Product Features The door can be opened with a touch key. The door can be opened with touch keys contained in the product. Up to 20 touch to uch keys may be registered.
The door can also be opened with a password. Once the user’s password is registered, the door can be opened without a key by entering the registered password. password.
The door does not have to be locke locked d manually. Using the automatic lock function, the door is automatically locked when it closes, eliminating the need to lock it manually.
Double-locking function adds security. The double-locking function adds security by preventing preventing the door from f rom being opened from outside at night or at times when extra security is needed.
Pranks played by children and juveniles can be prevented. When an unregi unregiste stere red d touch touch key is is used used,, or or when when an invali invalid d pass passwor word d is entered 3 or more times consecutively, an alarm sound is generated and power to the lock is automatically cut off for one minute.
Fire-monitoring function helps occupants escape in case of fire. When When the the insi inside de temper temperate ate rises rises to a certai certain n lev level el due to fire, fire, an alarm alarm is automatically generated and the door is opened.
1
Table of Contents
Product Product Components Components.................................. ................................................................... ................................. 6 Outdoor Unit Parts .................................... ...................................................................... .................................. 7 Indoor Unit Parts ................................ ................................................................... ........................................ ..... 8 Replacing Replacing the Batteries ........................................ ....................... 9 Using the Emergency Emergency Battery ...................................... ................10
Init Initia iali liza zati tion on (Pas (Passw swor ord d and Tou Touch ch Key Key)... )...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ..... .. 11 Password Password Registra Registration tion and and Change Change .................................... .............................................. .......... 12 Touch Key Key Registration Registration ......................................... ...................... 14 Deleting the Touch Touch Key............................................................... Key..................................................... ..........16 16 Opening the Door from Outside with a Password Password ............................ 17 Opening the Door from Outside with a Touch Touch Key ........................... 18 Opening or closing the Door from Inside ................................... .......................................19 ....19
Automatic/Manual Automatic/Manual Locking Setting ........................................ ...... 20 Sound Setting and Releasing Releasing ....................................... ............... 21 Alarm Sound/Eme Sound/Emergen rgency cy Sound ............. .................... .............. .............. .............. .............. ......... 22
2
Safety Cautions This section contains important information to ensure the user s safety and prevent prevent potential damage to property. property. Please read read this section carefully carefully and use use the product accordingly. ’
Warning, Caution and Note Explained:
Information given under this heading is information the user must be aware of to prevent physical harm.
Information given under this heading is information the user must be aware of to prevent service service problems or system damage.
Information given under this heading provides additional information relating to the text in this manual.
Description of Symbols General warning or caution
Prohibited activity
Recommended activity
3
Cautions during Installation The user shall not install or repair the product without authorization. The manufacturer does not assume responsibility for damage to the product resulting from attempts to the user to install or repair it without authorization.
Do not install the product in the place where the gap between the door and the frame is 5mm or more. If the gap is too wide, the product may not function properly.
Cautions during Operation Make sure that no unauthorized person has the access to the password. To minimize minimize the risk risk of burglary, it is recommended that you periodically change the password.
Do not use the excessive force or sharp objects to push the door lock buttons, as this can damage the product.
4
Do not operate the product with wet hands, and keep liquids such as water or drinks away from the product, or the product may malfunction or be damaged.
Make sure sure that the door is completely closed when going outside. The manufacturer manufacturer does not assume the responsibility for any harm caused by engagement of the lock on an improperly closed door.
Cautions during Repair or Maintenance Be sure to correctly match the poles (+/-) when installing the batteries. Install the batteries with the correct poles (+/-).
Replace all batteries immediately after they run out of power, and never mix new batteries with used ones.
Improperly installed batteries can cause rupture or battery fluid leakage.
This can cause reduction of product life or a malfunction in the product.
Do not use water, benzene or alcohol when cleaning the product, as these fluids can cause product malfunction.
Replace the batteries within 1 week after the battery replacement replacement alarm sounds.
Use a soft and dry cloth instead.
The product can stop operating if the batteries are not replaced in time.
5
Notes before Operation
Support Panel
Indoor Unit
Outdoor Unit
Indoor Rubber Pad
‘
’
AA Batteries (LR6)
Fastening Panel and Outdoor Unit Fastening Bolts TH+ M5X33 (2EA)
Strike and Fastening Panel Fastening Bolts BH+ 4.2X20 (9EA)
Strike
Touch Key
Indoor Unit Fastening Bolts OH+ M4X32 (2EA)
Indoor Unit Fastening Bolts
User Guide
PH+ M4X33 (2EA)
The product components used may vary depending on the installation environment.
6
Number Pad
[Enter Number] Button Display Lamp Touch Key Contact
External Power Contact
No.
Name
Description Enter numbers when registering, changing, or deleting the password. The door can be opened by entering the registered password onto the number pad. The number pad is lighted so that numbers can be entered well. The display lamp shows the operating status when a touch key is recognized, or the door lock is operating. The Touch Touch Key Contact is i s where the touch key is recognized. The contact itself is slightly grooved. grooved. The door can be opened with a registered touch key. The door can also be locked by placing the touch key on the contact in manual locking mode. Power can be supplied from the emergency battery after the main batteries have been completely discharged (9V battery).
7
[Registration] Button [OPEN] Button Manual Open/Close Lever Double Locking Lever Deadbolt Door Opening Sensor Automatic/Manual Locking Toggle Switch Battery Cover
No.
Name
Description This button is used to register or change a password and a touch key. This is one touch button to be used to unlock the door. (It is also used to lock the door from inside in a manual mode.) It is used to lock or unlock the door manually when the batteries have been completely discharged. It is used to prevent opening the door with a password or a touch from inside. It fastens the door to the door frame. It monitors door opening and closing after the automatic locking function is activated. This switch is used to switch between automatic locking and manual locking. If it is set for automatic locking, the door is automatically locked locked when closed. If it is set for manual switching, the door is not automatically locked when closed. The Battery Cover protects the batteries and the registration button.
8
1. Battery Replacement Alarm Generation Warni War ning ng tune~
If an alarm that sounds like a Toot~ sounds sounds when opening the door using the password or touch key, it is time to replace the batteries. ‘
’
Battery Life Although actual actual battery life differs differs depending depending on the manufacturer, date of production and operation environment, four 1.5V AA alkaline batteries can last for one year, based on an average of 10 uses per day.
2. Opening the Indoor Unit Cover
Lightly press on the battery cover of the indoor unit and push it left.
3. Replacing Replacing the Battery Replace all 4 batteries within a week of the first alarm sound.
4 AA batteries
- The unit will stop operating if the batteries are not replaced.
- If the poles of the batteries are not placed properly, the door lock will not operate normally. - Liquid leaks from batteries can damage the product. Check the batteries regularly (every 6 months). - After the battery replacement alarm has sounded, password/touch key data cannot be registered, changed, deleted, initialized or configured until the batteries are replaced.
9
1. When Lock Fails to Operate Due to Discharged AA Batteries If the batteries are not replaced after their replacement time comes, they will be completely discharged and the door lock will not operate.
Or
Recognition of Touch Key
Password Entry
The door is not opened.
2. Using 9V Battery Buy an emergency battery (9V) at the nearest store.
As the the alka alkaline line batteri batteries es offe offerr longer longer life, life, they they are are reco recomme mmende nded d over the manganese batteries or rechargeable ones.
3. Opening the Door Using the Emergency Battery
Or
Place the touch key on the touch key contact, or enter the password, while the 9V battery is connected to the external power contact of the outdoor unit.
10
Basic Functions This section describes the ways to initialize the information registered registered in the door lock, to register the password and touch key data, and to open or close the door.
All regis register tered ed data data (passwo (password rd and touch touch key) are are dele deleted. ted. After After init initial ializ izatio ation, n, the password is set to 12345 , and the registered registered touch data are erased ‘
’
After After initial initializin izing g the the regis register tered ed data data,, rer reregis egister ter the touch touch key key and and pass passwor word. d. Initialization is available while the door is open.
1. Opening the Cover (from inside) Lightly press the battery cover and push it left, as shown in the diagram.
2. Pressing the [Registration] Button (from inside) Press and hold the seconds or longer.
for 10
- Successful: “TootToot, toot’ sounds are generated.
3. Entering the Password (from outside) Press the registered password, or 4560852580 then press the
‘
’
.
- Successful: “Too~~~t” sound is generated. - Failed: “Toot~” sound is generated.
11
The password password can be 5~12 5~12 digits number. Only one password password can be registered. registered. Please register a new password after initialization.
Always Always hold hold the door door open open while while regist registerin ering g or or changin changing g the the pass passwor word. d.
1. Pressing the [Registration] button (from inside) Toot
Open the battery cover of the indoor unit, and briefly press the [ .
2. Entering the Current Password (from outside) Too~~~t,
toot, toot
Enter the current password ( 12345 after after initialization), and press the ‘ ‘
’
3. Entering a New Password (from outside) Toot, toot
Enter the new password (5 to 12 digits) and press the - To To prevent burglary, it is recommended to use a password of 6 digits or longer. (Only numbers between 0 and 9 can be used.)
12
4. Reentering a New Password (from outside) Too~~~t
Enter the new password again to check if the new password is accurately configured, and then press the
5. Checking New Password Operation (from outside) Too~~~t
To make sure the password has been properly registered, registered, check the new password and close the door. - Please refer to Opening from Outside with a “
Password on on page 17. ”
- Manage your password with care so that unauthorized people will not have access to it. Regularly changing your password can reduce the risk of it being leaked. - A registered password password cannot be deleted. Change the password password to a new one or initialize it to delete all registered data (password and touch key) and then reregister them. - To check the new password, press the door opening sensor while the door is open. When the deadbo deadboltlt is pushed pushed out, out, check check the passwo password rd,, ref referri erring ng to to the the pro procedu cedure re described in “Opening from Outside with a Password. ”
13
Up to 20 touch keys can be registered.
- Registering a touch key is available while the door is open.
1. Pressing the [Registration] Button (from inside) Toot
Open the battery cover of the indoor unit and briefly press the
2. Entering the Password (from outside) Too~~~t,
toot, toot
Enter the password, and press the
.
3. Placing the Touch Key in Contact (from outside) Too~~~t
Place the touch key to be registered on the touch key key contact on the outdoor unit. You will know the touch key has been registered when a long “too~t” sounds.
4. Finishing Fi nishing the Touch Touch Key Registration To complete the touch key registration, press the .
14
5. Confirming Touch Key Registration (from outside) Place the registered touch key to the touch key contact on the outdoor unit. - Please refer to Opening the Door from Outside “
with a Touch Key on page 18. ”
Continued Registration
To register multiple touch keys, lightly press another touch key to the touch key contact within 10 seconds of registering the previous previous touch key. key. If another touch key is not exposed to the touch key contact within 10 seconds of registering the previous touch key, the registration process is automatically terminated.
Registration at another Time
To register an additional touch key after the registration process is terminated, repeat the registration process with the touch key.
15
Registered touch keys keys cannot be individually deleted. All touch key key information information is deleted when the touch key key delete function is selected. Previously registered registered touch keys cannot be used to open the locked door after they are deleted.
1. Pressing the [Registration] Button (from inside) “Toot Toot, toot ”
Open the battery cover of the indoor unit and press and hold the for 5 seconds or longer.
2. Entering the Password (from outside) Successful: “Too~~~t” sound is generated. Failed: “Toot~” sound is generated.
Enter the password, and press the
- Register a new touch key after deleting the touch key data. - To open the locked door from outside after deleting touch key data, use the registered password. - Deleting the registered touch key information is available while the door is open.
16
1. Pressing [Enter Number] button Press the
2. Entering the Password Successful: “ Toot, toot, toot ” Failed: “Toot~”
The number pad is lighted.
Enter the password, and press the or the
- The password must must be entered while the number buttons are are lighted. If the light is turned off, press the and reenter the password. - If the wrong password is entered, press the to cancel the entry and start from the beginning. - If the wrong password is entered 3 times in a row, a toot~ toot~ toot~ alarm will sound for 10 seconds and the door lock will stop operating for 1 minute. While the door is in this inactive mode, a single toot sound is generated every 10 seconds, and seven consecutive toots will sound after 1 minute. Following this, the lock is released from inactive mode “
“
“
”
”
”
17
The door can be opened from outside using a touch key. Place the registered touch key on the touch t ouch key contact.
Applying the Touch Key Successful: “Too~~~t” sound is generated. Failed: “Toot~” sound is generated.
Place the touch key on the touch key contact.
The door will be opened after 1 second.
A Toot~ alarm sound is generated when an unregistered touch key is placed or the touch key is not recognized. “
18
”
Open enin ing g the Do Doo or Automa mattic ical allly T To oo~~~t
Press the on the indoor unit when the door is locked.
Opening the door manually
Rotate the manual Open/Close lever counterclockwise counterclock wise when the door is locked.
Clo Cl osin ing g the Doo oorr Auto toma mattic ica all lly y Too~~~t
The door is opened when the is pressed while the door is locked in the manual locking mode.
Closing the door manually
Rotate the manual Open/Close lever clockwise when the door is locked in the manual locking mode.
19
Additional Functions The automatic locking mode allows for automatic locking of the door when it is closed.
Aut utom oma ati tic c Loc Locki king ng Se Sett ttiing
Set the of the indoor unit to the Autom Automati atic c position. ‘
’
Manu nual al Lo Lock ckiing Se Sett ttiing
Set the of the indoor unit to the Manual position. ‘
’
Difference Differ ence between Automatic and Manual - Automatic Mode: The door is automatically locked 2 seconds after being closed. This mode is not activated when the batteries are completely discharged. - Manual Mode: Mode: The door is not automatically locked after being closed. It is locked locked only when the of the indoor unit, or the of the outdoor unit is pressed, or when a touch key is placed on the touch key contact.
For security reasons, ensure that the door is locked after locking the door in the manual locking mode, since it is not automatically locked after being closed.
- The door lock is set for the automatic locking mode if the deadbolt is automatically pushed out when the door-locking sensor on the indoor unit is pressed by hand while the door is open. - If the door remains open while the automatic locking mode is set, two alarm sounds of are generated generated every every 15 seconds. (This alarm sound is not “too~t, too~t, too~t ” are generated in the manual locking mode.) - The door is automatically locked again if the closed door is not opened within 7 seconds of being unlocked using the password or touch key.
20
The sound that is generated when the number buttons are pressed, when the door is locked or when the locked door is unlocked, can be set according to the user s preference. ’
Sound Function Setting The product is set to generate all sounds at the factory. (Set in 2 steps)
Too~~~t
Toot
Mute 1 Step 2 Step 3 Step
Briefly press the the indoor unit.
on
The sound function is set when the is pressed after the is pressed.
Sound Function Operation - [0] Button: All sounds except the alarm sound are deactivated. - [1]~[3] Button: All sounds are activated and the sound gets louder as the step goes up. - In registration registration mode, sound is generated generated regardless regardless of the current setting. The setting is in effect when registration is completed. - The sound function is set in two steps after initialization..
21
Alarm Sound (Prank Prevention Function) This function generates an alarm sound and deactivates door lock operation when it is improperly handled from outside.
Touch Key or Password Error “Too~t Too~t”
“Too~t Too~t”
(for 10 seconds)
(for 10 seconds)
This alarm will sound if an attempt is made to open the door with an invalid touch key, or if a wrong password is entered three times in a row. (The alarm sound is generated, and the door lock is deactivated for 1 minute. While the door is in this inactive mode, a single toot sound is generated every 10 seconds and seven consecutive toots will sound after 1 minute. nute. Following this, the lock is released from inactive mode.) “
Number Pad Operation Ope ration Error
”
“
”
This alarm will sound if the is pressed for three times without entering the password. (The alarm sound is generated and the door lock is deactivated for 1 minute. While the door is in this inactive mode, a single toot sound is generated every 10 seconds and seven consecutive consecutive toots will sound after after 1 minute. minute. Following this, the lock lock is released from inactive mode.) “
”
“
”
Releasing the Alarm
Or
Press the the
22
of the indoor unit or .
Expose the registered touch key to the touch key contact, or enter the password, and then press the (The alarm must be released within 10 seconds of its activation.)
Setting the Security S ecurity Function This function prevents prevents intrusion from outside while the residents residents are are out. Once set, it generates an alarm sound when the door lock is operated from inside. F S u e n t c t i t n i g o n t h e S e c u r i t y
Too~~t oo~~t,, Too~~t
“
”
Too~~~t
“
”
Press and hold the on the outd outdoor oor unit unit Enter the password and press the for 3 seconds while the door is being locked. to set the security function.
The security function is automatically released when the locked door is opened from outside by entering the registered password or placing the touch key on the touch contact.
S A e c c t i u v r a i t t y i n F g u t n h c e t i o n
S R e e c l u e r a i s t y i n g F u t n h c e t i o n
“Too~t, too~t, too~t”
(for 5 minutes) This alarm sounds if an attempt is made to open the door from inside by pressing the [OPEN] button, or by rotating the manual Open/Close lever on the indoor unit counterclockwise .
Or
Place the touch key on the touch key contact, or enter the password, and then press the
23
Intrusion Detection Function This function generates the alarm sound when an attempt is made to forcefully open the door from the inside or the outside. (This is a basic function of the lock, and cannot be separately set or released.) “Toot~, toot~, toot~”
(for 5 minutes) If the door is forcefully opened while locked, the door opening sensor detects it and generates the alarm sound.
Releasing the Emergency Sound
Or
Open the battery cover of the indoor unit and take out the batteries, or press one of the .
Or
Place the touch key on the touch key contact, or enter the password, and then press the
Fire Detection Function This function generates the alarm sound when fire is detected so that the residence can quickly respond. (The fire detection function is a basic function of the lock, and cannot be released by the user.) “Toot~, toot~, toot~”
(for 15 seconds)
When When fire fire occurs occurs,, the the temp temper eratu ature re sensor sensor detect detectss it and flashes flashes the [OPEN] [OPEN] button button while while generating the alarm sound. The door is automatically opened after the alarm sound has stopped. (The door lock resumes normal operation if the inside temperature returns to a normal level.)
The fire detection function function is activated when the temperatur temperature e rises around 55℃ (sensor operating operating temperature of around 50℃). Actual temperature can differ depending on the installation environment.
24
Double Locking The double locking function prevents prevents opening of a locked door from outside. S e t t i n g D o u b l e L o c k i n g
A c t i v a t i n g D o u b l e L o c k i n g R e l e a s i n g D o u b l e L o c k i n g
Push the double locking lever upward until the red part is shown .
“Too~~t, too~~t”
“Too~~t, too~~t”
The door can not be opened by pressing the from inside when the double locking function is set. The door, however, can be opened by rotating the manual Open/Close lever counterclockwise.
The door can not be opened even when the is pressed, or the registered touch key is placed while an alarm sound is generated.
Make sure if the double locking lever is put where the red part is shown.
Push the double locking lever so that the green part is shown.
Please be cautious since the door cannot be opened from outside when this function is set. The door will not be locked and generate an alarm sound even when the door is closed in case the double locking function is set while the door is open. Release the double locking function to lock the door.
25
Troubleshooting Please refer refer to the following following if the door lock does not operate properly. properly. If the problem problem can still not be solved, contact the nearest service center.
Power Source Problem
There is no power.
Solution
Remark
- Check if one of the number buttons are pressed. - Check to ensure the batteries are in good condition, with the poles (+/-) correctly placed. - Check to see if the batteries are discharged, or have been inserted improperly.
P. 9~10
Password / Touch Key Problem
Solution
Remark
- This may be a case of delayed password change. The password must be changed while the number pad is lighted. Furthermore, the new password must be entered within 10 seconds of entering the previous one. - Replace the batteries if they are discharged. - Repeat the procedure again, referring to Password Registration/Change in the user guide.
P. 12~13
The touch key cannot be registered.
- When registering multiple touch keys continuously, the next touch key must be placed on the touch key contact within 10 seconds of the previous touch key.
P. 14~15
The door cannot be opened even after entering the password followed by the .
- Check that the registered password has been correctly entered. - If the light of the number pad turns out while the password is being entered, then the entry will not be accepted. Reenter the password from the beginning beginning when the number pad is lighted again after pressing the . (The light of the number pad is automatically turned off if an entry is not initiated within 5 seconds.)
P. 17
The door cannot be opened with a touch key.
- This may be a case of an unregistered touch key being used, or of the touch key not being recognized. Register the touch key, and try to open it again. - The touch key must be properly placed on the touch key contact.
P. 18
The password cannot be changed.
“
”
26
Problem The door cannot be opened with the password or touch key.
The password or touch key registration data can be verified, but the door cannot be opened.
Solution
Remark
- The door cannot be opened from the outside using the password, or touch key if the double locking function has been activated. If the double locking function is activated, a “too~~t, too~~t” sound is generated when the is pressed. -. When the double locking lever is put in locking mode , the door lock is set in the double locking mode.
P. 25
This could be a malfunction of the door lock. Please call the nearest service center.
-
Automatic Locking Problem The door does not lock automatically after being closed.
Solution - Check to ensure that the automatic locking mode has been set. If the operation mode is set to the manual locking mode, place the touch key on the touch key contact, or press the to lock the door. - If the door does not automatically lock when in the automatic locking mode, then the door lock is installed improperly. Contact the digital door lock distributor to have it reinstalled. - The automatic locking function will not work if the batteries are completely discharged. Check the batteries.
Remark
P. 20
Alarm Sound Problem The “too~~t, too~~t” alarm sound is generated when the is pressed. A stra strange nge sound sound (too~t, too~t, too~t) occurs when the door lock operates.
Solution - The alarm sound is generated if the is pressed while the double locking function is activated. Release the double locking function before using the door lock. - It is notifying you that the batteries need to be replaced. Please change the batteries within 1 week.
Remark
P. 20
P. 9
Operation Problem Problem Even when the is pressed, or the touch key is placed, there is no response.
Solution - Press the right part of the external power contact on the outdoor part with a pin. - Please contact the nearest if the door lock does not operate even after the measure above is taken.
Remark
-
27
Operating Method Summary ※Make sure sure if a door is open to initialize, register, change or delete registered registered data.
Function
Default
Setting or Releasing (Press the buttons in the given order.) Press and hold the for 10 seconds Enter the current password or ‘4560852580’ Press the
-
※ The password is set to ‘12345’ after initialization. Current Password or 12345 ‘
’
Current password entry + New password entry + New password reentry +
None
Password entry + Place the touch key on the contact
None
Press and hold the Password entry +
for 5 seconds button
-
Autom Automati aticall cally) y) Press Press when the door is locked The door is open. Manually) Rotate the manual Open/Close lever counterclockwise The door is locked. locked.
-
Autom Automati aticall cally) y) Press Press when the door is opened The door is locked. Manually) Rotate the manual Open/Close lever clockwise The door is locked.
-
-
Touch Key: Place the touch key on the contact. Password: Press the password Autom Automatic atic Locking: Locking: Close Close the the door door.. Manual Locking: Press the touch key.
Enter a
, or place the
Place the [Automatic/Manual Locking] toggle switch in the Au ‘ tomati atic c’ position. Autom Automati atic c Autom Locking Place the [Automatic/Manual Locking] toggle switch in the ‘Manual’ position. 2 (“Setting”)
28
Press and hold the Press , ,
. , or
+
.
Function
Default -
Setting or Releasing (Press the buttons in the given order.) Press the for 3 seconds while the door is locked. Enter the password passw ord + . Enter the password, or place the touch key.
-
Press the
.
Enter the password, or place the touch key.
-
Place the double locking lever in the ‘lock ’ mode while the door is locked.
-
Place the double locking lever in the ‘unlock ’ mode.
29
Product Specifications Item
Specifications 4 AA Alkaline 1.5 Batteries (LR6) (6V) 9V Battery (6LF22) (Separately purchased) Electronic Control Method (Password entry or touch key contact) 1.8Kg (including both indoor and outdoor units) Outdoor Unit (including the handle)
68.7 mm(W)×175.1mm(H)×21.5 mm(D)
Indoor Unit (including the handle)
180.7 mm(W)×91.5 mm(H)×48 mm(D)
Touch Key
16.2 mm(W)×38.3 mm(H)×23.5 mm(D)
The content of this manual is subject to change without prior notice to the user in order to enhance performance of the product.
30
Warranty