Allegro 4 Tutorial - Allegro Wiki

08/05/13

Al l eg r o 4 Tutor i al - Al l eg r o Wi ki

Allegro 4 Tutorial From Allegro Allegro Wiki Wik i

Contents 1 Introduction 2 Starting Allegro 3 Learning Allegro 4 Allegro Tips 5 Sample Code 6 Eliminating Overhead 7 Using Microsoft Visual C++ with Allegro 8 Credits

Introduction Introduction This tutorial requires an understanding of C. This teaches the beginnings of using the Allegro library. Once a basic understanding is achieved, using the library is as simple as reading the library docs, which is what I learned from, and learned very well. Allegro is one of the best documented libs I have ever seen. And it is for this reason that this tutorial will be fai fairl rly y short. short. The The real learni earning wi will come come from from the the nex nextt tut tutori orial al on how how to to use use All Allegro egro in in a gam game. e. How is this more than restating the manual? Well basically a lot of areas are pieced together where they need to be. The bulk bulk of new info comes comes from from the the Learn Learniing All Allegro egro secti section, whi which ch basical basicallly are random random tips tips of what what to to learn learn,, and and thi things I don't feel the documentation covers well or points out. This tutorial applies to the latest Allegro WIP (as of 7/9/2000). The The latest Allegro library needs to be installed, and can be found at: http://www.talula.demon.co.uk/allegro/ http://www.talula.demon.co.uk/allegro/

Starting Allegro First thing is to include the header file: #include

Before doing anything with Allegro, you must initalize it: alleg_init() alleg_init (); ; wi ki .all eg r o.cc/index.php?ti tle= All eg r o_4_Tutor i al &pr i ntabl e=yes

1/7

08/05/13

Allegro 4 Tutorial - Allegro Wiki

Before initializing other functions, it is best to setup the current .CFG file, which is created by Allegro's included setup program, or by your program. It defaults to allegro.cfg, but if you want to change it to the name of your application/game, use this command: set_config_file("myapp.cfg");

If you want timing functions, or use the mouse/music/movies/etc which require the timing functions, install the timer. This is very important to keep your program running the same speed on all computers. install_timer();

Next if you want to install the keyboard, do so now: install_keyboard();

While Allegro has the keyboard, none of the C library commands will work on the keyboard. Next step is installing the mouse, if needed, returns 0 on error (no buttons): int buttons = install_mouse();

This returns the number of buttons on the mouse. The left button is #0, right is #1, and middle button is #2. This is important when detecting which button is pressed. If you want the joystick, install it (returns non-zero on error): if (install_joystick(JOY_TYPE_AUTODETECT)) { allegro_message("Joystick Error: %s" , allegro_error ); return 1; //exit to DOS }

All of the different joysticks are listed in the Allegro docs, but autodetect will pull info from the .CFG file if loaded, or it will pick a generic joystick type. Allegro_error is a global char* which contains an error message from most functions when the give an error. If you want sound drivers, install them now: if(install_sound(DIGI_AUTODETECT, MIDI_AUTODETECT, NULL)) { allegro_message("Sound Error: %s" , allegro_error ); return 1; }

If you don't want sound or MIDI music, replace the driver name with DIGI_NONE or MIDI_NONE, respectively. The NULL parameter refers to a char*, which was an old feature in Allegro, and is only there for compatability now. Nothing you put in there will have any effect. At this time you may also wish to set the volume levels, which could come from the .CFG file (this discussed later in the tutorial): set_volume(255 , 255); //digital and music to max levels

wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

2/7

08/05/13


The last thing you do is initialize graphics. This is because the other functions will output text mode errors, which cannot be displayed in graphics mode. Another good reason for this is that if a problem occurs, video is most likely the incompatable part. The first thing to do is set the color depth, and the screen size. I strongly recommend that the screen size be placed in constants in alleg.h or some global include file -- this has the advantage of being able to change these 2 constants and never having to change any code, and the application will adjust, if you base all your calculations on these constants, so you can have on-the-fly resolution changes. set_color_depth(8); //256 color mode (8 bits mode) //in a global file, scrx is: const int scrx = 640; //in a global file, scry is: const int srcy = 480; if (set_gfx_mode(GFX_AUTODETECT, scrx, scry, 0, 0)) { printf("Video Error: %s" , allegro_error ); //screen would still be in text mode on error return 1; }

You could also support multiple screen modes (for example if a card didn't support a certain resolution or color depth) by nesting if statements like the one above, to test all acceptable modes. Now Allegro is set up and ready to go. Remember to add the line END_OF_MAIN() right after your main functions ending brace.

Learning Allegro The Allegro documentation is written so well that it would be hopelessly redundant trying to write a tutorial for all of its hundreds of functions. So basically this section here is some Allegro tips on where to start playing around with Allegro and what methods I found to be good, and what I found that sucked. More advanced issues working with Allegro are in the game tutorial. The first thing to do for learning Allegro is getting some cool graphics and musics off the net to play around with. Then try making a few small projects with Allegro, such as: A ball screensaver project -- create a bouncing ball, start with a drawn circle, then move to a .bmp file of a better ball (perhaps a beach ball) and bounce that. If you want to expand the project some more, have a MIDI file play in the background, or have a sound effect (.wav file) when the ball hits the sides. If you want to get really fancy, add in some keyboard controls and gravity to the ball and let the user "nudge" the ball in directions, using geometric vectors, sin and cos to calculate the position.

Allegro Tips A few random raves that the Allegro docs don't cover, plus what to waste your time on, and what to certainly not even try. . . I see sooooo many Allegro programmers not using these features and they are the best in there, espically from a user point of view. Use datafiles whenever you can. There is nothing more annoying to me than having 100s of little .BMP files taking up valuable slack space on the hard drive, slowing it down. Datafiles are compressed and can knock those .BMPs to 1/4 o their size! Plus it's a lot faster to program since they load into an array -- no need to type in all the filenames into load_bitmap()! Also on this issue, use the packfile functions to read and save everything you do (with the exception of .CFG files of course.) They take no time to learn since they perfectly emulate the C-style file functions, and give all the benefits of wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

3/7

08/05/13


compressed data. Although this is a very controversial subject in today's Pentium II and Pentium III world, fixed numbers might be something to consider when using them in a game, where floating accuracy is not needed. This has the advantage of using integer math. If you ever plan to run your game on a 486, definately use these, and also fixed point is VERY friendly to AMD and Cyrix processors. On the latest processors, though, double precision floating point variables were tested to be faster than fixed point (see fixtest.cpp for the test results). Also Allegro fixed point trig is fairly inaccurate and is noticeable over a distance of more than 200 pixels or so. I recommend using double type variables if you are planning on running the program on "today's" computers. I've never used the 3D routines on Allegro. I would think you would be wasting your time. If you really want to do 3D, move to Windows and do Direct3D and OpenGL. The only good reason I could see for doing this would be to make some simple 3D rotating logo perhaps on the title screen or something small like that. I wouldn't base an application off the 3D functions. I would say the same thing about GUI. If you look at the GUI in my Project V2143 game, you will see that it looks nice, but I will warn you that I've spend literally 3x as much time on that GUI as I did on the game. I could probably do it in Windows in 1/4 of the time. If you want a GUI-heavy application, use Windows. It's not worth the trouble. I really should have made the map editor in Windows. . . Learn from my mistake. RLE sprites and compiled sprites are usually not worth the trouble, since their speed boost is exteremely small. This boost may increase on lower class machines, but I haven't seen any yet. Read the FAQ on making screenshots. For some reason I've seen a lot of Allegro programmers saying they can't do screenshots yet. It's just a simple one-line statement that works anywhere anytime: save_bitmap("screen.pcx" , BUFFER, pal );

Where BUFFER is the BITMAP* to your double buffer, and pal is the current pallete (use a dummy pallette if in truecolor mode.) Even if you aren't double buffering you can still save the screen. And by the way, a final note about the BUFFER. Usually you don't draw directly to the screen. Use a technique like double buffering where you draw everything to a buffer then draw the buffer to the screen to eliminate flicker and increase speed. Dirty rectangles is also a good variation of double buffering which draws only changed areas to the screen.

Sample Code This sample program was made and tested under both MSVC and DJGPP using the latest Allegro WIP as of 7/9/00. It displays Hello World!!! in the middle of the screen in yellow with a blue background then waits for a keypress. Many other examples can be found in Allegro's examples directory. If you have seen Allegro 3.1 you may notice some differences from the code you are used to seeing. The function allegro_message works like printf but works under environments like Windows in the form of a pop-up box, since they have no default text output. In GUI environments the set_window_title function sets the window's title. Each hicolor and truecolor depth is tested since different cards support different depths. For example my Voodoo3 card supports 24 but not 32 in VESA but 32 and not 24 under Windows. 15 and 16 bit color depths have roughly the same amount of colors and 24 and 32 bit color depths have the same amount of colors. The makecol function takes red, green, and blue components to form a color. See the Allegro documentation for detailed explanations of all of these functions. #include wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

4/7

08/05/13


const int scrx = 640 ; const int scry = 480 ; int main(int argc, char* argv[]) { if (allegro_init() != 0) { allegro_message("Cannot initalize Allegro. \n "); return 1; } //Set the window title when in a GUI environment set_window_title("Hello World" ); if (install_keyboard()) { allegro_message("Cannot initalize keyboard input. \n "); return 1; } //set graphics mode, trying all acceptable depths set_color_depth(32); if (set_gfx_mode(GFX_AUTODETECT, scrx, scry, 0, 0)) { set_color_depth(24); if (set_gfx_mode(GFX_AUTODETECT, scrx, scry, 0, 0)) { set_color_depth(16); if (set_gfx_mode (GFX_AUTODETECT, scrx, scry, 0, 0)) { set_color_depth(15); if (set_gfx_mode (GFX_AUTODETECT, scrx, scry, 0, 0)) { allegro_message("Video Error: %s. \n ", allegro_error ); return 1; } } } } //set text background color to bright blue text_mode(makecol(0, 0, 255 )); //prints yellow "Hello World!!!" in middle of screen textout_centre(screen, font, "Hello World!!!" , scrx/2, scry/2, makecol(255, 255, 0)); //Wait for a key to be pressed while (!keypressed ()) {} return 0; //Allegro will automatically deinitalize itself on exit } END_OF_MAIN()

Eliminating Overhead If you needing to cut down on your DOS executable size, adding the following code will reduce the EXE size. This code uses preprocessor statements to keep your code Allegro multi-platform compatable. Note this will only work on the statically linked Allegro versions (currently only DOS). #ifdef ALLEGRO_DJGPP BEGIN_GFX_DRIVER_LIST GFX_DRIVER_VBEAF // GFX_DRIVER_VGA // GFX_DRIVER_MODEX GFX_DRIVER_VESA3 GFX_DRIVER_VESA2L GFX_DRIVER_VESA2B // GFX_DRIVER_XTENDED wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

5/7

08/05/13


GFX_DRIVER_VESA1 END_GFX_DRIVER_LIST BEGIN_COLOR_DEPTH_LIST // COLOR_DEPTH_8 COLOR_DEPTH_15 COLOR_DEPTH_16 COLOR_DEPTH_24 COLOR_DEPTH_32 END_COLOR_DEPTH_LIST BEGIN_DIGI_DRIVER_LIST END_DIGI_DRIVER_LIST BEGIN_MIDI_DRIVER_LIST END_MIDI_DRIVER_LIST BEGIN_JOYSTICK_DRIVER_LIST END_JOYSTICK_DRIVER_LIST #endif

This code is written for the sample program above. Comment out the drivers you are absolutely certain you are not using. You must be careful with this because if you attempt to use a driver not listed, your program will crash. Usually you will either comment out all of the VGA drivers (as done above) or all of the SVGA drivers if using VGA modes. Comment out the unused color depths -- be sure to support both 15 and 16 together (hicolor) and 24 and 32 together (truecolor) since they are compatable color depths and some cards will support 24 and not 32, 16 but not 15, or vice versa. For the DIGI, MIDI, and joystick drivers if you are not using one of these parts of Allegro make an empty driver block, or do not make a block to support all drivers if you will be using them. For all driver blocks, the drivers are detected starting from the top and working down until one works, so you can also reorder Allegro's default detection method. The downfall to this code is that every time a new Allegro is released, you must check the latest driver lists to add new drivers and delete old ones.

Using Microsoft Visual C++ with Allegro I wrote these instructions using MSVC 6.0, and probably work for other MSVC versions too. This section assumes you have never seen MSVC before. Once you install Allegro for MSVC (follow the instructions given with Allegro), you will want to try to create new Allegro programs or port your Allegro 3.x programs to the new WIP, and to do this you will want to create a new project. In the file menu, select new, then click projects tab, select Win32 application, and in the project name box type in the name for your new project. If you wish you may change the location of the created directory in the Location box. Press the OK button. Note for those porting their old projects: it is not necessary for the source code to be in that same directory -- for example if you are working on a project that you want both DOS and Windows executables and you started it in DJGPP, you could leave your source code in the DJGPP directory so both DJGPP and MSVC share the same code, and what you change in MSVC changes in the DJGPP version and vice versa. The next window will ask what kind of application to you want. Select "An empty project" then press the finish button. wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

6/7

08/05/13


If you do not have any source files to add (from a previous Allegro project you wish to port to Windows), select the new option from the file menu. Select the files tab. From here you can create C++ source and header files, as well as other files which you will probably not create while using Allegro. To create a file select the appropiate file from the list on the left, type in a file name, and press OK. By default the file will be added to your newly created project If you are porting a program and already have the source code, you can add your code in the Project menu. Select Add To Project > Files, then locate your source files and add them. Remember you can drag a box and use the shift to select multiple files just like other Windows file dialogs. You should add all of your C/C++ source files and your headers as well. Although adding the headers is not required, adding them makes it easy to click on the file in the project to edit it. You can add any other file type as well, for example a readme.txt file or a Word document, for quick editing. The left pane has the class view, which when you add your C++ files you can get a chart of all your classes and their data members and methods which you can double click to see/edit, a very valuable feature when using C++. You can click the tabs below to see files, resources, and a help window. Click on the FileView tab to see the source you added. Use the above tree to navigate the files in your project -- double click to edit. If you are porting your program from Allegro 3.x, there are a few changes you need to make, which are mentioned in the Allegro documentation. Once you make these changes your program will compile under any compiler supported by Allegro. Once you have your source code in MSVC, you will want to set up your project to compile for Allegro. In the project menu select settings. In the Settings For box make sure Win32 Debug is selected. Make sure your project's name is highlighted in the tree box below by clicking on it, then click on the Link tab. In the Object/library modules textbox add "alld.lib" to the end of the list (do not type the quotes). Lastly, change the Settings For box to Win32 Release and add "alleg.lib" to the end of the Object/library modules list and press OK. To compile your program press the build button on the toolbar (shortcut F7). The message window at the bottom will show any errors and warnings -- double click on a line to be shown the error to be fixed. After all errors are fixed press the build again until the EXE builds (It will show 0 errors and warnings if it worked). To run your program press the the execute button which looks like an exclaimation point (shortcut Shift-F5) to run the program. If you want to run the program in debugging mode press the button next to it, the "Go" button (shortcut F5). Common debugging functions are shown on the debugging menu. NOTE: The MSVC debugger cannot be used if your program is running in full-screen DirectX mode. Change your graphics driver to GFX_DIRECTX_WIN or GFX_DIRECTX_OVL if your card supports it, else use GFX_GDI which is unfortunately much slower. You obviously will also need to have your desktop in a higher resolution than your game if you intend to see other windows. After your program is complete and you want to distribute it, you will want to compile the program in release mode. Note that release mode only works on the Professional and Enterprise editions of MSVC; MSVC standard does not have an optimizer and only runs in debugging mode. In the Build menu pick "Set Active Configuration" and pick the release mode for your project and rebuild your project as before. You will find the release and debug EXE files in the Release and Debug directories in your main project's directory.

Credits This article was originally written by Jason Winnebeck. It may have been modified since its addition to the wiki. Retrieved from "http://wiki.allegro.cc/index.php?title=Allegro_4_Tutorial" Category: Allegro 4 Tutorials This page was last modified on March 7, 2013, at 05:53. wiki.allegro.cc/index.php?title=Allegro_4_Tutorial&printable=yes

7/7

Allegro 4 Tutorial - Allegro Wiki

Recommend Documents