Space available on same height for New antenna (Y/N) Y Y Y
Case 1: Space available on same height: Provide descript
Case 2: Space not available on same height: Provide description that why the
Tower View and Leg information for new Antennas NOTE: Take separate and clear pictures for every cell on which expansion is required. Mention the leg summary for each leg on which new antenna is to be installed. Tower
Sector_1 Leg
Sector_2 Leg
Existing Antenna(s) View(Befor Note: Mention Existing Antennas inf new antenna is which new antenna
Sector_3 Leg
ting Antenna(s) View(Before Add antenna and change the mount) Existing Antenna(s) View(After add mo Mention Existing Antennas information like Elcetrical tilt/ Mechanical tilt for the cells in which Note: Mention Existing Antennas information li ntenna is which new antenna is to be added. E-tilt & M-tilt snaps should be attached for all in which new antenna is which new antenna the antennae separately be attached for all the a Sector_1 MT: Sector_1 MT:
Sector_1 ET:
Sector_1 ET:
Sector_2 MT:
Sector_2 MT:
Sector_2 ET:
Sector_2 ET:
Sector_3 MT:
Sector_3 MT:
Sector_3 ET:
Sector_3 ET:
tenna(s) View(After add mount and antenna) isting Antennas information like Elcetrical tilt/ Mechanical tilt for the cells ntenna is which new antenna is to be added. E-tilt & M-tilt snaps should be attached for all the antennae separately Sector_1 MT:
New Antenna(s) View(After add mount and antenna)
Sector_1 MT:
Sector_1 ET:
Sector_1 ET:
Sector_2 MT:
Sector_2 MT:
Sector_2 ET:
Sector_2 ET:
Sector_3 MT:
Sector_3 MT:
Sector_3 ET:
Sector_3 ET:
add mount and antenna)
0 degree
120 degree
Full view from tower
240 degree
Sector 1 view Mention how many degree here
60
Sector 1 view Mention how many degree here
40
Existing Antenna before Add antenna and change the mount
Existing Antenna after Add antenna and change the mount
mount
Sector 1 view Mention how many degree here
New Antenna After Add antenna and change the mount