The scope of work includes the furnishing of all labour, material and services for the design, supply, manufacture, testing and inspection at works, delivery to site and rectification of d…Full description
Design
agitatorFull description
Descripción completa
AGITATOR HANDBOOK
Full description
Full description
AGITATOR TORQUE CALCULATIONFull description
Full description
agitatorFull description
Shaft Calculations For AgitatorFull description
Descripción completa
Hoja de datosDescripción completa
Cal Agricola colombiana-reahbilitacion de suelos-agricultura sostenibleDescripción completa
Descripción completa
Descripción completa
AGITATOR CALCULATIONS
This document is the property of Shroff & Associates ( Engg.) Pvt. Ltd. Unauthorised disclosure to any third party or duplication is not permitted.
AGITATOR CALCULATIONS (PROCESS DESIGN ) Reynolds Number = (D2 N p) / u where D dia . Of agitator D= D1= D=
600 mm 1.9686 feet 23.6232 inches
N = Speed of agitator in rpm N= N1=
150 RPM 9000 RPH
3
p= density of fluid in lb/ft
p= p= u= u1=
Viscosity
963 60.1875 450 1089
Reynolds Number = (D12N1*p) / u1 Nre=
1927.684235
HORSE POWER CALCULATIONS
H.P. = (Np*N3*D5*S)/(1.524*1013) where Np= POWER NUMBER from Handbook of chemical engg. calculations by chopey or Ludwing vol.1 Or Practical process engg by Sandler density = 1 gm/cm3 density = 62.5 lb/ft3 Np= 1.7 S=Specific Gravity S= 1 D = Dia of agitator in inches D= 23.6232 23.6232 inch N= 150 RPM no.of blades n= 2 Power=