Quidway AR 19-1X Router Hardware Configuration Manual _Overseas Version_V1

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version) Product Version Version

Huawei Huawei Technolo gies Co., Ltd.

SECRET

Confidentiality Level Level

8048 V300R002 Product Name: Name: Quidw ay AR 19-1X 19-1X Series Router

Secret Total 53 pages

Hard Hardware ware Con Config fig uration ur ation Manu Manual al of Quid way AR 19-1 19-1X X Seri Series es Routers (Overseas (Overseas Versio Versio n) V1.00 (For internal use only)

Huawei Huawei Techno Techno log ies Co., Ltd. Al l Ri gh ts Reserved Reser ved

2009-03-05

Huawei Confidential

Page 1 of 53

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version)

SECRET

Compiling Princi ples of the Configuration Manual Manual : Make sure that the manual compiled according to the BOM list of the products. First, make a product list, and then detail the items in terms of configuration principles, configuration algorithms, and configuration precautions. The items available and unavailable, existing constraints, related product compatibility and requirements, and precautions for the marketing departments (highlighted in red) must be specified according to the actual R&D status, without exaggeration and "to-be-offered" advertisement. For any revisions in the documentation, identify the document version in the revision record, and clarify the additions, deletions and modifications compared with the last version. Guideline of the Configuration Manual template: This is the uniform template at the company level. It is allowed to make proper reconstruction and modification according to the characteristics characteristics of the products and the writing principles.

2009-03-05

Huawei Confidential

Page 2 of 53


SECRET

Compiling Princi ples of the Configuration Manual Manual : Make sure that the manual compiled according to the BOM list of the products. First, make a product list, and then detail the items in terms of configuration principles, configuration algorithms, and configuration precautions. The items available and unavailable, existing constraints, related product compatibility and requirements, and precautions for the marketing departments (highlighted in red) must be specified according to the actual R&D status, without exaggeration and "to-be-offered" advertisement. For any revisions in the documentation, identify the document version in the revision record, and clarify the additions, deletions and modifications compared with the last version. Guideline of the Configuration Manual template: This is the uniform template at the company level. It is allowed to make proper reconstruction and modification according to the characteristics characteristics of the products and the writing principles.

2009-03-05

Huawei Confidential

Page 2 of 53


SECRET

Revisi vi sion on Recor Record d Date

Revision

2007-11-20 -20

1.00

2008-02-22

1.01

2009-03-05

Descriptio n Version 1, including the modules supported in phase one Modify the first version. Adopt SIC-FEF and SIC-GEC SIC-GEC transceiver transceiver from purchasing code. Delete the selection of USB flash disks.

Huawei Confidential

Written by Zhang Huibin Zhang Gang

Page 3 of 53


SECRET

Table of Contents 1 Overview of AR 19-1X Series Routers .............................................................................. 10 1.1 Introduction to Products ........................................................................... ....................................................................................... ............ 10 1.2 Network ing of t he Quidw ay AR 19-1 19-1X X Series Series .................................................... 10 1.3 App earance of the Qui dway AR 19-1X 19-1X Series ................................................... 10 1.3.1 1.3.1 Appearance of Quidw ay AR 19-10 19-10 Router ................................................ 11 1.3.2 1.3.2 Appearance o f Qui dway AR 19-10-W 19-10-W Router ........................................... 11 ............................................. 12 1.3.3 1.3.3 Appearance o f Qui dway AR 19-13-I 19-13-I Router .............................................

1.3.4 1.3.4 Appearance o f Qui dway A R 19-1319-13-IW IW Router ......................................... 13 1.3.5 1.3.5 Appearance o f Qui dway AR 19-15-I 19-15-I Router ............................................. ............................................. 13 1.3.6 1.3.6 Appearance o f Qui dway A R 19-1519-15-IW IW Router ......................................... 14 1.4 1.4 Basic Configur ation of the Quidw ay AR 19-1 19-1X X Series Series ..................................... 15 1.4.1 1.4.1 System Descri pti on Table of the Qui dway AR 19-1X 19-1X Series ................ 15 1.4. 1.4.2 2 Basic Confi guratio n Descripti on o f th e Quidway AR 19-1 19-1X X Series Series .... 15 1.5 1.5 Introdu ction to t he Host o f th e Quidway AR 19-1 19-1X X Series Series.............................. 16 1.6 Introduction to the Interface Modules Supported by the Quidway AR 19-1X Series ........................................................................ .............................................................................................................................. ...................................................... 17 1.6. 1.6.1 1 Interface Modules Currentl y Suppo rted................................................... 17 1.6. 1.6.2 2 Descrip Descrip tion of Interface Module Locatio n ............................................... 19 1.7 1.7 Overall Overall Configur ation Principl e of the Quidw ay AR 19-1 19-1X X Series Series ................. 19 1.8 1.8 Overall Overall Conf iguratio n Descripti on of t he Quidway AR 19-1X 19-1X Series Series ............ 20 2 Host Configuration Description of the Quidway AR 19-1X Series................................... 21 3 Description of Storage Media Expansion for the Quidway AR 19-1X Series ................. 23 3.1 Selection of USB Flash Memory .......................................................................... 23 4 Configuration of SIC Interface Module for the Quidway AR 19-1X Series ..................... 24 4.1 Confi gur ation of t he RT-SI RT-SIC-1 C-1GEC GEC Interf ace Module....................................... 24 4.2 Configuration of the RT-SIC-4FSW Module and the RT-SIC-9FSW Interface Module ...................................................................... ............................................................................................................................ ...................................................... 26 4.3 Confi gur ation of t he RT-SI RT-SIC-1 C-1FEA FEA Interf Interf ace Module ....................................... 27 4.4 Configuration of the RT-SIC-1SAE Interface Module ....................................... 28 4.5 Configuration of the RT-SIC-1E1-F Module and the RT-SIC-EPRI Interface Module ...................................................................... ............................................................................................................................ ...................................................... 29 4.6 Confi gur ation of the RT-SI RT-SIC-1 C-1FXSFXS-V2 V2 and RT-SI RT-SIC-2 C-2FXS FXS-V2 -V2 Interface Modul e ......................................................................................................................................... ......................................................................... .................................................................. 31 4.7 Configuration of the RT-SIC-1FXO-V2 Module and the RT-SIC-2FXO-V2 Module ...................................................................... ............................................................................................................................ ...................................................... 32 4.8 Configuration of the RT-SIC-1ADSL-I Interface Module .................................. 33 4.9 Configuration of the RT-SIC-1ADSL Interface Module..................................... 33 4.10 Configuration of the RT-SIC-1AM-V3 Interface Module ................................. 34 4.11 4.11 Config urati on of t he RT-SI RT-SIC-1 C-1VE1 VE1 Inter Inter face Modu le...................................... 34 4.12 4.12 Config urati on o f th e RT-SI RT-SIC-1 C-1BS-V2 BS-V2 Interf ace Module ................................. 36 4.13 Configuration of the RT-SIC-1BU-V2 Interface Module ................................. 37 4.14 4.14 Confi gur atio n o f t he RT-SI RT-SIC-1 C-1BSV BSV Modul e and t he RT-SI RT-SICC-2BSV 2BSV Modul e 37 2009-03-05

Huawei Confidential

Page 4 of 53


SECRET

4.15 4.15 Config urati on o f th e RT-SI RT-SIC-1 C-1FEF FEF Interf ace Module...................................... 38 4.16 4.16 Confi gur ation of the RT-SIC RT-SIC-2F -2FXS1 XS1FXO FXO Interf Interf ace Modul e ........................... 40 5 Configuration Description for External Cable Set of the Quidway AR 19-1X Series ..... 41 6 Configuration of External Cable Se t of the Quidway AR 19-1X Series........................... 46 7 Configuration Examples .............................................................................. ..................................................................................................... ....................... 48 8 Configuration FAQ ........................................................................... .............................................................................................................. ................................... 49 8.1 Although the routers have standard configurations without the need of on-site survey, in some of the bundled sales contracts, survey report is needed and some special requirements on the cable length are specified, especially the E1 cable. How to handle it? .................................................................................... ..................................................................................................................... ................................. 49 8.2 The users complain that there is not any document in the package of the newly purchased E1 voice module, so they do not know how to use it. ............................... 50 8.3 The optical fibers that the marketing personnel promised to the customers are too long that we cannot find them in the configuration list. How can we do with it? ........ 50 9 Appendix: Slot Restriction for Host Interface Card ........................................................... 52 9.1 SIC/D SIC/DSIC SIC Con Con fig urati on Table .............................................................................. 52 9.2 VPM Card Confi gur ation Table ............................................................................ .............................................................................. 53

2009-03-05

Huawei Confidential

Page 5 of 53


SECRET

Table of Figure Descri ptio ns Figure 1 Front panel of the Quidway AR 19-10 router ................................................. 11 Figure 2 Back panel of the Quidway AR 19-10 router .................................................. 11 Figure 3 Front panel of Quidway AR 19-10-W router ................................................... 11 Figure 4 Back panel of the Quidway AR 19-10-W router ............................................ 12 Figure 5 Front panel of the Quidway AR 19-13-I router .............................................. 12 Figure 6 Back panel of the Quidway AR 19-13-I router .............................................. 12 Figure 7 Front panel of the Quidway AR 19-13-IW router .......................................... 13 Figure 8 Back panel of the Quidway AR 19-13-IW ...................................................... 13 Figure 9 Front panel of Quidway AR 19-15-I router .................................................... 14 Figure 10 Back panel of the Quidway AR 19-15-I router ............................................ 14 Figur e 11 Front panel of the Quidway AR 19-15-IW router ......................................... 14 Figure 12 Back panel of the Quidway AR 19-15-IW router ......................................... 15 Figure 13 Extension of 75Ω E1 cable ........................................................................... 49 Figure 14 Extension of 120Ω E1 cable ......................................................................... 50

2009-03-05

Huawei Confidential

Page 6 of 53


SECRET

Table of Table Descr iptio ns Table 1

System description table of the Quidway AR 19-1X series ....................... 15

Table 2 series

System description table of the main board of the Quidway AR 19-1X 15

Table 3

Quidway AR 19-1X series router code ........................................................ 16

Table 4

Quidway AR 19-1X series host code........................................................... 16

Table 5

SIC module table of the Quidway AR 19-1X series ................................... 17

Table 6

Built-in module table of the Quidway AR 19-1X series .............................. 18

Table 7

Host code of the Quidway AR 19-1X series ............................................... 21

Table 8

Configuration list of the RT-SIC-1GEC module .......................................... 24

Table 9

Configuration list of the RT-SIC-1GEC SFP module .................................. 25

Table 10 Configuration list of the single-mode cables for the RT-SIC-1GEC module 26 Table 11 Configuration list of the multi-mode cables for the RT-SIC-1GEC module 26 Table 12 The configuration list of the RT-SIC-4FSW module and the RT-SIC-9FSW module 27 Table 13 Configuration list of the RT-SIC-1FEA module ........................................... 28 Table 14 Configuration list of the RT-SIC-1SAE module ........................................... 28 Table 15 Configuration List of Optional Cables for the RT-SIC-1SAE Module ........ 29 Table 16 Configuration of the RT-SIC-1E1-F module and the RT-SIC-EPRI module 30 Table 17 Cable Configuration of the RT-SIC-1E1-F module and the RT-SIC-EPRI 30 module Table 18 Configuration list of RT-SIC-1FXS-V2 and RT-SIC-2FXS-V2 ................... 32 Table 19 Configuration list of RT-SIC-1FXO-V2 and RT-SIC-2FXO-V2 .................. 32 Table 20 Configuration list of the RT-SIC-1ADSL-I module ...................................... 33 Table 21 Configuration list of the RT-SIC-1ADSL module ........................................ 33 Table 22 List of the Optional Accessories for the RT-SIC-1ADSL............................ 34 Table 23 Configuration list of the RT-SIC-1AM-V3 module....................................... 34 Table 24 Configuration list of the R T-SIC-1VE1 module .......................................... 35 Table 25 Cable configuration list of the R T-SIC-1VE1 module ................................ 35 Table 26 Configuration list of the RT-SIC-1BS-V2 module ....................................... 37 Table 27 Configuration list of the RT-SIC-1BU-V2 module ....................................... 37 Table 28 Configuration list of RT-SIC-1BSV and RT-SIC-2BSV ............................... 38 Table 29 Configuration list of the RT-SIC-1FEF module ........................................... 38 Table 30 Configuration list of the RT-SIC-1FEF SFP optical module ....................... 39 Table 31 Configuration list of the single-mode cables for the RT-SIC-1FEF module 40 Table 32 Configuration list of the multi-mode cables for the RT-SIC-1FEF module 40 Table 33 Configuration list of the RT-SIC-2FXS1FXO module ................................. 40 Table 34 Configuration list for external cable set of the Quidway AR 19-1X series 41 Table 35 Fiber optical suite of the Quidway AR 19-1X series................................... 46 2009-03-05

Huawei Confidential

Page 7 of 53


SECRET

Table 36 SIC/DSIC configuration table of the Quidway AR 19-1X series ................ 52 Table 37 VPM configuration table of the Quidway AR 19-1X series ........................ 53

2009-03-05

Huawei Confidential

Page 8 of 53


SECRET

Hardware Config uration Manual of Quidw ay AR 19-1X Series Routers (Internatio nal Version) V1.01 Keywords: Hardware Configuration Manual of Quidway AR 19-1X Series Routers Hardware (International Version) Ab st rac t: This document describes the configuration of Quidway AR 19-1X series routers (international version) to facilitate product configuration and ensure correct networking and delivery. Document Management: This document was prepared by the 8040 PDT unit based on the current release of the product. It will be updated based on the builds of the product. The R&D, Marketing, Technical Support functions have participated in the review of the document. The first draft of the document will be available at the application stage of the pilot office. It will be updated regularly in the future (at least once in a quarter, identified with the version number and the release date of the document). This document is included in the configuration management. Reviewed and approved by related units, the document will be archived in the R&D Documentation Center. At the same time, it will be released through the database of the "Marketing and Technical Documents Platform". The contact persons of related units in charge of documentation should keep the document secret and should not distribute it without proper permission. Document Usage: This document is supposed to be used in connection with Quidway AR 19-1X Series Router Overview, mainly for guiding the configuration and delivery activities of the marketing and production functions. It is a secret document only for internal use, and will not be distributed to the regional offices directly. The marketing function will prepare the Product Sales Guide based on this document, keep it updated dynamically, and distribute it to the regional offices. This document should not be released to the customers or disclosed to Huawei’s competitors, otherwise related departments and individuals shall be held responsible. The opinions and suggestions deriving from the use of the document can be delivered through the Marketing and Technical Documents Platform in a timely fashion to facilitate future revision by the 8040 PDT unit. An no un cem ent: This document has responded to the principle of Company-Level Uniform Product Naming of Routers, and has it reflected in the text. The names of some of the modules in the PDM or the corresponding finished boards or components still carry the attributes of the previous naming rules, however. Before the data center makes unified revisions to it, if there are inconsistencies between this document and the related descriptions in the PDM, the codes of the corresponding parts in this document shall be based on.

2009-03-05

Huawei Confidential

Page 9 of 53


1

SECRET

Overview o f A R 19-1X Series Routers

1.1

Introduction to Products

Quidway AR 19-1X series routers (hereafter referred to as the Quidway AR 19-1X series) belong to Quidway AR 1900 series routers family. The Quidway AR 1900/2900/4900 series router is a new generation of the AR series router of Huawei after Huawei has successfully developed the R series and the AR 18/28/46 series router. The routers in this series have incorporated all-round upgrades and enhancements based on the hardware and software of the original router products, having greatly improved the cost effectiveness of the router products and their ability to integrate multiple services. This series is also divided into three series: AR 1900, AR 2900, and AR 4900, moving up one after another along the value chain. AR 1900 and AR 2900 series routers can be used as edge access of major networks and networks of the operators, as the core routers for branch offices or small businesses. AR 4900 series routers can be used as the core routers of the networks of large and medium-sized enterprises, or as the edge or converged access equipment for major networks or networks of the operators. Quidway AR 1900/2900/4900 series routers use the network operating system platform of Huawei (VRP V5). The network operating system fully supports software features of the existing R series and AR 18/28/46 series products, providing backup solutions based on the backup center technology and VRRP, MPLS L3/L2 VPN, ADSL access, PPPoE Server/Client, IP multi-cast, and Quality of Service (QoS). At the same time, the VRP V5 operating system also fully supports IPv6 protocol and various other features. In addition, the hardware and software of AR 1900/2900/4900 series routers meet international standards, which ensures the interconnection with products from other vendors at different levels and can protect the existing investment of the users to the maximum extent possible. AR 1900 series routers are the low-end products of the new generation of the AR series routers. They are inferior to AR 2900/4900 series products in terms of the transmission performance, the encryption performance, and the interface density, mainly targeting SMBs, Internet cafes, government organizations, and branch offices in special industries. AR 1900 series routers support a wide range of optional interfacing modules, offering the flexibility and scalability in networking. This document describes configurations of Quidway AR 19-10, Quidway AR 19-10-W, Quidway AR 19-13-I, Quidway AR 19-13-IW, Quidway AR 19-15-I, and Quidway AR 19-15-IW. Quidway AR 19-10, Quidway AR 19-10-W, Quidway AR 19-13-I, Quidway AR 19-13-IW, Quidway AR 19-15-I, and Quidway AR 19-15-IW routers are boxes with 1U height. Quidway AR 19-10, Quidway AR 19-10-W, Quidway AR 19-13-I, Quidway AR 19-13-IW, Quidway AR 19-15-I, and Quidway AR 19-15-IW are the same in physical dimension, and those ended with "W" support WLAN function. Based on Quidway AR 19-10, Quidway AR 19-13-I is added with a 4-line G.SHDSL upstream interface and Quidway AR 19-15-I is added with one ADSL2+ upstream interface. Quidway AR19-1X has only one SIC/DSIC slot, so one SIC/DSIC can be configured on one router. The interface module available for Quidway AR 19-1X can also be used in the SIC slot of AR 19-61, AR29-01/21/41, and AR49-45 routers.

1.2

Netwo rki ng o f t he Quidw ay AR 19-1X Series

Refer to Product Overview of Quidway AR 19-1X Series Routers .

1.3 Ap pear anc e of th e Qui dw ay AR 19-1X Seri es Quidway AR 19-10, Quidway AR 19-10-W, Quidway AR 19-13-I, Quidway AR 19-13-IW, Quidway AR 19-15-I, and Quidway AR 19-15-IW are the same in physical dimensions, and those ended with "W" support WLAN function. Based on Quidway AR 19-10, Quidway AR 2009-03-05

Huawei Confidential

Page 10 of 53


SECRET

19-13-I is added with a 4-line G.SHDSL upstream interface and Quidway AR 19-15-I is added with one ADSL2+ upstream interface.

1.3.1

App earance of Quid way AR 19-10 Router

The Quidway AR 19-10 router is in 1U height. One USB interface, four LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100M Ethernet interface, one SIC/DSIC slot, four fixed 10/100M Ethernet interfaces and one CON/AUX interface are on the back panel. The appearance of the Quidway AR 19-10 router is shown below. 1.

Front panel of the Quidway AR 19-10 router Figure 1 Front panel of the Quidway AR 19-10 router

2.

Back Panel of the Quidway AR 19-10 router Figure 2 Back panel of the Quidway AR 19-10 router

1.3.2

App earance of Quidway AR 19-10-W Router

The Quidway AR 19-10-W router is in 1U height. One USB interface, four LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100M Ethernet interface, one SIC/DSIC slot, four fixed 10/100M Ethernet interfaces, one CON/AUX interface and a pair of antennas for the network card of WLAN are on the back panel. One built-in mini PCI plug-in card of WLAN is in the Quidway AR 19-10-W router. The appearance of the Quidway AR 19-10-W router is shown below. 1.

Front panel of the Quidway AR 19-10-W router Figure 3 Front panel of Quidway AR 19-10-W router

2009-03-05

Huawei Confidential

Page 11 of 53

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version) 2.

SECRET

Back panel of the Quidway AR 19-10-W router Figure 4 Back panel of the Quidway AR 19-10-W router

1.3.3

App earance of Quidway AR 19-13-I Router

The Quidway AR 19-13-I router is in 1U height. One USB interface, seven LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100 M Ethernet interface, one SIC/DSIC slot, one 4-line G.SHDSL upstream interface, four fixed 10/100 M Ethernet interfaces, one ISDN BRI S/T interface and one CON/AUX interface are on the back panel. The appearance of the Quidway AR 19-13-I router is shown below. 1.

Front panel of the Quidway AR 19-13-I router Figure 5 Front panel of the Quidway AR 19-13-I router

2.

Back panel of the Quidway AR 19-13-I router Figure 6 Back panel of the Quidway AR 19-13-I router

2009-03-05

Huawei Confidential

Page 12 of 53


1.3.4

SECRET

App earance of Quidway AR 19-13-IW Router

The Quidway AR 19-13-IW router is in 1U height. One USB interface, seven LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100 M Ethernet interface, one SIC/DSIC slot, one 4-line G.SHDSL upstream interface, four fixed 10/100 M Ethernet interfaces, one ISDN BRI S/T interface, one CON/AUX interface and a pair of antennas for the network card of WLAN are on the back panel. One built-in mini PCI plug-in card of WLAN in Quidway AR 19-10-W router and one VPM stick interface for upgrading. The appearance of the Quidway AR 19-13-IW router is shown below. 1.

Front panel of the Quidway AR 19-13-IW router Figure 7 Front panel of the Quidway AR 19-13-IW router

2.

Back panel of the Quidway AR 19-13-IW router Figure 8 Back panel of the Quidway AR 19-13-IW

1.3.5

App earance of Quidway AR 19-15-I Router

The Quidway AR 19-15-I router is in 1U height. One USB interface, seven LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100 M Ethernet interface, one SIC/DSIC slot, one ADSL2+ over POTS upstream interface, four fixed 10/100 M Ethernet interfaces, one ISDN BRI S/T interface, one CON/AUX interface are on the back panel. The appearance of the Quidway AR 19-15-I router is shown below. 2009-03-05

Huawei Confidential

Page 13 of 53

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version) 1.

SECRET

Front panel of the Quidway AR 19-15-I router Figure 9 Front panel of Quidway AR 19-15-I router

2.

Back panel of the Quidway AR 19-15-I router Figure 10 Back panel of the Quidway AR 19-15-I router

1.3.6

App earance of Quidway AR 19-15-IW Router

The Quidway AR 19-15-IW router is in 1U height. One USB interface, four LEDs, one reset switch and one AC power interface are on the front panel. One fixed 10/100 M Ethernet interface, one SIC/DSIC slot, one ADSL2+ over POTS upstream interface, four fixed 10/100 M Ethernet interfaces, one ISDN BRI S/T interface, one CON/AUX interface and a pair of antennas for the network card of WLAN are on the back panel. One built-in mini PCI plug-in card of WLAN in Quidway AR 19-15-IW router and one VPM insertion piece interface for upgrading. The appearance of the Quidway AR 19-15-I router is shown below.

Front panel of the Quidway AR 19-15-IW router Figure 11 Front panel of the Quidway AR 19-15-IW router

Back panel of Quidway AR 19-15-IW router

2009-03-05

Huawei Confidential

Page 14 of 53


SECRET

Figure 12 Back panel of the Quidway AR 19-15-IW router

1.4

Basic Conf igur ation o f th e Quidw ay AR 19-1X Series

1.4.1

System Descri ption Table of the Quidway AR 19-1X Series

The Quidway AR 19-1X series in the Quidway AR 1900series shares one PCB, and the basic configuration is shown below. Table 1

System description table of the Quidway AR 19-1X series Item

Description

Slot 1 SIC/DSIC Physical dimensions (W × 300.0 mm × 240.0 mm × 49.1mm (including the plastic foot but excluding the rack-mounting ear) D ×H) Weight 2.5 kg Input voltage AC: 100V–240V (+/-10%) 50/60 Hz Maximum power Working ambient temperature Environment RH

Table 2

25 W 0 °C–45 °C 5%–90% (non-condensing)

System description table of the main board of the Quidway AR 19-1X series Item

Fixed interface

Processor Flash Memory

1.4.2

Description One fixed FE One CON/AUX interface Four fixed FE interfaces One USB interface PowerPC 333 MHz 16 MB 256 MB

Basic Configu ration Descri pti on of the Quidway AR 19-1X Series

Quidway AR 1910 (AC) RT-AR1910-AC-OVS 2009-03-05

Basic model

Huawei Confidential

Model

Number

to

the

outside

Page 15 of 53


SECRET

Quidway AR 1910 (AC) RT-AR1910-AC-OVS-W

Wireless model

Model

Number

to

the

outside

Quidway AR 1913 (AC) RT-AR1913-AC-OVS-I

Basic model

Model

Number

to

the

outside

Quidway AR 1913 (AC) RT-AR1913-AC-OVS-IW

Wireless model

Model

Number

to

the

outside

Quidway AR 1915 (AC) RT-AR1915-AC-OVS-I

Basic model

Model

Number

to

the

outside

Quidway AR 1915 (AC) RT-AR1915-AC-OVS-IW

Wireless model

Model

Number

to

the

outside

Each router host possesses an independent 0235 code. The hosts of Quidway AR 19-10, Quidway AR 19-10-W, Quidway AR 19-13-I, Quidway AR 19-13-IW, Quidway AR 19-15-I, and Quidway AR 19-15-IW share a general top-level code 0105, as shown in the following table. Table 3

No. 1

1.5

Quidway AR 19-1X series router code Code 0105A09M

Descripti on Quidway AR 19-1X Series Routers, International Version

Introd uct ion to t he Host of t he Quidway AR 19-1X Series

The Quidway AR 19-1X Series includes six hosts, which all use the AC power supply. The related codes and descriptions are summarized in the following table. Table 4

Quidway AR 19-1X series host code

0105A09M item description: Routers-International Version No.

2009-03-05

Datacom

Device-Quidway

Code

Descripti on

1

0235A34D

2

0235A34E

3

0235A34F

4

0235A34G

5

0235A34H

6

0235A34J

Assembly-Quidway AR 19-10-RTVZ31910-Router Host (AC)-International Version Assembly-Quidway AR 19-10-RTVZ31910-Router Host (AC)-WLAN-supported-International Version Assembly-Quidway AR 19-13-RTVZ31913I-Router Host (AC)-International Version Assembly-Quidway AR 19-13-RTVZ31913IW –Router Host (AC)-WALN-supported-International Version Assembly-Quidway AR 19-15-RTVZ31915I-Router Host (AC)-International Version Assembly-Quidway AR 19-15-RTVZ31915IW-Router Host (AC)-WALN-supported-International Version

Huawei Confidential

AR

Quantity

19-1X

Series

Remarks

At customers' option At customers' option

Optional


Optional


Optional

Optional

Optional

Optional

Page 16 of 53


SECRET

1.6

Introduction to the Interface Modules Supported by the Quidway AR 19-1X Ser ies 1.6.1

Interface Modules Currentl y Support ed

The Quidway AR 19-1X Series supports the SIC module as well as the built-in VPM module. For details, refer to "9 Appendix: Slot Restriction for Host Interface Card". All the SIC modules for the Quidway AR 19-1X series are in the SIC pack. The SIC pack and VPM module are put under the top-level code 0105A09M, parallel with the router host. The related codes and descriptions of SIC modules and VPM modules supported are as follows. Table 5

SIC module table of the Quidway AR 19-1X series

0223A02F item description: Router-Universal SIC Module No.

2009-03-05

Code

1

0231A07M

2

0231A644

3

0231A07Y

4

0231A13S

5

0231A30W

6

0231A30Y

7

0231A891

8

0231A892

9

0231A893

10

0231A894

11

02311371

Datacom

Equipment-QuidwayAR

19/29/49

Descripti on

Acro nym

Remarks

Functional module-Quidway AR 19-62-RTVM1S1GEC-1-port 10M/100M/1000M SIC module for electronic and optical Ethernet ports Functional module-Quidway AR 49-65-RTVM1S4FSW-4 port 10M/100M Ethernet layer 2 switching module (RJ45) Functional module-Quidway AR 49-65-RTVM1S9FSW-9 port 10M/100M Ethernet layer 2 switching module (RJ45) Functional module-Quidway AR 49-65-RTVM1S1VE1-1VT1-SIC module Functional module-Quidway AR 49-65-RTVM1S1BS-1-port ISDN basic rate S/T interface SIC module Functional module-Quidway AR 49-65-RTVM1S1BU-1-port ISDN basic rate U interface SIC module Functional module-Quidway AR 49-65-RTVM2S1BSV-1-port ISDN basic rate S/T voice interface SIC module Functional module-Quidway AR 49-65-RTVM2S2BSV-2-port ISDN basic rate S/T voice interface SIC module Functional module-Quidway AR 49-65-RTVM2S1FEF-1-port 100M SFP SIC module Functional module-Quidway AR 49-65-RTVM2S2S1O-2FXS+1FXO voice SIC module Functional module-QuidwayR1760-RTHM31FEA1-port 10M/100M Ethernet electrical interface module (RJ45)

RT-SIC-1GEC

Optional

Huawei Confidential

RT-SIC-4FSW

Optional

RT-DSIC-9FS W

Optional

RT-SIC-1VE1

Along VPM

RT-SIC-1BS-V 2

Optional

RT-SIC-1BS-V 2

Optional

RT-SIC-1BSV

Optional

RT-SIC-2BSV

Optional

RT-SIC-1FEF

Optional

RT-SIC-2FXS 1FXO

Optional

RT-SIC-1FEA

Optional

Page 17 of 53

with

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version) No.

Code

Descripti on

Acro nym

Remarks

12

02312550

Functional module-QuidwayR1760-RTHMN1SAE -1-port enhanced synchronous/asynchronous serial interface module Functional module-QuidwayR1760-RTHMLE1F-1 -port non-channelized E1 interface module Functional module-QuidwayR1760-RTHM6EPRI1-port E1/CE1/PRI compatible interface module Functional module-QuidwayAR28-09-RTHM31FX S-1-port voice module user circuit interface board Functional module-QuidwayAR28-09-RTHM32FX S-2-port voice module user circuit interface board Functional module-QuidwayAR28-09-RTHM32FX O-1-port voice module ATO relay circuit interface module Functional module-QuidwayAR28-09-RTHM32FX O-2-port voice module ATO relay circuit interface module Functional module-QuidwayAR28-09-RTHM11A DI-1-port ADSL over ISDN interface card Functional module-QuidwayAR28-09-RTHM11A DP-1-port ADSL over POTS interface card Functional module-Quidway AR 28-09-RTHM31AM-1-port analog modem interface module

RT-SIC-1SAE

Optional

13

02311804

14

02311374

15

0231A08Q

16

0231A08P

17

0231A07S

18

0231A07R

19

0231A08M

20

0231A08N

21

0231A39P

Table 6

No.

2009-03-05

SECRET

RT-SIC-1E1-F

Optional

RT-SIC-EPRI

Optional

RT-SIC-1FXSV2

Optional

RT-SIC-2FXSV2

Optional

RT-SIC-1FXOV2

Optional

RT-SIC-2FXOV2

Optional

RT-SIC-1ADS L-I

Optional

RT-SIC-1ADS L

Optional

RT-SIC-1AMV3

Optional

Built-in module table of the Quidway AR 19-1X series Code

1

0231A05P

2

0231A24K

3

0231A24L

4

0231A24M

Descriptio n

Acron ym

Remarks

Functional module-Quidway AR 49-65-RTVM1VPM-32-line voice processing unit Functional module-Quidway AR 49-65-RTVM1VPM-24-line voice processing unit Functional module-Quidway AR 49-65-RTVM1VPMA-16-line voice processing unit Functional module-Quidway AR 49-65-RTVM1VPMB-8-line voice processing unit

RT-VPM32

Optional. Only AR913W and AR 19-15-IW are supported. Optional. Only AR 19-13-IW and AR 19-15-IW are supported. Optional. Only AR913W and AR 19-15-IW are supported. Optional. Only AR913W and AR 19-15-IW are supported.

Huawei Confidential

RT-VPM24

RT-VPM16

RT-VPM8

Page 18 of 53


1.6.2

SECRET

Descr ipt ion of Interface Module Locatio n

For the Quidway AR 19-1X series, the requirement of the interface module location is as follows: VPM module is located inside the host of the router, and can only be installed by opening the chassis.

1.7

Overall Conf igu ration Princi ple of t he Quidway AR 19-1X Series

The Quidway AR 19-1X Series is the modular router, and can be configured with various interface modules as needed. The Quidway AR 19-1X Series has one SIC/DSIC slot and is available for one SIC/DSIC card. For details, refer to "9 Appendix: Slot Restriction for Host Interface Card". The structure of the current product list of the Quidway AR 19-1X series can accommodate the following two sales models: 1. Sale through agents This mode mainly refers to the contract with the distributors or the upgrade of the existing configuration. In this situation, the configuration is relatively simple. You only need to choose corresponding hosts, interface modules, and cables according to the contract for configuration. The configurations of hosts, interface modules, and cables are independent of each other. The operators need not consider the relationship between hosts, interface modules, and cables. 2. Tie-in sale with other products of the company In this model, the Quidway AR 19-1X series and other products of the company can be sold in networking applications. In this case, the salesperson just needs to select the needed host, interface modules and cables according to the contract, but they also need to consider the corresponding relationship between the host and its interfaces and cables. This mode also applies to the sporadic distribution of goods to customers. Some of the basic configuration principles are as follows: Important: The orders for the host of the Quidway AR 19-1X series must be coded and placed in the 0235xxxx category, not the 0105xxxx or 0303xxxx category. The orders for various SIC interface modules and VPM modules must be coded and placed in the 0231xxxx category, not in the 0105xxxx or 0303xxxx category. The interface modules for the Quidway AR 19-1X series need to be configured according to the specific requirement of the order. Multiple kinds of interface modules can be used for the Quidway AR 19-1X series. These interface modules can also be used for the AR 19-16, AR29-01/21/41, AR49-45 routers. In addition, there will also be new interface modules coming out one after another to meet different needs of the users. The Quidway AR 19-1X can accommodate one SIC interface modules and one VPM module at most. The configurations of cables are directly related to the interface modules. The relationship is described in details later. The Quidway AR 19-1X Series is a standard configuration. In product configuration, only cables with standard lengths need to be provided. There is no need for a field survey when selling through agents. However, a field survey is required when selling together with other products of the company. In this case, the requirements raised cannot be met through the configuration of the Quidway AR 19-1X series, but through the configuration of other products. The input range of the AC power supply for the Quidway AR 19-1X series is 100V AC to 240V AV, 50Hz to 60Hz. Therefore, the product can also be used in places where the 110V AC power supply is used.

2009-03-05

Huawei Confidential

Page 19 of 53


SECRET

The accessories delivered are subject to the host. The normal delivery and configuration are not necessary to consider the accessory. If the host is confirmed, the corresponding accessories are attached (including the documents and the CDs). The intention of the list in this version is to make all the interface modules and hosts the ATO items (AI) separately packed. The interface modules and the hosts will be delivered completely separated, similar to the sales of computer accessories. The purpose is mainly to accommodate the distribution of mid-to-low range routers to simplify production testing and debugging, improving market response speed.

1.8

Overall Conf igur ation Descri pti on of the Quidway AR 19-1X Series

Overall configuration description: 1. For the configuration of hosts and modules, the lists prepared by the marketing and configuration personnel only need to reach the level of hosts and modules, and they don’t need to care about the stuff below the level of hosts (main boards) and modules. The reason is that the contents of each kind of host (main board) and module are fixed and are ATO items. The code of a host (main board) or a module can contain all the contents inside. 2. For optional cables, the configuration can go down further in detail. Refer to the description of cable configuration in the text below. 3. The Quidway AR 19-1X series is configurable, and the host is powered by the AC power supply. The input voltage range for the host is AC 100V-240V/50-60Hz, so the product can be used in countries or regions where the grid voltage is 110V. 4. The code and description of the AC power supply for the Quidway AR 19-1X series are as below: 0213A00C item description: Primary Power Supply-10degC-55degC-90Vac-264Vac-12V/2.2A 5. In distribution model, the quantity of the interface modules is determined based on the requirements of users, and no longer specifically corresponds to the host. However, for the internal bundled sales within the company, the corresponding relationship between the host and the modules still needs to be considered. For the Quidway AR 19-1X series, the quantity of the optional interface modules is only one. The interface modules usually need to have corresponding cables (they can also do without cables depending on the requirements of the users). For details on configuration of specific interface modules, refer to the section on the module configuration. 6. When in configuration, the choice needs to be made by considering two sales models, that is, distribution and tie-in sales. 7. AUX cables are not included in the list. Special delivery can be arranged if they are specifically needed. 8. The host of the Quidway AR 19-1X has a USB port, and can accommodate a USB flash memory. The USB flash memory is put directly under code 0105, and the users can select USB flash memories with different capacities according to their needs. 9. The accessories delivered are subject to the host. The normal delivery and configuration are not necessary to consider the accessory. If the host is confirmed, the corresponding accessories are attached (including the documents and the CDs). The configuration of the router is explained as follows from four aspects, that is, the host, the modules, the cables, the optical fibers.

2009-03-05

Huawei Confidential

Page 20 of 53


SECRET

2

Host Configuration Description of the Quidway AR 19-1X Seri es The Quidway AR 19-1X series can only use an AC power supply, and the code and description of the host are as follows: Table 7

Host code of the Quidway AR 19-1X series

0105A09M item description: Router-International Version No.

Code

1

0235A34D

2

0235A34E

3

0235A34F

4

0235A34G

5

0235A34H

6

0235A34J

Datacom

Equipment-Quidway

Descripti on Assembly-Quidway AR 19-10-RTVZ31910-Router Host (AC)-International Version Assembly-Quidway AR 19-10-RTVZ31910-Router Host (AC)-WLAN-supported-Intern ational Version Assembly-Quidway AR 19-13-RTVZ31913I-Router Host (AC)-International Version Assembly-Quidway AR 19-13-RTVZ31913IW–Router Host (AC)-WALN-supported-Intern ational Version Assembly-Quidway AR 19-15-RTVZ31915I-Router Host (AC)-International Version Assembly-Quidway AR 19-15-RTVZ31915IW-Router Host (AC)-WALN-supported-Intern ational Version

AR

Quantity

19-1X

Series Remarks

At customers' option

Optional


Optional


Optional


Optional


Optional


Optional

To accommodate the distribution model of the product, the host is made into an ATO item with fixed composition, and the inventory can be made directly. Therefore, for configuration and marketing personnel, they can just directly select the host needed under item 0105A09M. Important: the orders for the host of the Quidway AR 19-1X series must be coded and placed in the 0235xxxx category, not the 0105xxxx or 0303xxxx category. Specific configuration description is as follows: 1. The main board of the Quidway AR 19-1X series is fixed inside the chassis, and cannot be delivered separately. The total normative capacity of the memory on the main board is 256 MB. 2. The host of the Quidway AR 19-1X series is an ATO item, and all the items in it must be configured. 3. For orders under the distribution model and the tie-in model, the salespersons first need to select the types of the hosts according to the requirements of the orders or the plans, that is, to select the hosts according to the models of the routers. 4. The input voltage range for the host of the Quidway AR 19-1X series is AC 100V-240V/50-60Hz, so the product can be used in countries or regions where the grid voltage is 110V. 2009-03-05

Huawei Confidential

Page 21 of 53


SECRET

5. To facilitate production and distribution, each kind of host is packed separately and put in the package of the entire machine of the router during delivery. The selected modules are not inserted in the host either, but packed separately. All the expandable slots of the host are installed with false parts to replace the real ones. The selected modules should be installed and tested by the distributors before they are delivered to the end users. If the tie-in sales are performed by the customer service personnel, when deliveries are made to the users directly, the modules will be installed by the distributors or the users themselves. The main idea is to take reference to the sales model of computers and their accessories, in which the separately supplied accessories can be installed by the users. 6. The quantity of the hosts of the Quidway AR 19-1X series is configurable. 7. The power supply of the Quidway AR 19-1X series is put within the chassis and goes with the host, no need to be delivered separately. 8. The accessories delivered are decided by the host. The normal deliver and configuration are not necessary to consider the accessory. If the host is confirmed, the corresponding accessories are attached (including the documents and the CDs). The composition of each type of host is essentially the same, namely, the chassis of the general assembly, the accessories delivered, the complete set of packing materials, the necessary cables, the false parts serving as handlers, as well as the labels. For general configuration and marketing personnel, they only need to reach the host level without going down further.

2009-03-05

Huawei Confidential

Page 22 of 53


SECRET

3

Description of Storage Media Expansion for the Quid way AR 19-1X Series 3.1

Selectio n of USB Flash Memory

The AR 19-1X router has one USB interface for the external USB flash memory connection. The USB flash memory can be used to store system files, configuration files, as well as log files.

2009-03-05

Huawei Confidential

Page 23 of 53


SECRET

4

Configuration of SIC Interface Module for the Quid way AR 19-1X Series To facilitate production and distribution, all the interface modules of the Quidway AR 19-1X series are made into ATO items. Meantime, all the interface modules include the corresponding packing materials. Normally, they are not directly installed on the host during delivery, but separately packed, shipped together with the host or separately. Generally, the configuration of the interface modules includes two parts: the first is the selection of the interface modules, and the second is the selection of the electric and optical fibers. If selling by distributors, you do not need to consider the corresponding relationship between cables and optical fibers. However, for bundling model and direct delivery to the users, the types and quantities of the single-board electric and optical fibers need to be determined according to the features of the circuits and the number of the interfaces, after selecting corresponding interface modules. In other words, selection needs to be made in the external cable set (04000077) and external optical fibers suite (04100053). Important: the orders for the interface module of the Quidway AR 19-1X series must be coded and placed in the 0231xxxx category, not the 0305xxxx, 0303xxxx, or 0302xxxx category. The interface modules of the Quidway AR 19-1X series mainly include the SIC interface modules and the built-in VPM card modules. The detailed configuration of each interface module is described below.

4.1

Config uratio n o f the RT-SIC-1GEC Interface Modul e

RT-SIC-1GEC is the SIC module for 1-port 10M/100M/1000M electrical interface and optical Ethernet interface of the Quidway AR 1900/2900/4900 series router, providing one RJ45 electric port and one SFP optical port to the outside. It can work independently in the electrical interface mode or in the optical interface mode. When the two modes exist simultaneously, the electrical interface takes priority. When working in the optical port mode, the SFP optical module needs to be selected and purchased separately. Because only one socket for the SFP optical module is delivered without the optical module along (the optical module is shipped separately). When the electrical interface is used, the module has two operating modes, namely full-duplex and half-duplex, and the full-duplex mode is more commonly used. The configuration list of the RT-SIC-1GEC module is shown in the table below: Table 8

Configuration list of the RT-SIC-1GEC module

0223A02F item description: Datacom Equipment-QuidwayAR 19/29/49 router-Universal SIC Module No. 1

Code 0231A07 M

Descripti on

Acron ym

Functional module-Quidway AR RT-SIC-1GEC 49-65-RTVM1S1GEC-SIC module for 1-port 10M/100M/1000M electronic and optical Ethernet ports

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1GEC module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. The Quidway AR 19-1X series has one 10/100M Ethernet interface, which needs to be taken into consideration during designing. 3. RT-SIC-1GEC module does not have optical fibers and optical module. If optical port is to be used, you need to configure as follows: 2009-03-05

Huawei Confidential

Page 24 of 53


SECRET

The optical module of RT-SIC-1GEC (pluggable SFP optical module) needs to be selected. The list of currently available optical modules is below. Table 9

Configuration list of the RT-SIC-1GEC SFP module

0223A02R item description: Assembly/Accessory-Quidway AR 19/29/49 Series Routers-Universal Optical Module No.

Code

1

02315204 (Corresponding to BOM of H3C: 0231A562)

2


3

02315468 (Corresponding to BOM of H3C: 02312173)

4


5


6

02315285 (Corresponding to BOM of H3C: 0231A11U)

7

02315286 (Corresponding to BOM of H3C: 0231A11V)

8


Descriptio n

Acron ym

Remarks

Datacom Products, DP0M0ESFP, Optical Transceiver, ESFP, GE, Multi-mode Module (850nm, 0.5km, LC) Datacom Products, DP0M0SFP, Optical Transceiver, SFP, GE, Single-mode Module (1310nm, 10km, LC) Datacom Products, DP0M8SFP, Optical Transceiver, SFP, GE, Single-mode Module (1550nm, 70km, LC) Datacom Products, DP0M9SFP, Optical Transceiver, SFP, GE, Single-mode Module (1550nm, 40km, LC) Datacom Products, DP0M10SFP, Optical Transceiver, SFP, GE, Single-mode Module (1310nm, 40km, LC) Datacom Products, DP0M6SFP, Optical Transceiver, SFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC) Datacom Products, DP0M7SFP, Optical Transceiver, SFP, GE, BIDI Single-mode Module (TX1490/RX1310, 10km, LC) Datacom Products, DP0M2ESFP, Optical Transceiver, ESFP, GE, Single-mode Module (1550nm, 100km, LC)

eSFP-GE-S X-MM850

Configurable

SFP-GE-LXSM1310

Configurable

FW-SFP-SM (70KM 1550nm LC)

Configurable


Configurable


Configurable

SFP-GE-LXSM1310-BID I

Configurable

SFP-GE-LXSM1490-BID I

Configurable

eSFP-GE-Z X100-SM15 50

Configurable

[Note]: As the receiving and transmitting bands of the two optical modules (02315285 and 02315286) need to match each other, therefore, the two ends of communications need to be used in pairs. 4. The cable and the optical cable used by the 1GEC module can be selected from the external cables set and optical fiber suite. If the 1000M electrical interface is used, one network cable (04027102) needs to be supplied additionally, and the following cables to be selected from the external cables (04000077) are as follows:

2009-03-05

Huawei Confidential

Page 25 of 53


SECRET

04027102 single cable-hub to server straight-through network cable-3.00m-(network interface 8bit-I)-(CC4P0.5 gray)-(network interface 8 bit-I)-C&C08C Each of the interfaces of the 1GEC module has two ports for receiving and transmitting respectively. Therefore, optical fibers must be selected in pairs. In other words, each interface should select two optical fibers. (Only one optical fiber is needed when the BIDI optical module is selected.) The types of connectors (the module side is LC/PC), the length and the modes of the optical modules (single-mode/multi-mode) need to be considered for cables selection. Currently, there are six types of single-mode optical fibers and five types of multi-mode optical fibers available for the 1GEC module. They need to be selected from the optical fiber suite, as shown in the two tables below. Table 10

Configuration list of the single-mode cables for the RT-SIC-1GEC module

04100053 item description: Optical fiber suite-8040-external cable set No.

Code

Descripti on

1

14130193

Patch Cord, LC/PC-SC/PC, Single-mode, 2mm, 5m

2

14130195


3

14130199


4

14130287

Patch Cord, LC/PC-SC/PC, Single-mode, 2mm, 2.7m

5

14130251


6

14130280


Table 11

Quantity At customers' option Configurable At customers' option Configurable At customers' option Configurable At customers' option Configurable At customers' option Configurable At customers' option Configurable

Remarks Optional

Optional

Optional

Optional

Optional

Optional

Configuration list of the multi-mode cables for the RT-SIC-1GEC module

04100053 item description: optical fiber suite-8040-external optical fiber suite No.

Code

Descripti on

1

14130296

2

14130222

3

14130223

4

14130279

5

14130295

Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 5m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 10m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 10m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 20m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 20m

Quantity At customers' option Configurable At customers' option Configurable At customers' option Configurable At customers' option Configurable At customers' option Configurable

Remarks Optional Optional Optional Optional Optional

4.2

Configuration of the RT-SIC-4FSW Module and the RT-SIC-9FSW Interface Modul e The RT-SIC-4FSW module and the RT-SIC-9FSW module can be used as the 4/9-port 10M/100M Ethernet layer-2 switching interface module of Quidway AR 1900/2900/4900 series routers. The module mainly realizes the layer-2 switching function of the 4/9-line Ethernet, providing up to 4/9 10/100Base-Tx Ethernet ports on the router. This module can be used as 2009-03-05

Huawei Confidential

Page 26 of 53


SECRET

the equipment of switching/routing integration in small-scale intranets, directly connecting the PCs and networking equipment within the organizations. The module can provide 4/9 common RJ45 connectors to the outside. When the user adopts the C5 cable (both crossover and straight-through network cables can be supported), the 100M layer-2 line speed transmission can be reached. Each interface can work in 10M/100M mode, and can be adaptive. Meanwhile, the module has two operating modes, namely, full-duplex and half-duplex, and the full-duplex mode is more commonly used. The configuration list of the RT-SIC-4FSW module and the RT-SIC-9FSW module is shown in the table below: Table 12

The configuration list of the RT-SIC-4FSW module and the RT-SIC-9FSW

module

0223A02F item description: Assembly/Accessory-QuidwayAR 19/29/49 Series Routers-Universal SIC Module No.

Code

1

0231A644

2

0231A07Y

Descripti on Functional module-Quidway AR 49-65-RTVM1S4FSW-4-port 10M/100M Ethernet layer 2 switching module (RJ45) Functional module-Quidway AR 49-65-RTVM1S9FSW-9-port 10M/100M Ethernet layer 2 switching module (RJ45)

Acro nym

Remarks

RT-SIC-4FSW

Optional

RT-DSIC-9FSW

Optional

Configuration description: 1. The components of the RT-SIC-4FSW module and the RT-SIC-9FSW module are mandatory. The configuration is simple, and you just need to select the code of the module directly. 2. After the RT-SIC-4FSW module and the RT-SIC-9FSW module are selected, the number of the Ethernet cables should be determined according to the number of the Ethernet interfaces. One network interface must be configured with one network cable (04027102). The following cables to be selected from the external cables set (04000077) are as follows: 04027102 single cable-hub to server straight-through network cable-3.00m-(network interface 8bit-I)-(CC4P0.5 gray)-(network interface 8bit-I)-C&C08C 3. When the SIC slot of the Quidway AR 19-1X series supports the RT-SIC-9FSW module, the guide rail on the right side of slot needs to be disassembled, which needs attention in the installation. 4. The AR 19-1X series router has already come with four 10/100M Ethernet interfaces, which needs to be taken into consideration during designing.

4.3

Config uratio n of the RT-SIC-1FEA Interface Module

The RT-SIC-1FEA module is the 1-port 10M/100M Ethernet SIC interface module (RJ45) that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to realize the access and forward of the Ethernet data at 10M/100M. The configuration list of the RT-SIC-1FEA module is shown in the table below:

2009-03-05

Huawei Confidential

Page 27 of 53

Hardware Configuration Manual of Quidway AR 19-1XS Series Routers (International Version) Table 13

SECRET

Configuration list of the RT-SIC-1FEA module

0223A02F item description: Assembly/Accessory-Quidway AR 19/29/49 Series Routers-Universal SIC Interface Module No. 1

Code 02311371

Descriptio n Quidway R1760,RTHM31FEA, 1-Port 10/100M Ethernet Electrical Interface Board(RJ45)

Acro nym RT-SIC-1FEA

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1FEA module are mandatory, and the configuration is quite simple. 2. The AR 19-1X series router has one 10/100M Ethernet interface, which needs to be taken into consideration during designing. 3. The cables for the RT-SIC-1FEA module are required items, and need not be selected from the external cable set.

4.4

Config uratio n of the RT-SIC-1SAE Interface Module

The RT-SIC-1SAE module is the 1-port enhanced synchronous/asynchronous serial interface module (RJ45) that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to complete the transmission and processing of one line of the synchronous/asynchronous serial data streams. This module can support multiple protocols, including V.24, V.35, X.21, RS449, and RS530. The configuration list of the RT-SIC-1SAE module is shown in the table below: Table 14

Configuration list of the RT-SIC-1SAE module


Code

Descripti on

02312550

Quidway R1760,RTHMN1SAE, 1-Port Enhanced Synchronous/Asynchronous Serial Interface Card

Acro nym RT-SIC-1SAE

Remarks Optional

Configuration description: 1. No cable for the RT-SIC-1FEA module is required. Select the cable from the external cable set for application if needed. For distribution, you do not need to consider the corresponding relationship of cables. However, for bundling model and direct delivery to the users, the types and quantities of the network cable need to be determined according to the features of the circuits and the number of the interfaces, after selecting the RT-SIC-1SAE module. For example, for each RT-SIC-1SAE module, at most one additional cable should be selected, but the specific type of the cable needs to be decided according to the actual requirements. Currently 10 types of cables can be selected, as shown in the table below, and they need to be selected from the external cable set (04000077). V.35 DCE cable V.35 DTE cable V.24 DCE cable V.24 DTE cable 2009-03-05

Huawei Confidential

Page 28 of 53


SECRET

X.21 DCE cable X.21 DTE cable RS449 DCE cable RS449 DTE cable RS530 DCE cable RS530 DTE cable Table 15

Configuration List of Optional Cables for the RT-SIC-1SAE Module

04000077 external set-Quidway3680E external cable set No.

Code

Descripti on

1

04043589

2

04043590

3

04043591

4

04043592

5

04043593

6

04043594

7

04043595

8

04043596

9

04043597

10

04043770

Single Cable, V.24 Serial Port Cable, 3m, D25M, CC(5P+8C)0.32P296U(S), D28M, DTE Single cable-V.24 serial cable-3m-(D25 female)-(CC(5P+8C)0.32P547U(S))-(D2 8 male)-DCE Single cable-V.35 serial cable-3m-(D28 male)-(8*CC(5P+8C)0.32P547U(S))-(D 34 male+D34 plastic shell)-DTE Single cable-V.35 serial cable-3m-(D28 male)-(8*CC(5P+8C)0.32P547U(S))-(D 34 female+D34 plastic shell)-DCE Single cable-X.21 serial cable-3m-(D15 male)-(CC(5P+8C)0.32P547U(S))-(D28 male)-DTE Single cable-X.21 serial cable-3m-(D15 female)-(CC(5P+8C)0.32P547U(S))-(D2 8 male)-DCE Single Cable,RS449 Serial Port Cable, 3m, D28M, 100CC13P0.32P296U(S), D37M-I, DTE Single Cable,RS449 Serial Port Cable, 3m, D28M, 100CC13P0.32P296U(S), D37F-I, DCE Single cable-RS530 serial cable-3m-(D25 male)-(10CC13P0.32P547U(S))-(D28 male)-DTE Single cable-RS530 serial cable-3m-(D25 female)-(10CC13P0.32P547U(S))-(D28 male)-DCE

Quantity

Remarks


Optional


Optional


Optional


Optional


Optional


Optional


Optional


Optional


Optional


Optional

The above 10 types of cables are optional, and a correct one must be selected from them when selecting the RT-SIC-1SAE module, or the cables will not be attached.

4.5

Configuration of the RT-SIC-1E1-F Module and the RT-SIC-EPRI Interface Modul e The RT-SIC-1E1-F module is the 1-port unchannelized E1 SIC interface module that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to transmit and process E1 data streams. It can provide the Fractional E1 access mode. E1-F does not support channelized E1 processing. The RT-SIC-1E1-F module provides one E1 port for access. The RT-SIC-EPRI module is the 1-port E1/CE1/PRI SIC interface module that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to transmit and process 2009-03-05

Huawei Confidential

Page 29 of 53


SECRET

E1 data streams. Meanwhile, it can provide CE1 access and the ISDN PRI function, realizing multiple functions on one board. The configuration list of the RT-SIC-1E1-F module and the RT-SIC-EPRI module is shown in the table below: Table 16

Configuration of the RT-SIC-1E1-F module and the RT-SIC-EPRI module

0223A02F item description: Assembly/Accessory- Quidway AR 19/29/49 Series Routers-Universal SIC Interface Module No.

Code

1

02311804

2

02311374

Descriptio n Quidway R1760,RTHMLE1F, 1-Port E1 & Fractional E1 Interface Module Quidway R1760,RTHM6EPRI, 1-Port Interface Card Of E1/CE1/PRI Compatible

Acron ym

Remarks

RT-SIC-1E1-F

Optional

RT-SIC-EPRI

Optional

Configuration description: 1. The components of the RT-SIC-1E1-F module and the RT-SIC-EPRI module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. For distribution, you do not need to consider the corresponding relationship of cables. However, for bundling model and direct delivery to the users, the types and quantities of the network cable need to be determined according to the features of the circuits and the number of the interfaces, after selecting the RT-SIC-1E1-F module and the RT-SIC-EPRI module. The cable configuration of the RT-SIC-1E1-F module and the RT-SIC-EPRI module are shown in the table below. Seven kinds of cables and two kinds of connectors are available in total. All the seven types of cables are optional (among them, cables with the code of 04026105 are mainly used in self-looped testing, and are rarely used in routine delivery activities). Before configuring the cables for the RT-SIC-1E1-F module and the RT-SIC-EPRI modules, you need to check out the features of the E1 line first. The cable connecting with the RT-SIC-1E1-F module is the E1 G.703 cable, which has two types available for selection, and both types use the DB-15 connector at the interface end of the module, but at the network end, the connectors are respectively: BNC connector, corresponding to the 75 Ω non-balanced coaxial cables (codes: 04026106, 04040148, and 04040149) z

RJ45 crystal connector, corresponding to 120 Ω balanced unshielded twisted pair cables (codes: 04026104, 04040150, and 04040151) z

Table 17

Cable Configuration of the RT-SIC-1E1-F module and the RT-SIC-EPRI

module


2009-03-05

Code

1

04026104

2

04026105

3

04026106

Descripti on

Acro nym

Trunk Cable, G.703 Cable, 3.00m, 120ohm, At 1E1, 0.4mm, D15M+Magnetic Ring customers' 17010171, 120CC2P0.4P430U(S), MP8-II, option W4157 Trunk Cable, G.703 Cable, 3.00m, 120ohm, At 1E1, 0.4mm, D15M+Magnetic Ring customers' 17010171, 120CC2P0.4P430U(S), MP8-II, option W4157 Trunk Cable, 3.00m, 75ohm, 1E1-2.2mm, At D15M+Magnetic Ring 17010171, customers' 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V, option Quidway 2500, W4159

Huawei Confidential

Remarks Optional

Optional

Optional

Page 30 of 53


Code

Descripti on

4

04040148

5

04040149

6

14040202

7

04040150

8

04040151

9

14080099

10

04026813

Trunk Cable, 20.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V Trunk Cable, 40.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V Coaxial Connector, BNC, 75ohm, Straight/Socket, Dual, Female, Connected With E1 Cable BNC Male Plug Trunk Cable, G.703 Cable, 20.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Trunk Cable, G.703 Cable, 40.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Network interface connector-8-bit/8PIN-unshielded-convertion socket-NO keyed Single Cable, 120ohm-75ohm Converter Box (With BNC Socket 14040083), 2*BNC75SF, 26UL2464(4C)B+PCB03022938)

SECRET

Acro nym

Remarks

At customers' option At customers' option At customers' option At customers' option

Optional


Optional


Optional

Optional

Optional

Optional

Optional

When cables with BNC connectors (codes are 04026106, 04040148, and 04040149) are selected, you still need to select two coaxial connectors (14040202) for each E1 interface based on the 1:2 ratio in accordance with the number of the cables. This is to facilitate the users or the customer service personnel to extend the length of the cables. When cables with the RJ45 crystal connectors (codes are 04026104, 04040150, and 04040151) are selected, you still need to select one more RJ45 connector (14080099) for each E1 interface based on the 1:1 ratio in accordance with the number of the cables. The above two categories of cables are optional, and need to be purchased separately. The choice must be made when configuring the E1 module. Because RT-SIC-1E1-F and RT-SIC-EPRI provide one E1 port respectively, each module needs to select one cable (or one pair of cables). 04026813 is used for conversion between 120 Ω and 75Ω resistance for the E1 cables. You can select it if needed. Generally, our interface modules already support both 120 Ω and 75Ω resistance, so you are not recommended to use resistance conversion for the circuit matching. 3. RT-SIC-1E1-F and RT-SIC-EPR have an 8-bit DIP switch within them. By default, all the 8 bits are ON, indicating the 75 Ω unbalanced coaxial cable (such as 04026106) is selected. To select the 120 Ω balanced and unshielded twisted pair (such as 04026104), the DIP switch should be switched to OFF. For details, refer to Installation Manual of Quidway AR 1900 Series Routers.

4.6

Configuration Interface Modul e

of

the

RT-SIC-1FXS-V2

and

RT-SIC-2FXS-V2

RT-SIC-1FXS-V2 and RT-SIC-2FXS-V2 modules are the SIC interface modules for the 1/2-port voice module subscriber circuit, which can be used for the Quidway AR 1900/2900/4900 series routers. Their main function is to access and process the analog voice signals of 1/2-lines, realizing the transmission of voice signals on the data communication networks. RT-SIC-1FXS-V2 and RT-SIC-2FXS-V2 realize the analog user interface of 1/2-ports respectively, and can directly drive 1/2 common analog telephone sets.

2009-03-05

Huawei Confidential

Page 31 of 53


SECRET

The configuration list of the RT-SIC-1FXS-V2 module and the RT-SIC-2FXS-V2 module is shown in the table below: Table 18

Configuration list of RT-SIC-1FXS-V2 and RT-SIC-2FXS-V2

0223A02F item description: Assembly/Accessory-Quidway AR 19/29/49 Series Routers-Universal SIC Interface Module No.

Code

1

0231A08Q

2

0231A08P

Descripti on Functional module-QuidwayAR28-09-RTHM 31FXS-1-port voice module user circuit interface board Functional module-QuidwayAR28-09-RTHM 32FXS-2-port voice module user circuit interface board

Acron ym

Remarks

RT-SIC-1FXS-V2

Optional

RT-SIC-2FXS-V2

Optional

Configuration description: 1. The components of the RT-SIC-1FXS-V2 module and the RT-SIC-2FXS-V2 module are mandatory. The configuration is simple, and you just need to select the code of the module directly. 2. The cable for the RT-SIC-1FXS-V2 module and the RT-SIC-2FXS-V2 module are required items, and need not be selected from the external cable set.

4.7

Configuration of RT-SIC-2FXO-V2 Modu le

the

RT-SIC-1FXO-V2

Module

and

the

RT-SIC-1FXO-V2 and RT-SIC-2FXO-V2 modules are the SIC interface modules for 1/2-ports voice module ATO relay circuit that can be used for the Quidway AR 1900/2900/4900 series routers. Their main function is to receive and process 1/2-lines of the analog voice signals, realizing the voice signal transmission on the data communication networks. The RT-SIC-1FXO-V2 module and the RT-SIC-2FXO-V2 module realize the relay interfaces of the 1/2-ports ATO circuits respectively, and can realize the access of 1/2-line analog users, such as the connection of external telephone lines. The configuration list of The RT-SIC-1FXO-V2 module and the RT-SIC-2FXO-V2 module is shown in the table below. Table 19

Configuration list of RT-SIC-1FXO-V2 and RT-SIC-2FXO-V2


Code

Descripti on

1

0231A07S

2

0231A07R

Functional module-QuidwayAR28-09-RTHM 32FXO-1-port voice module ATO relay circuit interface module Functional module-QuidwayAR28-09-RTHM 32FXO-2-port voice module ATO relay circuit interface module

Acron ym

Remarks

RT-SIC-1FXO-V2

Optional

RT-SIC-2FXO-V2

Optional

Configuration description: 1. The components of the RT-SIC-1FXO-V2 module and the RT-SIC-2FXO-V2 module are mandatory. The configuration is simple, and you just need to select the code of the module directly. 2009-03-05

Huawei Confidential

Page 32 of 53


SECRET

2. The cable for the RT-SIC-1FXO-V2 module and the RT-SIC-2FXO-V2 module are required items, and need not be selected from the external cable set.

4.8

Config uratio n o f the RT-SIC-1ADSL-I Interface Module

The RT-SIC-1ADSL-I module is the 1-port ADSL over ISDN SIC interface module that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to connect directly to DSLAM through the user’s line and to provide broadband access to the users. RT-SIC-1ADSL-I provides one ADSL (over ISDN) port and connects one telephone line. The configuration list of the RT-SIC-1ADSL-I module is shown in the table below. Table 20

Configuration list of the RT-SIC-1ADSL-I module


Code 0231A08M

Descripti on Functional module-QuidwayAR28-09-RTH M11ADI-1-port ADSL over ISDN interface card

Acron ym RT-SIC-1ADSL-I

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1ADSL-Imodule are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. Cables for the RT-SIC-1ADSL-I module are required items and need not be selected from the external cable set. 3. When the user adopts broadband network access through ADSL, the ISDN function can also be used on the same subscriber line with a splitter, which has already been included in the package and does not need to be supplied separately. 4. Quidway AR 19-15-I and Quidway AR 19-15-IW routers have integrated one port, namely, ADSL2+ over POTS, which needs to be considered in the solution design.

4.9

Config uratio n of the RT-SIC-1ADSL Interf ace Modul e

The RT-SIC-1ADSL module is the 1-port ADSL over POTS SIC interface module that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to connect directly to DSLAM through the subscriber line and to provide broadband access for the users. RT-SIC-1ADSL provides one ADSL (over POTS) port and connects one telephone line. The configuration list of the RT-SIC-1ADSL module is shown in the table below. Table 21

Configuration list of the RT-SIC-1ADSL module


Code

Descripti on

0231A08N

Functional module-Quidway AR28-09-RTHM11ADP-1-port ADSL over POTS interface card

Acron ym

Remarks

RT-SIC-1ADSL

Optional

Configuration description: 1. The components of the RT-SIC-1ADSL module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly.

2009-03-05

Huawei Confidential

Page 33 of 53


SECRET

2. Quidway AR 19-15-I and AR 19-15-IW routers have integrated one port, namely, ADSL2+ over POTS, which needs to be considered in the solution design. 3. Cables for the RT-SIC-1ADSL-I module are required items and need not be selected from the external cable set. 4. When the user adopts broadband network access through ADSL, the ISDN function can also be used on the same subscriber line by one splitter, we have prepared a separate list of optional parts including one type of splitter, which can be used by the users if needed. As shown in Table 27 , currently only one type of splitter is available. The splitter is optional and not required. It can be selected based on the actual application environment of the users. Generally, one ADSL port is provided with one splitter. Table 22

List of the Optional Accessories for the RT-SIC-1ADSL

No. 1

4.10

Code 02231674

Descripti on DEMUX, ADSL Full Rate Demultiplexer, Low Pass Filter

Quantity At customers' option

Remarks Optional

Config uratio n of the RT-SIC-1AM-V3 Interface Modul e

The RT-SIC-1AM-V3 module is the SIC interface module for the 1-port analog modem that can be used for the Quidway AR 1900/2900/4900 series routers. Its main function is to perform the receiving and processing tasks for the 1-line analog modem calls and connect one external telephone line. The configuration list of the RT-SIC-1AM-V3 module is shown in the table below. Table 23

Configuration list of the RT-SIC-1AM-V3 module


Code 0231A39P

Descriptio n Functional module-Quidway AR 28-09-RTHM31AM-1-port analo g modem interface module

Acron ym RT-SIC-1AM-V3

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1AM-V3 module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. Cables for the RT-SIC-1AM-V3 module are required items and need not be selected from the external cable set.

4.11

Config uratio n o f the RT-SIC-1VE1 Interface Modul e

The RT-SIC-1VE1 module is the 1-line E1 voice SIC interface module available for the Quidway AR 1900/2900/4900 series router, functioning for successful processing and transmission of the 30-line voice, data, and facsimile signal on the data communication network. The RT-SIC-1VE1 module provides one E1 port and realizes 1-line E1 voice relay access. The configuration list of the R T-SIC-1VE1 module is shown in the table below.

2009-03-05

Huawei Confidential

Page 34 of 53


SECRET

Configuration list of the R T-SIC-1VE1 module


Code 0231A13S

Descriptio n

Acron ym

Functional module-Quidway AR 49-65-RTVM1S1VE1-1VT1-SIC module

RT-SIC-1VE1

Remarks Optional

Configuration description: 1. The RT-SIC-1VE1 must be used together with one insertion piece, VPM32, VPM16, VPM8, or VPM24. 2. Quidway AR 19-10, Quidway AR 19-10 W, Quidway AR 19-1 and Quidway AR 19-15-I do not support the RT-SIC-1VE1 module. 3. The components of the RT-SIC-1VE1 module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 4. For distribution, you do not need to consider the corresponding relationship of cables. However, for bundling model and direct delivery to users, the type of the cable need to be determined according to the features of the circuits, after selecting the RT-SIC-1VE1 module. The cable connecting with the RT-SIC-1VE1 module is the E1 G.703 cable, which has two types available for selection, and both types use the DB-15 connector at the interface end of the module, but at the network end, the connectors used are respectively: z

BNC connector, corresponding to the 75 Ω non-balanced coaxial cables (codes: 04026106, 04040148, and 04040149)

z

RJ45 crystal connector, corresponding to 120 Ω balanced unshielded twisted pair cables (codes: 04026104, 04040150, and 04040151)

The cable configuration of the RT-SIC-1VE1 module is shown in the table below. Seven kinds of cables and two kinds of connectors are available in total. All the seven types of cables are optional (among them, cables with the code of 04026105 are mainly used in self-looped testing, and are rarely used in routine delivery activities). Table 25

Cable configuration list of the R T-SIC-1VE1 module


2009-03-05

Code

Descripti on

1

04026104

2

04026105

3

04026106

4

04040148

Trunk Cable, G.703 Cable, 3.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring 17010171, 120CC2P0.4P430U(S), MP8-II, W4157 Trunk Cable, 3.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring 17010171, 120CC2P0.4P430U(S), MP8-II, G.703/NT Cable Trunk Cable, 3.00m, 75ohm, 1E1-2.2mm, D15M+Magnetic Ring 17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V, Quidway 2500, W4159 Trunk Cable, 20.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V

Huawei Confidential

Quantity

Remarks


Optional


Optional


Optional


Optional

Page 35 of 53


Code

Descripti on

5

04040149

6

14040202

7

04040150

8

04040151

9

14080099

10

04026813

Trunk Cable, 40.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V Coaxial Connector, BNC, 75ohm, Straight/Socket, Dual, Female, Connected With E1 Cable BNC Male Plug Trunk Cable, G.703 Cable, 20.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Trunk Cable, G.703 Cable, 40.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Network interface connector-8-bit/8PIN-unshielded-con vertion socket-NO keyed Single Cable, 120ohm-75ohm Converter Box (With BNC Socket 14040083), 2*BNC75SF, 26UL2464(4C)B+PCB03022938)

Quantity

SECRET Remarks


Optional


Optional


Optional


Optional


Optional

Optional

When cables with BNC connectors (codes are 04026106, 04040148, and 04040149) are selected, you still need to select two coaxial connectors (14040202) for each RT-SIC-1VE1 interface based on the 1:2 ratio in accordance with the number of the cables. This is to facilitate the users or the customer service personnel to extend the length of the cables. When cables with the RJ45 crystal connectors (codes are 04026104, 04040150, and 04040151) are selected, you still need to select one more RJ45 connector (14080099) for each RT-SIC-1VE1 interface based on the 1:1 ratio in accordance with the number of the cables. This is to facilitate the users or the customer service personnel to extend the length of the cables. The above two categories of cables are optional, and need to be purchased separately. The choice must be made when configuring the RT-SIC-1VE1 module. Because the RT-SIC-1VE1 module provides one E1 port, each module needs to select one cable. 04026813 is used for conversion between 120 Ω and 75Ω resistance for the RT-SIC-1VE1 cables. You can select it if needed. Generally, our interface modules already support both 120Ω and 75Ω resistance, so you are not recommended to use resistance conversion for the circuit matching. 5. The RT-SIC-1VE1 module has an 8-bit DIP switch. By default, all the 8 bits are ON, indicating the 75Ω unbalanced coaxial cable (such as 04026106) is selected. To select the 120Ω balanced unshielded twisted pair (such as 04026104), the DIP switch should be switched to OFF.

4.12

Config uratio n of the RT-SIC-1BS-V2 Interface Module

The RT-SIC-1E1-F module is the short form of the 1-port ISDN BRI S/T interface card available for the Quidway AR 1900/2900/4900 series routers, mainly functioning for successful receiving/transmitting and processing of 1-line ISDN BRI S/T data streams. It has the dial-up mode and the dedicated line mode. The configuration list of the RT-SIC-1BS-V2 module is shown in the table below.

2009-03-05

Huawei Confidential

Page 36 of 53


SECRET

Configuration list of the RT-SIC-1BS-V2 module


Code 0231A30W

Descripti on Functional module-Quidway AR 49-65-RTVM1S1BS-1-port ISDN basic rate S/T interface SIC module

Acron ym

Remarks

RT-SIC-1BS-V2

Optional

Configuration description: 1. The components of the RT-SIC-1BS-V2 module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. Cables for the RT-SIC-1BS-V2 module are required items and need not be selected from the external cable set.

4.13

Config uratio n of the RT-SIC-1BU-V2 Interface Module

The RT-SIC-1BU-V2 module is the short form of the 1-port ISDN BRI U interface card available for the Quidway AR 1900/2900/4900 series routers, mainly functioning for successful receiving/transmitting and processing of 1-line ISDN BRI U data streams. It has the dial-up mode and the dedicated line mode. The configuration list of the RT-SIC-1BU-V2 module is shown in the table below. Table 27

Configuration list of the RT-SIC-1BU-V2 module


Code 0231A30Y

Descriptio n Functional module-Quidway AR 49-65-RTVM1S1BU-1-port ISDN basic rate U interface SIC module

Acron ym RT-SIC-1BS-V2

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1BU-V2 module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. Cables for the RT-SIC-1BU-V2 module are required items and need not be selected from the external cable set.

4.14

Configuration of the RT-SIC-1BSV Module and the RT-SIC-2BSV

Module The RT-SIC-1BSV module and the RT-SIC-2BSV module are the short form of 1/2-port ISDN BRI S/T interface voice modules available for the Quidway AR 1900/2900/4900 series routers. The board mainly functions for access, compression and decompression of the ISDN interface voice signal. The interface meets the ITU-T I.430 standard. The transmission code pattern is pseudo-ternary code, the interface rate is 192Kbit/s and the maximum distance is 1 km in end-to-end method. The upstream connects to the user interface of the ISDN switch, realizing the sending/receiving and compression/decompression for ISDN BRI interface digital voice stream. The upstream connects to TE equipment, so the voice packet is sent to the Internet through other WLAN interface, realizing the VoIP function.

2009-03-05

Huawei Confidential

Page 37 of 53


SECRET

The configuration list of the RT-SIC-1BSV module and the RT-SIC-2BSV module is shown in the table below. Table 28

Configuration list of RT-SIC-1BSV and RT-SIC-2BSV


Code

1

0231A891

2

0231A892

Descripti on Functional module-Quidway AR 49-65-RTVM2S1BSV-1-port ISDN basic rate S/T voice interface SIC module Functional module-Quidway AR 49-65-RTVM2S2BSV-2-port ISDN basic rate S/T voice interface SIC module

Acron ym

Remarks

RT-SIC-1BSV

Optional

RT-SIC-2BSV

Optional

Configuration description: 1. The components of the RT-SIC-1BSV module and the RT-SIC-2BSV module are mandatory. The configuration is simple, and you just need to select the code of the module directly. 2. Cables for the RT-SIC-1BSV module and the RT-SIC-2BSV module are required items and need not be selected from the external cable set.

4.15

Config uratio n of the RT-SIC-1FEF Interface Module

RT-SIC-1FEF is the short form of 1-port 100M Ethernet optical interface card. FE is the acronym of fast Ethernet. F stands for fiber, meaning the (fiber) optical interface. SIC-1FEF mainly functions for successful communication between the router and the LAN. SIC-1FEF supports the following f unctions: Five types of SFP pluggable optical interface modules: z

Multi-mode short haul FE (850nm)

z

Signal-mode medium haul FE (1310nm)

z

Single-mode long haul FE (1310nm)

z

Single-mode long haul FE (1550nm)

z

Single-mode ultra-long haul FE (1550nm)

Users can select the types according to their needs. The rate of interface transmission is below 100 Mbps. Full duplex is supported. The configuration list of the RT-SIC-1FEF module is shown in the table below: Table 29

Configuration list of the RT-SIC-1FEF module


Code 0231A893

Descriptio n Functional module-Quidway AR 49-65-RTVM2S1FEF-1-port 100M SFP SIC module

Acron ym RT-SIC-1FEF

Remarks Optional

Configuration description: 1. The components of the RT-SIC-1FEF module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2009-03-05

Huawei Confidential

Page 38 of 53


SECRET

2. The Quidway AR 19-1X series has one 10/100M Ethernet interface, which needs to be taken into consideration in solution design. 3. The RT-SIC-1FEF module does not have optical fibers and optical module, you need to configure as below. A list of the currently available optical modules is shown in the table below. Table 30

Configuration list of the RT-SIC-1FEF SFP optical module

0223A02R item description: Assembly/Accessory-Quidway AR 19/29/49 Series Routers-Universal Optical Module No.

Code

Descripti on

Acr on y m

1


SFP-FESX-MM1 310

2


3


4


5

02315203 (Corresponding to BOM of H3C: 0231A12T)

6

02315202 (Corresponding to BOM of H3C: 0231A12U)

Datacom Products, DP0M5SFP, Optical Transceiver, SFP, 100M/155M, Multi-mode Module (1310nm, 2km, LC) Datacom Products, DP0M1ESFP, Optical Transceiver, ESFP, 100M/155M, Single-mode Module (1310nm, 15km, LC) Datacom Products, DP0M1SFP, Optical Transceiver, SFP, 100M/155M, Single-mode Module (1310nm, 40km, LC) Datacom Products, DP0M4SFP, Optical Transceiver, SFP, 100M/155M, Single-mode Module (1550nm, 80km, LC) Datacom Products, DP0M3SFP, Optical Transceiver, SFP, FE, BIDI Single-mode Module (TX1310/RX1550, 15km, LC) Datacom Products, DP0M2SFP, Optical Transceiver, SFP, FE, BIDI Single-mode Module (TX1550/RX1310, 15km, LC)

Quantity

At customers' option Configurabl e eSFP-FE At -LX-SM1 customers' 310 option Configurabl e SFP-FE- At LH40-SM customers' 1310 option Configurabl e SFP-FE- At LH80-SM customers' 1550 option Configurabl e SFP-FE- At LX-SM13 customers' 10-BIDI option Configurabl e SFP-FE- At LX-SM15 customers' 50-BIDI option Configurabl e

Remarks Optional

Optional

Optional

Optional

Optional

Optional

[Note]: As the receiving and transmitting bands of the two optical modules (02315285 and 02315286) need to match each other, therefore, the two ends of communications need to be used in pairs. 4. The optical cable used by the 1FEF module need be selected from the external optical fiber suite. Each of the interfaces of the 1FEF module has two ports for receiving and transmitting respectively. Therefore, optical fibers must be selected in pairs. In other words, each interface should select two optical fibers. The types of connectors (the module side is LC), the length and the modes of the optical modules (single-mode/multi-mode) need to be considered for cables selection. Currently, there are six types of single-mode optical fibers and five types of multi-mode optical fibers available for the 1FEF module. They need be selected from the optical fiber suite, as shown in the two tables below.

2009-03-05

Huawei Confidential

Page 39 of 53


SECRET

Configuration list of the single-mode cables for the RT-SIC-1FEF module

04100053 project description: Optical fiber suite-8040-external cable set No.

Code

1

14130193

2

14130195

3

14130199

4

14130287

5

14130251

6

14130280

Table 32

Descriptio n Patch Cord, LC/PC-SC/PC, Single-mode, 2mm, 5m Patch Cord, LC/PC-LC/PC, Single-mode, 2mm, 5m Patch Cord, LC/PC-LC/PC, Single-mode, 2mm, 10m Patch Cord, LC/PC-SC/PC, Single-mode, 2mm, 2.7m Patch Cord, LC/PC-LC/PC, Single-mode, 2mm, 20m Patch Cord, LC/PC, SC/PC, Single-mode, 2mm, 20m

Quantity At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option

Remarks Optional Optional Optional Optional Optional Optional

Configuration list of the multi-mode cables for the RT-SIC-1FEF module


4.16

Code

1

14130296

2

14130222

3

14130223

4

14130279

5

14130295

Descriptio n Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 5m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 10m Patch Cord, LC/PC-SC/PC, Multi-mode, 2mm, 10m Patch Cord, LC/PC, SC/PC, Multi-mode, 2mm, 20m Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 20m

Quantity

Remarks

At customers' option At customers' option At customers' option At customers' option At customers' option

Optional Optional Optional Optional Optional

Configuration of the RT-SIC-2FXS1FXO Interface Module

The RT-SIC-2FXS1FXO module is the SIC interface module for the 2-port voice module subscriber circuit and 1-port voice module ATO relay circuit available for the Quidway AR 1900/2900/4900 series router. The main function is to complete the access and processing of the 1-line and 2-line analog voice signal, realizing the transmission of the voice signal on the data communication network. The RT-SIC-2FXS1FXO module realizes the 2-port analog user interface, that is, two regular telephones and 1-port ATO loop relay interface can be used. It also realizes the access of 1-line analog subscriber line, like external telephone connection. The configuration list of the RT-SIC-2FXS1FXO module is shown in the table below: Table 33

Configuration list of the RT-SIC-2FXS1FXO module


Code 0231A894

Descripti on

Acron ym

Functional module-Quidway AR 49-65-RTVM2S2S1O-2FXS+1FX O voice SIC module

RT-SIC-2FXS1FXO

Remarks Optional

Configuration description: 1. The components of the RT-SIC-2FXS1FXO module are mandatory. The configuration is quite simple, and you just need to select the code of the module directly. 2. The cables for the RT-SIC-2FXS1FXO module are required items, and need not be selected from the external cable set. 2009-03-05

Huawei Confidential

Page 40 of 53


SECRET

5

Configuration Descript ion for External Cable Set of the Quidway AR 19-1X Series The Quidway AR 19-1X router can use the external cable set of the Quidway 3680E router in the 8040 family. The configuration of the external cable set is directly related to the interface modules. For detailed configuration methods, refer to the section of the interface module configuration below. In the external cable set for the Quidway AR 19-1X series, all the cables are optional. Other required cables for routers have already been put under the codes of the corresponding hosts or modules as the mandatory items, such as the cables for the console port, the grounding cables, as well as the required cables for other modules. The configuration of the external cable set is directly related to the interface modules. For detailed configuration methods, refer to the module configuration section. Configuration list for external cable set of the Quidway AR 19-1X series is below. Table 34

Configuration list for external cable set of the Quidway AR 19-1X series


2009-03-05

Code

Descripti on

Quantity

1

04021135

04021136

3

04021137

At customers' option At customers' option At customers' option

Optional

2

4

04021138


Optional

5

04021299

04021300

7

04026104


Optional

6

8

04026105


Optional

9

04026106


Optional

10

04026107

Single Cable, V.24 Serial Port Cable, DTE-3.00m, D25M, CC7P0.32P296U(S), D50M-I, QuidWay2501, W2066 Single Cable, V.24 Serial Port Cable, DCE, 3m, D25F, CC7P0.32P296U(S), D50M-I, W2067 Single Cable, V.35 Serial Port Cable, DTE, 3m, D34M+D34(PS), CC(5P+8C)0.32P296U(S), D50M-I, QuidWay2501, W2068 Single Cable, V.35 Serial Port Cable, DCE, 3m, D34F+D34(PS), CC(5P+8C)0.32P296U(S), D50M-I, QuidWay2501, W2069 Single Cable, Auxiliary Port Cable, 3m, D25M, 2*CC4P0.32P296U(S), DB9M+MP8-VI, QuidwayR2501, W2215 Single Cable, Configuration Cable, 3m, D25F, 2*CC4P0.32P296U(S), DB9F+MP8-VI, QuidwayR2501, W2216 Trunk Cable, G.703 Cable, 3.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring 17010171, 120CC2P0.4P430U(S), MP8-II, W4157 Trunk Cable, 3.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring 17010171, 120CC2P0.4P430U(S), MP8-II, G.703/NT Cable Trunk Cable, 3.00m, 75ohm, 1E1-2.2mm, D15M+Magnetic Ring 17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V, Quidway 2500, W4159 Single Cable, PPP Protocol Cable, 1.83m, D68M, 16*CC8C0.32P296U(S), 8*D25M+8*D9M)


Optional

Huawei Confidential

Remarks

Optional

Optional

Optional

Optional

Page 41 of 53


2009-03-05

SECRET

Code

Descripti on

Quantity

11

04026813


Optional

12

04027102

04040007

14

04040045

15

04040117

16

04040148

17

04040149

18

04040150

At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option

Optional

13

19

04040151


Optional

20

04040201


Optional

21

04040285

04040286

23

04040287

24

04040288

25

04040289

26

04040418

27

04040671

At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option

Optional

22

Single Cable, 120ohm-75ohm Converter Box (With BNC Socket 14040083), 2*BNC75SF, 26UL2464(4C)B+PCB03022938) Single Cable, Straight Through Cable, 3.00m, MP8-I, CC4P0.5GY, MP8-I, Unshielded Trunk Cable, 0.30m, 120ohm, 4E1, 0.4mm, D25M, 4*120CC4P0.4P430U(S), 4*D15F Single Cable, Transit Cable, 0.3m, D100M, 4*100CC13P0.32P547U(S), 4*D50F-II, Quidway3680 Trunk Cable, For Transit, 3m, 75ohm, 8E1, 2.2mm, D68M-III, 2*SYFVZ75-1.2/0.25*8, 16*BNC75SM-V Trunk Cable, 20.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V Trunk Cable, 40.00m, 75ohm, 1E1, 2.2mm, D15M+Magnetic Ring17010171, 2*SYFVZ75-1.2/0.25, 2*BNC75SM-V Trunk Cable, G.703 Cable, 20.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Trunk Cable, G.703 Cable, 40.00m, 120ohm, 1E1, 0.4mm, D15M+Magnetic Ring17010171, 120CC2P0.4P430U(S), MP8-II Single Cable, USB Serial Port Cable, 1.835m, USBA, CC(1P0.32+2C0.5)PWG1U(S), USBB, Quidway Single Cable, Communication Cable, 3m, D200M, 32*CC8C0.32P296U(S), 16*D25M+16*D9M, 16AS Single Cable, V.35 Serial Port Cable, 3m, D200M, 8*CC(5P+8C)0.32P296U(S), 8*D34M+8*D34(PS), DTE Single Cable, V.35 Serial Port Cable, 3m, D200M, 8*CC(5P+8C)0.32P296U(S), 8*D34M+8*D34(PS), DCE Single Cable, V.24 Serial Port Cable, 3m, D200M, 8*CC7P0.32P296U(S), 8*D25M

28

04041054


Optional

Single Cable, V.24 Serial Port Cable, 3m, D200M, 8*CC7P0.32P296U(S), 8*D25F, Quidway R3680 Trunk Cable, Transit Cable, 3m, 120ohm, 8E1/8T1, 0.4mm, D68M, 8*120CC2P0.4P430U(S), 8*MP8-II Single cable-–48V feeder cable-2.2m-(D3 female-2 females 1 male)-(14UL2517(2C)PWG1U)-(2*cord end 2.5^2 blue)-MA5103 Single Cable, Shielding Straight Through Cable, 3.00m, MP8-IV, CC4P0.5P445U(S), MP8-IV

Huawei Confidential

Remarks

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Page 42 of 53


2009-03-05

SECRET

Code

Descripti on

Quantity

29

04041104


Optional

30

04041152

04041153

32

04041307

33

04041458

34

04041691

35

04041692

36

04042020

37

04042967

38

04042968

Single Cable,X.21 Serial Port Cable, 3m, D15M, CC7P0.32P296U(S), D50M-I, DTE

39

04042969

Single Cable,X.21 Serial Port Cable, 3m, D15F, CC7P0.32P296U(S), D50M-I, DCE

40

04042970

41

04042971

42

04042972

43

04043589

44

04043590

45

04043591

46

04043592

47

04043593

48

04043594

Single Cable,RS449 Serial Port Cable, 3m, D37F, 100CC13P0.32P296U(S), D50M-I, DCE Single Cable,RS449 Serial Port Cable, 3m, D37M-I, 100CC13P0.32P296U(S), D50M-I, DTE Single Cable,RS530 Serial Port Cable, 3m, D25M, 100CC13P0.32P296U(S), D50M-I, DTE Single Cable, V.24 Serial Port Cable, 3m, D25M, CC(5P+8C)0.32P296U(S), D28M, DTE Single Cable, V.24 Serial Port Cable, 3m, D25F, CC(5P+8C)0.32P296U(S), D28M, DCE Single Cable, V.35 Serial Port Cable, 3m, D28M, CC(5P+8C)0.32P296U(S), D34M+D34PS, DTE Single Cable, V.35 Serial Port Cable, 3m, D28M, CC(5P+8C)0.32P296U(S), D34F+D34PS, DCE Single Cable,X.21 Serial Port Cable, 3m, D15M, CC(5P+8C)0.32P296U(S), D28M, DTE Single Cable,X.21 Serial Port Cable, 3m, D15F, CC(5P+8C)0.32P296U(S), D28M, DCE

At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option

Optional

31

China Power Cable 250V10A 3m, I-Type3PIN Straight Plug /227IEC53(RVV)3x1mm^2Black/3PIN Straight Connector Trunk cable-transfer cable-0.30m-75ohm-4E1-2.6mm-(D25 male)-(SYYV75-2/0.34(S))-(4*D15 female) Single Cable, 8AS Cable (Mate RJ45 Jack), 0.5m, D68M, 8*CC8C0.32P296U(S), 8*MP8-III, 8040 External Power Cable, Chassis PGND, 3m, 3.3mm^2-G&Y, OT6-4, 12UL1015G&Y, Quidway Single Cable, 16AS Communication Cable, 0.5m, D200M, 16*CC8C0.32P296U(S), 16*MP8(S)-III, Single Cable, Communication Cable, 0.5m, D68M, 8*CC8C0.32P296U(S), 8*MP8-III, 8AS Single Cable, Communication Cable, 0.5m, D200M, 16*CC8C0.32P296U(S), 16*MP8-III, 16AS Single Cable, T1 Communication Cable (Matching RJ45), 3m, D15M, CC4P0.5P445U(S), MP8-II, 8040 Single Cable, Console Serial Port Cable, 3m, D9F, CC4P0.48B(S), MP8-VI

Huawei Confidential

Remarks

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Page 43 of 53


2009-03-05

SECRET

Code

Descripti on

Quantity

49

04043595

04043596

51

04043597

50

04043770

51

0404A00 Q

At customers' option At customers' option At customers' option At customers' option At customers' option

Optional

50

52

0404A00 R


Optional

53

0404A01 K

Single Cable,RS449 Serial Port Cable, 3m, D28M, 100CC13P0.32P296U(S), D37M-I, DTE Single Cable,RS449 Serial Port Cable, 3m, D28M, 100CC13P0.32P296U(S), D37F-I, DCE Single Cable,RS530 Serial Port Cable, 3m, D25M, 100CC13P0.32P296U(S), D28M, DTE Single Cable,RS530 Serial Port Cable, 3m, D25F, 100CC13P0.32P296U(S), D28M, DCE Trunk cable-swither-3.0m-75ohm-8E1-1.2mm-(D 68 male-III)-(2*SYFVZP75-1.2/0.25*8(S))-(16 *BNC75 straight male-V)-IMA Trunk cable-swither-3.0m-120ohm-8E1-0.4mm-( D68 male)-(8*120CC2P0.4P430U(S))-(8*netw ork port 8-bit II)-IMA Signal cable-switcher-(D25 female)-(network port 8-bit III)

Optional

54

0404A03 H

55

0404A04 2

56

0404A04 3

57

0404A04 4

58

0404A04 5

59

0404A04 8

60

0404A06 C

61

0404A06 D

62

0404A09 5

At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option At customers' option

63

0404A09 D

Optional

64

04060353

65

04060368


Single cable-RPS power cable-1m-(H2X7(4.20))-(18UL2464(14C))(H2X7(4.20))-AR2921 Single cable-trunk cable-3m-(D68 male-III)-(SYFVZ75-1.2/0.25*8)-(8*BNC75 straight male-V)-4E1-BNC Single cable-trunk cable-3m-(D68 male)-(8*28UL2464(2P)PWG1U-I)-(8*net work port 8-bit-VI)-8T1-RJ45 Single cable-trunk cable-3m-(D68 male)-(4*120CC2P0.4P430U(S))-(4*netw ork port 8-bit-II)-4E1-RJ45 Single cable-trunk cable-3m-(D68 male)-(4*28UL2464(2P)PWG1U-I)-(4*inter face port 8-bit-VI)-4T1-RJ45 Single cable-transit cable-0.5m-(interface port 8-bit-III)-(CC4P0.5 gray)-(interface port 8-bit-I)-ASE Single cable-transit cable-5m-(D50 male-VI)-(100CC32P0.4P430U(S))-(24*int erface port 6-bit-II) Single cable-transit cable-15m-(D50 male-VI)-(100CC32P0.4P430U(S))-(24*int erface port 6-bit-II) Single cable-SIC-8AS communication cable-0.28m-D60 male-8*CC8C0.32P296U(S)-(8*interface port 8-bit-III)-RJ45 female socket attached Single cable-telephone line-3m-(interface port 8-bit-)-(26UL20251-4C black)-(interface port 8-bit-II)-STP Single Cable, DS3 Video Cable, 15.00m, BNC75SM-V, SYFVZ75-1.2/0.25, SMB75SF-V, InfoLink DVS6000 External Power Cable, PGND, 3.00m,6mm^2-G&Y, OT6-8, 227IEC02-6^2G&Y, 2*OT6-6, NetEngine Huawei Confidential

Remarks

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Page 44 of 53


Code

66

04060414

67

14040202

68

14080099

Descripti on

SECRET

Quantity

Trunk Cable, DS3 Input & Output, 30.00m, At 75ohm, 2.2mm, BNC75SM-V, customers' SYFVZ75-1.2/0.25, SMB75SF-V, InfoLink option Coaxial Connector, BNC, 75ohm, At Straight/Socket, Dual, Female, Connected customers' With E1 Cable BNC Male Plug option Network interface At connector-8-bit/8PIN-unshielded-convertio customers' n socket-NO keyed option

Remarks Optional

Optional

Optional

Configuration description: 1. First, it should be clarified that the Quidway AR 19-1X series adopts a standard configuration in production and delivery; in other words, we only provide cables with the standard length, not the special length. There is no need for a field survey when selling through agents. However, a field survey is needed when selling together with other products of the company. In this case, the requirements raised should not be met through the list of the Quidway AR 19-1X series, and instead, such requirements should be accommodated through the configuration of other products. 2. The cables are closely related to the corresponding interface modules in the application. As for the distribution model of the agent, the configuration personnel can ignore the corresponding relation with the interface module. However, the marketing personnel need know the general application scenario for the regular cable. For bundling model and direct delivery to the users, you need know the corresponding cable selection for the correct interface module. 3. When the E1 cable with BNC connector on one end (and DB15 connector on the other), like 04026106, 04040148, 04040149, is selected, you still need to select two coaxial connectors (14040202) for each cable based on the 1:2 ratio. This is to facilitate the users or the customer service personnel to extend the length of the E1 cable. 4. When the E1 cable with RJ45 connector on one end (and DB15 connector on the other), like 04026104, 04026105, 04040150, 04040151, is selected, you still need to select one RJ45 connectors (14080099) for each cable based on the 1:1 ratio. This is to facilitate the users or the customer service personnel to extend the length of the E1 cable. 5. Note that for the Quidway AR 19-1X series, the host of the router has one AUX port and two Ethernet ports, however, no corresponding AUX port cable or Ethernet cable is in the host configuration. Therefore, proper AUX port cable and Ethernet cable need be considered in the solution design. 6. The types and quantities of the optional cables are related to the interface modules.

2009-03-05

Huawei Confidential

Page 45 of 53


SECRET

6

Configuration of External Cable Set of the Quidway AR 19-1X Series The Quidway AR 19-1X series can use the external optical fiber suite for the Quidway R2600&3600 series routers in the 8040 product family, and use the same suite of external optical fiber suite (04100053 external suite-Quidway3680 external optical fiber suite). The types and quantities of the optional optical fibers are related to the interface modules. Table 35

Fiber optical suite of the Quidway AR 19-1X series


2009-03-05

Code

Descriptio n

1

14130098

Patch Cord, SC/PC-SC/PC, Single-mode, 3mm, 5m

2

14130126

3

14130127

4

14130134

5

14130141

6

14130153

7

14130156

8

14130176

9

14130195

10

14130197

11

14130199

12

14130221

13

14130222

14

14130248

15

14130251

16

14130253

Quantity

At customers' option Patch Cord, SC/PC-SC/PC, Single-mode, At 3mm, 15m customers' option Patch Cord, SC/PC-SC/PC, Multi-mode, At 3mm, 15m customers' option Adapter, SC-SC, 2, Blue, Shell:Plastic, At Sleeve:Zirconia, Square customers' option Patch Cord, SC/PC-SC/PC, Multi-mode, At 3mm, 2m customers' option Patch Cord, FC/PC-SC/PC, Multi-mode, At 3mm, 10m customers' option Patch Cord, SC/PC-SC/PC, Multi-mode, At 3mm, 5m customers' option Patch Cord, SC/PC-SC/PC, Single-mode, At 3mm, 2m customers' option Patch Cord, LC/PC-LC/PC, Single-mode, At 2mm, 5m customers' option Patch Cord, FC/PC, LC/PC, Single-mode, At 2mm, 10m customers' option Patch Cord, LC/PC-LC/PC, Single-mode, At 2mm, 10m customers' option Patch Cord, FC/PC, LC/PC, Multi-mode, At 2mm, 10m customers' option Patch Cord, LC/PC-LC/PC, Multi-mode, At 2mm, 10m customers' option Adapter, LC/PC-LC/PC, 2, Blue, At Shell:Plastic, Sleeve:Zirconia, Square customers' option Patch Cord, LC/PC-LC/PC, Single-mode, At 2mm, 20m customers' option Patch Cord, FC/PC-SC/PC, Single-mode, At 3mm, 10m customers' option Huawei Confidential

Remarks Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Optional

Page 46 of 53


2009-03-05

Code

Descriptio n

17

14130295

Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 20m

18

14130296

Patch Cord, LC/PC-LC/PC, Multi-mode, 2mm, 5m

Huawei Confidential

SECRET

Quantity At customers' option At customers' option

Remarks Optional

Optional

Page 47 of 53


7

SECRET

Configuration Examples The interfaces of the AR 19-1X router involved in this manual are simple, so the configuration examples are omitted.

2009-03-05

Huawei Confidential

Page 48 of 53


8

SECRET

Configuration FAQ

8.1 Although the routers have standard configurations without the need of on-site survey, in some of the bundled sales contracts, survey report is needed and some special requirements on the cable length are specified, especially the E1 cable. How to handle it? Although we have emphasized repeatedly that the delivery of the mid-range-and-low-end routers should be prepared in standard configuration, however, in the tie-in sales, on-site survey is needed, and some special requirements may be posed. Here mainly concerns the cable length requirement. Take the length of the E1 cable as an example. The standard lengths of the cables we provided are 3m, 20m, and 40m. If the users require the length of 10m or 50m, the requirement cannot be satisfied in the product list directly. One end of the E1 cable of the router is always DB15, and the other end may be BNC or RJ45 according to the actual needs. Generally, unlike other products, this router cannot adopt the method of directly extending the length of the E1 cable. Here we suggest the following methods: We have mentioned in the earlier section of the configuration manual that when the E1 cable with BNC connector on one end (and DB15 connector on the other), like 04026106, 04040148, 04040149, is selected, you still need to select two coaxial connectors (14040202) for each cable based on the 1:2 ratio. This is to facilitate the users or the customer service personnel to extend the length of the E1 cable. When the E1 cable with RJ45 connector on one end (and DB15 connector on the other), like 04026104, 04026105, 04040150, 04040151, is selected, you still need to select one RJ45 connectors (14080099) for each cable based on the 1:1 ratio. This is to facilitate the users or the customer service personnel to extend the length of the E1 cable." The addition of the two connectors 14040202 and 14080099 is to facilitate the extension of the length of the E1 cable. For non-standard E1 cable, it is necessary to solve it by adopting standard length cable + connector + customized length of cable. The connection relationship is shown in the following figure. Figure 13 Extension of 75Ω E1 cable DB15 SMA-SMB

Cable 1

Router

DDN BNC male

BNC male BNC connector Cable 2 （14040202）

Cable 1 is the standard item in the configuration list, cable 2 is the non-standard cable, while BNC is the connector to connect cable 1 and cable 2. When the 75 Ω E1 cable is used, the receiving/transmitting lines are separated, and therefore, two BNC connectors are needed.

2009-03-05

Huawei Confidential

Page 49 of 53


SECRET

Figure 14 Extension of 120Ω E1 cable DB15 SMA-SMB

Cable 1

Router

DDN RJ45 connector

RJ45 connector

RJ45 connector （14080099）

Cable 2

Cable 1 is the standard item in the configuration list, cable 2 is the non-standard cable, while RJ45 is the connector to connect cable 1 and cable 2. When the 120 Ω E1 cable is used, only one RJ45 connector is needed.

8.2

The users complain that there is not any document in the package of the newly purchased E1 voice module, so they do not know how to use it. As the host and the modules of a router are all ATO items (AI) and are delivered separately, each module has a packing box of itself, and in international deliveries, there are multiple types of SIC interface modules and two types of ESM modules. The varieties will keep increasing in the future. At first, we considered including corresponding documents in the packing boxes of the modules, but this would add 20 codes. Meanwhile, we see that the sales of all the routers including the modules are through the distributors, who will assemble and test the routers. Therefore, the products are not sent to the users directly. On the other hand, we have considered the consistency of the installation of the modules as much as possible. In other words, different types of the modules do not lead to significant difference in the installation methods. Besides, the modules will not be used without the host, and we have already included detailed installation manuals and CD-ROMs as accessories to the host in the delivery, which contains the installation and usage instructions for all the modules and software features. We are also watching on this issue and evaluating the impact of the current method in actual operations. In the future, we may add one more CD-ROM in the package containing some necessary information for all the modules, but this will increase the cost.

8.3

The optical fibers that the marketing personnel promised to the customers are too long that we cannot find them in the configuration list. How can we do with it? The same is as the configuration of the E1 and other cables. Generally, the configuration of the mid-range-and-low-end routers has only standard optical fibers, without the on-site survey. However, in some cases, on-site survey is needed. In this case, the length of the fiber optical fibers in the list may not be able to meet the requirements of the contract. In this case, you need to follow the Configuration Specifications of Ultra-long Haul Optical Fibers of Datacom Products of the company. Parts of the specifications are as follows: In the order, it should follow strictly the optical fiber length and connectors specified in the on-site survey and make them optional items in the configuration list. If there are no suitable items in the optical fiber suite, follow the principles below for configuration. 2009-03-05

Huawei Confidential

Page 50 of 53


SECRET

1. If the optical fibers and connectors specified in the on-site survey are within the configuration list, but the types are not right, the upward principle is adopted, with deviation of less than 5m. For example, if the survey requires Optical connector-MTRJ-2SC/PC-multi-mode-2mm parallel-45m However, in the actual list, there connector-MTRJ-2SC/PC-multi-mode-2mm-parallel-50m

is

14130243

Optical

Then, you may choose 14130243. 2. The connectors that the survey report requires are in the list, but the length is not right. The deviation is over 5m and the upward principle is adopted. The delivery configuration should use the code that best fits the length as much as possible, specifying the actual length needed so that the coordinator can notify the purchasing personnel to make special purchases. 3. The length of the fibers that the survey requires is in the list, but the fiber connectors are not right. In the delivery configuration, the code of the length should be used in placing an order, but right types of fiber connectors should be specified so that the coordinator can notify the purchasing personnel to make special purchases. 4. All datacom products (including international delivery) should follow the requirements in 1, 2, and 3 above. If they are in conflict with the configuration manual, these requirements should be obeyed. When the configuration manual is upgraded, revisions should be made to the manual according to these requirements.

2009-03-05

Huawei Confidential

Page 51 of 53


SECRET

9 Appendix: Slot Restriction for Host Interface Card Users are recommended to consult the table below for the interface module configuration when using Quidway AR 19-1X series routers. Note

√ means the router can support the interface card or the i nterface module. × means the router cannot support the i nterface card or the interface module.

9.1

SIC/DSIC Configuration Table Table 36

SIC/DSIC configuration table of the Quidway AR 19-1X series

Inter face Modu le Type

19-10/19-10-W

19-13-I/19-15-I

19-13-IW/19-15-I W

RT-SIC-1GEC RT-SIC-4FSW RT-DSIC-9FSW RT-SIC-1VE1

×

×

×

×

[1]

RT-SIC-1BS-V2 RT-SIC-1BU-V2 RT-SIC-1BSV RT-SIC-2BSV RT-SIC-1FEF RT-SIC-2FXS1FXO RT-SIC-1FEA RT-SIC-1SAE RT-SIC-1E1-F RT-SIC-EPRI RT-SIC-1FXS-V2 RT-SIC-2FXS-V2 RT-SIC-1FXO-V2 RT-SIC-2FXO-V2 RT-SIC-1ADSL-I RT-SIC-1ADSL RT-SIC-1AM-V3 RT-SIC-2AM-V3

×

Note: z

z

2009-03-05

√: The item ticked (√) without special description means the slot supports the function. [1]: If RT-SIC-1VE1 cannot be supported without VPM, the VPM must be added.

Huawei Confidential

Page 52 of 53

Quidway AR 19-1X Router Hardware Configuration Manual _Overseas Version_V1

Recommend Documents