1.C_HANAIMP_1

SAP C_HANAIMP_1

SAP Certified Application Associate - SAP HANA 1.0 Version: 5.0

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Topic 1, Volume A QUESTION NO: 1 Which of the following nodes can you use when you create a calculation view with the SAP HANA studio graphical interface? (Choose two) A. Data Foundation B. Aggregation C. Join D. Analytic Privilege Answer: B,C Explanation:

QUESTION NO: 2 When table replication is suspended, what does the SAP Landscape Transformation (SLT) server do? A. It prevents the RFC connection from reading the source system logging tables. B. It deletes the database triggers and the logging tables in the source system. C. It stops the RFC connection and deletes the target tables in SAP HANA. D. It keeps reading via the RFC connection from the source system but does not load the data into SAP HANA. Answer: A Explanation:

QUESTION NO: 3 Which of the following can be part of an analytic view? (Choose three) A. Query transformation B. Unions C. Logical joins D. Data foundation E. Attributes Answer: C,D,E Explanation: “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 2

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Topic 1, Volume A QUESTION NO: 1 Which of the following nodes can you use when you create a calculation view with the SAP HANA studio graphical interface? (Choose two) A. Data Foundation B. Aggregation C. Join D. Analytic Privilege Answer: B,C Explanation:

QUESTION NO: 2 When table replication is suspended, what does the SAP Landscape Transformation (SLT) server do? A. It prevents the RFC connection from reading the source system logging tables. B. It deletes the database triggers and the logging tables in the source system. C. It stops the RFC connection and deletes the target tables in SAP HANA. D. It keeps reading via the RFC connection from the source system but does not load the data into SAP HANA. Answer: A Explanation:

QUESTION NO: 3 Which of the following can be part of an analytic view? (Choose three) A. Query transformation B. Unions C. Logical joins D. Data foundation E. Attributes Answer: C,D,E Explanation: “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 2

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated

QUESTION NO: 4 Which tool do you use for real-time data provisioning into SAP HANA? A. SAP Landscape Transformation (SLT) B. SAP BusinessObjects Data Federation Administration C. SAP BusinessObjects Data Services D. SAP Direct Extractor Connection (DXC) Answer: A Explanation:

QUESTION NO: 5 You are experiencing performance problems with SAP BusinessObjects reports based on SAP HANA data. Which of the following can you do to increase performance? (Choose two) A. Add only relevant data to the report queries. B. Avoid aggregation and work on raw data. C. Merge all relevant data into a consolidated report. D. Use drill-down or linked reports. Answer: A,D Explanation:

QUESTION NO: 6 You have set up replication from SAP ERP using SAP Landscape Transformation (SLT). You notice that the information models do not show the latest data from ERP. What do you check to investigate this? (Choose two) A. Activation status of the information models B. Transaction SAP ERP Data Modeler (SD11) “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 3

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated C. Transaction LTR on SLT D. Data Provisioning view in SAP HANA studio Answer: C,D Explanation:

QUESTION NO: 7 You create a business layer in the SAP BusinessObjects Information Design Tool (IDT). Which of the following could you add to the data foundation? (Choose two) A. Packages B. Column Tables C. Synonyms D. Information Models Answer: B,D Explanation:

QUESTION NO: 8 You implemented SAP-delivered business content on SAP HANA. When you try to activate the business content the activation fails. What could be a reason for this? A. You have not created a calculation view to expose the data to the users. B. The data has not been loaded into SAP HANA memory yet. C. The schema mapping was not set up correctly. D. The import of business content was performed with the _SYS_REPO user. Answer: C Explanation:

QUESTION NO: 9 You want to allow another developer to access the information models in one of your packages. “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 4

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated What privilege do you have to assign to this user to allow access? A. SELECT on _SYS_REPO B. SELECT on _SYS_REPO with the grant option C. REPO.READ for the package D. REPO.MAINTAIN_NATIVE_PACKAGES for the package Answer: C Explanation:

QUESTION NO: 10 Which data provisioning method can you use to load data from SAP business content DataSources into SAP HANA? (Choose two) A. SAP Landscape Transformation (SLT) B. SAP Landscape Directory (SLD) C. SAP Direct Extractor Connection (DXC) D. SAP BusinessObjects Data Services Answer: C,D Explanation:

QUESTION NO: 11 Your customer requires real-time replication. Where do you select the tables to be replicated to SAP HANA? A. in transaction LTR in SAP Landscape Transformation (SLT) B. in the Import dialog of the Quick Launch of SAP HANA studio C. in transaction SAP ERP Tables and Indexes Monitor (DB02) D. in the Data Provisioning dialog of SAP HANA studio Answer: D Explanation:

“Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 5

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 12 Which of the following can you use as a source for a graphical calculation view? (Choose three) A. Calculation view B. SQL view C. Decision table D. Table E. Procedure Answer: A,C,D Explanation:

QUESTION NO: 13 Which of the following can you check to investigate the query time in SAP HANA? (Choose three) A. The SQL plan cache B. The Central Management Console C. The expensive statements trace D. The statistics server warning for long running statements E. The System information tab of the Administration console Answer: A,C,D Explanation:

QUESTION NO: 14 You create a role with the following command: CREATE ROLE "InfoUser" When you try to assign this role to user PETER with the following command: GRANT InfoUser to PETER you receive an error message "Invalid user privilege: INFOUSER". What must you do to avoid this problem? (Choose three) A. Recreate the role with the command CREATE ROLE InfoUser. B. Recreate user PETER with GRANT OPTION. “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 6

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated C. Grant the role the WITH ADMIN OPTION. D. Recreate the role with the command CREATE ROLE INFOUSER. E. Grant the role with the command GRANT "InfoUser" to PETER. Answer: A,D,E Explanation:

QUESTION NO: 15 Which of the following can you set up to enable the extraction of data from SAP Business Warehouse (BW) into SAP HANA? (Choose three) A. SAP System Landscape Directory (SLD) B. SAP BusinessObjects Data Services C. SAP Landscape Transformation (SLT) D. Open hub E. SAP HANA Direct Extractor Connection (DXC) Answer: B,D,E Explanation:

QUESTION NO: 16 Which of the following does an SAP BusinessObjects universe use to communicate with SAP HANA? A. ABAP B. SQL C. MDX D. BICS Answer: B Explanation:

QUESTION NO: 17 Which of the following must you do in order to use SAP BusinessObjects Explorer on SAP HANA data? (Choose two)


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. Create a delivery unit. B. Create a business layer. C. Create an information model. D. Create an information space. Answer: C,D Explanation:

QUESTION NO: 18 Where is the physical data stored, on which a calculation view is based? A. In the _SYS_BI schema B. In a schema C. In the _SYS_BIC schema D. In a package Answer: B Explanation:

QUESTION NO: 19 Which of the following automatically aggregates data? (Choose two) A. Analytic view B. Calculation view C. Column table D. Attribute view Answer: A,B Explanation:

QUESTION NO: 20 Which privilege type do you have to assign to a role, when you want to provide row-level access to data? A. ANALYTIC “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 8

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated B. PACKAGE C. SYSTEM D. SQL Answer: A Explanation:

QUESTION NO: 21 Using SAP BusinessObjects Data Services, in which of the following can you perform data transformations? (Choose two) A. Query B. Datastore C. XML File D. Script Answer: A,D Explanation:

QUESTION NO: 22 In which tool can you create information spaces for reporting? A. in the SAP HANA modeler perspective B. in the SAP HANA SQL editor C. in SAP BusinessObjects Explorer D. in the Information Design Tool Answer: C Explanation:

QUESTION NO: 23 During loading of data into SAP HANA you want to filter the source data. Where can you apply the filters? (Choose two)


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. In a query transformation in SAP BusinessObjects Data Services B. In a row generation transformation in SAP BusinessObjects Data Services C. In a SQL WHERE clause in SAP Landscape Transformation (SLT) D. In an ABAP code rule in SAP Landscape Transformation (SLT) Answer: A,D Explanation:

QUESTION NO: 24 You have created an MS Excel report on SAP HANA data. On which of the following could you store the Excel file and make it available for other users? A. Shared network drive B. SAP BusinessObjects Information Design Tool C. SAP HANA database D. SAP HANA studio Content node Answer: A Explanation:

QUESTION NO: 25 You want to restrict access to SAP HANA information models based on user groups. The models are accessed through an SAP BusinessObjects report. In which of the following can you implement these restrictions? (Choose two) A. The schema mapping B. The restricted measures C. The analytic privileges D. The universe Answer: C,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 26 Which of the following must you avoid to ensure your calculation view uses only the calculation engine? (Choose three) A. Combining SQL and CE Functions B. Reading from tables in the column store C. Reading from tables using SELECT statements D. Joins using SQL E. DO WHILE loops Answer: A,C,D Explanation:

QUESTION NO: 27 You have created an analytic view and an analytic privilege that filters on 3 attributes: - Sales region = "West" - Sales channel = "Online", "Retail" - Product category = "Electronics". After granting the analytic privilege to a user, what data can the user see? A)

B)

C)



D)

A. Exhibit A B. Exhibit B C. Exhibit C D. Exhibit D Answer: B Explanation:

QUESTION NO: 28 Which of the following sequences of steps is required before you can create a report on an analytic view using replicated SAP ERP data? A. Set up replication from ERP ? Create an analytic view ? Create analytic privileges ? Create a business layer B. Create a business layer ? Set up replication from ERP ? Create an analytic view ? Create analytic privileges C. Create an analytic view ? Create analytic privileges ? Set up replication from ERP ? Create a business layer D. Create an analytic view ? Set up replication from ERP ? Create analytic privileges ? Create a business layer Answer: A Explanation:

QUESTION NO: 29 “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 12

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated What does the following SQL statement do? SELECT SCORE() as SCORE, PRODUCT_NAME, * FROM PRODUCT_ITEMS WHERE CONTAINS(*,'Paper', FUZZY(0.8)) ORDER BY PRODUCT_NAME A. It performs a fuzzy search on all columns in the PRODUCT_NAME table for the term 'Paper'. B. It performs a fuzzy search count on the number of columns in the PRODUCT_NAME table that contain the term 'Paper'. C. It performs a fuzzy search on the PRODUCT_NAME column in the PRODUCT_ITEMS table for the term 'Paper'. D. It performs a fuzzy search of all columns in the PRODUCT_ITEMS table for the term 'Paper'. Answer: D Explanation:

QUESTION NO: 30 A company wants to use SAP BusinessObjects reporting tools. They cannot use Adobe Flash. They require scheduled, ready-made reports. Which reporting tool do you recommend? (Choose two) A. Dashboards B. Web Intelligence C. Explorer D. Crystal Reports Answer: B,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 31 You have created SAP HANA information models from replicated SAP ECC data. How can you compare the data of the replicated tables with the underlying ECC source data? (Choose two) A. Use the SAP ERP Data Browser (transaction SE16). B. Use the Catalog node to open table contents. C. Use transaction IUUC_REPL_CONTENT. D. Use the Data Provisioning view from the Quick Launch. Answer: A,B Explanation:

QUESTION NO: 32 A customer wants to report on large amounts of SAP HANA data. The users want to drill from the top aggregation level to the lowest granularity and try different types of graphical representations of the data on the fly. Which SAP BusinessObjects reporting tool would you recommend? A. SAP BusinessObjects Dashboards B. SAP BusinessObjects Web Intelligence C. SAP BusinessObjects Explorer D. SAP BusinessObjects Crystal Reports for Enterprise Answer: C Explanation:

QUESTION NO: 33 Which of the following are required elements when you create any type of hierarchy in SAP HANA? (Choose two) A. A child node B. An analytic view C. A data foundation D. An attribute view “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 14

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Answer: C,D Explanation:

QUESTION NO: 34 On which of the following servers can you configure SAP HANA Direct Extractor Connection (DXC) data sources? (Choose two) A. SAP Business Warehouse server B. SAP BusinessObjects Data Services server C. SAP HANA server D. SAP ECC server Answer: A,D Explanation:

QUESTION NO: 35 When you create a report in SAP BusinessObjects you notice that some columns of your SAP HANA information model are not available in the report. How can you make the columns available? (Choose two) A. Add the columns in SAP Landscape Transformation replication. B. Add the columns to the query panel of the report. C. Add the columns to the source table in the catalog node in SAP HANA studio. D. Add the columns to the business layer. Answer: B,D Explanation:

QUESTION NO: 36 How can you restrict SAP HANA modeling users from viewing sensitive data? A. Use scrambled source data. B. Remove SAP_DATA_ADMIN in the SQL privileges for the modeling users.


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated C. Use the pre-delivered MODELER role. D. Remove ALTER SYSTEM in the system privileges for the modeling users. Answer: A Explanation:

QUESTION NO: 37 An analytic view has two columns, SHIP_TO_COUNTRY and SHIP_FROM_COUNTRY, that contain ISO country codes. You must replace these codes with the English country names by joining to the same country attribute view twice. What must you create to achieve this? A. A derived attribute view B. A shared attribute view C. Two data foundations D. An attribute view using the Copy From method. Answer: A Explanation:

QUESTION NO: 38 How can you improve the performance of an information model? (Choose three) A. Use generated columns. B. Use analytic views wherever possible. C. Use indexes on all measures. D. Use attribute views wherever possible. E. Use constraint filters. Answer: A,B,E Explanation:

QUESTION NO: 39 Which of the following CE functions can you use to query an analytic view directly? “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 16

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. CE_CALC B. CE_AGGREGATION C. CE_OLAP_VIEW D. CE_JOIN_VIEW Answer: C Explanation:

QUESTION NO: 40 You want to add a column to a calculation view that displays the year-to-date revenue of the current fiscal year. How can you achieve this? (Choose two) A. Use a calculated attribute. B. Use a calculated measure. C. Use a variable. D. Use a CE function. Answer: B,D Explanation:

QUESTION NO: 41 Which of the following are required to create an attribute view? (Choose two) A. Data Foundation B. Default Schema C. Join D. Key Attribute Answer: A,D Explanation:

QUESTION NO: 42 You are running an SAP BusinessObjects Web Intelligence report that fetches data from an “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 17

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated analytic view. Which of the following 4 components is used by SAP HANA to provide data for this report? A. SAP host agent B. Delivery unit C. XS engine D. OLAP engine Answer: D Explanation:

QUESTION NO: 43 Which of the following are required to build a SQLScript calculation view? (Choose two) A. Define a data foundation. B. Define a measure. C. Set the MultiDimensional Reporting property to false. D. Add columns to the var_out output parameter. Answer: B,D Explanation:

QUESTION NO: 44 A company needs to load external data from a flat file into i nto SAP HANA. How can you do this? (Choose two) A. SAP HANA Direct Extractor Connection (DXC) B. SAP System Landscape Transformation (SLT) C. SAP HANA SQL Import statement D. SAP BusinessObjects Data Services Answer: C,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 45 Which of the following can you use to build the data foundation for an attribute view? (Choose two) A. Referential Join B. Union C. Projection D. Text Join Answer: A,D Explanation:

QUESTION NO: 46 Exhibit:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Which SAP BusinessObjects reporting tool can you use to create a report as shown in the attached screenshot? A. Web Intelligence B. Crystal Reports C. Analysis, edition for OLAP D. Dashboard Answer: D Explanation:

QUESTION NO: 47 You need to find out which users logged on to the SAP HANA system over the course of the last week. What would you check? A. The Audit log B. Entries in M_CONNECTIONS C. The nameserver_history.trc file D. The indexserver_alert.trc file Answer: A Explanation:

QUESTION NO: 48 How can you create a computed column in an information model? (Choose two) A. Create a calculated attribute within a calculation view. B. Create a counter in an analytic view. C. Create a restricted measure in a calculation view. D. Create a restricted measure in an analytic view. Answer: A,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 49 You create a graphical calculation view that is based on analytic views. What do you use to combine the data from the analytic views? A. Referential join B. Projection node C. Aggregation node D. Union Answer: D Explanation:

QUESTION NO: 50 You have loaded data into SAP HANA using SAP BusinessObjects Data Services. Where can you view that data? (Choose two) A. In the Catalog node of SAP HANA studio B. In the SAP BusinessObjects Data Services job monitor C. In the Content node of SAP HANA studio D. In the SAP BusinessObjects Data Services table preview Answer: A,D Explanation:

QUESTION NO: 51 What are benefits of using an SAP BusinessObjects business layer on top of SAP HANA? (Choose two) A. Business layers can be exported to the SAP BusinessObjects repository and be used by SAP BusinessObjects client tools. B. Reporting users can change replication settings in the business layer to access more data. C. Business layers can be exported to an SAP HANA database and be used for modeling. D. Reporting users can create individual reports based on separate information models using one business layer.


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Answer: A,D Explanation:

QUESTION NO: 52 What must you configure to directly access an SAP HANA analytic view using SAP BusinessObjects Analysis edition for Microsoft Office? A. RFC connection B. SAP HANA Direct Extractor Connection (DXC) C. Pre-delivered MODELING role D. System DSN Answer: D Explanation:

QUESTION NO: 53 Which of the following is used to make hierarchies available to reporting tools? A. CE Functions B. MDX C. SQLScript D. SQL Answer: B Explanation:

QUESTION NO: 54 What is the purpose of a template table in SAP BusinessObjects Data Services? A. To create pre-designed information models B. To fill an existing target table with new data C. To read source data and perform data transformations D. To create a target table and fill this table with data Answer: D “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 22

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Explanation:

QUESTION NO: 55 Which of the following tasks must you perform before you publish a universe within the SAP BusinessObjects Information Design Tool (IDT) on top of SAP HANA? (Choose two) A. Add the INFORMATION_CONSUMER role to the user. B. Add dimensions and measures to the business layer. C. Add information models to the data foundation. D. Add an information space to the business layer. Answer: B,C Explanation:

QUESTION NO: 56 You define a measure CURR_CONV to perform a currency conversion in an analytic view. When you query the analytic view it fails with a currency/unit conversion error message. What can you do to ensure that the query runs without error message? (Choose two) A. Maintain valid conversion rate entries in TCUR tables B. Set the Upon conversion failure parameter of CURR_CONV to Ignore C. Remove the Target Currency property in CURR_CONV D. Unselect the Enable for decimal shifts property in CURR_CONV Answer: A,B Explanation:

QUESTION NO: 57 460684bb-deee-44c2-80f9-71c46954fbe4: Which connection method that is listed on the left can you use with the tools that are available in the dropdown box on the right?


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. RFC B. ODBC/JDBC C. BICS D. ODBO Answer: A,B,C,D Explanation:

QUESTION NO: 58 You have made modifications to an information model within a delivery unit. You want to export the model to an SAP HANA target system. In the Schema Mapping dialog, where do you define the target system schema? A. In the Authorization schema B. In the Authoring schema C. In the _SYS_BI schema D. In the Physical schema Answer: D Explanation:

QUESTION NO: 59 An SAP BusinessObjects Web Intelligence report throws an SQL error during query execution. Which of the following could you check to resolve the error? (Choose two) A. The business layer B. The business view C. The Web Intelligence report variables D. The SAP HANA information model Answer: A,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 60 You want to load a large amount of source data (more than one billion rows) into SAP HANA for read-intensive information models. Which table type is recommended for this scenario? A. Global temporary table B. Decision table C. Row table D. Column table Answer: D Explanation:

QUESTION NO: 61 What happens when you turn on replication of an SAP ERP source system using SAP Landscape Transformation (SLT)? A. SLT creates ABAP code in the ERP system that writes to application tables. B. SLT creates ABAP code in the ERP system that writes to logging tables. C. SLT creates database triggers in the ERP system that write to logging tables. D. SLT creates database triggers in the ERP system that write to application tables. Answer: C Explanation:

QUESTION NO: 62 Which of the following are characteristics of using a Rapid Deployment Solution (RDS), such as Operational Reporting for SAP HANA? (Choose two) A. Relevant tables are replicated. B. SAP will create information models based on customer requirements. C. Customized tables and columns are replicated. D. Pre-designed information models are imported into SAP HANA. Answer: A,D Explanation: “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 25


QUESTION NO: 63 Which tasks do you have to perform if you want to use SAP BW with SAP HANA as the underlying database? (Choose three) A. Install SAP Business Warehouse Accelerator (BWA). B. Perform a database migration from your current DB to SAP HANA DB. C. Execute the report RS_BW_POST_MIGRATION. D. Upgrade to at least SAP NetWeaver Business Warehouse 7.30 SP5. E. Recreate SAP BW indexes after SAP HANA database migration. Answer: B,C,D Explanation:

QUESTION NO: 64 A calculation view that joins one fact table with dimension tables performs slowly. Which of the following can you do to improve performance? A. Turn the calculation view into an analytic view. B. Turn the calculation view into a simple calculation view. C. Load the calculation view into memory. D. Load the calculation view into the _SYS_BI schema. Answer: A Explanation:

QUESTION NO: 65 User A has to set up tables and views in a database schema that is owned by user B. Which of the following privilege must you grant? A. CREATE ANY to user A B. REFERENCES to user A “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 26

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated C. CREATE ANY to user B D. REFERENCES to user B Answer: A Explanation:

QUESTION NO: 66 You have to do reverse pivot transformations on large data tables before loading the data into SAP HANA. Which of the following do you recommend to use? A. SAP Landscape Transformation (SLT) B. SAP BusinessObjects Data Services 4.0 C. SAP HANA Direct Extractor Connection (DXC) D. SAP System Landscape Directory (SLD) Answer: B Explanation:

QUESTION NO: 67 You need to run a Web Intelligence report that requires data from SAP HANA filtered for a specific year based on ad hoc user input. For best performance, how would you achieve this? A. Use a pre-defined prompt based on a self-join in the business layer. B. Use input from a Web Intelligence report passed to a variable in an information model. C. Use a dynamic transformation rule during data provisioning. D. Use a prompt in the query of the Web Intelligence report. Answer: B Explanation:

QUESTION NO: 68


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A customer wants to reproduce the following SQL statement in SAP HANA: SELECT P.PROD_NAME, P.PROD_ID, PT.PROD_DESC FROM PRODUCTS P, PROD_TEXTS PT WHERE P.PROD_ID=PT.PROD_ID; Which of the following SQLScript constructs is equivalent to this SQL statement and yields the best performance? A. ot_products= CE_COLUMN_TABLE(PRODUCTS); ot_prodtexts= CE_COLUMN_TABLE(PROD_TEXTS); ot_all=CE_JOIN(:ot_products, :ot_prodtexts, [PROD_ID]); output=CE_PROJECTION(:ot_all, [PROD_NAME, PROD_ID, PROD_DESC]); B. SELECT P.PROD_NAME, P.PROD_ID, NULL as PROD_DESC FROM PRODUCTS P UNION SELECT NULL as PROD_NAME, PT.PROD_ID, PT.PROD_TEXTS FROM PROD_TEXTS PT; C. SELECT P.PROD_NAME, P.PROD_ID, PT.PROD_DESC FROM PRODUCTS P JOIN PROD_TEXTS PT ON P.PROD_ID=PT.PROD_ID; D. ot_products= CE_COLUMN_TABLE(PRODUCTS); ot_prodtexts= CE_COLUMN_TABLE(PROD_TEXTS); ot_all=CE_UNION_ALL(:ot_products, :ot_prodtexts); output=CE_PROJECTION(:ot_all, [PROD_NAME, PROD_ID, PROD_DESC]); Answer: A Explanation:

QUESTION NO: 69 Your SAP BusinessObjects report runs slowly. Which of the following actions could improve the performance? (Choose two) A. Restrict data by using variables in the information model. B. Tune the Array Fetch Size parameter of the universe. C. Move calculated measures from the information model to the report. D. Join all the analytic views with each other in the business layer. Answer: A,B Explanation:



QUESTION NO: 70 A company loads data every night from several source systems into multiple tables in SAP HANA using complex transformation rules. The calculation view that joins these tables performs unexpectedly slow. Which of the following could you investigate to be able to improve performance? (Choose two) A. Whether the joins and transformations of the tables can be moved to the data loading process of SAP BusinessObjects Data Services. B. Whether an InfoCube compression is running. C. Whether the calculation view needs to create large intermediate result sets. D. Whether savepoints are written during execution. Answer: A,C Explanation:

QUESTION NO: 71 How can you improve the performance of a report that is based on SAP HANA data? (Choose two) A. Ensure that all SAP HANA tables are in the same schema. B. Maintain appropriate constraint filters in SAP HANA. C. Ensure that all calculations are pushed down to the SAP HANA database. D. Gather new database statistics. Answer: B,C Explanation:

QUESTION NO: 72 You discover row count discrepancies between source data and SAP HANA information models. Which of the following can you investigate to find the source of the discrepancies? (Choose two)


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. Client filtering in the Delivery unit view. B. Joins in information models. C. Memory leaks. D. Client filtering in SAP Landscape Transformation (SLT). Answer: B,D Explanation:

QUESTION NO: 73 When you load data from SAP ECC using SAP BusinessObjects Data Services, where would you create an ABAP data flow? A. in a query transformation B. in a batch job C. in the ABAP editor (transaction SE38) D. in the Job overview (transaction SM37) Answer: B Explanation:

QUESTION NO: 74 When must you create a calculation view in SAP HANA? (Choose two) A. When you need to perform join operations. B. When you need calculations before aggregations. C. When key figures span across tables. D. When you need to perform a union of base tables. Answer: C,D Explanation:

QUESTION NO: 75 When you activate a procedure, in which schema is the procedure stored? A. SYSTEM “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 30

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated B. _SYS_BIC C. SYS_REPL D. _SYS_BI Answer: B Explanation:

QUESTION NO: 76 In which of the following can you use a FOR loop over your data? A. Monitoring View B. Calculation View C. Analytic View D. Attribute View Answer: B Explanation:

QUESTION NO: 77 Which of the following must an analytic view contain? A. A measure B. A calculated measure C. A hierarchy D. An attribute view Answer: A Explanation:

QUESTION NO: 78 In SAP HANA studio, in which of the following can you create users? (Choose two) A. The Administration console B. The Roles node C. The Content node “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 31

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated D. The SQL editor Answer: A,D Explanation:

QUESTION NO: 79 You created a model on a table XYZ.PRODUCTS. You successfully activated the model. When you run the data preview you receive an error message "Insufficient privilege. Not authorized". Which of the following 4 statements do you execute to resolve the error before you reactivate the model? A. GRANT SELECT on SCHEMA XYZ to _SYS_REPO B. GRANT SELECT on PRODUCTS to _SYS_REPO WITH GRANT OPTION C. GRANT SELECT on SCHEMA XYZ to _SYS_BIC WITH GRANT OPTION D. GRANT SELECT on PRODUCTS to _SYS_BIC Answer: B Explanation:

QUESTION NO: 80 You want to add a calculated column to an SAP BusinessObjects Web Intelligence report. In which application do you create the calculation to achieve best report performance? A. Central Management Console B. Information Design Tool C. Web Intelligence D. SAP HANA Studio Answer: D Explanation:

Topic 2, Volume B


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 81 Which types of calendar are available for time attribute views in SAP HANA? (Choose two) A. Fiscal B. Factory C. Gregorian D. Julian Answer: A,C Explanation:

QUESTION NO: 82 Which of the following operations can you use when you create a calculation view using the SAP HANA studio graphical interface? (Choose two) A. PROJECTION B. UNION C. INTERSECT D. INSERT Answer: A,B Explanation:

QUESTION NO: 83 Which data store type is recommended for write-intensive scenarios? A. Row store B. Column store C. Object store D. Table store Answer: A Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Which delivered role is mandatory for a system administrator in SAP HANA? A. SYS_ADMIN B. CONTENT_ADMIN C. SAP_ALL D. IC MODELER Answer: B Explanation:

QUESTION NO: 85 What is the purpose of the savepoint process in SAP HANA? A. Save changed data to the persistent storage when a transaction is committed. B. Save logs to persistent storage when a transaction is committed. C. Save changed data and logs to the persistent storage on a regular basis. D. Free-up memory by saving less used data to the persistent storage. Answer: C Explanation:

QUESTION NO: 86 Which best practices should you apply when you use SQL script in SAP HANA? (Choose three) A. Use the WHERE clause for updates. B. Use UNION ALL instead of UNION. C. Use dynamic SQL with variables. D. Use cursors. E. Use CE functions. Answer: A,B,E Explanation:

QUESTION NO: 87 You want to create a graphical calculation view using the SAP HANA studio. Which steps are “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 34

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated mandatory for this task? (Choose three) A. Define a projection. B. Write an SQL script. C. Save and activate the view. D. Define output fields. E. Choose a data source. Answer: C,D,E Explanation:

QUESTION NO: 88 How many result tables can a calculation view generate per session? A. Unlimited B. One C. Two D. None Answer: B Explanation:

QUESTION NO: 89 What are the advantages of using SAP BusinessObjects Data Services to load data into SAP HANA? (Choose three) A. You can load unstructured data into SAP HANA. B. You can merge data streams. C. You can use the same hardware. D. You can perform real-time data replication. E. You can use BI Content extractors or function modules. Answer: A,B,E Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated What is an example of a selective data load using SAP Landscape Transformation? A. Selected data field values are randomized and loaded into SAP HANA. B. Selected units or currencies are converted into recalculated amounts or values and loaded into SAP HANA. C. Selected data for transformation is split into portions. D. Selected data for a range of years is loaded into SAP HANA. Answer: D Explanation:

QUESTION NO: 91 You want to create a custom attribute in addition to your data model. How can you achieve this? A. Create the attribute as a calculated attribute within the analytic view. B. Create the attribute and add it to the appropriate system table manually. C. Create the attribute as a calculated measure within the attribute view. D. Create the attribute as a restricted attribute within the calculation view. Answer: A Explanation:

QUESTION NO: 92 Which of the following tools can you use to monitor the query time from SAP HANA? A. Central Management Console B. Performance tab of the System Monitor C. Event Viewer D. SQL Trace Answer: D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 93 You modify an existing view. How can you determine which models are affected by this change? A. Use the audit trail. B. Use the History feature for the changed model. C. Use the "Where-Used List" feature for the changed model. D. Use the "Auto Documentation" to compare the object version of the changed model. Answer: C Explanation:

QUESTION NO: 94 Which of the following sequences of steps is used to implement SAP HANA with SAP ERP? A. Data Provisioning ? SAP HANA system setup ? Modeling ? Consumption B. SAP HANA system setup ? Modeling ? Data Provisioning ? Consumption C. SAP HANA system setup ? Data Provisioning ? Modeling ? Consumption D. SAP HANA system setup ? Data Provisioning ? Consumption ? Modeling Answer: C Explanation:

QUESTION NO: 95 Which of the following are benefits of implementing SAP HANA? (Choose three) A. SAP HANA provides real-time analytics. B. SAP HANA performs much faster than the standard SAP ERP. C. SAP HANA provides pre-configured BI Content. D. SAP HANA combines OLTP and OLAP in one system. E. SAP HANA replaces SAP BW. Answer: A,B,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated You have a Web Intelligence report that requires data from SAP HANA filtered for a specific year. Where do you apply the filter for optimal performance? A. In the universe B. In the Web Intelligence report C. In the analytic view D. In the calculation view using an attribute value variable Answer: C Explanation:

QUESTION NO: 97 You want to use an extractor to build a model in SAP HANA. Which table can you use to view detailed information about the extractor? A. BSEG B. RODELTAM C. ROOSOURCE D. RSOLTPSOURCE Answer: C Explanation:

QUESTION NO: 98 Which of the following are direct outputs of an analytic view? (Choose three) A. Hierarchies B. Private attributes C. Restricted attributes D. Measures E. Attribute views Answer: B,D,E Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated You have an SAP HANA productive system with sensitive data.How can you restrict modeling users from viewing this data? (Choose two) A. Remove ALTER SYSTEM in the system privileges for the modeling users. B. Use randomized data for the development of data models. C. Allow modeling only on the SAP HANA development system and export/import the models to the productive system. D. Remove SAP_DATA_ADMIN in the SQL privileges for the modeling users. Answer: B,C Explanation:

QUESTION NO: 100 When building a business layer to report on SAP HANA, what do you have to do if you want to display more than 5,000 rows? A. Remove all filters from the analytic views. B. Deactivate the Limit Size of Result Set parameter in the Central Management Console. C. Set the Array Fetch Size parameter to the maximum in the relational connection. D. Deactivate the Limit Size of Result Set parameter in the business layer. Answer: D Explanation:

QUESTION NO: 101 You model hierarchies in attribute views. Which of the following technologies do you use to make these hierarchies available for reporting tools? A. JDBC B. BICS C. ODBO D. ODBC Answer: C Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 102 Which of the following properties of a derived attribute view can you modify? A. Description B. Description mapping C. Calculated attributes D. Filters Answer: A Explanation:

QUESTION NO: 103 In SAP ERP there are more than 50,000 application tables. How do you determine the relevant SAP ERP tables to replicate in SAP HANA and their dependencies? A. Use SAP ERP Data Modeler (transaction SD11). B. Use SAP ERP ABAP Dictionary Maintenance (transaction SE11). C. Use the SAP ERP Tables and Indexes Monitor(transaction DB02). D. Use SAP ERP Data Browser (transaction SE16). Answer: A Explanation:

QUESTION NO: 104 What outputs can you create in an attribute view? (Choose two) A. Key Attributes B. Calculated Attributes C. Restricted Measures D. Calculated Measures E. Private Attributes Answer: A,B Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 105 Which technologies use trigger-based replication? (Choose two)

A. ABAP extractors B. Test Data Migration Server (TDMS) C. Standard SQL database replication D. Near Zero Downtime Answer: B,D Explanation:

QUESTION NO: 106 Which reporting tool can you use to display native parent-child hierarchies from SAP HANA? A. Microsoft Excel B. SAP BusinessObjects WebIntelligence C. SAP BusinessObjects Analysis, edition for OLAP D. SAP BusinessObjects Analysis, edition for Microsoft Office Answer: A Explanation:

QUESTION NO: 107 What is one of the advantages of using SAP BusinessObjects Analysis, edition for Microsoft Office? A. Direct access to attribute views in SAP HANA B. Direct access to column tables in SAP HANA C. Direct connection to SAP HANA via MDX D. Direct connection to SAP HANA via BICS Answer: D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 108 Which of the following privileges do you need to activate views? A. SELECT option on the _SYS_BIC schema B. SELECT option on the _SYS schema C. SELECT option on the _SYS_BI schema D. SELECT option on the _SYS_REPO schema Answer: D Explanation:

QUESTION NO: 109 In a reporting scenario you use an Opening Date attribute in the data foundation that contains information about your stores. You want to determine the number of years each store has been in business. How do you achieve this? A. Use calculated measures. B. Use time attributes. C. Use calculated attributes. D. Use private attributes. Answer: C Explanation:

QUESTION NO: 110 Which SAP BusinessObjects tools require an SAP BusinessObjects semantic layer (universe) to access data in SAP HANA? (Choose three) A. Crystal Reports 2011 B. Crystal Reports for Enterprise C. Dashboards D. Analysis Office v1.1 E. WebIntelligence Answer: B,C,E Explanation:



QUESTION NO: 111 For what purpose do you use SQL Script in SAP HAN? (Choose two) A. To transfer a large amount of data between engines B. To achieve very high performance on SELECT statements C. To combine two analytic views D. To create database procedures E. To shift complex calculations and logic to the client side Answer: C,D Explanation:

QUESTION NO: 112 Which connectivity combination between MS Excel and SAP HANA provides multidimensional reporting capabilities? A. ODBO connector via SQL requests to analytic or calculation views B. ODBC connector via MDX requests to analytic or calculation views C. ODBO connector via MDX requests to analytic or calculation views D. ODBO connector via MDX requests to column tables Answer: C Explanation:

QUESTION NO: 113 Which of the following are benefits of using accelerators with SAP HANA? (Choose two) A. They provide pre-built business content. B. They provide pre-built customer-specific solutions. C. They reduce the time required for implementation. D. They eliminate the need for customization. Answer: A,C Explanation:



QUESTION NO: 114 How can you evaluate the speed of a calculation within the database? (Choose two) A. Use the Data Preview function in the SAP HANA studio. B. Execute a Web Intelligence report and check the duration of the previous refresh. C. Execute an information space using SAP BusinessObjects Explorer. D. Write and execute an appropriate SQL statement. Answer: A,D Explanation:

QUESTION NO: 115 You are running an SAP BusinessObjects WebIntelligence report that fetches data from SAP HANA. Which components will be used inside SAP HANA for providing data to this report? (Choose two) A. Persistence Layer B. MDX C. Session Management D. Authorization Manager Answer: C,D Explanation:

QUESTION NO: 116 You want to design a model in SAP HANA. Which of the following modeling constructs do you use to create an analytic view? (Choose three) A. Join types B. Attribute views C. User privileges D. Tables E. Analytic views Answer: A,B,D



QUESTION NO: 117 Which of the following are functions of the DB trigger within SAP Landscape Transformation (SLT)? (Choose two) A. Ensure that replicated changes are kept within the logging tables. B. Record relevant changes in logging tables. C. Include only relevant tables for DB recording. D. Decluster table classes into a transparent format. Answer: B,C Explanation:

QUESTION NO: 118 Which SAP BusinessObjects tool do you use to visualize real-time key performance indicators with simu-lations? A. Explorer B. Analysis, edition for OLAP C. Web Intelligence D. Dashboards Answer: D Explanation:

QUESTION NO: 119 Your customer wants to use SAP BusinessObjects Data Services to migrate and transform large volumes of data to SAP HANA. What do you recommend? A. Use ABAP data flows. B. Use RFC/BAPI function calls. C. Use the RFC_READ_TABLE. D. Use IDOCs.


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Answer: A Explanation:

QUESTION NO: 120 Where does SAP recommend you create calculated measures? A. In a column view B. In a business layer C. In an attribute view D. In an analytic view Answer: D Explanation:

QUESTION NO: 121 You want to test the quality of SAP HANA data by using a set of results from the source system. How can you retrieve the required data from SAP HANA? (Choose three) A. Use SAP Landscape Transformation (SLT). B. Use the data preview in SAP HANA studio. C. Use an SAP BusinessObjects client tool (such as Explorer or Web Intelligence). D. Use the database schema _SYS_REPO. E. Write and execute an appropriate SQL statement. Answer: B,C,E Explanation:

QUESTION NO: 122 What are benefits of using a business layer on top of SAP HANA? (Choose two) A. An extra layer of granular security B. Improved database calculation speed C. Fast throughput via BICS connectivity D. Users can use business names instead of technical names


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Answer: A,D Explanation:

QUESTION NO: 123 You want to report on data from SAP HANA using MS Excel. How can you achieve this? (Choose two) A. Select an analytic view using the Data Connection wizard. B. Create a ODBC connection between SAP HANA and MS Excel. C. Select an attribute view using the Data Connection wizard. D. Create an ODBO connection between SAP HANA and MS Excel. Answer: A,D Explanation:

QUESTION NO: 124 You are building a calculation view and want to select data from an analytic view. How can you achieve better performance for this requirement? A. Use CE functions B. Use SQL statements C. Use L programming D. Use table indexing Answer: A Explanation:

QUESTION NO: 125 Which connectivity options can you use to create a SAP BusinessObjects universe on SAP HANA? (Choose two) A. OLAP connection using MDX B. Relational connection using BICS C. Relational connection using ODBC D. Relational connection using MDX “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 47

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated E. Relational connection using JDBC Answer: C,E Explanation:

QUESTION NO: 126 You are using SAP BusinessObjects Data Services as your ETL tool. What is the next step required after you have created the DataStore and imported the metadata from an SAP ERP system into SAP HANA? A. Import data from the SAP ERP system into SAP HANA. B. Create an SAP BusinessObjects Data Services job to migrate data to SAP HANA. C. Import the metadata from SAP HANA into SAP BusinessObjects Data Services. D. Create a connection in SAP BusinessObjects Data Services to the SAP ERP system. Answer: C Explanation:

QUESTION NO: 127 When must you create a calculation view in SAP HANA? A. When you need to create a star schema B. When key figures span across tables C. When you need calculations before aggregations D. When you need analytic operations like aggregation Answer: B Explanation:

QUESTION NO: 128 Which of the following tasks must you perform before you build a business layer within the SAP BusinessObjects Information Design Tool (IDT) on top of SAP HANA? (Choose three) A. Publish the connection to CMS. B. Build a query to test the connection. “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 48

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated C. Build a relational connection to SAP HANA. D. Build an OLAP connection to SAP HANA. E. Build a data foundation. Answer: A,C,E Explanation:

QUESTION NO: 129 Which of the following are functions of the controller in the SAP Landscape Transformation (SLT) server? (Choose two) A. Create repositories in the source system. B. Write data to the SAP HANA system using the DB connection. C. Map database structures between SAP HANA and the source system. D. Schedule replication processes. Answer: C,D Explanation:

QUESTION NO: 130 You have to design a report that shows actual, planned, and variance values. How do you implement this requirement if you want to achieve the best performance? A. Use a calculation view based upon two analytic views using a union. B. Use a calculation view based upon two analytic views using a join. C. Use a single source data foundation in the Universe Design Tool and include the two analytic views. D. Use a multisource-enabled data foundation in the Universe Design Tool for each analytic view. Answer: A Explanation:

QUESTION NO: 131 You create an analytic view and want to restrict access to departments with specific values using analytic privileges. Which tasks do you have to perform to accomplish this? (Choose three)


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated A. Assign restricted values to the attribute view. B. Assign values to be restricted. Choose at least one information model to assign restrictions. C. Assign the analytic privilege to a user or role. D. Assign values to be restricted to a content table. E. Choose an attribute to define restricted values for it. Answer: B,C,E Explanation:

QUESTION NO: 132 Your customer wants to implement a SAP product that: - Provides near real-time replication to SAP HANA - Connects SAP HANA to a non-SAP source system and SAP BW - Uses SAP extractors What do you recommend? A. SAP Legacy System Migration Workbench (LSMW) B. SAP Landscape Transformation (SLT) C. Sybase Replication Server D. SAP BusinessObjects Data Services 4.0 Answer: D Explanation:

QUESTION NO: 133 Which of the following steps is required for configuring SAP Landscape Transformation (SLT)? A. Define the number of background work processes in SLT. B. Define an RFC connection from SLT to SAP HANA. C. Define a DB connection from SLT to the source system. D. Define the number of jobs to be used for data replication. Answer: D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 134 Which tasks do you have to perform if you want to use SAP BW with SAP HANA as the underlying database? A. Recreate SAP BW indexes after SAP HANA database migration. B. Do a heterogeneous system copy from your current DB to SAP HANA DB. C. Ensure that you have at least SAP NetWeaver Business Warehouse 7.02 installed. D. Do a homogeneous system copy from your current DB to SAP HANA DB. Answer: B Explanation:

QUESTION NO: 135 Which statement best describes an analytic view as a multidimensional view? A. Analytic views are composed of one data foundation and one or more attribute views. B. Analytic views are composed of at least one attribute view joined with more than one data foundation. C. Analytic views are composed of multiple joined data foundations. D. Analytic views are composed of at least one attribute view. Answer: A Explanation:

QUESTION NO: 136 Which of the following authentication methods are supported for Single Sign-On for SAP HANA? A. Kerberos B. LDAP over SSL C. Secure Network Communication (SNC) D. SAML CAS (Central Authentication Service) Answer: A Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 137 Which SAP tool would you use for data cleansing before data is loaded into SAP HANA? A. SAP BusinessObjects Information Steward B. SAP BusinessObjects Data Services C. SAP Landscape Transformation D. SAP NetWeaver Master Data Management Answer: B Explanation:

QUESTION NO: 138 Which application enables you to create a multisource universe in SAP BusinessObjects BI 4.0? A. SAP HANA Studio B. Information Design Tool C. Universe Design Tool D. Information Engine Answer: B Explanation:

QUESTION NO: 139 What can you use to transform data from SAP Business Warehouse (BW) into SAP HANA? A. SAP Landscape Transformation (SLT) B. SAP BW extractors C. SAP BusinessObjects Data Services D. SAP Legacy System Migration Workbench (LSMW) Answer: C Explanation:

QUESTION NO: 140


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated You develop a disaster recovery plan. What do you have to consider in case of a disk failure? (Choose three) A. Configuration files can be restored automatically. B. Savepoints can be backed up. C. Log volumes can be backed up. D. Non-committed transactions can be recovered. E. Committed transactions can be recovered. Answer: B,C,E Explanation:

QUESTION NO: 141 What is the behavior of a Text Table Join where language column SPRAS is available? A. Left Outer Join B. Right Outer Join C. Inner Join D. Referential Join Answer: A Explanation:

QUESTION NO: 142 What are the key benefits of using SAP BusinessObjects Explorer with SAP HANA? (Choose three) A. You do not need to create your own queries to access information. B. You can easily create your own queries to access information. C. You can access information for data discovery intuitively. D. You can execute ad-hoc business analytics quickly. E. You can easily create an IDT business layer. Answer: A,C,D Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 143 How can you improve the quality of your information model design? (Choose three) A. Use ´case´ or ´if´ statements whenever possible. B. Use row-based database expressions. C. Design your views to be reusable. D. Modularize your views. E. Avoid duplications in your modeling. Answer: C,D,E Explanation:

QUESTION NO: 144 You want to retrieve data from SAP HANA and restrict access to certain data columns for specific user groups. Where can you implement this? A. In the analytic privileges B. In the data foundation C. In the business layer D. In the SQL privileges Answer: C Explanation:

QUESTION NO: 145 Which new connection type is available as of SAP BusinessObjects Data Services 4.0? A. Operational Data Provider B. BAPI function calls C. IDOCs D. Read table via ABAP data flows Answer: A Explanation:


SAP C_HANAIMP_1 Exam : Sept - 2014 Updated QUESTION NO: 146 Your customer has the following reporting requirements: - Real-time profitability reporting on large-scale data volumes - On-the-fly analysis of profitability data at any level of granularity, aggregation, and dimension - Cost allocation reports with significantly faster processing time Which application do you recommend? A. SAP Bank Analyzer with SAP HANA B. SAP Deposits Management with SAP HANA C. SAP HANA CO-PA Accelerator D. SAP HANA for Banking Answer: C Explanation:

QUESTION NO: 147 Which feature is supported by the backup and recovery process within the standard delivery of SAP HANA? A. Incremental backup B. Information model recovery C. Point-in-time recovery D. Automatic backup of archiving log files scheduled within SAP HANA Answer: C Explanation:

QUESTION NO: 148 Which of the following tasks are prerequisites for creating a hierarchy in SAP HANA? (Choose three) A. Define an output structure for the attribute view. B. Define the data foundation. C. Choose the type of hierarchy. D. Define calculated attributes for the nodes of the hierarchy. E. Define an analytic view. “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 55

SAP C_HANAIMP_1 Exam : Sept - 2014 Updated Answer: A,B,C Explanation:

QUESTION NO: 149 Which view in SAP HANA studio do you use to add additional users? A. Properties View B. Quick launch View C. Console View D. Navigator View Answer: D Explanation:

QUESTION NO: 150 Which tool do you use for complex data transformation of SAP ERP data? A. SAP Landscape Transformation (SLT) B. Sybase Replication Server C. SAP BusinessObjects Data Services D. SAP BusinessObjects Explorer Answer: C Explanation:

QUESTION NO: 151 You need to retrieve data from SAP HANA that is restricted to a certain region and specific users. How can you implement this security strategy? A. By assigning SQL privileges to the necessary users B. By assigning Analytic privileges to the necessary users C. By assigning System privileges to the necessary users D. By assigning Package privileges to the necessary users Answer: B “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 56


QUESTION NO: 152 Which security settings can you apply in analytic privileges? (Choose two) A. Grant access to analytic views. B. Restrict access within an analytic view using measure values. C. Restrict access within an analytic view using attribute values. D. Restrict access to hierarchies. Answer: A,C Explanation:

QUESTION NO: 153 You want to broadcast reports that use data from SAP HANA.Which SAP BusinessObjects tool do you use? A. Analysis, edition for OLAP B. Dashboards C. Crystal Reports D. Explorer Answer: C Explanation:

QUESTION NO: 154 What can be used as a source for the data foundation of an analytic view? (Choose two) A. A table that contains surrogate IDs referring to primary keys in the attribute views B. A table that contains foreign keys referring to primary keys in the attribute views C. A table that contains business facts or measures D. A table that contains only descriptive attributes Answer: B,C Explanation: “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 57


QUESTION NO: 155 If you want to create or drop tables in a schema, which privilege type do you need? A. SYSTEM B. ANALYTIC C. PACKAGE D. SQL Answer: D Explanation:

QUESTION NO: 156 When you activate an analytic view, a column view is created. In which schema is this column view stored? A. _SYS_BIC B. _SYS_BI C. _SYS_REPO D. _SYS Answer: A Explanation:

QUESTION NO: 157 You have imported models from the development system. What is the recommended way to activate dependent models in SAP HANA? A. Use the Activate with History function. B. Use the Where-Used List function. C. Use the Cascade Activate function. D. Activate each view manually. Answer: C Explanation: “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 58


QUESTION NO: 158 Which SAP BusinessObjects reporting tool should you use to answer ad-hoc questions and interact with shared information? A. Crystal Reports B. Dashboards C. Explorer D. WebIntelligence Answer: D Explanation:

QUESTION NO: 159 How can you assess the quality of the loaded data in SAP HANA? (Choose two) A. Configure the SAP Landscape Transformation tool to implement the data quality process. B. Compare data from reports in SAP BusinessObjects against the SAP HANA _SYS_STATISTICS table. C. Perform master data quality checks in SAP ERP prior to replication in SAP HANA. D. Compare reports in SAP BusinessObjects against source data for specific selections. Answer: C,D Explanation:

QUESTION NO: 160 Which SAP HANA model is recommended for reporting purposes where read operations on mass data are required? A. Analytic view B. Calculation view using SQL C. Calculation view using SQL Script D. Attribute view Answer: A “Study & Get 100% Certified - Any Exam, Any Time” - www.erpexams.com 59

1.C_HANAIMP_1

Recommend Documents