78 AutoCAD Interview Questions and Answers

Global Guideline - Interviewer and Interviewee Guide e.g. MS Excel Interview Questions

Search

  Interview Guides  Applications Programs  AutoCAD

AutoCAD Interview Preparation Guide Download PDF  (Download.php? Add New Question () sc=AutoCAD_Interview_Questions_and_Answers_ sc=AutoCAD_Interview_Questions_a nd_Answers_)) AutoCAD AutoCAD Tutorial Tutorial and Interview Interview Questions Questions and A nswers Guide provide provide you the best way to learn AutoCad AutoCad and get preparatio preparation n of any job offered in AutoCa in AutoCad d field. field. A utoCAD is the industry leader in 3D CAD designing, drafting, modeling, modeling, architectural architectural drawing, and engineering engineering software and our Auto Cad Interview Questions and Answers will guide you that Auto Cad Cad is best-in-class customizable and expendable CAD application. Build your knowledge kno wledge by our AutoCad AutoCad Tutorial plus Interview Questions and Answers

Start Download Interview Categories:

78 AutoCAD Questions and Answers: 1 :: To reverse the UNDO command the correct entry is? (Answer.php? a=To_reverse_the_UNDO_command_the_co a=To_reverse_the_UNDO_command_the_ correct_entry_is) rrect_entry_is) (a) REDO (b) REDRAW (c) Esc (d) U

Is This This Answer Corr Correc ect? t? 3371 3371 Yes Yes

27 No

 Post Your Answer

2 :: Which of the following statements is true for AutoCad? (Answer.php? a=Which_of_the_following_statements_is_true_for_AutoCad) (a) ZOOM ALL will reach beyond the drawing limits if an object is there. (b) ZOOM ALL only reaches out to the drawing limits. (c) There is not real difference between ZOOM ALL and ZOOM E. (d) ZOOM ALL makes all objects visible irrespective of the layer visibility state.

Is This This Answe Answerr Corre Correct? ct? 1044 Yes

16 No


3 :: The command to scale a paper space viewport to half the drawn size is? (Answer.php? a=The_command_to_scale_a_paper_space_ a=The_command_to_sc ale_a_paper_space_viewport_to_half_the_drawn_ viewport_to_half_the_drawn_size_is) size_is) (a) Zoom 0.5x

. _ _ (Details.php?c=Applications_Programs (Questions.php?sc=AutoCAD_Inter (Questions.php? sc=AutoCAD_Inter BEA Weblogic ( (Questions.php?sc=BEA_Weblogic (Questions.php? sc=BEA_Weblogic Bioin for matic s (Q) (Questions.php?sc=Bioinformatics (Questions.php?sc=BizTalk_Server (Q (Ques titi on ons .p .php?s c= c= Bu Bug_T ra rac ki ki ng ng_ Bugzil Bugz illa l a (Qu (Ques esti tion ons .php?s ?s (Questions.php?sc=Bugzilla ) s.php Clar ify CRM (Que)sti (Questions.php?sc=Clarify_CRM (Ques titi on ons .p .php?s c= c= Co Codi ng ng_S ta tandar (Ques titions .p .php?s c= c= Co Conc ur urrent_Ver (Questions.php?sc=GIMP_Intervie (Ques titions .p .php?s c= c=J av av a_ a_Managem (Ques titions .p .php?s c= c= La Language_I nt nt eg eg Load Runner (Qu)es (Questions.php?sc=LoadRunner_ (Questions.php?sc=Magento_Interv (Questions.php? sc=Magento_Interv (Questions.php?sc=MATLAB_Inter (Qu Ques esti tion ons.p s.php hp? ?sc= sc=Mi Micr cros osof oft_ t_Ac Acce ce Mid d lewar e (Que)stion (Questions.php?sc=Middleware (Questions.php? sc=Middleware (Questions.php?sc=Mobile_Applicat (Questions.php? sc=Mobile_Applicat MQS er er ies ( Qu Qu es esti)on s. s.p (Questions.php?sc=MQSeries (Questions.php?sc=Microsoft_Exce (Questions.php?sc=Microsoft_Offic MS t_Outlo Outlook (Question (Qu estions.php? s.php?sc=Microsof sc=Microsoft_Ou tlo (Questions.php?sc=Microsoft_Word (Ques titi on ons .p .php?s c= c= Mo Model _V _V ie iew_C Net Dynamics (Q (Questions.php?sc=Net_Dynamics (Ques titions .p .php?s c= c=OLAP_Online_ (Questions.php?sc=OOAD_ObjectOrbix (Questio (Questions.php?s ns.php?sc=Or c=Or (Questions.php?sc=Orbix ) Qu ickb oo ook (Ques)tion s. (Questions.php?sc=Quickbook Rational Robotot( (Questions.php?sc=Rational_Rob (Questions.php? sc=Rational_Robot

(b) Zoom 1/2x (c) Zoom 2xp (d) zoom 0.5xp


11 No


(http://feeds.feedburner.com/Globa (http://feeds.feedbur ner.com/GlobalGuideL lGuideLine) ine)

Most Popular Quiz Categories: 4 :: Which one of the following options of the UNDO command allows the undo facility to be disabled? (Answer.php? Netwo Ne tworkin rking g (/… Testin Te sting g (/q (/qui… ui… a=Which_one_of_the_following_options_of_the_UNDO_comm a=Which_one_of_the_following_options _of_the_UNDO_command_allows_the_undo_facility_ and_allows_the_undo_facility_to_be_disabled) to_be_disabled) (a) AUTO (b) CONTROL (c) END

Manag Man ageme ement… nt…

JQuer JQu ery y (/q (/qui… ui…

Web We b Te Techn chnol… ol…

SAT (Sch (Schol ola… a…

Bank Ban k PO (Pr (Pr… …

C La Lang ngua uage ge …

Verba Ver ball Abi Ability lity… …

Softwa Sof tware re En…

(d) GROUP


10 No


5 :: Which one of the following commands forces AutoCAD to revise the entire drawing taking into account the effect of changes within the system? (Answer.php? a=commands_forces_AutoCAD_to_revise_the_entire_drawing) (a) CHANGE (b) REDO

(c) REDRAW

Interview Questions An…

(d) REGEN

Is This Answer Correct? 347 Yes

21,683 likes

6 No


6 :: Which one of the following commands allows simultaneous pan and zoom? (Answer.php? a=Which_one_of_the_following_commands_allows_simultaneous_pan_and_zoom)

Like Page

Share

Be the first of your friends to like this

(a) ZOOM DYNAMIC (b) ZOOM EXTENTS (c) ZOOM CENTER (d) ZOOM PAN


7 No


7 :: Which one of the following commands CANNOT be undone? (Answer.php? a=Which_one_of_the_following_commands_CANNOT_be_undone) (a) XREF (b) SETVAR (c) SAVE (d) LIST


4 No


8 :: The MAXIMUM number of commands whose effect can be undone by the UNDO command is? (Answer.php? a=The_MAXIMUM_number_of_commands_whose_effect_can_be_undone_by_the_UNDO_command_is)

Share This Page:

(a) 256 (b) 1000 (c) all the command issued since the drawing was first created (d) all commands issued since the drawing was last loaded into the drawing editor


1 No


    (http://www.facebook.com/share.php? (http://www.twitter.com/home? (http://www.linkedin.com/shar (http://www.pinterest.com/ u=http://globalguideline.com/interview_qu mini=true&url=http://globalgui questions status=+http://globalguideline.com  sc=AutoCAD_Interview_Questions_and_A (https://plus.google.com/109575479305 sc=AutoCAD_Interview_Questions sc=AutoCAD_Interview_Questi answers/followers/) (http://feeds.feedburn

9 :: Which one of the following commands would be used to limit the movement of the cursor to specified increments? (Answer.php? a=Which_one_of_the_following_commands_would_be_used_to_limit_the_movement_of_the_cursor_to_specified_increments) (a) AXIS (b) GRID (c) ORTHO (d) SNAP


2 No


10 :: Which one of the following commands can be used to turn the grid through 45 degrees ? (Answer.php? a=Which_one_of_the_following_commands_can_be_used_to_turn_the_grid_through_45_degrees) (a) AXIS (b) GRID (c) ROTATE (d) UCS


1 No


11 :: When producing a drawing of a site plan measuring 300m x 275m dimensions should be entered to a scale of? (Answer.php? a=When_producing_a_drawing_of_a_site_plan_measuring_300m_x_275m_dimensions_should_be_entered_to_a_scale_of) (a) 1:1 (b) 1:10 (c) 1:100 (d) 1:1000


3 No


12 :: Which one of the following BEST defines a "prototype" or "template" drawing? (Answer.php? a=Which_one_of_the_following_BEST_defines_a_prototype_or_template_drawing) (a) the drawing which is currently being edited by AutoCAD (b) a drawing used to store a library of standard symbols (c) a means of setting the initial drawing environment for new drawings (d) a file which holds details of the display, digitiser, and plotters that AutoCAD is currently configured for


0 No


13 :: In order for the grid command to work correctly two settings have to be established. (Answer.php? a=In_order_for_the_grid_command_to_work_correctly_two_settings_have_to_be_established) (a) The correct limits set and an appropriate setting of the grid value set (b) Limits set to ON and an appropriate setting of the grid value set (c) Snap and Osnap set (d) Gridmode and osmode both set to 1


0 No


14 :: When using AutoCAD for the design of a mechanical component measuring 1000 mm by 500 mm, the dimensions would normally be entered at a scale of? (Answer.php? a=When_using_AutoCAD_for_the_design_of_a_mechanical_component_measuring_1000_mm_by_500_mm_the_dimensions_would_normally_be_entered_at_a (a) 1:1 (b) 1:2 (c) 1:5 (d) 1:10


1 No


15 :: How many entity colours does AutoCAD support? (Answer.php? a=How_many_entity_colours_does_AutoCAD_support) (a) 255 (b) 16 (c) unlimited (d) 64


3 No


16 :: A house measures 15000 mm x 8000 mm in plan view. When drawing the plan view only which one of the following sets of limits would be BEST to use? (Answer.php? a=When_drawing_the_plan_view_only_which_one_of_the_following_sets_of_limits_would_be_BEST_to_use) (a) 0,0/20000,15000 (b) 0,0/20,15 metres (c) -2000,-2000/20000,15000 (d) -2000,-2000/15000,8000


0 No


17 :: What option would be selected following the TEXT command to select a different type of text to that currently in use? (Answer.php? a=What_option_would_be_selected_following_the_TEXT_command_to_select_a_different_type_of_text_to_that_currently_in_use) (b) FONT (c) SET (d) STYLE


1 No


18 :: The special character string that causes text to be underlined is (Answer.php? a=The_special_character_string_that_causes_text_to_be_underlined_is) (a) u%% (b) %%u (c) %u% (d) %u


1 No


19 :: Which of the following is an AutoCAD font for mathematical symbols? (Answer.php? a=Which_of_the_following_is_an_AutoCAD_font_for_mathematical_symbols) (a) MATHC (b) MATHFONT (c) MATHSYM (d) SYMATH


0 No


20 :: The effect of QTEXT being ON is to? (Answer.php?a=The_effect_of_QTEXT_being_ON_is_to) (a) place text directly in the drawing as defined (b) speed up drawing regeneration by replacing text with rectangles

(c) use simplified text font to replace complex text font (d) allow automatic line spacing of textual input


0 No


21 :: The text option that prompts the user for two endpoints and then automatically calculates the text height and positions the text between the two points is chosen from this AutoCAD prompt Align/Fit/Center/Middle/Right/TL/TC/TR/ML/MC/MR/BL/BC/BR Which one is correct? (Answer.php? a=prompts_the_user_for_two_endpoints_and_then_automatically_calculates_the_text_height) (a) Center (b) Align (c) TR (d) Fit


1 No


22 :: Which of the following commands will NOT place some form of text within the drawing (Answer.php? a=Which_of_the_following_commands_will_NOT_place_some_form_of_text_within_the_drawing) (a) MTEXT (b) DTEXT (c) STYLE (d) ATTDEF


0 No


23 :: When is a space NOT interpreted as the enter key? (Answer.php? a=When_is_a_space_NOT_interpreted_as_the_enter_key) (a) When entering text. (b) When using the PEDIT command. (c) When selecting objects. (d) The space is always an alternative to the enter key.


0 No


24 :: The special character string that is used to print the diameter sign is (Answer.php? a=The_special_character_string_that_is_used_to_print_the_diameter_sign_is) (a) %%c (b) %%d (c) %dia (d) c%%


0 No


25 :: Which one of the following is the AutoCAD filename extension used to indicate a compiled text font? (Answer.php? a=Which_one_of_the_following_is_the_AutoCAD_filename_extension_used_to_indicate_a_compiled_text_font) (a) HDX (b) SHP (c) SHX (d) TXT


1 No


26 :: Which one of the following could be an AutoCad drawing file? (Answer.php? a=Which_one_of_the_following_could_be_an_AutoCad_drawing_file) (a) DWG.PLAN (b) PLAN.DWG (c) DRAW.FLE (d) FILE.TXT


0 No


27 :: The line types definitions are stored on the system with an extension of? (Answer.php? a=The_line_types_definitions_are_stored_on_the_system_with_an_extension_of) (a) .LTT (b) .LSP (c) .LIN (d) .LAT


0 No


28 :: Which one of the following key combinations is a standard windoze short cut that does not relate to the clipboard. (Answer.php? a=Which_one_of_the_following_key_combinations_is_a_standard_windoze_short_cut_that_does_not_relate_to_the_clipboard) (a) Ctrl + S (b) Crtl + X (c) Ctrl + V (d) Ctrl + C


0 No


29 :: The shortcuts or command alias that allows us to key in L and AutoCAD responds with LINE are stored in a file named (Answer.php? a=The_shortcuts_or_command_alias_that_allows_us_to_key_in_L_and_AutoCAD_responds_with_LINE_are_stored_in_a_file_named) (a) SHORT-CUT.TXT (b) ACAD.COM (c) ACAD.PGP (d) ACAD.EXE


0 No


30 :: Which of the following key combinations issues the ISOPLANE command? (Answer.php? a=Which_of_the_following_key_combinations_issues_the_ISOPLANE_command) (a) CONTROL and T or F4 (b) CONTROL and E or F5 (c) CONTROL and D or F6 (d) CONTROL and I or F7


0 No


31 :: Which of the following statements is true? (Answer.php? a=Which_of_the_following_statements_is_true_in_autocad) (a) Backup copies of drawing files are saved in the "Support" folder. (b) Backup copies of drawing files are saved in a folder set by the user. (c) When a drawing is initially saved a backup copy is made with a .BAK extension. This can be renamed as a .DWG at a later date. (d) When a drawing is saved for the second time a backup copy is made with a .BAK extension. This can be renamed as a .DWG at a later date.


0 No


32 :: Which one of the following key combinations will toggle SNAP? (Answer.php? a=Which_one_of_the_following_key_combinations_will_toggle_SNAP) (a) Either F7 or CONTROL and G (b) Either F6 or CONTROL and D (c) Either F9 or CONTROL and B (d) Either F8 or CONTROL and O


1 No


33 :: Which one of the following key combinations will toggle COORDS? (Answer.php? a=Which_one_of_the_following_key_combinations_will_toggle_COORDS) (a) Either F7 or CONTROL and G (b) Either F6 or CONTROL and D (c) Either F9 or CONTROL and B (d) Either F8 or CONTROL and O


0 No


34 :: When designing an integrated circuit measuring 5mm x 5mm the measurements should be entered using a scale of (Answer.php? a=When_designing_an_integrated_circuit_measuring_5mm_x_5mm_the_measurements_should_be_entered_using_a_scale_of) (a) 1:1 (b) 1:2 (c) 1:10 (d) 1:5


0 No


35 :: Which one of the following best describes a "user co-ordinate System"? (Answer.php? a=Which_one_of_the_following_best_describes_a_user_co_ordinate_System) (a) The pair of co-ordinate points which define the lower left and upper

right corners of the drawing boundary (b) A series of co-ordinate points stored as variables for later use in the drawing (c) A co-ordinate system whose origin is located anywhere in three dimensional space (d) The master datum from which all measurements are taken.


0 No


36 :: Absolute co ordinates are measured from the (Answer.php? a=Absolute_co_ordinates_are_measured_from_the_in_autocad) (a) current UCS origin. (b) last point entered. (c) lower left hand corner as set by LIMITS command.


0 No


37 :: The position of a mouse on a surface is NOT directly related to the position of the screen cursor. This makes the mouse unsuitable for (Answer.php? a=The_position_of_a_mouse_on_a_surface_is_NOT_directly_related_to_the_position_of_the_screen_cursor_This_makes_the_mouse_unsuitable_for) (a) Selecting two points on the screen for a line draw operation. (b) Tracing an existing drawing. (c) Selecting menu items on the screen. (d) Sketching.


0 No


38 :: Which one of the following is an AutoCAD absolute point co-ordinate? (Answer.php? a=Which_one_of_the_following_is_an_AutoCAD_absolute_point_co_ordinate) (a) @361,270 (b) 60<90 (c) 361,270 (d) None of the above


0 No


39 :: When drawing a digital watch measuring 30mm x 25mm, which one of the following would be the BEST set of drawing limits to use? (Answer.php? a=When_drawing_a_digital_watch_measuring_30mm_x_25mm) (a) 0,0/40,35 (b) 0,0/30,25 (c) 0,0/100,100 (d) 0,0/297,210


0 No


40 :: To continue drawing a line from the last known point, enter (Answer.php? a=To_continue_drawing_a_line_from_the_last_known_point_enter) (a) 0,0 (b) @ (c) Next (d) a or b


0 No


41 :: Which one of the following is an AutoCAD relative polar co-ordinate (Answer.php? a=Which_one_of_the_following_is_an_AutoCAD_relative_polar_co_ordinate) (b) @81,30 (c) 30<81 (d) @81<30


0 No


42 :: ou are designing a floor plan and know the length and angle of one of the wall segments to be 1500mm and 30 degrees. This is to be followed by a wall 2000mm long at 90 degrees to the first. Which one of the following is the correct input? (Answer.php? a=You_are_designing_a_floor_plan_and_know_the_length_and_angle_of_one_of_the_wall_segments_to_be_1500mm_and_30_degrees_This_is_to_be_follow Which one of the following is the correct input? (a) @1500,30 @2000<120 (b) 1500<30 @2000<90

(c) @1500<30 @2000<90 (d) @1500<30 @2000<120


0 No


43 :: Which one of the following would draw a vertical line 30 units in length from a previously defined point given as 30,50? (Answer.php? a=Which_one_of_the_following_would_draw_a_vertical_line_30_units_in_length_from_a_previously_defined_point) (a) 60,50 (b) 30,80 (c) @30,0 (d) @30<0


0 No


44 :: The shape above is based on a 10 unit module. which is the correct set of codes to draw this shape, starting at the lower left and moving anti clock wise (Answer.php? a=The_shape_above_is_based_on_a_10_unit_module_which_is_the_correct_set_of_codes_to_draw_this_shape,_starting_at_the_lower_left_and_moving_anti (a) 0,0 10,0 @10<45 10,10 0,20 0,30 c (b) 0,0 10,0 @10,10 10,10 @0,20 0,30 c (c) 0,0 @10<0 20,10 10,10 10,30 30,0 c (d) 0,0 @10,0 @10,10 10,10 0,20 0,30 c


0 No


45 :: There are at least eleven options to the "select objects" prompt. Which of the following has an incorrect option? (Answer.php?a=Which_of_the_following_has_an_incorrect_option) (a) W WP R (b) C CP F (c) L ALL E (d) P SI A


0 No


46 :: When using the move command to move a single object by a given distance, which is the best of the following methods? (Answer.php? a=When_using_the_move_command_to_move_a_single_object_by_a_given_distance_which_is_the_best_of_the_following_methods) (a) Set osnap to END, pick the object, pick a base point then pick on the end of another object (b) Pick the object then key in the relative distance that it is to be moved (c) Pick the object then key in the absolute distance that it is to be moved (d) Pick the object, key in 'END' key in 'END' again then pick on the end of another object


1 No


47 :: The "select object" option "Previous" is best described by (Answer.php? a=The_select_object_option_Previous_is_best_described_by) (a) Picks the single object drawn by the previous command (b) Picks the previous drawn single object (c) Picks the previously picked group of objects (d) Picks the previous object in a Window or Crossing selection


1 No


48 :: The following two commands used one after the other BOUNDARY then pick inside an area ERASE ALL R LAST produces which of these results (Answer.php? a=The_following_two_commands_used_one_after_the_other_BOUNDARY_then_pick_inside_an_area_ERASE_ALL_R_LAST_produces_which_of_these_results) (a) Changes layer to the Boundary layer then erases all items on the last layer (b) Calculates the area of the boundary and erases all the construction lines (c) Draws a polyline that touches the extremes of the area then erases all the recently drawn lines (d) Draws a polyline that touches the extremes of the area then erases all but that polylin


0 No


49 :: Which one of the following system variables disables the prompt which asks for attribute values, and causes attributes to be set to their defaults? (Answer.php? a=Which_one_of_the_following_system_variables_disables_the_prompt_which_asks_for_attribute_values_and_causes_attributes_to_be_set_to_their_defaul (a) ATTDIA (b) ATTDISP (c) ATTPROMPT (d) ATTREQ


0 No


50 :: Which one of the following best defines attributes as used in AutoCAD and defined by the command DDATTDEF. (Answer.php? a=Which_one_of_the_following_best_defines_attributes_as_used_in_AutoCAD_and_defined_by_the_command_DDATTDEF) (a) Text entities that can link to a database. (b) Special text entities within a block. (c) Text entities that use an alternative font. (d) Special text entities.


0 No


51 :: What is the significance of using the command WBLOCK? (Answer.php? a=What_is_the_significance_of_using_the_command_WBLOCK) (a) WBLOCK only works on blocks. (b) the block is written to disk and can be used later in other drawings. (c) the block is written to the current drawing file only, saving disk space. (d) the block can have attributes written to it later.


0 No


52 :: The effect of the EXPLODE command when applied to a block is to? (Answer.php? a=The_effect_of_the_EXPLODE_command_when_applied_to_a_block_is_to) (a) reduce a block to it's constituent entities to allow editing. (b) return a block to it's created scale and rotation. (c) allow the editing of a block with different X,Y factors. (d) place constituent entities all onto the current layer.


0 No


53 :: The use of blocks allows libraries of standard parts to be developed and saved for latter use. Blocks may be stored (Answer.php? a=The_use_of_blocks_allows_libraries_of_standard_parts_to_be_developed_and_saved_for_latter_use_Blocks_may_be_stored) (a) on disk. (b) on disk, CDROM and the Internet. (c) on disk and CDROM. (d) on disk and the Internet.


0 No


54 :: Which one of the following methods should be used to repeat a complex part in a drawing in order to minimise file size? (Answer.php? a=Which_one_of_the_following_methods_should_be_used_to_repeat_a_complex_part_in_a_drawing_in_order_to_minimise_file_size) (a) use the COPY command (b) use the MIRROR command (c) use the ARRAY command (d) create a BLOCK then use INSERT


0 No


55 :: Which one of the following is a correct statement regarding AutoCAD blocks? (Answer.php? a=Which_one_of_the_following_is_a_correct_statement_regarding_AutoCAD_blocks) (a) Blocks can only be inserted into a drawing if they already exist in that drawing. (b) A block can have no more than ten attributes. (c) The insert command looks first within the drawing for blocks and then to the disk. (d) Every block has to have at least one attribute.


0 No


56 :: The SETVAR command is used to? Answer.php?a=The_SETVAR_command_is_used_to (a) configure the program settings to suit the various hardware devices (b) configure AutoCAD for use with a tablet menu (c) create an 'object set' for editing (d) change the values of the system variables


0 No


57 :: If the system variable MIRRTEXT is set to 1, text is (Answer.php? a=If_the_system_variable_MIRRTEXT_is_set_to_1_text_is) (a) mirrored (b) not mirrored (c) not reproduced in the mirror image (d) mirrored and reversed


0 No


58 :: Which one of the following allows the value of the system variable PICKBOX to be changed whilst in the ERASE command? (Answer.php? a=Which_one_of_the_following_allows_the_value_of_the_system_variable_PICKBOX_to_be_changed_whilst_in_the_ERASE_command) (a) SETVAR pickbox or PICKBOX (b) 'SETVAR pickbox or 'PICKBOX (c) 'SELECT (d) CHANGE


0 No


59 :: Which one of the following system variables determines the visibility of the control points of a pline spline curve? (Answer.php? a=Which_one_of_the_following_system_variables_determines_the_visibility_of_the_control_points_of_a_pline_spline_curve) (a) SPLFRAME (b) SPLMODE (c) SPLINESEGS (d) SPLINEVIEW


0 No


60 :: The system variable SPLINETYPE determines? (Answer.php? a=The_system_variable_SPLINETYPE_determines) (a) whether the 'curve' option of the PEDIT command produces a spline curve or a fit curve (b) whether editing functions are performed on the spline curve or on it's controlling frame (c) the accuracy of approximation of a spline curve (d) whether a spline curve is a quadratic b-spline or cubic b-spline


0 No


61 :: Which of the following system variables controls the accuracy of approximation of a spline curve? (Answer.php? a=Which_of_the_following_system_variables_controls_the_accuracy_of_approximation_of_a_spline_curve) (a) SPLFRAME (b) SPLINEFIT (c) SPLINESEGS (d) SPLMODE


0 No


62 :: Which one of the following commands can be used to change the value of a system variable? (Answer.php? a=Which_one_of_the_following_commands_can_be_used_to_change_the_value_of_a_system_variable) (a) CHANGE (b) DIMVAR (c) SELECT (d) SETVAR


0 No


63 :: One effect of setting the value of MIRRTEXT=0 is that? (Answer.php? a=One_effect_of_setting_the_value_of_MIRRTEXT_0_is_that) (a) text is displayed but not mirrored (b) text is displayed as a mirror

(c) text is not displayed (d) only text can be mirrored


0 No


64 :: Which one of the following is the BEST procedure for drawing a line from the point of intersection of a line and a circle? (Answer.php? a=Which_one_of_the_following_is_the_BEST_procedure_for_drawing_a_line_from_the_point_of_intersection_of_a_line_and_a_circle) (a) Select the LINE command and then use object snap with the INS option. (b) Select the LINE command and then use object snap with the INT option. (c) Set a small SNAP value then select the LINE command and SNAP.to the intersection (d) Zoom in on the intersection, then select the LINE command and click the LH mouse button for the start point.


0 No


65 :: When breaking a circle the break will occur in the (Answer.php? a=When_breaking_a_circle_the_break_will_occur_in_the) (a) anti clockwise direction (b) clockwise direction (c) horizontal direction (d) shortest direction |  Interview Questions IsHome (../index.php) 0 No This Answer Correct? 18 Yes Your Answer  Post (index.php)

66 :: Which one of the following statements is False? (Answer.php? a=Which_one_of_the_following_statements_is_False) (a) Plines can be filled but not outlined. (b) Plines can have either a consistent width or varying widths. (c) Plines can be made from lines and arcs. (d) Plines can be smoothed.


0 No


67 :: Which of the following shapes CANNOT be drawn by the polygon command? (Answer.php? a=Which_of_the_following_shapes_CANNOT_be_drawn_by_the_polygon_command) (a) Square (b) Hexagon (c) Rectangle (d) Equilateral triangle


0 No


68 :: The effect of freezing a layer is to? (Answer.php?a=The_effect_of_freezing_a_layer_is_to) (a) make it invisible and prevent regeneration (b) make it invisible but allow regeneration (c) allow visibility and regeneration (d) display the layer but prevent editing of it


0 No


69 :: Which one of the following is the maximum number of layers which can be defined in an AutoCAD drawing? (Answer.php? a=Which_one_of_the_following_is_the_maximum_number_of_layers_which_can_be_defined_in_an_AutoCAD_drawing) (a) 64 (b) 128 (c) 256 (d) UNLIMITED


0 No


70 :: Which one of the following commands can be used to obtain information a bout a selected object? (Answer.php? a=Which_one_of_the_following_commands_can_be_used_to_obtain_information_about_a_selected_object) (a) ID (b) LIST (c) MEASURE (d) STATUS


0 No


71 :: AutoCAD has had the dreaded Model Space and Paper Space since R12. What is the main advantage of the system? (Answer.php? a=AutoCAD_has_had_the_dreaded_Model_Space_and_Paper_Space_since_R12_What_is_the_main_advantage_of_the_system) (a) It confuses students (b) It converts 2D drawings to 3D (c) It enables the CAD operator to set the scale of the (d) It saves space because it requires fewer layers.


0 No


72 :: Why does AutoCAD allow you more than one layout? (Answer.php? a=Why_does_AutoCAD_allow_you_more_than_one_layout) (a) Different output devices. (b) Different sizes of output. (c) Different output orientation . (d) All of the above.


2 No


73 :: A common command for many Windoze applications is "Page Setup". What in AutoCAD does Page Setup achieve? (Answer.php? a=A_common_command_for_many_Windoze_applications_is_Page_Setup_What_in_AutoCAD_does_Page_Setup_achieve) (a) Sets the scale at which the drawing is printed. (b) Sets the output device, also the size and orientation of the output (c) Sets limits and the working units. (d) Sets Up the paper size, margins and orientation


0 No


74 :: Which of the following key combinations does not invoke an I/O command? (Answer.php? a=Which_of_the_following_key_combinations_does_not_invoke_an_I_O_command) (a) Ctrl + P (b) Ctrl + F (c) Ctrl + S (d) Ctrl + O


1 No


75 :: In a Windoze dialogue box, moving from one field to another is achieved by which of the following key combinations? (Answer.php? a=In_a_Windoze_dialogue_box_moving_from_one_field_to_another_is_achieved_by_which_of_the_following_key_combinations) (a) Ctrl + [Tab] (b) Alt + [Tab] (c) Shift + [Tab] (d) [Tab]


0 No


76 :: When constructing an AutoCAD Solid Model the UCS command is used to (Answer.php? a=When_constructing_an_AutoCAD_Solid_Model_the_UCS_command_is_used_to) (a) Draw more accurately (b) Draw Solid Objects (c) Rotate Solid Objects (d) Define a new Drawing Plane


0 No


77 :: When using the SOLVIEW command on a blank PS layout which sub command should be issued first and why? (Answer.php? a=When_using_the_SOLVIEW_command_on_a_blank_PS_layout_which_sub_command_should_be_issued_first_and_why) (a) UCS World because you have to start somewhere. (b) UCS World because the world UCS is the only one available. (c) Ortho because each view is to 90° to the other. (d) Aux because one can line up the view more accurately.


1 No


78 :: What is the use of autocad? (Answer.php?a=What_is_the_use_of_autocad) Autocad can be used by the professionals to visualize the imaginary v iew of the product on a computer system. In Autocad, it is possible by the drafter to make the changes in the product before

it gets finalized for design. It also gives the freedom for the designer to implement their various ideas and represent them to the suppliers or their clients.


0 No


 Add New Question ()

Most Popular Interview Guides

Web Tutorials

Keep in touch with us

 Accounting Finance Marketing Business

 JavaScript

(Details.php?

(../JavaScript_Guide/index.php) (../xml/index.php)

Tutorial

 SQL Tutorial

 HTML Tutorial

(../sql/index.php)

(../html/index.php)

c=Accounting_Finance_Marketing_Interview_Questions_a)

 Networking (Details.php?c=Basic_Networking)  Computer Programming (Details.php?

 XML Tutorial

 CSS Tutorial  XSLT Tutorial c=Basic_Programming_Interview_Questions_and_Answers) (../CSSGuide/index.php)(../xslt/index.php)  Operating System (Details.php? Copyright © 2007 - 2015 www.globalguideline.com All Rights Reserved. 482 Visitors Are Online Now  Database SEO Tutorial Articles c=Operating_System_Interview_Questions_and_Answers)



  

(http://www.facebook.com/share.php (http://www.twitter.com/home (http://www.linkedin.com/s (http://www.pinterest.c u=http://globalguideline.com/interview mini=true&url=http://global questions status=+http://globalguideline.  sc=AutoCAD_Interview_Questions_a (https://plus.google.com/1095754 sc=AutoCAD_Interview_Ques sc=AutoCAD_Interview_Q answers/followers/) (http://feeds.feedb Subscribe and Get Updates

 Computer Hardware About Us(Details.php? (../about-us.php) | ContactUs (../contactUs.php)(../articles/research.php? | Terms of use (../terms-of-use.php) |(../articles/research.php? PrivacyPolicy (../privacy_guideline.php) | Google+ (https://plus.google.com/109575479305880892023) c=Search_Engine_Optimization_Updates) c=Research_Articles_and_Updates_about_Database) c=Computer_Hardware_Interview_Questions_and_answers)

 Web Hosting Guide (../articles/research.php? c=Web_Hosting_GuideLine)

Subscribe

78 AutoCAD Interview Questions and Answers

Recommend Documents