Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Future Horizons Advanced Technology Presents: (#WISH) Wishing Machine Plans
•
Psionic, Radionic machine can electronically manipulate Pscyhic energy
•
Believed to work on a newly discovered principle of Quantum Mechanics
•
Can be used to amplify thought and affect physical organisms
•
Includes New scientific explanation and experiments
•
Learn how to build one for yourself
The Wishing Machine is based on an amazing technology discovered back in the 1950’s called Radionics. It is basically a type of electronic voodoo machine that can be used to effect living things such as plants animals and simple organisms. Although it is most effective against simple organisms, it is also able to affect animals and humans as well although it requires a much longer exposure time of at least several weeks depending on what type of influence is being attempted. It was even reportedly used for healing and mind control within the last 50 years. www.futurehorizons.net Copyright 2002 Future Horizons Inc. 1
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Wishing Machine The wishing Machine is based on an amazing technology discovered back in the 1950’s called Radionics. It is in effect a Radionic type machine for those of you who may be familiar with the term. It is basically a type of electronic voodoo machine that can be used to effect living things such as plants animals and simple organisms. It was discovered by some researchers that it was highly effective against simple organisms such as all types of bacteria, fungus, germs, insects etc. It was used to essentially wipe out these organisms in many experiments. The researchers did extensive tests to attempt to determine just what was happening and how the machine worked. They realized that although it was most effective against simple organisms, it was also able to affect animals and humans as well although it required a much longer exposure time of at least several weeks depending on what type of influence they were attempting. It was even used for healing and mind control within the last 50 years.
How it works The concept is very simple. You first need to determine what it is you’re trying to achieve such as healing someone, effecting someone’s will such as mind control, or actually effecting your own reality. Then you need a sample of your desired target. If your trying to effect a person then any photograph of them is sufficient, a strand of their hair, a drop of their blood or anything that can be used to represent that person. Now you see why it’s referred to as electronic voodoo. Once you have a sample of your target all you need to do is write on a small piece of paper or on the sample itself the outcome that you desire! If you’re trying to affect something about your own reality then it’s a little different. Let’s say for example you want to win the lottery. You can simply take a $100 bill or any other large bill and write on it in as few words as possible exactly what you want such as “Win Lottery”. If your attempting to heal yourself or someone else you simply acquire a sample of the target and then just write on a piece of paper your desired outcome. The antenna is then installed by screwing it into the top of the machine. The sample you are using is then inserted under the hinged copper plate on top of the machine. Then simply plug the power plug into the wall socket. Now close your eyes and relax and focus on your wish and hold that image in your mind with absolute belief that it will come true. The longer you can do this the faster your results will occur. Its best to do this at least once or twice a day until you see results. Leave the machine on as long as possible until your goal is reached. Just remember that simpler wishes can occur fairly soon while others take much longer to achieve. One important step in the process is to think of your goal as much as possible throughout your day. A good way to do this is to set the Wishing Machine up in a place where you will see it very often during the day such as in your workplace or your living room. Somewhere that you will see it often and be reminded to think about your desired wish. An important tip to remember is to keep your desires simple and short and very specific. Always try to be specific but keep in mind that the results might not be as specific as you imagined. This is due to the operators mind not being used to this type of work. 2
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Scientific Validation If all this sounds too good to be true then I can tell you that there is some real science to back it up. These Wishing Machine Plans (which are included with the purchase of the machine) include some experiments that you can do to prove to yourself that the machine really works. One interesting experiment is to use the machine to effect the growth of a simple organism such as mold spores. You start off by cultivating 2 samples of mold in a small dish and then label one as “dish A” and the other as “dish B”. You then put them away somewhere safe where they will not be disturbed. Insert a photo of “dish A” into the Wishing Machine and make a wish about it thriving and growing. Run the experiment for at least a week and then check on the mold spores. You will be surprised to find that it has worked and “dish A” has grown much more than “dish B”. You can also use plants or seedlings and the experiment will work the same. This amazing machine is actually just a type of Psionic amplifier that works using a direct link to your own mind. It essentially amplifies your intent or wish and can help to materialize it into your reality. The machine is simply a tool and the real power actually comes from the person using it so the more focussed your mind and willpower is the better your results will be. This technology has been around for many years and was successfully tested many times even in laboratory conditions. Many people thought it was complete nonsense but now conventional science is finally catching up. Some researchers now believe that it’s a Quantum Mechanics effect that allows the machine to work. A thought experiment invented by Albert Einstein, Boris Podolsky, and Nathan Rosen back in the late 1930's has now begun to scientifically substantiate much of the psychic and Psionic phenomenon. It is a sort of bizarre loophole in quantum physics known as the EPR (EinsteinPodolsky-Rosen) effect that seems to tell us that our world is put together in such a way that an event going on in a distant galaxy or in the mind of a friend across town is also going on in some analogous way in our own mind simultaneously. The experiment is a bit complex and rather difficult to explain but here it is: The experiment involves what physicists call a two particle system of zero spin. This means that you have two particles, such as two electrons, one spinning one way and the other spinning in exactly the opposite way so that the spin of each of the electrons cancels the other out. One spins right while the other spins left or one spins up while the other spins down. In the experiment the two particles are separated electrically so that their spins should not have an effect on one another. Now comes the strange part. Physicists were able to affect the spin of one of the electrons randomly using a magnetic field and found that the other electron seemed to know instantly that this occurred and it reverses its own spin to maintain equilibrium of spin cancellation. This experiment tends to confirm that there is a universal connectedness with all things within our world. And that information about any part of the whole is instantly available to any single part! This strange connectedness proven by the EPR effect has a mathematical proof known as Bell's theorem, which was published in 1964 by J.S. Bell, a physicist at the European organization for 3
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
nuclear research (CERN) in Switzerland. Bells theorem implies that at a fundamental level the "separate parts" of the universe are connected in an intimate and immediate way. Another amazing part of this is the fact that this type of informational transfer if you will takes place instantaneously everywhere in the universe. This has some incredible and far reaching implications in the way our reality actually works. The experiment gives confirmation to the belief that all matter in the known universe exhibits a universal connectedness and that information is available and accessible to anything or anyone who knows the secret of accessing it. This is like a universal collective unconscious. This also means that the subconscious minds of all people are also collectively linked on some level together and to the rest of the universe. The same apparently goes for all physical matter. Some other scientific discoveries have proven that psychic force energy can actually be amplified and manipulated by the use of specialized electronic machines. Back in the 1940's an incredible new field of science was created based on the amazing discoveries of a few pioneering scientists. The field I speak of is known as Psychotronics, also known as Psionics or Radionics. Psychotronics is a technology that utilizes special electronic equipment to amplify and manipulate psychic energy in various ways! Psychic + Electronics = Psychotronics or Psionics for short. Some incredible discoveries have been made in this field in the last 50 years. Some of which may shock and surprise you. Sadly this technology has been strongly suppressed, especially within the United States. And so even though there is over 50 years of research into this field, many people have never even heard of it before. Some of these Psionic machines can be used to mentally affect your own reality around you. These devices can literally make you into a modern day Merlin the magician. One of the early pioneers of this technology was a man named Dr. Thomas Galen Hieronymous. Hieronymous was the first person to be granted a U.S. patent on a Psionic type device back in 1949. His invention called the Hieronymous machine is a device that he claimed was used to detect and analyze various minerals and materials electronically. But it was actually much much more. To keep it believable and to not sabotage his efforts to obtain the patent, he didn’t reveal all of its details in the patent. In one of Hieronymous's experiments he describes a bizarre method of feeding plants; he used two groups of seeds. He planted each group into a separate box in a dark room without any natural sunlight. One of the groups was used as a control group and was left alone completely without sunlight. Each group was watered regularly. The other group was treated exactly the same except for one major difference. Several wires were attached to this group and fed through the wall to the outside and connected to metal foil plates exposed to sunlight. Amazingly, the plants that were wired to the plates grew as if they were receiving sunlight while the other group hardly grew at all. This basic experiment confirmed that the psychic force energy can be manipulated electrically. Even after 50 years of study, many researchers believe we are only scratching the surface of this technology
4
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
The Wishing Machine This device stands in a class of devices that are very special in that they appear to break many laws in the scientific community and they cannot be explained away by conventional means. The wishing machine is actually an electronic brainwave amplifier. It has the ability to produce results directly from the input thought patterns of its operator. The input thoughts being in direct relation to the significance of the achieved results. Another words the more serious and intense the input thought patterns become, the greater the desired results will be! This is a very strange device but many individuals have had extraordinary results with it. This device under the proper conditions and a powerful operator could become a very dangerous toy, capable of bringing about to physical reality, the thoughts or wishes of the operator. Use it wisely and remember it is not a toy! The device is simply a standard op-amp audio frequency amplifier with 2 flat metal plates on the input. One at ground potential and the other connected to the high-impedance input of the amp. The output consists of a simple vertical rod dipole antenna. The amplifier is powered by a 12volt power supply which plugs into the wall. Fig 1 represents a block diagram of the wishing machine. The device is highly effective in accelerating growth or decay of reasonably simple life forms such as viruses, bacteria, fungi, plants, insects, and lower animals. When a symbolic sample such as a photograph of a plant, field, tree, or person, is placed between the 2 plates and the amplifier is turned on, the experimenter then conscientiously thinks of some change he desires to occur, or some wish concerning the object symbolized in the sample placed between the plates. As time passes the desired wishes of the operator begin to manifest in the target! A similar device has apparently achieved a 90% plus kill ratio for Japanese Beetles in 90 different tests conducted in the 1950's by the Pennsylvania State Department of Agriculture. It also achieved a 70% kill ratio against corn borers in another test conducted by the same agency. It also amazingly destroyed tent caterpillars in a tree 1200 miles from the site of the device; it has also been seen to have eliminated acne from the skin of an adolescent girl and eliminated a large number of severe warts on another infant girl. There is the incredible case of a man with a young child. The child was less than 3 years old and suffering badly from warts, which of course can be caused by a number of different viruses. She must have been especially susceptible because she had warts everywhere, and their location and extent of growth had become serious. Medical treatments were extensive but seemed to have very little effect. The man decided he had nothing to loose and so placed a photograph of his daughter between the input plates of the wishing machine, turned on the power, and conscientiously thought about the warts going away, about killing the virus that was causing the warts, and about his daughter without them. The wishing machine was kept operating constantly and from time to time during the following days he kept thinking about her and those warts. The result was frightening. Within 3 days, the young girls’ warts had decreased remarkably, including those that were beginning to grow inside her nostrils. Within 4 weeks, she was completely free of any warts and has not to this day had anymore. 5
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
The man disassembled the wishing machine because he was afraid of what he might do with it. The amount of personal power that such a device bestows upon an individual is incredible and the responsibility of such power is equally incredible and not meant for the irresponsible or emotionally unstable. The device appears as sheer outright magic whose consequences go far beyond those of other strange and unusual machines such as the dowsing rod or the Hieronymous machine, which by comparison seem like toys. There appears to be a built in safety feature in the wishing machine which makes it useful (in destructive mode) only against fairly simple organisms, which operate mostly on instincts. The machine does not seem to work destructively against human beings probably due to the higher thought processes and a type of psychic defense shield, which seems to exist in most people. However this varies from person to person and some people are much more sensitive than others to psychic attacks.
Operation To be effective, the device must use some input sample that is directly connected symbolically to the object the experimenter wishes to be changed. For example, a photograph of the insect infested field can be used. Something from the target organism can be used such as a leaf from a plant or a piece of paper containing a drop of blood from an individual. The only factor affecting the operation of the machine appears to be the direct psychic connection between the symbol inserted in the plates and the subject you are trying to effect. Interestingly this is the same methodology used in voodoo, witchcraft, shamans and spell casters of modern and ancient times. These individuals understood the effect that these symbolic rituals and spells could have on their intended targets. The wishing machine is the modern equivalent.
Place the photograph or sample between the 2 input plates. Turn on the amplifier and make your wish! Leave the amplifier turned on. From time to time, think about your wish or desired action. As is typical of Psionic machines, distance seems to have no effect upon its operation. Nor does the distance between the machine and the operator. 6
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Experiments A number of verifying experiments suggest themselves. These can be carried out simply and easily by any amateur high school level scientists. The easiest would be to use numbered paper plates containing bread mold from a common source, the experimenter should concentrate on reducing the growth rate of one of the specimens. A photograph of that plate should be placed under the copper plate. The machine may be located anywhere during the experiment but the paper plates should all be kept together in the same environmental conditions. The growth of the bread mold in the 2 plates can be visually determined and a record should be kept. Another experiment with bread mold can be conducted where the operator is not the experimenter and does not know which plate’s photo is being used in the experiment. The operator can then just wish that the object whose photograph is at the input be changed. Experimental organisms could also include bacteria, insects and plants. If positive results are obtained, the experiment should be repeated with the machine located at a remote location to test the apparent fact that distance has no bearing on the experiments results.
Construction As discussed earlier, this device is a straightforward op-amp audio amplifier, which is shown below. The values of the components are also called out. Most of the parts can be purchased at Radio Shack. Or you could just buy any type of basic audio amp instead of building your own. The amplifier can be built on an ordinary circuit board and enclosed, along with a battery or a wall plug and the antenna mount in an electronic project box. The 2 copper input plates can be obtained at most craft and hobby stores. Although copper was used in the original device, any electrically conductive plate should be just as effective. The antenna is a simple dipole rod antenna. The General Purpose Amp uses a 1 transistor pre-amp and an IC audio amplifier chip (LM386) to amplify weak signals. The pre-amp consists of NPN transistor Q1. Resistors R1 and R2 provide correct biasing and capacitor C3 provides coupling from the base of Q1 to the input signal. Capacitor C2 is used for filtering and capacitor C1 couples the amplified signal to the gain control potentiometer P1. This control applies only the amount of amplified signal you wish to the input of the IC power amp and serves as a volume control. The power amp contains many internal transistors and is used to provide a high level amplified signal to the output through coupling capacitor C5. Capacitor C6 sets the internal gain of IC1, and capacitor C4 is used to prevent "motor-boating" or low frequency oscillation.
7
Operating Instructions
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
The LED (light emitting diode) on the top of the wishing machine should light to indicate power when the machine is plugged into the wall. Operation: When testing the wishing machine, you must first install the antenna which simply screws into the hole on top of the unit. Then insert your sample under the plate and plug it in. Concentrate intensely on your wish and hold the thought for a few minutes or longer if possible. Then just walk away from the machine and leave it on for a while. Remember to try to think about your wish as much as possible throughout the next few days. This helps to amplify the effect.
8
9
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
10
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
11
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
12
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
13
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
14
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
15
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
16
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Parts Source Electronic
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Jameco: Electronic Components and Computer Products Phone: 1-800-831-4242 website: www.Jameco.com Address: 1355 Shoreway Rd., Belmont CA 94002-4100
All Electronics Corporation: New and surplus electronic parts and supplies Phone: 1-800-826-5432 website: www.allcorp.com Address: 905 S. Vermont Ave., Los Angeles, CA 90006 Hosfelt: Electronics inc. Phone: 1-800-524-6464 website: N/A Address: 2700 Sunset Blvd., Steubenville, OH 43952-1158 Mouser Electronics Phone: 1-800-346-6873 website: www.mouser.com Address: 958 N. Main, Mansfield, TX 76063-4827 Digi-Key: Your ultimate destination Phone: 1-800-344-4539 website: www.digikey.com Address: 701 Brooks Ave. South, Thief River Falls, MN 56701-0677 Electronic Goldmine: Catalog of high tech electronics and components Phone: 1-800-445-0697 website: www.goldmine-elec.com Address: P.O. Box 5408, Scottsdale, AZ 85261
Parts Small Parts Inc.: Engineering Findings Quality Components, Materials, and Tools Phone:1-800-220-4242 website: www.smallparts.com Address: 13980 N.W. 58th Court, P.O. Box 4650, Miami Lakes, FL 33014-0650 United States Plastic Corp.: World's Largest Assortment of Plastics Phone: 1-800-537-9724 website: www.usplastic.com Address: 1390 Neubrecht Rd., Lima OH 45801
17
For More Information Contact
Future Horizons, Inc. PO Box 125 Marquette, MI 49855 USA www.futurehorizons.net Copyright© 1998 Future Horizons
Future Horizons, Inc.
24-hour order line (888) 449-5197
P.O. Box 125
Fax (906) 249-1525
Marquette, MI 49855 U.S.A.
Email --
[email protected] Website -- http:/www.futurehorizons.net
About Future Horizons Advanced Technology We are a small research and development group dedicated to making secret, suppressed and controversial information accessible to interested individuals. Our goal is to develop new advanced technologies and concepts to reveal, and validate technology that has been suppressed over the past 70 years by big business, and big government. We will help move mankind into the 24th century and beyond. Most of the various items we deal with are considered fringe or even a bit crazy by the masses. Our goal is to attempt to validate those items, and produce working models in order to prove their validity. Some of the various technologies we currently deal with include
Free-Energy
Flying Saucers
Antigravity
Ultrasonics
Psionics
Lasers
Alternative Fuels
Bionics
Space-Age Weapons
High Voltage
Time Travel
Surveillance
UFO’s
Pyrotechnics
New Age Medicine
Plasma sabers
Strange Science
Ion-Propulsion
Hoverboards
Psychic Energy
Jetpacks
And more
18