menjelaskan tentang perhitungan pada overhead crane
This article was written by a well known construction professional, Professor Indravansha Samarathunga.Full description
monorailFull description
Menyusun anggaran biaya overhead
21 8 2014
BSC 6900 UM TS Pr oduct Documentati on
Soft Handover Handover Ov Overhead erhead Table 1 Soft Handover Overhead Overhead KPI Name
Soft Handover Handover Overhead (RNC) (RNC)
Formula
A1: Number Num ber of UEs with 1 RL in the th e RNC B1: Number Number of UEs with 2 RLs R Ls in the RNC C1: Number Num ber of UEs with 3 RLs in the RNC D1: Number of UEs with 4 RLs in the RNC E1: Number of UEs with 5 RLs in the RNC F1: Number of UEs with 6 RLs in the RNC.
A1: Number of UEs UEs with 1 RL B1: Number of UEs with 2 RLs C1: Number of UEs with 3 RLs D1: Number of UEs with 4 RLs E1: Number of UEs with 5 RLs F1: Number of UEs with 6 RLs. Description
This KPI is used to check the consumption of network resources due to soft handover in an RNC or a Cell. It considered the radio link quantity during the soft handover. In the RNC Soft handover ratio, count the mean number of UEs with different quantity of radio links for RNC from A1 to F1. The RNC periodically samples of the number of UEs with corresponding radio links in a measurement period. At the end of the measurement measurement period, period, the t he RNC divides divides t he accumulated acc umulated number number by the sampling s ampling times to obtain the soft handover overhead. The Cell level KPI is only available for cells in a cluster. From A1 to F1 count the mean number of UEs with different quantity of Radio Links(1~6 radio links) in the Cell of the active set.