131511338 ESwitching Basic Switching Wireless PT Practice SBA
Answers for Practice PAcket Tracer Activity CCNA 3
Full description
Full description
Full description
BASIC AGRONOMI PRACTICE
a practice set of basic accountingFull description
cftrrett456ecdgyf55655yrrtt
dfsgfdffFull description
Are Men More fit than women?
Physical Education SBA for students writing CSEC
Practice grammarDescripción completa
Descripción completa
Descripción completa
To guide and show students who are in CXC how to submit a pob SBA its also for helping them in passing their SBA with FULL MARKS.
history school based assessment
Full description
complete mathematics sbaFull description
This is a sample of an internal assessment for csec physical education.
ESwitching Basic Switching/Wireless PT Practice SBA A few things to keep in mind while completing this activity: 1. 2. 3.
Do not use the browser Back button or close or reload any Exam windows during the exam. Do not close Packet Tracer when you are done. It will close automatically. Click the Submit Assessment button to submit your work.
Introduction In this practice Packet Tracer Skills Exam, you will: •
configure VLANs using VTP
•
configure inter-VLAN routing
•
modify STP
•
configure port security
•
add a wireless LAN
Addressing Table Device
Interface
Address
Subnet Mask
Default Gateway
Fa0/0.10
172.16.10.1
255.255.255.0
n/a
Fa0/0.20
172.16.20.1
255.255.255.0
n/a
Fa0/0.43
172.16.43.1
255.255.255.0
n/a
Fa0/0.67
172.16.67.1
255.255.255.0
n/a
Internet
172.16.67.10
255.255.255.0
172.16.67.1
Wireless
172.16.100.1
255.255.255.0
n/a
SW_DS1
VLAN 43
172.16.43.11
255.255.255.0
172.16.43.1
SW_AC2
VLAN 43
172.16.43.12
255.255.255.0
172.16.43.1
SW_AC3
VLAN 43
172.16.43.13
255.255.255.0
172.16.43.1
PC1
NIC
172.16.10.10
255.255.255.0
172.16.10.1
PC2
NIC
172.16.20.10
255.255.255.0
172.16.20.1
PC3
NIC
172.16.10.11
255.255.255.0
172.16.10.1
PC4
NIC
DHCP assigned
255.255.255.0
172.16.100.1
Router1
WRS
Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.
ESwitching Basic Switching/Wireless PT Practice SBA
Step 1: Connect the Devices. Use the appropriate cable type to make the following connections: •
SW_AC2 FastEthernet 0/1 to PC1
•
SW_AC2 FastEthernet 0/11 to PC2
•
SW_AC2 FastEthernet 0/19 to SW_AC3 FastEthernet 0/19
•
SW_AC2 FastEthernet 0/20 to SW_AC3 FastEthernet 0/20
•
SW_AC3 FastEthernet 0/18 to WRS
Step 2: Configure the Device Basics. a. Configure the following on SW_AC2. •
The switch name is SW_AC2.
•
The privileged EXEC mode uses the following encrypted password: class
•
Enable Telnet and console line login using the following password: cisco
•
Configure the banner message-of-the-day as Authorized access only!
b. To configure the switches for remote management access, create and enable interface VLAN 43 on all three switches.
Step 3: Configure Trunking. Note: Packet Tracer now supports the use of the range argument for the interface command. For interfaces FastEthernet 0/19 through FastEthernet 0/24 on all three switches: •
Configure static trunking.
•
Assign VLAN 43 as the native VLAN.
Step 4: Configure VTP and VLANs. a. Step 1: Configure SW_DS1 as VTP server and the following VTP parameters: •
SW_DS1 is the VTP server.
•
VTP domain name: CCNA
•
VTP password: cisco
b. Create and name the following VLANs on SW_DS1.
c.
•
VLAN 10: Student
•
VLAN 20: Faculty
•
VLAN 43: Management
•
VLAN 67: Wireless
Step 2: Configure SW_AC2 and SW_AC3 as VTP clients to participate in the CCNA VTP domain.
Using a priority of 4096, set SW_DS1 as the root bridge for all VLANs.
•
Using a priority of 8192, set SW_AC2 as the backup root bridge for all VLANs.
b. Verify the spanning tree election.
Step 7: Configure Inter-VLAN Routing. •
Use the information in the Addressing Table to configure Router1 for inter-VLAN routing.
•
Verify inter-VLAN routing.
Step 8: Configure Port Security. Note: Best practice requires port security on all access ports. However, for this practice exercise you will only configure one port with security. a. Configure SW_AC3 with port security on FastEthernet 0/2. •
No more than 2 MAC addresses are allowed on the FastEthernet 0/2 port for SW_AC3.
•
Once learned, MAC addresses should be automatically added to the running configuration.
•
If this policy is violated, the port should be automatically disabled.
ESwitching Basic Switching/Wireless PT Practice SBA
LAN Switching and Wireless
Step 9: Configure the Wireless LAN. Refer to the Addressing Table to configure the wireless LAN. a. Configure WRS. •
Use static addressing on the Internet interface.
•
Set the router IP and subnet mask.
•
Configure the router to allow wireless hosts to use DHCP. •
The first host address is the 10th host address in the Wireless LAN subnet.
•
The maximum number of hosts is 25.
b. Configure wireless security.
c.
•
Set the SSID to WRS_LAN.
•
Enable WEP security and use 12345ABCDE as key1.
Enable remote management with the password cisco123.
d. Configure PC4 to access the wireless network that is provided by WRS. PC4 uses DHCP to obtain addressing information. Note: It will not be possible for devices to ping PC4 since PC4 is behind the WRS NAT firewall.
Step 10: Verify Connectivity. Although these are not scored, the following connectivity tests should be successful. •
