FDD eNodeB LTE parameters description - LR13.3.L LTE/DCL/INF/041724
FDD eNodeB LTE Parameters Description
Release : Document nb : Document issue : Document status : Date :
LR13.3.L LTE/DCL/INF/041724 01.03/EN Standard 27-Feb-2014
Passing on or copying of this document, use and communication of its contents not permitted without Alcatel·Lucent written authorization
Copyright© 2013 Alcatel-Lucent, All Rights Reserved Printed in France
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is “write protected”; it may be altered only by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically ensures access to the current issue. Any hardcopies taken must be regarded as uncontrolled copies. ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of AlcatelLucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose the information only to its employees with a need to know, and shall protect the information from disclosure and dissemination to third parties. Except as expressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the information contained herein. If you have received this document in error, please notify the sender and destroy it immediately.
V01.03 / EN - Standard 27-Feb-2014
FDD eNodeB LTE parameters description - LR13.3.L LTE/DCL/INF/041724
Version
Release
Date
01.01 01.02 01.03
LR13.3 LR13.3 LR13.3
27-Jul-13 4-Oct-13 27-Feb-14
V01.03 / EN - Standard 27-Feb-2014
Description of Changes Draft created from LR13.3 MIM and parameters review Alignment with LPUG 09.05 Alignment with LPUG 09.06
Passing on or copying of this document, use and communication of its contents not permitted without Alcatel·Lucent written authorization
1/1
FDD eNodeB LTE parameters description - LR13.3.L LTE/DCL/INF/041724
Parameter
Object
V01.03/ EN - Standard 27-Feb-2014
Object Path
Class
Service Impact
Family
Sub-Family
Definition
Unit
Value Type
Min
max
Step
Enum Value
Default value
Source
Feature id
Feature name
Feature Release
a3OffsetMax
MobilityRobustnessOptCell
---
3
none
Mobility
Intra-LTE RRC Connected Mode Mobility Procedures
This parameter indicates the maximum value of the a3Offset that the MRO algorithm is allowed to attempt.
dB
Float
-15
15
0.5
6
eng_tunable
L115852
SON Intra-Frequency Handover Optimisations
LR13.3
a3OffsetMin
MobilityRobustnessOptCell
---
3
none
Mobility
Intra-LTE RRC Connected Mode Mobility Procedures
This parameter indicates the minimum value of the a3Offset that the MRO algorithm is allowed to attempt.
dB
Float
-15
15
0.5
0.5
eng_tunable
L115852
SON Intra-Frequency Handover Optimisations
LR13.3
acBarringClass0To9
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload classes 0 through 9. It is the parameter “PSIST” in C.S0004-A.
N.A.
Integer
0
63
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass10
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 10.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass11
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 11.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass12
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 12.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass13
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 13.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass14
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 14.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClass15
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for access overload class 15.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClassEmg
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for emergency calls and emergency messages transmissions for access classes 0 through 9. It is the parameter “PSIST_EMG” in C.S0004-A.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClassMsg
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for message transmissions. It is the parameter “MSG_PSIST” in C.S0004-A.
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringClassReg
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
N.A.
Integer
0
7
1
0
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
acBarringStatus
OneXRttAccessBarring
----
3
none
Mobility
CS Fallback and SRVCC
N.A.
Boolean
False
customer_settable
134791
enhanced CSFB to 1xRTT
LR13.1
N.A.
Boolean
false
eng_tunable
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
accessBarringCsfbStatus
AccessBarring
---
3
none
Call Management
Call Handling
accessBarringForEmergencyCalls
AccessBarring
---
3
none
Call Management
Call Handling
AccessBarring
---
accessBarringTime
AccessBarringForCsfb
---
accessBarringTime
---AccessBarringForOriginatingCalls
accessBarringTime
AccessBarringForSignaling
---
SsacBarringForVideoMMTEL
---
accessBarringTime
SsacBarringForVoiceMMTEL
---
accessClass11Barring
AccessBarringForCsfb
accessClass11Barring
AccessBarringForOriginatingCalls
accessClass11Barring
AccessBarringForSignaling
accessClass11Barring
SsacBarringForVideoMMTEL
accessClass11Barring
SsacBarringForVoiceMMTEL
accessClass12Barring
AccessBarringForCsfb
accessClass12Barring
AccessBarringForOriginatingCalls
accessClass12Barring
AccessBarringForSignaling
accessClass12Barring
SsacBarringForVideoMMTEL
accessClass12Barring
SsacBarringForVoiceMMTEL
accessClass13Barring
AccessBarringForCsfb
accessClass13Barring
AccessBarringForOriginatingCalls
accessClass13Barring
AccessBarringForSignaling
accessClass13Barring
SsacBarringForVideoMMTEL
accessClass13Barring
SsacBarringForVoiceMMTEL
accessClass14Barring
AccessBarringForCsfb
accessClass14Barring
AccessBarringForOriginatingCalls
accessClass14Barring
AccessBarringForSignaling
accessClass14Barring
SsacBarringForVideoMMTEL
accessClass14Barring
SsacBarringForVoiceMMTEL
accessClass15Barring
AccessBarringForCsfb
accessClass15Barring
accessBarringStatus
accessBarringTime
3
3
3
3
3
none
none
none
none
none
Call Management
Call Management
Call Management
Call Management
Call Management
This parameter contains the 1xRTT access class barring parameters the UE uses to calculate the access class barring factor, see C.S0097. Parameter used for calculating the access class barring factor for autonomous registrations. It is the parameter “REG_PSIST” in C.S0004-A. This parameter provides the status of the 1xRTT access class barring. When set to true, acBarringConfig1XRTT-r9 IE is included in SIB8. See TS 36.331. This parameter determines the status of Access Barring information for CS Fallback which is broadcast in the cell (in SystemInformationBlockType2): - false: no barring for mobile originating CS Fallback. - true: barring for mobile originating CS Fallback.
This parameter indicates whether access is barred in the cell originating emergency calls. See TS 36.331. Broadcast in SystemInformationBlockType2. This parameter determines the type of Access Barring information which is broadcast in the cell (in SystemInformationBlockType2): - none: no access classes are barred. - emergencyCallsExclusively: only the bit indicating whether emergency calls are barred is broadcast. - signalingOnly: access barring information is broadcast for signaling calls only (the bit for emergency calls is also broadcast). - originatingCallsOnly: access barring information is broadcast for originating calls only (the bit for emergency calls is also broadcast). - signalingAndOriginatingCalls: access barring information is broadcast for both signaling calls and originating calls (the bit for emergency calls is also broadcast).
N.A.
Enumerate
none(0), emergencyCallsExclusively(1), signalingOnly(2), originatingCallsOnly(3), signalingAndOriginatingCalls(4)
none
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
This parameter determines the average time for which a UE considers the cell barred for originating calls. The UE sets timer T303 to a value {(0.7+ 0.6 * rand) * accessBarringTime}, where rand is a random value drawn between 0 and 1. See TS 36.331. Broadcast in SystemInformationBlockType2.
s
Enumerate
s4(0), s8(1), s16(2), s32(3), s64(4), s128(5), s256(6), s512(7)
s32
eng_tunable
L115225
EUTRAN Standard Alignment
LR13.1
Call Handling
This parameter determines the average time for which a UE considers the cell barred for originating calls. The UE sets timer T303 to a value {(0.7+ 0.6 * rand) * accessBarringTime}, where rand is a random value drawn between 0 and 1. See TS 36.331. Broadcast in SystemInformationBlockType2.
s
Enumerate
s4(0), s8(1), s16(2), s32(3), s64(4), s128(5), s256(6), s512(7)
s32
eng_tunable
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
This parameter determines the average time for which the UE considers the cell barred for signaling calls. The UE sets timer T303 to a value {(0.7+ 0.6 * rand) * accessBarringTime}, where rand is a random value drawn between 0 and 1. See TS 36.331. Broadcast in SystemInformationBlockType2.
s
Enumerate
s4(0), s8(1), s16(2), s32(3), s64(4), s128(5), s256(6), s512(7)
s32
eng_tunable
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
This parameter determines the average time for which a UE considers the cell barred for originating calls. The UE sets timer T303 to a value {(0.7+ 0.6 * rand) * accessBarringTime}, where rand is a random value drawn between 0 and 1. See TS 36.331. Broadcast in SystemInformationBlockType2.
s
Enumerate
s4(0), s8(1), s16(2), s32(3), s64(4), s128(5), s256(6), s512(7)
s32
eng_tunable
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
This parameter determines the average time for which a UE considers the cell barred for originating calls. The UE sets timer T303 to a value {(0.7+ 0.6 * rand) * accessBarringTime}, where rand is a random value drawn between 0 and 1. See TS 36.331. Broadcast in SystemInformationBlockType2.
s
Enumerate
s4(0), s8(1), s16(2), s32(3), s64(4), s128(5), s256(6), s512(7)
s32
eng_tunable
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L97933
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Boolean
false
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
Boolean
false
system_restricted
L115225
EUTRAN Standard Alignment
LR13.1
Boolean
false
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Boolean
false
system_restricted
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
3
none
Call Management
Call Handling
---
3
none
Call Management
Call Handling
AccessBarringForOriginatingCalls
---
3
none
Call Management
Call Handling
accessClass15Barring
AccessBarringForSignaling
---
3
none
Call Management
Call Handling
accessClass15Barring
SsacBarringForVideoMMTEL
---
3
none
Call Management
Call Handling
This parameter specifies whether the UE access class 15 (PLMN Staff) is barred in the cell for originating calls. See TS 36.331. Broadcast in SystemInformationBlockType2.
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
accessClass15Barring
SsacBarringForVoiceMMTEL
---
3
none
Call Management
Call Handling
This parameter specifies whether the UE access class 15 (PLMN Staff) is barred in the cell for originating calls. See TS 36.331. Broadcast in SystemInformationBlockType2.
Boolean
false
system_restricted
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
accessClassBarringDefense
OverloadControl
--
3
none
Call Management
Call Handling
This parameter allows or forbids eNodeB, in critical overload, to use Access Class Barring for MO-data and MO-signaling calls as defense action to avoid consuming CPU to reject RRC Connection Requests, leaving the decision to the UEs.
N.A.
Boolean
TRUE
system_restricted
L115805
Overload Control Phase 3
LR13.1
Call Handling
This parameter determines the probability that a UE may access the cell for an originating CS Fallback. When this parameter is set, the UE draws a random number between 0 and 1. If the drawn number is lesser than the accessProbabilityFactor, the UE considers the cell as not barred and may initiate an originating CS Fallback. See TS 36.331. Broadcast in SystemInformationBlockType2.
%
Enumerate
p00(0), p05(1), p10(2), p15(3), p20(4), p25(5), p30(6), p40(7), p50(8), p60(9), p70(10), p75(11), p80(12), p85(13), p90(14), p95(15)
p50
eng_tunable
L115225
EUTRAN Standard Alignment
LR13.1
Call Handling
This parameter determines the probability that a UE may access the cell for an originating call. When this parameter is set, the UE draws a random number between 0 and 1. If the drawn number is lesser than the accessProbabilityFactor, the UE considers the cell as not barred and may initiate an originating call. See TS 36.331. Broadcast in SystemInformationBlockType2.
%
Enumerate
p00(0), p05(1), p10(2), p15(3), p20(4), p25(5), p30(6), p40(7), p50(8), p60(9), p70(10), p75(11), p80(12), p85(13), p90(14), p95(15)
p50
eng_tunable
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
This parameter determines the probability that a UE may access the cell for a signaling call. When this parameter is set, the UE draws a random number between 0 and 1. If the drawn number is lesser than the accessProbabilityFactor, the UE considers the cell as not barred and may initiate a signaling call. See TS 36.331. Broadcast in SystemInformationBlockType2.
%
Enumerate
p00(0), p05(1), p10(2), p15(3), p20(4), p25(5), p30(6), p40(7), p50(8), p60(9), p70(10), p75(11), p80(12), p85(13), p90(14), p95(15)
p50
eng_tunable
L97933
Dynamic SysInfo Modification under Cell Parameter Change
LA2.0
Call Handling
This parameter determines the probability that a UE may access the cell for an originating call. When this parameter is set, the UE draws a random number between 0 and 1. If the drawn number is lesser than the accessProbabilityFactor, the UE considers the cell as not barred and may initiate an originating call. See TS 36.331. Broadcast in SystemInformationBlockType2.
%
Enumerate
p00(0), p05(1), p10(2), p15(3), p20(4), p25(5), p30(6), p40(7), p50(8), p60(9), p70(10), p75(11), p80(12), p85(13), p90(14), p95(15)
p50
eng_tunable
L114644
EUTRAN Standard Alignment on 3GPP Rel-9
LA5.0
--- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
---
accessProbabilityFactor
AccessBarringForCsfb
accessProbabilityFactor
--