Making the EC175 papercraft is simple! First print the model. Then cut, fold and glue it to have your very own EC175! Average time required: 2 to 4 hours.
Help Step number
8
Picture: Final assemblies are illustrated Mountain
Valley
3+5
Part numbers In black: Single parts In red: Left parts In green: Right parts
Apply glue on this area. Cut this section.
Stage 1 Cut the parts required in the step..
Use A4 Sheets of paper Size : 21*29.7mm) Weight : 160 to 180 grs/M2 Avoid too thin, fragile, and difcult to fold paper. Ruler To be used to cut straight lines
Stage 2 Fold the parts. Check mountain and valley foldings.
Stage 3 Glue the parts. The step is nished.
White glue Preferable because it does not damage the ink on the paper. Paper knife or at object to fold the paper neatly
Tweezers to handle small parts Brush To apply glue on the paper
Cutter or blade Blade is prefered to make precise cuts.
Felt tip pens to color the thickness of paper edges and the back of the wheels and rotor. Glue a weight such as a wire, paperclip or a coin on the front edge.
1
2
1+2
1
3
4
2+3
5
2+3
6
2+3
7
5
8
3+5
2+3+4
9
6
10
6
11
12
Glue a weight such as a wire, paperclip or a coin on the front edge
2+6
13
14
2+4+7
16
15
2+7
17
2+4+7
2+7
18
8 / 10
8 / 10
19
20
8+9 / 10+11
23
21
4+8 / 4+10
24
3+7+14
27
31
24
32
23+24
6+12 / 6+13
25
15
28
18-19-20-21-22
22
17+18-19-20-21-22
14
26
5+15
29
5+15+16
30
1+17+23
1+17+23
To be printed on 21*29.7mm (A4) - 160 to 180 grs/m2 paper
3
7
15
12 13
16
4
To be printed on 21*29.7mm (A4) - 160 to 180 grs/m2 paper
