Home
Add Document
Sign In
Register
MTK Catcher and Memory Dump Procedure
Home
MTK Catcher and Memory Dump Procedure
MTK catcher processFull description...
Author:
suniltholia
27 downloads
133 Views
219KB Size
Report
DOWNLOAD .PDF
Recommend Documents
Memory Dump Analysis Anthology, Volume 2.pdf
CFGMML Dump and Processing
Criminal Procedure - Memory Aide (San Beda)
CRIMINAL PROCEDURE - MEMORY AIDE (SAN BEDA).pdf
Music and Memory
MusicDescripción completa
Music and Memory
MusicFull description
Pointers and Memory
this is abt ptr's and about memory actions
Criminal Procedure - Memory Aide (San Beda)
CRIMINAL PROCEDURE - MEMORY AIDE (SAN BEDA).pdfFull description
Bus and Memory Transfers
Sex Catcher
Ebook sexcatcherFull description
Slug Catcher
Descripción completa
Imsi Catcher
Full description
Slug Catcher
MS201 Dump
MsFull description
Mind And Memory Training
Music and Memory
Music
Music and Memory
MusicFull description
MS201 Dump
MsDescripción completa
isi dump
HIDROLIK DUMP TRUCK HINO 500 FM 320 TIDeskripsi lengkap
DUMP TRUK
ka
Slug Catcher Sizing
Descrição completa
Short Dump
Descripción: Short Dump
ABAP Dump
ABAP DumpFull description
cbr mtk
CbrFull description
Pickling and Passivation Procedure
SSDescripción completa
MTK Log Catcher Procedure
Steps for Catch The Logs with USB Cable: Step 1
Go to the Engineering mode of the handset. Like for
Q50 *#84666364*# X265 **#446633#
Step 2
There are some options select Device Set UART UART Setting.
Step 3
Go to the option TST-PS Config.
Step 4
There are some options like: None, UART 1, UART 2, UART 3 and USB Port.
Step 5
Select the option USB port and scroll down to the Baud-Rate and c hange it to according to the handset. handset. Like for for Q50: 921600 X265: 460800
Step 6
Now go to the option TST-L1 Config.
Step 7
Follow the step 4 and 5.
Step 8
Now press the Ok key. There will a message on the display ‘Done. Power off in 3 sec.
Step 9
Now will get switched off.
Step 10
Open the Catcher log file.
Step 11
Click on Config Set Database Path.
Step 12
Click
on that icon and select the path of the software which is present in
handset. Step 13
Select the src file and press ok.
Step 14
Now click on the
icon and then
there will a window.
Step 15
Select the particular port as shown in system device manager.
Step 16
Now click on
Step 17
You can select filers as well by click on that
that icon and it will start taking the logs. icon.
Steps for Catch The Logs with Download Cable:
Step 1
Go to the Engineering mode of the handset. a.
Q50 *#84666364*#
Like for 1.
X265 **#446633#
Step 2
There are some options select Device Set UART UART Setting.
Step 3
Go to the option TST-PS Config.
Step 4
There are some options like: None, UART 1, UART 2, UART 3 and USB Port.
Step 5
Select the option UART 1 and scroll down to the Baud-Rate and c hange it to according to
the handset. Like for
Q50 : 921600 a.
X265: 460800
Step 6
Now go to the option TST-L1 Config.
Step 7
Follow the step 4 and 5.
Step 8
Now press the Ok key. There will a message on the display ‘Done. Power off in 3 sec.
Step 9
Now will get switched off.
Step 10
Open the Catcher log file.
Step 11
Click on Config Set Database Path.
Step 12
Click
on that icon and select the path of the software which is present in
handset. Step 13
Select the src file and press ok.
Step 14
Now click on the
icon and then
there will a window.
Step 15
Select the particular port as shown in system device manager.
Step 16
Now click on
Step 17
You can select filers as well by click on that
that icon and it will start taking the logs. icon.
How to Save the Logs:
A. First connect the handset with catcher and select the particular filter and perform the steps. B. After that click on
that icon. It will disconnect and handset from catcher.
C. Now click on File and select the option Save Log As... Option. D. The logs will save at your selected location.
How to take Logs & Memory Dump for a crash issue: Step 1
Go to the Engineering mode of the handset. Q50 *#84666364*#
Like for
X265 **#446633# Step 2
There are some options select Device Set UART UART Setting.
Step 3
Go to the option TST-PS Config.
Step 4
There are some options like: None, UART 1, UART 2, UART 3 and USB Port.
Step 5
Select the option USB port and scroll down to the Baud-Rate and c hange it to according
to the handset. Like for Q50 : 921600 X265: 460800 Step 6
Now go to the option TST-L1 Config.
Step 7
Follow the step 4 and 5.
Step 8
Now press the Ok key. There will a message on the display ‘Done. Power off in 3 sec.
Step 9
Now will get switched off.
Step 10
Now switch on the phone and go to the engineering mode again.
Step 11
Go to the Misc.>Memory Dump, turn it on.
Step 12
Now connect the handset with catcher via USB or Download cable.
Step 13
Select the respective filters as directed.
Step 14
Reproduce the issue till the handset gets crashed.
Note: When handset gets crashed it will stops in a white screen and logs will be stop in catcher.
Step 15
Now press the
with the cable.
disconnect icon and save the logs. Do not disconnect the handset
Step 16
Now press the
connect icon and go to the Advanced>Memory Dump option. You
will get below window.
Step 17
Set the path to save the Dump by clicking on
Step 18
Now click on Memory dump and it will start downloading the dump when it will
complete, you will get the finished pop up.
icon.
×
Report "MTK Catcher and Memory Dump Procedure"
Your name
Email
Reason
-Select Reason-
Pornographic
Defamatory
Illegal/Unlawful
Spam
Other Terms Of Service Violation
File a copyright complaint
Description
×
Sign In
Email
Password
Remember me
Forgot password?
Sign In
Our partners will collect data and use cookies for ad personalization and measurement.
Learn how we and our ad partner Google, collect and use data
.
Agree & close