CXC, CSEC, Economics 2009 May/June Past Papers, Practice Tests, Caribbean Examination Council, Economics,Full description
Description : nebosh
ICAS Past Papers Answers
This is a collection of Past Papers that include Unit 1 and 2 from 2005-2014.
NEBOSH INTERNATIONAL INTERNATIONAL GENERAL GENERAL CERTIFICATE CERTIFICATE IN OCCUPATIONAL HEALTH AND SAFETY UNIT IGC2: CONTROL OF INTERNATIONAL WORKPLACE HAZARDS WEDNESDAY 9 SEPTEMBER 2009 2 hou rs, rs , 1400 1400 to 1600 1600 An sw er bot b oth h Secti Sec ti on 1 and Sec ti on 2. Answer AL Answer AL L questions. The maximum marks for each question, or part of a question, are shown in brackets. Start each answer on a new page. Answers may be illustrated by sketches where appropriate. This question paper must be returned to the invigilator after the examination.
SECTION 1 You are advised to spend about half an hour on on this section, which contains ONE question. ONE question.
Identify FOUR hazards FOUR hazards associated with maintenance operations operations on machinery in the workplace.
Give FOUR examples FOUR examples of how a worker could be injured when carrying out maintenance operations operations on an item of machinery in the workplace.
Outline measures to be taken to minimise the risk of injury during the maintenance of machinery. machinery.
SECTION 2 You are advised to spend about one and a half hours on hours on this section, which contains TEN questions. TEN questions.
Outline factors Outline factors to be considered when carrying out a manual handling assessment of the work undertaken by baggage handlers at a large, busy airport.
Identify factors that may indicate a need for health surveillance of workers in a workplace.
A large office is open to the public for enquiries and the risk assessment has shown a significant risk of violence to workers from visitors . Outline measures that the employer could take to reduce the risk.
A portable electric drill for use on a construction site needs periodic inspection and testing to ensure it is safe to operate. Identify the factors that would determine the frequency of the inspection and testing.
The manager of an industrial unit containing a number of offices and workshops has just completed a risk assessment and is to develop a fire plan. Identify the factors that should be addressed in the fire plan.
Identify possible causes of a mobile crane overturning on a construction site.
Identify activities on a construction site that may expose workers to cement or material containing cement.
Identify the harmful effects to workers which could result from contact with cement.
Identify FOUR types of ionising radiation.
Outline the main control measures for ionising radiation.
Identify possible routes of entry of biological organisms into the body.
Outline control measures that could be used to reduce the risk of infection from biological organisms.
Identif y FOUR hazards that can cause trips or slips.
Identify control measures that can be used to reduce the risk of slips and trips.