CURRICULUM VITAE NAVANEETHA KANNAN .V CSWIP 3.1-Certified Welding Inspector PH: +966-593306271, +966-593306271, +91-9944133892 +91-9944133892 E MAIL:
[email protected] [email protected],,
[email protected]
OBJECTIVE: As a Diploma In Mechanical Engineer En gineer & Certified welding inspector by TWI UK (CSWIP 3.1) with I have Five and half years of progressive experience in the field of Mechanical and Piping Construction in Refinery, Oil and Gas, flow lines, flare lines and related facilities and Gas Plants as QC welding inspector. Worked in reputed Construction Companies with highly qualified Mana gements; I can utilize my current skills in Mechanical Services and make a significant contribution to your organization with strong work ethics and diligence.
EDUCATIONAL QUALIFICATION:
DIPLOMA IN MECHANICAL ENGINEERING: 2005-2007 Batch with first class from State Board of Technical Education & Training Tamilnadu India
TECHNICAL QUALIFICATION:
CSWIP 3.1
Petroleum Development of Oman (PDO) - Approved Welding Inspector.
Certified ASNT Level -II in Non-Destructive Testing as per standard SNT-TC-1A •
UT,RT,PT & MPT
Professional Experience Summery
Five and half years years of experience in Welding/NDE, Engineering & Piping (Oil & gas industries) field
from 2007 to till date at abroad & India.
Worked with ASME.B 31.3, Section II(A,B,C), II(A,B,C), SecV, SecVIII, SecVIII, and Sec IX
Knowledge of GTAW, SMAW, SAW welding process for CS, LTCS, Alloy, SS & DSS as per WPS.
EXPERIENCE EXPERIENCE IN MIDDLE EAST PRESENT EXPERIENCE ( JUNE 2013 TO TILL DATE) Organization Organizatio n
:
GS Construction Constructio n Arabia Co.Ltd, K.S.A
Project
: Rabigh-2
Client
:
Petro Rabigh
Designation
:
QC Inspector (Welding & Piping)
PREVIOUS EXPERIENCE ( JUNE 2011 TO JANUARY 2013) Organization Organizatio n
:
GS E&C, Oman
Project
:
SNDC Phase-1,Project Phase-1,Proj ect
Client
:
Petroleum Development Oman LLC.PDO
Designation
:
QC Inspector (Welding & Piping)
Organization
:
Lahoud Engineering Engineering under Technimont, under Technimont, U.A.E
Project
:
BOROUGE-2,Project BOROUGE-2,Pro ject
Client
:
Abudhabi Polymers Company Ltd.
Designation
:
QC Inspector (Welding & Piping)
Organization
:
Lahoud Engineering Engineering under Technip under Technip France , Qatar
Project
:
Ras Laffan Olefin Project
Client
:
Ras Laffan Olefin Company . RLOC
Designation
:
QC Inspector (Welding & Piping)
Organization
:
Orion Electric Controls Pvt.limit, Chennai
Designation
:
QC Inspector (Welding )
(APRIL 2009 TO AUGUST 2010)
(AUGUST 2008 TO APRIL 2009)
EXPERIENCE EXPERIENCE IN I N INDIA (SEPTEMBER 2010 TO APRIL 2011)
(AUGUST 2007 TO JULY 2008) Organization Organizatio n
:
Plus tech Engineering Pvt.Limit
Project
:
Jamnagar Export Refinery Project. JERP
Client
:
Reliance petroleum. Reliance
Designation
:
QC Inspector (Welding & Piping)
Wor k sco scope pe & r espons ponsii bil bi l i ti es:
Receiving inspection of material (Pipes, Fittings & Flanges), material such as ASTM A106 ,A312, A333,A335 &A790.Checking all the pipes, plates for damages, scratches, all pipes and fittings such as flanges preserved properly (flange face covered with wooden board, pipes ends en ds protected with cap ect.).Checking stainless steel material for corrosion/contamination & its storage (separate from carbon steel).Review of material test reports.
Welding consumable Inspection Performing receiving inspection of welding consumables checking condition, damages, type, size, lot number & quantity against purchase order. Review of consumable test certificate, its availability on welding material control room.
Involved in procedure qualification with SMAW, GTAW, SAW process for materials like ASTM A106 Gr.B, (Carbon Steel), ASTM A333 Gr.6 (Low Temperature Carbon Carbon Steel), ASTM A312 (Stainless Steel), ASTM A335 Gr.P5, P9, P11, P22 (Alloy Steel) and, ASTM 790 79 0 (Duplex Stainless Steel).
Review of subcontractor welding procedures qualified to AS ME B31.3/ASME Sec IX & SP 1173 1 173 (PDO specification for on plot pipe welding) with SMAW/GTAW process for Stainless steel and LTCS.
Witnessing WQT – WQT – Involved Involved in welder qualifications with SMAW/GTAW process for P1 CS materials, P4, P5A, P5B Alloy materials, P8 SS materials & P10H DSS materials.
Monitoring welder performance and discussions with client as well as subcontractors for improvements etc. in production quality.
Maintaining records of welder qualifications & Monitoring continuity.
Weld drawings & P&ID_ Ensure drawing issued has latest revision number & is stamped as controlled copy as per company ISO standards. Al l the drawings issued are clear and legible.
Pre welding fit-up inspection_ Surface preparation, root gap, bevel angle, misalignment, root face, material heat number, material size (SCH), preheat requirement per ASME B31.3 & method of preheating application.
Before Welding Maintain preheat temperature 75 mm on both sides of weld As per WPS .
During Welding Noting down Heat input for Root pass, checking argon purging for DSS and SS weld.
Visual Inspection and reporting of piping weld joints for materials like CS , LTCS, SS, Alloy Steel, etc. of different sizes as per ASME B31.3 standard.
Managing the Welding Summary Report
Witness to the post weld heat treatment (PWHT)
Witnessing Non-Destructive examination such as liquid penetrate testing, magnetic particle testing, and ultrasonic testing.
Interpretation of radiograph_ Review Radiograph films
Witnessing & reviving test results of Hardness test, Ferrite Count, and PMI of parent metal, HAZ, Weld metal.
Preparing inspection reports, NCR, NCR, technical queries, weekly QA/QC reports and monthly
Coordination with client, TPI for signing of All NDE Reports.
Inspect lines in accordance with P & ID & Latest approved isometric drawing. Checking all required supports are installed properly.
Issue Punch List and follow-up.
Witnessing of Hydrostatic Test & Pneumatic Test.
After completion of Hydrostatic test removing existing water from the pipe line and checking for cleanliness by doing rapture plate blasting.
Checking type of valve as per Iso drawing. Performing bolt tightening or tensioning according to type of bolt size, pipe material and rating.
Reinstatement_ Performing line walks with client. Verifying all gaskets, bolts, valves, supports, instruments are as per P&ID.
Records_ maintaining all records of Drawings, Inspection test plan, weld map, WPS/PQR/WPQT, repair procedures, NDT procedures, Consumable / Material test certificates or Mill test certs.
Attending weekly QA/QC meeting with client & subcontractor.
COMPUTER LITERACY: Good Knowledge to work with all Operating System, day today software’s & MS Office 07
PERSONAL PROFILE:
Date of Birth & Age
:
30/05/1988 & 26
Nationality
:
Indian
Marital Status
:
Single
Passport Number
:
G4495627
Date of Issue
:
24/08/2007
Date of Expiry
:
23/08/2017
Place of Issue
:
Tiruchirappalli
Languages Known
:
English, Hindi, Tamil, Malayalam and Telugu
Permanent Address
:
4/46, A.Balakrishna Puram Alagappa puram (P.O), Kovilpatti (T.K) Tutocorin (DIST), Tamil Nadu
DECLARATION:
I hereby declare that, all the particulars given above are true to my knowledge and belief.
Date: Place:
(NAVANEETHAKANNAN.V)
