Tips / undocumented functions: - At the top of the main-menu and every folder, the keys 1 to 9 are shortcuts to the icons 1-9 - A shortcut on the left menukey in standby-m standby-mode ode will take more time to open than a shortcut on the right menukey. Reason: The left key is also used for the keylock so it shortly waits for pressing the * button. - While writing text press and hold "#" to switch between Alpha mode and Number mode. You can also press a key long to insert its number. - In standby-mode, press and hold 0 to launch your wap home page. - If you have your keylock activated just press the on/off button to turn on your backlight to look at the time when it's dark without having to unlock the keypad. - To keep the backlight on, run Torch (freeware), (freeware), press and hold the t he Menu button and go somewhere somewhere else on o n the phone. - To check your current firmware version simply type *#0000# in standby screen. - To check your IMEI (International Mobile Equipment Identity) type *#06# in standby screen. - To check your Bluetooth device address a ddress type *#2820# in standby screen. - Start up in Safe Mode (no 'auto start' apps will be running): Hold down the pencil key when you turn on the phone and hold it on until you have to enter your PIN code. - Format the phone memory by typing *#7370# in standby screen. - In standby mode, 45# + dials the number on your sim in memory slot 45. 50# + dials slot 50 and so on. ............................................... ............................................................................. ...................................................... ..................................................... .................................................. ..................... ....... *# 06 # Seriennummer/IMEI indicates (actually also a GSM is code - see further below) ----------------------------------------------------*# 0000 # SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10) --------------------------------------------------------*# 2820 # Bluetooth (BT) device address indicate -----------------------------------------------------------xx # Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #) --------------------------------------------------A/from key Short pressing for menu for switching between profiles ------------------------------------------------------------------Menu key Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.) ------------------------------------------------------------------
Menu quick access Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon). --------------------------------------------------------------------Autostart go around When switching on of the Handys on to the pin p in inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs. -----------------------------------------------------------------------# Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map. ------------------------------------------------------------------------12345 ... is according to standard set the Nokia nokia-Sicherheitscode. -------------------------------------------------------------------0000 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345 -----------------------------------------------------------------------0 - for a long time press If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called. -----------------------------------------------------Your files in MMC are stored in multiple (disk) blocks. So if you format using 16K block, the space used will be 16K eventhough your file is just 1K. If you buy MMC, it is usually preformatted with 16K block. Therefore alot of space is wasted as most installed program files are usually less than 2K. You will need a card reader to do this:1. Connect card reader and copy all your files in the MMC to computer disk. (Make sure you set the show all/hidden/os files to "on") 2. Do a format of the MMC using command command line "format" and use the /A=size option. Alternative, you can use the Disk Management in Adminstrative Tools to format. Make sure you select FAT. For 256MB MMC, MMC, smallest block you can use is 4K, 128MB is 2K, 64Mb is 1K and 32MB is 512B. (Note: You cannot use the phone "format MMC" to do this as the format just clear the allocation table and does not change the block size) 3. Copy back all files to MMC. Now you will find that you will have more space. 256mb MMC got back 30+ mbs ............................................... ............................................................................. ...................................................... ..................................................... .................................................. ..................... ....... Caution - starting from here the codes are " Very Ve ry dangerous" *#7370925538#
* # of res wallet # ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows). NOTE! Afterwards the "wallet" is empty, can again be put on however with new code. ----------------------------------------------------------------*# 7780 # The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered). NOTE! Afterwards various "attitudes" are away - among other things these: ·1 Points of entrance (Provider dependent points of entrance and attitudes) ·2 Bluetooth attitudes ·3 Favorite ·4 Allocation of the two keys (beside Navi keys) in the main menue ·5 Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are... ·6 SMS/MMS/E Mail attitudes ·7 Logos and spielstaende (allegedly) also deleted... Programs, calendars and contacts, etc. not changed... Also the sicherheitscode remains. This putting back goes also via menu under "attitudes - general - original telephone once.". ------------------------------------------------------------------------*# 7370 # Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.) NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting! This is "only" a soft format... Hard format with "green, 3, *"... see below. -------------------------------------------------------------------Green, * 3 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET. NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting! Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears... If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and again try. "only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed. -----------------------------------------------------------------------------------------------------------------------------Mixed * # 92702689 #, then switch - system menu off (goes with me not) The following code do not fold (with me also): * EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization) # EFR0 # (# 3370 #) EFR switch off * HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression) # HRC0 # (# 4720 #) HRC switch off ---------------------------------------------------------------SIM LOCK Simlock status query: (use "*" the key over "p,w" and "+" indications to enter) # pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status # pw+ 1234567890 +3 # Country LOCK status # pw+ 1234567890 +4 # Sim Card LOCK status The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc.... Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can purged. I take over for it no adhesion or responsibility! -----------------------------------------------------------------------GSM code ... should function at each Handy - however Netz(betreiber)abhaengig are... and "harmless"... Generally applies: First enter code, "send" afterwards (< send green key > press) and one moment wait... -----------------------------------------------------------------SMS Tipps To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list . For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports... ---------------------------------------------------------------Mark more simply To Tipps & cheat to the topic "mark" e.g. with SMS entrance. Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick downward. -----------------------------------------------------------------------------------------------------------------------------Call number transmission * 31 # - { CLIR - Calling LINE identification Restriction switches on for the general call number transmission } # 31 # - switch off the general call number transmission # 31 # [ telephone number ] - with the next call suppress the own call number (thus temporary) * 31 # [ telephone number ] - with the next call transfer own call number (thus temporary) * # 31 # - status query (of call number transmission) # 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energised of the Netz(betreiber).) * 30 # - switch { TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller } # 30 # - switch off * # 30 # - status query This also partly goes with 6600 via Men: Attitudes - calls - own No. send... The following codes are not supported by most Netz(betreibern): * # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) { COLP - COonnected LINE identification presentation } * 76 # - switch on # 76 # - switch off * # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) { COLR - COnnected LINE identification Restriction } * 77 # - switch on
# 76 # - switch off -----------------------------------------------------------------------------------------------------------------------------Call bypasses (call Forwarding) Bypass code (U): U=21 always U=61 retards U=62 not attainable U=67 occupies U=61, 62, 67 can be parallel active U=21 - > and then no more call signaling overwrites U=61,62 and 67! Service code (D): Not all nets support all services D=10 language and fax (all calls) D=11 only language D=12 all data (speed/minutes) D=13 only fax D=14 DATEX j (active?) D=15 teletex (active?) D=16 only SMS D=18 all data except SMS D=19 all services except SMS D=20 all services D=21 all asynchronous services D=22 all synchronous services D=23 3.1 kHz GSM of language services D=24 all synchronous POINT ton of POINT DATA inclusive. PADs D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs) D=26 DATA pack exchange on the left of inclusive. PADs D=27 services thru PADs D=29 12 Kbps digitally left -----------------------------------------------------------------------------------------------------------------------------** U * [ goal call number ] * D # - bypass switch on Input without * D means bypass of all services Call bypasses (call Forwarding) 01.01.04 Bypass code (U): U=21 always U=61 retards U=62 not attainable U=67 occupies ** U * [ goal call number ] * D # - bypass switch on Input without * D means bypass of all services ## U ** D # - switch bypass off (individual bypasses and service code) Without ** D all services are switched off to bypasses ## 002 # (all bypasses for all service codes switch off) ## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)
* # U ** D # - status of the bypasses query: Input without ** D queries all services and bypasses Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter Goal call number (e.g. D2-Netz: +49,172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter. Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox). Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] # This also partly goes with 6600 via menu: Attitudes - rufumleitungen -... -----------------------------------------------------------------------------------------------------------------------------Knock/stops/parks/faults Knocks is signaling a secondary call during a current discussion * 43 # - switch on # 43 # - switch off * # 43 # - status query This also partly goes with 6600 via menu: Attitudes - calls - knocking... 0 < sends > - reject while the discussion a knocking 1 < send > - discussion terminate, knocking discussion accept certain discussion (y) terminate 1 (y) < send > 2 < sends > - discussion park, knocking discussion accept certain discussion and new discussion leads 2 parks (y) < sends > 0 < sends > - caller the busy condition signal This also partly goes with 6600 via menus existing during the discussion. -----------------------------------------------------------------------------------------------------------------------------Call barrier Possible only if bypass of the service code is switched off. Check code (S): S=33 all outgoing transmissions S=331 outgoing abroad S=332 outgoing abroad except home S=35 all arriving transmissions S=351 all arriving abroad Special check codes (s) delete: Switch off only in connection with the procedure S=330 check code status outgoing & arriving transmissions switch off S=333 check code status outgoing transmissions switch off S=353 check code status arriving transmissions switch off Service code (D): Not all nets support all services D=10 language and fax (all calls)
D=11 only language D=12 all data (speed/minutes) D=13 only fax D=14 DATEX j (active?) D=15 teletex (active?) D=16 only SMS D=18 all data except SMS D=19 all services except SMS D=20 all services D=21 all asynchronous services D=22 all synchronous services D=23 3.1 kHz GSM of language services D=24 all synchronous POINT ton of POINT DATA inclusive. PADs D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs) D=26 data packet exchange links incl. PADs D=27 services thru PADs D=29 12 Kbps digital link -----------------------------------------------------------------------------------------------------------------------------CHECK SIM-LOCK Note - If you bought your Nokia on UK Vodafone or UK Cellnet you do not need to check this because they both transmit on GSM900, and they don't lock the phones. However if you bought your phone on UK Orange or UK One2one your phone may be blocked. The reason is that they both transmitt on GSM1800. To make a call on GSM1800 you need what is known as a "Dual band" phone. A dual band phone is able to transmit on both GSM900 and GSM1800, so they lock the phones so you can't use it with any other network simcard. If you find that your phone is locked you can try different software to unlock it. (we havn't found one that works yet), or you can ask your service provider who will gladly exchange the 10 digit code for about £35. This is how to check the status of the 4 different locks. Aslo don't try entering the wrong number, because after 3 times it will block the phone for good.
There are 4 different locks on your Nokia phone. COUNTRY-LOCK NETWORK-LOCK PROVIDER-LOCK SIMCARD-LOCK The code to read out the sim-lock status of your phone is
#PW+(MASTERCODE)+(Y)#
# = DOUBLE-CROSS W = PRESS "*" THREE TIMES P = PRESS "*" FOUR TIMES + = PRESS "*" TWO TIMES MASTERCODE = 1234567890 Y = NUMBER 1 TO -----------------------------------------------------------------------------------------------------------------------------THE JAMES BOND TRICK If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying. ----------------------------------------------------Clock Stopping To check weather your SIM Card supports clock stopping type*#746025625# (*#SIM0CLOCK#) --------------------------------------------To enter the service menu type*#92702689# (*#WAR0ANTY#) Serial number (IMEI) Production date (MM/YY) Purchase date (MM/YY) You can only enter the date once. Date of last repair (0000=No repair) Transfer user data to another Nokia phone via Infra-Red -----------------------------------------------------------------------------------------------------------------------------Code's for some older nokia phone -----------------------------------------Nokia code These Nokia codes will work on most Nokia mobile phones, however we accept no responsibility of any kind for damage done to your phone whilst trying these Nokia secret codes.
Nokia code Code function *3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5% #3370# Deactivate Enhanced Full Rate Codec (EFR) *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time *#4720# With this Nokia code you can deactivate the Half Rate Codec *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type *#9999# Phones software version if *#0000# does not work *#06# For checking the International Mobile Equipment Identity (IMEI Number) #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) *#147# This lets you know who called you last (Only vodofone) *#1471# Last call (Only vodofone) *#21# This phone code allows you to check the number that "All Calls" are diverted to *#2640# Displays phone security code in use *#30# Lets you see the private number *#43# Allows you to check the "Call Waiting" status of your cell phone. *#61# Allows you to check the number that "On No Reply" calls are diverted to *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to *#67# Allows you to check the number that "On Busy Calls" are diverted to *#67705646# Phone code that removes operator logo on 3310 & 3330 *#73# Reset phone timers and game scores *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible *#7760# Manufactures code *#7780# Restore factory settings *#8110# Software version for the nokia 8110 *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone o ff then on again *#94870345123456789# Deactivate the PWM-Mem **21*number# Turn on "All Calls" diverting to the phone number entered **61*number# Turn on "No Reply" diverting to the phone number entered **67*number# Turn on "On Busy" diverting to the phone number entered 12345 This is the default security code press and hold # Lets you switch between lines Nokia 1610 / 1611
-------------------------------------------------------------------------------Nokia 1610 / 1611 *#06# for checking the IMEI (International Mobile Equipment Identity) *#170602112302# shows the SW version. Nokia 2010 -------------------------------------------------------------------------------Nokia 2010 To view IMEI number *#06# To view Software Version enter *#9999# *3001#12345 for field test mode and nam selection and some other stuff... Nokia 3210 -------------------------------------------------------------------------------Nokia 3210 *#06# for checking the IMEI of the phone *#0000# shows the software version. Nokia 3310 -------------------------------------------------------------------------------Nokia 3310 *#06# To find IMEI (International Mobile Equipment Identity) *#7780# restores Factory Settings..(Memory, language, counters not included) *#3110# for checking the phone's software (SW) - called firmware revision information. *#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which will save battery time) *#92702689# [*#war0anty#] Phone asks 'warranty code:' Press the following warranty code: 6232 (OK) : Displays the Month and Year of Manufacture 9268 (OK) : Displays Serial Number 7332 (OK) : Displays the date of the last repairment - if found 7832 (OK) : Displays (if found) the date where the phone was purchased 37832 (OK) : Set the Purchasing Date MMYY (This date can be set only once!)
87267 (OK) : Transfers ALL phone numbers, Logo's, and ringtones from other gsm phones -------------------------------------------------------------------------------Nokia 3810 To view IMEI number *#06# To view Software Version enter *#3810# -----------------------------------------------------------------------------------------------------------------------------Nokia 5110 *#06# To look for the IMEI of the phone *#0000# shows the software version. *#746025625# - [*#sim0clock#] Looks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59. *3370# activates the Enchanced Full Rate, after the phone has been turned off. EFR produces better voice quality but also consumes more power. #3370# deactivates the EFR, after the phone has been turned off. *4720# Activates the Half Rate Codec, after the phone has been turned off. HRC produces poorer voice quality but gives your battery better stand-by times. #4720# Deactivates the Half Rate Codec, after the phone has been turned off. Enhanced Full Rate will give you much better sound quality when you enable it. The new EFR codec uses the ACELP compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate codec. The older technology was called LPC-RPE. Both operate at 13 kilobits, but you take up more space on the network, so they can charge you more. Talk-time is reduced with about 5% Half Rate will give you poorer voice quality, which gives the service provider the opportunity to have more calls on the network, and you might get a lower charge from them. Will give you 30% longer talk-time. Nokia 5120 -------------------------------------------------------------------------------Nokia 5120 *3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of other stuff. Nokia 5190 *#06# for checking the IMEI (International Mobile Equipment Identity)
*#5190# shows the SW version. *#92772689# (after removing the analog module) shows service menu. *3001#12345[OK] to enter test mode. *#639# to change NAM. -----------------------------------------------------------------------------------------------------------------------------Nokia 6080 / 6081 *#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# shows the SW version. Nokia 6120 / 6160 / 6162 (TDMA phones) *#92772689# for checking ISDN number. *3001#12345# for field test mode and nam selection and some other stuff... *#9999# shows the SW version. -----------------------------------------------------------------------------------------------------------------------------Nokia 6150 *#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# shows the SW version. *#92702689# to enter service menu. *#92702689# [*#war0anty#] You don't need the warranty-codes any more - you can just scroll through the information like in any other menu. It has the the same data as 81xx and 31xx phones (with "Edit" button for purchase date, and "User data transfer"). Menu: 1: Displays Serial Number. 2: Displays the Month and Year of Manufacture (0997) 3: Displays (if there) the date where the phone was purchased (MMYY) you can here set the Purchasing Date (Warning: You can only do this once - so be careful what you write...) 4: Displays the date of the last repairment - if found (0000) 6: The option is for transferring ALL the telephone data (from the memory) to a "box" so that the technician can fiddle with the phone without worrying about the data stored on it. Stuff stored on the SIM is not transferred, but who delivers their phone with the SIM? -----------------------------------------------------------------------------------------------------------------------------Nokia 6190 *#06# for checking the IMEI (International Mobile Equipment Identity) *#6190# shows the SW version. *#92772689# (after removing the analog module) shows service menu. *3001#12345[OK] to enter test mode. *#639# to change NAM. -----------------------------------------------------------------------------------------------------------------------------Nokia 7110
*#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# To view Software Version. *#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart. *#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart. *#4720# - Half Rate Codec activation. It will automatically restart *#4720* - Half Rate Codec deactivation. It will automatically restart *#746025625# - Sim clock allowed status. *#92702689# [*#war0anty#] - takes you to a secret menu with 6 choices: 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997) 3. Displays (if there) the date where the phone was purchased (MMYY) 4. Displays the date of the last repairment - if found (0000) 5. makes you capebel of transferring user data if you have the gear for it 6. shows how many hours the phone has been on -----------------------------------------------------------------------------------------------------------------------------Nokia 8260 Change Alpha Tag The alpha tag is the message that is displayed on your phone when in digital coverage. This is normally transmitted by the network, but can be overidden to display a different tag. This is done by creating a tag for a personal/residential zone in the phone, and setting this zone to have the same settings as your normal carrier. So when the phone identifies the network system it believes it is in the personal/residential zone and displays the tag you have programmed. 1) Enter programming mode of the phone by keying *3001#12345# 2) Find out the ID of your operator by entering the NAM1 menu. Note the Home System ID setting. (16387 on Rogers AT&T in Calgary) 3) Scroll to and enter PSID/RSID lists (menu 7) 4) Select P/RSID 1 5) Scroll to PSID/RSID and change the setting to 1 6) Scroll to Connected system ID and change the setting to the ID of your system (eg 16387) 7) Scroll to Alpha Tag and enter the message you would like displayed. 8) Scroll to Operator code (SOC) and enter coed for your provider such as 2050 for Rogers or 2049 for AT&T 9) Scroll to Country code and enter 302 for Rogers or 310 for AT&T 10) Power cycle your phone and hopefully your message will be displayed Note: This has only been tested in Calgary on the Rogers AT&T network so may not work on other networks. *3001#12345# Programming Menu: NAMs, Fieldtest, Serial Number, P/RSIDs *#639# Program Phone Number *#92772689# Warranty Information, Serial Number, Life Timer, Build Date, Programmed Date (editable once only) *#9999# Display Software Version -----------------------------------------------------------------------------------------------------------------------------Nokia 8820 / 8860
*3001#12345# gives access to NAM1 and 2, sw version, security, alpha tags and heaps of other stuff. -----------------------------------------------------------------------------------------------------------------------------Nokia 8850 *#06# for checking the IMEI (International Mobile Equipment Identity) *#0000# To view Software Version. -----------------------------------------------------------------------------------------------------------------------------some other codes -------------------------------------------------------------------------------*** WARNING: Using secret codes may be harmful to your phone and result in disabling or worse. Use these codes at your own discretion, we accept no responsiblility for blocked pones while using these codes!!!****** IMEI Number *#06# Cells Identity Code (IMEI = International Mobile Equipment Identity) XXXXXX XX XXXXXX X TAC FAC SNR SP TAC = Type Approval Code (first 2 digits = country code of the approval-country ) FAC = Final Assembly Code: (01,02 = AEG) (10,20 Nokia) (40,41,44 Siemens) (30 Ericsson) (50 Bosch) (51 Sony,Siemens,Ericsson) (60 Alcatel) (65 AEG) (70 Sagem) (75 Dancall) (80 Philips) (85 Panasonic) SNR = Serial Nr. SP = Spare (always "0") Software Version *#0000# shows the software version Signal Processing *3370# - Enchanced full Rate Codec (EFR) activation. It will automatically restart. #3370# - Enchanced full Rate Codec (EFR) deactivation *4720# - Half Rate Codec activation. It will automatically restart. #4720# - Half Rate Codec deactivation Enchanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation
Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5% Sim Clock Stopping *#746025625# [*#sim0clock#] Checks if the sim clock can be stopped. Sim clock stop is a kind of stand-by mode which will save battery time. This code doesn't work with software version 4.59. It will tell you if it can be stopped or not. Warrenty Menu *#92702689# takes you to a secret menu with 6 choices: [*#war0anty#] 1. Displays Serial Number. 2. Displays the Month and Year of Manufacture (0997). 3. Displays (if there) the date where the phone was purchased (MMYY). 4. Displays the date of the last repairment - if found (0000). 5. Makes you capable of transferring user data if you have the gear for it. 6. Shows how long the phone has been used to talk. This counter is not reset by when you "clear timers" like the counters in the call register. Bypass the SP lock With a Nokia 16xx/21xx/31xx/51xx/81xx 1. Insert SIM card of different provider. 2. Turn on the phone and press the UP VOLUME key for 3 sec. Then release it and the phone says PIN CODE? 3. Press the "C" key. 4. Then Press * and wait until it disappears and appears again, then press * one more time and 04*PIN*PIN*PIN# -----------------------------------------------------------------------------------------------------------------------------Nokia Speed Trap Detector Urban Legend spread by Nokia Engineers ;^) The settings for radar speed traps detector. Your Nokia cell phone can be programmed to pick up radar speed traps, when programmed your cell phone picks up the radar and alerts you on the message alert tone. ( Doesn't work with Nokia 7110! ) 1. Enter your menu 2. Select settings 3. Select security settings 4. Select closed user group 5. Select on 6. Enter 00000 7. Press ok 8. Clear back to normal, within a few seconds your phone will display a radar sign with five zero's next to it. It is now activated.
Unfortunately only Nokia phones have this function. The Cell Phone info display needs to be deactivated. Settings -> Phone Settings -> Cell Info display. Each time you turn off your phone, or even each time you loose contact with your carrier, you'll have to activate it again... It is done using steps 1 through 5 above, but the number (00000) will be already on the field as a default. -----------------------------------------------------------------------------------------------------------------------------Network Monitor -------------------------------------------------------------------------------Network Monitor There is a hidden menu inside your Nokia phone. If you want to activate it, you'll have to reprogram some chips inside of your phone. Check your software version. You can only continue if you have v4.33, v4.73 or v5.24. Take apart the phone. De-solder the EEPROM (ATMEL AT 24C64) Read out the data with an EEPROM programmer and save it to a file (Backup) If you have v.33 or v4.73, change the address "03B8" from "00" to "FF" If you have v5.24 then change the address "0378" from "00" to "FF" Write the new data to the EEPROM and solder it back to the phone Power on your phone and you should have "Netmonitor" enabled. The Network Monitor gives you the following information: Carrier number, MS RX Level in DBM, Received signal quality, MS TX power level, C1 (Path loss criterion, used for cell selection and reselection). The range is -99 to 99, RTL (Radio link timeout), Timeslot, Indication of the transmitter status, Information on the Network parameters, TMSI (Temporary Mobile Subscriber Identity), Cell identification (Cell ID, Number of cells being used), MCC (Mobile country code), MCN (Mobile network code), LAC (Location area code), Ciphering (On/Off), Hopping (On/Off), DTX (On/Off), Discard cell barred information. -----------------------------------------------------------------------------------------------------------------------------GSM Network Services Command Strings When various network functions are selected via the cellphone's menu using the keypad, the cellphone automatically generates the corresponding GSM network command string and transmits it to the network. These commands can however be manually entered via the keypad. Each command is prefixed with either one or two * or # characters as follows: ** Register and Activate * Activate ## De-Register (and Deactivate) # Deactivate *# Check Status © Call button -----------------------------------------------------------------------------------------------------------------------------Once each command has been entered, if it is a network command (as opposed to a local handset command) it must be transmitted to the network by pressing the YES (receiver) key which acts as an enter key - this is represented here with the © character. Always enter numbers in full international format +CountryAreaNumber (e.g. +447712345678). Command Description Command String Security
Change call barring code **03*OldCode*NewCode*NewCode#© Change call barring code **03*330*OldCode*NewCode*NewCode#© Change PIN code **04*OldPIN*NewPIN*NewPIN#© Change PIN2 code **042*OldPIN2*NewPIN2*NewPIN2#© Unlock PIN code (when PIN is entered wrong 3 times) **05*PUK*NewPIN*NewPIN#© Unlock PIN2 code (when PIN2 is entered wrong 3 times) **052*PUK2*NewPIN2*NewPIN2#© Display IMEI *#06# Call Forwarding (Diversions) De-register all call diversions ##002#© Set all configured call diversions to number and activate **004*number#© De-register all configured call diversions (no answer, not reachable, busy) ##004#© Unconditionally divert all calls to number and activate **21*number#© Activate unconditionally divert all calls *21#© De-register unconditionally divert all calls ##21#© Deactivate unconditionally divert all calls #21#© Check status of unconditionally divert all calls *#21#© Divert on no answer to number and activate **61*number#© Activate divert on no answer *61#© De-register divert on no answer ##61#© Deactivate divert on no answer #61#© Check status of divert on no answer *#61#© Divert on not reachable to number and activate **62*number#© Activate divert on not reachable *62#© De-register divert on not reachable ##62#© Deactivate divert on not reachable #62#© Check status of divert on not reachable *#62#© Divert on busy to number and activate /td> **67*number#©< Activate divert on busy *67#© De-register divert on busy ##67#© Deactivate divert on busy #67#© Check status of divert on busy *#67#© Change number of seconds of ringing for the given service before diverting a call (such as on no answer). Seconds must be a value from 5 to 30. De-registering the same divert will also delete this change! **service*number**seconds#© (Service numbers, see below) Call barring Activate barr all outgoing calls (see Security to set code) **33*code#© Deactivate barr all outgoing calls #33*code#© Check status of barr all outgoing calls *#33#© Activate barr all calls **330*code#© Deactivate barr all calls #330*code#© Check status of barr all calls /td> *#330*code#©< Activate barr all outgoing international calls **331*code#© Deactivate barr all outgoing international calls #331*code#© Check status of barr all outgoing international calls *#331#© Activate barr all outgoing international calls except to home country **332*code#© Deactivate barr all outgoing international calls except to home country #332*code#© Check status of barr all outgoing international calls except to home country *#332#© Activate barr all outgoing calls **333*code#© Deactivate barr all outgoing calls #333*code#© Check status of barr all outgoing calls *#333#©
Activate barr all incoming calls **35*code#© Deactivate barr all incoming calls #35*code#© Check status of barr all incoming calls *#35#© Activate barr all incoming calls when roaming **351*code#© Deactivate barr all incoming calls when roaming #351*code#© Check status of barr all incoming calls when roaming *#351#© Activate barr all incoming calls **353*code#© Deactivate barr all incoming calls #353*code#© Check status of barr all incoming calls *#353#© Call waiting Activate call waiting *43*#© Deactivate call waiting #43##© Check status of call waiting *#43#© Calling Line Identification The following only works if CLIP and CLIR are enabled (ask your service provider) CLIP: Presentation of the number of the incoming call Activate CLIP **30#© Deactivate CLIP ##30#© Check status of CLIP *#30#© CLIR: Presentation of one's own number to the to the called party Activate CLIR **31#© Activate CLIR for the actual call *31#number© Deactivate CLIR ##31#© Deactivate CLIR for the actual call #31#number© Check status of CLIR *#31#© COLP: Presentation of the actual number reached (if number called was diverted to another number Activate COLP *76#© Deactivate COLP #76#© Check status of COLP *#76#© COLR: Presentation of the original number called by the calling party (if the call was diverted to this cellphone) Activate COLR *77#© Deactivate COLR #77#© Check status of COLR *#77#© ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------GSM Network Service Codes Note that at present only the following service codes are in use: 11 Speech 13 fax 25 data Cell Broadcast While Short Message Service (SMS) can be configured as a personal service, Cell Broadcast is a general service which is designed for subscribers of a specific cell or t opic. For example, a subscriber to cell 050 in England will receive information on the GSM tower currently being used by their phone. This new concept brings a whole new meaning to the term mobile
communications as the phone is now able to receive information such as share prices or weather updates without the need of data cards and computers. At present the following message types exist (note: this may vary from carrier to carrier and some carriers may charge for this service): Code Title 000 Index 010 Flashes 020 Hospitals 022 Doctors 024 Pharmacy 030 Long Distant Road Reports 032 Local Road Reports 034 Taxis 040 Weather 050 District 052 Network Information 054 Operator Services 056 Directory Inquiries (national) 057 Directory Inquiries (international) 058 Customer Care (national) 059 Customer Care (international) In the future one will be able to control each individual call by use of the following service codes. To do this the user has to insert the service code in front of the last # in the MMI command above. For example the sequence *21*number*16# would divert all SMS calls (and only these) to the given number. GSM Operator Codes 202-01 COSMOTE - Greece 202-05 Greece Panafon S A Panafon 202-10 Greece STET Hellas STET Hellas 204-04 KPN Telecom (GSM 900) 204-08 Libertel (GSM 900) 204-12 Telfort (GSM 1800) 204-16 Ben (GSM 1800) 204-20 Dutchtone (GSM 1800) 206-01 Belgium Belgacom BEL PROXI 206-10 Belgium Mobistar BEL mobistar 206-20 KPN Orange Belgium SA 208-01 France France Telecom F Itineris 208-01 Monaco France Telecom F Itineris 208-10 France SFR F SFR 208-10 Monaco SFR F SFR 208- France Bouygues Telecom Bouygues 213-03 Andorra STA Andorra AND M-AND 214-01 Spain Airtel Airtel
214-03 Spain AMENA 214-07 Spain Telefonica Moviles MSTAR 216-01 Hungary Pannon GSM Pannon 216-30 Hungary Westel H-Westel 900 216-70 Hungary Vodafone (GSM 900/1800) 218-01 Bosnia Cronet Cronet 218-90 Bosnia PTT Bosnia BIH PTT-GSM 219-01 Croatia HPT Croatian PTT HR-CRONET 219-10 Croatia VIPNET 220-01 Serbia Mobile Telecomm. MOBTEL 220-03 YU PTT 220-02 Montenegro PROMONTE GSM 220-04 Montenegro MoNet GSM 220-07 Serbia Promonte PROMONTE GSM 222-01 Italy Telecom Italia Mobile TIM 222-01 San Marino Telecom Italia Mobile TIM 222-01 The Vatican Telecom Italia Mobile TIM 222-10 Italy Omnitel Pronto Italia Omni 222-10 San Marino Omnitel Pronto Italia Omni 222-10 The Vatican Omnitel Pronto Italia Omni 222-88 Wind Telecomunicazioni S.P.A, Vatican and San Marino, Italy 222-98 Blu s.p.a. Telefonia mobile Italy 226-01 Romania MobiFon 226-03 Romania Cosmorom 226-10 Romania MobilRom 228-01 Switzerland Swiss PTT CH NAT D 228-01 Liechtenstein Swiss PTT CH NAT D 228-03 Orange Switzerland 230-01 Czech republic Radio Mobil CZ Paegas 230-02 Czech republic Eurotel Praha EUROTEL-CZ 230-03 Czech republic OSKAR 231-01 Slovakia Globtel 231-02 Slovakia Eurotel Bratislava Eurotel Bratislava 232-01 Austria Mobilkom A1 232- Austria O Call TS 232-03 Austria Max Mobil Telekoms A max. 232-05 Connect Austria Gesellschaft für Telekommunikation GmbH - ONE 232-07 tele.ring Telekom Service GmbH - Telering 234-10 UK Cellnet Cellnet 234-15 UK Vodafone Vodafone 234-30 UK One2One/Virgine 234-33 UK Orange 234-50 Jersey Jersey Telecoms Jer 1 234-55 Guersney Guersney Telecom GSY-TEL 234-58 Isle of Man Manx Telecom Manx 235- UK 238-01 Denmark Tele Danmark Mobil DK TDK-MOBIL 238-02 Denmark SONOFON 238- Denmark Telia Denmark Telia DK 238- Denmark Mobilix Mobilix
240-01 Sweden Telia Mobitel S TELIA MOBITEL 240-07 Sweden Comviq S COMVIQ 240-08 Sweden Europolitan Europolitan 240- Sweden Telenordia 242-01 Norway Telenor Mobil N Tele-mobil 242-02 Norway NetCom GSM A/S N NetCom GSM 244-05 Finland Telecom Finland Telecom Finland 244-91 Finland OY Radiolinja Radiolinja 244- Finland Telivo 244- Åland Alands Mobil 246-01 Lithuania Omnitel LT OMNITEL 246-02 Lithuania Mobilios Telekomunikacijos LT BITE 246-03 Lithuania LT TELE2 246-04 ir Lithuanian X-GSM Tele2 247-01 Latvia Latvias Mobilais Telefons LV LMT GSM 247-02 Latvia Baltcom LV BALTCOM 248-01 Estonia Eesti Mobiiltelefon EE EMT GSM 248-02 Estonia Radiolinja Eesti AS RLE-GSM 248-03 Estonia Ritabell Q-GSM 250-01 Russia Mobil Telesystems MTS-RUS 250-02 Russia NW GSM St Petersburg RUS NWGSM 250- Russia DonTelecom 250- Russia United Tele Moscow UTM 250-38 Russia Wireless Technology 250- Russia Extel Mobile Comms Systems 250-99 Russia KB Impuls 255-01 UKR FLASH 257-01 VELCOM Belarus 260-01 Poland Polkomtel SA PL-PLUS 260-02 Poland Polska TelefoniaCyfrowa PL-ERA GSM 260-03 Poland Polska TelefoniaKomorkowa Idea Centertel 262-01 Germany DeTeMobil D1 D1-Telekom 262-02 Germany Mannesmann Mobilfunk D2 D2-Privat 262- Germany E-plus E-plus 262- Germany VIAG E2 265-01 Ukraine UA UMC UA UMC 265- Ukraine Ukrainian Radio System 265- Ukraine Bancomsvyaz 266-01 Gibraltar Gibtel Gibtel GSM 268-01 Portugal Telecel Telecel 268-06 Portugal Telemovel P TMN 268-03 Optimus 270-01 Luxembourg P&T Luxembourg LUXGSM 270-77 Luxemburg (900/1800) Millicom.SA L TANGO 272-01 EIR Eircell IRL EIR-GSM 272-02 EIR Esat Digifone IRL DIGIFONE 274-01 Iceland Postur og simi IS SIMINN 276-01 Albania AMC AMC 278- Malta Advanced 278-01 Malta Telecell Telecell
280-01 Cyprus Cyprus Telecom Auth CY CYTAGSM 283-01 RA-ARMGSM 284-01 Bulgaria MobiTel CITRON BG 286-01 Turkey TurkCell TURKCELL 286-02 Turkey Türk Telekom TR TELSIM 293-41 Slovenia Mobitel DD SI-GSM 293- Slovenia Digitel Digitel 294-01 Macedonia PTT Makedonija MKD-MOBIMAK 302-37 Canada (PCS) Microcell FIDO 310-02 USA (PCS) Sprint Spectrum Sprint 310-15 USA (PCS) BellSouth Mobility PCS 310- USA (PCS) Pacific Bell Mobile Srvs 310- USA (PCS) Western Wireless Corp 310-20 USA (PCS) American Portable Telecoms Sprint 310-16 USA (PCS) Omnipoint Corporation 310-17 USA (PCS) 310-27 USA (PCS) Powertel PCS Partners 310-66 USA (PCS) DigiPH DigiPH 400-01 Azerbadjan Azercell ACELL 401-01 Kazakhstan K-Mobile 401-02 Kazakhstan K-Cell 404-07 India TATA INA-TATA 404-10 India Airtel AIRTEL 404-11 India Essar ESSAR 404-12 India Escotel INA-ESCOTEL 404-19 India Escotel INA-ESCOTEL 404-20 India Max Touch MAXTOUCH 404-21 India BPL Mobile BPL MOBILE 404-27 India BPL Mobile BPL MOBILE 404-30 India Command COMMAND 404-31 India Mobilenet MOBILENET 404-40 India Skycell SKYCELL 404-41 India RPG MAA RPG MAA 404- India Usha Martin 404- India Modi Telstra 404- India Sterling Cellular SCL 404- India Mobile Telecom 404- India Airtouch 404-43 India BPL Mobile BPL MOBILE 404-46 India BPL USWest BPL MOBILE 404- India Koshiki 404- India Bharti Telenet 404- India Birla Comm 404- India Cellular Comms 404-56 India Escotel INA-ESCOTEL 404- India JT Mobiles 404- India Evergrowth 404- India Modicom 404- India Fascel 410-01 Pakistan Mobilink MOBILINK
413-02 Sri Lanka MTN Networks Pvt Ltd SRI DALOG 415-01 Lebanon Cellis (FTML) RL Cellis 415-03 Lebanon Libancell RL LibCL 416-01 Jordan FastLink JOR FSTLNK 417-09 Syria Mobile Syria SYR MOB 418- Iraq Iraq Telecoms + Posts 419-02 Kuwait Mobile Telecom KT MTCNet 420-01 Saudi Arabia MoPTT, DMTS-1 KSA ALJAWWAL 420-07 Saudi Arabia EAE KSA EAE 422-02 Oman General Telecoms GTO 424-01 Un Arab Emirat Etisalat UAE ETSLT 424-02 Un Arab Emirat Etisalat UAE EG2 425- Israel Cellcom Israel Ltd Cellcom 426-01 Bahrein Batelco BHR MPLUS 427-01 Qatar QTel QAT Q-NET 432-11 Iran T.C.I. 432- Iran Celcom 432- Iran Kish Free Zone 438-01 Turkmenistan BCTI 452-01 Vietnam MTCS VMS-GSM 452-02 Vietnam Vinaphone (GSM 900) 454-00 Hong Kong Hong Kong Telecom HK TCSL GSM 454-04 Hong Kong Hutchinson HutchinsonGSM 454-06 Hong Kong Smartone Mobile Comm SmarTone 454- Hong Kong Peoples Telephone Co Ltd 455-01 Macao C.T.M. CTM GSM 457-01 Laos Lao Shinawatra Telecom 460-00 China Guangdong MCC CHNTELGSM 460-01 China China United Telecom CHN-CUGSM 460- China Guangxi PTB 460- China Liaoning PPTA 460- China Beijing Wireless 460- China Zhuhai Comms 460- China Jiaxing PTT 460- China Tjianjin Toll Telecom 460- China DGT MPT 466-92 Taiwan Shungwa Telecom LDM ROCLDGSM 502-01 Malaysia My Digi MY DIGI 502-02 Malaysia My BSB MY BSB 502-12 Malaysia Binariang Maxis Mobile MY maxis 502-13 Malaysia Telecom Malaysia Touch MY MRTEL 502-16 Malaysia Mutiara Telekom DIGI 1800 502-17 Malaysia Sapura Digital Adam PHS MY ADAM 502-19 Malaysia Celcom GSM Celcom 505-01 Australia Telstra Corporation Limited Telstra 505-02 Australia Cable & Wireless Optus Limited YES OPTUS 505-03 Australia Vodafone Network Pty Limited VODAFONE 505-08 Australia One-Tel (GSM 1800) 510- Indonesia PT Kartika Ekamas 510-01 Indonesia PT Satelindo IND SAT-C
510-10 Indonesia Telekomsel TELKOMSELGSM 510-11 Indonesia Excelcom IND-EXCELCOM 510-15 Indonesia Telekomindo Telekomindo 515-01 The Philipines IslaCom ISLA 515-02 The Philipines Globe Telecom GLOBE 515-03 SMART telecommunications, Phlippines 520-01 Thailand Advanced Info Serv Pcl TH AIS GSM 520-18 Thailand Tacs WP1800 525-01 Singapore Singapore Telecom ST-GSM-SGP 525-03 Singapore Mobile One M1-GSM-SGP 528-01 Brunei Jabatan Telekom 528-11 Brunei DSTCom 530-01 New Zealand Bell South BELLSOUTH021 542-01 Fiji Vodafone Fiji VODAFONE 546-01 New Caledonia Mobilis Mobilis 547-20 Fr Polynesia Tikiphone F VINI Fr Pacific Isls Guinea International Wireless 604-01 Morocco ONPT Marocko MOR ONPT 605-02 Tunesia 608-01 Senegal Sonatel 612-01 Ivory Coast Comstar 612-03 Ivory Coast Ivoiris 612-05 Telecel 617-01 Mauritius Cellplus Mobile Comms MRU-CELLPLUS 624-01 Cameroon PTT Cameroon Cellnet CAM CELLNET 633-01 The Seychelles SEZ SEYCEL SEZ SEYCEL 634-01 Sudan MobiTel SDN MobiTel 636-01 Ethiopia ETA ETH-MTN 640-01 Tanzania TriTel TZ-Tritel 641-01 Uganda Celtel Cellular CELTEL 641-10 Uganda Mobile Telephone Networks MTN Uganda. 646-01 Madacom (Madagascar) 646-02 Antaris SMM (Madagascar) 646-03 SACEL (Madagascar) 647-10 Reunion SRR F SFR RU 648-01 Zimbabwe PTC Zimbabwe NET ONE 649-01 Namibia MTC Network NAM MTC 650-01 Malawi Telekom Network MW CP 900 651-01 Lesotho Vodacom VCL COMMS 652-01 Botswana, Mascom Wireless 652-02 Botswana, Vista Cellular 655-01 South Africa Vodacom VodaCom-SA 655-10 South Africa Mobile Telephone Networks MTN-SA ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Some Tips -------------------------------------------------------------------------------Problems with sending files from 7650 to PC via BT
The following tip can be useful for people using Bluetooth hardware (cards, dongles) equipped with Widcomm software (MSI, TDK etc). If you cannot send files from your Nokia to PC, you may want to try the following tip: Open your Windows registry in Registry editor: Menu Start -> Run -> Regedit locate HKEY_CURRENT_USER\Software\Widcomm\BTConfig\Servic es\0004 key locate AcceptOther entry change its value from 0 to 1 reboot your computer. -----------------------------------------------------------------------------------------------------------------------------Game Hacking with Blizzard Get the file called the 'BlizzardN-GAGE.SIS' from IRC get in #mediaplace on Efnet (note: Downloading *******/Hacked games is illegal unless you already own a copy of game) The Blizzard Nokia N-Gage Installer. 1. Unpack Blizzard.sis file that you get from mIRC 2. Transfer the .sis file to your N-Gage 3. Get the .blz (N-gage ROM) from mIRC 4. copy the file to the root dir of your MMC (16MB MMC)Multimedia Card 5. Use the Blizzard application to unpack the .blz file 6. After unpacking the sonic icon should appeared in the MENU 7. Clicked sonic icon and it should work ! List of compatible games for the 3650,6600 and the N-gage that work: [3650] SonicN (v.2.5+) Puyo Pop (v.2.5+) [6600] SonicN Puyo Pop Pandemonium Tomb Raider Super Monkey Ball Tony Hawks Pro Skater [N-Gage] SonicN Puyo Pop Pandemonium Tomb Raider Super Monkey Ball Tony Hawks Pro Skater
-----------------------------------------------------------------------------------------------------------------------------To create .3GP (convert avi, mpg to .3gp file) The most easy way: download Nokia Multimedia Player with 3GP support. Download it from here: CODE http://www.nokia.com/nokia/0,8764,42291,00.html (8MB) This is normal video player for PC platform (Windows OS), but it has several additional functions (conversion to 3gp format). 1) Download and install player. 2) Launch Nokia Multimedia Player. Open your video file (avi or mpg). 3) Press File -> Save as... 4) Enter filename of your 3gp file, and choose resolution and size limit: MMS 64KB, 128*96 MMS 95KB, 128*96 MMS 95KB, 176*144 Custom 200KB, 128*96 Custom 200KB, 176*144 Custom 300KB, 128*96 Custom 300KB, 176*144 No size limit, 128*96 No size limit, 176*144 5) Click Save. File converted. That's all! -----------------------------------------------------------------------------------------------------------------------------[Howto] Backup one MMC to another MMC Backup one MMC to another MMC Back Up one MMC to another MMC Needed Items 1 MMC Reader 1 Cell w/ MMC Ability 1 New MMC 1 Old MMC 1 PC How To Do it 1.) look at the name the first MMC is named and then take it out 2.) put in the new MMC 3.) format and name the new MMC the same as the other one 4.) Take back out the New MMC 5.) put the old MMC into a MMC Reader that is connected to your PC 6.) Coppy all of the MMC *make sure you have "show hidden files" enabled on your PC. see aditional info for this setting at the bottom of this message* 7.) Make a new folder on your Desktop and Past all files into that folder. 8.) Take out the Old MMC and Insert the new MMC into the Reader 9.) Open the new folder on your Desktop
10.) Highlight all of these files and folders, right click on one of the files or folders, select "Coppy" 11.) "Past" files and folders to the New MMC 12.) put the New MMC back into the cellphone, power up, and your done. How To View Hidden Files in MS Windows To view hidden files in Microsoft Windows perform the below steps. 1.) Open explorer 2.) Click the "Tools" drop down menu. 3.) Click either "Folder Options" or "Options". 4.) Click the "View" tab. 5.) Within the view tab select the option "Show hidden files and folders".
Why would you want to do this? 1.) No need to reinstall everything after switching your MMC for a Larger MMC. 2.) Back your current MMC to the PC just to be safe.. never know if your card will crap out on you and give errors or just not work. 3.) This is the ONLY way to do it. -----------------------------------------------------------------------------------------------------------------------------Installation procedure for DKU-5 cable NOTE:: The installation of the cable crivers must be done before installing the pc suite. Also do not have the cable plugged in when installing. Installation:: First install the Connectivity Adapter Cable driver software on your computer from the CD-ROM supplied in the sales package before installation of Nokia PC Suite. You can download the latest version of Connectivity Adapter Cable driver software at CODE http://www.nokia.com. Loading the CD-ROM on your computer 1. Exit all Windows programs and insert the Connectivity Adapter Cable driver CD-ROM into the CD-ROM drive of your computer. 2. If installation does not start automatically, select "Run.." from the "Start" menu and type "D:\start.exe" (where "D:\" refers to the CD-ROM drive of the computer ) and press Enter Installing the driver 1. Follow the on-screen instructions to start an installation wizard, which guides you through the setup process of the driver.
2. The installation wizard first tells you that DKU-5 will be installed on your computer. Click "Next" to continue. 3. When the installation has been completed, in some systems the wizard prompts you to restart your computer. Click "Yes". Note that you must restart your computer before you can use the program. 4. Remove any disks from their drives, and then click "Finish" to complete the setup. For Windows 2000 users When the cable is connected for the first time, Windows 2000 automatically locates the drivers and software that you previously installed. If the "Digital signature not found" message is displayed during the installation process, click
