Structural Design Eurocodes 2009

WB9705_BSI Eurocodes Bro:BSI_Bro 17/02/2009 15:04 Page 1

www.bsigroup.com/Eurocodes

Basis of structural design Action on structures Design of concrete structures Design of steel structures Design on composite steel and concrete structures Design of timber structures Design of masonry structures Geotechnical design Design of structures for earthquake resistance Design of aluminium structures

2009 Eurocodes

raising standards worldwide ™

An essential guide to the structural Eurocodes


Structural Design Eurocodes The Eurocodes are seen as leading the way in structural codes. Their flexibility enables adoption and use not only within Europe, but internationally. This feature has been recognized by several countries outside Europe and they are already committed to adopting Eurocodes. The primary objectives of the Eurocodes are to: • Provide common design criteria and methods of meeting necessary requirements for mechanical resistance, stability and resistance to fire, including aspects of durability and economy • Provide a common understanding regarding the design of structures between owners, operators and users, designers, contractors and manufacturers of construction products • Facilitate the marketing and use of structural components and kits in EU Members States • Facilitate the marketing and use of materials and constituent products, the properties of which enter into design calculations • Be a common basis for research and development, in the construction industry • Allow the preparation of common design aids and software • Increase the competitiveness of the European civil engineering firms, contractors, designers and product manufacturers in their global activities

Contents The Eurocodes comprehensively cover all principal construction materials. They are structured and located in this brochure as follows: Eurocode Series Basis of structural design

Page 03

Eurocode 5 Series Design of timber structures

Page 13

Eurocode 1 Series Action on structures

Page 03

Eurocode 6 Series Design of masonry structures

Page 14

Eurocode 2 Series Design of concrete structures

Page 06

Eurocode 7 Series Geotechnical design

Page 15

Eurocode 8 Series Design of structures for earthquake resistance

Page 16

Eurocode 9 Series Design of aluminium structures

Page 18

Eurocode 3 Series Design of steel structures Eurocode 4 Series Design on composite steel and concrete structures

2

Page 08

Page 12

To order please call BSI Customer Services on +44 (0)20 8996 9001 or visit www.bsigroup.com/shop

* P&P £5.95 (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all eShop purchases and downloads, CDs, DVDs and other electronic products. All prices, content and publishing dates may be subject to change.


Eurocode Series Basis of structural design Eurocode. Basis of structural design is the lead document in the Eurocode suite. It describes the principles and requirements for safety, serviceability and durability. It also provides the basis and general principles for the structural design and verification of buildings and civil engineering works (including geotechnical aspects). It is the first operational 'material-independent' design code. BS EN 1990:2002 should be used in conjunction with all the other Eurocodes (BS EN 1991 to BS EN 1999) for design. For more information about the standards in this series visit: www.bsigroup.com/Eurocode0

BS EN 1990:2002 Eurocode. Basis of structural design BS EN 1990 describes the principles and requirements for safety, serviceability and durability of structures, the basis for their design and verification and gives guidelines for related aspects of structural reliability. It is based on the limit state concept used in conjunction with a partial factor method.

ESSENTIAL DOCUMENT • A4 Loose-leaf/PDF • 118 pages • Published by BSI • ISBN 0 580 40186 3 • BSI order ref BS EN 1990:2002 Price £190*, Member Price £95

UK National Annex to BS EN 1990:2002

FREE DOWNLOAD BSI Structural Eurocodes Companion This essential guide contains articles from leading academics and professionals to help you gain an understanding of the nature of the new codes. It will ease your integration into the new approach.

Download your free copy at www.bsigroup.com/bip2159

• A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 0 580 44890 8 • BSI order ref NA to BS EN 1990:2002 Price £40*, Member Price £20

BS EN 1990:2002 and UK National Annex Includes BS EN 1990:2002 and the accompanying UK National Annex • Published by BSI • ISBN 0 580 45399 5 Price £198*, Member Price £99

Eurocode 1 Series Actions on structures Eurocode 1 Actions on structures provides comprehensive information on all actions that should normally be considered in the design of buildings and civil engineering works. It is in four main parts. The first part is divided into seven sub-parts which cover densities, self-weight and imposed loads; actions due to fire; snow; wind; thermal actions; loads during execution and accidental actions. The remaining three parts cover traffic loads on bridges, actions by cranes and machinery and actions in silos and tanks. The following National codes are affected and will be withdrawn by March 2010: • BS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed loads • BS 6399-2:1997 Loading for buildings. Code of practice for wind loads • BS 6399-3:1988 Loading for buildings. Code of practice for imposed roof loads • BS 5400-1:1988 Steel, concrete and composite bridges. General statement • BS 5400-2:2006 Steel, concrete and composite bridges. Specification for loads For more information about the standards in the Eurocode 1 Series visit: www.bsigroup.com/Eurocode1



3


Eurocode 1 Series Actions on structures BS EN 1991-1-1:2002 Eurocode 1. Actions on structures. General actions. Densities, self-weight, imposed loads for buildings BS EN 1991-1-1 gives design guidance and actions for the structural design of buildings and civil engineering works including some geotechnical aspects for the following subjects: • Densities of construction materials and stored materials • Self-weight of construction works • Imposed loads for buildings.

• A4 Loose-leaf/PDF • 50 pages • Published by BSI • ISBN 0 580 43575 X • BSI order ref BS EN 1991-1-1:2002 Price £158*, Member Price £79

UK National Annex to BS EN 1991-1-1:2002 • A4 Loose-leaf/PDF • 16 pages • Published by BSI • ISBN 0 580 47335 X • BSI order ref NA to BS EN 1991-1-1:2002 Price £84*, Member Price £42

BS EN 1991-1-3:2003 Eurocode 1. Actions on structures. General actions. Snow loads BS EN 1991-1-3 provides guidance for the calculation of: • Snow loads on roofs which occur in calm or windy conditions • Loads imposed by snow sliding down a pitched roof on to snow guards and other obstacles • Loads due to snow overhanging the cantilevered edge of a roof • Snow loads on bridges. This standard applies to new buildings and structures and to significant alterations to existing buildings and structures. • A4 Loose-leaf/PDF • 62 pages • Published by BSI • ISBN 0 580 42307 7 • BSI order ref BS EN 1991-1-3:2003 Price £168*, Member Price £84

UK National Annex to BS EN 1991-1-3:2003 • A4 Loose-leaf/PDF • 14 pages • Published by BSI • ISBN 0 580 47334 1 • BSI order ref NA to BS EN 1991-1-3:2003 Price £68*, Member Price £34

BS EN 1991-1-1:2002 and UK National Annex Includes BS EN 1991-1-1:2002 and the accompanying UK National Annex. • Published by BSI • ISBN 0 580 47684 7 • BSI order ref KIT 185 Price £218*, Member Price £109

BS EN 1991-1-2:2002 Eurocode 1. Actions on structures. Actions on structures exposed to fire The methods given in this part of BS EN 1991 are applicable to buildings, with a fire load related to the building and its occupancy. BS EN 1991-1-2 also deals with thermal and mechanical actions on structures exposed to fire, and thermal actions related to nominal and physically based thermal actions.

BS EN 1991-1-4:2005 Eurocode 1. Actions on structures. General actions. Wind actions BS EN 1991-1-4 gives design guidance and actions for the structural design of buildings and civil engineering works for wind. This includes the whole structure or parts of the structure or elements attached to the structure, e. g. components, cladding units and their fixings, safety and noise barriers. This part is intended to predict characteristic wind actions on land-based structures, their components and appendages. • A4 Loose-leaf/PDF • 152 pages • Published by BSI • ISBN 0 580 45959 4 • BSI order ref BS EN 1991-1-4:2005 Price £228*, Member Price £114

UK National Annex to BS EN 1991-1-4:2005 • A4 Loose-leaf/PDF • 62 pages • Published by BSI • ISBN 0 580 40831 0 • BSI order ref BS EN 1991-1-2:2002 Price £168*, Member Price £84

UK National Annex to BS EN 1991-1-2:2002 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 978 0 580 50603 1 • BSI order ref NA to BS EN 1991-1-2:2002 Price £40*, Member Price £20

• A4 Loose-leaf/PDF • 40 pages • Published by BSI • ISBN 978 0 580 63621 9 • BSI order ref NA to BS EN 1991-1-4:2005 Price £130*, Member Price £65

BS EN 1991-1-5:2003 Eurocode 1. Actions on structures. General actions. Thermal actions BS EN 1991-1-5 gives design guidance for thermal actions arising from climatic and operational conditions on buildings and civil engineering works.

PD 6688-1-2 Background paper to the UK National Annex to BS EN 1991-1-2 • A4 Loose-leaf/PDF • 22 pages • Published by BSI • ISBN 978 80 50604 8 • BSI order ref PD 6688-1-2 Price £84*, Member Price £42

• A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 0 580 43011 1 • BSI order ref BS EN 1991-1-5:2003 Price £168*, Member Price £84


4




Eurocode 1 Series Actions on structures BS EN 1991-1-6:2005 Eurocode 1. Actions on structures. General actions. Actions during execution BS EN 1991-1-6 describes principles and application rules for the determination of actions to be considered during execution of buildings and civil engineering works, including the following aspects: • Actions on structural and non-structural members during handling • Geotechnical actions • Actions due to prestressing effects • Pre-deformations • Temperature, shrinkage, hydration effects • Wind actions • Snow loads • Actions caused by water • Actions due to atmospheric icing • Construction loads • Accidental actions • Seismic actions. • A4 Loose-leaf/PDF • 34 pages • Published by BSI • ISBN 0 580 46784 8 • BSI order ref BS EN 1991-1-6 Price £138*, Member Price £69

UK National Annex to BS EN 1991-1-6:2005

BS EN 1991-2:2003 Eurocode 1. Actions on structures. Traffic loads on bridges BS EN 1991-2 defines models of traffic loads for the design of road bridges, footbridges and railway bridges. For the design of new bridges, BS EN 1991 is intended to be used for direct application, together with Eurocodes BS EN 1990 to BS EN 1999. BS EN 1991-2:2003 supersedes: DD ENV 1991-3:2000 Eurocode 1. Basis of design and actions on structures. Traffic loads on bridges , which is withdrawn. • A4 Loose-leaf/PDF • 170 pages • Published by BSI • ISBN 0 580 42879 6 • BSI order ref BS EN 1991-2:2003 Price £228*, Member Price £114

UK National Annex to BS EN 1991-2:2003 • A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 978 0 580 63216 7 • BSI order ref NA to BS EN 1991-2:2003 Price £168*, Member Price £84

BS EN 1991-3:2006 Eurocode 1. Actions on structures. Actions induced by cranes and machines BS EN 1991-3 gives design guidance and actions for the structural design of buildings and civil engineering works, including the following aspects: • Actions induced by cranes • Actions induced by machinery.


• A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 0 580 48268 5 • BSI order ref BS EN 1991-3:2006 Price £168*, Member Price £84

BS EN 1991-1-7:2006 Eurocode 1. Actions on structures. General actions. Accidental actions BS EN 1991-1-7 describes principles and application rules for the assessment of accidental actions on buildings and bridges. The following actions are included: • Impact forces from vehicles, rail traffic, ships and helicopters • Actions due to internal explosions • Actions due to local failure from an unspecified cause.



BS EN 1991-4:2006 Eurocode 1. Actions on structures. Silos and tanks BS EN 1991-4 gives design guidance for the assessment of actions for the structural design of silos and tanks. It also includes some provisions for actions on silo and tank structures that are not only associated with the stored solids or liquids – e.g. the effects of thermal differentials, aspects of the differential settlements of batteries of silos. BS EN 1991-4:2006 supersedes: DD ENV 1991-4:1996 Basis of design and actions on structures. Actions on silos and tanks, which is withdrawn. BS 8007:1987 Code of practice for design of concrete structures for retaining aqueous liquids, which is soon to be withdrawn. • A4 Loose-leaf/PDF • 112 pages • Published by BSI • ISBN 0 580 48260 X • BSI order ref BS EN 1991-4:2006 Price £190*, Member Price £95

Publications yet to be published in the Eurocode 1 Series: Actions on structures PD 6688-1-4 Background paper to the UK National Annex to BS EN 1991-1-4

UK National Annex to BS EN 1991-3:2006 General actions. Snow loads

PD 6688-1-5 Background paper to the UK National Annex to BS EN 1991-1-5

UK National Annex to BS EN 1991-4:2006 Silos and tanks

PD 6688-2 Proposed title: Recommendations for the design of structures to BS EN 1992-2

For an up-to-date publication schedule visit: www.bsigroup.com/Eurocodesschedule



5


Eurocode 2 Series Design of concrete structures Eurocode 2 Design of concrete structures is concerned with the requirements for resistance, serviceability, durability and fire resistance of concrete structures. It applies to the design of buildings and civil engineering works in plain, reinforced and prestressed concrete. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verifications that are given in BS EN 1990:2002 Basis of structural design. The following National codes are affected, and are now obsolete: • BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction • BS 8110-2:1985 Structural use of concrete. Code of practice for special circumstances • BS 8110-3:1985 Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns • BS 5400 Series: Steel, concrete and composite bridges For more information about the standards in the Eurocode 2 Series visit: www.bsigroup.com/Eurocode2

BS EN 1992-1-1:2004 Eurocode 2. Design of concrete structures. General rules and rules for buildings BS EN 1992-1-1:2004 gives a general basis for the design of structures in plain, reinforced and prestressed concrete made with normal and light weight aggregates together with specific rules for buildings. BS EN 1992-1-1:2004 supersedes: DD ENV 1992-1-1:1992, DD ENV 1992-1-3:1996, DD ENV 1992-1-4:1996, DD ENV 1992-1-5:1996, DD ENV 1992-1-6:1996 that are withdrawn. It will also replace BS 8110 parts 1-3 in due course. • A4 Loose-leaf/PDF • 230 pages • Published by BSI • ISBN 0 580 45191 7 • BSI order ref BS EN 1992-1-1:2004 Price £248*, Member Price £124

UK National Annex to BS EN 1992-1-1:2004 • A4 Loose-leaf/PDF • 26 pages • Published by BSI • ISBN 0 580 47244 2 • BSI order ref NA For BS EN 1992-1-1:2004 Price £120*, Member Price £60

BS EN 1992-1-1:2004 and UK National Annex Includes BS EN 1992-1-1:2004 and the UK National Annex to BS EN 1992-1-1:2004 • Published by BSI • ISBN 0 580 47683 9 Price £332*, Member Price £166

• BSI order ref KIT 184

BS EN 1992-1-2:2004 Eurocode 2. Design of concrete structures. General rules. Structural fire design BS EN 1992-1-2 deals with the design of concrete structures for the accidental situation of fire exposure and is intended to be used in conjunction with BS EN 1992-1-1 and BS EN 1991-1-2. BS EN 1992-1-2 identifies differences from, or supplements to, normal temperature design, and with passive methods of fire protection. The publication applies to concrete structures that are required to fulfil certain functions when exposed to fire, in terms of: • Avoiding premature collapse of the structure (load bearing function) • Limiting fire spread (flame, hot gases, excessive heat) beyond designated areas (separating function). • A4 Loose-leaf/PDF • 100 pages • Published by BSI • ISBN 0 580 45414 2 • BSI order ref BS EN 1992-1-2:2004 Price £180*, Member Price £90


BS EN 1992-1-2:2004 and UK National Annex Includes BS EN 1992-1-2:2004 and the UK National Annex to BS EN 1992-1-2:2004. • Published by BSI • ISBN 0 580 47681 2 • BSI order ref KIT 182 Price £200*, Member Price £100

FREE DOWNLOAD Construction brochure Download the latest Construction and built environment brochure at

www.bsigroup.com/constructionstandards

6


PD 6687:2006 Background paper to the UK National Annexes to BS EN 1992-1 PD 6687:2006 is a background paper that gives non-contradictory complementary information for use in the UK with BS EN 1992-1-1 and BS EN 1992-1-2 and their UK National Annexes. • A4 Loose-leaf/PDF • 34 pages • Published by BSI • ISBN 0 580 47942 0 • BSI order ref PD 6687:2006 Price £138*, Member Price £69



Eurocode 2 Series Design of concrete structures BS EN 1992-2:2005 Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules BS EN 1992-2 describes the principles and requirements for safety, serviceability and durability of concrete structures, together with specific provisions for bridges. It is based on the limit state concept used in conjunction with a partial factor method. BS EN 1992-2 replaces DD ENV 1992-2:2001 and DD ENV 1992-1-2:1996 which are withdrawn. It will also replace BS 5400-4:1990, BS 5400-7:1978 and BS 5400-8:1978 in due course.

BS EN 1992-3:2006 Eurocode 2. Design of concrete structures. Liquid retaining and containing structures BS EN 1992-3 covers additional rules to those in Part 1 for the design of structures constructed from plain or lightly reinforced concrete, reinforced concrete or prestressed concrete that contain liquids or granular solids. Principles and application rules are given in this part for the design of those elements of structure which directly support the stored liquids or materials (i.e. the directly loaded walls of tanks, reservoirs or silos). This standard supersedes: DD ENV 1992-4:2000.



UK National Annex to BS EN 1992-2:2005


• A4 Loose-leaf/PDF • 20 Pages • Published by BSI • ISBN 978 0 580 60961 9 • BSI order ref NA to BS EN 1992-2:2005 Price £84*, Member Price £42

• A4 Loose-leaf/PDF • 8 Pages • Published by BSI • ISBN 978 0 580 53548 2 • BSI order ref NA to BS EN 1992-3:2006 Price £40*, Member Price £20

Sign up to free e-Newsletters To keep up-to-date with the latest developments in construction and Eurocodes, sign up to receive our sector-specific newsletters at

www.bsigroup.com/newsletters

PD 6687-2:2008 Recommendations for the design of structures to BS EN 1992-2:2005 This Published Document contains non-contradictory complementary information for use with BS EN 1992-2 and its UK National Annex for the design of concrete structures. It is recommended that reference also be made to PD 6687:2006 which contains non-contradictory complementary information that supports BS EN 1992-1. Parts of PD 6687 are relevant to the design of structures to BS EN 1992-2. It does not cover assessment. • A4 Loose-leaf/PDF • 36 pages • Published by BSI • ISBN 978 0 580 58681 1 • BSI order ref PD 6687-2:2008 Price £130*, Member Price £65

Publications yet to be published in the Eurocode 2 Series: Design of concrete structures UK National Annex to BS EN 1992-2:2005 Concrete bridges. Design and detailing rules PD 6687-1 Background paper to the UK National Annexes to BS EN 1992-1, 2 and 3 PD 6687-2 Background paper to the UK National Annex to BS EN 1992-2 UK National Annex to BS EN 1992-3:2006 Liquid retaining containing structures BS EN 13670 Execution of concrete structures




7


Eurocode 3 Series Design of steel structures The scope of BS EN 1993 Eurocode 3 Design of streel structures is wider than most of the other design Eurocodes due to the diversity of steel structures, the need to cover both bolted and welded joints, and the possible slenderness of construction. The real differences when compared to existing British standards lie in bringing new methods into the scope. For example, the design of semi-rigid joints in buildings is explained, and more advanced methods of design for cold-formed steelwork are included. The rules for shell and for the design of piles, sheet piling and silos are new, and rules for stainless steel appear for the first time. The following National codes are affected and will be withdrawn by March 2010: • BS 4076:1989 Specification for steel chimneys • BS 5950 Series: Structural use of steelwork in building • BS 5400 Series: Steel, concrete and composite bridges • BS 8100 Series: Lattice towers and masts For more information about the standards in the Eurocode 3 Series visit: www.bsigroup.com/Eurocode3 BS EN 1993-1-1:2005 Eurocode 3 Design of steel structures. General rules and rules for buildings BS EN 1993-1-1 gives basic design rules for steel structures with material thicknesses of 3mm. It also gives supplementary provisions for the structural design of steel buildings. BS EN 1993-1-1:2005 supersedes: DD ENV 1993-1-1:1992 Eurocode 3. Design of steel structures. General rules and rules for buildings, which will be withdrawn.



BS EN 1993-1-2:2005 Eurocode 3. Design of steel structures. General rules. Structural fire design BS EN 1993-1-2 describes the principles, requirements and rules for the structural design of steel buildings exposed to fire, including the following aspects: • Design of steel structures for accidental exposure to fire • Passive methods of fire protection • Applies to steel structures that are required to fulfil this load bearing function, avoiding premature collapse due to fire • Gives principles and application rules for designing structures for specified requirements in respect of the load bearing function and the levels of performance. BS EN 1993-1-2:2005 supersedes: DD ENV 1993-1-2:2001 Eurocode 3. Design of steel structures. General rules. Structural fire design, which is withdrawn.

BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting BS EN 1993-1-3 gives design requirements for cold-formed thin gauge members and sheeting. It applies to cold-formed steel products made from coated or uncoated thin gauge hot or cold rolled sheet or strip, that have been cold-formed by such processes as cold-rolled forming or press-braking. BS EN 1993-1-3 may also be used for the design of profiled steel sheeting for composite steel and concrete slabs at the construction stage – see BS EN 1994. • A4 Loose-leaf/PDF • 134 pages • Published by BSI • ISBN 0 580 49665 1 • BSI order ref BS EN 1993-1-3:2006 Price £218*, Member Price £109

BS EN 1993-1-4:2006 Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels BS EN 1993-1-4 gives supplementary provisions for the design of buildings and civil engineering works that extend and modify the application of BS EN 1993-1-1, BS EN 1993-1-3, BS EN 1993-1-5 and BS EN 1993-1-8 to austenitic, austeniticferritic and ferritic stainless steels.

• A4 Loose-leaf/PDF • 38 pages • Published by BSI • ISBN 0 580 49666 X • BSI order ref BS EN 1993-1-4:2006 Price £138*, Member Price £69



8




Eurocode 3 Series Design of steel structures BS EN 1993-1-5:2006 Eurocode 3. Design of steel structures. Plated structural elements BS EN 1993-1-5 gives design requirements of stiffened and unstiffened plates which are subject to inplane forces. Effects due to shear lag, in-plane load introduction and plate buckling for I-section girders and box girders are covered. Also covered are plated structural components subject to in-plane loads as in tanks and silos. The effects of out-of-plane loading are outside the scope of this document.

BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures. Design of joints BS EN 1993-1-8 gives design methods for the design of joints subject to predominantly static loading using steel grades S235, S275, S355 and S460. BS EN 1993-1-8:2005 partially supersedes: DD ENV 1993-1-1:1992 Eurocode 3. Design of steel structures. General rules and rules for buildings.







BS EN 1993-1-6:2007 Eurocode 3. Design of steel structures. Strength and stability of shell structures BS EN 1993-1-6 gives basic design rules for plated steel structures that have the form of a shell of revolution. It defines the characteristic and design values of the resistance of the structure and is concerned with the requirements for design against the ultimate limit states of plastic limit; cyclic plasticity; buckling and fatigue.

• Published by BSI • 98 pages • A4 Loose-leaf/PDF • ISBN 978 0 580 50669 7 • BSI order ref BS EN 1993-1-6:2007 Price £180*, Member Price £90

A National Annex is not currently planned for BS EN 1993-1-6:2007. All recommended values may be accepted.

BS EN 1993-1-7:2007 Eurocode 3. Design of steel structures. Plated structures subject to out of plane loading BS EN 1993-1-7 provides basic design rules for the structural design of unstiffened and stiffened plates which form part of plated structures such as silos, tanks or containers that are loaded by out of plane actions.

BS EN 1993-1-9:2005 Eurocode 3. Design of steel structures. Fatigue BS EN 1993-1-9 gives methods for the assessment of fatigue resistance of members, connections and joints subjected to fatigue loading. The assessment methods given in this part are applicable to all grades of structural steels, stainless steels and unprotected weathering steels except where noted otherwise in the detail category tables. This part only applies to materials which conform to the toughness requirements of BS EN 1993-1-10. BS EN 1993-1-9:2005 partially supersedes: DD ENV 1993-1-1:1992 Eurocode 3. Design of steel structures. General rules and rules for buildings. • A4 Loose-leaf/PDF • 140 pages • Published by BSI • ISBN 0 580 46079 7 • BSI order ref BS EN 1993-1-9:2005 Price £138*, Member Price £69


PD 6695-1-9:2008 Recommendations for the design of structures to BS EN 1993-1-9 • A4 Loose-leaf/PDF • 26 pages • Published by BSI • ISBN 978 0 580 57643 0 • BSI order ref PD 6695-1-9:2008 Price £114*, Member Price £57

• A4 Loose-leaf/PDF • 40 pages • Published by BSI • ISBN 978 0 580 53282 5 • BSI order ref BS EN 1993-1-7:2007 Price £138*, Member Price £69

A National Annex is not currently planned for BS EN 1993-1-7:2007. All recommended values may be accepted.



9


Eurocode 3 Series Design of steel structures BS EN 1993-1-10:2005 Eurocode 3. Design of steel structures. Material toughness and through-thickness properties BS EN 1993-1-10 contains design guidance for the selection of steel for fracture toughness and for through thickness properties of welded elements where there is a significant risk of lamellar tearing during fabrication.



BS EN 1993-1-11:2006 Eurocode 3. Design of steel structures. Design of structures with tension components BS EN 1993-1-11 gives design rules for structures with tension components made of steel, which, due to their connections with the structure, are adjustable and replaceable. BS EN 1993-1-11 also gives rules for determining the technical requirements for prefabricated tension components for assessing their safety, serviceability and durability.



BS EN 1993-1-12:2007 Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700 BS EN 1993-1-12 specifies rules that can be used in conjunction with all parts of the Eurocode 3 series to enable structures to be designed with steel grades greater than S460 up to S700. • 12 pages • Published by BSI • ISBN 978 0 580 50670 3 • BSI order ref BS EN 1993-1-12:2007 Price £68*, Member Price £34


10


BS EN 1993-2:2006 Eurocode 3. Design of steel structures. Steel bridges BS EN 1993-2 describes the principles and application rules for the safety and serviceability and durability of steel bridges. It gives design rules that are supplementary to the generic rules in EN 1993-1-1 and is intended to be used with Eurocodes BS EN 1990, BS EN 1991 and part 2 of BS EN 1992 to BS EN 1998 when steel structures or steel components for bridges are referred to. • A4 Loose-leaf/PDF • 106 pages • Published by BSI • ISBN 0 580 49664 3 • BSI order ref BS EN 1993-2:2006 Price £190*, Member Price £95


BS EN 1993-3-1:2006 Eurocode 3. Design of steel structures. Towers, masts and chimneys. Towers and masts BS EN 1993-3-1 applies to the structural design of lattice towers and guyed masts and to the structural design of this type of structures supporting prismatic, cylindrical or other bluff elements. The provisions in BS EN 1993-3-1 supplement those given in BS EN 1993-1. • A4 Loose-leaf/PDF • 82 pages • Published by BSI • ISBN 978 0 580 54892 5 • BSI order ref BS EN 1993-3-1:2006 Price £170*, Member Price £85

BS EN 1993-3-2:2006 Eurocode 3. Design of steel structures. Towers, masts and chimneys. Chimneys BS EN 1993-3-2 applies to the structural design of vertical steel chimneys of circular or conical section. It covers chimneys that are cantilevered, supported at intermediate levels or guyed. The provisions in BS EN 1993-3-2 supplement those given in BS EN 1993-1-1. BS EN 1993-3-2 is concerned only with the requirement for resistance (strength, stability and fatigue) of steel chimneys. • A4 Loose-leaf/PDF • 34 pages • Published by BSI • ISBN 978 0 580 54894 9 • BSI order ref BS EN 1993-3-2:2006 Price £130*, Member Price £65

BS EN 1090-2:2008 Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures BS EN 1090-2 specifies requirements for execution of steel structures, to ensure adequate levels of mechanical resistance and stability, serviceability and durability. This standard specifies requirements for execution of steel structures in particular those that are designed according to all parts of BS EN 1993 and the steel parts of composite steel and concrete structures designed according to all parts of BS EN 1994. • A4 Loose-leaf/PDF • 208 pages Price £228*, Member Price £114

• ISBN 978 0 580 55315 8



Eurocode 3 Series Design of steel structures PD 6695-2:2008 Recommendations for the design of bridges to BS EN 1993 Published Document (PD) 6695-2 contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1993-2, BS EN 1993-1-5, BS EN 1993-1-7, BS EN 1993-1-8 and their UK National Annexes in the design of components of steel bridges. This document only covers bridges that are executed in accordance with BS EN 1090-2.

• A4 Loose-leaf/PDF • 94 pages Price £170*, Member Price £85

• ISBN 978 0 580 61135 3

BS EN 1993-4-1:2007 Eurocode 3. Design of steel structures. Silos BS EN 1993-4-1 provides principles and application rules for the structural design of steel silos of circular or rectangular planform, being free standing or supported. • A4 Loose-leaf/PDF • 118 pages • Published by BSI • ISBN 978 0 580 50673 4 • BSI order ref BS EN 1993-4-1:2007 Price £190*, Member Price £95

BS EN 1993-4-2:2007 Eurocode 3. Design of steel structures. Tanks BS EN 1993-4-2 provides principles and application rules for the structural design of vertical cylindrical above ground steel tanks for the storage of liquid products with the following characteristics: • Internal pressures above liquid level not less than 100mbar and not more than 500mbar • Design metal temperature in the range of -50 ºC to +300 ºC. For tanks constructed using austenitic stainless steels, the design metal temperature may be in the range of -165 ºC to +300 ºC. for fatigue loaded tanks, the temperature should be limited to T < 150 ºC • Maximum design liquid level not higher than the top of the cylindrical shell. • A4 Loose-leaf/PDF • 58 pages • Published by BSI • ISBN 978 0 580 50672 7 • BSI order ref BS EN 1993-4-2:2007 Price £168*, Member Price £84

BS EN 1993-4-3:2007 Eurocode 3. Design of steel structures. Pipelines BS EN 1993-4-3 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. • A4 Loose-leaf/PDF • 44 pages • Published by BSI • ISBN 978 0 580 50671 0 • BSI order ref BS EN 1993-4-3:2007 Price £138*, Member Price £69

BS EN 1993-5:2007 Eurocode 3. Design of steel structures. Piling BS EN 1993-5 provides principles and application rules for the structural design of bearing piles and sheet piles made of steel as well as examples of detailing for foundation and retaining wall structures. • A4 Loose-leaf/PDF • 98 pages • Published by BSI • ISBN 978 0 580 50601 7 • BSI order ref BS EN 1993-5:2007 Price £180*, Member Price £90

BS EN 1993-6:2007 Eurocode 3. Design of steel structures. Crane supporting structures BS EN 1993-6 gives design rules for the structural design of runway beams and other crane supporting structures. It covers overhead crane runway inside buildings and outdoor crane runways, including runways for: a) Overhead travelling cranes, either: • supported on top of the runway beams • underslung below the runway beams b) Monorail hoist blocks. • A4 Loose-leaf/PDF • 40 pages • Published by BSI • ISBN 978 0 580 53283 2 • BSI order ref BS EN 1993-6:2007 Price £138*, Member Price £69

A National Annex document is not required for BS EN 1993-4-2:2007. All recommended values may be accepted.

Publications yet to be published in the Eurocode 3 Series: Design of steel structures UK National Annex to BS EN 1993-1-3:2006 Supplementary rules for cold-formed members and sheeting

UK National Annex to BS EN 1993-3-2:2007 Towers, masts and chimneys. Chimneys

UK National Annex to BS EN 1993-1-4:2006 Supplementary rules for stainless steels

UK National Annex to BS EN 1993-4-1:2007 Design of steel structures. Silos

UK National Annex to BS EN 1993-1-5:2006 Plated structural elements

UK National Annex to BS EN 1993-4-2:2007 Design of steel structures. Tanks

UK National Annex to BS EN 1993-1-10 Material toughness and through thickness-properties

UK National Annex to BS EN 1993-4-3:2007 Design of steel structures. Pipelines

PD 6695-1-10 Background paper to the UK National Annex to BS EN 1993-1-10 UK National Annex to BS EN 1993-2:2006 Steel bridges

UK National Annex to BS EN 1993-5:2007 Piling PD 6695-5 Background paper to the UK National Annex to BS EN 1993-5 UK National Annex to BS EN 1993-6:2007 Crane supporting structures

PD 6695-2 Recommendations for the design of structures to BS EN 1993-2 UK National Annex to BS EN 1993-3-1:2007 Towers, masts and chimneys. Towers and masts

For an up-to-date publication schedule visit: www.bsigroup.com/Eurocodesschedule * P&P £5.95 (inclusive of VAT); £9.95 Rest of the World (+VAT if applicable) – one-off charge added to your order of 10 items or fewer. FREE P&P to BSI Subscribing Members. Pre-payment is required by non-Members. VAT is applicable to all eShop purchases and downloads, CDs, DVDs and other electronic products. All prices, content and publishing dates may be subject to change.


11


Eurocode 4 Series Design of composite steel and concrete structures Eurocode 4 Design of composite steel and concrete structures applies to the design of composite structures and members for buildings and civil engineering works. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that is given in BS EN 1990:2002. For more information about the standards in the Eurocode 4 Series visit: www.bsigroup.com/Eurocode4 BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings BS EN 1994-1-1 describes the principles and requirements for safety, serviceability and durability of composite steel and concrete structures, together with specific provisions for buildings. It is based on the limit state concept used in conjunction with a partial factor method. This standard supersedes DD ENV 1994-1-1:1994. It will also replace BS 5950-3-1:1990 and BS 5950-4:1994 in due course. • A4 Loose-leaf/PDF • 122 pages • Published by BSI • ISBN 0 580 45569 6 • BSI order ref BS EN 1994-1-1:2004 Price £206*, Member Price £103


BS EN 1994-1-2:2005 Eurocode 4. Design of composite steel and concrete structures. General rules. Structural fire design BS EN 1994-1-2 describes the principles, requirements and rules for the structural design of buildings exposed to fire, including the following aspects: • Safety requirements • Design procedures • Design aids. Please note this part only identifies differences from, or supplements to, normal temperature design. BS EN 1994-1-1:2002 supersedes ENV 1994-1-2: 1994.

BS EN 1994-2:2005 Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges BS EN 1994-2 describes the principles and requirements for safety, serviceability and durability of composite steel and concrete structures, together with specific provisions for bridges. It is based on the limit state concept used in conjunction with a partial factor method. BS EN 1994-2 contains the general rules from BS EN 1994-1-1 and specific rules for the design of composite steel and concrete bridges or composite members of bridges. BS EN 1994-1-2:2005 supersedes DD ENV 1994-2:2001. • A4 Loose-leaf/PDF • 96 pages • Published by BSI • ISBN 0 580 46902 6 • BSI order ref BS EN 1994-2:2005 Price £180*, Member Price £90

UK National Annex to BS EN 1994-2:2005 • A4 Loose-leaf/PDF • 8 Pages • Published by BSI • ISBN 978 0 580 54983 0 • BSI order ref NA to BS EN 1994-2:2005 Price £40*, Member Price £20

PD 6696-2:2007 Background paper to BS EN 1994-2 and the UK National Annex to BS EN 1994-2. Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges • A4 Loose-leaf/PDF • Published by BSI • BSI order ref PD 6696-2:2007 Price £68*, Member Price £34

• 14 Pages • ISBN 0 580 46902 6



12


Industry news See the latest industry news stories at




Eurocode 5 Series Design of timber structures Eurocode 5 Design of timber structures applies to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural products) or wood-based panels jointed together with adhesives or mechanical fasteners. It complies with the principles and requirements for the safety and serviceability of structures and the basis of design and verification given in BS EN 1990:2002. It covers the requirements for mechanical resistance, serviceability, durability and fire resistance of timber structures. The following National codes are affected and will be withdrawn by March 2010: • BS 5268-2:2002 Structural use of timber. Code of practice for permissible stress design, materials and workmanship • BS 5268-3:2006 Structural use of timber. Code of practice for trussed rafter roofs • BS 5268-4 Series: Structural use of timber • BS 5268-6 Series: Structural use of timber • BS 5268-7 Series: Structural use of timber For more information about the standards in the Eurocode 5 Series visit: www.bsigroup.com/Eurocode5 BS EN 1995-1-1:2004 Eurocode 5. Design of timber structures. Common rules and rules for buildings BS EN 1995-1-1 applies to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural products, e.g. LVL) or wood-based panels jointed together with adhesives or mechanical fasteners. It complies with the principles and requirements for the safety and serviceability of structures and the basis of design and verification given in EN 1990:2002. BS EN 1995-1-1:2004 supersedes: DD ENV 1995-1-1:1994 Eurocode 5. Design of timber structures. General rules and rules for buildings, which is withdrawn. • A4 Loose-leaf/PDF • 128 pages • Published by BSI • ISBN 0 580 45147 X • BSI order ref BS EN 1995-1-1:2004 Price £206*, Member Price £103

UK National Annex to BS EN 1995-1-1:2004 • A4 Loose-leaf/PDF • 12 pages • Published by BSI • ISBN 0 580 49349 0 • BSI order ref NA For BS EN 1995-1-1:2004 Price £68*, Member Price £34

BS EN 1995-2:2004 Eurocode 5. Design of timber structures. Bridges BS EN 1995-2 gives general design rules for the structural parts of bridges, i.e. structural members of importance for the reliability of the whole bridge or major parts of it, made of timber or other wood-based materials, either singly or compositely with concrete, steel or other materials. BS EN 1995-2 covers the following subjects: • Basis of design • Material properties • Durability Section 5: Basis of structural analysis • Ultimate limit states • Serviceability limit states connections, and structural detailing and control. • A4 Loose-leaf/PDF • 32 pages • Published by BSI • ISBN 0 580 40149 6 • BSI order ref BS EN 1995-2:2004 Price £120*, Member Price £60

UK National Annex to BS EN 1995-2:2004 • A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 0 580 49351 2 • BSI order ref BS EN 1995-2:2004 Price £40*, Member Price £20

BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures. General. Structural fire design BS EN 1995-1-2 applies to the design of buildings and civil engineering works in timber (solid timber, sawn, planed or in pole form, glued laminated timber or wood-based structural products e.g. LVL) or wood-based panels jointed together with adhesives or mechanical fasteners. BS EN 1995-1-2:2004 supersedes: DD ENV 1995-1-2:2002, which is withdrawn. It will also replace BS 5268-4.1:1978 and BS 5268-4.2:1990 in due course. • A4 Loose-leaf/PDF • 76 pages • Published by BSI • ISBN 0 580 45148 8 • BSI order ref BS EN 1995-1-2:2004 Price £180*, Member Price £90

FREE DOWNLOAD Construction brochure Download the latest Construction and built environment brochure at





13


Eurocode 6 Series Design of masonry structures Eurocode 6 Design of masonry structures relates to buildings and other civil engineering works, and covers reinforced, prestressed and confined masonry. The four parts cover the rules for reinforced and unreinforced masonry, structural fire design and detailed rules for lateral loading. They code deals with specific aspects of passive fire protection in terms of designing structures and parts for adequate load bearing resistance that could be needed for safe evacuation of occupants and fire rescue and for limiting fire spread. This Eurocode also applies to the design of buildings and civil engineering works, or parts in unreinforced, reinforced, prestressed and confined masonry. It outlines the requirements for resistance, serviceability and durability of structures. The following National codes are affected and will • BS 5628-1:2005 Code of practice for the use of • BS 5628-2:2005 Code of practice for the use of • BS 5628-3:2005 Code of practice for the use of

be withdrawn by March 2010: masonry. Structural use of unreinforced masonry masonry. Structural use of reinforced and prestrssed masonry masonry. Materials and components, design and workmanship

For more information about the standards in the Eurocode 6 Series visit: www.bsigroup.com/Eurocode6 BS EN 1996-1-1:2005 Eurocode 6. Design of masonry structures. General rules for reinforced and unreinforced masonry structures BS EN 1996-1-1 deals with unreinforced masonry and reinforced masonry where the reinforcement is added to provide ductility, strength or improve serviceability. The principles of the design of prestressed masonry and confined masonry are given, but application rules are not provided. BS EN 1996-1-1:2005 supersedes: DD ENV 1996-1-1:1995 Eurocode 6. Design of masonry structures. General rules for buildings. General rules for buildings. Rules for reinforced and unreinforced masonry. DD ENV 1996-1-3:1998 Eurocode 6. Design of masonry structures. General rules for buildings. Detailed rules on lateral loading. Part 1-3: Detailed rules on lateral loading. • A4 Loose-leaf/PDF • 18 pages • Published by BSI • ISBN 0 580 46719 8 • BSI order ref BS EN 1996-1-1:2005 Price £206*, Member Price £103


BS EN 1996-2:2006 Eurocode 6. Design of masonry structures. Design considerations, selection of materials and execution of masonry BS EN 1996-2 gives basic rules for the selection of materials and execution of masonry to comply with the design assumptions of the other parts of Eurocode 6. With a few exceptions this standard deals with the ordinary aspects of masonry design and execution including: • The selection of masonry materials • Factors affecting the performance and durability of masonry • Resistance of buildings to moisture penetration • Storage, preparation and use of materials on site • The execution of masonry • Masonry protection during execution. BS EN 1996-2:2006 supersedes DD ENV 1996-2:1998 which is now withdrawn. • A4 Loose-leaf/PDF • 41 pages • Published by BSI • ISBN 0 580 47822 X • BSI order ref BS EN 1996-2:2006 Price £138*, Member Price £69


BS EN 1996-1-2:2005 Eurocode 6. Design of masonry structures. General rules. Structural fire design BS EN 1996-1-2 deals with the design of masonry structures for the accidental situation of fire exposure and is intended to be used in conjunction with other relevant Eurocodes. This part only identifies differences from, or supplements to, normal temperature design. BS EN 1996-1-2:2005 replaces DD ENV 1996-1-2:1995 which is withdrawn, it will also replace BS 5628-3:2001, Code of practice for use of masonry. Materials and components, design and workmanship, which will be withdrawn on a date to be announced.

Conferences See the latest conferences we offer at

www.bsigroup.com/conferences



14




Eurocode 6 Series Design of masonry structures BS EN 1996-3:2006 Eurocode 6. Design of masonry structures. Simplified calculation methods and simple rules for masonry structures BS EN 1996-3 provides simplified calculation methods to facilitate the design of the following unreinforced masonry walls, subject to certain conditions of application: • Walls subjected to vertical loading and wind loading • Walls subjected to concentrated loads • Shear walls • Basement walls subjected to lateral earth pressure and vertical loads • Walls subjected to lateral loads but not subjected to vertical loads. BS EN 1996-3:2006 does not cover the design for accidental situations.


Industry news See the latest industry news stories at

www.bsigroup.com/constructionstandards • A4 Loose-leaf/PDF • 46 pages • Published by BSI • ISBN 0 580 47821 1 • BSI order ref BS EN 1996-3:2006 Price £158*, Member Price £79

Eurocode 7 Series Geotechnical design Eurocode 7 Geotechnical design is applicable to the geotechnical aspects of the design of buildings and civil engineering works. It is concerned with the requirements for strength, stability, serviceability and durability of structures. These standards should be used in conjunction with BS EN 1990:2002. For more information about the standards in the Eurocode 7 Series visit: www.bsigroup.com/Eurocode7 BS EN 1997-1:2004 Geotechnical design. General rules BS EN 1997 applies to the geotechnical aspects of the design of buildings and civil engineering works. It is concerned with the requirements for strength, stability, serviceability and durability of structures. It covers the following topics: • Basis of geotechnical design • Geotechnical data • Supervision of construction, monitoring and maintenance • Fill, dewatering, ground improvement and reinforcement • Spread foundations • Pile foundations • Anchorages • Retaining structures. • A4 Loose-leaf/PDF • 172 pages • Published by BSI • ISBN 0 580 45212 3 • BSI order ref BS EN 1997-1:2004 Price £228*, Member Price £114

BS EN 1997-2:2007 Eurocode 7. Geotechnical design. Ground investigation and testing BS EN 1997-2 gives guidance for the planning and interpretation of geotechnical laboratory and field tests that are used for the support of geotechnical design of buildings and civil engineering works. BS EN 1997-2 covers the following topics: • Planning of ground investigations • Soil and rock sampling and groundwater measurements • Field tests in soil and rock • Laboratory tests on soil and rock. • A4 Loose-leaf/PDF • 202 pages • Published by BSI • ISBN 978 0 580 50569 0 • BSI order ref BS EN 1997-2:2007 Price £228*, Member Price £114


Publications yet to be published in the Eurocode 7 Series: Geotechnical design PD 6694-1. Recommendations for the design of structures subject to traffic loading to BS EN 1997-1:2004 UK National Annex to BS EN 1997-2:2004 Ground investigation and testing




15


Eurocode 8 Series Design of structures for earthquake resistance Eurocode 8 Design of structures applies to the design and construction of buildings and civil engineering works in seismic regions. Its purpose is to ensure that in the event of earthquakes: • Human lives are protected; • Damage is limited; and • Structures important to civil protection remain operational. It is unlikely that BS EN 1998 needs to be used in the UK, except for special structures – e.g. nuclear structures, long span bridges and tall buildings. For more information about the standards in the Eurocode 8 Series visit: www.bsigroup.com/Eurocode8

BS EN 1998-1:2004 Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings BS EN 1998-1 applies to the design of buildings and civil engineering works in seismic regions. BS EN 1998-1 deals with: • Basic performance requirements and compliance criteria applicable to buildings and civil engineering works in seismic regions • Rules for the representation of seismic actions and for their combination with other actions • Fundamental requirements and other relevant aspects of design and safety related to base isolation of structures and specifically to base isolation of buildings • General design rules relevant specifically to buildings. Contain specific rules for various structural materials and elements, relevant specifically to buildings as follows: - concrete - steel - composite steel-concrete - timber - masonry BS EN 1998-1:2004 supersedes DD ENV 1998-1-1:1996, DD ENV 1998-1-2:1996, DD ENV 1998-1-3:1996 which are withdrawn. • A4 Loose-leaf/PDF • 232 pages • Published by BSI • ISBN 0 580 45872 5 • BSI order ref BS EN 1998-1:2004 Price £248*, Member Price £124


BS EN 1998-2:2005 Eurocode 8. Design of structures for earthquake resistance. Bridges BS EN 1998-2 primarily covers the seismic design of bridges in which the horizontal seismic actions are mainly resisted through bending of the piers or at the abutments; i.e. of bridges composed of vertical or nearly vertical pier systems supporting the traffic deck superstructure. It is also applicable to the seismic design of cable-stayed and arched bridges, although its provisions should not be considered as fully covering these cases. BS EN 1998-2:2005 covers the following topics: • Basic requirements and compliance criteria • Seismic action • Analysis • Strength verification • Detailing. This standard supersedes DD ENV 1998-2:1996. • A4 Loose-leaf/PDF • 152 pages • Published by BSI • ISBN 0 580 46967 0 • BSI order ref BS EN 1998-2:2005 Price £228*, Member Price £114

BS EN 1998-3:2005 Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings Although assessment and retrofitting of existing structures for non-seismic actions is not yet covered by the relevant materialdependent Eurocodes, BS EN 1998-3 was specifically developed because: • For many older structures, seismic resistance was not considered during the original construction, whereas non-seismic actions were catered for, at least by means of traditional construction rules • Seismic hazard evaluations in accordance with present knowledge may indicate the need for retrofitting campaigns • Damage caused by earthquakes may create the need for major repairs. BS EN 1998-3:2005 supersedes DD ENV 1998-1-4:1996. • A4 Loose-leaf/PDF • 94 pages • Published by BSI • ISBN 0 580 46615 9 • BSI order ref BS EN 1998-3:2005 Price £180*, Member Price £90

16




Eurocode 8 Series Design of structures for earthquake resistance BS EN 1998-4:2006 Eurocode 8. Design of structures for earthquake resistance. Silos, tanks and pipelines BS EN 1998-4 specifies principles and application rules for the seismic design of the structural aspects of facilities composed of above-ground and buried pipeline systems and of storage tanks of different types and uses, as well as for independent items, such as single water towers serving a specific purpose, or groups of silos enclosing granular materials, etc. BS EN 1998-4 includes the additional criteria and rules required for the seismic design of these structures without restrictions on their size, structural types and other functional characteristics. For some types of tanks and silos, it also provides detailed methods of assessment and verification rules. BS EN 1998-4:2006 replaces DD ENV 1998-4:1999. • A4 Loose-leaf/PDF • 84 pages • Published by BSI • ISBN 0 580 49272 9 • BSI order ref BS EN 1998-4:2006 Price £180*, Member Price £90


BS EN 1998-6:2005 Eurocode 8. Design of structures for earthquake resistance. Towers, masts and chimneys BS EN 1998-6 establishes requirements, criteria and rules for the design of tall slender structures such as towers; including belltowers, intake towers, radio and TV-towers; masts; industrial chimneys and lighthouses. Requirements are also given for non-structural elements, such as the lining material of industrial chimneys, antennae and other equipment. • A4 Loose-leaf/PDF • 52 pages • Published by BSI • ISBN 0 580 46614 0 • BSI order ref BS EN 1998-6:2005 Price £168*, Member Price £84


• A4 Loose-leaf/PDF • 10 pages • Published by BSI • ISBN 978 0 580 55092 8 • BSI order ref NA to BS EN 1998-4:2006 Price £40*, Member Price £20

BS EN 1998-5:2004 Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects BS EN 1998-5 establishes the requirements, criteria, and rules for the siting and foundation soil of structures for earthquake resistance. It covers the design of different foundation systems, the design of earth retaining structures and soil-structure interaction under seismic actions. As such it complements Eurocode 7 which does not cover the special requirements of seismic design. The provisions of Part 5 apply to buildings (BS EN 1998-1), bridges (BS EN 1998-2), towers, masts and chimneys (BS EN 1998-6), silos, tanks and pipelines (BS EN 1998-4). BS EN 1998-5 also contains empirical charts for simplified evaluation of liquefaction potential and gives a simplified procedure for seismic analysis of retaining structures. BS EN 1998-4:2004 supersedes DD ENV 1998-5:1994.

FREE DOWNLOAD BSI Structural Eurocodes Companion This essential guide contains articles from leading academics and professionals to help you gain an understanding of the nature of the new codes. It will ease your integration into the new approach.

Download your free copy at www.bsigroup.com/bip2159



Publications yet to be published in the Eurocode 8 Series: Design of structures UK National Annex to BS EN 1998-2:2005 Bridges

PD 6698 Background paper to the UK National Annexes to BS EN 1998-1, 1998-2, 1998-4, 1998-5 and 1998-6




17


Eurocode 9 Series Design of aluminium structures Eurocode 9 Design of aluminium structures applies to the design of buildings and civil engineering and structural works in aluminium. The series is concerned with requirements for resistance, serviceability, durability and fire resistance of aluminium structures. Other requirements, such as thermal or sound insulation, are not concerned. For more information about the standards in the Eurocode 9 Series visit: www.bsigroup.com/Eurocode9 BS EN 1999-1-1:2007 Eurocode 9. Design of aluminium structures. General structural rules BS EN 1999-1-1 gives the basic design rules for structures made of wrought aluminium alloys and limited guidance for cast alloys. • A4 Loose-leaf/PDF • 210 pages • Published by BSI • ISBN 978 0 580 50415 0 • BSI order ref BS EN 1999-1-1:2007 Price £228*, Member Price £114


BS EN 1999-1-2:2007 Eurocode 9. Design of aluminium structures. Structural fire design BS EN 1999-1-2 describes the principles, requirements and rules for the structural design of buildings exposed to fire, including safety requirements. This standard applies to aluminium structures required to fulfil load bearing functions and only deals with passive methods of fire protection.



BS EN 1999-1-3:2007 Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue BS EN 1999-1-3 describes the principles, requirements and rules for the structural design of aluminium components and structures subjected to fatigue actions and gives rules for: • Same life design • Damage tolerant design • Design assisted by testing.

• A4 Loose-leaf/PDF • 100 pages • Published by BSI • ISBN 978 0 580 50929 2 • BSI order ref BS EN 1999-1-3:2007 Price £180*, Member Price £90


18


BS EN 1999-1-4:2007 Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting BS EN 1999-1-4 gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot-rolled or cold-rolled sheet or strip that have been cold-formed by such processes as coldrolled forming or press-breaking. Methods are also included for stressed-skin design using aluminium sheeting as a structural diaphragm. • A4 Loose-leaf/PDF • 68 pages • Published by BSI • ISBN 978 0 580 50416 7 • BSI order ref BS EN 1999-1-4:2007 Price £168*, Member Price £84


BS EN 1999-1-5:2007 Eurocode 9. Design of aluminium structures. Shell structures BS EN 1999-1-5 applies to the structural design of aluminium structures, stiffened and unstiffened, that have the form of a shell of revolution or of a round panel in monocoque structures. The provisions in the standard apply to axisymmetric shells (cylinders, cones, spheres) and associated circular or annual plates and beam section rings and stringer stiffeners where they form part of the complete structure. • A4 Loose-leaf/PDF • 70 pages • Published by BSI • ISBN 978 0 580 50414 3 • BSI order ref BS EN 1999-1-5:2007 Price £168*, Member Price £84


BS EN 1090-3:2008 Execution of steel structures and aluminium structures. Technical requirements for aluminium structures BS EN 1090-3 is the third part of the BS EN 1090 series of standards. It specifies requirements for the execution of aluminium structures, to ensure adequate levels of mechanical resistance and stability, serviceability and durability. It also specifies requirements for the execution of aluminium structures in particular those that are designed according to BS EN 1999-1-1, BS EN 1999-1-2, BS EN 1999-1-3, BS EN 1999-1-4 and BS EN 1999-1-5. • A4 Loose-leaf/PDF • 116 pages • ISBN 978 0 580 55320 2 Price £180*, Member Price £90

• Published by BSI



British Standards Online (BSOL)

Conferences

British Standards Online (BSOL) is BSI’s flagship database of standards. Used by professionals around the world, it is the most comprehensive and authoritative source of British, and adopted European and international, standards.

Our conferences bring together key players to debate latest trends, regulations and issues, with opportunities for delegates to take part in open discussions and debates led by panels of expert speakers. These conferences are often accompanied by relevant workshops which go into detail on particular topics in a practical learning environment.

From an international perspective, access to the European Union through British Standards Online is your organization’s gateway to Europe. Compliance to legislation such as New Approach Directives and single point access to the official English version of harmonized standards, means you can trade more effectively in those markets, as your products meet the relevant requirements.

See the latest conferences we offer at

www.bsigroup.com/conferences

Industry news

BSOL is the authoritative collection of standards, and using standards can help you and your organization to: • Improve your products or services • Reduce costs • Attract new customers • Increase your competitive edge • Inspire trust and confidence • Improve quality and performance lessening the likelihood of mistakes • Make products compatible • Encourage international trade.

See the latest industry news stories at


Construction related modules include: • • • •

Construction in General (GBM48) Building Materials & Inspection (GBM49) Building Installations & Finishing (GBM50) Civil Engineering (GBM51)

Sign up to free e-Newsletters

www.bsigroup.com/bsol

Construction brochure Download the latest Construction and built environment brochure at


To keep up-to-date with the latest developments in construction and Eurocodes, sign up to receive our sector-specific newsletters at

www.bsigroup.com/newsletters


How to buy online… 1

Visit our online shop at www.bsigroup.com/shop and type in a keyword or a standard number/title into the search box.

2

Click on the publication you require in the search results

3

Add the publication to your basket

4

Continue shopping or if you are ready to finish shopping, click on ‘checkout’

5

Log in or register to buy online

6

Follow the payment instructions

7

Download your standard or wait for the hard copy to deliver

…it’s that easy!

BSI Membership Standards are recognized as a powerful business tool and can define crucial aspects of a company's safety, quality and reliability. They also enable businesses to operate in a global market.

BSI Membership gives you access to an exclusive range of services aimed at helping your business to prosper in an increasingly competitive marketplace.

Services and benefits include: • 50% off British standards

• Free subscription to Update Standards and Business Standards magazines

• 50% off the subscription of our flagship database product, British Standards Online (BSOL)

• Free entry in BSI's searchable online Member Directory

• Free P&P and credit facilities

• Access to PLUS (Private List Updating Service) • And much more

To find out more call +44 (0)20 8996 7002 or visit

www.bsimembers.com

Please quote marketing reference BR-EURO-09 when placing your order.

BSI Group Headquarters 389 Chiswick High Road London W4 4AL UK Tel +44 (0)20 8996 9000 Fax +44 (0)20 8996 7400 www.bsigroup.com © BSI copyright 02/09

FSC Logo Printed responsibly using vegetable-oil based inks on 100% recycled paper. Printed on FSC material under chain of custody conditions by an FSC certified printer. Please recycle after use.

Structural Design Eurocodes 2009

Recommend Documents