API 6a Camerron Training

A Cameron Introduction to American Petroleum Institute Specifications API 6A (ISO 10423): Specification for Wellhead and Christmas Tree Equipment Equ ipment API Q1: Specificatio Specificationn for Quality Quality Progra Programs, ms, the API API Monogram Program and ISO-9000 Accreditations. Cameron Locations

POLICY The Cameron Division of Cooper Cameron Corporation supports the development and use of international product standards such as those published by API and ISO. These standards provide a common basis for product characteristics and performance attributes and act to capture the successful industry history associated with these products. Products marketed, designed, manufactured and used in compliance with recognized industry standards add significant value to our industry. Cameron endorses the API monogram program and API Quality Program Specification Q1. API Q1 applies the recognized benefits of the ISO 9001 Quality Program elements tailored specifically to the oil and gas industry. The API monogram program joins the assessment of Quality programs with the demonstrated ability to comply with international product standards such as API Specification 6A (ISO 10423) for Wellhead and Christmas Tree Equipment.

© CAMERON, P.O, Box 1212, Houston TX, 77251-1212, Tel: 713.939.2211 Fax: 713.939.2620, http://www.camerondiv.com

Specification for Wellhead and Christmas Tree Equipment

API SPECIFICATION 6A

API Specification 6A (ISO 10423) is the recognized industry standard for

Wellhead and Christmas Tree Equipment which was formulated to provide for the availability of safe, dimensionally and functionally interchangeable Wellhead and Christmas Tree Equipment. This specification includes detailed requirements for the manufacture of tubular suspension equipment, valves and fittings used at the location of oil and gas wells to contain and control pressure and fluid flows. Specification 6A also serves as the reference source for the design of flanged end and outlet connections for use at 2,000 to 20,000 psi maximum rated working pressures and a family of gate valves for use over these same pressure ranges. API Specification 6A is also specified as the base standard for manufacture of subsea equipment in accordance with API Specification 17D. The current edition of API 6A, includes requirements for Surface Safety Valves (SSV) and Underwater Safety Valves (USV).


EQUIPMENT

API Specification 6A (ISO 10423) covers Wellhead and Christmas Tree Equipment as follows: Wellhead Equipment

Connectors and Fittings

Casing & Tubing Hangers

Valves and Chokes

Loose Connectors

Other Equipment

Casing Head Housing

Crossover Connectors

Mandrel Hangers

Single Completion Valves

Weld Neck Connectors

Actuators

Casing Head Spools

Tubing Head Adapters

Slip Hangers

Multiple Completion Valves

Blind Connectors

Ring Gaskets

Tubing Head Spools

Top Connectors

Actuated Valves

Threaded Connectors

Crossover Spools

Tees and Crosses

Valves Prepared for Actuators

Adapter and Spacer Connectors

Multistage Head Housing & Spools

Fluid Sampling Devices

Check Valves

Adapter and Spacer Spools

Chokes

Other End Connectors (Proprietary)

SSV/USV & Actuators for Offshore Services

Bull Plugs Running Tools Valve Removal Plugs Wear Bushings


PRODUCT SPECIFICATION LEVELS (PSL’s)

API Specification 6A (ISO 10423) provides definition of standard service conditions and introduces the concept of product specification levels (PSL’s) which will be referred to throughout the document. The PSL’s define different levels of effort, or levels of technical requirements which may be specified for a product. Generally, these levels represent industry practice for various service conditions. The decision tree shown below is designed to assist the purchaser in selecting the proper specification levels (PSL’s) for primary parts of Wellhead and Christmas

Tree Equipment. START HERE

RATED WORKING PRESSURE ≥103.5 MPa (15,000 PSI)

YES

HIGH H2S CONCENTRATION ?

NO

YES

PSL-3G

NO YES

PSL-3G

GAS WELL

NO

PSL-3

> 34.5 MPa (5,000 PSI ) YES

YES HIGH H2S CONCENTRATION ?

NACE ?

YES RATED WORKING PRESSURE

GAS WELL

NO NO

NO ≤

34.5 MPa (5,000 PSI )


GAS WELL

> 34.5 MPa (5,000 PSI)

≤34.5

NO

RATED WORKING PRESSURE

> 34.5 MPa (5,000 PSI)

≤

> 34.5 MPa (5,000 PSI)

MPa (5,000 PSI)

34.5 MPa (5,000 PSI)

PSL-3G PSL-3 PSL-2 PSL-3 PSL-2 PSL-2 PSL-1


GAS WELL

NO ≤

34.5 MPa (5,000 PSI)

PSL-3 PSL-2 PSL-1


PRESSURE RATINGS

Six pressure ratings from 2,000 to 20,000 psi represent the maximum working pressure of the equipment.

API Pressure Rating in PSI

API Pressure Rating in MPa

2,000

13.8

3,000

20.7

5,000

34.5

10,000

69.0

15,000

103.5

20,000

138.0

TEMPERATURE CLASSES Eight Temperature Classes, each of which represent a range of temperatures from the minimum ambient air temperature to the maximum temperature of the well fluid passing through or contained by the equipment. API TEMP. CLASSIFICATION

OPERATING RA NGE (DEG. F) (MIN.) (MAX.)

OPERATING R ANGE (DEG. C) (MIN.) (MAX.)

K

-75

TO

180

-60

TO

82

L

-50

TO

180

-46

TO

82

P

-20

TO

180

-29

TO

82

R

ROOM TEMPERATURE

ROOM TEMPERATURE

S

0

TO

150

-18

TO

66

T

0

TO

180

-18

TO

82

U

0

TO

250

-18

TO

121

V

35

TO

250

2

TO

121

Note: These temperature classes can be used in combination with one another to achieve a wider rating. For instance, a common rating for 6A gate valves is P+U (-20 to 250 ° F).


MATERIAL CLASSES

There are seven Material Classes which specify minimum material requirements for general or sour service shown below. API 6A (ISO 10423) equipment must be designed, tested and marked as satisfactory for one of these Material Classes.

Minimum Material Requirements API Material Class

Body, Bonnet, End & Outlet Connections

Pressure Controlling Parts, Stems, & Mandrel Hangers

AA - General Service

Carbon or low alloy steel


BB - General Service


Stainless steel

CC - General Service

Stainless Steel

Stainless Steel

DD - Sour Servicea

Carbon or low alloy steel b


EE - Sour Service a


Stainless steel b

FF - Sour Servicea

Stainless steel b

Stainless steel b

HH - Sour Servicea

Corrosion Resistant Alloy b

Corrosion Resistant Alloyb

aAs defined by National Association of Corrosion Engineers (NACE) Standard MR0175 bIn compliance with NACE Standard MR0175 Only the most stringent classification is marked.

ANNEX F TESTING Performance verification testing is often performed on prototypes or production models of API Specification 6A (ISO 10423) equipment to ensure that the performance requirements (PR’s) specified for pressure, temperature, load, mechanical cycles, and standard test fluids are met in the design of the product. Performance Verification Testing may include: Pressure/Temperature Cycles Load/Mechanical Cycles Nonmetallic Seal Thermochemical Testing Scalable Performance Verification levels (i.e. PR1, PR2) are applicable to many API 6A products. Although Annex F Testing is not a requirement in API 6A, Cameron is proud to offer a wide variety of products proven to meet, and often exceed the performance verification requirements of API 6A Annex F. © CAMERON, P.O, Box 1212, Houston TX, 77251-1212, Tel: 713.939.2211 Fax: 713.939.2620, http://www.camerondiv.com

WELDING

Quality control requirements for welding generally increase as the PSL level increases from 1 through 3 with each level building on the level below it. No welding is permitted on PSL-4 equipment except for corrosion resistant alloy overlays. The following table applies to pressure containing fabrication and repair weldments for bodies, bonnets, and end and outlet connections:

PSL-1

PSL-2

PSL-3

Same as PSL-1 plus Same as PSL-2 plus Chemical Analysis Base Metal and PWHT Controls Grouping

Weld Procedure Qualification

ASME SECT. IX With Hardness Survey

Welder Performance Qualification

ASME SECT. IX

Same as PSL-1 plus Hole Qualification

Same as PSL-2

Welding Consumables, Instrument Calibration

Documented Controls Required

Same as PSL-1

Same as PSL-1

Visual Exam of Weld

_

Required

Required

Weld Surface NDE: PT/MT

_

Required

Required

Weld Volumetric NDE: UT/RT

Weld Hardness Testing

_

_

Required For All Fabrication Welds and Repair Welds >25% of Wall _

PSL-4 No Welding Allowed Except for Corrosion Resistant Alloy Overlays

Required For All Fabrication Welds and Repair Welds >20% of Wall Required

No Welding Allowed Except for Corrosion Resistant Alloy Overlays


QUALITY CONTROL

Specification 6A (ISO 10423) describes pertinent information on inspections, tests, examinations, and required documentation. Since the selection of Product Specification Level (PSL) is ultimately a purchaser’s decision, quality control information is provided to make it easy for users to select the PSL level consistent with their risk management needs.

Quality Control Requirements for Equipment

Requirements

PSL-1

PSL-2

PSL-3

PSL-3G

PSL-4

Drift Test

Yes

Yes

Yes

Yes

Yes

Hydrostatic Test

Yes

Yes

Yes, Extended

Yes, Extended

Yes, Extended

Gas Test

_

_

–

Yes

Yes

Assembly Traceability

_

_

Yes

Yes

Yes

Serialization

_

Yes

Yes

Yes

Yes


QUALITY CONTROL

Quality Control Requirements for Bodies, Bonnets, and End and Outlet Connections

Requirements

PSL-1

PSL-2

PSL-3

PSL-4

Tensile Testing

Yes

Yes

Yes

Yes

Impact Testing

K, L

K, L, P

Yes

Yes

Hardness Testing

Sampling

Single

Multiple

Multiple

Dimensional Verification

Sampling

Sampling

Yes

Yes

Traceability

_

Yes

Yes

Yes

Chemical Analysis

_

Yes

Yes

Yes

Visual Examination

Yes

Yes

_

_

Surface NDE

_

Yes

Yes

Yes

Weld NDE

_

Yes

Yes

Yes

Serialization

_

_

Yes

Yes

Volumetric NDE

_

_

Yes

Yes

Definitions: End and Outlet Connections - Integral threads, male or female; flanges, studded or through-bolted; or any other means used to join together equipment that contains or controls pressure. Body - Any portion of API Spec 6A equipment between end connections, with or without internal parts, which contains well-bore pressure. Bonnet - A pressure-containing closure for a body, other than an API end or outlet connection.


MARKINGS

Section 8 of Specification 6A and the chart below describe marking instructions for equipment. The marking requirements include the following: CC-OKC

API

Manufacturer‘s Mark

13–5/8"

5000 PSI

Nominal Size

Monogram

S

AA

PR2

Product Specification Level

Temperature Class

Rated Working Pressure

1

Material Class

6-01

Date of Final Acceptance

Performance Requirement Level


HOW TO ORDER EXHIBIT A1 – GENERAL WELLHEAD EQUIPMENT DATA SHEET

The following data sheet is included as a worksheet for assembling information needed to place an order: Well name(s) and location(s): __________________________________________________________________ Maximum operating pressure: __________________________________________________________________ Anticipated wellhead shut-in pressure: __________________________________________________________ Temperature ranges anticipated: ________________________________________________________________ Minimum ambient temperature: ________________________________________________________________ Maximum flowing fluid temperature at wellhead: ________________________________________________ Anticipated composition of produced fluids: CO2 __________ ppm ___________ Chlorides ________ppm ___________________________H 2S ______________ppm ______________ Other ______________ Anticipated completion or future workover or recovery operations which would affect pressure, temperature, or fluid content __________________________________________________________________ New values: _________________________________________________________________________________ Are there any government regulations that will apply or must be met by this equipment? _______________ If so, which one(s)? __________________________________________________________________________ Water or brine pH: Does NACE MR0175 apply? Will scale, paraffin, corrosion, or other types of inhibitors be used? __________________________________ Inhibitor type: _______________ Inhibitor carrier: _______________ Batch or continuous inhibition? ______ Will acidizing be performed? ________________________________ Type of acid: ______________________ Anticipated production rates: ______________________ M 3 /D oil/condensate ______________________ M 3 /D gas ______________________ M 3 /D S&W Will erosion be concern? ____________________ Cause: __________________________________________ External coating? Yes, Type _________________________ No _________________ Internal coating? Yes, Type__________________________No _________________ Delivery requirements: ________________________________________________________________________ ____________________________________________________________________________________________ Special shipping, packing and storage instructions: ________________________________________________ Casing Program Top Joint String

Conductor Surface Csg. Protective Csg Production Csg. Tubing

Size (OD)

Wt., Kg/m (lb/ft)

Grade

________ ________ ________ ________ ________

________ ________ ________ ________ ________

________ ________ ________ ________ ________

Connection

________ ________ ________ ________ ________

Total String Hanging Wt. in DaN (lbs)

Bit Size in mm (in)

________ ________ ________ ________ ________

________ ________ ________ ________ ________

Type of Completion: single or multiple: ________________ Technical contact in buyer’s organization: ________________________________________________________ Phone: ________________________________________________________

For more information, contact your local Cameron representative. Cameron, P.O. Box 1212 • Houston, TX 77251-1212 • Tel: (713)939-2211 • FAX: (713) 939-2620 http://www.camerondiv.com

API Q1: Specification for Quality Programs, the API Monogram Program and ISO-9000 Accreditations.

.

API SPECIFICATION Q1

OVERVIEW API Q1 is intended to be used in conjunction with international oil and gas product standards by internationally licensed manufacturers. Used in this manner, API Q1 delivers significant value to the industry by providing a cohesive link between the accreditation of a manufacturer’s quality system with their ability to provide products meeting industry and customer requirements. API Specification Q1 differs from generic quality systems, (e.g., ISO 9000 Series), by its role in the voluntary licensing of manufacturers to provide oil and gas industry products in accordance with API specifications. API licenses are only issued after an on-site survey has confirmed that the licensee adheres to the requirements of both the quality system standard API Q1 and the requirements of an international oil and gas product specification recognized by the oil and gas industry and API. In contrast, generic quality system requirements are normally intended to be applied to any industry or product through contractual agreements with or without industry standards or specifications.

Typical Quality Program Elements (API Q1) 1 2 3 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

SCOPE REFERENCES DEFINITIONS QUALITY SYSTEM REQUIREMENTS MANAGEMENT RESPONSIBILITY QUALITY SYSTEM ORDER REVIEW DESIGN CONTROL DOCUMENT AND DATA CONTROL PURCHASING PURCHASER-SUPPLIED PRODUCT MATERIAL/PRODUCT IDENTIFICATION AND TRACEABILITY 4.9 PROCESS CONTROL 4.10 INSPECTION AND TESTING

4.11 INSPECTION, MEASURING, AND TEST EQUIPMENT 4.12 INSPECTION AND TEST STATUS 4.13 CONTROL OF NONCONFORMING PRODUCT 4.14 CORRECTIVE ACTION 4.15 HANDLING, CLEANING, STORAGE, PACKAGING, AND DELIVERY 4.16 QUALITY RECORDS 4.17 INTERNAL QUALITY AUDITS 4.18 TRAINING, INDOCTRINATION, AND QUALIFICATION 4.19 SERVICING 4.20 STATISTICAL TECHNIQUES

Typical Quality Program Elements (ISO 9001 – 2000) 1 2 3 4 5 6 7 8

SCOPE NORMAL REFERENCES TERMS AND DEFINITIONS QUALITY SYSTEM REQUIREMENTS MANAGEMENT RESPONSIBILITY RESOURCE MANAGEMENT PRODUCT REALIZATION MEASUREMENT, ANALYSIS AND IMPROVEMENT


API and ISO ACCREDITATIONS

Cameron is proud to maintain API and ISO accreditations at our manufacturing and repair facilities. In fact, Cameron holds the largest number of API licenses in the industry. These accreditations, however, only make up a part of Cameron’s commitment to quality. We invite you to contact your local Cameron representative and review our commitment to quality in detail.

Plant Locations

Brookshire Edmonton (CC) Edmonton (CCV) Houston–Actuators Houston–Controls Liberty Little Rock Livingston, TX Maracaibo (CC) Oklahoma City (CCV) Oklahoma City (CC) Patterson Sao Paulo Veracruz Ville Platte Zarate

API 6A Wellhead & Xmas Trees

API 6D Ball Valves

API 16A Drill Through Equipment

API 16C Drilling Chokes

API 16D Controls

API 16R Marine Drilling Riser Couplings

API 17D Subsea Equipment

Western Hemisphere 0126 0086.3

0418.5

ISO

ISO 9001 ISO 9001

0244.5 0506

0014 0012

0418

0042.27 0418.2 0418.13 0418.3

0244 0073 0276

Aberdeen Beziers 00418.9 Celle 00418.19 Hoogezand Leeds 0418.10 Livingston, Scotland Longford 00418.20 Randaberg, Norway 0418.22

0001

0086.9 0244.2 0244.10 0244.3

0148.8 0418.7

0086

0022 0015 0028

0086.1

0006.1

0007.1

0121.8 0244.4 0244.7

00244.8

0086.5 Eastern Hemisphere 0086.6 0086.8

0006 0006

0086.7

0007.4 0007.6 0007.5

0291 0007.7

ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9002 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9001 ISO 9002 ISO 9001 ISO 9001 ISO 9001 ISO 9001

Asia Pacific / Middle East

Batam 0223 Darul, Malaysia 0418.12 Deer Park, Victoria 0042.18 Australia Oman Singapore

0244.9 0014.9

0000 0007.8

ISO 9002 ISO 9002

0001.6

ISO 9001

0516 0418.6

ISO 9002 0244.6

0086.4

0007.3

ISO 9001


CAMERON LOCATIONS

LOCATIONS

DOMESTIC Alaska 600 East 57th Place Anchorage, Alaska 99518-5761 Phone: (907) 562-2332 Fax: (907) 562-3880 California 3004 Jewett Ave. Bakersfield, California 93301 (P.O. Box 3545, Bakersfield, CA 93385) Phone: (661) 323-8183 Fax: (661) 323-0946 418 Baylor Drive Woodland, California 95695 Phone: (530) 668-8069 Fax: (530) 688-0948

Colorado 1660 Lincoln, Suite 2950 Denver, Colorado 80264 Phone: (303) 861-1850 Fax: (303) 861-1868 710 23-1/4 Road Grand Junction, Colorado 81505 Phone: (970) 241-5711 Fax: (970) 241-5730

Louisiana Highway 182 Berwick, Louisiana 70342 (P.O. Box 457, Berwick, LA 70392) Phone: (985) 395-6171 Fax: (985) 395-1257 650 Poydras St. Poydras Center, Suite 2310 New Orleans, Louisiana 70130 Phone: (504) 529-7634 Fax: (504) 522-8837 Highway 90 East Patterson, Louisiana 70392 (P.O. Box 457, Patterson, LA 70392) Phone: (985) 395-6171 Fax: (985) 395-1257 10361 Meadowview Keithville, Louisiana 71047 (P.O. Box 18978, Shreveport, LA 71138) Phone: (318) 925-6200 Fax: (318) 925-5040

Mississippi 1020 Hillcrest Drive Laurel, Mississippi 39440 (P.O. Box 3039, Laurel, MS 39442) Phone: (601) 649-8900 Fax: (601) 649-8909 New Mexico 503 South Behrend Ave. Farmington, New Mexico 84701 Phone: (505) 327-3402 Fax: (505) 327-0454

500 North Leech Hobbs, New Mexico 88240 Phone: (505) 397-1325 Fax: (505) 393-5957

Oklahoma 4341 S.W. 33rd Street Oklahoma City, Oklahoma 73119 Phone: (405) 682-1661 Fax: (405) 682-1051 7500 S.W. 29th Street Oklahoma City, Oklahoma 73179 (P.O. Box 75308, Oklahoma City, OK 73147) Phone: (405) 745-2715 Fax: (405) 745-4071

Texas 6441 I.H. 37 Corpus Christi, Texas 78409 Phone: (361) 289-1455 Fax: (361) 289-6251 1600 Pacific Place, Suite 1575 Dallas, Texas 75201 Phone: (214) 855-7823 Fax: (214) 855-0033 13013 Northwest Freeway Houston, Texas 77040 (P.O. Box 1212, Houston, TX 77251-1212) Phone: (713) 939-2211 Fax: (713) 939-2620 6650 Bingle Road Houston, Texas 77092 (P.O. Box 1212, Houston, TX 77251-1212) Phone: (713) 683-4600 Fax: (713) 683-4729 6750 Bingle Road Houston, Texas 77092 (P.O. Box 1212, Houston, TX 77251-1212) Phone: (713) 369-4100 Fax: (713) 369-4128 9220 Taub Road Houston, Texas 77064 (P.O. Box 1212, Houston, TX 77251-1212) Tel: (281) 897-8500 Fax: (281) 897-8789 10810 NW Freeway Houston, TX 77092 (P.O. Box 1212, Houston, TX 77251-1212) Phone: 713-354-1200 Fax: 713-354-1255 29501 Katy Freeway Katy, Texas 77494 Phone: (281) 391-4600 Fax: (281) 391-4640 Highway 90 @ FM 1909 Liberty, Texas 77575 (P.O. Box 10286, Liberty, TX 77575) Phone: (936) 336-8811 Fax: (936) 336-2822

LOCATIONS Texas (continued) 2705 E. Marshall Ave. Longview, Texas 75602 (P.O. Box 1311, Longview, TX 75606) Phone: (903) 236-4884 Fax: (903) 234-0336 306 W. Wall, Suite 1310 Midland, Texas 79702 Phone: (915) 682-4688 Fax: (915) 682-4692 270 S. Grandview Odessa, Texas 79761 Phone: (915) 337-5475 Fax: (915) 337-3001

Utah 1442 E. Highway 40 Vernal, Utah 84078 (P.O. Box 492, Vernal, UT 84078) Phone: (435) 781-0434 Fax: (435) 789-5656 Wyoming 7048 Zero Road Casper, Wyoming 82604 (P.O. Box 2229, Casper, WY 82644) Phone: (307) 472-0222 Fax: (307) 265-1318 102 Foothill Blvd. Rock Springs, Wyoming 82901 Phone: (307) 382-3134 Fax: (307) 382-3190

International ALGERIA Zone Industrielle Intersection rue Desserte #10 Hassi Messaoud, Algeria Tel: 213-9-73-91 Fax: 213-9-73-74-27 ANGOLA Rua Major Kanhanguio No. 90 Luanda Republic of Angola Phone: 244-2-33-13-19 Fax: 244-2-39-04-36 ARGENTINA Maipu 971, Piso 1 DTO “D” 1006 Buenos Aires, Argentina Phone: 54-11-4-314-5520 Fax: 54-11-4-311-2838

Lot 1 Ballarate Road Deer Park Vic St. Albans 3021 Victoria, Australia (P.O. Box 789) Phone: 61-3-9361-4444 Fax: 61-3-9361-4400 45-47 Colin Street West Perth, 6005 Western Australia (P.O. Box 94, West Perth 6872) Phone: 61-08-9226-1444 Fax: 61-08-9226-1555

BAKU 37 Boyuk Gala Street Old City Baku 370004 Azerbaijon Phone: 994-12-974606 Fax: 994-12-974616 BRAZIL Rod Amaral Peiscoto, KM 164,5 Imboassica MaCae, Rio De Janeiro, Brazil CEP 27920-340 Phone: 55-24-773-6331 Fax: 55-24-773-6322 Av. Rio Branco, 181-Sala 801 Rio de Janeiro – RJ 20040 - 007 Brazil Tel: 55-21-533-4032 Fax: 55-21-524-5051 Avendia Paulista, 2.421-Jardins Sao Paulo - S.P. - Brazil CEP 01311-300 Phone: 55-11-3066-3600 Fax: 55-11-3064-6228 Av. Arcenio Riemma 1451 - Bairro do Una CEP 120300-000 Taubate - Sao Paulo Brazil Phone: 55-12-210-1000 Fax: 55-12-218-2319

Av. Antartida Argentina 2711 2800 Zarate, Argentina Phone: 54-3487-422297 Fax: 54-3487-423404

BRUNEI Lot 4007, Kawasan G22 Simpang 17 Seria, Brunei Darussalam (P.O. Box 177, Kuala Belait 6001) Phone: 673-3-222-613 Fax: 673-3-224-284

AUSTRALIA Lot 1702 McKinnon Road Berrimah Northern Territory 0828 Darwin Phone: 61-8-8931-2034 Fax: 61-8-8931-2036

CANADA 420 Aquaduct Drive Brooks, Alberta T1R 1C4 (Box 1501) Phone: 403-793-2700 Fax: 403-793-2200

LOCATIONS

855 – 42nd Avenue SE Building B Calgary, Alberta T2P 2X6 Phone: 403-261-2800 Fax: 403-262-5181 5003 93rd Street Edmonton, Alberta T6E 5S9 Phone: 780-434-3476 Fax: 780-437-7397 259A Tundra Road Fort St. John, British Columbia V1J 4H6 (P.O. Box 6075) Phone: 250-785-2700 Fax: 250-785-0700 4904 – 48th Avenue Fort Nelson, British Columbia, V0C1R0 Phone: 250-774-7394 Fax: 250-774-7392 11302 – 89th Avenue Grand Prairie, Alberta T8V 5V8 Phone: 780-539-2333 Fax: 780-532-0770 67 Atlantic Street Darmouth, Nova Scotia B2Y 4P4 Phone: 902-461-4444 Fax: 902-461-0493 #9, 4830 – 78th Street Red Deer, Alberta T4P 2B3 Phone: 780-342-2700 Fax: 780-340-0700

CHILE Balfer LTDA Zona Franca P. O. Box 117-D Punta Arenas, Chile Phone: 56-61-213931 Fax: 56-61-214379

15 Avenue du General de Gaulle 64000 Pau France Phone: 33-559-807640 Fax: 33-559-807649 45 Rue Louis Blanc 92400 Courbevoie, France (92038 Paris-La-Defense Cedex Mail) Phone: 33-1471-76059 Fax: 33-1471-76099

GABON B. P. No. 869 Port Gentil Republique Gabonaise Phone: 241-553-026 Fax: 241-555-897 GERMANY Lueckenweg 1 29227 Celle, Germany (P.O. Box 3225) Phone: 49-5141-8060 Fax: 49-5141-806333 INDONESIA c/o P. T. Imeco Jalan Ampera Raya No. 9 & 10 Cilandak Timur Jakarta #12550, Indonesia Phone: 62-21-780-4125 Fax: 62-21-782-2428 PT Kartic Yasa Sarana JL Tenggiri Kav 21 Batu Ampar Batam, Indonesia Phone: 778-412-285 Fax: 778-412-284

IRELAND Aghafad, Longford Republic of Ireland Phone: 353-43-50600 Fax: 353-43-41560

CONGO 45 Rue Louis Blanc 92400 Courbevoie France (92038 Paris-La-Defense Cedex Mail) Phone: 242-945563 Fax: 242-940283

KAZAKHSTAN 80 Maresyer Street Building 2, Apt 25, 41 Kazakhstan Phone: 7-3132-540-615 Fax: 7-3132-542-519

EGYPT Villa el Baraka No. 8 Road 279 New Maadi Cairo, Egypt A.R.E Phone: 202-516-4463 Fax: 202-516-4789

MALAYSIA 2MC, Asian Supply Base Ranca Ranca Industrial Estate Lubuan Federal Territory Malaysia Phone: 60-87-413914 Fax: 60-87-415921

FRANCE Plaine Saint-Pierre, 34535 Beziers Cedex France Phone: 33-467-111500 Fax: 33-467-111600

Lot 1431 Piasall Jaya Industrial Estate 98000 Miri Sarawak East Malaysia Phone: 60-85-657335 Fax: 60-85-656335

LOCATIONS

Lot 58, Jalan Utas 15/7, Kawasan Perusahaan Section 15, 40200 Shah Alam Selangor, Malaysia (P.O. Box 7170, 40707 Shah Alam) Phone: 60-3-5510-8850 Fax: 60-3-5510-4772 Warehouse 5, Door 7A Kemaman Supply Base 24007 Kemaman Terengganu, Malaysia Phone: 60-9-863-1145 Fax: 60-9-863-1410

MEXICO Calle 37 No. 147-A Col. Hector Perez Martinez 24100, C.D. Del Carmen Camp Mexico Phone: 52-938-27924 Fax: 52-938-27924

Ogunu Road P.M.B. 1066 Warri, Nigeria Phone: 871-53-230-512 or 473 Fax: 871-53-230-512

THE NETHERLANDS Sweelinckplein 11 2517GK The Hague, The Netherlands Phone: 31-70-365-7904 Fax: 31-70-364-5941 Produktieweg 14 9601 MA Hoogezand, The Netherlands (P. O. Box 121, 9600 AC) Phone: 31-598-361900 Fax: 31-598-396298

Avendia Homero 1804, Suite 403 Col. Chapultepec Morales 11510 Mexico D.F., Mexico Phone: 52-5-5800296 Fax: 52-5-3958869

NORWAY P. O. Box 66 5346 Agotnes Bergen, Norway Phone: 47-56-322811 Fax: 47-56-334593

Av. Acacias Esq, Av. Ciruelos S/N Cd. Ind. Bruno Pagliai Veracruz, Ver Mexico, C.P. 91697 (P.O. Box MEB-MX17-390) Phone: 52-29-891700 Fax: 52-29-891701

Mekjarvik 1 4070 Randaberg Stavanger, Norway Phone: 47-51-415000 Fax: 47-51-418160

Av. Paseo Tabasco No. 417 Col. Municipal Villahermosa, Tabasco Mexico, C.P. 86090 Phone: 52-93-141755 Fax: 52-93-141755 Carretera a Monterey, KM 104 Reynosa, Tamaulipas Mexico Phone: 52-89-297410 Fax: 52-89-247420

NEW ZEALAND P. O. Box 672 Papakura, Auckland New Zealand Phone: 64-9-299-8103 Fax: 64-9-299-8103 NIGERIA 18B Thompson Avenue Ikoyi, Lagos, Nigeria Phone: 2341-269-4003 Fax: 2341-269-4003 Plot 45 Trans Amadi Ind. Layout P.M.B. 995 Port Harcourt, Nigeria Phone: 234-84-236761 Fax: 234-84-238742

OMAN Road 15 Rusayl Industrial Estate Sultanate of Oman (P.O. Box 130, Postal Code 124) Phone: 968-629156 Fax: 968-626923 GBM Building Level A Al Wallaj Street Qurum Muscat, Sultanate of Oman (P.O. Box 985, Postal Code 112) Phone: 968-562158 Fax: 968-562178

PAKISTAN No 12, Street 12 F-7/2 (P. O. Box 1416) Islamabad Pakistan Phone: 92-51-274952 Fax: 92-51-824141 QATAR c/o Al Ahed Trading and Const. Co. Ltd. P. O. Box 3266 Doha, Qatar Phone: 974-410797 or 835 Fax: 974-411582

LOCATIONS

RUSSIA Per. Sadovskikh, 4 Apt. 12 Moscow 103001, Russia Phone: 7-502-2213422 Fax: 7-502-2213010 SAUDI ARABIA Al Khobar 31952 Saudi Arabia (P. O. Box 31684) Phone: 966-3-893-3333, ext 399 Fax: 966-3-894-6426 SCOTLAND Badentoy Avenue Portlethen Aberdeenshire, Scotland AB1 4YB Phone: 44-1224-282000 Fax: 44-1224-781800 ICS House Badentoy Park Portlethen Aberdeenshire, Scotland AB1 4YA Phone: 44-1224-783500 Fax: 44-1224-783355

SINGAPORE No.2 Gul Circle Jurong Industrial Estate Singapore 629560 Phone: 65-861-3355 Fax: 65-861-6197 THAILAND C-O Level 23, CP Tower 313 Silom Road, Bangruk Bangkok 01500 Thailand Phone: 66-2-231-8320 Fax: 66-2-231-8321 UNITED ARAB EMIRATES c/o Sigma Enterprises Bldg Mussafah Area, 7th Street P.O. Box 3555 Abu Dhabi, U.A.E Phone: 971-2-551-1313 Fax: 971-2-551-0441 P.O. Box 43966 Abu Dhabi, U.A.E. Phone: 971-2-723648 Fax: 971-2-782293

UNITED KINGDOM Units 1 & 2 Boundary Road Harfrey’s Industrial Estate Great Yarmouth, Norfolk England NR31 OLY Tel: 44-1493-440438 Fax: 44-1493-655405 Unit 11, Brinell Way Harfrey’s Industrial Estate Great Yarmouth, Norfolk England NR31 OLU Phone: 44-1493-650675 Fax: 44-1493-650676 Queen Street Stourton Leeds, West Yorkshire England LS10 1SB Phone: 44-113-2701144 Fax: 44-113-2764751 5 Mondial Way Harlington Hayes UB3 5AR London, England Phone: 44-280-9901800 Fax: 44-181-9901888

VENEZUELA Carretera A. Perija KM 7 1/2 Calle 166, No. 49 F-180 Barrio el Silencio Maracaibo, Venezuela 4001-A Phone: 58-261-7312-960 Fax: 58-261-7310-638 Zona Industrial de Maturin Manzana 49, Calle 2 Detras de Vicson Maturin, Monagas, Venezuela Phone: 58-291-6526-412 Fax: 58-291-6516-946 Av. Venezuela, 3er Piso, Oficina 316 Torre America Bello Monte Caracas, Venezuela Phone: 58-212-707-6403 or 6404 Fax: 58-212-762-1379 Urb. Canaima, Calle F, Casa 29-F Punta de Mata, Monagas, Venezuela Phone: 58-292-2370-014 Fax: 58-292-3370-429 Av. Intercimunal, Carrera H AL. Lado dek Rio Tammare Sector el Prado Tia Juana, edo Zulia, Venezuela Phone: 58-65-310-521 Fax: 58-65-310-832

Western Hemisphere Cameron PO Box 1212 Houston, Texas 77251-1212 Tel 713 939 2211 Fax 713 939 2620

Cameron WIllis Tel: 713 354 1200 Fax: 713 354 1291 Cameron Controls Tel: 713 683 4600 Fax: 713 683 4729 Cameron Drilling Tel: 713 939 2211 Fax: 713 939 2620 CAMSERV Tel: 713 939 2211 Fax: 713 939 2620

Eastern Hemisphere Cooper Cameron (U.K.) Ltd. 5 Mondial Way Harlington Hayes, UB3 5AR England Tel 44 208 990 1800 Fax 44 208 990 1888

Asia Pacific/Middle East Cooper Cameron (Singapore) Pte, Ltd. Subsidiary of Cooper Cameron Corporation 2 Gul Circle, Jurong Industrial Est Singapore 629560 Republic of Singapore Tel 65 861 3355 Fax 65 861 6197

Visit our website at: www.camerondiv.com

© Cooper Cameron Corporation, Cameron Division, Printed in USA, 7/01, NP/3M, WR10383 / TC1253

API 6a Camerron Training

Recommend Documents