Satara District.

2

For the rates in Corporation area, Notified Tribal area, Hilly inaccessible areas, & Central Jail premises, Mental Hospital premises an increase of percentages over the normal schedule of rates (Basic completed item Rates) prescribed for the year 2014-15 are as follows. 1 Corporation Areas 5% 2 Sugarcane factory area (within 10 Km. radius ) 5% 3 Notified Tribal Areas 10% 4 Notified Hilly / Inaccessible areas 10% 5 Inside Premises of 15% Central Jail, Mental Hospital, Raj Bhavan , Yerawada Prison , Yerawada Printing press..

The Superintending Engineers should Specify the s u g a r factory areas under their circles after ascertaining working condition of the Sugar factory. The Hilly / inaccessible areas in western ghat region for Public Works Region, Pune are identified as below: Sr.No.

District

Hilly/ Inaccessible areas

1

Pune

2

Solapur

Government Resolution, Planning Department No.DVK/1089/P-66/Y-19

3

Sangli

Dated 23-11-1990 & 13-06-2003

4

Satara

5

Kolhapur

The increase in rates as above should be applicable only one at a time e.g. if Central Jail is situated in Corporation area an increase of only 15% for the jail is to be considered and not 20% (15% + 5%). Issue rates of Schedule ‘A’ materials for above notified area shall be increased by respective percentage. The above percentage should be applied on the cost of items after deducting the cost of Specified materials, if issued on Schedule 'A'. 3.

Schedule of rates is based on the following basic rates of materials: Sr.No.

Material

Basic rate for 2014-15

A

Cement

Rs. 6,000 / M.T.

B

Mild Steel

Rs.45,700 / M.T.

C

Tor Steel(H.Y.S.D)

Rs.47,300 / M.T.

D

Structural Steel

Rs.48,600 / M.T.

E

TMT-FE-500

Rs.47,900 / M.T.

F

High Tensile Steel

Rs.75,200 / M.T.

H

Bitumen VG-30 (Packed)

Rs.58,685 / M.T. Ex. Refinery Mumbai

I

Bitumen VG-10 (Packed)


J

Bitumen VG-40 (Bulk)


K



L



M

Bitumen Emulsion

Rs.51092 / M.T. Ex. Refinery Mumbai

4

TAXES AND GOVT. CIRCULARS

4.1

VAT, LBT & SALES

TAX

f o r m a t e r i a l s are

not

considered

in

the

rate

abstract as market rate includes VAT, LBT. AND SALES TAX. 4.2

Turn over tax is not considered in the Rate Abstract.

4.3

i) As per Govt. circular No. DSR-1090 /CR-6453/PLN-3 dt. 14-7-1993, 1% for labour amenity is considered in Rate Abstract. ii) As per G.R. of Industries and power Department No.BCA-2009/CR-108/Labour 7A dated 17-06-2010, 1% cess for labour welfare is not considered in the Rate Abstract. The same should be a d d e d in the rate analysis w h i l e f r a m i n g the e s t i m a t e . iii) As per revised circular issued by Dy. Directorate of Insurance Maharashtra State v i d e letter No. प्रगर्गन-2310/सा.बाां.गर्./गर्मा र्सुली/अगि-3 गदनाांक 08-09-2010 below mentioned percentages for insurance of contract work shall be added in the Recapitulation Sheet while Framing the estimate. The actual amount incurred by contractor for insurance of work shall be reimbursed on production of documentary evidence and after checking/ certification from Divisional Accounts Officer. a) Work value upto 25.00 lakhs - 0.50% b) Work value above to 25.00 lakhs- 1.00%

4.4

As per Government of Maharashtra, Revenue and Forest Departments Notification No.Gaunkhanij-10/1009/PK-309/Kh(3) dated 11th Feb. 2010, Royalty charges of Rs.200/Brass, i.e. Rs.70.67/Cum, are included in the respective items of supply of natural minerals i.e.. Rubble, Metal, Sand, Murum etc. Contractor will have to produce documentary evidence in the form of “Original Royalty Paid Receipt” issued by the competent Revenue Authority for specified Tendered Work to the concerned Executive Engineer, as regards payments made by him to the Revenue Department towards royalty charges. If such documentary evidence is not produced by the contractor, component of Royalty charges will be recovered from bills of concerned contractor. The same amount should be paid to Revenue Department. However in case the rates are revised by Revenue and Forest Department time to time, the difference may be considered while preparing Estimate.

4.5

As Royalty charges for bricks and crushed metal (as these are factory product) are already paid by the quarry owner, same should not be considered in the rate analysis.

4.6

The basic rates of materials are as per the Rates charged by the main producers / suppliers at their respective points of supply, as on the date of implementation of D.S.R; which includes all taxes such as excise, CST, BST , LBT, Terminal TAX, VAT, Educational Tax etc. except for Bitumen and Cement. For cement 4% Sales Tax is considered. The rates of bulk/packed bitumen, bitumen emulsion adopted for the items of st bituminous works are based on the rates prevailing on 1 of May 2014 at exRefinery Mumbai. The rates are inclusive of excise duty of 16% with additional education cess of 3 % on excise duty and VAT 12.50%. Subsequent increase/ decrease, if any, in these rates shall be accounted for in the rate analysis of the items while framing the estimate.

5

Leads and lifts

5.1

Rates for transportation of material by Truck from different leads have been worked out as per table given by National Building Organization. The cost per trip shown in statement ‘C’, also includes charges of running empty vehicle for return trip. For calculation of transportation charges rates tabulated in material master for following items are considered in the formula. a) Mazdoor

b) Diesel of

pay

c) Mobile Oil load

factor

a

5.2

For calculation considered.

5.3

The rates worked out in the Rate Abstract includes initial lead of 5 Km. for all completed items, but excluding M.O.R.T. & H. items. For supply items and providing Earth work in embankment of road materials lead is not considered in the Rate Abstract. Actual lead charges are to be added for these supply items while framing the estimate.

5.4

For working out Rates of items for additional leads more than 5 Kms. the Rate analysis should be prepared for actual leads by deducting initial lead charges of 5 Kms for all completed items. For M.O.R.T. & H., items total lead charges shall have to be considered in the Rate analysis.

5.5

For leads

less than 1.00 Km. the rates

truck

d) Truck of

7.5

M.T.

capacity

is

worked out for bullock cart, head

loads, whichever is economical, should be adopted as per statement C-2. 5.6

Lead charges for various materials are given in statement C-1 and these are inclusive of loading and unloading charges. Hence loading and unloading charges should not be added separately. a) Rate of transportation of bulk bitumen from Ex-refinery is Rs. 5.20 per M.T./ km. (for one way journey) Rate of heating and unloading bulk bitumen is Rs. 120.00/ M.T.

5.7

The Basic rates for all quarrying materials such as Rubble, boulders, aggregates, sand, murum, selected earth etc. are taken as rates at quarry

with lead of 50 mtr. (Head lead) 5.8

load lead which is not to be deducted from

For items of buildings having ground plus upper floors rate shall be increased as follows for the floor lift. Sr.No.

Floor

Percentage increase

i)

Ground floor

Nil

ii)

First floor

1.00%

iii)

Second floor

1.50%

iv)

Third floor

2.00%

v)

Fourth floor

3.50%

vi)

Fifth floor

4.00%

vii)

Sixth floor

5.00%

viii)

Seventh & floors above

7.00%

The maximum percentage for lift charges shall not be more than 7% .

Ground floor is the floor having height 3.80 m above average ground level. The floor to floor height of 3.80 mtrs. is considered for the purpose of lift charges. For floor to floor height more than 3.80 mtrs. the percentage increase for the upper floor shall apply. The increase in rates as above should be on ground floor basic rates only. No cumulative increase shall be done. Items to be carried out above terrace such as water proofing treatment on terrace, water storage tank, parapet wall with coping, Stair-case, lift room with slabs and water proofing treatment, plastering, painting etc. required for the completion of building are assumed to be the items of its lower floor. 5.9

Additional lift for various, bridge items shall be as per list given below. Rate shall be increased by percentage given below. Lift is to be measured with respect to common datum level which will be specified in tender document/estimate. a)For raft foundation, the datum level shall be raft top. b) For Piers, Abutment, Returns, wing walls, pier cap, slab, Box Returns, average bed level shall be the datum i) Additional Lift- up to 4.00 m. above datum level. - Nil. ii) For every additional 2m.height or depth beyond 4.00 m from Datum - 3.50%

6

General Guidelines

6.1

The contents of D.S.R. Annexure are as follows :Statement A-1 - Material Master. (Basic rates of materials) Statement A-2 - Labour Master Statement A-3 - Machinery Master.

6.2

References of P.W.D. standard specification / M.O.R.T.& H. specification are mentioned below the description of the items.

6.3

6.5

The D S R of Environmental Engineering Organization (ENE) / M.J.P. is to be adopted for water supply and sanitary works, which are not included in this DSR. For cost towards procurement and temporary storage of water for construction purpose necessary provisions are made in Rate abstract. Machinery hire charges rates are as per market rates and rates of Irrigation Department.

6.6

The rates for items pertaining to Parks & Gardens shall be taken from the DSR of, Parks &

6.4

Gardens. 6.7

The dewatering rates mentioned in bridge sections includes post monsoon flow of River/ Nallas and general seepage of water only, and does not include provision of cofferdam, caging etc. In Specific conditions, if cofferdam, , caging etc. are felt essential for dewatering then separate R.A. for that particular be prepared and got approved from competent Authority.

site may

6.8

For items of excavation, foundation concrete and masonry etc. for C.D. works, rates shall be adopted from corresponding items under respective building sections.

6.9

For scaffolding work required to be erected for carrying out repairing work on external faces of building at various heights (viz. repairs to chajja, external plastering, painting etc.). The rate of respective item shall be increased by1% provided the work is carried out by erecting scaffolding. For specific cases rate analysis shall be got approved from concerned Superintending Engineer

6.10

For quantity of concrete more than 50 Cu.Mt. mix design from approved laboratory is necessary.

6.11

For excavation purpose, manual & mechanical means are proposed, when the quantity

of excavation is more

than

100

Cu.Mt.

Excavation by

mechanical

means shall invariably be considered. In case the quantity is more than 100 Cu.Mt. and excavation by manual means is to be proposed, Superintending Engineers prior approval will be necessary. 6.12

All concrete items considered in D.S.R. are inclusive of normal concrete curing system. For building works costing more than Rs.125 lakhs, separate item for intelligent concrete curing system shall be added in estimate.

6.13

6.14

If materials are to be supplied by Department under Schedule “A” of contract, the rate at which the materials will be charged to the Agency shall be based at D.S.R. Rate or prevailing stock issue rate, whichever is more. The schedule A rates should not be less than those mentioned in material master. No Concrete Mix from R.M.C. Plants shall be used for concrete works without prior permission of Superintending Engineer.

6.15

7

Rates of the items using modern machineries with features mentioned below are worked out including cost of machineries and features therein . For any machineries and features mentioned below separate cost shall not be added in rate analysis .Salient features of the modern machineries are as specified under Annexure-Modern Machinery. (attached in DSR) Testing Of Material

7.1

Laboratory testing charges are not considered in the Rate Abstract. Wherever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, Pune for the current year and shall form part of tender.

7.2

The job mix design for items like M-20 & above grade of concrete mix design, GSB, asphaltic concrete, bituminous macadam etc. shall be obtained from the V.Q.C.C. laboratory.

7.3

For Specific tests like span load tests, plate / pile load test etc. which are not included in the rate analysis of item, the payment /estimates for these tests will be prepared on the basis of rates approved by M.E.R.I.

2: BUILDING WORK Bd-A : Excavation 1i a / 1 BDA 1..

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Manual Means Spec. No.: Bd.A.1 Page No. 259

Cubic Meter

138.00

138.00

1i b / 1 BDA 1

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec. No.: Bd.A.1 Page No. 259

Cubic Meter

140.00

45.00

1ii a / 1 BDA 1.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Manual Means Spec. No.: Bd.A.1 Page No. 259

Cubic Meter

149.00

149.00

1ii b / 1 BDA 1

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means Spec. No.: Bd.A.1 Page No. 259

Cubic Meter

117.00

66.00

2i a / 1 BDA 2

Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Manual Means Spec. No.: Bd.A.2 Page No. 259

Cubic Meter

149.00

149.00

2i b / 1 BDA 2

Excavation for foundation in hard murum including removing the excavated materials upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec. No.: Bd.A.2 Page No. 259

Cubic Meter

118.00

53.00

2ii a / 1 BDA 2

Excavation for foundation in Hard murum Cubic including removing the excavated Meter material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Manual Means Spec. No.: Bd.A.2 Page No. 259

169.00

169.00

2ii b / 1 BDA 2

Excavation for foundation in Hard murum Cubic including removing the excavated Meter material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means Spec. No.: Bd.A.2 Page No. 259

131.00

72.00

3i a / 1 BDA 3

Excavation for foundation in Hard murum Cubic and boulders in-cluding removing the Meter excavated materials up to a distance 50

178.00

178.00

metres, beyond the building area and stacking and spreading as directed dewatering preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Manual Means Spec. No.: Bd.A.3 Page No. 259 3i b / 1 BDA 3

Excavation for foundation in Hard murum Cubic and boulders in-cluding removing the Meter excavated materials up to a distance 50 metres, beyond the building area and stacking and spreading as directed dewatering preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec. No.: Bd.A.3 Page No. 259

131.00

66.00

3ii a / 1 BDA 3

Excavation for foundation in Hard murum Cubic and boulders in-cluding removing the Meter excavated materials upto a distance of 50 metres, beyond the building area and stacking and spreading as directed dewatering preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Manual Means Spec. No.: Bd.A.3 Page No. 259

183.00

183.00

3ii b / 1 BDA 3

Excavation for foundation in Hard murum Cubic and boulders including removing the Meter excavated materials upto a distance of 50 metres, beyond the building area and stacking and spreading as directed dewatering preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means Spec. No.: Bd.A.3 Page No. 259

143.00

77.00

4i a / 1 BDA 4

Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated materials upto a distance of 50 metres beyond the building area and stacking as directed including dewatering preparing the bed for the foundation and necessary back filling

406.00

406.00

Cubic Meter

with available earth murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Manual Means Spec. No.: Bd.A.4 Page No. 259 4i b / 1 BDA 4

Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated mate-rials upto a distance of 50 metres beyond the building area and stacking as directed including dewatering preparing the bed for the foundation and necessary back filling with available earth murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec. No.: Bd.A.4 Page No. 259

Cubic Meter

280.00

218.00

4ii a / 1 BDA 4

Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated materials upto a distance of 50 meters beyond the building area and stacking as directed, including dewatering preparing the bed for the foundation and necessary back filling with available earth murum, ramming watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Manual Means Spec. No.: Bd.A.4 Page No. 259

Cubic Meter

430.00

430.00

4ii b / 1 BDA 4

Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated materials upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering preparing the bed for the foundation and necessary back filling with available earth murum, ramming watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means Spec. No.: Bd.A.4 Page No. 259

Cubic Meter

323.00

223.00

5a / 1 BDA 5

Excavation for foundation in Hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated materials and stacking it in measurable

Cubic Meter

654.00

456.00

heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth murum watering ramming, complete. (Lift upto 1.5m) Spec. No.: Bd.A.5 Page No. 259 5b / 1 BDA 5

Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated materials and stacking it in measurable heaps within a distance of 50 metres from the building area and including dewatering and back filling with available earth murum watering, ramming completed. (Lift from 1.5m To 3.0 m) Spec. No.: Bd.1.5 Page No. 259

Cubic Meter

725.00

472.00

6/1 BDA 5 B1

Excavation for foundation in Hard-rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated materials and stacking it in measurable heaps within a distance of 50 metres. From the build-ing area including dewatering and back filling with available earth soil murum watering, ramming etc. completed. (Lift upto 1.5m) Spec. No.: Bd.A.5 Page No. 259

Cubic Meter

785.00

521.00

7/1 BDA 6

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated materials upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum ramming, watering, complete. (Lift upto 1.5 m). Spec. No.: Bd.A.6 Page No. 260

Cubic Meter

899.00

795.00

8/1 BDA 7

Excavation for foundation in laterite rock Cubic (soft or hard,) including trimming and Meter levelling the bed for the foundation, removing the excavated materials up to a distance of 50 metres beyond the building area, stacking as directed dewatering and back filling with available murum, ramming watering complete. (Lift upto 1.5 m.) Spec. No.: Bd.A.7, Page No. 260

545.00

370.00

9/1 BDA 10

Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete. Spec. No.: Bd.A.10 Page No. 262

Cubic Meter

58.00

58.00

10 / 1 BDA 11

Filling in plinth and floors with contractors soil sand or murum in 15 cm to 20cm, layers including watering and compaction complete. Spec. No.: Bd.A.11 Page No. 263

Cubic Meter

505.00

74.00

11 / 1 BDA 12

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soiling 15 cm to 20 cm thick including hand packing and compacting complete. Spec. No.: Bd.A. 12 Page No. 264

Cubic Meter

950.00

142.00

12 / 1 BDA 13

Providing and filling in the foundation with sand of ap-proved quality including watering, compaction complete. Spec. No.: Bd.A.13 Page No. 264

Cubic Meter

1254.00

149.00

13 / 1 BDA

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit ramming, watering complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

1057.00

149.00

Bd-B : Pile Foundation 1/2 Bd-B

Providing M-20 RCC cast insitu single rim bored pile of 225 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing reversible drum type concrete mixer concrete by tremie arrangement compaction of concrete etc. complete. Spec. No.: Bd-F

Running Meter

557.00

74.00

2/2 Bd-B


Running Meter

716.00

74.00

3/2 Bd-B


Running Meter

1017.00

74.00

4/2 Bd-B


Running Meter

1365.00

74.00

5/2 Bd-B

Providing M-20 RCC cast insitu single rim bored pile of 535 mm dia. each of

Running Meter

1912.00

74.00

load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing reversible drum type concrete mixer concrete by tremie arrangement compaction of concrete etc. complete. Spec. No.: Bd-F 6/2 Bd-B


Running Meter

2433.00

74.00

7/2 Bd-B


Running Meter

587.00

74.00

8/2 Bd-B


Running Meter

777.00

74.00

9/2 Bd-B

Providing M-25 RCC cast insitu single rim bored pile of 380 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including

Running Meter

1118.00

74.00

placing reversible drum type concrete mixer concrete by tremie arrangement compaction of concrete etc. complete. Spec. No.: Bd-F 10 / 2 Bd-B


Running Meter

1516.00

74.00

11 / 2 Bd-B

Providing M-20 RCC cast insitu double rim bored pile of 225 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing reversible drum type concrete mixer concrete by tremie arrangement compaction of concrete etc. complete. Spec. No.: Bd-F

Running Meter

583.00

74.00

12 / 2 Bd-B


Running Meter

853.00

74.00

13 / 2 Bd-B


Running Meter

1282.00

74.00

14 / 2 Bd-B


Running Meter

1802.00

74.00

15 / 2 Bd-B


Running Meter

619.00

74.00

16 / 2 Bd-B


Running Meter

929.00

74.00

17 / 2 Bd-B


Running Meter

1421.00

74.00

18 / 2 Bd-B

Providing M-25 RCC cast insitu double rim bored pile of 450 mm dia. each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth

Running Meter

2015.00

74.00

through all strata except rock,excluding provision of reinforcement including placing reversible drum type concrete mixer concrete by tremie arrangement compaction of concrete etc. complete. Spec. No.: Bd-F 19 / 2 Bd-B


Running Meter

2976.00

74.00

20 / 2 Bd-B


Running Meter

3911.00

74.00

Bd-C : Structural Steel Work 1/3 BDC 2

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing including fixing in position without connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. Spec. No.: Bd.C.2 Page No. 275

Metric Tonne

67618.00

5953.00

2/3 BDC 3

Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting complete Spec. No.: Bd.C.3 Page No. 275

Metric Tonne

65724.00

4620.00

3/3 BDC 6

Providing structural steel work in single stanchions com-posed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting complete etc. Spec. No.: Bd.C.6 Page No. 277

Metric Tonne

65943.00

5072.00

4/3 BDC 8

Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting complete, Spec. No.: Bd.C.8 Page No. 278

Metric Tonne

75856.00

13551.00

5/3 BDC

Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures & fittings in two leaves with strong hold fast embedded in c.c. block at top & bottom with locking arrangement including cutting, bending, making holes and with one coat of primer complete. Spec. No.: As directed by Engineer in charge.

Square Meter

3702.00

1492.00

6/3 BDC

Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabrication, hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil painting with 2 coats complete. Spec. No.: As directed by Engineer in charge.

Metric Tonne

86937.00

13966.00

7/3 BDC

Providing, hoisting and fixing in position mild steel Tubular Trusses of required span as per drawing and design including purlins, wind bracing, runners, gusset plates foundations bolts including painting 3 coats of oil paint approved quality and shade, scaffolding etc. complete as per ISI specifications. Spec. No.: B-18 Page No. 78

Metric Tonne

69596.00

13622.00

8/3 BDC

Providing Gas or Electrical welding for Centimeter structural steel section, plates as per detailed drawing. For less than 10 mm thick section. Spec. No.: B.18, Page No 78

6.00

3.00

Bd-E : Plain Cement Concrete 1a / 4 BDE 1

Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer, With natural sand. Spec. No.: Bd. E. 1 Page No. 287

Cubic Meter

3805.00

632.00

1b / 4 BDE 1

Providing and laying in situ, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compacting and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . With crushed sand. Spec. No.: Bd. E. 1 Page No. 287

Cubic Meter

3708.00

632.00

2i a / 4 BDE 2

Providing and casting in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer ... With natural sand. Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38

Cubic Meter

5025.00

670.00

2i b / 4 BDE 2

Providing and casting in situ cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer .. With Cushed sand. Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38

Cubic Meter

5021.00

670.00

2ii a / 4 BDE 2

Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/

Cubic Meter

5396.00

670.00

gneiss metal for steps including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With Natural sand. Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38 2ii b / 4 BDE 2

Providing and casting in situ cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for steps including centering, formwork, compacting, roughening them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer .. With Cushed sand. Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No 38

Cubic Meter

5388.00

670.00

3i a / 4 BDE 4

Providing and casting in situ cement concrete M-15 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water formwork, compacting, roughening, them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With natural sand. Spec. No.: Bd.E.4 Page No. 289 and B7, Page No.38

Cubic Meter

4909.00

670.00

3i b / 4 BDE 4

Providing and casting in situ cement concrete M-15 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water formwork, compacting, roughening, them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With Cushed sand. Spec. No.: Bd.E.4 Page No. 289 and B7, Page No.38

Cubic Meter

4907.00

670.00

3ii a / 4

Providing and casting in situ cement

Cubic

5471.00

670.00

BDE 4

concrete M-20 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water formwork, compacting, roughening, them if special finish is to be provided and curing and finishing if required complete,with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With natural sand. Spec. No.: Bd.E.4 Page No. 289 and B7, Page No.38

Meter

3ii b / 4 BDE 4

Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water formwork, compacting, roughening, them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . . With Cushed sand. Spec. No.: Bd.E.4 Page No. 289 and B7, Page No.38

Cubic Meter

5208.00

670.00

4a / 4 BDE 7

Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for arches including skew backs as per detailed drawing or as directed in superstructure including centering, form work, compacting, finishing with minimum thickness of 1:3 cement plaster to give a smooth and even surface or roughening them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . complete, . With natural sand. Spec. No.: Bd.E.7 Page No 291 and B-7 Page No .38

Cubic Meter

10133.00

670.00

4b / 4 BDE 7

Providing and casting in situ cement concrete M-20 of trap / granite /quartzite/ gneiss metal for arches including skew backs as per detailed drawing or as directed in superstructure including centering, form work, compacting, finishing with minimum thickness of 1:3 cement plaster to give a smooth and

Cubic Meter

10128.00

670.00

even surface or roughening them if special finish is to be provided and curing and finishing if required complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer . complete, With Crushed Sand. Spec. No.: Bd.E.7 Page No 291 and B-7 Page No .38

Bd-F : Reinforcement Cement concrete 1A a i / 5 Providing and laying in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer . With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

4981.00

803.00

1A a ii / 5 Providing and laying in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel ) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. . With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

4945.00

803.00

1A b i / 5 Providing and laying in situ cement BDF 3 concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

5494.00

803.00

1A b ii / 5 Providing and laying in situ cement

Cubic

5482.00

803.00

BDF 3

concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.. With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Meter

1A c i / 5 Providing and laying in situ cement BDF 3 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

5673.00

803.00

1A c ii / 5 Providing and laying in situ cement BDF 3 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.. With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

5666.00

803.00

1A d i / 5 Providing and laying in situ cement BDF 3 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. work in founda-

Cubic Meter

6083.00

803.00

tions like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 1A d ii / 5 Providing and laying in situ cement BDF 3 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.. With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6071.00

803.00

1A e i / 5 Providing and laying in situ cement BDF 3 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer.. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6187.00

803.00

1A e ii / 5 Providing and laying in situ cement BDF 3 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns

Cubic Meter

6175.00

803.00

and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 1B a i / 5 Providing and laying in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, with batch Type mixer with Natural Sand Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

5271.00

819.00

1B a ii / 5 Providing and laying in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).. . With Crushed sand.. . Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

5317.00

819.00

1B b i / 5 Providing and laying in situ cement BDF 3 concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks compaction and curing roughening the surface if special finish is to be provided

Cubic Meter

6460.00

819.00

(Excluding reinforcement and structural steel) complete with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 1B b ii / 5 Providing and laying in situ cement BDF 3 concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6075.00

819.00

1B c i / 5 Providing and laying in situ cement BDF 3 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete.. with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6425.00

819.00

1B c ii / 5 Providing and laying in situ cement BDF 3 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete with fully automatic micro

Cubic Meter

6357.00

819.00

processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 1B d i / 5 Providing and laying in situ cement BDF 3 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete.with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).. With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6772.00

819.00

1B d ii / 5 Providing and laying in situ cement BDF 3 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6664.00

819.00

1B e i / 5 Providing and laying in situ cement BDF 3 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan

Cubic Meter

6876.00

819.00

mixer).... With natural sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38 1B e ii / 5 Providing and laying in situ cement BDF 3 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, cover blocks compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) complete.with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.3 Page No. 298 and B.7, Page No.38

Cubic Meter

6768.00

819.00

2A a i / 5 Providing and casting in situ cement BDF 5 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer. With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

7375.00

1136.00

2A a ii / 5 Providing and casting in situ cement BDF 5 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

7274.00

1136.00

2A b i / 5 Providing and casting in situ cement BDF 5 concrete M-25 of trap / granite /quartzite/

Cubic Meter

7922.00

1136.00

gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B7,Page No 38. 2A b iii / 5 BDF 5

Providing and casting in situ cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B7,Page No 38.

Cubic Meter

7838.00

1136.00

2A c i / 5 Providing and casting in situ cement BDF 5 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8061.00

1136.00

2A c ii / 5 Providing and casting in situ cement BDF 5 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA

Cubic Meter

7976.00

1136.00

enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 2A d i / 5 Providing and casting in situ cement BDF 5 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8569.00

1136.00

2A d ii / 5 Providing and casting in situ cement BDF 5 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8484.00

1136.00

2A e i / 5 Providing and casting in situ cement BDF 5 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8690.00

1136.00

2A e ii / 5 Providing and casting in situ cement BDF 5 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per

Cubic Meter

8605.00

1136.00

detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 2B a i / 5 Providing and casting in situ cement BDF 5 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8244.00

1136.00

2B a ii / 5 Providing and casting in situ cement BDF 5 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8136.00

1136.00

2B b i / 5 Providing and casting in situ cement BDF 5 concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan

Cubic Meter

8798.00

1136.00

mixer).... With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B7,Page No 38. 2B b ii / 5 Providing and casting in situ cement BDF 5 concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B7,Page No 38.

Cubic Meter

8691.00

1136.00

2B c i / 5 Providing and casting in situ cement BDF 5 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

9041.00

1136.00

2B c ii / 5 Providing and casting in situ cement BDF 5 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

8933.00

1136.00

2B d i / 5 Providing and casting in situ cement BDF 5 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as

Cubic Meter

9388.00

1136.00

directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 2B d ii / 5 Providing and casting in situ cement BDF 5 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

9280.00

1136.00

2B e i / 5 Providing and casting in situ cement BDF 5 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38

Cubic Meter

9492.00

1136.00

2B e ii / 5 Providing and casting in situ cement BDF 5 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand.

Cubic Meter

9384.00

1136.00

Spec. No.: Bd.F.5 Page No. 300 and B.7, Page.No. 38 3A a i / 5 Providing & casting in situ cement BDF 6 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

7542.00

1440.00

3A a ii / 5 Providing & casting in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

7441.00

1440.00

3A b i / 5 Providing and casting in situ cement BDF 6 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8083.00

1440.00

3A b ii / 5 Providing and casting in situ cement BDF 3 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including

Cubic Meter

7982.00

1440.00

centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 3A c i / 5 Providing & casting in situ cement BDF 6 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforce-ment).reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8220.00

1440.00

3A c ii / 5 Providing & casting in situ cement BDF 6 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8119.00

1440.00

3A d i / 5 Providing & casting in situ cement BDF 6 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand Spec. No.: Bd.F.6 Page No. 300 and B.7,

Cubic Meter

8787.00

1440.00

Page No.38 3A d ii / 5 Providing & casting in situ cement BDF 6 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding .reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8686.00

1440.00

3A e i / 5 Providing & casting in situ cement BDF 6 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8831.00

1440.00

3A e ii / 5 Providing & casting in situ cement BDF 6 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8749.00

1440.00

3B a i / 5 Providing & casting in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening

Cubic Meter

7242.00

1440.00

the surface if special finish is to be provided & curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 3B a ii / 5 Providing & casting in situ cement BDF 3 concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

7134.00

1440.00

3B b i / 5 Providing and casting in situ cement BDF 6 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

7796.00

1440.00

3B b ii / 5 Providing and casting in situ cement BDF 3 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks compaction and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7,

Cubic Meter

7688.00

1440.00

Page No.38 3B c i / 5 Providing & casting in situ cement BDF 6 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8039.00

1440.00

3B c ii / 5 Providing & casting in situ cement BDF 6 concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

7931.00

1440.00

3B d i / 5 Providing & casting in situ cement BDF 6 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8386.00

1440.00

3B d ii / 5 Providing & casting in situ cement BDF 6 concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening

Cubic Meter

8278.00

1440.00

the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38 3B e i / 5 Providing & casting in situ cement BDF 6 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)....With natural sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8490.00

1440.00

3B e ii / 5 Providing & casting in situ cement BDF 6 concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6 Page No. 300 and B.7, Page No.38

Cubic Meter

8382.00

1440.00

4A a i / 5 Providing and casting in situ cement BDF 8 concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7,

Cubic Meter

7880.00

1577.00

Page No.38 4A a ii / 5 Providing and casting in situ cement BDF 8 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

7794.00

1577.00

4A b i / 5 Providing and casting in situ cement BDF 8 concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

8425.00

1577.00

4A b ii / 5 Providing and casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

8340.00

1577.00

4A c i / 5 Providing and casting in situ cement BDF 8 concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and

Cubic Meter

8562.00

1577.00

landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 4A c ii / 5 Providing and casting in situ cement BDF 8 concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

8524.00

1577.00

4A d i / 5 Providing and casting in situ cement BDF 8 concrete M-35 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

8947.00

1577.00

4A d ii / 5 Providing and casting in situ cement BDF 8 concrete M-35 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided

Cubic Meter

8846.00

1577.00

and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 4A e i / 5 Providing and casting in situ cement BDF 8 concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

9186.00

1577.00

4A e ii / 5 Providing and casting in situ cement BDF 8 concrete M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

9101.00

1577.00

4B a i / 5 Providing and casting in situ cement BDF 8 concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand.

Cubic Meter

9058.00

1602.00

Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 4B a ii / 5 Providing and casting in situ cement BDF 8 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

8950.00

1602.00

4B b i / 5 Providing and casting in situ cement BDF 8 concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

9613.00

1602.00

4B b ii / 5 Providing and casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

9505.00

1602.00

4B c i / 5 Providing and casting in situ cement BDF 8 concrete M-30 of trap/ granite / quartzite/

Cubic Meter

9856.00

1602.00

gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 4B c ii / 5 Providing and casting in situ cement BDF 8 concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

9748.00

1602.00

4B d i / 5 Providing and casting in situ cement BDF 8 concrete M-35 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

10202.00

1602.00

4B d ii / 5 Providing and casting in situ cement BDF 8 concrete M-35 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the

Cubic Meter

10094.00

1602.00

surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38 4B e i / 5 Providing and casting in situ cement BDF 8 concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

10198.00

1602.00

4B e ii / 5 Providing and casting in situ cement BDF 8 concrete M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings canopy, waist slab with steps as per detailed designs and drawings including centering, formwork, cover blocks compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.8 Page No. 302 and B.7, Page No.38

Cubic Meter

10091.00

1602.00

5A a i / 5 Providing & casting in situ cement BDF 9 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7,

Cubic Meter

8389.00

1577.00

Page No.38 5A a ii / 5 Providing & casting in situ cement BDF 9 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

8305.00

1577.00

5A b i / 5 Providing & casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

8894.00

1577.00

5A b ii / 5 Providing & casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

8844.00

1577.00

5B a i / 5 Providing & casting in situ cement BDF 9 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based

Cubic Meter

9395.00

1602.00

PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38 5B a ii / 5 Providing & casting in situ cement BDF 9 concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

9287.00

1602.00

5B b i / 5 Providing & casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

9950.00

1602.00

5B b ii / 5 Providing & casting in situ cement BDF 8 concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks compacting & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.9 Page No. 303 and B.7, Page No.38

Cubic Meter

9842.00

1602.00

6A a i / 5 Providing and casting in situ cement BDF 11 concrete in M-20 of trap/ granite/

Cubic Meter

8643.00

2206.00

quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with reversible Drum Type mixer with SCADA With natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38 6A a ii / 5 Providing and casting in situ cement BDF 11 concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed Sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Cubic Meter

8009.00

2206.00

6A b i / 5 Providing and casting in situ cement BDF 11 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Cubic Meter

9246.00

2206.00

6A b ii / 5 Providing and casting in situ cement BDF 11 concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed Sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Cubic Meter

9160.00

2206.00

6B a i / 5 Providing and casting in situ cement

Cubic

9885.00

2080.00

BDF 11

concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Meter

6B a ii / 5 Providing and casting in situ cement BDF 11 concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed Sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Cubic Meter

9777.00

2080.00

6B b i / 5 Providing and casting in situ cement BDF 11 concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38

Cubic Meter

10440.00

2080.00

6B b ii / 5 Providing and casting in situ cement BDF 11 concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. pardi 75mm thick fins including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed

Cubic Meter

10332.00

2080.00

Sand. Spec. No.: Bd.F.11 Page No. 304 and B.7, Page No. 38 7A a / 5 BDF 12

Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet amd sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd. F. 12 Page No. 304 & B-7, Pg 38

Cubic Meter

5893.00

1146.00

7A b / 5 BDF 12

Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet amd sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed Sand. Spec. No.: Bd. F. 12 Page No. 304 & B-7, Pg 38

Cubic Meter

5809.00

1146.00

7B a / 5 BDF 12

Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet amd sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd. F. 12 Page No. 304 & B-7,

Cubic Meter

6604.00

852.00

Pg 38 7B b / 5 BDF 12

Providing and casting in situ cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet amd sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed Sand. Spec. No.: Bd. F. 12 Page No. 304 & B-7, Pg 38

Cubic Meter

6497.00

852.00

8/5 BDF 17

Providing and fixing in position TMT - FE 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No.: Bd.F.17, Page No. 306

Metric Tonne

58908.00

4898.00

9/5 BDF 19

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforcement Jali 50mm thick of approved design cement mortar 1:3 and curing complete (including 6mm diameter mild steel bar reinforcement). Spec. No.: Bd. F. 19 Page No. 307

Square Meter

674.00

64.00

Cubic Meter

8878.00

2038.00

10A a i / 5 Providing and casting in situ c.c. M-20 of BDF 6 & trap metal for RCC rectangular grid beam 8 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA

enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38. 10A a ii / 5 BDF 6 & 8

Providing and casting in situ c.c. M-20 of Running trap metal for RCC rectangular grid beam Meter with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete(Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: As directed by Engineer in charge.

8793.00

2038.00

10A b i / 5 BDF 6 & 8

Providing and casting in situ c.c. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

9420.00

2038.00

10A b ii / 5 BDF 6 & 8

Providing and casting in situ c.c. M-25 of Running trap metal for RCC rectangular grid beam Meter with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand.

9335.00

2038.00

Cubic Meter

Spec. No.: As directed by Engineer in charge. 10A c i / 5 Providing and casting in situ c.c. M-30 of BDF 41 trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

9555.00

2038.00

10A c ii / Providing and casting in situ c.c. M-30 of 5 trap metal for RCC rectangular grid beam BDF 41 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

9470.00

2038.00

10A d i / 5 BDF 41

Cubic Meter

10134.00

2038.00

Providing and casting in situ c.c. M-35 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

10A d ii / Providing and casting in situ c.c. M-35 of 5 trap metal for RCC rectangular grid beam BDF 41 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10049.00

2038.00

10A e i / 5 Providing and casting in situ c.c. M-40 of BDF 41 trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10167.00

2038.00

10A e ii / Providing and casting in situ c.c. M-40 of 5 trap metal for RCC rectangular grid beam BDF 41 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10083.00

2038.00

10B a i / 5 Providing and casting in situ c.c. M-20 of BDF 6 & trap metal for RCC rectangular grid beam 8 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering,

Cubic Meter

9885.00

2080.00

formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38. 10B a ii / 5 BDF 6 & 8

Providing and casting in situ c.c. M-20 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement).with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer).... With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

9777.00

2080.00

10B b i / 5 BDF 6 & 8

Providing and casting in situ c.c. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)... With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10776.00

2080.00

10B b ii / 5 BDF 6 & 8

Providing and casting in situ c.c. M-25 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form

Cubic Meter

10669.00

2080.00

surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)…With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38. 10B c i / 5 Providing and casting in situ c.c. M-30 of BDF trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer) With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10682.00

2080.00

10B c ii / Providing and casting in situ c.c. M-30 of 5 trap metal for RCC rectangular grid beam BDF with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)... With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10574.00

2080.00

10B d i / 5 BDF

Cubic Meter

11029.00

2080.00

Providing and casting in situ c.c. M-35 of trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient

minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)... With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38. 10B d ii / Providing and casting in situ c.c. M-35 of 5 trap metal for RCC rectangular grid beam BDF with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)... With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

10921.00

2080.00

10B e i / 5 Providing and casting in situ c.c. M-40 of BDF 41 trap metal for RCC rectangular grid beam with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)... With natural sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38.

Cubic Meter

11133.00

2080.00

10B e ii / Providing and casting in situ c.c. M-40 of 5 trap metal for RCC rectangular grid beam BDF 41 with slab as per detailed design and drawing or as directed including dewatering if necessary, centering, formwork, cover blocks compacting, finishing the form surface with C.M. 1:3 of sufficient minimum thickness to give smooth and

Cubic Meter

11025.00

2080.00

even surface or roughening them if special finish is to be provided and curing complete (Excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant (pan mixer)...With Crushed sand. Spec. No.: Bd.F.6, Page No.300 / Bd.F.8, Page No.302 and B.7 Page No. 38. 11A / 5 BDF

Providing and fixing fan hook box of 2 mm Number thick M.S. sheet rectangular size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface. Spec. No.: As directed by Engineer in charge

259.00

12.00

12a i / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

5925.00

645.00

12a ii / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete.With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer )

Cubic Meter

5851.00

645.00

Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38 12b i / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

6075.00

645.00

12b ii / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

5991.00

645.00

12c i / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

6842.00

645.00

12c ii / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

6782.00

645.00

12d i / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

6833.00

645.00

12d ii / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.work in foundations like raft, strip, foundations, grillage and footings of R.C.C. columns and steel stanchions etc .including bailing out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 3 page No. 298 and B-7, Page No. 38

Cubic Meter

6774.00

645.00

13i a / 5

Cubic

8247.00

833.00

Providing and laying in situ cement

BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Meter

13i b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks,compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Cubic Meter

8161.00

833.00

13ii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Cubic Meter

8489.00

833.00

13ii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (

Cubic Meter

8404.00

833.00

Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38 13iii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Cubic Meter

9535.00

833.00

13iii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Cubic Meter

9476.00

833.00

13iv a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Cubic Meter

9526.00

833.00

13iv b / 5 Providing and laying in situ cement

Cubic

9468.00

833.00

BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.columns as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 5 page No. 300 and B-7, Page No. 38

Meter

14i a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F6 page No. 300 and B-7, Page No. 38

Cubic Meter

8502.00

1234.00

14i b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38

Cubic Meter

8419.00

1234.00

14ii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and

Cubic Meter

8641.00

1234.00

roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38 14ii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38

Cubic Meter

8558.00

1234.00

14iii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38

Cubic Meter

8558.00

1234.00

14iii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7,

Cubic Meter

8499.00

1234.00

Page No. 38 14iv a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C.beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38

Cubic Meter

8546.00

1234.00

14iv b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C.beams and lintels as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300 and B-7, Page No. 38

Cubic Meter

8488.00

1234.00

15i a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38

Cubic Meter

8759.00

1170.00

15i b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Slabs and Landings as

Cubic Meter

8674.00

1170.00

per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete . With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38 15ii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38

Cubic Meter

8908.00

1170.00

15ii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38

Cubic Meter

8822.00

1170.00

15iii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement

Cubic Meter

10190.00

1170.00

& structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38 15iii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38

Cubic Meter

10132.00

1170.00

15iv a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7, Page No. 38

Cubic Meter

10180.00

1170.00

15iv b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Slabs and Landings as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 8 page No. 302 and B-7,

Cubic Meter

10124.00

1170.00

Page No. 38 16i a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10286.00

1853.00

16i b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 25 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10203.00

1853.00

16ii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10431.00

1853.00

16ii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 30 Ready mix of trap /granite /quartzite /gneiss metal, Crushed

Cubic Meter

10348.00

1853.00

Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Crushed Sand---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302 16iii a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10487.00

1853.00

16iii b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 35 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10429.00

1853.00

16iv a / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Natural Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction,

Cubic Meter

10478.00

1853.00

curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete. With Natural Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302 16iv b / 5 Providing and laying in situ cement BDF 3a,b concrete M - 40 Ready mix of trap /granite /quartzite /gneiss metal, Crushed Sand for R.C.C. Rectangular grid beam with slab as per detailed designs & drawing or as directed including centering, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided ( Excluding reinforcement & structural steel ) complete With Crushed Sand ---( Item to be used with prior permission of Superintending Engineer ) Spec. No.: Bd. F 6 page No. 300, B-7, Page No. 38 and Bd. F 8 page No. 302

Cubic Meter

10421.00

1853.00

Bd-G : Brick Work 1/6 BDG 1

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313

Cubic Meter

4917.00

701.00

2/6 BDG 2

Providing first class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth including bailing out water, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering Complete. Spec. No.: Bd.G.2 Page No. 313

Cubic Meter

5103.00

769.00

3/6 BDG 3

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in plinth as backing in composite masonry including bailing out water, striking joints, racking out joints and watering Complete. Spec. No.: Bd.G.3 Page No. 314

Cubic Meter

4804.00

591.00

4/6 BDG 5

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, racking out joints, watering and scaffolding Complete. Spec. No.: Bd.G.5 Page No. 315

Cubic Meter

4984.00

737.00

5/6 BDG 7

Providing second class Burnt Brick Square masonry with conventional/ I.S. type Meter bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering Complete. Spec. No.: Bd.G.7 Page No. 316

675.00

88.00

6/6 BDG 8

Providing Burnt Brick-on-edge masonry with second class bricks of conventional type bricks in cement mortar 1:3

648.00

86.00

Square Meter

including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / one strips of hoop iron 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends, scaffolding, raking out joints and watering complete. Spec. No.: Bd.G.8 Page No. 317 7a / 6 BDG 9

Providing first class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M. 1:3 and watering in pillars of rectangular or square shape as shown on the drawing or as directed complete. Spec. No.: Bd.G.9 (a) Page No. 317

Cubic Meter

5357.00

1104.00

7b / 6 BDG 9

Providing first class Brick masonry with conventional / IS. type bricks in cement mortar 1:4 including scaffolding, racking out joints pointing in C.M 1:3 and watering in pillars of curved shapes, as shown on the drawing or as directed complete. Spec. No.: Bd.G.9 (b) Page No. 317

Cubic Meter

5443.00

1185.00

8a / 6 BDG 10

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding racking out joints and watering in pillar of rectangular shapes as shown in the drawings or as directed complete. Spec. No.: Bd.G.10 (a) Page No. 318

Cubic Meter

5086.00

848.00

8b / 6 BDG 10

Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 including scaffolding, racking out joints and watering in pillar of curved shapes as shown in the drawing or as directed complete. Spec. No.: Bd.G.10 (b) Page No. 318

Cubic Meter

5115.00

927.00

9a / 6 BDG

Providing fly ash brick masonry with conventional / I.S. type fly ash brick in cement mortar 1:6 including striking joints, racking out joints watering and scaffolding complete. For foundation & plinth Spec. No.: As director by engineer

Cubic Meter

5130.00

700.00

incharge and BDG- 2 & 5 9b / 6 BDG

Providing fly ash brick masonry with conventional / I.S. type fly ash brick in cement mortar 1:6 including striking joints, racking out joints watering and scaffolding complete. For superstructure. Spec. No.: As director by engineer incharge and BDG- 2 & 5

10 / 6 BDG

Providing Second class fly ash brick Square masonry with conventional / I.S. type Meter bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. Spec. No.: Bd. G. 7 Page 316

Cubic Meter

5189.00

735.00

810.00

88.00

Bd-H : Stone Masonry 1/7 BDH 1

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water, striking joints on un exposed faces and watering complete. Spec. No.: Bd.H.1 Page No. 329

Cubic Meter

2930.00

1045.00

2/7 BDH 2

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:5 in basements including scaffolding, bailing out water, racking out joints when plastering is to be done striking joints where no pointing or plastering is to be done and watering complete. Spec. No.: Bd.H.2 Page No. 329

Cubic Meter

3091.00

1045.00

3/7 BDH 3

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stone in cement mortar 1:3 in basement with patent water proofing compound added to it at rate of 1 kg per bag of cement including bailing out water, scaffolding racking out joints when plastering is to be done and watering complete. Spec. No.: Bd.H.3 Page No. 331

Cubic Meter

3576.00

1044.00

4/7 BDH 4

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done watering and scaffolding complete. Spec. No.: Bd.H.4 Page No. 331

Cubic Meter

3260.00

1125.00

5/7 BDH 5

Providing random rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in plinth including bailing out water , striking joints on unexposed faces. (Excluding pointing) complete. Spec. No.: Bd.H.5 Page No. 331

Cubic Meter

3012.00

1045.00

6/7 BDH 6

Providing random rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure racking out joints when

Cubic Meter

3260.00

1161.00

plastering is to be done / striking joints when no pointing or plastering is to be done on the inside watering and scaffolding complete. Spec. No.: Bd.H.6 Page No. 332 7/7 BDH 7

Providing random rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in external walls of plinth including bailing out water, racking out joints when pointing is to be done and striking joints from inside including watering complete. Spec. No.: Bd.H.7 Page No. 332

Cubic Meter

3297.00

1292.00

8/7 BDH 8

Providing random rubble masonry first sort of trap /granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints from outside and striking joints when no pointing or plastering is to be done from inside watering and scaffolding complete. Spec. No.: Bd.H.8 Page No. 332

Cubic Meter

3433.00

1357.00

9/7 BDH 11

Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in external walls of plinth including bailing out water, striking joints inside and racking out joints from outside and watering complete Spec. No.: Bd. H.11 Page No. 333

Cubic Meter

6201.00

1292.00

10 / 7 BDH 12

Providing coursed rubble masonry second sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done and striking joints when no plastering is to be done on the inside, watering scaffolding complete. Spec. No.: Bd.H.12 Page No. 333

Cubic Meter

6460.00

1400.00

11 / 7 BDH 13

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in external work of plinth including bailing out water, striking joints inside and watering complete. Spec. No.: Bd.H.13 Page No. 333

Cubic Meter

6381.00

1507.00

12 / 7 BDH 14

Providing coursed rubble masonry first sort of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints on the inside when plastering is to be done, watering and scaffolding complete. Spec. No.: Bd.H.14 Page No. 333

Cubic Meter

6852.00

1693.00

13 / 7 BDH 40

Providing coursed rubble masonry first Cubic sort for pillars of trap / granite / quartzite / Meter gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3 scaffolding and watering complete. Spec. No.: Bd.H.40 Page No. 345

6955.00

1830.00

Bd-I : Cement Concrete Block Masonry 1/8 BDI 1

Providing and laying masonry of I.S. Standard C.C. hollow block 100 x 200 x 400 mm in cement mortar 1:6 proportion for superstructure including curing, scaffolding etc. complete. Spec. No.: Bd.I.1 Page No. 349

Square Meter

508.00

248.00

2/8 BDI 1

Providing and laying masonry of I.S. Standard C.C. hollow block 200 x 200 x 400 mm in cement mortar 1:6 proportion for superstructure including curing, scaffolding etc. complete. Spec. No.: Bd.I.1 Page No. 349

Square Meter

717.00

118.00

3/8 BDI

Providing and constructing masonry in precast solid Concrete Block (Grade D50 As per I.S. 2185, Part-I, 1974, Reframed 1987) having compressive strength 5-00 N/mm2) of size (300 mm x 200 mm x 150mm) in cement mortar 1:6 for super structure including striking joints on unexposed faces, racking out joints on exposed faces, watering, curing and scaffolding etc. complete. Spec. No.: As directed by Engineer in Charge.

Cubic Meter

3747.00

603.00

Bd-J : Water Proofing 1/9 BDJ 2

Providing and laying damp proof course 50mm thick in (1:2:4) cement concrete layer and bitumen / using cement with waterproofing compound curing, formwork etc. complete. Spec. No.: Bd.J.2 Page No. 355

Square Meter

274.00

40.00

2/9 BDJ 3

Providing and applying Bitumen layer at 2 kg. per square meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete Spec. No.: Bd.J.3 Page No. 356

Square Meter

149.00

16.00

3/9 BDJ

Providing leak proof treatment by Injection grouting method to old floor without removing tiles of W.C., bath, with cement sand proportion of 1:1.5 and waterproofing compound at 2 kg/bag of cement mixed in 35 liters of water including drilling holes in required position grouting with above mixed solution and ceiling etc. complete. Spec. No.: As directed by Engineer in charge.

Litre

21.00

8.00

4/9 BDJ

Providing & laying water proof treatment Square of terrace slab with B.B. Coba in all Meter position with an average thickness of 112 mm consisting specialised materials as per the manufactures specifications and covering 10 years guarantee on court fee stamp paper including all lead, lift, etc. complete. Spec. No.: As directed by Engineer in charge.

590.00

237.00

5/9 BDJ

Providing water proof bedding for flooring Square of Bath and W.C. 25 mm thick in C.M.1:3 Meter including using 1 kg of water proof compound per bag of cement including leveling curing etc. complete. Spec. No.: As directed by Engineer in charge.

309.00

113.00

6/9 BDJ

Removing the tar or coba and disposing of the material as directed etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

11.00

11.00

7/9

Providing and applying water proofing

Square

607.00

300.00

BDJ

treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight convering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. Spec. No.: As directed by Engineer in charge

8/9 BDJ

Providing and laying jointless PolydeeSquare LM, a highly flexible elastometric coating Meter for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms/sqm and applying 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkling the AG10 granules on the wet coating. (After finishing covering the treatment with 25mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/sqm to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. Spec. No.: As directed by Engineer in charge

750.00

31.00

9/9 BDJ

Providing and applying a base coat Square comprising of 1 Kg Polydee-MC and 1 Kg Meter fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. Spec. No.: As directed by Engineer in charge

664.00

41.00

10 / 9 BDJ

Providing and fixing 20 to 25 mm thick Square rough shahabad box type waterproofing Meter for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick

797.00

127.00

Meter

Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) ( prior permission of SE shall be obtained before inclusion of item ) Spec. No.: Bd.J.2 Page No. 355 11 / 9 BDJ

Providing and fixing 20 to 25 mm thick Square rough shahabad box type waterproofing Meter treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and Reinforced Cement concrete walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) ( prior permission of SE shall be obtained before inclusion of item ) Spec. No.: Bd.J.2 Page No. 355

728.00

126.00

12 / 9 BDJ

Providing and laying perforated PVC 160 Square mm dia pipe in proper line,level & slope Meter including necessary fitting etc. complete. material etc complete. Spec. No.: As directed by Engineer in charge

835.00

210.00

13 / 9 BDJ

Providing and applying required coats of Square a water based UV resistant Evercrete Meter Top Seal sealant to protect natural stone, bricks, concrete and wooden structures from water intrusion and staining due to water penetration and algue formation etc complete. Spec. No.: As directed by Engineer in charge.

294.00

47.00

14 / 9 BDJ

Providing and applying required coats of Square a water based Evercrete Deep Meter Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete Spec. No.: As directed by Engineer in charge. Note --- For item no. 7 to 14 prior approval of Superintending Engineer will be necessary

483.00

51.00

Bd-K : Expansion Joint 1 / 10 BDK 1

Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both faces and finishing as directed etc. Complete. Spec. No.: Bd.K.1 Page No. 359

Square Meter

2851.00

733.00

2 / 10 BDK 1

Providing expansion joints in R.C.C. Square framed structure (exterior Columns) with Meter plain premoulded filler 25 mm thick and 3 mm thick alluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete as directed. Spec. No.: Bd.K.1 Page No. 359

3332.00

733.00

3 / 10 BDK 1

Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed. Spec. No.: Bd.K.1 Page No. 359

Square Meter

3865.00

733.00

4 / 10 BDK 1

Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete as directed. Spec. No.: Bd.K.1 Page No. 359

Square Meter

3824.00

733.00

5 / 10 BDK

Providing expansion joints in reinforced Square cement concrete framed structure Meter (interior columns) with plain premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate, hold fast, fixing T.W. battens of internal face finishing etc. complete as directed. Spec. No.: Bd K 1 A

4518.00

733.00

6 / 10 BDK

Providing expansion joints in R.C.C. framed structure (exterior column) with plain premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate, hold fast, fixing T.W. battens on internal face and finishing etc. complete.

5350.00

733.00

Square Meter

Spec. No.: Bd.K.1 B 7 / 10 BDK

Providing expansion joints in R.C.C. framed structure (at floor level) with plain premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate, hold fast, fixing T.W. battens of internal face and finishing etc. complete. Spec. No.: Bd.K.1 C

Square Meter

4731.00

667.00

8 / 10 BDK

Providing expansion joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and fixing T.W. battens on inner faces finishing etc. complete as directed. Spec. No.: Bd.K.1 D

Square Meter

4711.00

667.00

9 / 10 BDK

Providing and fixing of BITUFLEX Running CLOSE CELL FOAM of size 30 mm x Meter 30 mm in double layer in the expansion joints in R.C.C framed structure (at floor level / at terrace level / interior columns) for overlapping of closed cell foam joints, applying TP- 40 PRIMER on both the sides of concrete surface, filling the 25 mm x 25 mm gap with the POLYDEE-41 highly flexible sealant and covering the joint with Polydee-LM, 150 mm width in 2 coats etc. complete. Spec. No.: As directed by Engineer in charge

1491.00

97.00

10 / 10 BDK

Providing and fixing of BITUFLEX Running CLOSE CELL FOAM of size 30 mm x 30 Meter mm in double layer in the expansion joints in R.C.C. framed structure (Exterior column) with closed cell foam , applying TP-40 PRIMER on both the sides of concrete surface, filling the 25 mm x 25 mm gap with the POLYSEAL, highly flexible sealant and covering the joint with Polydee- LM, 150 mm width in 2 coats and fixing the aluminium plate of 100 mm wide and 3 mm thick on external face of column etc. complete. Spec. No.: As directed by Engineer in charge Note – for item no 9&10 Prior approval of Superintending Engineer is Necessary before execution of work

1680.00

93.00

Bd-L : Plastering and Pointing 1a / 11 BDL 1

Providing internal cement plaster 6 mm Square thick in a single coat in cement mortar 1:4 Meter without neeru finish to concrete surface in all positions including scaffolding and curing complete. Spec. No.: Bd.L.1 Page No. 367

98.00

67.00

1b / 11 BDL 1

Providing internal cement plaster 6 mm Square thick in a single coat in cement mortar 1:3 Meter without neeru finish to concrete surface in all positions including scaffolding and curing complete. Spec. No.: Bd.L.1 Page No. 367

104.00

70.00

2a / 11 BDL 2

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd. L.2 Page No. 368

Square Meter

139.00

81.00

2b / 11 BDL 2A

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd. L.2 Page No. 368

Square Meter

148.00

81.00

2c / 11 BDL 2B

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing complete. Spec. No.: Bd.L.2 Page No. 368

Square Meter

157.00

81.00

3a / 11 BDL 4

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete Spec. No.: Bd.L.4 Page No. 368

Square Meter

251.00

156.00

3b / 11 BDL 4A

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete.

Square Meter

261.00

156.00

Spec. No.: Bd.L.4 Page No. 368 3c / 11 BDL 4B

Providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.4 Page No. 368

Square Meter

284.00

156.00

4 / 11 BDL 5

Providing internal cement plaster 25mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick or stone surfaces, in all positions including scaffolding and curing complete. Spec. No.: Bd.L.5 Page No. 368

Square Meter

311.00

178.00

5 / 11 BDL 7

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Spec. No.: Bd.L.7 Page No. 369

Square Meter

356.00

222.00

6 / 11 BDL 8

Providing rough cast cement plaster Square externally in two coats to concrete, brick Meter or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. Spec. No.: Bd.L.8 Page No. 370

336.00

191.00

7 / 11 BDL 9

Providing rough cast cement plaster Square externally in two coats with coloured Meter cement finish to concrete/ brick/ stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. completed Spec. No.: Bd.L.9, Page No.370

347.00

191.00

8 / 11 BDL 10

Square Meter

26.00

20.00

9a / 11 Providing flush grooved pointing with BDL 15A cement mortar 1:3 for brick work including scaffolding and curing complete. Spec. No.: Bd. L.15 Page No. 372

Square Meter

82.00

63.00

9b / 11 Providing flush grooved pointing with BDL 15B cement mortar 1:3 for stone masonry work including scaffolding and curing complete. Spec. No.: Bd. L.15 Page No. 372

Square Meter

89.00

63.00

10 / 11 BDL 16

Providing tuck pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete. Spec. No.: Bd. L. 16 Page No. 373

Square Meter

89.00

63.00

11 / 11 BDL 17

Providing weathered pointing with cement Square mortar 1:3 for stone masonary including Meter scaffolding and curing complete. Spec. No.: Bd. L. 17 Page No. 373

86.00

62.00

12 / 11 BDL 18

Providing vee pointing with cement mortar 1:3 for stone masonry including scaffolding and curing complete Spec. No.: Bd. L. 18 Page No. 373

Square Meter

81.00

63.00

13 / 11 BDL

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

48.00

32.00

14 / 11 BDL

Labour charges for providing groove in external plaster having width of 2.5 c.m. and spaced at a distance of 45 c.m. etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

20.00

20.00

15a / 11 BDL

Providing patti on plastered surface 12 mm to 15 mm thick in c.m. 1:3 line and level including neat finishing scaffolding curing etc. complete.a) 75 mm Spec. No.: As directed by Engineer in charge.

Running Meter

18.00

12.00

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing complete. Spec. No.: Bd. L.10, Page No.370

15b / 11 BDL

Providing patti on plastered surface 12 mm to 15 mm thick in c.m. 1:3 line and level including neat finishing scaffolding curing etc. complete b) 100 mm Spec. No.: As directed by Engineer in charge.

Running Meter

26.00

18.00

15c / 11 BDL

Providing patti on plastered surface 12 mm to 15 mm thick in c.m. 1:3 line and level including neat finishing scaffolding curing etc. complete c) 150 mm Spec. No.: As directed by Engineer in charge.

Running Meter

38.00

24.00

16 / 11 BDL

Providing and fixing chicken mesh jali (24 Square gauge) at the junction of 2 different Meter surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in Charge:

72.00

21.00

17 / 11 BDL

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. Spec. No.: As directed by Engineer in Charge.

Square Meter

57.00

31.00

18 / 11 BDL

Providing and applying spray plaster made with finely graded marble and quartz in 2 mm thickness in two coats using putty knife or trowel to newly plaster fairly even surface after minimum 30 days gap in all position including finishing the surface using zero number sand paper or fine emry paper gently level the area by moving paper in round circles removing the dust and clean the surface with dry cloth and scaffolding including all materials and labour etc. complete. Spec. No.: As directed by Engineer in Charge.

Square Meter

172.00

25.00

19 / 11 BDL

Providing and applying laying Aggregate plaster in granite / marble stones, as decorative finish to give granite / marble

Square Meter

1101.00

249.00

like appearance to concrete, brick or block surfaces in all position including preparation of surface smoothly, evenly by racking of joints in case of Brick or block work including backing layer of 12 mm thick with cement mortar 1:3 with 2% integral cement water proofing compound, roughening for wall keying hardening and drying the surface for a minimum five days gaps including second coat of cement lime mortar into a proportion 1:4 preparing the surface for three coat of marble finish plaster giving a thin coat of white cement and two parts of course calcite powder, applying the mortar with steel float on the surface in proper evenness applying at coat of white cement and lime to set a smooth finish then applying a thin coat of slurry made of white cement and black oxide colour in required proportion by the steel float to get black streaks on the surface and curing the surface for two days including all materials and labour etc. complete. Spec. No.: As directed by Engineer in Charge. 20 / 11 BDL

Providing and applying plaster / wall Square punning with plaster of paris ( with plaster Meter of paris material of Ambuja / Mor Chap or equivalent make ) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.: As directed by Engineer in charge.

330.00

164.00

21 / 11 BDL

Providing and applying gypsum plaster ( Square with Gypsum material of Gypsum India / Meter Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. Spec. No.: As directed by Engineer in charge.

373.00

164.00

22 / 11

Providing and applying Texture plaster

502.00

198.00

Square

BDL

with finishing with With Purlina / Rustic texture material ( with texture material of Asian / Renava/Nitco/Temtex or equivalent company make ) in 3 to 4 millimeter thickness on previously finished plastered surface ,including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface scaffolding etc.complete. ( Excluding Texture Paint and Texture Paint Finishing ) Spec. No.: As directed by Engineer in charge. Note – For item no. 18 to 22 Prior approval of Superintending Engineer is Necessary

Meter

Bd-M : Paving,Flooring and Dado 1a / 12 BDM 1

Square Meter

471.00

113.00

1b / 12 Providing and laying Rough Shahabad BDM 1A Stone Flooring 40mm.to 45 mm. thick & of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. Spec. No.: Bd.M.1 Page No. 379

Square Meter

527.00

116.00

1c / 12 Providing and laying Rough Shahabad BDM 1B Stone Flooring 50mm to 60mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete Spec. No.: Bd.M.1 Page No. 379

Square Meter

591.00

121.00

2 / 12 BDM 3

Square Meter

559.00

118.00

3 / 12 Providing and laying Polished Tandur Square BDM 3A Stone flooring 25mm to 30mm thick Meter required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. Spec. No.: Bd.M.3 Page No. 380

696.00

127.00

4 / 12 Providing and laying machine cut BDM 3B machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

834.00

134.00

Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. Spec. No.: Bd.M.1 Page No. 379

Providing and laying Polished Shahabad Stone flooring 25mm to 30mm thick and required width wide in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints, with neat cement slurry, curing, polishing and cleaning complete. Spec. No.: Bd.M.3 Page No. 380

Square Meter

Spec. No.: Bd.M.3 Page No. 380 5A a i / 12 BDM 6

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing complete. With Natural Sand Spec. No.: Bd.M.6 Page No. 381

Square Meter

301.00

128.00

5A a ii / 12 BDM 6

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing complete. With Crushed Sand. Spec. No.: Bd.M. 6 Page No. 381

Square Meter

289.00

128.00

5A b i / 12 BDM 6

Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing complete. With Natural Sand Spec. No.: Bd.M.6 Page No. 381

Square Meter

316.00

128.00

5A b ii / 12 BDM 6

Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing complete. With Crushed Sand. Spec. No.: Bd.M.6 Page No. 381

Square Meter

315.00

128.00

5B a i / 12

Providing and laying cement concrete flooring 50 mm thick with M15 cement

Square Meter

329.00

128.00

BDM 6

concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing complete. With Natural Sand Spec. No.: Bd.M.6 Page No. 381

5B a ii / 12 BDM 6

Providing and laying cement concrete flooring 50 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc finishing smooth (with extra cement) in any colour as directed and curing complete. With Crushed Sand. Spec. No.: Bd.M.6 Page No. 381

Square Meter

328.00

128.00

5B b i / Providing and laying cement concrete 12 flooring 50mm thick with M20 cement BDM 6A concrete laid to proper level & slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing complete. With Natural Sand Spec. No.: Bd.M.6 Page No. 381

Square Meter

357.00

128.00

5B b ii / Providing and laying cement concrete 12 flooring 50mm thick with M20 cement BDM 6A concrete laid to proper level & slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing complete. With Crushed Sand. Spec. No.: Bd.M.6 Page No. 381

Square Meter

356.00

128.00

6a / 12 BDM 22

Square Meter

648.00

214.00

Providing and laying machine cut machine polished shahabad Stone slabs 20 to 25mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry,

curing, polishing and cleaning complete. Spec. No.: Bd.M.22 Page No. 390 6b / 12 BDM 22

1055.00

222.00

Square Meter

817.00

139.00

7b / 12 Providing sills of polished Kadappa stone Square BDM 29B 25mm to 30mm thick, on a bed of 1:4 Meter cement mortar including cement float, filling joints with slurry, curing polishing and cleaning complete. Spec. No.: Bd.M.29 Page No. 391

712.00

139.00

8 / 12 BDM 41

Providing and fixing black kadappa stone Square shelves 25mm. thick machine polished, Meter extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc complete. Spec. No.: Bd.M.29 Page No. 391

767.00

140.00

9 / 12 BDM 12

Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/ Asian or equivalent make having size 30 cm x 30 cm confirming I.S.15622/2006 (group D IIA)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing complete. Spec. No.: Bd.M.12 Page No. 385.

Square Meter

797.00

245.00

10a / 12 BDM 13

Providing and laying ceramic tiles of RAK/Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 30 cm. for dado and skirting in required position with readymade adhesive mortar of

Square Meter

842.00

223.00

Providing and laying machine cut Square machine polished machine cut Kota Meter stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. Spec. No.: Bd.M.22 Page No. 390

7a / 12 Providing sills of polished Kota stone 25 BDM 29B mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning complete. Spec. No.: Bd.M.29 Page No. 391

approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. Spec. No.: Bd.M.13 Page No. 386. 10b / 12 BDM 13

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 45 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. Spec. No.: Bd.M.13 Page No. 386.

Square Meter

943.00

414.00

10c / 12 BDM 13

Providing and laying ceramic tiles of RAK/ Kajaria / Nitco /Asian or equivalent make having size 30 cm. x 60 cm. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing complete. Spec. No.: Bd.M.13 Page No. 386.

Square Meter

1028.00

414.00

11a / 12 BDM

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete.for Flooring Spec. No.: As directed by Engineer in charge. Note –Prior approval of S.E. will be necessary

Square Meter

443.00

61.00

11b / 12 BDM

Providing Mirror polishing to Kota Stone Running including using all necessary stones and Meter equipments cleaning, washing etc. complete.for Skirting Spec. No.: As directed by Engineer in charge. Note –Prior approval of S.E. will be necessary

46.00

14.00

12 / 12 BDM

Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete.

638.00

71.00

Square Meter

Spec. No.: As directed by Engineer in charge 13a / 12 BDM 35

Providing 25 mm to 30 mm thick partition Square of polished black kadappa stone slab of Meter approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement complete. a) One side polish Spec. No.: Bd.M.35 B/P No.393

832.00

294.00

13b / 12 BDM 35

Providing 25 mm to 30 mm thick partition Square of polished black kadappa stone slab of Meter approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement complete. b) Both side polish Spec. No.: Bd.M.35 B/P No.393

1012.00

304.00

14 / 12 BDM 3

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. Spec. No.: Bd.M. 3 B/Page No. 380

Square Meter

3620.00

169.00

15 / 12 Providing and fixing machine cut Square BDM 22 machine polished 18 mm to 20 mm thick Meter telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1;4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec. No.: Bd. M.22 B/Page No. 390

3697.00

232.00

16a / 12 Providing and fixing machine cut mirror BDM 35 polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. A) Both side polish Spec. No.: Bd.M.35 /Page No.393

Square Meter

3797.00

356.00

16b / 12 Providing and fixing machine cut mirror BDM 35 polished 18 mm to 20 mm thick

Square Meter

3780.00

356.00

telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etc. complete. B) One side polish Spec. No.: Bd.M.35 /Page No.393 17 / 12 Providing and preparing kitchen otta Square BDM 35 made up from 30 mm thick and 75 cm. Meter wide one side polished kadppa top 75 cm. wide one side polished kadappa top 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. Spec. No.: Bd.M.35C / Page No. 393

2508.00

705.00

18 / 12 Providing and fixing 1.5 mm thick Square BDM 35 polyvenyl venyl chloride flooring Meter including leveling the base with white cement including pasting with appropriate material cleaning the surface etc. complete. Spec. No.: Bd.M.35C / Page No. 393

477.00

8.00

19A a / Providing and laying vitrified mirror / Square 12 glossy finish tiles decorative type RAK/ Meter BDM 12 Kajaria/ Nitco/ Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Spec. No.: Bd.M. 12 Page No.385

852.00

100.00

19A b / Providing and laying vitrified mirror / Square 12 glossy finish tiles of RAK/ Kajaria/ Nitco/ Meter BDM 12 Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and

1012.00

158.00

clearing etc. complete. b) Skirting Spec. No.: Bd.M. 12 Page No.385 19B a / Providing and laying vitrified matt fininsh Square 12 tiles of RAK/ Kajaria/ Nitco/ Asian or Meter BDM 12 equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.a) flooring Spec. No.: Bd.M.12 Page No. 385

1150.00

100.00

19B b / Providing and laying vitrified matt finish Square 12 tiles of RAK/ Kajaria/ Nitco/ Asian or Meter BDM 12 equivalent make having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.b) Skirting Spec. No.: Bd.M.12 Page No. 385

1316.00

158.00

19C a / Providing and laying vitrified rustic matt Square 12 stone finish tiles of RAK/Kajaria/ Nitco/ Meter BDM 12 Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring Spec. No.: Bd.M.12 Page No. 385

1435.00

100.00

19C b / Providing and laying vitrified rustic matt Square 12 stone finish tiles of RAK/ Kajaria/ Nitco/ Meter BDM 12 Asian or equivalent make having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting

1582.00

158.00

Spec. No.: Bd.M.12 Page No. 385 19D a / Providing and laying vitrified stone effect Square 12 finish tiles of RAK/Kajaria/ Nitco/ Asian Meter BDM 12 or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring Spec. No.: Bd.M. 12 Page No. 385

1765.00

100.00

19D b / Providing and laying vitrified stone effect Square 12 finish tiles of RAK/ Kajaria/ Nitco/ Asian Meter BDM 12 or equivalent make having size 590 to 605 mm x 590 to 605 mm of 8 to 10 mm thickness and confirming to IS. 156222006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortarincluding neat cement float, filling joints, curign and cleaning etc. complete. b) Skirting Spec. No.: Bd.M. 12 Page No. 385

1904.00

158.00

20 / 12 Providing and fixing green marble of 18 BDM 12 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Spec. No.: Bd. M. 12

Square Meter

1420.00

384.00

21A i / 12 Providing and fixing heavy duty inter BDM locking concrete Gray paving blocks of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. Spec. No.: A directed by Engineer in charge

Square Meter

513.00

82.00

21A ii / 12 BDM

Square Meter

622.00

82.00

Providing and fixing heavy duty inter locking concrete Gray paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and

shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. Spec. No.: A directed by Engineer in charge 21B i / 12 Providing and fixing heavy duty inter Square BDM locking concrete Coloured paving blocks Meter of 60 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.: A directed by Engineer in charge

568.00

82.00

21B ii / 12 BDM

Providing and fixing heavy duty inter Square locking concrete Coloured paving blocks Meter of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.: As directed by Engineer in charge

655.00

82.00

22a / 12 BDM 12

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) Spec. No.: As directed by Engineer incharge.

Square Meter

793.00

82.00

22b / 12 BDM

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.: As directed by Engineer incharge.

Square Meter

859.00

82.00

23a / 12 BDM

Providing and fixing heavy duty inter locking concrete Gray paving blocks of 40 mm thickness of having a strength of 200 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to

Square Meter

412.00

82.00

30 mm thick including skirting joints and cleaning etc. complete Spec. No.: As directed by Engineer in charge 23b / 12 BDM

Providing and fixing heavy duty inter Square locking concrete Coloured paving blocks Meter of 40 mm thickness of having a strength of 200 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete Spec. No.: As directed by Engineer in charge

439.00

82.00

24 / 12 BDM

Providing leather finished polishing to Square Granite Stone slab by continuous Meter grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Spec. No.: As directed by Engineer in charge

408.00

75.00

25 / 12 BDM

Providing leather finished polishing to Square Kota / Marble / Shahabad / Kadappa Meter Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. Spec. No.: As directed by Engineer in charge

373.00

72.00

26a / 12 BDM 12

Providing and laying Vitrified Square mirror/glossy finish RAK/ Kajaria /Nitco / Meter Aisan / Coral Or equivalent make having decorative type of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 156222006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete. Spec. No.: Bd. M-12 page No. 385

889.00

93.00

26b / 12 BDM 12

Providing and laying Vitrified MATT Square finish RAK/ Kajaria /Nitco / Aisan / Coral Meter Or equivalent make having decorative type of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 156222006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete. Spec. No.: Bd. M-12 page No. 385

1192.00

93.00

26c / 12 BDM 12

Providing and laying Vitrified RUSTIC MATT STONE finish RAK/ Kajaria /Nitco / Aisan / Coral Or equivalent make having decorative type tiles of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete.

Square Meter

1508.00

93.00

Spec. No.: Bd. M-12 page No. 385 26d / 12 BDM 12

Providing and laying Vitrified STONE EFFECT FINISH RAK/ Kajaria /Nitco / Aisan / Coral Or equivalent make having decorative type tiles of size 590 millimeter to 605 millimeter x 590 millimeter to 605 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc complete. Spec. No.: Bd. M-12 page No. 385

Square Meter

1785.00

93.00

27 / 12 BDM

Providing and laying chequered tiles of approved quality of company RAK / Kajaria / Nitco / Asian or equivalent make of size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning

Square Meter

787.00

455.00

curing complete. Spec. No.: Bd. M-12 28 / 12 BDM

Providing and laying Antiskid Ceramic Square tiles of approved quality of company Meter RAK / Kajaria / Nitco / Asian or equivalent make of size 30 cm x 30 cm and confirming to IS 15622-2006 (GroupB IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing complete. Spec. No.: Bd. M-12

908.00

393.00

29 / 12 BDM

Providing and laying telephone black / Square Amba White / Cadburybrown / RBI red / Meter Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Specifications: Bd. M. 12

3812.00

459.00

30a / 12 BDM

Providing Half-round Moulding ( Full Running Moulding ) to 18 mm to 20 mm thick Meter granite stone including fine polishing and cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

122.00

87.00

30b / 12 BDM

Providing Half-round Moulding ( Full Moulding ) to 18 mm to 20 mm thick Marble / Kota stone including fine polishing and cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

Running Meter

103.00

76.00

31a / 12 BDM

Providing Quarter-round Moulding ( Half Running Moulding ) to 18 mm to 20 mm thick Meter granite stone including fine polishing and cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

99.00

70.00

31b / 12 BDM

Providing Quarter-round Moulding ( Half Moulding ) to 18 mm to 20 mm thick Marble / Kota stone including fine polishing and cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

79.00

59.00

Running Meter

32a / 12 BDM

Providing Chamfer Of Required size to Running granite stone including fine polishing and Meter cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

54.00

35.00

32b / 12 BDM

Providing Chamfer Of Required size to 18 mm to 20 mm thick Marble / Kota stone including fine polishing and cleaning etc complete. Spec. No.: As directed by Engineer-InCharge

Running Meter

41.00

29.00

33 / 12 BDM

Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25mm to 30mm thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing complete. Spec. No.: Bd. M-3 page No. 380 Note- Water absorption for item No,19 should not exceed 0.05% Note – For item no. 14 to 33 Prior approval of S.E. will be necessary..

Square Meter

1456.00

444.00

Bd-N : Wood finish 1a / 13 Providing and applying boiled linseed oil BDN 1.1 in one coat, to the new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed. Spec. No.: Bd. N. 1. 1 Page No. 399

Square Meter

12.00

7.00

1b / 13 Providing and applying boiled linseed oil BDN 1.1 in two coats to the new wood work, including knotting, preparing the surface, scaffolding etc. complete as directed. Spec. No.: Bd.N.1.1 Page No. 399

Square Meter

19.00

12.00

2a / 13 Providing and applying Wax polishing to BDN 1.2 the new wood work including knotting, preparing the surface, scaffolding etc. complete as directed. Spec. No.: Bd.N.1.2 Page No. 399

Square Meter

24.00

20.00

2b / 13 Providing and applying Wax polishing to BDN 1.2 the old wood work including knotting, preparing the surface, scaffolding etc. complete as directed. Spec. No.: Bd. N. 1.2 Page No. 399

Square Meter

20.00

13.00

3a / 13 Providing and applying French polishing BDN 1.3 for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed Spec. No.: Bd.N.1.3 Page No. 399

Square Meter

55.00

35.00

3b / 13 Providing & applying french polishing to BDN 1.3 new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed. Spec. No.: Bd.N.1.3 Page No. 399

Square Meter

106.00

76.00

4 / 13 Providing and applying varnish in one BDN 1.4 coat on previously varnished wood work including knotting, preparing the surface, scrapping, scaffolding, etc. complete. Spec. No.: Bd.N.1.4 Page No. 400

Square Meter

17.00

9.00

5 / 13 Providing and applying Varnish in two BDN 1.4 coats on new wood work including knotting, preparing the surface, scaffolding etc. Complete. Spec. No.: Bd.N.1.4 Page No. 400

Square Meter

27.00

13.00

6 / 13 BDN

Providing and applying melamine polish Square of required finish to the wood work by Meter spray machine including knotting and preparing the even surface by scraping, applying French polishing, scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. Spec. No.: As directed by Engineer-in charge.

655.00

315.00

Bd-O : Oil Painting 1 / 14 BDO 1

Providing and applying two coats of Square lead/zinc base oil paint/ bituminous paint Meter of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat complete. Spec. No.: Bd.O. 1 Page No. 403

51.00

12.00

2 / 14 BDO 2

Providing and applying one coat of Square lead/zinc base oil paint/ bituminious paint Meter of approved colour and shade to old wood work previously painted and fiber boards including if necessary scaffolding, preparing surface excluding primer coat complete. Spec. No.: Bd.0.2 Page No. 404

27.00

5.00

3 / 14 BDO 2A

Providing and applying two coats of Square lead/zinc base oil paint/bituminious paint Meter of approved colour and shade to old wood work and fiber boards previously painted including if necessary scaffolding, preparing the surface excluding priming coat complete. Spec. No.: Bd.0.2 Page No. 404

41.00

12.00

4 / 14 BDO 3

Providing & applying two coats of Square lead/zinc base oil paint/ bituminious paint Meter of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface. (excluding primer coat). Spec. No.: Bd.0.3 Page No. 404

50.00

13.00

5a / 14 BDO 4

Providing and applying one coat of Square aluminium paint of approved make to new Meter structural steel work in building and workshop including scaffolding if necessary, cleaning and preparing surface (excluding primer coat) complete. Spec. No.: Bd.0.4 Page No. 405

43.00

10.00

5b / 14 BDO 4A

Providing and applying 2 coats of Square alluminium paint of approved make to Meter new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.4 Page No. 405

61.00

16.00

6 / 14 BDO 5

Providing and applying two coats of Square synthetic enamel paint of approved colour Meter to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.5 Page No. 405

54.00

16.00

7a / 14 BDO 6

Providing and applying one coat of flat oil Square paint of approved colour to the old Meter structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface(excluding primer coat) complete. Spec. No.: Bd.0.6 Page No. 406

32.00

10.00

7b / 14 BDO 6A

Providing and applying 2 coats of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.6 Page No. 406

Square Meter

46.00

17.00

8a / 14 BDO 7

Providing and applying one coat of flat oil Square paint of approved colour and shade to Meter internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.7 Page No. 406

30.00

10.00

8b / 14 BDO 7A

Providing and applying 2 coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) complete. Spec. No.: Bd.0.7 Page No. 406

Square Meter

47.00

16.00

9 / 14 BDO 8

Providing and applying two coats of water Square proof cement paint of approved Meter manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days complete. Spec. No.: Bd.0.8 Page No. 406

38.00

17.00

10 / 14 BDO 8B

Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

8.00

8.00

11 / 14 BDO 8C

Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

16.00

4.00

12 / 14 BDO 8D

Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrappers and sand paper, scaffolding etc. complete. Spec. No.: As directed by En-gineer in charge.

Square Meter

15.00

7.00

13 / 14 BDO 8E

Providing and applying priming coat on Square concrete/ masonary/ Asbestos Cement Meter plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required. Spec. No.: As directed by Engineer in charge.

15.00

4.00

14 / 14 BDO 8F

Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

10.00

5.00

15 / 14 BDO

Providing and applying pearl/ luster finish Square paint of approved colour and shade to the Meter existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc.

193.00

83.00

complete. Spec. No.: As directed by Engineer in charge. 16 / 14 BDO

Providing and applying two coats of Square textured synthetic paint of approved Meter shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete Spec. No.: As directed by Engineer in charge.

17 / 14 BDO

Providing and applying two coats of appex Appex Ace white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days complete Spec. No.: As directed by Engineer in charge.

Square 143.00 Meter

69.00

18 / 14 BDO

Providing and applying two coats of exterior white weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary , and watering the surface for two days complete Spec. No.: As directed by Engineer in charge.

Square 142.00 Meter

69.00

Note- For item no. 15 to 18 prior approval of Superintending Engineer will be necessary

113.00

19.00

Bd-P : Colour,white washing,distempering 1a / 15 BDP 1

Providing and applying white-wash in one coat on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete. Spec. No.: Bd.P.1 Page No. 411

Square Meter

4.00

2.00

1b / 15 BDP 1A

Providing and applying white-wash in two Square coats on old / new plastered or masonry Meter surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down complete. Spec. No.: Bd. P. I Page No. 411

6.00

3.00

2a / 15 BDP 2

Providing and applying colour-wash of approved colour and shade in one coat to new surface including scaffolding, brushing and brooming down (excluding base coats of white wash) etc. complete. Spec. No.: Bd. P.2 Page No. 412

Square Meter

5.00

2.00

2b / 15 BDP 2A

Providing and applying colour-wash of approved colour and shade in two coats to new surface including scaffolding, brushing and brooming down (excluding base coat of white-wash) etc. complete. Spec. No.: Bd.P.2 Page No. 412

Square Meter

10.00

4.00

3a / 15 BDP 3

Providing and applying colour-wash of approved colour and shade in one coat to old surfaces which are to be recoloured including scaffolding, brushing and brooming down. (excluding base coat of white wash) etc. complete. Spec. No.: Bd.P.3 Page No. 412

Square Meter

5.00

2.00

3b / 15 BDP 3A

Providing and applying colour-wash of approved colour and shade in two coats to old surfaces which are to be recoloured including scaffolding, brushing and brooming down. (excluding base coat of white-wash) etc. complete. Spec. No.: Bd.P.3 Page No. 412

Square Meter

9.00

4.00

4a / 15 BDP 4

Providing and applying washable powder Square distemper of approved colour and shade Meter to old & new surfaces in one coat

12.00

4.00

including scaffolding, preparing the surfaces (excluding the priming coat) complete. Spec. No.: Bd.P.4 Page No. 413 4b / 15 BDP 4A

Providing and applying washable powder Square distemper of approved colour and shade Meter to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat) complete. Spec. No.: Bd. P.4 Page No. 413

17.00

5.00

5a / 15 BDP 5

Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in one coat including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. Spec. No.: Bd. P.5 Page No. 413

Square Meter

24.00

7.00

5b / 15 BDP 5A

Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. Spec. No.: Bd.P.5 Page No. 413

Square Meter

35.00

8.00

6a / 15 BDP 6

Providing and applying plastic emulsion Square paint of approved quality, colour and Meter shade to old & new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) complete. Spec. No.: Bd.P.6 Page No. 414

59.00

14.00

6b / 15 BDP 6A

Providing and applying plastic emulsion Square paint of approved quality, colour and Meter shade to old and new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) complete. Spec. No.: Bd.P.6 Page No. 414

78.00

18.00

7 / 15 BDP

Removing white wash or colour wash by steel wire brushing and / or scrapping sand preparing and preparing the wall surface smooth including necessary repairs to scratches etc. complete. Spec. No.: As directed by Engineer in charge.

4.00

2.00

Square Meter

8 / 15 BDP

Extra for washing and cleaning of decorated wall surfaces with soap, soda and water. Spec. No.: As directed by Engineer in charge.

Square Meter

2.00

1.00

Bd-Q : Wood work 1a / 16 BDQ 1

Providing and fixing Ghana teak wood planking 25 mm thick for flooring plained on both sides, tongued and grooved including scaffolding, if necessary, and one coat of primer complete. Spec. No.: Bd.Q. 1 Page No. 419

Square Meter

2097.00

76.00

1b / 16 Providing and fixing Ghana teak wood BDQ 1A planking 50 mm thick for flooring plained on both sides, tongued and grooved including scaffolding, if necessary, and one coat of primer complete. Spec. No.: Bd.Q.1 Page No. 419

Square Meter

4106.00

76.00

Providing and fixing Ghana teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer complete. Spec. No.: Bd.Q.2 Page No. 420

Cubic Meter

91039.00

2231.00

3 / 16 Providing and fixing Jungle (hard) wood BDQ 2A of approved species joists and girders in timber floor of single, double or framed type including scaffolding if necessary and one primer coat complete. Spec. No.: Bd.Q.2 Page No. 420

Cubic Meter

37377.00

3011.00

Square Meter

1842.00

109.00

2 / 16 BDQ 2

4 / 16 BDQ 3

Providing and fixing Ghana teak wood plank ceiling 20 mm thick tongued and grooved including iron screws, scaffolding, if necessary, including one primer coat on under side and one coat of coal tar on upper side complete. Spec. No.: Bd.Q.3 Page No. 421

5 / 16 BDQ 4

Providing and fixing Ghana teak wood framed collar beam / king post / queen post truss, with all Iron work including scaffolding, if necessary, and one coat of primer complete. Spec. No.: Bd.Q.4, Page No. 422

Cubic Meter

98993.00

8050.00

6 / 16 Providing and fixing in jungle wood BDQ 4A framed collar beam / king post / queen post truss, with all iron work including scaffolding, if necessary and primer coat complete. Spec. No.: Bd.Q.4, Page No. 422

Cubic Meter

48584.00

8137.00

7a / 16 BDQ 5

Providing and fixing Ghana teak wood common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates and posts for roofing etc. including scaffolding, if necessary, all iron work and one coat of primer complete. Spec. No.: Bd.Q.5, Page No. 423

Cubic Meter

96511.00

7236.00

7b / 16 Providing and fixing jungle wood BDQ 5A common rafters, purlins and purlin cleats, hip rafters, jack rafters, ridges, wall plates, post plates & posts for roofing, etc. including scaffolding, if necessary all iron work and one coat of primer complete. Spec. No.: Bd.Q.5, Page No. 423

Cubic Meter

42969.00

7236.00

8 / 16 BDQ 8

Providing and fixing Ghana teak wood Running hand rail of 60 mm x 75 mm as per Meter detailed drawings or as directed by the Engineer, including french polishing, etc. complete. (Note : The work to be executed on preapproval of Superintending Engineer) Spec. No.: Bd.Q.8, Page No. 425

693.00

228.00

9 / 16 BDQ 18

Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of Ghana teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish complete. Spec. No.: Bd.Q. 18 Page No. 431

Square Meter

1117.00

128.00

10 / 16 BDQ 19

Providing and fixing Ghana teak wood eaves boards 15 cm wide and 25 mm thick plain decorative type including scaffolding and painting with two coats complete. Spec. No.: Bd.Q. 19 Page No. 432

Running Meter

403.00

76.00

11 / 16 Providing and fixing seasoned and Running BDQ 19A treated jungle wood of approved species Meter eaves board 15 cm wide and 25 mm thick plain decorative type including scaffolding and painting with two coats complete. Spec. No.: Bd.Q. 19 Page No. 432

205.00

73.00

12 / 16 BDQ 20

Providing and fixing Ghana Teak wood eaves plate of size 10cm wide and 20 mm thick including scaffolding and painting in two coats complete. Spec. No.: Bd.Q.20 Page No. 432

Running Meter

209.00

48.00

13 / 16 BDQ 21

Providing and fixing country teak wood Running barge board 22 cm wide and 20mm thick Meter plain type including scaffolding and painting in two coats complete. Spec. No.: Bd.Q.21 Page No. 433

415.00

120.00

14 / 16 Providing and fixing seasoned and Running BDQ 21A treated jungle wood of approved species Meter barge board 22 cm wide and 20 mm thick plain type including scaffolding and painting in two coats complete. Spec. No.: Bd.Q.21 Page No. 433

240.00

102.00

15 / 16 BDQ

Providing and fixing shutter to wall Square cupboard made from 19 mm thick Teak Meter particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete.(Excluding cupboard frame) Spec. No.: As directed by Engineer in charge.

1740.00

369.00

16 / 16 BDQ

Providing and fixing Shutter to wall Cupboard consisting of Ghana Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame) Spec. No.: As directed by Engineer in charge.

1962.00

364.00

Square Meter

Bd-R : Roofing and ceiling 1 / 17 BDR 1

Providing and fixing Mangalore tiled roofing with class " AA" tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 25 mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles). Spec. No.: Bd.R.1, Page No. 449

Square Meter

692.00

88.00

2 / 17 BDR 2

Providing and fixing Mangalore tiled Square roofing with class "AA" tiles including Meter securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing country teak wood sloping battens of 25 x 12 mm teak wood horizontal battens of 50mm x 25mm over the slopping battens, all iron work and coal tarring the battens complete (Excluding ridge & hip tiles) Spec. No.: Bd.R.2, Page No. 450

667.00

60.00

3 / 17 BDR 3

Providing and fixing Mangalore tile ridge and hip tiles of class "AA" including scaffolding if necessary, pointing with coloured cement mortar and curing complete. Spec. No.: Bd.R.3, Page No. 450

Running Meter

149.00

63.00

4a / 17 BDR 5

Providing and fixing plain zinc sheeting Square of 0.80 mm thick (22 B.W.G.) over the Meter ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iror screws and bolts and lead and bitumen washers complete.(Weight of 6.8 kg/sq.m.) Spec. No.: Bd.R.5, Page No. 453

760.00

79.00

4b / 17 BDR 5

Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised / iron screw / bolt and lead / bitumen washers as per drawing complete.(Weight of 5.5 kg/sq.m.) Spec. No.: Bd.R.5, Page No. 452

Square Meter

674.00

79.00

5 / 17 BDR 7

Providing and fixing 6.00 mm thick Square Asbestos Cement Corrugated (Big size) Meter sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band

341.00

78.00

bituminous G.I. washers, galvanised iron clamps and bolts and nuts and scaffolding complete. Spec. No.: Bd. R.7, Page No. 453 6 / 17 BDR 9

Providing and fixing 6 mm thick Asbestos Running Cement Semi ridge capping for roofing Meter including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts and nuts including scaffolding complete. Spec. No.: Bd.R.9, Page No. 455

277.00

81.00

7a / 17 BDR 10

Providing and fixing valley gutter of 22 Running B.W.G. (0.8mm) plain galvanised iron Meter sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank (excluding painting to underside of plank) Spec. No.: Bd. R. 10, Page No. 455

2290.00

299.00

7b / 17 Providing and fixing valley gutter of 22 Running BDR 10A B.W.G. (0.8mm) plain galvanised iron Meter sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank (excluding painting to underside of plank). Spec. No.: Bd. R. 10, Page No. 455

1666.00

171.00

8 / 17 Providing and fixing valley gutter of 24 Running BDR 10B B.W.G. 0.63 mm thick G.I. sheet 120 cm Meter wide with 20 mm thick teak wood planking underneath coal tarring etc. complete. Spec. No.: Bd. R. 10, Page No. 455

2184.00

171.00

9 / 17 BDR 11

Providing and fixing glass tiles of Mangalore type at required places in Mangalore tile roof including scaffolding necessary. Spec. No.: Bd. R. 11, Page No. 456

Number

453.00

29.00

10 / 17 BDR 13

Providing and fixing Mangalore pattern Number cowl ventilator tiles in the required places in a Mangalore tiled roof including scaffolding necessary. Spec. No.: Bd. R. 13, Page No. 459

92.00

26.00

11 / 17 BDR 16

Providing and fixing false ceiling of plain asbestos cement sheets 4 mm thick with teak wood beadings 45 x 12 mm with

1020.00

122.00

Square Meter

frame work of teak wood battens of size 70 x 60 mm at 1.00 M center to center including scaffolding, if necessary, all iron work and painting (visible surfaces) to A.C. sheet and beading in two coats complete (excluding T.W. runner to be paid separately). (only for repair works) Spec. No.: Bd.R.16, Page No. 460 12 / 17 BDR

Providing and fixing frame work of Square anodised aluminium sections for Meter suspended false ceiling consisting of aluminium T 50 mm x 40 mm weighing 0.39 kg/m. at 60 cms c/c & fixed with ( 15 x 15 mm) flanges weighing 0.119 kg/m suspended on 6 mm dia. mild steel rod weighing 0.22 kg/m fixed on wall and beams including rounding of the edges with aluminium T of 50 mm x 40 mm weighing 0.39 kg/m etc. including all labour etc, complete. Spec. No.: As directed by Engineer in charge.

809.00

323.00

13 / 17 BDR

Providing and fixing frame work of galvanised iron for suspended false ceiling which includes galvanised iron perimeter channels of size 27 mm & 0.5 mm thick having one flange of 20 mm and another of 30 mm along with perimeter of the ceiling, fixing in brick wall / partition with the help of rawal plugs and screws, suspending galvenised iron intermediate channels of size 45 mm and 0.9 mm thick with two flanges of 15 mm each from the soffit at 1200 mm centers with steel galvanised iron hanger of width 25 mm x 0.5 mm fasteners, ceiling section of 0.5 mm thickness having curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mmcenters, 12.5 mm dry walls screws at 230 mmcenters; fixing screws mechanically either with screw driver or drilling machine with suitable attachmentetc. complete. Spec. No.: As directed by Engineer in charge.

625.00

289.00

Square Meter

14 / 17 BDR 17

Providing and fixing false ceiling of teak Square wood particle board half perforated sheet Meter 12 mm thick including scaffolding, if necessary, all iron work and two coats of oil painting to boards and beading i.e. visible surface (excluding frame work and runners) Spec. No.: Bd. R. 17 Page No. 461

669.00

87.00

15 / 17 BDR

Providing and fixing false ceiling of 10 Square to12 mm thick decorative boards of Meter fibrous plaster of paris including scaffolding if necessary all architectural work like mouldings, cornices, coves, domes, cups as per detailed drawings and three coats of spray painting to boards etc. complete. (excluding frame work, runners and mild steel suspenders) Spec. No.: As directed by Engineer in charge.

688.00

83.00

16 / 17 BDR 19

Providing and fixing false ceiling of 12mm thick tabular Acoustic Armstrong/ Everest/ AMS boards of approved make, shape and sizes as per drawings including powder coated G.I. wall angle of 20mm x 20mm size, G.I. grid runners of size 20mm x 38mm at 600mm center to center both ways and suspended using G.I. wire 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

1449.00

311.00

17 / 17 BDR

Providing and fixing false ceiling of 15mm thick Acoustic tubular Armstrong/ Everest/ AMS (0.60 x 0.60 m.) boards of approved make, shape and sizes as per drawings including powder coated G.I. wall angle of 20mm x 20mmx 0.6 x 0.6mm size, G.I. grid runners of size 15mm x 38mm at 600mm center to center both ways and suspended using G.I. 3mm wire including fixing using butterfly clips and fasteners including transporting, scaffolding all necessary labour and machinery, finishing etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

1541.00

289.00

18 / 17 BDR 17

Providing and fixing false ceiling of T.W. partical board half perforated sheets 12 mm thick with frame work of M.S. angle 40 x 40 x 5 mm and T of size 40 x 40 x 6 mm at 60 cm center to center including 12 mm dia. hangers, T.W. battens 50 x 25 mm and beading 25 x 15 mm thick scaffolding, if necessary, all iron work and two coats of painting to boards and beading i.e. visible surface. Spec. No.: Bd. R. 17, Page No. 461

Square Meter

1113.00

297.00

19 / 17 BDR 17

Providing and fixing False ceiling of 12 Square mm thick Laminated board with frame of Meter M.S. angle 40 x 40 x 5 mm and Tee of size 40 x 40 x 6mm at 60 cm c/c including 12 mm dia. hangers, T.W. battens 50 x 25 mm and beading 25 x 15 mm thick scaffolding if necessary, all Iron work etc. complete. Spec. No.: Bd. R. 17, Page No. 461

1831.00

255.00

20 / 17 BDR

Providing and applying two coats of bitumen to roof on new dungaree cloth one coat on each side etc. complete as directed. Spec. No.: As directed by Engineer in charge.

Square Meter

74.00

49.00

21 / 17 BDR

Providing and applying one coat of bitumen to roof (without cloth) including scaffolding etc. complete as directed. Spec. No.: As directed by Engineer in charge.

Square Meter

29.00

19.00

22 / 17 BDR

Removing and resetting Mangalore tiles Square from roof including refixing loose battens. Meter Spec. No.: As directed by Engineer in charge.

39.00

39.00

23 / 17 BDR

Removing the tiles, battens and dungry Square cloth purlins, rafters and ridges etc. from Meter roof, sorting out the serviceable and unserviceable materials and stacking the same as and where directed in the compound, scaffolding etc. complete. Spec. No.: As directed by Engineer in charge

29.00

29.00

24 / 17 BDR

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc.

36.00

36.00

Square Meter

including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. Spec. No.: As directed by Engineer in charge. 25 / 17 BDR

Removing and lowering the roof truss carefully without damaging the members and stacking as and where directed in the compound including scaffolding etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

106.00

106.00

26 / 17 BDR

Removing R.S. girders of any size and span lowering the same and stacking neatly wherever directed in the compound scaffolding etc. complete. Spec. No.: As directed by Engineer in charge.

Metric Tonne

988.00

988.00

27 / 17 BDR

Providing fixing teak wood battens 50 Running mm x 25 mm for Mangalore tile roof work Meter with all iron work scaffolding and oiling the battens complete. Spec. No.: As directed by Engineer in charge.

77.00

10.00

28 / 17 BDR

Providing fixing teak wood battens 25 Running mm x 12 mm for Mangalore tile roof work Meter with iron work scaffolding and oiling the battens complete. Spec. No.: As directed by Engineer in charge.

58.00

10.00

29 / 17 BDR

Providing and fixing sky light in R.C.C. roof including frame made of M.S. angle 50 x 50 x 6 mm with hold fast, sheet glass 5 mm thick, Chicken mesh 24 gauge with all accessories and required fixtures and fastening fitting including painting etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

1005.00

50.00

30 / 17 BDR

Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc complete Spec. No.: As directed by Engineer in

Number

82.00

24.00

charge. 31 / 17 BDR 3

Providing fixing Mangalore tile roofing with class AA tiles in cement mortar 1:4 on sloping slab including necessary scaffolding curing, finishing, etc. complete. Spec. No.: Bd. R. 3A., Page No. 449

Square Meter

571.00

68.00

32 / 17 BDR

Providing and fixing colour coated Square Zincalume ( R ) AZ150 ( min 150 Meter gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness ( BMT ) (0.5mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, selfdrilling screw etc. complete. (weight of profile 4.52 kg/sqm) Spec. No.: As directed by Engineer in charge.

901.00

44.00

33a / 17 BDR

Providing and fixing of colour coated Zinc Running alume( R ) AZ150 ( min 150 gms/sq.mt. Meter total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness ( BMT ) (0.5mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated wtih Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality

968.00

44.00

super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, selfdrilling screw etc. complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width) Spec. No.: As directed by Engineer in charge. 33b / 17 BDR

Providing and fixing of colour coated Zinc Running aluminium ( R ) AZ150 ( min 150 Meter gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45mm Base Metal Thickness ( BMT ) (0.5mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capacity groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, selfdrilling screw etc. complete. (weight of profile 4.52 kg/sqm) 601 mm to 900 mm

1032.00

44.00

girth (Surface Width) Spec. No.: As directed by Engineer in charge. 34 / 17 BDR

Providing and fixing UPVC Roof made Square up of 3 layers roofing material of Meter thickness 2mm having with of 1130 mm and of required Length having Tensile strength not less than 330 kg/cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete. Spec. No.: As directed by Engineer in charge.

1015.00

51.00

35 / 17 BDR

Providing and fixing PVC coloured Ridge Square tiles over UPVC roofing where required Meter having size 113cm x 41cm and height 9.5 cm for ridge including fastening with self drilling screw having washers made of stainless steel etc complete. Spec. No.: As directed by Engineer in charge.

557.00

29.00

Bd-T : Doors and windows 1a / 18 BDT

Providing and fixing frame with / without ventilator of size as specified with Ghana teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

96131.00

16495.00

1b / 18 BDT

Providing and fixing frame with / without ventilator of size as specified with non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

48850.00

16495.00

2 / 18 BDT 4

Providing and fixing the Ghana teak wood second class fully glazed openable fanlight rectangular in shape as per detailed drawing excluding the frame,stainless steel fixtures and fastenings and finishing the wood work with 3 coats of oil painting. Spec. No.: Bd-T-4 Page No. 479

Square Meter

2392.00

677.00

3 / 18 Providing and fixing Ghana teak wood BDT 7 & double or single leaf second class fully 8 paneled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. Spec. No.: Bd-T-7 & 8 Page No. 481-82

Square Meter

4885.00

1241.00

4 / 18 BDT 11

Square Meter

2772.00

703.00

Providing and fixing ghana teak wood single leaf paneled door shutter without fanlight and 25mm thick as per drawing consisting of Ghana T.W. top rail size 100mm x 25mm and bottom lock rail 200mm x 25mm insert pannel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixture and fastening and T.W. beading to junctions of paneled inserts and as instructed by the

Engineer in charge including 3 coats of oil painting etc. complete. Spec. No.: As directed by Engineer in charge. 5 / 18 BDT 11

Providing and fixing single leaf paneled Square door shutter without fanlight and shutter Meter 35 mm thick as per drawing consisting of Ghana T.W. top rail size 100mm x 35 mm and bottom and lock rail 200mm x 35mm insert panel 12 mm thick commercial ply faced T.W. particle board with phenol formaldehyde synthetic resin (Generally confirming to ISI 3097) excluding frame, including stainless steel fixtures fastening and T.W. beading at junction of panels inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. Spec. No.: As directed by Engineer in charge.

4099.00

1139.00

6 / 18 BDT 11

Providing and fixing single or double leaf Square paneled door shutter excluding frame Meter with glazed openable fanlight shutter 35 mm thick as per detailed drawing consisting Ghana.T.W. vertical styles 100 mm x 35 mm and lock and bottom rail 200 mm x 35 mm and panels 12 mm thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete. Spec. No.: As directed by Engineer in charge.

3036.00

621.00

7 / 18 BDT 12

Providing and fixing Ghana teak wood Square double or single leaf paneled shutters, Meter 35 mm thick style and rail and 25 mm thick panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete. Spec. No.: Bd-T-11 & 12, Page No. 482483

4773.00

1235.00

8 / 18 BDT 34

Providing and fixing solid core flush door Square shutter in single leaf 32 mm thick Meter

2105.00

315.00

decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No.: Bd-T-34, Page No. 499 9 / 18 BDT 36

Providing and fixing solid core flush door Square shutter commercial in single leaf 32 mm Meter thick without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast, stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting 3 coats complete. Spec. No.: Bd-T-36, Page No. 500

1472.00

315.00

10 / 18 BDT

Providing and fixing solid core flush door Square commercial type on single leaf 16 mm Meter thick Bison Panel cement bonded particle Board including Teak wood lipping beading on all four edges without ventilator commercial type of exterior grade as per detailed drawings with wrought iron hold fast,stainless steel fixtures and fastenings and handles on both sides and finishing with oil painting three coats complete. Spec. No.: As directed by Engineer in charge.

1804.00

326.00

11 / 18 BDT 39

Providing and fixing Ghana teak wood Square single leaf door shutter with teak wood Meter style and rail of 25 mm thick including fixing 50 mm x 25 mm size welded mesh of 10 gauge as per detailed drawing or as directed with stainless steel fixture and fastening finishing with 3 coats of oil painting etc. complete. Spec. No.: Bd-T-39, Page No. 500

2703.00

299.00

12 / 18 BDT

Providing and fixing factory made paneled door shutter in single leaf 35 mm thick style and rail without ventilator with Ghana T.W. panels 12 mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc. complete. Spec. No.: As directed by Engineer in

1497.00

205.00

Square Meter

charge. 13 / 18 BDT

Providing and fixing Ghana teak wood single leaf paneled door shutters 35 mm thick style and rail and 19 mm thick Ghana T.W. panels as per detailed drawing including wrought iron hold fast stainless steel fixtures and fastening and three coats of oil painting etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

3781.00

436.00

14 / 18 BDT 42

Providing and fixing fully glazed double Square leaf window shutter with openable Meter fanlight including Ghana teak wood 25 mm thick style and rails with plain / obscured glass panels as per drawing or as directed by the Engineer in charge with stainless steel fixtures and fastening and finishing the wood work with oil painting three coats etc. complete. Spec. No.: Bd-T-42, Page No. 503

2391.00

596.00

15 / 18 BDT 42

Providing and fixing Ghana Teak Wood window with double leaf half glazed and half paneled shutter with ventilator including wrought iron hold fast, stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete. Spec. No.: Bd-T-42, Page No. 503

Square Meter

2771.00

539.00

16 / 18 BDT 43

Providing and fixing Ghana teak wood Square windows with double leaf 25 mm thick Meter planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete. Spec. No.: Bd-T-43, Page No. 503

3441.00

415.00

17 / 18 BDT 43

Providing and fixing ghana teak wood windows / ventilators with double leaf paneled shutters 25 mm thick without ventilators as per detailed drawing including stainless steel fixtures and fastenings and finishing the wood work with oil painting 3 coats etc. complete. Spec. No.: Bd-T-43, Page No. 503

3945.00

494.00

Square Meter

18 / 18 BDT 53

Providing and fixing steel window of Square various sizes as per detailed drawing Meter without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, oil painting two coats complete. Spec. No.: Bd-T-53, Page No. 509

2912.00

544.00

19 / 18 BDT 53

Providing and fixing steel window of Square various sizes as per detailed drawing Meter without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) Spec. No.: Bd-T-53, Page No. 509

3263.00

367.00

20 / 18 BDT

Providing and fixing steel window C.R.C. Square sheet as per I.S. 1513 : 1986. gauge Meter sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm center with all accessories Spec. No.: As directed by Engineer in charge.

2520.00

416.00

21a / 18 BDT 55

Providing and fixing rolling shutter Square fabricated from steel laths of minimum Meter thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover

3525.00

351.00

of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear) Spec. No.: Bd.T.55, Page No. 510 21b / 18 BDT 55

Providing and fixing rolling shutter Square fabricated from steel laths of minimum Meter thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (With mechanical gear) Spec. No.: Bd.T.55, Page No. 510

4727.00

391.00

22 / 18 BDT 57

Providing and fixing collapsible steel Square gate in one / two leaves with hot rolled Meter vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer & oil painting etc. complete. (I.S. 105211983). Spec. No.: Bd.T.57, Page No. 511

2923.00

796.00

23 / 18 BDT 67

Providing and fixing partition of welded mesh of 3 mm dia. wires 50 mm x 25 mm size mesh including integrated non teak seasoned wood frame 80 x 50 mm of vertical and horizontal scantling and finishing with oil painting 3 coats etc. complete. Spec. No.: Bd-T-67, Page No. 515

Square Meter

1521.00

404.00

24 / 18 BDS

Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete. Spec. No.: Bd.S . Page No. 465 to 467

Square Meter

583.00

56.00

25 / 18 BDT 53

Providing and fixing steel ventilator fully Square glazed partly fixed as per detailed Meter drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete. Spec. No.: Bd. T. 53, Page No. 509 & As directed by Engineer in charge.

2216.00

311.00

26 / 18 BDT 53

Providing and fixing steel ventilator fully Square glazed partly fixed as per detailed Meter drawing with hot dip zinc coating including fabricating glazing with plain / obscured glass pans and approved type quality and iron oxidized fixtures and fastening with guard bars 12 mm square 10 cm c/c and oil painting 2 coats etc.

3050.00

466.00

complete. Spec. No.: Bd. T. 53, Page No. 509 and As directed by Engineer in charge. 27 / 18 BDT

Providing and fixing M.S. grill door 24 Square kg/sqm of various size as per detailed Meter drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. Spec. No.: As directed by Engineer in charge.

2212.00

719.00

28 / 18 BDT

Providing and fixing Ghana.T.W. Running bedding of size 40 mm x 20 mm to the Meter door frame of size 60 mm x 100 mm / 110 mm including chamfering finishing with 3 coats of oil painting etc. complete Spec. No.: As directed by Engineer in charge.

111.00

26.00

29a / 18 BDT

Providing and fixing steel frame of angle Square 50 x 50 x 6 mm size for window with 16 Meter mm with mild steel bars horizontally at 10 cm c/c for ventilator portion and at 15 cm c/c for remaining portion with M.S. flat of size 40 x 6 mm vertical at center including iron hold fast boxes for fixing 40 x 6 mm vertical at center including iron hold fast boxes for fixing shutters including welding finishing painting etc. complete. Spec. No.: As directed by Engineer in charge.

1917.00

273.00

29b / 18 BDT

Providing and fixing steel frame of angle Square 40 x 40 x 5 mm size for windows with 16 Meter mm dia. mild steel bars horizontally at 10 cm c/c for ventilator portion and 15 cm c/c for remaining portion with M.S. flat of size 40 x 6 mm vertical at center including hold fast & iron oxidized fixtures boxes for fixing 40 x 6 mm fixing shutters including welding finishing painting etc. complete. Spec. No.: As directed by Engineer in charge

1444.00

248.00

30a / 18 BDT

Providing and fixing steel frame door of Square angle 50 x 50 x 6 mm mild steel bars Meter with 16 mm dia. horizontally at 10mm c/c for ventilator portion including iron hold fast boxes for fixing shutters including

971.00

220.00

welding, finishing, painting etc. complete. Spec. No.: As directed by Engineer in charge. 30b / 18 BDT

Providing and fixing steel frame door of angle 40 x 40 x 5 mm with 16 mm dia. mild steel bars horizontally at 10cm c/c for ventilator portion including iron hold fast for the fixing shutters including welding, painting, finishing etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

881.00

220.00

31i / 18 BDT

Providing and fixing in position. (as per Square I.S.1868 / 1982) Aluminium sliding Meter window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour Anodising with box Spec. No.: As directed by Engineer-incharge.

4211.00

925.00

31ii / 18 BDT

Providing and fixing in position. (as per Square I.S.1868 / 1982) Aluminium sliding Meter window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at

3523.00

925.00

weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. with colour Anodising without box Spec. No.: As directed by engineer-incharge. 31iii / 18 Providing and fixing in position. (as per Square BDT I.S.1868 / 1982) Aluminium sliding Meter window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box . Spec. No.: As directed by engineer-incharge.

4801.00

925.00

31iv / 18 Providing and fixing in position. (as per BDT I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x

3915.00

925.00

Square Meter

38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box Spec. No.: As directed by engineer-incharge. 32i / 18 BDT

Providing and fixing in position (as per Square 1868 / 1982) Aluminium sliding window Meter of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with colour Anodising with box Spec. No.: As directed by engineer-incharge.

3647.00

1052.00

32ii / 18 BDT

Providing and fixing in position (as per Square 1868 / 1982) Aluminium sliding window Meter of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete with colour Anodising without box Spec. No.: As directed by engineer-incharge.

3231.00

1158.00

32iii / 18 Providing and fixing in position (as per Square BDT 1868 / 1982) Aluminium sliding window Meter of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, completewith powder coating with box Spec. No.: As directed by engineer-in-

4360.00

1158.00

charge. 32iv / 18 Providing and fixing in position (as per Square BDT 1868 / 1982) Aluminium sliding window Meter of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. with powder coating without box Spec. No.: As directed by engineer-incharge.

3498.00

1158.00

33 / 18 BDT

3957.00

424.00

Providing and fixing 29 mm thick factory Square made PVC rigid foam paneleddoor Meter shutters manufactured by M/s Rajshri or equivalent made from MS tube of 19 gauge thickness size 19 mm x 19mm for styles and 15 mm x 15 mm for top and bottom rails, covered with heat moulded PVC C channel of 5 mm thick and 30 mm X50 mm wide PVC sheet for top rail, lock rail and bottom rail on either side and 5 mm thick, 20 mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet fitted in the M.S frame welded/sealed to the styles and rails with 5mm x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc. complete as per manufacturers specification and direction of Engineer in charge fixed to the frames with stainless steel hinges of 75 mm size, stainless steel tower bolt 100 mm size, stainless steel handles

100 mm size including all material, labour, machinery etc. complete ( for WC, bath shutter) ( The item is exclusive of door frame) Spec. No.: As directed by Engineer in charge. 34 / 18 BDT

Providing and fixing Rajshri brand or Square equivalent factory made 34 mm thick Meter moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. The inner panels laminated with 2 mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panels design inn different plain and /or prelamcolours on one side after routing the moulded design on flush doors and 2 mm plain and /or prelam PVC on other side using rubber adhesive on flush door andsolventcement adhesive on the PVC lipping etc. as per direction of Engineer in charge and manufacturers specification and drawing etc. complete. Spec. No.: As directed by Engineer in charge.

4664.00

559.00

35 / 18 BDT

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for the following sizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer. Spec. No.: As directed by Engineer in charge.

Square Meter

849.00

160.00

36a / 18 BDT

Providing and fixing in position Square alluminium openable window of any size Meter as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete. a) Without powder coating Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of

4227.00

415.00

item weight at 6.90 kg / Sqm is considered 36b / 18 BDT

Providing and fixing in position Square alluminium openable window of any size Meter as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete. b) With powder coating Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of item weight at 6.90 kg / Sqm is considered

4759.00

414.00

37a / 18 BDT

Providing and fixing in position Square alluminium fixed window fully glazed of Meter any size as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. a) Without powder coating . Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of item weight at 6.90 kg / Sqm is considered

3213.00

414.00

37b / 18 BDT

Providing and fixing in position Square alluminium fixed window fully glazed of Meter any size as per detailed drawing and as directed by Engineer-in-charge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete. b) With powder coating Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of item weight at 6.90 kg / Sqm is considered

3590.00

414.00

38a / 18 BDT

Providing and fixing in position alluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer-incharge with all necessary alluminium

3979.00

434.00

Square Meter

sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. a) Without powder coating Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of item weight at 6.90 kg / Sqm is considered 38b / 18 BDT

Providing and fixing in position Square alluminium partly openable and partly Meter fixed window of any size as per detailed drawing and as directed by Engineer-incharge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick float glass etc. complete. b) With powder coating . Spec. No.: As directed by Engineer in charge. Note – While arriving at the rate of item weight at 6.90 kg / Sqm is considered

4177.00

434.00

39a / 18 BDT

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamber conforming to I.S. 6524-1983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . Spec. No.: As directed by engineer-incharge.

Running Meter

658.00

169.00

39b / 18 BDT

Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamber conforming to I.S. 6524-1983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm Spec. No.: As directed by engineer-incharge.

Running Meter

692.00

169.00

40a / 18

Providing and fixing fiber glass

Square

3111.00

227.00

BDT

reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No.: As directed by engineer-incharge.

40b / 18 BDT

Providing and fixing fiber glass Square reinforced polyster door shutter 35 mm Meter thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No.: As directed by engineer-incharge.

4114.00

227.00

41 / 18 BDT

Providing and fixing 24 gauge plain Square aluminium sheet on the face of door Meter shutter including cutting to required size and fixing the screws including making good the damages if any to existing door shutter and frame etc. complete as directed or as per detailed drawing. Spec. No.: As directed by Engineer in charge.

667.00

198.00

42a / 18 BDT

Providing and fixing in position, Double Square shuttered aluminium extruded powder Meter coated openable door of specified size with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours,

15460.00

4746.00

Meter

and equipment etc. Spec. No.: As directed by Engineer in charge. 42b / 18 BDT

Providing and fixing in position, Single Square shuttered aluminium extruded powder Meter coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc. Spec. No.: As directed by Engineer in charge.

11269.00

1436.00

43 / 18 BDT

Providing and fixing 50 mm x 50 mm Square Mild Steel square pipe framed steel Meter windows of various sizes as per details with welded square bars 12 mm at 10 cm center to center without hot dip zinc coating without / with ventilator including fabrication, glazing with plain / obscured glass panes of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete. Spec. No.: As directed by Engineer in charge.

2470.00

450.00

44 / 18 BDT

Providing and fixing in position powder Square coated aluminium louvered windows / Meter ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of

2757.00

176.00

approved quality etc. complete. Spec. No.: As directed by Engineer in charge. 45 / 18 BDT

Providing and fixing partitions partitions Square made up of Ghana teakwood frame of Meter size 75 mm x 50 mm at 60 cm c/c with 9 mm thick commercial ply and 4mm thick veneer on both sides with French polish etc. complete. Spec. No.: As directed by Engineer in charge.

3824.00

312.00

46 / 18 BDT

Providing and fixing Ghana teak wood Square partly veneered and partly glazed Meter partition with 75 mm x 50 mm frame at 60 cm center and 9 mm thick commercial ply on both sides, decorative veneer of 4 mm thick and plain glass 5 mm thick, including French polishing etc. complete Spec. No.: As directed by Engineer in charge.

2179.00

329.00

47 / 18 BDT

Providing and fixing welded mesh of 50 mm x 25 mm and (11 gauge) to Ghana Teak Wood frame work as per detailed drawing or as directed, iron fastening with one coat of primer, scaffolding, including TW frame work of 70 mm x 75 mm and covering Ghana T.W. battens of 45 mm x 10 mm etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

1157.00

38.00

48 / 18 BDT

Providng supplying and fixing in position Square anodised extruded aluminum partitions, Meter partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 12823-1990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions as per approved drawing etc. compete Spec. No.: As directed by Engineer in charge.

2419.00

380.00

49 / 18 BDT

Providing and fixing in position . Square extruded aluminium partitions having Meter frame made out of extruded tubular section of size 65 mm x 40 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 129231990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 mm x 12 mm (conical) as per drawing etc. complete. Spec. No.: As directed by Engineer in charge.

2571.00

461.00

50 / 18 BDT

Providing and fixing fly proof mesh Square shutter to ventilator/window using CCTW Meter members of size 45 x 22 mm for frame work and 35 x 22 mm for middle support and fixing fly proof mesh on it and covering CCTW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete. Spec. No.: As directed by Engineer in charge.

2230.00

239.00

51 / 18 BDT

Providing coloured anodising treatment Square to aluminium sections of the doors , Meter windows, and ventilators including all the intermediate supports , side supports, screws and all the necessary fixtures with all leads, lifts, fixing charges etc. complete ( Complete measurement on actual square meter basis of opening area shall be paid.) Spec. No.: As directed by Engineer in charge.

895.00

49.00

52 / 18 BDT

Providing and fixing aluminium grill Square diamond mesh type DG-202 of 7.5 mm Meter thick including fixing in position anodised aluminium frame section of 80 x 38 mm x 1.22 mm size box, cutting to the required size with all wastage , labour, lead lift etc. complete. Spec. No.: As directed by Engineer in charge.

3764.00

691.00

53 / 18

Providing and fixing in position Mild steel Square

1925.00

753.00

BDT

fixed staggered ( Z Type )Ventilator as per detailed drawing with hot deep zink coating including fabricating with Mild steel 'Z 'Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kg/Rmt,with stainless steel mosquito net of 304 Grade,4 mm thick float glass as directed by Engineer In charge including necessary welding ,grinding, two coats of oil paint etc.complete. Spec. No.: As directed by Engineer Incharge

54 / 18 BDT

Providing and fixing in position anodised Square (as per IS 1868/1982) Aluminium fixed Meter staggered ( Z Type )Ventilator with aluminium rectangular pipe 63 mm x 38.10 mm x 1.22 mm at weight 0.650 Kg/Rmt, Aluminium angle of size 15 mm x 15 mm x 1 mm,aluminium channel of 9 mm sizes, S.S.mosquito net of 304 Grade,4 mm thick float glass per detailed drawing & as directed by Engineer in charge etc.complete. Spec. No.: As directed by Engineer Incharge

2992.00

614.00

55 / 18 BDT

Providing and fixing welded mesh of 11 gauge wires having mesh size 50 mm x 25 mm including M.S Angle frame of size 35 mm x 35 mm x5 mm in position with oil painting 3 coats etc. complete. Spec. No.: As directed by Engineer Incharge

Square Meter

1550.00

414.00

56 / 18 BDT

Providing & Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kg/Cum.density and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete. Spec. No.: As directed by Engineer Incharge

Square Meter

2682.00

826.00

57 / 18 Bd-T

Providing and fixing 30mm thick “RAJSHRI” or equivalent BRAND FACTORY MADE SOLID PANEL PVC

Square` 4561.00 Meter

Meter

454.00

INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded “Rajshri” PVC ‘C’ channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. Spec. No.: As Directed By Engineer Incharge 58 / 18 Bd-T

Providing and fixing 30mm thick Square 4760.00 “RAJSHRI” or equivalent BRAND Meter FACTORY MADE PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm ( 5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineerin-charge, manufacturer’s specification & drawing.

454.00

Spec. No.: As Directed by Engineer-incharge Note –For item no. 42,45,46,48,52 &56 Prior approval of Superintending Engineer will be necessary

Bd-U : Iron Work 1a / 19 BDU 1

Providing and fixing mild steel grill work Square for windows, ventilators etc. 20 kg./sq.m. Meter as per drawing including fixtures, necessary welding & painting with one coats of anticorrosive paint & two coats of oil painting complete. Spec. No.: Bd.U.1 Page No. 537

1414.00

79.00

1b / 19 BDU 1A

Providing and fixing mild steel grill work Square for windows, ventilators, etc. 15 kg/sq.m Meter as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Spec. No.: Bd.U.1 Page No. 537

1129.00

79.00

2a / 19 BDU 2

Providing and fixing mild steel grill railing Square 20 kg/sq.m with Ghana teak wood hand Meter rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fixtures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. Spec. No.: Bd.U.2 Page No. 537

2163.00

131.00

2b / 19 BDU 2A

Providing and fixing mild steel grill railing Square 15 kg/sq.m with teak wood hand rail of Meter size 75mm x 60 mm and sill of 75mm.x 25mm and newel posts for staircases, including fabricating, fixtures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colours and polishing the sill, hand rail and the newel post with french polish. Spec. No.: Bd.U.2 Page No. 537

1909.00

137.00

Bd-V : Water supply and sanitory fittings 1a / 20 BDV 1

852.00

94.00

Running Meter

1118.00

94.00

1c / 20 Providing and laying cast iron pipes of B Running BDV 1B class of 150mm diameter with sockets Meter and spiget ends/ flanges and cast centrifugally/ vertically including specials, laying pipes and back filling the trench complete including excavation. Spec. No.: Bd.V.1 Page No. 547

1528.00

94.00

2a / 20 BDV 2

Providing and laying cast iron pipes of B Running class of 80mm diameter with sockets and Meter spigot ends/ flanges and cast centrifugally/ vertically including specials, laying pipes and back filling the trench complete including excavation. Spec. No.: Bd.V.1 Page No. 547

1b / 20 Providing and laying cast iron pipes of B BDV 1A class of 100mm diameter with sockets and spigot ends/ flanges and cast centrifugally/vertically including specials, laying pipes and back filling the trench complete including excavation. Spec. No.: Bd.V.1 Page No. 547

Providing and making lead joints for 80mm diameter cast iron pipe line including lead and testing. Spec. No.: Bd.V.2 Page No. 549

Number

345.00

20.00

2b / 20 Providing and making lead joints for BDV 2A 100mm diameter cast iron pipes line including lead and testing. Spec. No.: Bd.V.2 Page No. 549

Number

429.00

20.00

2c / 20 Providing and making lead joints for BDV 2B 150mm diameter cast iron pipe line including lead and testing Spec. No.: Bd.V.2 Page No. 549

Number

489.00

20.00

Providing and making flanged connection Number for the 80mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete. Spec. No.: Bd.V.3 Page No. 550

91.00

34.00

3b / 20 Providing and making flanged connection Number BDV 3A for the 100mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete. Spec. No.: Bd.V.3 Page No. 550

96.00

41.00

3a / 20 BDV 3

3c / 20 Providing and making flanged connection Number BDV 3B for the 150mm diameter cast iron pipe line including painting rubber insertion, nuts and bolts etc. complete. Spec. No.: Bd.V.3 Page No. 550

133.00

51.00

4a / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 15 mm dia. heavy grade having Meter embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

197.00

51.00

4b / 20 BDV 5

Providing and fixing on walls/ ceiling/ floors 20 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/meter with necessary fitting remaking good the demolished portion and applying primer of anticorrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551c

Running Meter

239.00

69.00

4c / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 25 mm dia. heavy grade having Meter embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

316.00

69.00

4d / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 32 mm dia. heavy grade having Meter embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5 Page No. 551

401.00

73.00

4e / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 40 mm dia. heavy grade having Meter embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings & remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete.

444.00

76.00

Spec. No.: Bd.V.5 Page No. 551 4f / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 50 mm dia heavy grade having embossed Meter as ISI Mark galvanised iron pipes weight of 6.33 Kg/meter with necessary fittings.& remaking good the demolished portion and primer of anti corrossive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5Page No. 551

558.00

82.00

4g / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 80 mm dia.heavy grade having embossed Meter as ISI Mark galvanised iron pipes weight of 10.15 Kg/meter with necessary fittings. & remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5 Page No. 551

816.00

84.00

4h / 20 BDV 5

Providing & fixing on walls/ ceiling/ floors, Running 100 mm dia.heavy grade having Meter embossed as ISI Mark galvanised iron pipes weight of 14.74 Kg/meter with necessary fittings. & remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats etc. complete. Spec. No.: Bd.V.5 Page No. 551

1085.00

90.00

5a / 20 BDV 5

Providing and laying in trenches 15 mm Running dia. medium grade having embossed as Meter ISI Mark galvanised iron pipes of 1.25 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

204.00

74.00

5b / 20 BDV 5


261.00

74.00

5c / 20 BDV 5

Providing and laying in trenches 25 mm Running dia. medium grade having embossed as Meter ISI Mark galvanised iron pipes of 2.49 kg/meter necessary fitting remaking good

307.00

74.00

the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551 5d / 20 BDV 5

Providing and laying in trenches 32 mm Running dia.medium grade having embossed as Meter ISI Mark galvanised iron pipes of 3.20 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

332.00

74.00

5e / 20 BDV 5


378.00

77.00

5f / 20 BDV 5


478.00

83.00

5g / 20 BDV 5


695.00

83.00

5h / 20 BDV 5


1008.00

90.00

6a / 20 BDV 7

Providing and fixing 15mm diameter water Number meter with non-return valve including

1938.00

159.00

strainer, sockets/ union nut including water meter box making locking arrangement and lock. [Without chamber]. Spec. No.: Bd.V.7 Page No. 554 6b / 20 BDV 7

Providing and fixing 20mm diameter water Number meter with non-return value including strainer, sockets/ union nut including water meter box making locking arrangement and lock. [without chamber] Spec. No.: Bd.V.7 Page No. 554

2717.00

159.00

6c / 20 BDV 7

Providing and fixing 25mm diameter water Number meter with non-returnvalve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. Spec. No.: Bd.V.7 Page No. 554

4302.00

159.00

6d / 20 BDV 7

Providing and fixing 40mm diameter water Number meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Withoutchamber]. Spec. No.: Bd.V.7 Page No. 554

5243.00

159.00

6e / 20 BDV 7

Providing and fixing 50mm diameter water Number 10825.00 meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber] Spec. No.: Bd.V.7 Page No. 554

159.00

6f / 20 BDV 7

Providing and fixing 80mm diameter water Number 12855.00 meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. Spec. No.: Bd.V.7 Page No. 554

173.00

6g / 20 BDV 7

Providing and fixing 100mm diameter Number 17985.00 water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber]. Spec. No.: Bd.V.7 Page No. 554

200.00

7a / 20 BDV 8

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Number

248.00

31.00

Spec. No.: Bd.V.8 Page No. 554 7b / 20 BDV 8

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V.8 Page No. 554

Number

303.00

31.00

7c / 20 BDV 8

Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V.8 Page No. 554

Number

382.00

40.00

8a / 20 BDV 9

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555

Number

254.00

38.00

8b / 20 BDV 9

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555

Number

321.00

38.00

8c / 20 BDV 9

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Spec. No.: Bd.V.9 Page No. 555

Number

398.00

38.00

8d / 20 BDV 9

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555

Number

619.00

38.00

8e / 20 BDV 9

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Spec. No.: Bd.V.9 Page No. 555

Number

694.00

38.00

8f / 20 BDV 9

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete. Spec. No.: Bd.V.9 Page No. 555

Number

749.00

40.00

8g / 20 BDV 9

Providing and fixing screw down for 65 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Number

840.00

42.00

Spec. No.: Bd.V.9 Page No. 555 8h / 20 BDV 9

Providing & fixing screw down for 80 mm. Number dia. wheeled stop tap of brass including necessary sockets/union nut complete. Spec. No.: Bd.V.9 Page No. 555

895.00

47.00

9 / 20 BDV 12

Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. Spec. No.: Bd.V. 12 Page No. 556

Number

201.00

40.00

10a / 20 BDV 14

Providing and fixing 15mm diameter Number concussion push button type brass/gun metal self-closing tap including necessary socket complete. Spec. No.: Bd.V.14 Page No. 557

230.00

59.00

10b / 20 Providing and fixing 25mm diameter Number BDV 14 concussion push button type brass/gun metal self-closing tap including necessary socket complete Spec. No.: Bd.V. 14 Page No. 557

256.00

59.00

11 / 20 BDV 19

Providing and fixing 45 cm wide mild steel Running ladder of 40mm x 6 mm mild steel flat Meter stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm & painting the ladder complete. Spec. No.: Bd. V. 19 Page No. 559

791.00

210.00

12a / 20 BDV 23

Providing and fixing White Glazed Number Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall Spec. No.: Bd.V.23 Page No. 562

6211.00

666.00

12b / 20 Providing and fixing coloured glazed Number BDV 23 earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap brackets for fixing the cistern 32mm dia. P.V.C. flush pipe with fittings and flushing arrangement including lead soil pipe, lead

6753.00

634.00

trap soil pipe connection up to the outside face of the wall. Spec. No.: Bd.V.23 Page No. 562 13a / 20 BDV 26

Number

3087.00

423.00

13b / 20 Providing and fixing coloured glazed Number BDV 26 earthenware lipped flat back/corner type urinal with PVC 5 liters flushing cistern with fittings,capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, P.V.C. flush pipe with fittings including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. Spec. No.: Bd.V.26 Page No. 564

3243.00

423.00

14 / 20 BDV 29

Providing and laying 100 mm dia. half Running round white glazed earthenware pipes in Meter 1:5:10 cement concrete bedding including bends, etc. complete. Spec. No.: Bd.V.29 Page No. 565

150.00

45.00

15A i / 20 BDV 30

Providing and fixing white glazed Number earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

2686.00

625.00

15A ii / 20 BDV 30

Providing and fixing white glazed Number earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

2326.00

622.00

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap & soil pipe connection up to the outside face of wall. Spec. No.: Bd.V.26 Page No. 564

15A iii / 20 BDV 30

Providing and fixing white glazed Number earthenware Wash Hand Basin of 63cm x 45cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

2729.00

622.00

15B i / 20 BDV 30

Providing and fixing coloured glazed Number earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

3000.00

623.00

15B ii / 20 BDV 30

Providing and fixing coloured glazed earthenware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

Number

2871.00

623.00

15B iii / 20 BDV 30

Providing and fixing coloured glazed earthenware Wash Hand Basin of 63 cm x 45 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Spec. No.: Bd.V.30 Page No. 565

Number

3628.00

623.00

16 / 20 BDV 31

Providing and fixing white glazed Number earthenware sink 600mm x 200mm x 450mm including all connection of the G.I. supply and P.V.C. waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. Spec. No.: Bd.V.31 Page No.566

2979.00

690.00

17 / 20 BDV 31

Providing and fixing white glazed earthenware sink 450mm x 200mm x

2672.00

690.00

Number

300mm including all connection of the G.I. supply and lead waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. Spec. No.: Bd.V.31 Page No.566 18a / 20 BDV 32

Providing and fixing 8cm C.I. Nahani Trap Number including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Spec. No.: Bd.V.32 Page No.567

572.00

120.00

18b / 20 Providing and fixing 10cm C.I. Nahani Number BDV 32 Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. Spec. No.: Bd.V.32 Page No.567

770.00

120.00

19 / 20 BDV 37

Providing and laying 100mm diameter half Running round salt glazed stoneware pipes in brick Meter masonry including fittings such as bends, tees, single junction, necessary excavation and jointing complete. Spec. No.: Bd.V.37, Page No. 571

243.00

18.00

20 / 20 BDV 38

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. Spec. No.: Bd.V.38, Page No. 572

Number

1121.00

106.00

21a / 20 BDV 39

Providing and laying 100 mm dia salt Running glazed stoneware pipe including fittings Meter such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. Spec. No.: Bd.V.39, Page No. 573

190.00

61.00

21b / 20 Providing and laying for 150 mm dia salt Running BDV 39 glazed stoneware pipe including fittings Meter Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. Spec. No.: Bd.V.39, Page No. 573

280.00

61.00

21c / 20 BDV 39

Providing & laying for 225mm dia. salt Running glazed S.W. Pipe including fitting such as Meter bends, tees, single junction, double junctions laying, jointing (including excavation & refilling the trenches) complete Spec. No.: Bd.V.39, Page No. 573

352.00

72.00

22a / 20 BDV 41

Providing and laying concrete pipes of I.S.NP. class of 100mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Running Meter

472.00

65.00

22b / 20 Providing and laying concrete pipes of BDV 41 I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Running Meter

482.00

108.00

22c / 20 BDV 41

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Running Meter

531.00

108.00

22d / 20 Providing and laying concrete pipes of BDV 41 I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No.: Bd.V.41, Page No. 573

Running Meter

760.00

108.00

Providing & constructing Brick Masonry Number Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. lid 65 kg with frame fixed in cement concrete etc. complete. Spec. No.: Bd.V.43, Page No. 574

6138.00

808.00

23b / 20 Providing & constructing Brick Masonry Number BDV 43 Inspection Chamber 90cm x 45cm x 90cm

6853.00

1018.00

23a / 20 BDV 43

including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover 75 kg with frame fixed in cement concrete. Spec. No.: Bd.V.43 Page No. 574 24a / 20 BDV 43

Providing & constructing Brick Masonry Number Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete etc. complete with R.C.C. Cover. Spec. No.: Bd.V.43, Page No. 574

4505.00

798.00

24b / 20 Providing & constructing Brick Masonry Number BDV 43 Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover. Spec. No.: Bd.V.43, Page No. 574

5162.00

1068.00

25 / 20 BDV 44

Providing and constructing Brick Masonry Number inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, with C.I. lead cover with frame fixed in cement concrete. Spec. No.: Bd.V.44, Page No. 575

7895.00

1068.00

26 / 20 BDV 44

Providing and constructing Brick Masonry Number inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover. Spec. No.: Bd.V.44, Page No. 575

6203.00

1068.00

27 / 20 BDV 45

Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) Spec. No.: Bd.V.45, Page No. 575

28 / 20 BDV 46

Providing soak pit of size 120cm x 120cm Number x 120cm including excavating and filling with brick-bats. Spec. No.: Bd.V.46, Page No. 576

895.00

531.00

29 / 20 BDV

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete Spec. No.: As directed by Engineer in charge.

Number

637.00

70.00

30a / 20 BDV 60

Providing, laying & fixing P.V.C. pipe of 15mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

42.00

12.00

30b / 20 Providing, laying & fixing P.V.C. pipe of BDV 60 20mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete Spec. No.: As directed by Engineer in charge.

Running Meter

51.00

13.00

30c / 20 BDV 60


Running Meter

69.00

13.00

30d / 20 Providing, laying & fixing P.V.C. pipe of BDV 60 32mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

79.00

13.00

30e / 20 BDV 60

Running Meter

112.00

13.00

Providing, laying & fixing P.V.C. pipe of 40mm dia. with fittings such as bends,

Number 11205.00

806.00

tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No.: As directed by Engineer in charge. 30f / 20 BDV 60


Running Meter

137.00

17.00

30g / 20 Providing, laying & fixing P.V.C. pipe of BDV 60 75mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

198.00

18.00

30h / 20 Providing, laying & fixing P.V.C. pipe of BDV 60 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

281.00

19.00

31 / 20 BDV

Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish-ing, cleaning etc complete. Spec. No.: As directed by Engineer in charge.

Square Meter

718.00

72.00

32 / 20 BDV

Providing and fixing Orissa type white Number glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. Spec. No.: As directed by Engineer in charge.

2582.00

709.00

33 / 20 BDV

Providing and fixing chromium plated Number towal rod 16 mm dia and 75 cm. in length including all accessories complete.

158.00

13.00

Spec. No.: As directed by Engineer in charge. 34 / 20 BDV

Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessories etc. complete. Spec. No.: As directed by Engineer in charge.

Number

409.00

27.00

35 / 20 BDV

Providing and fixing 1st class white Number glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge.

5313.00

824.00

36 / 20 BDV

Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge.

Number

4124.00

633.00

37 / 20 BDV

Providing & fixing orissa type colour Number glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil & vent pipe upto the out side face of wall including 100 mm. dia. C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete. Spec. No.: As directed by Engineer in charge.

5756.00

783.00

38a / 20 BDV

Providing and fixing 40 mm. dia Ball cock Number medium type with PVC float including sockets & necessary fittings and tested as per municipal requirements etc. complete. Spec. No.: As directed by Engineer in charge.

587.00

32.00

38b / 20 Providing and fixing 15 mm. dia Ball cock Number BDV medium type with PVC float including sockets & necessary fittings and tested as per municipal requirement etc. complete. Spec. No.: As directed by Engineer in charge.

201.00

31.00

39i / 20 BDV

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.) i)Tank capacity up to 2,000 liter Spec. No.: As directed by Engineer in charge.

Number

261.00

131.00

39ii / 20 BDV

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.ii) Tank capacity up to 2,001 to 5000 liter Spec. No.: As directed by Engineer in charge.

Number

350.00

147.00

39iii / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.iii) Tank capacity up to 5,001 to 7000 liter Spec. No.: As directed by Engineer in charge.

Number

377.00

147.00

39iv / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.iv) Tank capacity up to 7,001 to 10000 liter Spec. No.: As directed by Engineer in charge.

Number

495.00

164.00

39v / 20 BDV

Number

576.00

212.00

Cleaning elevated water storage Reservoir within a given period, by using

bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.v) Tank capacity upto 10,001 to 15,000 litre Spec. No.: As directed by Engineer in charge. 39vi / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.vi) Tank capacity upto 15,001 to 20,000 litre Spec. No.: As directed by Engineer in charge.

Number

873.00

392.00

39vii / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.vii) Tank capacity upto 20,001 to 30,000 litre Spec. No.: As directed by Engineer in charge.

Number

1342.00

651.00

39viii / 20 BDV

Number

1459.00

732.00

Number

1966.00

1848.00

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.viii) Tank capacity upto 30,001 to 40,000 litre Spec. No.: As directed by Engineer in 39ix / 20 charge. BDV Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster,

bailing out water etc. complete.ix) Tank capacity up to 40,001 to 50000 liter Spec. No.: As directed by Engineer in charge 39x / 20 BDV

1000 Litre

31.00

27.00

39xi / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.xi) Capacity above one lakh upto 4.00 lakh Spec. No.: As directed by Engineer in charge.

1000 Litre

14.00

9.00

39xii / 20 Cleaning elevated water storage BDV Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.xii) Capacity above 4.00 lakh upto 7.00 lakh Spec. No.: As directed by Engineer in charge.

1000 Litre

12.00

8.00

39xiii / 20 BDV

1000 Litre

10.00

6.00

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.x) capacity 50,001 litre to one lakh Spec. No.: As directed by Engineer in charge.

Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m . washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete.xiii) Capacity above 7.00 lakh upto 12.00 lakh Spec. No.: As directed by Engineer in charge.

40a / 20 BDV

Providing and fixing 75 mm dia stabiliser Running pipe/ P.V.C. soil vent/waste pipe and with Meter necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge.

386.00

66.00

40b / 20 Providing and fixing 100 mm dia stabiliser Running BDV pipe/ P.V.C. soil vent/waste pipe and with Meter necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. com-plete. Spec. No.: As directed by Engineer in charge.

572.00

66.00

Litre

9.00

1.00

Litre

8.00

1.00

158.00

75.00

183.00

78.00

41a / 20 BDV

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Spec. No.: As directed by engineer-incharge.

41b / 20 Providing and fixing H.D.P container BDV Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No.: As directed by engineer-incharge. 42a / 20 BDV

Providing and fixing on walls/ ceiling/ floor Running 15 mm dia. CPVC pipe with necessary Meter fittings, remaking good the demolished portion etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

42b / 20 Providing and fixing on walls/ceiling/floor BDV 5 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

Running Meter

42c / 20 BDV 5


216.00

78.00

42d / 20 Providing and fixing on walls/ ceiling/ floor Running BDV 5 32 mm dia. CPVC pipe with necessary Meter fittings, remaking good the demolished portion etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

265.00

78.00

42e / 20 BDV 5

Providing and fixing on walls /ceiling/ floor Running 40 mm dia. CPVC pipe with necessary Meter fittings, remaking good the demolished portion etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

334.00

78.00

42f / 20 BDV 5


501.00

78.00

43a / 20 BDV 5

Providing and laying in trenches 15 mm Running dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

180.00

99.00

43b / 20 Providing and laying in trenches 20 mm Running BDV 5 dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

200.00

99.00

43c / 20 BDV 5

Providing and laying in trenches 25 mm Running dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

232.00

99.00

43d / 20 Providing and laying in trenches 32 mm Running BDV 5 dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc.

302.00

99.00

complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge 43e / 20 BDV 5

Providing and laying in trenches 40mm Running dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

355.00

99.00

43f / 20 BDV 5

Providing and laying in trenches 50mm Running dai. CPVC pipe including necessary Meter excavation, fittings. Refilling trenches etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge

524.00

99.00

44 / 20 BDV 32

Providing and fixing 10 cm PVC nahani trap with grating etc. complete. Spec. No.: BD.V 32 A page 551 and as directed by Engineer in charge

Number

313.00

131.00

45a / 20 BDV

Providing and fixing reinforced cement Number concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) Spec. No.: As directed by Engineer in charge.

2513.00

147.00

45b / 20 Providing and fixing reinforced cement Number BDV concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg) Spec. No.: As directed by Engineer in charge.

1722.00

247.00

46a / 20 BDV

Providing and fixing reinforced cement Number concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 kg) Spec. No.: As directed by Engineer in charge.

2318.00

231.00

46b / 20 Providing and fixing reinforced cement Number BDV concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 kg) Spec. No.: As directed by Engineer in charge.

1332.00

231.00

47a / 20 BDV 4

Providing and making ISI Mark ferrule Number connection of 15 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

745.00

212.00

47b / 20 Providing and making ISI Mark ferrule Number BDV 4 connection of 20 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

1076.00

212.00

47c / 20 BDV 4

Providing and making ISI Mark ferrule Number connection of 25mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

1679.00

212.00

47d / 20 Providing and making ISI Mark ferrule Number BDV 4 connection of 32 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

2637.00

212.00

47e / 20 BDV 4

Providing and making ISI Mark ferrule Number connection of 40mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

3770.00

212.00

47f / 20 BDV 4

Providing and making ISI Mark ferrule Number connection of 50 mm dia. To water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. Spec. No.: Bd.V. 4 page 551

6362.00

212.00

48 / 20 BDV 4

Providing and fixing stainless steel sink of Number size 600 x 510 x 200 mm of Nirali or equivalent make incluidng coupling, outlet pipe, elbow and other necessary fitting,

8342.00

1145.00

finishing etc. complete. Spec. No.: As directed by Engineer in charge 49 / 20 BDV

Providing and fixing C.P. Angular stop Number clock with wall flange jaquar make continental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge

879.00

99.00

50 / 20 BDV

Providing and fixing C.P.Two way BIB cock jaquar make continental (CAT.NO. CON-041) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge

Number

1070.00

99.00

51 / 20 BDV

Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe & wall flange jaquar or equivalent make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge

Number

3696.00

198.00

52 / 20 BDV

Providing and fixing C.P. pillar cock long neck with aerator j jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. Spec. No.: As directed by Engineer in charge

Number

1122.00

99.00

53 / 20 BDV

Providing and fixing C.P. BIB cock with wall flange j jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete Spec. No.: As directed by Engineer in charge

Number

866.00

115.00

54 / 20 BDV

Providing and fixing C.P. sink cock with Number raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etc. complete. Spec. No.: As directed by Engineer in charge

1598.00

99.00

55 / 20 BDV

Providing and fixing P.V.C. Rain water Running pipes of 160mm outer diameter and Meter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. (The contractor shall give 3 yrs guarantee bond for payment) Spec. No.: As directed by Engineer in charge

56 / 20 BDV

Providing and fixing European type wall- Number 12654.00 hung white water closet of Paryware/Hindware with push valve concealed type with cover plate 32mm size of JAQUAR MAKE SERIES FLV1095 including soil pipe ,vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cutting& making good walls, floors etc. complete. Spec. No.: As directed by Engineer Incharge

57 / 20 BDV

Providing and Fixing 110 mm diameter PVC Rain Water pipe with necessary fittings such as bends, tees, single junctions, slotted vent, clamps etc complete Spec. No.: As directed by Engineer Incharge

58 / 20 BDV

Providing and fixing Oval Type Under Number 13013.00 Counter Wash Hand Basin of 16 inch x 22 inch size and of special colour shade having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, including Chromium Plated Coupling Bottle-Trap using Cera Company or equivalent Oval Type Wash

Running Meter

398.00

347.00

66.00

1617.00

66.00

1682.00

basin Model No 3448 as per detailed drawing or as directed by Engineer-InCharge etc. Complete Spec. No.: As directed by Engineer Incharge 59 / 20 BDV 5

Providing and laying in Running walls/ceilings/floors 15 mm dia. medium Meter grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

174.00

56.00

60 / 20 BDV 5

Providing and laying in Running walls/ceilings/floors20 mm dia. medium Meter grade having embossed as ISI Mark galvanised iron pipes of 1.63 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

227.00

75.00

61 / 20 BDV 5

Providing and laying in Running walls/ceilings/floors 25 mm dia.heavy Meter grade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

272.00

56.00

62 / 20 BDV 5

Providing and laying in Running walls/ceilings/floors 32 mm dia. heavy Meter grade having embossed as ISI Mark galvanised iron pipes of 3.20 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

331.00

57.00

63 / 20 BDV 5

Providing and laying in walls/ceilings/floors 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes of 3.68 kg/metre necessary fitting remaking good the demolished portion with filling trenches

374.00

57.00

Running Meter

and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551 64 / 20 BDV 5


473.00

58.00

65 / 20 BDV 5


821.00

59.00

66 / 20 BDV 5


955.00

61.00

67 / 20 BDV 5

Providing and laying in trenches 15 mm Running dia.heavy grade having embossed as ISI Meter Mark galvanised iron pipes of 1.48 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

211.00

79.00

68 / 20 BDV 5

Providing and laying in trenches 20 mm Running dia. heavy grade having embossed as ISI Meter Mark galvanised iron pipes of 1.93 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Spec. No.: Bd.V.5 Page No. 551

274.00

98.00

69 / 20 BDV 5


340.00

98.00

70 / 20 BDV 5


382.00

98.00

71 / 20 BDV 5


431.00

102.00

72 / 20 BDV 5


534.00

106.00

73 / 20 BDV 5


545.00

107.00

74 / 20 BDV 5

Providing and laying in trenches 100 mm Running dia. heavy grade having embossed as ISI Meter Mark galvanised iron pipes of 14.74 kg/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete.

1148.00

118.00

Spec. No.: Bd.V.5 Page No. 551 75 / 20 BDV 23

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.: Specfications

Number

299.00

131.00

76 / 20 BDV 24

Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.: Specfications

Number

355.00

131.00

77 / 20 BDV 21

Providing and fixing European type white Number glazed earthenware water closet pan with UPVC seat and lid with chromiumplated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 literenameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications

4576.00

881.00

78 / 20 BDV 22

Providing and fixing European type white Number glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications

3853.00

881.00

79 / 20 BDV 23

Providing and fixing European type Number Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 liter enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications

4768.00

881.00

80 / 20 BDV 20

Providing and fixing European type Number Colour glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications

4045.00

881.00

81 / 20 BDV 22

Providing and fixing Anglo Indian type Number white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) Spec. No.: Specfications

6385.00

881.00

82 / 20 BDV 23

Providing and fixing high level 10 liter Number capacity with fittings inlet PVC pipe with stop tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow pipe with mosquito proof couplings, galvanised

1384.00

131.00

iron chain and pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged wall and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) Spec. No.: Specfications 83 / 20 BDV 23

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.4985 including making joints with solvent cement etc. complete Spec. No.: Specfications

Number

111.00

5.00

84 / 20 BDV 23

Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete Spec. No.: Specfications

Number

551.00

65.00

85 / 20 Bd-V

Providing , constructing & fixing Supreme Number make or equivalent make Ultra 250 mm dia. Inspection chamber made up of uPVC material of thickness 3.5 mm & height of 259 mm with inlet & outlet of 110 mm dia. with 75 mm dia. U Trap, Ultra shaft pipe of Upvc material having height of 470 mm and fixing Ultra 250 mm dia. uPVC cover & frame in 150 mm thick in c.c.1:2:4, having crushed sand bed of 100 mm thick of size 550 mm dia. Including excavation & refilling the sides of chamber by crushed sand cushioning 150 mm thickness, connecting all required uPVC fittings with rubber lubricant etc. complete. Spec. No.: As Directected By Engineer Incharge

2992.00

261.00

86 / 20 Bd-V

Providing , constructing & fixing Supreme Number make or equivalent make Ultra 450 mm dia. Inspection chamber made up of Polypropylene/polyethylene material of thickness 3.5 mm & height of 388 mm with 160 or 200 mm main inlet (s) outlet & 110 & / or 160 mm branch inlets, with 450 mm dia. Ultra shaft pipe of HDPE material having height of 460 mm, having R.C.C. cover & frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation & refilling the sides of

8254.00

326.00

chamber by sand crushed cushioning 150 mm thickness, connecting all required uPVC fittings with rubber lubricant etc. complete. Spec. No.: As Directected By Engineer Incharge 87 / 20 Bd-V

Providing , constructing & fixing Supreme Number 19646.00 make or equivalent make Ultra 600 mm dia. Inspection chamber made up of Polypropylene/polyethylene material Having 315 mm diameter inlet(s)/outlets & with eccentric reducers as per requirement to connect 160 mm & 200 mm pipes having thickness of 5 mm & 600 mm in height, with inbuilt shaft achieve the invert depth as per site condition of wall thickness of 5 mm having R.C.C. cover & frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation & refilling the sides of chamber by sand crushed cushioning 150 mm thickness, connecting all required uPVC fittings with rubber lubricant etc.complete. Spec. No.: As Directected By Engineer Incharge

326.00

88 / 20 Bd-V

Providing , laying & fixing ,jointing Supreme Eco- drain 110 mm SN 8 NuDrain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. Spec. No.: As Directected By Engineer Incharge

Running Meter

309.00

20.00

89 / 20 Bd-V

Providing , laying & fixing ,jointing Supreme Eco- drain 160 mm SN 4 NuDrain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No.: As Directected By Engineer Incharge

Running Meter

505.00

20.00

90 / 20 Bd-V

Providing , laying & fixing ,jointing Running Supreme Eco- drain 200 mm SN 4 NuMeter Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees tees , coupler etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. Spec. No.: As Directected By Engineer Incharge Note—For item No. 48 to 54 and 56 Prior approval of Superintending Engineer will be necessary

519.00

20.00

Bd-W : Miscellaneous 1a / 21 BDW 2

Square Meter

365.00

97.00

1b / 21 Guniting by dry mix process as per IS BDW 2A 9012 (1978) to ceiling sofit etc. in C.M. 1:3, 25mm thick under pressure of 2.1 kg to 2.8 kg per sq.cm. including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

Square Meter

389.00

120.00

1c / 21 Guniting by dry mix process as per IS BDW 2B 9012 (1978) to ceiling, sofit etc. in c.m. 1:3, 40mm. thick under pressure of 2.1 Kg. to 2.8 Kg. per sq.m. including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement) Spec. No.: Bd.W.2 Page No. 582

Square Meter

477.00

132.00

1d / 21 Guniting by dry mix process as per IS Square BDW 2C 9012(1978) to ceiling, sofit etc. in C.M. Meter 1:3, 50mm. thick under pressure of 2.1 kg to 2.8 kg per sq.cm. including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

588.00

132.00

2a / 21 Guniting by dry mix process as per IS BDW 2D 9012 (1978) to beams in C.M. 1:3, 20 mm. thick under pressure of 2.1 kg to 2.8 kg sq.cm. including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

Square Meter

377.00

91.00

2b / 21 Guniting by dry mix process as per IS BDW 2E 9012 (1978) to beams in C.M. 1:3, 25mm. thick under pressure of 2.1 kg to 2.8 kg per sq.cm. including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement).

Square Meter

422.00

118.00

Guniting by dry mix process as per IS 9012 (1978) to ceiling sofit etc. in C.M. 1:3, 20 mm. thick under pressure of 2.1 kg to 2.8 kg per sq.cm including forms, scaffolding, floating the surface, curing for 14 days etc. complete. (Excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

Spec. No.: Bd.W.2 Page No. 582 3a / 21 Guniting by dry mix process as per I.S. BDW 2K 9012 (1978) to the vertical surface (other than column) in C.M. 1:3, 20 mm. thick under pressure of 2.1 Kg. to 2.8 Kg per sq.cm. including forms, scaffolding, floating, the surface curing for 14 days etc. complete. (excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

Square Meter

350.00

90.00

3b / 21 Guniting by dry mix process as per IS BDW 2L 9012 (1978) to vertical surface (other than column) in C.M. 1:3, 25 mm. thick under pres-sure of 2.1 Kg. to 2.8 Kg. per sq.cm. including forms, scaffold-ing, floating the surface, curing for 14 days etc. complete (excluding reinforcement). Spec. No.: Bd.W.2 Page No. 582

Square Meter

370.00

93.00

4 / 21 BDW 3

Providing and erecting 1.5 metre high Running wire fencing with seven rows of barbed Meter wire supported on M.S.Angles (50 mm x 50 mm x 6mm) at 2.5 Metres, center to center including excavating pits for foundation, fixing post in cement concrete 1:4:8 of size 45 x 45 x 45 cm . fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc. complete. Spec. No.: Bd.W.3 Page No. 583

537.00

63.00

5 / 21 BDW 6

Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150mm.C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement, welding riveting and oil painting of three coats of approved shade. Weight of gate 35 Kg/smt. Spec. No.: Bd.W.6 Page No. 585

Square Meter

1990.00

175.00

6a / 21 BDW 7

Providing and fixing 90 cm. x 60 cm. Marble plate engraving 10cm. height letter, figures including painting the lefters/figures with approved colour and shade complete. Spec. No.: Bd.W.7 Page No. 586

Number

7302.00

155.00

6b / 21 BDW 7

Providing and fixing 90 cm. x 60 cm. Granite plate engraving 10cm. height letter, figures including painting the

Number

8095.00

155.00

lefters/figures with approved colour and shade complete. Spec. No.: Bd.W.7 Page No. 586 7 / 21 Removing double country tiled roof with BDW 8-2 ridge and with battens and stacking the materials as directed with all leads and lifts, complete including removing wood work below. Spec. No.: Bd.W.8 Page No. 587

Square Meter

49.00

49.00

8 / 21 Removing planking from roof or ceiling BDW 8-4 and stacking them as directed with all leads and lifts completed. Spec. No.: Bd.W.8 Page No. 587

Square Meter

22.00

22.00

9a / 21 BDW 85A

Removing Queen Post truss from roof and stacking the materials as directed with all leads and lifts complete. Spec. No.: Bd.W.8 Page No. 587

Number

731.00

731.00

9b / 21 BDW 85B

Removing King Post truss from roof and Number stacking the materials as directed with all leads and lifts complete. Spec. No.: Bd.W.8 Page No. 587

496.00

496.00

10 / 21 BDW 85C

Removing Other type below 5 metres Number span from roof and stacking the materials as directed with all leads and lifts complete. Spec. No.: Bd.W.8 Page No. 587

361.00

361.00

11 / 21 Dismantling flat wooden or A.C. sheet Square BDW 8-8 ceiling with frame work including stacking Meter the materials as directed with all leads, lifts, complete. Spec. No.: Bd.W.8 Page No. 587

24.00

24.00

12 / 21 Removing cloth ceiling including frame BDW 8-9 work and stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Square Meter

10.00

10.00

Cubic Meter

111.00

111.00

Cubic

140.00

140.00

13a / 21 BDW 8

Dismantling brick masonry in Mud and stacking the materials as directed with all leads lifts, complete. Spec. No.: As directed by Engineer in charge.

13b / 21 Dismantling brick masonry in lime or

BDW 8

cement mortar and stacking the materials as directed with all leads, lifts, com-plete. Spec. No.: As directed by Engineer in charge.

Meter

14a / 21 BDW 8

Dismantling stone masonry in mud including stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

114.00

114.00

14b / 21 Dismantling stone masonry in lime or BDW 8 cement including stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

162.00

162.00

15a / 21 BDW 8

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Cubic Meter

237.00

237.00

15b / 21 Removing rich mix cement concrete BDW 8 including stacking the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge

Cubic Meter

399.00

399.00

15c / 21 BDW 8

Cubic Meter

259.00

259.00

15d / 21 Removing doors and windows with BDW 8 frames and stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Number

66.00

66.00

15e / 21 BDW 8

Removing ventilators and small windows with frame and stacking the materials with all leads lifts, complete. Spec. No.: As directed by Engineer in charge.

Number

55.00

55.00

15f / 21 BDW 8

Removing wooden or A.C. partition Square including frame work and stack-ing the Meter materials as with all leads, lifts, complete. Spec. No.: As directed by Engineer in

17.00

17.00

Removing brick bat coba including stacking the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

charge. 15g / 21 Removing teak wood trellies work with Square BDW 8 frame including stacking the materials as Meter directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

14.00

14.00

15h / 21 Removing cement tiles, or marble or BDW 8 polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge

Square Meter

18.00

18.00

15i / 21 BDW 8

Removing Shahabad or Tabdur stones from floor without bed concrete including stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Square Meter

18.00

18.00

16 / 21 BDW 8

Dismantling wooden floor including beams and joists, stacking the materials as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Square Meter

15.00

15.00

17a / 21 BDW 8

Removing cement or lime plaster including disposing of the spoils as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Square Meter

10.00

10.00

Square Meter

7.00

7.00

18 / 21 BDW 8

Removing wire fencing with wooden post Running and stacking the material with all leads, Meter lifts, complete. Spec. No.: As directed by Engineer in charge.

22.00

22.00

19 / 21 BDW 8

Removing wire fencing with iron/C.C. fencing posts and stacking the materials as directed with all leads, lifts complete. Spec. No.: As directed by Engineer in

28.00

28.00

17b / 21 Removing mud plaster including BDW 8 disposing of the spoils as direct-ed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Running Meter

charge. 20 / 21 BDW 8

Removing iron pipe railing having wooden R.C.C. or C.C. or iron posts and stacking the materials as directed. Spec. No.: As directed by Engineer in charge.

Running Meter

29.00

29.00

21 / 21 BDW 8

Removing earthen, stoneware pipes and stacking them as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Number

10.00

10.00

22 / 21 BDW 8

Removing cast iron or wrought iron or A.C. pipe and stacking them as directed with all leads, lifts, complete. Spec. No.: As directed by Engineer in charge.

Running Meter

10.00

10.00

23 / 21 BDW 8

Dismantling the R.C.C. work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed. Spec. No.: As directed by Engineer in charge.

Cubic Meter

614.00

614.00

24a / 21 BDW 8

Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. a) Upto 900mm dia. Spec. No.: As directed by Engineer in charge.

Running Meter

130.00

54.00

24b / 21 Removing Np-2 and Np-3 class pipes BDW 8 including stacking at road side as directed by the Engineer in charge. b) 900mm dia. and above. Spec. No.: As directed by Engineer in charge.

Running Meter

152.00

75.00

25 / 21 BDW 8

Removing single country tiled roof with battens and stacking the materials as directed with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

30.00

30.00

26 / 21 BDW 8

Removing battens from roof and stacking Running them as directed with all leads and lifts Meter etc. complete.

4.00

4.00

Spec. No.: As directed by Engineer in charge. 27 / 21 BDW 8

Removing matting from roof and stacking as directed with all leads and lifts etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

9.00

9.00

28 / 21 BDW 8

Removing purlins from roof including stacking as directed with all leads, lifts, etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

9.00

9.00

29 / 21 BDW 8

Removing rafters from roof including the materials as directed with all leads, lifts, etc. complete. Spec. No.: As directed by Engineer in charge.

Running Meter

9.00

9.00

30 / 21 BDW 8

Removing cloth partition with frame work and stacking the materials as directed with all leads, lifts etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

8.00

8.00

31 / 21 BDW

Providing and fixing Jute Kanthan (Tarat) screen to the scaffold-ing for external guniting as directed including removing the same after the work is over etc complete. Spec. No.: As directed by Engineer in charge

Square Meter

42.00

19.00

32 / 21 BDW

Providing and erecting chain link fencing Running 1.6 M. height with G.I. chain link of size Meter 50 x 50 mm 8 guage thick and fixed 75 mm above Ground level vertical M.S Angle of 40 x 40 x 6 mm size embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M.c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm Angles both sides at every corner or bends embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting

1629.00

139.00

etc. complete. Spec. No.: As directed by Engineer in charge. 33a / 21 BDW

40.00

40.00

Number

88.00

88.00

34 / 21 BDW

Providing and erecting 1.2 meter high Running wire fencing with five rows of barbed Wire Meter supported on mild steel angle(50x50x6mm) post including excavation of pits of foundation concrete fixing the posts in (1:4:8) cement concrete block of 45x45x45 cm and fastening the Wires and painting the angles with one coat with red lead primer and two coats of oil painting etc. complete. Spec. No.: Bd. W. 3, Page No. 583

437.00

46.00

35 / 21 BDW

Providing and fixing rain tattis with bamboos and karve grass with 75 mm thick grass and removing the same after rain is over (size of bamboos 50mm to 75mm. dia and 3 M to 3.5 M. long. Spec. No.: As directed by Engineer in charge.

Square Meter

56.00

26.00

36 / 21 BDW

Providing and fixing grass chhapper Square (roof) with necessary bamboos and karve Meter frame with 75 mm. thick grass etc, removing the same after rain is over (size of bamboos 50 mm to 75 mm dia and 3

74.00

27.00

Removing Urinal Pans or Wash hand Number basin with frame including disconnecting the sanitary and water supply connections. removing the same carefully and stacking the serviceable materials as and where directed including throwing the unserviceable materials out side. Spec. No.: As directed by Engineer in charge.

33b / 21 Removing W.C. Pan including BDW disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed including of throwing the unserviceable materials out side. Spec. No.: As directed by En-gineer in charge.

M to 3.5 M. long.) Spec. No.: As directed by Engineer in charge. 37 / 21 BDW

Providing and fixing grass chhapper Square (roof) with necessary bamboos and karve Meter frame with 75 mm. thick grass etc, removing the same after rain is over (size of bamboos 25 mm dia and 3 M. to 3.5 M. long Spec. No.: As directed by Engineer in charge.

66.00

26.00

38 / 21 BDW

Providing and fixing Bamboo Matting screen for partition with bamboo sticks. Spec. No.: As directed by Engineer in charge.

112.00

57.00

39 / 21 BDW

Providing and fixing lightening conductor Number 15141.00 system comprising of erecting AirTermination consisting of tubular copper rod of 25mm dia. 1.2mm thick with multiple points head 1.2mt. long (Heavy Duty) welded or clamped to G.I. pipe pole B Grade 50mm dia. of required length with M.S. round base plate 25cm. diam. and 10mm thick at bottom embeded in cement concrete 1:3:6 foundation of size 45cm diam. x 45cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pit 1.5 metre below ground level with 40 Kg charcoal and salt with alternate layers of charcoal and salt and G.I. pipe 40mm dia. 2 metrer length burried in earth upto earthling plate remaining portion above ground level for watering and refilling complete. Spec. No.: BDW 1 Page 581 Note – copper strip from lightening conductor is not considered in this item

40 / 21 BDW

Providing and fixing copper strip 25 mm wide and 3 mm thick for lightening conductor including fixing with screws required scaffolding etc. complete. Spec. No.: BDW 1 Page 581 as directed Enginner in charge Note –lightening conductor and earthing pit is not considered in this item

Square Meter

Running Meter

455.00

1907.00

125.00

41 / 21 BDW

Providing and fixing in position Running alluminium strips of size 50 mm. x 3 mm. Meter for nosing the steps including fixing with screws and raval plugs, bending and cutting to the required shape and size, finishing with paint, necessary mortar bedding of 1:3 cement mortar to get exact line and level including watering and curing etc. complete. Spec. No.: As directed by Engineer in charge.

156.00

58.00

42 / 21 BDW

Providing preconstructional antitermite Square treatment as per I.S. 6313 (Part-II) by Meter treating the bottom surface and sides of excavation clorophyriphoas/lendene at the rate of 5 litres of emulsion concentrates of 0.5 percent of Aldrin per square meter of surface area covering 10 years guarantee. Spec. No.: As directed by Engineer in charge.

50.00

13.00

43 / 21 BDW

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 7.5 litres off emulsion concentrate of 0.5 percent of Clorophyriphas/ Hephoclore per square metre of vertical surface are covering 10 years guarantee. Spec. No.: As directed by Engineer in charge.

Square Meter

75.00

13.00

44 / 21 BDW

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent of Hephoclore per square metre of surface area covering ten years guaran-tee. Spec. No.: As directed by Engineer in charge.

Square Meter

50.00

13.00

45 / 21 BDW

Providing preconstructional antitermite Square treatment as per I.S. 6313 (Part-I) to the Meter soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 percent of Clorophysiphas/ 20 E.C. Heptaclor at the rate of 7.5 litres emulsion concentrate per

98.00

13.00

hole and sealing the same with proper filling & covering 10 years guarantee. Spec. No.: As directed by Engineer in charge. 46 / 21 BDW

Providing antitermite treatment to the Number wooden frames of doors/windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a down ward angle of about 45% at the junction of wood work and masonary and injecting 150ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee. Spec. No.: As directed by Engineer in charge.

37.00

13.00

47 / 21 BDW

Providing antitermite treatment to the Number joints of wooden beams/joint used for the roof work of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at a downward angle of about 45% at the junction of wood work and masonary and injecting 80ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee. Spec. No.: As directed by Engineer in charge.

20.00

7.00

48 / 21 BDW

Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee. Spec. No.: As directed by Engineer in charge.

Number

12.00

7.00

49 / 21 BDW

Providing antitermite treatment around Running the periphery of the existing building as Meter per I.S. 6313 (Part-III) by excavating trenches of 20cm width and exposing the sides of columns and plinth beams upto a depth of 300mm and injecting one percent of chlorodane emulsion concentrate at the rate of 2.25 litres per Rmt and refilling the trenches etc.

30.00

7.00

complete covering 2 years guarantee. Spec. No.: As directed by Engineer in charge. 50 / 21 BDW

Providing general pest control services to Square the building to control the nuisance of Meter cockroaches, lizards pin bores and other insects etc. with 4 operations in a year and monthly check up. Spec. No.: As directed by Engineer in charge.

16.00

7.00

51a / 21 BDW

Providing general pest control services to Number small size of inspection chamber to control the nuisance of cockroaches during the year with monthly check up. Spec. No.: As directed by Engineer in charge.

83.00

13.00

51b / 21 Providing general pest control services to Number BDW big size of inspection chamber to control the nuisance of cockroaches during the year with monthly check up. Spec. No.: As directed by Engineer in charge.

179.00

14.00

52 / 21 BDW

Labour charges for removing grass Square thorney shurbs, Jungli shurb Kubabul and Meter alike grass along roadside making the ground clean by showel and phavaras etc. complete. Spec. No.: As directed by Engineer in charge.

12.00

12.00

53 / 21 BDW

Removing grass gazer grass and disposing off out of building premises including making clean the ground by showel and phavaras etc. complete. Spec. No.: As directed by Engineer in charge.

Square Meter

4.00

4.00

54 / 21 BDW

Labour charges for applying two coats of alluminium paint for flag-post including preparing the surface and primer coat etc. complete. Spec. No.: As directed by Engineer in charge.

Number

289.00

289.00

55 / 21 BDW

Providing and fixing crimped wire G.I. mesh of size 20mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing

Square Meter

680.00

135.00

the frame in its original position and oil painting etc. complete. (excluding cost of structural steel) Spec. No.: As directed by Engineer in charge. 56 / 21 BDW

Dismantling existing brick bat coba in the Number W/C and toilets including removing the dismantelled stuff outside the rooms, including stacking and cleaning surface etc. complete. Spec. No.: As directed by Engineer in charge.

895.00

895.00

57 / 21 BDW

Providing and erecting Y type barbed Running wire fencing with seven rows of wire with Meter 2.45 mm dia G.I. pipe ( Rezan/ concentina ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. Spec. No.: As directed by Engineer in charge.

745.00

63.00

58 / 21 BDV

Providing and fixing 40mm diameter and 1.5mm thick Stainless steel railing in S.S.304 Grade including fabricating ,fixtures, errecting , necessary welding , gridening , finishing, buffing to stainless steel pipe etc. complete. Spec. No.: As directed by Engineer Incharge

Running 1938.00 Meter

395.00

59 / 21 BDV

Providing and fixing 900mm high S.S.304 Running 4180.00 Grade Stainless steel railing with 40mm Meter diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete. Spec. No.: As directed by Engineer Incharge

916.00

60 / 21 BDV

Providing and fixing 900mm high S.S.304 Running 3958.00 Grade Stainless steel railing with 40mm Meter diameter and 1.5mm thick at top,40mm

910.00

diameter and 1.5mm thick vertical supports spaced at 3.3m center to center and two pipes of 12mm diameter fixed horizontally including fabricating ,fixtures, errecting , necessary welding , griding , finishing, buffing to stainless steel pipe etc. complete. Spec. No.: As directed by Engineer Incharge Note—For item no. 58 to 60 prior approval of Superintending Engineer will be required

3: CD

: cross dranage works

1 / 22 CD 1

Providing rubble filling of trap/ granite/ quartzite gneiss stones foundations including hand packing filling gravel/ sand in the voids etc complete. Spec. No.: CD.1 Page.No. 159

Cubic Meter

889.00

221.00

2a / 22 CD 3A

Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. With natural sand . Spec. No.: CD.-3 Page.No. 160

Cubic Meter

3629.00

663.00

2b / 22 CD 3A

Providing & laying in situ cement concrete of M 10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work compacting and curing etc. complete. with reversible Drum Type mixer with SCADA. With crushed sand . Spec. No.: CD.-3 Page.No. 160

Cubic Meter

3656.00

663.00

3a / 22 CD 3B

Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary formwork compacting and curing complete. with reversible Drum Type mixer with SCADA. With natural sand. Spec. No.: CD.3 Page.No. 160

Cubic Meter

3490.00

792.00

3b / 22 CD 3B

Providing and laying in situ cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary formwork compacting and curing complete. with reversible Drum Type mixer with SCADA. With crushed sand. Spec. No.: CD.3 Page.No. 160

Cubic Meter

3360.00

792.00

4 / 22 CD 4

Providing trap/ granite/ quartzite/ gneiss Square rubble stone paving 15cm.thick in 1:3 Meter cement mortar over a bedding of 15cm.thick cement concrete of 1:4:8 proportion with trap/ granite/ quartzite/ gneiss metal including striking joints and watering complete. Spec. No.: CD.4 Page.No. 160

1305.00

393.00

5 / 22 CD 6

Providing uncoursed rubble trap/ quartzite/ gneiss stone masonary in cement mortar 1:5 for piers, abutments, wings, returns, head-walls, parapet etc. including striking joints of the non exposed faces and pointing the exposed faces with cement mortar 1:3 including scaffolding and watering masonary complete including bailing out of water. Spec. No.: CD.6 Page.No. 162

3307.00

1163.00

6a / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP-2 class of Meter required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. (a) 450 mm. Dia. Spec. No.: CD.7 Page.No. 162

1319.00

211.00

6b / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP-2 class of Meter required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. (b) 600 mm. Dia. Spec. No.: CD.7 Page.No. 162

1857.00

211.00

6c / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP-2 class of Meter required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. (c) for 800 mm.dia. Spec. No.: CD.7 Page.No. 162

2920.00

209.00

6d / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP-2 class of Meter required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. d) for 900 mm dia. Spec. No.: CD.7 Page.No. 162

3467.00

245.00

6e / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003NP-2 class of Meter required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. e) for 1000 mm dia. Spec. No.: CD.7 Page.No. 162

4014.00

292.00

6f / 22

Providing and laying cement concrete

5659.00

308.00

Cubic Meter

Running

CD 7

pipe of I.S. 458:2003 NP-2 class of required diameter in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. f) for 1200 mm dia. Spec. No.: CD.7 Page.No. 162

7a / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP3 class of Meter required dia. in proper line, level, & slope including providing fixing collars in cement mortar 1:2, curing etc. complete. a) for 600 mm dia. Spec.No.: Spec. No.: CD.7 Page.No. 162

3204.00

345.00

7b / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP3 class of Meter required dia. in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. b) for 800 mm dia. Spec. No.: CD.7 Page.No. 162

5207.00

339.00

7c / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP3 class of Meter required dia. in proper line, level & slope including providing, fixing collars in cement mortar 1:2, curing complete. c) for 900 mm. dia. Spec. No.: CD.7 Page.No. 162

5734.00

348.00

7d / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP3 class of Meter required dia. in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. d) for 1000 mm dia. Spec. No.: CD.7 Page.No. 162

6366.00

370.00

7e / 22 CD 7

Providing and laying cement concrete pipe of I.S. 458:2003 NP3 class of required dia.in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. e) for 1200 mm dia. Spec. No.: CD.7 Page.No. 162

Running Meter

8917.00

406.00

8a / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP4 class of Meter required dia. in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. a)

6994.00

372.00

Meter

for 900 mm dia. Spec. No.: CD 7 Page 167 8b / 22 CD 7

Providing and laying cement concrete Running pipe of I.S. 458:2003 NP4 class of Meter required dia. in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. a) for 1000 mm dia. Spec. No.: CD 7 Page 167

8401.00

372.00

8c / 22 CD 7

Providing and laying cement concrete Running 10457.00 pipe of I.S. 458:2003 NP4 class of Meter required dia. in proper line, level & slope including providing fixing collars in cement mortar 1:2, curing complete. b) for 1200 mm dia. Spec. No.: CD 7 Page 167

372.00

9a / 22 CD 8

Providing cast in situ block of M 10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing complete. with reversible Drum Type mixer with SCADA. (Cement 4.05 bags/Cu.Mt.) With natural sand. Spec. No.: CD 8 Page 163

Cubic Meter

4530.00

1463.00

9b / 22 CD 8

Providing cast in situ block of M 10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing complete. with reversible Drum Type mixer with SCADA. (Cement 4.05 bags/Cu.Mt.) With crushed sand. Spec. No.: CD.8 Page.No. 163

Cubic Meter

4349.00

1396.00

10 / 22 CD 27

Providing selected hard murum filling including laying in layers of 15cm.to 20cm. watering and compacting complete. Spec. No.: CD.14 Page.No. 167

Cubic Meter

467.00

214.00

11a / 22 CD

Providing and laying in situ M.15 cement concrete of trap /granite /quartzite /gneiss metal including compacting, finishing, curing and complete with reversible Drum Type mixer with SCADA. for approach slab (excluding reinforcement.) (Cement 5.90

Cubic Meter

4617.00

786.00

bags/Cu.Mt.) With natural sand. Spec. No.: CD.15 Page.No. 168 and B.7. Page No. 38 11b / 22 Providing and laying in situ M.15 cement CD concrete of trap /granite /quartzite /gneiss metal including compacting, finishing, curing and complete with reversible Drum Type mixer with SCADA. for approach slab (excluding reinforcement.) (Cement 5.90 bags/Cu.Mt.) With crushed sand. Spec. No.: CD.15 Page.No. 168 and B.7. Page No. 38

Cubic Meter

4507.00

786.00

12 / 22 CD 27

Providing & fixing stream lined M-15 Number grade R.C.C. guard stone including mild steel bar reinforcement complete. Spec. No.: CD.20 Page.No. 169

503.00

113.00

13a / 22 CD

Providing cast in situ M-10 grade cement concrete for head walls of C.D. work/ retaining walls etc. including necessary form work, compaction finishing and curing complete. with reversible Drum Type mixer with SCADA. (Cement 4.05 bags/cu.m.) With natural sand Spec. No.: CD 8 Page 163

Cubic Meter

4360.00

838.00

13b / 22 Providing cast in situ M-10 grade CD cement concrete for head walls of C.D. work/ retaining walls etc. including necessary form work, compaction finishing and curing complete. with reversible Drum Type mixer with SCADA. (Cement 4.05 bags/cu.m.) With crushed sand Spec. No.: CD 8 Page 163

Cubic Meter

4588.00

838.00

14a / 22 CD

Providing and casting in situ plain cement concrete M15 grade of trap metal for coping to head walls/ parapet including centering, form work, compaction and curing etc. complete with reversible Drum Type mixer with SCADA. with natural sand Spec. No.: Bd-E-7

Cubic Meter

5024.00

1718.00

14b / 22 Providing and casting in situ plain CD cement concrete M15 of trap metal for coping to head walls/ parapet including

Cubic Meter

5134.00

1718.00

centering, form work, compaction and curing etc. complete with reversible Drum Type mixer with SCADA. with crushed sand Spec. No.: Bd-E-7

4: MORT & H Bituminous Construction 1a / 23 MORTH 201

Cutting down trees including trunks and branches and stacking the materials neatly with a lead of 50m. as directed with girths above 30cm to 60cm. Spec. No.: MORTH 201

Number

423.00

423.00

1b / 23 MORTH 201

Cutting down trees including trunks and branches and stacking the materials neatly with a lead of 50m.as directed with girths. above 60cm to 90 cm. Spec. No.: MORTH 201

Number

563.00

563.00

1c / 23 MORTH 201

Cutting down trees including trunks and branches and stacking the materials neatly with a lead of 50m. as directed with girths. above 90 cm to 180cm. Spec. No.: MORTH 201

Number

1007.00

1007.00

1d / 23 MORTH 201

Cutting down trees including trunks and branches and stacking the materials neatly with a lead of 50m. as directed with girths. above 180cm Spec. No.: MORTH 201

Number

1273.00

1273.00

2a / 23 MORTH 301

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means Spec. No.: MORTH 301

Cubic Meter

113.00

113.00

2b / 23 MORTH 301

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means. Spec. No.: MORTH 301

Cubic Meter

60.00

0.00

3a / 23 MORTH 301

Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Manual Means Spec. No.: MORTH 301

Cubic Meter

122.00

122.00

3b / 23 MORTH 301

Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. By Mechanical Means. Spec. No.: MORTH 301

Cubic Meter

66.00

0.00

4a / 23 MORTH 301

Excavation for roadway in hard murum and boulders including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means Spec. No.: MORTH 301

Cubic Meter

130.00

130.00

4b / 23 MORTH 301

Excavation for roadway in hard murum and boulders including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means. Spec. No.: MORTH 301

Cubic Meter

72.00

0.00

5 / 23 MORTH 301

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. Spec. No.: MORTH 301

Cubic Meter

228.00

228.00

6 / 23 MORTH 301

Excavation for roadway in hard rock by blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials in all lifts upto a lead of 50m. and spreading or stacking as directed. Spec. No.: MORTH 301

Cubic Meter

492.00

388.00

7a / 23 MORTH 301

Excavation for roadway in hard rock by controlled blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stocking as directed. Spec. No.: MORTH 301

Cubic Meter

618.00

472.00

7b / 23 MORTH 301

Excavation for roadway in hard rock by wedging & chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials

Cubic Meter

810.00

748.00

with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Spec. No.: MORTH 301 8 / 23 MORTH 301

Excavation for roadway in Manjara Rock by controlled blasting including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. Spec. No.: MORTH 301

Cubic Meter

977.00

737.00

9 / 23 MORTH 301

Excavation for roadway in laterite rock including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed. Spec. No.: MORTH 301

Cubic Meter

491.00

491.00

10A i / 23 MORTH 301

Excavation for catch / side water gutter in strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Manual Means. Spec. No.: MORTH 301

Cubic Meter

130.00

130.00

10A ii / 23 Excavation for catch / side water gutter in strata MORTH to the specified section including stacking the 309 excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. By Mechanical Means Spec. No.: MORTH 309

Cubic Meter

80.00

6.00

10B i / 23 MORTH 309

Excavation for catch / side water gutter in strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. Hard murum. By Manual Means. Spec. No.: MORTH 309

Cubic Meter

148.00

148.00

10B ii / 23 Excavation for catch / side water gutter in strata MORTH to the specified section including stacking the 309 excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. Hard murum. By Mechanical Means Spec. No.: MORTH 309

Cubic Meter

90.00

12.00

10C i / 23 MORTH 309

Cubic Meter

171.00

171.00

Excavation for catch / side water gutters in strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. Hard murum and boulder. By Manual

Means. Spec. No.: MORTH 309 10C ii / 23 Excavation for catch / side water gutters in MORTH strata to the specified section including stacking 309 the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. Hard murum and boulder. By Mechanical Means. Spec. No.: MORTH 309

Cubic Meter

101.00

0.00

10D i / 23 MORTH 309

Excavation for catch / side water gutter in strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. Soft rock. Spec. No.: MORTH 309

Cubic Meter

285.00

285.00

10E i / 23 MORTH 309

Excavation for catch / side water gutters in strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed. Hard rock. Spec. No.: MORTH 309

Cubic Meter

894.00

810.00

10F i / 23 MORTH 309

Excavation for catch / side water gutters in strata to the specified section including stacking the excavated stuff in a regular bund by chiselling and wedging and disposing of unsuitable or excess stuff as directed. Manjra Rock chiselling and wedging etc. complete Spec. No.: MORTH 309

Cubic Meter

1079.00

985.00

11a / 23 MORTH 305

Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50m, to 95% of standard proctor density after laying them in layers of 20 cm to 30 cm with power roller. Spec. No.: MORTH 305

Cubic Meter

101.00

17.00

11b / 23 MORTH 305

Watering & compacting of embankment formed of materials obtained from the road cutting within a lead of 50 m, to 100% of standard Proctor density after laying them in layers of 20 cm. to 30 cm. with power roller. Spec. No.: MORTH 305

Cubic Meter

137.00

19.00

12a / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. (about 8 inch to 12 inch ) breaking clods, dressing to the required lines, curves, grade and

Cubic Meter

130.00

22.00

section, watering and compaction to 95% of standard proctor density for a lead of 50 to 300 m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305 12b / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to 100% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

132.00

22.00

13a / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to 95% of standard proctor density for a lead of 300m. to 500m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

133.00

22.00

13b / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to 100% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

143.00

24.00

14A i / 23 MORTH 305

Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grade & section, watering and compaction with vibratory roller with V-net attachment to achieve 95 % of standard proctor density complete Spec. No.: MORTH 305

Cubic Meter

230.00

102.00

Cubic Meter

255.00

102.00

14A ii / 23 Providing earth work in embankment with MORTH approved materials obtained from departmental 305 land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the

required lines, curves, grade & section, watering and compaction with Intelligent Soil Compactor with compaction analyzer and V-Net attachment to achieve 95% of standard proctor density complete. By Modern Machinary Spec. No.: MORTH 305 14B i / 23 MORTH 305

Providing earth work in embankment with approved materials obtained from departmental land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grade & section, watering and compaction with vibratory roller with V-net attachment to achieve 100 % of standard proctor density complete Spec. No.: MORTH 305

Cubic Meter

254.00

133.00

14B ii / 23 Providing earth work in embankment with MORTH approved materials obtained from departmental 305 land or other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grade & section, watering and compaction with Intelligent Soil Compactor with compaction analyzer and V-Net attachment to achieve 100% of standard proctor density complete. By Modern Machinary Spec. No.: MORTH 305

Cubic Meter

271.00

133.00

15 / 23 MORTH 305

Providing earth work in embankment with approved materials obtained from Departmental land or other sources including all lifts, laying in layers of 20cm. to 30cm. thickness, breaking clods, dressing to the required lines, curves, grades and section, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment complete. Spec. No.: MORTH 305

Cubic Meter

206.00

125.00

16 / 23 MORTH 305

Preparing embankment with approved materials obtained from the cutting within a lead of 50m. including laying in layers of 20cm to 30cm breaking clods, dressing to the required lines, curves, grade, section, watering and compacting with vibratory roller complete. Spec. No.: MORTH 305

Cubic Meter

40.00

26.00

17a / 23 MORTH 305

Preparing embankment with approved materials obtained from the road cutting including laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades

Cubic Meter

50.00

19.00

and section and compacting with vibratory roller for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305 17b / 23 MORTH 305

Preparing embankment with approved materials obtained from the road cutting including laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section and compacting with Vibratory roller for a lead of over 300m to 500m. inclusive, from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

53.00

16.00

18 / 23 MORTH 305

Laying materials obtained from road cutting in layers, breaking clods, dressing to the required lines, grades and section for embankment within a lead 50 m. Spec. No.: MORTH 305

Cubic Meter

21.00

21.00

19a / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers, breaking clods, dressing to the required lines, curves, grades and section for a lead of over 50m. to 300m. from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

33.00

15.00

19b / 23 MORTH 305

Conveying materials obtained from road cutting including all lifts, laying in layers, breaking clods, dressing to the required lines, curves, grades and section for a lead of over 300m.to 500m from the site of excavation to the site of deposition as directed. Spec. No.: MORTH 305

Cubic Meter

38.00

14.00

20 / 23 MORTH 408

Supplying hard murum/ kankar at the quarry site, including conveying and stacking complete. Spec. No.: MORTH 408

Cubic Meter

172.00

78.00

21 / 23 MORTH 313

Laying 15cm. to 23 cm. trap/ granite/ quartzite/ gneiss rubble soling including hand packing with rubble chips complete excluding cost of material Spec. No.: MORTH 313

Cubic Meter

125.00

77.00

22 / 23 MORTH 408

Spreading hard murum for side width complete Spec. No.: MORTH 408

Cubic Meter

39.00

39.00

23a / 23

Picking the road surface including sectioning

Square

12.00

12.00

MORTH 404

complete (WBM surface.) Spec. No.: MORTH 404

23b / 23 MORTH 501

Picking the road surface including sectioning complete (BT surface.) Spec. No.: MORTH 501

Square Meter

17.00

17.00

24 / 23 MORTH 408

Compacting the hard murum side widths layers on each side with power roller including artificial watering complete. Spec. No.: MORTH 408

Square Meter

5.00

1.00

25A / 23 MORTH 807

Providing and fixing trap/ granite/ quartzite/ gneiss guard stone/ indicator stones/ boundary stones of standard size and shape including fixing in block of standard size of cement concrete 1:4:8 white washing etc.complete Spec. No.: MORTH 807

Number

495.00

110.00

25B / 23 MORTH 807

Providing and fixing trap /granite/ quartzite/ gneiss/ guard stone/ indicator stones/ boundry stones of standard size & shape including fixing In ground and white washing complete Spec. No.: MORTH 807

Number

162.00

81.00

26 / 23 MORTH 807

Providing and fixing M-15 R.C.C. guard stone/ indicator stones/ boundary stones of standard size and shape including fixing in C.C. 1:4:8 and white washing etc. complete. Spec. No.: MORTH 807

Number

501.00

89.00

27 / 23 MORTH 306

Providing dry rubble stone pitching 23cm. (about 9 inch) thick. Spec. No.: MORTH 306

Square Meter

225.00

125.00

28 / 23 MORTH 2206

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone masonry. Spec. No.: MORTH 2206

Cubic Meter

964.00

352.00

29 / 23 MORTH 807

Providing & fixing R.C.C.1:2:4 boundary stones as per type design including painting numbering, fixing in standard size C.C.1:4:8 block complete. Spec. No.: MORTH 807

Number

632.00

79.00

30 / 23 MORTH 805

Providing and fixing R.C.C. 200 metre stones as per I.R.C. standard including fixing in standard size C.C.1:4:8 block curing complete painting lettering etc. complete. Spec. No.: MORTH 805

Number

598.00

166.00

Meter

31 / 23 MORTH 805

Providing and fixing R.C.C. 5th Km. stones, on N.H./ S.H./ M.D.R. etc. including painting, numbering etc complete as per IRC design for highway km. stones and fixing in std. size c.c. 1:4:8 block complete. Spec. No.: MORTH 805

Number

2621.00

287.00

32 / 23 MORTH 805

Providing & fixing R.C.C. 1:2:4 ordinary km. stones including painting numbering etc. complete for N.H./ S.H./ M.D.R. etc. as per IRC design for highway km stone and fixing in standard size C.C. 1:4:8 block complete. Spec. No.: MORTH 805

Number

2136.00

252.00

33 / 23 MORTH 805

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. Spec. No.: MORTH 805

Number

12.00

12.00

34 / 23 MORTH 404

Brooming the W.B.M. surface by wire Brushes, coir brushers, dusting, cleaning etc. for receiving the bituminous treatment complete. Brooming the water Bound Macadam surface by wire. Spec. No.: MORTH 404

Square Meter

7.00

7.00

35 / 23 MORTH 100

Painting and numbering trees with white background and black lettering complete. Spec. No.: MORTH 100

Number

10.00

10.00

36A / 23 MORTH 801

Providing and fixing cautionary / warning sign board of size 90 cm. having shape of equilateral triangle with apex point upwards. Prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc. complete. Spec. No.: MORTH 801 I.R.C. : 67-1977

Number

2537.00

485.00

36B / 23 MORTH 801

Providing and fixing cautionary / warning sign board of size 60 cm. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc.complete Spec. No.: MORTH 801 I.R.C. : 67-1977

Number

2089.00

485.00

37 / 23 MORTH 801

Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 cm. dia. prepared on 16 gauge M.S. sheet including painting with zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border, coated with non pealable crystal clear protective transparent coat retaining 100% relection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size etc. complete. Spec. No.: MORTH 801 I.R.C. : 67-1977

Number

2172.00

485.00

38 / 23 MORTH 801

Providing and fixing N.H./ S.H. Route Marker size 60 cm x 45 cm with one No. direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S. sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade,

Number

2555.00

485.00

border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos. of high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977 39 / 23 MORTH 801

Providing and fixing Road junction / Information sign board of size 1.20 m x 0.75 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-incharge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977

Number

5316.00

485.00

40 / 23 MORTH 801

Providing and fixing Road junction / Information sign board of size 1.8 m x 1.2 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 65 x 65 x 6 mm of 3.65 m. long inflated at bottom drilled on top with two Nos. angle iron

Number

11362.00

485.00

cross bracing for vertical angle post of size 50 x 50 x 5 mm of 2.35 mtr. long painted in white and black bands of 30 cm. with 8 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977 41 / 23 MORTH 801

Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 25 x 25 x 3 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Spec. No.: MORTH 801 I.R.C.: 67-1977

Number

3985.00

485.00

42 / 23 MORTH 801

Fixing in position Cautionary/ Mandatory sign boards in ground with C C 1:4:8 block of 60cm x 60cm x 75cm size etc. complete as directed including all leads. Spec. No.: MORTH 801

Number

569.00

113.00

43 / 23 MORTH 801

Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete. Spec. No.: MORTH 801

Number

956.00

158.00

44A / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for cautionary/ mandatory sign boards and village name boards complete. Spec. No.: MORTH 801

Number

64.00

28.00

44B / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for informatory sign boards complete. Spec. No.: MORTH 801

Number

65.00

30.00

44C / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering on masonry works with nalla flow direction, span number and location complete. Spec. No.: MORTH 801

Number

10.00

4.00

44D / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for fifth k.m. stone complete. Spec. No.: MORTH 801

Number

256.00

83.00

44E / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for ordinary kilometre stone complete. Spec. No.: MORTH 801

Number

201.00

76.00

44F / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for two hundred metre stone complete. Spec. No.: MORTH 801

Number

61.00

18.00

44G / 23 MORTH 801

Painting with approved enamel paint in two coats including cleaning surface and lettering for boundary stones complete. Spec. No.: MORTH 801

Number

20.00

9.00

45 / 23 MORTH 100

Providing white & colour washing to road side trees in 2 coats in 2 bands of white and one red band at centre of 30 cm height each including preparing the surface, cost of material, conveying etc. complete. Spec. No.: MORTH 100

Number

11.00

7.00

46 / 23 MORTH 400

Labour for breaking trap stone rubble (Rawali) into metal of suitable size conveying by head load feeding crusher, stacking the chips, refeeding the crusher with oversize metal to obtain chips of 20mm size and below including labour for machinery (Measurements shall be on stacked screened chips only) Spec. No.: MORTH 400

Cubic Meter

145.00

145.00

47 / 23 MORTH 400

Labour for breaking available metal including conveying by head load, feeding crusher, stacking the chips, refeeding the crusher with oversize metal to obtain chips of 20 mm size

Cubic Meter

72.00

72.00

and below including labour for machinery (Measurements shall be on stacked screened chips only) Spec. No.: MORTH 400 48 / 23 MORTH 409

Providing and casting in situ or precast tapering R.C.C. 1:1 1/2:3 Kerbs type-I as per Drg. No. 13 dt. 20-4-79, 30mm wide tapering 225 mm to 150 mm embedded 25mm below ground level finished neatly with C.M. 1:2, setting the same in C.M. 1:2, painting exposed surface of the kerbs with 2 coats of road marking paint of approved quality and colour including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed. Spec. No.: MORTH 409

Running Meter

437.00

99.00

49A / 23 MORTH 409

Providing and casting in situ or precast tapering R.C.C. 1:2:4 Kerbs type-II as per Drg. No. 13 dt. 20-4-79, tapering (9 inch x 6 inch) both side embedded 6 inch below ground level finished neatly with C.M. 1:2 with 4 Nos. 6mm and bars 6mm and strips at 18 inch C/c setting the same in C.M. 1:2, painting the exposed surface of the kerbs with 2 coats of road marking paint of approved quality and colour including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed for single line dividers. Spec. No.: MORTH 409

Running Meter

514.00

105.00

49B / 23 MORTH 409

Providing and casting in situ or precast tapering R.C.C. 1:2:4 Kerbs type-III as per Drg. No. 13 dt. 20-4-79, tapering (9 inch x 6 inch ) both side embedded 6 inch below ground level finished neatly with C.M. 1:2 with 4 Nos. 6mm dia. bars and 6mm dia. strips at 18 inch C/c setting the same in C.M. 1:2, painting the exposed surface of the kerbs with 2 coats of road marking paint of approved quality and colour including the required excavated stuff any where in city and redoing the surface as specified and directed for single line dividers. Spec. No.: MORTH 409

Running Meter

669.00

139.00

50 / 23 MORTH 409

Providing and casting in situ or precast rectangular R.C.C. 1:1 1/2:3 studs type-IV as per Drg. No. 13 dt. 20-4-79, (9 inch x 12 inch ) in size and embedded 4 inch below ground level finished neatly with C.M. 1:2 setting the same in C.M. 1:2, painting the exposed surface kerbs

Running Meter

348.00

89.00

with 2 coats of road marking paint of approved quality and colour including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed. Spec. No.: MORTH 409 51 / 23 MORTH 2703

Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 50mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 125 x 65 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. Spec. No.: MORTH 2703

Running Meter

1903.00

168.00

52 / 23 MORTH 2703

Providing and fixing in position Guard Railing as per Drg. No. 15 Type C dt. 20-4-79, with 3 rows of 40mm dia. G.I. pipe 30cm a part and fixed in M.S. channels of section 100 x 50 x 6 mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30 x 30cm. as per detailed drawing, with 3 coats of approved of yellow and black paint including necessary excavation in any strata. Spec. No.: MORTH 2703

Running Meter

1826.00

216.00

53 / 23 MORTH 2703

Providing and fixing Guard Railing of 1000mm height as per Type D Drg. No. 15 dt. 20-4-79, and fixed in 40 x 40 x 6mm iron, angle embedded in 1:2:4 cement concrete bedding patti as per detailed drawing, with 3 coats of approved of yellow and black paint. Spec. No.: MORTH 2703

Running Meter

1776.00

180.00

54 / 23 MORTH 2703

Providing and fixing Guard Railing of 1000 mm height in 25mm M.S. square bars 100 mm C/c. as per Type drawing No. 6 dt. 20-8- 85 and fixed in 50mm x 50mm x 6mm iron angle embedded in 1:2:4 C.C. bedding 55 x 45 cm and 50 x 6 iron patti as per de-tailed drawing with 3 coats of approved yellow and black paint. Spec. No.: MORTH 2703

Running Meter

1753.00

265.00

55 / 23 MORTH 806

Supplying precast conventional reflective delinators on four sides for road signs Spec. No.: MORTH 806

Number

318.00

65.00

56 / 23 MORTH 806

Providing and fixing including conveyance charges upto a distance of 200 Km. precast concrete post delinators, post of size 130 x 90 x 1300 milimetre consisting of 4 B.T. wires with

Number

426.00

105.00

14,000 Kg/cm2 C.C. M-20 grade 16mm dia. hold fast, includ-ing excavation & C.C. 1:4:8 foundation block, oil painting post with 3 coats and Red fluorescent tape 75 x 75mm and white floursent border 20mm wide around the red tape on all the four sides with necessary adhesive and lamination etc. complete. Spec. No.: MORTH 806 57A / 23 MORTH 801

Providing and fixing sign boards of size 90cm having shape of an equilators triangle made out of 14 guage sheet with retro reflective sheeting of high intensity grade as per M.O.T. specification No. 801-3(1993) white reflective back ground, lettering symbol bordering of black non reflective paint including 3.45 metre long M.S. angle one post of 50mm x 50mm x 5mm size duly painted with white and black bands including fixing the boards of M.S. angle with galvanised nuts and bolts and washer. The Board shall be as per IRC-67-1977 including conveying fixing in ground with C.C. 1:4:8 block of size 0.45 x 0.45 x 0.45 m, with 7 year guarantee for the sheeting etc. complete. A) Alluminium Board Spec. No.: MORTH 801 IRC-67:1977 and As directed by Engineer in charge

Number

5182.00

485.00

57B / 23 MORTH 801

Providing and fixing sign boards of size 90cm having shape of an equilateral triangle made out of 14 gauge sheet with retro reflective sheeting of high intensity grade as per M.O.T. specification No. 801-3(1993) white reflective back ground, lettering symbol bordering of black non reflective paint including 3.45 metre long M.S. angle one post of 50mm x 50mm x 5mm size duly painted with white and black bands including fixing the boards of M.S. angle with galvanised nuts and bolts and washer. The Board shall be as per IRC-67-1977 including conveying fixing in ground with C.C. 1:4:8 block of size 0.45 x 0.45 x 0.45 m, with 7 year guarantee for the sheeting etc. complete. B) Mild Steel Board / Vitrous Enamelled Spec. No.: MORTH 801 IRC-67:1977 and As directed by Engineer in charge

Number

3691.00

485.00

58 / 23 MORTH 801

Providing and fixing sign boards of 1.80m x 1.20m size or other suitable similar size made out of 14 guage Alluminium sheet with retro reflective sheeting of high intensity grade as per M.O.T. specification No. 801-3 (1993) with white reflective back ground lettering symbol figuring

Square Meter

14194.00

485.00

bordering of black non reflective paint including 3.45m long M.S. angle two posts 50mm x 50mm x 5mm size duly painted with white and black bands with bracing of vertical post of bottom of board with 50mm x 50mm x 5mm size M.S. angle including fixing the boards of M.S. angle frame with galvanised nuts, bolts & washers as per I.R.C. 67. 1977 including conveying fixing in ground with cement concrete 1:4:8 block of size 0.45 x 0.45 x 0.45 m.with 7 years guarantee for sheeting etc. complete Spec. No.: IRC-67:1977 and As directed by Engineer in charge. 59 / 23 MORTH 801

Providing and fixing reflective fluorescent tape on old road sign including cleaning / scraping the existing board complete Spec. No.: As directed by Engineer in charge.

Square Centimeter

1.00

0.25

60 / 23 MORTH

Design of overlay for existing B.T. surface with carrying out testing by Benkelman Beam method as per guide lines in IRC 81:1997 including design & testing at site. The charges for transportation of Benkelman Beam, loaded truck labour for testing and traffic control are not included. Spec. No.: As directed by Engineer in charge.

Kilometer

6750.00

0.00

60 a/ 23 MORTH

Carrying out roughness index/ road unevenness Kilometer test with car mounted/ Jeep towed ARUR machine (Automatic Road Unevenness Recorder ) calibrated from C.R.R.I. New Delhi (Central Road Research institute) or any other equivalent authority including taking observations, feeding data and giving computerised test results including hire charges of all machinery and labour etc. complete. i) Road surface Single lane ( B.T/W.B.M.) 3.75 m. width Spec. No.: As directed by Engineer in charge. Kilometer

410.00

40.00

820.00

70.00

410.00

40.00

60 b/ 23 MORTH

60 c / 23 MORTH

Carrying out roughness index/ road unevenness test with car mounted/ Jeep towed ARUR machine (Automatic Road Unevenness Recorder ) calibrated from C.R.R.I. New Delhi (Central Road Research institute) or any other equivalent authority including taking observations, feeding data and giving computerised test results including hire charges of all machinery and labour etc. complete. i) Road surface Single lane ( B.T/W.B.M.) 5.50 Kilometer m.to 7.00 width Spec. No.: As directed by Engineer in charge.

60 c / 23 MORTH

Carrying out roughness index/ road unevenness test with car mounted/ Jeep towed ARUR machine (Automatic Road Unevenness Recorder ) calibrated from C.R.R.I. New Delhi (Central Road Research institute) or any other equivalent authority including taking observations, feeding data and giving computerised test results including hire charges Kilometer of all machinery and labour etc. complete. i) Road surface Single lane ( B.T/W.B.M.) 5.50 m.to 7.00 width Spec. No.: As directed by Engineer in charge.

15.00

1.00

Dead Journey charges for Transportation of machine/ vehicle etc. complete 61A i / 23 MORTH 801

Providing and fixing with apex point upward prepared on fibre reinforced plate 3.0 milimeter thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/ heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, one M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbers of strong G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) a) i) Cautionary sign boards 90 cm equilateral trinlgle. Spec. No.: MORTH 801 IRC 57 of 2001

Number

7329.00

1200.00

61A ii / 23 Providing and fixing with apex point upward MORTH prepared on fibre reinforced plate 3.0 milimeter 801 thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, opne M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbers of strong G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) a)i) Cautionary sign boards 90 cm equilateral trinlgle. High intensity grade

Number

8792.00

1265.00

Spec. No.: MORTH 801 IRC 57 of 2001 61B i / 23 MORTH 801

Providing and fixing with apex point upward prepared on fibre reinforced plate 3.0 milimeter thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, one M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbers of strong G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) b) i) Informatory sign boards of size 60 x 80 cm Spec. No.: MORTH 801 IRC 57 of 2001

Number

9524.00

1310.00

61B ii / 23 Providing and fixing with apex point upward MORTH prepared on fibre reinforced plate 3.0 milimeter 801 thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, one M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbers of strong G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) b) ) i) Informatory sign boards of size 60 x 80 cm High intensity grade. Spec. No.: MORTH 801 IRC 57 of 2001

Number

11215.00

1425.00

61C i / 23 MORTH 801

Number

6234.00

1080.00

Providing and fixing with apex point upward prepared on fibre reinforced plate 3.0 milimeter thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, one M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbers of strongg

G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) c) i) Prohibitory sign boards having size 60 cm circular Spec. No.: MORTH 801 IRC 57 of 2001 61C ii / 23 Providing and fixing with apex point upward MORTH prepared on fibre reinforced plate 3.0 milimeter 801 thick bonded with white retroreflective sheeting on Engineering grade having pressure sensitive/heat activated adhesive retoreflective white back ground and red border and back side gray retoreflctive symbols, letters, numerals, arrows, one M.S. angle post of 65 x 65 x 6 milimetre size and 3.65 metre long inflated bottom and drilled on top and painting posts with white and black border of 25 centimetres, fitting board to post with 2 numbes of strong G.I. bolts and nuts including transportation and fixing in p.c.c.1:4:8 etc. complete. ( The work to be executed with prior approval of Superintending Engineer) c) i) Prohibitory sign boards having size 60 cm circular High intensity grade. Spec. No.: MORTH 801 IRC 57 of 2001

Number

7297.00

1165.00

62i a / 23 MORTH 801

Providing and fixing road junction/information sign boards of size 1.20 x 0.90 Meter Prepared fiber reinforced plate 4.0 millimeter thick on frame of 40 x 40 mm angle with support of 40 mm M.S. Patti of 6.00 mm thick for strengthening including bonded retro reflective sheeting of Engineering grade having pressure sensitive/heat activated adhesive retro reflective with as per directed colour with retro reflective symbols, letter, numbers, arrows with two M.S angle post of 65 x 65 x 6 mm size and 3.65 meter long in one piece without joint inflow at bottom and filled on top with tracing of 40 x 40 x 5 mm M.S. angle and painting with white and black border of 25 mm, fixing boards on post with including transportation fixing in 1:4:8 cement concrete block of 60 x 60 x 75 cm size at site and complete. (The work to be executed with prior approval of Superintending Engineer). Spec. No.: MORTH 801 IRC 67 of 2001

Number

17801.00

2030.00

62i b / 23 MORTH 801

Providing and fixing road junction/information sign boards of size 1.20 x 0.90 Meter High Intensity grade Prepared fiber reinforced plate 4.0 millimeter thick on frame of 40 x 40 mm angle with support of 40 mm M.S. Patti of 6.00

Number

20342.00

2280.00

mm thick for strengthening including bonded retro reflective sheeting of Engineering grade having pressure sensitive/heat activated adhesive retro reflective with as per directed colour with retro reflective symbols, letter, numbers, arrows with two M.S angle post of 65 x 65 x 6 mm size and 3.65 meter long in one piece without joint inflow at bottom and filled on top with tracing of 40 x 40 x 5 mm M.S. angle and painting with white and black border of 25 mm, fixing boards on post with including transportation fixing in 1:4:8 cement concrete block of 60 x 60 x 75 cm size at site and complete. (The work to be executed with prior approval of Superintending Engineer). Spec. No.: MORTH 801 IRC 67 of 2001 62ii a / 23 MORTH 801

Providing and fixing road junction/information sign boards of size 1.80 x 0.90 Meter Prepared fiber reinforced plate 4.0 millimeter thick on frame of 40 x 40 mm angle with support of 40 mm M.S. Patti of 6.00 mm thick for strengthening including bonded retro reflective sheeting of Engineering grade having pressure sensitive/heat activated adhesive retro reflective with as per directed colour with retro reflective symbols, letter, numbers, arrows with two M.S angle post of 65 x 65 x 6 mm size and 3.65 meter long in one piece without joint inflow at bottom and filled on top with tracing of 40 x 40 x 5 mm M.S. angle and painting with white and black border of 25 mm, fixing boards on post with including transportation fixing in 1:4:8 cement concrete block of 60 x 60 x 75 cm size at site and complete. (The work to be executed with prior approval of Superintending Engineer). Spec. No.: MORTH 801 IRC 67 of 2001

62ii b / 23 Providing and fixing road junction/information MORTH sign boards of size 1.80 x 0.90 Meter High 801 Intensity grade Prepared fiber reinforced plate 4.0 millimeter thick on frame of 40 x 40 mm angle with support of 40 mm M.S. Patti of 6.00 mm thick for strengthening including bonded retro reflective sheeting of Engineering grade having pressure sensitive/heat activated adhesive retro reflective with as per directed colour with retro reflective symbols, letter, numbers, arrows with two M.S angle post of 65 x 65 x 6 mm size and 3.65 meter long in one piece without joint inflow at bottom and filled on top with tracing of 40 x 40 x 5 mm M.S. angle and painting with white and black border of 25

Number

38045.00

3490.00

Number

44820.00

3865.00

mm, fixing boards on post with including transportation fixing in 1:4:8 cement concrete block of 60 x 60 x 75 cm size at site and complete. (The work to be executed with prior approval of Superintending Engineer). Spec. No.: MORTH 801 IRC 67 of 2001 63a / 23 MORTH 700

Providing and laying a woven Polypropylene Geotextile of Techfab India TFI - 5300 Type-I manufactured from black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator cum reinforcement with necessary overlap as per drawing Spec. No.: MORTH 700

Square Meter

135.00

26.00

63b / 23 MORTH 701

Providing and laying a woven Polypropylene Geotextile of Techfab India TFI - 5200 Type-II manufactured from black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator cum reinforcement with necessary overlap as per drawing Spec. No.: MORTH 701

Square Meter

124.00

24.00

63c / 23 MORTH 701

Providing and laying a woven Polypropylene Geotextile of Techfab India TFI - 5100 Type-III manufactured from black UV stabilised Polypropylene Tape yarn on the prepared subgrade as the separator cum reinforcement with necessary overlap as per drawing Spec. No.: MORTH 701

Square Meter

112.00

22.00

64a / 23 MORTH 701

Providing and laying a fibre glass geogrid of Tech fab India Type-50 manufactured from high quality glass fibre strands and coated with a polymer modified bitumen as reinforcement to Asphalt overlay flexible pavements and Asphalt over distressed rigid P.C.C. Spec. No.: MORTH 701

Square Meter

136.00

27.00

64b / 23 MORTH 701

Providing and laying a fibre glass geogrid of Tech fab India Type-100 manufactured from high quality glass fibre strands and coated with a polymer modified bitumen as reinforcement to Asphalt overlay flexible pavements and Asphalt over distressed rigid P.C.C. Spec. No.: MORTH 701

Square Meter

221.00

48.00

65a / 23 MORTH 2500

Providing and Constructing gabion structure of required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to BS: 443 having zinc plus PVC coating of overall diameter of 3.7 mm having mesh of size 10 x 12

Number

2214.00

618.00

cm or less with edge wire confirming to BS 443 of overall diameter 4.4 mm edges being mechanically selvedge including placing in position, filling neatly with rubble all loose ends to be securely tied etc. complete. (Size 1M x 1M x 1M ). Spec. No.: MORTH 2500 65b / 23 MORTH 2500

Providing and Constructing gabion structure of required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to BS: 443 having zinc plus PVC coating of overall diameter of 3.7 mm having mesh of size 10 x 12 cm or less with edge wire confirming to BS 443 of overall diameter 4.4 mm edges being mechanically selvedge including placing in position, filling neatly with rubble all loose ends to be securely tied etc. complete. (Size 1M x 1M x 2M ). Spec. No.: MORTH 2500

Number

3899.00

1080.00

65c / 23 MORTH 2500

Providing and Constructing gabion structure of required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to BS: 443 having zinc plus PVC coating of overall diameter of 3.7 mm having mesh of size 10 x 12 cm or less with edge wire confirming to BS 443 of overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with rubble all loose ends to be securely tied etc. complete. (Size 1M x 1M x 3M ). Spec. No.: MORTH 2500

Number

5886.00

1780.00

66a / 23 MORTH 700

Providing and laying Tech fab India CE marked Needle Punched and mechanically bonded non woven Geotextile indigenously manufactured from high quality poly Propylene staple fibers (continuous filament will not be accepted ) on the prepared subgrade for Seperation.TFITECHGO = PR-15 Spec. No.: MORTH 700

Square Meter

106.00

20.00

66b / 23 MORTH 700

Providing and laying Tech fab India CE marked Needle Punched and mechanically bonded non woven Geotextile indigenously manufactured from high quality poly Propylene staple fibers(continuous filament will not be accepted ) on the prepared subgrade for Seperation.TFITECHGO = PR-20 Spec. No.: MORTH 700

Square Meter

121.00

22.00

66c / 23 MORTH 700

Providing and laying Techfab India CE marked Needle Punched and mechanically bonded non woven Geotextile indigenously manufactured from high quality poly Propylene staple fibers(continuous filament will not be accepted ) on the prepared subgrade for Seperation.TFITECHGO = PR-25 Spec. No.: MORTH 700

Square Meter

134.00

25.00

67a i / 23 MORTH 202

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. By Manual Means -Bituminous Course Spec. No.: M.O.R.T & H - 202

Cubic Meter

669.00

452.00

67a ii / 23 MORTH 202

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. By Manual Means -Granular Course Spec. No.: M.O.R.T & H - 202

Cubic Meter

481.00

302.00

67b / 23 MORTH 202

Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. By Mechanical Means Spec. No.: M.O.R.T & H - 202

Cubic Meter

279.00

93.00

68 / 23 MORTH 202

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately Spec. No.: M.O.R.T & H - 202

Cubic Meter

1743.00

314.00

69a / 23 MORTH 202

Dismantling of kilometre stone including cutting of earth, foundation and disposal of dismantled material with all lifts and lead upto 1000 m and back filling of pit. 5th KM Stone Spec. No.: M.O.R.T & H - 202

Number

351.00

257.00

69b / 23 MORTH 202

Dismantling of kilometre stone including cutting of earth, foundation and disposal of dismantled material with all lifts and lead upto 1000 m and back filling of pit. Ordinary KM Stone Spec. No.: M.O.R.T & H - 202

Number

210.00

151.00

69c / 23 MORTH

Dismantling of kilometre stone including cutting of earth, foundation and disposal of dismantled

Number

42.00

31.00

202

material with all lifts and lead upto 1000 m and back filling of pit. Hectometer Stone Spec. No.: M.O.R.T & H - 202

70 / 23 MORTH 202

Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately Spec. No.: M.O.R.T & H - 202

Number

156.00

121.00

71 / 23 MORTH 303

Carrying out excavation in hard rock to achieve a specified slope of the rock face by controlled use of explosives and blasting accessories in properly aligned and spaced drill holes, collection of the excavated rock by a 80 HP dozer, loading in tipper by a front end loader and disposing of the material with all lifts and lead upto 1000 m, all as specified in clause No. 303 Spec. No.: M.O.R.T & H - 303

Square Meter

123.00

11.00

72a / 23 MORTH 305

Scarifying the existing granular road surface to a depth of 50 mm by manual means and disposal of scarified material within all lifts and leads upto 1000 metres. Spec. No.: M.O.R.T & H - 305.4.3

Square Meter

24.00

14.00

72b / 23 MORTH 305

Scarifying the existing bituminous road surface to a depth of 50 mm by manual means and disposal of scarified material with in all lifts and lead upto 1000 metres. Spec. No.: M.O.R.T & H - 305.4.3

Square Meter

6.00

1.00

73a i / 23 MORTH 401

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 -Plant Mix Method and Grading - I Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

1074.00

13.00

73a ii / 23 MORTH 401

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the

Cubic Meter

1121.00

13.00

desired density, complete as per clause 401 -Plant Mix Method and Grading - II Material Spec. No.: M.O.R.T & H - 401 73a iii / 23 Construction of granular sub-base by providing MORTH close graded Material, mixing in a mechanical 401 mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401-Plant Mix Method and Grading - III Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

1198.00

13.00

73b i / 23 MORTH 401

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - I Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

776.00

12.00

73b ii / 23 Construction of granular sub-base by providing MORTH close graded material, spreading in uniform 401 layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

811.00

12.00

73b iii / 23 Construction of granular sub-base by providing MORTH close graded material, spreading in uniform 401 layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - III Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

943.00

12.00

74i / 23 MORTH 401

Cubic Meter

912.00

11.00

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading - IV Material Spec. No.: M.O.R.T & H - 401

74ii / 23 MORTH 401

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading - V Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

903.00

11.00

74iii / 23 MORTH 401

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. Grading - VI Material Spec. No.: M.O.R.T & H - 401

Cubic Meter

876.00

11.00

75a / 23 MORTH 401

Laying and spreading available soil in the subgrade on a prepared surface,pulverizing, mixing the spread soil in place with rotavator with 3 per cent slaked lime having minimum content of 70 per cent of CaO, grading with motor grader and compacting with the road roller at OMC to the desired density to form a layer of improved sub grade -- By Mechanical Means Spec. No.: MORTH - 401

Cubic Meter

574.00

11.00

75b / 23 MORTH 401

Laying and spreading available soil in the subgrade on a prepared surface, pulverizing, mixing the spread soil in place with rotavator with 3 per cent slaked lime having minimum content of 70 per cent of CaO, grading with motor grader and compacting with the road roller at OMC to the desired density to form a layer of improved sub grade -- By Manual Means Spec. No.: MORTH - 401

Cubic Meter

598.00

72.00

76 / 23 MORTH 402

Providing, laying and spreading soil on a prepared sub grade, pulverizing, mixing the spread soil in place with rotavator with 3 per cent slaked lime with minimum content of 70 per cent of CaO, grading with motor grader and compacting with the road roller at OMC to achieve at least 98 per cent of the max dry density to form a layer of sub base. Spec. No.: MORTH - 402

Cubic Meter

613.00

11.00

77 / 23 MORTH 403

Providing, laying and spreading soil on a prepared sub grade, pulverizing, adding the designed quantity of cement to the spread soil,

Cubic Meter

734.00

13.00

mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base. Spec. No.: MORTH - 403 78i / 23 MORTH 403

Cement Treated Crushed Rock or combination as per clause 403.2 and table 400.4in Sub base/ Base --Providing, laying and spreading Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base course Spec. No.: MORTH - 403

Cubic Meter

1457.00

14.00

78ii / 23 MORTH 403

Cement Treated Crushed Rock or combination as per clause 403.2 and table 400.4in Sub base/ Base --Providing, laying and spreading Material on a prepared sub grade, adding the designed quantity of cement to the spread Material, mixing in place with rotavator, grading with the motor grader and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base course. Spec. No.: MORTH - 403

Cubic Meter

1453.00

13.00

79i / 23 MORTH 404

Making 50 mm x 50 mm furrows, 25mm deep, 450 to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead Spec. No.: MORTH - 404.3.1

Square Meter

4.00

3.00

79ii / 23 MORTH 404

Making 50 mm x 50 mm furrows, 50mm deep, 450 to the center line of the road and at one metre interval in the existing thin bituminous wearing coarse including sweeping and disposal of excavated material within 1000 metres lead Spec. No.: MORTH - 404.3.1

Square Meter

8.00

5.00

80A I a / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse

Cubic Meter

1096.00

200.00

aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Manual Means Grading I a) (Using Screening Crushable type such as Moorum or Gravel) Spec. No.: MORTH - 404 80A i b / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Manual Means Grading I b) (Using Screening Type A (13.2 mm Aggregate) Spec. No.: MORTH - 404

Cubic Meter

1275.00

210.00

80A ii c / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Manual Means Grading I c) (Using Screening Type B (11.2 mm Aggregate) Spec. No.: MORTH - 404

Cubic Meter

1338.00

210.00

80A iii a / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Manual Means Grading II a) (Using Screening Crushable type such as Moorum or Gravel) Spec. No.: MORTH - 404

Cubic Meter

1260.00

210.00

80A iii b / 23

Providing, laying, spreading and compacting stone aggregates of specific sizes to water

Cubic Meter

1405.00

210.00

MORTH 404

bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment.to the required density. By Manual Means Grading II b) (Using Screening Type B (11.2 mm Aggregate) Spec. No.: MORTH - 404

80B ii a / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment.to the required density. By Mechanical Means Grading I a) (Using Screening Crushable type such as Moorum or Gravel) Spec. No.: MORTH - 404

Cubic Meter

963.00

14.00

80B ii b / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Mechanical Means Grading I b) (Using Screening Type A (13.2 mm Agr) Spec. No.: MORTH - 404

Cubic Meter

1089.00

14.00

80B ii c / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment.to the required density. By Mechanical Means Grading I c) (Using Screening Type B (11.2 mm Agr)

Cubic Meter

1152.00

14.00

Spec. No.: MORTH - 404 80B iii a / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Mechanical Means Grading II a) (Using Screening Crushable type such as Moorum or Gravel) Spec. No.: MORTH - 404

Cubic Meter

1074.00

14.00

80B iii b / 23 MORTH 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Net attachment. to the required density. By Mechanical Means Grading II b) (Using Screening Type B (11.2 mm Aggregate) Spec. No.: MORTH - 404

Cubic Meter

1219.00

14.00

81 / 23 MORTH 405

Crushed Cement Concrete Sub-base / Base Breaking and crushing of material obtained by breaking damaged cement concrete slabs to size range not exceeding 75 mm as specified in table 400.7 transporting the aggregates obtained from breaking of cement concrete slabs at a lead of L km., laying and compacting the same as sub base/ base course, constructed as WBM to clause 404 except the use of screening or binding Material. Spec. No.: MORTH - 405

Cubic Meter

219.00

83.00

82 / 23 MORTH 405

Penetration Coat Over Top Layer of Crushed Cement Concrete Base -- Spraying of bitumen over cleaned dry surface of crushed cement concrete base at the rate of 25 kg per 10 sqm by a bitumen pressure distributor, spreading of key aggregates at the rate of 0.13 cum per 10 sqm by a mechanical gritter and rolling the surface as per clause 506.3.8 Spec. No.: MORTH - 405.2

Square Meter

19.00

1.00

83 / 23 MORTH 406

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Spec. No.: MORTH - 406

Cubic Meter

1070.00

16.00

84 / 23 MORTH 407

Construction of Median and Island with Soil Taken from Roadway Cutting -- Construction of Median and Island above road level with approved material deposited at site from roadway cutting and excavation for drain and foundation of other structures, spread, graded and compacted as per clause 407 Spec. No.: MORTH - 407

Cubic Meter

221.00

82.00

85 / 23 MORTH 407

Construction of Median and Island with Soil Taken from Borrow Areas -- Construction of median and Island above road level with approved material brought from borrow pits, spread, sloped and compacted as per clause 407 Spec. No.: MORTH - 407

Cubic Meter

250.00

59.00

86 / 23 MORTH 407

Footpaths and Separators -- Construction of footpath/separator by providing a 150 mm compacted granular sub base as per clause 401 and 25 mm thick cement concrete grade M15, over laid with pre-cast concrete tiles in cement mortar 1:3 including provision of all drainage arrangements but excluding kerb channel. Spec. No.: MORTH - 407

Cubic Meter

609.00

34.00

87A i / 23 MORTH 410

Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base -- By Mix in Place Method for 53 mm maximum size Spec. No.: MORTH - 410

Cubic Meter

743.00

10.00

87A ii / 23 Crusher Run Macadam Base -- Providing MORTH crushed stone aggregate, depositing on a 410 prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base -- By Mix in

Cubic Meter

821.00

10.00

Place Method for 45 mm maximum size Spec. No.: MORTH - 410 87B i / 23 MORTH 410

Crusher Run Macadam Base -- Providing crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base -- By Mixing Plant Method for 53 mm maximum size Spec. No.: MORTH - 410

Cubic Meter

856.00

10.00

87B ii / 23 Crusher Run Macadam Base -- Providing MORTH crushed stone aggregate, depositing on a 410 prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller to clause 410 to form a layer of sub-base/Base -- By Mixing Plant Method for 45 mm maximum size Spec. No.: MORTH - 410

Cubic Meter

592.00

10.00

88 / 23 MORTH 410

Lime, Fly ash Stabilized Soil Sub-Base -Construction of Sub-base using lime - Fly ash admixture with granular soil, free from organic matter/ deleterious material or clayey silts and low plasticity clays having PI between 5 and 20 and liquid limit less than 25 and commercial dry lime, slaked at site or pre-slaked with CaO content not less than 50 per cent, Fly ash to conform to gradation as per clause 4.3 of IRC: 88-1984, lime + Fly ash content ranging between 10 to 30 per cent, the minimum unconfined compressive strength and CBR value after 28 days curing and 4 days soaking to be 7.5kg/sq, cm and 25 per cent respectively, all as specified in IRC: 88-1984. Spec. No.: MORTH - 410

Cubic Meter

685.00

5.00

89 / 23 MORTH 502

Prime coat (Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means. ) Spec. No.: M.O.R.T & H - 502

Square Meter

36.00

0.20

90a i / 23 MORTH 503

Providing and applying tack coat on the prepared surface heating by fames in roller and spraying bitumen set footed in bitumen boller on B.T. surface 3 kg/10 sqm.VG-30 bulk Spec. No.: M.O.R.T & H - 503

Square Meter

20.00

0.20

90a ii / 23

Providing and applying tack coat on the

Square

32.00

0.20

MORTH 503

prepared surface heating by fames in roller and spraying bitumen boller on B.T. surface 5 kg/10 sqm. VG-30 bulk Spec. No.: M.O.R.T & H - 503

Meter

90c i / 23 MORTH 503

Providing and applying tack coat on the prepared surface heating by fames in roller and spraying bitumen with spray set footed in bitumen boiler on Granular surface with primer @ 7.5 kg/10 sqm with VG-30 bulk Bitumen Spec. No.: M.O.R.T & H - 503

Square Meter

47.00

0.20

90d i / 23 MORTH 503

Providing and applying tack coat on the prepared surface heating by fames in roller and spraying bitumen with spray set footed in bitumen boiler on W.B.M. surface with primer @ 10 kg/10 sqm with VG-30 bulk Bitumen Spec. No.: M.O.R.T & H - 503

Square Meter

63.00

0.20

90e / 23 MORTH 503

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributer at the rate of 0.20 kg per Sq.Mt. on the prepared bituminous / granular surface cleaned with mechanical broom. Spec. No.: M.O.R.T & H - 503

Square Meter

13.00

0.20

91A / 23 MORTH 503

Bituminous macadam: Proving and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 80/100 mm compacted thickness with 3.3 % VG-30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment. Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.504 and IRC-SP-97-2013

Cubic Meter

7214.00

33.00

Cubic Meter

7506.00

35.00

91B / 23 MORTH 503

Bituminous macadam: Proving and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50/75 mm compacted thickness with 3.4 % VG30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer

and V-Net attachment. Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.504 and IRC-SP-97-2013 92 / 23 MORTH 507

Dense Bituminous macadam: Proving and laying dense bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder @4.00 to 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment with Stone Dust filler. Spec. No.: As per MORTH specification Fifth Edition Clause No.507 and IRC-SP-97-2013

Cubic Meter

8568.00

37.00

93 / 23 MORTH 507

Bituminous Concrete Providing and laying bituminous concrete using crushed aggregates of specified grading premixed with bituminous binder @ 5.00 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen,Excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment with Stone Dust filler

Cubic Meter

9892.00

34.00

Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.507 and IRC-SP-97-2013 94a i / 23 MORTH 509

Surface Dressing -- Providing and laying surface dressing as wearing course in single coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. -- a) 19 mm nominal chippling size (bitumen 12.00 kg/10 Sq.Mt.) -- Bitumen VG-30 bulk Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.509

Square Meter

91.00

1.00

94b i / 23 MORTH

Surface Dressing -- Providing and laying surface dressing as wearing course in single

Square Meter

75.00

1.00

509

coat using crushed stone aggregates of specified size on a layer of bituminous binder laid on prepared surface and rolling with 8-10 tonne smooth wheeled steel roller. -- b) 13 mm nominal chippling size (bitumen 10.00 kg/10 Sq.Mt -- Bitumen VG-30 bulk Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.509

95a / 23 MORTH 510

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type”A”seal coat but excluding prime / tack coat. For Bitumen VG-30 bulk--USING drum mix type hot mix plant with SCADA Ordinary Paver, with Static roller Spec. No.: As per MORTH specification Fifth Edition Clause No.510

Square Meter

207.00

11.00

95b / 23 MORTH 510

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type”A”seal coat but excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Ordinary Paver with static roller. Spec. No.: As per MORTH specification Fifth Edition Clause No.510

Square Meter

209.00

11.00

95c / 23 MORTH 510

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid

Square Meter

210.00

11.00

to the specified level and cross fall using Type”A”seal coat but excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment. Spec. No.: As per MORTH specification Fifth Edition Clause No.510 and IRC-SP-97-2013 96a / 23 MORTH 508

Closed Graded Premix Surfacing- Providing and Laying CGC 20 mm thickness composed of 13.2 mm to 0.09 mm aggregates Type B premixed with bituminous binder @ 19 kg/10 sqmt transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen,Excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment. Spec. No.: Spec. No.: As per MORTH specification Fifth Edition Clause No.508 and IRC-SP-97-2013

Square Meter

165.00

9.00

96b / 23 MORTH 508

Closed Graded Premix Surfacing- Providing and Laying CGC 20 mm thickness composed of 11.2 mm to 0.09 mm aggregates Type A premixed with bituminous binder @ 22 kg/10 sqmt transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen,Excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Net attachment. Spec. No.: As per MORTH specification Fifth Edition Clause No.508 and IRC-SP-97-2013

Square Meter

193.00

9.00

97a i / 23 MORTH 513

Seal Coat (Providing and laying seal coat seeling the voids in a bituminous surface laid to the specified level and cross fall using Type A seal coats using 60/70 bulk Spec. No.: M.O.R.T & H - 513

Square Meter

71.00

7.00

97b I / 23 MORTH 513

Seal Coat -- Providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes / hour using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. Type B seal coats

Square Meter

50.00

6.00

using Bitumen VG-30 bulk Spec. No.: M.O.R.T & H - 513 98i / 23 MORTH 803

Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over 10cm wide) (MORTH-803) -- New Surface Spec. No.: MORTH-803

Square Meter

109.00

64.00

98ii / 23 MORTH 803

Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Upto 10cm wide) (MORTH-803) -- New Surface Spec. No.: MORTH-803

Square Meter

97.00

53.00

99i / 23 MORTH 803

Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Over 10cm wide) (MORTH-803) -- Old Surface Spec. No.: MORTH-803

Square Meter

76.00

47.00

99ii / 23 MORTH 803

Painting Line, Dashes, Arrows etc on Roads in two coats on new work with ready mixed road marking paint confirming to I.S. 164 on Bituminous surface including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control (Upto 10cm wide) (MORTH-803) -- Old Surface Spec. No.: MORTH-803

Square Meter

81.00

53.00

100 / 23 MORTH 513

Road Delineators supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80x100mm rectangular or 75mm dia. Circular reflectorised panels at the top, buried or pressed into the ground and confirming to I.R.C. 79 and the drawings. Spec. No.: M.O.R.T & H - 513

Number

929.00

10.00

101a / 23 MORTH

Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a

Running Meter

2784.00

113.00

810

W metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810) Spec. No.: MORTH-810

101b / 23 MORTH 810

Metal Beam Crash Barrier -- Type - B, THRIE : Running Metal Beam Crash Barrier (Providing and Meter erecting a Thrie metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 85 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm, 546 mm long complete as per clause 810) Spec. No.: MORTH-810

3882.00

113.00

102 / 23 MORTH 810

Flexible Crash Barrier, Wire Rope Safety Barrier (Providing and erecting a wire rope safety barrier with vertical posts of medium weight RS Joist (ISMB series) 100 mm x 75 mm (11.50 kg/m), 1.50 m long 0.85 m above ground and 0.65 m below ground level, split at the bottom for better grip, embedded in M 15 grade cement concrete 450 x 450 x 450 mm, 1.50 m center to center and with 4 horizontal steel wire rope 40 mm dia and anchored at terminal posts 15 m apart. Terminal post to be embedded in M 15 grade cement concrete foundation 2400 x 450 x 900 mm (depth), strengthened by a strut of RS joist 100 x 75 mm, 2 m long at 450 inclination and a tie 100 x 8 mm, 1.50 m long at the bottom, all embedded in foundation concrete as per approved design and drawing, rate excluding excavation and cement concrete.) Spec. No.: MORTH-810

Running Meter

2037.00

368.00

103a / 23 MORTH

Anti - Glare Screen with 25 mm steel pipe framework fixed with circular and rectangular vans (Providing and erecting an anti - glare screen with 25 mm dia vertical pipes fabricated

Running Meter

3008.00

433.00

and framed in the form of panels of one metre length and 1.75 mtr height fixed with circular vane 250 mm dia at top and rectangular vane 600 x 300 mm at the middle, made out of steel sheet of 3 mm thickness, end vertical pipes of the panel made larger for embedding in foundation concrete, applying 2 coats of paint on all exposed surfaces, all as per approved design and drawings.) Spec. No.: As directed 103b / 23 MORTH

Anti - Glare Screen with Rectangular Vane of MS sheet (Providing and erecting anti - glare screen with rectangular vanes of size 750 x 500 mm made from MS sheet, 3 mm thick and fixed on MS angle 50 x 50 x 6 mm at an angle of 450 to the direction of flow of traffic, 1.5 m center to center, top edge of the screen 1.75 m above ground level, vertical post firmly embedded in cement concrete foundation 0.60 m below ground level, applying 2 coats of paint on exposed faces, all complete as per approved design and drawings) Spec. No.: As directed

Running Meter

827.00

165.00

104 / 23 MORTH

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) Spec. No.: As directed

Square Meter

639.00

159.00

5A: BR

: Bridge Works

1a / 24 BR 3A

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in earth, soils of all types, sand, gravel, soft murum etc. Complete. By Manual Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

183.00

183.00

1b / 24 BR 3A

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in earth, soils of all types, sand, gravel, soft murum etc. Complete. By Mechanical Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

113.00

47.00

2a / 24 BR 3B

Excavation for foundation in hard murum including shoring & strutting as necessary & disposing off excavated stuff as directed etc. Complete. By Manual Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

207.00

207.00

2b / 24 BR 3B

Excavation for foundation in hard murum including shoring & strutting as necessary & disposing off excavated stuff as directed etc. Complete. By Mechanical Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

123.00

51.00

3a / 24 BR 3C

Excavation for foundation in hard murum and boulders including shoring & strutting as necessary & disposing off excavated stuff as directed etc. Complete. By Manual Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

254.00

254.00

3b / 24 BR 3C

Excavation for foundation in hard murum and boulders including shoring & strutting as necessary & disposing off excavated stuff as directed etc. Complete. By Mechanical Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

144.00

66.00

4a / 24 BR 3D

Excavation for foundation in soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etc. Complete. By Manual Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

456.00

456.00

4b / 24 BR 3D

Excavation for foundation in soft rock including shoring and strutting as necessary and disposing off excavated stuff as directed etc. Complete. By Mechanical Means. Spec. No.: BR.3 Page No. 102

Cubic Meter

284.00

80.00

5 / 24 BR 3E

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in hard rock (blasted). Spec. No.: BR.3 Page No. 102

Cubic Meter

774.00

429.00

6 / 24 BR 3E

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in hard rock (by controlled blasting). Spec. No.: BR.3 Page No. 102

Cubic Meter

842.00

496.00

7 / 24 BR 3F

Excavation for foundation including shoring and strutting as necessary & disposing off excavated stuff as directed in hard rock chiselled and wedged or line drilled. (excluding dewatering) Spec. No.: BR-3 Page No. 102

Cubic Meter

1039.00

983.00

8 / 24 BR 3G

Excavation for foundation including shoring and strutting as necessary and disposing off excavated stuff as directed in laterite rock. Spec. No.: BR.3 Page No. 102

Cubic Meter

748.00

623.00

9 / 24 BR 3G

Providing and fixing 25mm dia. Steel anchor dowel in hard rock including drilling hole of 32 mm dia. up to 0.75 mtrs depth,. placing the dowel in position and effectively grouting the hole with C.M. 1:1 proportion etc. complete. Spec. No.: As directed by Engineer in charge.

Number

1303.00

341.00

Cubic

186.00

57.00

10A 1 / 24 Dewatering including diversion of

BR 4 A

stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling, PCC and concreting etc. complete. A . for all sorts of soil. For post monsoon flow. i) Abutment Spec. No.: Br. 4 Page No. 103

Meter

10A 2 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling, PCC and concreting etc. complete. A . for all sorts of soil. For post monsoon flow. ii) Piers Spec. No.: Br. 4 Page No. 103

Cubic Meter

291.00

57.00

10A 3 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling, PCC and concreting etc. complete. A . for all sorts of soil . For post monsoon flow. iii) Returns Spec. No.: Br. 4 Page No. 103

Cubic Meter

86.00

57.00

10A 4 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling, PCC and concreting etc. complete. A . for all sorts of soil . For post monsoon flow. iv) Raft & Cut of walls Spec. No.: Br. 4 Page No. 103

Cubic Meter

234.00

57.00

10B 1 / 24 Dewatering including diversion of

Cubic

453.00

124.00

BR 4 A

stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling PCC and concreting etc. complete B. For all sorts of soil in perinnial river i) Abutment Spec. No.: Br. 4 Page No. 103

Meter

10B 2 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation, bedding, soling, PCC and concreting etc. complete. B . for all sorts of soil in perinnial river. ii) Piers Spec. No.: Br. 4 Page No. 103

Cubic Meter

697.00

124.00

10B 3 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation bedding, soling, PCC and concreting etc. complete. B. for all sorts of soil in perinnial river. iii) Returns. Spec. No.: Br. 4 Page No. 103

Cubic Meter

208.00

124.00

10B 4 / 24 Dewatering including diversion of BR 4 A stream providing coffer dams bunds etc. as may be necessary for piers and abutments, foundation and other parts of the work and bailing out and pumping out water during and after excavation as may be necessary for all items of construction i.e. excavation bedding, soling, PCC and concreting etc. complete. B for all sorts of soil in perinnial river iv) Raft & Cut off wall Spec. No.: Br. 4 Page No. 103

Cubic Meter

557.00

124.00

11a / 24 BR 4 B

Hour

85.00

83.00

Dewatering on BHP basis by using water pump including diversion of

stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required. a) By using 3.0 BHP Pump Spec. No.: BR 4 Page No 104.105 Note : Prior approval of Superintending Engineer will be necessary. 11b / 24 BR 4 B

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required. b) By using 5.0 to 9.0 BHP Pump Spec. No.: BR 4 Page No 104.105

Hour

113.00

111.00

Hour

139.00

136.00

Cubic Meter

3797.00

794.00

Note : Prior approval of Superintending Engineer will be necessary. 11c / 24 BR 4 B

Dewatering on BHP basis by using water pump including diversion of stream, providing coffer dams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required. c) By using 10.0 to 19.0 BHP Pump Spec. No.: BR 4 Page No 104.105 Note : Prior approval of Superintending Engineer will be necessary.

12a / 24 BR 5A

Providing & laying in situ M-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary bailing out water, compacting and curing. (including formwork, centering.) (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.With natural sand. Spec. No.: BR.5 Page No. 105 and B.7, Page No. 38

12b / 24 BR 5A

Providing & laying in situ M-10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary bailing out water, compacting and curing. (including formwork, centering.) (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.With crushed sand. Spec. No.: BR.5 Page No. 105 and B-7 / Page No. 38

Cubic Meter

3715.00

794.00

13 / 24 BR 6

Providing uncoursed rubble trap/ granite/ quartzite/ gneiss stone masonry in cement mortar 1:5 for foundation of piers, abutments, wings etc. including bailing out of water striking joints and watering complete. Spec. No.: BR.6 Page No. 105

Cubic Meter

3279.00

1228.00

14 / 24 BR 8

Providing, fabricating, launching, floating and grounding in position steel curbs for wells with necessary steel bracing and steel cutting edges as shown in the detailed drawings, etc. complete. Spec. No.: BR.8 Page No. 108

Metric Tonne

68336.00

9598.00

15a / 24 BR 9A

Providing & laying in situ M-10 c.c. of trap/ granite/ quartzite/ gneiss metal in the hollow of the steel curbs including compacting by vibrating and curing complete. (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand . Spec. No.: BR.9 Page No. 109 and B.7, Page No.38

Cubic Meter

3943.00

780.00

15b / 24 BR 9A

Providing & laying in situ M-10 c.c. of trap/ granite/ quartzite/ gneiss metal in the hollow of the steel curbs including compacting by vibrating and curing complete. (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.9 Page No. 109 And B 7

Cubic Meter

3861.00

780.00

/Page No. 38 16 / 24 BR 10

Providing, fabricating & setting out Mild Steel cutting edges for R.C.C well curbs as shown on the detailed drawings. etc. complete. Spec. No.: BR.10 Page No. 110

Metric Tonne

63883.00

4953.00

17A a i / 24 BR 13A

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.With natural sand . Spec. No.: BR.13 Page No. 112 and B. 7, Page No.38

Cubic Meter

4945.00

644.00

17A a ii / 24 BR 13A

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.With crushed sand. Spec. No.: BR.13 Page No. 112 And B 7 /Page No. 38

Cubic Meter

4859.00

644.00

17A b i / 24 BR 13A

Providing and laying in situ M-25 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand . Spec. No.: BR.13 Page No. 112 and B. 7, Page No.38

Cubic Meter

5633.00

644.00

17A b ii / 24

Providing and laying in situ M-25 R.C.C. of trap/ granite/ quartzite/

Cubic Meter

5553.00

644.00

BR 13A

gneiss metal in well steining including compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.13 Page No. 112 And B 7 /Page No. 38

17B a i / 24 BR

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).With natural sand. Spec. No.: BR.13 Page No. 112 and B. 7, Page No.38

Cubic Meter

5515.00

644.00

17B a ii / 24 BR

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).With crushed sand. Spec. No.: BR.5 Page No. 105

Cubic Meter

5398.00

644.00

17B b i / 24 BR

Providing and laying in situ M-25 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand . Spec. No.: BR.13 Page No. 112 and B.

Cubic Meter

6087.00

644.00

7, Page No.38 17B b ii / 24 BR

Providing and laying in situ M-25 R.C.C. of trap/ granite/ quartzite/ gneiss metal in well steining including compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering.) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.9 Page No. 109

18-1 / 24 BR 14

Sinking of wells for foundation through Running all strata, except rock which can be Meter removed by grabbing and chiseling soft disintegrated rock which required special efforts, including blasting, large scale dewatering heavy chiseling, cutting by pneumatic tools and all materials available to sink through such strata including removal of obstacle and use of necessary plant and machinery, divers etc. and proper seating of the wells. Depth upto 5 m.etc. complete i) Well Dia. upto 5 metres Spec. No.: BR.14 Page No. 113

Cubic Meter

5971.00

644.00

49665.00

24424.00

71228.00

47175.00

Notes : (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

18-2 / 24 BR 14

Sinking of wells for foundation through Running all strata except rock which can be Meter removed by grabbing and chiseling soft disintegrating rock which required special efforts, including blasting, large scale dewatering heavy chiseling, cutting by pneumatic tools and all materials available to sink through such strata including removal of obstacle and use of necessary plant and machinery, divers etc. and proper seating of the well. Depth up to 5 m.

etc. complete ii) Well Dia. above 5 metres & upto 6 metres Spec. No.: BR.14 Page No. 113 Notes : (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

18-3 / 24 BR 14

Sinking of wells for foundation through Running all strata except rock which can be Meter removed by grabbing and chiseling soft disintegrating rock which required special efforts, including blasting, large scale dewatering heavy chiseling, cutting by pneumatic tools and all materials available to sink through such strata including removal of obstacle and use of necessary plant and machinery, divers etc. and proper seating of the well. Depth up to 5 m. etc. complete iii) Well Dia. above 6 meters & upto 7meters Spec. No.: BR.14 Page No. 113

97077.00

47366.00

Notes : (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate 18-4 / 24 BR 14

Sinking of wells for foundation through Running all strata except rock which can be Meter removed by grabbing and chiseling soft disintegrating rock which required special efforts, including blasting, large scale dewatering heavy chiseling, cutting by pneumatic tools and all materials available to sink through such strata including removal of obstacle and use of necessary plant and machinery, divers etc. and proper seating of the well. Depth up to 5 m. etc. complete iv) Dia. above 7 meters

126472.00 61709.00

& up to 8 meters Spec. No.: BR.14 Page No. 113 Notes : (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate 19 / 24 BR 14

Extra charges for sinking of various dia. well foundation in hard rock encountered during sinking by chiselling in water. Spec. No.: BR. 14A Page No. 113

Cubic Meter

1185.00

1185.00

20 / 24 BR 16

Providing steel anchor dowels at the base of the well including drilling holes of 60 mm dia. with cement mortar 1:1 up to 2.5 m depth in rock, placing the dowels in position and effectively grouting the holes. (32mm dia. steel Rod of 4.0 m length grouted up to 2.5 m depth.). Spec. No.: BR.16 Page No. 120

Number

6043.00

1874.00

21 / 24 BR 16A

Providing steel anchor dowels through Steining of the wells, including drilling dia. 60mm holes upto 2.5 m depth into rock, including placing dia. 32 mm steel Bars 2.5 m in the hole and 4.00 m into staining and effectively grouting the hole with cement mortar 1:1 proportion and including provision of necessary ducts through staining. Spec. No.: BR. 16 Page No. 120

Number

6104.00

2176.00

22A a i / 24 BR 17A

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary. (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.17 Page No. 120 and B 7, Page No.38

Cubic Meter

4743.00

909.00

22A a ii /

Providing and laying in situ M-15 c.c. of

Cubic

4660.00

909.00

24 BR 17A

trap /granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary. (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Meter

22A b i / 24 BR 17B

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells under water including compaction and curing wherever necessary.(Under Water) (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Cubic Meter

5009.00

909.00

22A b ii / 24 BR 17B

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells under water including compaction and curing wherever necessary.(Under Water) (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Cubic Meter

4926.00

909.00

22B a i / 24 BR

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary. (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN / DRUM Mixer). With natural sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Cubic Meter

5291.00

909.00

22B a ii / 24 BR

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary. (Cement

Cubic Meter

5177.00

909.00

5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN / DRUM Mixer). With Crushed sand Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38 22B b i / 24 BR

Providing and laying M-15 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Cubic Meter

5557.00

1168.00

22B b ii / 24 BR

Providing and laying in situ M-15 c.c. of trap /granite /quartzite /gneiss metal for the bottom plugs of wells under water including compaction and curing wherever necessary.(Under Water) (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.17 Page No. 120 and B. 7, Page No.38

Cubic Meter

5444.00

1168.00

23 / 24 BR 18

Providing and filling in well with sand /rubble and sand/single and sand including compaction between the top and bottom plugs. Spec. No.: BR.18 Page No. 122

Cubic Meter

757.00

213.00

Cubic Meter

3978.00

809.00

24A a / 24 Providing and laying in situ M-10 BR 19A R.C.C. of trap /granite/ quartzite/ gneiss metal for top plug of wells including compaction by vibration and curing. (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.19 Page No.123 and B.

7, Page No.38 24A b / 24 Providing and laying in situ M-10 BR 19A R.C.C. of trap /granite/ quartzite/ gneiss metal for top plug of wells including compaction by vibration and curing. (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.19 Page No.123 and B. 7, Page No.38

Cubic Meter

3896.00

809.00

24B a / 24 Providing and laying in situ M-10 BR R.C.C. of trap /granite/ quartzite/ gneiss metal for top plug of wells including compaction by vibration and curing. (Cement 4.05 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.19 Page No.123 and B. 7, Page No.38

Cubic Meter

4614.00

837.00

25A a i / 24 BR 24

Providing and laying in situ M.15 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

4590.00

761.00

25A a ii / 24 BR 24

Providing and laying in situ M-15 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand.

Cubic Meter

4507.00

761.00

Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38 25A b i / 24 BR 24

Providing and laying in situ M-20 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

5714.00

761.00

25A b ii / 24 BR 24

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

5094.00

761.00

25B a i / 24 BR

Providing and laying in situ M.15 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

5138.00

761.00

25B a ii / 24 BR

Providing and laying in situ M-15 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and

Cubic Meter

5025.00

761.00

curing complete. (Excluding reinforcement and including shuttering). (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38 25B b i / 24 BR

Providing and laying in situ M-20 R.C.C. of trap/ granite /quartzite /gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

5486.00

761.00

25B b ii / 24 BR

Providing and laying in situ M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for R.C.C. well /pile cap including necessary formwork compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including shuttering). (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand Spec. No.: BR.24 Page No. 124 and B. 7, Page No.38

Cubic Meter

5373.00

761.00

26a / 24 BR 27a

Providing and laying M-10 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height). (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.27 Page No. 127 and B.

Cubic Meter

4140.00

923.00

7, Page No.38 26b / 24 BR 27a

Providing and laying M-10 R.C.C. of trap/ granite /quartzite /gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height). (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

4057.00

923.00

27a / 24 Providing and laying M-10 R.C.C. of BR 27A b trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete with plums 15 percent (excluding finishing with cement plaster and dewatering) including formwork and bailing out of water. (up to 4 Mt. height) (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.27(a) Page No. 127 and B. 7, Page No.38

Cubic Meter

4188.00

974.00

27b / 24 Providing and laying M-10 R.C.C. of BR 27A b trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete with plums 15 percent (excluding finishing with cement plaster and dewatering) including formwork and bailing out water. (upto 4 Mt. height) (Cement 4.05 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.27(a) Page No. 127 and B. 7, Page No.38 Note :1. For item No. 27 basic rate shall be increased for height above 4.00 m,in following manners (A) Depth 5 to 10 m Add 30% extra for rate

Cubic Meter

4106.00

974.00

(B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

28A a i / 24 BR 27B

Providing and laying M-15 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5100.00

978.00

28A a ii / 24 BR 27B

Providing and laying M-15 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5021.00

978.00

28A b i / 24 BR 27B

Providing and laying M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5475.00

978.00

28A b ii / 24 BR 27B

Providing and laying M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5397.00

978.00

28B a i / 24 BR

Providing and laying M-15 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand.. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5699.00

999.00

28B a ii / 24 BR

Providing and laying M-15 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand . Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38

Cubic Meter

5573.00

999.00

28B b i / 24 BR

Providing and laying M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete.

Cubic Meter

6065.00

999.00

(Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38 28B b ii / 24 BR

Providing and laying M-20 R.C.C. of trap/ granite/ quartzite/ gneiss metal for cast in situ piers, abutments, returns, wings, etc. including compacting by vibrating and curing complete. (Excluding finishing with cement plaster) including formwork and bailing out of water. (up to 4m height) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.27 Page No. 127 and B. 7, Page No.38 Note :1. For item No. 28 basic rate shall be increased for height above 4.00 m,in following manners (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

Cubic Meter

5939.00

999.00

29A a / 24 Providing and laying in situ M-20 BR 29A controlled concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. caps over piers and abutments with projection including necessary scaffolding, formwork, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including centering.) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand.

Cubic Meter

5292.00

745.00

Spec. No.: BR.29, Page No. 129 and B. 7, Page No.38 29A b / 24 Providing and laying in situ M-20 BR 29A controlled concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. caps over piers and abutments with projection including necessary scaffolding, formwork, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including centering.) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.29, Page No. 129 and B. 7, Page No.38

Cubic Meter

5214.00

745.00

29B a / 24 Providing and laying in situ M-20 BR controlled concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. caps over piers and abutments with projection including necessary scaffolding, formwork, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including centering.) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.29, Page No. 129 and B. 7, Page No.38

Cubic Meter

5903.00

761.00

29B b / 24 Providing and laying in situ M-20 BR controlled concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. caps over piers and abutments with projection including necessary scaffolding, formwork, compacting by vibrating, finishing and curing complete. (Excluding reinforcement and including centering.) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.29, Page No. 129 and B. 7, Page No.38

Cubic Meter

5724.00

761.00

30A a / 24 Providing and laying in situ M-25 BR 30 controlled cement concrete of trap

Cubic Meter

5716.00

745.00

/granite /quartzite /gneiss metal for the R.C.C. concrete block below the bearing including scaffolding, compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including formwork.) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.30 Page No. 130 and B. 7, Page No.38 30A b / 24 Providing and laying in situ M-25 BR 30 controlled cement concrete of trap /granite /quartzite /gneiss metal for the R.C.C. concrete block below the bearing including scaffolding, compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including formwork.) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.30 Page No. 130 and B. 7, Page No.38

Cubic Meter

5584.00

745.00

30B a / 24 Providing and laying in situ M-25 BR controlled cement concrete of trap /granite /quartzite /gneiss metal for the R.C.C. concrete block below the bearing including scaffolding, compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including formwork.) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.30 Page No. 130 and B. 7, Page No.38

Cubic Meter

5807.00

761.00

30B b / 24 Providing and laying in situ M-25 BR controlled cement concrete of trap /granite /quartzite /gneiss metal for the R.C.C. concrete block below the bearing including scaffolding, compaction by vibrating, finishing and curing complete. (Excluding reinforcement and including formwork.) (Cement 8.50 bags/Cu.Mt.) With Fully

Cubic Meter

5676.00

761.00

Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.30 Page No. 130 and B. 7, Page No.38 31 / 24 BR 34A

Providing and fixing neoprene bearing Cubic as per detailed drawings. Centimeter Spec. No.: As directed by Engineer in charge.

2.00

0.20

32 / 24 BR 35A

Providing, cutting, bending, hooking, tieing in position and laying TMT FE 500 steel bar for reinforcement as per detailed drawings for all R.C.C. works. Spec. No.: BR.35 Page No. 134

Metric Tonne

61897.00

4898.00

33a / 24 Providing & joining by mild /TMT FE BR 35B a 500 steel reinforcement bars by bottle nuts including supplying and fitting them in position etc. complete. 25 mm dia. Spec. No.: As directed by Engineer in charge

Number

598.00

364.00

33b / 24 Providing & joining by mild /TMT FE BR 35B b 500 steel reinforcement bars by bottle nuts including supplying and fitting them in position etc. complete. 32 mm dia. Spec. No.: As directed by Engineer in charge.

Number

727.00

364.00

34a / 24 BR 36A

Providing welded joints for steel reinforcement bars for 25 mm dia. Spec. No.: BR.36 Page No. 134

Number

196.00

165.00

34b / 24 BR 36B

Providing welded joints of steel reinforcement bars above 32 mm dia. Spec. No.: BR.36 Page No. 134

Number

202.00

165.00

35A a i / 24 BR 38A

Providing and laying in situ M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 6.90 bags/Cu.Mt.) with fully

Cubic Meter

5904.00

1635.00

automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38 35A a ii / 24 BR 38A

Providing and laying in situ M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6 m) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38

Cubic Meter

5841.00

1635.00

35A b i / 24 BR 38A

Providing and laying in situ M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6712.00

1635.00

35A b ii / 24 BR 38A

Providing and laying in situ M-25 controlled cement concrete of trap/ gran-ite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6632.00

1635.00

35A c i / 24 BR 38A

Providing and laying in situ M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m) (Cement 9.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38

Cubic Meter

6968.00

1635.00

35A c ii / 24 BR 38A

Providing and laying in situ M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m) (Cement 9.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38

Cubic Meter

6888.00

1635.00

35B a i / 24 BR

Providing and laying in situ M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38

Cubic Meter

6018.00

1636.00

35B a ii / 24 BR

Providing and laying in situ M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for

Cubic Meter

5897.00

1635.00

R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6 m) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38 35B b i / 24 BR

Providing and laying in situ M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

7299.00

1635.00

35B b ii / 24 BR

Providing and laying in situ M-25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 4 m) (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

7179.00

1635.00

35B c i / 24 BR

Providing and laying in situ M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete

Cubic Meter

7555.00

1635.00

in solid/deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m) (Cement 9.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38 35B c ii / 24 BR

Providing and laying in situ M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in solid/ deck slab, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m) (Cement 9.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(a) Page No. 135 and B. 7, Page No.38 Note :1. For item No. 35 basic rate shall be increased for height above 4.00 m,in following manners (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

Cubic Meter

7435.00

1635.00

36A a i / 24 BR 38A

Providing and laying in situ M.20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphrams, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based

Cubic Meter

6326.00

1635.00

PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38 36A a ii / 24 BR 38A

Providing and laying in situ M.20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6245.00

1635.00

36A b i / 24 BR 38A

Providing and laying in situ M.25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6705.00

1635.00

36A b ii / 24 BR 38A

Providing and laying in situ M.25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 8.50 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With

Cubic Meter

6625.00

1635.00

Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38 36A c i / 24 BR 38A

Providing and laying in situ M-30 cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m). (Cement 9.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6961.00

1635.00

36A c ii / 24 BR 38A

Providing and laying in situ M-30 cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m). (Cement 9.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6881.00

1635.00

36B a i / 24 BR

Providing and laying in situ M.20 controlled cement con-crete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6707.00

1635.00

36B a ii / 24 BR

Providing and laying in situ M.20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

6588.00

1635.00

36B b i / 24 BR

Providing and laying in situ M.25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

7292.00

1635.00

36B b ii / 24 BR

Providing and laying in situ M.25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and Curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 6m). (Cement 8.50 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

Cubic Meter

7173.00

1635.00

36B c i / 24

Providing and laying in situ M-30 cement concrete of trap/ granite/

Cubic Meter

7548.00

1635.00

BR

quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m). (Cement 9.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38

36B c ii / 24 BR

Providing and laying in situ M-30 cement concrete of trap/ granite/ quartzite/ gneiss metal for R.C.C. Work including ramming, vibrating finishing and curing complete in main/cross girders, diaphragms, etc. (including formwork, centering, finishing in cement plaster and excluding reinforcement) (Height up to 3m). (Cement 9.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With Crushed sand. Spec. No.: BR.38(b & c) Page No. 135 and B. 7, Page No.38 Note :1. For item No. 36 basic rate shall be increased for height above 4.00 m,in following manners (A) Depth 5 to 10 m Add 30% extra for rate (B) Depth upto 15 m Add 40% extra for rate (C) Depth upto 20 m Add 60% extra for rate (D) Depth 20m & Above 100% extra for rate

Cubic Meter

7429.00

1635.00

37 / 24 Providing and laying buried type MORT&H expansion joint expansion gap being C1-2604 20 mm covered with 12 mm thick 200 mm wide galvinised weldable structural steel plate as per IS 2062 placed symmetrically to the centre line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm diameter 100 mm long galvanised nails

Cubic Meter

672.00

107.00

spaced 300 mm c/c along the centre line of the plate, all as specified in MORT & H clause 2604 Spec. No.: BR.43 Page No. 138 38 / 24 BR 43A

Providing Copper plate expansion joints as per detailed drawing No. 4/D1 of 1972 D type. Spec. No.: BR.43 Page No. 138

Running Meter

3032.00

107.00

39 / 24 BR 43B

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings. Spec. No.: BR.43 Page No. 138

Square Meter

1879.00

613.00

40a / 24 BR 45

Providing and laying in situ 1:4:8 cement concrete of trap /granite /quartzite /gneiss metal for haunch filling including compacting, curing complete. with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: B R.45 Page No. 139

Cubic Meter

3396.00

529.00

40b / 24 BR 45

Providing and laying in situ 1:4:8 cement concrete of trap /granite /quartzite /gneiss metal for haunch filling including compacting, curing complete. With fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: B R.45 Page No. 139

Cubic Meter

3315.00

529.00

41 / 24 BR 46

Providing trap/granite/quartzite/gneiss rubble filling over haunches and arches including hand packing. Spec. No.: BR.46 Page No. 140

Cubic Meter

710.00

100.00

42A a / 24 Providing and laying in situ M-20 c.c. of BR 47 trap /granite/ quartzite/ gneiss metal including compacting. finishing, curing and filling in joints with bitumen complete for wearing course 8cm thick. (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR.47(a) Page No. 140 and B. 7, Page No.38

Cubic Meter

5137.00

772.00

42A b / 24 Providing and laying in situ M-20 c.c. of BR 47 trap /granite/ quartzite/ gneiss metal including compacting. finishing, curing and filling in joints with bitumen complete for wearing course 8cm thick. (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR.47(a) Page No. 140 and B. 7, Page No.38

Cubic Meter

5055.00

772.00

42B a / 24 Providing and laying in situ M-20 c.c. of BR trap /granite/ quartzite/ gneiss metal including compacting. finishing, curing and filling in joints with bitumen complete for wearing course 8cm thick. (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR.47(a) Page No. 140 and B. 7, Page No.38

Cubic Meter

5700.00

787.00

42B b / 24 Providing and laying in situ M-20 c.c. of BR trap /granite/ quartzite/ gneiss metal including compacting. finishing, curing and filling in joints with bitumen complete for wearing course 8cm thick. (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR.47(a) Page No. 140 and B. 7, Page No.38

Cubic Meter

5584.00

787.00

Number

463.00

31.00

Cubic Meter

5924.00

1609.00

43 / 24 BR 48

Providing vent holes 100mm dia. G.I. pipe in the slab and wearing course with iron grill at the top and galvanised iron pipe at bottom as per drawing. Spec. No.: BR.48 Page No. 142

44A a / 24 Providing and laying in situ M-20 BR 50 R.C.C. of trap /granite /quartzite /gneiss metal for RCC work,of ballast walls, kerbs, box returns etc. including scaffolding, compaction, formwork finishing and curing complete. (excluding reinforcement) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with

SCADA enabled with reversible Drum Type mixer.With natural sand. Spec. No.: BR.50 Page No. 143 and B. 7, Page No.38 44A b / 24 Providing and laying in situ M-20 BR 50 R.C.C. of trap /granite /quartzite /gneiss metal for RCC work,of ballast walls, kerbs, box returns etc. including scaffolding, compaction, formwork finishing and curing complete. (excluding reinforcement) (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.With crushed sand. Spec. No.: BR.50 Page No. 143 and B. 7, Page No.38

Cubic Meter

5842.00

1609.00

44B a / 24 Providing and laying in situ M-20 BR R.C.C. of trap /granite /quartzite /gneiss metal for RCC work,of ballast walls, kerbs, box returns etc. including scaffolding, compaction, formwork finishing and curing complete. (excluding reinforcement) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).With natural sand. Spec. No.: BR.50 Page No. 143 and B. 7, Page No.38

Cubic Meter

6488.00

1610.00

44B b / 24 Providing and laying in situ M-20 BR R.C.C. of trap /granite /quartzite /gneiss metal for RCC work,of ballast walls, kerbs, box returns etc. including scaffolding, compaction, formwork finishing and curing complete. (excluding reinforcement) (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).With crushed sand. Spec. No.: BR.50 Page No. 143 and B. 7, Page No.38

Cubic Meter

6372.00

1610.00

Running Meter

1169.00

459.00

45A / 24 BR 51

Providing R.C.C. parapet with M-20 C.C. of trap/ granite/ quartzite/ gneiss metal with cast in situ/precast panels as per the detailed drawing including reinforcement, scaffolding, centering, formwork, compacting, finishing and

curing complete. with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. (Cement 6.90 bags/Cu.Mt.) Spec. No.: BR.51 (a) Page No. 144 and B. 7, Page No.38 45B / 24 BR

Providing R.C.C. parapet with M-20 C.C. of trap/ granite/ quartzite/ gneiss metal with cast in situ/precast panels as per the detailed drawing including reinforcement, scaffolding, centering, formwork, compacting, finishing and curing complete. With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). (Cement 6.90 bags/Cu.Mt.) Spec. No.: BR.51 (a) Page No. 144 and B. 7, Page No.38

Cubic Meter

1183.00

460.00

46 / 24 BR 51B

Providing railing of mild steel angle post 2M center to center of section 75mm x 75mm x 10mm or equivalent I/ channel section of height 1.05 above bridge surface with minimum anchor length of 30cm including hold fast of 25mm dia. M.S. bar welded at the bottom and concreting of 1:3:6 of size 30cm x 30cm x 30cm with three rows of 40mm B class G.I. pipe provided at 30 on center to center including scaffolding and with one coat of anticorrosive paint and over it two coats of oil painting, curing of concrete etc. complete. Spec. No.: B.R.51(b) Page No. 145

Running Meter

3222.00

876.00

47 / 24 BR 51C

Providing R.C.C. railing of cast in situ R.C.C. posts with M-20 c.c. of trap/ granite/ quartzite/ gneiss metal for horizontal and vertical members as per detailed drawings including reinforcement, scaffolding, centering, formwork, compaction, finishing and curing with watering chemical compound etc. complete. with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR.51(c) Page No. 145 and B. 7, Page No.38

Running Meter

2169.00

150.00

48 / 24 BR 55

Number

682.00

150.00

49A a / 24 Providing and casting special grade in BR 59 a M-35 controlled cement concrete for prestressed concrete work for main girder including slab, cross girder etc. including centering and scaffolding or launching including necessary plant &machinery for the job shuttering, vibrating, curing, finishing etc. complete. Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: BR-38 Page No.135 and B. 7, Page No.38

Cubic Meter

8032.00

1160.00

49A b / 24 Providing and casting special grade in BR 59 a M-35 controlled cement concrete for prestressed concrete work for main girder including slab, cross girder etc. including centering and scaffolding or launching including necessary plant &machinery for the job shuttering, vibrating, curing, finishing etc. complete. Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: BR-38 Page No.135 and B. 7, Page No.38

Cubic Meter

7967.00

1160.00

49B a / 24 Providing and casting special grade in BR M-35 controlled cement concrete for prestressed concrete work for main girder including slab, cross girder etc. including centering and scaffolding or launching including necessary plant &machinery for the job shuttering, vibrating, curing, finishing etc. complete. Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: BR-38 Page No.135 and B.

Cubic Meter

8979.00

508.00

Providing galvanised iron 100mm diameter water spouts as per drawings. Spec. No.: BR.55 Page No. 150

7, Page No.38 49B b / 24 Providing and casting special grade in BR M-35 controlled cement concrete for prestressed concrete work for main girder including slab, cross girder etc. including centering and scaffolding or launching including necessary plant & machinery for the job shuttering, vibrating, curing, finishing etc. complete. Precast/or cast in situ (Cement 10.20 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: BR-38 Page No.135 and B. 7, Page No.38

Cubic Meter

8826.00

508.00

50A a i / 24 BR 59 a

Providing and laying in situ controlled grade of M-15 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

4765.00

794.00

50A a ii / 24 BR 59 a

Providing and laying in situ controlled grade of M-15 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 5.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

4687.00

794.00

50A b i / 24 BR 59 a

Providing and laying in situ controlled grade of M-20 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 6.90 bags/Cu.Mt.) with fully automatic micro processor based PLC with

Cubic Meter

5158.00

794.00

SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: As directed by Engineer in charge. 50A b ii / 24 BR 59 a

Providing and laying in situ controlled grade of M-20 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer.. (Cement 6.90 bags/Cu.Mt.) With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5079.00

794.00

50A c i / 24 BR 59 a

Providing and laying in situ controlled grade of M-25 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. (Cement 8.50 bags/Cu.Mt.) With natural sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5744.00

794.00

50A c ii / 24 BR 59 a

Providing and laying in situ controlled grade of M-25 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. (Cement 8.50 bags/Cu.Mt.) With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5665.00

794.00

50B a i / 24 BR

Providing and laying in situ controlled grade of M-15 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix

Cubic Meter

5381.00

708.00

Plant (PAN Mixer). With natural sand. Spec. No.: As directed by Engineer in charge. 50B a ii / 24 BR

Providing and laying in situ controlled grade of M-15 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 5.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5255.00

708.00

50B b i / 24 BR

Providing and laying in situ controlled grade of M-20 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. (Cement 6.90 bags/Cu.Mt.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5747.00

708.00

50B b ii / 24 BR

Providing and laying in situ controlled grade of M-20 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).. (Cement 6.90 bags/Cu.Mt.) With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5621.00

708.00

50B c i / 24 BR

Providing and laying in situ controlled grade of M-25 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). (Cement 8.50 bags/Cu.Mt.) With natural sand.

Cubic Meter

6332.00

708.00

Spec. No.: As directed by Engineer in charge. 50B c ii / 24 BR

Providing and laying in situ controlled grade of M-25 of trap stone metal for R.C.C. works in cut off walls/curtain walls including necessary scaffolding, centering compacting by vibrator and finishing curing complete. With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). (Cement 8.50 bags/Cu.Mt.) With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

6206.00

708.00

51 / 24 BR 62

Providing 0.9 meter thick metal mat of rubble oversize metal for specified thickness a per detailed drawing including supplying all materials hand packing rubble spreading metal and hard murum including watering and compaction with power roller etc. complete. Spec. No.: As directed by Engineer in charge

Square Meter

1016.00

109.00

52 / 24 BR

Providing islands for laying steel curb or cutting edge of wells upto 3mtr. depth of standing water for two lane bridge. a) with earth Spec. No.: BR.7. P.No. 107

Number

157189.00 23669.00

53 / 24 BR

Providing islands for laying steel curb or cutting edge of wells upto 3mtr. depth of standing water for single lane bridge. -- with earth Spec. No.: BR.7. P.No. 107

Number

124376.00 24863.00

54 / 24 BR

Providing tar paper bearing pad including fixing etc. complete. Spec. No.: As directed by Engineer in charge

Square Meter

131.00

78.00

55 / 24 BR

Providing and fixing in position to exact profile and prestressing high tensile strands of specified ultimate strength, standard end anchorages, cable ducts, grouting ducts after pres-tressing and bearing plates with wedges as per detailed drawings including necessary plant and machinery for prestressing

Metric Tonne

177072.00

5250.00

etc. complete. a) For Strand Spec. No.: As directed by Engineer in charge. 56 / 24 BR

Providing and injecting epoxy grout Kilogram including structuring of crack in the body of slab girder by sand blasting fixing inlet tube arrangements including cost of materials, machinery required for the work, labour charges etc. complete. Spec. No.: As directed by Engineer in charge.

780.00

88.00

57 / 24 BR

Repairing of honey combed area, spilling area by chipping out the damaged spalled or honey combed portion of concrete up to behind rebars with rusting, cleaning of all rust, scale and loose materials scaffolding compressed air, machinery etc. complete. (Note.: Item includes use of air compressor, chipping machine and scaffolding for height of 8 to 10 meters.) Spec. No.: As directed by Engineer in charge.

Square Meter

395.00

31.00

58 / 24 BR

Providing and applying well mixed polymer cement slurry (polymer cement ratio 1:2) over well soaked but surface dry concrete and steel rebar for adhesion of fresh cement and sand mortar as per specification and as directed etc. complete. (Note : Item includes use of polymers like sikalatex or similar materials of relevant specification and scaffolding for height 8 to 10 meters.) Spec. No.: As directed by Engineer in charge.

Square Meter

493.00

30.00

59 / 24 BR

Repairs expansion joints by removing rich mix cement concrete including stacking the spoil as directed with all leads, lifts near expansion joints etc. (Note : use of equipments like Air compressor is considered in the item.) Spec. No.: As directed by Engineer in charge.

Square Meter

2196.00

164.00

Cubic

5724.00

1325.00

60A a / 24 Providing and laying M-35 grade c.c.

BR

for R.C.C. jacketing around the piers etc. complete. (Note : This item includes jacketing to piers of existing bridge. This item includes scaffolding for height of 8 to 10 meters.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With natural sand. Spec. No.: As directed by Engineer in charge.

Meter

60A b / 24 Providing and laying M-35 grade c.c. BR for R.C.C.jacketing around the piers etc. complete. (Note : This item includes jacketing to piers of existing bridge. This item includes scaffolding for height of 8 to 10 meters.) with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5592.00

1325.00

60B a / 24 Providing and laying M-35 grade c.c. BR for R.C.C. jacketing around the piers etc. complete. (Note : This item includes jacketing to piers of existing bridge. This item includes scaffolding for height of 8 to 10 meters.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With natural sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5860.00

1325.00

60B b / 24 Providing and laying M-35 grade c.c. BR for R.C.C.jacketing around the piers etc. complete. (Note : This item includes jacketing to piers of existing bridge. This item includes scaffolding for height of 8 to 10 meters.) With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). With crushed sand. Spec. No.: As directed by Engineer in charge.

Cubic Meter

5675.00

1325.00

Number

1288.00

167.00

61 / 24 BR

Providing and injecting epoxy grout including structuring of cracks in the body of slab girder, fixing inlet tube arrangement including cost of

materials, machinery required for the work labour charges etc. Note : 2Kg. of grout is consider per hole. Spec. No.: As directed by Engineer in charge. 62A a / 24 Providing M-30 R.C.C. cast in situ 450 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2043.00

490.00

62A b / 24 Providing M-30 R.C.C. cast in situ 475 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2117.00

511.00

62A c / 24 Providing M-30 R.C.C. cast in situ 500 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type

Running Meter

2275.00

559.00

mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62A d / 24 Providing M-30 R.C.C. cast in situ 525 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2428.00

588.00

62A e / 24 Providing M-30 R.C.C. cast in situ 550 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2528.00

588.00

62A f / 24 Providing M-30 R.C.C. cast in situ 600 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H

Running Meter

3116.00

903.00

- 1100 and 1700 62A g / 24 Providing M-30 R.C.C. cast in situ 625 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

3683.00

928.00

62A h / 24 Providing M-30 R.C.C. cast in situ 650 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

3847.00

963.00

62A i / 24 Providing M-30 R.C.C. cast in situ 750 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

4974.00

1256.00

62A j / 24 Providing M-30 R.C.C. cast in situ 800 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

5342.00

1344.00

62A k / 24 Providing M-30 R.C.C. cast in situ 825 BR mm dia.bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

5715.00

1437.00

62A l / 24 Providing M-30 R.C.C. cast in situ 900 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

6262.00

1574.00

62A m / 24

Running Meter

6757.00

1723.00

Providing M-30 R.C.C. cast in situ 975 mm dia. bored piles each of load

BR

capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

62A n / 24 Providing M-30 R.C.C. cast in situ BR 1000 mm dia.bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

8630.00

2228.00

62A o / 24 Providing M-30 R.C.C. cast in situ BR 1050 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

9106.00

2340.00

62A p / 24 Providing M-30 R.C.C. cast in situ BR 1100 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through

Running Meter

9770.00

2453.00

steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62A q / 24 Providing M-30 R.C.C. cast in situ BR 1200 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

11108.00

2790.00

62A r / 24 Providing M-30 R.C.C. cast in situ BR 1500 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

18094.00

4539.00

62B a / 24 Providing M-30 R.C.C. cast in situ 450 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock,

Cubic Meter

2175.00

308.00

excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62B b / 24 Providing M-30 R.C.C. cast in situ 475 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

2305.00

337.00

62B c / 24 Providing M-30 R.C.C. cast in situ 500 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

2442.00

368.00

62B d / 24 Providing M-30 R.C.C. cast in situ 525 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie

Cubic Meter

2586.00

401.00

arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62B e / 24 Providing M-30 R.C.C. cast in situ 550 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

2736.00

436.00

62B f / 24 Providing M-30 R.C.C. cast in situ 600 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

3833.00

513.00

62B g / 24 Providing M-30 R.C.C. cast in situ 625 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc.

Cubic Meter

4005.00

553.00

complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62B h / 24 Providing M-30 R.C.C. cast in situ 650 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

4185.00

594.00

62B i / 24 Providing M-30 R.C.C. cast in situ 750 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

5913.00

798.00

62B j / 24 Providing M-30 R.C.C. cast in situ 800 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA

Cubic Meter

6359.00

899.00

enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62B k / 24 Providing M-30 R.C.C. cast in situ 825 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

6589.00

952.00

62B l / 24 Providing M-30 R.C.C. cast in situ 900 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

7323.00

1119.00

62B m / 24 BR

Cubic Meter

8115.00

1298.00

Providing M-30 R.C.C. cast in situ 975 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer).

Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 62B n / 24 Providing M-30 R.C.C. cast in situ BR 1000 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

10083.00

1419.00

62B o / 24 Providing M-30 R.C.C. cast in situ BR 1050 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

10659.00

1549.00

62B p / 24 Providing M-30 R.C.C. cast in situ BR 1100 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

11270.00

1688.00

62B q / 24 Providing M-30 R.C.C. cast in situ BR 1200 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

13274.00

2016.00

62B r / 24 Providing M-30 R.C.C. cast in situ BR 1500 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Cubic Meter

20758.00

3151.00

63A a / 24 Providing M-35 R.C.C. cast in situ 450 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

2083.00

526.00

63A b / 24 Providing M-35 R.C.C. cast in situ 475

Running

2190.00

554.00

BR

mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Meter

63A c / 24 Providing M-35 R.C.C. cast in situ 500 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

2303.00

576.00

63A d / 24 Providing M-35 R.C.C. cast in situ 525 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

2461.00

622.00

63A e / 24 Providing M-35 R.C.C. cast in situ 550 BR mm dia. bored piles each of load capacity as per design and of specified

Running Meter

2681.00

679.00

diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700 63A f / 24 Providing M-35 R.C.C. cast in situ 600 BR mm dia.bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

3613.00

912.00

63A g / 24 Providing M-35 R.C.C. cast in situ 625 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

3809.00

961.00

63A h / 24 Providing M-35 R.C.C. cast in situ 650 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth

Running Meter

4097.00

1031.00

through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700 63A i / 24 Providing M-35 R.C.C. cast in situ 750 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

5191.00

1311.00

63A j / 24 Providing M-35 R.C.C. cast in situ 800 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

5530.00

1395.00

63A k / 24 Providing M-35 R.C.C. cast in situ 825 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement

Running Meter

5736.00

1446.00

including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700 63A l / 24 Providing M-35 R.C.C. cast in situ 900 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

6927.00

1742.00

63A m / 24 BR

Providing M-35 R.C.C. cast in situ 975 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

7873.00

1984.00

63A n / 24 Providing M-35 R.C.C. cast in situ BR 1000 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete

Running Meter

8845.00

2169.00

and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700 63A o / 24 Providing M-35 R.C.C. cast in situ BR 1050 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

9283.00

2290.00

63A p / 24 Providing M-35 R.C.C. cast in situ BR 1100 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

9886.00

2489.00

63A q / 24 Providing M-35 R.C.C. cast in situ BR 1200 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro

Running Meter

12549.00

3157.00

processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700 63A r / 24 Providing M-35 R.C.C. cast in situ BR 1500 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete with fully automatic micro processor based PLC with SCADA enabled with reversible Drum Type mixer. Spec. No.: BR-21 Page 124, MORT&H - 1100, 1600 and 1700

Running Meter

18540.00

4669.00

63B a / 24 Providing M-35 R.C.C. cast in situ 450 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2231.00

308.00

63B b / 24 Providing M-35 R.C.C. cast in situ 475 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant

Running Meter

2367.00

337.00

(PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 63B c / 24 Providing M-35 R.C.C. cast in situ 500 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2510.00

368.00

63B d / 24 Providing M-35 R.C.C. cast in situ 525 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

2661.00

401.00

63B e / 24 Providing M-35 R.C.C. cast in situ 550 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H

Running Meter

2819.00

436.00

- 1100 and 1700 63B f / 24 Providing M-35 R.C.C. cast in situ 600 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

3931.00

513.00

63B g / 24 Providing M-35 R.C.C. cast in situ 625 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

4113.00

553.00

63B h / 24 Providing M-35 R.C.C. cast in situ 650 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

4301.00

594.00

63B i / 24 Providing M-35 R.C.C. cast in situ 750 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

6066.00

798.00

63B j / 24 Providing M-35 R.C.C. cast in situ 800 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

6618.00

981.00

63B k / 24 Providing M-35 R.C.C. cast in situ 825 BR mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

6775.00

952.00

63B l / 24 Providing M-35 R.C.C. cast in situ 900 BR mm dia. bored piles each of load

Running Meter

7545.00

1119.00

capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 63B m / 24 BR

Providing M-35 R.C.C. cast in situ 975 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

8375.00

1298.00

63B n / 24 Providing M-35 R.C.C. cast in situ BR 1000 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

10357.00

1419.00

63B o / 24 Providing M-35 R.C.C. cast in situ BR 1050 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through

Running Meter

10961.00

1549.00

steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer) Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 63B p / 24 Providing M-35 R.C.C. cast in situ BR 1100 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

11601.00

1688.00

63B q / 24 Providing M-35 R.C.C. cast in situ BR 1200 mm dia. bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock, excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor based PLC with SCADA enabled concrete Batch Mix Plant (PAN Mixer). Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700

Running Meter

13668.00

2016.00

63B r / 24 Providing M-35 R.C.C. cast in situ BR 1500 mm dia.bored piles each of load capacity as per design and of specified diameter of as directed, placed through steel shell sunk to the required depth through all strata except rock,

Running Meter

21373.00

3151.00

excluding provision of reinforcement including placing concrete by tremie arrangement compaction of concrete and withdrawal of steel shall etc. complete With Fully Automatic Micro Processor Spec. No.: BR-21 Page 124, MORT&H - 1100 and 1700 64 / 24 BR

Providing, placing and driving in position 6mm thick permanent M.S. liner up to required depth with 12 mm thick M.S. cutting edge of 0.5 meter length of bottom including fabricating, cutting the M.S. sheet to required diameter and shape, welding the joints and driving with the help of required machineries including all materials, labour and lift etc. complete. Spec. No.: MORT&H 5th Revision

Metric Tonne

62343.00

8102.00

5B: MORTH

: Bridge Works

1a / 25 MORTH 304

Excavation for foundation of structure as per drawing and technical specification including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material. Marshy Soil up to 3.00 Meter depth by Manual Means Spec. No.: M.O.R.T & H - 304

Cubic Meter

510.00

506.00

1b / 25 MORTH 304

Excavation for foundation of structure as per drawing and technical specification including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material. Marshy Soil up to 3.00 Meter depth by Mechanical Means Spec. No.: M.O.R.T & H - 304

Cubic Meter

149.00

32.00

2 / 25 MORTH 304

Providing and filling Annular Space Around Footing in Rock by using concrete of M-15 grade. Spec. No.: M.O.R.T & H - 2100

Cubic Meter

3824.00

387.00

3 / 25 MORTH 300

Providing and filling Sand in Foundation trenches as per drawing and technical specifications Spec. No.: M.O.R.T & H - 300,2100

Cubic Meter

1274.00

109.00

4a / 25 MORTH 1400

Providing Stone masonry work in cement mortar 1:3 in foundation with watering complete as per drawing and technical specification complete -- Square Rubble Coursed rubble masonry first sort Spec. No.: M.O.R.T & H - 1400

Cubic Meter

3174.00

1059.00

4b / 25 MORTH 1400

Providing Stone masonry work in cement mortar 1:3 in foundation with watering complete as per drawing and technical specification complete -- Random Rubble masonry. Spec. No.: M.O.R.T & H - 1400

Cubic Meter

3308.00

1061.00

5 / 25 MORTH 1100

Providing and laying PCC M 15 levelling course of 100 mm thick below pile cap with fully automatic micro processor PLCwith SCADA enabled reversible Drum Type mixer. Spec. No.: M.O.R.T & H - 1100, 1700

Cubic Meter

3997.00

429.00

6 / 25 MORTH 304

Providing I st class Brick masonry work in 1:3 in substructure complete with watering excluding pointing and plastering, as per drawing and technical specifications. Spec. No.: MORT & H – 1300, 2200

Cubic Meter

4609.00

1084.00

7a / 25 MORTH 1400

Providing Stone masonry work in cement mortar 1:3 with watering for substructure complete as per drawing and technical specifications.-- Random Rubble Masonry Spec. No.: MORT & H – 1400, 2200

Cubic Meter

3339.00

1026.00

7b / 25 MORTH 1400

Providing Stone masonry work in cement mortar 1:3 with watering for substructure complete as per drawing and technical specifications. -- Coursed Rubble Masonry (first sort) Spec. No.: MORT & H – 1400, 2200

Cubic Meter

3449.00

1237.00

7c / 25 MORTH 1400

Providing Stone masonry work in cement mortar 1:3 with watering for substructure complete as per drawing and technical specifications. -- Ashlar Masonry (first sort) Spec. No.: MORT & H – 1400, 2200

Cubic Meter

4423.00

2007.00

8 / 25 MORTH 2700

Providing weep holes in Brick Running masonry/Plain/Reinforced concrete Meter abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure with slope of 1V: 20H towards drawing foce. Complete as per drawing and Technical specifications. Spec. No.: MORT & H -2700 & 2200

167.00

10.00

9a / 25 MORTH 2200

Back filling behind abutment, wing wall and return wall complete as per drawing & Technical Specifications.-- Granular material Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78

502.00

248.00

Cubic Meter

9b / 25 MORTH 2200

Back filling behind abutment, wing wall and return wall complete as per drawing & Technical Specifications. -- Sandy material Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78

Cubic Meter

857.00

248.00

10 / 25 MORTH 2200

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the - requirements laid down in clause 2504.2.2 of MORTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specifications. Spec. No.: MORT & H 2200 &-710.1.4 of IRC-78

Cubic Meter

778.00

215.00

11 / 25 MORTH 2000

Supplying, fitting and fixing in position Metric true to line and level cast steel rocker Tonne bearing conforming to IRC:83 (Pt-1) section IX and clause 2003 of MORTH specifications complete including all accessories as per drawing and technical specifications. Spec. No.: MORT & H -2000,1000,2200 &f IRC 83-1982

291.00

54.00

12 / 25 MORTH 2000

Supplying, fitting and fixing in position Metric true to line and level forged steel roller Tonne bearing conforming to IRC:83 (Pt-1) section IX and clause 2003 of MORTH specifications complete including all accessories as per drawing and technical specifications. Spec. No.: MORT & H – 2000 & 2200

583.00

54.00

13 / 25 MORTH 2000

Supplying, fitting and fixing in position true to line and level sliding plate bearing with PTFE surface sliding on stainless steel complete including all accessories as per drawing and technical specifications and BS:5400, section 9.1 & 9.2 (for PTFE) and clause 2004 of MORTH specifications. Spec. No.: MORT & H – 2000 & 2200

Metric Tonne

234.00

27.00

14 / 25

Supplying, fitting and fixing in position

Metric

1.40

0.10

MORTH 2000

true to line and level elastomeric bearing Tonne conforming to IRC:83 (Pt.-II) section IX and clause 2005 of MORTH specifications complete including all accessories as per drawing and technical specifications. Spec. No.: MORT & H – 2000 & 2200

15 / 25 MORTH 2000

Supplying, fitting and fixing in position Metric true to line and level sliding plate bearing Tonne with stainless steel plate sliding on stainless steel plate with mild steel matrix complete including all accessories as per drawing and technical specifications. Spec. No.: MORT & H – 2000 & 2200

232.00

11.00

16 / 25 MORTH 2000

Supplying, fitting and fixing in position Metric true to line and level POT- PTFE bearing Tonne consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel / fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part I & II respectively and other parts conforming to BS:5400, section 9.1 & 9.2 and clause 2006 of MORTH Specifications complete as per drawing and approved technical specifications. Spec. No.: MORT & H – 2000 & 2200

218.00

11.00

17 / 25 MORTH 2700

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and technical specifications. Spec. No.: MORT & H – 2700

9996.00

892.00

18 / 25 MORTH 500

Providing and laying 12mm thick mastic Square asphalt. wearing course on top of deck Meter slab excluding prime coat with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 9.5 mm nominal size at the rate of 0.005 cum per 10 Sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of

372.00

54.00

Cubic Meter

surfaces not less than 100 deg. C, protruding 1 mm- to 4mm over mastic surface, all complete as per clause 515. Spec. No.: MORT & H – 500, 2700 19 / 25 MORTH 2700

Construction of precast RCC railing of Running M30 Grade, aggregate size not Meter exceeding 12 mm, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. Spec. No.: MORT & H – 2700, 1500, 1600 & 1700

1610.00

118.00

20 / 25 MORTH 2700

Construction of RCC railing of M30 Running Grade, in-situ with 20 mm nominal size Meter aggregate true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500,center to center spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete with fully automatic micro processor PLC with SCADA enabled reversible Drum Type mixer. as per approved drawings and technical specifications. Spec. No.: MORT & H – 2700, 1500, 1600 & 1700

1622.00

118.00

21 / 25 MORTH 1700

Providing and laying in PCC M-15 Grade leveling course below approach slab complete with fully automatic micro processor PLC with SCADA enabled reversible Drum Type mixer. as per drawing and Technical specifications Spec. No.: MORT & H – 1700 & 2700

Cubic Meter

4440.00

483.00

22 / 25 MORTH 1500

Providing and laying of Reinforced cement concrete in M-30 grade approach slab including reinforcement and formwork complete with fully automatic micro processor PLC with SCADA enabled reversible Drum Type mixer. as per drawing and Technical specifications. Spec. No.: MORT & H – 1500, 1600, 1700 & 2700

Cubic Meter

8737.00

483.00

23 / 25

Precast – pretensioned Girders Providing

Cubic

23588.00

2476.00

MORTH 1800

precasting, transporting and placing in position precast pretensioned concrete girders as per drawing and Technical specifications. Spec. No.: MORT & H 1800, 2300

24 / 25 MORTH 2800

Painting on concrete surface Providing and applying 2 coat of water based cement paint to un plastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying plaint of 1 litre for 2 Sq.m. Spec. No.: MORT & H 2800,

Square Meter

124.00

16.00

25 / 25 MORTH 2600

Burried Joint -Providing and laying a Running burried expansion joint, expansion gap Meter being 20 mm, covered with 12 mm thick, 200 mm wide galvanized wieldable structural steel plate as per IS: 2062, placed symmetrical to center line of the joint, resting freely over the top surface of the deck concrete, welding of 8 mm dia. 100 mm long galvanised nails spaced 300 mm c/c along the center line of the plate, all as specified in clause 2604. Spec. No.: MORT & H 2600

1276.00

5.00

26i / 25 MORTH 2600

Providing & filling 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical specification. Spec. No.: MORT & H – 2600

Running Meter

443.00

5.00

26ii / 25 MORTH 2600

Providing and filling joint sealing Running compound as per drawing and Technical Meter specification with coarse sand and 6% bitumen by weight. Spec. No.: MORT & H – 2600

24.00

5.00

27 / 25 MORTH 2600

Asphaltic plug joint - Providing and laying Running of asphaltic plug joint to provide for Meter horizontal movement of 25 mm and vertical movement of 2 mm, depth of joint varying from 75 mm to 100 mm, width varying from 500 mm to 750 mm in traffic direction Covered with a closure plate of 200 mm X 6 mm of wieldable structural steel conforming to IS:2062, asphaltic plug to consist of polymer modified bitumen binder, carefully selected single size aggregate to 12.5mm nominal size and a heat

1045.00

38.00

Meter

resistant foam caulking /backer rod, all as per approved drawings and specifications. Spec. No.: MORT & H – 2600 28 / 25 MORTH 2600

Elastomeric Slab Steel Expansion Joint Running 10246.00 (Providing and laying of an elastomeric Meter slab steel expansion joint, catering to right or skew (less than 20 deg., moderately curved with maximum horizontal movement upto 50 mm, complete as per approved drawing and standard specifications to be installed by the manufacture / supplier or their authorized representative ensuring compliance to the manufactures instructions for installation for road & bridge works) Spec. No.: MORT & H – 2600

43.00

29 / 25 MORTH 2600

Compression Seal Joint - Providing and Running laying of compression seal joint Meter consisting of steel armoured nosing at two edges of the joint gap suitably anchored to the deck concrete and a preformed chloroprene elastomer or closed cell foam joint sealer compressed and fixed into the joint gap with special adhesive binder to cater for a horizontal movement upto 40 mm and vertical movement of 3 mm. Spec. No.: MORT & H – 2600

3262.00

27.00

30 / 25 MORTH 2600

Strip Seal Expansion - Providing and Running 10503.00 laying of a strip seal expansion joint Meter catering to maximum horizontal movement upto 70 mm, complete as per approved drawing and standard specifications to be installed by the manufacturer / supplier to their authorized representative ensuring compliance to the manufacturers instruction for installation. Spec. No.: MORT & H – 2600

27.00

31 / 25 MORTH 2500

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specifications. -- Boulder laid without wire crates. Spec. No.: MORT & H-2500

Cubic Meter

847.00

212.00

32 / 25 MORTH 2500

Boulder apron laid in wire crates Providing and laying of boulder apron laid in wire crates made with 4 mm dia G.I. wire conforming to IS:2801 & IS:4828 in 100 mm X 100 mm mesh(weaved diagonally ) including 10% extra for laps and joints laid with stone boulder weighing not less than 40 kg each. Spec. No.: MORT & H-2500

Cubic Meter

1579.00

269.00

33 / 25 MORTH 2500

Cement concrete blocks (size 0.5 X0.5X0.5 m)- Providing and laying of apron with cement concrete blocks of size 0.5 X0.5X0.5 m cast in-situ and made with nominal mix of M-15 grade cement concrete with a minimum cement content of 250kg/ cum with fully automatic micro processor PLC with SCADA enabled reversible Drum Type mixer. as per IRC:21-2000.) Spec. No.: MORT & H-2500

Cubic Meter

4526.00

591.00

34a / 25 MORTH 2500

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. -Stone/Boulder Spec. No.: MORT & H-2500

Cubic Meter

743.00

266.00

34b / 25 MORTH 2500

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete with fully automatic micro processor PLC with SCADA enabled reversible Drum Type mixer. as per drawing and Technical specifications. -- Cement Concrete blocks of size 0.30x 0.30x0.30 m cast in cement concrete of Grade M15 Spec. No.: MORT & H-2500

Cubic Meter

4208.00

537.00

35 / 25 MORTH 2500

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specifications. Spec. No.: MORT & H-2500

Cubic Meter

1030.00

430.00

36 / 25 MORTH 700

Geotextile Filter -Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to

Square Meter

856.00

109.00

prevent escape of the embankment material through the voids of the stone pitching / cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching. Spec. No.: MORT & H – 700 & 1500 37a / 25 MORTH 2500

Providing and laying Flooring complete as per drawing and Technical specifications laid over cement concrete bedding.-- Rubble stone laid in cement mortar 1:3 Spec. No.: MORT & H –2500

Cubic Meter

4045.00

1021.00

37b / 25 MORTH 2500

Providing and laying Flooring complete as per drawing and Technical specifications laid over cement concrete bedding.-- Cement Concrete blocks Grade M-15 Spec. No.: MORT & H –2500

Cubic Meter

5637.00

773.00

38 / 25 MORTH 2500

Construction of dry rubble Flooring at cross drainage works. Spec. No.: MORT & H – 2500

Cubic Meter

1558.00

856.00

39a / 25 MORTH 2500

Construction of Curtain wall Complete as per drawing and Technical specifications.-- Stone masonry in cement mortar 1:3 Spec. No.: MORT & H – 2500

Cubic Meter

3161.00

847.00

39b / 25 MORTH 2500

Construction of Curtain wall Complete as per drawing and Technical specifications.-- Cement Concrete Grade M-15 Spec. No.: MORT & H – 2500

Cubic Meter

4361.00

537.00

40 / 25 MORTH 2500

Flexible Apron – Constructing of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall. Spec. No.: MORT & H – 2500

Cubic Meter

901.00

431.00

41 / 25 MORTH 2500

Gabian Structure for Retaining Earth Providing and construction of a Gabian structure for retaining earth with segments of wire crates of size 7 m X3 mX 0.6 m each divided into 1.5 m compartments by cross netting, made form 4 mm galvansed steel wire @ 32kg per 10 sqm having minimum tensile strength of 300 Mpa conforming to IS

Cubic Meter

1582.00

91.00

:280 and galvanizing coating conforming to IS:4826 woven into mesh with double twist, mesh size not exceeding 100X 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be tied with 4 mm galvanized steel wire Spec. No.: MORT & H-2500 42 / 25 MORTH 2500

Gabian Structure for Erosions Control, River Training works and Protection works - Providing and constructing gabain structures for erosion control, river training works and protection works with wire crates of size 2 m x 1 m X0.3 m each divided into 1 m compartments bycross netting, made from 4 mm galvanized steel wire @ 32 kg per 10sqm having minimum tensile strength of 300 Mpa conforming to IS: 280 and galvanizing coating conforming to IS 4826, wovan into mesh with double twist, mesh size not exceeding 100 mm x 100 mm, filled with boulders with least dimension of 200 mm, all loose ends to be securely tied with 4mm galvanized steel wire. Spec. No.: MORT & H-2500

3133.00

334.00

43 / 25 MORTH 2800

Removal of existing cement concrete Square wearing coat including its disposal Meter complete as per technical specification without causing any detrimental effect to any part of the bridge structure and removal of dismantled material with all lifts and lead up to 1000 m (Thickness 75 mm) Spec. No.: MORT & H-2800

153.00

39.00

44 / 25 MORTH 2800

Removal of existing asphaltic wearing coat comprising of 50 mm thick asphaltic concrete laid over 12 mm thick mastic asphalt including disposal with all lift and lead upto 100 m. Spec. No.: MORT & H-2800

Square Meter

120.00

28.00

45 / 25 MORTH 2700

Providing and laying Cement concrete wearing coat M-30 grade with batch mix type concrete mixer with SCADA including reinforcement complete as per drawing and technical specifications. Spec. No.: MORT & H – 2700

Cubic Meter

11549.00

902.00

46 / 25

Providing and laying of Reinforced

Cubic

10019.00

734.00

Cubic Meter

MORTH 1500

cement concrete in M-30 grade approach slab including reinforcement and formwork complete with batch mix Type concrete mixer with SCADA. as per drawing and Technical specifications. Spec. No.: MORT & H – 1500, 1600, 1700 & 2700

Meter

6: SURVEY WORKS

SECTION 26 SURVEY SCHEDULE OF RATES FOR THE YEAR 2014-2015

For Pune, Solapur, Satara, Sangli and Kolhapur Districts

Sr.

Item of Work

Unit

No.

Rate For the year 2014-2015

1

2

3

4

A) REQUIREMENT OF LABOUR FOR UNIT WORK I) ROAD SURVEY 1)

Day

4 Nos.

2)

Reconnaissance survey of alignment in plain and hilly country including taking dimensions of apexes ascertaining type of land etc.complete (without chaining) - do – (with chaining)

Day

7 Nos.

3)

Levelling

Day

3 Nos.

4)

Chain and compass or cross staff survey

Day

6 Nos.

II) STREAM SURVEY 1)

Catchment area survey up to 100 acres with chain and compass. (Traverse

Day

2 Nos.

Day

2 Nos.

Day

9 Nos.

Day

6 Nos.

survey) 2)

-do- on village map upto 10 acres by visualization

without

chain

and

compass. 3)

4)

Leveling for contouring of sections of longitudinal sections of reams including chain and compass survey and other details of stream. Chain and compass or cross staff survey.

Item of Work

Unit

Rate For the year

Sr.

2014-2015

No. 1

2

3

4

B) REQUIREMENT OF MATERIALS ON UNIT BASIS 1]

Paint 1 Tin of 100 M.L.

Km.

2 Tins

2]

Chunnam loose

Km.

2 Kgs.

3]

Pegs

Km.

65 Nos.

4]

Kerosin Oil

Month

6 Litres

5]

Torch Cell (1 ½ V)

Month

3 Cells

C) UNIT OUTTURN PER DAY

1]

Survey party consisting of 2 or 3 overseers and 1 Attendant for item to 10 under. Roads and Item 1 to 6 under

2] Streams

Sr.

Unit

Item of Work

No.


1

2

3

4

I] ROADS 1]

Reconnaissance survey of alignment a road in plain country including taking 3 dimensions of apexes indicating type of land etc. along with alignment and verification of serial Nos. (without chaining)

Day

2 Kms.

2]

- do – (with chaining)

Day

1.50 Kms.

3]

Reconnaissance survey of a road alignment for new hilly road country (without chaining).

Day

1.50 Kms.

4]

- do – including taking 3 dimensions of apexes indicating type of land and verification of survey No.(with chaining)

Day

1.00 Km.

5]

Reconnaissance survey of a alignment of a road in hilly country utilizing existing forest tracks.(without chaining) Reconnaissance survey of a alignment of a road in hilly country utilizing existing dimensions of apexes indicating type of land etc. along the

Day

1.50 Kms.

Day

1.00 Km.

6]

alignment and verification of survey No. etc. (with chaining) 7]

Detailed survey of road in plain country including chaining (with cross sections at every 2 chain) and closing of survey each day.

Day

1.50 Kms.

Sr.

Item of Work

Unit

No.


1

2

3

4

8]

Detailed survey in plain country (along earthwork one including chaining with cross section at every 2 chain and Closing survey at close of day.

Day

0.75 Km.

9]

Detailed survey for a new hilly road along utilizing existing forest track (Without cross sec.) but inclusive

Day

0.50 Km.

Day

0.40 Km.

Day

1.50 Kms.

Day

5 Kms.

Day

3 Nos.

of Closing survey each day. 10] Taking cross section for a road in hilly country along the alignment including chaining leveling and closing of survey of the close of day. (Note : Length should be worked out on the No. and actual length of cross sec. Taken.)

II] STREAM 1]

2] 3]

Longitudinal and cross section of stream complete with leveling and chaining including closing survey at the end of work Purely fly leveling (if required) (To and From) Finding out catchment area with traverse survey upto 100 acres not traceable on topo sheet (and upto 1 sq.

4]

5]

Mile on site) Finding out catchment area with traverse survey above 100 acres not traceable on topo sheet (and upto 1 sq.mil on site) Fixing chain and apex stones long the road (on an average 4 to 5 chain stones and 5 to 6 apex stones in a length of 1 km.) for unit labour

Day

2 Nos.

Day

0.75 Kms.

Sr.

Item of Work

Unit

No.

1

Rate for the year 2014-2015

2

3

Completed

Labour

4

5

D) LABOUR COST FOR VARIOUS ITEMS OF SURVEY 1)

2)

2 A)

3)

Fixing chain/BM / Centering / Apex stones in earth and all sorts of soil and soft murum including conveying excavation fixing stone and back filling etc. complete. (As per rate analysis No.1) Taking the trial pit for roads, alignment, C.D.works in earth soil of all sorts sand, gravel or soft murum including stacking the excavated material including all lifts and necessary back filling upto depth 1.5 meters (1/BDA-1,DSR 2008-09) 75 x 1.5 Taking the trial pit for roads, alignment, C.D. works in earth soil of all sorts sand, gravel or soft murum including stacking the excavated material including all lifts and necessary back filling upto 3.00 meters depth.(1BDA-2, DSR 2008-09) 80 x 1.5 -do- in hard murum upto 1.5 meter depth.

No.

73.00

73.00

Cum.

180.00

180.00

Cum.

218.00

218.00

Cum.

312.00

312.00

3A)

–do- upto 3 meter depth.

Cum.

335.00

335.00

4)

-do- in hard murum and boulders 1.5 meter depth.

Cum.

417.60

417.60

–do- upto 3 meter depth.

Cum.

417.60

417.60

4 A)

5)

Fixing survey pegs in earth soil of all sorts, sand gravel or soft murum etc. complete.

Sr.

Item of Work

100 Nos.

Unit

No

98.80

98.80

Rate for the year

2014-2015

.

1

3

2

Completed

Labour

4

5

E) RATES OF COMPLETED ITEMS INVOLVED DURING SURVEY I] SURVEY ITEMS 1]

Reconnaissance survey of road alignment in plain country including taking 3 dimensions of apexes including verification of type of land etc. along the alignment etc. complete(without chaining)

Km.

1170.40

494.00

2]

-do- (with chaining)

Km.

2219.00

1317.00

3]

Reconnaissance survey of a alignment for new hilly road utilizing existing forest cart tracks with use of Ghat Tracer (if found necessary ) taking three dimensions of apexes including verification of type of land etc. complete. (without chaining)

Km.

2658.00

1756.00

4]

Reconnaissance survey of a alignment for new hilly road utilizing existing forest cart tracks with use of Ghat Tracer (if found necessary ) taking three dimensions of apexes

Km.

3499.60

1975.70

including verification of type of land etc. complete. (with chaining) 5]

Reconnaissance survey of road alignment in hilly road utilizing existing forest cart tracks with use of Ghat Tracer (if found necessary )taking three dimensions of apexes including verification of type of land etc. complete. (without chaining)

Km.

1393.30

658.60

Sr. Item of Work

Unit

No

Rate for the year

2014-

2015 Complete

Labour

d

1

2

3

4

5

6]

–do- (with chaining)

Km.

3328.60

1975.70

7]

Detailed survey of roads in plain country including chaining and leveling with cross section at every two chains inclusive of closing survey each day.

Km

3370.5

2194.70

Detailed survey of road length where earthwork is party done including chaining and leveling with cross section at every two chain and closing survey each day.

Km

9] Detailed survey of road through hilly country taking cross section at every chain or as per desired including chaining leveling and closing survey each day

Km

6126.50

1646.40

10]

Km

4594.0

1234.00

8]

–do- utilizing existing forest tracks

0

3252.5

1053.70

0

0 11]

Providing and fixing wooden survey pegs including White washing etc. complete.

Km.

413.10

65.00

12]

N

Carrying out Catchment area traverse survey of minor stream (not traceable in toposheet) below 100 acres.

Km.

Item of Work

1142.4

466.50

0

Unit

o.

Rate for the year

2014-2015

Completed

Labour

1

2

3

4

5

13]

Cutting down branches of trees bushes etc. stacking the material neatly as directed. (for Jeep able road)

Km.

8700.00

8700.0

Preparation of Land Plans for Land Acquisition (Road Work )Preparing land plans and land Schedule including carrying out plan table survey for private / Forest land on both side of road in Rural and Urban areas. The work of plotting and certificate from D.I.L.R. or other authorities shall be obtained for correctness of prepared plans, tracing and taking out prints and preparing the requisite booklets duly bound and printing with all materials etc. Three land plan booklets in prescribed form along with original tracing shall be supplied including procurement of village maps / forest land plans from concerned Authorities.

Per

14]

0 25207.00

Km.

Note :-The item plane table includes following points.

6664.0 0

1] Carrying plane table Survey. 2] Plotting of duly surveyed area 3] Collection of data from D.I.L.R. Authorities and verification of survey maps

by

D.I.L.R. Authorities

4] Preparing three

Booklets of Survey

maps ,including taking out prints of Survey maps, binding etc

5] Carrying out plan table Survey of

the

private / forest land, along the road upto 30 Mtrs. on either side from the road center Sr. Item of Work

Unit

No

Rate for the year

2014-

2015 Complete

Labour

d

1

2

15]

Providing detailed layout plan of area in scale 1:500 including carrying out contour survey& detailed Engineering plane table Survey with the help of 20”. The

3

4

5

dolomite area measurement of the plot and structures, trees, over head line and under ground service amenities within the area, with triangulation method and giving details of the structures, such as total area, type of building & distance from all corners taking trial pit 0.5 x 0.5 x 2.00 m. – 2 Nos. per Acre and collection of record from city survey /D.I.L.R. authorities and authentication. The plan shall be traced on 75 micron polyester film and shall be submitted along with three Ammonia Prints. The contour levels shall be marked at 0.5 Meter intervals. Note :- The item includes— 1] Traversing work with theodolite and steel tape. 2] Leveling Grid work of the terrain. 3] Detailed Engineering Survey contouring work of the terrain.

and

4] Plotting work. 5] Collection of R

Sr.

a) For 10 Gunthas to 1 Acre

Acre

5669.00

2267.60

b) For Area above 1 Acre.

Acre

6236.00

2494.00

Item of Work

Unit

Rate for the year

2014-

No

2015 Complete

Labour

d

1

2

3

4

5

16]

Reconnaissance survey including study of survey sheets maps etc. For alignment including 3 dimension or apexes , fixing pegs, chain and compass or cross staff survey with L-section and cross section of alignment at every 30 M . or at every change of indiviation which ever is less including fly levels at close of days work, fixing apex and B.M. stones of size 0.15 x 0.15 x 0.60 in 1:2:4 C.C.at every 200 M. and preparation of alignment plan and all type of compliance if required from Department.

Km.

17006.0

4843.00

Preparation of detailed Plans and Estimates of road including typed in 5 Copies, ammonia prints, with coloring of plans, proper filling, indexing and paging etc. complete and all types of compliance, if required from Department.

Km.

Survey of C.D. works including taking LSection of Road, Catchment area plan by Traverse method and taking trial pits of size 1.50 M x 1.50 M 1.50 M including preparation of detailed plans and estimates in 5 copies and all types of compliance if required from the Department.

Per

8615.4

No

0

17]

18]

0

11327.0

---

0

2300.25

Sr.

Unit

Item of Work

No

Rate for the year

2014-

2015 Complete

Labour

d

1

2

3

19]

Survey of Minor bridge including taking LSection of nalla existing road two defined, cross sections, one at U/s and one at D/s, one vergin cross section, one alternate proposed cross section of stream upto sufficient length with chain and compass, taking three trial pits of size 2.00 x 2.00 x 3.00 M. collecting samples of bed materials at site for ascertaining the silt factor, unit test, specific gravity from Govt. approved laboratories and preparation of detailed survey data submission of the project duly typed coloring of the ammonia prints, site plan and other drawings etc., complete and all types of compliance, if required from department.

Per

42374. 13617.00

No

00

20]

4

5

Survey of Major bridge including taking L- R.mt. 1108.00 386.80 Section of nalla existing road, two defined cross sections (one at U/s and one at D/s, one alternate proposed cross section of stream up to sufficient length with chain and compass, taking trial pits one in bed, two on banks of size 2.00 x 2.00 x 3.00 M. collecting samples at site

for

ascertaining the silt factor, unit test, specific gravity from Govt. approved

laboratories (including testing charges) and preparation

of

detailed

survey

data

submission of the project duly typed colouring of the ammonia prints, site plan and other drawings etc., complete and all types of compliance, if required from department. (Excluding taking trial bores and contouring) upto 75 mt. Note:- For additional length increase 10% upto 200 m. and 15% above 200 m.

Sr.

Unit

Item of Work

Rate

No

for the year

2014-

2015 Complete

Labour

d

1

2

3

4

5

21]

Contour survey of stream U/s and D/s of proposed bridge site including leveling, chain and compass survey at every 30 M x 30 M. preparing contour map with ammonia prints etc. complete in 5 sets.

One

71600.0

35280.00

sq.

0

Survey of raised causeway including reconnaissance, taking L-section of existing road one defined, one vergin, one alternate proposed cross section of stream upto sufficient lengths with chain and compass taking two trial pits of size 1.50m x1.5m x1.50m, ascertaining silt factor and preparation of detailed survey data, submission of the project duly typed colouring of the ammonia prints, site plan &other drawing etc. complete & all types of compliance, if required from department.

Per.

Preparation of detailed plans and estimates

One

of Raise causeway on the basis of the

No.

22]

23]

approved detailed survey data by competent authority including typing in 5 copies ammonia prints, site plan other drawings with colouring of plans, proper filling, indexing and pegging, etc. complete and all

km.

No.

31378.6 8479.55 0

7990.70 --

types of compliance if required from department.

Sr.

Unit

Item of Work

No

Rate for the year

.

2014-2015 Comple

Labour

ted

1

2

3

4

5

II] SURVEY OF MEDIUM C.D.WORKS 1]

Complete survey of stream having catchment area up to 1 sq. mile including catchment

survey

L.S./C.S.

and

complete.

taking other

necessary

details

etc.

No.

4189.7 1560.00 0

2] Complete survey of stream having

No.

catchment area above 1 sq. Mile and up

10060.0 1560.00 0

to 5 sq. Miles including taking necessary L.S./C.S. and other details etc. complete in all respects

III] SURVEY OF MAJOR STREAMS 1]

Reconnaissance survey of alignment in

Km.

988.00

494.00

2] Fly leveling for carrying out bench mark

Km.

767.00

220.00

3] Detailed survey of approaches including

Km.

2221.00 1317.10

plain country for approaches to the bridge including taking three dimensions of apexes. (without chaining)

chaining and leveling inclusive of chain and

compass

survey

along

bridge

alignment and approaches including closing each days work.

4] Taking longitudinal section of streams extending upstream and down stream side of the bridge site, requisite number of cross section of the street on either sides block contouring and other details etc. complete. (Length of L.S. and C.S. for contouring to be worked out)

Km.

2241.0 1475.0 0

0

Sr.

Unit

Item of Work

No

Rate for the year

.

2014-2015 Complete

Labour

d

1

2

3

5] Demarcation of right of way (ROW) as

4

5

Km.

6613.00 1308.00

Km.

2530.8

per design using total station including calculation of co-ordinates of 30 meter internal on both sides of road.

6] Preparation

of

Land

Acquisition

proposed including collection of 7/12 and 8/A documents marking alignment on

village

maps,

area

calculation,

preparation of proposal, printing, binding etc. complete and submission of 5 sets more ever liaison and co-ordination with Revenue authorities with compliance if any until finalization of a ward.

0

--

7]

Joint measurement of the alignment by the P.W.D. and department of land records liaison and co-ordination

a] For New alignment

Km.

8887.0 2030.00 0

b]For existing alignment

Km.

7298.0 1471.00 0

Sr.

Unit

Item of Work

No

Rate for the year

.

2014-2015 Complete

Labour

d

1

2

3

4

5

8] Carrying of detailed topographic survey by using total station along the existing or new road including taking L-section and cross section at every 30 meter Row, taking at least 10 spot levels per cross section, picking up all existing details inside the Row like electric telephone lines, encroachments, structures etc. connecting all the primary total station control points by G.I.S. Bench marks level

or

whichever

department

using

available auto

level

with and

preparing AutoCAD plan by using (xyz) co-ordinates using above data taking out one set of black white printout on 50 micron polyester film sheet A2 size and two sets of coloured printouts on white sheet A2 size submitting soft copy of all data on C.D. A] Plain Terrain New alignment

Km.

24291.0 8443.00 0

B) Plan Terrain Existing alignment

Km.

25229.

8682.00

00 C] Hilly Terrain New

9] Demarcation of road boundary (ROW) including fixing boundary stones of standard size and shape including fixing in block of standard size of C.C. of 1:4:8 white washing at 30 meter internal on both side.

Km.

Km.

33502.

13376.0

00

0

30445. 6156.00 00

Sr.

Item of Work

Rate

Unit

No

for the year 2014-2015

.

Complete

Labour

d

1

3

2

4

5

F] TAKING 100 MM DIA TRIAL BORES FOR ASCERTAINING STRATA (Note:- The following rates (Item No.1 to 3) are approved by the Chief Engineer, Mechanical / Irrigation Department, Nashik for 2010-2011)

1]

Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia over burden (by diamond drilling machine) such as soil of all sorts, soft murum, hard murum and boulders and in soft rock including all materials such as casing pipes and accessories oil, grease, steel, roads, and such

other

materials

as

required

(including conveying the material to site of work) preserving the loose samples in glass jar and core samples serially on site of work and conveying the same to H.Q. of concerning office as directed

0 to 50 meter (Page No.21, Item

1171.6 0

No.22.1) 2] Taking trial bores 75 to 100 mm for 53.0 to 88.9 mm core dia in rocks as specified below including all necessary materials such as oil, grease, steel bootsan and such other materials as required

Rmt.

(including

conveying

the

materials to the site of work) and preserving the core samples serially duly marking and maintain the footage on site of work and conveying the same to H.Q. of the concerned office as directed.

--

Sr.

Item of Work

Rate

Unit

No


.

1

2 a] Quartzite with diamond drill with Bx Bit i]

Completed

Labour

3

4

5

Rmt.

3154.80

--

Rmt.

2812.70

-

Rmt.

2291.30

-

No.

3152.00

--

No.

8635.35

0 to 50 meter (Page No.20, Item

No.22.3) b] Quartzite w i] 0 to 50 meter (Page No.20, Item No.22/4) with diamond drill with Ax Bit =2435*10% 2678.00 c] Other rock with diamond drill 0 to 50 meters ((Page No.21, Item No.22.5) =1980*10% =2178.00 3] Providing tun tappa core boxes of jungle wood of size 1.25m x 0.35m x 0.15m for preserving core samples with all fixtures and fastening handles including locking arrangement etc. complete. 4] Providing

and

maintaining

temporary

platform at bore location in river bed in upto 1 mtrs. Of standing water of size 3.50 x 4.00 m by using sand bags in layers for platform including all required materials, labours etc. complete.

5] Providing

and

maintaining

temporary

platform for erecting boring machined in river bed to the depth of standing water 1 mtr. To 2 mtrs of size 3.50 m x 4.00 m by using 20 Nos. of M.S. empty barrels in M.S. Frame made upto M.S. angle size 50x50x5 mm with fabrication and over it a jungle wood planks platform of size 50x50x5 mm with fabrication and over it a jungle wood planks platform of size 3.50x4.00x0.03m size including supplying of nylon rope 24mm size for anchoring platform include passage platform and engaging a labour etc. complete No.

a)-do- 1 M to 2 M.

13317.4 0

No.

b)-do- 2 M. and above

14660.7 0

Sr. No

Item of Work

Unit


. Completed

Labour

1

2

6]

Providing and maintaining temporary No. platform for inspection from one bank to another bank or bore location in river bed in all depth of standing water of size 1.3x2.0 m. by using 4 M.S. empty barrels in M.S. frame made up of M.S. Angle size 50x50x5 mm with fabrication and over it a jungle wood planks platform of size 1.3x2x0.003 m size including supplying of Nylon rope 24 mm size & 300 meter length for movement of platform Engaging a labour on inspection days etc. complete. Conveying the boring machine and Km. engine and all its accessories etc. to the site of work and back including loading unloading etc. complete. Rate mechanical. (Note:- Distance to be measured from

7]

3

4

5

12107.20

57.00

--

4042.00

4042.0

the station of boring machine, engine, etc. of District head quarters to site of work (by short rout) 8] Shifting boring plant with all its

Per

components and reinstalling the same at Shift the directed place including all its charges etc. complete. (Note:- Distance to be measured from the station of boring machine, engine, etc. of District head quarters to site of work (by short rout)

0

Sr.

Item of Work

Rate

Unit

No


. Completed

Labour

3

4

5

9] Providing detailed report of Inspection

Per

5500.00

-

logging of drilled hole by observing

No.

1

2

visual description of data as per depth, thickness of layer, type of sample, wash sample, core recovery type of drill etc. complete.

10] Providing detailed Geological report of

Per

proposed site by mentioning geo

No.

technical investigation of subsurface stratification collecting soil, rock and ground water samples for laboratory tests

to

parameters.

arrive

foundation

design

Rock properties such as

type of rock , jointing, fractures etc. complete with suggestion about the site foundations and remedies.

25000.00

--

G) SURVEY SCHEDULE OF RATES FOR THE YEAR 2014-2015 Sr.

Item of Work

Rate

Unit

No


.

1

2

3

Completed

Labour

4

5

1]

Preparing land plans and land schedule including carrying out plane table survey for Private / Forest land or both side of road in Rural and Urban areas. The work of plotting and certificate from T.I.L.R. or other authorities shall be obtained for correctness of prepared plans. Tracing and taking out prints and preparing the requisite

booklets

duly

bounds

printing with all materials etc.

ad

Three

land plan booklets along with original tracing shall be supplied including procurement of village Maps / Forest land plans rom concern authorities. Note: - The item plane table includes following points. 1] Carrying out plane table survey. 2] Plotting of duly surveyed area. 3] Collection of data from T.I.L.R. Authorities and verification of Survey maps by T.I.L.R. Authorities. 4] Preparing three booklets of survey maps ,including taking out prints of Survey maps, binding, etc. 5] Carrying out plane table survey of the Private / Forest land along the road upto 30 mtrs. on either side from the road center.

Km.

24559.0

--

Sr.

Item of Work

Rate

Unit

No

for the year 20142015

.

Complete

Labour

d

1

2

3

4

5

2]

Providing in actual services for the preparation Km. of record of rights change of title in the name of PWD including collection of notification u/s 3(D).

Award copy, joint measurement plan,

land schedule as per joint measurement, possession receipt, land revenue reduction order from competent Authority for preparation of kami-jast Patrak (K.J.P.) from T.I.L.R. conducting meeting, with T.I.L.R. staff. Site inspection if required and preparing kami-jast Patrak

from

competent

T.I.L.R.

authority

and

submitted

along

with

to joint

measurement sheet, land schedule. According KJP which is prepared by T.I.L.R. submitted to Sub-Divisional Magistrate for taking order of land revenue reduction order and preparation of the form No.6 (Order of form No.6) submitted to Circle, Talathi to prepare the 7/12 extracts in the name of Authority i.e. PWD for all villages coming in the length. Item includes following activities :i] Consulting all T.I.L.R. offices (Taluka Investigation and Land Record Office.)

36075

ii] Consulting Competent Authorities office at District Level.

iii] Total length covered. iv] Villages included. v] Office of Sub-Divisional Magistrate @ City Survey Office. vi] Circle office and Talathi Office for all villages. vii] Period for completion of this process – Six Month (Rate Analysis)

Sr.

Unit

Item of Work

No

Rate for the year

2014-2015

.

1 3

2 Geometrical horizontal

design on and

vertical

of curves

road at

design speed specified by IRC including carrying out trail for optimization of civil cost minimizing land acquisition

Completed

Labour

3

4

5

Km.

5904.00

-

and maximum use of existing facility and

preparation

arrangement drawing

of

widening for existing

structures stake out date for horizontal alignment and working levels including super elevation effect etc. complete.

4

Transferring and staking out design on

Km

9967.00

-

Km

4484.00

-

co- ordinates of base line on ground using nails for existing road surfaces and

survey pegs for new alignments

including stacking out co –ordinates for horizontal curves at required interval of 50 meters etc. complete ( extra line such as rights of way median edges to toe line not included)

5

Preparation of roadway drawing (plan and profile) on computerizing Auto CAD at required scale showing all topo future and proposed construction details such as carriage way median service road, toe lines, retaining walls, cross drainage works, major structures etc. complete.

Including

indexing,

level

tables, legend, basic information of project and design details etc.

Sr.

Unit

Item of Work

No


. Complet

Labour

ed 1

2

3

4

5

6

Preparation of Engineering drawing

Km

4231.00

-

No.

5996.00

-

as strip plan, widening scheme , index / key map, typical crosssection, furniture,

retaining general

walls,

road,

arrangement

drawings for bus bays / truck laybays / rest areas / toll plaza / booths and type drawing of pipe / slab drains etc. on computer using Auto CAD . 7

Survey of C. D. works including taking L-section of road, catchment area plan by Traverse method and taking and trial pits of size1.50 M X 1.50 M X 1.50 M including preparation of detailed plans and estimates in 5 copies and all types of

compliance if required from the department. 8

Design on of junctions including detail

layout

of

traffic

Km

20978.00

-

signs,

informatory board’s traffic islands. Breaks in median verge including working levels at junctions as per IRC standards etc. complete.

Sr.

Unit

Item of Work

No

Rate for the year

2014-2015

. Completed

Labour

1

2

3

4

5

9

Preparation of Initial design of

Km.

594.00

-

flyovers with preparing General Arrangement

drawing

with

dimensions. Grade of concrete etc. complete and preparation of rough estimate for all components of bridge. Including supplying four copies of colored drawings and copy

of drawing on C.D. (excluding geotechnical and structural design part).

10 Preparation of Draft / Final Report comprising of technical, financial economic

feasibility

and

environmental aspects of the project including executive summary and detailed chapters on necessity and introduction of project existing and future traffic, design philosophy scope of work, summary of available cost estimates justification for rates adopted ,key points of execution, salient features of the project , location of toll plaza, toll rate / policy

to

be

adopted

and

specification of major construction items etc. in 8 copies having attractive cover and binding as directed by engineer in charge etc. complete.

Km

239393.00

-

Sr. Item of Work

Unit

Rate for the

No

year

2014-2015

.

1

Labour

4

5

3

2 H)

1

Completed

Providing

NEW ITEMS

computer

software

-

generated drawing colour print of technical

drawing

for

Building/

Bridge/Roads./C.D.Works

in

required size etc. Complete

a)

A0 size

910 x1100

No.

175.00

b)

A1 size

910 x 609

No.

92.00

c)

A2 size

609 x 420

No.

58.00

d)

A3 size

420 x 297

No.

30.00

e)

2

A4 size

210 x 297

No.

18.00

Providing colour Xerox of print of technical Bridge/

drawing

for

Roads./C.D.

-

Building/ Works

in

required size etc. complete.

a)

A0 size

910 x1100

No.

162.00

b)

A1 size

910 x 609

No

90.00

c)

A2 size

609 x 420

No

42.00

d)

A3 size

420 x 297

No

21.00

e)

A4 size

210 x 297

No

11.00

7: Material Testing

Government of Maharashtra Vigilance & Quality Control Circle Pune/ Navi Mumbai/ Nasik/ Amravati/ Aurangabad & Nagpur

Schedule of Testing charges for Construction material used for Government Works for the Year 2014 - 15 (Effective from 01/07/2014) INDEX Sr. No.

Particelars

1

2

1) 2)

Important Notes Schedule of rate for construction material testing charges

Pages 3

4

2

2

3

8

Government of Maharashtra Vigilance & Quality Control Circle Pune/ Navi Mumbai/ Nasik/ Amravati/ Aurangabad & Nagpur

Schedule of Testing charges for Construction material used for Government Works for the Year 2014 - 15 (Effective from 01/07/2014)

Important Notes 1) The rate Included in this D.S.R. are applicable for all Divisions and Sub Divisions in P. W. D. Maharashtra State. For work executed in semi Government and Private establishments the rate shall be as per Government Guidelines Issued vide Circular No- AGR 1094/CR-76/N. H. 02 Mantralay,Mumbai - 400 032. (i.e.twice the rate mentioned in D. S. R.) 2) In order to achive informity in testing of material throughout Maharashtra State, tests have been classified as per requirement. 3) The field Officer will have to strictly adhere to the test frequency stipulated as per Government guideline.

GOVERNMENT OF MAHARASTARA Vigilance & Quality Control Circle Schedule of Testing charges for construction material used for Government Works for the Year 2014-15 Effective from 1/ 07/2014 and valid Upto 30 /06 /2015

Sr. No 1

1

Name of Test

Test

Rate Sanction ed Rs

2 BASIC TEST OF CEMENT.

3

4

1 Test

2800.00

1 Test

2000.00

1 Test 1 Test 1 Test 1 Test 1 Test 1 Test

500.00 900.00 650.00 600.00 1900.00 275.00

1 Test 1 Test

12000.00 12000.00

1 Test

1000.00

1 Test 1 Test

600.00 325.00

Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness BASIC TEST OF AGGREGATE.

2 3 4 5 6 7 8

Water Absorption, Specific Gravity. Impact Value /Crushing Value. Sieve Analysis. Abrasion Value. Flakiness Index & Elongation Index. Stripping Value. Soundness. Bulk Density.

9 10

MIX DESIGN. GSB Mix Design. Wet Mix Macadam Mix Design.

FINE AGGREGATES. 11 12 13

Fineness Modulus ( Sieve Analysis ), Silt & Clay Content Chloride & Sulphate Content. Moisture Content.

14 15

Bulkage of Sand . Silt Factor.

1 Test 1 Test

375.00 650.00

Sr.No

Name of Test

Test

Rate Sanction ed Rs

1

2

3

4

1 Test

1600.00

1 Test

1900.00

1 Test

1000.00

16

BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks).

FLOORING TILES (MOSSAIC / CEMENT) 17

18

Flexural test ( Set of 6 Tiles), Water Absorption ( Set of 6 Tiles). Resistance to wear ( Set of 6 Tiles). Flooring of Natural Stone (Kota,Marble, granite,Tandur.etc.)-Water absorption,Specific gravity

GLAZED TILES 19

Water Absorption(Set of 6 Tiles), Modulus of Rupture ( Set of 6 Tiles)

1 Test

1250.00

20 21

Determination of Impact Resistance. Determination of Chemical Resistance.

1 Test 1 Test

600.00 1000.00

1 Test 1 Test

1250.00 1000.00

CERAMIC TILES / VITRIFIED TILES

22 23

Water Absorption, Moduls of Rapture (Set of 6 Tiles) Determination of Chemical Resistance

MANGLORE TILES 24

Water Absorption (Set of 6 Tiles), Flexural test (Set of 6 Tiles).

1 Test

1150.00

25

Permeability.

1 Test

800.00

CONCRETE 26 27 28 29 30 31

32

Compressive Strength OF C.C. Cube(Set of 3 cubes). Concrete Mix Design (With all Tests on basic materials)* Flexural strength of Beam. Permiability Test. Concrete mix design by Accelerated curing method. (Boiling water method) Taking of core samples in concrete pavement. (Excluding Dead Journey Charges) Dead Journey Charges.

1 Test 1 Test

500.00 10000.00

1 Test 1 Test

600.00 1250.00

1 Mix Design

12000.00

1 Test

2200.00

Per Km

15.00

1 Test

3000.00

CONCRETE PAVING BLOCKS 33

Compressive Strength , Water Absorption, (Set of 8 Blocks), Flexural Test ( Set of 8 Blocks). Resistance to wear.( Set of 8 Blocks)

Sr. No

Name of Test

Test

Rate Sanction ed Rs

1

2

3

4

1 Test

500.00

1 Test

1500.00

1 Test 1 Test

500.00 325.00

MORTOR 34

Compressive Strength.( Set of 3 Cubes)

STONE/ RUBBLE 35

Crushing Value/Compressive Strength Water Absorption & Specific Gravity,

SOIL / MURUM 36 37

Sieve Analysis. Field moisture Content.

38 39 40 41

Liquid limit & plastic Limit. Compaction Test ( Proctor Density ). C.B.R. Test ( Lab ) Excluding compaction test. C.B.R. Test ( Field Determination Test) Excluding Transportation.As per IS 2720

1 Test 1 Test

850.00 1400.00

1 Test 1 Test

3900.00 2000.00

Per Km Per Km

15.00 54.00

1 Test 1 Test 1 Test

900.00 600.00 1700.00

1 Test 1 Test

25000.00 750.00

1 Test

2300.00


1500.00 700.00 1200.00

1 Test

2900.00

1 Test 1 Test

750.00 750.00

1 Mix

12000.00

Part XXXI

42 43 44 45 46 47 48

Dead Journey Charges,inspection Vehical Dead Journey Charges,Truck/Tipper Field Density by Sand replacement method. Sulphate & Chloride Contents. Mechanical Analysis. Plate Load Bearing Test. (Excluding Transportation) Free Swell Test for Soil. BITUMEN

49 50 51 52 53

54 55 56

57 58 59 60 61 62 63 64

65

Penetration, Softening Point, Flash & Fire Point, Specific Gravity Viscosity. Ducility / Elastic Recovery Extraction Test. Sieve Analysis of Bituminous mix (2 samples of extraction for one sieve analysis including extraction) Marshall Stability & Flow measurement. (Set of 3 moulds) Prepation of Marshall Mould. Job Mix Design with all Tests on aggregate (Excluding bitumen) for DBM/SDBC/AC. B. M. Mix Design with all Tests on aggregate (Excluding bitumen ) Mastic Hardness No. Thin film oven test & test on residue of modified bitumen. Sepration test for modified bitumen. Determination of Fines by Hydrometer. Matter soluble in Trichloroethylene. Density of Bituminous Mix Mould.(Set of 3 moulds) Taking of core samples in bituminous flexible pavement. (Excluding Dead Journey Charges) Dead Journey Charges.

Design 1 Mix

5500.00

Design

1 Test 1 Test

500.00 2500.00

1 Test 1 Test 1 Test 1 Test

1300.00 900.00 900.00 450.00

1 Test

2200.00

Per Km

15.00

Sr.No

Name of Test

Test

Rate Sanction ed Rs

1

2

3

4


450.00 300.00 450.00

1 Test

1500.00

1 Test

850.00

1 Test

800.00

1 Test

2000.00

1 Test

2600.00

1 Test

400.00

BITUMINOUS EMULSION 66 67 68

% Residue Test Particle charge Test Sieve Test

HOLLOW BLOCKS/ SOLID BLOCKS 69

Density Test . (Set of 3 Blocks ) Compressive Strength. (Set of 8 Blocks ) Water Absorption Test .( Set of 3 Blocks )

WATER 70

PH Value, Sulphate & Chloride Content.

WOOD 71

Density, Moisture Content.

FLUSH DOOR

72

Knife Test, Adhesion Test, End Immersion Test.

PLYWOOD 73

74

Determination of Resistance to dry heat, Determination of Moisture Content, Determination of Density, Thickness of Plywood, Test for Glue Adhesion PARTICAL BOARD

75

Determination of Moisture Content, Determination of Density

1 Test

1200.00

1 Test 1 Test

500.00 600.00

1 Test

700.00

ALUMINIUM SECTION 76 77

Thickness, Mass Per Running meter, Test on Powder Coating

POLYMER MATERIAL 78

PH Value, Solid Content

Sr.No

Name of Test

Test

Rate Sanction ed Rs

1

2

3

4

1 Test 1 Test

550.00 400.00

1 Test 1 Test

550.00 300.00

1 Test

200.00

1 Test

250.00

1 Test

200.00

1 Test

900.00

A.C. PIPES 79 80

Water Absorption Bursting Strength

A.C. SHEETS 81 82

83 84

85

86

Water Absorption, Load Bearing G.I. PIPES Weight per running meter, Diameter of pipe & wall thickness of pipe, Weight of Zinc coating per sq. m.

P.V.C. PIPES (NONPLASTISIZED) Weight per running meter, Diameter of pipe & wall thickness of pipe

STEEL ANTI CORROSIVE TEST Resistance to applied Voltage. ( 1 Hr. Test

)

87 88 89 90 91

92 93

(Set of 2 Bars) Resistance to applied Voltage.( 30 Days Test ) ( Set of 2 Bars ) Thickness of Coating. (Set of 2 Bars) Chemical Resistance Test.( Set of 8 Bars ) Hardness of Coating Test . Salt Spray Test ( 4 Cycles ) ( Set of 2 Bars )

STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

94

Nitrol Solution Test. (Set of 3 Bars)

95 96 97 98 99

Glass bead contents & grading analysis. Reflectance & yellowness index. Flowability.(Percentage residue). Softening Point. (Ring & ball method). Drying Time.

1 Test

2500.00

1 Test 1 Test 1 Test 1 Test

450.00 1900.00 250.00 1200.00

1 Test 1 Test

900.00 1200.00

1 Test

3100.00

1 Test 1 Test 1 Test 1 Test 1 Test

3100.00 900.00 800.00 800.00 650.00

PAINT / THERMO-PLASTIC PAINT

Sr.No

Name of Test

Test

Rate Sanction ed Rs

1

2

3

4

1 Test 1 Test 1 Test 1 Test 1 Test 1 Test

650.00 600.00 250.00 400.00 400.00 850.00

100 101 102 103 104 105

COAL TAR EPOXY PAINT Drying Time. Dry Film Thickness. Flexibility. Gel Time. Pot Life. Volume of Solid.

ROAD SIGN BOARD 106

Retro Reflective Test.

1 Test

3200.00

Per Km Per Km

560.00 1120.00

Per Km Per Km

560.00 15.00

Per Km

11300.00

1 Point 1 Point

150.00 250.00

ROUGHNESS INDEX / ROAD UNEVENNESS TEST 107 108 109 110

111

Road Surface Single Lane.(3.70 to 5.50 m) Road Surface 1.5 Lane to Two Lane.(5.50 to 7.00 m) Each Additional Lane. Dead Journey Charges. OVERLAY DESIGN Benkelman Beam Test (Excluding Dead Journey Charges)

NON -DESTRUCTIVE TEST 112 113

Rebound Hammer Test. Ultrasonic Pulse Velocity

Important Note:The above rates are applicable for all Division & Subdivision under P.W.D. & Z.P. in Maharashtra and for other Govertment / Private Organization the rates shall be twice as mentioned in DSR.

Suprintending Engineer Vigilance & Quality Control Circle, Pune

8: FIRE FIGHTING

FIRE FIGHTING WORK SCHEDULE OF RATES SR. NO.

1.1

1.2

1.3

DESCRIPTION OF ITEM

QTY. NOS

ABC POWDER MAP 50, CAPACITY 2 KG Providing 2 kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge Gross Weight 3.6 kg, Empty Weight 1.6 kg, Can Height 341 MM, Diameter 108 MM, Discharge Time less than 8 Secs, Controllable discharge mechanism, Range minimum 4 meters, EACH applicable on Class ABC and electrically started Fire, A Rating 5A, B Rating 21B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years Warranty. ABC POWDER MAP 50, CAPACITY 4 KG Providing 4 kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge Gross Weight 6.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter 140 MM, Discharge Time : less than 9 Secs, Controllable discharge mechanism, Range minimum 4 meters, EACH applicable on Class ABC and electrically started Fire, A Rating 13A, B Rating 55B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, ISI and EN Approved with 5 Years Warranty. ABC POWDER MAP 50, CAPACITY 6 KG Providing 6 kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge Gross Weight 9.5 kg, Empty Weight 3.5 kg, Can Height : 435 MM, Diameter 160 MM, Discharge Time : less than 9 Secs, Controllable discharge mechanism, Range minimum 4 meters, EACH applicable on Class ABC and electrically started Fire, A Rating 21A, B Rating 89B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, ISI and EN Approved with 5 Years Warranty.

Rate

4343.65

6032.25

7331.65

1.4

2.1

2.2

2.3

ABC POWDER MAP 50, CAPACITY 9 KG Providing 9 kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge Gross Weight 13.8 kg, Empty Weight 4.8 kg, Can Height : 611 MM, Diameter 175 MM, Discharge Time : less than 18 Secs, Controllable discharge mechanism, Range minimum 4 meters, EACH applicable on Class ABC and electrically started Fire, A Rating 21A, B Rating 89B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, ISI and EN Approved with 5 Years Warranty. ABC POWDER MAP 90, CAPACITY 25 KG Providing 25 kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type / Cartridge Operated as per IS:10658, Pressure Gauge Gross Weight 71 kg, Empty Weight 46 kg, Can Height : 1190 MM, Diameter 300 MM, Discharge Time : less than 30 Secs, Controllable discharge mechanism, EACH Range minimum 6 meters, applicable on Class ABC and electrically started Fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 4 MM, with one Years Warranty. ABC POWDER MAP 90, CAPACITY 50 KG Providing 50 kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, / Cartridge Operated as per IS:10658 Pressure Gauge Gross Weight 125 kg, Empty Weight 75 kg, Can Height : 1190 MM, Diameter 400 MM, Discharge Time : less than 50 Secs, Controllable discharge EACH mechanism, Range minimum 8 meters, applicable on Class ABC and electrically started Fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 5 MM, with one Years Warranty. ABC POWDER MAP 90, CAPACITY 75 KG Providing 75 kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type / Cartridge Operated as per IS:10658 , Pressure Gauge Gross Weight 161.5 kg, Empty Weight 86.5 kg, Can Height : 1190 MM, Diameter 400 MM, Discharge Time EACH : less than 60 Secs, Controllable discharge mechanism, Range minimum 10 meters, applicable on Class ABC and electrically started Fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating

9652.5

37125

63112.5

81675

of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 5 MM, with one Years Warranty.

3.1

3.2

40.16

CEILING MOUNTED (SP-POWDER MAP 90), CAPACITY 5 KG Providing 5 kg Ceiling Mounted Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge Gross Weight 7.7 kg, Empty Weight 2.7 kg, Can Height : 267 MM, Diameter 230 MM, Discharge Time : less than 8 Secs, , Range EACH minimum 10 meters, applicable on Class ABC and electrically started Fire, A Rating 21A, B Rating 89B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years Warranty. CEILING MOUNTED (SP-POWDER MAP 90), CAPACITY 10 KG Providing 10 kg Ceiling Mounted Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge Gross Weight 14.8 kg, Empty Weight 4.8 kg, Can Height : 316 MM, Diameter 300 MM, Discharge Time : less than 10 Secs EACH , Range minimum 10 meters, applicable on Class ABC and electrically started Fire, A Rating 21A, B Rating 89B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 2.00 MM, with 5 Years Warranty. CEILING MONNEX POWDER, CAPACITY 2 KG Providing 2 kg Ceiling Mountd Fire Extinguisher Monnex Powder, Stored Pressure Type, Pressure Gauge Gross Weight 4.9 kg, Empty Weight 2.9 kg, Can Height : 435 MM, Diameter 140 MM, Discharge Time : less than 9 Secs, Controllable discharge mechanism, Range minimum 4 meters, applicable on EACH Class A,B and electrically started Fire, Very effective on Class B fire,B Rating 144B, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years Warranty.

8538.75

13253.65

10395

40.17

40.17

40.24

40.25

CEILING MONNEX POWDER, CAPACITY 5 KG Providing 5 kg Ceiling Mountd Fire Extinguisher Monnex Powder, Stored Pressure Type, Pressure Gauge Gross Weight 7.7 kg, Empty Weight 2,7 kg, Can Height : 267 MM, Diameter 230 MM, Discharge Time : less than 15 Secs, Controllable discharge mechanism, Range minimum 10 meters, applicable on Class A,B and electrically started Fire, Very effective on Class B fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years Warranty. CEILING MONNEX POWDER, CAPACITY 10 KG Providing 10 kg Ceiling Mountd Fire Extinguisher Monnex Powder, Stored Pressure Type, Pressure Gauge Gross Weight 14.8 kg, Empty Weight 4.8 kg, Can Height : 316 MM, Diameter 300 MM, Discharge Time : less than 15 Secs, Controllable discharge mechanism, Range minimum 10 meters, applicable on Class A,B and electrically started Fire, Very effective on Class B fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, with 5 Years Warranty. PROVIDING CLEAN AGENT HCFC-123/HFC 236fa, CAPACITY 2 KG Providing 2 kg Fire Extinguisher Clean Agent HCFC123/HFC 236fa, Stored Pressure Type, Pressure Gauge Gross Weight 3.6 kg, Empty Weight 1.6 kg, Can Height 341 MM, Diameter 108 MM, Discharge Time less than 6 Secs, Controllable discharge mechanism, Range minimum 2 meters, applicable on Class ABC and electrically started Fire, B Rating 21B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 2.00 MM, , EN Approved with 5 Years Warranty. PROVIDING CLEAN AGENT HCFC-123/HFC 236fa, CAPACITY 4 KG Providing 4 kg Fire Extinguisher Clean Agent HCFC123/HFC 236fa, Stored Pressure Type, Pressure Gauge Gross Weight : 6.9 kg, Empty Weight: 2.9 kg, Can Height 435 MM, Diameter 140 MM, Discharge Time less than 9 Secs, Controllable discharge mechanism, Range minimum 4 meters, applicable on Class ABC and electrically started Fire, A Rating 5A, B Rating 34B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining,

EACH

17448.75

EACH

34582.5

EACH

14850

1

26730

Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, , EN Approved with 5 Years Warranty.

40.26

40.27

40.28

PROVIDING CLEAN AGENT HCFC-123/HFC 236fa, CAPACITY 6 KG Providing 6 kg Fire Extinguisher Clean Agent HCFC123/HFC 236fa, Stored Pressure Type, Pressure Gauge Gross Weight : 9.5 kg, Empty Weight: 3.5 kg, Can Height 486 MM, Diameter 160 MM, Discharge Time less than 9 Secs, Controllable discharge mechanism, Range minimum 4 meters, applicable on EACH Class ABC and electrically started Fire, A Rating 5A, B Rating 34B Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, , EN Approved with 5 Years Warranty. CEILING MOUNTED CLEAN AGENT HCFC-123/HFC 236fa, CAPACITY 5 KG Providing 5 kg Fire Extinguisher Clean Agent HCFC123/HFC 236fa, Stored Pressure Type, Pressure Gauge Gross Weight :7.7 kg, Empty Weight 2.7 kg, Can Height :267 MM, Diameter 230 MM, Discharge Time less than 8 Secs, Auto discharge mechanism, on EACH temperature rise, applicable on Class ABC and electrically started Fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 1.60 MM, , EN Approved with 5 Years Warranty. CEILING MOUNTED CLEAN AGENT HCFC-123/HFC 236fa, CAPACITY 10 KG Providing 10 kg Fire Extinguisher Clean Agent HCFC123/HFC 236fa, Stored Pressure Type, Pressure Gauge Gross Weight :14.8 kg, Empty Weight : 4.8 kg, Can Height :316 MM, Diameter : 300 MM, Discharge Time less than 10 Secs, Auto discharge mechanism, EACH on temperature rise, applicable on Class ABC and electrically started Fire, Can construction: Deep drawn & Co. Mig welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy powder coating, External Coating of Can: Epoxy Polyster powder Coating, Sheet metal Thickness: 2.00 MM, , EN Approved with 5 Years Warranty.

37867.5

34897.5

55687.5

40.4

40.41

40.42

40.43

PROVIDING CO2-ALUMINIUM 2 KG Providing 2 kg CO2 Gas Type Fire Extinguisher, Use Unused Mechanism Squeeze Grip, Gross Weight : 5.16 kg, Empty Weight : 3.16 kg, Can Height : 372 MM, Diameter 232 MM, Discharge Time : less than 8 Secs, Controllable discharge mechanism, , applicable on Class B&C fire, B Rating 13B, Can construction: Cold Impact Extrusion,, Valve construction : Forging and Machining, Internal Coating of Can : Not Applicable, External Coating of Can: Spray Painting,, Aluminium metal ISO & PESO Approved with 1 Year Warranty. PROVIDING CO2-ALUMINIUM 4.5 KG Providing 4.5 kg CO2 Gas Type Fire Extinguisher, Trolley Mounted Easy Weight Management, Use Unused Mechanism Squeeze Grip, Gross Weight : 11.6 kg, Empty Weight : 6.66 kg, Can Height : 651 MM, Diameter 140 MM, Discharge Time : less than 10 Secs, Controllable discharge mechanism, , applicable on Class B&C fire, B Rating 21B, Can construction: Cold Impact Extrusion,, Valve construction : Forging and Machining, Internal Coating of Can : Not Applicable, External Coating of Can: Spray Painting,, Aluminium metal ISO & PESO Approved with 1 Year Warranty. PROVIDING AFFF-FOAM 9 LITERS Providing 9 Liters Fire Extinguisher,AFFF Foam Type, Stored Pressure Type Pressure Gauge,Gross Weight : 14.6 kg, Empty Weight : 5.6 kg, Can Height : 611 MM, Diameter 175 MM, Discharge Time : less than 60 Secs, Controllable discharge mechanism, , Range minimum 6 meters, Applicable on Class A & B fire, A Rating 13A, B Rating 55B, Can construction: Deep drawn & co.,Mig Welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy Powder Coating, External Coating of Can: Epoxy Polyster Powder coating Sheet Metal Thickness: 2.0 MM ISI and EN Approved, with 1 Year Warranty. PROVIDING AFFF-FOAM 50 LITERS Providing 50 Liters Fire Extinguisher,AFFF Foam Type,External Cartridge Type Pressure Gauge,Gross Weight : 102 kg, Empty Weight : 52 kg, Can Height : 1192 MM, Diameter 300 MM, Discharge Time : less than 180 Secs, Controllable discharge mechanism, , Range minimum 10 meters, Applicable on Class A & B fire, Can construction: Deep drawn & Co2.,Mig Welded, Valve construction : Forging and Machining, Internal Coating of Can : Epoxy Powder Coating, External Coating of Can: Epoxy Polyster Powder coating Sheet Metal Thickness: 4.0 MM with 1 Year Warranty.

EACH

12251.25

EACH

17820

EACH

5940

EACH

33412.5

40.46

40.47

PROVIDING WATER MIST BACK PACK FIRE EXTINGUISHER 9 LITERS Providing Water Mist 9 liters Fire Extinguisher Gross Weight:23.9 kg Weight of the Empty fire fighting system without compressed air bottle and bottle value 13.7 kg. Can Hight: 611 MM, Diameter: 175 MM, Weight of the Gun: 1.0 kg, Nominal charg 9 liter recoil-approx. 10 N extinguishing Media Flow-0.23/ sec, Water Discharge Hose-13 MM, Compressed air to Gun-10MM, applicable on Class A,B & electrically started Fire, A Rating 55A, B Rating 233B, Compressed Air Bottle (volume/*pressure)2L/300 bar, Operating Range Approx, 12.0 M Opreation Time approx 40 Sec. Extinguishing ehnancement agent-foam additive, EN and ERDA approved Sheet Metal Thickness ( SS 316 Ti)1.5 MM 1 year Warranty PROVIDING WATER MIST TROLLEY MOUNTED FIRE EXTINGUISHER 50 LITERS Providing Water Mist 50 liters Fire Extinguisher Gross Weight:92 kg Weight of the Empty fire fighting system without compressed air bottle and bottle value 42 kg. Can Hight: 1192 MM, Diameter: 300 MM, Weight of the Gun: 1.0 kg, Nominal charg 50 liter recoil-approx. 10 N extinguishing Media Flow-0.31/ sec, Water Discharge Hose-13 MM, Compressed air to Gun-10MM, applicable on Class A,B & electrically started Fire, A Rating 55A, B Rating 233B, Compressed Air Bottle (volume/*pressure)6L/300 bar, Operating pressure (dynamic)-approx, 5.0 bar Opreation Time approx 160 Sec. Extinguishing ehnancement agentfoam additive, EN and ERDA approved Sheet Metal Thickness ( SS 316 Ti)-2 MM 1 year Warranty

EACH

445500

EACH

705375

40.48

Providing Carbon Composite Cylinder 2 kg (For 9 liters Water Mist Extinguisher) Without EACH Gas Filling

44550

40.58

PROVIDING QUICK RESPONSE SYSTEM-2KG , Using Clean Agent NAF S 125 Providing QRS:2 Kg- Direct Low Pressure System-Gross Weight 3.98 kg Empty Weight :1.98 Can Height : 333 MM, Diameter 108 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent NAF S 125, zero ODP, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy LED Red . Strobe Amber for Fire , OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 4 meter Sensor tube UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachment 6 Pc

122512.5

EACH

40.59

40.6

40.61

PROVIDING QUICK RESPONSE SYSTEM-4KG , Using Clean Agent NAF S 125 Providing QRS:4 Kg- Direct Low Pressure System-Gross Weight 7 kg Empty Weight :3 Kg Can Height : 413 MM, Diameter 140 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent NAF S 125, zero ODP, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 4 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachment 8 Pc PROVIDING QUICK RESPONSE SYSTEM-6KG , Using Clean Agent NAF S 125 Providing QRS:6 Kg- Direct Low Pressure System-Gross Weight 9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, Diameter 160 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent NAF S 125, zero ODP, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 5 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 10 Pc PROVIDING QUICK RESPONSE SYSTEM-9KG , Using Clean Agent NAF S 125 Providing QRS: 9 Kg- Direct Low Pressure System-Gross Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 MM, Diameter 175 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent NAF S 125, zero ODP, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 5 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line

EACH

148500

EACH

170775

EACH

193050

adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 10 Pc

40.62

40.63

PROVIDING QUICK RESPONSE SYSTEM-2KG , Using Clean Agent HCFC 123 Providing QRS:2 Kg- Direct Low Pressure System-Gross Weight 3.98 kg Empty Weight :1.98 Can Height : 333 MM, Diameter 108 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent HCFC-123/HFC 236fa, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 3 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 6 Pc PROVIDING QUICK RESPONSE SYSTEM-4KG , Using Clean Agent HCFC 123 Providing QRS:4 Kg- Direct Low Pressure System-Gross Weight 7 kg Empty Weight :3 Kg Can Height : 413 MM, Diameter 140 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 1.60 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent HCFC-123/HFC 236fa, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 4 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 8 Pc

EACH

111375

EACH

129937.5

40.64

40.65

40.78

40.71

PROVIDING QUICK RESPONSE SYSTEM-6KG , Using Clean Agent HCFC 123 Providing QRS:6 Kg- Direct Low Pressure System-Gross Weight 9.42 kg Empty Weight :3.42 Kg Can Height : 460 MM, Diameter 160 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent HCFC123/HFC 236fa, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 5 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 10 Pc PROVIDING QUICK RESPONSE SYSTEM-9KG , Using Clean Agent HCFC 123 Providing QRS: 9 Kg- Direct Low Pressure System-Gross Weight:14.53 kg Empty Weight :5.53 Kg Can Height : 590 MM, Diameter 175 MM, Can construction: Deep drawn , Valve construction : Forging and Machining,External Construction: Epoxy powder Coating, Sheet Metal Thickness: 2.00 MM 1 year Warranty Valve : Nickel Plated, With Integrated Ball Valve, Integrated Position Control for ball valve open close, Extinguishing Clean Agent HCFC123/HFC 236fa, Stored Pressure Fitted With pressure Gauge, Control Panel having Maintoring LED's for AC Power System On , Discharged, valve Closed, Valve Open, Pressure Healthy Strobe Red Strobe Amber, OLED Graphic Display 95 X 16, Battery Backup, 3 Outpus Using Potential Free Relay ccontact,Audio Output using Piezo buzzer, 5 meter Sensor tue UV Resistance with Pressrization of Tube esing Nitrogen Gas, End of Line Plug 1 Pc, End of Line adapter i Pc, T Connection/Elbow/Straight Connection 1 Pc. Pressure Switch M 10X1, Switchpoint 15 Bar-1Pc Tube Attachemnt 12 Pc ESCAPE SIGNAGES Providing Escape Singage: Photoluminescent rigid plastic, 2 MM thickness, printed on high quality glass paint with UV resistance, 5 years warranty material Used-Non Radiocactive, non-phosphorous, non toxic and lead free available in different types & sizes, time after removing the light source (in minutes): 60 minutes, Luminescent Intensity (Milicandelas*per square meter-mcd/sqm):30 mcd/sqm. luminescent intensity greater than 0.32 mcd/sqm, period of Light Decay*(in Minutes):3100 SIGNAGES FOR WALLS / FLOORS Providing Escape Singage: Photoluminescent rigid plastic, 2 MM thickness, printed on high quality glass paint with UV resistance, 5 years warranty material Used-Non Radiocactive, non-phosphorous, non toxic and lead free available in different types & sizes, time after removing the light source (in minutes): 60 minutes, Luminescent Intensity (Milicandelas*per square meter-mcd/sqm):30 mcd/sqm.

EACH

155925

EACH

178200

SQCM

3.78

SQCM

8.91

luminescent intensity greater than 0.32 mcd/sqm, period of Light Decay*(in Minutes):3100

40.73

40.74

40.84

EVACUTION PLAN(PRICE FOR 10+UNIT) Providing Escape Singage: Photoluminescent rigid plastic, 2 MM thickness, printed on high quality glass paint with UV resistance, 5 years warranty material Used-Non Radiocactive, non-phosphorous, non toxic and lead free available in different types & sizes, time after removing the light source (in minutes): 60 minutes, Luminescent Intensity (Milicandelas*per square meter-mcd/sqm):30 mcd/sqm. luminescent intensity greater than 0.32 mcd/sqm, period of Light Decay*(in Minutes):3100 EVACUTION PLAN(PRICE FOR LESS THAN 10 UNIT) Providing Escape Singage: Photoluminescent rigid plastic, 2 MM thickness, printed on high quality glass paint with UV resistance, 5 years warranty material Used-Non Radiocactive, non-phosphorous, non toxic and lead free available in different types & sizes, time after removing the light source (in minutes): 60 minutes, Luminescent Intensity (Milicandelas*per square meter-mcd/sqm):30 mcd/sqm. luminescent intensity greater than 0.32 mcd/sqm, period of Light Decay*(in Minutes):3100 ESCAPE GEAR Providing Escape Gear, Mild Steel Box size 425MM X 360 MM X 140 MM, Epoxy powder coated to protect it from weathering, smoke hood Tested to European Standard UN 403:1993-S Known to reduce Carbon monoxide, propenal (acrolein) hydrogen choloride, hydrogen cyanide and solid & liquid toxic particles to manageable level for at least 15 minutes, shall withstand temperatures upto 80 Dug, Single use only, Fire Blanket: Size 1.2 M X 1.8 M, used to cover any vessel containing the fire completely, Used to extinuish a clothing fire wrap blanket around victim.

SQCM

14.85

SQCM

16.335

EACH

20047.5

9: MATERIAL MASTER Sr No

DSR Reference

Description Bridge-BR Works

Unit

Rate

: Bridge

1

1 / 270

Bitumen Joint FILLER 18kg Tin Number

930.00

2

2 / 270

Bitumen Pad 25mm thick 1.20 Number x 1.20 Mtr

1388.00

3

3 / 270

Restrained Neoprene Bearing

Cubic Centimeter

1.15

4

4 / 270

Epoxy primer

Kilogram

400.00

5

5 / 270

Gelatin

Kilogram

80.00

6

6 / 270

Steel pipe 25 mm external dia Running as per IS 1239 Meter

126.00

7

7 / 270

Steel pipe 50 mm external dia Running as per IS 1239 Meter

260.00

8

8 / 270

Steel wire rope 20 mm / 40 mm

Kilogram

48.00

9

9 / 270

Welded steel wire fabric

Kilogram

62.00

10

10 / 270

Electric Detonators

Number

11.00

11

11New / 270

Bottle Nut inner dia 25 mm / 32 mm

Kilogram

126.00

12

12New / 270

Copper Plate ( 12 Mtr Long and 250 mm wide and 2 mm thick)

Kilogram

510.00

13

13New / 270

Compressible Fibre Board 20 mm thick

Square Meter

976.00

14

14New / 270

Premoulded Joint FIller

Kilogram

56.00

15

15New / 270

Wooden Bullies 8 inch dia

Number

338.00

16

16New / 270

Wooden Bullies 2 inch dia

Running Meter

14.00

Building-Bd-A : Excavation 1

1 / 240

Blasting Powder

Kilogram

84.00

2

2 / 240

Detonator

Number

12.00

3

3 / 240

Fuse

Number

12.00

4

4 / 240

Nipple For Fastening Detenator

Number

32.00

5

5 / 240

Noble Dynamite

Kilogram

84.00

6

6 / 240

Red Tape Safety Fuse

Running Meter

7.50

Per Box

88.00

Building-Bd-C : Structural Steel Work 1

1 / 240

M.S.screws etc. 35mm dia. and

75mm long (100nos.) 2

2 / 240

Nut Bolts 16mm dia./Nails all size

Kilogram

64.00

3

3 / 241

Nut Bolts washers 12mm dia. 45mm long

Number

10.00

4

4 / 241

Nut Bolts washers 12mm dia. 75mm long

Number

12.00

5

5 / 241

M.S. Locking Arrangement for gate

Number

640.00

Building-Bd-F : Reinforcement Cement concrete 1

1 / 241

Binding Wire

Kilogram

64.00

2

2 / 241

Centering Oil

Litre

8.00

3

3 / 241

Plastic Cover Block

Number

2.00

4

4 / 241

R.C.C.Jali 50mm thick

Square Meter

494.00

5

5 / 241

Plastizer (Rheobuild) 825 RMt.

Litre

110.00

6

6NEW / 242 Concrete Spacer Block 15 mm

Number

1.90

7


Number

2.10

8


Number

2.30

9

9NEW / 242 Concrete Spacer Block 30 / 40 mm

Number

3.65

Building-Bd-G : Brick Work 1

1 / 241

Fire Bricks (Red)

Number

22.00

2

2 / 241

Wire Cut Bricks

Number

0.00

Building-Bd-H : Stone Masonry 1

1 / 241

Corner stone 38*20*30cm

Number

60.00

2

2 / 241

Corner / Quions 30*20*30cm

Number

326.00

3

3 / 241

Face Stone / Trap Rubble

Cubic Meter

102.00

4

4 / 241

Khandakies

Number

44.00

5

5 / 241

Pin Header (Standard Size)

Number

30.00

6

6 / 241

Quarry Spall, laterite upto 5kg (0.3*0.3*0.3)

Number

68.00

7

7 / 241

Quarry Spall (Trap Rubble)

Number

68.00

8

8 / 241

Through Stone Ordinary

Number

28.00

Building-Bd-I : Cement Concrete Stone Masonry 1

1 / 241

Hollow Blocks C.C.0.2*0.2*0.4M

Number

28.00

2

2 / 241

Hollow Blocks C.C.0.1*0.2*0.4M

Number

22.00

3

3 / 241

Hollow Block C C 0.30 x 0.20 x 0.15

Number

30.00

40.00

Building-Bd-J : Water Proofing 1

1 / 241

Bitumen (Compound)

Kilogram

2

2 / 241

Brick bats

Cubic Meter 228.00

3

3 / 241

Bitumen Felt (I.S.1322-1970) 20 Running Mtr. long Meter

958.00

4

4 / 241

Polymerised Water proof Compound

Litre

106.00

5

5 / 242

Tar Paper

Square Meter

44.00

6

6 / 242

Water proof compound I.S

Kilogram

44.00

7

7 / 242

Tar Felt B.H.I.S.I.3mm thick

Square Meter

74.00

8

8 / 242

Acrylic Polymer Modified waterproofing Powder

Kilogram

126.00

9

9 / 242

Acrylic Polymer Modified Liquid

Litre

144.00

10

10 / 242

Fibre Glass Mesh

Square Meter

44.00

Building-Bd-K : Expansion Joint 1

1 / 242

Polydee-TP40 Primer

Kilogram

446.00

2

1 / 242

Polydee-TP40 Primer.

Kilogram

446.00

3

2 / 242

Polydee-TP42 Primer

Litre

160.00

4

3 / 242

Polydee-LM

Kilogram

448.00

5

3 / 242

Polydee-LM.

Kilogram

448.00

6

3 / 242

Polydee-LM 150mm width

Running Meter

482.00

7

4 / 242

Bituflex Cloesdcell foam 30x30 mm

Running Meter

48.00

8

4 / 242

AG 10 Granules

Kilogram

14.00

9

5 / 242

Polydee-41 sealant and polyseal Kilogram

786.00

10

5 / 242

Polydee-MC

Kilogram

306.00

11

6 / 242

Polydee-11

Kilogram

1068.00

Building-Bd-L : Plastering and Pointing 1

1 / 242

Neeru / Sanala

Kilogram

6.00

2

2 / 242

White Putty (Cement)

Kilogram

0.00

3

3 / 242

Texture Material

bags

902.00

Building-Bd-M : Paving,Flooring and Dado 1

1 / 242

Rough Shahabad 25 to 30mm thick

Square Meter

200.00

2

2 / 242

Rough Shahabad 40 to 45 mm thick

Square Meter

232.00

3

3 / 242

Polished Shahabad 25 to 30mm thick

Square Meter

240.00

4

4 / 242

Rough Shahabad 50 to 60mm thick

Square Meter

278.00

5

5 / 242

Polished Shahabad 40 to 50mm thick For step

Square Meter

376.00

6

6 / 242

Polished Shahabad Machine cut 25mm thick

Square Meter

262.00

7

7 / 242

Polished Shahabad for step 25mm thick

Square Meter

270.00

8

8 / 242

Tandoor Polished 25mm thick (Machine cut)

Square Meter

328.00

9

9 / 242

Tandoor Polished 25mm thick (Hand Cut)

Square Meter

278.00

10

10 / 242

Tandoor Polished for steps 25mm thisk

Square Meter

354.00

11

11 / 243

Black Kadappa (one side polish) Square (Machine cut) 25mm thick Meter

374.00

12

12 / 243

Black Kadappa (one side polish) Square (Machine cut) 35mm thick Meter

422.00

13

13 / 243

Both Sides Polished Kadappa stone 25mm thick

Square Meter

468.00

14

14 / 243

Kota stone (Machine cut) upto Square 25-30mm thick one side polished Meter

460.00

15

15 / 243

Kota stone (Hand cut) upto 2530mm thick one side polished

Square Meter

428.00

16

16 / 243

Kota stone for step polished) upto 25mm thick (1.2*0.3M)

Square Meter

584.00

17

18 / 243

White glazed tiles 20*10cm

Square Meter

324.00

18

19 / 243

Colour glazed tiles 20*20cm

Square Meter

324.00

19

20 / 243

Ceramic tiles 20*20cm

Square Meter

296.00

20

21 / 243

Ceramic tiles 30*30cm

Square Meter

328.00

21

22 / 243

Ceramil tiles 395*395*7mm

Square Meter

376.00

22

22a / 243

Ceramic Antiskid Flooring Tiles 30 x 30 cm

Square Meter

336.00

23

22b / 243

Ceramic Tiles for dado 30 x 30 cm

Square Meter

328.00

24

22c / 243


Square Meter

472.00

25

22d / 243


Square Meter

608.00

26

23i / 243

Heavy duty interlocking concrete Square block 60mm thick gray 300 Meter kg/sq.cm.

362.00

27

23ii / 243

Heavy duty interlocking concrete Square block 60mm thick coloured Meter 300kg/sq.cm

408.00

28

23iii / 243

Heavy duty interlocking concrete Square block 80mm thick gray Meter 300kg/sq.cm

462.00

29

23iv / 243

Heavy duty interlocking concrete Square block 80mm thick coloured Meter 300kg/sq.cm

498.00

30

23v / 243

Heavy duty interlocking concrete Square block 80mm thick rubber mould Meter glossy 400kg/sq.cm

666.00

31

23vi / 243

Heavy duty interlocking concrete Square block 40mm thick gray Meter 200kg/sq.cm

276.00

32

23vii / 243

Heavy duty interlocking concrete Square block 40mm thick colour 200 Meter kg/sq.cm

298.00

33

24 / 243

Telephone black granite

Square Meter

2704.00

34

25 / 243

Green marble

Square Meter

832.00

35

26 / 243

Vitrified tiles Glossy Size 590 to 605mm* 590 to 605mm*8 to 10mm

Square Meter

572.00

36

27 / 243

Vitrified matt finish - size 590 to Square 605mm* 590 to 605mm* 8 to Meter 10mm

828.00

37

28 / 243

Vitrified rustic matt stone finish size 590 to 605mm *590 to 605mm*8 to 10mm

Square Meter

1052.00

38

29 / 243

Vertified stone effect finish size Square 590 to 605mm* 590 to 605mm Meter * 8 to 10mm

1330.00

39

30New / 243 Calcet Powder

Kilogram

42.00

40

31New / 243 Black Oxide powder

Kilogram

104.00

41

32New / 243 Fevi Matt Chemical 10 Kg Bag

bags

626.00

42

33New / 243 Marble chips

Kilogram

40.00

43

34New / 243 Heavy duty interlocking concrete Square block 60mm thick rubber mould Meter glossy 400kg/sq.cm

605.00

44

35New / 243 Tremix Treatment 100 mm thick Square Meter

92.00

45

999 / 243

Tandoor Polished 49mm thick

Square Meter

0.00

46

999 / 243

Red Granite

Square Meter

0.00

47

999New / 243

Both side polished kadappa stone 25mm thick (1.5*0.45)

Square Meter

0.00

48

999New / 243

Plain cement tiles (Gray)

Square Meter

0.00

49

999New / 243

Plain cement tiles (coloured)

Square Meter

0.00

50

999New / 243

Marble Mosaic tiles (gray) (0.25*0.25m)

Square Meter

0.00

51

999New / 243

Marble Mosaic tiles (white / coloured)

Square Meter

0.00

52

999New / 243

Marble mosaic chequered tiles (gray)

Square Meter

220.00

53

999New / 243

Marble Powder

Kilogram

0.00

54

999New / 243

Pigments for tiles

Kilogram

0.00

55

999New / 243

White glazed tiles 15*15cm

Dozon

0.00

56

999New / 243

Colour glazed tiles 15*15cm

Dozon

0.00

57

999New / 243

Jointless ceramic tiles 600*600*7mm

Square Meter

0.00

58

999New / 243

Paving block heavy duty Glossy

Square Meter

0.00

59

999New / 243

Paving block 80mm thick

Square Meter

0.00

Building-Bd-N : Wood finish 1

1 / 244

Bees wax

Kilogram

110.00

2

2 / 244

Coal Tar

Kilogram

22.00

3

3 / 244

Common Spirit

Litre

70.00

4

4 / 244

French Polish

Litre

110.00

5

5 / 244

Varnish

Litre

108.00

6

6New / 244

Malemaine Polish

Litre

632.00

Building-Bd-O : Oil Painting 1

1 / 244

Oil enamel paint/flat/glossy paint(ready mix) (with I.S.I. Mark)

Litre

230.00

2

2 / 244

Synthetic paint (ready mix)

Litre

204.00

3

3 / 244

Catonic emulsion paint

Kilogram

278.00

4

4 / 244

White oil paint 100ml pack tin

Number

28.00

5

5 / 244

Red Oxide paint

Kilogram

100.00

6

6 / 244

Cement paint

Kilogram

72.00

7

7 / 244

Steel Primer

Litre

110.00

8

8 / 244

Primer for plaster surface

Litre

104.00

9

9 / 244

Putty

Kilogram

44.00

10

10 / 244

Boiled linseed oil

Litre

70.00

11

11 / 244

Linseed oil double boiled

Litre

78.00

12

12 / 244

Terpentine

Litre

52.00

13

13 / 244

Wood Primer

Litre

100.00

14

14 / 244

Brush for lettring

Number

30.00

15

15 / 244

Brush for road marking 5cm

Number

80.00

16

16 / 244

Brush for marking road 8cm

Number

160.00

17

17 / 244

Brush for road marking 10cm

Number

194.00

18

18 / 244

Lustre paint

Litre

214.00

19

19 / 244

Textured Synthetic paint

Litre

208.00

20

20New / 244 White lead paint

Kilogram

262.00

Building-Bd-P : Colour,white washing,distempering 1

1 / 244

Neel

Kilogram

112.00

2

2 / 245

Oil bound distemper

Kilogram

98.00

3

3 / 245

Red powder / Geru

Kilogram

11.00

4

4 / 245

Saras

Kilogram

52.00

5

5 / 245

Scrapping sand paper size (30 * 20cm)

Number

11.00

6

6 / 245

Dry distemper

Kilogram

68.00

Building-Bd-Q : Wood work 1

1 / 245

Ghana teak wood

Cubic Meter

74526.00

2

2 / 245

Ghana teak wood

Cubic Meter

74526.00

3

3 / 245

Teak wood planks above 2.5m length

Cubic Meter

73640.00

4

4 / 245

Teak wood battens 50*25mm

Running Meter

62.00

5

5 / 245

Teak wood bidding 1/2"*1/2"

Running Meter

32.00

6

6 / 245

Teak wood batten 25 mm * 12 mm

Running Meter

42.00

7

7 / 245

Jungle wood (non teak) normal

Cubic Meter

29874.00

8

8 / 245

Jungle wood (non teak) Hard

Cubic Meter

30272.00

9

9 / 245

Bamboo 25mm dia.(4.5 to 6m)

Running Meter

9.00

10

10 / 245

Bamboo 50mm dia.

Running Meter

12.00

11

11 / 245

Bamboo Matting 1.2*1.8m

Square Meter

46.00

12

12 / 245

Commercial ply - wood 4mm thick

Square Meter

208.00

13

13 / 245

DECORATIVE Ply -veneer (1.20*2.40mm)

Square Meter

344.00

14

14 / 245

Ply wood 12mm thick

Square Meter

464.00

15

15 / 245

Ply wood 9mm thick

Square Meter

370.00

16

16 / 245

Ply wood 6mm thick

Square Meter

330.00

17

17 / 245

Mica Laminate as per I.S.I.0.8MM thick

Square Meter

320.00

18

18 / 245

Mica Laminate as per I.S.I.0.1MM thick

Square Meter

292.00

19

19 / 245

Formica 1.5mm thick

Square Meter

512.00

20

20 / 245

Face Vener Board 4mm thick

Square Meter

704.00

21

21 / 245

Hard Board 6mm thick

Square Meter

202.00

22

22 / 245

Laminated board single 6mm

Square

324.00

thick

Meter

23

23 / 246

Laminated boare single10mm thick

Square Meter

354.00

24

24 / 246

Laminated board single 12mm thick

Square Meter

388.00

25

25 / 246

Laminated board single 20mm thick

Square Meter

436.00

26

26 / 246

Laminated board double 6mm thick

Square Meter

424.00

27

27 / 246


Square Meter

410.00

28

28 / 246


Square Meter

410.00

29

29 / 246


Square Meter

414.00

30

30 / 246

Partical board B.W.P.Phinol bond Square 12mm thick Meter

378.00

31

31 / 246


462.00

32

32 / 246


546.00

33

33 / 246


626.00

34

34 / 246

Fevicol / Vamicol

Kilogram

168.00

35

35 / 246

P.V.C.Hand rail 40mm dia.

Running Meter

92.00

36

36 / 246

P.V.C.Hand rail 40mm dia.

Square Meter

110.00

37

37 / 246

Rawal Plug

Per Box

28.00

38

38 / 246

Solid core shutter 35mm thick with commercial veneer facing and phenol bonded

Square Meter

1022.00

39

39 / 246

Wooden peg

Number

5.00

40

40a / 246

M.D.F.board baggasse based Square interior grade plain ( I.S.12406 Meter - 2000 ) 9mm thick

322.00

41

40b / 246


396.00

42

40c / 246


588.00

43

41a / 246

Bagasse based plain partical board's interior grade ( I.S.

290.00

Square Meter

3087 - 2005 ) 9mm thick 44

41b / 246

Bagasse based plain partical board's interior grade ( I.S. 3087 - 2005 )12mm thick

Square Meter

344.00

45

41c / 246

Bagasse based plain partical board's interior grade ( I.S. 3087 - 2005 )18mm thick

Square Meter

442.00

46

42 / 246

Stainless steel pipe hand rail 40mm dia (A grade pipe no. 304Q)

Running Meter

1256.00

47

43Aa / 246

Exterior Grade Plain Ecoboard 09 mm thick

Square Meter

370.00

48

43Ab / 246


Square Meter

376.00

49

43Ac / 246


Square Meter

418.00

50

43Ad / 246


Square Meter

496.00

51

43Ae / 246


Square Meter

540.00

52

43Af / 246


Square Meter

602.00

53

43Ag / 246


Square Meter

780.00

54

43Ah / 246


Square Meter

874.00

55

44Ba / 246

Exterior Grade One Side Laminated Ecoboard - 09 mm thick

Square Meter

410.00

56

44Bb / 246


Square Meter

440.00

57

44Bc / 246


Square Meter

480.00

58

44Bd / 246


Square Meter

542.00

59

44Be / 246


Square Meter

614.00

60

44Bf / 246


Square Meter

710.00

61

44Bg / 246

Exterior Grade One Side

Square

848.00

Laminated Ecoboard - 30 mm thick

Meter

62

44Bh / 246


Square Meter

946.00

63

45Ca / 246

Exterior Grade Both Side Laminated Ecoboard - 09 mm thick

Square Meter

454.00

64

45Cb / 246


Square Meter

488.00

65

45Cc / 246


Square Meter

532.00

66

45Cd / 246


Square Meter

588.00

67

45Ce / 246


Square Meter

652.00

68

45Cf / 246


Square Meter

726.00

69

45Cg / 246


Square Meter

880.00

70

45Ch / 246


Square Meter

0.00

71

999 / 246

Malasia/Asam Wood

Cubic Meter

0.00

72

999 / 246

Ply Wood 19 mm Thick

Square Meter

0.00

Building-Bd-R : Rofing and ceiling 1

1 / 247

A.C.Corrugated sheet 6mm thick Square Meter

182.00

2

2 / 247

A.C. Trofford sheet 6mm thick

Square Meter

220.00

3

3 / 247

A.C.Plane sheet 6mm thick

Square Meter

154.00

4

4 / 247

A.C.Sheet ridge

Pair

174.00

5

5 / 247

A.C.Gutter sheet ridge

Running Meter

156.00

6

6 / 247

A.C.Sheet plain 4mm thick

Square

130.00

Meter 7

7 / 247

G.C.I. Sheet (Corrugated) 22 BWG

Metric Tonne

66410.00

8

8 / 247

G.C.I. Sheet (Corrugated) 24 BWG

Metric Tonne

66410.00

9

9 / 247

G.I. Sheet (plain) 22 BWG

Square Meter

638.00

10

10 / 247

G.I. Sheet (plain) 24 BWG

Square Meter

604.00

11

11 / 247

G.I.Washers

Kilogram

52.00

12

12 / 247

G.I. J or L hooks 6mm dia.

Number

8.00

13

13 / 247

Nails iron all size

Kilogram

60.00

14

14 / 247

Mangalore tiles class AA

Number

14.00

15

15 / 247

Mangalore Ridge / Hip tiles

Number

24.00

16

16 / 247

Mangalore Glass tiles

Number

334.00

17

17 / 247

Mangalore Pattern cowl Ventilator

Number

66.00

18

18 / 247

Karva (for roof and sides 10kg bundle)

Bundle

20.00

19

19 / 247

G.I. Pre coated trapezoidal 0.50 Square mm thick roof Metalic Coloured Meter Sheet

548.00

20

20 / 247

G.I. Pre coated Ridge Sheet

Running Meter

570.00

21

21 / 247

Gypsum powder

Kilogram

11.00

22

22 / 247

Aluminium Alloy plate 2mm thick Square Meter

372.00

23

23 / 247

Aluminium Alloy/galvanised steel Metric Tonne

0.00

24

24 / 247

Aluminium sheeting fixed with Square encapsuled lens type reflective Meter sheeting including 2% towards lettering , cost of angle iron, cost of drilling holes , nuts, bolts etc. and signs as applicable.

16392.00

25

25 / 247

Corrugated sheet , 3mm thick , "Thrie" beam section railing

Kilogram

70.00

26

26New / 247 Plaster Of Paris

bags

100.00

27

27New / 247 Decorative Board of Fibrous Plaster of Paris 12 to 15 mm

Square Meter

308.00

28

28New / 247 Accostic Board 12 mm thick

Square Meter

498.00

29

29New / 247 Gypsum Board 12.5 mm thick

Square

212.00

Meter 30

30New / 247 G.I. Sections

Kilogram

182.00

31

31 / 247

Square Meter

702.00

UPVC 3 layer trapezoidal 2.00 mm sheet

Building-Bd-T : Doors and windows 1

1 / 248

Aldrop 300*16mm Chromium Plated

Number

460.00

2

2 / 248

Aldrop 250*16 mm Brass Chromium plated

Number

422.00

3

3 / 248

Brass Chromium plated box Aldrop 12 mm dia., 150 mm length

Number

452.00

4

4 / 248

Aldrop Aiuminium 300*16mm

Number

208.00

5

5 / 248

Aldrop Iron Oxidise 300*16mm Number

196.00

6

6 / 248

Aldrop Brass Oxidise 300*16mm

Number

1154.00

7

7 / 248

Aldrop Stainless steel 300*16mm

Number

350.00

8

8 / 248

Aldrop Stainless steel 250*16 mm

Number

332.00

9

9 / 248

Brass Oxidissed handle 125mm Number

128.00

10

10 / 248

Handle 125mm M.S. Chromium Number Plated

54.00

11

11 / 248

Handle 150mm Brass Chromium Number plated (Rounded Shape)

232.00

12

12 / 248

Handle 200mm Brass Chromium Number plated (Rounded Shape)

298.00

13

13 / 248

Handle 150mm Stainless Steel (Rounded Shape)

Number

54.00

14

14 / 248

Handle 200mm Stainless Steel (Rounded Shape)

Number

84.00

15

15 / 248

Handle Alluminium 125 mm

Number

46.00

16

16 / 248

Handle for steel window

Number

48.00

17

17 / 248

Handle Iron oxidised 100mm

Number

36.00

18

18a / 248

Brass Oxidised Butt hinges 125mm 14 gauge

Number

232.00

19

18b / 248


Number

212.00

20

18c / 248


Number

188.00

21

19a / 248

Brass Chromium Plated hinges 100mm length , 12 gauge

Number

162.00

22

19b / 248

Brass Chromium Plated hinges 125mm length , 12 gauge

Number

212.00

23

20a / 248

Iron hinges chromium plated 125mm

Number

34.00

24

20b / 248


Number

20.00

25

20c / 248


Number

18.00

26

999 / 248

Handle Aluminium 125mm

Number

58.00

27

21a / 249

Hinges Iron Oxidised 125mm

Number

56.00

28

21b / 249


Number

48.00

29

21c / 249


Number

34.00

30

22a / 249

But Hinges Alluminium 125mm

Number

96.00

31

22b / 249


Number

82.00

32

22c / 249


Number

70.00

33

22d / 249


Number

36.00

34

23i / 249

Brass Double Acting Spring Hinges 100 mm 14 guage

Number

716.00

35

23ii / 249

Brass Double Acting spring Hinges - 125mm 14 gauge

Number

954.00

36

24a / 249

G.I.Screw 125mm

Dozon

72.00

37

24b / 249

G.I.Screw 100mm

Dozon

42.00

38

24c / 249

G.I.Screw 75mm

Dozon

22.00

39

24d / 249

G.I.Screw 50mm

Dozon

20.00

40

24e / 249

G.I.Screw 25mm

Dozon

10.00

41

24i / 249

Stainless Steel Hinges - 100mm Number 14 gauge

54.00

42

24ii / 249

Stainless Steel Hinges - 125mm Number 14 gauge

72.00

43

25a / 249

Brass Screws 100mm

Dozon

106.00

44

25b / 249

Brass Screws 75mm

Dozon

70.00

45

25c / 249

Brass Screws 50mm

Dozon

54.00

46

25d / 249

Brass Screws 25mm

Dozon

24.00

47

26a / 249

Tower bolt brass oxidised 10mm dia.length 300mm

Number

356.00

48

26b / 249


Number

328.00

49

26c / 249


Number

286.00

50

26d / 249


Number

248.00

51

27a / 250

Tower bolt Aluminium 10mm dia.length 300mm

Number

148.00

52

27b / 250


Number

122.00

53

27c / 250


Number

110.00

54

27d / 250


Number

98.00

55

27e / 250


Number

0.00

56

28a / 250

Tower bolt M.S. Chromium Number plated 10mm dia,length 300mm

62.00

57

28b / 250


54.00

58

28c / 250


52.00

59

28d / 250


52.00

60

29a / 250

Tower bolt Brass Chromium plated 150mm dia. 10mm

Number

126.00

61

29b / 250


Number

192.00

62

29c / 250


Number

276.00

63

29d / 250


Number

330.00

64

30a / 250

Tower bolt Iron oxidised 10mm Number dia.length 300mm

365.00

65

30b / 250


320.00

66

30c / 250


245.00

67

31a / 250

Cold Rolled Steel Hollow Section Number Door frame 1829*762mm

1088.00

68

31b / 250


1262.00

69

31c / 250


1324.00

70

31d / 250


1380.00

71

31e / 250


1426.00

72

31f / 250


1352.00

73

31g / 250


1020.00

74

32 / 250

Aluminium stay 20cm

Number

58.00

75

33 / 250

Aluminium stay 25cm

Number

70.00

76

34 / 250

Aluminium stay 30cm

Number

76.00

77

35 / 250

Jali fly proof

Square Meter

428.00

78

36 / 251

Jali chicken mesh

Square Meter

44.00

79

36a / 251

Jali welded mesh 25*25* 13 Guage

Square Meter

162.00

80

36b / 251

Jali welded mesh 25*25* 11 Guage

Square Meter

236.00

81

36c / 251

Jali welded mesh 50*25 13 Guage

Square Meter

200.00

82

36d / 251


Square Meter

212.00

83

36e / 251


Square Meter

174.00

84

36f / 251


Square Meter

188.00

85

37 / 251

Wire glass 6 mm thick

Square Meter

568.00

86

38 / 251

X.P.M. 12mm * 18 gauge

Square Meter

120.00

87

39a / 251

Hold fast Iron 300*40*5mm

Number

26.00

88

39b / 251

Hold fast for Steel gate

Number

50.00

89

40a / 251

Sliding Door Bolt Brass Chromium plated 12mm dia. 200mm length

Number

150.00

90

40b / 251

Sliding Door Bolt Brass Chromium plated 12mm dia. 250mm length

Number

184.00

91

40c / 251

Sliding Door Bolt Stainless Steel Number 12mm dia. 200mm length

78.00

92

40d / 251

Sliding Door Bolt Stainless Steel Number 12mm dia. 250mm length

94.00

93

40e / 251

Sliding door bolt Chromium plated 250mm

Number

184.00

94

40f / 251

Sliding door bolt Aluminium plated 250mm

Number

166.00

95

40g / 251

Sliding door bolt Brass plated 250mm

Number

410.00

96

40h / 251

Sliding door bolt ron plated 250mm

Number

142.00

97

40i / 251

Sliding door bolt Brass oxidised Number 300mm

543.00

98

41a / 251

Glass plain 3mm

316.00

Square

Meter 99

41b / 251

Glass plain 5mm

Square Meter

336.00

100

42a / 251

Glass obscured (bajara) 3mm

Square Meter

256.00

101

42b / 251

Glass obscured (bajara) 5mm

Square Meter

422.00

102

43 / 251

Brass oxidised hooks and eyes 200mm

Number

60.00

103

44 / 251

Brass oxidised hooks and eyes 225mm

Number

70.00

104

45 / 251

Iron oxidised hooks and eyes 100 mm

Number

68.00

105

46 / 252

Iron oxidised hooks and eyes 200 mm

Number

78.00

106

47 / 252

Aluminium hooks and eyes 200 Number mm

244.00

107

48 / 252

Chromium plated hooks and eyes 200 mm

80.00

108

49 / 252

Commercial Core Flush Door 35 Square mm Meter

860.00

109

50 / 252

Bearing roller glazed window shutter

Number

92.00

110

51 / 252

Chain and Stopper Iron

Number

60.00

111

52 / 252

Stopper for steel window

Number

34.00

112

53 / 252

Chain and stopper Brass Chromium plated

Number

116.00

113

54 / 252

Chapras 100mm iron oxidised

Number

40.00

114

55 / 252

G.I. Nut Bolt

Number

2.65

115

56 / 252

G.I.Shoe 75mm to 100mm (18gauge)

Number

30.00

116

57 / 252

Iron oxidised latch 250mm long Number

92.00

117

58 / 252

Housing box to rolling shutter

Square Meter

1244.00

118

58a / 252

Mechanical Gear For Rolling Shutter

Number

1978.00

119

59 / 252

Mortice lock superior

Number

1054.00

120

60 / 252

Solid Core commercial shutter 30mm thick phenol bonded

Square Meter

812.00

121

61 / 252

Iron washer 12mm to 16mm

Number

6.00

122

62 / 252

Plain aluminium sheet 24gauge Square (10'*4' of size) Meter

322.00

123

63a / 252

Door Stopper Brass Oxidised

162.00

Number

Number

124

63b / 252

Door Stopper Stainless Steel

Number

94.00

125

63c / 252

Door Stopper M.S. Chromium plated

Number

74.00

126

63d / 252

Door Stopper Iron Oxidised

Number

66.00

127

64 / 252

Hydraulic door closer.

Number

1068.00

128

65 / 252

Concealed Hydraulic door closer Number

3248.00

129

66 / 252

Brass Chromium plated door eyes 180 degrees

Number

40.00

130

67 / 252

Brass Chromium plated door chain

Number

120.00

131

68a / 253

Parliamentary Hinges Brass 125 Number mm

450.00

132

68b / 253

Parliamentary Hinges Brass 100 Number mm

382.00

133

68c / 253

Parliamentary Hinges Mild Steel Number 125 mm

72.00

134

68d / 253

Parliamentary Hinges Mild Steel Number 100 mm

54.00

135

69 / 253

Alluminium Section

Kilogram

268.00

136

70 / 253

Nylon / PVC Gasket

Running Meter

36.00

137

71 / 253

Rubber Lining

Running Meter

14.00

138

72 / 253

Ball bearing 18 mm diameter

Number

88.00

139

73 / 253

Alluminium Screw 32 x 6 mm, 25 x 6 mm

Dozon

12.00

140

74 / 253

Concealed locking arrangement Number of 100 mm length for sliding window

88.00

141

75 / 253

Alluminium Grill 7.50 mm thick

18.26

142

76 / 253

Alluminium pad handle 150 mm Number dia

204.00

143

77 / 253

Hydraulic floor spring heavy duty ( 150 Kg capacity) ISI mark

Number

3126.00

144

78 / 253

Hydraulic floor spring heavy Number duty ( 90 Kg capacity) ISI mark

2936.00

145

79 / 253

Locking arrangement for alluminium openable door

Number

518.00

146

80 / 253

Mild Steel C.P. Aldrop 300 x 16 Number mm dia

206.00

147

81 / 253

Iron Oxidized Handle 125 mm

56.00

Square Meter

Number

length 148

82 / 253

Iron Oxidized sliding door bolt 200 mm length, 12 mm dia

Number

60.00

149

83 / 253

Powder Coating

Square Meter

544.00

150

84 / 253

Powder and Chemicals for colour anodizing process of alluminium sections

Kilogram

108.00

151

85New / 253 Aluminium Sheet 24 B.W.G

Square Meter

342.00

152

86New / 253 Lock for Sliding Shutter

Number

112.00

153

87New / 253 All Bearing Roller

Number

84.00

154

88New / 253 All Frame Rail Angle

Kilogram

287.00

155

89New / 253 Welding Electrodes

Number

8.00

156

90New / 253 M.S. Angle / Flat

Kilogram

74.00

157

91New / 253 C.R.C. Sheet

Square Meter

528.00

158

92New / 253 Abstrone Butadyne Styrine (ABS) Door Shutter including Transportation

Number

598.00

159

93New / 253 Puff Insulation 35-40 Kg/Cumt. Kilogram Density

254.00

160

94New / 253 Hinges Steel 125mm

Number

32.00

161

95New / 253 Hinges powder coated 125mm

Number

78.00

162


Number

24.00

163


Number

68.00

164


Number

16.00

165


Number

58.00

166

100New / 253

G.I.Precoated trapezoidal zinc coated sheets 0.50mm thick

Square Meter

282.00

167

101New / 253

M.S. Tube 19 x 19 mm x 19 gauge

Running Meter

244.00

168

102New / 253

M.S. Tube 15 x 15 mm x 19 gauge

Running Meter

200.00

169

103New / 253

M.S.C.P. Tower Bolt 200mm

Number

50.00

170

104New / 253

PVC Door Shutter 29 mm thick Factory Made Shutter

Square Meter

3084.00

171

105New / 253

PVC Door Shutter 34 mm thick Factory Made Shutter

Square Meter

3708.00

172

106New / 253

FRP Door Shutter 30 mm thick Factory Made Shutter

Square Meter

2378.00

173

107New / 253

FRP Door Shutter 35 mm thick Factory Made Shutter

Square Meter

3286.00

174

108New / 253

P.V.C. Gasket for Glass

Running Meter

42.00

175

109New / 253

Bison Pannel

Square Meter

438.00

176

115New / 253

G.I.Hook 25mm

Number

12.00

177

116New / 253

P.V.C. Sheet 5 mm

Running Meter

116.00

178

117New / 253

Flush Door 30 mm

Square Meter

1016.00

179

118New / 253

P.V.C. Sheet Moulded 2mm

Square Meter

74.00

180

119New / 253

P.V.C. Sheet Predominated 2mm

Square Meter

166.00

181

120New / 253

Modiband

Kilogram

84.00

182

121New / 253

Feviquick

Litre

348.00

183

122NEW / 254

Flambloc GS10 Rretardant

Kilogram

1350.00

184

123NEW / 254

Flambloc 200 Rretardant

Kilogram

1550.00

185

124NEW / 254

Flambloc 500 Rretardan

Kilogram

1900.00

186

125NEW / 254

Flambloc 700 Rretardant

Kilogram

1200.00

187

126NEW / 254

PVC factory made solid panel Square door shutter with stainless steel Meter fixutres & fastening

3789.00

188

127NEW / 254

PVC facory made flush door 30 Square mm with stainless steel fixtures Meter & fastening

3612.00

Building-Bd-V : Water supply and sanitory fittings 1

1 / 253

G.I. Pipe 100mm dia. Medium type Running Meter

768.00

2

2 / 253

G.I. Pipe 100mm dia. Heavy type

Running Meter

886.00

3

3 / 253

G.I. Pipe 15mm dia. Medium type

Running Meter

90.00

4

4 / 254


Running Meter

100.00

5

5 / 254


Running Meter

116.00

6

6 / 254

G.I. Pipe 20mm dia.Heavy type

Running Meter

134.00

7

7 / 254


Running Meter

164.00

8

8 / 254


Running Meter

186.00

9

9 / 254


Running Meter

202.00

10

10 / 254

G.I. Pipe 32mm dia.Heavy type

Running Meter

240.00

11

11 / 254


Running Meter

242.00

12

12 / 254


Running Meter

278.00

13

13 / 254


Running Meter

320.00

14

14 / 254


Running Meter

364.00

15

15 / 254


Running Meter

406.00

16

16 / 254


Running Meter

466.00

17

17 / 254


Running Meter

506.00

18

18 / 254


Running Meter

544.00

19

19 / 254

G.I.Clamps 100mm to 150mm

Number

22.00

20

20 / 254


Number

13.00

21

21 / 254


Number

14.00

22

22 / 254

G.I.Fixtures

Kilogram

50.00

23

23 / 254

G.I.Screws 30mm

Number

3.35

24

24 / 254

G.I.Screws 40mm

Number

4.00

25

25 / 254

G.I.Union 25mm dia.

Number

20.00

26

26 / 254

Gully trap cover with frame

Number

178.00

27

27 / 254

Gun Metal stop tap with crutch wheel 20mm

Number

180.00

28

28 / 254

Gun metal stop tap with crutch wheel 25mm

Number

224.00

29

29 / 254

GI.Wire bolt 30 x1.6cm

Number

26.00

30

30 / 254


Number

154.00

31

31 / 255


Number

184.00

32

32 / 255


Number

212.00

33

33 / 255


Number

202.00

34

34 / 255

R.C.water tank 1.2mtr.dia. (2.5m length)

Number

8542.00

35

35 / 255

One piece molded water tank H.D.P. Container Syntex or alike (above 1000 ltr.)

Litre

7.30

36

36 / 255

One piece molded water tank H.D.PContainer Syntex or alike (upto 1000 ltr.)

Litre

7.00

37

37 / 255

C.I.Bend 75mm dia.

Number

232.00

38

38 / 255

C.I.Bend 100mm dia.

Number

268.00

39

39 / 255

C.I.Bip tap 12mm

Number

42.00

40

40 / 255

C.I.Grating 150mm dia.

Number

62.00

41

41 / 255


Number

30.00

42

42 / 255


Number

24.00

43

43 / 255

C.I.Brackets

Pair

124.00

44

44 / 255

C.I.Collers 100mm dia.

Number

214.00

45

45 / 255

C.I.Copllers 75mm dia.

Number

180.00

46

46 / 255

C.I.Cover 45*30 cm with frame

Number

766.00

47

47 / 255

C.I.Cowl / Vent 100mm dia.

Number

310.00

48

48 / 255


Number

370.00

49

49 / 255


Number

238.00

50

50 / 255

C.I.Hinged Cover with frame

Number

542.00

51

51a / 255

C.I.Man hole cover 50 kg.

Number

2496.00

52

51b / 255


Number

2546.00

53

51c / 255


Number

2846.00

54

51d / 255

C.I.Man hole cover 175 kg.Heavy (0.9*0.45m)

Number

5932.00

55

52 / 255

C.I.Nahani trap 100mm dia.(375mm long)

Number

460.00

56

53 / 255

C.I.Nahani trap 75 to 80mm dia.(375mm long)

Number

364.00

57

54 / 255

C.I.100*75*300 long arm (wt. 6kg)nahani trap

Number

544.00

58

55 / 255

C.I.Soil pipe 100mm dia.

Running Meter

786.00

59

56 / 256

C.I.Soil pipe 150mm dia.

Running

1300.00

Meter 60

57 / 256

C.I,Soil pipe 75 to 80mm dia.

Running Meter

648.00

61

57a / 256

C.I.Rain water pipe 75mm dia.

Running Meter

660.00

62

57b / 256


Running Meter

800.00

63

57c / 256


Running Meter

1380.00

64

58 / 256

C.I.Shoe 75 mm dia.

Number

216.00

65

59 / 256

C.I. Shoe 100 mm dia.

Number

276.00

66

60 / 256

C.I.Shoe 150mm

Number

640.00

67

61 / 256

Ball cock 15mm dia.P.V.C.FLOT

Number

154.00

68

62 / 256


Number

264.00

69

63 / 256


Number

498.00

70

64 / 256


Number

552.00

71

65 / 256

Bid cock cock stop tap brass heavy Number 15mm

162.00

72

66 / 256


198.00

73

67 / 256


262.00

74

68 / 256

Bid tap 12mm brass medium

Number

144.00

75

68a / 256

Colour wash hand basin 55*40cm

Number

1084.00

76

68b / 256

Colour wash hand basin 63*45cm

Number

1542.00

77

68c / 256

White glazed wash basin 45*30cm Number

418.00

78

68d / 256

White glazed wash hand basin 55*50cm

Number

846.00

79

68e / 256

P.V.C. flexible Waste Pipe 32 mm dia

Number

54.00

80

68F / 256

White Glazed Wash Hand Basin 63 Number x 45 cm

714.00

81

69 / 256

Sink white glazed 45*20*30cm

Number

920.00

82

70 / 256

Pedestal for wash basin (standard Number size)

910.00

83

71 / 256

C.C.Septic tank 0.9m dia.(2.5m long)

Number

6464.00

84

72 / 256

C.C.Septic tank 1.20m dia.(2.5m long)

Number

8574.00

85

73 / 256

C.I.Steps for manhole

Number

66.00

86

74 / 256

C.I.Cover with frame (Gully trap)

Number

266.00

87

75 / 256

C.I.Plug Bend 150MM dia.

Number

532.00

88

76 / 256

Clamp for G.I.pipe 25mm

Number

10.00

89

77 / 257

Colour European type W.C.Pan

Number

1502.00

90

78 / 257

Earopean type glazed W.C.pan

Number

1330.00

91

79 / 257

W.C.PAN 64 CM.1st class with tap Number

1176.00

92

80 / 257

W.C.PAN 68 CM.1st class with tap Number (Orissa)

1274.00

93

81 / 257

W.C.PAN Coloured glazed 64CM.(Orissa)

Number

1266.00

94

82 / 257

W.C.PAN White glazed 58 CM.Indian.

Number

554.00

95

83 / 257

W.C.PAN White glazed 64 CM (Orissa)

Number

1100.00

96

84 / 257

W.C.PAN White glazed 57.50 CM (Orissa)

Number

1122.00

97

85 / 257

W.C.PAN with P trap 685mm

Number

662.00

98

86 / 257

Fibre flushing tank for W.C.

Number

1120.00

99

87 / 257

Flushing tank automatic Urinal 10ltr. C.I.

Number

1256.00

100

88 / 257

Flushing tank automatic Urinal 5ltr. Number (P.V.C.)

808.00

101

89 / 257

Low level flush pr. St. 10ltr.

Number

976.00

102

90 / 257

Flat back Urinal

Number

792.00

103

91 / 257

Stall type Urinal

Number

1014.00

104

92 / 257

Lipped type Urinal

Number

642.00

105

92a / 257

Coloured glazed full stall Urinal

Number

3662.00

106

93 / 257

Wheel stop tap brass 15mm

Number

164.00

107

94 / 257


Number

212.00

108

95 / 257


Number

276.00

109

96 / 257

Socket brass for 32mm tap

Number

56.00

110

97 / 257


Number

68.00

111

98 / 257


Number

82.00

112

99 / 257


Number

100.00

113

100 / 257

Socket for 100mm tap

Number

104.00

114

101 / 257

Socket for 15mm tap

Number

26.00

115

102 / 257

Socket for 20mm tap

Number

36.00

116

103 / 257

Socket for 25mm tap

Number

42.00

117

104 / 258

Socket for 32mm tap

Number

50.00

118

105 / 258

Socket for 40mm tap

Number

62.00

119

106 / 258

Socket for 50mm tap

Number

76.00

120

107 / 258

Socket for 65mm tap

Number

86.00

121

108 / 258

Socket for 80mm tap

Number

100.00

122

109 / 258

Socket for G.I.PIPE 150mm tap

Number

112.00

123

110 / 258

Span Yarn

Number

76.00

124

111 / 258

Strainer for 100mm

Number

544.00

125

112 / 258

Strainer for 40mm

Number

188.00

126

113 / 258

Strainer for 50mm

Number

214.00

127

114 / 258

Strainer for 80mm

Number

350.00

128

115 / 258

Strainer for 15mm

Number

62.00

129

116 / 258

Strainer for 20mm

Number

68.00

130

117 / 258

Strainer for 25mm

Number

82.00

131

118 / 258

Stone ware pipe 100mm dia.

Running Meter

76.00

132

119 / 258


Running Meter

146.00

133

120 / 258


Running Meter

240.00

134

121 / 258

Stone ware glazed pipe half round Running 100mm dia. Meter

64.00

135

122 / 258

Stop tap brass with crunch wheel 15mm dia.

Number

124.00

136

123 / 258

Towel rod with clamps 16mm dia.

Number

130.00

137

124 / 258

Mirror 40*50cm. With plastic frame Number

376.00

138

125 / 258

Brass T Thimble Socket 32mm dia. Pair

114.00

139

126 / 258

Brass wheel stop tap 32mm dia.

Number

460.00

140

127 / 258


Number

516.00

141

128 / 258


Number

548.00

142

129 / 258


Number

610.00

143

130 / 258


Number

652.00

144

131 / 259

Half turn flush cock 25mm dia.

Number

328.00

145

132 / 259

8 CM dia.M.S.TUBE 40 to 65 cm long

Number

92.00

146

133 / 259

10 CM dia.M.S.TUBE 40 to 65 cm long

Number

108.00

147

134 / 259

12mm flexble inlet pipe connection Number

50.00

148

135 / 259

Alkathene pipe 40mm dia.Heavy type black pipe for Drainage

Running Meter

46.00

149

136 / 259

A.C.Air extractor 45cm dia.

Number

2474.00

150

137 / 259

Bell mouth cover 100mm dia.

Number

62.00

151

138 / 259

Box chamber with lock 0.6*0.45m Number

114.00

152

139 / 259

Brass nozzle pillar tap 12mm

168.00

Number

153

140 / 259

Black bakelite seat to european closer

Number

228.00

154

141 / 259

Concussion push button type gun metal tap 15 to 25mm dia.

Number

92.00

155

142 / 259

Coupling cast Iron 100mm dia.

Number

160.00

156

143 / 259

Coupling cast Iron 80mm dia.

Number

108.00

157

144 / 259

Chromium plated 12mm dia.bib cock

Number

82.00

158

145 / 259

Chromium plated brass fountain jet Number

130.00

159

146 / 259

Chromium plated brass No.plate(60*60*1.5mm)

Number

58.00

160

147 / 259

Chromium plated brass No.plate(95*40*1.05mm)

Number

66.00

161

148 / 259

C.I.Tee

Number

236.00

162

149 / 259

C.I.Trap grating 15*10 cm

Number

128.00

163

150 / 259

C.I.Y junction 100mm dia.

Number

466.00

164

151 / 259


Number

800.00

165

152 / 259


Number

354.00

166

153 / 259

Enameled bend 40mm dia.

Number

28.00

167

154 / 259

Ferrul for C.I.pipr 100mm

Number

246.00

168

155 / 259

White glazed foot rest chequred 25*10 cm

Pair

132.00

169

156 / 259

Half round earthware pipe 100mm(60cm long)

Number

44.00

170

157 / 259

Half round earthware pipe 150mm(60cm long)

Number

40.00

171

339New / 259

Bath stone trap 0.6*0.6*0.45m

Number

60.00

172

158 / 260

Hum Prope

Kilogram

66.00

173

159 / 260

Half round chaina ware pipe 100mm(60cm long)

Number

38.00

174

160 / 260

Half round chaina ware pipe 75mm(60cm long)

Number

52.00

175

161 / 260

B.R.C.Fabric 5mm thick

Square Meter

180.00

176

162 / 260

Lead pipe 12mm dia.

Running Meter

182.00

177

163 / 260

Lead pipe 25mm dia.

Running Meter

240.00

178

164 / 260

Lead pipe 32mm dia.

Running Meter

266.00

179

165 / 260

Lead pipe 40mm dia.

Running

298.00

Meter 180

166 / 260

Lead plate

Kilogram

86.00

181

167 / 260

Mohagani seat with lid

Number

342.00

182

168 / 260

Mosquito proof coupling

Number

44.00

183

169 / 260

Non-return valve 15mm for water meter

Number

204.00

184

170 / 260


Number

276.00

185

171 / 260


Number

260.00

186

172 / 260

Piller tap 12mm dia.chromium plated heavy

Number

186.00

187

173 / 260

P.Trap and lead pipe upto 40mm dia.

Number

182.00

188

174 / 260

Rubber gasket (25, 28 and 20 cm) Running Meter

36.00

189

175 / 260

Rubber Incertion

Kilogram

68.00

190

176 / 260

Rubberised adhesive

Litre

222.00

191

177 / 260

Salt glazed stone ware gully trap (150*150mm)

Number

104.00

192

178 / 260

Self project tap brass chromium plated 15mm

Number

90.00

193

179 / 260

Sewer trap

Number

318.00

194

180 / 260

Shower rose chromium plated brass 10cm

Number

114.00

195

181 / 260

P.V.C. pipe 15mm dia.10kg pressure(class IV)

Running Meter

20.00

196

182 / 260


Running Meter

26.00

197

183 / 260


Running Meter

38.00

198

184 / 260


Running Meter

46.00

199

185 / 260


Running Meter

66.00

200

999 / 260

Piller tap 12mm dia.chromium plated light

Number

180.00

201

92a / 261

Bleaching Powder

Kilogram

68.00

202

92b / 261

Potassium Permanganate

Kilogram

414.00

203

92c / 261

Nylon Brush

Number

58.00

204

92d / 261

Duster

Number

48.00

205

92e / 261

Plastic Bucket

Number

126.00

206

92f / 261

Coir

Kilogram

58.00

207

92g / 261

Gunny Cloth

Running Meter

34.00

208

92h / 261

Kharata

Number

32.00

209

186 / 261


Running Meter

96.00

210

187 / 261


Running Meter

100.00

211

188 / 261

P.V.C. pipe 75mm dia.4 kg pressure(class II)

Running Meter

124.00

212

188a / 261

P.V.C. 75 mm Soil Pipe 6 Kg Pressure

Running Meter

212.00

213

189 / 261

P.V.C. pipe 90mm dia.4 kg pressure(class II)

Running Meter

148.00

214

190 / 261

P.V.C.pipe 110mm dia.4kg.pressure (class II)

Running Meter

180.00

215

190a / 261

P.V.C. 110 mm Rain Water Pipe 6Kg Pressure

Running Meter

218.00

216

190b / 261

P.V.C. 110 mm Soil Pipe 6 Kg Pressure

Running Meter

332.00

217

191 / 261


Running Meter

238.00

218

192 / 261


Number

264.00

219

192a / 261

P.V.C.pipe 160mm dia.Soil Pipe

Running Meter

550.00

220

192b / 261

P.V.C.pipe 160mm dia. Rain Water Running Pipe Meter

452.00

221

193 / 261

P.V.C.Socket 15mm dia.

Number

14.00

222

194 / 261


Number

18.00

223

195 / 261


Number

24.00

224

196 / 261


Number

34.00

225

197 / 261


Number

48.00

226

198 / 261


Number

68.00

227

199 / 261


Number

80.00

228

200 / 261

P.V.C.Flushing tank (12 ltr. Capacity)

Number

1182.00

229

201 / 261

Flush valve 32mm dia.

Number

1284.00

230

202 / 261

Bottle track chromium plated 32mm dia.

Number

472.00

231

203 / 261

Ferocret tank

Litre

6.00

232

204 / 261

Stainless Steel sink of size

Number

5484.00

600*510*200mm of nirali or equivalent make 233

205 / 261

C.P.pillar cock jaquar make continental (Cat.No. CON-011)

Number

680.00

234

206 / 261

C.P.pillar cock (ISI) jaquar make continental

Number

0.00

235

207 / 261

C.P.pillar cock long neck with aerator jaquar make continental (Cat.No. CON-021)

Number

892.00

236

208 / 261

C.P.Bib cock (ISI) jaquar make continental (Cat.No. CON-037)

Number

668.00

237

209 / 261

C.P.Bib Cock long thread jaquar make continental (Cat.No. CON039)

Number

650.00

238

210 / 261

C.P.2-way bib cock jaquar make continental (Cat.No. CON-041)

Number

694.00

239

211 / 262

C.P.bib cock with wall flange long thread jaquar make continental (Cat.No. CON-047)

Number

700.00

240

212 / 262

C.P.Bib cock with nozzle jaquar make continental (Cat.No. CON049)

Number

746.00

241

213 / 262

C.P.Angular stop cock jaquar make continental (Cat.No. CON053)

Number

652.00

242

214 / 262

C.P.Angular stop cock long thread Number jaquar make continental (Cat.No. CON-055)

668.00

243

215 / 262

C.P.angular stop cock with wall flange jaquar make continental (Cat.No. CON-059)

678.00

244

216 / 262

C.P.central hole basin mixer Number without popup waste system with 450mm long braided hoses jaquar make continental (Cat.No. CON167B)

2330.00

245

217 / 262

C.P.wall mixer with telephone shower arragnement only but without teltphone shower crutch jaquar make continental (Cat.No. CON-217)

Number

2694.00

246

218 / 262

C.p.wall mixer non-telephonic Number shower arrangement jaquar make continental (Cat.No. CON-219)

2360.00

247

219 / 262

C.P.wall mixer(wall mounted model) with telephone shower

2978.00

Number

Number

arrangement only and with telephone shower crutch jaquar make continental (Cat.No. CON267) 248

220 / 262

C.P.wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar make continental (Cat.No. CON-273UPR)

Number

3108.00

249

221 / 262

C.P.sink mixer with swinging casted spout (wall mounted) jaquar make continental (Cat.No. CON-309)

Number

2334.00

250

222 / 262

C.P.sink mixer swinging spout (table mounted model) 450mm long braided hoses jaquar make continental (Cat.No. CON-309B)

Number

2336.00

251

223 / 262

C.P.sink cock with swinging casted Number spout jaquar make continental (Cat.No. CON-347)

1106.00

252

224 / 262

C.P.sink cock with raised 'J' shaped Number swinging casted spout (table mounted) jaquar make continental (Cat.No. CON-359)

1304.00

253

225 / 262

C.p.shower arm 190mm long light Number body with wall flange jaquar make continental (Cat. No. SHA - 477)

436.00

254

226 / 262

C.P.Flush cock with wall flange 25mm with plain knob jaquar make continental (Cat.No. FLR 6081)

Number

1736.00

255

227 / 263

C.P.Towel rail 24" jaquar make Number continental (Cat. No. ACN 1111N )

1040.00

256

228 / 263

C.P.Towel ring square jaquar make Number continental (Cat. No. ACN 1121N )

850.00

257

229 / 263

C.P.Soap dish hooker jaquar make Number continental (Cat. No. AKB 35731 )

904.00

258

230 / 263

C.P.soap dish (polyurethane) jaqua make continental (Cat. No. AQN 7733 )

Number

952.00

259

231 / 263

C.P.Toilet paper holder jaquar make continental (Cat. No. AQ 7751 )

Number

918.00

260

232 / 263

C.P.Toilet rack 24"with lower hanger jaquar make continental (Cat. No. ACN 1181N )

Number

2526.00

261

233 / 263

C.P.Handshower (health faucet)

Number

1102.00

1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ) 262

234 / 263

C.P.Pillar cock jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7011 )

Number

1284.00

263

235 / 263

C.P.Bib cock with wall flange aqua Number make queen's collection (quarter turn fitting) (Cat. No. QQT7037 )

1290.00

264

236 / 263

C.P.2-way bib cock with wall flange Number aqua make queen's collection (quarter turn fitting) (Cat. No. QQT 7041 )

1756.00

265

237 / 263

C.P.Angular stop cock with wall flange aqua make queen's collection (quarter turn fitting) (Cat. No. QQT 7053 )

Number

1230.00

266

238 / 263

C.P.central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7167bB )

Number

3298.00

267

239 / 263

C.P.central hole basin mixer with Number regular spout with popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7169b )

3140.00

268

240 / 263

C.P.central hole basin mixer with Number small spout without popup waste system with 450mm long braided hoses jaquar make queen's collection (quarter turn fitting) (Cat. No. QQT 7171B)

2634.00

269

241 / 263

C.P.wall mixer (wall mounted model) with telephonic shower arrangement only but without crutch jaquar make queen's collection (quarter turn filling) (Cat. No. QQT 7217 )

Number

3562.00

270

242 / 263

C.P.wall mixer non-telephonic shower system jaquar make queen's collection (quarter turn filling) (Cat. No. QQT 7219 )

Number

3264.00

271

243 / 263

C.P.wall mixer (wall mounted model) with telephonic shower arrangement only and with telephone shower crutch jaquar

Number

3906.00

make queen's collection (quarter turn filling) (Cat. No. QQT 7267) 272

244 / 264

C.P.coated stop cock with adjustable wall flenge jaquar make queen's collection (quarter turn fitting)

Number

0.00

273

245 / 264

MCH telephone shower with 1and Number 1/2m long flexible tube and suivel wall hook jaquar make queen's collection (quarter turn fitting)

0.00

274

246 / 264

Hydraulic door closer

Number

670.00

275

247 / 264

CPCV pipe 15mm dia.

Running Meter

66.00

276

248 / 264

CPCV pipe 20mm dia.

Running Meter

82.00

277

249 / 264

CPCV pipe 25mm dia.

Running Meter

112.00

278

250 / 264

CPCV pipe 32mm dia.

Running Meter

186.00

279

251 / 264

CPCV pipe 40mm dia.

Running Meter

222.00

280

252 / 264

CPCV pipe 50mm dia.

Running Meter

370.00

281

253 / 264

Coupling for 15mm dia.

Number

8.65

282

254 / 264


Number

16.00

283

255 / 264


Number

30.00

284

256 / 264


Number

50.00

285

257 / 264


Number

72.00

286

258 / 264


Number

152.00

287

259 / 264

Elbow 90 Degree for 15mm dia.

Number

12.00

288

260 / 264


Number

22.00

289

261 / 264


Number

43.00

290

262 / 264


Number

76.00

291

263 / 264


Number

122.00

292

264 / 264


Number

252.00

293

265 / 264

Tea for 15mm dia.

Number

15.00

294

266 / 264

Tee for 20mm dia.

Number

36.00

295

267 / 264

Tee for 25mm dia.

Number

54.00

296

268 / 264

Tee for 32mm dia.

Number

100.00

297

269 / 264

Tee for 40mm dia.

Number

148.00

298

270 / 264

Tee for 50mm dia.

Number

326.00

299

271 / 265

End cap for 15mm dia.

Number

6.00

300

272 / 265


Number

12.00

301

273 / 265


Number

18.00

302

274 / 265


Number

36.00

303

275 / 265


Number

52.00

304

276 / 265


Number

112.00

305

277 / 265

Ball valves for 15mm dia.

Number

430.00

306

278 / 265


Number

494.00

307

279 / 265


Number

616.00

308

280 / 265


Number

1166.00

309

281 / 265


Number

1776.00

310

282 / 265


Number

2488.00

311

283 / 265

Male adapter (Brass Threads) for 15mm dia.

Number

128.00

312

284 / 265


Number

158.00

313

285 / 265


Number

254.00

314

286 / 265


Number

530.00

315

287 / 265


Number

662.00

316

288 / 265


Number

1264.00

317

289 / 265

Male adapter (Plastic Threads) for Number 15mm dia.

12.00

318

290 / 265


20.00

319

291 / 265


30.00

320

292 / 265


46.00

321

293 / 265


68.00

322

294 / 265


132.00

323

295 / 265

Female adapter (Brass Threads) for 15mm dia.

Number

128.00

324

296 / 265


Number

164.00

325

297 / 265


Number

218.00

326

298 / 266

Female adapter (Brass Threads)

Number

538.00

for 32mm dia. 327

299 / 266


Number

604.00

328

300 / 266


Number

1128.00

329

301 / 266

Female adapter (Plastic Threads) for 15mm dia.

Number

16.00

330

302 / 266


Number

26.00

331

303 / 266


Number

38.00

332

304 / 266

Union for 15mm dia.

Number

140.00

333

305 / 266

Union for 20mm dia.

Number

200.00

334

306 / 266

Union for 25mm dia.

Number

228.00

335

307 / 266

Union for 32mm dia.

Number

298.00

336

308 / 266

Union for 40mm dia.

Number

450.00

337

309 / 266

Union for 50mm dia.

Number

828.00

338

310 / 266

Cross for 15mm dia.

Number

24.00

339

311 / 266

Cross for 20mm dia.

Number

52.00

340

312 / 266

Step over Bend 15mm dia.

Number

39.00

341

313 / 266

Step over Bend 20mm dia.

Number

66.00

342

314 / 266

Tee holder for 15mm dia.

Number

6.15

343

315 / 266

Tee holder for 32mm dia.

Number

8.00

344

316 / 266

End plug threaded for 15mm dia.

Number

10.00

345

317a i / 266 R.C.C.Chamber cover with frame 90cm*45cm Heavy Duty 225kg

Number

1982.00

346

317a ii / 266 R.C.C.Chamber cover with frame 90cm*45cm Medium Duty 140kg

Number

1226.00

347

317b i / 266 R.C.C.Chamber cover with frame 60cm*45cm Heavy Duty 160kg

Number

1796.00

348

317b ii / 266 R.C.C.Chamber cover with frame 60cm*45cm Medium Duty 100kg

Number

894.00

349

318i / 267

I.S.I.Ferrul Connection15mm dia.

Number

410.00

350

318ii / 267

I.S.I.Ferrul Connection 20mm dia. Number

664.00

351

318iii / 267


1146.00

352

318iv / 267


1880.00

353

318v / 267


2762.00

354

318vi / 267


4772.00

355

319 / 267

Water meter 15 mm diameter

Number

1158.00

356

320 / 267


Number

1778.00

357

321 / 267


Number

3156.00

358

322 / 267


Number

3640.00

359

323 / 267


Number

8446.00

360

324 / 267


Number

9910.00

361

325 / 267


Number

14108.00

362

329 / 267

Non return Valve 40 mm diameter Number

426.00

363

330 / 267


3236.00

364

331 / 267


4666.00

365

332 / 267


6600.00

366

333New / 267

Colour Wash Hand Basin 0.45 x 0.30

850.00

367

334New / 267

White Glaze Earth Sink 0.6 x 0.2 x Number 0.45

1190.00

368

335New / 267

Clamp for G.I.pipe 200mm

Number

64.00

369

336New / 267

Earopean type glazed W.C.pan 68cm

Number

1442.00

370

337New / 267

Earopean white glazed earthen ware closet pan

Number

1096.00

371

338New / 267

P.V.C. Nahni Trap

Running Meter

172.00

372

339New / 267

P.V.C. Connector. 15 mm dia

Number

86.00

373

999 / 267

G.I.Chain 12mm dia.

Running Meter

0.00

374

999 / 267

G.I.Chain 28mm dia.

Running Meter

0.00

375

999 / 267

G.I.Screws 25mm dia.

Number

0.00

376

999 / 267

Marble Mosaic sink 0.6*0.3m

Number

0.00

377

999 / 267

Alkathene special pipe 256mm dia. Number For drainage purpose 60cm long

0.00

378

18NEW / 268

PVC Nahani Trap 75 mm

Number

100.00

379

19NEW / 268

PVC Nahani Trap 150 mm

Number

150.00

380

20NEW / 268

Anglo Indian W.C. Pan White

Number

3400.00

381

21NEW / 268

Anglo Indian W.C. Pan Colour

Number

5115.00

382

22NEW / 268

P.V.C. Cowl 100 mm

Number

95.00

383

23NEW / 268

Ultra 250 mm. dia. uPVC 90 Number degree junction chamber base with U trap

Number

1189.00

384

24NEW / 268

Ultra 250 mm.dia. uPVC Cover & Frame

Number

456.00

385

25NEW / 268

Ultra 450 mm dia. Polypropylene multiple inlet Inspection chamber base

Number

1944.00

386

26NEW / 268

Shaft pipe 450 mm dia, 460 mm height of HDPE material

Number

2680.00

387

27NEW / 268

R.C.C. Cover & Frame 175 KG.

Number

1700.00

388

28NEW / 268

Ultra 600 mm dia.polypropylene 315 mm St. through,600 mm inbuilt shaft chamber

Number

8240.00

389

29NEW / 268

Shaft pipe 250 mm dia, 470 mm height of uPVC material

Number

456.00

390

30NEW / 268

Ultra 600 mm.dia. SFRC Cover & Frame

Number

8893.00

391

31NEW / 268

uPVC Eccentric reducer 250 x 200 mm

Number

884.00

392

32NEW / 268


Number

730.00

393

33NEW / 268


Number

908.00

394

34NEW / 268


Number

2820.00

395

35NEW / 268

uPVC Blanking Plug 110 mm

Number

38.00

396

36NEW / 268

uPVC Blanking Plug 160 mm

Number

80.00

397

37NEW / 268

uPVC Coupler 110 mm click ring type

Number

150.00

398

38NEW / 268


Number

281.00

399

39NEW / 268


Number

597.00

400

40NEW / 268

uPVC 90 degree bend

Number

183.00

401

41NEW / 268

uPVC Insitu Adapter 110 mm (F)

Number

322.00

402

42NEW / 268

uPVC Insitu Adapter 160 mm (F)

Number

516.00

403

43NEW / 268

uPVC Bend 87.5 degree 110 mm CR

Number

183.00

404

44NEW / 268

Rubber lubricant

Litre

144.00

405

45NEW / 268

Eco- drain 110 mm SN 8 Nu- Drain Running Upvc pipes Meter

252.00

406

46NEW / 268


427.00

407

47NEW / 268


644.00

408

48NEW / 268

Bracket D type C. P.

Number

48.00

409

49NEW / 268

Water jet with accessories

Number

450.00

410

50NEW / 268

Ultra Shaft 250x470mm

Number

452.00

Building-Bd-W : Miscellaneous 1

1 / 267

Barbed Wire

Kilogram

72.00

2

2 / 267

Chunam / White lime Powder

Kilogram

14.00

3

3 / 267

Coir String

Kilogram

88.00

4

4 / 267

Copper Plate

Kilogram

358.00

5

5 / 267

Copper upper terminal (Lightening)

Kilogram

348.00

6

6 / 267

Copper Tape width 25mm*3mm Kilogram thick

358.00

7

7 / 268

Cripped wire 3' - 0" , 4' - 0" and Square 5' - 0" wide Meter

176.00

8

8 / 268

Maxphalt

Metric Tonne

8942.00

9

9 / 268

Mosquito proof Nylone net

Square Meter

70.00

10

10 / 268

Nylone Rope

Kilogram

186.00

11

11 / 268

Tarat 36" width (Gunny cloth)

Running Meter

28.00

12

12 / 268

Glass Brick

Square Meter

1812.00

13

13 / 268

Tatti

Square Meter

16.00

14

14New / 268 T.W. Bullies 100 mm dia Upto 3.50 Mtr

Running Meter

586.00

15

15New / 268 Aluminium Strips 50 mm x 3 mm Running Meter

60.00

16

16New / 268 Clorophyriphoas

Litre

220.00

17

17New / 268 D.D.V.P.

Litre

310.00

18

18New / 268 Malathion

Litre

160.00

19

19New / 268 Pine Oil

Litre

68.00

20

20New / 268 Thermocol

Square Meter

2414.00

21

21New / 268 Concentina Coil Wire

Running Meter

305.00

22

22New / 268 Lightening Conductor

Number

8032.00

23

23New / 268 Chain link 3' - 0" , 4' - 0" and 5' Square - 0" wide Meter

164.00

24

24New / 268 Salt

11.00

Kilogram

CD Works-CD : cross dranage works 1

1 / 269

R.C.C.Pipe 1200mm dia.(Np3)2.5m long with coller IRC

Number

18108.00

2

2 / 269


Number

17540.00

3

3 / 269


Number

13328.00

4

4 / 269


Number

11880.00

5

5 / 269


Number

10662.00

6

6 / 269


Number

8196.00

7

7 / 269


Number

6160.00

8

8 / 269


Number

4860.00

9

9 / 269


Number

4072.00

10

10 / 269

R.C.C.pipe Np2 class 1000mm dia. 2.5m long

Number

7612.00

11

10a / 269

R.C.C.NP2 Pipe Collar 1000 mm Number Dia.

1078.00

12

11 / 269


10898.00

13

11a / 269

R.C.C.NP2 Pipe Collar 1200 mm Number Dia.

Number

1282.00

14

12 / 269


Number

0.00

15

13 / 269


Number

6598.00

16

13a / 269

R.C.C.NP2 Pipe Collar 900 mm Dia.

Number

748.00

17

14 / 269


Number

5428.00

18

14a / 269


Number

640.00

19

15 / 269


Number

4602.00

20

16 / 269


Number

3226.00

21

16a / 269


Number

428.00

22

17 / 269


Number

2630.00

23

18 / 269


Number

2100.00

24

18a / 269


Number

268.00

25

19 / 269

R.C.C.pipe Np2 class 100mm dia. 2m long

Number

530.00

26

20 / 269


Number

576.00

27

21 / 269


Number

652.00

28

22 / 269


Number

1022.00

29

23 / 269

RCC Pipe NP 4 heavy duty non Running presure pipe 1000 mm diameter Meter

7272.00

30

24 / 269

RCC Pipe NP 4 heavy duty non Running presure pipe 1200 mm diameter Meter

9034.00

31

25 / 269

RCC Pipe NP 4 heavy duty non presure pipe 900 mm diameter

5680.00

Running Meter

General-General 1

1 / 239

Cement

Metric Tonne

6000.00

2

2 / 239

Tor Steel (H.Y.S.D.)

Metric Tonne

47300.00

3

3 / 239

Mild Steel

Metric Tonne

45700.00

4

4 / 239

Structural Steel

Metric Tonne

48600.00

5

5 / 239

Tubular Steel

Metric Tonne

53400.00

6

6 / 239

TMT FE - 500

Metric Tonne

47900.00

7

7 / 239

High Tensile Steel

Metric Tonne

75200.00

8

8 / 239

Bitumen VG 10 (Bulk) (80/100)

Metric Tonne

53665.00

9

9 / 239


Metric Tonne

54695.00

10

10 / 239


Metric Tonne

58621.00

11

11 / 239

Bitumen VG 30 (Packed) (60/70) Metric Tonne

58685.00

12

12 / 239

Bitumen VG 10 (Packed) (80/100)

Metric Tonne

57656.00

13

13 / 239

Bitumen VG 40 (Packed) (30/40) Metric Tonne

62612.00

14

14A / 239

Sand - Natural

Cubic Meter

1010.00

15

14B / 239

Sand - Crushed

Cubic Meter

785.00

16

14C / 239

Sand - Course

Cubic Meter

800.00

17

15A / 239

Bricks II Class

1000 Nos.

5950.00

18

15B i / 239

Fly Ash Brick size 230*100*80 mm

1000 Nos.

7045.00

19

15B ii / 239

Fly Ash Brick size 230*150*80 mm

1000 Nos.

8100.00

20

16 / 239

Rubble stone Blasted

Cubic Meter

345.00

21

17 / 239

Aggregate 60 mm Blasted (Hand Cubic Broken) Meter

532.00

22

18 / 239

Aggregate 40 mm (Hand Broken) Blasted.

Cubic Meter

610.00

23

19 / 239

Aggregate above 25 mm and upto 40mm Crushed40 mm (Hand Broken) Blasted.

Cubic Meter

654.00

24

20 / 239

Aggregate 25 mm

Cubic Meter

700.00

25

21 / 240

Aggregate 20 mm

Cubic Meter

710.00

26

22 / 240

Aggregate 12 mm

Cubic Meter

710.00

27

23 / 240

Aggregate 10 mm

Cubic Meter

710.00

28

24 / 240

Aggregate 6 mm

Cubic Meter

710.00

29

25 / 240

Stone Dust

Cubic Meter

413.00

30

26 / 240

Soft Murum

Cubic Meter

181.00

31

27 / 240

Hard Murum

Cubic Meter

186.00

32

28 / 240

Rubber Modified Bitumen(Bulk)CR-60 at Mumbai

Metric Tonne

0.00

33

29 / 240


Metric Tonne

0.00

34

30 / 240


Metric Tonne

0.00

35

31 / 240

Stone Boulder of size 150mm and below at Cruser Plant

Cubic Meter

345.00

36

32 / 240

Bitumen (Cationic Emulsion)

Metric Tonne

50207.00

37

33 / 240

Bitumen (emulsion)

Metric Tonne

50207.00

38

34 / 240

Credit for excavated rock found suitable for use

Cubic Meter

345.00

39

35 / 240

Joint Sealant compound

Kilogram

112.00

40

36 / 240

Unstaked lime

Metric Tonne

7428.00

41

37 / 240

Water

1000 Litre

134.00

42

38New / 240 White Cement

Metric Tonne

20450.00

43

39New / 240 Plastizer

Litre

110.00

44

40New / 240 Stainless Steel Plate

Kilogram

330.00

45

2NEW / 241 New Material No 2

Cubic Meter

100.00

46


Cubic Meter

100.00

47


Cubic Meter

100.00

48


Cubic Meter

100.00

49


Cubic

100.00

Meter 50


Cubic Meter

100.00

51


Cubic Meter

100.00

52


Cubic Meter

100.00

53

10NEW / 241

Cubic Meter

100.00

New Material No 10 General-MORTH: Roads

1

1M / 1

Bitumen VG-40 (bulk (30-40 grade))

Metric Tonne

0.00

2

2M / 1

Stone Boulder of size 150 mm and below at Cruser Plant

Cubic Meter

345.00

3

3M / 1

Supply of quarried stone 150 200 mm size for Hand Broken at site

Cubic Meter

345.00

4

4M / 1

Boulder with minimum size of 300 Cubic mm for Pitching at Site Meter

345.00

5

5M / 1

Coarse sand at Mixing Plant

Cubic Meter

0.00

6

6M / 1

Coarse sand at Site

Cubic Meter

0.00

7

7M / 1

Fine sand at Site

Cubic Meter

1010.00

8

8M / 1

Moorum at Site

Cubic Meter

186.00

9

9M / 1

Gravel/Quarry spall at Site

Cubic Meter

0.00

10

10M / 1

Granular Material or hard murrum Cubic for GSB works at Site Meter

186.00

11

11M / 1

Granular Material or hard murrum Cubic for GSB works at Mixing Plant Meter

186.00

12

12M / 1

Fly ash conforming to IS: 3812 ( Part II & I) atHMP Plant / Batching Plant / Crushing Plant

Cubic Meter

114.00

13

13M / 1

Filter media/Filter Material as per Cubic Table 300-3 (MoRT&H Meter Specification)

415.00

14

14M / 1

Close graded Granular sub-base Material 53 mm to 9.5 mm

Cubic Meter

621.00

15

15M / 1

Close graded Granular sub-base Material 37.5 mm to 9.5 mm

Cubic Meter

660.00

16

16M / 1

Close graded Granular sub-base

Cubic

705.00

Material 26.5 mm to 9.5 mm

Meter

17

17M / 1


Cubic Meter

635.00

18

18M / 1


Cubic Meter

635.00

19

19M / 1

Close graded Granular sub-base Material 4.75mm to 2.36 mm

Cubic Meter

413.00

20

20M / 1

Close graded Granular sub-base Material 4.75mm to 75 micron mm

Cubic Meter

413.00

21

21M / 1

Close graded Granular sub-base Material 2.36 mm

Cubic Meter

413.00

22

22M / 1

Stone crusher dust finer than 3mm with not more than 10% passing 0.075 sieve.

Cubic Meter

413.00

23

23M / 1

Coarse graded Granular sub-base Cubic Material 2.36 mm & below Meter

413.00

24

24M / 1

Coarse graded Granular sub-base Cubic Material 4.75mm to 75 micron Meter mm

413.00

25

25M / 1

Coarse graded Granular sub-base Cubic Material 4.75 mm to 2.36 mm Meter

413.00

26

26M / 1


635.00

27

27M / 1


635.00

28

28M / 1


705.00

29

29M / 1


660.00

30

30M / 1

Coarse graded Granular sub-base Cubic Material 53 mm to 26 .5mm Meter

621.00

31

31M / 1

Aggregates below 5.6 mm

Cubic Meter

413.00

32

32M / 1

Aggregates 22.4 mm to 2.36 mm Cubic Meter

635.00

33

33M / 1

Aggregates 22.4 mm to 5.6 mm

Cubic Meter

635.00

34

34M / 1

Aggregates 45 mm to 2.8 mm

Cubic Meter

621.00

35

35M / 1


Cubic Meter

618.00

36

36M / 1


Cubic Meter

566.00

37

37M / 1


Cubic Meter

621.00

38

38M / 1


Cubic Meter

566.00

39

39M / 1

Aggregates 63 mm to 45 mm

Cubic Meter

571.00

40

40M / 1


Cubic Meter

532.00

41

41M / 1


Cubic Meter

611.00

42

42M / 1


611.00

43

43M / 1


635.00

44

44M / 1

Aggregates 13.2 mm to 5.6 mm

Cubic Meter

635.00

45

45M / 1

Aggregates 13.2 mm to 10 mm

Cubic Meter

710.00

46

46M / 1


Cubic Meter

710.00

47

47M / 1


Cubic Meter

705.00

48

48M / 1


Cubic Meter

710.00

49

49M / 1


Cubic Meter

673.00

50

50M / 1


Cubic Meter

654.00

51

51M / 1

Aggregates 6 mm nominal size

Cubic Meter

710.00

52

52M / 1


Cubic Meter

710.00

53

53M / 1

Aggregates 13.2/12.5 mm nominal size

Cubic Meter

710.00

54

54M / 1


Cubic Meter

710.00

55

55M / 1


Cubic Meter

700.00

56

56M / 1


Cubic Meter

610.00

57

57M / 1

AC pipe 100 mm dia

Running Meter

105.00

58

58M / 1

Acrylic polymer bonding coat

Litre

330.00

59

59M / 1

Alluminium Paint

Litre

0.00

60

60M / 1

Aluminium alloy plate 2mm Thick Square Meter

319.00

61

61M / 1

Aluminium alloy/galvanised steel

Metric Tonne

45375.00

62

62M / 1

Aluminium sheeting fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable

Square Meter

14058.00

63

63M / 1

Aluminium studs 100 x 100 mm fitted with lense reflectors

Number

0.00

64

64M / 1

Barbed wire

Kilogram

0.00

65

65M / 1

Bearing (Cost of parts)

Number

32815.00

66

66M / 1

Bearing (Cast steel rocker bearing Number assembly of 250 tonne )

53875.00

67

67M / 1

Bearing (Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation,)

Number

15310.00

68

68M / 1

Bearing (Forged steel roller bearing of 250 tonne

Number

119450.00

69

69M / 1

Bearing (Pot type bearing assembly consisting of a metal piston supported by a disc, PTFE pads providing sliding surfaces against stainless steel mating together with cast steel assemblies/fabricated structural steel assemblies duly painted with all components

Number

45100.00

70

70M / 1

Bearing (PTFE sliding plate bearing assembly of 80 tonnes )

Number

15435.00

71

71M / 1

Bearing (Supply of sliding plate bearing of 80 tonne)

Number

15435.00

72

72M / 1

Bentonite

Kilogram

26.00

73

73M / 1

Binding wire

Kilogram

64.00

74

74M / 1

Bitumen ( Cationic Emulsion )

Metric Tonne

50207.00

75

75M / 1

Bitumen VG-30 (bulk (60-70 grade))

Metric Tonne

54695.00

76

76M / 1

Bitumen VG -10 (bulk (80-100 grade ))

Metric Tonne

53665.00

77

77M / 1

Bitumen (Cutback )

Metric

50207.00

Tonne 78

78M / 1

Bitumen (emulsion)

Metric Tonne

50207.00

79

79M / 1

Bitumen (modified graded) (bulk Cr-60)

Metric Tonne

0.00

80

80M / 1

Brick

Each

0.00

81

81M / 1

C.I.shoes for the pile 75mm to 100mm

Number

225.00

82

82M / 1

Cement

Metric Tonne

6000.00

83

83M / 1

Cold twisted bars (HYSD Bars)

Metric Tonne

0.00

84

84M / 1

Coller for joints 300 mm dia

Number

0.00

85

85M / 1

Compressible Fibre Board(20mm thick)

Square Meter

1445.00

86

86M / 1

Connectors/ Staples

Each

0.00

87

87M / 1

Copper Plate(12m long x 250mmwide)

Kilogram

0.00

88

88M / 1

Corrosion resistant Structural steel

Metric Tonne

0.00

89

89M / 1

Corrugated sheet, 3 mm thick, "Thrie" beam section railing

Kilogram

0.00

90

90M / 1

Credit for excavated rock found suitable for use

Cubic Meter

0.00

91

91M / 1

Curing compound

Litre

0.00

92

92M / 1

Delineators from ISI certified firm Each as per the standard drawing given in IRC - 79

0.00

93

93M / 1

Earth Cost or compensation for Cubic earth taken from private land Meter

70.67

94

94M / 1

Elastomeric slab seal expansion joint assembly manufactured by using chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of IRC: 83 (part II),

8015.00

95

95M / 1

Electric Detonators @ 1 detonator 100 Nos. for 1/2 gelatin stick of 125 gms each

14.00

96

96M / 1

Epoxy compound with accessories Kilogram for preparing epoxy mortar

416.00

97

97M / 1

Epoxy mortar

345.00

98

98M / 1

Galvanised structural steel plate 6 Kilogram mm thick

Running Meter

Kilogram

52.00

99

99M / 1

Epoxy resin-hardner mix for prime Kilogram coat

421.00

100

100M / 1

Flag of red color cloth 600 x 600 mm

Each

0.00

101

101M / 1

Flowering Plants

Each

0.00

102

102M / 1

Galvanised MS flat clamp

Number

0.00

103

103M / 1

Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm dia. GI wire in rolls of required size.

Square Meter

180.00

104

104M / 1

Galvanised structural steel plate 12 mm thick

Kilogram

52.00

105

105M / 1

Epoxy resin-hardner mix for seal coat

Kilogram

569.00

106

106M / 1

Geo grids

Square Meter

295.00

107

107M / 1

Geomembrane

Square Meter

561.00

108

108M / 1

Geonets

Square Meter

200.00

109

109M / 1

Geotextile

Square Meter

100.00

110

110M / 1

Geotextile filter fabric

Square Meter

100.00

111

111M / 1

GI bolt 10 mm Dia

Number

12.00

112

112M / 1

Grouting pump with agitator

Hour

80.00

113

113M / 1

Grass (Doob)

Kilogram

0.00

114

114M / 1

Grass (Fine)

Kilogram

0.00

115

115M / 1

HDPE pipes 75mm dia

Running Meter

0.00

116

116M / 1

HDPE pipes 90mm dia

Running Meter

0.00

117

117M / 1

Hedge plants

Each

0.00

118

118M / 1

Helical pipes 600mm diameter

Running Meter

1562.00

119

119M / 1

Hot applied thermoplastic compound

Litre

0.00

120

120M / 1

HTS strand

Metric Tonne

75200.00

121

121M / 1

Joint Sealant Compound

Kilogram

116.00

122

122M / 1

Jute netting, open weave, 2.5 cm Square square opening for seeding and Meter Mulching

0.00

123

123M / 1

LDO

Litre

73.18

124

124M / 1

M.S. Clamps

Number

49.00

125

125M / 1

M.S. Clamps

Kilogram

49.00

126

126M / 1

M.S.shoes @ 35 Kg per pile of 15 Kilogram m

59.00

127

127M / 1

Mild Steel bars

45700.00

128

128M / 1

Modular strip/box seal expansion Running joint including anchorage catering Meter to a horizontal movement beyond 70 mm and upto 140mm assembly comprising of edge beams, central beam,2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative

107525.00

129

129M / 1

Modular strip/box seal expansion Running joint catering to a horizontal Meter movement beyond 140mm and upto 210mm box/box seal joint assembly containing 3 modules/cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative

210495.00

130

130M / 1

Nipples 12mm

Number

46.00

131

131M / 1

Nuts and bolts

Kilogram

68.00

132

132M / 1

Paint

Litre

0.00

133

133M / 1

Pavement Marking Paint

Litre

240.00

134

134M / 1

Paving Fabric

Square Meter

0.00

135

135M / 1

Perforated geosynthetic pipe 150 Running mm dia Meter

0.00

136

136M / 1

Perforated pipe of cement concrete, internal dia 100 mm

Running Meter

0.00

137

137M / 1

Pesticide

Kilogram

0.00

138

138M / 1

Pipes 200 mm dia, 2.5 m long for Running drainage Meter

345.00

139

139M / 1

Plastic sheath, 1.25 mm thick for Square

0.00

Metric Tonne

dowel bars

Meter

140

140M / 1

Plastic tubes 50 cm dia, 1.2 m high

Number

0.00

141

141M / 1

Polymer braids

Running Meter

0.00

142

142M / 1

Pre moulded Joint filler,25 mm thick for expansion joint.

Square Meter

0.00

143

143M / 1

Pre-coated stone chips of 13.2 mm nominal size

Cubic Meter

0.00

144

144M / 1

Preformed continuous Running chloroprene elastomer or closed Meter cell foam sealing element with high tear strength, vulcanised in a single operation for the full length of a joint to ensure water tightness.

633.00

145

145M / 1

Pre-moulded asphalt filler board

Square Meter

0.00

146

146M / 1

Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days

Kilogram

300.00

147

147M / 1

Primer for steel

Litre

0.00

148

148M / 1

Quick setting compound

Kilogram

0.00

149

149M / 1

Random Rubble Stone

Cubic Meter

0.00

150

150M / 1

RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia

Running Meter

7272.00

151

151M / 1


Running Meter

9034.00

152

152M / 1


Running Meter

0.00

153

153M / 1

Reflectorising glass beads

Kilogram

0.00

154

154M / 1

Reinforcement strips 60 mm wide Running 5 mm thick as per clause 3102. Meter (Copper Strips)

0.00

155

155M / 1

Reinforcement strips 60 mm wide Running 5 mm thick as per clause 3102. Meter (Galvanised carbon steel strips)

0.00

156

156M / 1

Reinforcement strips 60 mm wide Running 5 mm thick as per clause 3102. Meter (Glass reinforced polymer/fibre reinforced polymer/polymeric strips)

0.00

157

157M / 1

Reinforcement strips 60 mm wide Running 5 mm thick as per clause 3102. Meter

0.00

(Stainless steel strips) 158

158M / 1

Reinforcement strips 60 mm wide Running 5 mm thick as per clause 3102. Meter Aluminium strips)

0.00

159

159M / 1

Rivets

Each

0.00

160

160M / 1

Sand bags (Cost of sand and Empty cement bag)

Number

6.00

161

161M / 1

Sapling 2 m high 25 mm dia

Each

0.00

162

162M / 1

Scrap tyres of size 900 x 20

Number

0.00

163

163M / 1

Seeds

Kilogram

0.00

164

164M / 1

Selected earth

Cubic Meter

0.00

165

165M / 1

Separation Membrane of Square impermeable plastic sheeting 125 Meter micron thick

0.00

166

166M / 1

Sheathing duct

Running Meter

145.00

167

167M / 1

Shrubs

Each

0.00

168

168M / 1

Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing

Cubic Meter

0.00

169

169M / 1

Sodium vapour lamp

Each

0.00

170

170M / 1

Square Rubble Coursed Stone

Cubic Meter

0.00

171

171M / 1

Steel circular hollow pole of standard specification for street lighting to mount light at 5 m height above deck level

Each

0.00

172

172M / 1

Steel circular hollow pole of standard specification for street lighting to mount light at 9 m height above road level

Each

0.00

173

173M / 1

Steel drum 300 mm dia 1.2 m high/empty bitumen drum

Number

0.00

174

174M / 1

Steel helmet and cushion block on Kilogram top of pile head during driving.

0.00

175

175M / 1

Steel pipe 25 mm external dia as Running per IS:1239 Meter

0.00

176

176M / 1

Steel pipe 50 mm external dia as Running per IS:1239 Meter

0.00

177

177M / 1

Steel wire rope 20 mm

Kilogram

56.00

178

178M / 1

Steel wire rope 40 mm

Kilogram

56.00

179

179M / 1

Strip seal expansion join

Running Meter

8225.00

180

180M / 1

Structural Steel

Metric Tonne

0.00

181

181M / 1

Super plastisizer admixture IS marked as per 9103-1999

Kilogram

0.00

182

182M / 1

Synthetic Geogrids as per clause Square 3102.8 and approved design and Meter specifications.

0.00

183

183M / 1

Through and bond stone

Each

0.00

184

184M / 1

Tie rods 20mm diameter

Number

0.00

185

185M / 1

Tiles size 300 x 300 mm and 25 mm thick (polish shahabad)

Each

25.00

186

186M / 1

Timber

Cubic Meter

0.00

187

187M / 1

Traffic cones with 150 mm reflective sleeve

Number

0.00

188

188M / 1

Tube anchorage set complete with bearing plate, permanent wedges etc

Number

9350.00

189

189M / 1

Unstaked lime

Metric Tonne

0.00

190

190M / 1

Water

Kilogram

0.00

191

191M / 1

Water based cement paint

Litre

175.00

192

192M / 1

Welded steel wire fabric

Kilogram

0.00

193

193M / 1

Wire mesh 50mm x 50mm size of Square 2.8mm wire Meter

0.00

194

194M / 1


Kilogram

0.00

195

195M / 1


Litre

0.00

196

196M / 1

LDO for steam curing

Cubic Meter

0.00

197

197M / 1

Wooden staff for fastening of flag Each 25 mm dia, one m long

0.00

Roads-MORT & H Bituminous Construction 1

1 / 270

Fly Ash confirming to IS: 3812 (part II and I) at MHP Plant / Batching Plant / Crushing Plant

Cubic Meter

103.00

2

2 / 270

Filter media / filter material as per table 300 - 3 (MORT&H Specifications)

Cubic Meter

375.00

3

3 / 270

AC pipe 100 mm dia

Running Meter

95.00

4

4 / 270

Alluminium alloy plate 2 mm thick

Square Meter

430.00

5

5 / 270

Alluminium sheeting sheet with Square encapsulated lense type Meter reflective sheeting including 2% towards towards lettering, cost of angle iron, cost of drilling holes, nuts bolts etc and signs as applicable.

14060.00

6

6 / 270

Bearing (Cost of fix point bearing 250 MT)

Number

32890.00

7

8 / 270

Bearing ( Elastomeric bearing Number assembly consisting of 7 internal layers of elastomar bounded to 6 nos internal reinforcing steel laminate by the process of vulcanisation).

16400.00

8

9 / 270

Bearing ( Forged steel roller bearing of 250 tonne)

110000.00

9

10 / 270

Bearing ( Pot type bearing Number assembly consisting of a metal piston supported by a disc PTFE pads 250 MT

39225.00

10

11 / 270

Bearing (PTFE sliding plate bearing assembly of 80 tonnes) ( polytetra fluoro ethylene)

Number

13220.00

11

12 / 270

Bearing (Supply of fixed pot bearing of 80 tonnes)

Number

10230.00

12

13 / 271

Bentonite

Kilogram

35.00

13

14 / 271

Copper plate (12 mm long x 250 Kilogram mm vide)

0.00

14

15 / 271

Electric detonators @ 1 detonator for 1/2 preparing epoxy mortar

1200.00

15

16 / 271

Epoxy Compound with Kilogram accessories for preparing epoxy mortar

550.00

16

17 / 271

Epoxy primer .

Kilogram

550.00

17

18 / 271

Gelatine 80%

Kilogram

90.00

18

19 / 271

Geo grids

Square Meter

270.00

19

20 / 271

Geomembrance

Square Meter

510.00

20

21 / 271

Geonets

Square Meter

190.00

21

22 / 271

Geotextiles

Square Meter

90.00

22

23 / 271

Geotextiles filter fabric

Square

90.00

Number

100 Nos.

Meter 23

24 / 271

G.I. Bolt 10 mm dia

Number

12.00

24

25 / 271

Grouting pump with agitator

Hour

70.00

25

26 / 271

Helical pipes 600 mm diameter

Running Meter

1420.00

26

27 / 271

Joint Sealant compound.

Kilogram

105.00

27

28 / 271

M.S. Shoes @ 35 Kg per pile of 15 M

Kilogram

48.00

28

29 / 271

Modular strip / box seal Running expansion joints including Meter anchorage catering to horizontal movements beyond 70 mm and upto 140 mm assembly comprising of edge beams, centria beam, 2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative.

107525.00

29

30 / 271

Modular strip / box seal Running expansion joints including Meter anchorage catering to horizontal movements beyond 40 mm and upto 210 mm box / box seal joint assembly containing 3 module / cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative.

210495.00

30

31 / 271

Nipples 12 mm diameter and 50.9" long

Number

46.00

31

32 / 271

Strip seal expansion joint

Running Meter

8225.00

Roads-Rd

: Road Works

1

1 / 268

R.C.C.Boundary stone 75*20*15cm

Number

370.00

2

2 / 268

R.C.C.Guard stone (Standard Size )

Number

370.00

3

2a / 268

Trap Guard Stone

Number

78.00

4

3 / 268

R.C.C.Kilometer Stone

Number

1462.00

5

3a / 268

R.C.C. Fifth Kilometer Stone

Number

1692.00

6

4 / 268

Laterite Oversize Metal

Cubic Meter 160.00

7

5 / 268

Laterite Rubble on Quarry

Cubic Meter 136.00

8

6 / 268

Laterite Stones 45*22*20 cm

Number

32.00

9

7 / 268


Number

32.00

10

8 / 268


Number

34.00

11

9 / 268

Trap metal 40mm blasted

Cubic Meter 328.00

12

10 / 268

Trap metal 40mm un-blasted

Cubic Meter 322.00

13

11 / 268

Bitumen primer

Litre

90.00

14

12 / 268

Fire wood

Quintal

284.00

15

13 / 268

Solvent

Litre

16.00

16

14 / 268

Gravel at nalla bed

Cubic Meter 242.00

17

15 / 268

Delinators from ISI Certified firm as per the standard drawing given in IRC 79

Each

750.00

18

16 / 268


Litre

80.00

19

17 / 268

LDO

Litre

73.18

20

18 / 268


Kilogram

74.00

21

19 / 268

Traffic cones with 150 mm reflective sleeve

Number

738.00

22

23New / 268 Stoving Paint

Litre

676.00

23

25New / 268 Protective Transperent Coat

Litre

800.00

24

26New / 268 Retroreflective Paint Tape

Square Centimeter

0.60

10: LABOUR MASTER Item Number Name

Unit

Rate

1 / 273

Black Smith With Tools - II Class

Day

298.00

2 / 273

Stone Cutter With Tools - Semi Skilled

Day

294.00

3 / 273

Mason I Class Skilled

Day

325.00

4 / 273

Mason II Class Skilled

Day

298.00

5 / 273

Carpenter I Class Skilled

Day

325.00

6 / 273

Carpenter II Class Skilled

Day

294.00

7 / 273

Plumber With Tools - Skilled

Day

302.00

8 / 273

Glazier With Tools - Skilled

Day

302.00

9 / 273

Tin Smith With Tools - Semi Skilled

Day

294.00

10 / 273

Painter I Class Skilled

Day

302.00

11 / 273

Painter II Class Skilled

Day

298.00

12 / 273

Head Fitter With Tools - Skilled

Day

302.00

13 / 273

Mechanic

Day

302.00

14 / 273

Lorry Driver / Mixer Operator

Day

302.00

15 / 273

Welder / Driller - Skilled

Day

302.00

16 / 273

Polishman - Semi Skilled

Day

298.00

17 / 273

Assistant Plumber - Skilled

Day

302.00

18 / 273

Maistry Skilled / Supervisor / Mate

Day

302.00

19 / 273

Vibrator Operator - Skilled

Day

298.00

20 / 273

Skilled Labour

Day

298.00

21 / 273

Boreman Skilled

Day

298.00

22 / 273

Asphalt Sprayer Skilled

Day

298.00

23 / 273

Minor or Blaster Semi Skilled

Day

294.00

24 / 273

Quarry Man - Semi Skilled

Day

294.00

25 / 273

Painter / White Washer - Semi Skilled

Day

290.00

26 / 273

Labour for Excavation in Hard Rock (Un Blast)

Day

290.00

27 / 273

Tile Turner Semi Skilled

Day

294.00

28 / 273

Mazdoor - For Polishing

Day

294.00

29 / 273

Bar Bender Skilled

Day

294.00

30 / 273

Bhisti (Mixing / Curing) - Semi Skilled

Day

294.00

31 / 273

Mukadam - Semi Skilled

Day

294.00

32 / 273

Tar Handler - Semi Skilled

Day

294.00

33 / 274

Helper Un Skilled

Day

290.00

34 / 274

Tree Cutter - Semi Skilled

Day

294.00

35 / 274

Navaghani

Day

294.00

36 / 274

Mazdoor - Unskilled Heavy Male Day

294.00

37 / 274

Mazdoor - Unskilled Heavy Female

Day

290.00

38 / 274

Below Boy

Day

290.00

39 / 274

Filler With Tools I Class Skilled

Day

302.00

40 / 274

Filler With Tools II Class Skilled Day

298.00

41 / 274

Gun Man for Guniting

Day

298.00

42 / 274

Laboratory Assistant

Day

298.00

43 / 274

Labour for Tile Turning

Day

290.00

44 / 274

Excavator - Unskilled Heavy

Day

290.00

45 / 274

Breaker - Semi Skilled

Day

294.00

46 / 274

Hole Driller Semi Skilled

Day

294.00

47 / 274

Chiseler Semi Skilled

Day

294.00

48 / 274

Foreman Skilled

Day

298.00

49 / 274

Bandhani Semi Skilled

Day

294.00

50 / 274

Emgraver for lettering Skilled

Day

298.00

51 / 274

Frabi - Weld - Drilling

Day

298.00

52 / 274

Khalashi / Diers

Day

360.00

53 / 274

Jack Hammer Operator

Day

302.00

54 / 274

Electrician

Day

302.00

55 / 274

Welder Skilled

Day

302.00

56 / 274

Labour for Traffic Regulation

Day

290.00

57 / 274

Watchman

Day

290.00

58 / 274

Compressor Operator / Driver

Day

302.00

59 / 274

Supervisor / Mate

Day

302.00

60 / 274

Blacksmith (1st Class) Welder / Day Plumber / Electrician.

302.00

61 / 274

Blaster (Stone Cutter)

Day

294.00

62 / 274

Mali

Day

294.00

63 / 274

Mazdoor / Dresser (Semi Skilled)

Day

294.00

64 / 274

Mazdoor / Dresser Sinker B116 Skilled

Day

298.00

65 / 274

Medical Officer

Day

1402.00

66 / 274

Operator (grouting)

Day

302.00

67 / 274

Para Medical Personnel

Day

705.00

Item Number

Name

Unit

Rate

0New / 0

Road Roller (8 to 10 tonnes)

Day

643.00

1 / 275

Water Tanker 7.50 Ton.

Hour

625.00

2 / 275

Vibrator (Electrical)

Hour

143.00

3 / 275

Reversible drum concrete mixer with SCADA

Hour

495.00

4 / 275

Ashphalt Mixer

Hour

328.00

5 / 275

Boiler (Ashphalt)

Hour

120.00

6 / 275

Country Craft with Boatman

Day

370.00

8 / 275

Weighing Machine( Per Truck) Number

69.00

9 / 275

Air Compressor

Hour

723.00

10 / 275

Guiniting Gun

Hour

235.00

11 / 275

Rent for water tank

Trip

400.00

12 / 275

Bouser

Kilometer

47.00

13 / 275

Paver finisher

Hour

1175.00

14 / 275

hotmix Plant(30 to 40 tonnes) Hour

3750.00

15 / 275

Road Roller (8 to 10 tonnes)

Hour

643.00

16 / 275

Heating charges for hotmix plant

Hour

2705.00

17 / 275

Road Roller( 4 to 5 tonnes)

Hour

330.00

18 / 275

Crusher

Hour

662.00

19 / 275

The polishing machine with Polishman

Day

917.00

20 / 275

Welding machine

Day

305.00

21 / 275

Electric drill machine

Day

217.00

22 / 275

Electric gas cutting machine

Day

223.00

23 / 275

Chain and pully

Day

205.00

24 / 275

Rotary core driller machinery

Day

971.00

25 / 275

Pile boring machinery 325 400 mm dia.

Running Meter

169.00

26 / 275

Blow lamp

Day

9.10

27 / 275

Machinery for Gunting

Square Meter 193.00

28 / 275

Jack Hammer

Day

393.00

29 / 275

Boulder Hoist

Hour

251.00

30 / 275

Water Pump upto 15 H.P.Tanker

Hour

239.00

31 / 276

Rent of floating platform

Day

192.00

32 / 276

Rent of Generator set 21 to 30 Hour

412.00

KW. 33 / 276

Rent of crane (12.00 tonne)

Hour

1135.00

34 / 276

Wagon drill

Day

1105.00

35 / 276

Equipment for cutting trees

Hour

115.00

36 / 276

Rammer

Hour

142.00

37 / 276

Dumpper 6 Cu.Mt Capacity with VTS(vehicle tracking system)

Hour

2000.00

38 / 276

Mechanical Sprayer

Metric Tonne 1490.00

39 / 276

Mastic Cooker 1 M.T. Capacity Day

2360.00

40 / 276

Vibratory Roller 8 tonne

Hour

725.00

41 / 276

Excavator 300 CK and HP-51

Hour

4000.00

42 / 276

Motor grader

Hour

1798.00

43 / 276

Diesel welding plant

Hour

361.00

44 / 276

Bouzer heating /Spraying Ashphalt

Metric Tonne 263.00

45 / 276

Asphalt Drum mix plant with SCADA

Hour

3836.00

46 / 276

Self Propelled Paver Finisher

Hour

1175.00

47 / 276

Bitumen Pressure Sprayer

Metric Tonne 192.00

48 / 276

Truck for roller transport ( 8 to Kilometer 10 M.T.)

58.50

49 / 276

Truck (7.50 M.T.)

Kilometer

58.50

50 / 276

Hot mix Mini Plant

Hour

1105.00

51 / 276

Pavement Breaker

Hour

339.00

52 / 276

Tractor with trolly

Hour

415.00

53 / 276

Loaders (H.P. 62)

Hour

1419.00

54 / 276

Hydraulic Portable Braker

Hour

468.00

55 / 276

Concrete Batching and mixing Hour plant (a) 30 cum capacity with SCADA

2139.00

56 / 276

Concrete Batching and mixing Hour plant (b) 15-20 cum capacity with SCADA

1847.00

57 / 276

Bitumen Pressure Distributor

Hour

602.00

58 / 276

Concrete pump of 45 to 30 cum capacity

Hour

720.00

59 / 276

Concrete Bucket

Hour

213.00

60 / 276

Cranes (c ) 3 tonnes

Hour

614.00

61 / 276

Dozer D- 8 -A 12

Hour

2536.00

62 / 276

Front End Loader 1 cum

Hour

1319.00

bucket capacity 63 / 276

Generator (a) 100KVA

Hour

1078.00

64 / 277

Generator (a) 33 KVA

Hour

614.00

65 / 277

GSB Plant 50 cum

Hour

1814.00

66 / 277

Batch mix type Hotmix Plant - Hour 80- 120 TPH Capacity with SCADA

8085.00

67 / 277


8085.00

68 / 277


8085.00

69 / 277


8085.00

70 / 277

Hydraulic Chip Spreader

Hour

1818.00

71 / 277

Hydraulic Excavator (Poclain)

Hour

2464.00

72 / 277

Kerb Casting Machine

Hour

592.00

73 / 277

Mastic Cooker

Hour

393.00

74 / 277

Mechanical Broom Hyadraulic

Hour

342.00

75 / 277

Motor grader 3.35 mtr Blade

Hour

1618.00

76 / 277

Paver finisher Hydrostatic with Hour sensor control 100 TPH

2409.00

77 / 277

Road Marking machine

Hour

88.00

78 / 277

Smooth wheeled Roller 8 tonne

Hour

905.00

79 / 277

Tandem Road Roller

Hour

921.00

80 / 277

Transit Mixer 4.0 / 4.5 cum (Hour Basis)

Hour

761.00

81 / 277

Transit Mixer 4.0 / 4.5 cum (Tonne / Km)

Tonne / Km

7.60

82 / 277

Tractor with Rotevator

Hour

472.00

83 / 277

Tractor with Ripper

Hour

472.00

84 / 277

Truck 5.5 cum per 10 tonnes (Hour Basis)

Hour

692.00

85 / 277

Truck 5.5 cum per 10 tonnes (Tonne / Km)

Tonne / Km

3.45

86 / 277

Vibratory Roller 8 tonne

Hour

725.00

87 / 277

Crane 5 tonne capacity

Hour

656.00

88 / 277

Generator 33 KVA

Hour

614.00

89 / 277

Generator 100 KVA

Hour

1078.00

90 / 277

Joint Cutting Machine with 2-3 Hour Blades ( for Rigid Pavement)

392.00

91 / 277

Plate Compactor

Hour

173.00

92 / 277

Wet Mix Plant 100 TPH

Hour

1940.00

93 / 277

Wet Mix Plant 75 TPH

Hour

1759.00

94 / 277

Road marking machine @ 60 sqm/hr

Hour

157.00

95New / 277

JCB 8 to 10 MT

Day

6565.00

95New / 277

Prestressing Jack with Pump

Hour

117.00

95New / 277

Grouting Pump with Agitator

Hour

209.00

96New / 277

Cart with Driver

Day

520.00

97New / 277

Tile Cutting Machine

Hour

24.00

98New / 277

Hydraulic Piling Rig

Hour

4042.00

99New / 277

Crane - Light

Hour

938.00

100New / 277 Loader 1.20 MT Capacity

Hour

1643.00

100New / 277 Engraver

Day

26.00

101New / 277 Bentonite

Kilogram

35.00

101New / 277 Drill Bits

Day

155.00

102New / 277 Pumping Assembly

Cubic Meter

62.00

103New / 277 Hydraulic Chip Spreador

Hour

1818.00

104New / 277 Bitument Pressure Distributor

Hour

602.00

105New / 277 Bitumen boiler 1500 litre Capacity

Hour

743.00

106New / 277 Trailor 30 MT Capacity

Hour

1820.00

107New / 277 Tipper 7.5 Tonne

Kilometer

60.00

108New / 277 Intellegent Compactor with Compaction Analyser

Hour

1123.00

DSR 2014-15 Lead Charges for truck load 7.5 MT Cost of Diesel 63 Per Litre Cost of mobile Oil 290 Per Litre Labour Charges of mazdoor 294 Per Labour Hire charges of Truck 2000 Per day Lead in Av.Speed No. of Trips Km done Qty of Cost of Diesel= Diesel Km Km/Hrs 3.50Km / Ltr L S N=8/((2*(L/S))+1) (2*NL)+6 1 2 3 4 5 6 0.50 15.00 7.5 13.50 3.86 243.18 1.00 16.00 7.11 20.22 5.78 364.14 1.50 16.50 6.77 26.31 7.52 473.76 2.00 17.00 6.48 31.92 9.12 574.56 2.50 17.25 6.20 37.00 10.57 665.91 3.00 17.50 5.96 41.76 11.93 751.59 3.50 17.75 5.74 46.18 13.19 830.97 4.00 18.00 5.54 50.32 14.38 905.94 4.50 18.25 5.36 54.24 15.50 976.50 5.00 18.50 5.19 57.90 16.54 1042.02 6.00 19.00 4.9 64.80 18.51 1166.13 7.00 19.50 4.66 71.24 20.35 1282.05 8.00 20.00 4.44 77.04 22.01 1386.63 9.00 20.50 4.26 82.68 23.62 1488.06 10.00 21.00 4.10 88.00 25.14 1583.82 15.00 23.50 3.51 111.30 31.80 2003.40 20.00 26.00 3.15 132.00 37.71 2375.73 25.00 28.50 2.9 151.00 43.14 2717.82 30.00 31.00 2.73 169.80 48.51 3056.13 35.00 31.00 2.46 178.20 50.91 3207.33 40.00 31.00 2.23 184.40 52.69 3319.47 45.00 31.00 2.05 190.50 54.43 3429.09 50.00 31.00 1.89 195.00 55.71 3509.73 60.00 31.00 1.64 202.80 57.94 3650.22 7 0.082 0.123 0.160 0.195 0.225 0.255 0.281 0.307 0.331 0.353 0.395 0.434 0.470 0.504 0.536 0.678 0.804 0.920 1.035 1.086 1.124 1.161 1.188 1.236

8 23.88 35.76 46.52 56.42 65.39 73.81 81.60 88.96 95.89 102.33 114.52 125.90 136.17 146.13 155.53 196.74 233.30 266.89 300.12 314.96 325.98 336.74 344.66 358.46

Qty of Cost of mobile mobile oil in Ltr oil@ 290/Ltr 9 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00

10 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00

Cost of 6 Hire Mazdoor Charges @294/lbr of Truck@

Average speed as per CPWD statement

11 4031.06 4163.90 4284.28 4394.98 4495.30 4589.40 4676.57 4758.90 4836.39 4908.35 5044.65 5171.95 5286.80 5398.19 5503.35 5964.14 6373.03 6748.71 7120.25 7286.29 7409.45 7529.83 7618.39 7772.68

12 403.11 416.39 428.43 439.50 449.53 458.94 467.66 475.89 483.64 490.84 504.47 517.20 528.68 539.82 550.34 596.41 637.30 674.87 712.03 728.63 740.95 752.98 761.84 777.27

13 4434.17 4580.29 4712.71 4834.48 4944.83 5048.34 5144.23 5234.79 5320.03 5399.19 5549.12 5689.15 5815.48 5938.01 6053.69 6560.55 7010.33 7423.58 7832.28 8014.92 8150.40 8282.81 8380.23 8549.95

Total cost add 10% Total of Overhead 11+12 Charges

14 591.22 644.2 696.12 746.06 797.55 847.04 896.21 944.91 992.54 1040.31 1132.47 1220.85 1309.79 1393.9 1476.51 1869.1 2225.5 2559.86 2868.97 3258.1 3654.89 4040.4 4433.98 5213.38

15 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 60.00

Cost per Lead in Trip=13/3 km

39.17 61.87 84.54 107.11 129.75 152.34 174.88 197.54 220.08 242.54 287.49 332.35 377.27 421.97 466.65 689.50 911.09 1132.13 1352.34 1575.01 1798.20 2020.69 2243.30 2688.75

Fuel Componant

70.00 80.00 90.00 100.00 125.00 150.00 175.00 200.00

31.00 31.00 31.00 40.00 40.00 40.00 40.00 40.00

1.45 1.3 1.18 1.33 1.10 0.94 0.82 0.73

209.00 214.00 218.40 272.00 281.00 288.00 293.00 298.00

59.71 61.14 62.40 77.71 80.29 82.29 83.71 85.14

3761.73 3851.82 3931.20 4895.73 5058.27 5184.27 5273.73 5363.82

1.274 1.304 1.331 1.658 1.713 1.756 1.786 1.816

369.41 378.25 386.05 480.77 496.73 509.10 517.89 526.73

1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00 1764.00

2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00 2000.00

7895.14 7994.07 8081.25 9140.50 9319.00 9457.37 9555.62 9654.55

789.51 799.41 808.13 914.05 931.90 945.74 955.56 965.46

8684.65 5989.41 8793.48 6764.22 8889.38 7533.37 10054.55 7559.81 10250.90 9319.00 10403.11 11067.14 10511.18 12818.51 10620.01 14547.96

70.00 80.00 90.00 100.00 125.00 150.00 175.00 200.00

3133.97 3579.29 4024.56 4446.73 5555.00 6662.45 7769.25 8876.17

KM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

LEAD

UNIT 644.20 746.06 847.04 944.91 1040.31 1132.47 1220.85 1309.79 1393.90 1476.51 1555.03 1633.55 1712.06 1790.58 1869.10 1940.38 2011.66 2082.94 2154.22 2225.50 2292.37 2359.24 2426.12 2492.99 2559.86 2621.68 2683.50 2745.33 2807.15 2868.97 2946.80 3024.62 3102.45

LEAD CHARGES

CUM 139.44 161.48 183.34 204.53 225.18 245.12 264.25 283.50 301.71 319.59 336.59 353.58 370.58 387.57 404.57 420.00 435.42 450.85 466.28 481.71 496.18 510.66 525.13 539.61 554.08 567.46 580.85 594.23 607.61 620.99 637.83 654.68 671.53

60/40 METAL

CUM 128.84 149.21 169.41 188.98 208.06 226.49 244.17 261.96 278.78 295.30 311.01 326.71 342.41 358.12 373.82 388.08 402.33 416.59 430.84 445.10 458.47 471.85 485.22 498.60 511.97 524.34 536.70 549.07 561.43 573.79 589.36 604.92 620.49

CUM 107.37 124.34 141.17 157.49 173.39 188.75 203.48 218.30 232.32 246.09 259.17 272.26 285.34 298.43 311.52 323.40 335.28 347.16 359.04 370.92 382.06 393.21 404.35 415.50 426.64 436.95 447.25 457.55 467.86 478.16 491.13 504.10 517.07

CR METAL / H.M /S.M SAND

MT. 92.03 106.58 121.01 134.99 148.62 161.78 174.41 187.11 199.13 210.93 222.15 233.36 244.58 255.80 267.01 277.20 287.38 297.56 307.75 317.93 327.48 337.03 346.59 356.14 365.69 374.53 383.36 392.19 401.02 409.85 420.97 432.09 443.21

CEM. /STEEL/ Emulsion

CUM 151.58 175.54 199.30 222.33 244.78 266.46 287.26 308.19 327.98 347.41 365.89 384.36 402.84 421.31 439.79 456.56 473.33 490.10 506.88 523.65 539.38 555.12 570.85 586.59 602.32 616.87 631.41 645.96 660.51 675.05 693.36 711.68 729.99

RUBBLE

CUM 322.10 373.03 423.52 472.46 520.16 566.24 610.43 654.90 696.95 738.26 777.51 816.77 856.03 895.29 934.55 970.19 1005.83 1041.47 1077.11 1112.75 1146.19 1179.62 1213.06 1246.49 1279.93 1310.84 1341.75 1372.66 1403.57 1434.49 1473.40 1512.31 1551.22

BRICKS

RGM. 42.95 49.74 56.47 62.99 69.35 75.50 81.39 87.32 92.93 98.43 103.67 108.90 114.14 119.37 124.61 129.36 134.11 138.86 143.61 148.37 152.82 157.28 161.74 166.20 170.66 174.78 178.90 183.02 187.14 191.26 196.45 201.64 206.83

800/900/ 1000

LEAD STATEMENT FOR 2014-15

CUM 134.21 155.43 176.47 196.86 216.73 235.93 254.34 272.87 290.40 307.61 323.96 340.32 356.68 373.04 389.40 404.25 419.10 433.95 448.80 463.65 477.58 491.51 505.44 519.37 533.30 546.18 559.06 571.94 584.82 597.70 613.92 630.13 646.34

EARTH

KM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

LEAD

MT 5.20 10.40 15.60 20.80 26.00 31.20 36.40 41.60 46.80 52.00 1560.00 1586.00 1612.00 1638.00 1664.00 1690.00 1716.00 1742.00 1768.00 1794.00 1820.00 1846.00 1872.00 1898.00 1924.00 1950.00 1976.00 2002.00 2028.00 2033.20 2038.40 2043.60 2048.80

ASPHALT

KM 1 2 3 4 5 6 7 8 9 10 300 305 310 315 320 325 330 335 340 345 350 355 360 365 370 375 380 385 390 391 392 393 394

LEAD ASPLT

34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

688.37 705.22 722.39 739.57 756.75 773.92 791.10 807.79 824.48 841.17 857.86 874.55 891.58 908.62 925.66 942.70 959.74

636.05 651.62 667.49 683.36 699.23 715.11 730.98 746.40 761.82 777.24 792.66 808.08 823.82 839.57 855.31 871.05 886.80

530.05 543.02 556.24 569.47 582.70 595.92 609.15 622.00 634.85 647.70 660.55 673.40 686.52 699.64 712.76 725.88 739.00

454.32 465.44 476.78 488.12 499.45 510.79 522.13 533.14 544.16 555.17 566.19 577.20 588.45 599.69 610.94 622.18 633.43

748.30 766.61 785.28 803.96 822.63 841.30 859.97 878.12 896.26 914.40 932.54 950.68 969.20 987.73 1006.25 1024.77 1043.29

1590.14 1629.05 1668.73 1708.41 1748.09 1787.77 1827.45 1866.00 1904.55 1943.10 1981.65 2020.20 2059.56 2098.92 2138.27 2177.63 2216.99

212.02 217.21 222.50 227.79 233.08 238.37 243.66 248.80 253.94 259.08 264.22 269.36 274.61 279.86 285.10 290.35 295.60

662.56 678.77 695.30 711.84 728.37 744.90 761.44 777.50 793.56 809.62 825.69 841.75 858.15 874.55 890.95 907.35 923.75

Lead charges for bulk asphalt =5.20/km /MT vide note 5.6(a) of DSR 2014-15 Heating and Unloading charges of bulk asphalt = Rs 120.00 per MT shall be considered seperately

3180.27 3258.10 3337.46 3416.82 3496.17 3575.53 3654.89 3731.99 3809.09 3886.20 3963.30 4040.40 4119.12 4197.83 4276.55 4355.26 4433.98

34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

2054.00 2059.20 2064.40 2069.60 2080.00 2085.20 2090.40 2095.60 2100.80 2106.00 2111.20 2116.40 2121.60 2126.80 2132.00 2137.20 2142.40

395 396 397 398 400 401 402 403 404 405 406 407 408 409 410 411 412

DSR 2014-15 Lead Charges for truck load 7.5 MT Cost of Diesel Cost of mobile Oil Labour Charges of mazdoor Hire charges of Truck Lead in km Cost Per Fuel Trip Componant Murrum Lead Charges Unit Load Fact 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 8.00 9.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 60.00 70.00 80.00 90.00 100.00 125.00 150.00 175.00 200.00

591.22 644.20 696.12 746.06 797.55 847.04 896.21 944.91 992.54 1040.31 1132.47 1220.85 1309.79 1393.90 1476.51 1869.10 2225.50 2559.86 2868.97 3258.10 3654.89 4040.40 4433.98 5213.38 5989.41 6764.22 7533.37 7559.81 9319.00 11067.14 12818.51 14547.96

39.17 61.87 84.54 107.11 129.75 152.34 174.88 197.54 220.08 242.54 287.49 332.35 377.27 421.97 466.65 689.50 911.09 1132.13 1352.34 1575.01 1798.20 2020.69 2243.30 2688.75 3133.97 3579.29 4024.56 4446.73 5555.00 6662.45 7769.25 8876.17

63 290 294 2000

Cum 6.00 Fuel 98.54 6.53 107.37 10.31 116.02 14.09 124.34 17.85 132.93 21.63 141.17 25.39 149.37 29.15 157.49 32.92 165.42 36.68 173.39 40.42 188.75 47.92 203.48 55.39 218.30 62.88 232.32 70.33 246.09 77.78 311.52 114.92 370.92 151.85 426.64 188.69 478.16 225.39 543.02 262.50 609.15 299.70 673.40 336.78 739.00 373.88 868.90 448.13 998.24 522.33 1127.37 596.55 1255.56 670.76 1259.97 741.12 1553.17 925.83 1844.52 1110.41 2136.42 1294.88 2424.66 1479.36

Per Litre Per Litre Per Labour Per day Earth

Cum 4.8 Fuel 123.17 8.16 134.21 12.89 145.03 17.61 155.43 22.31 166.16 27.03 176.47 31.74 186.71 36.43 196.86 41.15 206.78 45.85 216.73 50.53 235.93 59.89 254.34 69.24 272.87 78.60 290.40 87.91 307.61 97.22 389.40 143.65 463.65 189.81 533.30 235.86 597.70 281.74 678.77 328.13 761.44 374.63 841.75 420.98 923.75 467.35 1086.12 560.16 1247.79 652.91 1409.21 745.69 1569.45 838.45 1574.96 926.40 1941.46 1157.29 2305.65 1388.01 2670.52 1618.59 3030.83 1849.20

Manure of Sludge

Cum 5.45 Fuel 108.48 7.19 118.20 11.35 127.73 15.51 136.89 19.65 146.34 23.81 155.42 27.95 164.44 32.09 173.38 36.25 182.12 40.38 190.88 44.50 207.79 52.75 224.01 60.98 240.33 69.22 255.76 77.43 270.92 85.62 342.95 126.51 408.35 167.17 469.70 207.73 526.42 248.14 597.82 288.99 670.62 329.94 741.36 370.77 813.57 411.61 956.58 493.35 1098.97 575.04 1241.14 656.75 1382.27 738.45 1387.12 815.91 1709.91 1019.27 2030.67 1222.47 2352.02 1425.55 2669.35 1628.66

Excavated Rock

Cum 3.00 Fuel 197.07 13.06 214.73 20.62 232.04 28.18 248.69 35.70 265.85 43.25 282.35 50.78 298.74 58.29 314.97 65.85 330.85 73.36 346.77 80.85 377.49 95.83 406.95 110.78 436.60 125.76 464.63 140.66 492.17 155.55 623.03 229.83 741.83 303.70 853.29 377.38 956.32 450.78 1086.03 525.00 1218.30 599.40 1346.80 673.56 1477.99 747.77 1737.79 896.25 1996.47 1044.66 2254.74 1193.10 2511.12 1341.52 2519.94 1482.24 3106.33 1851.67 3689.05 2220.82 4272.84 2589.75 4849.32 2958.72

Sand

Cum 5.00 Fuel 118.24 7.83 128.84 12.37 139.22 16.91 149.21 21.42 159.51 25.95 169.41 30.47 179.24 34.98 188.98 39.51 198.51 44.02 208.06 48.51 226.49 57.50 244.17 66.47 261.96 75.45 278.78 84.39 295.30 93.33 373.82 137.90 445.10 182.22 511.97 226.43 573.79 270.47 651.62 315.00 730.98 359.64 808.08 404.14 886.80 448.66 1042.68 537.75 1197.88 626.79 1352.84 715.86 1506.67 804.91 1511.96 889.35 1863.80 1111.00 2213.43 1332.49 2563.70 1553.85 2909.59 1775.23

Stone aggregate 40mm Normal size and above Cum 4.62 Fuel 127.97 8.48 139.44 13.39 150.68 18.30 161.48 23.18 172.63 28.08 183.34 32.97 193.98 37.85 204.53 42.76 214.84 47.64 225.18 52.50 245.12 62.23 264.25 71.94 283.50 81.66 301.71 91.34 319.59 101.01 404.57 149.24 481.71 197.21 554.08 245.05 620.99 292.71 705.22 340.91 791.10 389.22 874.55 437.38 959.74 485.56 1128.44 581.98 1296.41 678.35 1464.12 774.74 1630.60 871.12 1636.32 962.50 2017.10 1202.38 2395.48 1442.09 2774.57 1681.66 3148.91 1921.25

Lead Charges Soling Stone

Cum 4.25 Fuel 139.11 9.22 151.58 14.56 163.79 19.89 175.54 25.20 187.66 30.53 199.30 35.84 210.87 41.15 222.33 46.48 233.54 51.78 244.78 57.07 266.46 67.64 287.26 78.20 308.19 88.77 327.98 99.29 347.41 109.80 439.79 162.24 523.65 214.37 602.32 266.38 675.05 318.20 766.61 370.59 859.97 423.11 950.68 475.46 1043.29 527.84 1226.68 632.65 1409.27 737.40 1591.58 842.19 1772.56 946.96 1778.78 1046.29 2192.71 1307.06 2604.03 1567.64 3016.12 1828.06 3423.05 2088.51

ConcreteBlock

Steel ,Cement, Stone Block,Emulsion

Bricks

MT. Cum Cum 6.00 Fuel 7.00 Fuel 2 Fuel 98.54 6.53 84.46 5.60 295.61 19.59 107.37 10.31 92.03 8.84 322.10 30.94 116.02 14.09 99.45 12.08 348.06 42.27 124.34 17.85 106.58 15.30 373.03 53.56 132.93 21.63 113.94 18.54 398.78 64.88 141.17 25.39 121.01 21.76 423.52 76.17 149.37 29.15 128.03 24.98 448.11 87.44 157.49 32.92 134.99 28.22 472.46 98.77 165.42 36.68 141.79 31.44 496.27 110.04 173.39 40.42 148.62 34.65 520.16 121.27 188.75 47.92 161.78 41.07 566.24 143.75 203.48 55.39 174.41 47.48 610.43 166.18 218.30 62.88 187.11 53.90 654.90 188.64 232.32 70.33 199.13 60.28 696.95 210.99 246.09 77.78 210.93 66.66 738.26 233.33 311.52 114.92 267.01 98.50 934.55 344.75 370.92 151.85 317.93 130.16 1112.75 455.55 426.64 188.69 365.69 161.73 1279.93 566.07 478.16 225.39 409.85 193.19 1434.49 676.17 543.02 262.50 465.44 225.00 1629.05 787.51 609.15 299.70 522.13 256.89 1827.45 899.10 673.40 336.78 577.20 288.67 2020.20 1010.35 739.00 373.88 633.43 320.47 2216.99 1121.65 868.90 448.13 744.77 384.11 2606.69 1344.38 998.24 522.33 855.63 447.71 2994.71 1566.99 1127.37 596.55 966.32 511.33 3382.11 1789.65 1255.56 670.76 1076.20 574.94 3766.69 2012.28 1259.97 741.12 1079.97 635.25 3779.91 2223.37 1553.17 925.83 1331.29 793.57 4659.50 2777.50 1844.52 1110.41 1581.02 951.78 5533.57 3331.23 2136.42 1294.88 1831.22 1109.89 6409.26 3884.63 2424.66 1479.36 2078.28 1268.02 7273.98 4438.09

Tiles Half Round Tiles /Roofing Tiles Cum 3.2 Fuel 184.76 12.24 201.31 19.33 217.54 26.42 233.14 33.47 249.23 40.55 264.70 47.61 280.07 54.65 295.28 61.73 310.17 68.78 325.10 75.79 353.90 89.84 381.52 103.86 409.31 117.90 435.59 131.87 461.41 145.83 584.09 215.47 695.47 284.72 799.96 353.79 896.55 422.61 1018.16 492.19 1142.15 561.94 1262.63 631.47 1385.62 701.03 1629.18 840.23 1871.69 979.37 2113.82 1118.53 2354.18 1257.68 2362.44 1389.60 2912.19 1735.94 3458.48 2082.02 4005.78 2427.89 4546.24 2773.80

Glass Block ( Hollow) 100 mm 200mm Cum 10.00 Fuel 59.12 3.92 64.42 6.19 69.61 8.45 74.61 10.71 79.76 12.98 84.70 15.23 89.62 17.49 94.49 19.75 99.25 22.01 104.03 24.25 113.25 28.75 122.09 33.24 130.98 37.73 139.39 42.20 147.65 46.67 186.91 68.95 222.55 91.11 255.99 113.21 286.90 135.23 325.81 157.50 365.49 179.82 404.04 202.07 443.40 224.33 521.34 268.88 598.94 313.40 676.42 357.93 753.34 402.46 755.98 444.67 931.90 555.50 1106.71 666.25 1281.85 776.93 1454.80 887.62

Flooring Tiles Ceramic/ Marbonate Sqm 450 Fuel 1.31 0.09 1.43 0.14 1.55 0.19 1.66 0.24 1.77 0.29 1.88 0.34 1.99 0.39 2.10 0.44 2.21 0.49 2.31 0.54 2.52 0.64 2.71 0.74 2.91 0.84 3.10 0.94 3.28 1.04 4.15 1.53 4.95 2.02 5.69 2.52 6.38 3.01 7.24 3.50 8.12 4.00 8.98 4.49 9.85 4.99 11.59 5.98 13.31 6.96 15.03 7.95 16.74 8.94 16.80 9.88 20.71 12.34 24.59 14.81 28.49 17.27 32.33 19.72

STATEMENT -C-2 COST OF CARRIAGE BY COOLIES $ COST OF CARRIAGE BY CART Hire Charges for Mazdoor 294 Hire Charges for Cart 530 COST OF CARRIAGE BY COOLIES COST OF CARRIAGE BY CART Lead or Distance in Metre

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100

Total amount per Cum Rs/2 22.08 27.78 34.25 40.33 45.55 52.66 59.66 62.95 73.18 75.55 79.58 85.99 93.48 97.14 103.82 109.09 116.31 121.32 127.08 133.59

Lead or Distance in Metre

Say 22.10 27.80 34.25 40.35 45.55 52.65 59.65 62.95 73.20 75.55 79.60 86.00 93.50 97.15 103.80 109.10 116.30 121.30 127.10 133.60

1 100 125 150 175 200 225 280.25 305.25 330.25 355.25 380.25 405.25 430.25 455.25 480.25 505.25 530.25

Total amount per Cum Rs/2 54.35 57.29 63.88 68.00 74.71 79.39 80.68 89.42 94.33 98.90 104.31 108.99 114.46 119.19 124.49 129.23 134.70

Total amount on Weight basis i.e.per Tonne Col.-02x0.557 Say 54.35 57.30 63.90 68.00 74.70 79.40 80.70 89.40 94.35 98.90 104.30 109.00 114.45 119.20 124.50 129.25 134.70

3 30.27 31.91 35.58 37.87 41.61 44.22 44.94 49.81 52.54 55.08 58.10 60.71 63.75 66.39 69.34 71.98 75.03

Say 30.25 31.90 35.60 37.85 41.60 44.20 44.95 49.80 52.55 55.10 58.10 60.70 63.75 66.40 69.35 72.00 75.05

Concrete Unit Grade

M-20 M-25 M-30 M-35 M-40

Cum Cum Cum Cum Cum

Concrete Unit Grade

M-10 M-15

Cum Cum

Concrete Unit Grade

1:3:6 Cum 1:4:8 Cum 1:5:10 Cum

C O N S U M P T I O N S T A T E M E N T FOR REINFORCEMENT CEMENT CONCRETE Material required Per Cum of Concrete Finness modulus Fine Coarse Cement in Coarse aggregate Fine Bags 12 mm 20 mm aggregate aggregate aggregate Cum Cum Cum 6.90 0.28 0.57 0.425 2.87 6.50 8.50 0.28 0.57 0.425 2.87 6.50 9.20 0.28 0.57 0.425 2.87 6.50 10.20 0.28 0.57 0.425 2.87 6.50 10.50 0.28 0.57 0.425 2.87 6.50 PLAIN CEMENT CONCRETE Material required Per Cum of Concrete Finness modulus Cement in Coarse aggregate Fine Fine Coarse Bags 10-20 mm 25-40 aggregate aggregate aggregate Cum Cum Cum 4.05 0.33 0.56 0.445 2.87 6.50 5.9 0.33 0.56 0.445 2.87 6.50

Material required Per Cum of Concrete Finness modulus Cement in Coarse aggregate Fine Fine Coarse Bags 40 mm aggregate aggregate aggregate Cum Cum 4.05 0.86 0.43 1.26 6.90 3.20 0.90 0.45 1.26 6.90 2.52 0.90 0.45 1.26 6.90

MATERIAL REQUIREMENTS FOR U.C.R. MASONARY Sr.No .

Item of Work

Unit

Qty. of Material Required Cement in Sand in bags Cum 1.78 0.35

Rubble in Cum 1.16

1 U.C.R. masonary in C.M.1:6 in plinth

Cum

2 U.C.R. masonary in C.M.1:5 in Basement

Cum

2.06

0.35

1.16

3 U.C.R. masonary in C.M.1:3 in Basement

Cum

3.54

0.35

1.16

4 U.C.R. masonary in C.M.1:6 in Superstructure

Cum

1.78

0.35

1.16

5 C.R. masonary in C.M.1:6 in Superstructure

Cum

1.5

0.30

1.16

MATERIAL REQUIREMENTS FOR BRICK MASONARY Sr.No .

Item of Work

Unit

Qty. of Material Required Cement in Sand in Brick In bags Cum No. 1.44 0.302 473

1 B.B.Masonary in C.M. 1:6 For Foundation

Cum

2 Half Brick thick wall in C.M.1:4

Sqm

0.22

0.03

52

3 Half brick thick on Edge in C.M.1:3

Sqm

0.20

0.02

52

4 Brick pillar/Arch in C.M.1:4

Cum

1.44

0.225

473

5 Fly ash Bricks 230x150x80mm in C.M. 1:6

Cum

1.44

0.30

300

6 Fly ash half Bricks 230x150x80mm in C.M. 1:6

Sqm

0.22

0.03

52

MATERIAL REQUIREMENTS FOR CEMENT PLASTERING & POINTING Sr.No .

Item of Work

Unit

Qty. of Material Required Cement in Sand in bags Cum

1 6mm Cement plaster In C.M.1:4

Sqm

0.054

0.0076


Sqm

0.07

0.0076


Sqm

0.09

0.015


Sqm

0.11

0.015


Sqm

0.14

0.015


Sqm

0.14

0.025


Sqm

0.17

0.025


Sqm

0.19

0.025


Sqm

0.22

0.031

10 Sand Faced Cement plaster In C.M.1:4

Sqm

0.25

0.035

11 Rough Cast Cement plaster In C.M.1:4

Sqm

0.25

0.035

12 Patti Plaster 12-15 mm thk 75 mm wide C.M.1:3

Rgm

0.012

0.0015


Rgm

0.016

0.0015


Rgm

0.024

0.003

15 Flush groove pointing Stone masonary in C.M.1:3

Sqm

0.045

0.004

16 Flush groove pointing Brick masonary in C.M.1:3

Sqm

0.03

0.003

17 Tuck pointing Stone masonary in C.M.1:3

Sqm

0.05

0.005

18 Tuck pointing Brick masonary in C.M.1:3

Sqm

0.024

0.0025

19 Vee pointing Stone masonary in C.M.1:3

Sqm

0.03

0.003

20 Fine Cement Finish 1.5 mm thick

Sqm

0.04

401

401

401

401

401

401

1

2

3

4

5

6

Granular Sub Base Coarse graded GrIII ( Mix in Place method)

Granular Sub Base Coarse graded GrII ( Mix in Place method)

Granular Sub Base Coarse graded Gr-I ( Mix in Place method)

Granular Sub Base Close graded Gr-III ( Mix in Place method)

Granular Sub Base Close graded Gr-II ( Mix in Place method)

Granular Sub Base Close graded Gr-I ( Mix in Place method)

Sr.No MORT&H Particulars . Section

One Cum

One Cum

One Cum

One Cum

One Cum

One Cum

Unit

Metal 9.50 mm To 4.75 mm Metal below 2.36 mm


Metal 53 mm To 26.5mm Metal 26.5 mm To 4.75 mm Metal below 2.36 mm

Total

Total

Total

Total

0.85 0.43 1.28

0.96 0.32 1.28

0.448 0.576 0.256 1.28

0.448 0.16 0.672 1.28

0.32 0.512 1.28


Metal 9.50 mm To 4.75 mm Metal 4.75 mm To 2.36 mm Metal below 2.36 mm

0.448

Metal 26.5 mm To 9.50 mm

Total

0.253 1.277

Metal below 2.36 mm Total

0.384

Qty. of Material in Cum 0.64

Metal 9.50 mm To 2.36 mm

Metal 53 mm To 9.50 mm

Material Required

66.41 33.59 100.00

75.00 25.00 100.00

35.00 45.00 20.00 100.00

35.00 12.50 52.50 100.00

25.00 40.00 100.00

35.00

19.81 100.00

30.07

50.12

% of material

404

404

404

404

404

406

504

7

8

9

10

11

14

15

Bituminious Macadam ( 3.30% bitumen content)

Wet Mix Macadam (Compacted thickness 75 mm)

Water bound macadam Gr-II With Type B Screening (Compacted thickness 75 mm)

Water bound macadam Gr-I With Type B Screening (Compacted thickness 75 mm)

Water bound macadam Gr-I With Type A Screening (Compacted thickness 75 mm)

Water bound macadam Gr-II With Murum Blindage (Compacted thickness 75 mm)

Water bound macadam Gr-I With Murum Blindage (Compacted thickness 75 mm)

One Cum

One Cum

One Cum

One Cum

One Cum

One Cum

One Cum

1.32 0.26 0.11 0.396 0.528 0.396 1.32

Metal 53 mm To 22.4 mm Metal 10 mm nominal size Murum Metal 45 mm To 22.4 mm Metal 22.4 mm To 2.36 mm Metal 2.36 mm To 75 micron

0.212 0.353 0.637 0.212

1.32 0.28 0.11

Metal 63 mm To 45 mm Metal 11.2 mm nominal size Murum

Metal 37.5 mm To 25 mm Metal 25 mm To 10 mm Metal 10 mm To 5 mm Metal below 5.6 mm

1.32 0.18 0.11

Metal 63 mm To 45 mm Metal 13.2 mm To 12.5 mm Murum

Total

1.32 0.306

1.32 0.306

Metal 53 mm To 22.4 mm Murum Blindage

Metal 63 mm To 45 mm Murum Blindage

14.99 24.96 45.05 14.99

30.00 40.00 30.00 100.00

505

507

508

508

509

509

510

16

17

18

19

20

21

22

open Graded Premix Surfacing with A Type Seal Coat

Surface Dressing Single Coat surface Dressing

Surface Dressing Single Coat surface Dressing

Mix seal Surfacing Type -B ( Close graded Mix seal surfacing)

Mix seal Surfacing Type -A ( Close graded Mix seal surfacing)

Bituminious Concrete ( 5.00% bitumen content with Dust filler)

Dense Bituminious Macadam ( 4.50% bitumen content With Dust Filler)

One Sqm

One Sqm

One Sqm

One Sqm

One Sqm

One Cum

One Cum

0.448 0.373 0.642 1.463 117.80 Kg 0.045 cum 15.00 lit

Metal 13.2 mm To 10 mm Metal 10 mm To 5 mm Metal below 5.6 mm

0.015 1.20 Kg

Metal 19 mm Nominal size Bitumen VG-30

Metal 13.2 mm To 5.6 mm(Premix) Metal 6 mm(Seal Coat)

0.027 0.009

0.01 1.00 Kg

0.27 1.90 kg

Metal below 11.2 mm Bitumen VG-30

Metal 13.2 mm Nominal size Bitumen VG-30

0.27 2.20 kg

Metal below 11.2 mm Bitumen VG-30

Bitumen VG-30 Dust LDO

Bitumen VG-30 Dust LDO

0.324 0.191 0.280 0.648 1.443 72.44 Kg 0.044 cum 13.00 lit

Metal 37.5 mm To 25 mm Metal 25 mm To 10 mm Metal 10 mm To 5 mm Metal below 5.6 mm

Bitumen VG-30 LDO

1.414 72.44 Kg 13.00 lit

30.62 25.50 43.88 100.00

22.45 13.24 19.40 44.91 100.00

100.00

511

511

23

23

Liquid Seal Coat(Premix Type B)

Liquid Seal Coat

One Sqm

One Sqm Metal 6 mm Nominal size Bitumen VG-30

Metal 6 mm Nominal size Bitumen VG-30

Bitumen VG-30(Premix) Bitumen VG-30(Seal Coat) LDO

0.006 0.68 Kg

0.009 0.98 Kg

1.46 Kg 0.98 Kg 0.24 lit

dsr 2014=2015

Recommend Documents