cat data link sistema de comunicacionDescripción completa
Full description
Full description
Full description
diagnosis
ds
FIELD DATA
This document includes all numericals related to data link layer.
INTERESANTEFull description
Data Link Basics - The Link Budget
Full description
Deskripsi lengkap
ΧΑΡΟΚΟΠΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ Τμήμα Γεωγραφίας Πρόγραμμα Μεταπτυχιακών Σπουδών «Εφαρμοσμένη Γεωγραφία και Διαχείριση του Χώρου» Κατεύθυνση: Ανάπτυξη και Διαχείριση του Ευρωπαϊκού χώρου ΝΕΕΣ ΚΟΙΝΩΝΙΚ...
LinkFull description
Descrição: link proxy
Full description
conector can BUS cumminsFull description
History of the cat Anecdotes about cats cat's symbolism For all cat lovers out there!
CAT CPNS
EngineDescripción completa
Full description
Engine
966H Wheel Loader A6D00001-UP (MACHINE) POWERED BY C11 Engine(SEBP3... Página 1 de 2
Systems Operation 966H Wheel Loader and 972H Wheel Loader Power Train Media Number -RENR8845-00
Publication Date -01/09/2005
Date Updated -12/09/2005
i02363441
Cat Data Link SMCS - 7610-DTN
The CAT Data Link is a communication link that is used for the movement of data between electronic e lectronic controls. The CAT Data Link allows communication c ommunication between the power train electronic con trol module (ECM) and the Caterpillar Monitoring System. The CAT Data Link is bidirectional. The CAT Data Link allows the power train ECM to input information. The CAT Data Link allows the power train ECM to output information. The CAT Data Link is not a visible component. The CAT Data Link consists of the following parts: internal circuits of the power train ECM, the related harn ess wiring and the service tool connector. The CAT Data Link and the power train ECM are connected at pin-out J1-10 and pin-out J120. The power train ECM and the Caterpillar Monitoring System use data that is sent back a nd forth on the CAT Data Link. The following information is some of the information that is shared: l
l
l
l
The power train ECM receives service commands from the Caterpillar Monitoring System in order to change the operating modes mod es of the power train electronic control system. Th e service commands can direct the power train ECM to read service codes that are stored in the memory of the power train ECM. The service commands command s can direct the power train ECM to c lear service codes that are stored in the ECM memory. The power train ECM receives the harness co de input from the Caterpillar Monitoring System. The power train ECM determines the sales model of the machine from the harness code cod e input. The power train ECM sends signals to the C aterpillar Monitoring System. The Caterpillar Monitoring System uses the signals to report on the status of the power train electronic control system. The Caterpillar Monitoring System alerts the operator of the status by illuminating the corresponding alert indicator. The power train ECM sends the information that follows to the Caterpillar Monitoring System: parking brake status, status of the transmission transmission direction and status of the transmission speed. The Caterpillar Monitoring System displays the transmission direction that is selected and the transmission speed that is selected. The Caterpillar Monitoring System uses this information in
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp https://sis.cat.com/sisweb/sisweb/techdoc/t echdoc_print_page.jsp?returnurl=/sisweb/sisw ?returnurl=/sisweb/sisw... ... 11/03/2009 PDF created created with pdfFactory Pro trial version www.pdffactory.com
966H Wheel Loader A6D00001-UP (MACHINE) POWERED BY C11 Engine(SEBP3... Página 2 de 2 order to show the operator if the parking brake is engaged or disengaged. All electronic control modules that use the CAT Data Link have a module identifier (MID). The module identifiers that follow are valid for the machines that are the subject of this service manual module: Note:
Module Identifiers (MID) Power Train Electronic Control System ... 081 Caterpillar Monitoring System ... 030 Implement Electronic Control System ... 082 For more information on the Caterpillar Monitoring System, refer to the S ervice Manual module Systems Operation, "Monitoring System (Power Train Func tions)" for the machine that is being serviced. Reference:
For more information on the power train electronic control module (ECM), refer to the Service Manual module Systems Operation, "Electronic C ontrol Module (Power Train)" for the machine that is being serviced. Reference:
Copyright 1993 - 2009 Caterpillar Inc. All Rights Reserved. Private Network For SIS Licensees.
Wed Mar 11 11:19:41 EST 2009
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw... 11/03/2009 PDF created with pdfFactory Pro trial version www.pdffactory.com