manual calderos cleaver brooks package . resumen de diferentes calderos pirotubularesDescripción completa
Descripción completa
Descrição completa
Manual for applying on Universiy of TIlburg, research master in philosophyFull description
guitarra
manual
Descripción completa
Descrição completa
Passo a passo para realizaçãoDescrição completa
Full description
Descrição completa
Descripción completa
Descripción completa
3.1 Maintenance schedule
Jenbacher Documentation
Intervals independent of the number of operating hours Inspection task Number/ Interval section daily Daily inspection round I 9002 0 daily Operating data log --Intake air filter-Engine
IW 8041 A0
daily
Overvoltage suppressor
IW 8048A0
daily
Check ignition voltage/ spark plug
IW 0309 M0
weekly < 250 oh
Lubricating oil
IW 0101 M0 TA 1000-0099A TA 1000-0099B TA 1000-0099C
first time after 150 oh
Battery
TA 1000-0050
Air filter in switch cabinet
---
Switch cabinet cooler
---
Cooling water
TA 1000-0200 TA 1000-0201 TA 1000-0204
Carry out daily visual inspection of the unit. Log the operating data daily. If the underpressure increases to more than 1000 Pa, the filter elements in the prefilter and pocket filter should be replaced. Visual inspection of the overvoltage deflectors. The result of the ignition voltage check to be carried out weekly, serves as the indicator for the actual service life of the spark plug. The results from the engine lubricating oil analyses are decisive for the actual oil change periods.
Check the acid level. once in a month Check if the pole binders are properly secured. Check air filter for pollution. once in a month If necessary, clean or replace. Check switch cabinet cooler for clogging once in a year and, if necessary, clean using compressed air. once in a year
Concentration inspection
---
30000 oh after having completed the Cooling water exchange overhaul activities every two years Replace
---
every five years Replace
W 8080 A0 Battery in DIANE module Storage battery at battery charger
Note
Proper maintenance according to the maintenance schedule is a condition for honouring any claims under warranty. After the „Overhaul“ 60000 operating hours, the maintenance work to be carried out is repeated at the same interval periods.
Keyword:
Chiniot 320
Unit no.:
J E800
Module no.: 557786 1
Module type :
JGS 320 GS-N.L
Version:
C105
Engine no.: 557787 1
Issued:
Doku./Provin
Checked:
VMP_Klammer Gerhard/TEAM_Egger Christoph/CSA_Sonnerer Herbert
Index:
d
EN
3_1_EN.doc
Date: 2008-04 -- No.: 1 / 4
3.1 Maintenance schedule
Jenbacher Documentation
Interval reference number = Operating hours/1000
ZK = on the occasion of cylinderhead disassembly
Maintenance after first start-up Valve clearance Ignition system Crankcase suction filter Regulating rods/Throttle valve/ Actuator
W 1000 0 W 0400 M0 W 0303 M0 W 0506 M0
W 0200 M0
Gas train
W 8045 A0
Inspection Turbocharger Engine cooling water pump Starter
I 0103 0 W 8023 M0 W 0202 M3 W 8032 M0
Gas mixer
W 0704 M0
Mixture bypass valve Torsion vibration damper GE Jenbacher-switch cabinets Piston/Piston cooling Con rod/Con rod bearing Cylinder liner/Scraper ring Crankshaft main bearing
W 0802 M0 W 0601 M0 W 8031 A0 W 8047 M0 W 8048 M0 W 8049 M0 W 8050 M0
Camshaft/Steering parts
W 8052 M0
Engine oil pump Turbocharger after-lubrication pump 60 Plate-type heat exchanger 60 Overhaul ZK Exhaust gas manifold/Isolation - Cylinder head replacement - Generator - Elastomer parts
W 8054 M0 W 8043 A0 W 2100 M0 W 8051 M0 W 8053 M0 W 8030 A0 W 8033 0
if required
Please note that properly carried out maintenance work is to be acknowledged by filling in the maintenance protocol.
Keyword:
Chiniot 320
Unit no.:
J E800
Module no.: 557786 1
Module type :
JGS 320 GS-N.L
Version:
C105
Engine no.: 557787 1
Issued:
Doku./Provin
Checked:
VMP_Klammer Gerhard/TEAM_Egger Christoph/CSA_Sonnerer Herbert
Index:
d
EN
3_1_EN.doc
Date: 2008-04 -- No.: 2 / 4
3.1 Maintenance schedule
Jenbacher Documentation
2 2 2/20 2/30 2/30/ 60
10 10 10 10 10/20/ 30
20 20 20 30 30 30 30 ZK 30 60 60 60 60 ZK -
ZK = on the occasion of cylinderhead disassembly
Maintenance task/ Inspection task
Number
Operating hours
Valve clearance Ignition system Crankcase vent Regulating rods/Throttle valve/ Actuator
W 0400 M0 W 0303 M0 W 0506 M0
W 0200 M0
Gas train
W 8045 A0
Inspection Turbocharger Engine cooling water pump Starter
I 0103 0 W 8023 M0 W 0202 M3 W 8032 M0
Gas mixer
W 0704 M0
Mixture bypass valve Torsion vibration damper GE Jenbacher-switch cabinets Piston/Piston cooling Con rod/Con rod bearing Cylinder liner/Scraper ring Crankshaft main bearing
W 0802 M0 W 0601 M0 W 8031 A0 W 8047 M0 W 8048 M0 W 8049 M0 W 8050 M0
Camshaft/Steering parts
W 8052 M0
Engine oil pump Turbocharger after-lubrication pump Plate-type heat exchanger Overhaul Exhaust gas manifold/Isolation Cylinder head replacement Generator Elastomer parts
W 8046 M0 W 8054 M0 W 8043 A0 W 2100 M0 W 8051 M0 W 8053 M0 W 8030 A0 W 8033 0
Please note that properly carried out maintenance work is to be acknowledged by filling in the maintenance protocol.
Keyword:
Chiniot 320
Unit no.:
J E800
Module no.: 557786 1
Module type :
JGS 320 GS-N.L
Version:
C105
Engine no.: 557787 1
Issued:
Doku./Provin
Checked:
VMP_Klammer Gerhard/TEAM_Egger Christoph/CSA_Sonnerer Herbert
Index:
d
EN
3_1_EN.doc
Date: 2008-04 -- No.: 3 / 4
3.1 Maintenance schedule
Jenbacher Documentation
2 2 2/20 2/30 2/30/ 60
10 10 10 10 10/20/ 30
20 20 20 30 30 30 30 ZK 30 60 60 60 60 ZK -
ZK = on the occasion of cylinderhead disassembly
Maintenance task/ Inspection task
Number
Operating hours
Valve clearance Ignition system Crankcase vent Regulating rods/Throttle valve/ Actuator
W 0400 M0 W 0303 M0 W 0506 M0
W 0200 M0
Gas train
W 8045 A0
Inspection Turbocharger Engine cooling water pump Starter
I 0103 0 W 8023 M0 W 0202 M3 W 8032 M0
Gas mixer
W 0704 M0
Mixture bypass valve Torsion vibration damper GE Jenbacher-switch cabinets Piston/Piston cooling Con rod/Con rod bearing Cylinder liner/Scraper ring Crankshaft main bearing
W 0802 M0 W 0601 M0 W 8031 A0 W 8047 M0 W 8048 M0 W 8049 M0 W 8050 M0
Camshaft/Steering parts
W 8052 M0
Engine oil pump Turbocharger after-lubrication pump Plate-type heat exchanger Overhaul Exhaust gas manifold/Isolation Cylinder head replacement Generator Elastomer parts
W 8046 M0 W 8054 M0 W 8043 A0 W 2100 M0 W 8051 M0 W 8053 M0 W 8030 A0 W 8033 0