Scenario % (ackgrond The router Central )P cluster and the eb server are com3letel4 configured. 5ou have been tased 7ith creating a ne7 Pv& addressing scheme that 7ill accommodate & subnets using 1,2.16%.0.0/2& net7or. The T de3artment re8uires 2+ hosts. The )ales de3artment needs +0 hosts. The subnet for the rest of the staff re8uires 100 hosts. A uest subnet 7ill be added in the future to accommodate 2+ hosts. 5ou are also tased 7ith finishing the basic securit4 settings and interface configurations on R1. 'urthermore 4ou 7ill configure the )- interface and basic securit4 setting on s7itches )1 )2 and ).
Create subnets that meet the host re8uirements using 1,2.16%.0.0/2&. ο
)taff" 100 hosts
ο
)ales" +0 hosts
ο
T" 2+ hosts
ο
uest net7or to be added later" 2+ hosts
•
#ocument the assigned Pv& addresses in the Addressing Table.
•
Record the subnet for uest net7or"999999999999999999999999999
PC Configrations •
•
Configure the assigned Pv& address subnet mas and default gate7a4 settings on the )taff )ales and T PCs using 4our addressing scheme. Assign Pv6 unicast and lin local addresses and default gate7a4 to the )taff )ales and T net7ors according to the Addressing Table.
)1 Configrations •
Configure the device name according to the Addressing Table.
•
#isable #!) loou3.
•
Assign Ciscoenpa as the encr43ted 3rivileged (:(C mode 3ass7ord.
•
Assign Ciscoconpa as the console 3ass7ord and enable login.
•
Re8uire that a minimum of 10 characters be used for all 3ass7ords.
•
(ncr43t all 3lainte;t 3ass7ords.
•
Create a banner that 7arns an4one accessing the device that unauthori
•
Configure all the igabit (thernet interfaces.
•
ο
Configure the Pv& addresses according to 4our addressing scheme.
ο
Configure the Pv6 addresses according to the Addressing Table.
Configure ))> on R1" ο
)et the domain name to CC/A-lab0co+
ο
enerate a 1,4?bit R)A e4.
ο
Configure the -T5 lines for ))> access.
ο
@se the local user 3rofiles for authentication.
ο
Create a user Ad+in1 7ith a 3rivilege level of 1 using the encr43ted 3ass7ord for Ad+in1pa.
•
Configure the console and -T5 lines to log out after five minutes of inactivit4.
•
$loc an4one for three minutes 7ho fails to log in after four attem3ts 7ithin a t7o?minute 3eriod.
S#itch Configrations •
Configure the device name according to the Addressing Table.
•
Configure the )- interface 7ith the Pv& address and subnet mas according 4our addressing scheme.