Douce Hydro
Standard specification s: Standard Heavy He avy duty dut y hydraul hy draulic ic c yli nders - 3000 3000 PS PSII Square Squa re head head in dustr ial cyli nders Mounting dime dimensions: nsions: NFPA specifications and ANSI/B93.15 – 1981
Serie DHI - MT4 - Center trunnion mounting
-1-
Douce-Hydro, inc. – 51151 Celeste, Shelby Township, Michigan 48315 - USA Phone: 586-566-4725 – Fax: 212-918-1611 – Web Site: www.doucehydro.com
Douce Hydro
Standard specification s: Standard Heavy He avy duty dut y hydraul hy draulic ic c yli nders - 3000 3000 PS PSII Square Squa re head head in dustr ial cyli nders Mounting dime dimensions: nsions: NFPA specifications and ANSI/B93.15 – 1981
1. Application
7. Design:
All industries Construction with or without cushioning Dimensions in agreement with: NFPA specifications ANSI/B93.15 – 1981 Bore Sizes – 1 ½’’ through 8’’
Piston Rod: Medium carbon steel, ground, polished after coating allowing a long duration of packings.
2. Pressure Nominal Pressure: 3000 PSI
3. Cushioning The incorporated cushionings have a floating cushioning ring with automatic refeeding. An adjustment is foreseen at the both sides of the cylinder. Please call us in case of absorption of large cinetic energy (high speed, large mass in movement).
4. Fluid Standard Fluid – Mineral oil
5. Worki ng Temperatures -10° F to + 165° F
Cylinder Body: Steel honed
8. Protection Body cylinder: Primer external coating. Piston Rod: Coating hard-chromed 0.8 inch. For a very harsh environmental conditions, we recommend to use the KERADOUCE TM coating.
9. Brace rin g For long stroke, it is necessary to equip the cylinder with a brace ring. Its length must be added to the overall dimension of the cylinder.
10. Swivels type The standard swivels are of type GE… DO from INA Elges or GE…ES from SKF or equivalent suppliers. Other types are available on demand.
6. Velocity Maxi : 19’’ per second
-2-
Douce-Hydro, inc. – 51151 Celeste, Shelby Township, Michigan 48315 - USA Phone: 586-566-4725 – Fax: 212-918-1611 – Web Site: www.doucehydro.com
Douce Hydro
Standard specifications : Heavy dut y hydrauli c cylinders - 3000 PSI Square head indust rial cyli nders Mounting dimensions: NFPA specifications and ANSI/B93.15 – 1981
11. Packing
13. Installation
Cylinders are delivered with all ports plugged. The threaded pieces are protected by peelable varnish.
The mechanic installation and the hydraulic follow up system circuit have not to cause impacts, vibrations, transverse loads, bending effort. Otherwise, please contact us.
12. Operating 14. Stock ing The hydraulic circuits must be tight and bleeded. The presence of air in the circuit may cause seals’ destruction. A bleed device at the front and rear parts will equip each cylinder. The used fluid and the circuit must be totally clean. Before connection, all piping and connecting pipes must be cleaned and washed or carefully cleaned.
The cylinders must be stocked under heated-up shelter with normal temperature conditions and hygrometry. On demand, in case of prolonged stocking (more than 3 months), the cylinders can be supplied with oil.
15. Marking The whole hydraulic cylinders will have an identification label to be given for spares
-3-
Douce-Hydro, inc. – 51151 Celeste, Shelby Township, Michigan 48315 - USA Phone: 586-566-4725 – Fax: 212-918-1611 – Web Site: www.doucehydro.com
Douce Hydro
Standard specification s: Heavy dut y hyd rauli c cylin ders -3000 PSI Square head in dustr ial cyli nders Mounting dimensions: NFPA specificati ons and ANSI/B93 .15 – 1981
Serie DHI-MS2 – Side lugs
Serie DHI-MT2 – Cap trunnion mounting
Serie DHI-MS4 – Side tapped
Serie DHI-MT4 – Center trunnion mounting
Serie DHI-MX2 – Cap tie rods extended
Serie DHI-MS2 – Side lugs
Serie DHI-MX3 – Head tie rods extended
Serie DHI-ME5 – Head rectangular mounting
Serie DHI-MT1 – Head trunnion mounting
Serie DHI-ME6 – Cap rectangular mounting
- 4-
Douce Hydro
Heavy dut y hyd rauli c cylin ders – 3000 PSI Tightness - Code PP
Tightness - Code DC -
-
-
Piston tightness with 2 lipseals – Opposed polyurethan and guiding through bearers. Rod tightness with V packing or lipseal polyurethan, double lip wiper, and guiding through bearers.
This type of seals is particularly recommended for hard working conditions, industry, rolling mill, steel industr y, presses, naval and fluv ial industry.
-
Piston tightness with compound-seal and guiding through bearers.
-
Rod tightness with compound-seal, double lip wiper, and guiding through bearers.
-
This type of seals is particularly recommended for applications w ith very low friction as well as very low or very high speed.
-
Regulation.
P2 – Rod (chrome plated, or
01 - O-Ring
Keradouce®
02 - O-Ring
coating)
03 - O-Rring
P3 - Rod gland
10 - Piston sealdouble lip seal
P4- - Floating Ring P5 - Cushion sleeve
11 - Rod seal – Lip seal
P6 - Rod gland
12 - Wiper
P7- Screw
20 - Piston seal – compound seal
P9 - Screw
21 - Rod seal – compound seal 22 - Wiper 24 - Bearers
- 5-
Douce Hydro
Heavy dut y hyd rauli c cylin ders – 3000 PSI Rod end detail T WRENCH FLATS Ø KK
A
Bore 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
T WRENCH FLATS
C M M Ø Ø
Ø CC
S
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
A
Thread CC 1/2-20 7/8-14 7/8-14 1 1/4-12 7/8-14 1 1/4-12 1 1/2-12 1 1/2-12 1 1/2-12 1 3/4-12 1 1/2-12 1 3/4-12 2 1/4-12 1 3/4-12 2 1/4-12 2 3/4-12 3 1/4-12 2 1/4-12 2 3/4-12 3 1/4-12 3 3/4-12 2 3/4-12 3 1/4-12 3 3/4-12 4 1/4-12 4 3/4-12 3 1/4-12 3 3/4-12 4 1/4-12 4 3/4-12 5 1/4-12 - 6-
Thread KK 7/16-20 3/4-16 3/4-16 1-14 3/4-16 1-14 1 1/4-12 1-14 1 1/4-12 1 1/4-12 1 1/4-12 1 1/4-12 1 7/8-12 1 1/4-12 1 7/8-12 2 1/4-12 2 1/2-12 1 7/8-12 2 1/4-12 2 1/2-12 3-12 2 1/4-12 2 1/2-12 3-12 3 1/4-12 3 1/2-12 2 1/2-12 3-12 4 1/4-12 3 1/4-12 5 1/4-12
A 3/4 1 1/8 1 1/8 1 5/8 1 1/8 1 5/8 2 1 5/8 2 2 1/4 2 2 1/4 3 2 1/4 3 3 1/2 3 1/2 3 3 1/2 3 1/2 4 3 1/2 3 1/2 3-12 3 1/4-12 3 1/4-12 3 1/2 4 4 1/2 5 5 1/2
C M M Ø Ø
S
ØC 9/16 15/16 15/16 1 5/16 15/16 1 5/16 1 11/16 1 5/16 1 11/16 1 15/16 1 11/16 1 15/16 2 3/8 1 15/16 2 3/8 2 7/8 3 3/8 2 3/8 2 7/8 3 3/8 3 7/8 2 7/8 3 3/8 3 7/8 4 3/8 4 7/8 3 3/8 3 7/8 4 3/8 4 7/8 5 3/8
S 3/8 1/2 1/2 5/8 1/2 5/8 3/4 5/8 3/4 7/8 3/4 7/8 1 7/8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Douce Hydro
Ports :
Standard specification s: Heavy duty hydraulic c yli nders - 3000 PSI Square head in dustr ial cyli nders Mounting dimensions: NFPA specifications and ANSI/B93.15 – 1981 Straight Thread O-Ring (SAE) Nation al Pipe Thread Fuel (NPTF) Bor e 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
- 7-
NPTF
SAE
1/2
10
1/2
10
1/2
10
3/4
12
3/4
12
3/4
12
1
16
1 1/4
20
1 1/2
24
Douce Hydro
Serie DHI - MS2 – Side lugs Heavy dut y hyd rauli c cylin ders – 3000 PSI
Ø SB M M Ø
H L
T S
XS
SS + STROKE
TS
ZB + STROKE
Bor e 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
LH 1 1/4 1 1/4 1 1/2 1 1/2 1 3/4 1 3/4 1 3/4 2 1/4 2 1/4 2 1/4 2 1/2 2 1/2 2 1/2 3 1/4 3 1/4 3 1/4 3 1/4 3 3/4 3 3/4 3 3/4 3 3/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4
SB 3/8 3/8 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 1 1 1 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2
US
SS 3 7/8 3 7/8 3 5/8 3 5/8 3 3/8 3 3/8 3 3/8 4 1/8 4 1/8 4 1/8 4 4 4 4 1/2 4 1/2 4 1/2 4 1/2 5 1/8 5 1/8 5 1/8 5 1/8 5 3/4 5 3/4 5 3/4 5 3/4 5 3/4 6 3/4 6 3/4 6 3/4 6 3/4 6 3/4 - 8-
TS 3 1/4 3 1/4 4 4 4 7/8 4 7/8 4 7/8 5 7/8 5 7/8 5 7/8 6 3/4 6 3/4 6 3/4 8 1/4 8 1/4 8 1/4 8 1/4 9 3/4 9 3/4 9 3/4 9 3/4 11 1/4 11 1/4 11 1/4 11 1/4 11 1/4 12 1/4 12 1/4 12 1/4 12 1/4 12 1/4
XS 1 3/8 1 3/4 1 7/8 2 1/8 2 1/16 2 5/16 2 9/16 2 5/16 2 9/16 2 11/16 2 3/4 2 7/8 3 1/8 2 7/8 3 1/8 3 1/8 3 1/8 3 3/8 3 3/8 3 3/8 3 3/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8
ZB 6 6 3/8 6 7/16 6 11/16 6 9/16 6 13/16 7 1/16 7 11/16 7 15/16 8 1/16 8 3/16 8 5/16 8 9/16 9 1/16 9 5/16 9 5/16 9 5/16 10 1/2 10 1/2 10 1/2 10 1/2 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4 12 13/16 12 13/16 12 13/16 12 13/16 12 13/16
ST 1/2 1/2 3/4 3/4 1 1 1 1 1 1 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4
US 4 4 5 5 6 1/4 6 1/4 6 1/4 7 1/4 7 1/4 7 1/4 8 1/2 8 1/2 8 1/2 10 10 10 10 12 12 12 12 14 14 14 14 14 15 15 15 15 15
Douce Hydro
Serie DHI - MS4 – Side t apped Heavy duty hydrauli c cyl ind ers – 3000 PSI
M M Ø
M T
TN TM
Bor e 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
XV
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2
TN 3/4 3/4 15/16 15/16 1 5/16 1 5/16 1 5/16 1 1/2 1 1/2 1 1/2 2 1/16 2 1/16 2 1/16 2 15/16 2 15/16 2 15/16 2 15/16 3 5/16 3 5/16 3 5/16 3 5/16 3 3/4 3 3/4 3 3/4 3 3/4 3 3/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4
- 9-
ZJ + STROKE ZB + STROKE
XV 2 2 3/8 2 3/8 2 5/8 2 1/16 2 5/16 2 9/16 2 3/4 3 3 1/8 3 3 1/8 3 3/8 3 1/8 3 3/8 3 3/8 3 1/8 3 1/2 3 1/2 3 1/2 3 1/2 3 13/16 3 13/16 3 13/16 3 13/16 3 13/16 3 15/16 3 15/16 3 15/16 3 15/16 3 15/16
ZJ 2 7/8 2 7/8 2 7/8 2 7/8 3 3 3 3 1/2 3 1/2 3 1/2 3 3/4 3 3/4 3 3/4 4 1/4 4 1/ 4 4 1/4 4 1/4 5 1/8 5 1/8 5 1/8 5 1/8 5 7/8 5 7/8 5 7/8 5 7/8 5 7/8 6 5/8 6 5/8 6 5/8 6 5/8 6 5/8
ZB 6 6 3/8 6 7/16 6 11/16 6 9/16 6 13/16 7 1/16 7 11/16 7 15/16 8 1/16 8 3/16 8 5/16 8 9/16 9 1/16 9 5/16 9 5/16 9 5/16 10 1/2 10 1/2 10 1/2 10 1/2 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4 12 13/16 12 13/16 12 13/16 12 13/16 12 13/16
Douce Hydro
Serie DHI - MX2 – Cap ti e rods ext ended Heavy duty hydrauli c cyl ind ers – 3000 PSI BB
TG
M M Ø
G T
M T
D D Ø
ZJ + STROKE
Bor e 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 - 10 -
TG 1.63 1.63 2.05 2.05 2.55 2.55 2.55 3.25 3.25 3.25 3.82 3.82 3.82 4.95 4.95 4.95 4.95 5.73 5.73 5.73 5.73 6.58 6.58 6.58 6.58 6.58 7.50 7.50 7.50 7.50 7.50
DD 3/8-24 3/8-24 1/2-20 1/2-20 1/2-20 1/2-20 1/2-20 5/8-18 5/8-18 5/8-18 5/8-18 5/8-18 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 1-14 1-14 1-14 1-14 1 1/8-12 1 1/8-12 1 1/8-12 1 1/8-12 1 1/8-12 1 1/4-12 1 1/4-12 1 1/4-12 1 1/4-12 1 1/4-12
BB 1 3/8 1 3/8 1 13/16 1 13/16 1 13/16 1 13/16 1 13/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 3 3/16 3 3/16 3 3/16 3 3/16 3 5/8 3 5/8 3 5/8 3 5/8 4 1/8 4 1/8 4 1/8 4 1/8 4 1/8 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2
TM
ZJ 5 5/8 6 6 6 1/4 6 1/8 6 3/8 6 5/8 7 1/8 7 3/8 7 1/2 7 5/8 7 3/4 8 8 1/4 8 1/2 8 1/2 8 1/2 9 5/8 9 5/8 9 5/8 9 5/8 10 3/4 10 3/4 10 3/4 10 3/4 10 3/4 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4
Douce Hydro
Serie DHI - MX3 – Head tie rods ext ended Heavy dut y hyd rauli c cylin ders – 3000 PSI TG
M T
D D Ø
G T
BB
M M Ø
TM
Bore 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
ZJ + STROKE
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2 - 11 -
TG 1.63 1.63 2.05 2.05 2.55 2.55 2.55 3.25 3.25 3.25 3.82 3.82 3.82 4.95 4.95 4.95 4.95 5.73 5.73 5.73 5.73 6.58 6.58 6.58 6.58 6.58 7.50 7.50 7.50 7.50 7.50
BB 1 3/8 1 3/8 1 13/16 1 13/16 1 13/16 1 13/16 1 13/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 2 5/16 3 3/16 3 3/16 3 3/16 3 3/16 3 5/8 3 5/8 3 5/8 3 5/8 4 1/8 4 1/8 4 1/8 4 1/8 4 1/8 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2
DD 3/8-24 3/8-24 1/2-20 1/2-20 1/2-20 1/2-20 1/2-20 5/8-18 5/8-18 5/8-18 5/8-18 5/8-18 7/8-14 7/8-14 7/8-14 7/8-14 7/8-14 1-14 1-14 1-14 1-14 1 1/8-12 1 1/8-12 1 1/8-12 1 1/8-12 1 1/8-12 1 1/4-12 1 1/4-12 1 1/4-12 1 1/4-12 1 1/4-12
ZJ 5 5/8 6 6 6 1/4 6 1/8 6 3/8 6 5/8 7 1/8 7 3/8 7 1/2 7 5/8 7 3/4 8 8 1/4 8 1/2 8 1/2 8 1/2 9 5/8 9 5/8 9 5/8 9 5/8 10 3/4 10 3/4 10 3/4 10 3/4 10 3/4 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4
Douce Hydro
Serie DHI - MT1 – Head tru nni on m ountin g Heavy duty hydrauli c cyl ind ers – 3000 PSI ZB + STROKE
D T Ø
M T
TL
TM
Bore 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
M M Ø
TL
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
XV
TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2
TL 1 1 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 - 12 -
TD+.000/-.001 1.000 1.000 1.375 1.375 1.375 1.375 1.375 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 2.000 2.000 2.000 2.000 2.500 2.500 2.500 2.500 2.500 3.000 3.000 3.000 3.000 3.000
XV 1 7/8 2 1/4 2 1/4 2 1/2 2 1/4 2 1/2 2 3/4 2 5/8 2 7/8 3 2 7/8 3 3 1/4 3 3 1/4 3 1/4 3 1/4 3 3/8 3 3/8 3 3/8 3 3/8 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 3/4 3 3/4 3 3/4 3 3/4 3 3/4
ZB 6 6 3/8 6 7/16 6 11/16 6 9/16 6 13/16 7 1/16 7 11/16 7 15/16 8 1/16 8 3/16 8 5/16 8 9/16 9 1/16 9 5/16 9 5/16 9 5/16 10 1/2 10 1/2 10 1/2 10 1/2 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4 12 13/16 12 13/16 12 13/16 12 13/16 12 13/16
Douce Hydro
Serie DHI - MT2 – Cap trunnion m ountin g Heavy dut y hyd rauli c cylin ders – 3000 PSI ZB + STROKE
M M M T Ø
M T Ø
TL
TM Bore 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
TL Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
XV + STROKE TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2
TL 1 1 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 - 13 -
TD+.000/-.001 1.000 1.000 1.375 1.375 1.375 1.375 1.375 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 1.750 2.000 2.000 2.000 2.000 2.500 2.500 2.500 2.500 2.500 3.000 3.000 3.000 3.000 3.000
XV 4 7/8 5 1/4 5 1/4 5 1/2 5 3/8 5 5/8 5 7/8 6 1/4 6 1/2 6 5/8 6 3/4 6 7/8 7 1/8 7 3/8 7 5/8 7 5/8 7 5/8 8 3/8 8 3/8 8 3/8 8 3/8 9 3/8 9 3/8 9 3/8 9 3/8 9 3/8 10 1/4 10 1/4 10 1/4 10 1/4 10 1/4
ZB 6 6 3/8 6 7/16 6 11/16 6 9/16 6 13/16 7 1/16 7 11/16 7 15/16 8 1/16 8 3/16 8 5/16 8 9/16 9 1/16 9 5/16 9 5/16 9 5/16 10 1/2 10 1/2 10 1/2 10 1/2 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4 12 13/16 12 13/16 12 13/16 12 13/16 12 13/16
Douce Hydro
Serie DHI - MT4– Center trunnion moun tin g Heavy dut y hyd rauli c cylin ders – 3000 PSI BD
D T Ø
M E W U M Ø
TL
TM
Bor e 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
XV
TL
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
ZB + STROKE TD 1 1 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/4 1 3/4 1 3/4 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 4 4 4 4 4
TL 1 1 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3
TM 3 3 3 1/2 3 1/2 4 4 4 5 5 5 5 1/2 5 1/2 5 1/2 7 7 7 7 8 1/2 8 1/2 8 1/2 8 1/2 9 3/4 9 3/4 9 3/4 9 3/4 9 3/4 11 11 11 11 11 - 14 -
UW 3 7/16 3 7/16 4 1/8 4 1/8 4 7/8 4 7/8 4 7/8 6 6 6 6 7/8 6 7/8 6 7/8 8 1/2 8 1/2 8 1/2 8 1/2 10 3/8 10 3/8 10 3/8 10 3/8 11 5/8 11 5/8 11 5/8 11 5/8 11 5/8 13 11/16 13 11/16 13 11/16 13 11/16 13 11/16
2 2
3 3 3 4 4 4
6 6 6 7 7 7 7 8 8 8 8 8 9 9 9 9 9
E 1/2 1/2 3 3 1/2 1/2 1/2 1/2 1/2 1/2 5 5 5 1/2 1/2 1/2 7 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2
Min.XV 3 7/16 3 13/16 3 15/16 4 3/16 3 15/16 4 3/16 4 7/16 4 11/16 4 15/16 5 1/16 4 15/16 5 1/16 5 5/16 5 1/16 5 5/16 5 5/16 5 5/16 6 1/16 6 1/16 6 1/16 6 1/16 6 9/16 6 9/16 6 9/16 6 9/16 6 9/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16
BD 1 1/4 1 1/4 1 17/32 1 17/32 1 11/16 1 11/16 1 11/16 2 1/32 2 1/32 2 1/32 2 5/8 2 5/8 2 5/8 3 5/16 3 5/16 3 5/16 3 5/16 3 15/16 3 15/16 3 15/16 3 15/16 4 11/16 4 11/16 4 11/16 4 11/16 4 11/16 5 1/4 5 1/4 5 1/4 5 1/4 5 1/4
Douce Hydro
Serie DHI - MP1 – Cap fixed cl evis Heavy dut y hyd rauli c cylin ders – 3000 PSI CW
CB
CW
RADIUS MR
M M Ø
M T
D C
L TM
XC + STROKE
Bor e 1 1/2 2
2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
L 3/4 3/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4
CB 3/4 3/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 2 2 2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 3 3 3 3 3 3 3 3 3 3 - 15 -
CD+.000/-.002 0.501 0.501 0.751 0.751 0.751 0.751 0.751 1.001 1.001 1.001 1.376 1.376 1.376 1.751 1.751 1.751 1.751 2.001 2.001 2.001 2.001 2.501 2.501 2.501 2.501 2.501 3.001 3.001 3.001 3.001 3.001
XC 6 3/8 6 3/4 7 1/4 7 1/2 7 3/8 7 5/8 7 7/8 8 5/8 8 7/8 9 9 3/4 9 7/8 10 1/8 10 1/2 10 3/4 10 3/4 10 3/4 12 1/8 12 1/8 12 1/8 12 1/8 13 3/4 13 3/4 13 3/4 13 3/4 13 3/4 15 15 15 15 15
TM 2 1/2 2 1/2 3 3 3 1/2 3 1/2 3 1/2 4 1/2 4 1/2 4 1/2 5 5 5 6 1/2 6 1/2 6 1/2 7 7 1/2 7 1/2 7 1/2 7 1/2 8 1/2 8 1/2 8 1/2 8 1/2 8 1/2 9 1/2 9 1/2 9 1/2 9 1/2 9 1/2
MR 5/8 5/8 15/16 15/16 15/16 15/16 15/16 1 3/16 1 3/16 1 3/16 1 5/8 1 5/8 1 5/8 2 1/8 2 1/8 2 1/8 2 1/8 2 3/8 2 3/8 2 3/8 2 3/8 2 7/8 2 7/8 2 7/8 2 7/8 2 7/8 3 1/8 3 1/8 3 1/8 3 1/8 3 1/8
Douce Hydro
Serie DHI - ME5 - Head rectangul ar mou nti ng Heavy duty hydrauli c cyl ind ers – 3000 PSI TO
FB 4 HOLES
R
M D M R Ø
WF UO
Bore 1 1/2 2 2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
ZB + STROKE
UO 4 1/4 4 1/4 5 1/8 5 1/8 5 5/8 5 5/8 5 5/8 7 1/8 7 1/8 7 1/8 7 5/8 7 5/8 7 5/8 9 3/4 9 3/4 9 3/4 9 3/4 11 1/4 11 1/4 11 1/4 11 1/4 12 5/8 12 5/8 12 5/8 12 5/8 12 5/8 14 14 14 14 14
R 1.63 1.63 2.05 2.05 2.55 2.55 2.55 3.25 3.25 3.25 3.82 3.82 3.82 4.95 4.95 4.95 4.95 5.73 5.73 5.73 5.73 6.58 6.58 6.58 6.58 6.58 7.50 7.50 7.50 7.50 7.50
TO 3 7/16 3 7/16 4 1/8 4 1/8 4 5/8 4 5/8 4 5/8 5 7/8 5 7/8 5 7/8 6 3/8 6 3/8 6 3/8 8 3/16 8 3/16 8 3/16 8 3/16 9 7/16 9 7/16 9 7/16 9 7/16 10 5/8 10 5/8 10 5/8 10 5/8 10 5/8 11 13/16 11 13/16 11 13/16 11 13/16 11 13/16 - 16 -
FB 3/8 3/8 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4
WF 1 1 3/8 1 3/8 1 5/8 1 3/8 1 5/8 1 7/8 1 5/8 1 7/8 2 1 7/8 2 2 1/4 2 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4
RD 2 1/8 2 1/2 2 1/2 3 2 1/2 3 3 1/2 3 3 1/2 4 3 1/2 4 4 1/2 4 4 1/2 5 1/4 5 3/4 4 1/2 5 1/4 5 3/4 6 1/2 5 1/4 5 3/4 6 1/2 7 7 1/4 5 3/4 6 1/2 7 7 1/4 8 1/4
ZB 6 6 3/8 6 7/16 6 11/16 6 9/16 6 13/16 7 1/16 7 11/16 7 15/16 8 1/16 8 3/16 8 5/16 8 9/16 9 1/16 9 5/16 9 5/16 9 5/16 10 1/2 10 1/2 10 1/2 10 1/2 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4 12 13/16 12 13/16 12 13/16 12 13/16 12 13/16
Douce Hydro
Serie DHI - ME6 - Cap rectangu lar mo unt ing Heavy duty hydrauli c cyl ind ers - 3000 PSI TO
M M Ø
FB 4 HOLES
R
ZJ +STROKE
Bor e 1 1/2 2 1/2
3 1/4
4
5
6
7
8
Rod Ø MM 5/8 1 1 1 3/8 1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
FB 7/16 7/16 9/16 9/16 9/16 9/16 9/16 11/16 11/16 11/16 11/16 11/16 11/16 15/16 15/16 15/16 15/16 1 1/16 1 1/16 1 1/16 1 1/16 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16
UO
R 1.63 1.63 2.05 2.05 2.55 2.55 2.55 3.25 3.25 3.25 3.82 3.82 3.82 4.95 4.95 4.95 4.95 5.73 5.73 5.73 5.73 6.58 6.58 6.58 6.58 6.58 7.50 7.50 7.50 7.50 7.50 - 17 -
TO 3 7/16 3 7/16 4 1/8 4 1/8 4 5/8 4 5/8 4 5/8 5 7/8 5 7/8 5 7/8 6 3/8 6 3/8 6 3/8 8 3/16 8 3/16 8 3/16 8 3/16 9 7/16 9 7/16 9 7/16 9 7/16 10 5/8 10 5/8 10 5/8 10 5/8 10 5/8 11 13/16 11 13/16 11 13/16 11 13/16 11 13/16
UO 4 1/4 4 1/4 5 1/8 5 1/8 5 5/8 5 5/8 5 5/8 7 1/8 7 1/8 7 1/8 7 5/8 7 5/8 7 5/8 9 3/4 9 3/4 9 3/4 9 3/4 11 1/4 11 1/4 11 1/4 11 1/4 12 5/8 12 5/8 12 5/8 12 5/8 12 5/8 14 14 14 14 14
ZJ 5 5/8 6 6 6 1/4 6 1/8 6 3/8 6 5/8 7 1/8 7 3/8 7 1/2 7 5/8 7 3/4 8 8 1/4 8 1/2 8 1/2 8 1/2 9 5/8 9 5/8 9 5/8 9 5/8 10 3/4 10 3/4 10 3/4 10 3/4 10 3/4 11 3/4 11 3/4 11 3/4 11 3/4 11 3/4
Douce Hydro
Hydrauli c cylinders - 3000 PSI Cushionin g Calculation
Cushioning Calculation E : Energy in-lb P : Pressure p.s.i V : Maxi Velocity in/s M : Total mass inertia with piston-rod W/386.1 la : Cushion length in g : Gravity constant 386.1 in/sec² : Tilt angle In order to know the maximum cushionable mass by the hydraulic cylinder, please the following formulas
Horizontal E = 1/2 M V²
Oblique A
EA = 1/2 M V² - M.g.la.sin
B
EB = 1/2 M V² + M.g.la.sin
- 18 -
Douce Hydro
Heavy duty hydrauli c cyl ind ers - 3000 PSI Cushionin g Calculation
Vertical
EA = 1/2 M V² - M.g.la A
B
EB = 1/2 M V² + M.g.la
For hydraulic cylinders with balance valve, please see case horizontal E = 1/2 M V²
- 19 -
Douce Hydro
Bore
Rod
1 1/2
5/8 1
2
1 1 3/8
2 1/2
3 1/4
4
5
6
7
8
1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
Standard specification s: Heavy duty hydraulic c yli nders - 3000 PSI Cylinder Push and Pull Forces
Forces Lbs Push Pull Pull Push Pull Pull Push Pull Pull Pull Push Pull Pull Pull Push Pull Pull Pull Push Pull Pull Pull Pull Push Pull Pull Pull Pull Push Pull Pull Pull Pull Pull Push Pull Pull Pull Pull Pull
Area in² 1.77 1.46 0.98 3.14 2.36 1.66 4.91 4.12 3.42 2.50 8.30 6.81 5.89 5.15 12.57 10.16 9.42 7.66 19.63 16.49 14.73 12.57 10.01 28.27 23.37 21.21 18.65 15.71 38.48 31.42 28.86 25.92 22.58 18.85 50.27 40.64 37.70 34.36 30.63 26.51
50 PSI 88 73 49 157 118 83 245 206 171 125 415 341 295 258 628 508 471 383 982 825 736 628 501 1414 1168 1060 933 785 1924 1571 1443 1296 1129 942 2513 2032 1885 1718 1532 1325
100 PSI 177 146 173 314 236 166 491 412 342 250 830 681 589 515 1257 1016 942 766 1963 1649 1473 1257 1001 2827 2337 2121 100 1571 3848 3142 2886 100 2258 1885 5027 4064 3770 3436 3063 2651
250 PSI 442 365 245 785 589 414 1227 1031 856 626 2074 5349 1473 1289 3142 2540 2356 1914 4909 4123 3682 3142 2503 7069 5841 5301 4663 3927 9621 7854 7216 6480 5645 4712 12566 10161 9425 8590 7658 6627 - 20 -
500 PSI 884 730 491 1571 1178 828 2454 2062 1712 1252 4148 10698 2945 2577 6283 5081 4712 3829 9817 8247 7363 6283 5007 14137 11683 10603 9327 7854 19242 15708 14432 12959 11290 9425 25133 20322 18850 17181 15315 13254
750 PSI 1325 1095 736 2356 1767 1243 3682 3093 2568 1878 6222 16048 4418 3866 9425 7621 7069 5743 14726 38862 11045 9425 7510 21206 17524 15904 13990 11781 28863 23562 21648 19439 16935 14137 37699 30483 28274 25771 22973 19880
1000 PSI 1767 1460 982 3142 2356 1657 4909 4123 3424 2503 8296 21397 5890 5154 12566 10161 9425 7658 19635 51815 14726 12566 10014 28274 23366 21206 18653 15708 38485 31416 28863 25918 22580 18850 50265 40644 37699 34361 30631 26507
1500 PSI 2651 2191 1473 4712 3534 2485 7363 6185 5136 3755 12444 10216 8836 7731 18850 15242 14137 11486 29452 77723 22089 18850 15021 42412 35048 31809 27980 23562 57727 47124 43295 38877 33870 28274 75398 60967 56549 51542 45946 39761
2000 PSI 3534 2921 1963 6283 4712 3313 9817 8247 6848 5007 16592 13622 11781 10308 25133 20322 18850 15315 39270 103631 29452 25133 20028 56549 46731 42412 37306 31416 76969 62832 57727 51836 45160 37699 100531 81289 75398 68722 61261 53014
3000 PSI 5301 4381 2945 9425 7069 4970 14726 12370 10272 7510 24887 20433 17671 15463 37699 30483 28274 22973 58905 155446 44179 37699 30041 84823 70097 63617 55960 47124 115454 94248 86590 77754 67741 56549 150796 121933 113097 103084 91892 79522
Douce Hydro
Standard specification s: Heavy duty hydraulic c yli nders - 3000 PSI Hydraulic cylinder speeds (Inches / Minutes)
Bore
Rod
1 1/2
5/8 1
2
1 1 3/8
2 1/2
3 1/4
4
5
6
7
8
1 1 3/8 1 3/4 1 3/8 1 3/4 2 1 3/4 2 2 1/2 2 2 1/2 3 3 1/2 2 1/2 3 3 1/2 4 3 3 1/2 4 4 1/2 5 3 1/2 4 4 1/2 5 5 1/2
Area in² 1.77 1.46 0.98 3.14 2.36 1.66 4.91 4.12 3.42 2.50 8.30 6.81 5.89 5.15 12.57 10.16 9.42 7.66 19.63 16.49 14.73 12.57 10.01 28.27 23.37 21.21 18.65 15.71 38.48 31.42 28.86 25.92 22.58 18.85 50.27 40.64 37.70 34.36 30.63 26.51
1 131 158 235 74 98 139 47 56 67 92 28 34 39 45 18 23 25 30 12 14 16 18 23 8 10 11 12 15 6 7 8 9 10 12 5 6 6 7 8 9
2 261 316 471 147 196 279 94 112 135 185 56 68 78 90 37 45 49 60 24 28 31 37 46 16 47 22 25 29 12 15 16 18 20 25 9 11 12 13 15 17 - 21 -
3 392 475 706 221 294 418 141 168 202 277 84 102 118 134 55 68 74 90 35 42 47 55 69 25 30 33 37 44 18 22 24 27 31 37 14 17 18 20 23 26
5 654 791 1176 368 490 697 235 337 461 139 170 196 224 92 92 114 123 151 59 70 78 92 115 41 49 54 62 74 30 37 40 45 51 61 23 28 31 34 38 44
10 12 15 20 25 1307 1582 2353 735 882 1103 980 1176 1471 1394 1673 2092 471 565 706 941 1176 560 672 840 1120 1401 675 810 1012 1349 1687 923 1107 1384 1845 2307 278 334 418 557 696 339 407 509 678 848 392 471 588 784 980 448 538 672 896 1120 184 221 276 368 460 227 273 341 455 568 245 294 368 490 613 302 362 452 603 754 118 141 176 235 294 140 168 210 280 350 157 188 235 314 392 184 221 276 368 460 231 277 346 461 577 57 98 148 163 204 99 119 148 198 247 109 131 163 218 272 124 149 186 248 310 147 176 221 294 368 128 72 90 120 150 74 88 110 147 184 80 96 120 160 200 86 107 134 178 223 102 123 153 205 256 123 147 184 245 306 46 55 69 92 115 57 68 85 114 142 61 74 92 123 153 67 81 101 134 168 75 90 113 151 189 88 105 131 174 218
Douce Hydro
How to or der DHI - hydraulic cyli nders Serie DHI – Heavy du ty hydraulic c yli nders 3000 PSI
Example of designation: Serie DHI – 4 / 2 – MT4 – A – E – G – I – N – O – 10 – S Choice 4 Choice
Bore diameter
2 Choice
Rod diameter
X
Choice X
A B C
Choice D X E F Choice X G H Choice X I J Choice K L M X N Choice X O P Choice 10 Choice Q X R Choice X S T
Style Mountin g Device MS2 Side lugs MS4 Side tapped MX2 Cap tie rods extended MX3 Head tie rods extended MT1 Head trunnion MT2 Cap trunnion MT4 Center trunnion MP1 Cap fixed clevis ME5 Head rectangular Working Conditions Normal temperature –10° F to 165° F High temperature up to 330° F Fluid difficulty inflamable Piston rod coating Keradouce® coating Hard chrome plated Nickel-Chrome plated Pistons seals Double acting seal Compound seal Rod seals Single lip seal Compound seal Cushioning Without cushioning With front cushion With rear cushion With front and rear cushion Ports SAE NPTF Stroke inch Brace ring for long stroke With brace ring Without brace ring Rod End Thread CC Thread KK - 22 -
Douce Hydro
For more infor mation, please contact:
EUROPE, ASIA, AFRICA, SOUTH AMERICA, OCEANIA: Ms. Anne-Frédérique LEROY – Export Sales Manager Tel : + 33 / (0)3 22 74 31 08 Fax : + 33 / (0)3 22 74 78 43 E-mail :
[email protected]
NORTH AMERICA : Mr. Franck VANDENBULKE – General & Engineering Manager Mrs. Mathilde GILLET – Sales Manager Tel : + 1 / 586-566-4725 Fax: + 1 / 212-918-1611 E-mail:
[email protected] [email protected]
FRANCE : Sales Department Tel : + 33 / (0)3 22 74 31 00 Fax : + 33 / (0)3.22.74.78.43 E-mail :
[email protected]
**********************************************
Douce Hydro: We stand behind each cylinder we manufacture. **********************************************
- 23 -
