16/7/2015
Handover Featur e Par am eter Descr iption
GSM BSS GBSS15.0
Handover Feature Parameter Description Iss ue
01
Da te
20 13 -0 5-0 6
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd. Address:
Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republi c of China
Website: Email:
http://www.huawei.com
[email protected]
Contents 1 About This Document 1.1 Scope 1.2 Intended Audience
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
1/201 1/201
16/7/2015
Handover Feature Parameter Description 1.3 Change History
2 Overview 2.1 Introduction 2.2 Feature Support by NE
3 Technical Description 3.1 Measurement Report Processing 3.2 Handover Preprocessing 3.3 Forced Handover 3.4 Handover Decision Based on Handover Algorithm I 3.4.1 Quick Handover 3.4.2 TA Handover 3.4.3 BQ Handover 3.4.4 Rapid Level Drop Handover 3.4.5 Interference Handover 3.4.6 Handover Due to No Downlink Measurement Report 3.4.7 Enhanced Dual-Band Network Handover 3.4.8 Load Handover 3.4.9 Enhanced Load Handover 3.4.10 Edge Handover 3.4.11 Fast-Moving Micro Cell Handover 3.4.12 Inter-Layer Handover 3.4.13 PBGT Handover 3.4.14 AMR Handover 3.4.15 SDCCH Handover 3.4.16 Other Handovers 3.5 Handover Decision Based on Handover Algorithm II 3.5.1 Quick Handover 3.5.2 TA Handover 3.5.3 BQ Handover 3.5.4 Interference Handover 3.5.5 Handover Due to No Downlink Measurement Report 3.5.6 Enhanced Dual-Band Network Handover 3.5.7 Load Handover 3.5.8 Edge Handover 3.5.9 Fast-Moving Micro Cell Handover 3.5.10 Better-Cell Handover 3.5.11 SDCCH Handover 3.5.12 Other Handovers
4 Related Features 5 Impact on the Network 5.1 HUAWEI I Handover and HUAWEI II Handover 5.2 Direct Retry 5.3 SDCCH Handover 5.4 Processing of Measurement Report 5.5 Pre-processing of Measurement Report 5.6 Fast Move Handover 5.7 Chain Cell Handover 5.8 BTS power lift for handover 5.9 AMR FR/HR Dynamic Adjustment
6 Engineering Guidelines 6.1 When to Use Handover 6.1.1 HUAWEI I Handover 6.1.2 HUAWEI II Handover 6.1.3 Direct Retry 6.1.4 SDCCH Handover 6.1.5 Processing of Measurement Report 6.1.6 Pre-processing of Measurement Report 6.1.7 Fast Move Handover 6.1.8 Chain Cell Handover 6.1.9 BTS power lift for handover 6.1.10 AMR FR/HR Dynamic Adjustment 6.2 Information to Be Collected 6.2.1 HUAWEI I Handover 6.2.2 HUAWEI II Handover 6.2.3 Direct Retry 6.2.4 SDCCH Handover 6.2.5 Processing of Measurement Report 6.2.6 Pre-processing of Measurement Report 6.2.7 Fast Move Handover 6.2.8 Chain Cell Handover 6.2.9 BTS power lift for handover 6.2.10 AMR FR/HR Dynamic Adjustment
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
2/201 2/201
16/7/2015
Handover Featur e Par am eter Descr iption 6.3 Network Planning 6.4 Deploying HUAWEI I Handover 6.4.1 De ploym ployment ent R equirements 6.4.2 Precautions 6.4.3 Feature Activation 6.4.4 Activation Observation 6.4.5 Deactivation 6.5 Deploying HUAWEI II Handover and AMR FR/HR Dynamic Adjustment 6.5.1 De ploym ployment ent R equirements 6.5.2 Precautions 6.5.3 Feature Activation 6.5.4 Activation Observation 6.5.5 Deactivation 6.6 Deploying Direct Retry 6.6.1 De ploym ployment ent R equirements 6.6.2 Feature Activation 6.6.3 Activation Observation 6.6.4 Deactivation 6.7 Deploying Pre-processing of Measurement Report 6.7.1 De ploym ployment ent R equirements 6.7.2 Feature Activation 6.7.3 Activation Observation 6.7.4 Deactivation 6.8 Deploying Fast Move Handover 6.8.1 De ploym ployment ent R equirements 6.8.2 Feature Activation 6.8.3 Activation Observation 6.8.4 Deactivation 6.9 Deploying Chain Cell Handover 6.9.1 De ploym ployment ent R equirements 6.9.2 Feature Activation 6.9.3 Activation Observation 6.9.4 Deactivation 6.10 Deploying BTS power lift for handover 6.10.1 De ploym ployment ent R equirements 6.10.2 Feature Activation 6.10.3 Activation Observation 6.10.4 Deactivation
7 Parameters 8 Counters 9 Glossary 10 Reference Documents
1 About This Document 1.1 Scope
This document describes the Handover feature, including its working principles, feature dependencies, network impact, and engineering guidelines. It also introduces the overall procedure of Huawei handover algorithms and describes the handover decision algorithms. 1.2 Intended Audience
This document is intended for: Personnel who need to understand the Handover feature Personnel who work with Huawei GSM products 1.3 Change History
This section provides information about the changes in different document versions. There are two types of changes, which are defined as follows: Feature change: refers to a change in the Handover feature of a specific product version. Editorial change: refers to a change in wording or the addition of information that was not described in the earlier version. Document Issues
The document issue is as follows: 01 (2013-05-06) Draft A (2013-02-27) 01 (2013-05-06)
This is the first release of GBSS15.0. Compared with iss ue draft A (2013-02-27), (2013-02-27), iss ue 01 (2013-05-06) (2013-05-06) has no change. Draft A(2013-02-27)
This is a draft. Compared with issue 02 (2012-12-31) of GBSS14.0, draft A (2013-02-27) of GBSS15.0 incorporates the changes described in the following table. Change Type
Change Descri ption
Parameter Change
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
3/201 3/201
16/7/2015
Handover Featur e Par am eter Descr iption
Feature c hange
Added s ec tion 2.2 Feature Support by NE. NE . None Added descriptions abou aboutt CME configuration configuration in chapter6 chapter 6 Engineering Guidelines. Guidelines. Deleted descriptions about the GBFD-115522 Dynamic HR/FR Adaptation feature. This feature is now described in Dynamic Channel Conversion Feature Parameter Description.
Editorial change
None
None
2 Overview 2.1 Introduction 2.2 Feature Support by NE
Table 2-1 Feature support by NE Feature
BSC6900
BSC6910
GBTS
eGBTS
HUAW EI I Handover
√
√
√
√
Direc t Retry
√
√
√
√
SDCCH Handov er
√
√
√
√
Processing of Measurement Report
√
√
√
√
Pre-processing of Measurement Report
√
√
√
√
AMR FR/HR Dynamic Adjustment
√
√
√
√
Dy namic HR/FR Adaptation
√
√
√
√
Fas t Mov e Handover
√
√
√
√
Chain Cell Handover
√
√
√
√
HUAW EI II Handover
√
√
√
√
BTS power lift for handover
√
√
√
√
NOTE:
√ indicates that the NE supports this feature. × indicates that the NE does not support this feature.
3 Technical Description 3.1 Measurement Report Processing
This section describes the features GBFD-110801 Processing of Measurement Report and GBFD-110802 Pre-processing of Measurement Report. Measurement report processing involves measurement report interpolation and filtering. NE Selection for Measurement Report Processing
The processing can be performed either on the BSC side or on the BTS side. If BTSMESRPTPREPROC is set to BSC_Preprocessing(BSC preprocessing), the processing is performed on the BSC side. If BTSMESRPTPREPROC is set to BTS_Preprocessing(BTS preprocessing), the processing is performed on the BTS side. By setting the parametersPRIMMESPPT , BSMSPWRLEV , and MRPREPROCFREQ , you can specify the contents of the MRs to be provided and the period during which the MRs are provided. This decreases the signaling traffic on the Abis interface and the traffic volume processed by the BSC. Data Selection for Measurement Report
MRs can be classified into enhanced MRs and normal MRs. The parameter MEASURETYPE determines the type to be used. In an MR, the TCH measurement of the serving cell is classified into FULL SET and SUB SET. Measurement Measurem ent Report Interpolation
The neighboring cell indexes are found on the basis of the BCCH ARFCNs and BSICs provided by the MS. Then, the uplink and downlink measurement results are obtained from the MRs. If MRs are issued continuously, they are directly added to the MR list. If MRs are not issued continuously and the number of lost MRs is less than the value of MRMISSCOUNT , the system performs operations as follows: If MrIntrplOptSwitch is set toNO(No): For the serving cell, handover algorithm I performs the linear interpolation for the MRs. The lowest values are applied to the interpolation of MRs by handover algorithm II according to the protocols; that is, level 0 (–110 dBm) and quality 7 are applied in the interpolation. For a neighboring cell, handover algorithm I and handover algorithm II use the lowest values stipulated in the protocols for the lost signal level; that is, level 0 (–110 dBm) is used in the interpolation. If MrIntrplOptSwitch is set to YES(Yes): For the serving cell, handover algorithm I and handover algorithm II perform the linear interpolation for the MRs. For a neighboring cell, handover algorithm I and handover algorithm II perform the linear interpolation for the MRs. If MRs are not issued continuously and the number of lost MRs is greater than the value of MRMISSCOUNT , the previous MRs are discarded. When new MRs are issued, calculation is done again. Measurement Report Filtering
Filtering is performed on MRs obtained continuously from the MR list. Averaging is performed on uplink/downlink receive level, uplink/downlink receive quality, Timing Advance (TA), Radio Quality Indication (RQI), BTS power, neighboring GSM cell level, Common Pilot Channel (CPICH), received signal code power (RSCP), and Ec/No of neighboring Universal Mobile Telecommunications System (UMTS) cell. The averaging minimizes the effect on the result of handover decision due to sudden changes in the measurement values. Power control compensation needs to be performed for the downlink receive level of the serving cell by the handover algorithm II. If you compare the receive level of the serving cell after the power control with that of all BCCH TRXs of the neighboring cell, there is no mapping between them. In situations where the cells overlap severely, the handover is easily triggered, causing the ping-pong handover. After the power control compensation is performed, the receive level of the serving cell can reflect the coverage condition of the BCCH TRX of the serving cell. The power control compensation of the serving cell is performed after the interpolation processing and before the filtering processing. In general, the compensation of power control is calculated by adding the downlink receive level of the serving cell and twice the current downlink transmit POWL of the BTS.
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
4/201 4/201
16/7/2015
Handover Featur e Par am eter Descr iption
The number of consecutive MRs required for filtering is determined by the measurement object and channel type. See Table 3-1 3-1 for details. Table 3-1 Parameters related to the number of MRs Measurement Object
Channel Type
Receive Receive level level of the servin servingg cell cell
SDCCH SDCCH TCH
Quality lity of the the ser servin ving cell cell
TA of the s erving cell
Parameter
NSIGSTRFLTLEN SSLENSD
SDCC SDCCH H
QLENSI
TCH
DATAQUAFLTLEN
TCH
TAFLTLEN
SDCCH
Receive level of the neighboring neighboring cell BCCH
SDCCH
TASIGSTRFLTLEN NCELLFLTLEN
NSIGSTRFLTLEN
Power of of the BTS in the serving cell TCH
DATASTRFLTLEN
RQI
QLENSD
TCH
If consecutive MRs are insufficient, the filtering fails. The handover decision is not performed. 3.2 Handover Preprocessing Handover Penalty
According to the neighborin neighboringg cell information in an MR and the parameters, parameters, the syst em performs performs hand handover over preprocessing preprocessing and adjusts the priorities priorities of neighboring neighboring cells. The handover penalty is performed after successful fast-moving micro cell handover, timing advance (TA) handover, Bad Quality (BQ) handover, fast-moving micro cell handover, OL subcell to UL subcell handover within an enhanced concentric cell, and after the handover failures. In handover algorithm II, in addition to the situations mentioned above, the handover penalty is also performed after successful or failed load handover and interference handover. NOTE:
In the handover decision procedure of handover algorithm II, the handover penalty is performed after the network characteristics adjustment and before the emergency handover decision. Handover penalty inheritance enables an MS to inherit its penalty state after the MS is successfully handed over to another cell. After a quick hand handover, over, TA hand handover, over, BQ hand handover, over, or load hand handover over (in hand handover over algorithm algorithm II) is successf ully performed, performed, the pena penalty lty level is subtracted from the actual receive level of the original cell during the penalty period. Table 3-2 3-2 lists the parameters related to handover penalty. Table 3-2 Parameters related to handover penalty Handover
Parameter
Quick handover
TIMEPUNISH HOPUNISHVALUE QuickHoPunishSw
TA Handover
SSTAPUNISH TIMETAPUNISH
BQ Handover
SSBQPUNISH TIMEBQPUNISH
Load handover (handover algorithm II) LOADHOPENTIME LOADHOPENVALUE LoadHoPunishInheritSwitch
After a fast-moving micro cell hand handover over is successf ully performed, performed, pena penalty lty is performed performed on all the neighboring neighboring cells of the micro cell. Related parameters parameters are SDPUNVAL andSPEEDPUNISHT . If an MS fails to initiate an intra-cell adaptive multirate (AMR) TCHF to TCHH handover, it cannot initiate another intra-cell AMR TCHF to TCHH handover within TIMEAMRFHPUNISH . In handover algorithm II, after the interference handover is initiated, initiating this handover again is not allowed within INTERFEREHOPENTIME regardless of whether the handover is successful or not. After an OL subcell to UL subcell hand handover over within an enha enhanced nced concentric cell is successf ul, the hand handover over from UL subcell to OL subcell is not allowed within UTOOHOPENTIME . After an OL cell to UL cell hand handover over in the enha enhanced nced dual-band dual-band network is successf ul, the hand handover over from UL cell to OL cell is not allowed within HOPENALTYTIME . After a hand handover over fails, different pena penalties lties are performed performed on the target cell based on the causes: If a handover to a neighboring GSM or UMTS cell fails, the actual receive level of the target cell is subtracted by FAILSIGSTRPUNISH for neighboring cell ranking during the penalty. NOTE:
Based on the handover failure cause, the penalty time could be UMPENALTYTIMER , RSCPENALTYTIMER , or PENALTYTIMER . If an OL subcell to UL subcell handover within a concentric cell fails, the handover from OL subcell to UL subcell is not allowed within TIMEOTOUFAILPUN . If a UL subcell to OL subcell handover within a concentric cell fails, the handover from UL subcell to OL subcell is not allowed within TIMEUTOOFAILPUN . Basic Ranking
Basic ranking is performed after handover penalty to generate a candidate cell list in descending order taking the following information into account: receive levels of the serving cell and neighboring cells carried in the MRs, hysteresis, usage of TCHs in the neighboring cells, and so on. In the case of non-directed retry, if an MS in an external BSC cell occupies an SDCCH and INRBSCSDHOEN is set toNO(No), this cell should be removed from the candidate cell list. In other words, the handover to this external BSC cell is prohibited. If a neighboring GSM cell and the serving cell are controlled by the same BSC and the TCH usage of the neighboring cell is 100%, the neighboring cell should be removed from the candidate cell list; that is, the handover to this neighboring cell is prohibited. If the downlink receive level of a neighboring GSM cell is less than the sum of HOCDCMINDWPWR andMINOFFSET , the neighboring cell should be removed from the candidate cell list; that is, the handover to this neighboring cell is prohibited. If the uplink receive level of a neighboring GSM cell is less than the sum of HOCDCMINUPPWR andMINOFFSET , the neighboring cell should be removed from the
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
5/201 5/201
16/7/2015
Handover Featur e Par am eter Descr iption candidate cell list; that is, the handover to this neighboring cell is prohibited. If a neighboring UMTS cell is a frequency division duplex (FDD) cell, the cell is processed according to FDDREP : If FDDREP is set toEcN0(Ec/N0), and the Ec/No of a neighboring cell is less than MINECNOTHRES , the neighboring cell should be removed from the candidate cell list; that is, the handover to this neighboring cell is prohibited. If FDDREP is set toRSCP(RSCP), and the received signal code power (RSCP) of a neighboring cell is less than MINRSCPTHRES , the neighboring cell should be removed from the candidate cell list; that is, the handover to this neighboring cell is prohibited. If a neighboring UMTS cell is a time division duplex (TDD) cell and the RSCP after penalty is less than the MINRSCPTHRES , the neighboring cell should be removed from the candidate cell list; that is, the handover to this neighboring cell is prohibited. Calculate the difference between the downlink receive level of the neighboring cells and the downlink receive level of the serving cell. Based on the difference, rank the neighboring cells in descending order.
Network Characteristics Adjustment
Factors considered during network characteristics adjustment have higher priorities than those considered during basic ranking. During network characteristic adjustment, the following factors are considered based on their priorities from high to low: Whether the serving cell and a neighboring cell share the same BSC or MSC Load in a cell Layer where a cell is located After performing performing basic ranking on all candidate candidate cells based on their priorities, priorities, the BSC ranks these cells again to determine determine their comprehensive comprehensive priorities. priorities. After network characteristics adjustment, the BSC gene generates rates a final candidate cell list (including the serving cell and neighboring neighboring cells). The candidate cells are ranked based on their priorities from high to low. Then, the BSC starts the handover decision procedure. If HOPRIOMODEN is set to NO(No): In handover algorithm II, the emergency handover decision is made before network characteristics adjustment and forced handover and after handover penalty (except load handover penalty) and basic ranking. Load handover penalty is performed before network characteristics adjustment and after an emergency handover. After the emergency handover decision, LOADHOPENVALUE is subtracted from the signal level of the original cell within the time specified by LOADHOPENTIME if the load handover is successful. After load handover penalty, the signal level of the target cell changes. Therefore, the network characteristics need to be readjusted. If HOPRIOMODEN is set to YES(Yes): In handover algorithm II, all handover decisions are made after handover penalty, basic ranking, network characteristics adjustment, and forced handovers. In handover algorithm I, all handover decisions are made after handover penalty, basic ranking, and network characteristics adjustment. 3.3 Forced Handover
A forced handover handover does not require require a hand handover over decision. A forced handover handover is triggered triggered in the following scenarios: If no TCH is available in the serving cell which the MS attempts to access and DIRECTRYEN is set to YES(Yes), the BSC triggers a directed retry procedure. When a BTS is under maintenance, the MSs served by the BTS should be handed over to the cells controlled by a functional BTS. This ensures that no call drop occurs during the BTS maintenance. Directed Retry
When the MS initiates a call, after the BSC receives an ASSIGN REQ message from the MSC, the BSC determines an assignment mode based on the load of the serving cell. NOTE:
Assignment mode is categorized into normal normal assignment procedure, procedure, mode modification procedure, procedure, and directed retry procedure. procedure. The commands issued by the BSC vary according to the procedure. For a normal assignment procedure, the BSC activates a channel and issues a channel assignment command. For a mode modification procedure, the BSC issues a mode modification command. For a directed retry procedure, the BSC issues a handover command. If the serving cell is so overloaded that new calls cannot be admitted or admitting new calls will affect ongoing services, the BSC triggers a directed retry procedure. By using the directed retry, the MS is handed over to the target cell and part of the traffic in the serving cell is distributed to the target cell. This avoids traffic congestion in the serving cell. (GBFD-110607 Directed Retry) Figure 3-1 3-1 shows the procedure for a directed retry decision. Figure 3-1 Procedure for a directed retry decision
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
6/201 6/201
16/7/2015
Handover Featur e Pa rameter Description Description
When ASSLOADJUDGEEN is set to DISABLE(Disable), the BSC triggers a directed retry procedure after completing basic ranking if the load of the serving cell exceeds 100%. As shown in Figure 3-1, 3-1, directed retry is categorized into enhanced dual-band network directed retry and normal directed retry. Enhanced Dual-Band Network Directed Retry
In an enhanced dual-band network, two cells form a group and the MS camps on one of the two cells. After the directed retry is triggered, the MS is handed over to the other cell. For details on the conditions of triggering an enhanced dual-band network directed retry, see sections 3.4.7 Enhanced Dual-Band Network Handover and 3.5.6 Enhanced Dual-Band Network Handover . Target Cell Selection in a Normal Directed Retry Procedure
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions: The serving cell does not function as a target cell. Load of the candidate neighboring cells ≤ DTLOADTHRED In handover algorithm II, serving cell level < receive level of neighboring cells < serving cell level + DRHOLEVRANGE . In handover algorithm I, receive level of neighboring cells ≥ MINPWRLEVDIRTRY . If DRTAGCELLSELis set to YES(Yes), the MS can be handed over to one of multiple candidate cells by using directed retry. If DRTAGCELLSELis set to NO(No), the MS can be handed over to only one target cell. The number of available candidate cells is controlled by HOTRYCNT . 3.4 Handover Decision Based on Handover Algorithm I
This section describes the feature GBFD-110601 HUAWEI I Handover. According to the emergency emergency condition of an MS in the network, the handover handover decision based on hand handover over algorithm algorithm I is made in the following order: order: quick hand handover, over, emergency emergency handover, enhanced dual-band network handover, load handover, and normal handover. Handover decision based on handover algorithm I involves the following procedures: Determines whether the serving cell meets the trigger conditions. Selects corresponding candidate cells. In handover algorithm I, HOOPTSEL specifies whether a neighboring GSM or UMTS cell is preferred. When HOOPTSEL is set toPre_2G_Cell(Preference for 2G cell): A neighboring neighboring GSM cell is preferred. preferred. If the candidate cell list contains suitable neighborin neighboringg UMTS cells but no suitable neighboring neighboring GSM cells, a neighborin neighboringg UMTS cell is selected. When HOOPTSEL is set toPre_3G_Cell(Preference for 3G cell): A neighboring neighboring UMTS cell is preferred. preferred. If the candidate candidate cell list contains suitable neighboring neighboring GSM cells but no suitable neighboring neighboring UMTS cells, a neighboring neighboring GSM cell is selected. When HOOPTSEL is set toPre_2G_CellThres(Preference 2G cell by thresh): , a neighboring UMTS cell is preferred.
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
7/201 7/201
16/7/2015
Handover Featur e Par am eter Descr iption
If the trigger conditions for an emergency handover are met and there is at least one candidate cell, the emergency handover timer NEWURGHOMININTV is started. Another emergency handover decision can be performed only when NEWURGHOMININTV times out. 3.4.1 3.4. 1 Quick Hando ver
This section describes the features GBFD-510103 Chain Cell Handover and GBFD-510102 Fast Move Handover. Quick handover aims to increase the handover success rate of an MS moving at a high speed and to ensure the call continuity and low call drop rate. Quick handover applies to the scenario where an MS moves fast along an urban backbone road, a selected route, or a high-speed railroad. Quick Handover Types
Quick handover consists of frequency offset handover and fast move handover. Frequency offset handover Whether the MS moves away from the serving cell is determined based on the frequency offset information provided by an MS moving at a high speed. Frequency offset handover decision is made according to the uplink/downlink receive level of the serving cell and the path loss of neighboring cells. Fast move handover Fast move handover decision is made according to the path loss of neighboring cells. For quick handover, the handover response speed is enhanced by: Accurately calculating the move speed of the MS Lifting the restriction on the interval between handover decisions Reducing the number of MRs for the handover decision Introducing the alpha filtering Quick Handover Preparation
The preparation for quick handover involves the following aspects: Frequency offset is decoded from the MR. Frequency offset of the MS is obtained from the uplink MR that the BTS sends to the BSC. Alpha filtering is performed performed on the MR. Trigger Conditions
During the handover decision, it is first determined whether the trigger conditions for a frequency offset handover are met. When the BTS cannot send the frequency offset information or the reported frequency offset information is invalid, a fast move handover is triggered, provided that other conditions for a frequency offset handover are met. If QUICKHOEN is set to YES(Yes), the trigger conditions for a quick handover are as follows: The MS moves away from the serving cell (the frequency offset in the measurement result is a negative value) and the move speed of the MS is greater than MOVESPEEDTHRES . The filtered uplink level of the serving cell is less than HOUPTRIGE . The compensated downlink level of the serving cell is less than HODOWNTRIGE . The difference between the path loss of a chain neighboring cell and that of the serving cell is greater than the predefined threshold. The threshold is equal to the value of HOOFFSET (in the SET GCELLHOFAST command for an internal neighboring cell or in theMOD GEXT2GCELL command for an external neighboring cell) plus the value of ADJHOOFFSET for the serving cell. The trigger conditions for a quick handover are as follows: If all the last three conditions are met, the handover decision is made as follows: If the first condition is met, a frequency offset handover is triggered. If QUICKPBGTHOEN is set to YES(Yes) and the first condition is not met, a fast move handover is triggered. If QUICKPBGTHOEN is set to NO(No), a fast move handover is not triggered. If all the last three conditions are not met, a quick handover is not triggered. Target Cell Selection
The target cell must be a chain neighboring cell of the serving cell. The target cell can be obtained through the setting of ISCHAINNCELL. If HODIRFORECASTEN is set to
YES(Yes), a neighboring cell in the moving direction of the MS is selected preferentially.
To forecast the moving direction of the MS, the direction of a chain neighboring cell (A or B) compared with the serving cell is specified by CHAINNCELLTYPE . If the number of times that the MS is handed over to neighboring cells in the same direction (B for example) is greater than or equal to HODIRLASTTIME when the handover time reaches HODIRSTATIME , the MS is inferred to be moving towards the B direction. Subsequently, the MS is preferentially handed over to the neighboring cell whose CHAINNCELLTYPE is B. Limitations
The limitations on quick handover are as follows: The serving cell cannot be selected as the target cell. The candidate cells for quick handover must be chain neighboring cells of the serving cell. After a quick hand handover over is successf ul, the penalty is performed performed on the original original cell during during the pena penalty lty time to prevent prevent an immediate hand handover over back to the original original cell. The penalty time and penalty value are specified by TIMEPUNISH andHOPUNISHVALUE respectively. 3.4.2 TA Handover
TA handover is a type of emergency handover. The TA handover decision is made according to the TA value reported by the MS. The TA value of a normal cell ranges from 0 to 63 and that of an extended cell ranges from 0 to 229. The TA can be stepped up or down in steps of 553.5 m. The TA value of 63 corresponds to a distance of 35 km. Trigger Conditions
TA handover is triggered when the following conditions are met: TAHOEN is set to YES(Yes).
Filtered TA value in the MR provided by the MS is greater than or equal to TALIMIT . NOTE:
From the perspective of the trigger conditions for a TA handover, TA can be regarded as a limitation to the size of a cell. Target Cell Selection
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions:
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
8/201 8/201
16/7/2015
Handover Feature Parameter Description The serving cell cannot be selected as the target cell. If TALIMIT of a co-site neighboring cell is less than or equal to theTALIMIT of the serving cell, a handover to the neighboring cell is prohibited.
If the trigger conditions for a TA handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. Limitations
After the TA handover is successf ul, the penalty is performed on the original cell. During TIMETAPUNISH , SSTAPUNISH is subtracted from the level of the original cell to prevent an immediate handover back to the original cell. 3.4.3 BQ Handover
BQ handover is a type of emergency handover in which the system makes the decision based on the uplink/downlink receive quality on the Um interface. The receive quality is measured in bit error rate (BER). The BSC measures the quality of a radio link based on the quality band in the MR. The probable cause of an increase in BER is that the signal power is too low or the channel interference increases. Trigger Conditions
If BQHOEN is set to YES(Yes), the BQ handover is triggered when either of the following conditions are met: The uplink receive quality is greater than or equal to the uplink receive quality threshold of the serving cell. The downlink receive quality is greater than or equal to the downlink receive quality threshold of the serving cell. The parameters for specifying the uplink and downlink receive quality thresholds are as follows: For non-AMR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMIT and the parameter for specifying the downlink receive quality threshold is DLQUALIMIT . For AMR FR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMITAMRFR and the parameter for specifying the downlink receive quality threshold is DLQUALIMITAMRFR . For AMR HR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMITAMRHR and the parameter for specifying the downlink receive quality threshold is DLQUALIMITAMRHR . Target Cell Selection
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions: If the target cell is a neighboring cell, the receive level of the target cell must meet the following condition: Filtered downlink receive level of the target cell > Filtered downlink receive level of the serving cell after compensation + (INTERCELLHYST of the serving cell configured for the neighboring cell – 64) – ( BQMARGIN – 64) NOTE:
In handover algorithm I, if there is only one cell in the candidate cell list and the cell is a neighboring cell, the preceding condition does not need to be met. If INTRACELLSINUSEREN is set to NO(No), no intra-cell handover is allowed within the time specified by BANTIME when multiple intra-cell handovers are performed consecutively. If INTRACELLSINUSEREN is set to YES(Yes), no quality-related intra-cell handovers (such as BQ handover, interference handover, TCHH-to-TCHH handover, and tight BCCH handover) is allowed within the time specified by BANTIME when the same MS consecutively performs multiple such types of handovers. An MS is handed over to the serving cell when the following conditions are met: Handover algorithm I is used. There is no neighboring cell. INTRACELLHOEN is set to YES(Yes). BADQUALHOOPTALLOW is set toNO(No) .
The serving cell is not in the intra-cell handover penalty state. Specifically, the MS is preferentially handed over to a channel with a different frequency band, different frequency, different TRX, or different timeslot (handover priority: channel with a different frequency band > channel with a different frequency > channel with a different TRX > channel with a different timeslot). An MS is not handed over to the serving cell if both INTRACELLHOEN andBADQUALHOOPTALLOW are set to YES(Yes) or if INTRACELLHOEN is set to NO(No) . If the trigger conditions for a BQ handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. Limitations
After the BQ handover is successful, the penalty is performed on the original cell. During TIMEBQPUNISH , SSBQPUNISH is subtracted from the level of the original cell to prevent an immediate handover back to the original cell. 3.4.4 Rapid Level Drop Handover
Rapid level drop handover is a type of emergency handover. In edge handover and PBGT handover, the mean value filtering and P/N decision methods are not responsive to short-period rapid level drop. Therefore, to solve the rapid level drop problem, the finite impact response filtering can be performed on the original receive level. This filtering method is responsive to the rapid level drop based on the drop slope of the original receive level. Trigger Conditions
If RXQCKFALLHOEN is set to YES(Yes), the trigger conditions for a rapid level drop handover are as follows: Filtered uplink level < ULEDGETHRES A1 x C(nt) + A2 x C(nt - t) + A3 x C(nt - 2t) + … + A8 x C(nt - 7t) < B where, A1 indicates FLTPARAA1 A2 indicates FLTPARAA2 A3 indicates FLTPARAA3 A4 indicates FLTPARAA4
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
9/201
16/7/2015
Handover Feature Parameter Description A5 indicates FLTPARAA5 A6 indicates FLTPARAA6 A7 indicates FLTPARAA7 A8 indicates FLTPARAA8 B indicates FLTPARAB
Target Cell Selection
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions: The target cell has a higher priority than the serving cell. The serving cell cannot be selected as the target cell. If the trigger conditions for a rapid level drop handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. 3.4.5 Interference Handover
In handover algorithm I, if INTERHOOPTALLOW is set to NO(No), interference handover is regarded as a type of emergency handover; if INTERHOOPTALLOW is set to YES(Yes), interference handover is not regarded as a type of emergency handover and the decision on interference handover is made after a decision on AMR handover is
made. Interference handover helps protect calls affected by interference and reduce network interference. It is applicable in scenarios with interference. In handover algorithm I, the difference between interference handover and BQ handover is as follows: In BQ handover, the bad signal quality resulting from both coverage and interference is checked. In interference handover, the bad signal quality resulting from coverage is not checked. Trigger Conditions
If INTERFHOEN is set to YES(Yes), the interference handover is triggered when either of the following conditions are met: The filtered value of uplink receive quality is greater than the specified receive quality threshold at the current uplink receive level. The filtered value of downlink receive quality is greater than or equal to the specified receive quality threshold at the current downlink receive level. The parameters for specifying the uplink and downlink receive quality thresholds are as follows: For non-AMR FR calls, the parameter for specifying the receive quality threshold is RXQUALn, where 1 ≤ n ≤ 12. For AMR FR calls, the parameters for specifying the receive quality threshold are RXQUALn (1 ≤ n ≤ 12) and RXLEVOFF . If n = 1, the receive quality threshold is RXQUAL1. If 2 ≤ n ≤ 12, the receive quality threshold is RXQUALn + RXLEVOFF . Target Cell Selection
In handover algorithm I, the target cell must have the highest priority in the candidate cell list. In addition, the target cell must meet the following conditions: If INTRACELLHOEN is set to YES(Yes) and the intra-cell handover penalty timer expires, the serving cell can be selected as the target cell. If both INTRACELLHOEN and INTERHOOPTALLOW are set to YES(Yes), only the serving cell can be selected as the target cell. If INTRACELLHOEN is set to YES(Yes) and INTERHOOPTALLOW is set toNO(No), either the serving cell or a neighboring cell can be selected as the target cell. If INTRACELLHOEN is set to NO(No), the serving cell cannot be selected as the target cell. NOTE:
If INTRACELLSINUSEREN is set to NO(No) , no intra-cell handover is allowed within the time specified by BANTIME when multiple intra-cell handovers are performed consecutively. If INTRACELLSINUSEREN is set to YES(Yes), no quality-related intra-cell handovers (such as BQ handover, interference handover, TCHH-to-TCHH handover, and tight BCCH handover) is allowed within the time specified by BANTIME when the same MS consecutively performs multiple such types of handovers. If the filtered level of a neighboring cell after handover penalty ≥ HOTHRES of the neighboring cell + INTELEVHOHYST – 64, this neighboring cell can serve as the target cell. If the trigger conditions for an interference handover are met but the candidate 2G cells are not suitable, the following operations need to be performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. Interference Handover Process
Figure 3-2 shows the interference handover process. Figure 3-2 Interference handover process
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
10/201
16/7/2015
Handover Feature Parameter Description
NOTE:
In Figure 3-2, "A" indicates the receive quality threshold under the current uplink or downlink signal level. For non-AMR FR calls, "A" ranges from RXQUAL1 toRXQUAL12 . For AMR FR calls, "A" equals RXQUAL1 or the sum of a value from RXQUAL2 toRXQUAL12 andRXLEVOFF . 3.4.6 Handover Due to No Downlink Measurement Report Handover due to no downlink measurement report is performed on the basis of the uplink quality. The purpose is to ensure the call continuity and minimize the possibility of call drops. Handover due to no downlink measurement report is generally caused by adverse radio environment on the uplink. In this case, the requirements of the filtering algorithm cannot be met, so other handover decisions cannot be performed. Trigger Conditions
In handover algorithm I, the trigger conditions for a no-DL-MR handover (referred to as no-DL-MR handover) are as follows: NODLMRHOEN is set to YES(Yes).
There is no downlink information in the MR of the call. The filtered value of uplink quality is greater than or equal to NODLMRHOQUALLIMIT . The number of lost downlink MRs is less than NODLMRHOALLOWLIMIT . For TCH, the number of saved MRs with uplink quality value is greater than DATAQUAFLTLEN ; for SDCCH, the number of saved MRs with uplink quality value is greater than QLENSI . In addition, the BSC triggers a no-DL-MR handover when MRs of the serving cell keep lost for NODLMRHOLASTTIME withinNODLMRHOSTATTIME . Target Cell Selection
In handover algorithm I, the conditions for selecting the target cell are as follows: The ranked neighboring cells recorded in the last complete MR are saved as candidate cells. A neighboring cell is preferentially selected as the target cell. If BADQUALHOOPTALLOW is set to YES(Yes), only a neighboring cell can be selected as the target cell. If no neighboring cell is available, or if BADQUALHOOPTALLOW is set to NO(No), the serving cell is selected as the target cell. 3.4.7 Enhanced Dual-Band Network Handover
Enhanced dual-band network handover is performed based on the traffic volume of the OL and UL cells and based on the receive level. Enhanced dual-band network handover is classified into the following types: Handover due to high load in the UL cell Handover due to low load in the UL cell Handover due to MS movement to the border of the OL cell Trigger Conditions for a Handover Due to High Load in the Underlaid Cell
The trigger conditions for a handover due to high load in the UL cell are as follows: The two cells are in the enhanced dual-band network and OUTLOADHOENABLE is set to YES(Yes). The MS supports the frequency band on which the OL cell operates. The handover due to high load in the UL cell is performed only on TCHs. The load in the UL cell is greater than or equal to OUTGENOVERLDTHRED. The load in the OL cell is less than INNSERIOVERLDTHRED . The system traffic volume is less than or equal to EDBSYSFLOWLEV .
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
11/201
16/7/2015
Handover Feature Parameter Description The current call is within the handover margin, and the sum of the receive level in the overlaid subcell and that in the underlaid subcell is greater than or equal to INTOINNREXLEVTHRED . The receive level in the underlaid subcell minus the receive level of the optimal neighboring cell is greater than the sum of ATCBTHRED and ATCBHYST .
When all the preceding conditions are met, the handover due to high load in the UL cell is triggered. If the load of the UL subcell in the cell is greater than or equal toOUTSERIOVERLDTHRED , the handover margin is adjusted in a period of OUTLOADHOPERIOD subtracted by OUTLOADHOMODPERI . The step length for handover margin adjustment is specified by OUTLOADHOSTEP . Trigger Conditions for a Handover Due to Low Load in the Underlaid Cell
The trigger conditions for a handover due to low load in the UL cell are as follows: The load in the UL cell is less than OUTLOWLOADTHRED. The system traffic volume is less than or equal to EDBSYSFLOWLEV . The current call is within the handover margin and the receive level is greater than or equal to OUTINNREXLEVTHRED . When all the preceding conditions are met, the handover due to low load in the UL cell is triggered. If the load of the UL subcell in the cell is less than OUTLOWLOADTHRED for a specified period, the handover margin is adjusted in a period of INNLOADHOPERI . The step length for handover margin adjustment is specified by INNLOADHOSTEP . Trigger Conditions for a Handover Due to MS Movement to the Border of the Overlaid Cell
The trigger conditions for a handover due to MS movement to the border of the OL cell are as follows: SS(s) < Thdouter SS(u) – SS(n) < ATCB_THRD – ATCB_HYST where, SS(s): specifies the filtering compensated downlink receive level in the serving cell. Thdouter: specifies OUTINNREXLEVTHRED . SS(u): specifies the downlink level (power compensation is performed on the downlink level based on the measurement) of the UL subcell where the call is originated. If the SS(u) value cannot be obtained, the decision of enhanced dual-band network handover is not performed and the decision condition is met by default. SS(n): The best neighboring cell is the one whose measured BCCH level is the highest among neighboring cells. SS(n) is the signal level of the best neighboring cell that works on the same frequency band, locates at the same layer, and has the same priority as the UL cell but is not co-sited with the UL cell. If such a neighboring cell is not available, the value of SS(n) is –110 dBm. ATCB_THRD: specifies ATCBTHRED . ATCB_HYST: specifies ATCBHYST . Handover due to MS movement to the border of the OL cell is triggered if either of the preceding conditions is met. NOTE:
In the Adapter distance To Cell Border (ATCB) handover algorithm, the border between the OL and UL subcells is determined according to the signal strength of the serving cell and that of neighboring cells. If SS(s) = SS(n), the system considers that the MS is located at the border of the UL cell. If SS(s) – SS(n) > ATCB_THRD, the syst em considers that the MS is located in the coverage area of the OL subcell. The coverage area of the OL subcell is determined according to different networking and coverage conditions of the existing network. In addition, the OL subcell of the serving cell and the OL subcell of the neighboring cells will not overlap regardless of the distance between BTSs. The handover margin specifies the range of signal level. In the case of OL/UL load handover on the enhanced dual-band network, the MSs whose downlink levels are within the handover margin are handed over level by level. Target Cell Selection
The requirements for target cell selection in the enhanced dual-band network are as follows: For the handover due to high load in the UL cell, the MS must be handed over to the OL cell. For the handover due to low load in the UL cell, the MS must be handed over to the UL cell. For the handover due to MS movement to the border of the OL cell, the MS is handed over to the neighboring cell that ranks first among neighboring cells. The MS should not be handed over to the cell that ranks after the serving cell. Generally, the target cell is the UL cell. The target cell can also be another neighboring cell. Limitations
The limitations on the handover due to high load in the UL cell are as follows: If the cell where the call is located is on an enhanced dual-band network, CELLINEXTP is set to Extra(Extra). The OUTLOADHOENABLE parameter should be set. The maximum range of the handover margin is from 63 to INTOINNREXLEVTHRED . The MS with the highest receive level is handed over first. The limitations on the handover due to low load in the UL cell are as follows: If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to Inner(Inner). The INNLOADHOEN parameter should be set. The maximum range of the handover margin is from 63 to OUTINNREXLEVTHRED . The MS with the lowest receive level is handed over first. The limitations on the handover due to MS movement to the border of the OL cell are as follows: If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to Inner(Inner). Impact of the Enhanced Dual-Band Network Handover on the Existing Algorithm
The impact of the enhanced dual-band network handover on the existing algorithm is as follows: On the enhanced dual-band network, the MS should not be handed over to a cell in the same UL/OL cell group when the load handovers between the OL cell and the UL cell (specified by OUTLOADHOENABLE andINNLOADHOEN ) are allowed. This is to prevent a load handover of a normal cell from colliding with a load handover between the OL cell and the UL cell on the network. The PBGT handover algorithm may cause inter-cell handovers. Therefore, to avoid ping-pong handovers, PBGT handovers are restricted in either of the following conditions: When INNLOADHOEN is set to YES(Yes), PBGT handovers from the underlaid subcell to the overlaid subcell are prohibited. When OUTLOADHOENABLE is set to YES(Yes), PBGT handovers from the overlaid subcell to the underlaid subcell are prohibited. 3.4.8 Load Handover
In the network, some cells carry heavy load whereas the overlapping upper-layer cells and the neighboring cells may carry light load. The load handover is required to balance the load of these cells.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
12/201
16/7/2015
Handover Feature Parameter Description
In a load handover procedure, some load in heavy-load cells is switched to light-load cells. Meanwhile, the load in neighboring cells is not switched to heavy-load cells. Load handover can be performed between cells at different layers. Figure 3-3 shows the details. NOTE:
For details about the inter-RAT load handover, see Interoperability Between GSM and WCDMA Feature Parameter Description. Figure 3-3 Load handover between cells
To perform load sharing, increase DLEDGETHRES , so that the load at the border of a cell is switched to a neighboring cell with light load. Whether a cell carries heavy load or light load is determined by the traffic volume in the cell, that is, whether the traffic volume (generally TCH usage) in the cell exceeds the preset threshold. The TCH usage is calculated using the following formula: TCH usage = (Number of occupied TCHFs x 2 + Number of occupied TCHHs)/(Number of available TCHFs x 2 + Number of available TCHHs) where Number of available TCHHs is the sum of idle and occupied TCHHs. Number of available TCHFs is the sum of idle and occupied TCHFs. If the traffic volume in a cell is greater than TRIGTHRES , the load in this cell is heavy. The load handover algorithm needs to be enabled. If the traffic volume in a cell is less than LoadAccThres, the load in this cell is light and the cell can receive load from the heavy-load cells. Load handover may lead to many handovers. Therefore, the load of the system CPU should be considered before load handover is performed. In other words, the system traffic volume should be taken into account. In addition, to prevent too many MSs from being handed over at a time, load handover is performed step by step. In other words, the edge handover threshold is increased on the basis of LOADHOSTEP (CLS_Ramp) and LOADHOPERIOD (CLS_Period). When the increase in the edge handover threshold equals LOADOFFSET (CLS_Offset), the edge handover threshold is not increased any more. SeeFigure 3-4 for details. Figure 3-4 Load handover
Trigger Conditions
If LoadHoEn is set to YES(Yes), the trigger conditions for a load handover are as follows: The CPU usage of the system is less than or equal to SYSFLOWLEV . The current load of the serving cell is greater than or equal to TRIGTHRES . Target Cell Selection
The conditions for selecting the target cell are as follows: Filtered receive level after handover penalty ≥ HOTHRES + INTELEVHOHYST – 64 The serving cell cannot be selected as the target cell. If the target cell and the serving cell are in the same BSC, a load handover is performed when the current load of the target cell is less than LoadAccThres. If the target cell and the serving cell are not in the same BSC, a load handover is performed when the load of the target cell is less than LoadAccThres and OutBscLoadHoEn is set to YES(Yes). Load Handover Process
Figure 3-5 shows the load handover process. Figure 3-5 Load handover process
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
13/201
16/7/2015
Handover Feature Parameter Description
Examples
The system assigns MSs to different load handover margins based on the downlink receive level. The load handover algorithm is used to hand over the MSs out of a cell step by step. 1. The MSs in load handover margin 1 are handed over to the neighboring cells. Load handover margin 1 specifi es the area where the downlink level ranges from DLEDGETHRES to the sum of DLEDGETHRES andLOADHOSTEP . 2. After a LOADHOPERIOD elapses, the MSs in load handover margin 2 are handed over to the neighboring cells. Load handover margin 2 specifies the area where the downlink level ranges from DLEDGETHRES to the sum of DLEDGETHRES and (2 xLOADHOSTEP ). 3. The load handover stops when the traffic volume in the cell is less than or equal to TRIGTHRES . The load handover is performed step by step to prevent call drops caused by a sudden increase in CPU load or the congestion in the target cell. 3.4.9 Enhanced Load Handover
Like the load handover, the enhanced load handover is used to balance load of cells in a network. Unlike the load handover, the enhanced load handover considers the handover quality and the load in the target cell before the handover is performed. In this way, the possibility of low level and congestion due to heavy load in the target cell after the handover is minimized. The enhanced load handover is applicable to the scenario where multiple base stations are located at the same place. Trigger Conditions for an Enhanced Load Handover
If LOADHOAD is set to YES(YES), the trigger conditions for an enhanced load handover are as follows: The CPU usage of the current system is less than or equal to SYSFLOWLEV . The load of the serving cell is greater than TRIGTHRES . Here, the load of the serving cell is expressed in the percentage of the channels that are occupied. If the built-in PCU is used, the calculation method of the cell load depends on the setting of LOADSTATYPE . The setting of the parameter determines whether the dynamic PDCHs that can be preempted are considered as occupied channels. When LOADSTATYPE is set to NODYNPDCH(Not count dynamic PDCH), the dynamic PDCHs that can be preempted are not considered in the cell load. When LOADSTATYPE is set to DYNPDCHAS OCCUPY(Count dynamic PDC H(Occupy)), the dynamic PDCHs that can be preempted are considered as
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
14/201
16/7/2015
Handover Feature Parameter Description occupied TCHs in the cell load. When LOADSTATYPE is set to DYNPDCHASIDLE(Count dynamic PDCH(Idle)), the dynamic PDCHs that can be preempted are considered as idle TCHs in the cell load.
The number of the dynamic PDCHs that can be preempted depends on the number of dynamic PDCHs and DYNCHNPREEMPTLEV . The number of dynamic PDCHs is the total number of channels whose CHTYPE is set to FULLTCH. If the external PCU is used, the number of the dynamic PDCHs that can be preempted is always zero. The setting of LOADSTATYPE is irrelevant to calculation of the cell load. Target Cell Selection
When a candidate cell satisfying the following conditions is found and not a single MS within the range specified by LOADHOUSRRATIO is handed over to the target cell, further search of the target cell is stopped and current traffic is handed over to the candidate cell. The detailed conditions for selecting the target cell are as follows: The value of LOADHOPBGTMARGIN is not 0 and the path loss in the serving cell minus that in the target cell is greater than LOADHOPBGTMARGIN . The load of the target cell is less than LoadAccThres. The receive level of the target cell is greater than HOTHRES of the target cell plusINTELEVHOHYST of the handover from the serving cell to the target cell. Of all the MSs that are within the range specified by LOADHOUSRRATIO and meet the preceding conditions, only one MS can initiate the handover at a time. This regulation prevents too many MSs from being handed over to the target cell at one time and avoids congestion in the target cell. 3.4.10 Edge Handover
Edge handover is performed on the basis of receive level. To trigger an edge handover, the receive level of the target cell should be at least one hysteresis value (specified by INTERCELLHYST – 64) greater than the receive level of the serving cell. Trigger Conditions
If FRINGEHOEN is set to YES(Yes) andEDOUTHOADEN is set to NO(No), the trigger conditions for an edge handover are as follows: Either of the following conditions is met: The filtered downlink receive level of the serving cell after compensation is less than DLEDGETHRES . The filtered uplink receive level of the serving cell after compensation is less than ULEDGETHRES . Filtered d ownlink receive level of a neighboring cell after power control compensation > Receive level of the serving cell + (INTERCELLHYST – 64) An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are met for EDGELAST1 withinEDGESTAT1. If both FRINGEHOEN and EDOUTHOADEN are set to YES(Yes), the trigger conditions for an edge handover are as follows: Either of the following conditions is met: Filtered downlink receive level of the serving cell after compensation < DLEDGETHRES + (EDOUTHOOFFSET – 64) Filtered uplink receive level of the serving cell after compensation < ULEDGETHRES + (EDOUTHOOFFSET – 64) Filtered downlink receive level of a neighboring cell after power control compensation > Receive level of the serving cell + ( INTERCELLHYST – 64) An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are met for EDGELAST1 within EDGESTAT1. NOTE:
If FRINGEHOEN is set to NO(No), EDOUTHOADEN andEDOUTHOOFFSET are invalid. Figure 3-6 shows an edge handover. Figure 3-6 Edge handover
Target Cell Selection
The target cell must have the highest priority among the candidate cells. In addition, it must meet the following conditions: The serving cell cannot be selected as the target cell. After cells are ranked, the target cell must have a higher priority than the serving cell. A cell becomes the target cell if the previous conditions are met for EDGEADJLASTTIME withinEDGEADJSTATTIME . If the trigger conditions for an edge handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of handover is made. 3.4.11 Fast-Moving Micro Cell Handover
Fast-moving micro cell handover is performed from a micro cell to a macro cell according to the relative speed of an MS so that the number of handovers can be minimized. Fast-moving micro cell handover applies to the following scenarios: If an MS is moving fast in a micro cell, it is handed over to a macro cell. Time penalty is performed on the micro cell to prevent an MS that is moving fast in a macro cell from entering a micro cell. This ensures that the fast-moving MS camps on the macro cell. Figure 3-7 shows a fast-moving micro cell handover. Figure 3-7 Fast-moving micro cell handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
15/201
16/7/2015
Handover Feature Parameter Description
Trigger Conditions
If QCKMVHOEN is set to YES(Yes), the handover decision procedure of fast-moving micro cell handover is as follows: When the trigger conditions for an edge handover or PBGT handover are met, the fast-moving micro cell handover decision is started. When the period during which the MS camps on the serving cell is shorter than QCKTIMETH , the number of cells through which the fast-moving MS passes is incremented by one. NOTE:
The cells counted by the system must locate at a layer lower than layer 4. In other words, it must be a non-Umbrella cell. When the number of cells that the MS passes in fast movement reaches QCKSTATCNT , the fast-moving micro cell handover is triggered if the number of cells that the MS passes in fast movement counted by the system is greater than or equal to QCKTRUECNT . Target Cell Selection
In handover algorithm I, the target cell must have the highest priority in the candidate cell list. In addition, the target cell must meet the following conditions: The target cell must be at layer 4, that is, Umbrella cell. Filtered receive level of the target cell ≥ HOTHRES + INTELEVHOHYST – 64 Limitations
After the fast-moving micro cell handover is successf ul, the penalty is performed on all the neighboring micro cells. DuringSPEEDPUNISHT , SDPUNVAL is subtracted from the receive level of every neighboring micro cell. Cell Layer and Cell Priority
With Huawei multiband handover algorithm, a proper traffic volume distribution can be realized among multiple frequency bands. Huawei multiband handover algorithm divides cells into four layers, with 16 priorities at each layer. The LAYER parameter specifies at which layer a cell is located. This algorithm is applicable to complex networking scenarios. Figure 3-8 shows the cell layers. Figure 3-8 Cell layers
In Huawei multiband handover algorithm, a GSM network covering a certain area is divided into four layers, which are: Layer 4: Umbrella cell. The umbrella cells are generally GSM900 cells having the wide coverage feature. It also implements fast MS connection. Layer 3: Macro cell. The macro cells are generally GSM900 cells, which are commonly used in current GSM system and serve majority of subscribers. Layer 2: Micro cell. The micro cells are generally DCS1800 cells having the small coverage feature. They enable capacity expansion. Layer 1: Pico cell. The Pico cells are generally DCS1800 cells, which are used in hot spots and blind spots. The cell at the lower layer has a higher priority. PRIOR controls a handover between cells at the same layer. Each layer has 16 priorities, numbered 1-16 respectively. A high value indicates a low priority. If the cells at the same layer have different priorities, a cell with a smaller priority value has a higher priority. PRIOR along withCELLLAYER determines the priority of a cell. The priority affects the sequence of neighboring cells for handover. 3.4.12 Inter-Layer Handover
Inter-layer handover is a type of normal handover. It is used to enable the micro cells at low layers (the priority is high) to absorb traffic volume. The GSM network is divided into several layers to balance the traffic volume flexibly and to meet the requirements of different network topologies. For details, see section3.4.11 Fast-Moving Micro Cell Handover . In Huawei handover algorithm I, both inter-layer handovers and PBGT handovers are better cell handovers. The inter-layer handover is performed between different layers, whereas the PBGT handover is performed at the same layer.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
16/201
16/7/2015
Handover Feature Parameter Description
Trigger Conditions
If LEVHOEN is set to YES(Yes), the trigger conditions for an inter-layer handover are as follows: The layer at which the target cell is located has a higher priority than the layer at which the serving cell is located. Filtered downlink receive level of the target cell ≥ HOTHRES + INTELEVHOHYST – 64 After basic ranking and comprehensive ranking during network characteristics adjustment, the target cell has a higher priority than the serving cell. The inter-layer handover is triggered when the P/N criterion is met, that is, the previous conditions are met for LEVLAST withinLEVSTAT . If NCELLPUNEN is set toNO(No) for the target cell, an inter-layer handover is triggered when the previous conditions are met. If NCELLPUNEN is set to YES(Yes) for the target cell, the timer NCELLPUNTM is started when the previous conditions are met. After the timer is started, the value of NCELLPUNLEV is subtracted from the filtered receive level of the target cell. If the timer expires, an inter-layer handover is triggered. If the timer stops, no inter-layer handover is triggered. The timer stops in either of the following cases: If the filtered BCCH receive level of the target cell is less than the value of NCELLPUNSTPTH , the timer stops for the target cell. If the trigger conditions for a BQ handover are met, the timer for all handover candidate cells stops. Target Cell Selection
The requirements for target cell selection are as follows: The trigger conditions are met. The serving cell cannot be selected as the target cell. The target cell has the highest priority in the candidate cell list. Inter-Layer Handover Process
Figure 3-9 shows the inter-layer handover process. Figure 3-9 Inter-layer handover process
3.4.13 PBGT Handover
PBGT handover is a type of normal handover. Trigger Conditions
If PBGTHOEN is set to YES(Yes), the trigger conditions for a PBGT handover are as follows: The target cell and the serving cell are at the same layer and have the same priority. The following condition is met for PBGTLAST withinPBGTSTAT : (MIN (MS_TXPWR_MAX, P) – RXLEV_DL – PWR_DIFF) – (MIN (MS_TXPWR_MAX (n), P) – RXLEV_NCELL (n)) > PBGT_HO_MARGIN
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
17/201
16/7/2015
Handover Feature Parameter Description where RXLEV_DL: indicates the filtered downlink receive level of the serving cell. MS_TXPWR_MAX: indicates the maximum allowed transmit power of an MS in the serving cell. MS_TXPWR_MAX (n): indicates the maximum allowed transmit power of an MS in neighboring cell n. RxLev_NCELL (n): indicates the downlink receive level in neighboring cell n. PWR_DIFF: indicates the difference between the maximum downlink transmit power in the serving cell due to power control and the actual downlink transmit power in the serving cell. P: indicates the maximum transmit power of an MS. PBGT_HO_MARGIN: indicates the PBGTMARGIN of the serving cell configured for neighboring cells minus 64.
If NCELLPUNEN is set toNO(No) for the target cell, a PBGT handover is triggered when the previous conditions are met. If NCELLPUNEN is set to YES(Yes) for the target cell, the timer NCELLPUNTM is started when the previous conditions are met. After the timer is started, the value of NCELLPUNLEV is subtracted from the filtered receive level of the target cell. If the timer expires, a PBGT handover is triggered. If the timer stops, no PBGT handover is triggered. The timer stops in either of the following cases: If the filtered BCCH receive level of the target cell is less than the value of NCELLPUNSTPTH , the timer stops for the target cell. If the trigger conditions for a BQ handover are met, the timer for all handover candidate cells stops. Target Cell Selection
The target cell must meet the following conditions: The target cell and the serving cell are at the same layer and have the same priority. The serving cell cannot be selected as the target cell. The target cell has the highest priority in the candidate cell list. 3.4.14 AMR Handover This section describes the feature GBFD-115504 AMR FR/HR Dynamic Adjustment. The AMR handover in handover I algorithm consists of the AMR TCHF-TCHH handover and AMR TCHH-TCHF handover algorithm. The AMR TCHF-TCHH handover is conducted based on cell load and RQI, whereas the AMR TCHH-TCHF handover is conducted based on RQI. The conversion formula between RQI and C/I is RQI = 2 x C/I. The handover I algorithm also supports dynamic adjustment between TCHFs and TCHHs. For details, see section Handover Between a Full-Rate TCH and a Half-Rate TCH . This section describes the AMR handover in handover I algorithm. Trigger Conditions for an AMR TCHF-TCHH Handover
The trigger conditions for an AMR TCHF-TCHH handover are as follows: INTRACELLFHHOEN is set to YES(Yes).
The target call is an AMR call. The half-rate function must be enabled in the cell where the call is initiated. The full-rate speech version 3 and half-rate speech version 3 must be supported by the cell where the call is initiated. The type of channel specified by the MSC during a call can be changed during a handover. For AMR FR calls, if the parameter AMRTCHHPRIORALLOW is set toON(On), TCHF-to-TCHH handover is triggered when the cell load is greater than or equal to the value for the parameter AMRTCHHPRIORLOAD and the proportion of AMR HR users is less than the value for the parameter ALLOWAMRHALFRATEUSERPERC . For AMR FR calls, if the parameter AMRTCHHPRIORALLOW is set toOFF(Off), TCHF-to-TCHH handover is triggered when the proportion of AMR HR users is less than the value for the parameter ALLOWAMRHALFRATEUSERPERC . The call occupies the full-rate TCH, and the RQI/2 is greater than INHOF2HTH . For an AMR FR call, the AMR TCHF-TCHH handover can be performed if the preceding conditions are met for INFHHOLAST withinINFHHOSTAT . Trigger Conditions for an AMR TCHH-TCHF Handover
The trigger conditions for an AMR TCHH-TCHF handover are as follows: INTRACELLFHHOEN is set to YES(Yes).
The target call is an AMR call. The half-rate function must be enabled in the cell where the call is initiated. The full-rate speech version 3 and half-rate speech version 3 must be supported by the cell where the call is initiated. The type of channel specified by the MSC during a call can be changed during a handover. The call occupies the half-rate TCH, and the RQI/2 is less than INHOH2FTH . For an AMR HR call, the AMR TCHH-TCHF handover can be performed if the preceding conditions are met for INFHHOLAST withinINFHHOSTAT . NOTE:
If INTRACELLSINUSEREN is set to NO(No) , no intra-cell handover is allowed within the time specified by BANTIME when multiple intra-cell handovers are performed consecutively. If INTRACELLSINUSEREN is set to YES(Yes), no quality-related intra-cell handovers (such as BQ handover, interference handover, TCHH-to-TCHH handover, and tight BCCH handover) is allowed within the time specified by BANTIME when the same MS consecutively performs multiple such types of handovers. Target Cell Selection
The AMR handover is an intra-cell handover. Therefore, only the serving cell can be selected as the target cell. 3.4.15 SDCCH Handover
This section describes the feature GBFD-110608 SDCCH Handover. SDCCH handover is a process in which the MS is handed over from an SDCCH to another SDCCH in an immediate assignment. SDCCH handover helps improve the access success rate of the MSs on the edge of the network, improving the network QoS. The principle of SDCCH handover is the same as that of TCH handover. Regarding procedure, an SDCCH handover involves measurement and MR reporting, MR processing, handover decision, and handover execution. Whether an SDCCH handover can be performed is controlled by the SIGCHANHOEN parameter. If an inter-BSC SDCCH handover is required, both SIGCHANHOEN and INRBSCSDHOEN should be set to YES(Yes). The handover decision algorithm for SDCCH handover is different from that for TCH handover in the following ways: The algorithms for the following handovers support SDCCH handover:
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
18/201
16/7/2015
Handover Feature Parameter Description Quick handover, TA handover, BQ handover, rapid level drop handover, interference handover, no-DL-MR handover, Inter-layer handover, edge handover, and fastmoving micro cell handover The algorithms for the following handovers do not support SDCCH handover: Dual-band network handover, load handover, PBGT handover, AMR handover, better 3G cell handover, concentric cell handover, and tight BCCH handover
3.4.16 Other Handovers
Other handovers here refer to better 3G cell handover and tight BCCH handover. Better 3G Cell Handover
See Interoperability Between GSM and WCDMA Feature Parameter Description. Tight BCCH Handover
See BCCH Dense Frequency Multiplexing Feature Parameter Description. 3.5 Handover Decision Based on Handover Algorithm II
This section describes the feature GBFD-510501 HUAWEI II Handover. Handover decision based on handover algorithm II is made in the following order: forced handover, emergency handover, intra-cell handover, and inter-cell handover. Handover decision based on handover algorithm II involves the following procedures: Determines whether the serving cell meets the trigger conditions. Selects corresponding candidate cell list for each handover type. Performs the comprehensive decision and determining the candidate neighboring cells. The procedure for performing comprehensive decision based on handover results and determining the candidate neighboring cells is as follows: 1. The BSC selects a handover type with the highest priorit y from all the handovers that can be performed on each neighboring cell. The handover priority is as follows: Forced handover, emergency handover, and interference handover have a high priority. Figure 3-10 shows the details. Figure 3-10 Handovers with high priority
NOTE:
Quick handover is classified into frequency offset handover and fast move handover. Frequency offset handover has a higher priority than fast move handover. Intra-cell handover (excluding interference handover) and inter-cell handover have a normal priority. Figure 3-11 shows the details. NOTE:
AMR handover has the same priority as TCHF-TCHH handover. Figure 3-11 Handovers with normal priority
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
19/201
16/7/2015
Handover Feature Parameter Description
2. The BSC ranks the candidate cells acc ording to the network characteristics adjustment algorithm and then generates the final c andidate cell l ist. Every neighboring cell in the candidate cell list has its own handover decision. Neighboring GSM and UMTS cells are ranked separately. 3. In handover algorithm II, HOOPTSEL specifies whether a neighboring GSM or UMTS cell is preferred. When HOOPTSEL is set toPre_2G_Cell(Preference for 2G cell): A neighboring GSM cell is preferred. If the candidate cell list contains suitable neighboring UMTS cells but no suitable neighboring GSM cells, a neighboring UMTS cell is selected. When HOOPTSEL is set toPre_3G_Cell(Preference for 3G cell): A neighboring UMTS cell is preferred. If the candidate cell list contains suitable neighboring GSM cells but no suitable neighboring UMTS cells, a neighboring GSM cell is selected. When HOOPTSEL is set toPre_2G_CellThres(Preference 2G cell by thresh): If the receive level of a candidate 2G cell is less than or equal to HOPRETH2G , a neighboring UMTS cell is preferred. NOTE:
When a neighboring UMTS cell is preferred among the candidate cells, the priority of 3G better-cell handover is the lowest. If the trigger conditions for an emergency handover are met and there is at least one candidate cell, the emergency handover timer NEWURGHOMININTV is started. Another emergency handover decision can be performed only when NEWURGHOMININTV times out. 3.5.1 Quick Hando ver
This section describes the features GBFD-510103 Chain Cell Handover and GBFD-510102 Fast Move Handover. Quick handover aims to increase the handover success rate of an MS moving at a high speed and to ensure the call continuity and low call drop rate. Quick handover applies to the scenario where an MS moves fast along an urban backbone road, a selected route, or a high-speed railroad. Quick Handover Types
Quick handover consists of frequency offset handover and fast move handover. Frequency offset handover Whether the MS moves away from the serving cell is determined based on the frequency offset information provided by an MS moving at a high speed. Frequency offset handover decision is made according to the uplink/downlink receive level of the serving cell and the path loss of neighboring cells. Fast move handover Fast move handover decision is made according to the path loss of neighboring cells. For quick handover, the handover response speed is enhanced by: Accurately calculating the move speed of the MS Lifting the restriction on the interval between handover decisions Reducing the number of MRs for the handover decision Introducing the alpha filtering Quick Handover Preparation
The preparation for quick handover involves the following aspects: Frequency offset is decoded from the MR. Frequency offset of the MS is obtained from the uplink MR that the BTS sends to the BSC. Alpha filtering is performed on the MR. Trigger Conditions
During the handover decision, it is first determined whether the trigger conditions for a frequency offset handover are met. When the BTS cannot send the frequency offset information or the reported frequency offset information is invalid, a fast move handover is triggered, provided that other conditions for a frequency offset handover are met. If QUICKHOEN is set to YES(Yes), the trigger conditions for a quick handover are as follows: The MS moves away from the serving cell (the frequency offset in the measurement result is a negative value) and the move speed of the MS is greater than MOVESPEEDTHRES . The filtered uplink level of the serving cell is less than HOUPTRIGE . The compensated downlink level of the serving cell is less than HODOWNTRIGE . The difference between the path loss of a chain neighboring cell and that of the serving cell is greater than the predefined threshold. The threshold is equal to the value of HOOFFSET (in theSET GCELLHOFAST command for an internal neighboring cell or in theMOD GEXT2GCELL command for an external neighboring cell)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
20/201
16/7/2015
Handover Feature Parameter Description plus the value of ADJHOOFFSET for the serving cell.
The trigger conditions for a quick handover are as follows: If all the last three conditions are met, the handover decision is made as follows: If the first condition is met, a frequency offset handover is triggered. If QUICKPBGTHOEN is set to YES(Yes) and the first condition is not met, a fast move handover is triggered. If QUICKPBGTHOEN is set to NO(No), a fast move handover is not triggered. If all the last three conditions are not met, a quick handover is not triggered. Target Cell Selection
The target cell must be a chain neighboring cell of the serving cell. The target cell can be obtained through the setting of ISCHAINNCELL. If HODIRFORECASTEN is set to
YES(Yes), a neighboring cell in the moving direction of the MS is selected preferentially.
To forecast the moving direction of the MS, the direction of a chain neighboring cell (A or B) compared with the serving cell is specified by CHAINNCELLTYPE . If the number of times that the MS is handed over to neighboring cells in the same direction (B for example) is greater than or equal to HODIRLASTTIME when the handover time reaches HODIRSTATIME , the MS is inferred to be moving towards the B direction. Subsequently, the MS is preferentially handed over to the neighboring cell whose CHAINNCELLTYPE is B. Limitations
The limitations on quick handover are as follows: The serving cell cannot be selected as the target cell. The candidate cells for quick handover must be chain neighboring cells of the serving cell. After a quick handover is successf ul, the penalty is performed on the original cell during the penalty time to prevent an immediate handover back to the original cell. The penalty time and penalty value are specified by TIMEPUNISH andHOPUNISHVALUE respectively. 3.5.2 TA Handover
TA handover is a type of emergency handover. The TA handover decision is made according to the TA value reported by the MS. The TA value of a normal cell ranges from 0 to 63 and that of an extended cell ranges from 0 to 229. The TA can be stepped up or down in steps of 553.5 m. The TA value of 63 corresponds to a distance of 35 km. Trigger Conditions
TA handover is triggered when the following conditions are met: TAHOEN is set to YES(Yes).
Filtered TA value in the MR provided by the MS is greater than or equal to TALIMIT . The TA handover can be triggered only when the preceding two conditions are met simultaneously. NOTE:
From the perspective of the trigger conditions for a TA handover, TA can be regarded as a limitation to the size of a cell. Target Cell Selection
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions: The serving cell cannot be selected as the target cell. If TALIMIT of a co-site neighboring cell is less than or equal to theTALIMIT of the serving cell, a handover to the neighboring cell is prohibited. In handover algorithm II, a cell becomes the target cell for TA handover if the previous conditions are met for TALASTTIME withinTASTATTIME . If the trigger conditions for a TA handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. Limitations
After the TA handover is successf ul, the penalty is performed on the original cell. During TIMETAPUNISH , SSTAPUNISH is subtracted from the level of the original cell to prevent an immediate handover back to the original cell. 3.5.3 BQ Handover
BQ handover is a type of emergency handover in which the system makes the decision based on the uplink/downlink receive quality on the Um interface. Receive quality is represented by BER. The BSC measures the quality of a radio link based on the quality band in the MR. The probable cause of an increase in BER is that the signal power is too low or the channel interference increases. Trigger Conditions
If BQHOEN is set to YES(Yes), the trigger conditions for a BQ handover are as follows: The uplink receive quality is greater than or equal to the uplink receive quality threshold of the serving cell. The downlink receive quality is greater than or equal to the downlink receive quality threshold of the serving cell. The BQ handover is triggered when either of the preceding conditions is met. The parameters for specifying the uplink and downlink receive quality thresholds are as follows: For non-AMR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMIT and the parameter for specifying the downlink receive quality threshold is DLQUALIMIT . For AMR FR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMITAMRFR and the parameter for specifying the downlink receive quality threshold is DLQUALIMITAMRFR . For AMR HR calls, the parameter for specifying the uplink receive quality threshold is ULQUALIMITAMRHR and the parameter for specifying the downlink receive quality threshold is DLQUALIMITAMRHR . Target Cell Selection
The target cell must have the highest priority in the candidate cell list after handover preprocessing. In addition, the target cell must meet the following conditions: In handover algorithm II, the serving cell cannot be selected as the target cell. The receive level of target cell must meet the following conditions:
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
21/201
16/7/2015
Handover Feature Parameter Description The serving cell and the target cell work in the same frequency band. Filtered downlink receive level of the target cell > Filtered downlink receive level of the serving cell after compensation + (INTERCELLHYST of the serving cell configured for the neighboring cell – 64) – (BQMARGIN – 64) The serving cell works in GSM900 and the target cell works in DCS1800. Filtered downlink receive level of the target cell ≥ HOTHRES + (LEVHOHYST – 64). The serving cell works in DCS1800 and the target cell works in GSM900. There is no constraint on the target cell in this condition. In handover algorithm II, a cell becomes the target cell for BQ handover if the previous conditions are met for BQLASTTIME withinBQSTATTIME .
If the trigger conditions for a BQ handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of emergency handover is made. NOTE:
If INTRACELLSINUSEREN is set to NO(No) , no intra-cell handover is allowed within the time specified by BANTIME when multiple intra-cell handovers are performed consecutively. If INTRACELLSINUSEREN is set to YES(Yes), no quality-related intra-cell handovers (such as BQ handover, interference handover, TCHH-to-TCHH handover, and tight BCCH handover) is allowed within the time specified by BANTIME when the same MS consecutively performs multiple such types of handovers. Limitations
After the BQ handover is successful, the penalty is performed on the original cell. During TIMEBQPUNISH , SSBQPUNISH is subtracted from the level of the original cell to prevent an immediate handover back to the original cell. 3.5.4 Interference Handover
Interference handover is a type of intra-cell handover in handover algorithm II. Interference handover helps protect calls affected by interference and reduce network interference. It is applicable in scenarios with interference. In handover algorithm II, the BQ handover is a type of emergency handover and the interference handover is a type of intra-cell handover. Trigger Conditions
If INTRACELLHOEN is set to YES(Yes) andINTERFHOEN is set to YES(Yes), the trigger conditions for an interference handover are as follows: The filtered value of uplink receive quality is greater than or equal to the specified receive quality threshold at the current uplink receive level. The filtered value of downlink receive quality is greater than or equal to the specified receive quality threshold at the current downlink receive level. In handover algorithm II, the interference handover is triggered when the previous conditions are met for INTERFERELASTTIME withinINTERFERESTATTIME . The parameters for specifying the uplink and downlink receive quality thresholds are as follows: For non-AMR FR calls, the parameter for specifying the receive quality threshold is RXQUALn, where 1 ≤ n ≤ 12. If 2 ≤ n ≤ 12, the receive quality threshold is equal to the sum of RXQUALn, FHGAINOFFSET , and quality offset. For AMR FR calls, the parameters for specifying the receive quality threshold are RXQUALn (1 ≤ n ≤ 12) andRXLEVOFF . If n = 1, the receive quality threshold is RXQUAL1. If 2 ≤ n ≤ 12, the receive quality threshold is the sum of RXQUALn, RXLEVOFF , and quality offset. Target Cell Selection
In handover algorithm II, only the serving cell can be selected as the target cell. Limitations
If INTRACELLSINUSEREN is set to NO(No) and multiple consecutive intra-cell handovers are performed, the BSC forbids any intra-cell handovers within the duration specified by BANTIME . If INTRACELLSINUSEREN is set to YES(Yes) and an MS performs multiple quality-based intra-cell handovers (such as BQ handover, interference handover, TCHH-to-TCHF handover, and tight BCCH handover), the BSC forbids the MS to perform any quality-based intra-cell handovers within the duration specified by BANTIME . 3.5.5 Handover Due to No Downlink Measurement Report
Handover due to no downlink measurement report is performed on the basis of the uplink quality. The purpose is to ensure the call continuity and minimize the possibility of call drops. Handover due to no downlink measurement report is generally caused by adverse radio environment on the uplink. In this case, the requirements of the filtering algorithm cannot be met, so other handover decisions cannot be performed. Trigger Conditions
In handover algorithm II, the trigger conditions for a no-DL-MR handover are as follows: NODLMRHOEN is set to YES(Yes).
There is no downlink information in the MR of the call. The number of lost downlink MRs is less than NODLMRHOALLOWLIMIT . For TCH, the number of saved MRs with uplink quality value is greater than DATAQUAFLTLEN ; for SDCCH, the number of saved MRs with uplink quality value is greater than QLENSI . The filtered value of uplink receive quality is greater than or equal to ULQUALIMIT . For AMR FR calls, the corresponding parameter is ULQUALIMITAMRFR . For AMR HR calls, the corresponding parameter is ULQUALIMITAMRHR . In addition, the BSC triggers a no-DL-MR handover when MRs of the serving cell keep lost for NODLMRHOLASTTIME withinNODLMRHOSTATTIME . Target Cell Selection
In handover algorithm II, the conditions for selecting the target cell are as follows: The ranked neighboring cells recorded in the last complete MR are saved as candidate cells. Only a neighboring cell can serve as the target cell. Receive level in neighboring cell > Filtered receive level in serving cell + (INTERCELLHYST – 64) – (BQMARGIN – 64) A neighboring cell serves as the target cell if the previous conditions are met for ULBQLASTTIME withinULBQSTATTIME .
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
22/201
16/7/2015
Handover Feature Parameter Description
3.5.6 Enhanced Dual-Band Network Handover
Enhanced dual-band network handover is performed based on the traffic volume of the OL and UL cells and based on the receive level. Enhanced dual-band network handover is classified into the following types: Handover due to high load in the UL cell Handover due to low load in the UL cell Handover due to MS movement to the border of the OL cell Trigger Conditions for a Handover Due to High Load in the Underlaid Cell
The trigger conditions for a handover due to high load in the underlaid subcell are as follows: The two cells are in the enhanced dual-band network and OUTLOADHOENABLE is set to YES(Yes). The MS supports the frequency band on which the overlaid subcell operates. The handover due to high load in the underlaid subcell is performed only on TCHs. The load in the underlaid subcell is greater than or equal to OUTGENOVERLDTHRED. The load in the overlaid subcell is less than INNSERIOVERLDTHRED . The system traffic volume is less than or equal to EDBSYSFLOWLEV . The current call is within the handover margin, and the receive level in the overlaid subcell or that in the underlaid subcell is greater than or equal to INTOINNREXLEVTHRED . The receive level in the underlaid subcell minus the receive level of the optimal neighboring cell is greater than the sum of ATCBTHRED and ATCBHYST . When all the preceding conditions are met, the handover due to high load in the underlaid subcell is triggered. If the load of the UL subcell in the cell is greater than or equal to OUTSERIOVERLDTHRED, the handover margin is adjusted in a period of OUTLOADHOPERIOD subtracted by OUTLOADHOMODPERI . The step length for handover margin adjustment is specified by OUTLOADHOSTEP . Trigger Conditions for a Handover Due to Low Load in the Underlaid Cell
The trigger conditions for a handover due to low load in the underlaid subcell are as follows: The load in the underlaid subcell is smaller than OUTLOWLOADTHRED. The system traffic volume is less than or equal to EDBSYSFLOWLEV . The current call is within the handover margin and the receive level in the overlaid subcell is greater than or equal to OUTINNREXLEVTHRED . When all the preceding conditions are met, the handover due to low load in the underlaid subcell is triggered. If the load of the UL subcell in the cell is less than OUTLOWLOADTHRED for a specified period, the handover margin is adjusted in a period of INNLOADHOPERI . The step length for handover margin adjustment is specified by INNLOADHOSTEP . Trigger Conditions for a Handover Due To MS Movement in the Overlaid Subcell
The trigger conditions for the handover due to MS movement in the OL subcell are described as follows: SS(s) < Thdouter SS(u) – SS(n) < ATCB_THRD – ATCB_HYST where, SS(s): specifies the filtering compensated downlink receive level in the serving cell. Thdouter: specifies OUTINNREXLEVTHRED . SS(u): specifies the downlink level (power compensation is performed on the downlink level based on the measurement) of the UL subcell where the call is originated. If the SS(u) value cannot be obtained, the decision of enhanced dual-band network handover is not performed and the decision condition is met by default. SS(n): The best neighboring cell is the one whose measured BCCH level is the highest among neighboring cells. SS(n) is the level value of such an optimum neighboring cell that is on the same frequency band, layer, and level with the UL subcell but is not co-sited with the UL subcell. If such a neighboring cell is not available, the value of SS(n) is –110 dBm. ATCB_THRD: specifies ATCBTHRED . ATCB_HYST: specifies ATCBHYST . Handover due to MS movement in the OL subcell is triggered if either of the preceding conditions is met. NOTE:
For the ATCB handover algorithm, the boundaries of the OL and UL subcells are determined according to the relative value between the signal strength of serving cell and that of neighboring cell. When SS(s) is equal to SS(n), the system considers that it is the boundary point of the UL subcell. When the value of SS(s) subtracted by SS(n) is greater than ATCB_THRD, it is the coverage area of the OL subcell. The coverage area of the OL subcell is determined according to different networking and coverage conditions of the existing network. In addition, the OL subcell of the serving cell and the OL subcell of the neighboring cells will not overlap regardless of the distance between BTSs. The handover margin specifies the range of signal level. In the case of OL/UL load handover on the enhanced dual-band network, the MSs whose downlink levels are within the handover margin are handed over level by level. Target Cell Selection
The requirements for target cell selection in the enhanced dual-band network are as follows: For the handover due to high load in the UL cell, the MS must be handed over to the OL cell. For the handover due to low load in the UL cell, the MS must be handed over to the UL cell. For the handover due to MS movement in the OL subcell, the MS must be handed over to the UL cell. Limitations
The limitations on the handover due to high load in the UL cell are as follows: If the cell where the call is located is on an enhanced dual-band network, CELLINEXTP is set to Extra(Extra). The OUTLOADHOENABLE parameter should be set. The maximum range of the handover margin is from 63 to INTOINNREXLEVTHRED . The MS with the highest receive level is handed over first. The limitations on the handover due to low load in the UL cell are as follows: If the cell where the call is located is on the enhanced dual-band network, CELLINEXTP is set to Inner(Inner). The INNLOADHOEN parameter should be set. The maximum range of the handover margin is from 63 to OUTINNREXLEVTHRED . The MS with the lowest receive level is handed over first.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
23/201
16/7/2015
Handover Feature Parameter Description
The limitations on the handover due to MS movement in the OL subcell are described as follows: The cell where the call is located is on the enhanced dual-band network. CELLINEXTP is set to Inner(Inner). Impact of the Enhanced Dual-Band Network Handover on the Existing Algorithm
The impact of the enhanced dual-band network handover on the existing algorithm is as follows: On the enhanced dual-band network, the MS should not be handed over to a cell in the same UL/OL cell group when the load handovers between the OL cell and the UL cell (specified by OUTLOADHOENABLE andINNLOADHOEN ) are allowed. This is to prevent a load handover of a normal cell from colliding with a load handover between the OL cell and the UL cell on the network. 3.5.7 Load Handover
In handover algorithm II, load handover is not decided independently. In handover algorithm II, the load handover decision is made in network adjustment phase. The selection of target cell should be processed by the better-cell handover. That is, the load handover is triggered when the trigger conditions for a load handover and better-cell handover are met simultaneously. For the trigger conditions for a load handover, see section 3.4.8 Load Handover . For the trigger conditions for a better-cell handover, see section 3.5.10 Better-Cell Handover . The ranges of load handover margins are defined as follows: Load handover margin 1 specifies the area where the neighboring cell receive level minus the downlink receive level of the serving cell ranges from (INTERCELLHYST – 64 – LOADHOSTEP ) to (INTERCELLHYST – 64). Load handover margin 2 specifies the area where the neighboring cell receive level minus the downlink receive level of the serving cell ranges from (INTERCELLHYST – 64 – LOADHOSTEP x 2) to (INTERCELLHYST – 64). If LoadHoEn is set to YES(Yes) and LoadHoPunishInheritSwitch is set toON(On), load handover supports handover penalty inheritance. 3.5.8 Edge Handover
Edge handover is performed on the basis of receive level. To trigger an edge handover, the receive level of the target cell should be at least one hysteresis value (specified by INTERCELLHYST – 64) greater than the receive level of the serving cell. Trigger Conditions
If FRINGEHOEN is set to YES(Yes), the trigger conditions for an edge handover are as follows: Either of the following conditions is met: Filtered downlink receive level of the serving cell after compensation < DLEDGETHRES Filtered uplink receive level of the serving cell after compensation < ULEDGETHRES Receive level of a neighboring cell > Filtered downlink receive level of the serving cell after power control compensation + ( INTERCELLHYST – 64) An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are met for EDGELAST withinEDGESTAT . If both FRINGEHOEN and EDOUTHOADEN are set to YES(Yes), the trigger conditions for an edge handover are as follows: Either of the following conditions is met: Filtered downlink receive level of the serving cell after compensation < DLEDGETHRES + (EDOUTHOOFFSET – 64) Filtered uplink receive level of the serving cell after compensation < ULEDGETHRES + (EDOUTHOOFFSET – 64) Receive level of a neighboring cell > Filtered downlink receive level of the serving cell after power control compensation + ( INTERCELLHYST – 64) An edge handover is triggered when the P/N criterion is met, that is, when the previous conditions are met for EDGELAST1 within EDGESTAT1. NOTE:
If FRINGEHOEN is set to NO(No), EDOUTHOADEN andEDOUTHOOFFSET are invalid. Figure 3-12 shows an edge handover. Figure 3-12 Edge handover
Target Cell Selection
The target cell must have the highest priority in the candidate cell list. In addition, it must meet the following conditions: The serving cell cannot be selected as the target cell. After cells are ranked, the target cell must have a higher priority than the serving cell. A cell becomes the target cell if the previous conditions are met for EDGEADJLASTTIME withinEDGEADJSTATTIME . If the trigger conditions for an edge handover are met but the candidate 2G cells are not suitable, the following operations are performed: If a neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to YES(Yes), and if the MS supports the GSM/UMTS inter-RAT handover, the GSM/UMTS inter-RAT handover is performed. If no neighboring UMTS cell is available, if INTERRATOUTBSCHOEN is set to NO(No), or if the MS does not support the GSM/UMTS inter-RAT handover, the decision on whether to initiate another type of handover is made. 3.5.9 Fast-Moving Micro Cell Handover
Fast-moving micro cell handover is performed from a micro cell to a macro cell according to the relative speed of an MS so that the number of handovers can be minimized. Fast-moving micro cell handover applies to the following scenarios: If an MS is moving fast in a micro cell, it is handed over to a macro cell. To prevent an MS that is moving fast in a macro cell from entering a micro cell, time penalty is performed on the micro cell so that the fast-moving MS camps on the macro cell. Figure 3-13 shows a fast-moving micro cell handover.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
24/201
16/7/2015
Handover Feature Parameter Description
Figure 3-13 Fast-moving micro cell handover
Trigger Conditions
If QCKMVHOEN is set to YES(Yes), the handover decision procedure of fast-moving micro cell handover is as follows: When the trigger conditions for an edge handover or PBGT handover are met, the fast-moving micro cell handover decision is started. When the period during which the MS camps on the serving cell is shorter than QCKTIMETH , the number of cells through which the fast-moving MS passes is incremented by one. NOTE:
The cells counted by the system must locate at a layer lower than layer 4. In other words, they must be non-Umbrella cells. When the number of cells that the MS passes in fast movement reaches QCKSTATCNT , the fast-moving micro cell handover is triggered if the number of cells that the MS passes in fast movement counted by the system is greater than or equal to QCKTRUECNT . Target Cell Selection
In handover algorithm II, the target cell must have the highest priority in the candidate cell list. In addition, the target cell must meet the following conditions: The target cell must be at layer 4, that is, Umbrella cell. Filtered receive level of the target cell ≥ HOTHRES + INTELEVHOHYST – 64 A neighboring cell serves as the target cell if the previous conditions are met for HCSLASTTIME withinHCSSTATTIME . Limitations
After the fast-moving micro cell handover is successf ul, the penalty is performed on all the neighboring micro cells. DuringSPEEDPUNISHT , SDPUNVAL is subtracted from the receive level of every neighboring micro cell. Cell Layer and Cell Priority
With Huawei multiband handover algorithm, a proper traffic volume distribution can be realized among multiple frequency bands. Huawei multiband handover algorithm divides cells into four layers, with 16 priorities at each layer. The LAYER parameter specifies at which layer a cell is located. This algorithm is applicable to complex networking scenarios. Figure 3-14 shows the cell layers. Figure 3-14 Cell layers
In Huawei multiband handover algorithm, a GSM network covering a certain area is divided into four layers, which are: Layer 4: Umbrella cell. The umbrella cells are generally GSM900 cells having the wide coverage feature. It also implements fast MS connection. Layer 3: Macro cell. The macro cells are generally GSM900 cells, which are commonly used in current GSM system and serve majority of subscribers. Layer 2: Micro cell. The micro cells are generally DCS1800 cells having the small coverage feature. They enable capacity expansion. Layer 1: Pico cell. The Pico cells are generally DCS1800 cells, which are used in hot spots and blind spots. The cell at the lower layer has a higher priority. PRIOR controls a handover between cells at the same layer. Each layer has 16 priorities, numbered 1-16 respectively. A high value indicates a low priority. If the cells at the same layer have different priorities, a cell with a smaller priority value has a higher priority. PRIOR along withCELLLAYER determines the priority of a cell. The priority affects the sequence of neighboring cells for handover. 3.5.10 Better-Cell Handover
Better-cell handover is an optimization of inter-layer handover and PBGT handover in handover algorithm I. Better-cell handover is specific to handover algorithm II. Trigger Conditions
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
25/201
16/7/2015
Handover Feature Parameter Description
If BETTERCELLHOEN is set to YES(Yes), the trigger conditions for a better-cell handover are as follows: If PATHLOSSHOEN is set to YES(Yes), path loss is taken into consideration during the sorting of the serving cell and handover candidate cells. If PATHLOSSHOEN is set to NO(No), path loss is not taken into consideration during the sorting of the serving cell and handover candidate cells. If the serving cell is in the candidate cell list, the priorities of the handover candidate cells must be higher than the priority of the serving cell after the sorting. If the serving cell is not in the candidate cell list, the handover candidate cells must meet the following conditions: LoadHoEn is set toNO(No), or LoadHoEn is set to YES(Yes) but the load in the serving cell is less than TRIGTHRES .
If the serving cell and the handover candidate cells are at the same layer and have the same priority, the following conditions must be met: SS_DL(N) – SS_DL(S) > H – 64 SS_DL(N) indicates the filtered BCCH receive level of a target cell. SS_DL(S) indicates the compensated receive level on the downlink TCH after filtration. H indicates INTERCELLHYST of the serving cell over the neighboring cell. Negative handover is a type of better-cell handover. When INTERCELLHYST is set to a value less than 64, the value of H – 64 is negative. In this case, even if the downlink receive level in a candidate cell is less than the downlink receive level in the serving cell, a negative handover to the candidate cell can be performed. If the serving cell and the handover candidate cells are at different layers but have the same priority, the following conditions must be met: SS_DL(N) ≥ T_layer(N) + H_layer(S) - 64 SS_DL(N) indicates the filtered BCCH receive level of a target cell. T_layer(N) indicates HOTHRES of the target cell. H_layer(S) indicates INTELEVHOHYST of the serving cell. If LoadHoEn is set to YES(Yes) and the load in the serving cell is greater than TRIGTHRES , better-cell handover can be triggered. A neighboring cell becomes a target cell if the preceding conditions are met for BETTERCELLLASTTIME duringBETTERCELLLASTTIME . If both EDOUTHOADEN andNCELLPUNEN are set toNO(No) for the target cell, a better-cell handover is triggered when the previous conditions are met. If EDOUTHOADEN is set to YES(Yes) for the target cell, a better-cell handover is triggered when the previous conditions and the following condition are met: Filtered downlink receive level of the serving cell after power control compensation ≥ HOTHRES – (LEVHOHYST + EDOUTHOOFFSET – 64) If NCELLPUNEN is set to YES(Yes) for the target cell, the timer NCELLPUNTM is started. After the timer is started, the value of NCELLPUNLEV is subtracted from the filtered receive level of the target cell. If the timer expires, a better-cell handover is triggered. If the timer stops, no better-cell handover is triggered. The timer stops when the filtered BCCH receive level of the target cell is less than the value of NCELLPUNSTPTH . Target Cell Selection
The requirements for target cell selection are as follows: The serving cell cannot be selected as the target cell. The target cell has the highest priority in the candidate cell list. 3.5.11 SDCCH Handover
This section describes the GBFD-110608 SDCCH Handover feature. SDCCH handover is a process in which the MS is handed over from an SDCCH to another SDCCH in an immediate assignment. SDCCH handover helps improve the access success rate of the MSs on the edge of the network, improving the network QoS. The principle of SDCCH handover is the same as that of TCH handover. Regarding procedure, an SDCCH handover involves measurement and MR reporting, MR processing, handover decision, and handover execution. Whether an SDCCH handover can be performed is controlled by the SIGCHANHOEN parameter. If an inter-BSC SDCCH handover is required, both SIGCHANHOEN and INRBSCSDHOEN should be set to YES(Yes). The handover decision algorithm for SDCCH handover is different from that for TCH handover in the following ways: The following handover algorithms support SDCCH handover: Quick handover, TA handover, BQ handover, interference handover, no-DL-MR handover, edge handover, and fast-moving micro cell handover The following handover algorithms do not support SDCCH handover: Enhanced dual-band network handover, load handover, better-cell handover, handover between a full-rate TCH and a half-rate TCH, better 3G cell handover, concentric cell handover, and tight BCCH handover 3.5.12 Other Handovers
Other handovers here refer to better 3G cell handover and tight BCCH handover. Better 3G Cell Handover
See Interoperability Between GSM and WCDMA Feature Parameter Description. Tight BCCH Handover
See BCCH Dense Frequency Multiplexing Feature Parameter Description.
4 Related Features Table 4-1 Related features Feature
Prerequisite Feature
Mutually Exclusive Feature
Affected Feature
GBFD-110601 HUAWEI I Handover
GBFD-110801 Processing of Measurement Report or GBFD-110802 Pre-processing of Measurement Report
GBFD-510501 HUAWEI II Handover
None
GBFD-510501 HUAWEI II Handover
GBFD-110801 Processing of Measurement Report or GBFD-110802 Pre-processing of Measurement Report
GBFD-110601 HUAWEI I Handover
None
GBFD-110607 Direct Retry
GBFD-110601 HUAWEI I Handover or None GBFD-510501 HUAWEI II Handover
GBFD-111005 Enhanced Channel Assignment Algorithm NOTE: If channel allocation fails, directed retry can be triggered using a forced handover. This increases the assignment success rate
GBFD-110608 SDCCH Handover
GBFD-110601 HUAWEI I Handover or GBFD-510501 HUAWEI II Handover The following handover algorithms support SDCCH handover: Quick handover, TA handover, BQ handover, interference
The following handover algorithms do not None support SDCCH handover: Enhanced dual-band network handover, load handover, better-cell handover, handover between a full-rate TCH and a half-rate TCH, better 3G cell handover, concentric
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
26/201
16/7/2015
Handover Feature Parameter Description handover, no-DL-MR handover, edge handover, and fast-moving micro cell handover
cell handover, and tight BCCH handover
GBFD-110801 Processing of Measurement Report
None
GBFD-110802 Pre-processing of Measurement Report
GBFD-110802 Pre-processing of Measurement Report
None
GBFD-110801 Processing of Measurement Report
None None
GBFD-510102 Fast Move Handover
GBFD-110601 HUAWEI I Handover or GBFD-510501 HUAWEI II Handover GBFD-510103 Chain Cell Handover
None
None
GBFD-510103 Chain Cell Handover
GBFD-110601 HUAWEI I Handover or GBFD-510501 HUAWEI II Handover GBFD-510102 Fast Move Handover
None
None
GBFD-117101 BTS power lift for handover GBFD-110601 HUAWEI I Handover or GBFD-510501 HUAWEI II Handover
None
None
GBFD-115504 AMR FR/HR Dynamic Adjustment
None
None
GBFD-110601 HUAWEI I Handover or GBFD-510501 HUAWEI II Handover GBFD-115502 AMR HR
NOTE:
The following handover algorithms do not have feature IDs: quick handover, TA handover, BQ handover, interference handover, no-DL-MR handover, edge handover, and fastmoving micro cell handover, enhanced dual-band network handover, load handover, better-cell handover, handover between a full-rate TCH and a half-rate TCH, better 3G cell handover, concentric cell handover, and tight BCCH handover.
5 Impact on the Network 5.1 HUAWEI I Handover and HUAWEI II Handover Impact on System Capacity
None Impact on Network Performance
Either the HUAWEI I Handover feature or the HUAWEI II Handover feature must be enabled to increase the handover success rate. 5.2 Direct Retry Impact on System Capacity
With the Direct Retry feature, a heavy-traffic cell can share its traffic with neighboring cells. Impact on Network Performance
This feature improves the immediate assignment success rate and assignment success rate, but increases the number of handovers in heavy-traffic areas. 5.3 SDCCH Handover Impact on System Capacity
The SDCCH Handover feature increases the CPU load because the BSC needs to process SDCCH measurement reports and make handover decisions. Impact on Network Performance
This feature reduces the SDCCH call drop rate and enhances Um-interface security, but increases the number of handovers. 5.4 Processing of Measurement Report Impact on System Capacity
None Impact on Network Performance
None 5.5 Pre-processing o f Measurement Report Impact on System Capacity
None Impact on Network Performance
None 5.6 Fast Move Handover Impact on System Capacity
None Impact on Network Performance
The Fast Move Handover feature enables the BSC to hand over calls to a better cell based on the path loss, increasing the handover success rate and decreasing the call drop rate. 5.7 Chain Cell Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
27/201
16/7/2015
Handover Feature Parameter Description
Impact on System Capacity
None Impact on Network Performance
When a fast-moving MS travels in chain cells along an urban backbone road, expressway, or high-speed railway, the Chain Cell Handover feature increases the handover success rate, improves voice quality, and decreases the call drop rate. 5.8 BTS power lift for handover Impact on System Capacity
None Impact on Network Performance
The BTS power lift for handover feature increases the handover success rate and decreases the call drop rate in areas with poor signal coverage. This feature increases the probability that the BTS transmits signals with full power. The larger the probability that the BTS transmits signals with full power, the stronger the cochannel or adjacent channel interference to other cells, and the greater the fluctuation of the downlink HQI. 5.9 AMR FR/HR Dynamic Adjustment Impact on System Capacity
The AMR FR/HR Dynamic Adjustment feature enables automatic TCHF-to-TCHH handovers when traffic is heavy, improving system capacity. Impact on Network Performance
The AMR FR/HR Dynamic Adjustment feature enables automatic TCHF-to-TCHH handovers when traffic is heavy. This increases the number of handovers, deteriorates voice quality, but improves system capacity. The AMR FR/HR Dynamic Adjustment feature enables automatic TCHH-to-TCHF handovers when traffic is light. This increases the number of handovers but improves voice quality.
6 Engineering Guidelines 6.1 When to Use Handover 6.1.1 HUAWEI I Handover
It is recommended that the HUAWEI I Handover feature be used. 6.1.2 HUAWEI II Handover
It is recommended that the HUAWEI II Handover feature be used in a single-band and dual-band hybrid network. 6.1.3 Direct Retry
It is recommended that the Direct Retry feature be used in cells where the assignment success rate is low due to high load. 6.1.4 SDCCH Handover
It is recommended that the SDCCH Handover feature be used only in networks where authentication is enabled. When authentication is enabled on a network, SDCCH immediate assignment takes an extensive amount of time. This increases the probability of handovers due to MS mobility and a high interception risk over the Um interface. 6.1.5 Processing of Measurement Report
Either the Processing of Measurement Report feature or the Pre-processing of Measurement Report feature must be enabled. The Processing of Measurement Report feature is recommended. 6.1.6 Pre-processing of Measurement Report
It is recommended that the Pre-processing of Measurement Report feature be used when the BSC load is high. 6.1.7 Fast Move Handover
It is recommended that the Fast Move Handover feature be used in chain cells along high-speed railways or expressways. 6.1.8 Chain Cell Handover
It is recommended that the Chain Cell Handover feature be used in chain cells along high-speed railways or expressways. 6.1.9 BTS power lift for handover
It is recommended that the BTS power lift for handover feature be used in scenarios where the handover success rate is low due to coverage problems. 6.1.10 AMR FR/HR Dynamic Adjustment
It is recommended that the AMR FR/HR Dynamic Adjustment feature be used in scenarios where traffic is heavy and the proportion of half-rate services is high. 6.2 Information to Be Collected 6.2.1 HUAWEI I Handover
None 6.2.2 HUAWEI II Handover Before deploying the HUAWEI II Handover feature, collect the frequency planning information about the cell. 6.2.3 Direct Retry
Before deploying the Direct Retry feature, collect the following information: Assignment success rate in the cell Proportion of assignment failures due to lack of channels Traffic volume in the cell Mean Duration of Busy State for Channels (TCH) 6.2.4 SDCCH Handover
Before deploying the SDCCH Handover feature, collect information about whether authentication is enabled on the network from the CN. 6.2.5 Processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
28/201
16/7/2015
Handover Feature Parameter Description
None 6.2.6 Pre-processing of Measurement Report
Before deploying the Pre-processing of Measurement Report feature, collect the CPU usage of BSC boards. If the overall CPU load on the BSC is high and more functions or capacity expansion is required, enable this feature so that the BTS preprocesses measurement reports. 6.2.7 Fast Move Handover Before deploying the Fast Move Handover feature, collect information about the environment within the cell. 6.2.8 Chain Cell Handover
Before deploying the Chain Cell Handover feature, collect information about the environment within the cell. 6.2.9 BTS power lift for handover
Before deploying the BTS power lift for handover feature, collect the following information: Handover success rate in the cell Number of handover failures due to weak uplink or downlink signal strength Signal quality in the cell 6.2.10 AMR FR/HR Dynamic Adjustment
Before deploying the AMR FR/HR Dynamic Adjustment feature, collect the traffic volume and the proportion of half-rate services in the cell. 6.3 Network Planning
None 6.4 Deploying HUAWEI I Handover 6.4.1 Deployment Requirements Table 6-1 Deployment requirements
Aspect
Requirement
Related feat ures
See c hapt er 4 Related Features.
BSC
None
BTS
None
GSM networking
None
MS
None
MSC
None
License
None
Others
None
6.4.2 Precautions
After a quick handover, BQ handover, or TA handover is complete, a handover penalty is imposed on the original cell during the specified penalty period to prevent an immediate handover back to the original cell. A BQ handover can be an intra- or inter-cell handover. If Bad Quality Handover Optimization All owed is set to YES(Yes), only an inter-cell BQ handover is allowed. If TA Threshold for a co-site neighboring cell is lower than or equal to that for the serving cell, a TA handover to the neighboring cell is not allowed. An interference handover can be an intra- or inter-cell handover. If Interference Handover Optimization Allowed is set to YES(Yes), only an intra-cell interference handover is allowed. However, if intra-cell handovers have occurred several consecutive times, an intra-cell handover is prohibited within a specified period. On an enhanced dual-band network, an MS cannot be handed over to a cell in the same group when overlaid/underlaid load handovers, specified by Load HO From UL Subcell to OL Subcell Allowed andLoad HO of OL Subcell to UL Subcell Enabled , respectively, are allowed. This prevents conflicts between a load handover on a common network and an overlaid/underlaid handover on an enhanced dual-band network. A PBGT handover to a cell in the same group is not allowed if it is triggered between two cells on an enhanced dual-band network. After a fast-moving micro cell handover is complete, a handover penalty is imposed on all neighboring micro cells. An SDCCH handover can be a quick handover, TA handover, BQ handover, quick level drop handover, interference handover, no-DL-MR handover, edge handover, and fast-moving micro cell handover. It cannot be an enhanced dual-band network handover, load handover, inter-layer handover, PBGT handover, AMR handover, better 3G cell handover, concentric cell handover, or tight BCCH handover. 6.4.3 Feature Activation Using the LMT
On the BSC LMT, perform the following steps: 1. Run the SET GCELLHOBASIC command withCurrent HO Control Algorithm set to HOALGORITHM1(Handover algorithm I ). 2. Run the SET GCELLHOEMG command withCurrent HO Control Algorithm set to HOALGORITHM1(Handover algorithm I ). 3. Run the SET GCELLHOFITPEN command withCurrent HO Control Algorithm set to HOALGORITHM1(Handover algorithm I ). 4. Run the SET GCELLHOIUO command withCurrent HO Control Algorithm set to HOALGORITHM1(Handover algorithm I ). 5. Run the SET GCELLHOAD command withMax. Num. of HO Attempts set according to onsite requirements. 6. (Optional) To improve the handover and power control performance when the BCCH TRX partici pates in baseband frequency hopping, run the SET GCELLCCCH command with PWRC set to YES(Yes) and run the SET GCELLOTHEXT command withPower Control and Handover CMP CON Sw set to YES(Yes). 7. Activate t he quick handover algorithm by performing the following steps: a. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. b. Run the MOD G2GNCELL command with its parameters set as follows: Set Chain Neighbor Cell to YES(Yes). Set Chain Neighbour Cell Type andQuick Handover Offset for Neighbor Cell according to onsite requirements. c. Run the SET GCELLHOBASIC command withQuick Handover Enable set to YES(Yes). If a fast move handover is required, set Quick PBGT Handover Enable to YES(Yes).
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
29/201
16/7/2015
Handover Feature Parameter Description NOTE:
Quick handovers consist of fast move handovers and frequency offset handovers. Quick Handover Enable controls whether to allow fast move handovers and frequency offset handovers. Quick PBGT Handover Enable further controls whether to allow fast move handovers. d. Run the SET GCELLHOFAST command with its parameters set as follows: Set Handover Direction Forecast Enable to YES(Yes). Set Quick Handover Up Trigger Level , Quick Handover Down Trigger Level, Quick Move Speed Threshold, Serving Cell Filter Length MR Number , Neighbor Cell Filter Length MR Number , Ignore Measurement Report Number , Quick Handover Punish Time, Quick Handover Punish Value, Quick Handover Offset, Handover Direction Forecast Statistic Times, Handover Direction Forecast Last Times, Frequency Shift Handover Statistic Time, and Frequency Shift Handover Duration according to onsite requirements. NOTE:
Run the MOD GEXT2GCELL command withQuick Handover Offset, Quick Handover Punish Time, and Quick Handover Punish Value set to appropriate values for an external neighboring GSM cell. e. (Optional) Run the SET GCELLOTHEXT command withUL Frequency Adjust Switch, DL Frequency Adjust Switch, and UL Frequency Adjust Value set based on the frequency offset reported by the BTS. 8. Activate the TA handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with TA HO Allowed set to YES(Yes). b. Run the SET GCELLHOEMG command withTA Threshold set according to onsite requirements. c. Run the SET GCELLHOFITPEN command withPenalty Level after TA HO andPenalty Time after TA HO set according to onsite requirements. 9. Activate the BQ handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with BQ HO Allowed set to YES(Yes). b. (Optional) For a non-AMR call, run the SET GCELLHOEMG command withDL Qual. Threshold andUL Qual. Threshold set according to onsite requirements. c. (Optional) For an AMR FR or AMR HR call, run the SET GCELLAMRQUL command withUL Qual. Limit for AMR FR , DL Qual. Limit for AMR FR , UL Qual. Limit for AMR HR , and DL Qual. Limit for AMR HR set according to onsite requirements. d. Run the SET GCELLHOFITPEN command withPenalty Level after BQ HO andPenalty Time after BQ HO set according to onsite requirements. 10. Activate the rapid level drop handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with Rx _Level_Drop HO Allowed set to YE S(Yes) and Edge HO UL RX _LEV Threshold set according to onsite requirements. b. Run the SET GCELLHOEMG command with the following parameters set according to onsite requirements:Filter Parameter A1, Filter Parameter A2, Filter Parameter A3, Filter Parameter A4, Filter Parameter A5, Filter Parameter A6, Filter Parameter A7, Filter Parameter A8, and Filter Parameter B. 11. Activate the interference handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Interference HO Allowed to YES(Yes). Set Intracell HO Allowed andInter-layer HO Threshold according to onsite requirements. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withInter-layer HO Threshold set according to onsite requirements. b. Run the SET GCELLHOAD command withForbidden time after MAX Times set according to onsite requirements. c. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. d. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. e. Run the SET GCELLAMRQUL command with the following parameters set according to onsite requirements:Interfere HO Qual. Thresh 1 for NonAMR FR, Interfere HO Qual. Thresh 2 for Non-AMR FR , Interfere HO Qual. Thresh 3 for Non-AMR FR , Interfere HO Qual. Thresh 4 for NonAMR FR , Interfere HO Qual. Thresh 5 for Non-AMR FR , Interfere HO Qual. Thresh 6 for Non-AMR FR , Interfere HO Qual. Thresh 7 for NonAMR FR , Interfere HO Qual. Thresh 8 for Non-AMR FR , Interfere HO Qual. Thresh 9 for Non-AMR FR , Interfere HO Qual. Thresh 10 for NonAMR FR , Interfere HO Qual. Thresh 11 for Non-AMR FR , Interfere HO Qual. Thresh 12 for Non-AMR FR , and Interfere HO Qual. Thresh Offset for AMR FR . 12. Activate the no-DL-MR handover algorithm by performing the following steps: a. Run the SET GCELLHOEMG command with its parameters set as follows: Set No Dl Mr.HO Allowed to YES(Yes). Set No Dl Mr.Ul Qual HO Limit , Cons.No Dl Mr.HO Allowed Limit, No Dl Mr. HO Statistic Time, and No Dl Mr. HO Last Time according to onsite requirements. b. Run the SET GCELLHOFITPEN command withFilter Length for TCH Qual andFilter Length for SDCCH Qual set according to onsite requirements. 13. Activate the enhanced dual-band network handover algorithm by performing the following steps: a. Run the MOD GCELL command with its parameters set as follows: Set Cell IUO Type toEDB_cell(Enhanced Double Frequency Cell). Set Cell Inner/Extra Property andSame Group Cell Index Type according to onsite requirements. Set Same Group Cell Index orSame Group Cell Name to an appropriate value. b. Run the SET GCELLHOEDBPARA command with the following parameters set according to onsite requirements:Load HO Allowed, UL Subcell General Overload Threshold, Inner Cell Serious OverLoad Thred, Subcell HO Allowed Flow Control Level , Incoming OL Subcell HO Level TH, Step Length of UL Subcell Load HO , UL Subcell Load Hierarchical HO Periods, MOD Step LEN of UL Load HO Period , Step Length of UL Subcell Load HO, UL Subcell Lower Load Threshold, Subcell HO Allowed Flow Control Level , Outgoing OL Subcell HO Level TH , OL Subcell Load Diversity HO Period, Step Length of OL Subcell Load HO, Distance Between Boundaries of Subcells, and Distance Hysteresis Between Boundaries. 14. Activate the load handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Load Handover Support to YES(Yes). Set Edge HO DL RX_LEV Threshold andInter-layer HO Threshold according to onsite requirements.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
30/201
16/7/2015
Handover Feature Parameter Description b. Run the SET GCELLHOAD command with the following parameters set according to onsite requirements:System Flux Threshold for Load HO, Load HO Threshold, Load handover Load Accept Threshold, Load HO Bandwidth, Load HO Step Period , and Load HO Step Level . NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withLoad handover Load Accept Threshold set according to onsite requirements. If a cell is configured with external neighboring UMTS cells, run the MOD GEXT3GCELL command withLoad handover Load Accept Threshold setaccording to onsite requirements. c. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. d. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. 15. Activate the edge handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Edge HO Allowed to YES(Yes). Set Edge HO UL RX_LEV Threshold , Edge HO DL RX_LEV Threshold , Handover Algorithm I Edge HO Watch Time, and Handover Algorithm I Edge HO Valid Time according to onsite requirements. b. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. c. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. d. (Optional) To set different edge handover thresholds for different neighboring GSM cells , perform the following steps: e. Run the SET GCELLHOBASIC command withEnhanced Outgoing Cell Handover Allowed set to YES(Yes). f. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. g. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. 16. Activate the fast-moving micro cell handover algorithm by performing the following steps: a. Run the SET GCELLBASICPARA command withLayer of The Cell set according to onsite requirements. b. Run the SET GCELLHOBASIC command withMS Fast Moving HO Allowed set to YES(Yes) andInter-layer HO Threshold set according to onsite requirements. c. Run the SET GCELLHOAD command with the following parameters set according to onsite requirements:MS Fast-moving Watch Cells, MS Fastmoving Valid Cells, MS Fast-moving Time Threshold, Penalty on MS Fast Moving HO, and Penalty Time on Fast Moving HO. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command with the following parameters setaccording to onsite requirements: Layer of the cell , Inter-layer HO Threshold, Penalty Time on Fast Moving HO, and Penalty on Fast Moving HO. d. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. e. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. 17. Activate the inter-layer handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command withLevel HO Allowed set to YES(Yes) andInter-layer HO Threshold set according to onsite requirements. b. Run the SET GCELLBASICPARA command withLayer of The Cell andCell Priority set according to onsite requirements. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withLayer of the cell andCell Priority set according to onsite requirements. c. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. d. Run the MOD G2GNCELL command with the following parameters set according to onsite requirements:Adjacent Cell Inter-layer HO Hysteresis, Layer HO Watch Time, and Layer HO Valid Time. NOTE:
To set different inter-layer handover conditions for different neighboring GSM cells, do as follows: Set Neighboring Cell Penalty Switch to YES(Yes). Set Penalty Stop Level Threshold, Penalty Timer Length, and Level Penalty Value on Neighboring Cell according to onsite requirements. 18. Activate the PBGT handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with PBGT HO Allowed set to YES(Yes). b. Run the SET GCELLBASICPARA command withLayer of The Cell andCell Priority set according to onsite requirements. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withLayer of the cell andCell Priority set according to onsite requirements. c. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. d. Run the MOD G2GNCELL command with its parameters set as follows: Set Current HO CTRL Algorithm in Source Cell toHOALGORITHM1(Handover algorithm I ). Set Adjacent Cell Inter-layer HO Hysteresis, PBGT Watch Time, and PBGT Valid Time according to onsite requirements. NOTE:
To set different PBGT handover conditions for different neighboring GSM cells, do as follows: Set Neighboring Cell Penalty Switch to YES(Yes). Set Penalty Stop Level Threshold, Penalty Timer Length, and Penalty Stop Level Threshold according to onsite requirements. 19. Activate the AMR handover algorithm by performing the following steps:
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
31/201
16/7/2015
Handover Feature Parameter Description a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Intracell F-H HO Allowed to YES(Yes). Set Intracell F-H HO Stat Time, Intracell F-H HO Last Time, F2H HO Threshold, and H2F HO Threshold according to onsite requirements. b. Run the SET GTRXDEV command withTCH Rate Adjust Allow set to YES(Yes). c. Run the SET GCELLCCACCESS command with at leastFULL_RATE_VER1(Full-rate VER 1), FULL_RATE_VER3(Full-rate VER 3), and HALF_RATE_VER3(Half-rate VER 3) selected underSpeech Version. d. Run the SET BSCBASIC command withUm Interface Tag, Abis Interface Tag, and A Interface Tag set to GSM_PHASE_2Plus. e. Run the SET GCELLCHMGAD command withAMR TCH/H Prior Allowed andAMR TCH/H Prior Cell Load Threshold set according to onsite requirements. 20. Activate the capacity- and quality-based TCHF-TCHH handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Intracell F-H HO Allowed toHOBASECAPANDQUAL(HOBASECAPANDQUAL) . Set AMR F-H Ho Allowed andNon-AMR F-H Ho Allowed to YES(Yes). Set the following parameters according to onsite requirements: Non-AMR F-H Traffic Threshold, F-H Ho Duration , F-H Ho Period, AMR F-H Ho Pathloss Adjust Step, AMR F-H Ho ATCB Adjust Step , AMR F-H Ho Pathloss Threshold, F-H Pathloss Offset Overlay, AMR F-H Ho ATCB Threshold , F-H ATCB Offset Overlay, AMR F-H Ho Qual. Threshold , F-H Ho Stat. Time, F-H Ho Last Time, AMR H-F Traffic Threshold, H-F Ho Duration , AMR H-F Ho ATCB Threshold , H-F ATCB Offset Overlay, Non-AMR H-F Ho Pathloss Threshold, H-F Pathloss Offset Overlay, Non-AMR H-F Ho Qual. Threshold , H-F Ho Stat. Time, H-F Ho Last Time, Non-AMR F-H Traffic Threshold, Non-AMR F-H Ho Pathloss Adjust Step , Non-AMR F-H Ho ATCB Adjust Step , Non-AMR F-H Ho Pathloss Threshold, Non-AMR F-H Ho ATCB Threshold , Non-AMR F-H Ho Qual. Threshold , Non-AMR H-F Traffic Threshold, Non-AMR H-F Ho ATCB Threshold, Non-AMR H-F Ho Pathloss Threshold , and Non-AMR H-F Ho Qual. Threshold . b. Run the SET GTRXDEV command withTCH Rate Adjust Allow set to YES(Yes). c. Run the SET GCELLCCACCESS command withFULL_RATE_VER3(Full-rate VER 3) andHALF_RATE_VER3(Half-rate VER 3) selected under Speech Version. d. Run the SET BSCBASIC command withA Interface Tag set toGSM_PHASE_2Plus. 21. Activate t he SDCCH handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with SDCCH HO Allowed set to YES(Yes). b. Run the SET GCELLHOCTRL command withInter-BSC SDCCH HO ALLowed set according to onsite requirements.
MML Examples
//Deploying HUAWEI I Handover SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOIUO: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, HOTRYCNT=3; //Activating the quick handover algorithm for the BSC6900 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=YES, CHAINNCELLTYPE=QUICK_HO_NCELL_TYPE_A, ADJHOOFFSET=1; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QUICKHOEN=YES, QUICKPBGTHOEN=YES; SET GCELLHOFAST: IDTYPE=BYID, CELLID=0, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, SCELLFILTER=4, NCELLFILTER=4, IGNOREMRNUM=1, TIMEPUNISH=10, HOPUNISHVALUE=63, HOOFFSET=68, MSLEVSTRQPBGT=NO, HODIRFORECASTEN=YES, HODIRSTATIME=3, HODIRLASTTIME=2, AFCHOSTATTIME=4, AFCHOLASTTIME=3; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, FREQADJ=YES, DLFREQADJ=YES, FREQADJVALUE=36671; //Activating the quick handover algorithm for the BSC6910 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=YES, CHAINNCELLTYPE=QUICK_HO_NCELL_TYPE_A, ADJHOOFFSET=1; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QUICKHOEN=YES, QUICKPBGTHOEN=YES; SET GCELLHOFAST: IDTYPE=BYID, CELLID=0, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, SCELLFILTER=4, NCELLFILTER=4, IGNOREMRNUM=1, TIMEPUNISH=10, HOPUNISHVALUE=63, HOOFFSET=68, MSLEVSTRQPBGT=NO, HODIRFORECASTEN=YES, HODIRSTATIME=3, HODIRLASTTIME=2, AFCHOSTATTIME=4, AFCHOLASTTIME=3; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, FREQADJ=YES, DLFREQADJ=YES, FREQADJVALUE=36671; //Activating the TA handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, TAHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, TALIMIT=125; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, SSTAPUNISH=40, TIMETAPUNISH=10; //Activating the BQ handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, BQHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, DLQUALIMIT=55, ULQUALIMIT=60; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, SSBQPUNISH=63, TIMEBQPUNISH=10; //Activating the rapid level drop handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, RXQCKFALLHOEN=YES, ULEDGETHRES=10; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, FLTPARAA1=10, FLTPARAA2=10, FLTPARAA3=10, FLTPARAA4=10, FLTPARAA5=10, FLTPARAA6=10, FLTPARAA7=10, FLTPARAA8=10, FLTPARAB=0; //Activating the interference handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLHOEN=YES, INTERFHOEN=YES, HOTHRES=2; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, BANTIME=20; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; SET GCELLAMRQUL: IDTYPE=BYID, CELLID=0, RXQUAL1=70, RXQUAL2=60, RXQUAL3=59, RXQUAL4=58, RXQUAL5=57, RXQUAL6=56, RXQUAL7=55, RXQUAL8=54, RXQUAL9=53, RXQUAL10=52, RXQUAL11=51, RXQUAL12=50; //Activating the interference handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLHOEN=YES, INTERFHOEN=YES, HOTHRES=2; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, BANTIME=20; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; SET GCELLAMRQUL: IDTYPE=BYID, CELLID=0, RXQUAL1=70, RXQUAL2=60, RXQUAL3=59, RXQUAL4=58, RXQUAL5=57, RXQUAL6=56, RXQUAL7=55,
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
32/201
16/7/2015
Handover Feature Parameter Description
RXQUAL8=54, RXQUAL9=53, RXQUAL10=52, RXQUAL11=51, RXQUAL12=50; //Activating the no-DL-MR handover algorithm SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, NODLMRHOEN=YES, NODLMRHOQUALLIMIT=50, NODLMRHOALLOWLIMIT=8, NODLMRHOSTATTIME=1, NODLMRHOLASTTIME=1; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, DATAQUAFLTLEN=4, SIGQUAFLTLEN=2; //Activating the enhanced dual-band network handover algorithm MOD GCELL: IDTYPE=BYID, CELLID=0, IUOTP=EDB_cell, CELLINEXTP=Inner, DBLFREQADJIDTYPE=BYID, DBLFREQADJCID=1; SET GCELLHOEDBPARA: IDTYPE=BYID, CELLID=0, OUTASSOPTEN=YES; //Activating the load handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, LoadHoEn=YES, DLEDGETHRES=20, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, SYSFLOWLEV=10, TRIGTHRES=90, LoadAccThres=80, LOADOFFSET=25, LOADHOPERIOD=10, LOADHOSTEP=5; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the load handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, LoadHoEn=YES, DLEDGETHRES=20, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, SYSFLOWLEV=10, TRIGTHRES=90, LoadAccThres=80, LOADOFFSET=25, LOADHOPERIOD=10, LOADHOSTEP=5; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the edge handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, FRINGEHOEN=YES, ULEDGETHRES=10, DLEDGETHRES=20, EDGESTAT1=6, EDGELAST1=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the edge handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, FRINGEHOEN=YES, ULEDGETHRES=10, DLEDGETHRES=20, EDGESTAT1=6, EDGELAST1=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the fast-moving micro cell handover algorithm for the BSC6900 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QCKMVHOEN=YES, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, QCKSTATCNT=3, QCKTRUECNT=2, QCKTIMETH=15, SPEEDPUNISH=30, SPEEDPUNISHT=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the fast-moving micro cell handover algorithm for the BSC6910 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, QCKMVHOEN=YES, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, QCKSTATCNT=3, QCKTRUECNT=2, QCKTIMETH=15, SPEEDPUNISH=30, SPEEDPUNISHT=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the inter-layer handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, LEVHOEN=YES, HOTHRES=25; SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67, LEVSTAT=6, LEVLAST=4; //Activating the inter-layer handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, LEVHOEN=YES, HOTHRES=25; SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67, LEVSTAT=6, LEVLAST=4; //Activating the PBGT handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, PBGTHOEN=YES; SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67, PBGTSTAT=6, PBGTLAST=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM1, PBGTMARGIN=68, PBGTSTAT=6, PBGTLAST=4; //Activating the PBGT handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, PBGTHOEN=YES; SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3, PRIOR=PRIOR-3; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67, PBGTSTAT=6, PBGTLAST=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM1, PBGTMARGIN=68, PBGTSTAT=6, PBGTLAST=4; //Activating the AMR handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1, INTRACELLFHHOEN=YES, INFHHOSTAT=10, INFHHOLAST=8, INHOF2HTH=25, INHOH2FTH=12; SET GTRXDEV: TRXID=0, TCHAJFLAG=YES; SET GCELLCCACCESS: IDTYPE=BYID, CELLID=0, VOICEVER=FULL_RATE_VER1-1&FULL_RATE_VER2-0&FULL_RATE_VER3-1&HALF_RATE_VER11&HALF_RATE_VER2-0&HALF_RATE_VER3-1&FULL_RATE_VER5-0; SET BSCBASIC: AVer=GSM_PHASE_2Plus, UmVer=GSM_PHASE_2Plus, AbisVer=GSM_PHASE_2Plus; SET GCELLCHMGAD: IDTYPE=BYID, CELLID=0, AMRTCHHPRIORALLOW=ON, AMRTCHHPRIORLOAD=55; //Activating the capacity- and quality-based TCHF-TCHH handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH= HOALGORITHM1, INTRACELLFHHOEN=HOBASECAPANDQUAL, AMRFULLTOHALFHOALLOW=YES, AMRFULLTOHALFHOTHRESH=75, FULLTOHALFHODURATION=5, FULLTOHALFHOPERIOD=1, AMRFULLTOHALFHOPATHADJSTEP=1, AMRFULLTOHALFHOATCBADJSTEP=2, AMRFULLTOHALFHOPATHTHRESH=100, FULLTOHALFHOPATHOFFSET=10, AMRFULLTOHALFHOATCBTHRESH=20, FULLTOHALFHOATCBOFFSET=20, AMRFULLTOHALFHOQUALTHRESH=0, FULLTOHALFHOSTATTIME=6, FULLTOHALFHOLASTTIME=4, AMRHALFTOFULLHOTHRESH=45, AMRHALFTOFULLHOQUALALLOW=YES, HALFTOFULLHODURATION=5, AMRHALFTOFULLHOATCBTHRESH=4, HALFTOFULLATCBOFFSET=20, AMRHALFTOFULLHOPATHTHRESH=108, HALFTOFULLHOPATHOFFSET=10, AMRHALFTOFULLHOQUALTHRESH=3, HALFTOFULLHOSTATTIME=6, HALFTOFULLHOLASTTIME=4, NOAMRFULLTOHALFHOALLOW=YES, NOAMRFULLTOHALFTHRESH=85, NOAMRFULLTOHALFHOPATHADJSTEP=1, NOAMRFULLTOHALFHOATCBADJSTEP=2, NOAMRFULLTOHALFHOPATHTHRESH=95, NOAMRFULLTOHALFHOATCBTHRESH=30, NOAMRFULLTOHALFHOQUALTHRESH=0, NOAMRHALFTOFULLTHRESH=25, NOAMRHALFTOFULLHOQUALALLOW=YES, NOAMRHALFTOFULLHOATCBTHRESH=14, NOAMRHALFTOFULLHOPATHTHRESH=103, NOAMRHALFTOFULLHOQUALTHRESH=2; SET GTRXDEV: TRXID=0, TCHAJFLAG=YES; SET GCELLCCACCESS: IDTYPE=BYID, CELLID=0, VOICEVER=FULL_RATE_VER1-1&FULL_RATE_VER2-0&FULL_RATE_VER3-1&HALF_RATE_VER1-
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
33/201
16/7/2015
Handover Feature Parameter Description
1&HALF_RATE_VER2-0&HALF_RATE_VER3-1&FULL_RATE_VER5-0; SET BSCBASIC: AVer=GSM_PHASE_2; //Activating the SDCCH handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH= HOALGORITHM1, SIGCHANHOEN=YES; SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, INRBSCSDHOEN=YES; Using the CME NOTE:
When configuring the HUAWEI I Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-2. For the method of performing the CME single configuration, see CME Single ConfigurationOperation Guidee. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help Table 6-2 Configuring parameters on the CME SN
Managed Object (MO)
NE
Parameter Name
Parameter ID
Supports CME Batch Modification Center
1
GCELLHOBASIC
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
2
GCELLHOEMG
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
3
GCELLHOFITPEN
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
4
GCELLHOIUO
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
5
GCELLHOAD
BSC6900/BSC6910
Max. Num. of HO Attempts
HOTRYCNT
Yes
6
GCELLCCCH
BSC6900/BSC6910
PWRC
CANPC
Yes
BSC6900/BSC6910
Power Control and Handover CMP CON Sw
PCHOCMPCON
Yes
BSC6900/BSC6910
Index Type
IDTYPE
No
NOTE:
Configure this MO if you need to improve the handover and power control performance when the BCCH TRX participates in baseband frequency hopping. 7
GCELLOTHEXT NOTE:
Configure this MO if you need to improve the handover and power control performance when the BCCH TRX participates in baseband frequency hopping. 8
G2GNCELL
Source Cell Index
NOTE:
Configure this MO to activate the quick handover algorithm.
Neighbor 2G Cell Index
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 9
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Chain Neighbor Cell ISCHAINNCELL
ISNCELL
No
NOTE:
Configure this MO to activate the quick handover algorithm. 10
G2GNCELL
Chain Neighbour Cell Type
NOTE:
Configure this MO to activate the quick handover algorithm. 11
GCELLHOBASIC
No
CHAINNCELLTYPE
Quick Handover Offset ADJHOOFFSET for Neighbor Cell BSC6900/BSC6910
Quick Handover Enable
BSC6900/BSC6910
Quick PBGT Handover QUICKPBGTHOEN Enable
QUICKHOEN
Yes
NOTE:
Configure this MO to activate the quick handover algorithm. 12
GCELLHOBASIC
Yes
NOTE:
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
34/201
16/7/2015
Handover Feature Parameter Description Configure this MO to activate the quick handover algorithm.
13
GCELLHOFAST
BSC6900/BSC6910
NOTE:
Configure this MO to activate the quick handover algorithm.
Handover Direction Forecast Enable
HODIRFORECASTEN
Quick Handover Up Trigger Level
HOUPTRIGE
Yes
Quick Handover Down HODOWNTRIGE Trigger Level Quick Move Speed Threshold
MOVESPEEDTHRES
Serving Cell Filter Length MR Number
SCELLFILTER
Neighbor Cell Filter Length MR Number
NCELLFILTER
Ignore Measurement Report Number
IGNOREMRNUM
Quick Handover Punish Time
TIMEPUNISH
Quick Handover Punish Value
HOPUNISHVALUE
Quick Handover Offset HOOFFSET
14
GCELLOTHEXT
Handover Direction Forecast Statistic Times
HODIRSTATIME
Handover Direction Forecast Last Times
HODIRLASTTIME
Frequency Shift Handover Statistic Time
AFCHOSTATTIME
Frequency Shift Handover Duration
AFCHOLASTTIME
UL Frequency Adjust Switch
FREQADJ
DL Frequency Adjust Switch
DLFREQADJ
UL Frequency Adjust Value
FREQADJVALUE
BSC6900/BSC6910
TA HO Allowed
TAHOEN
Yes
BSC6900/BSC6910
TA Threshold
TALIMIT
Yes
BSC6900/BSC6910
Penalty Level after TA SSTAPUNISH HO
BSC6900/BSC6910
NOTE:
Configure this MO to activate the quick handover algorithm.
15
GCELLHOBASIC
Yes
NOTE:
Configure this MO to activate the TA handover algorithm. 16
GCELLHOEMG
NOTE:
Configure this MO to activate the TA handover algorithm. 17
GCELLHOFITPEN
Yes
NOTE:
Configure this MO to activate the TA handover algorithm. 18
GCELLHOBASIC
Penalty Time after TA TIMETAPUNISH HO BSC6900/BSC6910
BQ HO Allowed
BSC6900/BSC6910
DL Qual. Threshold DLQUALIMIT
BQHOEN
Yes
NOTE:
Configure this MO to activate the BQ handover algorithm. 19
GCELLHOEMG
Yes
NOTE:
Configure this MO to activate the BQ handover algorithm. 20
GCELLAMRQUL
UL Qual. Threshold ULQUALIMIT BSC6900/BSC6910
NOTE:
Configure this MO to activate the BQ handover algorithm.
21
GCELLHOFI TPEN
BSC6900/BSC6910
UL Qual. Limit for AMR FR
ULQUALIMITAMRFR
DL Qual. Limit for AMR FR
DLQUALIMITAMRFR
UL Qual. Limit for AMR HR
ULQUALIMITAMRHR
DL Qual. Limit for AMR HR
DLQUALIMITAMRHR
Penalty Level after BQ SSBQPUNISH HO
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
Yes
Yes
35/201
16/7/2015
Handover Feature Parameter Description NOTE:
Configure this MO to activate the BQ handover algorithm. 22
23
GCELLHOBASIC
Penalty Time after BQ TIMEBQPUNISH HO
NOTE:
Rx_Level_Drop HO Allowed set to YES(Yes)
Configure this MO to activate the rapid level drop handover algorithm.
Edge HO UL RX_LEV ULEDGETHRES Threshold
GCELLHOEMG
BSC6900/BSC6910
BSC6900/BSC6910
RXQCKFALLHOEN
Filter Parameter A1 FLTPARAA1
Yes
Yes
Filter Parameter A2 FLTPARAA2
NOTE:
Configure this MO to activate the rapid level drop handover algorithm.
Filter Parameter A3 FLTPARAA3 Filter Parameter A4 FLTPARAA4 Filter Parameter A5 FLTPARAA5 Filter Parameter A6 FLTPARAA6 Filter Parameter A7 FLTPARAA7 Filter Parameter A8 FLTPARAA8 Filter Parameter B
24
GCELLHOBASIC
BSC6900/BSC6910
Interference HO Allowed
FLTPARAB INTERFHOEN
Yes
NOTE:
Intracell HO Allowed INTRACELLHOEN
Configure this MO to activate the interference handover algorithm. 25
GCELLHOAD
Inter-layer HO Threshold
HOTHRES
BSC6900/BSC6910
Forbidden time after BANTIME MAX Times
Yes
BSC6900/BSC6910
Index Type
No
NOTE:
Configure this MO to activate the interference handover algorithm. 26
G2GNCELL
NOTE:
Source Cell Index
Configure this MO to activate the interference handover algorithm.
Neighbor 2G Cell Index
IDTYPE
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 27
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
BSC6900/BSC6910
Interfere HO Qual. RXQUAL1 Thresh 1 for Non-AMR FR
ISNCELL
No
INTELEVHOHYST
No
NOTE:
Configure this MO to activate the interference handover algorithm. 28
G2GNCELL NOTE:
Configure this MO to activate the interference handover algorithm. 29
GCELLAMRQUL NOTE:
Configure this MO to activate the interference handover algorithm.
Yes
RXQUAL2 Interfere HO Qual. Thresh 2 for Non-AMR FR RXQUAL3 Interfere HO Qual. Thresh 3 for Non-AMR FR RXQUAL4 Interfere HO Qual. Thresh 4 for Non-AMR FR RXQUAL5 Interfere HO Qual. Thresh 5 for Non-AMR FR
Interfere HO Qual. RXQUAL6 Thresh 6 for Non-AMR FR RXQUAL7 Interfere HO Qual. Thresh 7 for Non-AMR FR RXQUAL8 Interfere HO Qual. Thresh 8 for Non-AMR FR
Interfere HO Qual.
RXQUAL9
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
36/201
16/7/2015
Handover Feature Parameter Description Thresh 9 for Non-AMR FR Interfere HO Qual. Thresh 10 for Non AMR FR
RXQUAL10
Interfere HO Qual. Thresh 11 for Non AMR FR
RXQUAL11
Interfere HO Qual. Thresh 12 for Non AMR FR
RXQUAL12
Interfere HO Qual. RXLEVOFF Thresh Offset for AMR FR 30
GCELLHOEMG
BSC6900/BSC6910
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm.
No Dl Mr.HO Allowed NODLMRHOEN No Dl Mr.Ul Qual HO Limit
NODLMRHOQUALLIMIT
Cons.No Dl Mr.HO Allowed Limit
NODLMRHOALLOWLIMIT
Yes
No Dl Mr. HO Statistic NODLMRHOSTATTIME Time
31
GCELLHOFITPEN
BSC6900/BSC6910
No Dl Mr. HO Last Time
NODLMRHOLASTTIME
Filter Length for TCH Qual and
DATAQUAFLTLEN
Filter Length for SDCCH Qual
SIGQUAFLTLEN
Yes
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm. 32
GCELL
BSC6900/BSC6910
NOTE:
Configure this MO to activate the enhanced dual-band network handover algorithm.
33
GCELLHOEDBPARA NOTE:
Configure this MO to activate the enhanced dual-band network handover algorithm.
BSC6900/BSC6910
Cell IUO Type
IUOTP
Cell Inner/Extra Property
CELLINEXTP
Same Group Cell Index Type
DBLFREQADJIDTYPE
Same Group Cell Index Type
DBLFREQADJIDTYPE
Same Group Cell Index
DBLFREQADJCID
Same Group Cell Name
DBLFREQADJCNAME
Load HO Allowed
OUTLOADHOENABLE
UL Subcell General Overload Threshold
OUTGENOVERLDTHRED
Inner Cell Serious OverLoad Thred
INNSERIOVERLDTHRED
Subcell HO Allowed Flow Control Level
EDBSYSFLOWLEV
Incoming OL Subcell HO Level TH
INTOINNREXLEVTHRED
Step Length of UL Subcell Load HO
OUTLOADHOSTEP
UL Subcell Load Hierarchical HO Periods
OUTLOADHOPERIOD
MOD Step LEN of UL Load HO Period
OUTLOADHOMODPERI
Step Length of UL Subcell Load HO
OUTLOADHOSTEP
UL Subcell Lower Load Threshold
OUTLOWLOADTHRED
Subcell HO Allowed Flow Control Level
EDBSYSFLOWLEV
Outgoing OL Subcell HO Level TH
OUTINNREXLEVTHRED
OL Subcell Load Diversity HO Period
INNLOADHOPERI
Step Length of OL Subcell Load HO
INNLOADHOSTEP
Yes
Yes
Distance Between ATCBTHRED Boundaries of Subcells Distance Hysteresis Between Boundaries
ATCBHYST
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
37/201
16/7/2015 34
Handover Feature Parameter Description GCELLHOBASIC
BSC6900/BSC6910
Load Handover Support
LoadHoEn
Yes
NOTE:
Edge HO DL RX_LEV DLEDGETHRES Threshold
Configure this MO to activate the load handover algorithm.
Inter-layer HO Threshold 35
GCELLHOAD
BSC6900/BSC6910
NOTE:
HOTHRES
SYSFLOWLEV System Flux Threshold for Load HO
Yes
Load HO Threshold TRIGTHRES
Configure this MO to activate the load handover algorithm.
Load handover Load Accept Threshold
LoadAccThres
Load HO Bandwidth LOADOFFSET Load HO Step Period LOADHOPERIOD Load HO Step Level LOADHOSTEP 36
G2GNCELL
BSC6900/BSC6910
Index Type
IDTYPE
Source Cell Index
NOTE:
Configure this MO to activate the load handover algorithm.
Neighbor 2G Cell Index
No
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 37
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
BSC6900/BSC6910
Edge HO Allowed
ISNCELL
No
INTELEVHOHYST
No
NOTE:
Configure this MO to activate the load handover algorithm. 38
G2GNCELL NOTE:
Configure this MO to activate the load handover algorithm. 39
GCELLHOBASIC
FRINGEHOEN
Edge HO UL RX_LEV ULEDGETHRES Threshold
NOTE:
Configure this MO to activate the edge handover algorithm.
Edge HO DL RX_LEV DLEDGETHRES Threshold Handover Algorithm I EDGESTAT1 Edge HO Watch Time
40
G2GNCELL
BSC6900/BSC6910
Handover Algorithm I Edge HO Valid Time
EDGELAST1
Index Type
IDTYPE
Source Cell Index
NOTE:
Configure this MO to activate the edge handover algorithm.
Neighbor 2G Cell Index
No
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 41
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
BSC6900/BSC6910
EDOUTHOADEN Enhanced Outgoing Cell Handover Allowed
Yes
BSC6900/BSC6910
Index Type
No
ISNCELL
No
INTELEVHOHYST
No
NOTE:
Configure this MO to activate the edge handover algorithm. 42
G2GNCELL NOTE:
Configure this MO to activate the edge handover algorithm. 43
GCELLHOBASIC NOTE:
Configure this MO to activate the edge handover algorithm. 44
G2GNCELL
IDTYPE
Source Cell Index
NOTE:
Configure this MO to activate the edge handover algorithm.
Neighbor 2G Cell Index
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 45
G2GNCELL
BSC6910
Is External Cell
ISNCELL
No
NOTE:
Configure this MO to activate the edge handover algorithm.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
38/201
16/7/2015 46
Handover Feature Parameter Description G2GNCELL
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
BSC6900/BSC6910
Layer of The Cell
BSC6900/BSC6910
NOTE:
INTELEVHOHYST
No
LAYER
Yes
MS Fast Moving HO Allowed
QCKMVHOEN
Yes
Inter-layer HO Threshold
HOTHRES
MS Fast-moving Watch Cells
QCKSTATCNT
Configure this MO to activate the edge handover algorithm. 47
GCELLBASICPARA
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 48
GCELLHOBASIC NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 49
GCELLHOAD
BSC6900/BSC6910
NOTE:
MS Fast-moving Valid QCKTRUECNT Cells
Configure this MO to activate the fast-moving micro cell handover algorithm.
50
G2GNCELL
Yes
MS Fast-moving Time QCKTIMETH Threshold
BSC6900/BSC6910
Penalty on MS Fast Moving HO
SPEEDPUNISH
Penalty Time on Fast Moving HO
SPEEDPUNISHT
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the fast-moving micro cell handover algorithm.
Neighbor 2G Cell Index
No
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 51
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
BSC6900/BSC6910
Level HO Allowed
ISNCELL
No
INTELEVHOHYST
No
LEVHOEN
Yes
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 52
G2GNCELL NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 53
GCELLHOBASIC
NOTE:
Inter-layer HO Threshold
Configure this MO to activate the inter-layer handover algorithm. 54
GCELLBASICPARA
BSC6900/BSC6910
HOTHRES
Layer of The Cell
LAYER
Yes
NOTE:
Configure this MO to activate the inter-layer handover algorithm. 55
G2GNCELL
BSC6900/BSC6910
Cell Priority
PRIOR
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the inter-layer handover algorithm.
Neighbor 2G Cell Index
No
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 56
G2GNCELL
BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Interlayer HO Hysteresis
ISNCELL
No
INTELEVHOHYST
No
NOTE:
Configure this MO to activate the inter-layer handover algorithm. 57
G2GNCELL NOTE:
Configure this MO to activate the inter-layer handover algorithm.
Layer HO Watch Time LEVSTAT Layer HO Valid Time LEVLAST
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
39/201
16/7/2015 58
Handover Feature Parameter Description GCELLHOBASIC
BSC6900/BSC6910
Quick PBGT Handover PBGTHOEN Enable
Yes
BSC6900/BSC6910
Layer of The Cell
Yes
NOTE:
Configure this MO to activate the PBGT handover algorithm. 59
GCELLBASICPARA
LAYER
NOTE:
Configure this MO to activate the PBGT handover algorithm. 60
G2GNCELL
BSC6900/BSC6910
Cell Priority
PRIOR
Index Type
IDTYPE
Source Cell Index
NOTE:
Configure this MO to activate the PBGT handover algorithm.
Neighbor 2G Cell Index
No
SRC2GNCELLID NBR2GNCELLID
Neighboring Cell Type QUERYTYPE 61
G2GNCELL
BSC6910
Is External Cell
ISNCELL
No
BSC6900/BSC6910
Current HO CTRL Algorithm in Source Cell
SRCHOCTRLSWITCH
No
Adjacent Cell Interlayer HO Hysteresis
INTELEVHOHYST
NOTE:
Configure this MO to activate the PBGT handover algorithm. 62
G2GNCELL NOTE:
Configure this MO to activate the PBGT handover algorithm.
PBGT Watch Time PBGTSTAT PBGT Valid Time 63
GCELLHOBASIC
BSC6900/BSC6910
NOTE:
Configure this MO to activate the AMR handover algorithm.
64
GTRXDEV
PBGTLAST
Intracell F-H HO Allowed
INTRACELLFHHOEN
Intracell F-H HO Stat Time
INFHHOSTAT
Intracell F-H HO Last Time
INFHHOLAST
F2H HO Threshold
INHOF2HTH
H2F HO Threshold
INHOH2FTH
BSC6900/BSC6910
TCH Rate Adjust Allow
BSC6900/BSC6910
Speech Version
BSC6900/BSC6910
Um Interface Tag Abis Interface Tag
Yes
TCHAJFLAG
Yes
VOICEVER
Yes
UmVer
Yes
AbisVer
NOTE:
Configure this MO to activate the AMR handover algorithm. 65
GCELLCCACCESS
NOTE:
Configure this MO to activate the AMR handover algorithm. 66
BSCBASIC NOTE:
Configure this MO to activate the AMR handover algorithm. 67
GCELLCHMGAD
A Interface Tag BSC6900/BSC6910
Aver
AMR TCH/H Prior AMRTCHHPRIORALLOW Allowed
Yes
NOTE:
Configure this MO to activate the AMR handover algorithm. 68
GCELLHOBASIC NOTE:
Configure this MO to activate the capacity- and qualitybased TCHF-TCHH handover algorithm.
AMR TCH/H Prior Cell AMRTCHHPRIORLOAD Load Threshold BSC6900/BSC6910
Intracell F-H HO Allowed
INTRACELLFHHOEN
Yes
AMR F-H Ho Allowed AMRFULLTOHALFHOALLOW Non-AMR F-H Ho Allowed
NOAMRFULLTOHALFHOALLOW
Non-AMR F-H Traffic Threshold
NOAMRFULLTOHALFTHRESH
F-H Ho Duration
FULLTOHALFHODURATION
F-H Ho Period
FULLTOHALFHOPERIOD
AMR F-H Ho Pathloss AMRFULLTOHALFHOPATHADJSTEP Adjust Step AMR F-H Ho ATCB Adjust Step
AMRFULLTOHALFHOATCBADJSTEP
AMR F-H Ho Pathloss AMRFULLTOHALFHOPATHTHRESH Threshold
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
40/201
16/7/2015
Handover Feature Parameter Description F-H Pathloss Offset Overlay
FULLTOHALFHOPATHOFFSET
AMR F-H Ho ATCB Threshold
AMRFULLTOHALFHOATCBTHRESH
F-H ATCB Offset Overlay
FULLTOHALFHOATCBOFFSET
AMR F-H Ho Qual. Threshold
AMRFULLTOHALFHOQUALTHRESH
F-H Ho Stat. Time
FULLTOHALFHOSTATTIME
F-H Ho Last Time
FULLTOHALFHOLASTTIME
AMR H-F Traffic Threshold
AMRHALFTOFULLHOTHRESH
H-F Ho Duration
69
GTRXDEV
HALFTOFULLHODURATION
AMR H-F Ho ATCB Threshold
AMRHALFTOFULLHOATCBTHRESH
H-F ATCB Offset Overlay
HALFTOFULLATCBOFFSET
Non-AMR H-F Ho Pathloss Threshold
NOAMRHALFTOFULLHOPATHTHRESH
H-F Pathloss Offset Overlay
HALFTOFULLHOPATHOFFSET
Non-AMR H-F Ho Qual. Threshold
NOAMRHALFTOFULLHOQUALTHRESH
H-F Ho Stat. Time
HALFTOFULLHOSTATTIME
H-F Ho Last Time
HALFTOFULLHOLASTTIME
Non-AMR F-H Traffic Threshold
NOAMRFULLTOHALFTHRESH
Non-AMR F-H Ho Pathloss Adjust Step
NOAMRFULLTOHALFHOPATHADJSTEP
Non-AMR F-H Ho ATCB Adjust Step
NOAMRFULLTOHALFHOATCBADJSTEP
Non-AMR F-H Ho Pathloss Threshold
NOAMRFULLTOHALFHOPATHTHRESH
Non-AMR F-H Ho ATCB Threshold
NOAMRFULLTOHALFHOATCBTHRESH
Non-AMR F-H Ho Qual. Threshold
NOAMRFULLTOHALFHOQUALTHRESH
Non-AMR H-F Traffic Threshold
NOAMRHALFTOFULLTHRESH
Non-AMR H-F Ho ATCB Threshold
NOAMRHALFTOFULLHOATCBTHRESH
Non-AMR H-F Ho Pathloss Threshold
NOAMRHALFTOFULLHOPATHTHRESH
Non-AMR H-F Ho Qual. Threshold
NOAMRHALFTOFULLHOQUALTHRESH
BSC6900/BSC6910
TCH Rate Adjust Allow
TCHAJFLAG
Yes
BSC6900/BSC6910
Speech Version
VOICEVER
Yes
BSC6900/BSC6910
A Interface Tag
Aver
Yes
BSC6900/BSC6910
SDCCH HO Allowed SIGCHANHOEN
NOTE:
Configure this MO to activate the capacity- and qualitybased TCHF-TCHH handover algorithm. 70
GCELLCCACCESS NOTE:
Configure this MO to activate the capacity- and qualitybased TCHF-TCHH handover algorithm. 71
BSCBASIC NOTE:
Configure this MO to activate the capacity- and qualitybased TCHF-TCHH handover algorithm. 72
GCELLHOBASIC
Yes
NOTE:
Configure this MO to activate the SDCCH handover algorithm.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
41/201
16/7/2015 73
Handover Feature Parameter Description GCELLHOCTRL
BSC6900/BSC6910
NOTE:
Inter-BSC SDCCH HO ALLowed
INRBSCSDHOEN
Yes
Configure this MO to activate the SDCCH handover algorithm. 6.4.4 Activation Observation
On the BSC LMT, perform the following steps: 1. Run the LST GCELLHOBASIC command to query the value of Current HO Control Algorithm . Expected result: The value of Current HO Control Algorithm is Handover algorithm I. 2. Trace BSSAP messages over the A interface. Expected result: The BSC sends a Handover Performed message to the MSC. The cause value contained in the Handover Performed message varies depending on the handover type. The following table lists the cause value for each handover type. Handover Type
Cause Value
Quick handover
better-cell
TA handover
distance
BQ handover
uplink-quality or downlink-quality
Rapid level drop handover
uplink-strength
Interference handover
uplink-quality or downlink-quality
H andov er due t o no dow nl ink meas urement report
upl ink -quali ty
Enhanced dual-band network handover
better-cell or traffic
Load handover
traffic
Edge handover
uplink-strength or downlink-strength
Fast-moving micro cell handover
better-cell
Inter-layer handover
better-cell
PBGT handover
better-cell
AMR handover
downlink-quality
Capacity- and quality-based TCHF-TCHH handover
downlink-quality
SDCCH handover
better-cell, distance, uplink-quality, downlink-quality, traffic, uplink-strength, or downlink-strength
6.4.5 Deactivation
The HUAWEI I Handover feature does not need to be deactivated. 6.5 Deploying HUAWEI II Handover and AMR FR/HR Dynamic Adjustment 6.5.1 Deployment Requirements Table 6-3 Deployment requirements Aspect
Requirement
Related features
See chapter 4 Related Features.
BSC
None
BTS
None
GSM networking
None
MS
None
MSC
None
License
The license controlling this feature has been activated. For details on how to activate the license, see License Management Feature Parameter Description. For details about license items, see License Control Item Description.
Others
None
6.5.2 Precautions
After a quick handover, BQ handover, or TA handover is complete, a handover penalty is imposed on the original cell during the specified penalty period to prevent an immediate handover back to the original cell. In the Huawei II handover algorithm, do not select the serving cell as the target cell for a BQ handover. If TA Threshold for a co-site neighboring cell is lower than or equal to that for the serving cell, a TA handover to the neighboring cell is not allowed. The interference handover can be an intra-cell handover. However, if intra-cell handovers have occurred several consecutive times, an intra-cell handover is prohibited within a specified period. In the Huawei II handover algorithm, always select the serving cell as the target cell for an interference handover. On an enhanced dual-band network, an MS cannot be handed over to a cell in the same group when overlaid/underlaid load handovers, specified by Load HO From UL Subcell to OL Subcell Allowed andLoad HO of OL Subcell to UL Subcell Enabled , respectively, are allowed. This prevents conflicts between a load handover on a common network and an overlaid/underlaid handover on an enhanced dual-band network. A PBGT handover to a cell in the same group is not allowed if it is triggered between two cells on an enhanced dual-band handover. After a fast-moving micro cell handover is complete, a handover penalty is imposed on all neighboring micro cells. The decision on a load handover is not made independently. Instead, it is made during network adjustment. However, the decision on a load handover is made when the decision on a better-cell handover is made. That is, a load handover is triggered only when the conditions for triggering both a load handover and a better-cell handover are met.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
42/201
16/7/2015
Handover Feature Parameter Description The better-cell handover is unique to the Huawei II handover algorithm. It is an optimization of the inter-layer handover and PBGT handover in the Huawei I handover algorithm.
6.5.3 Feature Activation Using the LMT
On the BSC LMT, perform the following steps: 1. Run the SET GCELLHOBASIC command withCurrent HO Control Algorithm set to HOALGORITHM2(Handover algorithm II ). 2. Run the SET GCELLHOEMG command withCurrent HO Control Algorithm set to HOALGORITHM2(Handover algorithm II ). 3. Run the SET GCELLHOFITPEN command withCurrent HO Control Algorithm set to HOALGORITHM2(Handover algorithm II ). 4. Run the SET GCELLHOIUO command withCurrent HO Control Algorithm set to HOALGORITHM2(Handover algorithm II ). 5. Run the SET GCELLHOAD command withMax. Num. of HO Attempts set according to onsite requirements. 6. (Optional) To improve the handover and power control performance when the BCCH TRX partici pates in baseband frequency hopping, run the SET GCELLCCCH command with PWRC set to YES(Yes) and run the SET GCELLOTHEXT command withPower Control and Handover CMP CON Sw set to YES(Yes). 7. Activate t he quick handover algorithm by performing the following steps: a. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. b. Run the MOD G2GNCELL command with its parameters set as follows: Set Chain Neighbor Cell to YES(Yes). Set Chain Neighbour Cell Type andQuick Handover Offset for Neighbor Cell according to onsite requirements. c. Run the SET GCELLHOBASIC command withQuick Handover Enable set to YES(Yes). If a fast move handover is required, set Quick PBGT Handover Enable to YES(Yes). NOTE:
Quick handovers consist of fast move handovers and frequency offset handovers. Quick Handover Enable controls whether to allow fast move handovers and frequency offset handovers. Quick PBGT Handover Enable further controls whether to allow fast move handovers. d. Run the SET GCELLHOFAST command with the following parameters set according to onsite requirements: Quick Move Speed Threshold, Quick Handover Up Trigger Level, Quick Handover Down Trigger Level , Quick Handover Offset, Quick Handover Punish Time, Quick Handover Punish Value, Serving Cell Filter Length MR Number , Neighbor Cell Filter Length MR Number , Ignore Measurement Report Number , EN Quick PBGT HO ALG When MS Leaves BTS , Handover Direction Forecast Enable, Handover Direction Forecast Statistic Times, Frequency Shift Handover Statistic Time, Frequency Shift Handover Duratio n and Fast Handover Punish Control Switch. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withQuick Handover Offset, Quick Handover Punish Time, and Quick Handover Punish Value set to appropriate values. e. Run the SET GCELLOTHEXT command to set extended parameters of a cell. In this step, set UL Frequency Adjust Switch, DL Frequency Adjust Switch, and UL Frequency Adjust Value based on the frequency offset reported by the BTS. 8. Activate the TA handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with TA HO Allowed set to YES(Yes). b. Run the SET GCELLHOEMG command withTA Threshold set according to onsite requirements. c. Run the SET GCELLHOFITPEN command withPenalty Level after TA HO andPenalty Time after TA HO set according to onsite requirements. d. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. e. Run the MOD G2GNCELL command withTA HO Watch Time andTA HO Valid Time set according to onsite requirements. 9. Activate the BQ handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with BQ HO Allowed set to YES(Yes). b. (Optional) For a non-AMR call, run the SET GCELLHOEMG command withDL Qual. Threshold andUL Qual. Threshold set according to onsite requirements. c. (Optional) For an AMR FR or AMR HR call, run the SET GCELLAMRQUL command withUL Qual. Limit for AMR FR , DL Qual. Limit for AMR FR , UL Qual. Limit for AMR HR , and DL Qual. Limit for AMR HR set according to onsite requirements. d. Run the SET GCELLHOFITPEN command withPenalty Level after BQ HO andPenalty Time after BQ HO set according to onsite requirements. e. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. f. Run the MOD G2GNCELL command withBQ HO Watch Time andBQ HO Valid Time set according to onsite requirements. 10. Activate the interference handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set both Interference HO Allowed andIntracell HO Allowed to YES(Yes). Set Inter-layer HO Threshold, Interfere HO Static Time, and Interfere HO Valid Time according to onsite requirements. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withInter-layer HO Threshold setaccording to onsite requirements. b. Run the SET GCELLHOAD command withForbidden time after MAX Times, MAX Consecutive HO Times, and Interval for Consecutive HO Jud. set according to onsite requirements. c. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. d. Run the MOD G2GNCELL command withAdjacent Cell Inter-layer HO Hysteresis set according to onsite requirements. e. Run the SET GCELLAMRQUL command with the following parameters set according to onsite requirements:Interfere HO Qual. Thresh 1 for NonAMR FR, Interfere HO Qual. Thresh 2 for Non-AMR FR , Interfere HO Qual. Thresh 3 for Non-AMR FR , Interfere HO Qual. Thresh 4 for NonAMR FR , Interfere HO Qual. Thresh 5 for Non-AMR FR , Interfere HO Qual. Thresh 6 for Non-AMR FR , Interfere HO Qual. Thresh 7 for NonAMR FR , Interfere HO Qual. Thresh 8 for Non-AMR FR , Interfere HO Qual. Thresh 9 for Non-AMR FR , Interfere HO Qual. Thresh 10 for NonAMR FR , Interfere HO Qual. Thresh 11 for Non-AMR FR , Interfere HO Qual. Thresh 12 for Non-AMR FR , and Interfere HO Qual. Thresh Offset for AMR FR . 11. Activate the no-DL-MR handover algorithm by performing the following steps:
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
43/201
16/7/2015
Handover Feature Parameter Description a. Run the SET GCELLHOEMG command with its parameters set as follows: Set No Dl Mr.HO Allowed to YES(Yes). Set UL Qual. Threshold, Cons.No Dl Mr.HO Allowed Limit, No Dl Mr. HO Statistic Time, and No Dl Mr. HO Last Time according to onsite requirements. b. Run the SET GCELLAMRQUL command withUL Qual. Limit for AMR FR andUL Qual. Limit for AMR HR set according to onsite requirements. c. Run the SET GCELLHOFITPEN command withFilter Length for TCH Qual andFilter Length for SDCCH Qual set according to onsite requirements. d. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. e. Run the MOD G2GNCELL command withUL BQ HO Static Time andUL BQ HO Last Time set according to onsite requirements. 12. Activate the enhanced dual-band network handover algorithm by performing the following steps: a. Run the MOD GCELL command with its parameters set as follows: Set Cell IUO Type toEDB_cell(Enhanced Double Frequency Cell). Set Cell Inner/Extra Property andSame Group Cell Index Type according to onsite requirements. Set Same Group Cell Index orSame Group Cell Name to an appropriate value. b. Run the SET GCELLHOEDBPARA command with the following parameters set according to onsite requirements:Load HO Allowed, UL Subcell General Overload Threshold, Inner Cell Serious OverLoad Thred, Subcell HO Allowed Flow Control Level , Incoming OL Subcell HO Level TH, UL Subcell Serious Overload Threshold, UL Subcell Load Hierarchical HO Periods, MOD Step LEN of UL Load HO Period , Step Length of UL Subcell Load HO, UL Subcell Lower Load Threshold, Subcell HO Allowed Flow Control Level , Outgoing OL Subcell HO Level TH , OL Subcell Load Diversity HO Period, Step Length of OL Subcell Load HO, Distance Between Boundaries of Subcells, and Distance Hysteresis Between Boundaries. 13. Activate the edge handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set Edge HO Allowed to YES(Yes). Set Edge HO UL RX_LEV Threshold , Edge HO DL RX_LEV Threshold , Handover Algorithm II Edge HO Watch Time, and Handover Algorithm II Edge HO Valid Time according to onsite requirements. b. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. c. Run the MOD G2GNCELL command with the following parameters set according to onsite requirements:Inter-cell HO Hysteresis, Edge HO AdjCell Watch Time, and Edge HO AdjCell Valid Time. d. (Optional) To set different edge handover thresholds for different neighboring GSM cells, perform the following steps: e. Run the SET GCELLHOBASIC command withEnhanced Outgoing Cell Handover Allowed set to YES(Yes). f. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. g. Run the MOD G2GNCELL command withEnhanced Outgoing Cell Handover Offset set according to onsite requirements. 14. Activate the fast-moving micro cell handover algorithm by performing the following steps: a. Run the SET GCELLBASICPARA command withLayer of The Cell set according to actual conditions. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withLayer of the cell setaccording to actual conditions. b. Run the SET GCELLHOBASIC command withMS Fast Moving HO Allowed set to YES(Yes) andInter-layer HO Threshold set according to onsite requirements. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withInter-layer HO Threshold setaccording to onsite requirements. c. Run the SET GCELLHOAD command with the following parameters set according to onsite requirements:MS Fast-moving Watch Cells, MS Fastmoving Valid Cells, MS Fast-moving Time Threshold, Penalty on MS Fast Moving HO, and Penalty Time on Fast Moving HO. NOTE:
If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withPenalty Time on Fast Moving HO andPenalty on Fast Moving HO set to appropriate values. d. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. e. Run the MOD G2GNCELL command with the following parameters set according to onsite requirements:Adjacent Cell Inter-layer HO Hysteresis, HCS HO Watch Time, and HCS HO Valid Time . 15. Activate the better-cell handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command withBetter Cell Handover Enable set to YES(Yes) andPathloss Ho. Enable set according to onsite requirements. b. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. c. Run the MOD G2GNCELL command withBetter Cell HO Watch Time andBetter Cell HO Valid Time set according to onsite requirements. d. (Optional) To set different better-cell handover conditions for different neighboring GSM cells , perform the following steps: e. Run the SET GCELLHOBASIC command withEnhanced Outgoing Cell Handover Allowed set to YES(Yes). f. Run the MOD G2GNCELL command withIndex Type, Source Cell Index, Neighbor 2G Cell Index, and Neighboring Cell Type set according to actual conditions. If a BSC6910 is used, set Is External Cell to an appropriate value. g. Run the MOD G2GNCELL command with its parameters set as follows for different neighboring GSM cells: Set Neighboring Cell Penalty Switch to YES(Yes). Set Enhanced Outgoing Cell Handover Offset, Penalty Stop Level Threshold, Penalty Timer Length, and Level Penalty Value on Neighboring Cell according to onsite requirements. 16. (Optional) Activ ate the load handover penalty inheritance algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with Load Handover Support set to YES(Yes).
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
44/201
16/7/2015
Handover Feature Parameter Description b. Run the SET GCELLHOFITPEN command withLoad HO Penalty Optimization set to ON(On). 17. (Optional) Activ ate the TCHF-TCHH handover optimization algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with F-H HO Load Band Optimization Allowed set to ON(On). b. Run the SET GCELLHOBASIC command withTCHF-TCHH HO Load Hysteresis set according to onsite requirements. c. Run the SET GCELLHOBASIC command with the following parameters set according to onsite requirements to ensure that the TCHF-TCHH handover quality threshold ranges from 0 to 70: AMR F-H HO Quality Thres. Fine Tune , Non-AMR F-H HO Quality Thres. Fine Tune , AMR H-F HO Quality Thres. Fine Tune, Non-AMR H-F HO Quality Thres. Fine Tune , AMR F-H Ho Qual. Threshold, AMR H-F Ho Qual. Threshold, Non-AMR F-H Ho Qual. Threshold, and Non-AMR H-F Ho Qual. Threshold . d. Run the SET GCELLHOBASIC command with the following parameters set according to onsite requirements to ensure that the TCHF-TCHH handover ATCB threshold ranges from –63 to 255: AMR F-H Ho ATCB Threshold , AMR H-F Ho ATCB Threshold , Non-AMR F-H Ho ATCB Threshold, and Non-AMR H-F Ho ATCB Threshold . 18. Activate the TCHF-TCHH handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with its parameters set as follows: Set AMR F-H Ho Allowed, Allow AMR H-F Quality-based HO, Non-AMR F-H Ho Allowed, and Allow Non-AMR H-F Quality-based HO to YES(Yes). Set the following parameters according to onsite requirements: Non-AMR F-H Traffic Threshold, F-H Ho Duration , F-H Ho Period, AMR F-H Ho Pathloss Adjust Step, AMR F-H Ho ATCB Adjust Step , AMR F-H Ho Pathloss Threshold, F-H Pathloss Offset Overlay, AMR F-H Ho ATCB Threshold , F-H ATCB Offset Overlay, AMR F-H Ho Qual. Threshold , F-H Ho Stat. Time, F-H Ho Last Time, AMR H-F Traffic Threshold, H-F Ho Duration , AMR H-F Ho ATCB Threshold , H-F ATCB Offset Overlay, Non-AMR H-F Ho Pathloss Threshold, H-F Pathloss Offset Overlay, Non-AMR H-F Ho Qual. Threshold , H-F Ho Stat. Time, H-F Ho Last Time, Non-AMR F-H Traffic Threshold, Non-AMR F-H Ho Pathloss Adjust Step , Non-AMR F-H Ho ATCB Adjust Step , Non-AMR F-H Ho Pathloss Threshold, Non-AMR F-H Ho ATCB Threshold , Non-AMR F-H Ho Qual. Threshold , Non-AMR H-F Traffic Threshold, Non-AMR H-F Ho ATCB Threshold, Non-AMR H-F Ho Pathloss Threshold , and Non-AMR H-F Ho Qual. Threshold . b. Run the SET GTRXDEV command withTCH Rate Adjust Allow set to YES(Yes). c. Run the SET GCELLCCACCESS command with at leastFULL_RATE_VER1(Full-rate VER 1), FULL_RATE_VER3(Full-rate VER 3), and HALF_RATE_VER3(Half-rate VER 3) selected underSpeech Version. d. Run the SET BSCBASIC command withA Interface Tag, Um Interface Tag, and Abis Interface Tag set to GSM_PHASE_2Plus. 19. Activate t he SDCCH handover algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with SDCCH HO Allowed set to YES(Yes). b. Run the SET GCELLHOCTRL command withInter-BSC SDCCH HO ALLowed set according to onsite requirements.
MML Examples
//Activating HUAWEI II Handover SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2; SET GCELLHOIUO: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, HOTRYCNT=3; //Activating the quick handover algorithm for the BSC6900 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=YES, CHAINNCELLTYPE=QUICK_HO_NCELL_TYPE_A, ADJHOOFFSET=1; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, QUICKHOEN=YES, QUICKPBGTHOEN=YES; SET GCELLHOFAST: IDTYPE=BYID, CELLID=0, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, SCELLFILTER=4, NCELLFILTER=4, IGNOREMRNUM=1, TIMEPUNISH=10, HOPUNISHVALUE=63, HOOFFSET=68, MSLEVSTRQPBGT=NO, HODIRFORECASTEN=YES, HODIRSTATIME=3, HODIRLASTTIME=2, AFCHOSTATTIME=4, AFCHOLASTTIME=3; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, FREQADJ=YES, DLFREQADJ=YES, FREQADJVALUE=36671; //Activating the quick handover algorithm for the BSC6910 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=YES, CHAINNCELLTYPE=QUICK_HO_NCELL_TYPE_A, ADJHOOFFSET=1; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, QUICKHOEN=YES, QUICKPBGTHOEN=YES; SET GCELLHOFAST: IDTYPE=BYID, CELLID=0, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, SCELLFILTER=4, NCELLFILTER=4, IGNOREMRNUM=1, TIMEPUNISH=10, HOPUNISHVALUE=63, HOOFFSET=68, MSLEVSTRQPBGT=NO, HODIRFORECASTEN=YES, HODIRSTATIME=3, HODIRLASTTIME=2, AFCHOSTATTIME=4, AFCHOLASTTIME=3; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, FREQADJ=YES, DLFREQADJ=YES, FREQADJVALUE=36671; //Activating the TA handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, TAHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, TALIMIT=125; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, SSTAPUNISH=40, TIMETAPUNISH=10; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, TASTATTIME=1, TALASTTIME=1; //Activating the TA handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, TAHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, TALIMIT=125; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, SSTAPUNISH=40, TIMETAPUNISH=10; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, TASTATTIME=1, TALASTTIME=1; //Activating the BQ handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, BQHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, DLQUALIMIT=55, ULQUALIMIT=60; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, SSBQPUNISH=63, TIMEBQPUNISH=10; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, BQSTATTIME=1, BQLASTTIME=1; //Activating the BQ handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, BQHOEN=YES; SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, DLQUALIMIT=55, ULQUALIMIT=60; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, SSBQPUNISH=63, TIMEBQPUNISH=10; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, BQSTATTIME=1, BQLASTTIME=1; //Activating the interference handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, INTRACELLHOEN=YES, INTERFHOEN=YES, HOTHRES=25,
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
45/201
16/7/2015
Handover Featur e Par am eter Descr iption
= , = ; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, BANTIME=20; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; SET GCELLAMRQUL: IDTYPE=BYID, CELLID=0, RXQUAL1=70, RXQUAL2=60, RXQUAL3=59, RXQUAL4=58, RXQUAL5=57, RXQUAL6=56, RXQUAL7=55, RXQUAL8=54, RXQUAL9=53, RXQUAL10=52, RXQUAL11=51, RXQUAL12=50; //Activating the interference handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, INTRACELLHOEN=YES, INTERFHOEN=YES, HOTHRES=25, INTERFERESTATTIME=3, INTERFERELASTTIME=2; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, BANTIME=20; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; SET GCELLAMRQUL: IDTYPE=BYID, CELLID=0, RXQUAL1=70, RXQUAL2=60, RXQUAL3=59, RXQUAL4=58, RXQUAL5=57, RXQUAL6=56, RXQUAL7=55, RXQUAL8=54, RXQUAL9=53, RXQUAL10=52, RXQUAL11=51, RXQUAL12=50; //Activating the no-DL-MR handover algorithm for the BSC6900 SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, NODLMRHOEN=YES, NODLMRHOQUALLIMIT=50, NODLMRHOALLOWLIMIT=8, NODLMRHOSTATTIME=1, NODLMRHOLASTTIME=1; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, DATAQUAFLTLEN=4, SIGQUAFLTLEN=2; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, ULBQSTATTIME=1, ULBQLASTTIME=1; //Activating the no-DL-MR handover algorithm for the BSC6910 SET GCELLHOEMG: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, NODLMRHOEN=YES, NODLMRHOQUALLIMIT=50, NODLMRHOALLOWLIMIT=8, NODLMRHOSTATTIME=1, NODLMRHOLASTTIME=1; SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, DATAQUAFLTLEN=4, SIGQUAFLTLEN=2; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, ULBQSTATTIME=1, ULBQLASTTIME=1; //Activating the enhanced dual-band network handover algorithm MOD GCELL: IDTYPE=BYID, CELLID=0, IUOTP=EDB_cell, CELLINEXTP=Inner, DBLFREQADJIDTYPE=BYID, DBLFREQADJCID=1; SET GCELLHOEDBPARA: IDTYPE=BYID, CELLID=0, OUTASSOPTEN=YES; //Activating the edge handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, FRINGEHOEN=YES, ULEDGETHRES=10, DLEDGETHRES=20, EDGESTAT1=6, EDGELAST1=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the edge handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, FRINGEHOEN=YES, ULEDGETHRES=10, DLEDGETHRES=20, EDGESTAT1=6, EDGELAST1=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, INTELEVHOHYST=67; //Activating the fast-moving micro cell handover algorithm for the BSC6900 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, QCKMVHOEN=YES, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, QCKSTATCNT=3, QCKTRUECNT=2, QCKTIMETH=15, SPEEDPUNISH=30, SPEEDPUNISHT=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM2, INTELEVHOHYST=67, HCSSTATTIME=3, HCSLASTTIME=2; //Activating the fast-moving micro cell handover algorithm for the BSC6910 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, LAYER=3; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, QCKMVHOEN=YES, HOTHRES=25; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, QCKSTATCNT=3, QCKTRUECNT=2, QCKTIMETH=15, SPEEDPUNISH=30, SPEEDPUNISHT=4; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM2, INTELEVHOHYST=67, HCSSTATTIME=3, HCSLASTTIME=2; //Activating the better-cell handover algorithm for the BSC6900 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, BETTERCELLHOEN=YES, PATHLOSSHOEN=YES; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM2, BETTERCELLSTATTIME=6, BETTERCELLLASTTIME=4; //Activating the better-cell handover algorithm for the BSC6910 SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, BETTERCELLHOEN=YES, PATHLOSSHOEN=YES; MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM2, BETTERCELLSTATTIME=6, BETTERCELLLASTTIME=4; //Activating the TCHF-TCHH handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, AMRFULLTOHALFHOALLOW=YES, AMRFULLTOHALFHOTHRESH=75, FULLTOHALFHODURATION=5, FULLTOHALFHOPERIOD=1, AMRFULLTOHALFHOPATHADJSTEP=1, AMRFULLTOHALFHOATCBADJSTEP=2, AMRFULLTOHALFHOPATHTHRESH=100, AMRFULLTOHALFHOPATHTHRESH=100, FULLTOHALFHOPATHOFFSET=10, FULLTOHALFHOPATHOFFSET=10, AMRFULLTOHALFHOAT AMRFULLTOHALFHOATCBTHRESH=20, CBTHRESH=20, FULLTOHALFHOATCBOFFSET=20, FULLTOHALFHOATCBOFFSET=20, AMRFULLTOHALFHOQUALTHRESH=0, AMRFULLTOHALFHOQUALTHRESH=0, FULLTOHALFHOSTATTIME=6, FULLTOHALFHOSTATTIME=6, FULLTOHALFHOLASTTIME=4, FULLTOHALFHOLASTTIME=4, AMRHALFTOFULLHOTHRESH=45, AMRHALFTOFULLHOTHRESH=45, AMRHALFTOFULLHOQUALALLOW=YES, AMRHALFTOFULLHOQUALALLOW=YES, HALFTOFULLHODURATION=5, HALFTOFULLHODURATION=5, AMRHALFTOFULLHOAT AMRHALFTOFULLHOATCBTHRESH=4, CBTHRESH=4, HALFTOFULLATCBOFFSET=20, HALFTOFULLATCBOFFSET=20, AMRHALFTOFULLHOPATHTHRESH=108, AMRHALFTOFULLHOPATHTHRESH=108, HALFTOFULLHOPATHOFFSET=10, HALFTOFULLHOPATHOFFSET=10, AMRHALFTOFULLHOQUALTHRESH=3, AMRHALFTOFULLHOQUALTHRESH=3, HALFTOFULLHOSTATTIME=6, HALFTOFULLHOSTATTIME=6, HALFTOFULLHOLASTTIME=4, NOAMRFULLTOHALFHOALLOW=YES, NOAMRFULLTOHALFTHRESH=85, NOAMRFULLTOHALFHOPATHADJSTEP=1, NOAMRFULLTOHALFHOATCBADJSTEP=2, NOAMRFULLTOHALFHOPATHTHRESH=95, NOAMRFULLTOHALFHOATCBTHRESH=30, NOAMRFULLTOHALFHOQUALTHRESH=0, NOAMRHALFTOFULLTHRESH=25, NOAMRHALFTOFULLHOQUALALLOW=YES, NOAMRHALFTOFULLHOATCBTHRESH=14, NOAMRHALFTOFULLHOPATHTHRESH=103, NOAMRHALFTOFULLHOQUALTHRESH=2; SET GTRXDEV: TRXID=0, TCHAJFLAG=YES; SET GCELLCCACCESS: IDTYPE=BYID, CELLID=0, VOICEVER=FULL_RATE_VER1-1&FULL_RATE_VER2-0&FULL_RATE_VER3-1&HALF_RATE_VER11&HALF_RATE_VER2-0&HALF_ 1&HALF_RATE_VER2-0&HALF_RATE_VER3-1&FULL RATE_VER3-1&FULL_RATE_VER5-0 _RATE_VER5-0;; SET BSCBASIC: AVer=GSM_PHASE_2Plus, UmVer=GSM_PHASE_2Plus, AbisVer=GSM_PHASE_2Plus; //Activating the load handover penalty inheritance algorithm SET GCELLHOFITPEN: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, LoadHoPunishInheritSwitch=ON; //Activating the TCHF-TCHH handover optimization algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, F2HHOLOADSTFSWITCH=ON; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, AMRFULLTOHALFHOATCBTHRESH=-63, AMRFULLTOHALFHOQUALTHRESH=6, AMRFULLTOHALFHOQUALTHRESH=6, AMRF2HHOQUALTHFINE=8; //Activating the SDCCH handover algorithm SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM2, SIGCHANHOEN=YES; SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, INRBSCSDHOEN=YES; Using the CME
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
46/20 46/2011
16/7/2015
Handover Featur e Par am eter Descr iption NOTE:
You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. When configuring the HUAWEI II Handover and AMR FR/HR Dynamic Adjustment features on the CME, you must perform a single configuration first, and then perform batch modifications if required. 1. Configure a single single object on the CME. (CME single configuration) configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-4. 6-4. For the method of performing the CME single configuration, see CME Single ConfigurationOperation Guidee. 2. (Optional) (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify modify objects, objects, such as BSCs, BTSs, cells, and TRXs, in batches, batches, click the icon on the CME configuration configuration interface interface to start the batch modification modification wizard. wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-4 Configuring parameters on the CME SN
MO
NE
Parameter Name
Parameter ID
Supports CME Batch Modification Center
1
GCELLHOBASI C
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
2
GCELLHOEMG
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
3
GCELLHOFITPEN
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
4
GCELLHOIUO
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Yes
5
GCELLHOAD
BSC6900/BSC6910
Max . Num. of HO Attempts
HOTRYCNT
Yes
6
GCELLCCCH
BSC6 BSC69900/B 00/BSC SC66910 910
PWRC PWRC
CANPC
Yes
BSC690 BSC6900/B 0/BSC6 SC691 9100
Power Power Contro Controll and and Handover CMP CON Sw
PCHOCMPCON
Yes
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
Inde Indexx Type Type
IDTYPE
No
NOTE:
Configure this MO if you need to improve the handover and power control performance when the BCCH TRX participates in baseband frequency hopping. 7
GCELLOTHEXT NOTE:
Configure this MO if you need to improve the handover and power control performance when the BCCH TRX participates in baseband frequency hopping. 8
9
G2GNCELL
NOTE:
Source Cell Index
Configure this MO to activate the quick handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is Ext ernal Cell
BSC690 BSC6900/B 0/BSC6 SC691 9100
Chain Chain Neigh Neighbo borr Cell Cell
ISNCELL
No
ISCHAINNCELL
No
NOTE:
Configure this MO to activate the quick handover algorithm. 10
G2GNCELL
Chain Neighbour Cell Type
NOTE:
Configure this MO to activate the quick handover algorithm. 11
GCELLHOBASI C
CHAINNCELLTYPE
Quick Handover Offset ADJHOOFFSET for Neighbor Cell BSC690 BSC6900/B 0/BSC6 SC691 9100
Quick Quick Hando Handover ver Enabl Enablee QUICKHOEN
Yes
NOTE:
Configure this MO to activate the quick handover algorithm. 12
GCELLHOBASI C
BSC6900/BSC6910
Quick PBGT Handover QUICKPBGTHOEN Enable
Yes
13
GCELLHOFAST
BSC690 BSC6900/B 0/BSC6 SC691 9100
Hando Handover ver Directi Direction on Forecast Enable
HODIRFORECASTEN
Yes
Quick Handover Up Trigger Level
HOUPTRIGE
Quick Handover Down Tri Tri er Level Level
HODOWNTRIGE
NOTE:
Configure this MO to activate the quick handover algorithm.
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
47/20 47/2011
16/7/2015
Handover Featur e Par am eter Descr iption Quick Move Speed Threshold
MOVESPEEDTHRES
Serving Cell Filter Length MR Number
SCELLFILTER
Neighbor Cell Filter Length MR Number
NCELLFILTER
Ignore Measurement Report Number
IGNOREMRNUM
Quick Handover Punish TIMEPUNISH Time Quick Handover Punish HOPUNISHVALUE Value Quick Handover Offset HOOFFSET Handover Direction Forecast Statistic Times
HODIRSTATIME
Handover Direction Forecast Last Times
HODIRLASTTIME
AFCHOSTATTIME Frequency Shift Handover Statistic Time
14
GCELLOTHEXT
Frequency Shift Handover Duration
AFCHOLASTTIME
Handover Direction Forecast Enable
MSLEVSTRQPBGT
UL Freq Freque uency ncy Adjust Adjust Switch
FREQADJ
DL Frequency Adjust Switch
DLFREQADJ
UL Frequency Adjust Value
FREQADJVALUE
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
TA HO Allow Allowed ed
TAHOEN
Yes
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
TA Thre Thresh shol oldd
TALIMIT
Yes
BSC690 BSC6900/B 0/BSC6 SC691 9100
Penalt Penaltyy Level Level after after TA HO
SSTAPUNISH
Yes
Penalty Time after TA HO
TIMETAPUNISH
Inde Indexx Type Type
IDTYPE
BSC690 BSC6900/B 0/BSC6 SC691 9100
Yes
NOTE:
Configure this MO to activate the quick handover algorithm. 15
GCELLHOBASI C
NOTE:
Configure this MO to activate the TA handover algorithm. 16
GCELLHOEMG
NOTE:
Configure this MO to activate the TA handover algorithm. 17
GCELLHOFITPEN NOTE:
Configure this MO to activate the TA handover algorithm. 18
19
G2GNCELL
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
NOTE:
Source Cell Index
Configure this MO to activate the TA handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is Ext ernal Cell
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
TA HO Watch Watch Time Time
ISNCELL
No
TASTATTIME
No
NOTE:
Configure this MO to activate the TA handover algorithm. 20
G2GNCELL
NOTE:
Configure this MO to activate the TA handover algorithm. 21
GCELLHOBASI C
TA HO Valid Time
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
BQ HO Allow Allowed ed
BSC690 BSC6900/B 0/BSC6 SC691 9100
DL Qual. Qual. Thre Thresho shold ld
TALASTTIME
BQHOEN
Yes
DLQUALIMIT
Yes
NOTE:
Configure this MO to activate the BQ handover algorithm. 22
GCELLHOEMG
NOTE:
Confi ure this this MO to
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
48/20 48/2011
16/7/2015
Handover Featur e Par am eter Descr iption activate the BQ handover algorithm.
23
GCELLAMRQUL
UL Qual. Threshold
BSC690 BSC6900/B 0/BSC6 SC691 9100
ULQUALIMIT
UL Qual. Qual. Limit Limit for AMR ULQUALIMITAMRFR FR
Yes
NOTE:
DL Qual. Limit for AMR DLQUALIMITAMRFR FR
Configure this MO to activate the BQ handover algorithm.
UL Qual. Limit for AMR ULQUALIMITAMRHR HR DL Qual. Limit for AMR DLQUALIMITAMRHR HR
24
GCELLHOFITPEN
BSC690 BSC6900/B 0/BSC6 SC691 9100
Penalt Penaltyy Level Level after after BQ HO
SSBQPUNISH
Penalty Time after BQ HO
TIMEBQPUNISH
Inde Indexx Type Type
IDTYPE
Yes
NOTE:
Configure this MO to activate the BQ handover algorithm. 25
26
G2GNCELL
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
NOTE:
Source Cell Index
Configure this MO to activate the BQ handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is Ext ernal Cell
BSC6 BSC690 900/ 0/BS BSC6 C691 9100
BQ HO Watch Watch Time Time BQSTATTIME
ISNCELL
No
NOTE:
Configure this MO to activate the BQ handover algorithm. 27
G2GNCELL
No
NOTE:
Configure this MO to activate the BQ handover algorithm. 28
GCELLHOBASI C
BQ HO Valid Time
BSC690 BSC6900/B 0/BSC6 SC691 9100
NOTE:
Interfe Interfere rence nce HO Allowed
BQLASTTIME
INTERFHOEN
Yes
Intracell HO Allowed INTRACELLHOEN
Configure this MO to activate the interference handover algorithm.
Inter-layer HO Threshold
HOTHRES
Interfere HO Static Time
INTERFERESTATTIME
Interfere HO Valid Time INTERFERELASTTIME 29
GCELLHOAD
BSC690 BSC6900/B 0/BSC6 SC691 9100
Forb Forbidd idden en time after after MAX Times
BANTIME
MAX Consecutive HO Times
MAXCNTNUM
Yes
NOTE:
Configure this MO to activate the interference handover algorithm. 30
31
G2GNCELL
Interval for Consecutive CONTINTV HO Jud. BSC6 BSC690 900/ 0/BS BSC6 C691 9100
Inde Indexx Type Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the interference handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is Ext ernal Cell
BSC690 BSC6900/B 0/BSC6 SC691 9100
Adjace Adjacent nt Cell Cell InterInter-laye layer r INTELEVHOHYST HO Hysteresis
No
BSC690 BSC6900/B 0/BSC6 SC691 9100
Interfe Interfere re HO Qual. Qual. Thresh 1 for Non-AMR FR
RXQUAL1
Yes
Interfere HO Qual. Thresh 2 for Non-AMR FR
RXQUAL2
Interfere HO Qual. Thresh 3 for Non-AMR
RXQUAL3
ISNCELL
No
NOTE:
Configure this MO to activate the interference handover algorithm. 32
G2GNCELL NOTE:
Configure this MO to activate the interference handover algorithm. 33
GCELLAMRQUL NOTE:
Configure this MO to activate the interference handover algorithm.
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
49/20 49/2011
16/7/2015
Handover Feature Parameter Description Interfere HO Qual. Thresh 4 for Non-AMR FR
RXQUAL4
Interfere HO Qual. Thresh 5 for Non-AMR FR
RXQUAL5
Interfere HO Qual. Thresh 6 for Non-AMR FR
RXQUAL6
Interfere HO Qual. Thresh 7 for Non-AMR FR
RXQUAL7
Interfere HO Qual. Thresh 8 for Non-AMR FR
RXQUAL8
Interfere HO Qual. Thresh 9 for Non-AMR FR
RXQUAL9
RXQUAL10 Interfere HO Qual. Thresh 10 for Non-AMR FR
Interfere HO Qual. RXQUAL11 Thresh 11 for Non-AMR FR RXQUAL12 Interfere HO Qual. Thresh 12 for Non-AMR FR
Interfere HO Qual. Thresh Offset for AMR FR 34
35
GCELLHOEMG
BSC6900/BSC6910
RXLEVOFF
No Dl Mr.HO Allowed NODLMRHOEN
NOTE:
UL Qual. Threshold
Configure this MO to activate the no-DL-MR handover algorithm.
Cons.No Dl Mr.HO Allowed Limit
NODLMRHOALLOWLIMIT
No Dl Mr. HO Statistic Time
NODLMRHOSTATTIME
No Dl Mr. HO Last Time
NODLMRHOLASTTIME
GCELLAMRQUL
BSC6900/BSC6910
Yes
ULQUALIMIT
UL Qual. Limit for AMR ULQUALIMITAMRFR FR
Yes
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm. 36
GCELLHOFITPEN
UL Qual. Limit for AMR ULQUALIMITAMRHR HR BSC6900/BSC6910
Filter Length for TCH Qual
DATAQUAFLTLEN
Filter Length for SDCCH Qual
SIGQUAFLTLEN
Yes
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm. 37
38
G2GNCELL
BSC6900/BSC6910
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the no-DL-MR handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
BSC6900/BSC6910
UL BQ HO Static Time ULBQSTATTIME
ISNCELL
No
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm. 39
G2GNCELL
No
NOTE:
Configure this MO to activate the no-DL-MR handover algorithm. 40
GCELL NOTE:
Configure this MO to activate the enhanced dual-band network handover algorithm.
UL BQ HO Last Time ULBQLASTTIME
BSC6900/BSC6910
Cell IUO Type
IUOTP
Cell Inner/Extra Property
CELLINEXTP
Same Group Cell Index Type
DBLFREQADJIDTYPE
Same Group Cell Index Type
DBLFREQADJIDTYPE
Yes
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
50/201
16/7/2015
Handover Feature Parameter Description Same Group Cell Index DBLFREQADJCID Same Group Cell Name DBLFREQADJCNAME
41
GCELLHOEDBPARA
BSC6900/BSC6910
NOTE:
Configure this MO to activate the enhanced dual-band network handover algorithm.
Load HO Allowed
OUTLOADHOENABLE
UL Subcell General Overload Threshold
OUTGENOVERLDTHRED
Inner Cell Serious OverLoad Thred
INNSERIOVERLDTHRED
Subcell HO Allowed Flow Control Level
EDBSYSFLOWLEV
Incoming OL Subcell HO Level TH
INTOINNREXLEVTHRED
UL Subcell Serious Overload Threshold
OUTSERIOVERLDTHRED
Yes
OUTLOADHOPERIOD UL Subcell Load Hierarchical HO Periods
MOD Step LEN of UL Load HO Period
OUTLOADHOMODPERI
Step Length of UL Subcell Load HO
OUTLOADHOSTEP
UL Subcell Lower Load Threshold
OUTLOWLOADTHRED
Subcell HO Allowed Flow Control Level
EDBSYSFLOWLEV
Outgoing OL Subcell HO Level TH
OUTINNREXLEVTHRED
OL Subcell Load Diversity HO Period
INNLOADHOPERI
Step Length of OL Subcell Load HO
INNLOADHOSTEP
ATCBTHRED Distance Between Boundaries of Subcells
Distance Hysteresis Between Boundaries 42
GCELLHOBASIC
BSC6900/BSC6910
NOTE:
Configure this MO to activate the edge handover algorithm.
43
44
G2GNCELL
BSC6900/BSC6910
Edge HO Allowed
ATCBHYST
FRINGEHOEN
Edge HO UL RX_LEV Threshold
ULEDGETHRES
Edge HO DL RX_LEV Threshold
DLEDGETHRES
Handover Algorithm II Edge HO Watch Time
EDGESTAT
Handover Algorithm II Edge HO Valid Time
EDGELAST
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the edge handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Inter-layer INTELEVHOHYST HO Hysteresis
ISNCELL
No
NOTE:
Configure this MO to activate the edge handover algorithm. 45
G2GNCELL NOTE:
Edge HO AdjCell Watch EDGEADJSTATTIME Time
Configure this MO to activate the edge handover algorithm. 46
GCELLHOBASIC
No
Edge HO AdjCell Valid Time
EDGEADJLASTTIME
BSC6900/BSC6910
Enhanced Outgoing Cell EDOUTHOADEN Handover Allowed
Yes
BSC6900/BSC6910
Index Type
No
NOTE:
Configure this MO to activate the edge handover algorithm. 47
G2GNCELL NOTE:
Configure this MO to activate the edge
Source Cell Index
IDTYPE
SRC2GNCELLID
Neighbor 2G Cell Index NBR2GNCELLID
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
51/201
16/7/2015
Handover Feature Parameter Description an over a gor m.
48
G2GNCELL
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
BSC6900/BSC6910
Enhanced Outgoing Cell EDOUTHOOFFSET Handover Offset
No
BSC6900/BSC6910
Layer of The Cell
LAYER
Yes
BSC6900/BSC6910
MS Fast Moving HO Allowed
QCKMVHOEN
Yes
Inter-layer HO Threshold
HOTHRES
ISNCELL
No
NOTE:
Configure this MO to activate the edge handover algorithm. 49
G2GNCELL NOTE:
Configure this MO to activate the edge handover algorithm. 50
GCELLBASICPARA
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 51
GCELLHOBASIC NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 52
GCELLHOAD
BSC6900/BSC6910
MS Fast-moving Watch QCKSTATCNT Cells
Yes
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm.
53
54
G2GNCELL
BSC6900/BSC6910
MS Fast-moving Valid Cells
QCKTRUECNT
MS Fast-moving Time Threshold
QCKTIMETH
Penalty on MS Fast Moving HO
SPEEDPUNISH
Penalty Time on Fast Moving HO
SPEEDPUNISHT
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the fast-moving micro cell handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
BSC6900/BSC6910
Adjacent Cell Inter-layer INTELEVHOHYST HO Hysteresis
ISNCELL
No
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 55
G2GNCELL NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 56
GCELLHOBASIC
HCS HO Watch Time HCSSTATTIME HCS HO Valid Time BSC6900/BSC6910
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm. 57
58
G2GNCELL
HCSLASTTIME
Better Cell Handover BETTERCELLHOEN Enable
Yes
Pathloss Ho. Enable PATHLOSSHOEN
BSC6900/BSC6910
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the fast-moving micro cell handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
ISNCELL
No
NOTE:
Configure this MO to activate the fast-moving micro cell handover algorithm.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
52/201
16/7/2015 59
Handover Feature Parameter Description G2GNCELL
BSC6900/BSC6910
NOTE:
Configure this MO to activate the better-cell handover algorithm. 60
GCELLHOBASIC
Better Cell HO Watch Time
BETTERCELLSTATTIME
Better Cell HO Valid Time
BETTERCELLLASTTIME
No
Enhanced Outgoing Cell EDOUTHOADEN Handover Allowed
NOTE:
Configure this MO to activate the better-cell handover algorithm. 61
62
G2GNCELL
BSC6900/BSC6910
Index Type
IDTYPE
NOTE:
Source Cell Index
Configure this MO to activate the better-cell handover algorithm.
Neighbor 2G Cell Index NBR2GNCELLID
G2GNCELL
No
SRC2GNCELLID
Neighboring Cell Type QUERYTYPE BSC6910
Is External Cell
BSC6900/BSC6910
Neighboring Cell Penalty Switch
ISNCELL
No
NCELLPUNEN
No
NOTE:
Configure this MO to activate the better-cell handover algorithm. 63
G2GNCELL NOTE:
Enhanced Outgoing Cell EDOUTHOOFFSET Handover Offset
Configure this MO to activate the better-cell handover algorithm.
Penalty Stop Level Threshold
NCELLPUNSTPTH
Penalty Timer Length NCELLPUNTM Level Penalty Value on Neighboring Cell 64
GCELLHOBASIC
BSC6900/BSC6910
NCELLPUNLEV
Load Handover Support LoadHoEn
Yes
Load HO Penalty Optimization
LoadHoPunishInheritSwitch
Yes
F-H HO Load Band Optimization Allowed
F2HHOLOADSTFSWITCH
TCHF-TCHH HO Load Hysteresis
FullToHalfHoLoadStf
AMR F-H HO Quality Thres. Fine Tune
AMRF2HHOQUALTHFINE
Non-AMR F-H HO Quality Thres. Fine Tune
NOAMRF2HHOQUALTHFINE
AMR H-F HO Quality Thres. Fine Tune
AMRH2FHOQUALFINE
Non-AMR H-F HO Quality Thres. Fine Tune
NOAMRHALFTOFULLHOQUALTHRESH
AMR F-H Ho Qual. Threshold
AMRFULLTOHALFHOQUALTHRESH
AMR H-F Ho Qual. Threshold
AMRHALFTOFULLHOQUALTHRESH
NOTE:
Configure this MO to activate the load handover penalty inheritance algorithm. 65
GCELLHOFITPEN
BSC6900/BSC6910
NOTE:
Configure this MO to activate the load handover penalty inheritance algorithm. GCELLHOBASIC NOTE:
Configure this MO to activate the TCHF-TCHH handover optimization algorithm.
Non-AMR F-H Ho Qual. NOAMRFULLTOHALFHOQUALTHRESH Threshold Non-AMR H-F Ho Qual. NOAMRHALFTOFULLHOQUALTHRESH Threshold AMR F-H Ho ATCB Threshold
AMRFULLTOHALFHOATCBTHRESH
AMR H-F Ho ATCB Threshold
AMRHALFTOFULLHOATCBTHRESH
Non-AMR F-H Ho ATCB Threshold
NOAMRFULLTOHALFHOATCBTHRESH
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
53/201
16/7/2015
Handover Feature Parameter Description Non-AMR H-F Ho ATCB Threshold
66
GCELLHOBASIC
BSC6900/BSC6910
NOAMRHALFTOFULLHOATCBTHRESH
AMR F-H Ho Allowed AMRFULLTOHALFHOALLOW
Yes
Allow AMR H-F Quality- AMRHALFTOFULLHOQUALALLOW based HO
NOTE:
Configure this MO to activate the TCHF-TCHH handover algorithm.
Non-AMR F-H Ho Allowed
NOAMRFULLTOHALFHOALLOW
Allow Non-AMR H-F Quality-based HO
NOAMRHALFTOFULLHOQUALALLOW
AMR F-H Traffic Threshold
AMRFULLTOHALFHOTHRESH
F-H Ho Duration F-H Ho Period
FULLTOHALFHODURATION
FULLTOHALFHOPERIOD
AMR F-H Ho Pathloss Adjust Step
AMRFULLTOHALFHOPATHADJSTEP
AMR F-H Ho ATCB Adjust Step
AMRFULLTOHALFHOATCBADJSTEP
AMR F-H Ho Pathloss Threshold
AMRFULLTOHALFHOPATHTHRESH
F-H Pathloss Offset Overlay
FULLTOHALFHOPATHOFFSET
AMR F-H Ho ATCB Threshold
AMRFULLTOHALFHOATCBTHRESH
F-H ATCB Offset Overlay
FULLTOHALFHOATCBOFFSET
AMR F-H Ho Qual. Threshold
AMRFULLTOHALFHOQUALTHRESH
F-H Ho Stat. Time
FULLTOHALFHOSTATTIME
F-H Ho Last Time
FULLTOHALFHOLASTTIME
AMR H-F Traffic Threshold H-F Ho Duration
AMRHALFTOFULLHOTHRESH
HALFTOFULLHODURATION
AMR H-F Ho ATCB Threshold
AMRHALFTOFULLHOATCBTHRESH
H-F ATCB Offset Overlay
HALFTOFULLATCBOFFSET
Non-AMR H-F Ho Pathloss Threshold
AMRHALFTOFULLHOPATHTHRESH
H-F Pathloss Offset Overlay
HALFTOFULLHOPATHOFFSET
Non-AMR H-F Ho Qual. AMRHALFTOFULLHOQUALTHRESH Threshold H-F Ho Stat. Time
HALFTOFULLHOSTATTIME
H-F Ho Last Time
HALFTOFULLHOLASTTIME
Non-AMR F-H Traffic Threshold
NOAMRFULLTOHALFTHRESH
Non-AMR F-H Ho Pathloss Adjust Step
NOAMRFULLTOHALFHOPATHADJSTEP
Non-AMR F-H Ho ATCB Adjust Step
NOAMRFULLTOHALFHOATCBADJSTEP
Non-AMR F-H Ho Pathloss Threshold
NOAMRFULLTOHALFHOPATHTHRESH
Non-AMR F-H Ho ATCB Threshold
NOAMRFULLTOHALFHOATCBTHRESH
Non-AMR F-H Ho Qual. NOAMRFULLTOHALFHOQUALTHRESH Threshold Non-AMR H-F Traffic Threshold
NOAMRHALFTOFULLTHRESH
Non-AMR H-F Ho ATCB Threshold
NOAMRHALFTOFULLHOATCBTHRESH
Non-AMR H-F Ho Pathloss Threshold
NOAMRHALFTOFULLHOPATHTHRESH
Non-AMR H-F Ho Qual. NOAMRHALFTOFULLHOQUALTHRESH Threshold 67
GTRXDEV
BSC6900/BSC6910
TCH Rate Adjust Allow TCHAJFLAG
Yes
NOTE:
Configure this MO to activate the TCHF-TCHH
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
54/201
16/7/2015
Handover Feature Parameter Description an over a gor m.
68
GCELLCCACCESS
BSC6900/BSC6910
Speech Version
VOICEVER
Yes
BSC6900/BSC6910
A Interface Tag
Aver
Yes
NOTE:
Configure this MO to activate the TCHF-TCHH handover algorithm. 69
BSCBASIC NOTE:
Configure this MO to activate the TCHF-TCHH handover algorithm. 70
GCELLHOBASIC
Abis Interface Tag
AbisVer
Um Interface Tag
UmVer
BSC6900/BSC6910
SDCCH HO Allowed SIGCHANHOEN
Yes
BSC6900/BSC6910
Inter-BSC SDCCH HO ALLowed
Yes
NOTE:
Configure this MO to activate the SDCCH handover algorithm. 71
GCELLHOCTRL NOTE:
INRBSCSDHOEN
Configure this MO to activate the SDCCH handover algorithm. 6.5.4 Activation Observation
On the BSC LMT, perform the following steps: 1. Run the LST GCELLHOBASIC command to query the value of Current HO Control Algorithm . Expected result: The value of Current HO Control Algorithm is Handover algorithm II. 2. Trace BSSAP messages over the A interface. Expected result: The BSC sends a Handover Performed message to the MSC. The cause value contained in the Handover Performed message varies depending on the handover type. The following table lists the cause value for each handover type. Handover Type
Cause Value
Quick handover
better-cell
TA handover
distance
BQ handover
uplink-quality or downlink-quality
Interference handover
uplink-quality or downlink-quality
H andov er due t o no dow nl ink meas urement report
upl ink -quali ty
Enhanced dual-band network handover
better-cell or traffic
Load handover
traffic
Edge handover
uplink-strength or downlink-strength
Fast-moving micro cell handover
better-cell
Better-cell handover
better-cell
TCHF-TCHH handover
downlink-quality
SDCCH handover
better-cell, distance, uplink-quality, downlink-quality, traffic, uplink-strength, or downlink-strength
3. (Optional) Verify the load handover penalty inheritance algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with Load Handover Support set to YES(Yes) for cell A. b. Run the SET GCELLHOFITPEN command withLoad HO Penalty Optimization set to ON(On) for cell A. Ensure that a load handover is performed from cell C to cell B, then to cell A. c. Run the SET GCELLHOAD command with the following parameters set to appropriate values for cell A to ensure that the conditions for triggering a load handover from cell A to cell C are met: Load HO Threshold, Load handover Load Accept Threshold, Load HO Bandwidth, and Load HO Step Level. Expected result: A load handover from cell A to cell C is not triggered. 4. (Optional) Verify the TCHF-TCHH handover optimization algorithm by performing the following steps: a. Run the SET GCELLHOBASIC command with all the following parameters set to YES(Yes): AMR F-H H o Allowed, Allow AMR H-F Quality-based HO, Non-AMR F-H Ho Allowed, and Allow Non-AMR H-F Quality-based HO. b. Run the SET GCELLHOBASIC command withF-H HO Load Band Optimization Allowed set to ON(On). c. Run the SET GCELLHOBASIC command withAMR F-H Traffic Threshold andTCHF-TCHH HO Load Hysteresis set according to onsite requirements for cell A. Ensure that the following condition is met after some AMR FR calls are converted into AMR HR calls in the cell: Cell load < AMR F-H Traffic Threshold –TCHF-TCHH HO Load Hysteresis Expected result: Only some AMR FR calls support TCHF-to-TCHH handovers. d. Run the SET GCELLHOBASIC command withNon-AMR H-F Ho ATCB Threshold set to –10. Expected result: Only the AMR HR calls whose ATCB values are less than or equal to –10 support TCHH-to-TCHF handovers. e. Run the SET GCELLHOBASIC command withNon-AMR H-F Ho Qual. Threshold set to 3 andNon-AMR H-F HO Quality Thres. Fine Tune set to 9. Expected result: Only the AMR HR calls whose TCHF-TCHH handover quality thresholds exceed 39 support TCHH-to-TCHF handovers
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
55/201
16/7/2015
Handover Feature Parameter Description
. .
e ac v a o n
Using the LMT
On the BSC LMT, run the SET GCELLHOBASIC command withCurrent HO Control Algorithm set toHOALGORITHM1(Handover algorithm I). MML Examples
//Deactivating HUAWEI II Handover SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; Using the CME NOTE:
When configuring the HUAWEI II Handover and AMR FR/HR Dynamic Adjustment features on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-5. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-5 Configuring the parameter on the CME SN
MO
NE
Parameter Name
Parameter ID
1
GCELLHOBASIC
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
Supports CME Batch Modification Center Yes
6.6 Deploying Direct Retry 6.6.1 Deployment Requirements Table 6-6 Deployment requirements Aspect
Requirement
Related feat ures
See c hapt er 4 Related Features.
BSC
None
BTS
None
GSM networking
None
MS
None
MSC
None
License
None
Others
None
6.6.2 Feature Activation Using the LMT
On the BSC LMT, perform the following steps: 1. Run the SET GCELLBASICPARA command withDirected Retry set to YES(Yes). 2. Run the SET GCELLCCBASIC command withDirected Retry Load Access Threshold set according to the actual load of candidate neighboring cells. 3. Run the SET GCELLHOBASIC command withCurrent HO Control Algorithm set to an appropriate value. 4. If Current HO Control Algorithm is set to HOALGORITHM1(Handover algorithm I), run the SET GCELLHOCTRL command withMin Power Level For Directed Retry set according to the actual receive level of neighboring cells. 5. If Current HO Control Algorithm is set to HOALGORITHM2(Handover algorithm I I), run the ADD G2GNCELL command with cells 0 and 1 set to neighboring GSM cells. Then, set Inter-cell HO Hysteresis andDirected Retry Handover Level Range for cell 1 according to onsite requirements. If a BSC6910 is used, set Is External Cell. 6. (Optional) Set the number of cells for directed retry and the priorities of these cells. a. Run the SET GCELLOTHEXT command with DRD H O Target Cell Selection Optimized set to YES(Yes). b. Run the SET GCELLHOAD command withMax. Num. of HO Attempts set according to network plan. MML Examples
//Activating Direct Retry for the BSC6900 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, DIRECTRYEN=YES; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, DRTAGCELLSEL=YES; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, HOTRYCNT=3; SET GCELLCCBASIC: IDTYPE=BYID, CELLID=0, DTLOADTHRED=85; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, MINPWRLEVDIRTRY=16; ADD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH= HOALGORITHM1; //Activating Direct Retry for the BSC6910 SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, DIRECTRYEN=YES; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=0, DRTAGCELLSEL=YES; SET GCELLHOAD: IDTYPE=BYID, CELLID=0, HOTRYCNT=3;
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
56/201
16/7/2015
Handover Feature Parameter Description
: = , = , = ; SET GCELLHOBASIC: IDTYPE=BYID, CELLID=0, HOCTRLSWITCH=HOALGORITHM1; SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, MINPWRLEVDIRTRY=16; ADD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=0, NBR2GNCELLID=1, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM1; Using the CME NOTE:
When configuring the Direct Retry feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-7. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-7 Configuring parameters on the CME SN
MO
NE
Parameter Name
1
GCELLBASICPARA
BSC6900/BSC6910
Directed Retry
2
GCELLCCBASIC
BSC6900/BSC6910
3
GCELLHOCTRL
Parameter ID
Supports CME Batch Modification Center
DIRECTRYEN
Yes
Directed Retry Load Access Threshold
DTLOADTHRED
Yes
BSC6900/BSC6910
Current HO Control Algorithm
HOCTRLSWITCH
BSC6900/BSC6910
Min Power Level For Directed Retry
MINPWRLEVDIRTRY
BSC6900/BSC6910
Inter-cell HO Hysteresis INTERCELLHYST
NOTE:
Yes
Configure this MO if Current HO Control Algorithm is set to HOALGORITHM1(Handover algorithm I)
4
G2GNCELL NOTE:
Directed Retry Handover DRHOLEVRANGE Level Range
Configure this MO if Current HO Control Algorithm is set to HOALGORITHM2(Handover BSC6910 algorithm II).
5
GCELLOTHEXT
No
Is External Cell
ISNCELL
BSC6900/BSC6910
DRD HO Target Cell Selection Optimized
DRTAGCELLSEL
Yes
BSC6900/BSC6910
Max. Num. of HO Attempts
HOTRYCNT
Yes
NOTE:
Configure this MO to set the number of cells for directed retry and the priorities of these cells. 6
GCELLHOAD NOTE:
Configure this MO to set the number of cells for directed retry and the priorities of these cells. 6.6.3 Activation Observation
On the BSC LMT, perform the following steps: 1. Block all TCHs in c ell 0. Meanwhile, ensure that the SDCCH in cell 0 is available. 2. Trace BSSAP messages over the A interface and RSL messages over the Abis interface in cells 0 and 1. 3. Use an MS to initiate a call in cell 0. 4. View the BSSAP messages traced over the A interface and RSL messages traced over the Abis interface in cells 0 and 1. Expected result: The call has been set up and the voice quality is good. A Handover Detection message is traced over the Abis interface and an Assignment Complete message is traced over the A interface in cell 1. Open the Single User CS Trace tab page. The results show that the value of the ucHoCause information element (IE) in the Handover Triggered Indication message is "directed-retry" 6.6.4 Deactivation Using the LMT
On the BSC LMT, run the SET GCELLBASICPARA command withDirected Retry set toNO(No). MML Examples
//Deactivating Direct Retry SET GCELLBASICPARA: IDTYPE=BYID, CELLID=0, DIRECTRYEN=NO; Using the CME
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
57/201
16/7/2015
Handover Feature Parameter Description NOTE:
When configuring the Direct Retry feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-8. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-8 Configuring the parameter on the CME SN
MO
NE
Parameter Name
1
GCELLBASICPARA
BSC6900/BSC6910
Directed Retry
Parameter ID
Supports CME Batch Modification Center
DIRECTRYEN
Yes
6.7 Deploying Pre-processing o f Measurement Report 6.7.1 Deployment Requirements Table 6-9 Deployment requirements Aspect
Requirement
Related feat ures
See c hapt er 4 Related Features.
BSC
None
BTS
The BTS supports this feature.
GSM networking
None
MS
None
MSC
None
License
None
Others
None
6.7.2 Feature Activation Using the LMT
On the BSC LMT, run the SET GCELLHOCTRL command with its parameters set as follows: Set MR.Preprocessing toBTS_Preprocessing(BTS preprocessing). Set Transfer Original MR, Transfer BTS/MS Power Class, and Sent Freq.of preprocessed MR according to network plan. MML Examples
//Activating Pre-processing of Measurement Report SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, BTSMESRPTPREPROC=BTS_Preprocessing, PRIMMESPPT=NO, BSMSPWRLEV=YES, MRPREPROCFREQ=Once_ps; Using the CME NOTE:
When configuring the Pre-processing of Measurement Report feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-10. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-10 Configuring parameters on the CME SN
MO
NE
Parameter Name
1
GCELLHOCTRL
BSC6900/BSC6910
MR.Preprocessing Transfer Original MR
Parameter ID
Supports CME Batch Modification Center
BTSMESRPTPREPROC
Yes
PRIMMESPPT
Transfer BTS/MS Power Class
BSMSPWRLEV
Sent Freq.of preprocessed MR
MRPREPROCFREQ
6.7.3 Activation Observation
On the BSC LMT, perform the following steps: 1. Trace RSL messages over the Abis interface. For details, see section "Tracing CS Domain RSL Messages on the Abis Interface" in BSC6900 LMT User Guide or BSC6910 LMT User Guide.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
58/201
16/7/2015
Handover Feature Parameter Description .
se an
o ca a xe - ne p one n e es ce .
3. Check whether the Preprocessed Measurement Result message is displayed in the trace window. If so, this feature has been activated. 6.7.4 Deactivation Using the LMT
On the BSC LMT, run the SET GCELLHOCTRL command withMR.Preprocessing set to BSC_Preprocessing(BSC preprocessing). MML Examples
//Deactivating Pre-processing of Measurement Report SET GCELLHOCTRL: IDTYPE=BYID, CELLID=0, BTSMESRPTPREPROC=BSC_Preprocessing; Using the CME NOTE:
When configuring the Pre-processing of Measurement Report feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-11. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-11 Configuring the parameter on the CME SN
MO
NE
Parameter Name
1
GCELLHOCTRL
BSC6900/BSC6910
MR.Preprocessing
Parameter ID
Supports CME Batch Modification Center
BTSMESRPTPREPROC
Yes
6.8 Deploying Fast Move Handover 6.8.1 Deployment Requirements Table 6-12 Deployment requirements Aspect
Requirement
Related features
See chapter 4 Related Features.
BSC
None
BTS
BTSs other than the BTS3900B and BTS3900E are used.
GSM networking
None
MS
None
MSC
None
License
The license controlling this feature has been activated. For details on how to activate the license, see License Management Feature Parameter Description. For details about license items, see License Control Item Description.
Others
None
6.8.2 Feature Activation Using the LMT
On the BSC LMT, perform the following steps: 1. Run the SET GCELLHOBASIC command with bothQuick Handover Enable andQuick PBGT Handover Enable set to YES(Yes). 2. Run the SET GCELLHOFAST command with the following parameters set according to onsite requirements:Quick Move Speed Threshold, Quick Handover Up Trigger Level, Quick Handover Down Trigger Level, Quick Handover Offset, Quick Handover Punish Time, Quick Handover Punish Value, Serving Cell Filter Length MR Number , Neighbor Cell Filter Length MR Number , Ignore Measurement Report Number , EN Quick PBGT HO ALG When MS Leaves BTS, Handover Direction Forecast Enable, Handover Direction Forecast Statistic Times, Frequency Shift Handover Statistic Time, and Frequency Shift Handover Duration. NOTE:
Run the LST G2GNCELL command to query information about neighboring GSM cells. If a cell is configured with external neighboring GSM cells, run the MOD GEXT2GCELL command withQuick Handover Offset, Quick Handover Punish Time, and Quick Handover Punish Value setaccording to onsite requirements. 3. Run the SET GCELLOTHEXT command withUL Frequency Adjust Switch andUL Frequency Adjust Value set according to onsite requirements. MML Examples
//Activating Fast Move Handover SET GCELLHOBASIC: IDTYPE=BYID, CELLID=1024, QUICKHOEN=YES, QUICKPBGTHOEN=YES; SET GCELLHOFAST: IDTYPE=BYID, CELLID=1024, HOUPTRIGE=50, HODOWNTRIGE=50, MOVESPEEDTHRES=35, MSLEVSTRQPBGT=YES; SET GCELLOTHEXT: IDTYPE=BYID, CELLID=1024, FREQADJ=YES, FREQADJVALUE=255; Using the CME NOTE:
When configuring the Fast Move Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
59/201
16/7/2015
Handover Feature Parameter Description
parame er se ng n er ace. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-13. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-13 Configuring parameters on the CME SN
MO
NE
Parameter Name
Parameter ID
1
GCELLHOBASIC
BSC6900/BSC6910
Quick Handover Enable QUICKHOEN Quick PBGT Handover Enable
2
GCELLHOFAST
BSC6900/BSC6910
Yes
QUICKPBGTHOEN
Quick Handover Up Trigger HOUPTRIGE Level Quick Handover Down Trigger Level Quick Handover Offset
Supports CME Batch Modification Center
Yes
HODOWNTRIGE
HOOFFSET
Quick Handover Punish Time
TIMEPUNISH
Quick Handover Punish Value
HOPUNISHVALUE
Serving Cell Filter Length MR Number
SCELLFILTER
Neighbor Cell Filter Length MR Number
NCELLFILTER
Ignore Measurement Report IGNOREMRNUM Number EN Quick PBGT HO ALG When MS Leaves BTS
MSLEVSTRQPBGT
Handover Direction Forecast Enable
HODIRFORECASTEN
Handover Direction Forecast Statistic Times
HODIRSTATIME
Frequency Shift Handover AFCHOSTATTIME Statistic Time Frequency Shift Handover AFCHOLASTTIME Duration 3
GCELLOTHEXT
BSC6900/BSC6910
UL Frequency Adjust Switch
FREQADJ
Yes
UL Frequency Adjust Value FREQADJVALUE 6.8.3 Activation Observation
On the BSC LMT, perform the following steps: 1. Move an MS away from the serving cell at a speed greater than Quick Move Speed Threshold until the frequency offset in the measurement report, CH RQD, or HO DETECT message is a negative value. If the frequency offset information fails to be reported or the frequency offset information is invalid, the uplink level in the serving cell is lower than Quick Handover Up Trigger Level , the downlink level in the serving cell is lower than Quick Handover Down Trigger Level , and the path loss of chain neighboring cells is lower than the path loss of the serving cell minus the sum of Quick Handover Offset andQuick Handover Offset for Neighbor Cell.
2. Trace BSSAP messages over the A interface. Expected result: The BSC sends a Handover Performed message to the MSC, with the cause value "better-cell". 6.8.4 Deactivation Using the LMT
On the BSC LMT, run the SET GCELLHOBASIC command withQuick PBGT Handover Enable set to NO(No). NOTE:
Quick handovers consist of fast move handovers and frequency offset handovers. Quick Handover Enable controls whether to allow fast move handovers and frequency offset handovers. In this step, you can also deactivate the fast move handover by setting Quick Handover Enable toNO(No), but the frequency offset handover is deactivated at the same time. MML Examples
//Deactivating Fast Move Handover SET GCELLHOBASIC: IDTYPE=BYID, CELLID=1024, QUICKPBGTHOEN=NO; Using the CME NOTE:
When configuring the Fast Move Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
60/201
16/7/2015
Handover Feature Parameter Description e parame ers on e con gura on n er ace accor ng o e opera on sequence escr e n a e configuration, see CME Single Configuration Operation Guide.
. or e me o o per orm ng e
s nge
2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-14 Configuring the parameter on the CME SN
MO
NE
Parameter Name
Parameter ID
Supports CME Batch Modification Center
1
GCELLHOBASIC
BSC6900/BSC6910
Quick PBGT Handover Enable
QUICKPBGTHOEN
Yes
6.9 Deploying Chain Cell Handover 6.9.1 Deployment Requirements Table 6-15 Deployment requirements Aspect
Requirement
Related features
See chapter 4 Related Features.
BSC
None
BTS
None
GSM networking
None
MS
None
MSC
None
License
The license controlling this feature has been activated. For details on how to activate the license, see License Management Feature Parameter Description. For details about license items, see License Control Item Description.
Others
None
6.9.2 Feature Activation Using the LMT
On the BSC LMT, run the ADD G2GNCELL command withChain Neighbor Cell set to YES(Yes). If a cell has been added as a neighboring GSM cell, run the MOD G2GNCELL command with Neighboring Cell Type set to HANDOVERNCELL(Handover Neighboring cell) andChain Neighbor Cell set to YES(Yes). MML Examples
//Activating Chain Cell Handover ADD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=1024, NBR2GNCELLID=2542, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, SRCHOCTRLSWITCH=HOALGORITHM1, Using the CME NOTE:
When configuring the Chain Cell Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-16. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-16 Configuring the parameter on the CME SN
MO
NE
Parameter Name
Parameter ID
Supports CME Batch Modification Center
1
GCELLOTHBASIC
BSC6900/BSC6910
Power Boost before HO Enabled or Not
HOPOWERBOOST
No
6.9.3 Activation Observation On the BSC LMT, run the LST G2GNCELL command to query the value of Chain Neighbor Cell. Expected result: The value of Chain Neighbor Cell is Yes. 6.9.4 Deactivation Using the LMT
On the BSC LMT, run the MOD G2GNCELL command withChain Neighbor Cell set to NO(No). MML Examples
//Deactivating Chain Cell Handover for the BSC6900 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=1024, NBR2GNCELLID=2542, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=NO; //Deactivating Chain Cell Handover for the BSC6910 MOD G2GNCELL: IDTYPE=BYID, SRC2GNCELLID=1024, NBR2GNCELLID=2542, ISNCELL=INNCELL, NCELLTYPE=HANDOVERNCELL, ISCHAINNCELL=NO; Using the CME
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
61/201
16/7/2015
Handover Feature Parameter Description NOTE:
When configuring the Chain Cell Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-17. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-17 Configuring the parameter on the CME SN
MO
NE
Parameter Name
1
G2GNCELL
BSC6900/BSC6910
Chain Cell Handover
Parameter ID
ISCHAINNCELL
Supports CME Batch Modification Center
No
6.10 Deploying BTS power lift for handover 6.10.1 Deployment Requirements Table 6-18 Deployment requirements
Aspect
Requirement
Related features
See chapter 4 Related Features.
BSC
None
BTS
None
GSM networking
None
MS
None
MSC
None
License
The license controlling this feature has been activated. For details on how to activate the license, see License Management Feature Parameter Description. For details about license items, see License Control Item Description.
Others
None
6.10.2 Feature Activation Using the LMT
On the BSC LMT, run the SET GCELLOTHBASIC command withPower Boost before HO Enabled or Not set to YES(StartUp). MML Examples
//Activating BTS power lift for handover SET GCELLOTHBASIC: IDTYPE=BYID, CELLID=0, HOPOWERBOOST=YES; Using the CME NOTE:
When configuring the Chain Cell Handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-19. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-19 Configuring parameters on the CME SN
MO
NE
Parameter Name
1
GCELLOTHBASIC
BSC6900/BSC6910
Chain Neighbor Cell
Neighboring Cell Type Chain Neighbor Cell
Parameter ID
Supports CME Batch Modification Center
ISCHAINNCELL
Yes
NCELLTYPE ISCHAINNCELL
6.10.3 Activation Observation
On the BSC LMT, run the LST GCELLOTHBASIC command to query the value of Power Boost before HO Enabled or Not. Expected result: The value of Power Boost before HO Enabled or Not is StartUp. 6.10.4 Deactivation Using the LMT
On the BSC LMT, run the SET GCELLOTHBASIC command withPower Boost before HO Enabled or Not set to NO(Not StartUp). MML Examples
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
62/201
16/7/2015
Handover Feature Parameter Description
eac va ng power or an over SET GCELLOTHBASIC: IDTYPE=BYID, CELLID=0, HOPOWERBOOST=NO; Using the CME NOTE:
When configuring the BTS power lift for handover feature on the CME, you must perform a single configuration first, and then perform batch modifications if required. You must perform a single configuration for a parameter before batch modifications of the parameter. You are advised to perform batch modifications before logging out of the parameter setting interface. 1. Configure a single object on the CME. (CME single configuration) Set parameters on the CME configuration interface according to the operation sequence described in Table 6-20. For the method of performing the CME single configuration, see CME Single Configuration Operation Guide. 2. (Optional) Modify objects in batches on the CME. (CME batch modification center) To modify objects, such as BSCs, BTSs, cells, and TRXs, in batches, click the icon on the CME configuration interface to start the batch modification wizard. For the method of performing batch modifications through the CME batch modification center, press F1 on the wizard interface to obtain online help. Table 6-20 Configuring the parameter on the CME SN
MO
NE
Parameter Name
Parameter ID
Supports CME Batch Modification Center
1
GCELLOTHBASIC
BSC6900/BSC6910
Power Boost before HO Enabled or Not
HOPOWERBOOST
Yes
7 Parameters Table 7-1 Parameter description Parameter ID
NE
BTSMESRPTPREPROC
MML Command
Feature Feature Name Description ID
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- Pre-processing Meaning:Whether to enable the BTS to preprocess measurement 110802 of reports. This parameter determines where to conduct power cont Measurement GUI Value Range:BSC_Preprocessing(BSC preprocessing), Report BTS_Preprocessing(BTS preprocessing) Unit:None Actual Value Range:BSC_Preprocessing, BTS_Preprocessing Default Value:BSC_Preprocessing(BSC preprocessing)
PRIMMESPPT
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- Pre-processing Meaning:Whether the BTSs s end the original measurement repor 110802 of the BSC after pre-processing them. When this parameter is set t Measurement YES, the BTSs send the original and pre-processed measuremen Report reports to the BSC. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSMSPWRLEV
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- Pre-processing Meaning:Whether to enable the BTS to transfer BTS/MS power c 110802 of to the BSC Measurement GUI Value Range:NO(No), YES(Yes) Report Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
MRPREPROCFREQ
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- Pre-processing Meaning:Frequency at which the BTSs submit pre-processed 110802 of measurement reports to the BSC Measurement GUI Value Range:NOreport(Do not report), Twice_ps(Twice ever Report second), Once_ps(Once every second), Once_2s(Once every tw second), Once_4s(Once every four second) Unit:None Actual Value Range:NOreport, Twice_ps, Once_ps, Once_2s, Once_4s Default Value:Twice_ps(Twice every second)
MEASURETYPE
BSC6900/BSC6910 SET GBFD- Enhanced Meaning:Type of the measurement report (MR) reported by the M GCELLCCUTRANSYS 117501 Measurement GUI Value Range:EnhMeasReport(Enhanced Measurement Rep GBFD- Report (EMR) ComMeasReport(Common Measurement Report) 110801 Processing of Unit:None GBFD- Measurement Actual Value Range:EnhMeasReport, ComMeasReport 110802 Report Default Value:ComMeasReport(Common Measurement Report) Pre-processing of Measurement Report
MRMISSCOUNT
BSC6900/BSC6910 SET GCELLHOFITPEN
HUAWEI I Handover HUAWEI II Handover
Meaning:Allowed number of measurement reports lost consecuti during interpolation. If the number of measurement reports lost consecutively is less than the value of this parameter, linear interpolation is performed for the values in the lost measurement reports based on the values in the two measurement reports follo and followed by the lost measurement reports. If the number of measurement reports lost consecutively is greater than or equal t value of this parameter, all measurement reports before the lost measurement reports will be discarded, and the relevant filtering values will be recalculated when new measurement reports are received. GUI Value Range:0~31 Unit:None Actual Value Range:0~31 Default Value:4
MrIntrplOptSwitch
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I
Meaning:Whether to enable measurement report (MR) interpolatio
GBFD110601 GBFD510501
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
63/201
16/7/2015
POWL
Handover Feature Parameter Description
BSC6900/BSC6910 SET GTRXDEV
NSIGSTRFLTLEN
SSLENSD
QLENSI
DATAQUAFLTLEN
TAFLTLEN
TASIGSTRFLTLEN
NCELLFLTLEN
BSC6900/BSC6910 SET GCELLHOFITPEN
an over GBFD- HUAWEI II 510501 Handover
op mza on w en s are os . s parame er s e ec ve or handover algorithms I and II. If this parameter is set to YES for t BSC where handover algorithm I is used, the interpolation mode neighboring cells is changed to linear interpolation. If this parame set to YES for the BSC where handover algorithm II is used, the interpolation mode of the serving cell and the neighboring cells is changed to linear interpolation. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
MRFD- Configuration 210301 Management
Meaning:This parameter specifies the transmit power level of the TRX. The larger the value of this parameter, the smaller the trans power. When this parameter is set to "0", the transmit power lev the TRX is the greatest. Each time this parameter increases by o level, the transmit power reduces by 2 dB. For different types of BTSs, the value range of this parameter is different. BTS3X: 0-1 BTS3001C: 0-13 BTS3002C: 0-10 Double-transceiver BTSs (BTS3012,BTS3012AE,BTS3006C): 0-10 DBS3900 GSM, BTS3 GSM, BTS3900A GSM: 0-10. BTS3900B:0-12. GUI Value Range:0~13 Unit:None Actual Value Range:0~13 Default Value:0
GBFD110601 GBFD510501
Meaning:For the purpose of accurately reflecting the radio enviro of a network, filtering is performed on the measured values in se consecutive measurement reports. This parameter indicates the number of measurement reports received on signaling channels u for the filtering of neighboring cell signal strength. GUI Value Range:1~31 Unit:470ms/480ms Actual Value Range:TCH:480~14880; SDCCH:470~14570 Default Value:2
HUAWEI I Handover HUAWEI II Handover
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- Enhanced 111005 Channel Assignment Algorithm
Meaning:When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of successive measurement reports that are used to determine the signal streng traffic/data channels. This parameter is used to determine wheth interferences exist on channels. GUI Value Range:1~32 Unit:480ms Actual Value Range:480~15360 Default Value:6
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- Enhanced 111005 Channel Assignment Algorithm
Meaning:For the purpose of accurately reflecting the radio enviro of a network, filtering is performed on the measured values in se consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of the signal quality on signaling channels. This parameter is used to determin whether interferences exist on channels. GUI Value Range:1~32 Unit:470ms/480ms Actual Value Range:TCH:480~15360; SDCCH:470~15040 Default Value:2
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Number of measurement reports sampled for averaging signal quality on a speech or data channel. Averaging the signal quality in multiple measurement reports helps to prevent sharp deterioration of the signal quality due to Rayleigh fading and to e a comprehensive handover decision. GUI Value Range:1~31 Unit:480ms Actual Value Range:480~14880 Default Value:4
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for filtering the TA on TCHs. GUI Value Range:1~31 Unit:470ms/480ms Actual Value Range:TCH:480~14880; SDCCH:470~14570 Default Value:4
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:When the network receives measurement reports, the measurement values in several straight measurement reports are filtered to reflect the radio operating environment for the sake of accuracy. This parameter specifies the number of measurement reports sampled for filtering the TA on the signaling channel. GUI Value Range:1~31 Unit:470ms/480ms Actual Value Range:TCH:480~14880; SDCCH:470~14570 Default Value:2
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:For the purpose of accurately reflecting the radio enviro of a network, the measured values in several consecutive measurement reports are filtered. This parameter indicates the nu of measurement reports used when filtering is performed on neighboring cell signal strength measured on TCHs. GUI Value Range:1~31 Unit:470ms/480ms Actual Value Range:TCH:480~14880; SDCCH:470~14570 Default Value:4
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
64/201
16/7/2015
Handover Feature Parameter Description
DATASTRFLTLEN
QLENSD
TIMEPUNISH
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Number of measurement reports sampled for averaging signal strength on a speech or data channel. Averaging the signal strength in multiple measurement reports helps to prevent sharp deterioration of the signal level due to Rayleigh fading and to ens comprehensive handover decision. GUI Value Range:1~31 Unit:480ms Actual Value Range:480~14880 Default Value:4
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- Enhanced 111005 Channel Assignment Algorithm
Meaning:For the purpose of accurately reflecting the radio enviro of a network, filtering is performed on the measured values in se consecutive measurement reports. This parameter indicates the number of measurement reports used for the filtering of the signal quality on service or data channels. This parameter is used to determine whether interferences exist on channels. GUI Value Range:1~32 Unit:480ms Actual Value Range:480~15360 Default Value:6
BSC6900/BSC6910 SET GCELLHOFAST GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After the fast handover is successful, the penalty on the original serving cell is performed within the "Quick handover puni time": the receive level of the original serving cell is decreased b "Quick handover punish value", to prevent ping-pong handovers. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
HOPUNISHVALUE
BSC6900/BSC6910 SET GCELLHOFAST GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:To avoid ping-pong handover, the received signal of the original serving cell is decreased by "Quick handover punish valu "Quick handover punish time" after fast handover succeeds. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:63
QuickHoPunishSw
BSC6900/BSC6910 SET GCELLHOFAST GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to punish the fast handover. Fast handover pu aims to decrease the handover priority of the source cell after the hands over to the target cell from the source cell to avoid ping-pa handover. If this parameter is set to OFF(Off), the BSC does not punish the fast handover. If this parameter is set to ON(On), the punishes the fast handover. GUI Value Range:OFF(Off), ON(On) Unit:None Actual Value Range:OFF, ON Default Value:ON(On)
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After the time advancing handover is successful, the pe on the original serving cell is performed within the "Penalty Time TA HO": the receive level of the original serving cell is decreased "Penalty Level after TA HO", to prevent ping-pong handovers. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:63
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After the time advancing handover is successful, the pe on the original serving cell is performed within the "Penalty Time TA HO": the receive level of the original serving cell is decreased "Penalty Level after TA HO", to prevent ping-pong handovers. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:30
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After a successful handover due to bad quality or insuffi TRX power, the penalty on the original serving cell is performed the "Penalty Time after BQ HO": the receive level of the original serving cell is decreased by "Penalty Level after BQ HO", to pre ping-pong handovers. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:63
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After a successful handover due to bad quality or insuffi TRX power, the penalty on the original serving cell is performed the time specified by "Penalty Time after BQ HO". That is, the re level of the original serving cell is decreased by "Penalty Level af BQ HO". This prevents ping-pong handovers. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:After a load handover succeeds, the BSC punishes the former serving cell during "Penalty Time on Load HO" by subtrac "Penalty Value on Load HO" from the receive level of the former serving cell, thus avoiding ping-pong handovers. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
SSTAPUNISH
TIMETAPUNISH
SSBQPUNISH
TIMEBQPUNISH
LOADHOPENTIME
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
65/201
16/7/2015
Handover Feature Parameter Description 110601 Handover GBFD- HUAWEI II 510501 Handover
ean ng: er a oa an over succee s, e pun s es e former serving cell during "Penalty Time on Load HO" by subtrac "Penalty Value on Load HO" from the receive level of the former serving cell, thus avoiding ping-pong handovers. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:63
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to enable penalty inheritance for load-based handovers. With the handover penalty inheritance function, the p list will be transferred to the target cell along with a call handover GUI Value Range:OFF(Off), ON(On) Unit:None Actual Value Range:OFF, ON Default Value:OFF(Off)
BSC6900/BSC6910 ADD GEXT2GCELL MOD GEXT2GCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Level value of the penalty that is performed on the neighboring cells of the cell where a fast-moving MS is located. neighboring cells must be located at the Macro, Micro, or Pico la other than the Umbrella layer. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:30
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Period in which penalty is performed on the neighboring of the cell where a fast-moving MS is located. The neighboring c must be located at the Macro, Micro, or Pico layer but not the Umbrella layer. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:40
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Period during which the corresponding handover cannot performed again if one of the following handovers fails: 1. AMR T TCHH handovers (including TCHF-TCHH handovers for Huawei handover algorithm I, TCHF-TCHH handovers for Huawei hando algorithm II, and TCHF-TCHH handovers based on capacity and quality for Huawei handover algorithm I) 2. AMR TCHH-TCHF handovers (including TCHH-TCHF handovers for Huawei handov algorithm I, TCHH-TCHF handovers for Huawei handover algorit and TCHH-TCHF handovers based on capacity and quality for Huawei handover algorithm I) 3. Non-AMR TCHF-TCHH handov (including non-AMR TCHF-TCHH handovers for Huawei handov algorithm I, non-AMR TCHF-TCHH handovers for Huawei hando algorithm II, and non-AMR TCHF-TCHH handovers based on ca and quality for Huawei handover algorithm I) 4. Non-AMR TCHHTCHF handovers (including non-AMR TCHH-TCHF handovers fo Huawei handover algorithm I, non-AMR TCHH-TCHF handovers Huawei handover algorithm II, and non-AMR TCHH-TCHF hando based on capacity and quality for Huawei handover algorithm I) 5 Handovers triggered by TCHH integration. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Period in which interference handovers are not allowed a successful or failed interference handover is performed. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:15
GCELLHOFITPEN
LoadHoPunishInheritSwitch
SDPUNVAL
SPEEDPUNISHT
TIMEAMRFHPUNISH
INTERFEREHOPENTIME
UTOOHOPENTIME
BSC6900/BSC6910 SET GCELLHOIUO GBFD- Concentric 113201 Cell
Meaning:After an MS performs an OL subcell to UL subcell hand successfully, the MS cannot be handed over to the OL subcell a within the value of the parameter. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
HOPENALTYTIME
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:An MS cannot be handed over from the underlaid subcel the overlaid subcell in this duration after the MS is handed over fr the overlaid subcell to the underlaid subcell successfully. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:5
FAILSIGSTRPUNISH
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Penalty signal level imposed on a target cell to which th handover fails due to congestion or poor radio quality. This penalt helps to prevent the MS from making a second handover attempt the target cell. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:30
UMPENALTYTIMER
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Timer of penalty on a neighboring cell when a handover due to faults of air interface connection. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
66/201
16/7/2015
Handover Feature Parameter Description
RSCPENALTYTIMER
PENALTYTIMER
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Timer for punishing the neighboring cells when handove failures occur due to resource-related causes, such as resources being insufficient GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:5
BSC6900/BSC6910 SET GCELLHOFITPEN
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Timer of penalty on a neighboring cell when a handover due to faults of data configuration. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:255
TIMEOTOUFAILPUN
BSC6900/BSC6910 SET GCELLHOIUO GBFD- Concentric 113201 Cell
Meaning:After an OL subcell to UL subcell handover of an MS fai the MS does not perform OL subell-UL subcell handovers within value of the parameter. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
TIMEUTOOFAILPUN
BSC6900/BSC6910 SET GCELLHOIUO GBFD- Concentric 113201 Cell
Meaning:After an UL subcell to OL subcell handover of an MS fai the MS does not perform UL subcell to OL subcell handovers wit the value of the parameter. GUI Value Range:10~255 Unit:s Actual Value Range:10~255 Default Value:40
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- SDCCH 110608 Handover
Meaning:Whether to allow inter-BSC SDCCH handovers GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:If the downlink received signal level of a neighbor cell is greater than or equal to "Min DL Level on Candidate Cell" plus " Access Level Offset", the neighbor cell can be listed in the candi cell queue for handover. A neighboring cell can be added to the candidate cell list only when both of the following conditions are Downlink receive level of the neighboring cell >= "HOCDCMINDWPWR" + "MINOFFSET", Uplink receive level o neighboring cell >= "HOCDCMINUPPWR" + "MINOFFSET". GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:15
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Minimum receive level offset. The following condition m be met for a neighboring cell to be added into the candidate cell q Neighboring cell uplink level >= ("HOCDCMINUPPWR" + "MINOFFSET") and Neighboring cell downlink level >= ("HOCDCMINDWPWR" + "MINOFFSET"). GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:0
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Limit on the minimum uplink receive level for a neighbori cell. You are advised to use the default value 0 for this paramete because the receive level for a neighboring cell can be limited by DL Level on Candidate Cell. The uplink receive level for a neighb cell cannot be obtained from a live network. It is estimated using following formula: Uplink receive level for a neighboring cell = Maximum transmit power of an MS - (BTS transmit power - Dow receive level for a neighboring cell). A neighboring cell can be ad the candidate cell list only when both of the following conditions met: Downlink receive level of the neighboring cell >= "HOCDCMINDWPWR" + "MINOFFSET", Uplink receive level o neighboring cell >= "HOCDCMINUPPWR" + "MINOFFSET". GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:0
INRBSCSDHOEN
HOCDCMINDWPWR
MINOFFSET
HOCDCMINUPPWR
FDDREP
MINECNOTHRES
BSC6900/BSC6910 SET GBFD- GSM/WCDMA Meaning:This parameter specifies whether Ec/No or RSCP is us GCELLCCUTRANSYS 114301 Interoperability the measurement report on an FDD cell. Ec/No stands for the si GBFD- Processing of to-noise ratio. RSCP stands for the received signal code power. 110801 Measurement GUI Value Range:RSCP(RSCP), EcN0(Ec/No) GBFD- Report Unit:None 110802 Pre-processing Actual Value Range:RSCP, EcN0 of Default Value:EcN0(Ec/No) Measurement Report
BSC6900/BSC6910 ADD GEXT3GCELL MOD GEXT3GCELL
GBFD- GSM/WCDMA Meaning:Minimum level threshold for triggering a handover to a 3 114301 Interoperability candidate cell. If the measured level of a 3G neighboring cell is lo than this threshold, the 3G neighboring cell will be removed from 3G candidate cells. The decibel value corresponding to the para values are as follows: (For details, see the 3GPP TS 45.008 protocol.): 0: < -24 dB 1: -24 dB <= CPICH Ec/Io < -23.5 dB 2: dB <= CPICH Ec/Io < -22 dB ... 47: -1 dB <= CPICH Ec/ Io < -0. 48: -0.5 dB <= CPICH Ec/Io < 0 dB 49: 0 dB <= CPICH Ec/Io. GUI Value Range:0~49 Unit:dB
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
67/201
16/7/2015
Handover Feature Parameter Description c ua a ue ange: ~ Default Value:25
MINRSCPTHRES
BSC6900/BSC6910 ADD GEXT3GCELL MOD GEXT3GCELL
HOPRIOMODEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:Whether to adjust handover priority in handover algorith If this parameter is set to YES(Yes), an edge handover using handover algorithm II is not an emergency handover, cell level, priority, and load are considered in an emergency handover, and better cell handover takes precedence over an emergency hando this parameter is set to NO(No), the handover priority in handove algorithm II is not adjusted. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLBASICPARA
GBFD- Direct Retry 110607
Meaning:Whether to enable a directed retry. The directed retry is hand over an MS to a neighboring cell in the same procedure as t handover. The directed retry is an emergency measure applicable abnormal traffic peaks in some areas of a radio network. You sho not use the directed retry as a major means of solving traffic congestion. If the directed retry always occurs in some areas of network, consider adjusting the sector and TRX configuration an network layout. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
BSC6900/BSC6910 SET GCELLCCBASIC GBFD- Direct Retry 110607
Meaning:Whether to enable the directed retry based on cell load. Directed retry is enabled if the following conditions are met: This parameter is set to ENABLE. The cell supports directed retry. Th current cell load is larger than or equal to the value of "CDRTTRYFBDTHRES" in "SET GCELLOTHEXT" during assignment. If this parameter is set to DISABLE, the MS attemp apply for a channel in the serving cell. If the application fails, it continues with the directed retry procedure. GUI Value Range:DISABLE(Disable), ENABLE(Enable) Unit:None Actual Value Range:DISABLE, ENABLE Default Value:DISABLE(Disable)
BSC6900/BSC6910 SET GCELLCCBASIC GBFD- Direct Retry 110607
Meaning:Threshold of the load in the target cell for the directed re Only a cell whose load is lower than or equal to this threshold ca selected as a candidate target cell. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:85
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
Meaning:Difference between the downlink receive level of the se cell and that of a neighboring cell during handovers due to directe retry. In the case of Huawei handover algorithm II, this paramete used to calculate the hysteresis of handovers due to directed retr using the following formula: Hysteresis of handovers due to direc retry = Value of "INTERCELLHYST" - Value of this parameter. Handovers due to directed retry to a neighboring cell can be trigg when the following condition is met: (Downlink receive level of th neighboring cell after filtering - Downlink receive level of the servi cell after power control compensation) > (Value of "INTERCELLHYST" - 64) - (Value of this parameter - 64). GUI Value Range:0~128 Unit:dB Actual Value Range:0~128 Default Value:72
DIRECTRYEN
ASSLOADJUDGEEN
DTLOADTHRED
DRHOLEVRANGE
MINPWRLEVDIRTRY
DRTAGCELLSEL
GBFD114301 GBFD114302
GBFD110601 GBFD510501
GSM/WCDMA Interoperability GSM/TDSCDMA Interoperability
HUAWEI I Handover HUAWEI II Handover
Meaning:Minimum level threshold for triggering a handover to a 3 candidate cell. If the measured level of a 3G neighboring cell is lo than this threshold, the 3G neighboring cell will be removed from 3G candidate cells. The decibel value corresponding to the para values are as follows: (For details, see the 3GPP TS 45.008 protocol.): 0: CPICH RSCP < -115 dBm 1: -115 dBm <= CPICH RSCP < -114 dBm 2: -114 dBm <= CPIC H RSCP < -113 dBm .. -55 dBm <= CPICH RSCP < -54 dBm 62: -54 dBm <= CPICH R < -53 dBm 63: -53 dBm <= CPICH RSCP. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:20
BSC6900/BSC6910 SET GCELLHOCTRL GBFD- Direct Retry 110607
Meaning:Level threshold for a candidate cell in a directed retry w handover algorithm I is used. If the receive level for a neighboring is higher than or equal to the value of this parameter, the neighbo cell can be selected as a candidate cell for the directed retry. Thi parameter is invalid in handover algorithm II. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:16
BSC6900/BSC6910 SET GCELLOTHEXT GBFD- Direct Retry 110607
Meaning:Whether directed retry can be performed to multiple targ cells. When this parameter is set to "YES", directed retry can be performed to multiple target cells. When this parameter is set to " directed retry can be performed to only one target cell. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
68/201
16/7/2015
Handover Feature Parameter Description 110601 Handover
HOOPTSEL
NEWURGHOMININTV
QUICKHOEN
MOVESPEEDTHRES
HOUPTRIGE
HODOWNTRIGE
HOOFFSET
ADJHOOFFSET
ean ng: ax mum num er o an over a emp s a can e triggered. When there is more than one candidate cell, the BSC attempts to hand over the MS to the second candidate cell if congestion occurs in the first candidate cell to ensure handover success and call continuity. If congestion also occurs in the sec candidate cell, the BSC attempts to hand over the MS to the thir candidate cell. GUI Value Range:1~3 Unit:None Actual Value Range:1~3 Default Value:3
BSC6900/BSC6910 SET GBFD- HUAWEI I GCELLHOUTRANFDD 110601 Handover GBFD- HUAWEI II 510501 Handover GBFD- GSM/WCDMA 114301 Interoperability GBFD- GSM/TD114302 SCDMA Interoperability
Meaning:This parameter specifies whether a 2G cell or to a 3G c preferentially selected as the target cell for handover. When this parameter is set to Pre_2G_Cell, the BSC preferentially selects candidate cell as the target cell f or handover. When this paramet set to Pre_3G_Cell, the BSC preferentially selects a 3G candidat as the target cell for handover. When this parameter is set to Pre_2G_CellThres, the BSC preferentially selects a neighboring cell as the handover target cell if the receive level of the neighbor 2G cell that ranks the first in the candidate cell list is equal to or smaller than "HO Preference Threshold for 2G Cell". Otherwise, BSC preferentially selects a neighboring 2G cell as the handover target cell. GUI Value Range:Pre_2G_Cell(Preference for 2G cell), Pre_3G_Cell(Preference for 3G cell), Pre_2G_CellThres(Preferen 2G cell by thresh) Unit:None Actual Value Range:Pre_2G_Cell, Pre_3G_Cell, Pre_2G_CellThr Default Value:Pre_2G_CellThres(Preference 2G cell by thresh)
BSC6900/BSC6910 SET GCELLHOCTRL GBFD110601 GBFD510501
Meaning:Minimum interval between two consecutive emergency handovers performed by an MS. During this interval, no emergen handover is allowed. GUI Value Range:0~60 Unit:s Actual Value Range:0~60 Default Value:4
HUAWEI I Handover HUAWEI II Handover
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- Fast Move 510102 Handover
Meaning:Whether to allow the fast handover algorithm GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Fast Move 510102 Handover
Meaning:A quick handover can be initiated only if the rate of an higher than this parameter during a period of time. GUI Value Range:0~600 Unit:m/s Actual Value Range:0~600 Default Value:35
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Fast Move 510102 Handover
Meaning:Threshold for the uplink receive level during fast handov Fast handovers are triggered when the uplink receive level in the serving cell is lower than this threshold. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:50
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Fast Move 510102 Handover
Meaning:Threshold for the downlink receive level during fast handovers. Fast handovers may be triggered when the downlink receive level in the serving cell is lower than this threshold. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:50
BSC6900/BSC6910 SET GCELLHOFAST GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter is used for quick handover decisions. Q handover can be triggered only when the following condition is m Path loss in the serving cell - Path loss in chain neighboring cell quick handover trigger threshold The quick handover trigger thres is the sum of "HOOFFSET" in "SET GCELLHOFAST" in the cas internal neighboring cells or in "MOD GEXT2GCELL" in the case external neighboring cells and "ADJHOOFFSET" configured by t neighboring cell. The actual value of this parameter is equal to th value minus 64. GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:68
GBFD- Fast Move 510102 Handover
Meaning:This parameter is used as the offset for "HOOFFSET" ( "SET GCELLHOFAST" in the case of internal neighboring cells o "MOD GEXT2GCELL" in the case of external neighboring cells)d handover decision. Quick handover can be triggered only when th following condition is met: Path loss in the serving cell - Path los chain neighboring cell > The quick handover trigger threshold The quick handover trigger threshold is the sum of "HOOFFSET"(for " GCELLHOFAST" in the case of internal neighboring cells or for " GEXT2GCELL" in the case of external neighboring cells) and "ADJHOOFFSET" configured by the neighboring cell. GUI Value Range:0~127 Unit:dB Actual Value Range:0~127 Default Value:0
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
69/201
16/7/2015
Handover Feature Parameter Description
ISCHAINNCELL
- as ove 510102 Handover
ean ng: s parame er s se o , quc an over c initiated when the trigger conditions for the quick PBGT handover met during handover decision. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
GBFD- Chain Cell 510103 Handover
Meaning:Whether the cell is a chain neighboring cell. The parame used in the quick handover algorithm. Quick handover aims to increase the handover success rate of an MS moving at a high s and to ensure the call continuity and low call drop rate. Quick handover applies to the scenario where an MS moves fast along urban backbone road, a selected route, or a high-speed railroad. target cell must be a chain neighboring cell. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Chain Cell 510103 Handover
Meaning:Handover direction forecast swi tch. When this paramet set to YES, the BSC can forecast the handover direction of the c fast handover so that the best target cell can be selected for handover. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
Meaning:This parameter indicates the geographical relationship between the neighboring cell and the serving cell. In the BSC, if direction A is selected, then the reverse direction is B. GUI Value Range:QUICK_HO_NCELL_TYPE_A(QUICK_HO_NCELL_TYP QUICK_HO_NCELL_TYPE_B(QUICK_HO_NCELL_TYPE_B) Unit:None Actual Value Range:QUICK_HO_NCELL_TYPE_A, QUICK_HO_NCELL_TYPE_B Default Value:QUICK_HO_NCELL_TYPE_A(QUICK_HO_NCELL_TYP
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
HODIRFORECASTEN
CHAINNCELLTYPE
GBFD- Chain Cell 510103 Handover
HODIRLASTTIME
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Chain Cell 510103 Handover
Meaning:This parameter indicates P in the P/N rule for MS hando direction forecast. P/N rule: Among N handovers, the MS is hand over to Class B chain neighboring cell for successively P times, then the BSC determines that the MS is moving to the Class B c neighboring cell. GUI Value Range:0~16 Unit:None Actual Value Range:0~16 Default Value:3
HODIRSTATIME
BSC6900/BSC6910 SET GCELLHOFAST GBFD- Chain Cell 510103 Handover
Meaning:This parameter indicates N in the P/N rule for MS hand direction forecast. P/N rule: Among N handovers, the MS is hand over to Class B chain neighboring cell for successively P times, then the BSC determines that the MS is moving to the Class B c neighboring cell. GUI Value Range:0~16 Unit:None Actual Value Range:0~16 Default Value:3
TAHOEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to allow the TA handover algorithm. The TA handover determines whether the TA is greater than or equal to t predefined TA threshold. When the TA is greater than or equal to predefined TA threshold, a TA handover is triggered. The TA is calculated based on the distance between the MS and the BTS. longer the distance is, the larger the TA value is. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
TALIMIT
BSC6900/BSC6910 SET GCELLHOEMG GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:An emergency handover is triggered when TA is greater or equal to the value of this parameter. GUI Value Range:0~255 Unit:bit Actual Value Range:0~255 Default Value:255
BSC6900/BSC6910 SET GCELLHOBASIC GBFD114301 GBFD114302 GBFD511103 GBFD511402
GSM/WCDMA Interoperability GSM/TDSCDMA Interoperability GSM and WCDMA Load Balancing Based on Iur-g Radio Resource Reserved Handover Between GSM/TDSCDMA Based on Iur-g
Meaning:Whether to allow a handover from a 2G cell to a 3G cell. this parameter is set to NO, inter-RAT outgoing BSC handovers inter-RAT directed retries cannot be initiated. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
INTERRATOUTBSCHOEN
BQHOEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I
Meaning:Whether to enable the bad quality (BQ) handover algorit
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
70/201
16/7/2015
Handover Feature Parameter Description an over GBFD- HUAWEI II 510501 Handover
e er o r gger an over epen s on e up n an own receive quality (measured by BER). If the uplink or downlink rece quality is greater than or equal to the BQ handover threshold, emergency BQ handover is triggered. The possible causes of BE increase (or quality degradation) include too low signal power and channel interference. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
ULQUALIMIT
BSC6900/BSC6910 SET GCELLHOEMG GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:An emergency handover due to bad quality is triggered the uplink receive quality is not smaller than "UL Qual. Threshold GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:55
DLQUALIMIT
BSC6900/BSC6910 SET GCELLHOEMG GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Limit to the downlink receive signal quality during emerg handovers. The value of this parameter equals any of the quality levels 0 through 7 multiplied by 10. Emergency handovers can be triggered only when the downlink receive signal quality of an MS higher than or equal to the value of this parameter (the downlink receive signal quality is poor). GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:55
ULQUALIMITAMRFR
BSC6900/BSC6910 SET GCELLAMRQUL GBFD115501 GBFD510501 GBFD110601
AMR FR HUAWEI II Handover HUAWEI I Handover
Meaning:The value of this parameter corresponds to multiplying q level 0 to 7 by 10. An emergency handover can be triggered only the uplink receive quality of the MS is greater than or equal to the value of this parameter. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:60
DLQUALIMITAMRFR
BSC6900/BSC6910 SET GCELLAMRQUL GBFD115501 GBFD510501 GBFD110601
AMR FR HUAWEI II Handover HUAWEI I Handover
Meaning:Downlink quality limit f or emergency handover in an AM rate call. The value of this parameter corresponds to the quality l (0 to 7) multiplied by 10. An emergency handover can be triggere when the downlink reception quality of an MS is higher than or eq to the value of this parameter, which indicates a poor quality. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:60
ULQUALIMITAMRHR
BSC6900/BSC6910 SET GCELLAMRQUL GBFD115502 GBFD510501 GBFD110601
AMR HR HUAWEI II Handover HUAWEI I Handover
Meaning:The value of this parameter corresponds to multiplying q level 0 to 7 by 10. An emergency handover can be triggered only the uplink receive quality of the MS is greater than or equal to the value of this parameter. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:55
DLQUALIMITAMRHR
BSC6900/BSC6910 SET GCELLAMRQUL GBFD115502 GBFD510501 GBFD110601
AMR HR HUAWEI II Handover HUAWEI I Handover
Meaning:Downlink quality limit for emergency handover in an AM half rate call. The value of this parameter corresponds to the qual levels (0 to 7) multiplied by 10. An emergency handover can be triggered only when the downlink reception quality of an MS is hi than or equal to the value of this parameter, which indicates a po quality. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:55
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501 GBFD118106
HUAWEI I Handover HUAWEI II Handover Dynamic Power Sharing
Meaning:Hysteresis value during the handovers between cells, T value is used to suppress ping-pong handovers between cells. T actual value of this parameter is equal to the GUI value minus 6 GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:68
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501 GBFD118106
HUAWEI I Handover HUAWEI II Handover Dynamic Power Sharing
Meaning:Difference between the downlink receive level of the se cell and that of a neighboring cell during bad quality handovers. T parameter is used to calculate the bad quality handover hysteresi based on the following formula: Bad quality handover hysteresis Value of "INTERCELLHYST" -Value of this parameter Bad qualit handovers to a neighboring cell can be triggered when the followi condition is met: (Downlink receive level of the neighboring cell a filtering - Downlink receive level of the serving cell after power co compensation) > (Value of "INTERCELLHYST" - 64) - (Value of parameter - 64). The actual value of this parameter is equal to th value minus 64. GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:69
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether the statistical and penalty ranges for consecuti intra-cell handovers are the cell level or user level. If this parame set to YES, the statistical object and range for "BANTIME" chan from the cell level to the user level.If this parameter is set to NO, statistical object and range for "BANTIME" remains at the cell le GUI Value Range:NO(No), YES(Yes)
INTERCELLHYST
BQMARGIN
INTRACELLSINUSEREN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
71/201
16/7/2015
Handover Feature Parameter Description Actual Value Range:NO, YES Default Value:NO(No)
BANTIME
BSC6900/BSC6910 SET GCELLHOAD
INTRACELLHOEN
BADQUALHOOPTALLOW
RXQCKFALLHOEN
ULEDGETHRES
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Period in which intra-cell handovers are not allowed whe number of consecutive intra-cell handovers reaches "MAXCNTN If "INTRACELLSINUSEREN" is set to YES, specified MSs in a are not allowed to initiate intra-cell handovers due to quality probl within the duration specified by this parameter. If "INTRACELLSINUSEREN" is set to NO, all MSs in the cell are allowed to initiate intra-cell handovers. For MSs that use handov algorithm I, intra-cell handovers due to quality problems are not allowed. For MSs that use handover algorithm II, interference handovers are not allowed. GUI Value Range:1~200 Unit:s Actual Value Range:1~200 Default Value:20
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to allow intra-cell handovers. Forced intra-cell handovers or AMR TCHF-to-TCHH handovers in the case of Hu handover algorithm I are not subject to this parameter. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:Whether to initiate an inter- or intra-cell bad quality hand by using handover algorithm I. If this parameter is set to YES, on inter-cell bad quality handover can be initiated. If this parameter i to NO, an inter- or intra-cell bad quality handover can be initiated. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:Whether to use the emergency handover algorithm in ca the receive level of the MSs drops rapidly, thus preventing call dr GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
Meaning:If t he UL receive level remains lower than the "Edge H RX_LEV Threshold" for a period, the edge handover is triggered. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:10
HUAWEI I Handover HUAWEI II Handover
FLTPARAA1
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA2
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA3
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
72/201
16/7/2015
Handover Feature Parameter Description
FLTPARAA4
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA5
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA6
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA7
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAA8
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:One of the nine parameters (filter parameters A1 to A8 a filter parameter B) used to configure the filter for determining whe the received signal level drops rapidly. The computation formula i follows: C1(nt) = A1 x C(nt) + A2 x C(nt-t) + A3 x C(nt-2t) + ... + C(nt-7t) If C1(nt) is less than B and C(nt) is less than the thresho edge handover, the signal level is considered dropping rapidly. In formula, A1 to A8 are filter parameters A1 to A8 minus 10 and B i negative of filter parameter B. C(nt) indicates the received signal in the uplink measurement report of the serving cell received at ti nt. Setting the filter helps to configure the maximum allowed sign level drop degree. GUI Value Range:0~20 Unit:None Actual Value Range:0~20 Default Value:10
FLTPARAB
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:Trend of the received signal level of the cell during a per This parameter helps to configure the filter for determining wheth received signal level decreases sharply. If this parameter is set t large value, the signal level needs to decrease sharply to trigger t handover due to rapid signal level decrease. GUI Value Range:0~200 Unit:None Actual Value Range:0~200 Default Value:0
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:Whether to initiate an inter- or intra-cell interference han by using handover algorithm I. If this parameter is set to YES, on intra-cell interference handover can be initiated and the handover decision priority falls behind the priority of the AMR TCHF-to-TC handover. If this parameter is set to NO, an intra- or inter-cell interference handover can be initiated. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES
INTERHOOPTALLOW
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
73/201
16/7/2015
Handover Feature Parameter Description
INTERFHOEN
RXLEVOFF
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to allow the interference handover algorithm. Interference handovers are triggered when the receive quality lev greater than the expected receive quality threshold based on the current receive level. That is, handovers are required when the M are subject to all kinds of radio interferences. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
BSC6900/BSC6910 SET GCELLAMRQUL GBFD115501 GBFD510501 GBFD110601
AMR FR HUAWEI II Handover HUAWEI I Handover
Meaning:For AMR FR voice services, a fixed amount of offset is added to the corresponding grade of the received signal quality fo interference handover of non-AMR FR voice services. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:5
RXQUAL1
BSC6900/BSC6910 SET GCELLAMRQUL GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Threshold for triggering interference handovers of non-A FR voice services. If "INTERFHOEN" is set to YES(Yes), interference handovers can be triggered when the following condi are met: The uplink receive signal quality after filtering is higher t the specified threshold for the receive signal quality at the curren uplink level. The downlink receive signal quality after filtering is h than the specified threshold for the receive signal quality at the c downlink level. At the current uplink and downlink levels, the parameters for specifying the thresholds for the uplink and downli receive signal quality are as follows: "RXQUALn" (1 <= n <= 12): used for non-AMR FR calls. The receive signal quality equals the value of "RXQUAL1" if the value of n is 1. The receive signal qu equals the sum of the values of "RXQUALn" and "FHGAINOFFS if both of the following conditions are met: 2 <= n <= 12 The curr frequencies involve in FH. "RXQUALn" (1 <= n <= 12): used for FR calls. The receive signal quality equals the value of "RXQUA the value of n is 1. The receive signal quality equals the sum of t values of "RXQUALn" and "RXLEVOFF" if the following conditio met: 2 <= n <= 12 The receive signal quality equals the sum of t values of "RXQUALn", "RXLEVOFF", and "FHGAINOFFSET" if current frequencies involve in FH. When Huawei handover algorit is used and this parameter is set to 70, the BSC does not trigger interference handovers for calls whose signal level class is lower 31 dB. This parameter is invalid if Huawei handover algorithm II i used. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:70
HOTHRES
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Handover threshold during the handovers between cells different layers or of different priorities. This value is used to sup inter-layer ping-pong handovers. Inter-layer handover threshold of serving cell = "Inter-layer HO threshold" - "Inter-layer HO Hyster Inter-layer handover threshold of a neighboring cell = "Inter-layer Threshold" + "Adjacent Cell Inter-layer HO Hysteresis" - 64. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:25
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to sup inter-layer ping-pong handovers. The actual v alue of this paramet equal to the GUI value minus 64. GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:67
BSC6900/BSC6910 SET GCELLAMRQUL GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Threshold for triggering interference handovers of non-A FR voice services. If "INTERFHOEN" is set to YES(Yes), interference handovers can be triggered when the following condi are met: The uplink receive signal quality after filtering is higher t the specified threshold for the receive signal quality at the curren uplink level. The downlink receive signal quality after filtering is h than the specified threshold for the receive signal quality at the c downlink level. At the current uplink and downlink levels, the parameters for specifying the thresholds for the uplink and downli receive signal quality are as follows: "RXQUALn" (1 <= n <= 12): used for non-AMR FR calls. The receive signal quality equals the value of "RXQUAL1" if the value of n is 1. The receive signal qu equals the sum of the values of "RXQUALn" and "FHGAINOFFS if both of the following conditions are met: 2 <= n <= 12 The curr frequencies involve in FH. "RXQUALn" (1 <= n <= 12): used for FR calls. The receive signal quality equals the value of "RXQUA the value of n is 1. The receive signal quality equals the sum of t values of "RXQUALn" and "RXLEVOFF" if the following conditio met: 2 <= n <= 12 The receive signal quality equals the sum of t values of "RXQUALn", "RXLEVOFF", and "FHGAINOFFSET" if current frequencies involve in FH. When handover algorithm II is the preceding conditions apply except for the following changes: value of "INTERFEREULEVOFF" or "INTERFEREDLEVOFF" is added to the current uplink or downlink level, respectively. The v of "INTERFEREUQUALOFF" or "INTERFEREDQUALOFF" is a to the uplink or downlink receive signal quality, respectively. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:50
INTELEVHOHYST
RXQUAL12
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
74/201
16/7/2015 RXQUAL2
Handover Feature Parameter Description
NODLMRHOEN
NODLMRHOQUALLIMIT
NODLMRHOALLOWLIMIT
BSC6900/BSC6910 SET GCELLAMRQUL GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Threshold for triggering interference handovers of non-A FR voice services. If "INTERFHOEN" is set to YES(Yes), interference handovers can be triggered when the following condi are met: The uplink receive signal quality after filtering is higher t the specified threshold for the receive signal quality at the curren uplink level. The downlink receive signal quality after filtering is h than the specified threshold for the receive signal quality at the c downlink level. At the current uplink and downlink levels, the parameters for specifying the thresholds for the uplink and downli receive signal quality are as follows: "RXQUALn" (1 <= n <= 12): used for non-AMR FR calls. The receive signal quality equals the value of "RXQUAL1" if the value of n is 1. The receive signal qu equals the sum of the values of "RXQUALn" and "FHGAINOFFS if both of the following conditions are met: 2 <= n <= 12 The curr frequencies involve in FH. "RXQUALn" (1 <= n <= 12): used for FR calls. The receive signal quality equals the value of "RXQUA the value of n is 1. The receive signal quality equals the sum of t values of "RXQUALn" and "RXLEVOFF" if the following conditio met: 2 <= n <= 12 The receive signal quality equals the sum of t values of "RXQUALn", "RXLEVOFF", and "FHGAINOFFSET" if current frequencies involve in FH. When handover algorithm II is the preceding conditions apply except for the following changes: value of "INTERFEREULEVOFF" or "INTERFEREDLEVOFF" is added to the current uplink or downlink level, respectively. The v of "INTERFEREUQUALOFF" or "INTERFEREDQUALOFF" is a to the uplink or downlink receive signal quality, respectively. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:60
BSC6900/BSC6910 SET GCELLHOEMG GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to enable the no-downlink measurement report handover algorithm GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:When a certain number of no-downlink measurement re are received consecutively and the uplink receive quality is no s than this parameter, no-downlink measurement report emergency handovers are triggered. No-downlink measurement report emerg handovers choose the inter-cell handover mode preferentially; however, if no candidate cells are available and intra-cell handov enabled in the current cell, intra-cell handovers are triggered. GUI Value Range:0~70 Unit:None Actual Value Range:0~70 Default Value:50
BSC6900/BSC6910 SET GCELLHOEMG GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Decisions of no-downlink measurement report handover be made only when the number of consecutive no-downlink measurement reports in the current call is no larger than this parameter. GUI Value Range:0~64 Unit:None Actual Value Range:0~64 Default Value:8
NODLMRHOLASTTIME
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:A handover due to no downlink measurement report can triggered when a consecutive of P measurement reports do not h downlink measurement data during the time specified by "No Dl HO Statistic Time". This parameter corresponds to P of the P/N GUI Value Range:1~16 Unit:None Actual Value Range:0.5~8, step: 0.5 Default Value:1
NODLMRHOSTATTIME
BSC6900/BSC6910 SET GCELLHOEMG GBFD- HUAWEI I 110601 Handover
Meaning:A handover due to no downlink measurement report can triggered when a consecutive of P measurement reports do not h downlink measurement data during the time specified by this parameter. This parameter corresponds to N of the P/N rule. GUI Value Range:1~16 Unit:None Actual Value Range:0.5~8, step: 0.5 Default Value:1
OUTLOADHOENABLE
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Whether to allow overlay-to-underlay load handovers. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
OUTGENOVERLDTHRED
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Threshold for the overall load in an underlaid subcell. W the load in the underlaid cell is higher than or equal to this thresh certain calls can be handed over from the underlaid subcell to an overlaid subcell, and channels in the overlaid subcell can be preferentially allocated to calls initiated in the underlaid subcell. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:80
INNSERIOVERLDTHRED
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Threshold for the serious overload in an overlaid subcell. an enhanced dual-band network, handovers from an underlaid su to an overload subcell can be triggered when the load in the overl subcell is lower than this threshold. GUI Value Range:0~100
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
75/201
16/7/2015
Handover Feature Parameter Description Actual Value Range:0~100 Default Value:90
EDBSYSFLOWLEV
INTOINNREXLEVTHRED
ATCBTHRED
ATCBHYST
OUTSERIOVERLDTHRED
OUTLOADHOPERIOD
OUTLOADHOMODPERI
OUTLOADHOSTEP
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:If the current system flow control level is greater than th parameter, the handover between the underlaid and overlaid subc due to low or high load in the underlaid subcell is not allowed. GUI Value Range:0~11 Unit:None Actual Value Range:0~11 Default Value:10
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Threshold for the receive level during handovers from an underlaid subcell to an overlaid subcell. Handovers from an unde subcell to an overlaid subcell can be triggered when both the follo conditions are met: Average receive level in the overlaid subcell the underlaid cell >= Value of this parameter Receive level in the underlaid cell - Highest receive level in a neighboring cell of the underlaid cell > Sum of the values of "ATCBTHRED" and "ATCBHYST". GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:30
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Distance between the boundary of the overlaid subcell a the boundary of the underlaid subcell. This parameter specifies th difference between the coverage of the overlaid subcell and the coverage of the underlaid subcell in the concentric cell or dualfrequency network scenario. The boundaries of the overlaid and underlaid subcells are determined according to the relative value between the signal strength of the serving cell and the signal stre of the neighbor cell. Assume that the signal strength of the servin is SS(s) and that the signal strength of the neighbor cell is SS(n). SS(s) = SS(n), the MS is on the boundary of the underlaid subcel SS(s) - SS(n) > "Distance Between Boudaries of Subcells", the in the coverage of the overlaid subcell. In the tight BCCH handov algorithm, this parameter specifies the difference between the coverage of the TRX that carries the BCCH and the coverage of TRX that does not carry the BCCH. The relevant computation is same as the preceding computation. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:10
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Hysteresis in the distance between the boundary of the overlaid subcell and the boundary of the underlaid subcell. This parameter helps to adjust "Distance Between Boundaries of Sub and thus to prevent ping-pong handover between the overlaid and underlaid subcells. Assume that the signal strength of the servin is SS(s) and that the signal strength of the neighbor cell is SS(n). SS(s) - SS(n) < "Distance Between Boundaries of Subcells" "Distance Hysteresis Between Boundaries", the MS is handed o from the overlaid subcell to the underlaid subcell. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:2
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:When the load of the underlay subcell is higher than this parameter, the underlay-to-overlay load handover period subtracts period that equals "Step Length of UL Subcell Load HO" from "U Subcell Load Hierarchical HO Periods" every second, thus increa the load handover speed. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:90
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:If the load of the underlaid subcell exceeds "UL Subcell General Overload Threshold", all the calls in this cell initiate hand requests at the same time, which will suddenly increase the the load and possibly cause congestion in the overlaid subcell, leadin handover failures. To resolve this problem, the BSC uses the hierarchical load handover algorithm to gradually hand over some in the underlaid subcell to the overlaid subcell. This parameter indicates the duration of each handover level. GUI Value Range:1~255 Unit:s Actual Value Range:1~255 Default Value:5
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Step for periodic adjustment during handovers from an underlaid subcell to an overlaid subcell. The period of handovers an underlaid subcell to an overlaid subcell equals that specified b "OUTLOADHOPERIOD" minus this step every second when the in the underlaid subcell is higher than the threshold specified by "OUTSERIOVERLDTHRED". GUI Value Range:1~255 Unit:s Actual Value Range:1~255 Default Value:1
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Level step during underlay-to-overlay hierarchical load handovers GUI Value Range:0~63 Unit:dB
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
76/201
16/7/2015
Handover Feature Parameter Description ~ Default Value:5
OUTLOWLOADTHRED
OUTINNREXLEVTHRED
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:When the load of the underlay subcell is lower than this parameter, some of the calls in the overlay subcell will be switch the underlay subcell, and channels in the underlay subcell will be preferentially assigned to channel requests initiated in the overlay subcell as well. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:50
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Threshold for the receive level during handovers from an overlaid subcell to an underlaid subcell. Load-based handovers fr an overlaid subcell to an underlaid subcell can be triggered when receive level in the overlaid subcell is higher than this threshold. Handovers from an overlaid subcell to the edge of an underlaid s can be triggered when one of the following conditions is met: Re level in the overlaid cell < Value of this parameter Receive level i underlaid cell - Highest receive level in a neighboring cell of the underlaid cell < Value of "ATCBTHRED" - Value of "ATCBHYST GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:25
INNLOADHOPERI
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Overlay-to-underlay load handovers are performed by le This parameter indicates the duration of each level. GUI Value Range:1~255 Unit:s Actual Value Range:1~255 Default Value:10
INNLOADHOSTEP
BSC6900/BSC6910 SET GCELLHOEDBPARA
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Level step during overlay-to-underlay hierarchical load handovers GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:5
BSC6900/BSC6910 ADD GCELL MOD GCELL
GBFD- Enhanced 114402 Dual-Band Network
Meaning:This parameter specifies w hether a cell is the OL subce the UL subcell. This parameter is applied to the enhanced dualba cell. GUI Value Range:Inner(Inner), Extra(Extra) Unit:None Actual Value Range:Inner, Extra Default Value:None
GBFD- Enhanced 114402 Dual-Band Network
Meaning:Whether to allow underlay-to-overlay load handovers GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
CELLINEXTP
INNLOADHOEN
BSC6900/BSC6910 SET GCELLHOEDBPARA
DLEDGETHRES
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Threshold for triggering downlink edge handovers. Edge handovers are triggered when the downlink receive level remains than this threshold. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:20
TRIGTHRES
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:A load-based handover is started when the cell load is greater than or equal to this threshold. For inter-BSC load-based handovers, when "LOADHOHYSTADAPEN" is set to YES, this parameter is only used for decision on load-based handovers at t same layer. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:90
LoadAccThres
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Threshold for allowing MSs to hand over from other cell the cell. If the cell load is lower than the threshold specified by th parameter, MSs are allowed to hand over from other cells to the the cell load is higher than or equal to the threshold specified by t parameter, MSs are not allowed to hand over from other cells to t cell. GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:80
LOADHOSTEP
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:In hierarchical load handover algorithm I, starting from "DLEDGETHRES", a "LOADHOSTEP" is added to the upper handover threshold after every "LOADHOPERIOD". In this way, the calls in the current serving cell whose receive level ranging fr "DLEDGETHRES" to "DLEDGETHRES" + "LOADOFFSET" are handed over to other cells. In hierarchical load handover algorith starting from ("INTERCELLHYST" - 64), a "LOADHOSTEP" is removed from the lower handover threshold after every "LOADHOPERIOD". In this way, all the calls whose receive lev the neighboring cell and current serving cell have a difference ran from ("INTERCELLHYST" - 64 - "LOADOFFSET") to ("INTERCELLHYST" - 64) are handed over to other cells. GUI Value Range:1~63 Unit:dB
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
77/201
16/7/2015
Handover Feature Parameter Description ~ Default Value:5
LOADHOPERIOD
LOADOFFSET
LoadHoEn
SYSFLOWLEV
OutBscLoadHoEn
LOADHOAD
LOADSTATYPE
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:If the cell load reaches or exceeds "Load HO Threshold calls in the serving cell initiate handover requests at the same ti which will suddenly increase the load of the CPU. When the traff volume is high, congestion occurs in the cell, leading to call drop resolve this problem, the BSC uses the hierarchical load handov algorithm to control the number of MSs included in each level of handovers. This parameter indicates the duration of each handov level. GUI Value Range:1~255 Unit:s Actual Value Range:1~255 Default Value:10
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:In the handover algorithm of the first generation, load handovers can be performed only when the receive level of the c serving cell is in the range "Edge HO DL RX_LEV Threshold" to "Edge HO DL RX_LEV Threshold" + "Load HO Bandwidth". In th handover algorithm of the second generation, load handovers can performed only when the level difference between the neighborin and the serving cell is between ("Inter-cell HO Hysteresis" - 64) "Load HO Bandwidth" and ("Inter-cell HO Hysteresis" - 64). GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:25
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter specifies whether a traffic load-sharing handover is enabled. The load handover helps to reduce cell congestion, improve success rate of channel assignment, and ba the traffic load among cells, thus improving the network performa The load handover is used as an emergency measure instead of primary measure to adjust abnormal traffic burst in partial areas. I load handovers occur frequently in a partial area, the cell and TR configuration of BTSs and the network layout should be adjusted. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:System flux thresholds correspond to the system flux obtained based on message packets, CPU load, and FID queuin load. The system flux level is the current flux control level of the syst em. 0-11: There are 12 flow control levels. Where, 0 indicate lowest level and 11 indicates the highest level. A load handover i allowed only when the system flux is lower than the value of this parameter. The handover performed over the maximum threshold tremendous impacts on the system. Therefore, this parameter sh not be set to a higher value. 1) The flow control level algorithm fo assigned system messages: [(Average Message Usage - Inner F Control Discard Begin Threshold)/(Inner Flow Control Discard All Threshold - Inner Flow Control Discard Begin Threshold) x 100]/1 (round-down for division operation). If the value is smaller than In Flow Control Discard Begin Threshold, Level 0 is used. If the val equal to or greater than Inner Flow Control Discard Begin Thresh the level is calculated. The value range is from 0 to 11. 2) Flow c threshold for the CPU to start to discard the channel access messages and paging messages: 80% Flow control threshold for CPU to discard all channel access messages and paging messa 100% CPU usage smaller than 80% corresponds to level 0. CPU usage equal to or greater than CPU flow control threshold 80% corresponds to level 2. An increase of 5% means an increase of levels. Level 10 is the highest. The level value can be 0, 2, 4, 6, and 10. GUI Value Range:0;8~11 Unit:None Actual Value Range:0, 8~11 Default Value:10
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to use external 2G neighboring cells as the tar cells of load handovers. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOAD
GBFD- HUAWEI I 110601 Handover
Meaning:Whether to enable the load-based handover enhanceme function. GUI Value Range:NO(NO), YES(YES) Unit:None Actual Value Range:YES, NO Default Value:NO(NO)
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- HUAWEI I 110601 Handover
Meaning:Whether to consider the dynamic PDCHs that have bee converted into PDCHs when the current cell load is calculated. If parameter is set to NODYNPDCH(Not count dynamic PDCH), dynamic PDCHs are not considered as idle or occupied TCHs w the TCH load is calculated. If this parameter is set to DYNPDCHASOCCUPY(Count dynamic PDCH(Occupy)), dyna PDCHs are considered as occupied TCHs when the TCH load is calculated. If this parameter is set to DYNPDCHASIDLE(Count dynamic PDCH(Idle)), dynamic PDCHs are considered as idle T when the TCH load is calculated. GUI Value Range:NODYNPDCH(Not count dynamic PDCH), DYNPDCHASOCCUPY(Count dynamic PDCH(Occupy)), DYNPDCHASIDLE(Count dynamic PDCH(Idle)) Unit:None
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
78/201
16/7/2015
Handover Feature Parameter Description , DYNPDCHASIDLE Default Value:NODYNPDCH(Not count dynamic PDCH)
DYNCHNPREEMPTLEV
CHTYPE
LOADHOUSRRATIO
LOADHOPBGTMARGIN
FRINGEHOEN
,
BSC6900/BSC6910 SET GCELLPSCHM GBFD114101 GBFD113101 GBFD119303 GBFD119501
GPRS Meaning:Mode of preempting dynamic PDCHs converted from T by CS services. Only the channel configured in the TCH/F mode PDCH be preempted. "Preempt all dynamic TCHFs" indicates the circui Dynamic domain can preempt all the dynamic channels. "No preempt of C Adjustment Load Sharing indicates the circuit domain can preempt all the dynamic channel except the CCHs. "No preempt of service TCHF" indicates the c Adaptive domain cannot preempt all the dynamic channels of bearer servic Adjustment of "No preempt of DTM dynamic PDCHs" indicates the circuit dom Uplink and can preempt all dynamic channels except those carrying DTM Downlink services. "No preempt of both DTM dynamic PDCHs and CCCH Channels indicates the circuit domain cannot preempt the CCHs or the dyn channels of DTM services. GUI Value Range:LEVEL0(Preempt all dynamic TCHFs), LEVE preempt of CCHs), LEVEL2(No preempt of service TCHF), LEVEL3(No preempt of DTM dynamic PDCHs), LEVEL4(No pre of both DTM dynamic PDCHs and CCCHs) Unit:None Actual Value Range:LEVEL0, LEVEL1, LEVEL2, LEVEL3, LEVE Default Value:LEVEL0(Preempt all dynamic TCHFs)
BSC6900/BSC6910 SET GTRXCHAN
Radio Common Channel Management Radio Dedicated Channel Management
GBFD111003 GBFD111004
Meaning:Type and function of the channel Combined BCCH+7T Main BCCH+SDCCH/8+6TCH Main BCCH+2SDCCH/8+5TCH BCCH+SDCCH/8+extended BCCH (BCH)+5TCH Main BCCH+SDCCH/8+extended BCCH (BCH)+TCH+extended BC (BCH)+3TCH The BCCHs in a cell need to be configured accord the number of channels in the cell and the paging capacity in the location area. The main and combined BCCHs shall always be configured in timeslot 0. An extended BCCH can be configured o timeslot 2, 4, or 6. If an extended BCCH is configured, the CCC parameter in the system message data needs to be configured accordingly. For example, if an extended BCCH is configured in timeslot 2, the CCCH parameter in the system message data ne to be configured as two uncombined CCCHs. To enable cell broadcast in a cell, add a CBCH to a cell that is about to support broadcasting during radio channel configuration. In the case of SDCCH/8+CBCH cell broadcast, set this parameter to SDCCH_CBCH. You can change a TCH into SDCCH+CBCH o original SDCCH into SDCCH+CBCH. In the case of SDCCH/4 broadcast, set this parameter to BCCH_CBCH. With the same e the SDCCH/8 and SDCCH/4 cell broadcast services serve differ network planning requirements. The data configurations for half-r networking differ from the data configurations for other networkin the case of half-rate networking, each TRX maintains high RSL t Therefore, the LAPD signaling link multiplexing ratio at the Abis interface is up to 2:1. In the case of half-rate networking, each E supports up to 13 TRXs. If the LAPD signaling links are demultiplexed, each E1 supports fewer TRXs. GUI Value Range:TCHFR(TCH Full Rate), TCHHR(TCH Half R SDCCH8(SDCCH8), MBCCH(Main BCCH), CBCCH(Combined BCCH), BCH(BCH), BCCH_CBCH(BCCH+CBCH), SDCCH_CBCH(SDCCH+CBCH), PBCCH_PDTCH(PBCCH+PDTCH), PCCCH_PDTCH(PCCCH+PDTCH), PDTCH(PDTCH), DPDCH(Dynamic PDCH) Unit:None Actual Value Range:TCHFR, TCHHR, SDCCH8, MBCCH, CB BCH, BCCH_CBCH, SDCCH_CBCH, PBCCH_PDTCH, PCCCH_PDTCH, PDTCH, DPDCH Default Value:TCHFR(TCH Full Rate)
BSC6900/BSC6910 SET GCELLHOAD
GBFD- HUAWEI I 110601 Handover
Meaning:This parameter is used to control the proportion of MSs perform enhanced load-based handovers simultaneously. If this parameter is set to N, the BSC selects one MS from N MSs that the conditions for triggering a load-based handover to perform su handover. GUI Value Range:1~16 Unit:None Actual Value Range:1~16 Default Value:3
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:Threshold for triggering load-based PBGT handovers. Lo based PBGT handovers to a candidate cell can be triggered whe path loss in the serving cell minus that in a candidate cell is grea than the value of this parameter. This parameter loosens the requirement of the load-based PBGT handover threshold when th load of the serving cell reaches a specified level. Certain traffic t could not be handed over back to a neighboring cell during PBGT handovers can be handed over now. If this parameter is set to 0, enhanced load-based handovers to the neighboring cell cannot be triggered.The actual value of this parameter equals the GUI value minus 64. GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:0
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to enable the edge handover algorithm. When MS makes a call at the edge of a cell, the call drops if the receiv signal level is too low. To avoid such a call drop, the edge hando algorithm is used. When the uplink signal level of the serving cell less than "Edge HO UL RX_LEV Threshold" or the downlink sign level of the serving cell is less than "Edge HO DL RX_LEV Threshold", the edge handover is triggered. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
79/201
16/7/2015
Handover Feature Parameter Description
EDOUTHOADEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter determines whether a cell supports enha outgoing cell handover. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
EDGELAST1
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:According to the P/N rule, if P out of N MRs meet the conditions for edge handovers, such handovers are triggered. Thi parameter specifies the number P. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:4
EDGESTAT1
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:According to the P/N rule, if P out of N MRs meet the conditions for edge handovers, such handovers are triggered. Thi parameter specifies the number N. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:6
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Level offset for the serving cell when handovers to the e of a neighboring cell are triggered. When both "Enhanced Outgoin Cell Handover Offset" and "EDGE HO Allowed" are set to YES( for a cell, the BSC takes the value of this parameter into account when deciding to trigger an edge handover. That is, handovers to edge of a neighboring cell can be triggered when either of the foll condition is met: Uplink receive level of the serving cell after pow control compensation < Value of "ULEDGETHRES" + Value of t parameter - 64 Downlink receive level of the serving cell after po control compensation < Value of"DLEDGETHRES" + Value of th parameter - 64 In the case of Huawei handover algorithm II, hand to a better neighboring cell can be triggered when both of the follo conditions are met: "Enhanced Outgoing Cell Handover Offset" is to YES(Yes). Receive level of the serving cell after power control compensation < Value of "HOTHRES" - (Value of "LEVHOHYS Value of this parameter - 64). The actual value of this parameter i equal to the GUI value minus 64. GUI Value Range:0~127 Unit:None Actual Value Range:-64~63 Default Value:64
EDOUTHOOFFSET
EDGEADJLASTTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:According to the P/N rule, if a neighbor cell meets the conditions for selecting t he neighbor cell for edge handover in P o measurement reports, the edge handover to the neighbor cell is triggered. This parameter specifies the number P. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:4
EDGEADJSTATTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:According to the P/N rule, if a neighbor cell meets the conditions for selecting t he neighbor cell for edge handover in P o measurement reports, the edge handover to the neighbor cell is triggered. This parameter specifies the number N. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:6
QCKMVHOEN
QCKTIMETH
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to enable the fast moving micro-cell handover algorithm. The fast moving micro-cell handover algorithm enables moving MSs to switch over to macro-cells, thus reducing the han times. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:A t ime threshold determined based on the radius of a ce the moving speed of an MS. If the MS crosses the cell in a time period shorter than this threshold, the BSC concludes that the M quickly passes through the cell. Otherwise, it concludes that the slowly passes the cell. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:15
QCKSTATCNT
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter is used in the P/N criteria decision: If an quickly passes through P out of N micro-cells lately, the BSC en the fast moving micro-cell handover algorithm. This parameter corresponds to the N in the P/N criteria. GUI Value Range:1~10 Unit:None Actual Value Range:1~10 Default Value:3
QCKTRUECNT
BSC6900/BSC6910 SET GCELLHOAD
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter is used in the P/N criteria decision: If an quickly passes through P out of N micro-cells lately, the BSC en the fast moving micro-cell handover algorithm. This parameter corresponds to the P in the P/N criteria.
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
80/201
16/7/2015
Handover Feature Parameter Description Unit:None Actual Value Range:1~10 Default Value:2
LAYER
BSC6900/BSC6910 SET GCELLBASICPARA
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Layer where a cell is located. The network designed by Huawei has four layers: Umbrella (layer 4), Macro (layer 3), Micr (layer 2), and Pico(layer 1). Each layer can be set with 16 prioriti GUI Value Range:1, 2, 3, 4 Unit:None Actual Value Range:1, 2, 3, 4 Default Value:3
PRIOR
BSC6900/BSC6910 SET GCELLBASICPARA
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:This parameter controls handover between cells at the s layer. Generally, the cells at the same layer are set with the sam priority. If the cells at the same layer have different priorities, a c with a small priority value has a high priority. GUI Value Range:PRIOR-1(Priority-1), PRIOR-2(Priority-2), PRI 3(Priority-3), PRIOR-4(Priority-4), PRIOR-5(Priority-5), PRIOR6(Priority-6), PRIOR-7(Priority-7), PRIOR-8(Priority-8), PRIOR9(Priority-9), PRIOR-10(Priority-10), PRIOR-11(Priority-11), PRI 12(Priority-12), PRIOR-13(Priority-13), PRIOR-14(Priority-14), PR 15(Priority-15), PRIOR-16(Priority-16) Unit:None Actual Value Range:PRIOR-1, PRIOR-2, PRIOR-3, PRIOR-4, PRIOR-5, PRIOR-6, PRIOR-7, PRIOR-8, PRIOR-9, PRIOR-10, PRIOR-11, PRIOR-12, PRIOR-13, PRIOR-14, PRIOR-15, PRIO Default Value:PRIOR-1(Priority-1)
BSC6900/BSC6910 ADD GEXT3GCELL MOD GEXT3GCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Layer of the cell. If the layer of the cell is lower, it is mo likely that a handover to the cell will be triggered. GUI Value Range:1, 2, 3, 4 Unit:None Actual Value Range:1, 2, 3, 4 Default Value:3
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to allow inter-layer and inter-level handovers. T inter-layer and inter-level handover algorithm is achieved through setting of different layers and priorities for cells, which switches t to cells of a higher precedence (decided by "Layer of the cell" an "Cell priority" together). GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
CELLLAYER
LEVHOEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
LEVLAST
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:The triggering of inter-layer handovers must meet the P/ criteria. An inter-layer handover is triggered when P of N measur reports meet the condition for inter-layer handovers. This parame corresponds to the P in the P/N criteria. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:6
LEVSTAT
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:The triggering of inter-layer handovers must meet the P/ criteria. An inter-layer handover is triggered when P of N measur reports meet the condition for inter-layer handovers. This parame corresponds to the N in the P/N criteria. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:8
NCELLPUNEN
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Whether to apply penalty on a neighboring cell when the PBGT handover, concentric cell handover, or hierarchical handov handover algorithm I is triggered, or when the better cell handove handover algorithm II is triggered. This prevents a call from experiencing ping-pong handovers. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
NCELLPUNTM
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Length of the timer for performing penalties in a neighbo cell during PBGT, concentric cell handover, or hierarchical hando in the case of Huawei handover algorithm I or during better cell handovers in the case of Huawei handover algorithm II. GUI Value Range:0~255 Unit:s Actual Value Range:0~255 Default Value:10
NCELLPUNLEV
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Level for penalties in a neighboring cell during PBGT, concentric cell handover, or hierarchical handovers in the case of Huawei handover algorithm I or during better cell handovers in th case of Huawei handover algorithm II. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:10
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Meaning:Level threshold used to stop the timer for performing penalties in a neighboring cell during PBGT, concentric cell hand or hierarchical handovers in the case of Huawei handover algorith or during better cell handovers in the case of Huawei handover algorithm II. If the BCCH receive level of the neighboring cell is l
NCELLPUNSTPTH
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
81/201
16/7/2015
Handover Feature Parameter Description an s res o , e pena es w GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:20
e s oppe .
PBGTHOEN
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI I 110601 Handover
Meaning:Whether to use the PBGT handover algorithm. PBGT handovers are based on path loss. The PBGT handover algorith searches in real time for cells that have lower path loss and mee system requirements, and decides whether to perform the hando To avoid ping-pong handovers, PBGT handovers can occur only TCHs and among cells on a same layer and a same priority level GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
PBGTLAST
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:The triggering of PBGT handovers must meet the P/N criteria. A PBGT handover is triggered when P of N measuremen reports meet the condition for PBGT handovers. This parameter corresponds to the P in the P/N criteria. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:6
PBGTSTAT
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:The triggering of PBGT handovers must meet the P/N criteria. A PBGT handover is triggered when P of N measuremen reports meet the condition for PBGT handovers. This parameter corresponds to the N in the P/N criteria. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:8
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI I 110601 Handover
Meaning:Threshold for triggering PBGT handovers. PBGT hando to a neighboring cell c an be triggered when the following conditio met: Path loss in the serving cell - Path loss in the neighboring c Actual value of this parameter If this parameter is set to a value l than 64, calls can be handed over back to a neighboring cell who path loss is greater than that in the serving cell. The actual value this parameter is equal to the GUI value minus 64. GUI Value Range:0~127 Unit:dB Actual Value Range:-64~63 Default Value:68
PBGTMARGIN
INTRACELLFHHOEN
AMRTCHHPRIORALLOW
AMRTCHHPRIORLOAD
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- AMR FR/HR 115504 Dynamic Adjustment
Meaning:Whether to allow AMR handovers. If this parameter is s YES, AMR handovers are allowed. If this parameter is set to NO AMR handovers are not allowed. Setting this parameter to YES o has no impact on dynamic non-AMR TCHF-TCHH handovers. If parameter is set to HOBASECAPANDQUAL, the TCHF-TCHH handover algorithm based on capacity and quality is allowed. GUI Value Range:NO(No), YES(Yes), HOBASECAPANDQUAL(HOBASECAPANDQUAL) Unit:None Actual Value Range:NO, YES, HOBASECAPANDQUAL Default Value:NO(No)
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- AMR HR 115502
Meaning:Whether channels are assigned and TCHF-to-TCHH handover decisions are made on the basis of the AMR TCH/H pr cell load threshold if AMR calls are detected. When this paramet set to ON, the channel assignment algorithm uses the AMR TCH prior cell load threshold to determine whether to assign TCHHs t AMR calls, and Handover algorithm generation 1 uses the AMR TCH/H prior cell load threshold to determine whether to hand ove AMR calls occupying TCHFs to TCHHs; When this parameter is to OFF, the AMR TCH/H prior cell load threshold is not used duri channel assignment, Handover algorithm generation 1 determines whether to hand over AMR calls occupying TCHFs to TCHHs wi considering traffic in the corresponding cell. GUI Value Range:OFF(Off), ON(On) Unit:None Actual Value Range:OFF, ON Default Value:ON(On)
BSC6900/BSC6910 SET GCELLCHMGAD GBFD- AMR HR 115502
Meaning:Load threshold for assigning half rate channels preferent If the current TCH seizure ratio of the cell is greater than or equal this threshold, AMR half rate channels are assigned preferentially GUI Value Range:0~99 Unit:% Actual Value Range:0~99 Default Value:55
ALLOWAMRHALFRATEUSERPERC BSC6900/BSC6910 SET GCELLCHMGBASIC
GBFD- Enhanced 111005 Channel Assignment Algorithm
Meaning:Maximum ratio of the number of AMR half rate channels the total number of channels in a cell. When the resource allocati principle is determined by the BSC, no AMR half rate channel ca further assigned if the ratio of the number of AMR half rate chann the total number of channels in the cell is greater than or equal to value of this parameter. When the resource allocation principle is determined by the BSC , radio resource allocation does not depen the setting of this parameter. Total number of channels = number half rate channels + number of full rate channels x 2 GUI Value Range:0~100 Unit:% Actual Value Range:0~100 Default Value:100
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
82/201
16/7/2015
Handover Feature Parameter Description 115504 Dynamic Adjustment
, rate channel and the value of the Radio Quality Indication (RQI) i measurement report divided by 2 is always higher than the thresh set by this parameter, an intra-cell F-H handover is triggered. GUI Value Range:0~39 Unit:None Actual Value Range:0~39 Default Value:25
INFHHOLAST
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- AMR FR/HR 115504 Dynamic Adjustment
Meaning:The triggering of intra-cell F-H handovers must meet the criteria, that is, when the condition for intra-cell F-H handovers is for P seconds during N seconds, an intra-cell F-H handover is triggered. This parameter corresponds to the P in the P/N criteria. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:8
INFHHOSTAT
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- AMR FR/HR 115504 Dynamic Adjustment
Meaning:The triggering of intra-cell F-H handovers must meet the criteria, that is, when the condition for intra-cell F-H handovers is for P seconds during N seconds, an intra-cell F-H handover is triggered. This parameter corresponds to the N in the P/N criteria GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:10
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- AMR FR/HR 115504 Dynamic Adjustment
Meaning:For an AMR call, if the currently occupied channel is a rate channel and the value of the Radio Quality Indication (RQI) i measurement report divided by 2 is always lower than the thresh set by this parameter, an intra-cell H-F handover is triggered. GUI Value Range:0~39 Unit:None Actual Value Range:0~39 Default Value:16
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
Meaning:Whether to enable a handover between signaling chann GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
INHOH2FTH
SIGCHANHOEN
HUAWEI I Handover HUAWEI II Handover
HOPRETH2G
BSC6900/BSC6910 SET GBFD- HUAWEI I GCELLHOUTRANFDD 110601 Handover GBFD- HUAWEI II 510501 Handover GBFD- GSM/WCDMA 114301 Interoperability GBFD- GSM/TD114302 SCDMA Interoperability
Meaning:If the receive level of the neighboring 2G cell that ranks first in the candidate cell list is equal to or smaller than this thres the BSC preferentially selects a neighboring 3G cell as the hando target cell. Otherwise, the BSC preferentially selects a neighbori cell as the handover target cell. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:25
TALASTTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:The P/N criterion must be met for triggering a TA hando That is, the TA handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditi This parameter corresponds to P in the P/N criterion. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:1
TASTATTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:The P/N criterion must be met for triggering a TA hando That is, the TA handover can be triggered only if P measurement reports among N measurement reports meet the triggering conditi This parameter corresponds to N in the P/N criterion. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~0.8 Default Value:1
LEVHOHYST
BSC6900/BSC6910 SET GCELLHOBASIC GBFD110601 GBFD510501
BQLASTTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for emergen handover are met in P of N measurement reports, the handover i triggered. This parameter specifies the number P. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:1
BQSTATTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for emergen handover are met in P of N measurement reports, the handover i triggered. This parameter specifies the number N. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:1
HUAWEI I Handover HUAWEI II Handover
Meaning:Hysteresis value during the handovers between cells on different layers or of different priorities. This value is used to sup inter-layer ping-pong handovers. Inter-layer handover threshold of serving cell = "Inter-layer HO threshold" - "Inter-layer HO Hyster Inter-layer handover threshold of a neighboring cell = "Inter-layer threshold" + "Adjacent Cell Inter-layer HO Hysteresis" - 64. GUI Value Range:0~63 Unit:dB Actual Value Range:0~63 Default Value:2
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
83/201
16/7/2015
Handover Feature Parameter Description
INTERFERELASTTIME
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:The triggering of interference handovers must meet the criteria, that is, when P out of N measurement reports meet the condition for interference handovers, a concentric circle handover triggered. This parameter corresponds to the P in the P/N criteria. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:2
INTERFERESTATTIME
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:The triggering of interference handovers must meet the criteria, that is, when P out of N measurement reports meet the condition for interference handovers, a concentric circle handover triggered. This parameter corresponds to the N in the P/N criteria GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:3
ULBQLASTTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:Period during which the conditions for handovers withou downlink measurement report. According to the P/N rule, handov without a downlink measurement report can be triggered when th conditions for handovers without a downlink measurement report met for P seconds within N seconds. This parameter specifies P the P/N rule. GUI Value Range:1~8 Unit:0.5s Actual Value Range:0.5~4 Default Value:1
ULBQSTATTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:"This parameter is valid only if "HOCTRLSWITCH" in t "SET GCELLHOBASIC" command is set to HOALGORITHM2(Handover algorithm II) and "NODLMRHOEN" the "SET GCELLHOEMG" command is set to YES(Yes). The parameter value must meet the following requirement: ULBQSTATTIME >= ULBQLASTTIME " GUI Value Range:1~8 Unit:0.5s Actual Value Range:0.5~4 Default Value:1
EDGELAST
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for edge han are met in P of N measurement reports, the handover is triggered This parameter specifies the number P. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:1
EDGESTAT
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for edge han are met in P of N measurement reports, the handover is triggered This parameter specifies the number N. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16 Default Value:1
HCSLASTTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for the hand to a different micro cell due to fast movement are met in P of N measurement reports, the handover is triggered. This parameter specifies the number P. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:2
HCSSTATTIME
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
GBFD- HUAWEI II 510501 Handover
Meaning:According to the P/N rule, if the conditions for the hand to a different micro cell due to fast movement are met in P of N measurement reports, the handover is triggered. This parameter specifies the number N. GUI Value Range:1~16 Unit:0.5s Actual Value Range:0.5~8 Default Value:3
BETTERCELLHOEN
PATHLOSSHOEN
BETTERCELLLASTTIME
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:Whether to enable the algorithm for the handover to a b cell GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:YES(Yes)
BSC6900/BSC6910 SET GCELLHOBASIC GBFD- HUAWEI II 510501 Handover
Meaning:Whether to perform path loss-based sorting in a better c handover algorithm. GUI Value Range:NO(No), YES(Yes) Unit:None Actual Value Range:NO, YES Default Value:NO(No)
BSC6900/BSC6910 ADD G2GNCELL MOD G2GNCELL
Meaning:Period during which the conditions for handovers to a be cell are met. According to the P/N rule, handovers to a better cell be triggered when the conditions for handovers to a better cell ar for P seconds within N seconds. This parameter specifies P in th P/N rule. GUI Value Range:1~32 Unit:0.5s Actual Value Range:0.5~16
GBFD- HUAWEI II 510501 Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
84/201
16/7/2015
Handover Feature Parameter Description
8 Counters Table 8-1 Counter description Counter ID
Counter Name
Counter Description
1278072527
CELL.A.CLR.REQ.TCH.TRAF.HO
CM339B:Clear BSC6900 Requests Sent on the A interface in Handover State (TCH) (Traffic Channel)
GBFD110501 GBFD110601 GBFD510501
Call Control HUAWEI I Handover HUAWEI II Handover
1278073469
CELL.INTRA.CELL.HO.CH.ACT
CR333A:Channel BSC6900 Activation Attempts in Internal Intra-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073470
CELL.INTRABSC.INCELL.HO.CH.ACT
CR334A:Channel BSC6900 Activation Attempts in Incoming Internal InterCell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073471
CELL.INTERBSC.INCELL.HO.CH.ACT
CR335A:Channel BSC6900 Activation Attempts in Incoming External Inter-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073476
CELL.INTRA.CELL.HO.CH.ACT.NACK
CR333B:CHAN ACTIV NACK Messages Sent by BTS in Internal IntraCell Handover Procedure
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073477
CELL.INTRABSC.INCELL.HO.CH.ACT.NACK
CR334B:CHAN ACTIV NACK Messages Sent by BTS in Incoming Internal Inter-Cell Handover Procedure
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073478
CELL.INTERBSC.INCELL.HO.CH.ACT.NACK
CR335B:CHAN ACTIV NACK Messages Sent by BTS in Incoming External Inter-Cell Handover Procedure
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073483
CELL.INTRA.CELL.HO.CH.ACT.EXP
CR333C:Channel BSC6900 Activation Timeouts in Internal Intra-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073484
CELL.INTRABSC.INCELL.HO.CH.ACT.EXP
CR334C:Channel BSC6900 Activation Timeouts in Incoming Internal InterCell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073485
CELL.INTERBSC.INCELL.HO.CH.ACT.EXP
CR335C:Channel BSC6900 Activation Timeouts in Incoming External Inter-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074425
TRX.HO.CMD.SD
R4430A:Attempted Handovers (SDCCH)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278074426
TRX.HO.CMD.TCH
R4439A:Attempted Handovers (TCH)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074427
TRX.HO.CMPL.SD
R4430B:Completed Handovers (SDCCH)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278074428
TRX.HO.CMPL.TCH
R4439B:Completed Handovers (TCH)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074431
TRX.HO.CMD
CR443A:Attempted Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074432
TRX.HO.SUCC
CR443B:Completed
BSC6900
GBFD-
HUAWEI I
110601
Handover
Handovers
NE
Feature ID Feature Name
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
85/201
16/7/2015
Handover Feature Parameter Description 510501
Handover
1278076465
CELL.ASS.FAIL.Frst.DR.NO.CH
A312K:Failed Assignments (First Assignment No Channel Available in Directed Retry Procedure)
BSC6900
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076466
CELL.ASS.FAIL.Frst.DR.EXP
A3129O:Failed Assignments (First Assignment Directed Retry Timed Out)
BSC6900
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076471
CELL.ASS.FAIL.RECONN.SUCC.DR.NO.CH
A312M:Failed Assignments (Reconnection to Old Channels No Channel Available in Directed Retry)
BSC6900
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076472
CELL.ASS.FAIL. RECONN.SUCC.DR.RECONN.SUCC
A3129R:Failed Assignments (Reconnection to Old Channels Reconnection to Old Channel in Directed Retry)
BSC6900
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076473
CELL.ASS.FAIL.RECONN.SUCC.DR.EXP
A3129Q:Failed Assignments (Reconnection to Old Channels Timer Expired in Directed Retry)
BSC6900
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278077417
CELL.INTRACELL.HO.REQ.SD
H3000:Internal IntraCell Handover Requests (SDCCH)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077418
CELL.INTRACELL.HO.REQ.TCH
H3009:Internal IntraCell Handover Requests (TCH)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077419
CELL.INTRACELL.HO.CMD.SD
H3010:Internal Intra- BSC6900 Cell Handover Commands (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077420
CELL.INTRACELL.HO.CMD.TCHF
H3017:Internal IntraCell Handover Commands (TCHF)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077422
CELL.INTRACELL.HO.FAIL.SD
H3020:Failed Internal Intra-Cell Handovers (SDCCH)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077423
CELL.INTRACELL.HO.FAIL.TCH
H3029:Failed Internal Intra-Cell Handovers (TCH)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077424
CELL.INTRACELL.HO.FAIL.CONG.SD
H3020A:Failed Internal BSC6900 Intra-Cell Handovers (No Channel Available) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077425
CELL.INTRACELL.HO.FAIL.CONG.TCH
H3029A:Failed Internal BSC6900 Intra-Cell Handovers (No Channel Available) (TCH)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077426
CELL.INTRACELL.HO.FAIL.APPLY.TRSL.FAIL
H302B:Failed Internal BSC6900 Intra-Cell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077427
CELL.INTRACELL.HO.FAIL.A.INTERF.FAIL
H302G:Failed Internal BSC6900 Intra-Cell Handovers (A Interface Failure)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077428
CELL.INTRACELL.HO.FAIL.EXP.SD
H3020C:Failed Internal BSC6900 Intra-Cell Handovers (Timer Expired) (SDCCH)
GBFD110601 GBFD510501 GBFD-
HUAWEI I Handover HUAWEI II Handover SDCCH
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
86/201
16/7/2015
Handover Feature Parameter Description
1278077429
CELL.INTRACELL.HO.FAIL.EXP.TCHF.SIG
H3027Cb:Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF) (Signaling Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077431
CELL.INTRACELL.HO.FAIL.EXP.TCHF.TRAF
H3027Ca:Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF) (Traffic Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077433
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.UNSPEC
H302Da:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077434
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.CH.UNAC
H302Db:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077435
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.TM.EXP
H302Dc:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077436
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.NO.ACT
H302Dd:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release No Activity on the Radio Path)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077437
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT.RLS
H302De:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077438
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.IMPSBL.TA
H302Df:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077439
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CH.MODEL
H302Dg:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077440
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ.NOT.IMP
H302Dh:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077441
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.CALL.CLR
H302Di:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077442
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.SMN.INCRCT.MSG
H302Dj:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077443
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.INVLID.MAN.INFO
H302Dk:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077444 CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NONEXT
H302Dl:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Message Type Non-existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077445
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NOT.CM
H302Dm:Failed Internal Intra-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077446
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.CDT.IE.ERR
H302Dn:Failed Internal BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
87/201
16/7/2015
Handover Feature Parameter Description Intra-Cell Handovers (Reconnection to Old Channels) (Conditional IE Error)
110601 GBFD510501
Handover HUAWEI II Handover
H302Do:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (No Cell Allocation Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077448 CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.PTCL.ERR.UNSPEC
H302Dp:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077449
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H302Dq:Failed Internal BSC6900 Intra-Cell Handovers (Reconnection to Old Channels) (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077472
CELL.INTRACELL.HO.REQ.AMR.TCHF.TCHH
H3005A:Internal Intra- BSC6900 Cell Handover Requests (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077473
CELL.INTRACELL.HO.REQ.AMR.TCHH.TCHF
H3005B:Internal Intra- BSC6900 Cell Handover Requests (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077474
CELL.INTRACELL.HO.CMD.AMR.TCHF.TCHH
H3015A:Internal Intra- BSC6900 Cell Handover Commands (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077475
CELL.INTRACELL.HO.CMD.AMR.TCHH.TCHF
H3015B:Internal Intra- BSC6900 Cell Handover Commands (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077476
CELL.INTRACELL.HO.FAIL.AMR.TCHF.TCHH
H3025A:Failed Internal BSC6900 Intra-Cell Handovers (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077477
CELL.INTRACELL.HO.FAIL.AMR.TCHH.TCHF
H3025B:Failed Internal BSC6900 Intra-Cell Handovers (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077478
CELL.INTRACELL.HO.DETECT.SD
H3040:Internal IntraCell Handover Detection Messages Received by BSC (SDCCH)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077479
CELL.INTRACELL.HO.DETECT.TCHF
H3047:Internal IntraCell Handover Detection Messages Received by BSC (TCHF)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077481
CELL.INTRACELL.HO.REQ
CH300:Internal IntraCell Handover Requests
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077482
CELL.INTRACELL.HO.SUCC
CH303:Successful Internal Intra-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077483
CELL.INTRACELL.HO.SUCC.RATE
TH303:Success Rate BSC6900 of Internal Intra-Cell Handover
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077486
CELL.INTRACELL.HO.CMD
CH301:Internal IntraCell Handover Commands
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077487
CELL.INTRACELL.HO.DETECT
CH304:Internal IntraCell Handover Detection Messages Received by BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077488
CELL.INTRACELL.HO.FAIL
CH302:Failed Internal BSC6900 Intra-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077489
CELL.INTRACELL.HO.FAIL.CONG
CH302A:Failed Internal Intra-Cell Handovers (No Channel Available)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077490
CELL.INTRACELL.HO.FAIL.EXP
CH302C:Failed Internal Intra-Cell Handovers (Timer Expiry)
BSC6900
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
1278077447
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CELL.ALLOC
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
88/201
16/7/2015
Handover Feature Parameter Description
1278077491
CELL.INTRACELL.HO.FAIL.RECONN.SUCC
CH302D:Failed Internal Intra-Cell Handovers (Reconnection to Old Channels)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077498
CELL.INTRACELL.HO.SUCC.RATE.AMR.TCHF. TCHH
TH3035A:Suc cess Rate of Internal IntraCell Handover (AMR) (TCHF-TCHH)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077499
CELL.INTRACELL.HO.SUCC.RATE.AMR.TCHH.TCHF
TH3035B:Suc cess Rate of Internal IntraCell Handover (AMR) (TCHH-TCHF)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077506
CELL.INTRACELL.HO.SUCC.AMR.TCHF.TCHH
CH3035A:Successful BSC6900 Internal Intra-Cell Handovers (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077507
CELL.INTRACELL.HO.SUCC.AMR.TCHH.TCHF
CH3035B:Successful BSC6900 Internal Intra-Cell Handovers (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077508
CELL.INTRACELL.HO.REQ.UL.INTERFERE
CH3036A:Internal Intra-Cell Handover Requests due to Uplink Intervention
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077509
CELL.INTRACELL.HO.REQ.DL.INTERFERE
CH3036B:Internal Intra-Cell Handover Requests due to Downlink Intervention
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077522
CELL.INTRACELL.HO.FAIL.NO.IDLE.ABIS
H302E:Number of BSC6900 Intra-BSC Intra-Cell Handover Failures Due to No Abis Resources Available
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077523
CELL.INTRACELL.HO.FAIL.NO.SPEECH.VER
H302H:Failed Internal BSC6900 Intra-Cell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077524
CELL.INTRACELL.HO.FAIL.CHACT.FAIL
H302I:Failed Internal Intra-Cell Handovers (Channel Activation Failed)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077525
CELL.TCH.HO.DROP
RH333:Handover Drop BSC6900 Rate of TCH
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077526
CELL.INTRABSC.HO.SUCC.RATE
RH303B:Intra-BSC Handover Success Rate
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077527
CELL.INTRABSC.RD.HO.SUCC.RATE
RH303C:Intra-BSC Radio Handover Success Rate
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078417
CELL.INTRABSC.INCELL.HO.REQ.SD.900.900
H3200W:Number of BSC6900 Incoming Internal InterCell Handover Requests (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078418
CELL.INTRABSC.INCELL.HO.REQ.SD.1800.1800
H3200X:Number of BSC6900 Incoming Internal InterCell Handover Requests (SDCCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078419
CELL.INTRABSC.INCELL.HO.REQ.SD.900.1800
H3200Y:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFDRequests (SDCCH) 510501 (900/850/810GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078420
CELL.INTRABSC.INCELL.HO.REQ.SD.1800.900
H3200Z:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFDRequests (SDCCH) 510501 (1800/1900GBFD900/850/810) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078421
CELL.INTRABSC.INCELL.HO.REQ.TCH.900.900
H3209W:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFD-
HUAWEI I Handover HUAWEI II
Requests (TCH)
Handover
510501
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
89/201
16/7/2015
Handover Feature Parameter Description 900/850/810)
1278078422
CELL.INTRABSC. INCELL.HO.REQ.TCH.1800.1800
H3209X:Number of BSC6900 Incoming Internal InterCell Handover Requests (TCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078423
CELL.INTRABSC.INCELL.HO.REQ.TCH.900.1800
H3209Y:Number of BSC6900 Incoming Internal InterCell Handover Requests (TCH) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078424
CELL.INTRABSC.INCELL.HO.REQ.TCH.1800.900
H3209Z:Number of BSC6900 Incoming Internal InterCell Handover Requests (TCH) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078425
CELL.INTRABSC.INCELL.HO.CMD.SD.900.900
H3210W:Number of BSC6900 Incoming Internal InterCell Handover Responses (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078426
CELL.INTRABSC.INCELL.HO.CMD.SD.1800.1800
H3210X:Number of BSC6900 Incoming Internal InterCell Handover Responses (SDCCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078427
CELL.INTRABSC.INCELL.HO.CMD.SD.900.1800
H3210Y:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFDResponses (SDCCH) 510501 (900/850/810GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078428
CELL.INTRABSC.INCELL.HO.CMD.SD.1800.900
H3210Z:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFDResponses (SDCCH) 510501 (1800/1900GBFD900/850/810) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078429
CELL.INTRABSC.INCELL.HO.CMD.TCHF.900.900
H3217W:Number of BSC6900 Incoming Internal InterCell Handover Responses (TCHF) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078430
CELL.INTRABSC. INCELL.HO.CMD.TCHF.1800.1800
H3217X:Number of BSC6900 Incoming Internal InterCell Handover Responses (TCHF) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078431
CELL.INTRABSC. INCELL.HO.CMD.TCHF.900.1800
H3217Y:Number of BSC6900 Incoming Internal InterCell Handover Responses (TCHF) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078432
CELL.INTRABSC. INCELL.HO.CMD.TCHF.1800.900
H3217Z:Number of BSC6900 Incoming Internal InterCell Handover Responses (TCHF) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078437
CELL.INTRABSC.INCELL.HO.FAIL.SD.900.900
H3220W:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078438
CELL.INTRABSC. INCELL.HO.FAIL.SD.1800. 1800
H3220X:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers 510501 (SDCCH) (1800/1900GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078439
CELL.INTRABSC.INCELL.HO.FAIL.SD.900.1800
H3220Y:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers 510501 (SDCCH) GBFD(900/850/810110608 1800/1900)
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078440
CELL.INTRABSC.INCELL.HO.FAIL.SD.1800.900
H3220Z:Number of
HUAWEI I
BSC6900
GBFD-
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
90/201
16/7/2015
Handover Feature Parameter Description Incoming Internal InterCell Handovers (SDCCH) (1800/1900900/850/810)
GBFD510501 GBFD110608
HUAWEI II Handover SDCCH Handover
1278078441
CELL.INTRABSC.INCELL.HO.FAIL.TCH.900.900
H3229W:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (900/850/810900/850/810)
HUAWEI I Handover HUAWEI II Handover
1278078442
CELL.INTRABSC. INCELL.HO.FAIL.TCH.1800.1800
H3229X:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (TCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078443
CELL.INTRABSC. INCELL.HO.FAIL.TCH.900.1800
H3229Y:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (900/850/8101800/1900)
HUAWEI I Handover HUAWEI II Handover
1278078444
CELL.INTRABSC. INCELL.HO.FAIL.TCH.1800.900
H3229Z:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (1800/1900900/850/810)
HUAWEI I Handover HUAWEI II Handover
1278078445
CELL.INTRABSC.INCELL.HO.FAIL.CONG.SD
H3220A:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (No Channel Available) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078446
CELL.INTRABSC.INCELL.HO.FAIL.CONG.TCH
H3229A:Number of BSC6900 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (No 510501 Channel Available) (TCH)
HUAWEI I Handover HUAWEI II Handover
1278078447
C ELL. IN TR ABSC .I NC ELL. HO. FAI L. APPLY. TRS L. FAI L
H 322B: Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078448
C ELL. IN TR ABSC .I NC ELL. HO. FAI L. REC ON N. SU CC ESS
H 322D :N umber of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Reconnection to Old Channels Canceled)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078449
CELL.INTRABSC. INCELL.HO.FAIL.A.I NTERF.FAIL
H322G:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Failure on A Interface)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078450
CELL.INTRABSC.INCELL.HO.FAIL.EXP.SD
H3220C:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078451
CELL.INTRABSC. INCELL.HO.FAIL.EXP. TCHF.SIG
H3227Cb:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (TCHF) (Signaling Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078453
CELL.INTRABSC. INCELL.HO.FAIL.EXP. TCHF.TRAF
H3227Ca:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (TCHF) (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078455
CELL.INTRABSC.INCELL.HO.DETECT.SD
H3240:Number of BSC6900 GBFDIncoming Internal Inter110601 Cell Handover GBFDDetection Messages 510501 Received by BSC GBFD(SDCCH) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078456
CELL.INTRABSC.INCELL.HO.DETECT.TCHF
H3247:Number of BSC6900 Incoming Internal InterCell Handover Detection Messages Received by BSC (TCHF)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078458
CELL.INTRABSC.INCELL.HO.REQ
CH320:Number of
GBFD-
HUAWEI I
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
91/201
16/7/2015
Handover Feature Parameter Description Cell Handover Requests
GBFD510501
HUAWEI II Handover
1278078459
CELL.INTRABSC.INCELL.HO.SUCC
CH323:Number of Successful Incoming Internal Inter-Cell Handovers
BSC6900
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078460
CELL.INTRABSC.INCELL.HO.SUCC.RATE
TH323:Success Rate BSC6900 of Incoming Internal Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078461
CELL.INTRABSC.INCELL.HO.FAIL
CH322:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078462
CELL.INTRABSC.INCELL.HO.DETECT
CH324:Number of BSC6900 Incoming Internal InterCell Handover Detection Messages Received by BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078463
CELL.INTRABSC.INCELL.HO.REQ.ACK
CH321:Number of BSC6900 Incoming Internal InterCell Handover Responses
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078464
CELL.INTRABSC.INCELL.HO.FAIL.TIMEOUR
CH322C:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078478
CELL.INTRABSC.INCELL.HO.FAIL.NO.IDLE.ABIS
H322M:Number of BSC6900 Unsuccessful Incoming Internal InterCell Handovers (No Abis Resources Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078479
C ELL. IN TR ABSC .I NC ELL. CLEA R. CMD .BEFOR E. HO. CMD
H 325A: Inc oming Internal Inter-Cell Handover Clear Cmd Times (Before Handover Response)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078480
C ELL. IN TR ABSC .I NC ELL. CLEA R. CMD .AFTER .H O. CMD
H 325B: Inc oming BSC6900 Internal Inter-Cell Handover Clear Cmd Times (After Handover Response)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078481
CELL.INTRABSC. INCELL.HO.FAIL.NO.SPEECH.VER
H322H:Failed BSC6900 Incoming Internal InterCell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078482
CELL.INTRABSC. INCELL.HO.FAIL.CHACT.FAIL
H322I: Failed I nc oming BSC6900 Internal Inter-Cell Handovers (Channel Activation Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078483
CELL.HO.SUCC.RATE
RH303:Handover Success Rate
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078484
CELL.RD.HO.SUCC.RATE
RH303A:Success Rate of Radio Handover
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078485
CELL.DOUBLE.FH.HO.SUCC.RATE.900.1800
RH303F:Success Rate of Dual-Band Handovers (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078486
CELL.DOUBLE.FH.HO.SUCC.RATE.1800.900
RH303G:Success Rate of Dual-Band Handovers (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078492
CELL.INTRABSC.INCELL.HO.FAIL.900.1800
RH3031F:Failed BSC6900 Incoming Internal InterCell Handovers (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078493
CELL.INTRABSC.INCELL.HO.FAIL.1800.900
RH3032F:Failed BSC6900 Incoming Internal InterCell Handovers (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078494
CELL.INTERBSC. IN.CELL.HO.FAI L.TIMES.900. 1800
RH3033F:Failed Incoming External Inter-Cell Handovers (900/850/810-
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
92/201
16/7/2015
Handover Feature Parameter Description
1278078495
CELL.INTERBSC. IN.CELL.HO.FAI L.TIMES.1800.900
RH3034F:Failed Incoming External Inter-Cell Handovers (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078496
CELL.INTERBSC.OUTCELL.HO.FAIL.900.1800
RH3035F:Failed Outgoing External Inter-Cell Handovers (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078497
CELL.INTERBSC.OUTCELL.HO.FAIL.1800.900
RH3036F:Failed Outgoing External Inter-Cell Handovers (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078498
CELL.INTRABSC.INCELL.HO.REQ.900.1800
RH3031G:Incoming Internal Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078499
CELL.INTRABSC.INCELL.HO.REQ.1800.900
RH3032G:Incoming Internal Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078500
CELL.INTERBSC. IN.CELL.HO.REQ.TI MES. 900.1800
RH3033G:Inc oming External Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078501
CELL.INTERBSC. IN.CELL.HO.REQ.TI MES. 1800.900
RH3034G:Inc oming External Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078502
CELL.INTERBSC.OUTCELL.HO.REQ.900.1800
RH3035G:Outgoing External Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078503
CELL.INTERBSC.OUTCELL.HO.REQ.1800.900
RH3036G:Outgoing External Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079417
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.900
H3100W:Number of BSC6900 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079418
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.1800
H3100X:Number of BSC6900 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079419
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.1800
H3100Y:Number of BSC6900 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079420
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.900
H3100Z:Number of BSC6900 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079421
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.900.900
H3107W:Number of BSC6900 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079422
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.1800.1800
H3107X:Number of BSC6900 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
H3107Y:Number of
GBFD-
HUAWEI I
1278079423 CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.900.1800
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
93/201
16/7/2015
Handover Feature Parameter Description Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
110601 GBFD510501
Handover HUAWEI II Handover
1278079424
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.1800.900
H3107Z:Number of BSC6900 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079429
CELL.INTRABSC.OUTCELL.HO.REQ.DR.900.900
H3101W:Number of BSC6900 GBFDOutgoing Internal Inter110601 Cell Handover GBFDRequests (Directed 510501 Retry) (900/850/810GBFD900/850/810) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079430
CELL.INTRABSC. OUTCELL.HO.REQ.DR.1800.1800
H3101X:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079431
CELL.INTRABSC. OUTCELL.HO.REQ.DR.900.1800
H3101Y:Number of BSC6900 GBFDOutgoing Internal Inter110601 Cell Handover GBFDRequests (Directed 510501 Retry) (900/850/810GBFD1800/1900) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079432
CELL.INTRABSC. OUTCELL.HO.REQ.DR.1800.900
H3101Z:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079433
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.900
H3110W:Number of BSC6900 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079434
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.1800
H3110X:Number of BSC6900 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079435
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.1800
H3110Y:Number of BSC6900 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079436
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.900
H3110Z:Number of BSC6900 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079437
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.900
H3117W:Number of BSC6900 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079438
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.1800
H3117X:Number of BSC6900 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079439
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.1800
H3117Y:Number of BSC6900 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079440
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.900
H3117Z:Number of BSC6900 Outgoing Internal InterCell Handover Commands (TCHF)
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
94/201
16/7/2015
Handover Feature Parameter Description Retry) (1800/1900900/850/810)
1278079445
CELL.INTRABSC.OUTCELL.HO.CMD.DR.900.900
H3111W:Number of BSC6900 GBFDOutgoing Internal Inter110601 Cell Handover GBFDCommands (Directed 510501 Retry) (900/850/810GBFD900/850/810) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079446
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 1800.1800
H3111X:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079447
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 900.1800
H3111Y:Number of BSC6900 GBFDOutgoing Internal Inter110601 Cell Handover GBFDCommands (Directed 510501 Retry) (900/850/810GBFD1800/1900) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079448
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 1800.900
H3111Z:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079449
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.900
H3120W:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079450
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.1800
H3120X:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079451
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.1800
H3120Y:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079452
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.900
H3120Z:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079453
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.900
H3127W:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079454
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.1800
H3127X:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079455
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.1800
H3127Y:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079456
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.900
H3127Z:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (1800/1900-
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
900/850/810)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
95/201
16/7/2015
Handover Feature Parameter Description
1278079461
CELL.INTRABSC.OUTCELL.HO.FAIL.DR.900.900
H3121W:Number of BSC6900 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Directed Retry) GBFD(900/850/810110607 900/850/810)
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079462
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.1800.1800
H3121X:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079463
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.900.1800
H3121Y:Number of BSC6900 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Directed Retry) GBFD(900/850/810110607 1800/1900)
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079464
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.1800.900
H3121Z:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079465
CELL.INTRABSC.OUTCELL.HO.FAIL.CONG
H312A:Number of Failed Outgoing Internal Inter-Cell Handovers (No Channel Available)
BSC6900 GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079466
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. APP LY. TR SL. FAI L
H 312B: Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079467
CELL.INTRABSC. OUTCELL.HO.FAIL.A.I NTERF.FAIL
H312G:Number of Failed Outgoing Internal Inter-Cell Handovers (A Interface Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079468
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.SD.NOT.INCLUDE.DR
H3120C:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (SDCCH) (Excluding Directed Retry)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079469
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.TCHF.SIG.NOT.INCLUDE.DR
H3127Cb:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (TCHF) (Signaling Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079471
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.TCHF.TRAF.NOT.INCLUDE.DR
H3127Ca:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (TCHF) (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079473
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.DR
H3121C:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079474
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.UN S H312Da:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079475
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.CH N H312Db:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079476
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.EXP H312Dc:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
96/201
16/7/2015
Handover Feature Parameter Description Channels) (Abnormal Release Timer Expired)
1278079477
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.REL.NO.ACT
H312Dd:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release No Activity on the Radio Path)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079478
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT
H312De:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079479
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.TA
H312Df:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079480
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CH.MODE
H312Dg:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079481
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ
H312Dh:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079482
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.C.CLR
H312Di:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079483
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.SEMANT
H312Dj:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079484
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.INV.MAN
H312Dk:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079485
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.M.T.NE
H312Dl:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Non-Existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079486
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.M.T.NC
H312Dm:Number of Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079487
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CONDIT
H312Dn:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Conditional IE Error)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079488
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CA
H312Do:Number of Failed Outgoing
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
Internal Inter-Cell
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
97/201
16/7/2015
Handover Feature Parameter Description (Reconnection to Old Channels) (No Cell Allocation Available)
1278079489
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PROTOCL
H312Dp:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079490
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H312Dq:Number of Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079491
CELL.INTRABSC.OUTCELL.HO.REQ.UL.QLTY
H310A:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079492
CELL.INTRABSC.OUTCELL.HO.REQ.DL.QLTY
H310B:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079493
CELL.INTRABSC.OUTCELL.HO.REQ.UL.RXL
H310C:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079494
CELL.INTRABSC.OUTCELL.HO.REQ.DL.RXL
H310D:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079495
CELL.INTRABSC.OUTCELL.HO.REQ.TA
H310E:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079496
CELL.INTRABSC. OUTCELL.HO.REQ.BETTER.CELL
H310F:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079497
CELL.INTRABSC.OUTCELL.HO.REQ.LOAD
H310G:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079498
C ELL. IN TR ABSC .OU TC ELL. HO. REQ. RAPI D. LEV. DR OP
H 310H :N umber of BSC6900 Outgoing Internal InterCell Handover Requests (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079499
CELL.INTRABSC.OUTCELL.HO.REQ.MSC.INTERVENTION
H310I:Number of BSC6900 Outgoing Internal InterCell Handover Requests (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079500
CELL.INTRABSC.OUTCELL.HO.REQ.OM.INTERVENTION
H310J:Number of BSC6900 Outgoing Internal InterCell Handover Requests (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079502
CELL.INTRABSC.OUTCELL.HO.REQ.OTHER
H310L:Number of BSC6900 Outgoing Internal InterCell Handover Requests (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079503
CELL.INTRABSC.OUTCELL.HO.CMD.UL.QLTY
H311A:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079504
CELL.INTRABSC.OUTCELL.HO.CMD.DL.QLTY
H311B:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079505
CELL.INTRABSC.OUTCELL.HO.CMD.UL.RXL
H311C:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079506
CELL.INTRABSC.OUTCELL.HO.CMD.DL.RXL
H311D:Number of
GBFD-
HUAWEI I
BSC6900
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
98/201
16/7/2015
Handover Feature Parameter Description Cell Handover Commands (Downlink Strength)
GBFD510501
HUAWEI II Handover
1278079507
CELL.INTRABSC.OUTCELL.HO.CMD.TA
H311E:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079508
CELL.INTRABSC. OUTCELL.HO.CMD. BETTER. CELL
H311F:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079509
CELL.INTRABSC.OUTCELL.HO.CMD.LOAD
H311G:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079510
C ELL. IN TR ABSC .OU TC ELL. HO. CMD .RA PI D. LE V. DR OP
H 311H :N umber of BSC6900 Outgoing Internal InterCell Handover Commands (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079511
CELL.INTRABSC.OUTCELL.HO.CMD.MSC.INTERVENTION
H311I:Number of BSC6900 Outgoing Internal InterCell Handover Commands (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079512
CELL.INTRABSC.OUTCELL.HO.CMD.OM.INTERVENTION
H311J:Number of BSC6900 Outgoing Internal InterCell Handover Commands (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079514
CELL.INTRABSC.OUTCELL.HO.CMD.OTHER
H311L:Number of BSC6900 Outgoing Internal InterCell Handover Commands (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079515
CELL.INTRABSC.OUTCELL.HO.FAIL.UL.QLTY
H3122A:Number of BSC6900 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Uplink Quality)
HUAWEI I Handover HUAWEI II Handover
1278079516
CELL.INTRABSC.OUTCELL.HO.FAIL.DL.QLTY
H3122B:Number of BSC6900 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Downlink Quality)
HUAWEI I Handover HUAWEI II Handover
1278079517
CELL.INTRABSC.OUTCELL.HO.FAIL.UL.RXL
H3122C:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079518
CELL.INTRABSC.OUTCELL.HO.FAIL.DL.RXL
H3122D:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079519
CELL.INTRABSC.OUTCELL.HO.FAIL.TA
H3122E:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timing Advance)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079520
CELL.INTRABSC. OUTCELL.HO.FAIL.BETTER.CELL
H3122F:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079521
CELL.INTRABSC.OUTCELL.HO.FAIL.LOAD
H3122G:Number of Failed Outgoing Internal Inter-Cell Handovers (Load)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079522
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. RAPI D. LEV. DR OP
H 3122H :N umber of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079523
CELL.INTRABSC.OUTCELL.HO.FAIL.MSC.INTERVENTION
H3122I:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079524
CELL.INTRABSC.OUTCELL.HO.FAIL.OM.INTERVENTION
H3122J:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079526
CELL.INTRABSC.OUTCELL.HO.FAIL.OTHER
H3122L:Number of
GBFD-
HUAWEI I
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
99/201
16/7/2015
Handover Feature Parameter Description Unsuccessful Outgoing Internal InterCell Handovers (Other Causes)
110601 GBFD510501
Handover HUAWEI II Handover
1278079527
CELL.INTRABSC.OUTCELL.HO.REQ
CH310:Number of BSC6900 Outgoing Internal InterCell Handover Requests
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079528
CELL.INTRABSC.OUTCELL.HO.SUCC
CH313:Number of Successful Outgoing Internal Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079529
CELL.INTRABSC.OUTCELL.HO.FAIL
CH312:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079530
CELL.INTRABSC.OUTCELL.HO.SUCC.RATE
TH313:Success Rate BSC6900 of Outgoing Internal Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079531
CELL.INTRABSC.OUTCELL.HO.CMD
CH311:Number of BSC6900 Outgoing Internal InterCell Handover Commands
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079532
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP
CH312C:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079533
CELL.INTRABSC. OUTCELL.HO.FAIL.RECONN.SUCC
CH312D:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Reconnection to Old Channels)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079544
CELL.INTRABSC. OUTCELL.HO.FAIL.NO.IDLE.ABIS
H312L:Number of BSC6900 Intra-BSC Outgoing Cell Handover Failures Due to No Abis Resources Available
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079554
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. NO. SPEE CH .VER
H 312H :N umber of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079555
CELL.INTRABSC.OUTCELL.HO.FAIL.CHACT.FAIL
H312I:Number of BSC6900 Unsuccessful Outgoing Internal InterCell Handovers (Channel Activation Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080417
CELL.INTERBSC.INCELL.HO.REQ.SD.900.900
H3400W:Incoming External Inter-Cell Handover Requests (SDCCH) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080418
CELL.INTERBSC.INCELL.HO.REQ.SD.1800.1800
H3400X:Incoming BSC6900 External Inter-Cell Handover Requests (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080419
CELL.INTERBSC.INCELL.HO.REQ.SD.900.1800
H3400Y:Incoming External Inter-Cell Handover Requests (SDCCH) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080420
CELL.INTERBSC.INCELL.HO.REQ.SD.1800.900
H3400Z:Incoming BSC6900 External Inter-Cell Handover Requests (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080421
CELL.INTERBSC.INCELL.HO.REQ.TCH.900.900
H3409W:Incoming External Inter-Cell Handover Requests (TCH) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080422
CELL.INTERBSC. INCELL.HO.REQ.TCH.1800.1800
H3409X:Incoming External Inter-Cell Handover Requests (TCH) (1800/1900-
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
100/201
16/7/2015
Handover Feature Parameter Description
1278080423
CELL.INTERBSC.INCELL.HO.REQ.TCH.900.1800
H3409Y:Incoming External Inter-Cell Handover Requests (TCH) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080424
CELL.INTERBSC.INCELL.HO.REQ.TCH.1800.900
H3409Z:Incoming External Inter-Cell Handover Requests (TCH) (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080425
CELL.INTERBSC.INCELL.HO.CMD.SD.900.900
H3410W:Incoming External Inter-Cell Handover Responses (SDCCH) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080426
CELL.INTERBSC.INCELL.HO.CMD.SD.1800.1800
H3410X:Incoming BSC6900 External Inter-Cell Handover Responses (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080427
CELL.INTERBSC.INCELL.HO.CMD.SD.900.1800
H3410Y:Incoming External Inter-Cell Handover Responses (SDCCH) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080428
CELL.INTERBSC.INCELL.HO.CMD.SD.1800.900
H3410Z:Incoming BSC6900 External Inter-Cell Handover Responses (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080429
CELL.INTERBSC.INCELL.HO.CMD.TCHF.900.900
H3417W:Incoming External Inter-Cell Handover Responses (TCHF) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080430
CELL.INTERBSC. INCELL.HO.CMD.TCHF.1800.1800
H3417X:Incoming External Inter-Cell Handover Responses (TCHF) (1800/19001800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080431
CELL.INTERBSC. INCELL.HO.CMD.TCHF.900.1800
H3417Y:Incoming External Inter-Cell Handover Responses (TCHF) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080432
CELL.INTERBSC. INCELL.HO.CMD.TCHF.1800.900
H3417Z:Incoming External Inter-Cell Handover Responses (TCHF) (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080437
CELL.INTERBSC.INCELL.HO.FAIL.SD.900.900
H3420W:Failed Incoming External Inter-Cell Handovers (SDCCH) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080438
CELL.INTERBSC.INCELL.HO.FAIL.SD.1800.1800
H3420X:Failed BSC6900 Incoming External Inter-Cell Handovers (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080439
CELL.INTERBSC.INCELL.HO.FAIL.SD.900.1800
H3420Y:Failed Incoming External Inter-Cell Handovers (SDCCH) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080440
CELL.INTERBSC.INCELL.HO.FAIL.SD.1800.900
H3420Z:Failed BSC6900 Incoming External Inter-Cell Handovers (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080441
CELL.INTERBSC.INCELL.HO.FAIL.TCH.900.900
H3429W:Failed Incoming External Inter-Cell Handovers (TCH) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080442
CELL.INTERBSC.INCELL.HO.FAIL.TCH.1800.1800
H3429X:Failed
BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
101/201
16/7/2015
Handover Featur e Par am eter Descr iption Inter-Cell Handovers (TCH) (1800/19001800/1900)
GBFD510501
HUAWEI II Handover
1278080443
CELL.INTERBSC. INCELL.HO.FAIL.TCH.900.1800
H3429Y:Failed Incoming External Inter-Cell Handovers (TCH) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080444
CELL.INTERBSC. INCELL.HO.FAIL.TCH.1800.900
H3429Z:Failed Incoming External Inter-Cell Handovers (TCH) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080453
CEL CELL.INT .INTER ERBS BSC. C.IN INCE CELLL.HO .HO.FAI .FAILL.CO .CONTEN NTENT TS.IN S.INVA VALLID
H34 H342I:F I:Faile iled Inco Incomi minng BSC6 BSC690 9000 External Inter-Cell Handovers (Invalid Message)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080454
CELL.INTERBSC. INCELL.HO.FAIL.CONG.SD
H3420A:Failed BSC6 BSC690 9000 Incoming External Inter-Cell Handovers (No Channel Available) (SDCCH)
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080455
CELL.INTERBSC. INCELL.HO.FAIL.CONG.TCH
H3429A:Failed BSC6 BSC690 9000 Incoming External Inter-Cell Handovers (No Channel Available) (TCH)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080456
CELL.INTERBSC. INCELL.HO.FAIL.NO.CIC
H342E: Failed Incoming External Inter-Cell Handovers (CIC Unavailable)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080457
CELL.INTERBSC. INCELL.HO.FAIL.CIC.AVAIL
H342F:Failed Incoming External Inter-Cell Handovers (CIC Allocated)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080458
CELL.INTERBSC. IN INCELL.HO.FAIL.APPLY.TRSL.FAIL
H342B: Fa Failed Incoming External Inter-Cell Handovers (Terrestrial Resource Request Failed)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080459
CELL.INTERBSC. INCELL.HO.FAIL.MSC.CLR.CMD
H342H:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080460
CELL.INTERBSC. INCELL.HO.FAIL.EXP. SD
H3420C:Failed Incoming External Inter-Cell Handovers (Timer Expired) (SDCCH)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080461
CELL.INTERBSC. INCELL.HO.FAIL.EXP. TCH.SIG
H3429Cb:Failed BSC6 BSC690 9000 Incoming External Inter-Cell Handovers (Timer Expired) (TCH) (Signaling Channel)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080462
CELL.INTERBSC. IN INCELL.HO.FAIL.EXP. TC TCH.TRAF
H3429Ca:Failed BSC6 BSC690 9000 Incoming External Inter-Cell Handovers (Timer Expired) (TCH) (Traffic Channel)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080463
CELL.INTERBSC. INCELL.HO.DETECT. SD
H3440:Incoming External Inter-Cell Handover Detection Messages Received by BSC (SDCCH)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080464
CELL.INTERBSC. INCELL.HO.DETECT. TCHF
H3447:Incoming External Inter-Cell Handover Detection Messages Received by BSC (TCHF)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080466
CELL.INTERBSC. INCELL.HO.REQ
CH340:Inc oming External Inter-Cell Handover Requests
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080467
CELL.INTERBSC. INCELL.HO.SUCC
CH343:Succ ess ful Incoming External Inter-Cell Handovers
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080468
CELL.INTERBSC. INCELL.HO.REQ.ACK
CH341:Inc oming External Inter-Cell
BSC6 BSC690 9000
GBFD GBFD-110601
HUAWEI I Handover
GBFD-
HUAWEI II
Handover Responses
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
102/20 102 /2011
16/7/2015
Handover Featur e Par am eter Descr iption
1278080469
CELL.INTERBSC. INCELL.HO.SUCC.RATE
TH343:Suc ces s Rate BSC6 BSC690 9000 of Incoming External Inter-Cell Handovers
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080471
CELL.INTERBSC. INCELL.HO.DETECT
CH344:Inc oming External Inter-Cell Handover Detection Messages Received by BSC
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080472
CELL.INTERBSC. INCELL.HO.FAIL
CH342:Failed Incoming External Inter-Cell Handovers
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080473
CELL.INTERBSC. INCELL.HO.FAIL.EXP
CH342C:Failed Incoming External Inter-Cell Handovers (Timer Expired)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080476
CELL.INTERBSC. INCELL.HO.REQ.BETTER.CELL
CH346:Inc oming External Inter-Cell Handover Requests(Better Cell)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080477
CELL.INCELL.HO.REQ.TA
CH347:Inc oming I nter- BSC6 BSC690 9000 Cell Handover Requests (Timing Advance)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080478
CELL.INTERBSC. INCELL.HO.FAIL.NO.IDLE.ABIS
H342L:Number of BSC6 BS C690 9000 Incoming BSC Handover Failures (No Abis Resources Available)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080479
C EL ELL. IN IN TE TER BS BSC ..II N NC C EL ELL. H HO O. FA FAI L. L. N NO O. SP SPEE CH CH ..V V ER ER
H 33442J :F :Fail ed ed I nc nc om omi ng ng BSC6 BSC690 9000 External Inter-Cell Handovers (Requested Speech Version Unavailable)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080482
CELL.INTERBSC. INTO.CELL.RD.HO.SUCC.RATE
RH303D:Succ es s Rate of Incoming External Inter-Cell Radio Handovers
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080485
CEL CELL.IN L.INTE TERB RBSC SC.IN .INCE CELLL.HO L.HO.F .FAI AIL. L.MS MSC. C.CL CLR. R.CM CMD. D.UM UM.M .MSG SG.F .FAI AILL
H342 H342HA HA:F :Faailed iled Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio Interface Message Failure)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080486
CEL CELL.INT .INTER ERBS BSC. C.IN INCE CELLL.HO .HO.FAI .FAILL.MSC .MSC.C .CLLR.CM R.CMD. D.UM UM.F .FAI AILL
H34 H342HB:F HB:Faaile iled Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(Radio interface failure)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080487
CELL.INTERBSC. IN INCELL.HO.FAIL.MSC.CLR.CMD.OM
H342HC:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(O and M intervention)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080488
CEL CELL.INT .INTER ERBS BSC. C.IN INCE CELLL.HO .HO.FAI .FAILL.MSC .MSC.C .CLLR.CM R.CMD. D.EQ EQP. P.FA FAIL IL
H34 H342HD:F HD:Faaile iled Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Equipment failure)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080489
CEL CELL.IN L.INTE TERB RBSC SC.IN .INCE CELLL.HO L.HO.F .FAI AIL. L.MS MSC. C.CL CLR. R.CM CMD. D.PR PREE EEMP MPTI TION ON
H342 H342HE HE:F :Faailed iled Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Preemption)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080490
CEL CELL.IN L.INTE TERB RBSC SC.IN .INCE CELLL.HO L.HO.F .FAI AIL. L.MS MSC. C.CL CLR. R.CM CMD. D.IN INVA VAIL ILD. D.MS MSG G
H342 H342HF HF:F :Faailed iled Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(Invalid message contents)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080491
CELL. CELL.INT INTERB ERBSC. SC.INC INCEL ELL. L.HO HO.F .FAIL AIL.MS .MSC.C C.CLR LR.CM .CMD.P D.PRO ROTO TOCO COL. L.ERR ERR
H342 H342HG HG:Fa :Faile iledd Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Protocol Error between BSS and MSC)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080492
C EL ELL. IN IN TE TER BS BSC ..II N NC C EL ELL. H HO O. FA FAI L. L. MS MSC ..C C LLR R ..C CM MD D ..O OTH ER ER ..F FAI L
H 33442H H: H: Fa Fail ed ed
BSC 669900
GBFD-
H UA UAW EI EI I
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
103/20 103 /2011
16/7/2015
Handover Featur e Par am eter Descr iption Inter-Cell Handovers (Clear Commands Sent By MSC)(Other)
GBFD510501
HUAWEI II Handover
1278081417
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.RE .REQ. Q.SD. SD.NO NOT. T.INC INCLU LUDE. DE.DR. DR.90 900. 0.90 9000
H330 H3300W 0W:O :Out utgo goin ingg External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081418
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.REQ REQ.SD.N .SD.NOT OT.INCL .INCLUDE.D UDE.DR.18 R.1800 00.18 .1800 00
H3300 H3300X:O X:Outg utgoin oingg BSC6 BSC690 9000 External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081419
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.RE .REQ. Q.SD. SD.NO NOT. T.INC INCLU LUDE. DE.DR. DR.90 900. 0.18 1800 00
H330 H3300Y 0Y:O :Out utgo goin ingg External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081420
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.RE .REQ. Q.SD. SD.NO NOT. T.INC INCLU LUDE. DE.DR. DR.18 1800 00.9 .900 00
H330 H3300Z 0Z:O :Out utgo goin ingg External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081421
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.CM .CMD.S D.SD.N D.NOT OT.IN .INCL CLUDE UDE.DR .DR.9 .900 00.9 .900 00
H331 H3310W 0W:O :Out utgo goin ingg External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081422
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.CMD.S CMD.SD.NO D.NOT.IN T.INCLU CLUDE.DR DE.DR.18 .1800 00.18 .1800 00
H3310 H3310X:O X:Outg utgoin oingg BSC6 BSC690 9000 External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081423
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.CM .CMD.S D.SD.N D.NOT OT.IN .INCL CLUDE UDE.DR .DR.9 .900 00.1 .180 8000
H331 H3310Y 0Y:O :Out utgo goin ingg External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081424
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.CM .CMD.S D.SD.N D.NOT OT.IN .INCL CLUDE UDE.DR .DR.1 .180 800. 0.90 9000
H331 H3310Z 0Z:O :Out utgo goin ingg External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081425
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.CMD.T CMD.TCHF. CHF.NOT NOT.INCL .INCLUDE.D UDE.DR.90 R.900.9 0.900 00
H3317 H3317W:Ou W:Outgo tgoing ing External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081426
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.CMD.T CMD.TCHF. CHF.NOT NOT.INCL .INCLUDE.D UDE.DR.18 R.1800 00.18 .1800 00
H3317 H3317X:O X:Outg utgoin oingg BSC6 BSC690 9000 External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081427
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.CMD.T CMD.TCHF. CHF.NOT NOT.INCL .INCLUDE.D UDE.DR.90 R.900.1 0.180 8000
H3317 H3317Y:O Y:Outg utgoin oingg External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081428
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.CMD.T CMD.TCHF. CHF.NOT NOT.INCL .INCLUDE.D UDE.DR.18 R.1800 00.90 .9000
H3317 H3317Z:O Z:Outg utgoin oingg External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081433
CELL.INTERBSC. OUTCELL.HO.CMD. DR. 900.900
H3311W:Outgoing External Inter-Cell Handover Commands (Directed Retry)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
GBFD-
Direct Retry
(900/850/810-
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
104/20 104 /2011
16/7/2015
Handover Featur e Par am eter Descr iption
1278081434
CELL.INTERBSC. OU OUTCELL.HO.CMD. DR DR. 18 1800.1800
H3311X:Out go going BSC6 BSC690 9000 External Inter-Cell Handover Commands (Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081435
CELL.INTERBSC. OU OUTCELL.HO.CMD. DR DR. 90 900.1800
H3311Y:Out go going External Inter-Cell Handover Commands (Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081436
CELL.INTERBSC. OU OUTCELL.HO.CMD. DR DR. 18 1800.900
H3311Z:Outgoing External Inter-Cell Handover Commands (Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081437
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.F .FAIL AIL.SD .SD.NO .NOT.I T.INCL NCLUDE UDE.DR .DR.9 .900 00.9 .900 00
H332 H3320W 0W:Fa :Faile iledd Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081438
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.FAI FAIL.S L.SD.NO D.NOT.INC T.INCLUD LUDE.DR. E.DR.18 1800 00.18 .1800 00
H3320 H3320X:F X:Fail ailed ed BSC6 BSC690 9000 Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081439
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.F .FAIL AIL.SD .SD.NO .NOT.I T.INCL NCLUDE UDE.DR .DR.9 .900 00.1 .180 8000
H332 H3320Y 0Y:F :Fai aile ledd Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081440
CELL. CELL.INT INTERB ERBSC. SC.OU OUTCE TCELL LL.HO .HO.F .FAIL AIL.SD .SD.NO .NOT.I T.INCL NCLUDE UDE.DR .DR.1 .180 800. 0.90 9000
H332 H3320Z 0Z:Fa :Faile iledd Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081441
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.FAI FAIL.T L.TCHF.N CHF.NOT OT.INCL .INCLUDE.D UDE.DR.9 R.900 00.90 .9000
H3327 H3327W:Fa W:Faile iledd Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081442
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.FAI FAIL.T L.TCHF.N CHF.NOT OT.INCL .INCLUDE.D UDE.DR.1 R.180 800.1 0.180 8000
H3327 H3327X:F X:Fail ailed ed BSC6 BSC690 9000 Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081443
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.FAI FAIL.T L.TCHF.N CHF.NOT OT.INCL .INCLUDE.D UDE.DR.9 R.900 00.18 .1800 00
H3327 H3327Y:F Y:Fail ailed ed Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081444
CELL.IN CELL.INTER TERBSC.O BSC.OUTCE UTCELL LL.HO. .HO.FAI FAIL.T L.TCHF.N CHF.NOT OT.INCL .INCLUDE.D UDE.DR.1 R.180 800.9 0.900 00
H3327 H3327Z:F Z:Fai ailed led Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081449
CELL.INTERBSC. OUTCELL.HO.FAIL.DR.900.900
H3321W:Failed Outgoing External Inter-Cell Handovers (Directed Retry) (900/850/810900/850/810)
BSC6 BSC690 9000
GBFD GBFD-110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081450
CELL.INTERBSC. OU OUTCELL.HO.FAIL.DR.1800.1800
H3321X:Failed BSC6 BSC690 9000 Outgoing External Inter-Cell Handovers (Directed Retry) (1800/1900-1800/1900)
GBFD GBFD-110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081451
CELL.INTERBSC. OUTCELL.HO.FAIL.DR.900.1800
H3321Y:Failed
GBFD GBFD--
HUAWEI I
110601
Handover
Outgoing External
BSC6 BSC690 9000
http://12 http://127.0 7.0.0.1 .0.1:52 :52199 199/he /hede dex/pag x/pages/GEC02 es/GEC02287 287/01 /01/GEC02 /GEC02287 287/01 /01/resources/en /resources/en-us_bo -us_bookmap_ okmap_00 00009 009210 21086. 86.html?ft=0&id=GEC0228 html?ft=0&id=GEC02287_ 7_01_ 01_100 10060 60
105/20 105 /2011
16/7/2015
Handover Feature Parameter Description (Directed Retry) (900/850/8101800/1900)
510501 GBFD110607
Handover Direct Retry
1278081452
CELL.INTERBSC.OUTCELL.HO.FAIL.DR.1800.900
H3321Z:Failed Outgoing External Inter-Cell Handovers (Directed Retry) (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081453
CELL.INTERBSC.OUTCELL.HO.REQ.UL.QLTY
H330A:Outgoing External Inter-Cell Handover Requests (Uplink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081454
CELL.INTERBSC.OUTCELL.HO.REQ.DL.QLTY
H330B:Outgoing External Inter-Cell Handover Requests (Downlink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081455
CELL.INTERBSC.OUTCELL.HO.REQ.UL.RXL
H330C:Outgoing External Inter-Cell Handover Requests (Uplink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081456
CELL.INTERBSC.OUTCELL.HO.REQ.DL.RXL
H330D:Outgoing External Inter-Cell Handover Requests (Downlink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081457
CELL.INTERBSC.OUTCELL.HO.REQ.TA
H330E:Outgoing External Inter-Cell Handover Requests (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081458
CELL.INTERBSC. OUTCELL.HO.REQ.BETTER.CELL
H330F:Outgoing External Inter-Cell Handover Requests (Better Cell)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081459
CELL.INTERBSC.OUTCELL.HO.REQ.LOAD
H330G:Outgoing External Inter-Cell Handover Requests (Load)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081460
C ELL. IN TER BSC .OU TC ELL. HO. REQ. RAPI D. LEV. DR OP
H 330H :Out going External Inter-Cell Handover Requests (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081461
CELL.INTERBSC.OUTCELL.HO.REQ.MSC.INTERVENTION
H330I:Outgoing External Inter-Cell Handover Requests (MSC Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081462
C ELL. IN TER BSC .OU TC ELL. HO. REQ. OM. IN TER VEN TI ON
H 330J :Out going External Inter-Cell Handover Requests (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081464
CELL.INTERBSC.OUTCELL.HO.REQ.OTHER
H330L:Outgoing External Inter-Cell Handover Requests (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081465
CELL.INTERBSC.OUTCELL.HO.CMD.UL.QLTY
H331A:Outgoing External Inter-Cell Handover Commands (Uplink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081466
CELL.INTERBSC.OUTCELL.HO.CMD.DL.QLTY
H331B:Outgoing External Inter-Cell Handover Commands (Downlink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081467
CELL.INTERBSC.OUTCELL.HO.CMD.UL.RXL
H331C:Outgoing External Inter-Cell Handover Commands (Uplink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081468
CELL.INTERBSC.OUTCELL.HO.CMD.DL.RXL
H331D:Outgoing External Inter-Cell Handover Commands (Downlink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081469
CELL.INTERBSC.OUTCELL.HO.CMD.TA
H331E:Outgoing External Inter-Cell Handover Commands (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081470
CELL.INTERBSC. OUTCELL.HO.CMD. BETTER. CELL
H331F:Outgoing External Inter-Cell Handover Commands (Better Cell)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081471
CELL.INTERBSC.OUTCELL.HO.CMD.LOAD
H331G:Outgoing External Inter-Cell Handover Commands
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
(Load)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
106/201
16/7/2015
Handover Feature Parameter Description
1278081472
C ELL. IN TER BSC .OU TC ELL. HO. CMD .RA PI D. LE V. DR OP
H 331H :Out going External Inter-Cell Handover Commands (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081473
CELL.INTERBSC.OUTCELL.HO.CMD.MSC.INTERVENTION
H331I:Outgoing External Inter-Cell Handover Commands (MSC Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081474
CELL.INTERBSC.OUTCELL.HO.CMD.OM.INTERVENTION
H331J:Outgoing External Inter-Cell Handover Commands (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081476
CELL.INTERBSC.OUTCELL.HO.CMD.OTHER
H331L:Outgoing External Inter-Cell Handover Commands (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081477
CELL.INTERBSC.OUTCELL.HO.FAIL.UL.QLTY
H3322A:Failed Outgoing External Inter-Cell Handovers (Uplink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081478
CELL.INTERBSC.OUTCELL.HO.FAIL.DL.QLTY
H3322B:Failed Outgoing External Inter-Cell Handovers (Downlink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081479
CELL.INTERBSC.OUTCELL.HO.FAIL.UL.RXL
H3322C:Failed Outgoing External Inter-Cell Handovers (Uplink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081480
CELL.INTERBSC.OUTCELL.HO.FAIL.DL.RXL
H3322D:Failed Outgoing External Inter-Cell Handovers (Downlink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081481
CELL.INTERBSC.OUTCELL.HO.FAIL.TA
H3322E:Failed Outgoing External Inter-Cell Handovers (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081482
CELL.INTERBSC. OUTCELL.HO.FAIL.BETTER.CELL
H3322F:Failed Outgoing External Inter-Cell Handovers (Better Cell)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081483
CELL.INTERBSC.OUTCELL.HO.FAIL.LOAD
H3322G:Failed Outgoing External Inter-Cell Handovers (Load)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081484
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. RAPI D. LEV. DR OP
H 3322H :Failed Outgoing External Inter-Cell Handovers (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081485
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.INTERVENTION
H3322I:Failed Outgoing External Inter-Cell Handovers (MSC Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081486
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. OM. IN TER VE NTI ON
H 3322J :Fai led Outgoing External Inter-Cell Handovers (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081488
CELL.INTERBSC.OUTCELL.HO.FAIL.OTHER
H3322L:Failed Outgoing External Inter-Cell Handovers (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081489
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.OM.INTERVENTION
H332Ka:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081490
CELL.INTERBSC. OUTCELL.HO.REQ.REJ .EQUIP.FAI L
H332Kb:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Equipment Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081491
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .N O. RAD IO. RES
H 332Kc :Fail ed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (No Radio Resource Available)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081492
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.REQ.NO.TER.RES
H332Kd:Failed Outgoing External Inter-Cell Handovers (Handover Request
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Rejected) (Requested
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
107/201
16/7/2015
Handover Feature Parameter Description Unavailable)
1278081493
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.BSS.NOT.EQUIP
H332Ke:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (BSS not Equipped)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081494
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .I NVALI D. CELL
H 332Kf :Failed BSC6900 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Invalid Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081495
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.REQ.TRANS.NO.ADAPT
H332Kg:Failed BSC6900 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Requested Transcoding/Rate Adaption Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081496
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.CIRCUIT.POOL.MISMATCH
H332Kh:Failed BSC6900 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Circuit Pool Mismatch)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081497
CELL.INTERBSC. OUTCELL.HO.REQ.REJ .REQ.NO.SV
H332Ki:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Requested Speech Version Unavailable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081498
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.CIPH.ALG.NOT.SUPPORT
H332Kj:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Ciphering Algorithm not Supported)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081499
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.TER.CIR.ALLOC
H332Kk:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Terrestrial Circuit Already Allocated)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081500
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .I NVALI D. MS G
H 332Kl :Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Invalid Message)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081501
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.PROTOCOL.ERR
H332Km:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Protocol Error between BSS and MSC)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081502
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.OTHER
H332Kn:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081503 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN. SUCC.MS.R PT.ABNORM.REL.UNS H332Da:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081504 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.CH N H332Db:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081505
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.EXP H332Dc:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Timer Expired)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081506
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.REL.NO.ACT
BSC6900
GBFD-
HUAWEI I
110601
Handover
H332Dd:Failed Outgoing External
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
108/201
16/7/2015
Handover Feature Parameter Description (Reconnection to Old Channels) (Abnormal Release No Activity on the Radio Path)
510501
Handover
1278081507
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT
H332De:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081508
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.TA
H332Df:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081509
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CH.MODE
H332Dg:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081510
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ
H332Dh:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081511
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CALL.CLR
H332Di:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081512
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.SEMANT
H332Dj:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081513
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.INVALID.MAN
H332Dk:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081514 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN. SUCC.MS.R PT.MSG.TYPE.NEXIST H332Dl:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Non-Existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081515
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NC
H332Dm:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081516
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CONDIT
H332Dn:Failed BSC6900 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Conditional IE Error)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081517
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CA
H332Do:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (No Cell Allocation Available)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081518
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PROTOCL
H332Dp:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081519
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H332Dq:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081520
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.RADIO.INTF.MSG.FAIL
H332Ha:Failed
BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
109/201
16/7/2015
Handover Feature Parameter Description Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio Interface Message Failure)
GBFD510501
HUAWEI II Handover
1278081521
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.RADIO.INTF.FAIL
H332Hb:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio Interface Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081522
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.OM.INTERVENTION
H332Hc:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081523
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.EQUIP.FAIL
H332Hd:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Equipment Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081524
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.PREEMPTION
H332He:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Preemption)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081525
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.INVALID.MSG
H332Hf:Failed BSC6900 Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Invalid Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081526
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.PROTOCOL.ERR
H332Hg:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Protocol Error between BSS and MSC)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081527
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. MSC .C LR .OTH ER
H 332H h: Failed BSC6900 Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081528
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.A.INTF.FAIL
H332G:Failed Outgoing External Inter-Cell Handovers (A Interface Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081529
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.SD.NOT.INCLUDE.DR
H3320L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (SDCCH) (Excluding Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081530
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. T7. EXP .TC HF. SI G
H 3327Lb: Fail ed Outgoing External Inter-Cell Handovers (T7 Expiry) (TCHF) (Signaling Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081532
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.TCHF.TRAF.CH
H3327La:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (TCHF) (Traffic Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081534
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.DR
H3321L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081535
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.SD.NOT.INCLUDE.DR
H3320C:Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (SDCCH) (Excluding Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081536
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. T8. EXP .TC HF. SI G
H 3327C b: Fai led Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF) (Signaling Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081538
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.TCHF.TRAF.CH
H3327Ca:Failed Outgoing External
BSC6900
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
110/201
16/7/2015
Handover Feature Parameter Description 510501
(T8 Expiry) (TCHF) (Traffic Channel)
Handover
1278081540
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.DR
H3321C:Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081541
CELL.INTERBSC.OUTCELL.HO.REQ.DIFFERENT.SIG.POINT
H3303:Outgoing External Inter-Cell Handover Requests (Different Signaling Points)
BSC6900
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081542
CELL.INTERBSC.OUTCELL.HO.CMD.DIFFERENT.SIG.POINT
H3313:Outgoing External Inter-Cell Handover Commands (Different Signaling Points)
BSC6900
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081543
CELL.INTERBSC.OUTCELL.HO.FAIL.DIFFERENT.SIG.POINT
H3323:Failed Outgoing BSC6900 External Inter-Cell Handovers (Different Signaling Points)
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081544
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.900.900
H3307W:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081545
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.1800.1800
H3307X:Outgoing BSC6900 External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081546
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.900.1800
H3307Y:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081547
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.1800.900
H3307Z:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081552
CELL.INTERBSC.OUTCELL.HO.REQ.DR.900.900
H3301W:Outgoing External Inter-Cell Handover Requests (Directed Retry) (900/850/810900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081553
CELL.INTERBSC. OUTCELL.HO.REQ.DR.1800.1800
H3301X:Out going BSC6900 External Inter-Cell Handover Requests (Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081554
CELL.INTERBSC. OUTCELL.HO.REQ.DR.900.1800
H3301Y:Out going External Inter-Cell Handover Requests (Directed Retry) (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081555
CELL.INTERBSC. OUTCELL.HO.REQ.DR.1800.900
H3301Z:Outgoing External Inter-Cell Handover Requests (Directed Retry) (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081556
CELL.INTERBSC.OUTCELL.HO.REQ
CH330:Outgoing External Inter-Cell Handover Requests
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081557
CELL.INTERBSC.OUTCELL.HO.SUCC
CH333:Successful Outgoing External Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081558
CELL.INTERBSC.OUTCELL.HO.CMD
CH331:Outgoing
BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
111/201
16/7/2015
Handover Feature Parameter Description External Inter-Cell Handover Commands
110601 GBFD510501
Handover HUAWEI II Handover
1278081559
CELL.INTERBSC.OUTCELL.HO.FAIL
CH332:Failed Outgoing External Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081560
CELL.INTERBSC.OUTCELL.HO.SUCC.RATE
TH333:Success Rate BSC6900 of Outgoing External Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081561
CELL.INTERBSC.OUTCELL.HO.FAIL.REQ.REJ
CH332K:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081562
CELL.INTERBSC. OUTCELL.HO.FAIL.RECONN.SUCC
CH332D:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081563
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR
CH332H:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081564
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP
CH332L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081565
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP
CH332C:Failed Outgoing External Inter-Cell Handovers (T8 Expired)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081576
CELL.INTERBSC.OUTCELL.CLEAR.CMD.BEFORE.HO.CMD
H335A:Outgoing External Inter-Cell Handover Clear Cmd Times (Before Handover Response)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081577
CELL.INTERBSC.OUTCELL.CLEAR.CMD.AFTER.HO.CMD
H335B:Outgoing BSC6900 External Inter-Cell Handover Clear Cmd Times (After Handover Response)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081578
CELL.INTERBSC.OUT.CELL.RD.HO.SUCC.RATE
RH303E:Success Rate of External Outgoing Cell Radio Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084417
CELLCELL.INCELL.HO.REQ
H380:Incoming InterCell Handover Requests
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084418
CELLCELL.INCELL.HO.FAIL.CONG
H382A:Failed Incoming Inter-Cell Handovers (Congestion)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084419
CELLCELL.INCELL.HO.FAIL.OTHER
H382M:Failed Incoming Inter-Cell Handovers (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084420
CELLCELL.INCELL.HO.SUCC.RATE
RH383:Success Rate BSC6900 of Incoming Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084421
CELLCELL.INCELL.HO.FAIL
H382:Failed Incoming BSC6900 Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084422
CELLCELL.INCELL.HO.SUCC
H383:Successful Incoming Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085417
CELLCELL.OUTCELL.CMD.UL.QLTY
H371A:Outgoing Inter- BSC6900 Cell Handover Commands (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085418
CELLCELL.OUTCELL.CMD.DL.QLTY
H371B:Outgoing Inter- BSC6900 Cell Handover Commands (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085419
CELLCELL.OUTCELL.CMD.UL.RXL
H371C:Outgoing Inter- BSC6900 Cell Handover Commands (Uplink
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
112/201
16/7/2015
Handover Feature Parameter Description
1278085420
CELLCELL.OUTCELL.CMD.DL.RXL
H371D:Outgoing Inter- BSC6900 Cell Handover Commands (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085421
CELLCELL.OUTCELL.CMD.TA
H371E:Outgoing Inter- BSC6900 Cell Handover Commands (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085422
CELLCELL.OUTCELL.CMD.BETTER.CELL
H371F:Outgoing Inter- BSC6900 Cell Handover Commands (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085423
CELLCELL.OUTCELL.CMD.LOAD
H371G:Outgoing Inter- BSC6900 Cell Handover Commands (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085424
CELLCELL.OUTCELL.CMD.RAPID.LEV.DROP
H371H:Outgoing Inter- BSC6900 Cell Handover Commands (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085425
CELLCELL.OUTCELL.CMD.MSC.INTERVENTION
H371I: Outgoing Inter- BSC6900 Cell Handover Commands (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085426
CELLCELL.OUTCELL.CMD.OM.INTERVENTION
H371J:Outgoing Inter- BSC6900 Cell Handover Commands (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085428
CELLCELL.OUTCELL.CMD.OTHER
H371L:Outgoing Inter- BSC6900 Cell Handover Commands (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085429
CELLCELL.OUTCELL.FAIL.UL.QLTY
H372A:Failed Outgoing Inter-Cell Handovers (Uplink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085430
CELLCELL.OUTCELL.FAIL.DL.QLTY
H372B:Failed Outgoing Inter-Cell Handovers (Downlink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085431
CELLCELL.OUTCELL.FAIL.UL.RXL
H372C:Failed Outgoing Inter-Cell Handovers (Uplink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085432
CELLCELL.OUTCELL.FAIL.DL.RXL
H372D:Failed Outgoing Inter-Cell Handovers (Downlink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085433
CELLCELL.OUTCELL.FAIL.TA
H372E:Failed Outgoing Inter-Cell Handovers (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085434
CELLCELL.OUTCELL.FAIL.BETTER.CELL
H372F:Failed Outgoing BSC6900 Inter-Cell Handovers (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085435
CELLCELL.OUTCELL.FAIL.LOAD
H372G:Failed Outgoing Inter-Cell Handovers (Load)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085436
CELLCELL.OUTCELL.FAIL.RAPID.LEV.DROP
H372H:Failed Outgoing Inter-Cell Handovers (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085437
CELLCELL.OUTCELL.FAIL. MSC.I NTERVENTION
H372I: Failed Outgoing BSC6900 Inter-Cell Handovers (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085438
CELLCELL.OUTCELL.FAIL.OM.INTERVENTION
H372J:Failed Outgoing BSC6900 Inter-Cell Handovers (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085440
CELLCELL.OUTCELL.FAIL.OTHER
H372L:Failed Outgoing BSC6900 Inter-Cell Handovers (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085441
CELLCELL.OUTCELL.HO.SUCC.RATE
RH373:Outgoing Inter- BSC6900 Cell Handover Success Rate
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
113/201
16/7/2015
Handover Feature Parameter Description
1278085442
CELLCELL.OUTCELL.HO.CMD
H371:Outgoing InterCell Handover Commands
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085443
CELLCELL.OUTCELL.HO.FAIL
H372:Failed Outgoing BSC6900 Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085444
CELLCELL.OUTCELL.HO.SUCC
H373:Successful Outgoing Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085451
CELLCELL.OUTCELL.HO.REQ
H370c:Outgoing Inter- BSC6900 Cell Handover Requests
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085452
CELLCELL.OUT.CELL.FAIL.TIMES.DR
H372P:Failed Outgoing Inter-Cell Handovers (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085453
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. UL. QUA LI TY
H 374A: Out goi ng I nt er- BSC6900 Cell Handover Requests (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085454
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. DL. QUA LI TY
H 374B: Out goi ng I nt er- BSC6900 Cell Handover Requests (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085455
CELLCELL.OUT.CELL.HO.REQ.TIMES.UL.RXL
H374C:Outgoing Inter- BSC6900 Cell Handover Requests (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085456
CELLCELL.OUT.CELL.HO.REQ.TIMES.DL.RXL
H374D:Outgoing Inter- BSC6900 Cell Handover Requests (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085457
CELLCELL.OUT.CELL.HO.REQ.TIMES.TA
H374E:Outgoing Inter- BSC6900 Cell Handover Requests (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085458
CELLCELL.OUT.CELL.HO.REQ.TIMES.LOAD
H374F:Outgoing Inter- BSC6900 Cell Handover Requests (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085459
CELLCELL.OUT.CELL.HO.REQ.TIMES.MSC.INTERVENTION
H374G:Outgoing Inter- BSC6900 Cell Handover Requests (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085460
CELLCELL.OUT.CELL.HO.REQ.TIMES.OM.INTERVENTION
H374H:Outgoing Inter- BSC6900 Cell Handover Requests (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085461
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. BETTER .C ELL
H 374I :Out goi ng I nt er- BSC6900 Cell Handover Requests (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085462
CELLCELL.OUT.CELL.HO.REQ.TIMES.RAPID.LEVEL.DROP
H374J:Outgoing Inter- BSC6900 Cell Handover Requests (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085463
CELLCELL.OUT.CELL.HO.REQ.TIMES.DR
H374K:Outgoing Inter- BSC6900 Cell Handover Requests (Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085464
CELLCELL.OUT.CELL.HO.REQ.TIMES.OTHER
H374L:Outgoing Inter- BSC6900 Cell Handover Requests (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085465
CELLCELL.OUT.CELL.HO.SUCC.TIMES.UL. QUALITY
H373A: Suc cess ful Outgoing Inter-Cell Handovers (Uplink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085466
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DL. QUALITY
H373B: Suc cess ful Outgoing Inter-Cell Handovers (Downlink Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085467
CELLCELL.OUT.CELL.HO.SUCC.TIMES.UL.RXL
H373C:Successful
BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
114/201
16/7/2015
Handover Feature Parameter Description Handovers (Uplink Strength)
GBFD510501
HUAWEI II Handover
1278085468
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DL.RXL
H373D:Successful Outgoing Inter-Cell Handovers (Downlink Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085469
CELLCELL.OUT.CELL.HO.SUCC.TIMES.TA
H373E:Successful Outgoing Inter-Cell Handovers (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085470
CELLCELL.OUT.CELL.HO.SUCC.TIMES.LOAD
H373F:Successful Outgoing Inter-Cell Handovers (Load)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085471
CELLCELL.OUT.CELL.HO.SUCC.TIMES.MSC.INTERVENTION
H373G:Successful Outgoing Inter-Cell Handovers (MSC Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085472
CELLCELL.OUT.CELL.HO.SUCC.TIMES.OM.INTERVENTION
H373H:Successful Outgoing Inter-Cell Handovers (OM Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085473
C ELLC ELL. OU T. CELL. HO. SUC C. TI MES. BETTER .C ELL
H 373I :Suc ces sf ul Outgoing Inter-Cell Handovers (Better Cell)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085474
CELLCELL.OUT.CELL.HO.SUCC.TIMES.RAPID.LEVEL.DROP
H373J:Successful Outgoing Inter-Cell Handovers (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085475
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DR
H373K:Successful Outgoing Inter-Cell Handovers (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085476
CELLCELL.OUT.CELL.HO.SUCC.TIMES.OTHER
H373L:Successful Outgoing Inter-Cell Handovers (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085477
CELLCELL.OUT.CELL.HO.FAIL.RECONN.SUCC.TIMES
H375A:Outgoing Inter- BSC6900 Cell Handover Fail Reconn Success
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085478
C ELLC ELL. OU T. CELL. HO. FAI L. REC ONN .FAI L. TI MES
H 375B: Out goi ng I nt er- BSC6900 Cell Handover Fail Reconn Fail
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278086434
CELL.HO.UL.LEV.AVG
AS330C:Mean Uplink BSC6900 Receiving Level during Handover Initiation
GBFD110601
HUAWEI I Handover
1278086436
CELL.HO.UL.QLTY.AVG
AS331C:Mean Uplink BSC6900 Receive Quality during Handover Initiation
GBFD110601
HUAWEI I Handover
1278086451
CELL.EDGE.HO.UL.LEV.AVG
S335:Mean Uplink BSC6900 Receiving Level during Edge Handover Initiation
GBFD110601
HUAWEI I Handover
1278086452
CELL.EDGE.HO.DL.LEV.AVG
S336:Mean Downlink BSC6900 Receiving Level during Edge Handover Initiation
GBFD110601
HUAWEI I Handover
1278087434
CELL.KPI.TCH.HO.REQ.TRAF
K3010B:TCH Seizure BSC6900 Requests in TCH Handovers (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087435
CELL.KPI.TCH.HO.CONGEST.TRAF
K3011B:Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087436
CELL.KPI.TCH.HO.SUCC.TRAF
K3013B:Successful BSC6900 TCH Seizures in TCH handovers (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087441
CELL.KPI.DUBAND.HO.REQ
K3170:Dual-Band Handover Requests
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087442
CELL.KPI.DUBAND.HO.SUCC
K3173:Successful Dual-Band Handovers
BSC6900
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
115/201
16/7/2015
Handover Feature Parameter Description 510501
Handover
1278087449
CELL.KPI.DUBAND.HO.FAIL
K3173F:Failed DualBand Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278269453
CELL.DL.MR.NUM
S373:Number of Downlink MRs
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269457
CELL.MR.WEAK.COVERAGE.RATE
CS3031A:Rate of BSC6900 MRs (Weak Coverage)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269458
CELL.MR.OVER.COVERAGE.RATE
CS3031B:Rate of MRs (Excessive Coverage)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269459
CELL.SCELL.MR.NUM
S3013:MRs of Serving BSC6900 Cells
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271427
CELL.DL.SIG.STRENGTH.AVR
AS325B:Mean Strength of Downlink Signals
BSC6900
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271428
CELL.UL.SIG.STRENGTH.AVR
AS325A:Mean Strength of Uplink Signals
BSC6900
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271431
CELL.DL.SIG.QLTY.AVR
AS326B:Mean Quality BSC6900 of Downlink Signals
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271432
CELL.UL.SIG.QLTY.AVR
AS326A:Mean Quality BSC6900 of Uplink Signals
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271435
CELL.TIME.WHEN.MAX.DOWN.PWR.AVR
RS327B:Rate of Duration (Maximum Downlink Transmit Power) (%)
BSC6900
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271436
CELL.TIME.WHEN.MAX.UP.PWR.AVR
RS327A:Rate of Maximum Uplink Power Duration (%)
BSC6900
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271440
CELL.MAX.MS.BTS.DIST
S3281:Maximum BSC6900 Distance Between MS and BTS
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271442
CELL.MS.BTS.DIST.AVR
AS3280:Mean BSC6900 Distance Between MS and BTS
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273417
TRX.FR.UP.LEV.0.RX.QLTY.0
S4100A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273418
TRX.FR.UP.LEV.0.RX.QLTY.1
S4101A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0
GBFD 110801 GBFD-
Processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
116/201
16/7/2015
Handover Feature Parameter Description of Measurement Report
Rank 1) 1278273419
TRX.FR.UP.LEV.0.RX.QLTY.2
S4102A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273420
TRX.FR.UP.LEV.0.RX.QLTY.3
S4103A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273421
TRX.FR.UP.LEV.0.RX.QLTY.4
S4104A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273422
TRX.FR.UP.LEV.0.RX.QLTY.5
S4105A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273423
TRX.FR.UP.LEV.0.RX.QLTY.6
S4106A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273424
TRX.FR.UP.LEV.0.RX.QLTY.7
S4107A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273425
TRX.FR.UP.LEV.1.RX.QLTY.0
S4110A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273426
TRX.FR.UP.LEV.1.RX.QLTY.1
S4111A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273427
TRX.FR.UP.LEV.1.RX.QLTY.2
S4112A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273428
TRX.FR.UP.LEV.1.RX.QLTY.3
S4113A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273429
TRX.FR.UP.LEV.1.RX.QLTY.4
S4114A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273430
TRX.FR.UP.LEV.1.RX.QLTY.5
S4115A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273431
TRX.FR.UP.LEV.1.RX.QLTY.6
S4116A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273432
TRX.FR.UP.LEV.1.RX.QLTY.7
S4117A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273433
TRX.FR.UP.LEV.2.RX.QLTY.0
S4120A:Number of
GBFD-
Processing of
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
117/201
16/7/2015
Handover Feature Parameter Description MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 0)
110801 GBFD110802
Measurement Report Pre-processing of Measurement Report
1278273434
TRX.FR.UP.LEV.2.RX.QLTY.1
S4121A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273435
TRX.FR.UP.LEV.2.RX.QLTY.2
S4122A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273436
TRX.FR.UP.LEV.2.RX.QLTY.3
S4123A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273437
TRX.FR.UP.LEV.2.RX.QLTY.4
S4124A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273438
TRX.FR.UP.LEV.2.RX.QLTY.5
S4125A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273439
TRX.FR.UP.LEV.2.RX.QLTY.6
S4126A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273440
TRX.FR.UP.LEV.2.RX.QLTY.7
S4127A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273441
TRX.FR.UP.LEV.3.RX.QLTY.0
S4130A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273442
TRX.FR.UP.LEV.3.RX.QLTY.1
S4131A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273443
TRX.FR.UP.LEV.3.RX.QLTY.2
S4132A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273444
TRX.FR.UP.LEV.3.RX.QLTY.3
S4133A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273445
TRX.FR.UP.LEV.3.RX.QLTY.4
S4134A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273446
TRX.FR.UP.LEV.3.RX.QLTY.5
S4135A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273447
TRX.FR.UP.LEV.3.RX.QLTY.6
S4136A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3
GBFD 110801 GBFD-
Processing of Measurement Report
and Receive Quality
110802
Pre-processing
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
118/201
16/7/2015
Handover Feature Parameter Description Report
1278273448
TRX.FR.UP.LEV.3.RX.QLTY.7
S4137A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273449
TRX.FR.UP.LEV.4.RX.QLTY.0
S4140A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273450
TRX.FR.UP.LEV.4.RX.QLTY.1
S4141A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273451
TRX.FR.UP.LEV.4.RX.QLTY.2
S4142A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273452
TRX.FR.UP.LEV.4.RX.QLTY.3
S4143A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273453
TRX.FR.UP.LEV.4.RX.QLTY.4
S4144A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273454
TRX.FR.UP.LEV.4.RX.QLTY.5
S4145A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273455
TRX.FR.UP.LEV.4.RX.QLTY.6
S4146A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273456
TRX.FR.UP.LEV.4.RX.QLTY.7
S4147A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273457
TRX.FR.UP.LEV.5.RX.QLTY.0
S4150A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273458
TRX.FR.UP.LEV.5.RX.QLTY.1
S4151A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273459
TRX.FR.UP.LEV.5.RX.QLTY.2
S4152A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273460
TRX.FR.UP.LEV.5.RX.QLTY.3
S4153A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273461
TRX.FR.UP.LEV.5.RX.QLTY.4
S4154A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273462
TRX.FR.UP.LEV.5.RX.QLTY.5
S4155A:Number of
GBFD-
Processing of
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
119/201
16/7/2015
Handover Feature Parameter Description (Receive Level Rank 5 and Receive Quality Rank 5)
GBFD110802
Report Pre-processing of Measurement Report
1278273463
TRX.FR.UP.LEV.5.RX.QLTY.6
S4156A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273464
TRX.FR.UP.LEV.5.RX.QLTY.7
S4157A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273465
TRX.FR.UP.LEV.6.RX.QLTY.0
S4160A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273466
TRX.FR.UP.LEV.6.RX.QLTY.1
S4161A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273467
TRX.FR.UP.LEV.6.RX.QLTY.2
S4162A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273468
TRX.FR.UP.LEV.6.RX.QLTY.3
S4163A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273469
TRX.FR.UP.LEV.6.RX.QLTY.4
S4164A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273470
TRX.FR.UP.LEV.6.RX.QLTY.5
S4165A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273471
TRX.FR.UP.LEV.6.RX.QLTY.6
S4166A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273472
TRX.FR.UP.LEV.6.RX.QLTY.7
S4167A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273473
TRX.FR.UP.LEV.7.RX.QLTY.0
S4170A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273474
TRX.FR.UP.LEV.7.RX.QLTY.1
S4171A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273475
TRX.FR.UP.LEV.7.RX.QLTY.2
S4172A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273476
TRX.FR.UP.LEV.7.RX.QLTY.3
S4173A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
Rank 3)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
120/201
16/7/2015
Handover Feature Parameter Description
1278273477
TRX.FR.UP.LEV.7.RX.QLTY.4
S4174A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273478
TRX.FR.UP.LEV.7.RX.QLTY.5
S4175A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273479
TRX.FR.UP.LEV.7.RX.QLTY.6
S4176A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273480
TRX.FR.UP.LEV.7.RX.QLTY.7
S4177A:Number of BSC6900 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273481
TRX.FR.DOWN.LEV.0.RX.QLTY.0
S4100B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273482
TRX.FR.DOWN.LEV.0.RX.QLTY.1
S4101B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273483
TRX.FR.DOWN.LEV.0.RX.QLTY.2
S4102B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273484
TRX.FR.DOWN.LEV.0.RX.QLTY.3
S4103B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273485
TRX.FR.DOWN.LEV.0.RX.QLTY.4
S4104B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273486
TRX.FR.DOWN.LEV.0.RX.QLTY.5
S4105B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273487
TRX.FR.DOWN.LEV.0.RX.QLTY.6
S4106B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273488
TRX.FR.DOWN.LEV.0.RX.QLTY.7
S4107B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273489
TRX.FR.DOWN.LEV.1.RX.QLTY.0
S4110B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273490
TRX.FR.DOWN.LEV.1.RX.QLTY.1
S4111B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273491
TRX.FR.DOWN.LEV.1.RX.QLTY.2
S4112B:Number of
BSC6900
GBFD-
Processing of
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
121/201
16/7/2015
Handover Feature Parameter Description TCHF (Receive Level Rank 1 and Receive Quality Rank 2)
GBFD110802
Report Pre-processing of Measurement Report
1278273492
TRX.FR.DOWN.LEV.1.RX.QLTY.3
S4113B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273493
TRX.FR.DOWN.LEV.1.RX.QLTY.4
S4114B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273494
TRX.FR.DOWN.LEV.1.RX.QLTY.5
S4115B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273495
TRX.FR.DOWN.LEV.1.RX.QLTY.6
S4116B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273496
TRX.FR.DOWN.LEV.1.RX.QLTY.7
S4117B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273497
TRX.FR.DOWN.LEV.2.RX.QLTY.0
S4120B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273498
TRX.FR.DOWN.LEV.2.RX.QLTY.1
S4121B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273499
TRX.FR.DOWN.LEV.2.RX.QLTY.2
S4122B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273500
TRX.FR.DOWN.LEV.2.RX.QLTY.3
S4123B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273501
TRX.FR.DOWN.LEV.2.RX.QLTY.4
S4124B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273502
TRX.FR.DOWN.LEV.2.RX.QLTY.5
S4125B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273503
TRX.FR.DOWN.LEV.2.RX.QLTY.6
S4126B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273504
TRX.FR.DOWN.LEV.2.RX.QLTY.7
S4127B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273505
TRX.FR.DOWN.LEV.3.RX.QLTY.0
S4130B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
Quality Rank 0)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
122/201
16/7/2015
Handover Feature Parameter Description
1278273506
TRX.FR.DOWN.LEV.3.RX.QLTY.1
S4131B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273507
TRX.FR.DOWN.LEV.3.RX.QLTY.2
S4132B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273508
TRX.FR.DOWN.LEV.3.RX.QLTY.3
S4133B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273509
TRX.FR.DOWN.LEV.3.RX.QLTY.4
S4134B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273510
TRX.FR.DOWN.LEV.3.RX.QLTY.5
S4135B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273511
TRX.FR.DOWN.LEV.3.RX.QLTY.6
S4136B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273512
TRX.FR.DOWN.LEV.3.RX.QLTY.7
S4137B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273513
TRX.FR.DOWN.LEV.4.RX.QLTY.0
S4140B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273514
TRX.FR.DOWN.LEV.4.RX.QLTY.1
S4141B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273515
TRX.FR.DOWN.LEV.4.RX.QLTY.2
S4142B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273516
TRX.FR.DOWN.LEV.4.RX.QLTY.3
S4143B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273517
TRX.FR.DOWN.LEV.4.RX.QLTY.4
S4144B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273518
TRX.FR.DOWN.LEV.4.RX.QLTY.5
S4145B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273519
TRX.FR.DOWN.LEV.4.RX.QLTY.6
S4146B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273520
TRX.FR.DOWN.LEV.4.RX.QLTY.7
S4147B:Number of MRs on Downlink
BSC6900
GBFD 110801
Processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
123/201
16/7/2015
Handover Feature Parameter Description 110802
Rank 4 and Receive Quality Rank 7)
Pre-processing of Measurement Report
1278273521
TRX.FR.DOWN.LEV.5.RX.QLTY.0
S4150B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273522
TRX.FR.DOWN.LEV.5.RX.QLTY.1
S4151B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273523
TRX.FR.DOWN.LEV.5.RX.QLTY.2
S4152B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273524
TRX.FR.DOWN.LEV.5.RX.QLTY.3
S4153B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273525
TRX.FR.DOWN.LEV.5.RX.QLTY.4
S4154B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273526
TRX.FR.DOWN.LEV.5.RX.QLTY.5
S4155B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273527
TRX.FR.DOWN.LEV.5.RX.QLTY.6
S4156B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273528
TRX.FR.DOWN.LEV.5.RX.QLTY.7
S4157B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273529
TRX.FR.DOWN.LEV.6.RX.QLTY.0
S4160B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273530
TRX.FR.DOWN.LEV.6.RX.QLTY.1
S4161B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273531
TRX.FR.DOWN.LEV.6.RX.QLTY.2
S4162B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273532
TRX.FR.DOWN.LEV.6.RX.QLTY.3
S4163B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273533
TRX.FR.DOWN.LEV.6.RX.QLTY.4
S4164B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273534
TRX.FR.DOWN.LEV.6.RX.QLTY.5
S4165B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
124/201
16/7/2015
Handover Feature Parameter Description
1278273535
TRX.FR.DOWN.LEV.6.RX.QLTY.6
S4166B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273536
TRX.FR.DOWN.LEV.6.RX.QLTY.7
S4167B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273537
TRX.FR.DOWN.LEV.7.RX.QLTY.0
S4170B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273538
TRX.FR.DOWN.LEV.7.RX.QLTY.1
S4171B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273539
TRX.FR.DOWN.LEV.7.RX.QLTY.2
S4172B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273540
TRX.FR.DOWN.LEV.7.RX.QLTY.3
S4173B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273541
TRX.FR.DOWN.LEV.7.RX.QLTY.4
S4174B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273542
TRX.FR.DOWN.LEV.7.RX.QLTY.5
S4175B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273543
TRX.FR.DOWN.LEV.7.RX.QLTY.6
S4176B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273544
TRX.FR.DOWN.LEV.7.RX.QLTY.7
S4177B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275417
TRX.FR.UP.RX.QLTY.0.AVR
CS410A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275418
TRX.FR.UP.RX.QLTY.1.AVR
CS411A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275419
TRX.FR.UP.RX.QLTY.2.AVR
CS412A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275420
TRX.FR.UP.RX.QLTY.3.AVR
CS413A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275421
TRX.FR.UP.RX.QLTY.4.AVR
CS414A:Number of
GBFD-
Processing of
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
125/201
16/7/2015
Handover Feature Parameter Description (Mean Receive Quality Rank 4)
GBFD110802
Report Pre-processing of Measurement Report
1278275422
TRX.FR.UP.RX.QLTY.5.AVR
CS415A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275423
TRX.FR.UP.RX.QLTY.6.AVR
CS416A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275424
TRX.FR.UP.RX.QLTY.7.AVR
CS417A:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275425
TRX.FR.DOWN.RX.QLTY.0.AVR
CS410B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 0)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275426
TRX.FR.DOWN.RX.QLTY.1.AVR
CS411B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 1)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275427
TRX.FR.DOWN.RX.QLTY.2.AVR
CS412B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 2)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275428
TRX.FR.DOWN.RX.QLTY.3.AVR
CS413B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 3)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275429
TRX.FR.DOWN.RX.QLTY.4.AVR
CS414B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 4)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275430
TRX.FR.DOWN.RX.QLTY.5.AVR
CS415B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 5)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275431
TRX.FR.DOWN.RX.QLTY.6.AVR
CS416B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 6)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275432
TRX.FR.DOWN.RX.QLTY.7.AVR
CS417B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 7)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276417
TRX.BALANCE.LEV.1
S462A:Number of MRs (Uplink-andDownlink Balance Level = 1)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276418
TRX.BALANCE.LEV.2
S462B:Number of MRs (Uplink-andDownlink Balance Level = 2)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276419
TRX.BALANCE.LEV.3
S462C:Number of MRs (Uplink-andDownlink Balance Level = 3)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
126/201
16/7/2015
Handover Feature Parameter Description
1278276420
TRX.BALANCE.LEV.4
S462D:Number of MRs (Uplink-andDownlink Balance Level = 4)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276421
TRX.BALANCE.LEV.5
S462E:Number of MRs (Uplink-andDownlink Balance Level = 5)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276422
TRX.BALANCE.LEV.6
S462F:Number of MRs (Uplink-andDownlink Balance Level = 6)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276423
TRX.BALANCE.LEV.7
S462G:Number of MRs (Uplink-andDownlink Balance Level = 7)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276424
TRX.BALANCE.LEV.8
S462H:Number of MRs (Uplink-andDownlink Balance Level = 8)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276425
TRX.BALANCE.LEV.9
S462I:Number of MRs BSC6900 (Uplink-and-Downlink Balance Level = 9)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276426
TRX.BALANCE.LEV.10
S462J:Number of MRs BSC6900 (Uplink-and-Downlink Balance Level = 10)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276427
TRX.BALANCE.LEV.11
S462K:Number of MRs (Uplink-andDownlink Balance Level = 11)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277417
TRX.MR.NUM.BY.TA.0
S4400A:Number of MRs (TA = 0)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277418
TRX.MR.NUM.BY.TA.1
S4401A:Number of MRs (TA = 1)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277419
TRX.MR.NUM.BY.TA.2
S4402A:Number of MRs (TA = 2)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277420
TRX.MR.NUM.BY.TA.3
S4403A:Number of MRs (TA = 3)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277421
TRX.MR.NUM.BY.TA.4
S4404A:Number of MRs (TA = 4)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277422
TRX.MR.NUM.BY.TA.5
S4405A:Number of MRs (TA = 5)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277423
TRX.MR.NUM.BY.TA.6
S4406A:Number of
BSC6900
GBFD-
Processing of
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
127/201
16/7/2015
Handover Feature Parameter Description GBFD110802
Report Pre-processing of Measurement Report
1278277424
TRX.MR.NUM.BY.TA.7
S4407A:Number of MRs (TA = 7)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277425
TRX.MR.NUM.BY.TA.8
S4408A:Number of MRs (TA = 8)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277426
TRX.MR.NUM.BY.TA.9
S4409A:Number of MRs (TA = 9)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277427
TRX.MR.NUM.BY.TA.10
S4410A:Number of MRs (TA = 10)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277428
TRX.MR.NUM.BY.TA.11
S4411A:Number of MRs (TA = 11)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277429
TRX.MR.NUM.BY.TA.12
S4412A:Number of MRs (TA = 12)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277430
TRX.MR.NUM.BY.TA.13
S4413A:Number of MRs (TA = 13)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277431
TRX.MR.NUM.BY.TA.14
S4414A:Number of MRs (TA = 14)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277432
TRX.MR.NUM.BY.TA.15
S4415A:Number of MRs (TA = 15)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277433
TRX.MR.NUM.BY.TA.16
S4416A:Number of MRs (TA = 16)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277434
TRX.MR.NUM.BY.TA.17
S4417A:Number of MRs (TA = 17)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277435
TRX.MR.NUM.BY.TA.18
S4418A:Number of MRs (TA = 18)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277436
TRX.MR.NUM.BY.TA.19
S4419A:Number of MRs (TA = 19)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277437
TRX.MR.NUM.BY.TA.20
S4420A:Number of MRs (TA = 20)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
128/201
16/7/2015
Handover Feature Parameter Description
1278277438
TRX.MR.NUM.BY.TA.21
S4421A:Number of MRs (TA = 21)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277439
TRX.MR.NUM.BY.TA.22
S4422A:Number of MRs (TA = 22)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277440
TRX.MR.NUM.BY.TA.23
S4423A:Number of MRs (TA = 23)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277441
TRX.MR.NUM.BY.TA.24
S4424A:Number of MRs (TA = 24)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277442
TRX.MR.NUM.BY.TA.25
S4425A:Number of MRs (TA = 25)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277443
TRX.MR.NUM.BY.TA.26
S4426A:Number of MRs (TA = 26)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277444
TRX.MR.NUM.BY.TA.27
S4427A:Number of MRs (TA = 27)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277445
TRX.MR.NUM.BY.TA.28
S4428A:Number of MRs (TA = 28)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277446
TRX.MR.NUM.BY.TA.29
S4429A:Number of MRs (TA = 29)
BSC6900
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277447
TRX.MR.NUM.BY.TA.30.TO.31
S4430A:Number of MRs (TA = 30 or 31)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277448
TRX.MR.NUM.BY.TA.32.TO.33
S4432A:Number of MRs (TA = 32 or 33)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277449
TRX.MR.NUM.BY.TA.34.TO.35
S4434A:Number of MRs (TA = 34 or 35)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277450
TRX.MR.NUM.BY.TA.36.TO.37
S4436A:Number of MRs (TA = 36 or 37)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277451
TRX.MR.NUM.BY.TA.38.TO.39
S4438A:Number of MRs (TA = 38 or 39)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277452
TRX.MR.NUM.BY.TA.40.TO.44
S4440A:Number of
BSC6900
GBFD
Processing of
110801
Measurement
MRs (TA = 40 to 44)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
129/201
16/7/2015
Handover Featur e Parameter Description 110802
Pre-processing of Measurement Report
1278277453
TRX.MR.NUM.BY.TA.45.TO.49
S4445A:Number of MRs (TA = 45 to 49)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277454
TRX.MR.NUM.BY.TA.50.TO.54
S4450A:Number of MRs (TA = 50 to 54)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277455
TRX.MR.NUM.BY.TA.55.TO.63
S4455A:Number of MRs (TA = 55 to 63)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277456
TRX.MR.NUM.BY.TA.GT.63
S4463A:Number of MRs (TA greater than 63)
BSC6900
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278280457
TRX.RQI.MR.NUM.BY.TA.0
S4400C:MRs with RQI (TA = 0)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280458
TRX.RQI.MR.NUM.BY.TA.1
S4401C:MRs with RQI (TA = 1)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280459
TRX.RQI.MR.NUM.BY.TA.2
S4402C:MRs with RQI (TA = 2)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280460
TRX.RQI.MR.NUM.BY.TA.3
S4403C:MRs with RQI (TA = 3)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280461
TRX.RQI.MR.NUM.BY.TA.4
S4404C:MRs with RQI (TA = 4)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280462
TRX.RQI.MR.NUM.BY.TA.5
S4405C:MRs with RQI (TA = 5)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280463
TRX.RQI.MR.NUM.BY.TA.6
S4406C:MRs with RQI (TA = 6)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280464
TRX.RQI.MR.NUM.BY.TA.7
S4407C:MRs with RQI (TA = 7)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280465
TRX.RQI.MR.NUM.BY.TA.8
S4408C:MRs with RQI (TA = 8)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280466
TRX.RQI.MR.NUM.BY.TA.9
S4409C:MRs with RQI (TA = 9)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280467
TRX.RQI.MR.NUM.BY.TA.10
S4410C:MRs with RQI (TA = 10)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280468
TRX.RQI.MR.NUM.BY.TA.11
S4411C:MRs with RQI (TA = 11)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280469
TRX.RQI.MR.NUM.BY.TA.12
S4412C:MRs with RQI (TA = 12)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280470
TRX.RQI.MR.NUM.BY.TA.13
S4413C:MRs with RQI (TA = 13)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280471
TRX.RQI.MR.NUM.BY.TA.14
S4414C:MRs with RQI (TA = 14)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280472
TRX.RQI.MR.NUM.BY.TA.15
S4415C:MRs with RQI (TA = 15)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280473
TRX.RQI.MR.NUM.BY.TA.16
S4416C:MRs with RQI (TA = 16)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280474
TRX.RQI.MR.NUM.BY.TA.17
S4417C:MRs with RQI (TA = 17)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
130/201
16/7/2015
Handover Feature Parameter Description
1278280475
TRX.RQI.MR.NUM.BY.TA.18
S4418C:MRs with RQI (TA = 18)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280476
TRX.RQI.MR.NUM.BY.TA.19
S4419C:MRs with RQI (TA = 19)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280477
TRX.RQI.MR.NUM.BY.TA.20
S4420C:MRs with RQI (TA = 20)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280478
TRX.RQI.MR.NUM.BY.TA.21
S4421C:MRs with RQI (TA = 21)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280479
TRX.RQI.MR.NUM.BY.TA.22
S4422C:MRs with RQI (TA = 22)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280480
TRX.RQI.MR.NUM.BY.TA.23
S4423C:MRs with RQI (TA = 23)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280481
TRX.RQI.MR.NUM.BY.TA.24
S4424C:MRs with RQI (TA = 24)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280482
TRX.RQI.MR.NUM.BY.TA.25
S4425C:MRs with RQI (TA = 25)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280483
TRX.RQI.MR.NUM.BY.TA.26
S4426C:MRs with RQI (TA = 26)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280484
TRX.RQI.MR.NUM.BY.TA.27
S4427C:MRs with RQI (TA = 27)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280485
TRX.RQI.MR.NUM.BY.TA.28
S4428C:MRs with RQI (TA = 28)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280486
TRX.RQI.MR.NUM.BY.TA.29
S4429C:MRs with RQI (TA = 29)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280487
TRX.RQI.MR.NUM.BY.TA.30.TO.31
S4430C:MRs with RQI (TA = 30 or 31)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280488
TRX.RQI.MR.NUM.BY.TA.32.TO.33
S4432C:MRs with RQI (TA = 32 or 33)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280489
TRX.RQI.MR.NUM.BY.TA.34.TO.35
S4434C:MRs with RQI (TA = 34 or 35)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280490
TRX.RQI.MR.NUM.BY.TA.36.TO.37
S4436C:MRs with RQI (TA = 36 or 37)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280491
TRX.RQI.MR.NUM.BY.TA.38.TO.39
S4438C:MRs with RQI (TA = 38 or 39)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280492
TRX.RQI.MR.NUM.BY.TA.40.TO.44
S4440C:MRs with RQI (TA = 40 to 44)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280493
TRX.RQI.MR.NUM.BY.TA.45.TO.49
S4445C:MRs with RQI (TA = 45 to 49)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280494
TRX.RQI.MR.NUM.BY.TA.50.TO.54
S4450C:MRs with RQI (TA = 50 to 54)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280495
TRX.RQI.MR.NUM.BY.TA.55.TO.63
S4455C:MRs with RQI (TA = 55 to 63)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280496
TRX.RQI.MR.NUM.BY.TA.GT.63
S4463C:MRs with RQI (TA greater than 63)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280497
TRX.RQI.NUM.BY.TA.0.AVR
AS4400D:Mean RQI (TA = 0)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280498
TRX.RQI.NUM.BY.TA.1.AVR
AS4401D:Mean RQI (TA = 1)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280499
TRX.RQI.NUM.BY.TA.2.AVR
AS4402D:Mean RQI (TA = 2)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280500
TRX.RQI.NUM.BY.TA.3.AVR
AS4403D:Mean RQI (TA = 3)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280501
TRX.RQI.NUM.BY.TA.4.AVR
AS4404D:Mean RQI
BSC6900
GBFD-
AMR FR/HR
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
131/201
16/7/2015
Handover Feature Parameter Description Adjustment
1278280502
TRX.RQI.NUM.BY.TA.5.AVR
AS4405D:Mean RQI (TA = 5)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280503
TRX.RQI.NUM.BY.TA.6.AVR
AS4406D:Mean RQI (TA = 6)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280504
TRX.RQI.NUM.BY.TA.7.AVR
AS4407D:Mean RQI (TA = 7)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280505
TRX.RQI.NUM.BY.TA.8.AVR
AS4408D:Mean RQI (TA = 8)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280506
TRX.RQI.NUM.BY.TA.9.AVR
AS4409D:Mean RQI (TA = 9)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280507
TRX.RQI.NUM.BY.TA.10.AVR
AS4410D:Mean RQI (TA = 10)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280508
TRX.RQI.NUM.BY.TA.11.AVR
AS4411D:Mean RQI (TA = 11)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280509
TRX.RQI.NUM.BY.TA.12.AVR
AS4412D:Mean RQI (TA = 12)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280510
TRX.RQI.NUM.BY.TA.13.AVR
AS4413D:Mean RQI (TA = 13)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280511
TRX.RQI.NUM.BY.TA.14.AVR
AS4414D:Mean RQI (TA = 14)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280512
TRX.RQI.NUM.BY.TA.15.AVR
AS4415D:Mean RQI (TA = 15)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280513
TRX.RQI.NUM.BY.TA.16.AVR
AS4416D:Mean RQI (TA = 16)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280514
TRX.RQI.NUM.BY.TA.17.AVR
AS4417D:Mean RQI (TA = 17)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280515
TRX.RQI.NUM.BY.TA.18.AVR
AS4418D:Mean RQI (TA = 18)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280516
TRX.RQI.NUM.BY.TA.19.AVR
AS4419D:Mean RQI (TA = 19)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280517
TRX.RQI.NUM.BY.TA.20.AVR
AS4420D:Mean RQI (TA = 20)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280518
TRX.RQI.NUM.BY.TA.21.AVR
AS4421D:Mean RQI (TA = 21)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280519
TRX.RQI.NUM.BY.TA.22.AVR
AS4422D:Mean RQI (TA = 22)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280520
TRX.RQI.NUM.BY.TA.23.AVR
AS4423D:Mean RQI (TA = 23)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280521
TRX.RQI.NUM.BY.TA.24.AVR
AS4424D:Mean RQI (TA = 24)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280522
TRX.RQI.NUM.BY.TA.25.AVR
AS4425D:Mean RQI (TA = 25)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280523
TRX.RQI.NUM.BY.TA.26.AVR
AS4426D:Mean RQI (TA = 26)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280524
TRX.RQI.NUM.BY.TA.27.AVR
AS4427D:Mean RQI (TA = 27)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280525
TRX.RQI.NUM.BY.TA.28.AVR
AS4428D:Mean RQI (TA = 28)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280526
TRX.RQI.NUM.BY.TA.29.AVR
AS4429D:Mean RQI (TA = 29)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280527
TRX.RQI.NUM.BY.TA.30.TO.31.AVR
AS4430D:Mean RQI (TA = 30 or 31)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
132/201
16/7/2015
Handover Feature Parameter Description
1278280528
TRX.RQI.NUM.BY.TA.32.TO.33.AVR
AS4432D:Mean RQI (TA = 32 or 33)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280529
TRX.RQI.NUM.BY.TA.34.TO.35.AVR
AS4434D:Mean RQI (TA = 34 or 35)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280530
TRX.RQI.NUM.BY.TA.36.TO.37.AVR
AS4436D:Mean RQI (TA = 36 or 37)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280531
TRX.RQI.NUM.BY.TA.38.TO.39.AVR
AS4438D:Mean RQI (TA = 38 or 39)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280532
TRX.RQI.NUM.BY.TA.40.TO.44.AVR
AS4440D:Mean RQI (TA = 40 to 44)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280533
TRX.RQI.NUM.BY.TA.45.TO.49.AVR
AS4445D:Mean RQI (TA = 45 to 49)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280534
TRX.RQI.NUM.BY.TA.50.TO.54.AVR
AS4450D:Mean RQI (TA = 50 to 54)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280535
TRX.RQI.NUM.BY.TA.55.TO.63.AVR
AS4455D:Mean RQI (TA = 55 to 63)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280536
TRX.RQI.NUM.BY.TA.GT.63.AVR
AS4463D:Mean RQI (TA greater than 63)
BSC6900
GBFD115504
AMR FR/HR Dynamic Adjustment
1278287417
TRX.RQI.NUM.0.TO.1
S4400E:Number of BSC6900 Measurement Reports (RQI = 0 to 1)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287418
TRX.RQI.NUM.1.TO.2
S4401E:Number of BSC6900 Measurement Reports (RQI = 1 to 2)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287419
TRX.RQI.NUM.2.TO.3
S4402E:Number of BSC6900 Measurement Reports (RQI = 2 to 3)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287420
TRX.RQI.NUM.3.TO.4
S4403E:Number of BSC6900 Measurement Reports (RQI = 3 to 4)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287421
TRX.RQI.NUM.4.TO.5
S4404E:Number of BSC6900 Measurement Reports (RQI = 4 to 5)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287422
TRX.RQI.NUM.5.TO.6
S4405E:Number of BSC6900 Measurement Reports (RQI = 5 to 6)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287423
TRX.RQI.NUM.6.TO.7
S4406E:Number of BSC6900 Measurement Reports (RQI = 6 to 7)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287424
TRX.RQI.NUM.7.TO.8
S4407E:Number of BSC6900 Measurement Reports (RQI = 7 to 8)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287425
TRX.RQI.NUM.8.TO.9
S4408E:Number of BSC6900 Measurement Reports (RQI = 8 to 9)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287426
TRX.RQI.NUM.9.TO.10
S4409E:Number of BSC6900 Measurement Reports (RQI = 9 to 10)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287427
TRX.RQI.NUM.10.TO.11
S4410E:Number of BSC6900 Measurement Reports (RQI = 10 to 11)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287428
TRX.RQI.NUM.11.TO.12
S4411E:Number of BSC6900 Measurement Reports (RQI = 11 to 12)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287429
TRX.RQI.NUM.12.TO.13
S4412E:Number of BSC6900 Measurement Reports (RQI = 12 to 13)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287430
TRX.RQI.NUM.13.TO.14
S4413E:Number of BSC6900 Measurement Reports (RQI = 13 to 14)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287431
TRX.RQI.NUM.14.TO.15
S4414E:Number of BSC6900 Measurement Reports (RQI = 14 to 15)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287432
TRX.RQI.NUM.15.TO.25
S4415E:Number of BSC6900 Measurement Reports (RQI = 15 to 25)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287433
TRX.RQI.NUM.25.TO.35
S4416E:Number of BSC6900 Measurement Reports (RQI = 25 to 35)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287434
TRX.RQI.NUM.35.TO.45
S4417E:Number of
GBFD-
AMR FR/HR
BSC6900
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
133/201
16/7/2015
Handover Feature Parameter Description (RQI = 35 to 45)
Adjustment
1278287435
TRX.RQI.NUM.45.TO.55
S4418E:Number of BSC6900 Measurement Reports (RQI = 45 to 55)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287436
TRX.RQI.NUM.GT.55
S4419E:Number of BSC6900 Measurement Reports (RQI greater than 55)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287457
TRX.RQI.MR.TOTAL.NUM
S4440E:Number of BSC6900 Measurement Reports with RQI
GBFD 115504
AMR FR/HR Dynamic Adjustment
1278288417
TRX.FR.DOWN.RX.QLTY.0.NEW
NCS412A:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288418
TRX.FR.DOWN.RX.QLTY.1.NEW
NCS412B:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288419
TRX.FR.DOWN.RX.QLTY.2.NEW
NCS412C:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288420
TRX.FR.DOWN.RX.QLTY.3.NEW
NCS412D:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288421
TRX.FR.DOWN.RX.QLTY.4.NEW
NCS412E:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288422
TRX.FR.DOWN.RX.QLTY.5.NEW
NCS412F:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288423
TRX.FR.DOWN.RX.QLTY.6.NEW
NCS412G:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288424
TRX.FR.DOWN.RX.QLTY.7.NEW
NCS412H:Number of BSC6900 MRs on Downlink TCHF (Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288425
TRX.FR.UP.RX.QLTY.0.NEW
NCS413A:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 0)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288426
TRX.FR.UP.RX.QLTY.1.NEW
NCS413B:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 1)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288427
TRX.FR.UP.RX.QLTY.2.NEW
NCS413C:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 2)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288428
TRX.FR.UP.RX.QLTY.3.NEW
NCS413D:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 3)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288429
TRX.FR.UP.RX.QLTY.4.NEW
NCS413E:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank
GBFD- 110801 GBFD-
Processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
134/201
16/7/2015
Handover Feature Parameter Description of Measurement Report
1278288430
TRX.FR.UP.RX.QLTY.5.NEW
NCS413F:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 5)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288431
TRX.FR.UP.RX.QLTY.6.NEW
NCS413G:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 6)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288432
TRX.FR.UP.RX.QLTY.7.NEW
NCS413H:Number of BSC6900 MRs on Uplink TCHF (Receive Quality Rank 7)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278699491
BSCRPT.INTRACELL.HO.FAIL.RECONN.FAIL
ZCH902C:Failed Reconnections to Old Channels upon IntraCell Handover Failure per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699492
BSCRPT.INTRACELL.HO.FAIL.RECONN.SUCC
ZCH902D:Successful BSC6900 Reconnections to Old Channels upon IntraCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699493
BSC RPT. IN TR ABSC .OU TC ELL. HO. FAI L. RE CON N. FAI L
ZC H912C :Fai led BSC6900 Reconnections to Old Channels upon Outgoing Internal InterCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699494
BSC RPT. IN TR ABSC .OU TC ELL. HO. FAI L. RE CON N. SU CC
ZC H912D :Suc ces sf ul BSC6900 Reconnections to Old Channels upon Outgoing Internal InterCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699495
BSC RPT. IN TER BSC .OU TC ELL. HO. FAI L. RE CON N. FAI L
ZC H932C :Fai led Reconnections to Old Channels upon Outgoing External Inter-Cell Handover Failure per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699496
BSC RPT. IN TER BSC .OU TC ELL. HO. FAI L. RE CON N. SU CC
ZC H932D :Suc ces sf ul BSC6900 Reconnections to Old Channels upon Outgoing External Inter-Cell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699499
BSCRPT.INTERBSC.INCELL.HO.FAIL.CONTENTS.INVALID
ZH942I:Failed Incoming External Inter-Cell Handovers per BSC (Illegal Message)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699500
BSCRPT.INTERBSC.INCELL.HO.FAIL.CONG
ZCH942A:Failed Incoming External Inter-Cell Handovers per BSC (Channel Unavailable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699501
BSCRPT.INTERBSC.INCELL.HO.FAIL.NO.CIC
ZH942E:Failed Incoming External Inter-Cell Handovers per BSC (Requested Territorial Resource Unavailable)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699502
BSCRPT.INTERBSC.INCELL.HO.FAIL.CIC.AVAIL
ZH942F:Failed Incoming External Inter-Cell Handovers per BSC (Territorial Resource Already Allocated)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699503
BSC RPT. IN TER BSC .I NC ELL. HO. FAI L. APPLY. TR SL. FAI L
ZH 942B: Failed Incoming External Inter-Cell Handovers per BSC (Equipment Failure)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699504
BSCRPT.INTERBSC.INCELL.HO.FAIL.TIEMER.OUT
ZCH9420C:Failed Incoming External Inter-Cell Handovers per BSC (Timer Expired)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699505
BSCRPT.INTERBSC.INCELL.HO.FAIL.MSC.CLEAR.CMD
ZH942H: Failed
BSC6900
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
135/201
16/7/2015
Handover Feature Parameter Description Inter-Cell Handovers per BSC (Clear Commands Sent By MSC)
GBFD510501
HUAWEI II Handover
1278699506
BSCRPT.INTERBSC.INCELL.HO.CH.ACT.NACK
ZCR9350B:CHAN BSC6900 ACT NACK Messages Sent by BTS in Incoming External Inter-Cell Handover Procedure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699507
BSCRPT.INTERBSC.INCELL.HO.CH.ACT.EXP
ZCR9350C:Channel BSC6900 Activation Timeouts in Incoming External Inter-Cell Handover Procedure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700443
BSCRPT.HO.REQ.UL.QLTY
ZCH970A:Attempted BSC6900 Handovers per BSC (Uplink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700444
BSCRPT.HO.REQ.DL.QLTY
ZCH970B:Attempted Handovers per BSC (Downlink Signal Quality)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700445
BSCRPT.HO.REQ.UL.RXL
ZCH970C:Attempted Handovers per BSC (Uplink Signal Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700446
BSCRPT.HO.REQ.DL.RXL
ZCH970D:Attempted Handovers per BSC (Downlink Signal Strength)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700447
BSCRPT.HO.REQ.TA
ZCH970E:Attempted Handovers per BSC (Timing Advance)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700448
BSCRPT.HO.REQ.BETTER.CELL
ZCH970F:Attempted BSC6900 Handovers for Better Cell per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700449
BSCRPT.HO.REQ.LOAD
ZCH970G:Attempted Handovers for Traffic Load per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700450
BSCRPT.HO.REQ.RAPID.LEV.DROP
ZCH970H:Attempted Handovers per BSC (Rapid Level Drop)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700451
BSCRPT.HO.REQ.MSC.INTERVENTION
ZCH970I:Attempted Handovers for MSC Intervention per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700452
BSCRPT.HO.REQ.OM.INTERVENTION
ZCH970J:Attempted Handovers for OM Intervention per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700453
BSCRPT.HO.REQ.OTHER
ZCH970L:HO Requests per BSC (Other Causes)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700456
BSCRPT.HO.REQ.AMR
ZCH9005:Number of BSC6900 Attempted Intra-Cell Handovers Between TCHF and TCHH per BSC
GBFD- 110601 GBFD510501 GBFD115504
HUAWEI I Handover HUAWEI II Handover AMR FR/HR Dynamic Adjustment
1278700457
BSCRPT.HO.REQ.DR
ZCH9701:Attempted Handovers per BSC (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278701445
BSCRPT.HO.SUCC.UL.QLTY
ZCH973A:Successful BSC6900 Handovers per BSC (Uplink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701446
BSCRPT.HO.SUCC.DL.QLTY
ZCH973B:Successful BSC6900 Handovers per BSC (Downlink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701447
BSCRPT.HO.SUCC.UL.RXL
ZCH973C:Successful BSC6900
GBFD-
HUAWEI I
Handovers per BSC
110601
Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
136/201
16/7/2015
Handover Feature Parameter Description Strength)
510501
Handover
1278701448
BSCRPT.HO.SUCC.DL.RXL
ZCH973D:Successful BSC6900 Handovers per BSC (Downlink Signal Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701449
BSCRPT.HO.SUCC.TA
ZCH973E:Successful BSC6900 Handovers per BSC (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701450
BSCRPT.HO.SUCC.BETTER.CELL
ZCH973F:Successful BSC6900 Handovers per BSC (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701451
BSCRPT.HO.SUCC.LOAD
ZCH973G:Successful BSC6900 Handovers per BSC (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701452
BSCRPT.HO.SUCC.RAPID.LEV.DROP
ZCH973H:Successful BSC6900 Handovers per BSC (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701453
BSCRPT.HO.SUCC.MSC.INTERVENTION
ZCH973I:Successful Handovers per BSC (MSC Intervention)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701454
BSCRPT.HO.SUCC.OM.INTERVENTION
ZCH973J:Successful BSC6900 Handovers per BSC (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701455
BSCRPT.HO.SUCC.OTHER
ZCH973L:Successful BSC6900 Handovers per BSC (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701458
BSCRPT.HO.SUCC.AMR
ZH9035:Number of BSC6900 Successful Intra-Cell Handovers Between TCHF and TCHH per BSC
GBFD 110601 GBFD510501 GBFD115504
HUAWEI I Handover HUAWEI II Handover AMR FR/HR Dynamic Adjustment
1278701459
BSCRPT.HO.SUCC.DR
ZH9731:Successful Handovers per BSC (Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278702417
BSCRPT.INTRABSC.INTERCELL. HO. REQ. 900.1800
ZCH900Y:Int ernal Inter-Cell Handover Attempts per BSC (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702418
BSCRPT.INTRABSC.INTERCELL. HO. REQ. 1800.900
ZCH900Z:Internal Inter-Cell Handover Attempts per BSC (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702419
BSC RPT. IN TR ABSC .I NTER CELL. HO. SU CC .900. 1800
ZC H903Y :Suc ces sf ul BSC6900 Internal Inter-Cell Handovers per BSC (900/850/810 1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702420
BSC RPT. IN TR ABSC .I NTER CELL. HO. SU CC .1800. 900
ZC H903Z: Suc ces sf ul BSC6900 Internal Inter-Cell Handovers per BSC (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702421
BSCRPT.INBSC.HO.REQ.900.1800
ZCH940Y:Incoming BSC Handover Attempts per BSC (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702422
BSCRPT.INBSC.HO.REQ.1800.900
ZCH940Z:Incoming BSC Handover Attempts per BSC (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702423
BSCRPT.INBSC.HO.SUCC.900.1800
ZCH943Y:Successful BSC6900 Incoming BSC Handovers per BSC (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702424
BSCRPT.INBSC.HO.SUCC.1800.900
ZCH943Z:Successful BSC6900 Incoming BSC
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
137/201
16/7/2015
Handover Feature Parameter Description (1800/1900900/850/810)
510501
Handover
1278702425
BSCRPT.OUTBSC.HO.REQ.900.1800
ZCH930Y:Outgoing BSC Handover Attempts per BSC (900/850/8101800/1900)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702426
BSCRPT.OUTBSC.HO.REQ.1800.900
ZCH930Z:Outgoing BSC Handover Attempts per BSC (1800/1900900/850/810)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702427
BSCRPT.OUTBSC.HO.SUCC.900.1800
ZCH933Y:Successful BSC6900 Outgoing BSC Handovers per BSC (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702428
BSCRPT.OUTBSC.HO.SUCC.1800.900
ZCH933Z:Successful BSC6900 Outgoing BSC Handovers per BSC (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703566
BSCRPT.INTRACELL.HO.REQ
ZCH300:Internal Intra- BSC6900 Cell Handover Requests per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703567
BSCRPT.INTRACELL.HO.CMD
ZCH301:Internal Intra- BSC6900 Cell Handover Commands per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703568
BSCRPT.INTRACELL.HO.SUCC
ZCH303:Successful Internal Intra-Cell Handovers per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703569
BSCRPT.INTRABSC.OUTCELL.HO.REQ
ZCH310:Outgoing Internal Inter-Cell Handover Requests per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703570
BSCRPT.INTRABSC.OUTCELL.HO.CMD
ZCH311:Outgoing Internal Inter-Cell Handover Commands per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703571
BSCRPT.INTRABSC.OUTCELL.HO.SUCC
ZCH313:Successful BSC6900 Outgoing Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703572
BSCRPT.INTRABSC.INCELL.HO.REQ
ZCH320:Incoming Internal Inter-Cell Handover Requests per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703573
BSCRPT.INTRABSC.INCELL.HO.CMD
ZK3190:Incoming Internal Inter-Cell Handover Commands per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703574
BSCRPT.INTRABSC.INCELL.HO.SUCC
ZCH323:Successful BSC6900 Incoming Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703575
BSCRPT.INTERBSC.OUTCELL.HO.REQ
ZCH330:Outgoing External Inter-Cell Handover Requests per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703576
BSCRPT.INTERBSC.OUTCELL.HO.CMD
ZCH331:Outgoing External Inter-Cell Handover Commands per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703577
BSCRPT.INTERBSC.OUTCELL.HO.SUCC
ZCH333:Successful Outgoing External Inter-Cell Handovers per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703578
BSCRPT.INTERBSC.INCELL.HO.REQ
ZCH340:Incoming External Inter-Cell Handover Requests per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703579
BSCRPT.INTERBSC.INCELL.HO.CMD
ZK3191:Incoming External Inter-Cell Handover Commands per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703580
BSCRPT.INTERBSC.INCELL.HO.SUCC
ZCH343:Successful Incoming External Inter-Cell Handovers
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
per BSC
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
138/201
16/7/2015
Handover Feature Parameter Description
1278703581
BSCRPT.KPI.DUBAND.HO.REQ
ZK3170:Dual-Band Handover Requests per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703582
BSCRPT.KPI.DUBAND.HO.SUCC
ZK3173:Successful Dual-Band Handovers per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703583
BSCRPT.INTERBSC.INCELL.HO.REQ.DIFFERENT.SIG.POINT
ZK3192:Outgoing External Inter-Cell Handover Requests (Different Signaling Points) per BSC
BSC6900
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703584
BSCRPT.INTERBSC.INCELL.HO.FAIL.DIFFERENT.SIG.POINT
ZK3193:Failed Outgoing External Inter-Cell Handovers (Different Signaling Points) per BSC
BSC6900
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703585
BSCRPT.INTERBSC.INCELL.HO.CMD.DIFFERENT.SIG.POINT
ZK3194:Outgoing External Inter-Cell Handover Commands (Different Signaling Points) per BSC
BSC6900
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703586
BSCRPT.KPI.INTRABSC.HO.SUCC.RATE
ZK3174:Internal Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703587
BSC RPT. KPI .I NTR ABSC .W IR ELE SS. HO. SU CC .R ATE
ZK3175: Int ernal R adio BSC6900 Handover Success Rate per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703588
BSCRPT.KPI .INTERBSC.OUTCELL.HO.SUCC.RATE
ZK3176:Outgoing External Inter-Cell Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703589
BSCRPT.KPI.INTERBSC.OUTCELL.WIRELESS.HO.SUCC.RATE
ZK3177:Outgoing External Inter-Cell Radio Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703590
BSCRPT.KPI.INTERBSC.INCELL.HO.SUCC.RATE
ZK3178:Incoming External Inter-Cell Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703591
BSCRPT.KPI.INTERBSC.INCELL.WIRELESS.HO.SUCC.RATE
ZK3179:Incoming External Inter-Cell Radio Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703592
BSCRPT.KPI.HO.SUCC.RATE
ZK3180:Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703593
BSCRPT.KPI.WIRELESS.HO.SUCC.RATE
ZK3181:Radio Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703594
BSCRPT.KPI.DUBAND.HO.SUCC.RATE
ZK3182:Dual-Band Handover Success Rate per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703595
BSCRPT.INTRABSC.OUTCELL.HO.FAIL
ZCH313F:Failed BSC6900 Outgoing Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703596
BSCRPT.INTERBSC.OUTCELL.HO.FAIL
ZCH333F:Failed Outgoing External Inter-Cell Handovers per BSC
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703597
BSCRPT.KPI.DUBAND.HO.FAIL
ZK3173F:Failed Dual- BSC6900 Band Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278706449
BSCRPT.FR.UP.RX.QLTY.0.AVR
ZS4180SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 0) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
139/201
16/7/2015
Handover Feature Parameter Description
1278706450
BSCRPT.FR.UP.RX.QLTY.1.AVR
ZS4181SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 1) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706451
BSCRPT.FR.UP.RX.QLTY.2.AVR
ZS4182SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 2) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706452
BSCRPT.FR.UP.RX.QLTY.3.AVR
ZS4183SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 3) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706453
BSCRPT.FR.UP.RX.QLTY.4.AVR
ZS4184SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 4) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706454
BSCRPT.FR.UP.RX.QLTY.5.AVR
ZS4185SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 5) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706455
BSCRPT.FR.UP.RX.QLTY.6.AVR
ZS4186SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 6) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706456
BSCRPT.FR.UP.RX.QLTY.7.AVR
ZS4187SA:Number of BSC6900 MRs on Uplink TCHF (Mean Receive Quality Rank 7) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706457
BSCRPT.FR.DOWN.RX.QLTY.0.AVR
ZS4180SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 0) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706458
BSCRPT.FR.DOWN.RX.QLTY.1.AVR
ZS4181SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 1) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706459
BSCRPT.FR.DOWN.RX.QLTY.2.AVR
ZS4182SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 2) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706460
BSCRPT.FR.DOWN.RX.QLTY.3.AVR
ZS4183SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 3) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706461
BSCRPT.FR.DOWN.RX.QLTY.4.AVR
ZS4184SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 4) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706462
BSCRPT.FR.DOWN.RX.QLTY.5.AVR
ZS4185SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 5) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706463
BSCRPT.FR.DOWN.RX.QLTY.6.AVR
ZS4186SB:Number of BSC6900 MRs on Downlink TCHF (Mean Receive Quality Rank 6) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706464
BSCRPT.FR.DOWN.RX.QLTY.7.AVR
ZS4187SB:Number of BSC6900 MRs on Downlink
GBFD 110801
Processing of Measurement
TCHF (Mean Receive
GBFD-
Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
140/201
16/7/2015
Handover Feature Parameter Description BSC
of Measurement Report
1282412169
CELL.ASS.REQ.SIG.TCH.OPT.TIMEOUT
A3101J:Assignment BSC6900 Requests for Serving Cell (Maximum Better Cell Assigning Duration Timeout)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412170
C ELL. IN TR ABSC .OU TC ELL. HO. REQ. BETTER .D R. CELL
H 3100N :N umber of BSC6900 Outgoing Internal InterCell Handover Requests (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412171
C ELL. IN TR ABSC .OU TC ELL. HO. CMD .BETTE R. DR .CE LL
H 3110N :N umber of BSC6900 Outgoing Internal InterCell Handover Commands (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412172
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. BETTER .D R. CELL
H 3120N :N umber of Failed Outgoing Internal Inter-Cell Handovers (SDCCH) (Better Cell Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412173
C ELL. IN TER BSC .OU TC ELL. HO. REQ. BETTER .D R. CELL
H 3300N :N umber of Outgoing External Inter-Cell Handover Requests (SDCCH) (Better Cell Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412174
C ELL. IN TER BSC .OU TC ELL. HO. CMD .BETTE R. DR .CE LL
H 3310N :N umber of BSC6900 Outgoing External Inter-Cell Handover Commands (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412175
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. BETTER .D R. CELL
H 3320N :N umber of Failed Outgoing External Inter-Cell Handovers (SDCCH) (Better Cell Directed Retry)
BSC6900
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282429839
CELL.NO.DL.MR.NUM
CS3032:Number of BSC6900 Measurement Reports Without DL Measurement Information
GBFD- 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433049
CELLCELL.OUTCELL.CMD.DR
H371K:Outgoing Inter- BSC6900 Cell Handover Commands (Directed Retry)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433055
CELL.INTRACELL.HO.FAIL.UL.INTERFERE
H0021C:Number of BSC6900 Intra-cell Handover Failures Due to Uplink Interference
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282433056
CELL.INTRACELL.HO.FAIL.DL.INTERFERE
H0021D:Number of Intra-cell Handover Failures Due to Downlink Interference
BSC6900
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282433912
CELLCELL.OUT.CELL.HO.REQ. TIMES.FREQ.SHI FT
H375C:Number of Outgoing Inter-Cell Handover Requests (Frequency Offset Handover)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433913
CELLCELL.OUTCELL.CMD.FREQ.SHIFT
H375D:Number of Outgoing Inter-cell Handover Command Send Times (Frequency offset handover)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433914
CELLCELL.OUT.CELL.FAIL.TIMES.FREQ.SHIFT
H375F:Number of Failed Outgoing Intercell Handovers (Frequency Offset Handover)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433915
CELLCELL.OUT.CELL.HO.REQ. TIMES.FAST.PBGT
H375G:Number of Outgoing Inter-cell Handover Requests (Quick PBGT Handover)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433916
CELLCELL.OUTCELL.CMD.FAST.PBGT
H375H:Number of Outgoing Inter-cell
BSC6900
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
141/201
16/7/2015
Handover Feature Parameter Description Send Times (Quick PBGT Handover)
510501
Handover
1282433917
CELLCELL.OUT.CELL.FAIL.TIMES.FAST.PBGT
H375J:Number of BSC6900 GBFDFailed Outgoing Inter110601 cell Handovers (Quick GBFDPBGT Handover) 510501
HUAWEI I Handover HUAWEI II Handover
1282433945
CELL.HO.TIMES.DUR.STABLE.DTX.PER
H3119LD:Number of BSC6900 handovers during a stable DTX period
GBFD 115709 GBFD110601 GBFD510501
Smooth Voice Call Handover HUAWEI I Handover HUAWEI II Handover
1282433946
CELL.HO.TIMES.DUR.SPEECH.SIG.TRANS
H3119LS:Number of BSC6900 handovers during speech signal transmission
GBFD115709 GBFD110601 GBFD510501
Smooth Voice Call Handover HUAWEI I Handover HUAWEI II Handover
1282434373
CELL.INTRACELL.HO.CMD.UL.INTERFERE
H0021E:Number of Intra-BSC Intra-Cell Handover Command (Uplink Interference)
BSC6900
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282434374
CELL.INTRACELL.HO.CMD.DL.INTERFERE
H0021F:Number of BSC6900 Intra-BSC Intra-Cell Handover Command ( Downlink Interference)
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282448074
CELL.INTRABSC.INCELL.HO.REQ.TCH
CH3209A:Number of BSC6900 Incoming Internal InterCell Handover Requests (TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448075
CELL.INTRABSC.INCELL.HO.REQ.ACK.TCH
CH3219A:Number of BSC6900 Incoming Internal InterCell Handover Responses(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448076
CELL.INTRABSC.INCELL.HO.FAIL.TCH
CH3229A:Number of BSC6900 Failed Incoming Internal Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448077
CELL.INTERBSC.INCELL.HO.REQ.TOTAL.TCH
CH3409A:Number of BSC6900 Incoming External Inter-Cell Handover Requests(TCH)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448078
CELL.INTERBSC.INCELL.HO.REQ.ACK.TCH
CH3419A:Number of BSC6900 Incoming External Inter-Cell Handover Responses(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448079
CELL.INTERBSC.INCELL.HO.FAIL.TCH
CH3429A:Number of BSC6900 Failed Incoming External Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448080
CELL.INTRABSC.OUTCELL.HO.REQ.TCH
CH3109A:Number of BSC6900 Outgoing Internal InterCell Handover Requests(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448081
CELL.INTRABSC.OUTCELL.HO.CMD.TCH
CH3119A:Number of BSC6900 Outgoing Internal InterCell Handover Commands(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448082
CELL.INTRABSC.OUTCELL.HO.FAIL.TCH
CH3129A:Number of BSC6900 Failed Outgoing Internal Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448083
CELL.INTERBSC.OUTCELL.HO.REQ.TCH
CH3309A:Number of BSC6900 Outgoing External Inter-Cell Handover Requests(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448084
CELL.INTERBSC.OUTCELL.HO.CMD.TCH
CH3319A:Number of BSC6900 Outgoing External Inter-Cell Handover Commands(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448085
CELL.INTERBSC.OUTCELL.HO.FAIL.TCH
CH3329A:Number of BSC6900 Failed Outgoing External Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282450421
CELLCELL.OUT.CELL.HO.SUCC.TIMES.FREQ.SHI FT
H375E: Number of Successful Outgoing Inter-Cell Handovers (Frequency Offset Handover)
BSC6900
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282450422
CELLCELL.OUT.CELL.HO.SUCC.TIMES.FAST.PBGT
H375I: Number of Successful Outgoing
BSC6900
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
142/201
16/7/2015
Handover Feature Parameter Description (Quick PBGT Handover)
510501
Handover
1278072527
CELL.A.CLR.REQ.TCH.TRAF.HO
CM339B:Clear BSC6910 Requests Sent on the A interface in Handover State (TCH) (Traffic Channel)
GBFD110501 GBFD110601 GBFD510501
Call Control HUAWEI I Handover HUAWEI II Handover
1278073469
CELL.INTRA.CELL.HO.CH.ACT
CR333A:Channel BSC6910 Activation Attempts in Internal Intra-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073470
CELL.INTRABSC.INCELL.HO.CH.ACT
CR334A:Channel BSC6910 Activation Attempts in Incoming Internal InterCell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073471
CELL.INTERBSC.INCELL.HO.CH.ACT
CR335A:Channel BSC6910 Activation Attempts in Incoming External Inter-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073476
CELL.INTRA.CELL.HO.CH.ACT.NACK
CR333B:CHAN ACTIV NACK Messages Sent by BTS in Internal IntraCell Handover Procedure
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073477
CELL.INTRABSC.INCELL.HO.CH.ACT.NACK
CR334B:CHAN ACTIV NACK Messages Sent by BTS in Incoming Internal Inter-Cell Handover Procedure
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073478
CELL.INTERBSC.INCELL.HO.CH.ACT.NACK
CR335B:CHAN ACTIV NACK Messages Sent by BTS in Incoming External Inter-Cell Handover Procedure
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073483
CELL.INTRA.CELL.HO.CH.ACT.EXP
CR333C:Channel BSC6910 Activation Timeouts in Internal Intra-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073484
CELL.INTRABSC.INCELL.HO.CH.ACT.EXP
CR334C:Channel BSC6910 Activation Timeouts in Incoming Internal InterCell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278073485
CELL.INTERBSC.INCELL.HO.CH.ACT.EXP
CR335C:Channel BSC6910 Activation Timeouts in Incoming External Inter-Cell Handover Procedure
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074425
TRX.HO.CMD.SD
R4430A:Attempted Handovers (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278074426
TRX.HO.CMD.TCH
R4439A:Attempted Handovers (TCH)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074427
TRX.HO.CMPL.SD
R4430B:Completed Handovers (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278074428
TRX.HO.CMPL.TCH
R4439B:Completed Handovers (TCH)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074431
TRX.HO.CMD
CR443A:Attempted Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278074432
TRX.HO.SUCC
CR443B:Completed Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278076465
CELL.ASS.FAIL.Frst.DR.NO.CH
A312K:Failed
BSC6910
GBFD-
Assignment and
110502
Immediate
Assignments (First
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
143/201
16/7/2015
Handover Feature Parameter Description No Channel Available in Directed Retry Procedure)
110607
Direct Retry
1278076466
CELL.ASS.FAIL.Frst.DR.EXP
A3129O:Failed Assignments (First Assignment Directed Retry Timed Out)
BSC6910
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076471
CELL.ASS.FAIL.RECONN.SUCC.DR.NO.CH
A312M:Failed Assignments (Reconnection to Old Channels No Channel Available in Directed Retry)
BSC6910
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076472
CELL.ASS.FAIL. RECONN.SUCC.DR.RECONN.SUCC
A3129R:Failed Assignments (Reconnection to Old Channels Reconnection to Old Channel in Directed Retry)
BSC6910
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278076473
CELL.ASS.FAIL.RECONN.SUCC.DR.EXP
A3129Q:Failed Assignments (Reconnection to Old Channels Timer Expired in Directed Retry)
BSC6910
GBFD110502 GBFD110607
Assignment and Immediate Assignment Direct Retry
1278077417
CELL.INTRACELL.HO.REQ.SD
H3000:Internal IntraCell Handover Requests (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077418
CELL.INTRACELL.HO.REQ.TCH
H3009:Internal IntraCell Handover Requests (TCH)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077419
CELL.INTRACELL.HO.CMD.SD
H3010:Internal Intra- BSC6910 Cell Handover Commands (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077420
CELL.INTRACELL.HO.CMD.TCHF
H3017:Internal IntraCell Handover Commands (TCHF)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077422
CELL.INTRACELL.HO.FAIL.SD
H3020:Failed Internal Intra-Cell Handovers (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077423
CELL.INTRACELL.HO.FAIL.TCH
H3029:Failed Internal Intra-Cell Handovers (TCH)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077424
CELL.INTRACELL.HO.FAIL.CONG.SD
H3020A:Failed Internal BSC6910 Intra-Cell Handovers (No Channel Available) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077425
CELL.INTRACELL.HO.FAIL.CONG.TCH
H3029A:Failed Internal BSC6910 Intra-Cell Handovers (No Channel Available) (TCH)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077426
CELL.INTRACELL.HO.FAIL.APPLY.TRSL.FAIL
H302B:Failed Internal BSC6910 Intra-Cell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077427
CELL.INTRACELL.HO.FAIL.A.INTERF.FAIL
H302G:Failed Internal BSC6910 Intra-Cell Handovers (A Interface Failure)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077428
CELL.INTRACELL.HO.FAIL.EXP.SD
H3020C:Failed Internal BSC6910 Intra-Cell Handovers (Timer Expired) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077429
CELL.INTRACELL.HO.FAIL.EXP.TCHF.SIG
H3027Cb:Failed
GBFD-
HUAWEI I
110601
Handover
Internal Intra-Cell
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
144/201
16/7/2015
Handover Feature Parameter Description Expired) (TCHF) (Signaling Channel)
510501
Handover
1278077431
CELL.INTRACELL.HO.FAIL.EXP.TCHF.TRAF
H3027Ca:Failed Internal Intra-Cell Handovers (Timer Expired) (TCHF) (Traffic Channel)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077433
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.UNSPEC
H302Da:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077434
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.CH.UNAC
H302Db:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077435
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.TM.EXP
H302Dc:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077436
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.RLS.NO.ACT
H302Dd:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Abnormal Release No Activity on the Radio Path)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077437
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT.RLS
H302De:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077438
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.IMPSBL.TA
H302Df:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077439
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CH.MODEL
H302Dg:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077440
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ.NOT.IMP
H302Dh:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077441
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.CALL.CLR
H302Di:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077442
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.SMN.INCRCT.MSG
H302Dj:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077443
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.INVLID.MAN.INFO
H302Dk:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077444 CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NONEXT
H302Dl:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Message Type Non-existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077445
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NOT.CM
H302Dm:Failed Internal Intra-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077446
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.CDT.IE.ERR
H302Dn:Failed Internal BSC6910 Intra-Cell Handovers
GBFD110601
HUAWEI I Handover
(Reconnection to Old
GBFD-
HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
145/201
16/7/2015
Handover Feature Parameter Description IE Error)
1278077447
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CELL.ALLOC
H302Do:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (No Cell Allocation Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077448 CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.PTCL.ERR.UNSPEC
H302Dp:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077449
CELL.INTRACELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H302Dq:Failed Internal BSC6910 Intra-Cell Handovers (Reconnection to Old Channels) (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077472
CELL.INTRACELL.HO.REQ.AMR.TCHF.TCHH
H3005A:Internal Intra- BSC6910 Cell Handover Requests (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077473
CELL.INTRACELL.HO.REQ.AMR.TCHH.TCHF
H3005B:Internal Intra- BSC6910 Cell Handover Requests (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077474
CELL.INTRACELL.HO.CMD.AMR.TCHF.TCHH
H3015A:Internal Intra- BSC6910 Cell Handover Commands (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077475
CELL.INTRACELL.HO.CMD.AMR.TCHH.TCHF
H3015B:Internal Intra- BSC6910 Cell Handover Commands (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077476
CELL.INTRACELL.HO.FAIL.AMR.TCHF.TCHH
H3025A:Failed Internal BSC6910 Intra-Cell Handovers (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077477
CELL.INTRACELL.HO.FAIL.AMR.TCHH.TCHF
H3025B:Failed Internal BSC6910 Intra-Cell Handovers (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077478
CELL.INTRACELL.HO.DETECT.SD
H3040:Internal IntraCell Handover Detection Messages Received by BSC (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278077479
CELL.INTRACELL.HO.DETECT.TCHF
H3047:Internal IntraCell Handover Detection Messages Received by BSC (TCHF)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077481
CELL.INTRACELL.HO.REQ
CH300:Internal IntraCell Handover Requests
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077482
CELL.INTRACELL.HO.SUCC
CH303:Successful Internal Intra-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077483
CELL.INTRACELL.HO.SUCC.RATE
TH303:Success Rate BSC6910 of Internal Intra-Cell Handover
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077486
CELL.INTRACELL.HO.CMD
CH301:Internal IntraCell Handover Commands
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077487
CELL.INTRACELL.HO.DETECT
CH304:Internal IntraCell Handover Detection Messages Received by BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077488
CELL.INTRACELL.HO.FAIL
CH302:Failed Internal BSC6910 Intra-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077489
CELL.INTRACELL.HO.FAIL.CONG
CH302A:Failed Internal Intra-Cell Handovers (No Channel Available)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077490
CELL.INTRACELL.HO.FAIL.EXP
CH302C:Failed Internal Intra-Cell Handovers (Timer Expiry)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077491
CELL.INTRACELL.HO.FAIL.RECONN.SUCC
CH302D:Failed
BSC6910
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
146/201
16/7/2015
Handover Feature Parameter Description Handovers (Reconnection to Old Channels)
GBFD510501
HUAWEI II Handover
1278077498
CELL.INTRACELL.HO.SUCC.RATE.AMR.TCHF. TCHH
TH3035A:Suc cess Rate of Internal IntraCell Handover (AMR) (TCHF-TCHH)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077499
CELL.INTRACELL.HO.SUCC.RATE.AMR.TCHH.TCHF
TH3035B:Suc cess Rate of Internal IntraCell Handover (AMR) (TCHH-TCHF)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077506
CELL.INTRACELL.HO.SUCC.AMR.TCHF.TCHH
CH3035A:Successful BSC6910 Internal Intra-Cell Handovers (AMR) (TCHF-TCHH)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077507
CELL.INTRACELL.HO.SUCC.AMR.TCHH.TCHF
CH3035B:Successful BSC6910 Internal Intra-Cell Handovers (AMR) (TCHH-TCHF)
GBFD115504
AMR FR/HR Dynamic Adjustment
1278077508
CELL.INTRACELL.HO.REQ.UL.INTERFERE
CH3036A:Internal Intra-Cell Handover Requests due to Uplink Intervention
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077509
CELL.INTRACELL.HO.REQ.DL.INTERFERE
CH3036B:Internal Intra-Cell Handover Requests due to Downlink Intervention
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077522
CELL.INTRACELL.HO.FAIL.NO.IDLE.ABIS
H302E:Number of BSC6910 Intra-BSC Intra-Cell Handover Failures Due to No Abis Resources Available
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077523
CELL.INTRACELL.HO.FAIL.NO.SPEECH.VER
H302H:Failed Internal BSC6910 Intra-Cell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077524
CELL.INTRACELL.HO.FAIL.CHACT.FAIL
H302I:Failed Internal Intra-Cell Handovers (Channel Activation Failed)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077525
CELL.TCH.HO.DROP
RH333:Handover Drop BSC6910 Rate of TCH
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077526
CELL.INTRABSC.HO.SUCC.RATE
RH303B:Intra-BSC Handover Success Rate
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278077527
CELL.INTRABSC.RD.HO.SUCC.RATE
RH303C:Intra-BSC Radio Handover Success Rate
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078417
CELL.INTRABSC.INCELL.HO.REQ.SD.900.900
H3200W:Number of BSC6910 Incoming Internal InterCell Handover Requests (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078418
CELL.INTRABSC.INCELL.HO.REQ.SD.1800.1800
H3200X:Number of BSC6910 Incoming Internal InterCell Handover Requests (SDCCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078419
CELL.INTRABSC.INCELL.HO.REQ.SD.900.1800
H3200Y:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDRequests (SDCCH) 510501 (900/850/810GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078420
CELL.INTRABSC.INCELL.HO.REQ.SD.1800.900
H3200Z:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDRequests (SDCCH) 510501 (1800/1900GBFD900/850/810) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078421
CELL.INTRABSC.INCELL.HO.REQ.TCH.900.900
H3209W:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDRequests (TCH) 510501 (900/850/810900/850/810)
HUAWEI I Handover HUAWEI II Handover
1278078422
CELL.INTRABSC.INCELL.HO.REQ.TCH.1800.1800
H3209X:Number of
HUAWEI I
BSC6910
G BFD-
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
147/201
16/7/2015
Handover Feature Parameter Description Cell Handover Requests (TCH) (1800/1900-1800/1900)
GBFD510501
HUAWEI II Handover
1278078423
CELL.INTRABSC.INCELL.HO.REQ.TCH.900.1800
H3209Y:Number of BSC6910 Incoming Internal InterCell Handover Requests (TCH) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078424
CELL.INTRABSC.INCELL.HO.REQ.TCH.1800.900
H3209Z:Number of BSC6910 Incoming Internal InterCell Handover Requests (TCH) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078425
CELL.INTRABSC.INCELL.HO.CMD.SD.900.900
H3210W:Number of BSC6910 Incoming Internal InterCell Handover Responses (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078426
CELL.INTRABSC.INCELL.HO.CMD.SD.1800.1800
H3210X:Number of BSC6910 Incoming Internal InterCell Handover Responses (SDCCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078427
CELL.INTRABSC.INCELL.HO.CMD.SD.900.1800
H3210Y:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDResponses (SDCCH) 510501 (900/850/810GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078428
CELL.INTRABSC.INCELL.HO.CMD.SD.1800.900
H3210Z:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDResponses (SDCCH) 510501 (1800/1900GBFD900/850/810) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078429
CELL.INTRABSC.INCELL.HO.CMD.TCHF.900.900
H3217W:Number of BSC6910 Incoming Internal InterCell Handover Responses (TCHF) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078430
CELL.INTRABSC. INCELL.HO.CMD.TCHF.1800.1800
H3217X:Number of BSC6910 Incoming Internal InterCell Handover Responses (TCHF) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078431
CELL.INTRABSC. INCELL.HO.CMD.TCHF.900.1800
H3217Y:Number of BSC6910 Incoming Internal InterCell Handover Responses (TCHF) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078432
CELL.INTRABSC. INCELL.HO.CMD.TCHF.1800.900
H3217Z:Number of BSC6910 Incoming Internal InterCell Handover Responses (TCHF) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078437
CELL.INTRABSC.INCELL.HO.FAIL.SD.900.900
H3220W:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (SDCCH) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078438
CELL.INTRABSC. INCELL.HO.FAIL.SD.1800. 1800
H3220X:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers 510501 (SDCCH) (1800/1900GBFD1800/1900) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078439
CELL.INTRABSC.INCELL.HO.FAIL.SD.900.1800
H3220Y:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers 510501 (SDCCH) GBFD(900/850/810110608 1800/1900)
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078440
CELL.INTRABSC.INCELL.HO.FAIL.SD.1800.900
H3220Z:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers 510501 (SDCCH) (1800/1900GBFD-
HUAWEI I Handover HUAWEI II Handover SDCCH
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
148/201
16/7/2015
Handover Feature Parameter Description
1278078441
CELL.INTRABSC.INCELL.HO.FAIL.TCH.900.900
H3229W:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (900/850/810900/850/810)
HUAWEI I Handover HUAWEI II Handover
1278078442
CELL.INTRABSC. INCELL.HO.FAIL.TCH.1800.1800
H3229X:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (TCH) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078443
CELL.INTRABSC. INCELL.HO.FAIL.TCH.900.1800
H3229Y:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (900/850/8101800/1900)
HUAWEI I Handover HUAWEI II Handover
1278078444
CELL.INTRABSC. INCELL.HO.FAIL.TCH.1800.900
H3229Z:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (TCH) 510501 (1800/1900900/850/810)
HUAWEI I Handover HUAWEI II Handover
1278078445
CELL.INTRABSC.INCELL.HO.FAIL.CONG.SD
H3220A:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (No Channel Available) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078446
CELL.INTRABSC.INCELL.HO.FAIL.CONG.TCH
H3229A:Number of BSC6910 GBFDUnsuccessful 110601 Incoming Internal InterGBFDCell Handovers (No 510501 Channel Available) (TCH)
HUAWEI I Handover HUAWEI II Handover
1278078447
C ELL. IN TR ABSC .I NC ELL. HO. FAI L. APPLY. TRS L. FAI L
H 322B: Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078448
C ELL. IN TR ABSC .I NC ELL. HO. FAI L. REC ON N. SU CC ESS
H 322D :N umber of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Reconnection to Old Channels Canceled)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078449
CELL.INTRABSC. INCELL.HO.FAIL.A.I NTERF.FAIL
H322G:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Failure on A Interface)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078450
CELL.INTRABSC.INCELL.HO.FAIL.EXP.SD
H3220C:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078451
CELL.INTRABSC. INCELL.HO.FAIL.EXP. TCHF.SIG
H3227Cb:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (TCHF) (Signaling Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078453
CELL.INTRABSC. INCELL.HO.FAIL.EXP. TCHF.TRAF
H3227Ca:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired) (TCHF) (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078455
CELL.INTRABSC.INCELL.HO.DETECT.SD
H3240:Number of BSC6910 GBFDIncoming Internal Inter110601 Cell Handover GBFDDetection Messages 510501 Received by BSC GBFD(SDCCH) 110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278078456
CELL.INTRABSC.INCELL.HO.DETECT.TCHF
H3247:Number of BSC6910 Incoming Internal InterCell Handover Detection Messages Received by BSC (TCHF)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078458
CELL.INTRABSC.INCELL.HO.REQ
CH320:Number of BSC6910 Incoming Internal InterCell Handover Requests
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078459
CELL.INTRABSC.INCELL.HO.SUCC
CH323:Number of
GBFD-
HUAWEI I
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
149/201
16/7/2015
Handover Feature Parameter Description uccess u ncom ng Internal Inter-Cell Handovers
GBFD510501
an over HUAWEI II Handover
1278078460
CELL.INTRABSC.INCELL.HO.SUCC.RATE
TH323:Success Rate BSC6910 of Incoming Internal Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078461
CELL.INTRABSC.INCELL.HO.FAIL
CH322:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078462
CELL.INTRABSC.INCELL.HO.DETECT
CH324:Number of BSC6910 Incoming Internal InterCell Handover Detection Messages Received by BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078463
CELL.INTRABSC.INCELL.HO.REQ.ACK
CH321:Number of BSC6910 Incoming Internal InterCell Handover Responses
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078464
CELL.INTRABSC.INCELL.HO.FAIL.TIMEOUR
CH322C:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078478
CELL.INTRABSC.INCELL.HO.FAIL.NO.IDLE.ABIS
H322M:Number of BSC6910 Unsuccessful Incoming Internal InterCell Handovers (No Abis Resources Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078479
C ELL. IN TR ABSC .I NC ELL. CLEA R. CMD .BEFOR E. HO. CMD
H 325A: Inc oming Internal Inter-Cell Handover Clear Cmd Times (Before Handover Response)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078480
C ELL. IN TR ABSC .I NC ELL. CLEA R. CMD .AFTER .H O. CMD
H 325B: Inc oming BSC6910 Internal Inter-Cell Handover Clear Cmd Times (After Handover Response)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078481
CELL.INTRABSC. INCELL.HO.FAIL.NO.SPEECH.VER
H322H:Failed BSC6910 Incoming Internal InterCell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078482
CELL.INTRABSC. INCELL.HO.FAIL.CHACT.FAIL
H322I: Failed I nc oming BSC6910 Internal Inter-Cell Handovers (Channel Activation Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078483
CELL.HO.SUCC.RATE
RH303:Handover Success Rate
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078484
CELL.RD.HO.SUCC.RATE
RH303A:Success Rate of Radio Handover
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078485
CELL.DOUBLE.FH.HO.SUCC.RATE.900.1800
RH303F:Success Rate of Dual-Band Handovers (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078486
CELL.DOUBLE.FH.HO.SUCC.RATE.1800.900
RH303G:Success Rate of Dual-Band Handovers (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078492
CELL.INTRABSC.INCELL.HO.FAIL.900.1800
RH3031F:Failed BSC6910 Incoming Internal InterCell Handovers (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078493
CELL.INTRABSC.INCELL.HO.FAIL.1800.900
RH3032F:Failed BSC6910 Incoming Internal InterCell Handovers (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078494
CELL.INTERBSC. IN.CELL.HO.FAI L.TIMES.900. 1800
RH3033F:Failed Incoming External Inter-Cell Handovers (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078495
CELL.INTERBSC. IN.CELL.HO.FAI L.TIMES.1800.900
RH3034F:Failed Incoming External
BSC6910
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
150/201
16/7/2015
Handover Feature Parameter Description (1800/1900900/850/810)
510501
Handover
1278078496
CELL.INTERBSC.OUTCELL.HO.FAIL.900.1800
RH3035F:Failed Outgoing External Inter-Cell Handovers (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078497
CELL.INTERBSC.OUTCELL.HO.FAIL.1800.900
RH3036F:Failed Outgoing External Inter-Cell Handovers (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078498
CELL.INTRABSC.INCELL.HO.REQ.900.1800
RH3031G:Incoming Internal Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078499
CELL.INTRABSC.INCELL.HO.REQ.1800.900
RH3032G:Incoming Internal Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078500
CELL.INTERBSC. IN.CELL.HO.REQ.TI MES. 900.1800
RH3033G:Inc oming External Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078501
CELL.INTERBSC. IN.CELL.HO.REQ.TI MES. 1800.900
RH3034G:Inc oming External Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078502
CELL.INTERBSC.OUTCELL.HO.REQ.900.1800
RH3035G:Outgoing External Inter-Cell Handover Requests (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278078503
CELL.INTERBSC.OUTCELL.HO.REQ.1800.900
RH3036G:Outgoing External Inter-Cell Handover Requests (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079417
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.900
H3100W:Number of BSC6910 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079418
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.1800
H3100X:Number of BSC6910 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079419
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.1800
H3100Y:Number of BSC6910 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079420
CELL.INTRABSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.900
H3100Z:Number of BSC6910 Outgoing Internal InterCell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079421
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.900.900
H3107W:Number of BSC6910 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079422
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.1800.1800
H3107X:Number of BSC6910 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079423
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.900.1800
H3107Y:Number of BSC6910 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
510501
Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
151/201
16/7/2015
Handover Feature Parameter Description 1800/1900)
1278079424
CELL.INTRABSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDE.DR.1800.900
H3107Z:Number of BSC6910 Outgoing Internal InterCell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079429
CELL.INTRABSC.OUTCELL.HO.REQ.DR.900.900
H3101W:Number of BSC6910 GBFDOutgoing Internal Inter110601 Cell Handover GBFDRequests (Directed 510501 Retry) (900/850/810GBFD900/850/810) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079430
CELL.INTRABSC. OUTCELL.HO.REQ.DR.1800.1800
H3101X:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079431
CELL.INTRABSC. OUTCELL.HO.REQ.DR.900.1800
H3101Y:Number of BSC6910 GBFDOutgoing Internal Inter110601 Cell Handover GBFDRequests (Directed 510501 Retry) (900/850/810GBFD1800/1900) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079432
CELL.INTRABSC. OUTCELL.HO.REQ.DR.1800.900
H3101Z:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079433
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.900
H3110W:Number of BSC6910 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079434
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.1800
H3110X:Number of BSC6910 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079435
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.1800
H3110Y:Number of BSC6910 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079436
CELL.INTRABSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.900
H3110Z:Number of BSC6910 Outgoing Internal InterCell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079437
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.900
H3117W:Number of BSC6910 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079438
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.1800
H3117X:Number of BSC6910 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079439
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.1800
H3117Y:Number of BSC6910 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079440
CELL.INTRABSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.900
H3117Z:Number of BSC6910 Outgoing Internal InterCell Handover Commands (TCHF) (Excluding Directed Retry) (1800/1900-
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
900/850/810)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
152/201
16/7/2015
Handover Feature Parameter Description
1278079445
CELL.INTRABSC.OUTCELL.HO.CMD.DR.900.900
H3111W:Number of BSC6910 GBFDOutgoing Internal Inter110601 Cell Handover GBFDCommands (Directed 510501 Retry) (900/850/810GBFD900/850/810) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079446
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 1800.1800
H3111X:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Directed Retry) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079447
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 900.1800
H3111Y:Number of BSC6910 GBFDOutgoing Internal Inter110601 Cell Handover GBFDCommands (Directed 510501 Retry) (900/850/810GBFD1800/1900) 110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079448
CELL.INTRABSC. OUTCELL.HO.CMD. DR. 1800.900
H3111Z:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079449
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.900
H3120W:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079450
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.1800
H3120X:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079451
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.1800
H3120Y:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079452
CELL.INTRABSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.900
H3120Z:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079453
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.900
H3127W:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079454
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.1800
H3127X:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079455
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.1800
H3127Y:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079456
CELL.INTRABSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.900
H3127Z:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079461
CELL.INTRABSC.OUTCELL.HO.FAIL.DR.900.900
H3121W:Number of BSC6910 GBFDUnsuccessful 110601 Outgoing Internal InterCell Handovers GBFD-
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
HUAWEI II
153/201
16/7/2015
Handover Feature Parameter Description (900/850/810900/850/810)
GBFD110607
Direct Retry
1278079462
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.1800.1800
H3121X:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079463
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.900.1800
H3121Y:Number of BSC6910 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Directed Retry) GBFD(900/850/810110607 1800/1900)
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079464
CELL.INTRABSC. OUTCELL.HO.FAIL.DR.1800.900
H3121Z:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Directed Retry) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079465
CELL.INTRABSC.OUTCELL.HO.FAIL.CONG
H312A:Number of Failed Outgoing Internal Inter-Cell Handovers (No Channel Available)
BSC6910 GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079466
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. APP LY. TR SL. FAI L
H 312B: Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Terrestrial Resource Request Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079467
CELL.INTRABSC. OUTCELL.HO.FAIL.A.I NTERF.FAIL
H312G:Number of Failed Outgoing Internal Inter-Cell Handovers (A Interface Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079468
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.SD.NOT.INCLUDE.DR
H3120C:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (SDCCH) (Excluding Directed Retry)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278079469
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.TCHF.SIG.NOT.INCLUDE.DR
H3127Cb:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (TCHF) (Signaling Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079471
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.TCHF.TRAF.NOT.INCLUDE.DR
H3127Ca:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (TCHF) (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079473
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP.DR
H3121C:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired) (Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278079474
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.UN S H312Da:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079475
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.CH N H312Db:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079476
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.EXP H312Dc:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Timer Expired)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
154/201
16/7/2015
Handover Feature Parameter Description
1278079477
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.REL.NO.ACT
H312Dd:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release No Activity on the Radio Path)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079478
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT
H312De:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079479
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.TA
H312Df:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079480
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CH.MODE
H312Dg:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079481
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ
H312Dh:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079482
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.C.CLR
H312Di:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079483
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.SEMANT
H312Dj:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079484
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.INV.MAN
H312Dk:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079485
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.M.T.NE
H312Dl:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Non-Existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079486
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.M.T.NC
H312Dm:Number of Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079487
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CONDIT
H312Dn:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Conditional IE Error)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079488
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CA
H312Do:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (No Cell Allocation Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
155/201
16/7/2015
Handover Feature Parameter Description Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified) BSC6910
110601 GBFD510501
Handover HUAWEI II Handover
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079490
CELL.INTRABSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H312Dq:Number of Failed Outgoing Internal Inter-Cell Handovers (Reconnection to Old Channels) (Other Causes)
1278079491
CELL.INTRABSC.OUTCELL.HO.REQ.UL.QLTY
H310A:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079492
CELL.INTRABSC.OUTCELL.HO.REQ.DL.QLTY
H310B:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079493
CELL.INTRABSC.OUTCELL.HO.REQ.UL.RXL
H310C:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079494
CELL.INTRABSC.OUTCELL.HO.REQ.DL.RXL
H310D:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079495
CELL.INTRABSC.OUTCELL.HO.REQ.TA
H310E:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079496
CELL.INTRABSC. OUTCELL.HO.REQ.BETTER.CELL
H310F:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079497
CELL.INTRABSC.OUTCELL.HO.REQ.LOAD
H310G:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079498
C ELL. IN TR ABSC .OU TC ELL. HO. REQ. RAPI D. LEV. DR OP
H 310H :N umber of BSC6910 Outgoing Internal InterCell Handover Requests (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079499
CELL.INTRABSC.OUTCELL.HO.REQ.MSC.INTERVENTION
H310I:Number of BSC6910 Outgoing Internal InterCell Handover Requests (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079500
CELL.INTRABSC.OUTCELL.HO.REQ.OM.INTERVENTION
H310J:Number of BSC6910 Outgoing Internal InterCell Handover Requests (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079502
CELL.INTRABSC.OUTCELL.HO.REQ.OTHER
H310L:Number of BSC6910 Outgoing Internal InterCell Handover Requests (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079503
CELL.INTRABSC.OUTCELL.HO.CMD.UL.QLTY
H311A:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079504
CELL.INTRABSC.OUTCELL.HO.CMD.DL.QLTY
H311B:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079505
CELL.INTRABSC.OUTCELL.HO.CMD.UL.RXL
H311C:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079506
CELL.INTRABSC.OUTCELL.HO.CMD.DL.RXL
H311D:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079507
CELL.INTRABSC.OUTCELL.HO.CMD.TA
H311E:Number of
GBFD-
HUAWEI I
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
156/201
16/7/2015
Handover Feature Parameter Description Cell Handover Commands (Timing Advance)
GBFD510501
HUAWEI II Handover
1278079508
CELL.INTRABSC. OUTCELL.HO.CMD. BETTER. CELL
H311F:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079509
CELL.INTRABSC.OUTCELL.HO.CMD.LOAD
H311G:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079510
C ELL. IN TR ABSC .OU TC ELL. HO. CMD .RA PI D. LE V. DR OP
H 311H :N umber of BSC6910 Outgoing Internal InterCell Handover Commands (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079511
CELL.INTRABSC.OUTCELL.HO.CMD.MSC.INTERVENTION
H311I:Number of BSC6910 Outgoing Internal InterCell Handover Commands (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079512
CELL.INTRABSC.OUTCELL.HO.CMD.OM.INTERVENTION
H311J:Number of BSC6910 Outgoing Internal InterCell Handover Commands (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079514
CELL.INTRABSC.OUTCELL.HO.CMD.OTHER
H311L:Number of BSC6910 Outgoing Internal InterCell Handover Commands (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079515
CELL.INTRABSC.OUTCELL.HO.FAIL.UL.QLTY
H3122A:Number of BSC6910 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Uplink Quality)
HUAWEI I Handover HUAWEI II Handover
1278079516
CELL.INTRABSC.OUTCELL.HO.FAIL.DL.QLTY
H3122B:Number of BSC6910 GBFDUnsuccessful 110601 Outgoing Internal InterGBFDCell Handovers 510501 (Downlink Quality)
HUAWEI I Handover HUAWEI II Handover
1278079517
CELL.INTRABSC.OUTCELL.HO.FAIL.UL.RXL
H3122C:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079518
CELL.INTRABSC.OUTCELL.HO.FAIL.DL.RXL
H3122D:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079519
CELL.INTRABSC.OUTCELL.HO.FAIL.TA
H3122E:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timing Advance)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079520
CELL.INTRABSC. OUTCELL.HO.FAIL.BETTER.CELL
H3122F:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079521
CELL.INTRABSC.OUTCELL.HO.FAIL.LOAD
H3122G:Number of Failed Outgoing Internal Inter-Cell Handovers (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079522
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. RAPI D. LEV. DR OP
H 3122H :N umber of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079523
CELL.INTRABSC.OUTCELL.HO.FAIL.MSC.INTERVENTION
H3122I:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079524
CELL.INTRABSC.OUTCELL.HO.FAIL.OM.INTERVENTION
H3122J:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079526
CELL.INTRABSC.OUTCELL.HO.FAIL.OTHER
H3122L:Number of BSC6910 Unsuccessful Outgoing Internal Inter-
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
510501
Handover
Cell Handovers (Other
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
157/201
16/7/2015
Handover Feature Parameter Description
1278079527
CELL.INTRABSC.OUTCELL.HO.REQ
CH310:Number of BSC6910 Outgoing Internal InterCell Handover Requests
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079528
CELL.INTRABSC.OUTCELL.HO.SUCC
CH313:Number of Successful Outgoing Internal Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079529
CELL.INTRABSC.OUTCELL.HO.FAIL
CH312:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079530
CELL.INTRABSC.OUTCELL.HO.SUCC.RATE
TH313:Success Rate BSC6910 of Outgoing Internal Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079531
CELL.INTRABSC.OUTCELL.HO.CMD
CH311:Number of BSC6910 Outgoing Internal InterCell Handover Commands
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079532
CELL.INTRABSC.OUTCELL.HO.FAIL.EXP
CH312C:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Timer Expired)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079533
CELL.INTRABSC. OUTCELL.HO.FAIL.RECONN.SUCC
CH312D:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Reconnection to Old Channels)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079544
CELL.INTRABSC. OUTCELL.HO.FAIL.NO.IDLE.ABIS
H312L:Number of BSC6910 Intra-BSC Outgoing Cell Handover Failures Due to No Abis Resources Available
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079554
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. NO. SPEE CH .VER
H 312H :N umber of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278079555
CELL.INTRABSC.OUTCELL.HO.FAIL.CHACT.FAIL
H312I:Number of BSC6910 Unsuccessful Outgoing Internal InterCell Handovers (Channel Activation Failed)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080417
CELL.INTERBSC.INCELL.HO.REQ.SD.900.900
H3400W:Incoming External Inter-Cell Handover Requests (SDCCH) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080418
CELL.INTERBSC.INCELL.HO.REQ.SD.1800.1800
H3400X:Incoming BSC6910 External Inter-Cell Handover Requests (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080419
CELL.INTERBSC.INCELL.HO.REQ.SD.900.1800
H3400Y:Incoming External Inter-Cell Handover Requests (SDCCH) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080420
CELL.INTERBSC.INCELL.HO.REQ.SD.1800.900
H3400Z:Incoming BSC6910 External Inter-Cell Handover Requests (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080421
CELL.INTERBSC.INCELL.HO.REQ.TCH.900.900
H3409W:Incoming External Inter-Cell Handover Requests (TCH) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080422
CELL.INTERBSC. INCELL.HO.REQ.TCH.1800.1800
H3409X:Incoming External Inter-Cell Handover Requests (TCH) (1800/19001800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080423
CELL.INTERBSC.INCELL.HO.REQ.TCH.900.1800
H3409Y:Incoming External Inter-Cell
BSC6910
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
158/201
16/7/2015
Handover Feature Parameter Description (TCH) (900/850/8101800/1900)
510501
Handover
1278080424
CELL.INTERBSC.INCELL.HO.REQ.TCH.1800.900
H3409Z:Incoming External Inter-Cell Handover Requests (TCH) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080425
CELL.INTERBSC.INCELL.HO.CMD.SD.900.900
H3410W:Incoming External Inter-Cell Handover Responses (SDCCH) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080426
CELL.INTERBSC.INCELL.HO.CMD.SD.1800.1800
H3410X:Incoming BSC6910 External Inter-Cell Handover Responses (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080427
CELL.INTERBSC.INCELL.HO.CMD.SD.900.1800
H3410Y:Incoming External Inter-Cell Handover Responses (SDCCH) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080428
CELL.INTERBSC.INCELL.HO.CMD.SD.1800.900
H3410Z:Incoming BSC6910 External Inter-Cell Handover Responses (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080429
CELL.INTERBSC.INCELL.HO.CMD.TCHF.900.900
H3417W:Incoming External Inter-Cell Handover Responses (TCHF) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080430
CELL.INTERBSC. INCELL.HO.CMD.TCHF.1800.1800
H3417X:Incoming External Inter-Cell Handover Responses (TCHF) (1800/19001800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080431
CELL.INTERBSC. INCELL.HO.CMD.TCHF.900.1800
H3417Y:Incoming External Inter-Cell Handover Responses (TCHF) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080432
CELL.INTERBSC. INCELL.HO.CMD.TCHF.1800.900
H3417Z:Incoming External Inter-Cell Handover Responses (TCHF) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080437
CELL.INTERBSC.INCELL.HO.FAIL.SD.900.900
H3420W:Failed Incoming External Inter-Cell Handovers (SDCCH) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080438
CELL.INTERBSC.INCELL.HO.FAIL.SD.1800.1800
H3420X:Failed BSC6910 Incoming External Inter-Cell Handovers (SDCCH) (1800/19001800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080439
CELL.INTERBSC.INCELL.HO.FAIL.SD.900.1800
H3420Y:Failed Incoming External Inter-Cell Handovers (SDCCH) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080440
CELL.INTERBSC.INCELL.HO.FAIL.SD.1800.900
H3420Z:Failed BSC6910 Incoming External Inter-Cell Handovers (SDCCH) (1800/1900900/850/810)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080441
CELL.INTERBSC.INCELL.HO.FAIL.TCH.900.900
H3429W:Failed Incoming External Inter-Cell Handovers (TCH) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080442
CELL.INTERBSC. INCELL.HO.FAIL.TCH.1800.1800
H3429X:Failed Incoming External Inter-Cell Handovers (TCH) (1800/1900-
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1800/1900)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
159/201
16/7/2015
Handover Featur e Parameter Description
1278080443
CELL.INTERBSC.INCELL.HO.FAIL.TCH.900.1800
H3429Y:Failed Incoming External Inter-Cell Handovers (TCH) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080444
CELL.INTERBSC.INCELL.HO.FAIL.TCH.1800.900
H3429Z:Failed Incoming External Inter-Cell Handovers (TCH) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080453
CELL.INTERBSC.INCELL.HO.FAIL.CONTENTS.INVALID
H342I:Failed Incoming BSC6910 External Inter-Cell Handovers (Invalid Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080454
CELL.INTERBSC.INCELL.HO.FAIL.CONG.SD
H3420A:Failed BSC6910 Incoming External Inter-Cell Handovers (No Channel Available) (SDCCH)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080455
CELL.INTERBSC.INCELL.HO.FAIL.CONG.TCH
H3429A:Failed BSC6910 Incoming External Inter-Cell Handovers (No Channel Available) (TCH)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080456
CELL.INTERBSC.INCELL.HO.FAIL.NO.CIC
H342E:Failed Incoming External Inter-Cell Handovers (CIC Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080457
CELL.INTERBSC.INCELL.HO.FAIL.CIC.AVAIL
H342F:Failed Incoming External Inter-Cell Handovers (CIC Allocated)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080458
CELL.INTERBSC. INCELL.HO.FAIL.APPLY.TRSL.FAIL
H342B: Failed Incoming External Inter-Cell Handovers (Terrestrial Resource Request Failed)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080459
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD
H342H:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080460
CELL.INTERBSC.INCELL.HO.FAIL.EXP.SD
H3420C:Failed Incoming External Inter-Cell Handovers (Timer Expired) (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080461
CELL.INTERBSC.INCELL.HO.FAIL.EXP.TCH.SIG
H3429Cb:Failed BSC6910 Incoming External Inter-Cell Handovers (Timer Expired) (TCH) (Signaling Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080462
CELL.INTERBSC. INCELL.HO.FAIL.EXP. TCH.TRAF
H3429Ca:Failed BSC6910 Incoming External Inter-Cell Handovers (Timer Expired) (TCH) (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080463
CELL.INTERBSC.INCELL.HO.DETECT.SD
H3440:Incoming External Inter-Cell Handover Detection Messages Received by BSC (SDCCH)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278080464
CELL.INTERBSC.INCELL.HO.DETECT.TCHF
H3447:Incoming External Inter-Cell Handover Detection Messages Received by BSC (TCHF)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080466
CELL.INTERBSC.INCELL.HO.REQ
CH340:Incoming External Inter-Cell Handover Requests
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080467
CELL.INTERBSC.INCELL.HO.SUCC
CH343:Successful Incoming External Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080468
CELL.INTERBSC.INCELL.HO.REQ.ACK
CH341:Incoming External Inter-Cell Handover Responses
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080469
CELL.INTERBSC.INCELL.HO.SUCC.RATE
TH343:Success Rate BSC6910 of Incoming External
GBFD110601
HUAWEI I Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
160/201
16/7/2015
Handover Feature Parameter Description 510501
Handover
1278080471
CELL.INTERBSC.INCELL.HO.DETECT
CH344:Incoming External Inter-Cell Handover Detection Messages Received by BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080472
CELL.INTERBSC.INCELL.HO.FAIL
CH342:Failed Incoming External Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080473
CELL.INTERBSC.INCELL.HO.FAIL.EXP
CH342C:Failed Incoming External Inter-Cell Handovers (Timer Expired)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080476
CELL.INTERBSC.INCELL.HO.REQ.BETTER.CELL
CH346:Incoming External Inter-Cell Handover Requests(Better Cell)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080477
CELL.INCELL.HO.REQ.TA
CH347:Incoming Inter- BSC6910 Cell Handover Requests (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080478
CELL.INTERBSC.INCELL.HO.FAIL.NO.IDLE.ABIS
H342L:Number of BSC6910 Incoming BSC Handover Failures (No Abis Resources Available)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080479
C ELL. IN TER BSC .I NC ELL. HO. FAI L. NO. SPEE CH .V ER
H 342J :Fail ed I nc omi ng BSC6910 External Inter-Cell Handovers (Requested Speech Version Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080482
CELL.INTERBSC.INTO.CELL.RD.HO.SUCC.RATE
RH303D:Success Rate of Incoming External Inter-Cell Radio Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080485
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.UM.MSG.FAIL
H342HA:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio Interface Message Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080486
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.UM.FAIL
H342HB:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(Radio interface failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080487
CELL.INTERBSC. INCELL.HO.FAIL.MSC.CLR.CMD.OM
H342HC:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(O and M intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080488
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.EQP.FAIL
H342HD:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Equipment failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080489
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.PREEMPTION
H342HE:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Preemption)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080490
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.INVAILD.MSG
H342HF:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC)(Invalid message contents)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080491
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.PROTOCOL.ERR
H342HG:Failed Incoming External Inter-Cell Handovers (Clear Commands Sent By MSC) (Protocol Error between BSS and MSC)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278080492
CELL.INTERBSC.INCELL.HO.FAIL.MSC.CLR.CMD.OTHER.FAIL
H342HH:Failed Incoming External Inter-Cell Handovers (Clear Commands
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Sent By MSC)(Other)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
161/201
16/7/2015
Handover Feature Parameter Description
1278081417
CELL.INTERBSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.900
H3300W:Outgoing External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081418
CELL.INTERBSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.1800
H3300X:Outgoing BSC6910 External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081419
CELL.INTERBSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.900.1800
H3300Y:Outgoing External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081420
CELL.INTERBSC.OUTCELL.HO.REQ.SD.NOT.INCLUDE.DR.1800.900
H3300Z:Outgoing External Inter-Cell Handover Requests (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081421
CELL.INTERBSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.900
H3310W:Outgoing External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081422
CELL.INTERBSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.1800
H3310X:Outgoing BSC6910 External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081423
CELL.INTERBSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.900.1800
H3310Y:Outgoing External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081424
CELL.INTERBSC.OUTCELL.HO.CMD.SD.NOT.INCLUDE.DR.1800.900
H3310Z:Outgoing External Inter-Cell Handover Commands (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081425
CELL.INTERBSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.900
H3317W:Outgoing External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081426
CELL.INTERBSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.1800
H3317X:Outgoing BSC6910 External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081427
CELL.INTERBSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.900.1800
H3317Y:Outgoing External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081428
CELL.INTERBSC.OUTCELL.HO.CMD.TCHF.NOT.INCLUDE.DR.1800.900
H3317Z:Outgoing External Inter-Cell Handover Commands (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081433
CELL.INTERBSC.OUTCELL.HO.CMD.DR.900.900
H3311W:Outgoing External Inter-Cell Handover Commands (Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081434
CELL.INTERBSC. OUTCELL.HO.CMD. DR. 1800.1800
H3311X:Out going
BSC6910
GBFD-
HUAWEI I
110601
Handover
External Inter-Cell
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
162/201
16/7/2015
Handover Feature Parameter Description (Directed Retry) (1800/1900-1800/1900)
510501 GBFD110607
Handover Direct Retry
1278081435
CELL.INTERBSC. OUTCELL.HO.CMD. DR. 900.1800
H3311Y:Out going External Inter-Cell Handover Commands (Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081436
CELL.INTERBSC. OUTCELL.HO.CMD. DR. 1800.900
H3311Z:Outgoing External Inter-Cell Handover Commands (Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081437
CELL.INTERBSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.900
H3320W:Failed Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081438
CELL.INTERBSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.1800
H3320X:Failed BSC6910 Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081439
CELL.INTERBSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.900.1800
H3320Y:Failed Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081440
CELL.INTERBSC.OUTCELL.HO.FAIL.SD.NOT.INCLUDE.DR.1800.900
H3320Z:Failed Outgoing External Inter-Cell Handovers (SDCCH) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081441
CELL.INTERBSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.900
H3327W:Failed Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081442
CELL.INTERBSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.1800
H3327X:Failed BSC6910 Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081443
CELL.INTERBSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.900.1800
H3327Y:Failed Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081444
CELL.INTERBSC.OUTCELL.HO.FAIL.TCHF.NOT.INCLUDE.DR.1800.900
H3327Z:Failed Outgoing External Inter-Cell Handovers (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081449
CELL.INTERBSC.OUTCELL.HO.FAIL.DR.900.900
H3321W:Failed Outgoing External Inter-Cell Handovers (Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081450
CELL.INTERBSC. OUTCELL.HO.FAIL.DR.1800.1800
H3321X:Failed BSC6910 Outgoing External Inter-Cell Handovers (Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081451
CELL.INTERBSC.OUTCELL.HO.FAIL.DR.900.1800
H3321Y:Failed Outgoing External Inter-Cell Handovers (Directed Retry) (900/850/8101800/1900)
GBFD110601 GBFD510501 GBFD-
HUAWEI I Handover HUAWEI II Handover Direct Retry
BSC6910
110607
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
163/201
16/7/2015
Handover Feature Parameter Description
1278081452
CELL.INTERBSC.OUTCELL.HO.FAIL.DR.1800.900
H3321Z:Failed Outgoing External Inter-Cell Handovers (Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081453
CELL.INTERBSC.OUTCELL.HO.REQ.UL.QLTY
H330A:Outgoing External Inter-Cell Handover Requests (Uplink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081454
CELL.INTERBSC.OUTCELL.HO.REQ.DL.QLTY
H330B:Outgoing External Inter-Cell Handover Requests (Downlink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081455
CELL.INTERBSC.OUTCELL.HO.REQ.UL.RXL
H330C:Outgoing External Inter-Cell Handover Requests (Uplink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081456
CELL.INTERBSC.OUTCELL.HO.REQ.DL.RXL
H330D:Outgoing External Inter-Cell Handover Requests (Downlink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081457
CELL.INTERBSC.OUTCELL.HO.REQ.TA
H330E:Outgoing External Inter-Cell Handover Requests (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081458
CELL.INTERBSC. OUTCELL.HO.REQ.BETTER.CELL
H330F:Outgoing External Inter-Cell Handover Requests (Better Cell)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081459
CELL.INTERBSC.OUTCELL.HO.REQ.LOAD
H330G:Outgoing External Inter-Cell Handover Requests (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081460
C ELL. IN TER BSC .OU TC ELL. HO. REQ. RAPI D. LEV. DR OP
H 330H :Out going External Inter-Cell Handover Requests (Rapid Level Drop)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081461
CELL.INTERBSC.OUTCELL.HO.REQ.MSC.INTERVENTION
H330I:Outgoing External Inter-Cell Handover Requests (MSC Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081462
C ELL. IN TER BSC .OU TC ELL. HO. REQ. OM. IN TER VEN TI ON
H 330J :Out going External Inter-Cell Handover Requests (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081464
CELL.INTERBSC.OUTCELL.HO.REQ.OTHER
H330L:Outgoing External Inter-Cell Handover Requests (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081465
CELL.INTERBSC.OUTCELL.HO.CMD.UL.QLTY
H331A:Outgoing External Inter-Cell Handover Commands (Uplink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081466
CELL.INTERBSC.OUTCELL.HO.CMD.DL.QLTY
H331B:Outgoing External Inter-Cell Handover Commands (Downlink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081467
CELL.INTERBSC.OUTCELL.HO.CMD.UL.RXL
H331C:Outgoing External Inter-Cell Handover Commands (Uplink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081468
CELL.INTERBSC.OUTCELL.HO.CMD.DL.RXL
H331D:Outgoing External Inter-Cell Handover Commands (Downlink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081469
CELL.INTERBSC.OUTCELL.HO.CMD.TA
H331E:Outgoing External Inter-Cell Handover Commands (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081470
CELL.INTERBSC. OUTCELL.HO.CMD. BETTER. CELL
H331F:Outgoing External Inter-Cell Handover Commands (Better Cell)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081471
CELL.INTERBSC.OUTCELL.HO.CMD.LOAD
H331G:Outgoing External Inter-Cell Handover Commands (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081472
C ELL. IN TER BSC .OU TC ELL. HO. CMD .RA PI D. LE V. DR OP
H 331H :Out going External Inter-Cell Handover Commands
BSC6910
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
164/201
16/7/2015
Handover Feature Parameter Description
1278081473
CELL.INTERBSC.OUTCELL.HO.CMD.MSC.INTERVENTION
H331I:Outgoing External Inter-Cell Handover Commands (MSC Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081474
CELL.INTERBSC.OUTCELL.HO.CMD.OM.INTERVENTION
H331J:Outgoing External Inter-Cell Handover Commands (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081476
CELL.INTERBSC.OUTCELL.HO.CMD.OTHER
H331L:Outgoing External Inter-Cell Handover Commands (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081477
CELL.INTERBSC.OUTCELL.HO.FAIL.UL.QLTY
H3322A:Failed Outgoing External Inter-Cell Handovers (Uplink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081478
CELL.INTERBSC.OUTCELL.HO.FAIL.DL.QLTY
H3322B:Failed Outgoing External Inter-Cell Handovers (Downlink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081479
CELL.INTERBSC.OUTCELL.HO.FAIL.UL.RXL
H3322C:Failed Outgoing External Inter-Cell Handovers (Uplink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081480
CELL.INTERBSC.OUTCELL.HO.FAIL.DL.RXL
H3322D:Failed Outgoing External Inter-Cell Handovers (Downlink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081481
CELL.INTERBSC.OUTCELL.HO.FAIL.TA
H3322E:Failed Outgoing External Inter-Cell Handovers (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081482
CELL.INTERBSC. OUTCELL.HO.FAIL.BETTER.CELL
H3322F:Failed Outgoing External Inter-Cell Handovers (Better Cell)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081483
CELL.INTERBSC.OUTCELL.HO.FAIL.LOAD
H3322G:Failed Outgoing External Inter-Cell Handovers (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081484
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. RAPI D. LEV. DR OP
H 3322H :Failed Outgoing External Inter-Cell Handovers (Rapid Level Drop)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081485
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.INTERVENTION
H3322I:Failed Outgoing External Inter-Cell Handovers (MSC Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081486
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. OM. IN TER VE NTI ON
H 3322J :Fai led Outgoing External Inter-Cell Handovers (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081488
CELL.INTERBSC.OUTCELL.HO.FAIL.OTHER
H3322L:Failed Outgoing External Inter-Cell Handovers (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081489
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.OM.INTERVENTION
H332Ka:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081490
CELL.INTERBSC. OUTCELL.HO.REQ.REJ .EQUIP.FAI L
H332Kb:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Equipment Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081491
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .N O. RAD IO. RES
H 332Kc :Fail ed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (No Radio Resource Available)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081492
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.REQ.NO.TER.RES
H332Kd:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Requested Terrestrial Resource Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081493
CELL.INTERBSC. OUTCELL.HO.REQ.REJ .BSS.NOT.EQUI P
H332Ke:Failed
BSC6910
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
165/201
16/7/2015
Handover Feature Parameter Description Inter-Cell Handovers (Handover Request Rejected) (BSS not Equipped)
GBFD510501
HUAWEI II Handover
1278081494
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .I NVALI D. CELL
H 332Kf :Failed BSC6910 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Invalid Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081495
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.REQ.TRANS.NO.ADAPT
H332Kg:Failed BSC6910 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Requested Transcoding/Rate Adaption Unavailable)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081496
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.CIRCUIT.POOL.MISMATCH
H332Kh:Failed BSC6910 Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Circuit Pool Mismatch)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081497
CELL.INTERBSC. OUTCELL.HO.REQ.REJ .REQ.NO.SV
H332Ki:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Requested Speech Version Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081498
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.CIPH.ALG.NOT.SUPPORT
H332Kj:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Ciphering Algorithm not Supported)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081499
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.TER.CIR.ALLOC
H332Kk:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Terrestrial Circuit Already Allocated)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081500
C ELL. IN TER BSC .OU TC ELL. HO. REQ. REJ .I NVALI D. MS G
H 332Kl :Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Invalid Message)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081501
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.PROTOCOL.ERR
H332Km:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Protocol Error between BSS and MSC)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081502
CELL.INTERBSC.OUTCELL.HO.REQ.REJ.OTHER
H332Kn:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected) (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081503 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN. SUCC.MS.R PT.ABNORM.REL.UNS H332Da:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Unspecified)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081504 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.CH N H332Db:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Channel Unacceptable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081505
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN .SUCC.MS. RPT.ABNORM.REL.EXP H332Dc:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release Timer Expired)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081506
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.ABN.REL.NO.ACT
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
H332Dd:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Abnormal Release
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
166/201
16/7/2015
Handover Feature Parameter Description Radio Path)
1278081507
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PREEMPT
H332De:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Preemptive Release)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081508
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.HO.TA
H332Df:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Handover Failed Timing Advance out of Range)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081509
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CH.MODE
H332Dg:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Channel Mode Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081510
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.FREQ
H332Dh:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Frequency Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081511
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CALL.CLR
H332Di:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Call Already Cleared)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081512
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.SEMANT
H332Dj:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Semantically Incorrect Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081513
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.INVALID.MAN
H332Dk:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Invalid Mandatory Information)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081514 CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN. SUCC.MS.R PT.MSG.TYPE.NEXIST H332Dl:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Non-Existent or Not Implemented)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081515
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.MSG.TYPE.NC
H332Dm:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Message Type Not Compatible with Protocol State)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081516
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.CONDIT
H332Dn:Failed BSC6910 Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Conditional IE Error)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081517
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.NO.CA
H332Do:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (No Cell Allocation Available)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081518
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.PROTOCL
H332Dp:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Protocol Error Unspecified)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081519
CELL.INTERBSC.OUTCELL.HO.FAIL.RECONN.SUCC.MS.RPT.OTHER
H332Dq:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels) (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081520
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.RADIO.INTF.MSG.FAIL
H332Ha:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
167/201
16/7/2015
Handover Feature Parameter Description Failure)
1278081521
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.RADIO.INTF.FAIL
H332Hb:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Radio Interface Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081522
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.OM.INTERVENTION
H332Hc:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081523
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.EQUIP.FAIL
H332Hd:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Equipment Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081524
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.PREEMPTION
H332He:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Preemption)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081525
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.INVALID.MSG
H332Hf:Failed BSC6910 Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Invalid Message)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081526
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.PROTOCOL.ERR
H332Hg:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Protocol Error between BSS and MSC)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081527
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. MSC .C LR .OTH ER
H 332H h: Failed BSC6910 Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC) (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081528
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR.A.INTF.FAIL
H332G:Failed Outgoing External Inter-Cell Handovers (A Interface Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081529
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.SD.NOT.INCLUDE.DR
H3320L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (SDCCH) (Excluding Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081530
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. T7. EXP .TC HF. SI G
H 3327Lb: Fail ed Outgoing External Inter-Cell Handovers (T7 Expiry) (TCHF) (Signaling Channel)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081532
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.TCHF.TRAF.CH
H3327La:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (TCHF) (Traffic Channel)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081534
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP.DR
H3321L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry) (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081535
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.SD.NOT.INCLUDE.DR
H3320C:Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (SDCCH) (Excluding Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110608
HUAWEI I Handover HUAWEI II Handover SDCCH Handover
1278081536
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. T8. EXP .TC HF. SI G
H 3327C b: Fai led Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF) (Signaling Channel)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081538
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.TCHF.TRAF.CH
H3327Ca:Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (TCHF)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
(Traffic Channel)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
168/201
16/7/2015
Handover Feature Parameter Description
1278081540
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP.DR
H3321C:Failed Outgoing External Inter-Cell Handovers (T8 Expiry) (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081541
CELL.INTERBSC.OUTCELL.HO.REQ.DIFFERENT.SIG.POINT
H3303:Outgoing External Inter-Cell Handover Requests (Different Signaling Points)
BSC6910
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081542
CELL.INTERBSC.OUTCELL.HO.CMD.DIFFERENT.SIG.POINT
H3313:Outgoing External Inter-Cell Handover Commands (Different Signaling Points)
BSC6910
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081543
CELL.INTERBSC.OUTCELL.HO.FAIL.DIFFERENT.SIG.POINT
H3323:Failed Outgoing BSC6910 External Inter-Cell Handovers (Different Signaling Points)
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278081544
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.900.900
H3307W:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081545
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.1800.1800
H3307X:Outgoing BSC6910 External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081546
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.900.1800
H3307Y:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081547
CELL.INTERBSC.OUTCELL.HO.REQ.TCHF.NOT.INCLUDEDR.1800.900
H3307Z:Outgoing External Inter-Cell Handover Requests (TCHF) (Excluding Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081552
CELL.INTERBSC.OUTCELL.HO.REQ.DR.900.900
H3301W:Outgoing External Inter-Cell Handover Requests (Directed Retry) (900/850/810900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081553
CELL.INTERBSC. OUTCELL.HO.REQ.DR.1800.1800
H3301X:Out going BSC6910 External Inter-Cell Handover Requests (Directed Retry) (1800/1900-1800/1900)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081554
CELL.INTERBSC. OUTCELL.HO.REQ.DR.900.1800
H3301Y:Out going External Inter-Cell Handover Requests (Directed Retry) (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081555
CELL.INTERBSC. OUTCELL.HO.REQ.DR.1800.900
H3301Z:Outgoing External Inter-Cell Handover Requests (Directed Retry) (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278081556
CELL.INTERBSC.OUTCELL.HO.REQ
CH330:Outgoing External Inter-Cell Handover Requests
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081557
CELL.INTERBSC.OUTCELL.HO.SUCC
CH333:Successful Outgoing External Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081558
CELL.INTERBSC.OUTCELL.HO.CMD
CH331:Outgoing External Inter-Cell Handover Commands
BSC6910
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
169/201
16/7/2015
Handover Feature Parameter Description
1278081559
CELL.INTERBSC.OUTCELL.HO.FAIL
CH332:Failed Outgoing External Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081560
CELL.INTERBSC.OUTCELL.HO.SUCC.RATE
TH333:Success Rate BSC6910 of Outgoing External Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081561
CELL.INTERBSC.OUTCELL.HO.FAIL.REQ.REJ
CH332K:Failed Outgoing External Inter-Cell Handovers (Handover Request Rejected)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081562
CELL.INTERBSC. OUTCELL.HO.FAIL.RECONN.SUCC
CH332D:Failed Outgoing External Inter-Cell Handovers (Reconnection to Old Channels)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081563
CELL.INTERBSC.OUTCELL.HO.FAIL.MSC.CLR
CH332H:Failed Outgoing External Inter-Cell Handovers (Clear Commands Sent By MSC)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081564
CELL.INTERBSC.OUTCELL.HO.FAIL.T7.EXP
CH332L:Failed Outgoing External Inter-Cell Handovers (T7 Expiry)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081565
CELL.INTERBSC.OUTCELL.HO.FAIL.T8.EXP
CH332C:Failed Outgoing External Inter-Cell Handovers (T8 Expired)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081576
CELL.INTERBSC.OUTCELL.CLEAR.CMD.BEFORE.HO.CMD
H335A:Outgoing External Inter-Cell Handover Clear Cmd Times (Before Handover Response)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081577
CELL.INTERBSC.OUTCELL.CLEAR.CMD.AFTER.HO.CMD
H335B:Outgoing BSC6910 External Inter-Cell Handover Clear Cmd Times (After Handover Response)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278081578
CELL.INTERBSC.OUT.CELL.RD.HO.SUCC.RATE
RH303E:Success Rate of External Outgoing Cell Radio Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084417
CELLCELL.INCELL.HO.REQ
H380:Incoming InterCell Handover Requests
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084418
CELLCELL.INCELL.HO.FAIL.CONG
H382A:Failed Incoming Inter-Cell Handovers (Congestion)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084419
CELLCELL.INCELL.HO.FAIL.OTHER
H382M:Failed Incoming Inter-Cell Handovers (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084420
CELLCELL.INCELL.HO.SUCC.RATE
RH383:Success Rate BSC6910 of Incoming Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084421
CELLCELL.INCELL.HO.FAIL
H382:Failed Incoming BSC6910 Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278084422
CELLCELL.INCELL.HO.SUCC
H383:Successful Incoming Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085417
CELLCELL.OUTCELL.CMD.UL.QLTY
H371A:Outgoing Inter- BSC6910 Cell Handover Commands (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085418
CELLCELL.OUTCELL.CMD.DL.QLTY
H371B:Outgoing Inter- BSC6910 Cell Handover Commands (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085419
CELLCELL.OUTCELL.CMD.UL.RXL
H371C:Outgoing Inter- BSC6910 Cell Handover Commands (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085420
CELLCELL.OUTCELL.CMD.DL.RXL
H371D:Outgoing Inter- BSC6910
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
170/201
16/7/2015
Handover Feature Parameter Description Commands (Downlink Strength)
GBFD510501
HUAWEI II Handover
1278085421
CELLCELL.OUTCELL.CMD.TA
H371E:Outgoing Inter- BSC6910 Cell Handover Commands (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085422
CELLCELL.OUTCELL.CMD.BETTER.CELL
H371F:Outgoing Inter- BSC6910 Cell Handover Commands (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085423
CELLCELL.OUTCELL.CMD.LOAD
H371G:Outgoing Inter- BSC6910 Cell Handover Commands (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085424
CELLCELL.OUTCELL.CMD.RAPID.LEV.DROP
H371H:Outgoing Inter- BSC6910 Cell Handover Commands (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085425
CELLCELL.OUTCELL.CMD.MSC.INTERVENTION
H371I: Outgoing Inter- BSC6910 Cell Handover Commands (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085426
CELLCELL.OUTCELL.CMD.OM.INTERVENTION
H371J:Outgoing Inter- BSC6910 Cell Handover Commands (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085428
CELLCELL.OUTCELL.CMD.OTHER
H371L:Outgoing Inter- BSC6910 Cell Handover Commands (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085429
CELLCELL.OUTCELL.FAIL.UL.QLTY
H372A:Failed Outgoing Inter-Cell Handovers (Uplink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085430
CELLCELL.OUTCELL.FAIL.DL.QLTY
H372B:Failed Outgoing Inter-Cell Handovers (Downlink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085431
CELLCELL.OUTCELL.FAIL.UL.RXL
H372C:Failed Outgoing Inter-Cell Handovers (Uplink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085432
CELLCELL.OUTCELL.FAIL.DL.RXL
H372D:Failed Outgoing Inter-Cell Handovers (Downlink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085433
CELLCELL.OUTCELL.FAIL.TA
H372E:Failed Outgoing Inter-Cell Handovers (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085434
CELLCELL.OUTCELL.FAIL.BETTER.CELL
H372F:Failed Outgoing BSC6910 Inter-Cell Handovers (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085435
CELLCELL.OUTCELL.FAIL.LOAD
H372G:Failed Outgoing Inter-Cell Handovers (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085436
CELLCELL.OUTCELL.FAIL.RAPID.LEV.DROP
H372H:Failed Outgoing Inter-Cell Handovers (Rapid Level Drop)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085437
CELLCELL.OUTCELL.FAIL. MSC.I NTERVENTION
H372I: Failed Outgoing BSC6910 Inter-Cell Handovers (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085438
CELLCELL.OUTCELL.FAIL.OM.INTERVENTION
H372J:Failed Outgoing BSC6910 Inter-Cell Handovers (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085440
CELLCELL.OUTCELL.FAIL.OTHER
H372L:Failed Outgoing BSC6910 Inter-Cell Handovers (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085441
CELLCELL.OUTCELL.HO.SUCC.RATE
RH373:Outgoing Inter- BSC6910 Cell Handover Success Rate
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085442
CELLCELL.OUTCELL.HO.CMD
H371:Outgoing InterCell Handover
GBFD110601
HUAWEI I Handover
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
171/201
16/7/2015
Handover Feature Parameter Description 510501
Handover
1278085443
CELLCELL.OUTCELL.HO.FAIL
H372:Failed Outgoing BSC6910 Inter-Cell Handovers
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085444
CELLCELL.OUTCELL.HO.SUCC
H373:Successful Outgoing Inter-Cell Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085451
CELLCELL.OUTCELL.HO.REQ
H370c:Outgoing Inter- BSC6910 Cell Handover Requests
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085452
CELLCELL.OUT.CELL.FAIL.TIMES.DR
H372P:Failed Outgoing Inter-Cell Handovers (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085453
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. UL. QUA LI TY
H 374A: Out goi ng I nt er- BSC6910 Cell Handover Requests (Uplink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085454
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. DL. QUA LI TY
H 374B: Out goi ng I nt er- BSC6910 Cell Handover Requests (Downlink Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085455
CELLCELL.OUT.CELL.HO.REQ.TIMES.UL.RXL
H374C:Outgoing Inter- BSC6910 Cell Handover Requests (Uplink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085456
CELLCELL.OUT.CELL.HO.REQ.TIMES.DL.RXL
H374D:Outgoing Inter- BSC6910 Cell Handover Requests (Downlink Strength)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085457
CELLCELL.OUT.CELL.HO.REQ.TIMES.TA
H374E:Outgoing Inter- BSC6910 Cell Handover Requests (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085458
CELLCELL.OUT.CELL.HO.REQ.TIMES.LOAD
H374F:Outgoing Inter- BSC6910 Cell Handover Requests (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085459
CELLCELL.OUT.CELL.HO.REQ.TIMES.MSC.INTERVENTION
H374G:Outgoing Inter- BSC6910 Cell Handover Requests (MSC Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085460
CELLCELL.OUT.CELL.HO.REQ.TIMES.OM.INTERVENTION
H374H:Outgoing Inter- BSC6910 Cell Handover Requests (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085461
C ELLC ELL. OU T. CELL. HO. REQ. TI MES. BETTER .C ELL
H 374I :Out goi ng I nt er- BSC6910 Cell Handover Requests (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085462
CELLCELL.OUT.CELL.HO.REQ.TIMES.RAPID.LEVEL.DROP
H374J:Outgoing Inter- BSC6910 Cell Handover Requests (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085463
CELLCELL.OUT.CELL.HO.REQ.TIMES.DR
H374K:Outgoing Inter- BSC6910 Cell Handover Requests (Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085464
CELLCELL.OUT.CELL.HO.REQ.TIMES.OTHER
H374L:Outgoing Inter- BSC6910 Cell Handover Requests (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085465
CELLCELL.OUT.CELL.HO.SUCC.TIMES.UL. QUALITY
H373A: Suc cess ful Outgoing Inter-Cell Handovers (Uplink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085466
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DL. QUALITY
H373B: Suc cess ful Outgoing Inter-Cell Handovers (Downlink Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085467
CELLCELL.OUT.CELL.HO.SUCC.TIMES.UL.RXL
H373C:Successful Outgoing Inter-Cell Handovers (Uplink
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
Strength)
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
172/201
16/7/2015
Handover Feature Parameter Description
1278085468
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DL.RXL
H373D:Successful Outgoing Inter-Cell Handovers (Downlink Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085469
CELLCELL.OUT.CELL.HO.SUCC.TIMES.TA
H373E:Successful Outgoing Inter-Cell Handovers (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085470
CELLCELL.OUT.CELL.HO.SUCC.TIMES.LOAD
H373F:Successful Outgoing Inter-Cell Handovers (Load)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085471
CELLCELL.OUT.CELL.HO.SUCC.TIMES.MSC.INTERVENTION
H373G:Successful Outgoing Inter-Cell Handovers (MSC Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085472
CELLCELL.OUT.CELL.HO.SUCC.TIMES.OM.INTERVENTION
H373H:Successful Outgoing Inter-Cell Handovers (OM Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085473
C ELLC ELL. OU T. CELL. HO. SUC C. TI MES. BETTER .C ELL
H 373I :Suc ces sf ul Outgoing Inter-Cell Handovers (Better Cell)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085474
CELLCELL.OUT.CELL.HO.SUCC.TIMES.RAPID.LEVEL.DROP
H373J:Successful Outgoing Inter-Cell Handovers (Rapid Level Drop)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085475
CELLCELL.OUT.CELL.HO.SUCC.TIMES.DR
H373K:Successful Outgoing Inter-Cell Handovers (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278085476
CELLCELL.OUT.CELL.HO.SUCC.TIMES.OTHER
H373L:Successful Outgoing Inter-Cell Handovers (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085477
CELLCELL.OUT.CELL.HO.FAIL.RECONN.SUCC.TIMES
H375A:Outgoing Inter- BSC6910 Cell Handover Fail Reconn Success
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278085478
C ELLC ELL. OU T. CELL. HO. FAI L. REC ONN .FAI L. TI MES
H 375B: Out goi ng I nt er- BSC6910 Cell Handover Fail Reconn Fail
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278086434
CELL.HO.UL.LEV.AVG
AS330C:Mean Uplink BSC6910 Receiving Level during Handover Initiation
GBFD110601
HUAWEI I Handover
1278086436
CELL.HO.UL.QLTY.AVG
AS331C:Mean Uplink BSC6910 Receive Quality during Handover Initiation
GBFD110601
HUAWEI I Handover
1278086451
CELL.EDGE.HO.UL.LEV.AVG
S335:Mean Uplink BSC6910 Receiving Level during Edge Handover Initiation
GBFD110601
HUAWEI I Handover
1278086452
CELL.EDGE.HO.DL.LEV.AVG
S336:Mean Downlink BSC6910 Receiving Level during Edge Handover Initiation
GBFD110601
HUAWEI I Handover
1278087434
CELL.KPI.TCH.HO.REQ.TRAF
K3010B:TCH Seizure BSC6910 Requests in TCH Handovers (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087435
CELL.KPI.TCH.HO.CONGEST.TRAF
K3011B:Failed TCH Seizures in TCH Handovers due to Busy TCH (Traffic Channel)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087436
CELL.KPI.TCH.HO.SUCC.TRAF
K3013B:Successful BSC6910 TCH Seizures in TCH handovers (Traffic Channel)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087441
CELL.KPI.DUBAND.HO.REQ
K3170:Dual-Band Handover Requests
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278087442
CELL.KPI.DUBAND.HO.SUCC
K3173:Successful Dual-Band Handovers
BSC6910
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
510501
Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
173/201
16/7/2015
Handover Feature Parameter Description
1278087449
CELL.KPI.DUBAND.HO.FAIL
K3173F:Failed DualBand Handovers
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278269453
CELL.DL.MR.NUM
S373:Number of Downlink MRs
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269457
CELL.MR.WEAK.COVERAGE.RATE
CS3031A:Rate of BSC6910 MRs (Weak Coverage)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269458
CELL.MR.OVER.COVERAGE.RATE
CS3031B:Rate of MRs (Excessive Coverage)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278269459
CELL.SCELL.MR.NUM
S3013:MRs of Serving BSC6910 Cells
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271427
CELL.DL.SIG.STRENGTH.AVR
AS325B:Mean Strength of Downlink Signals
BSC6910
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271428
CELL.UL.SIG.STRENGTH.AVR
AS325A:Mean Strength of Uplink Signals
BSC6910
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271431
CELL.DL.SIG.QLTY.AVR
AS326B:Mean Quality BSC6910 of Downlink Signals
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271432
CELL.UL.SIG.QLTY.AVR
AS326A:Mean Quality BSC6910 of Uplink Signals
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271435
CELL.TIME.WHEN.MAX.DOWN.PWR.AVR
RS327B:Rate of Duration (Maximum Downlink Transmit Power) (%)
BSC6910
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271436
CELL.TIME.WHEN.MAX.UP.PWR.AVR
RS327A:Rate of Maximum Uplink Power Duration (%)
BSC6910
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271440
CELL.MAX.MS.BTS.DIST
S3281:Maximum BSC6910 Distance Between MS and BTS
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278271442
CELL.MS.BTS.DIST.AVR
AS3280:Mean BSC6910 Distance Between MS and BTS
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273417
TRX.FR.UP.LEV.0.RX.QLTY.0
S4100A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273418
TRX.FR.UP.LEV.0.RX.QLTY.1
S4101A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
174/201
16/7/2015
Handover Feature Parameter Description
1278273419
TRX.FR.UP.LEV.0.RX.QLTY.2
S4102A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273420
TRX.FR.UP.LEV.0.RX.QLTY.3
S4103A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273421
TRX.FR.UP.LEV.0.RX.QLTY.4
S4104A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273422
TRX.FR.UP.LEV.0.RX.QLTY.5
S4105A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273423
TRX.FR.UP.LEV.0.RX.QLTY.6
S4106A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273424
TRX.FR.UP.LEV.0.RX.QLTY.7
S4107A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 0 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273425
TRX.FR.UP.LEV.1.RX.QLTY.0
S4110A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273426
TRX.FR.UP.LEV.1.RX.QLTY.1
S4111A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273427
TRX.FR.UP.LEV.1.RX.QLTY.2
S4112A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273428
TRX.FR.UP.LEV.1.RX.QLTY.3
S4113A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273429
TRX.FR.UP.LEV.1.RX.QLTY.4
S4114A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273430
TRX.FR.UP.LEV.1.RX.QLTY.5
S4115A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273431
TRX.FR.UP.LEV.1.RX.QLTY.6
S4116A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273432
TRX.FR.UP.LEV.1.RX.QLTY.7
S4117A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 1 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273433
TRX.FR.UP.LEV.2.RX.QLTY.0
S4120A:Number of MRs on Uplink TCHF
GBFD 110801
Processing of Measurement
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
175/201
16/7/2015
Handover Feature Parameter Description and Receive Quality Rank 0)
110802
Pre-processing of Measurement Report
1278273434
TRX.FR.UP.LEV.2.RX.QLTY.1
S4121A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273435
TRX.FR.UP.LEV.2.RX.QLTY.2
S4122A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273436
TRX.FR.UP.LEV.2.RX.QLTY.3
S4123A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273437
TRX.FR.UP.LEV.2.RX.QLTY.4
S4124A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273438
TRX.FR.UP.LEV.2.RX.QLTY.5
S4125A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273439
TRX.FR.UP.LEV.2.RX.QLTY.6
S4126A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273440
TRX.FR.UP.LEV.2.RX.QLTY.7
S4127A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 2 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273441
TRX.FR.UP.LEV.3.RX.QLTY.0
S4130A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273442
TRX.FR.UP.LEV.3.RX.QLTY.1
S4131A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273443
TRX.FR.UP.LEV.3.RX.QLTY.2
S4132A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273444
TRX.FR.UP.LEV.3.RX.QLTY.3
S4133A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273445
TRX.FR.UP.LEV.3.RX.QLTY.4
S4134A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273446
TRX.FR.UP.LEV.3.RX.QLTY.5
S4135A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273447
TRX.FR.UP.LEV.3.RX.QLTY.6
S4136A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
176/201
16/7/2015
Handover Feature Parameter Description
1278273448
TRX.FR.UP.LEV.3.RX.QLTY.7
S4137A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 3 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273449
TRX.FR.UP.LEV.4.RX.QLTY.0
S4140A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273450
TRX.FR.UP.LEV.4.RX.QLTY.1
S4141A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273451
TRX.FR.UP.LEV.4.RX.QLTY.2
S4142A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273452
TRX.FR.UP.LEV.4.RX.QLTY.3
S4143A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273453
TRX.FR.UP.LEV.4.RX.QLTY.4
S4144A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273454
TRX.FR.UP.LEV.4.RX.QLTY.5
S4145A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273455
TRX.FR.UP.LEV.4.RX.QLTY.6
S4146A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273456
TRX.FR.UP.LEV.4.RX.QLTY.7
S4147A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 4 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273457
TRX.FR.UP.LEV.5.RX.QLTY.0
S4150A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273458
TRX.FR.UP.LEV.5.RX.QLTY.1
S4151A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273459
TRX.FR.UP.LEV.5.RX.QLTY.2
S4152A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273460
TRX.FR.UP.LEV.5.RX.QLTY.3
S4153A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273461
TRX.FR.UP.LEV.5.RX.QLTY.4
S4154A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273462
TRX.FR.UP.LEV.5.RX.QLTY.5
S4155A:Number of MRs on Uplink TCHF
GBFD 110801
Processing of Measurement
GBFD-
Report
(Receive Level Rank 5
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
177/201
16/7/2015
Handover Feature Parameter Description Rank 5)
of Measurement Report
1278273463
TRX.FR.UP.LEV.5.RX.QLTY.6
S4156A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273464
TRX.FR.UP.LEV.5.RX.QLTY.7
S4157A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 5 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273465
TRX.FR.UP.LEV.6.RX.QLTY.0
S4160A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273466
TRX.FR.UP.LEV.6.RX.QLTY.1
S4161A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273467
TRX.FR.UP.LEV.6.RX.QLTY.2
S4162A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273468
TRX.FR.UP.LEV.6.RX.QLTY.3
S4163A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273469
TRX.FR.UP.LEV.6.RX.QLTY.4
S4164A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273470
TRX.FR.UP.LEV.6.RX.QLTY.5
S4165A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273471
TRX.FR.UP.LEV.6.RX.QLTY.6
S4166A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273472
TRX.FR.UP.LEV.6.RX.QLTY.7
S4167A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 6 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273473
TRX.FR.UP.LEV.7.RX.QLTY.0
S4170A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273474
TRX.FR.UP.LEV.7.RX.QLTY.1
S4171A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273475
TRX.FR.UP.LEV.7.RX.QLTY.2
S4172A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273476
TRX.FR.UP.LEV.7.RX.QLTY.3
S4173A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273477
TRX.FR.UP.LEV.7.RX.QLTY.4
S4174A:Number of
GBFD-
Processing of
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
178/201
16/7/2015
Handover Feature Parameter Description (Receive Level Rank 7 and Receive Quality Rank 4)
GBFD110802
Report Pre-processing of Measurement Report
1278273478
TRX.FR.UP.LEV.7.RX.QLTY.5
S4175A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273479
TRX.FR.UP.LEV.7.RX.QLTY.6
S4176A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273480
TRX.FR.UP.LEV.7.RX.QLTY.7
S4177A:Number of BSC6910 MRs on Uplink TCHF (Receive Level Rank 7 and Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273481
TRX.FR.DOWN.LEV.0.RX.QLTY.0
S4100B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273482
TRX.FR.DOWN.LEV.0.RX.QLTY.1
S4101B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273483
TRX.FR.DOWN.LEV.0.RX.QLTY.2
S4102B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273484
TRX.FR.DOWN.LEV.0.RX.QLTY.3
S4103B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273485
TRX.FR.DOWN.LEV.0.RX.QLTY.4
S4104B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273486
TRX.FR.DOWN.LEV.0.RX.QLTY.5
S4105B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273487
TRX.FR.DOWN.LEV.0.RX.QLTY.6
S4106B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273488
TRX.FR.DOWN.LEV.0.RX.QLTY.7
S4107B:Number of MRs on Downlink TCHF (Receive Level Rank 0 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273489
TRX.FR.DOWN.LEV.1.RX.QLTY.0
S4110B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273490
TRX.FR.DOWN.LEV.1.RX.QLTY.1
S4111B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273491
TRX.FR.DOWN.LEV.1.RX.QLTY.2
S4112B:Number of MRs on Downlink TCHF (Receive Level
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report
Rank 1 and Receive
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
Pre-processing
179/201
16/7/2015
Handover Feature Parameter Description Report
1278273492
TRX.FR.DOWN.LEV.1.RX.QLTY.3
S4113B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273493
TRX.FR.DOWN.LEV.1.RX.QLTY.4
S4114B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273494
TRX.FR.DOWN.LEV.1.RX.QLTY.5
S4115B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273495
TRX.FR.DOWN.LEV.1.RX.QLTY.6
S4116B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273496
TRX.FR.DOWN.LEV.1.RX.QLTY.7
S4117B:Number of MRs on Downlink TCHF (Receive Level Rank 1 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273497
TRX.FR.DOWN.LEV.2.RX.QLTY.0
S4120B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273498
TRX.FR.DOWN.LEV.2.RX.QLTY.1
S4121B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273499
TRX.FR.DOWN.LEV.2.RX.QLTY.2
S4122B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273500
TRX.FR.DOWN.LEV.2.RX.QLTY.3
S4123B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273501
TRX.FR.DOWN.LEV.2.RX.QLTY.4
S4124B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273502
TRX.FR.DOWN.LEV.2.RX.QLTY.5
S4125B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273503
TRX.FR.DOWN.LEV.2.RX.QLTY.6
S4126B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273504
TRX.FR.DOWN.LEV.2.RX.QLTY.7
S4127B:Number of MRs on Downlink TCHF (Receive Level Rank 2 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273505
TRX.FR.DOWN.LEV.3.RX.QLTY.0
S4130B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273506
TRX.FR.DOWN.LEV.3.RX.QLTY.1
S4131B:Number of
BSC6910
GBFD-
Processing of
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
180/201
16/7/2015
Handover Feature Parameter Description TCHF (Receive Level Rank 3 and Receive Quality Rank 1)
GBFD110802
Report Pre-processing of Measurement Report
1278273507
TRX.FR.DOWN.LEV.3.RX.QLTY.2
S4132B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273508
TRX.FR.DOWN.LEV.3.RX.QLTY.3
S4133B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273509
TRX.FR.DOWN.LEV.3.RX.QLTY.4
S4134B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273510
TRX.FR.DOWN.LEV.3.RX.QLTY.5
S4135B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273511
TRX.FR.DOWN.LEV.3.RX.QLTY.6
S4136B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273512
TRX.FR.DOWN.LEV.3.RX.QLTY.7
S4137B:Number of MRs on Downlink TCHF (Receive Level Rank 3 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273513
TRX.FR.DOWN.LEV.4.RX.QLTY.0
S4140B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273514
TRX.FR.DOWN.LEV.4.RX.QLTY.1
S4141B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273515
TRX.FR.DOWN.LEV.4.RX.QLTY.2
S4142B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273516
TRX.FR.DOWN.LEV.4.RX.QLTY.3
S4143B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273517
TRX.FR.DOWN.LEV.4.RX.QLTY.4
S4144B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273518
TRX.FR.DOWN.LEV.4.RX.QLTY.5
S4145B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273519
TRX.FR.DOWN.LEV.4.RX.QLTY.6
S4146B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273520
TRX.FR.DOWN.LEV.4.RX.QLTY.7
S4147B:Number of MRs on Downlink TCHF (Receive Level Rank 4 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
181/201
16/7/2015
Handover Feature Parameter Description
1278273521
TRX.FR.DOWN.LEV.5.RX.QLTY.0
S4150B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273522
TRX.FR.DOWN.LEV.5.RX.QLTY.1
S4151B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273523
TRX.FR.DOWN.LEV.5.RX.QLTY.2
S4152B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273524
TRX.FR.DOWN.LEV.5.RX.QLTY.3
S4153B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273525
TRX.FR.DOWN.LEV.5.RX.QLTY.4
S4154B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273526
TRX.FR.DOWN.LEV.5.RX.QLTY.5
S4155B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273527
TRX.FR.DOWN.LEV.5.RX.QLTY.6
S4156B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273528
TRX.FR.DOWN.LEV.5.RX.QLTY.7
S4157B:Number of MRs on Downlink TCHF (Receive Level Rank 5 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273529
TRX.FR.DOWN.LEV.6.RX.QLTY.0
S4160B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273530
TRX.FR.DOWN.LEV.6.RX.QLTY.1
S4161B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273531
TRX.FR.DOWN.LEV.6.RX.QLTY.2
S4162B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273532
TRX.FR.DOWN.LEV.6.RX.QLTY.3
S4163B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273533
TRX.FR.DOWN.LEV.6.RX.QLTY.4
S4164B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273534
TRX.FR.DOWN.LEV.6.RX.QLTY.5
S4165B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273535
TRX.FR.DOWN.LEV.6.RX.QLTY.6
S4166B:Number of
BSC6910
GBFD-
Processing of
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
182/201
16/7/2015
Handover Feature Parameter Description TCHF (Receive Level Rank 6 and Receive Quality Rank 6)
GBFD110802
Report Pre-processing of Measurement Report
1278273536
TRX.FR.DOWN.LEV.6.RX.QLTY.7
S4167B:Number of MRs on Downlink TCHF (Receive Level Rank 6 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273537
TRX.FR.DOWN.LEV.7.RX.QLTY.0
S4170B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273538
TRX.FR.DOWN.LEV.7.RX.QLTY.1
S4171B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273539
TRX.FR.DOWN.LEV.7.RX.QLTY.2
S4172B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273540
TRX.FR.DOWN.LEV.7.RX.QLTY.3
S4173B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273541
TRX.FR.DOWN.LEV.7.RX.QLTY.4
S4174B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273542
TRX.FR.DOWN.LEV.7.RX.QLTY.5
S4175B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273543
TRX.FR.DOWN.LEV.7.RX.QLTY.6
S4176B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278273544
TRX.FR.DOWN.LEV.7.RX.QLTY.7
S4177B:Number of MRs on Downlink TCHF (Receive Level Rank 7 and Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275417
TRX.FR.UP.RX.QLTY.0.AVR
CS410A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275418
TRX.FR.UP.RX.QLTY.1.AVR
CS411A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275419
TRX.FR.UP.RX.QLTY.2.AVR
CS412A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275420
TRX.FR.UP.RX.QLTY.3.AVR
CS413A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275421
TRX.FR.UP.RX.QLTY.4.AVR
CS414A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 4)
GBFD 110801
Processing of Measurement Report Pre-processing
GBFD-
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
183/201
16/7/2015
Handover Feature Parameter Description Report
1278275422
TRX.FR.UP.RX.QLTY.5.AVR
CS415A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275423
TRX.FR.UP.RX.QLTY.6.AVR
CS416A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275424
TRX.FR.UP.RX.QLTY.7.AVR
CS417A:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275425
TRX.FR.DOWN.RX.QLTY.0.AVR
CS410B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 0)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275426
TRX.FR.DOWN.RX.QLTY.1.AVR
CS411B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 1)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275427
TRX.FR.DOWN.RX.QLTY.2.AVR
CS412B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 2)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275428
TRX.FR.DOWN.RX.QLTY.3.AVR
CS413B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 3)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275429
TRX.FR.DOWN.RX.QLTY.4.AVR
CS414B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 4)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275430
TRX.FR.DOWN.RX.QLTY.5.AVR
CS415B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 5)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275431
TRX.FR.DOWN.RX.QLTY.6.AVR
CS416B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 6)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278275432
TRX.FR.DOWN.RX.QLTY.7.AVR
CS417B:Number of MRs on Downlink TCHF (Mean Receive Quality Rank 7)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276417
TRX.BALANCE.LEV.1
S462A:Number of MRs (Uplink-andDownlink Balance Level = 1)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276418
TRX.BALANCE.LEV.2
S462B:Number of MRs (Uplink-andDownlink Balance Level = 2)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276419
TRX.BALANCE.LEV.3
S462C:Number of MRs (Uplink-andDownlink Balance Level = 3)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
184/201
16/7/2015
Handover Feature Parameter Description
1278276420
TRX.BALANCE.LEV.4
S462D:Number of MRs (Uplink-andDownlink Balance Level = 4)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276421
TRX.BALANCE.LEV.5
S462E:Number of MRs (Uplink-andDownlink Balance Level = 5)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276422
TRX.BALANCE.LEV.6
S462F:Number of MRs (Uplink-andDownlink Balance Level = 6)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276423
TRX.BALANCE.LEV.7
S462G:Number of MRs (Uplink-andDownlink Balance Level = 7)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276424
TRX.BALANCE.LEV.8
S462H:Number of MRs (Uplink-andDownlink Balance Level = 8)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276425
TRX.BALANCE.LEV.9
S462I:Number of MRs BSC6910 (Uplink-and-Downlink Balance Level = 9)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276426
TRX.BALANCE.LEV.10
S462J:Number of MRs BSC6910 (Uplink-and-Downlink Balance Level = 10)
GBFD110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278276427
TRX.BALANCE.LEV.11
S462K:Number of MRs (Uplink-andDownlink Balance Level = 11)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277417
TRX.MR.NUM.BY.TA.0
S4400A:Number of MRs (TA = 0)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277418
TRX.MR.NUM.BY.TA.1
S4401A:Number of MRs (TA = 1)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277419
TRX.MR.NUM.BY.TA.2
S4402A:Number of MRs (TA = 2)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277420
TRX.MR.NUM.BY.TA.3
S4403A:Number of MRs (TA = 3)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277421
TRX.MR.NUM.BY.TA.4
S4404A:Number of MRs (TA = 4)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277422
TRX.MR.NUM.BY.TA.5
S4405A:Number of MRs (TA = 5)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277423
TRX.MR.NUM.BY.TA.6
S4406A:Number of MRs (TA = 6)
BSC6910
GBFD- 110801
Processing of Measurement
GBFD-
Report
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
185/201
16/7/2015
Handover Feature Parameter Description of Measurement Report
1278277424
TRX.MR.NUM.BY.TA.7
S4407A:Number of MRs (TA = 7)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277425
TRX.MR.NUM.BY.TA.8
S4408A:Number of MRs (TA = 8)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277426
TRX.MR.NUM.BY.TA.9
S4409A:Number of MRs (TA = 9)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277427
TRX.MR.NUM.BY.TA.10
S4410A:Number of MRs (TA = 10)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277428
TRX.MR.NUM.BY.TA.11
S4411A:Number of MRs (TA = 11)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277429
TRX.MR.NUM.BY.TA.12
S4412A:Number of MRs (TA = 12)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277430
TRX.MR.NUM.BY.TA.13
S4413A:Number of MRs (TA = 13)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277431
TRX.MR.NUM.BY.TA.14
S4414A:Number of MRs (TA = 14)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277432
TRX.MR.NUM.BY.TA.15
S4415A:Number of MRs (TA = 15)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277433
TRX.MR.NUM.BY.TA.16
S4416A:Number of MRs (TA = 16)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277434
TRX.MR.NUM.BY.TA.17
S4417A:Number of MRs (TA = 17)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277435
TRX.MR.NUM.BY.TA.18
S4418A:Number of MRs (TA = 18)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277436
TRX.MR.NUM.BY.TA.19
S4419A:Number of MRs (TA = 19)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277437
TRX.MR.NUM.BY.TA.20
S4420A:Number of MRs (TA = 20)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277438
TRX.MR.NUM.BY.TA.21
S4421A:Number of
BSC6910
GBFD-
Processing of
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
186/201
16/7/2015
Handover Feature Parameter Description s
= GBFD110802
easuremen Report Pre-processing of Measurement Report
1278277439
TRX.MR.NUM.BY.TA.22
S4422A:Number of MRs (TA = 22)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277440
TRX.MR.NUM.BY.TA.23
S4423A:Number of MRs (TA = 23)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277441
TRX.MR.NUM.BY.TA.24
S4424A:Number of MRs (TA = 24)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277442
TRX.MR.NUM.BY.TA.25
S4425A:Number of MRs (TA = 25)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277443
TRX.MR.NUM.BY.TA.26
S4426A:Number of MRs (TA = 26)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277444
TRX.MR.NUM.BY.TA.27
S4427A:Number of MRs (TA = 27)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277445
TRX.MR.NUM.BY.TA.28
S4428A:Number of MRs (TA = 28)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277446
TRX.MR.NUM.BY.TA.29
S4429A:Number of MRs (TA = 29)
BSC6910
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277447
TRX.MR.NUM.BY.TA.30.TO.31
S4430A:Number of MRs (TA = 30 or 31)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277448
TRX.MR.NUM.BY.TA.32.TO.33
S4432A:Number of MRs (TA = 32 or 33)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277449
TRX.MR.NUM.BY.TA.34.TO.35
S4434A:Number of MRs (TA = 34 or 35)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277450
TRX.MR.NUM.BY.TA.36.TO.37
S4436A:Number of MRs (TA = 36 or 37)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277451
TRX.MR.NUM.BY.TA.38.TO.39
S4438A:Number of MRs (TA = 38 or 39)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277452
TRX.MR.NUM.BY.TA.40.TO.44
S4440A:Number of MRs (TA = 40 to 44)
BSC6910
GBFD 110801 GBFD-
Processing of Measurement Report
110802
Pre-processing
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
187/201
16/7/2015
Handover Feature Parameter Description Report
1278277453
TRX.MR.NUM.BY.TA.45.TO.49
S4445A:Number of MRs (TA = 45 to 49)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277454
TRX.MR.NUM.BY.TA.50.TO.54
S4450A:Number of MRs (TA = 50 to 54)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277455
TRX.MR.NUM.BY.TA.55.TO.63
S4455A:Number of MRs (TA = 55 to 63)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278277456
TRX.MR.NUM.BY.TA.GT.63
S4463A:Number of MRs (TA greater than 63)
BSC6910
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278280457
TRX.RQI.MR.NUM.BY.TA.0
S4400C:MRs with RQI (TA = 0)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280458
TRX.RQI.MR.NUM.BY.TA.1
S4401C:MRs with RQI (TA = 1)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280459
TRX.RQI.MR.NUM.BY.TA.2
S4402C:MRs with RQI (TA = 2)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280460
TRX.RQI.MR.NUM.BY.TA.3
S4403C:MRs with RQI (TA = 3)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280461
TRX.RQI.MR.NUM.BY.TA.4
S4404C:MRs with RQI (TA = 4)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280462
TRX.RQI.MR.NUM.BY.TA.5
S4405C:MRs with RQI (TA = 5)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280463
TRX.RQI.MR.NUM.BY.TA.6
S4406C:MRs with RQI (TA = 6)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280464
TRX.RQI.MR.NUM.BY.TA.7
S4407C:MRs with RQI (TA = 7)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280465
TRX.RQI.MR.NUM.BY.TA.8
S4408C:MRs with RQI (TA = 8)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280466
TRX.RQI.MR.NUM.BY.TA.9
S4409C:MRs with RQI (TA = 9)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280467
TRX.RQI.MR.NUM.BY.TA.10
S4410C:MRs with RQI (TA = 10)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280468
TRX.RQI.MR.NUM.BY.TA.11
S4411C:MRs with RQI (TA = 11)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280469
TRX.RQI.MR.NUM.BY.TA.12
S4412C:MRs with RQI (TA = 12)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280470
TRX.RQI.MR.NUM.BY.TA.13
S4413C:MRs with RQI (TA = 13)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280471
TRX.RQI.MR.NUM.BY.TA.14
S4414C:MRs with RQI (TA = 14)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280472
TRX.RQI.MR.NUM.BY.TA.15
S4415C:MRs with RQI (TA = 15)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280473
TRX.RQI.MR.NUM.BY.TA.16
S4416C:MRs with RQI (TA = 16)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280474
TRX.RQI.MR.NUM.BY.TA.17
S4417C:MRs with RQI (TA = 17)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280475
TRX.RQI.MR.NUM.BY.TA.18
S4418C:MRs with RQI (TA = 18)
BSC6910
GBFD115504
AMR FR/HR Dynamic
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
188/201
16/7/2015
Handover Feature Parameter Description
1278280476
TRX.RQI.MR.NUM.BY.TA.19
S4419C:MRs with RQI (TA = 19)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280477
TRX.RQI.MR.NUM.BY.TA.20
S4420C:MRs with RQI (TA = 20)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280478
TRX.RQI.MR.NUM.BY.TA.21
S4421C:MRs with RQI (TA = 21)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280479
TRX.RQI.MR.NUM.BY.TA.22
S4422C:MRs with RQI (TA = 22)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280480
TRX.RQI.MR.NUM.BY.TA.23
S4423C:MRs with RQI (TA = 23)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280481
TRX.RQI.MR.NUM.BY.TA.24
S4424C:MRs with RQI (TA = 24)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280482
TRX.RQI.MR.NUM.BY.TA.25
S4425C:MRs with RQI (TA = 25)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280483
TRX.RQI.MR.NUM.BY.TA.26
S4426C:MRs with RQI (TA = 26)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280484
TRX.RQI.MR.NUM.BY.TA.27
S4427C:MRs with RQI (TA = 27)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280485
TRX.RQI.MR.NUM.BY.TA.28
S4428C:MRs with RQI (TA = 28)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280486
TRX.RQI.MR.NUM.BY.TA.29
S4429C:MRs with RQI (TA = 29)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280487
TRX.RQI.MR.NUM.BY.TA.30.TO.31
S4430C:MRs with RQI (TA = 30 or 31)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280488
TRX.RQI.MR.NUM.BY.TA.32.TO.33
S4432C:MRs with RQI (TA = 32 or 33)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280489
TRX.RQI.MR.NUM.BY.TA.34.TO.35
S4434C:MRs with RQI (TA = 34 or 35)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280490
TRX.RQI.MR.NUM.BY.TA.36.TO.37
S4436C:MRs with RQI (TA = 36 or 37)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280491
TRX.RQI.MR.NUM.BY.TA.38.TO.39
S4438C:MRs with RQI (TA = 38 or 39)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280492
TRX.RQI.MR.NUM.BY.TA.40.TO.44
S4440C:MRs with RQI (TA = 40 to 44)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280493
TRX.RQI.MR.NUM.BY.TA.45.TO.49
S4445C:MRs with RQI (TA = 45 to 49)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280494
TRX.RQI.MR.NUM.BY.TA.50.TO.54
S4450C:MRs with RQI (TA = 50 to 54)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280495
TRX.RQI.MR.NUM.BY.TA.55.TO.63
S4455C:MRs with RQI (TA = 55 to 63)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280496
TRX.RQI.MR.NUM.BY.TA.GT.63
S4463C:MRs with RQI (TA greater than 63)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280497
TRX.RQI.NUM.BY.TA.0.AVR
AS4400D:Mean RQI (TA = 0)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280498
TRX.RQI.NUM.BY.TA.1.AVR
AS4401D:Mean RQI (TA = 1)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280499
TRX.RQI.NUM.BY.TA.2.AVR
AS4402D:Mean RQI (TA = 2)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280500
TRX.RQI.NUM.BY.TA.3.AVR
AS4403D:Mean RQI (TA = 3)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280501
TRX.RQI.NUM.BY.TA.4.AVR
AS4404D:Mean RQI (TA = 4)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
189/201
16/7/2015
Handover Feature Parameter Description
1278280502
TRX.RQI.NUM.BY.TA.5.AVR
AS4405D:Mean RQI (TA = 5)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280503
TRX.RQI.NUM.BY.TA.6.AVR
AS4406D:Mean RQI (TA = 6)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280504
TRX.RQI.NUM.BY.TA.7.AVR
AS4407D:Mean RQI (TA = 7)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280505
TRX.RQI.NUM.BY.TA.8.AVR
AS4408D:Mean RQI (TA = 8)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280506
TRX.RQI.NUM.BY.TA.9.AVR
AS4409D:Mean RQI (TA = 9)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280507
TRX.RQI.NUM.BY.TA.10.AVR
AS4410D:Mean RQI (TA = 10)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280508
TRX.RQI.NUM.BY.TA.11.AVR
AS4411D:Mean RQI (TA = 11)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280509
TRX.RQI.NUM.BY.TA.12.AVR
AS4412D:Mean RQI (TA = 12)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280510
TRX.RQI.NUM.BY.TA.13.AVR
AS4413D:Mean RQI (TA = 13)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280511
TRX.RQI.NUM.BY.TA.14.AVR
AS4414D:Mean RQI (TA = 14)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280512
TRX.RQI.NUM.BY.TA.15.AVR
AS4415D:Mean RQI (TA = 15)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280513
TRX.RQI.NUM.BY.TA.16.AVR
AS4416D:Mean RQI (TA = 16)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280514
TRX.RQI.NUM.BY.TA.17.AVR
AS4417D:Mean RQI (TA = 17)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280515
TRX.RQI.NUM.BY.TA.18.AVR
AS4418D:Mean RQI (TA = 18)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280516
TRX.RQI.NUM.BY.TA.19.AVR
AS4419D:Mean RQI (TA = 19)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280517
TRX.RQI.NUM.BY.TA.20.AVR
AS4420D:Mean RQI (TA = 20)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280518
TRX.RQI.NUM.BY.TA.21.AVR
AS4421D:Mean RQI (TA = 21)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280519
TRX.RQI.NUM.BY.TA.22.AVR
AS4422D:Mean RQI (TA = 22)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280520
TRX.RQI.NUM.BY.TA.23.AVR
AS4423D:Mean RQI (TA = 23)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280521
TRX.RQI.NUM.BY.TA.24.AVR
AS4424D:Mean RQI (TA = 24)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280522
TRX.RQI.NUM.BY.TA.25.AVR
AS4425D:Mean RQI (TA = 25)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280523
TRX.RQI.NUM.BY.TA.26.AVR
AS4426D:Mean RQI (TA = 26)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280524
TRX.RQI.NUM.BY.TA.27.AVR
AS4427D:Mean RQI (TA = 27)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280525
TRX.RQI.NUM.BY.TA.28.AVR
AS4428D:Mean RQI (TA = 28)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280526
TRX.RQI.NUM.BY.TA.29.AVR
AS4429D:Mean RQI (TA = 29)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280527
TRX.RQI.NUM.BY.TA.30.TO.31.AVR
AS4430D:Mean RQI (TA = 30 or 31)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280528
TRX.RQI.NUM.BY.TA.32.TO.33.AVR
AS4432D:Mean RQI
BSC6910
GBFD-
AMR FR/HR
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
190/201
16/7/2015
Handover Feature Parameter Description Adjustment
1278280529
TRX.RQI.NUM.BY.TA.34.TO.35.AVR
AS4434D:Mean RQI (TA = 34 or 35)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280530
TRX.RQI.NUM.BY.TA.36.TO.37.AVR
AS4436D:Mean RQI (TA = 36 or 37)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280531
TRX.RQI.NUM.BY.TA.38.TO.39.AVR
AS4438D:Mean RQI (TA = 38 or 39)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280532
TRX.RQI.NUM.BY.TA.40.TO.44.AVR
AS4440D:Mean RQI (TA = 40 to 44)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280533
TRX.RQI.NUM.BY.TA.45.TO.49.AVR
AS4445D:Mean RQI (TA = 45 to 49)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280534
TRX.RQI.NUM.BY.TA.50.TO.54.AVR
AS4450D:Mean RQI (TA = 50 to 54)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280535
TRX.RQI.NUM.BY.TA.55.TO.63.AVR
AS4455D:Mean RQI (TA = 55 to 63)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278280536
TRX.RQI.NUM.BY.TA.GT.63.AVR
AS4463D:Mean RQI (TA greater than 63)
BSC6910
GBFD115504
AMR FR/HR Dynamic Adjustment
1278287417
TRX.RQI.NUM.0.TO.1
S4400E:Number of BSC6910 Measurement Reports (RQI = 0 to 1)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287418
TRX.RQI.NUM.1.TO.2
S4401E:Number of BSC6910 Measurement Reports (RQI = 1 to 2)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287419
TRX.RQI.NUM.2.TO.3
S4402E:Number of BSC6910 Measurement Reports (RQI = 2 to 3)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287420
TRX.RQI.NUM.3.TO.4
S4403E:Number of BSC6910 Measurement Reports (RQI = 3 to 4)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287421
TRX.RQI.NUM.4.TO.5
S4404E:Number of BSC6910 Measurement Reports (RQI = 4 to 5)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287422
TRX.RQI.NUM.5.TO.6
S4405E:Number of BSC6910 Measurement Reports (RQI = 5 to 6)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287423
TRX.RQI.NUM.6.TO.7
S4406E:Number of BSC6910 Measurement Reports (RQI = 6 to 7)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287424
TRX.RQI.NUM.7.TO.8
S4407E:Number of BSC6910 Measurement Reports (RQI = 7 to 8)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287425
TRX.RQI.NUM.8.TO.9
S4408E:Number of BSC6910 Measurement Reports (RQI = 8 to 9)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287426
TRX.RQI.NUM.9.TO.10
S4409E:Number of BSC6910 Measurement Reports (RQI = 9 to 10)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287427
TRX.RQI.NUM.10.TO.11
S4410E:Number of BSC6910 Measurement Reports (RQI = 10 to 11)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287428
TRX.RQI.NUM.11.TO.12
S4411E:Number of BSC6910 Measurement Reports (RQI = 11 to 12)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287429
TRX.RQI.NUM.12.TO.13
S4412E:Number of BSC6910 Measurement Reports (RQI = 12 to 13)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287430
TRX.RQI.NUM.13.TO.14
S4413E:Number of BSC6910 Measurement Reports (RQI = 13 to 14)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287431
TRX.RQI.NUM.14.TO.15
S4414E:Number of BSC6910 Measurement Reports (RQI = 14 to 15)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287432
TRX.RQI.NUM.15.TO.25
S4415E:Number of BSC6910 Measurement Reports (RQI = 15 to 25)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287433
TRX.RQI.NUM.25.TO.35
S4416E:Number of BSC6910 Measurement Reports (RQI = 25 to 35)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287434
TRX.RQI.NUM.35.TO.45
S4417E:Number of BSC6910 Measurement Reports (RQI = 35 to 45)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
191/201
16/7/2015
Handover Feature Parameter Description .
.
. .
.
: um er o Measurement Reports (RQI = 45 to 55)
115504
Dynamic Adjustment
1278287436
TRX.RQI.NUM.GT.55
S4419E:Number of BSC6910 Measurement Reports (RQI greater than 55)
GBFD- 115504
AMR FR/HR Dynamic Adjustment
1278287457
TRX.RQI.MR.TOTAL.NUM
S4440E:Number of BSC6910 Measurement Reports with RQI
GBFD 115504
AMR FR/HR Dynamic Adjustment
1278288417
TRX.FR.DOWN.RX.QLTY.0.NEW
NCS412A:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 0)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288418
TRX.FR.DOWN.RX.QLTY.1.NEW
NCS412B:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 1)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288419
TRX.FR.DOWN.RX.QLTY.2.NEW
NCS412C:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 2)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288420
TRX.FR.DOWN.RX.QLTY.3.NEW
NCS412D:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 3)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288421
TRX.FR.DOWN.RX.QLTY.4.NEW
NCS412E:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 4)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288422
TRX.FR.DOWN.RX.QLTY.5.NEW
NCS412F:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 5)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288423
TRX.FR.DOWN.RX.QLTY.6.NEW
NCS412G:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 6)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288424
TRX.FR.DOWN.RX.QLTY.7.NEW
NCS412H:Number of BSC6910 MRs on Downlink TCHF (Receive Quality Rank 7)
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288425
TRX.FR.UP.RX.QLTY.0.NEW
NCS413A:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 0)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288426
TRX.FR.UP.RX.QLTY.1.NEW
NCS413B:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 1)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288427
TRX.FR.UP.RX.QLTY.2.NEW
NCS413C:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 2)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288428
TRX.FR.UP.RX.QLTY.3.NEW
NCS413D:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 3)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288429
TRX.FR.UP.RX.QLTY.4.NEW
NCS413E:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 4)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
192/201
16/7/2015
Handover Feature Parameter Description
1278288430
TRX.FR.UP.RX.QLTY.5.NEW
NCS413F:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 5)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288431
TRX.FR.UP.RX.QLTY.6.NEW
NCS413G:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 6)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278288432
TRX.FR.UP.RX.QLTY.7.NEW
NCS413H:Number of BSC6910 MRs on Uplink TCHF (Receive Quality Rank 7)
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278699491
BSCRPT.INTRACELL.HO.FAIL.RECONN.FAIL
ZCH902C:Failed Reconnections to Old Channels upon IntraCell Handover Failure per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699492
BSCRPT.INTRACELL.HO.FAIL.RECONN.SUCC
ZCH902D:Successful BSC6910 Reconnections to Old Channels upon IntraCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699493
BSC RPT. IN TR ABSC .OU TC ELL. HO. FAI L. RE CON N. FAI L
ZC H912C :Fai led BSC6910 Reconnections to Old Channels upon Outgoing Internal InterCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699494
BSC RPT. IN TR ABSC .OU TC ELL. HO. FAI L. RE CON N. SU CC
ZC H912D :Suc ces sf ul BSC6910 Reconnections to Old Channels upon Outgoing Internal InterCell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699495
BSC RPT. IN TER BSC .OU TC ELL. HO. FAI L. RE CON N. FAI L
ZC H932C :Fai led Reconnections to Old Channels upon Outgoing External Inter-Cell Handover Failure per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699496
BSC RPT. IN TER BSC .OU TC ELL. HO. FAI L. RE CON N. SU CC
ZC H932D :Suc ces sf ul BSC6910 Reconnections to Old Channels upon Outgoing External Inter-Cell Handover Failure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699499
BSCRPT.INTERBSC.INCELL.HO.FAIL.CONTENTS.INVALID
ZH942I:Failed Incoming External Inter-Cell Handovers per BSC (Illegal Message)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699500
BSCRPT.INTERBSC.INCELL.HO.FAIL.CONG
ZCH942A:Failed Incoming External Inter-Cell Handovers per BSC (Channel Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699501
BSCRPT.INTERBSC.INCELL.HO.FAIL.NO.CIC
ZH942E:Failed Incoming External Inter-Cell Handovers per BSC (Requested Territorial Resource Unavailable)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699502
BSCRPT.INTERBSC.INCELL.HO.FAIL.CIC.AVAIL
ZH942F:Failed Incoming External Inter-Cell Handovers per BSC (Territorial Resource Already Allocated)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699503
BSC RPT. IN TER BSC .I NC ELL. HO. FAI L. APPLY. TR SL. FAI L
ZH 942B: Failed Incoming External Inter-Cell Handovers per BSC (Equipment Failure)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699504
BSCRPT.INTERBSC.INCELL.HO.FAIL.TIEMER.OUT
ZCH9420C:Failed Incoming External Inter-Cell Handovers per BSC (Timer Expired)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699505
BSC RPT. IN TER BSC .I NC ELL. HO. FAI L. MSC .C LEAR .C MD
ZH 942H: Fai led Incoming External
BSC6910
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
Inter-Cell Handovers
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
193/201
16/7/2015
Handover Feature Parameter Description Commands Sent By MSC)
1278699506
BSCRPT.INTERBSC.INCELL.HO.CH.ACT.NACK
ZCR9350B:CHAN BSC6910 ACT NACK Messages Sent by BTS in Incoming External Inter-Cell Handover Procedure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278699507
BSCRPT.INTERBSC.INCELL.HO.CH.ACT.EXP
ZCR9350C:Channel BSC6910 Activation Timeouts in Incoming External Inter-Cell Handover Procedure per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700443
BSCRPT.HO.REQ.UL.QLTY
ZCH970A:Attempted BSC6910 Handovers per BSC (Uplink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700444
BSCRPT.HO.REQ.DL.QLTY
ZCH970B:Attempted Handovers per BSC (Downlink Signal Quality)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700445
BSCRPT.HO.REQ.UL.RXL
ZCH970C:Attempted Handovers per BSC (Uplink Signal Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700446
BSCRPT.HO.REQ.DL.RXL
ZCH970D:Attempted Handovers per BSC (Downlink Signal Strength)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700447
BSCRPT.HO.REQ.TA
ZCH970E:Attempted Handovers per BSC (Timing Advance)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700448
BSCRPT.HO.REQ.BETTER.CELL
ZCH970F:Attempted BSC6910 Handovers for Better Cell per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700449
BSCRPT.HO.REQ.LOAD
ZCH970G:Attempted Handovers for Traffic Load per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700450
BSCRPT.HO.REQ.RAPID.LEV.DROP
ZCH970H:Attempted Handovers per BSC (Rapid Level Drop)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700451
BSCRPT.HO.REQ.MSC.INTERVENTION
ZCH970I:Attempted Handovers for MSC Intervention per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700452
BSCRPT.HO.REQ.OM.INTERVENTION
ZCH970J:Attempted Handovers for OM Intervention per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700453
BSCRPT.HO.REQ.OTHER
ZCH970L:HO Requests per BSC (Other Causes)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278700456
BSCRPT.HO.REQ.AMR
ZCH9005:Number of BSC6910 Attempted Intra-Cell Handovers Between TCHF and TCHH per BSC
GBFD- 110601 GBFD510501 GBFD115504
HUAWEI I Handover HUAWEI II Handover AMR FR/HR Dynamic Adjustment
1278700457
BSCRPT.HO.REQ.DR
ZCH9701:Attempted Handovers per BSC (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278701445
BSCRPT.HO.SUCC.UL.QLTY
ZCH973A:Successful BSC6910 Handovers per BSC (Uplink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701446
BSCRPT.HO.SUCC.DL.QLTY
ZCH973B:Successful BSC6910 Handovers per BSC (Downlink Signal Quality)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701447
BSCRPT.HO.SUCC.UL.RXL
ZCH973C:Successful BSC6910 Handovers per BSC (Uplink Signal Strength)
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
510501
Handover
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
194/201
16/7/2015
Handover Feature Parameter Description .
.
.
.
: uccess u Handovers per BSC (Downlink Signal Strength)
110601 GBFD510501
Handover HUAWEI II Handover
1278701449
BSCRPT.HO.SUCC.TA
ZCH973E:Successful BSC6910 Handovers per BSC (Timing Advance)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701450
BSCRPT.HO.SUCC.BETTER.CELL
ZCH973F:Successful BSC6910 Handovers per BSC (Better Cell)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701451
BSCRPT.HO.SUCC.LOAD
ZCH973G:Successful BSC6910 Handovers per BSC (Load)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701452
BSCRPT.HO.SUCC.RAPID.LEV.DROP
ZCH973H:Successful BSC6910 Handovers per BSC (Rapid Level Drop)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701453
BSCRPT.HO.SUCC.MSC.INTERVENTION
ZCH973I:Successful Handovers per BSC (MSC Intervention)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701454
BSCRPT.HO.SUCC.OM.INTERVENTION
ZCH973J:Successful BSC6910 Handovers per BSC (OM Intervention)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701455
BSCRPT.HO.SUCC.OTHER
ZCH973L:Successful BSC6910 Handovers per BSC (Other Causes)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278701458
BSCRPT.HO.SUCC.AMR
ZH9035:Number of BSC6910 Successful Intra-Cell Handovers Between TCHF and TCHH per BSC
GBFD 110601 GBFD510501 GBFD115504
HUAWEI I Handover HUAWEI II Handover AMR FR/HR Dynamic Adjustment
1278701459
BSCRPT.HO.SUCC.DR
ZH9731:Successful Handovers per BSC (Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1278702417
BSCRPT.INTRABSC.INTERCELL. HO. REQ. 900.1800
ZCH900Y:Int ernal Inter-Cell Handover Attempts per BSC (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702418
BSCRPT.INTRABSC.INTERCELL. HO. REQ. 1800.900
ZCH900Z:Internal Inter-Cell Handover Attempts per BSC (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702419
BSC RPT. IN TR ABSC .I NTER CELL. HO. SU CC .900. 1800
ZC H903Y :Suc ces sf ul BSC6910 Internal Inter-Cell Handovers per BSC (900/850/810 1800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702420
BSC RPT. IN TR ABSC .I NTER CELL. HO. SU CC .1800. 900
ZC H903Z: Suc ces sf ul BSC6910 Internal Inter-Cell Handovers per BSC (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702421
BSCRPT.INBSC.HO.REQ.900.1800
ZCH940Y:Incoming BSC Handover Attempts per BSC (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702422
BSCRPT.INBSC.HO.REQ.1800.900
ZCH940Z:Incoming BSC Handover Attempts per BSC (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702423
BSCRPT.INBSC.HO.SUCC.900.1800
ZCH943Y:Successful BSC6910 Incoming BSC Handovers per BSC (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702424
BSCRPT.INBSC.HO.SUCC.1800.900
ZCH943Z:Successful BSC6910 Incoming BSC Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
(1800/1900-
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
195/201
16/7/2015
Handover Feature Parameter Description
1278702425
BSCRPT.OUTBSC.HO.REQ.900.1800
ZCH930Y:Outgoing BSC Handover Attempts per BSC (900/850/8101800/1900)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702426
BSCRPT.OUTBSC.HO.REQ.1800.900
ZCH930Z:Outgoing BSC Handover Attempts per BSC (1800/1900900/850/810)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702427
BSCRPT.OUTBSC.HO.SUCC.900.1800
ZCH933Y:Successful BSC6910 Outgoing BSC Handovers per BSC (900/850/8101800/1900)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278702428
BSCRPT.OUTBSC.HO.SUCC.1800.900
ZCH933Z:Successful BSC6910 Outgoing BSC Handovers per BSC (1800/1900900/850/810)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703566
BSCRPT.INTRACELL.HO.REQ
ZCH300:Internal Intra- BSC6910 Cell Handover Requests per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703567
BSCRPT.INTRACELL.HO.CMD
ZCH301:Internal Intra- BSC6910 Cell Handover Commands per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703568
BSCRPT.INTRACELL.HO.SUCC
ZCH303:Successful Internal Intra-Cell Handovers per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703569
BSCRPT.INTRABSC.OUTCELL.HO.REQ
ZCH310:Outgoing Internal Inter-Cell Handover Requests per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703570
BSCRPT.INTRABSC.OUTCELL.HO.CMD
ZCH311:Outgoing Internal Inter-Cell Handover Commands per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703571
BSCRPT.INTRABSC.OUTCELL.HO.SUCC
ZCH313:Successful BSC6910 Outgoing Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703572
BSCRPT.INTRABSC.INCELL.HO.REQ
ZCH320:Incoming Internal Inter-Cell Handover Requests per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703573
BSCRPT.INTRABSC.INCELL.HO.CMD
ZK3190:Incoming Internal Inter-Cell Handover Commands per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703574
BSCRPT.INTRABSC.INCELL.HO.SUCC
ZCH323:Successful BSC6910 Incoming Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703575
BSCRPT.INTERBSC.OUTCELL.HO.REQ
ZCH330:Outgoing External Inter-Cell Handover Requests per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703576
BSCRPT.INTERBSC.OUTCELL.HO.CMD
ZCH331:Outgoing External Inter-Cell Handover Commands per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703577
BSCRPT.INTERBSC.OUTCELL.HO.SUCC
ZCH333:Successful Outgoing External Inter-Cell Handovers per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703578
BSCRPT.INTERBSC.INCELL.HO.REQ
ZCH340:Incoming External Inter-Cell Handover Requests per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703579
BSCRPT.INTERBSC.INCELL.HO.CMD
ZK3191:Incoming External Inter-Cell Handover Commands per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703580
BSCRPT.INTERBSC.INCELL.HO.SUCC
ZCH343:Successful Incoming External Inter-Cell Handovers per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703581
BSCRPT.KPI.DUBAND.HO.REQ
ZK3170:Dual-Band
BSC6910
GBFD-
HUAWEI I
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
196/201
16/7/2015
Handover Feature Parameter Description per BSC
GBFD510501
HUAWEI II Handover
1278703582
BSCRPT.KPI.DUBAND.HO.SUCC
ZK3173:Successful Dual-Band Handovers per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703583
BSCRPT.INTERBSC.INCELL.HO.REQ.DIFFERENT.SIG.POINT
ZK3192:Outgoing External Inter-Cell Handover Requests (Different Signaling Points) per BSC
BSC6910
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703584
BSCRPT.INTERBSC.INCELL.HO.FAIL.DIFFERENT.SIG.POINT
ZK3193:Failed Outgoing External Inter-Cell Handovers (Different Signaling Points) per BSC
BSC6910
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703585
BSCRPT.INTERBSC.INCELL.HO.CMD.DIFFERENT.SIG.POINT
ZK3194:Outgoing External Inter-Cell Handover Commands (Different Signaling Points) per BSC
BSC6910
GBFD110601 GBFD510501 GBFD115301
HUAWEI I Handover HUAWEI II Handover Local Multiple Signaling Points
1278703586
BSCRPT.KPI.INTRABSC.HO.SUCC.RATE
ZK3174:Internal Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703587
BSC RPT. KPI .I NTR ABSC .W IR ELE SS. HO. SU CC .R ATE
ZK3175: Int ernal R adio BSC6910 Handover Success Rate per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703588
BSCRPT.KPI .INTERBSC.OUTCELL.HO.SUCC.RATE
ZK3176:Outgoing External Inter-Cell Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703589
BSCRPT.KPI.INTERBSC.OUTCELL.WIRELESS.HO.SUCC.RATE
ZK3177:Outgoing External Inter-Cell Radio Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703590
BSCRPT.KPI.INTERBSC.INCELL.HO.SUCC.RATE
ZK3178:Incoming External Inter-Cell Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703591
BSCRPT.KPI.INTERBSC.INCELL.WIRELESS.HO.SUCC.RATE
ZK3179:Incoming External Inter-Cell Radio Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703592
BSCRPT.KPI.HO.SUCC.RATE
ZK3180:Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703593
BSCRPT.KPI.WIRELESS.HO.SUCC.RATE
ZK3181:Radio Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703594
BSCRPT.KPI.DUBAND.HO.SUCC.RATE
ZK3182:Dual-Band Handover Success Rate per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703595
BSCRPT.INTRABSC.OUTCELL.HO.FAIL
ZCH313F:Failed BSC6910 Outgoing Internal InterCell Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703596
BSCRPT.INTERBSC.OUTCELL.HO.FAIL
ZCH333F:Failed Outgoing External Inter-Cell Handovers per BSC
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278703597
BSCRPT.KPI.DUBAND.HO.FAIL
ZK3173F:Failed Dual- BSC6910 Band Handovers per BSC
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1278706449
BSCRPT.FR.UP.RX.QLTY.0.AVR
ZS4180SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 0) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706450
BSCRPT.FR.UP.RX.QLTY.1.AVR
ZS4181SA:Number of
GBFD-
Processing of
BSC6910
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
197/201
16/7/2015
Handover Feature Parameter Description (Mean Receive Quality Rank 1) per BSC
GBFD110802
Report Pre-processing of Measurement Report
1278706451
BSCRPT.FR.UP.RX.QLTY.2.AVR
ZS4182SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 2) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706452
BSCRPT.FR.UP.RX.QLTY.3.AVR
ZS4183SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 3) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706453
BSCRPT.FR.UP.RX.QLTY.4.AVR
ZS4184SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 4) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706454
BSCRPT.FR.UP.RX.QLTY.5.AVR
ZS4185SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 5) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706455
BSCRPT.FR.UP.RX.QLTY.6.AVR
ZS4186SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 6) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706456
BSCRPT.FR.UP.RX.QLTY.7.AVR
ZS4187SA:Number of BSC6910 MRs on Uplink TCHF (Mean Receive Quality Rank 7) per BSC
GBFD- 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706457
BSCRPT.FR.DOWN.RX.QLTY.0.AVR
ZS4180SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 0) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706458
BSCRPT.FR.DOWN.RX.QLTY.1.AVR
ZS4181SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 1) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706459
BSCRPT.FR.DOWN.RX.QLTY.2.AVR
ZS4182SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 2) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706460
BSCRPT.FR.DOWN.RX.QLTY.3.AVR
ZS4183SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 3) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706461
BSCRPT.FR.DOWN.RX.QLTY.4.AVR
ZS4184SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 4) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706462
BSCRPT.FR.DOWN.RX.QLTY.5.AVR
ZS4185SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 5) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706463
BSCRPT.FR.DOWN.RX.QLTY.6.AVR
ZS4186SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 6) per BSC
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement Report
1278706464
BSCRPT.FR.DOWN.RX.QLTY.7.AVR
ZS4187SB:Number of BSC6910 MRs on Downlink TCHF (Mean Receive Quality Rank 7) per
GBFD 110801 GBFD110802
Processing of Measurement Report Pre-processing of Measurement
BSC
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
198/201
16/7/2015
Handover Feature Parameter Description
1282412169
CELL.ASS.REQ.SIG.TCH.OPT.TIMEOUT
A3101J:Assignment BSC6910 Requests for Serving Cell (Maximum Better Cell Assigning Duration Timeout)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412170
C ELL. IN TR ABSC .OU TC ELL. HO. REQ. BETTER .D R. CELL
H 3100N :N umber of BSC6910 Outgoing Internal InterCell Handover Requests (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412171
C ELL. IN TR ABSC .OU TC ELL. HO. CMD .BETTE R. DR .CE LL
H 3110N :N umber of BSC6910 Outgoing Internal InterCell Handover Commands (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412172
C ELL. IN TR ABSC .OU TC ELL. HO. FAI L. BETTER .D R. CELL
H 3120N :N umber of Failed Outgoing Internal Inter-Cell Handovers (SDCCH) (Better Cell Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412173
C ELL. IN TER BSC .OU TC ELL. HO. REQ. BETTER .D R. CELL
H 3300N :N umber of Outgoing External Inter-Cell Handover Requests (SDCCH) (Better Cell Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412174
C ELL. IN TER BSC .OU TC ELL. HO. CMD .BETTE R. DR .CE LL
H 3310N :N umber of BSC6910 Outgoing External Inter-Cell Handover Commands (SDCCH) (Better Cell Directed Retry)
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282412175
C ELL. IN TER BSC .OU TC ELL. HO. FAI L. BETTER .D R. CELL
H 3320N :N umber of Failed Outgoing External Inter-Cell Handovers (SDCCH) (Better Cell Directed Retry)
BSC6910
GBFD110601 GBFD510501 GBFD110607
HUAWEI I Handover HUAWEI II Handover Direct Retry
1282429839
CELL.NO.DL.MR.NUM
CS3032:Number of BSC6910 Measurement Reports Without DL Measurement Information
GBFD- 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433049
CELLCELL.OUTCELL.CMD.DR
H371K:Outgoing Inter- BSC6910 Cell Handover Commands (Directed Retry)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433055
CELL.INTRACELL.HO.FAIL.UL.INTERFERE
H0021C:Number of BSC6910 Intra-cell Handover Failures Due to Uplink Interference
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282433056
CELL.INTRACELL.HO.FAIL.DL.INTERFERE
H0021D:Number of Intra-cell Handover Failures Due to Downlink Interference
BSC6910
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282433912
CELLCELL.OUT.CELL.HO.REQ. TIMES.FREQ.SHI FT
H375C:Number of Outgoing Inter-Cell Handover Requests (Frequency Offset Handover)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433913
CELLCELL.OUTCELL.CMD.FREQ.SHIFT
H375D:Number of Outgoing Inter-cell Handover Command Send Times (Frequency offset handover)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433914
CELLCELL.OUT.CELL.FAIL.TIMES.FREQ.SHIFT
H375F:Number of Failed Outgoing Intercell Handovers (Frequency Offset Handover)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433915
CELLCELL.OUT.CELL.HO.REQ. TIMES.FAST.PBGT
H375G:Number of Outgoing Inter-cell Handover Requests (Quick PBGT Handover)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282433916
CELLCELL.OUTCELL.CMD.FAST.PBGT
H375H:Number of Outgoing Inter-cell Handover Command Send Times (Quick
BSC6910
GBFD110601
HUAWEI I Handover
GBFD-
HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
199/201
16/7/2015
Handover Feature Parameter Description
1282433917
CELLCELL.OUT.CELL.FAIL.TIMES.FAST.PBGT
H375J:Number of BSC6910 GBFDFailed Outgoing Inter110601 cell Handovers (Quick GBFDPBGT Handover) 510501
HUAWEI I Handover HUAWEI II Handover
1282433945
CELL.HO.TIMES.DUR.STABLE.DTX.PER
H3119LD:Number of BSC6910 handovers during a stable DTX period
GBFD 115709 GBFD110601 GBFD510501
Smooth Voice Call Handover HUAWEI I Handover HUAWEI II Handover
1282433946
CELL.HO.TIMES.DUR.SPEECH.SIG.TRANS
H3119LS:Number of BSC6910 handovers during speech signal transmission
GBFD115709 GBFD110601 GBFD510501
Smooth Voice Call Handover HUAWEI I Handover HUAWEI II Handover
1282434373
CELL.INTRACELL.HO.CMD.UL.INTERFERE
H0021E:Number of Intra-BSC Intra-Cell Handover Command (Uplink Interference)
BSC6910
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282434374
CELL.INTRACELL.HO.CMD.DL.INTERFERE
H0021F:Number of BSC6910 Intra-BSC Intra-Cell Handover Command ( Downlink Interference)
GBFD113201 GBFD510501
Concentric Cell HUAWEI II Handover
1282448074
CELL.INTRABSC.INCELL.HO.REQ.TCH
CH3209A:Number of BSC6910 Incoming Internal InterCell Handover Requests (TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448075
CELL.INTRABSC.INCELL.HO.REQ.ACK.TCH
CH3219A:Number of BSC6910 Incoming Internal InterCell Handover Responses(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448076
CELL.INTRABSC.INCELL.HO.FAIL.TCH
CH3229A:Number of BSC6910 Failed Incoming Internal Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448077
CELL.INTERBSC.INCELL.HO.REQ.TOTAL.TCH
CH3409A:Number of BSC6910 Incoming External Inter-Cell Handover Requests(TCH)
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448078
CELL.INTERBSC.INCELL.HO.REQ.ACK.TCH
CH3419A:Number of BSC6910 Incoming External Inter-Cell Handover Responses(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448079
CELL.INTERBSC.INCELL.HO.FAIL.TCH
CH3429A:Number of BSC6910 Failed Incoming External Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448080
CELL.INTRABSC.OUTCELL.HO.REQ.TCH
CH3109A:Number of BSC6910 Outgoing Internal InterCell Handover Requests(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448081
CELL.INTRABSC.OUTCELL.HO.CMD.TCH
CH3119A:Number of BSC6910 Outgoing Internal InterCell Handover Commands(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448082
CELL.INTRABSC.OUTCELL.HO.FAIL.TCH
CH3129A:Number of BSC6910 Failed Outgoing Internal Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448083
CELL.INTERBSC.OUTCELL.HO.REQ.TCH
CH3309A:Number of BSC6910 Outgoing External Inter-Cell Handover Requests(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448084
CELL.INTERBSC.OUTCELL.HO.CMD.TCH
CH3319A:Number of BSC6910 Outgoing External Inter-Cell Handover Commands(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282448085
CELL.INTERBSC.OUTCELL.HO.FAIL.TCH
CH3329A:Number of BSC6910 Failed Outgoing External Inter-Cell Handovers(TCH)
GBFD 110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282450421
CELLCELL.OUT.CELL.HO.SUCC.TIMES.FREQ.SHI FT
H375E: Number of Successful Outgoing Inter-Cell Handovers (Frequency Offset Handover)
BSC6910
GBFD110601 GBFD510501
HUAWEI I Handover HUAWEI II Handover
1282450422
CELLCELL.OUT.CELL.HO.SUCC.TIMES.FAST.PBGT
H375I: Number of Successful Outgoing Inter-cell Handovers
BSC6910
GBFD110601 GBFD-
HUAWEI I Handover HUAWEI II
http://127.0.0.1:52199/hedex/pages/GEC02287/01/GEC02287/01/resources/en-us_bookmap_0000921086.html?ft=0&id=GEC02287_01_10060
200/201