Electrical Machines and Power Systems

Electrical Machines Technology and Electrical Power Systems

The world’s largest digital library

Try Scribd FREE for 30 days to access over 125 million titles without ads or interruptions! Start Free Trial Cancel Anytime.







Advancing human development through education and training TQ is a leading manufacturer manufacturer and provider provider of of technical equipment, education services and project management to schools, colleges, universities and industrial training facilities worldwide. With almost fifty years of unrivalled experience in education we are able to provide solutions to our customers which which specifically specifically address their training requirements requirements.. Established in 1958 in Nottingham, England, TQ is an ISO 9001 9001 accredited company and an TQ Products Academic Aerodynamics Fluid Mechanics Structures Materials Testing and Properties Theory of Machines Thermodynamics Electrical Engineering Principles Electrical Machines Technology Electrical Power Systems Control Engineering, Sensors and Instrumentation Modular Energy Laboratory Vocational Technology and Science Kits Electricity and Electronics

Investor in People.







Electrical Machines Technology and Power Systems Electrical engineering courses benefit immensely from practical experimentation. It lets students see theory in practice, enhancing the learning experience and reinforcing knowledge obtained from lectures. Sometimes, because of the scale, nature or cost of electrical training products, students have not always been given the opportunity to use genuinely comprehensive, representative equipment for handson experiments. The TQ Electrical Machines Tech Technology nology and Electrical Power Systems ranges give truly unique and comprehensive laboratory support for lecture room delivered theory. It includes unmatched, worldclass products specially designed to provide costeffective, realistic and highly productive teaching. For maximum teaching value, laboratory equipment needs to reproduce real-life characteristics. These products are completely realistic. All equipment is representative of full-scale industrial systems. The expert designs ensure students get the highest quality practical experience possible. When you invest in equipment like this, you’ll want to make the best use of it. Every product has extensive teaching materials for safety safety,, operation, experimental work and maintenance. The documentation, as well as the products themselves, has been developed working with expert educationalists and electrical power systems engineers with years of experience and thorough subject understanding. As a professional educator, you need the support of professional teaching equipment. The support this exceptional equipment equipment will give your teaching is unm unmatc atched hed..







Electrical Machines Teaching System

Electrica Elec tricall Mach Machines ines Teachi Teaching ng System TQ’s Electrical Machines Teaching System is a highly popular, established and comprehensive modular teaching system for a complete range of practical investigations into electrical machines, their operation, characteristics and applications.

For all academic levels, the modular nature of the teaching system enables electrical machines laboratories to be economically set up and extended as necessary to fulfil developing needs. The compact, lightweight design enables quick and easy installation, and experiment manuals cover each aspect of the range. Power electronic drives enable investigations into thyristor speed control of d.c. motors, stepper motors and drives, and variable frequency inverters, and the range includes computer interfaces for data logging and open/closed-loop control. Clear diagrams on the apparatus help students understand experiments, and high levels of in-built safety mean students can use the equipment with minimal supervision. Manufactured to extremely high quality standards, the hard-wearing, robust designs withstand many years of continual student use. The Electrical Machines Teaching System is made up of the following units:

Test Bed Provides power supplies and other essential services, as well as providing full support for machines under test. The Test Bed includes an integral eddy current dynamometer, with variable power supply with speed and torque displays. It also has facilities for monitoring and control by external instruments. The equipment is robust and hard-wearing. Combining this with high levels of safety means it is ideal for use by students on their own or in groups, or for class demonstration demonstrations. s. Minimal installation and commissioning commissioning are required, and the test bed is ergonomically ergonomical ly designed to fit on a workbench or desk. Test Bed

FH2

Instrumentation Frame A support frame which holds instrumentation and control modules from TQ’s Electrical Machines Teaching System.

The lightweight, portable frame is strong and sturdy to withstand many years of student use. It also includes an earth








Electrical Machines A wide selection of interchangeable, industrial-type electrical machines for educational use. The selection includes d.c., a.c., single-phase and three-phase motors and generators which give operating characteristics typical of their type. Ideal for supporting classroom-taught theory, each machine fits conveniently on to the Test Bed using a simple, fast alignment procedure. Each machine includes an overlay panel showing winding details. All the machines have similar frame sizes, which enables meaningful comparison between different machine type operating characteristics. Fully compatible with all other products in the Electrical Machines Teaching System, the machines include high levels of built-in safety including an integral earth interlock.

D.C. Compound Machine Shaded Pole Motor Split Phase Motor Capacitor Motor Cage Rotor Induction Motor Wound Rotor Machine A.C. Series Motor Two-Speed Induction Motor Synchronous Reluctance Motor Stepper Motor

FH50 FH60 FH70 FH80 FH90 FH100 FH110 FH130 FH140 FH150

Transformer Module A single-phase, double-wound transformer held in a robust enclosure. The multiple primary and secondary windings and tappings allow students to investigate a wide range r ange of transformer principles, including Scott Connection. Three units may be interconnected to enable three-phase thr ee-phase transformer experiments. Transformer Module

TR1

Variable Transfor Transformer mer For investigations into single-phase variable transformer operation. Housed in a rugged enclosure which fits on to an Instrumentation Frame. By connecting three of these modules

Instrumentation and Contro Con troll Mod Module uless A comprehensive selection of quality instrumentation, loading and control modules provides everything needed to complete a full and comprehensive range of test circuits for each electrical machine. Supplied in hardwearing, rugged enclosures, the modules conveniently mount on the Instrumentation Frame. All indicators, controls and sockets are ergonomically positioned, easy to read and adjust. Where appropriate, diagrammatic representations on the front panels of the modules aid student understanding of the circuits. The modules include appropriate safety and protection, such as overcurrent, voltage or thermal cut-outs.

D.C. Ammeter A.C. Ammeter Triple A.C. Ammeter D.C. Voltmeter Triple A.C. Voltmeter Wattmeter Speed and Slip Indicator Frequency Meter Power Factor Meter Synchroscope Synchronising Panel Resistive Load Bank Rheostat Three-Phase Resistive Load Bank Capacitive Load Bank Inductive Load Bank Direct On Line Starter Remote Control Unit Automatic Star Delta Starter Auto-Transformer uto-Transformer Starter Utility Switch Resistive Load Bank

A2 A3 A30 V2 V3 W1 S1 F1 PF1 SY1 SY2 R1 R2 R3L C1 L10 FH200 FH200/R FH201 FH202 FH203 R5L








Thyristor Drive System A frame-mounting module for use with TQ’s Electrical Machines Teaching System to enable investigations into thyristors controlling the speed of a d.c. motor. This is under various open and closed-circuit conditions and with different sources of feedback. These include studies of open and closedloop control using armature voltage, variable armature current and tachogenerator feedback. The equipment includes inputs for external controller signals, monitoring points for power rated voltage and current signal waveforms. It also includes a built-in meter for control signal monitoring. Thyristor Drive System

TDS2

Variable Frequency Inverter Illustrates the principles and operation of variable frequency and speed control of a cage rotor induction motor using a pulse width modulated (PWM) three-phase inverter. Fully compatible with equipment in the TQ Electrical Machines Teaching System range, the apparatus consists of a selfcontained pulse width modulated variable frequency inverter. It enables internal and external control of frequency and speed, acceleration and deceleration, and direction of rotation. The bench-mounting unit has fully buffered current and voltage monitoring points for safe monitoring and display by oscilloscope. A meter is included to display speed, slip and frequency. Variable Varia ble Frequency Inverter

MPM1015

Stepper Motor Drive System Fits on to an Instrumentation Frame for studying the stepping and dynamic characteristics of a stepper motor and drive configuration. Enables students to use standard industrial techniques to obtain speed and positional control. Includes inputs for variable analogue d.c. and digital signals for external control of speed, acceleration and position. For use with TQ’s Electrical Machines Teaching System. Stepper Motor Drive System

SMS2

Supply Converter Unit A transformer unit to provide the 230 volts line voltage required by the Test Bed. Can supply up to three test beds









Electrical Power Systems The teaching strategy of TQ’s Electrical Power Systems range is to introduce the student to power system engineering by giving a thorough understanding of the individual elements of a power system. A selection of equipment is available to cover each of the relevant elements, allowing students to investigate an extensive variety of behaviour. This includes problem solving and analysis, as each product can accept a wide range of faults. The products available cover every aspect of power systems: generation, transformation, transmission, distribution, utilisation and protection. The range is completed by total system study on the awardwinning Power System Simulator. Alternatively, all major products are available in Alternatively, modular form, and can be linked together using the Switched Busbar Module. This option allows education or training institutions to gradually build up

laboratories and combine individual power system components until they have a full laboratory simulation of a typical industrial power system. TQ’s Electrical Power Systems products make it simple for educational institutions to set up a complete power systems engineering course in a short time and in a cost-effective way. Our experts can help you determine the configuration that’s right for your course and your environment.

Thyristor and Diode Teac eachin hing g Uni Unitt Even for electrical engineers who do not specialise in power electronics, knowledge of the properties and circuitry of power semiconductor devices is of paramount importance. TQ’s Thyristor and Diode Teaching Unit is a versatile teaching aid which provides all the facilities needed to investigate the principles and applications of thyristors, diodes and converters. The scope of experimentation ranges from







Electrical Power Systems

Educational Transformer For comprehensive investigations into the principles and operating characteristics of single-phase and three-phase power and distribution transformers. This ergonomic er gonomic teaching console enables a wide range of experiments and investigations into transformer operation and applications. The apparatus contains one three-phase double-wound transformer and three single-phase triple-wound transformers with tertiary windings. The console has full instrumentation including a numerical protection relay with a wide range of functions. Parallel operation experiments are simplified and the transformers have a wide range of winding tappings and winding pairs. A variable auto transformer is also included. Educational Transformer

NE9240

Portable Resistive Loadbank

NE7026

Portable Capacitive Loadbank

NE7027

Portable Inductive Loadbank

NE7028

Three-Phase Mobile Educational Transformer A mobile 3 kVA, three-phase, multi-tapped transformer. As well as general laboratory use, the open and flexible design of the equipment makes it suitable for a wide variety of singlephase or three-phase experiments. The design makes it easy to demonstrate transformer principles in single-phase or threephase delta or star configuration. All tappings are connected to colour-coded shrouded sockets for safety. Students can measure core and winding temperature, and multiple tappings and extra (tertiary) windings enable a variety of output voltages.

Single-Phase Transformers A set of three single-phase, multi-tapped transformers for a wide range of single-phase or three-phase experiments. The apparatus consists of three separate transformers, each fitted inside a robust enclosure. Each transformer has a selection of high-voltage (primary) and low-voltage (secondary) windings to select a range of output voltages. The open, flexible design allows students to use the transformers for many different types of experiment. All tappings are accessible so that the transformers may be configured for delta or star connection. All tappings are connected to colour-coded, shrouded sockets for safety. To To make transformer principles easy to demonstrate, the transformers operate at one volt per turn. tur n. This means that the output (no load) voltage corresponds exactly to the number of turns. The transformers also enable students to measure the temperatures of the primary windings, the secondary windings and the core of the blue-phase transformer.








Salient Pole Generator Allows comprehensive investigations into the principles and operating characteristics of salient pole generators. The floor-standing educational console includes a fully instrumented salient pole generator with facilities to allow no-load tests and synchronising and parallelling with three-phase supplies. When used with external load banks (available separately), the equipment also allows full-load generator tests, load sharing, protective relaying, short circuit and zero-power factor tests. The base of the console houses the generator and primemover. The steady state and transient performance characteristics of the motor and generator combination are typical of industrial turbine and generator sets. This allows meaningful generator investigations, including studies into performance envelope stability limits. The equipment has comprehensive instrumentation and controls, plus a numerical protection relay for investigations into a wide range of protective functions and analysis. The console includes a detailed mimic diagram and clear labelling to help student understanding. It also has a convenient work surface. TQ’s Salient Pole Generator can easily be incorporated into a modular power system using a Switched Busbar Module (NE9200, available separately). Salient Pole Generator

NE9250


NE7026


NE7027


NE7028

Transmission Line Simulator For comprehensive investigations into short, medium and long transmission line performance, including the characteristicss of single-phase and three-phase systems. characteristic The Transmission Line Simulator enables realistic studies under variable load and power factor conditions, as well as with inserted faults. The equipment also enables effective demonstrations of the “Pi” or “Tee” methods of loss profiling. The floor-standing teaching console includes all








Switched Busbar Module TQ’s Electrical Power System range consists of products to allow students to investigate the principles associated with all elements of a typical electrical power system. These include generation, transformation, transmission, distribution, utilisation and protection. Once students fully understand the principles associated with each of these elements, they can advance to more complex electrical power syst ems. These include combinations of two or more of these elements. TQ’s Switched Busbar Module cost-effectively interconnects products from TQ’s Electrical Power Systems range, allowing investigations into more complex electrical power systems. The Switched Busbar Module is a versatile, safe and costeffective laboratory solution to support a complete course in electrical power system training, theory and practice. It interconnects products in TQ’s Electrical Power Systems range in a realistic and meaningful way, producing circuits with characteristics typical of industrial electrical power systems. The Switched Busbar Module can be hard-wired to two or more TQ Power System modules. These are the Salient Pole Generator, Educational Transformer, A.C. Transmission Line Simulator and Distribution Distr ibution Trainer. Students use the individua individuall products for practical experiments in the topics involved. Using the same equipment, linked by a Switched Busbar Module, minimises the difficult transition from fundamental principles to studies of more complex systems. Students observe the effects on overall system per formance and also the interaction between each element. An essential feature of the Switched Busbar Module design is its simplicity. Students easily and quickly construct and investigate circuits. Connections remain clearly visible so the schematic of the circuit is always apparent to the student.

Power Factor Load Bank and Static Compensator The ideal equipment for introducing and providing a basic understanding of three-phase systems. Balanced and

The Switched Busbar Module is a floor-standing enclosure. It is an industry-standard configuration of switches, isolators, incoming and outgoing feeders, busbars, current transformers, circuit breakers and instrumentation. A mimic diagram clearly details the location and functionality of all circuit components and test points. Switched Busbar Module

NE9200


NE7026


NE7027


NE7028

Educational Transformer

NE9240

Salient Pole Generator

NE9250

Transmission Line Simulator

NE9280

Distribution Trainer

NE9202








Distribution Trainer An educational d.c. and single-phase and three-phase a.c. line simulator, for a comprehensive range of practical investigations into the principles of electrical distribution.. From fundamental concepts to the distribution operation and protection of a typical industrial power distribution system, this versatile equipment is suitable for teaching a wide variety of technical levels. The distribution trainer is straightforward to use, while effective in teaching with a student-friendly design. It reflects current engineering practice and teaching trends, and includes an up-to-date numerical protection relay which provides a wide range of functions. Lecturers can use the equipment to promote awareness of fundamental electrical effects and laws, and for student experiments into radial and ring main distribution circuits. Balanced and unbalanced loads are configurable, and faults may be applied and their effects observed. The Distribution Trainer can easily be incorporated into a modular power system using a Switched Busbar Module (NE9200). Distribution Trainer

NE9202

Protection Relay Test Set A teaching console which gives students theoretical and practical experience with a variety of industrial relays. This includes experiments investigating investigatin g overcurrent, earth fault, differential,

circulating current and distance numerical protection. It circulating also covers relay setting and tripping characteristics, characteristics, as well as grading and discrimination discrimination under fault conditions. TQ’s Protection Relay Test Set uses genuine industrial protection equipment and techniques, not simulation. A range of modern industrial relays, specially adapted by TQ for educational use, is available separately. The equipment allows students to compare individual relay characteristics, as well as simultaneous comparison of any two relays to introduce the topic of discrimina discrimination. tion. The console incorporates instrumentation,, power supplies, instrumentation










Overcurrent and Earth Faul Fa ultt Re Rela layy

Relays for use with TQ’s Protection and Relay Test Test Set

An entry-level three-phase and earth fault overcurrent relay. Enables investigations into protection and monitoring of transformers, transmission lines and distribution schemes.

Overcurrent and Earth Fault Relay

PS251

Differential Protection Relay A differential protection relay which enables investigations into protection of transformers, autotransformers, generators and other electrical apparatus with two windings. The relay clearly demonstrates the characteristics of three-phase differential protection. This includes high stability during “out-of-zone” faults, zero-sequence current filtering for each winding, highspeed operation, magnetising inrush restraint, amplitude and vector matching.

The following products incorporate genuine modern industrial relays. For use with TQ’s Protection and Relay Test Set (PS250), each relay is presented in an educational format and housed in a robust enclosure with carrying handle. The modules mount on the desk area of the Protection and Relay Test Set, and connect to the test set using multi-core cables and safety leads. The lecturer or student sets up different fault circuits on the Protection and Relay Test Set. They then use the keypad and display on the relay module to program it to the settings needed for the tests. They can also use the software supplied with the Protection and Relay Test Set and computer (available separately) to program the relay module. The relay module is then connected to the fault circuits so tests can be performed. Most tests are performed using single relays. However, there are enough connections on the Protection and Relay Test Set to test two relay modules at the same time.







Power System Engineering

Power System Simulator The TQ Power System Simulator provides a safe and costeffective environment in which engineers, technicians and control room operatives can gain knowledge-based learning and skills-based training in all aspects of electrical power systems. It uses modern industrial instrumentation, control devices and techniques throughout, ensuring the steady-state and transient operating characteristics characteristics are typical of full-scale electrical power systems. It is possible to configure the Power System Simulator to represent any national electrical electrical grid network. The Power System Simulator provides all necessary facilities to support the practical content of a comprehensive course in electrical power systems. It includes a thorough manual with detailed experiment procedures, full theoretical support, and a structured series of practical investigations. The practical investigations describe studies into the operation, control and performance of power systems using per unit (pu) treatment. Other technical information fully covers safety and maintenance, and the protective relay manufacturer’s operation and set-up manuals. The Power System Simulator combines all the individual elements found in a typical electrical power system. These elements are:  Generation

• Transformation

• Transmission

• Distribution

• Utilisation

• Protection

The open structure of the Power System Simulator allows students to individually investigate each of the system elements. This ensures students and trainees, working on their own or in groups, fully understand the principles involved with each part of a power system. They can then progress, in easy steps, to more advanced systems where two or more elements are interconnected. They can then study how these combined elements perform and interact. The highest level of study is with all elements included. This allows students to investigate the performance of a complete power system. It also allows students to gain the skills and expertise required to operate, optimise and maintain the system. This progressive learning process allows students to more easily and quickly understand the principles involved with this complex topic. The Power System Simulator consists of a self-contained, freestanding enclosure with rear access to all power components via interlocked doors. It includes full state-of-the-art built-in protection, instrumentation and loading facilities. The front panel of the Power System Simulator provides access to all facilities including a full range of instrumentation, indicators, controls, meters and protective relays. A detailed mimic diagram assists students’ understanding of the function of each facility and, therefore, how they should correctly connect and use them. The Power System Simulator is one of TQ’s most highly regarded products, used in institutions throughout the world. Power System Simulator

NE9270

Please turn to the next page for the ancillari ancillaries es available with this product.







Power System Engineering

Power System Simulator SCADA Package TQ’s Supervisory Control and Data Acquisition Software (SCADA) Package is a fully compatible, optional ancillary which extends the scope of experimentation possible with TQ’s Power System Simulator (NE9270). The SCADA Package consists of: •

a co computer (P (PC)

•

industria indust riall SCADA SCADA softw software are with with grap graphic hicss screen screenss representing different aspects of monitoring and controlling the functions of the Power System Simulator

•

interfaces interfa ces to to allow allow direc directt connect connection ion to a Powe Powerr System System Simulator

•

a qua quali lity ty col colou ourr prin printe ter r

The Power System Simulator includes intelligent electronic devices, including numerically-based protective relays and digital instrumentation. The SCADA software running on the PC connects to these devices to provide Power System Simulator operators with continuously updated system and power network information. The facilities within the SCADA software package use industry-standard SCADA presentation formats and procedures throughout. These include supervision, plant protection, plant monitoring, switchgear control, event and alarm management. A wide range of functions is possible using the SCADA package to provide a comprehensive course in modern power systems. Power System Simulator SCADA Package

NE9271







Need more information? To find out more about TQ, visit our website at www.tq.com www.tq.com.. Here you can quickly and conveniently find detailed information about all of our products and buy many products online online.. Alternatively, for additional information about any of our products or services, or to talk to one of our experts, contact TQ direct.

www.tq.com Tel: +44 115 972 2611 Fax: +44 115 973 1520 Email: [email protected]







Electrical Machines and Power Systems

Recommend Documents