CONVEYOR BELTS 2nd edition
SEMPERIT®, SEMPERTRANS® and all other brand and product names or logos cited in this catalogue are commercial or registered trademarks of Semperit® and its subsidiaries in the United States, in the countries of the European Union and/or in other countries, protected worldwide. The absence of a logo or of a brand or product name from this list does not mean that Semperit® has relinquished the registering of a trademark or any other intellectual property right regarding this name or this logo. They may not be used without the owner’s written permission. 2nd edition Subject to any changes.
The Austrian group SEMPERIT AG is one of the leading manufacturers in the development, manufacturing and marketing of manufactured rubber and plastic. Founded in 1824, the company is one of the oldest European manufacturers. Long experience, state-of-the-art technologies and high production capacity guarantee our customers excellent quality in terms of products and services. Within the group, the activity of the SEMPERTRANS division is devoted solely to conveyor belts.
> More than 50 years’ experience in conveyor belt technology
SEMPERTRANS® has been developing, manufacturing and installing conveyor belts for more than 50 years. Its knowhow, its experience and the quality of its products make SEMPERTRANS® one of the world’s leading companies in its field.
> A complete range of products to meet all your conditions of use
Our desire to meet your needs and expectations has led us to develop a range of high-tech products to meet the most extreme conditions of use. • Textile carcass conveyor belts • Textile and metal carcass conveyor belts • ST type metal carcass conveyor belts • Multi-layer metal carcass conveyor belts • Conveyor belts for specific applications applications Our commitment: to optimise your performances through a product adapted to your specific technical requirements and standards.
> A reference in numerous sectors of activity
SEMPERTRANS®’s know-how as a manufacturer of conveyor belts is internationally recognised in the following sectors: • Mining • Iron and steel industry • Cement works • Port installations • Thermal power plants • Foundries and glassworks • Quarries and sandpits
> Personnel attention to your requirements
Our sales representatives and our engineers are at your disposal to advise you and assist you, from the study phase and complete, detailed design of your projects through to start-up assistance and training of your maintenance personnel.
> Quality commitment
SEMPERTRANS® is fully geared to satisfying its customers. We have ISO 9001 certification and guarantee you product and service quality meeting world standards. Constant checks are therefore made during manufacturing and tests are conducted in laboratories and on test benches.
> A worldwide network of professionals at your service
In order to be as close as possible to its customers, SEMPERTRANS® has developed a network of professionals around the world. They are at your disposal to offer you the advice and service necessary for optimising the functioning of your conveyors.
3
MINES For more details on the choice of the cover grade according to the product conveyed, refer to page 68.
T N A T S I S E R N O I S A R B A
Transply Multiply Multitrans PP textile belts Rip-stop Metalcord Metaltrans ST/Sempercord
T E N A M T S A L I F S E R
Transflam
T T N A A T E S H I S E R
Transtherm
E S A T E N R A G T D S I S N A E R L I O
Transoil Translev EDG S
HEAVY INDUSTRY
d n d ro n a o r I a l rg y i c c a g / g s / l e r g r n e o s c k a g i n n g y ty o k ie s s s t r t y ry e l i i o t e i i i m r s w l l v v e e i i d d t t t t a a h y y a y y c lc l i n ng l i c ic C d d u o a c s s t r tr a i n n / P a e n o u n en l i n n d F o l e c t r tr e c i n n d u G r a P o r t t E l r e C e m S a l t te l s e t
GENERAL INDUSTRY s ss G l a
k s w o r a r c c i l l g b b S u g P uu
r a p e P a
ie s t s t/s a r r i r e Q u a d p i o o d a n d s a W
Transprofil Translev S N O I T A C I L P P A L A I C E P S
Autostable Biathlon/Triathlon Pipecord/Pipetrans Squarebelt Roughtop Transunit Transglis Transrigid 4
2nd edition. Subject to any changes.
CONTENTS 1
ABRASION RESISTANT
Transply Multiply Multitrans or EP PP textile belts Rip-stop Metalcord Metaltrans ST/Sempercord
6 8 10 14 18 20 24 28
2
FLAME RESISTANT
Transflam
36
3
HEAT RESISTANT
Transtherm
38
4
OIL AND GREASE RESISTANT RESISTANT
Transoil Translev EDG S
42 44
5
SPEECI SP CIAL ALIS ISEED APPL APPLIC ICA ATI TIO ONS
Ste teep ep gra gradi dien ents ts
Transprofil
46
Elevator
Translev
48
Self-centring
Autostable
50
Impact resistant
Biathlon/Triathlon
56
Tube conveyor
Pipecord/Pipetrans Squarebelt
58 60
Isolated load
Transunit/Roughtop Transglis
62 64
Rigid weft
Transrigid
65
6
TECHNICAL INFORMA INFORMATION TION
2nd edition. Subject to any changes.
Grade and characteristics of covers Resistance of covers to products conveyed Minimum diameter of pulleys Tension travel required Trough transition length Radii of cur vature Belt turnover Maxi Ma ximu mum m cle clear aran ance ce of ca carry rryin ingg idl idler erss and and re retu turn rn ro rollller erss Maximum roller skirt spacing Splicing 5
66 68 76 80 82 84 86 87 87 88
TRANSPLY TWO-PLY BELT – STANDARD APPLICATION E C N A T S I S E R N O I S A R B A
The TRANSPLY range offers an elastic assembly which absorbs shocks and excess tensions by means of its built-in shock absorbing pad. The TRANSPLY structure consists of two plies (polyester warp / polyamide weft) with an rubber backing. For conveying of products <80°C.
Areas of application The TRANSPLY range guarantees optimum service for conveying of cold and neutral bulk products in light uses.
• Quarries • Sand pits • Concrete mixing plants • Cement works • Thermal power plants • Foundries • Sugar factories • Salt works
Main qualities of TRANSPLY belts • Rot-proof carcass • D grade cover (superior quality anti-abrasive): resists acids when cold and corrosive salts. Abrasion loss as per NFT 46012, ISO 4649, DIN 53516, average value 100 mm 3. • Accepts low pulley diameters and reduced tension travels.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
6
TRANSPLY
STANDARD RANGE DESIGNATION
TRANSPLY 250/2 TRANSPLY 315/2 D (superior quality anti-abrasive) 3+1.5 4+2 4+2
Grade Thickness (mm) Rated width (mm) 500 650 800 The above range corresponds to our standard range. On order, manufacturing is possible: • in widths of up to 1200 mm • in specific cover thicknesses • in most of the cover grades specified on pages 66 and 67 • in belts with moulded edges Remark: Manufacturing minimum for belts not in stock: 200 m 2. SIZE AND WEIGHT CHARACTERISTICS DESIGNATION TRANSPLY 250/2 Cover thickness (mm) 3+1.5 4+2 Total thickness (mm)* 6.4 7 .9 2 Weight (kg/m )* 8.1 9 .8
banda con cantos cortados
TRANSPLY 315/2 4+2 8 10
* approximate values given for information.
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
7
E C N A T S I S E R N O I S A R B A
MULTIPLY THREE-PLY BELT – STANDARD APPLICATION E C N A T S I S E R N O I S A R B A
The MULTIPLY range is used for conveying all cold (<80°C) and neutral materials in all extraction and transformation industries in which the working conditions are light.
Areas of application The MULTIPLY range guarantees optimum service for conveying of cold and neutral bulk products in light uses.
• Quarries • Sand pits • Concrete mixing plants • Cement works • Thermal power plants • Silos • Foundries • Sugar factories • Salt works Main qualities of MULTIPLY belts • Rot-proof carcass • D grade cover (superior quality anti-abrasive): resists acids when cold and corrosive salts. Abrasion loss as per NFT 46012, ISO 4649, DIN 53516, average value 100 mm 3. • Accepts low pulley diameters and reduced tension travels.
The MULTIPLY range offers an elastic assembly with reinforcement protected by a D grade cover (superior quality anti-abrasive). The MULTIPLY structure consists of three EP (polyester warp / polyamide weft) synthetic fabric plies with a rubber interface.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
8
MULTIPLY
STANDARD RANGE DESIGNATION
MULTIPLY 400/3 D (superior quality anti-abrasive) 4+2
Grade Thickness (mm) 3+1.5 Rated width (mm) 500 600 650 800 1000 The above range corresponds to our stock range. On order, manufacturing is possible: • in widths of up to 1400 mm • in specific cover thicknesses • in most of the cover grades specified on pages 66 and 67 Remark: Manufacturing minimum for belts not in stock: 200 m 2. SIZE AND WEIGHT CHARACTERISTICS DESIGNATION Cover thickness (mm) 3+1.5 Total thickness (mm)* 6.9 Weight (kg/m2)* 9
MULTIPLY 400/3 4+2 8.4 10.3
6+2
Stock with cut edges Stock with moulded edges
6+2 10.4 12.3
* approximate values given for information.
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Station spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
9
E C N A T S I S E R N O I S A R B A
MULTITRANS or EP For average to severe working conditions E C N A T S I S E R N O I S A R B A
Our MULTITRANS range is used for conveying all types of materials, in bulk, cold (<80°C) and neutral, in all extraction and transformation industries, under average to severe working conditions.
Areas of application • Quarries/sand pits (grain size < 400 mm) • Thermal power plants (coal, ash) • Cement works (quarry materials, added materials, cold clinker) • Fertiliser factories / Chemical plants (non chemically aggressive materials) • Port installations (ores, coal, phosphates) • Mining/Iron and Steel Industry (ores, coke, added materials) • Paper mills (wood, edgings) • Salt marshes / Salt works • Sugar factories (sugar beet and sugar beet chips) • Glassworks (raw materials, cullet)
Our MULTITRANS belt consists of 3 to 5 EP (polyester warp and polyamide weft) synthetic fabric plies with a rubber interface, the thickness of which varies according to the type. • The low-elongation polyester fibres are used in the warp direction to reduce the length of the tension travels • The more elastic polyamide fibres are used in the weft, to ensure good troughing. • The carcass is protected by covers of D grade (superior quality anti-abrasive) which is recommended for very abrasive products and sharp materials (Abrasion loss as per NFT 46012, ISO 4649 and DIN 53516, average value 100 mm3). These belts can also be produced with X, Y or Z cover grades standardised as per DIN 22102.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
10
MULTITRANS or EP
Designation • The usual designation of MULTITRANS or EP is as shown in the example below:
Rated width of belt (mm) Carcass Rated breaking strength in warp direction (N/mm) Number of plies of fabric Thickness of top cover and bottom cover (mm) Cover grade: superior anti-abrasive
Multitrans 1600 or EP 1250/ 4 8+3 D
• The type of belt (rated breaking strength in N/mm) is obtained by superimposing plies of fabric: TYPE N/mm
Number of plies
500
630
800
1000
1250
1600
3 4
3 4 5
3 4 5
3 4 5
3 4 5
4 5
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
2000 2500 3150
4 5
5
5
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
11
E C N A T S I S E R N O I S A R B A
MULTITRANS or EP
SEMPERTRANS® standard RANGE, Cover of grade D (superior quality anti-abrasive), X, Y or Z (as per DIN 22102) E C N A T S I S E R N O I S A R B A
DESIGNATION
NUMBER OF PLIES
RATED WIDTH
MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP MULTITRANS or EP
: Standard
: Contact us
The range indicated in this table is our standard range. On order, manufacturing is possible: - in specific cover thicknesses of 3+1.5 to 15+10 Recommendedd cover pairs: 3+1.5, 4+2; 5+1.5, 6+2, 8+3, 10+4, 12+5 Recommende - in belts with moulded edges or cut edges - in all the cover grades specified on pages 66 and 67. Note: certain cover grades are not compatible with all the above constructions. For further information, consult our technical departments. Remark: manufacturing minimum for belts not in stock: 2 x 200 m for belts of width less than or equal to 800 mm, 1 x 200 m for belts of width greater than 800 mm. IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
12
MULTITRANS or EP
THICKNESSES AND WEIGHTS
Designation
Carcass designation
Carcass weight [kg/m2]
Carcass thickness [mm]
3EP160
4 .3
3 .1
3EP200
4 .5
3 .6
For other cover grades, consult our technical departments for MULTITRANS or EP 630/4 the weight and thickness.
4EP160
5 .5
4 .8
MULTITRANS or EP 800/3
3EP250
5 .3
4 .4
MULTITRANS or EP 800/4
4EP200
6 .1
4 .8
MULTITRANS or EP 800/5
5EP160
6 .9
6 .1
MULTITRANS or EP 1000/3
3EP315
6 .2
5 .0
MULTITRANS or EP 1000/4
4EP250
7 .1
6 .0
MULTITRANS or EP 1000/5
5EP200
7 .6
6 .1
MULTITRANS or EP 1250/3
3EP400
6 .7
5 .6
MULTITRANS or EP 1250/4
4EP315
8 .3
6 .8
These values are given for information.
MULTITRANS or EP 1250/5
5EP250
8 .9
7 .6
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
MULTITRANS or EP 1600/4
4EP400
9 .0
7 .6
MULTITRANS or EP 1600/5
5EP315
10.4
8 .6
MULTITRANS or EP 2000/4
4EP500
11.4
9 .2
MULTITRANS or EP 2000/5
5EP400
11.2
9 .6
MULTITRANS or EP 2500/4
4EP630
13.4
11.6
MULTITRANS or EP 2500/5
5EP500
14.3
11.6
MULTITRANS or EP 3150/5
5EP630
16.7
14.6
The approximate thicknesses and weights of the belts can be determined from the enclosed tables giving: MULTITRANS or EP 500/3 • the thickness and the weight of the carcass • the density of the various standard anti-abrasive anti-abrasive covers MULTITRANS or EP 630/3
Cover
D X Y W Z
Weight in kg/m2 for 1 mm of rubber 1.15 1.11 1.12 1.12 1.12
Approximate values given for information.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
13
E C N A T S I S E R N O I S A R B A
PP textile belts POLYAMID POLY AMIDEE / POLY POLYAMI AMIDE DE E C N A T S I S E R N O I S A R B A
These PP textile belts are generally used in extraction and transformation industries for conveying bulk material of large grain size at temperatures between -25°C and +60°C.
Areas of application
• Open-pit coal mines (conveying of overburden, coal and aggregates) • Open-pit mineral mines (lime, phosphates phosphates,, various ores) • Treatment of minerals • Iron and steel industries • Cement works (quarry materials and transformation) • Paper mills • Port installations • Public works • Agriculture • Sugar factories • Thermal power plants • Quarries and sand pits
Top cover Our PP textile belt consists of rubber covers and moulded edges and a textile carcass. The carcass has a multiply structure comprising 2 to 5 plies of PP (polyamide warp and weft) synthetic fabric. A layer of skim gum covers each ply.
Textile carcass Bottom cover
The covers protect the carcass against damage, adverse weather conditions and biological and chemical aggressions. The role of the carcass is to transmit the longitudinal forces and absorb the dynamic forces generated by the falling and conveying of the material. These PP textile belts are produced with cover grades W, X, Y and Z complying with standard DIN 22102 or antiabrasive cover grade D.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
14
Designation • The usual designation of PP textile belts is as shown in the example below:
1800
Rated width of belt (mm) Carcass (P = polyamide fabric in warp and in weft) Rated breaking strength in warp direction (N/mm) Number of plies of fabric Thickness of top cover and bottom cover (mm) Cover grade: W, X, Y or Z as per standard DIN 22102
P
2000/ 4 10+5 Y
• The type of belt (rated breaking strength in N/mm) is obtained by superimposing plies of fabric: TYPE N/mm
Number of plies
400
500
630
2
2
2 3
800 1000 1250 1400 1600 1800 2000 2500 3150 3500
2 3 4
2 3 4 5
2 3 4 5
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
3 4
4 5
5
4 5
4 5
5
5
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
15
E C N A T S I S E R N O I S A R B A
SEMPERTRANS® standard RANGE, cover of grade W, X, Y or Z (as per DIN 22102) or D (anti-abrasive). E C N A T S I S E R N O I S A R B A
Belt
P P P P P P P P P P P P P P P P P P P P P P P P P P P P
400/2 500/2 630/2 630/3 800/2 800/3 800/4 1000/2 1000/3 1000/4 1000/5 1250/2 1250/3 1250/4 1250/5 1400/3 1400/4 1500/5 1600/4 1600/5 1800/4 1800/5 2000/4 2000/5 2500/4 2500/5 3150/5 3500/5
Carcass Carcass construction weight Kg/m2
2 P 200 2 P 250 2 P 315 3 P 200 2 P 400 3 P 250 4 P 200 2 P 500 3 P 315 4 P 250 5P 200 2 P 630 3 P 400 4 P 315 5 P 250 3 P 400 4 P 315 5 P 315 4 P 400 5 P 315 4 P 400 5 P 315 4 P 500 5 P 400 4 P 630 5 P 500 5 P 630 5 P 750
3.1 3.5 4.2 4.6 4.0 5.3 6.2 5.3 6.2 7.1 7.7 6.1 6.1 8.1 8.8 6.5 8.6 10.4 8.1 10.4 8.1 10.7 10.5 10.1 12.2 13.2 15.3 17.6
Carcass thickness 5 6 6 mm 0 0 5 0 0 0
2.6 2.8 3.6 4.1 3.2 4.4 5.6 4.6 5.6 6.0 7.1 5.4 5.0 7.6 7.6 5.6 7.6 9.6 6.8 9.6 6.8 9.6 9.6 8.6 11.2 12.1 14.1 14.6
o o o o o o o o o o
o o o o o o o o o o
o o o o o o o o o o
8 1 0 0 0 0 0 o o o o o o o o o o
o o o o o o o o o o o o o o o o o o o o o o
RATED RATE D WI WIDT DTH H 1 1 1 1 2 4 6 8 0 0 0 0 0 0 0 0 o o o o o o o o o o o o o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o o o o o o o o o o o o o
(mm) (mm) 2 2 2 2 2 0 2 2 4 5 0 0 5 0 0 0 0 0 0 0
2 8 0 0
o
o
o
o
o
o
o o
o o
o o
o o
o o
o o
o o o
o o o
o o o
o o o
o o o
o o o
o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o
o o o o o o o o o o o o o o o o
The thicknesses and weights of the carcasses are given for information.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
16
For the possible cover thicknesses, please consult our technical department. Manufacturing is possible with other cover grades. See cover range on pages 66 and 67 or consult our technical department. THICKNESS AND WEIGHT
The thicknesses and weights can be evaluated from the table below for the thickness and weight of the carcass and the table below gives the density of the standard covers. Cover Weight in Kg/m2 for 1 mm of gum
W 1.12
X 1.11
Y 1.12
Z 1.12 Values given for information
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Station spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
17
E C N A T S I S E R N O I S A R B A
RIP-STOP THE BEST OF TEXTILE AND METAL E C N A T S I S E R N O I S A R B A
The RIP STOP range combines the convenience of a textile belt with the strength of steel, owing to its multiply structure equipped with a metal shield in the top cover. This belt is available from type 500/3 to type 3150/5.
Areas of application The RIP STOP range enables increased belt service life under severe working conditions: • Quarries • Glassworks • Cement works • Thermal power stations • Foundries • Sugar factories • Iron and steel industry
Metal shield
The RIP STOP range consists of woven fabric plies (polyester warp/polyamide warp/polya mide weft) with a rubber interface. This carcass is protected by an anti-shock metal shield consisting of steel cords incorporated in the top cover. The standard cover is a superior-quality anti-abrasive D grade cover. cover. Product temperature < 80°C. It is also possible to manufacture these belts in grade X, Y or W as per DIN 22102. For the other cover grades, please consult our technical departments. Main qualities of RIP STOP belts
• Better distribution of shocks and carcass protection • Anti-tear qualities without any equivalent in textile belts • Exceptional fastener strength
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
18
RIP-STOP
STANDARD RANGE DESIGNATION DESIGNATION Cover
Rated width (mm)
Grade Thickness (mm) 1000 1200
RIP STOP 500/3 D (superior quality anti-abrasive) 10+3
On order, manufacturing is possible: • in widths of up to 2000 mm • in most of the cover grades specified on pages 66 and 67 • in all cover thicknesses: from 6+2 to15+10mm • in all types: from 500/3 to 3150/5 N/mm Remark: Manufacturing minimum for belts not in stock: 200 m 2 SIZE AND WEIGHT CHARACTERISTICS DESIGNATION DESIGNA TION RIP STOP 500/3 cover thickness (mm) 10+3 total thickness (mm) 16.7 2 weight (kg/m ) 20.6
The range shown opposite is our standard range. The whole range specified in our MULTITRANS catalogue can be produced in a RIP STOP version.
* for non-standard belts, use the values indicated in our MULTITRANS range and add 1.2 kg/m2 corresponding to the metal shield.
Approximate values given for information.
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
19
E C N A T S I S E R N O I S A R B A
METALCORD 2 WEFTS E C N A T S I S E R N O I S A R B A
SEMPERTRANS ® offers you an INCOMPARABLE and UNRIVALLED STRUCTURE: THE METALCORD RANGE More than 40 years of know-how
METALCORD belts are manufactured with two types of
We guarantee excellent rubber penetration and high adhesion values. Our open type cord design, our expertise in chemical adhesion between cords and rubber and our 40-bar vulcanisation process process give the belt very high cord adhesion.
carcass (warp cords and weft cords): - Carcass with elastic M warp cords (4x7 construction), strong impact resistance, particularly suitable for: • conveyors with small pulley diameters • curved conveyors with small radii • severe conditions of use • frequent stopping and starting
Only the METALCORD belt has its own carcass, with 3 layers of metal cords (cords of variable elasticity). This type of construction presents various advantages. These include: • excellent cord/rubber adhesion • resistance to repeated shocks • resistance to penetration • ability to eject foreign bodies • limiting of longitudinal cuts and tears • possibility of total wear of covers • aptitude for winding on small pulley diameters • aptitude for accepting small convex radii of curvature • good efficiency at joint • possibility of fastener jointing • easy emergency repairs
- Carcass with reduced-elasticity E warp cords (7x7 construction), high breaking strength, particularly suitable for applications with conveyors with large centre distances. Our weft cords are specially designed (ten times more elastic than the warp cords) and enable very good troughing whatever the width of the belt. Example: 35° trough, width 800 mm, type 2250 N/mm. - Belt complying with standard EN ISO 15236
Elongation (%)
STANDARD CURVE OF CORDS extracted from vulcanised belts
Weft CORD 1.4
M CORD 0.6
E CORD 0.2
10 IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
20
30
% of breaking load
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
20
METALCORD WITH D GRADE COVER (superior quality anti-abrasive)
METALCORD
CARCASS
- ELASTIC CORDS M: construction 4x7
E C N A T S I S E R N O I S A R B A
elongation under reference load: 0.4 to 0.6 % DESIGNATION METALCORD M 2TA (2 steel wefts) Type (N/mm) 500 630 800 1000 1250 1400 1600 1800 2000 ø 2.85 mm ø 3.8 mm
- MEDIUM ELASTIC CORDS E: construction 7x7, 7x19
elongation under reference load: 0.2 to 0.3 %
DESIGNATION METALCORD E 2TA (2 steel wefts) Type (N/mm) 800 1000 1250 1400 1600 1800 2000 2250 2500 2800 3150 3500 4000 ø 3.1 mm ø 3.7 À 8.6 mm* * Diameter and pitch of cords as per customer request
POSSIBLE CONSTRUCTIONS OF WEFTS
In accordance with your needs, our Design Office can offer you variants derived from the METALCORD METALCORD range: METALCORD 2 TA
2 TA/S
METALCORD 2 TN
2 TA TA 2 stee steell wef wefts, ts, cov cover er me measu asured red ab above ove the weft 2 TA/S TA/S 2 stee steell breake breakers rs includ included ed in the the covers covers
1: Top cover
2: Carcass
2 TN
2 TN/T
2 TA
2 TN 2 poly polyam amide ide we wefts fts,, cover cover me meas asure uredd abov abovee the the weft weft 2 TN/T 2 poly polyamid amidee breakers breakers included ncluded in the he covers covers
3: Bottom cover
COVER PAIRS (type, standard, as per customer request, min.) Type (N (N/mm) 500 630 800 1000 1250 1400 1600 1800 2000 2250 2500 2800 3150 2500 4000
Standard As per request
4+3, 6+3, 8+3, 10+4, 12+5 Min. 4+3
Min. 4+4
Min. 5+5
WIDTH Possibility of supply in all widths, from 600 mm to 2000 mm. For larger widths, consult us.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
21
METALCORD
CARCASS E C N A T S I S E R N O I S A R B A
Type (N/mm)
500 Carcass thickness (mm) 5.6 Carcass weight 9.5 (Kg/m2)
METALCORD M 2TA (2 steel wefts) 630 800 1000 1250 1400 1600 1800 2000 5.6 5.6 5.6 5.6 5.6 5.6 7.4 7.4
10
10.7 11.6 12.5 12.8 13.1 15.9 16.5 Values given for information
METALCORD E 2TA (2 steel wefts) Type (N/mm) 800 1000 1250 1400 1600 1800 2000 2500 2800 3150 3500 4000 Carcass thickness (mm) 6.6 6.6 6.6 6.6 6.6 6.6 6.6 8 9 9.5 10.8 11.8 Carcass weight 12.6 12.6 13 13.5 14.2 14.9 15.7 19.5 22 24.1 26.9 30 (Kg/m2) Values given for information
• For manufacturing with nylon wefts (2TN), take away approximately 1 kg/m from METALCORD 2TA. 2
COVER METALCORD belts can be produced in most of the cover grades of our standard range. See details of characteristics on pages 66 and 67. DENSITY OF VARIOUS STANDARD COVERS Cover D X Y W Weight in Kg/m2 for 1 mm 1.15 1.11 1.12 1.12 of gum
J2/K CR TEA TEB CW
G
GM JG J G M JG F
1.20 1.33 1.12 1.07 1.20 1.15 1.13 1.21 1.27 Values given for information
CROWN OF PULLEYS. M CORD BELT On a trough type conveyor, M cord belts function correctly without a crown. However, on conveyors with a small centre distance, the crown is an effective element for the centring of a belt. It is in this case tolerated with the limits f<0.01 x pulley diameter. E CORD BELT Crown prohibited in all cases. TECHNICAL SPECIFICATIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
22
METALCORD
ADVANTAGES Usually, all metal belts have a single layer of cords in the warp direction, but only METALCORD has its own carcass with three layers of rubber-core impregnated metal cords (cords of variable elasticity). This type of construction presents various advantages. These include: OUR PERFORMANCES • excellent cord/rubber adhesion • resistance to repeated shocks • resistance to penetration • ability to eject foreign bodies • limiting of longitudinal cuts and tears • possibility of total wear of covers • aptitude for winding on small pulley diameters • aptitude for accepting small convex radii of curvature • good efficiency at joint • possibility of stapling
YOUR INTERESTS • long belt service life • saving on maintenance • better stability • safe use • quick repair • increased productivity
SHOCK ENERGY (in Joules) This criteria is always very difficult to evaluate, but the values shown below can be considered to be indicative.
TYPE Metalcord 2TA 6+3 Metalcord 2TA 8+3 Metalcord 2TA 12+5 Metaltrans 1TA 6+3 TYPE Metalcord 2TA 6+3 Metaltrans 1TA 6+4
M500 1200
800 E800 1200 900
M630 1700
900
ELASTIC CORDS M M800 M1000 M1250 M1400 2000 2900 3700 4000 4000 5000 6000 6500 8000 1100 1500 2000 2500
AVERAGELY ELASTIC CORDS E E1000 E1250 E1600 E2000 1700 2000 2900 3700 1200 1500 1700 2200
E2500 4000 2500
M1600 4500
M1800 5000
M2000 5500
9000
11000
12000
E2800 4500 3000
• Comparative test values with different cover pairs varying according to the types. • Classification of materials: average hardness and surface irregularity, grain size 0-200 mm with shock absorbing device. The choice of the belt type and cover thickness is a compromise between the working tension and the operating conditions conditions (loading frequency, frequency, product grain size, supply conditions, abrasiveness, etc.) IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
23
E C N A T S I S E R N O I S A R B A
METALTRANS 1 WEFT SEMPERTRANS ® offers you its METALTRANS range E C N A T S I S E R N O I S A R B A
The METALTRANS belt consists of an assembly of two layers of rubber-core impregnated cords. Genuine carcass consisting of: • one layer of cords in the warp direction • one layer of cords in the weft direction (instead of two for the METALCORD belt) Our METALTRANS belt is constructed with cords equally tensed individually, just like the METALCORD belt. Each layer of cords, warp and weft, is separated by a layer of rubber to avoid any risk of fatigue corrosion. Belt complying with standard EN ISO 15236.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
24
METALTRANS WITH D GRADE COVER (superior quality anti-abrasive)
METALTRANS
CARCASS - ELASTIC CORDS M: construction 4x7 elongation under reference load: 0.4 to 0.6 % DESIGNATION Type (N/mm) 500 ø 2.85 mm ø 3.8 mm
E C N A T S I S E R N O I S A R B A
METALTRANS M 1TA (1 steel weft) METALTRANS 630 800 1000 1250 1400 1600 1800 2000
- MEDIUM ELASTIC CORDS E: construction 7x7, 7x19
elongation under reference load: 0.2 to 0.3 %
DESIGNATION METALTRANS METAL TRANS E 1TA (1 steel weft) Type (N/mm) 800 1000 1250 1400 1600 1800 2000 2250 2500 2800 3150 3500 4000 ø 3.1 mm ø 3.7 À 8.6 mm* * Diameter and pitch of cords as per customer request.
POSSIBLE CONSTRUCTIONS OF WEFTS
In accordance with your needs, our Design Office can offer you variants derived from the METALCORD METALCORD range: METALTRANS 1 TA
METALTRANS 1 TN
S 1 TA TA S
1 steel steel weft weft, cover cover meas measure uredd abov abovee the wef weftt 1 ste steel el br brea eake kerr inc inclu lude dedd in in the the ca carrrrie ierr cov cover erss
1: Top cover
2: Carcass
1 TN
T
1 TA
1 TN T
1 polya polyamide mide weft, cover cover measu measured red abov abovee the wef weftt 1 po poly lyam amid idee bre break aker er in incl cluded uded in th thee car carririer er co cove vers rs
3: Bottom cover
COVER PAIRS (type, standard, as per customer request, min.) Type (N (N/mm) 500 630 800 1000 1250 1400 1600 1800 2000 2250 2500 2800 3150 2500 4000
Range As per request
4+3, 6+3 (others, consult us) Min. 4+3
Min. 5 + 4
Min. 6+5
WIDTH Possibility of supply in all widths, from 600 mm to 1200 mm. For widths between 1200 and 2000 mm, please consult our technical departments for the supply possibilities. IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
25
METALTRANS
CARCASS E C N A T S I S E R N O I S A R B A
Type (N/mm)
500 Carcass thickness (mm) 4 Carcass weight 6.6 (Kg/m2)
METALTRANS M 1TA (1 steel weft) 630 800 1000 1250 1400 1600 1800 2000 4 4 4 4 4 4 5.8 5. 5 .8
7.1
7.8
8.7
9.6
9.8
10.1 13.8 14.3 Values given for information
METALTRANS E 1TA (1 steel weft) Type (N/mm) 800 1000 1250 1400 1600 1800 2000 2500 2800 3150 3500 4000 Carcass thickness (mm) 5 5 5 5 5 5 5 6.5 7.5 8.5 9.4 10.4 Carcass weight 9.6 9.7 10.1 10.6 11.3 12 12.8 16.6 19.1 21.2 24 27.1 (Kg/m2) Values given for information
• For manufacturing with nylon wefts (1TN), take approximately 0.5 kg/m 2 away from the METALTRANS 1 TA belt. COVER METALTRANS belts can be produced in most of the cover grades of our range. See details of characteristics on pages 66 and 67. DENSITY OF VARIOUS STANDARD COVERS Cover Weight in Kg/m2 for 1 mm of Gum
D
X
Y
W
1.16 1.11 1.12 1.12
J2/K CR TEA TEB CW
G
GM JG J G M JG F
1.20 1.33 1.12 1.07 1.20 1.15 1.13 1.21 1.27 Values given for information
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
26
METALTRANS
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Station spacing - Roller skirt clearance - Splicing
E C N A T S I S E R N O I S A R B A
CROWN OF PULLEYS. M CORD BELT On a trough type conveyor, M cord belts function correctly without a crown. However, on conveyors with a small centre distance, the crown is an effective element for the centring of a belt. It is in this case tolerated with the limits f<0.01 x pulley diameter. E CORD BELT Crown prohibited in all cases.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
27
ST/SEMPERCORD ST AS PER DIN SEMPERCORD ST are used in the following cases: E C N A T S I S E R N O I S A R B A
• Possibility of use in case of very high breaking strength (ST 7000 N/m) • Low elongation, making possible the production of long conveyors with reduced tension travel • Operating safety and long service life • Good transverse flexibility allowing the use of deep troughs • Capacity for use with low-diameter pulleys • Resistance and service life of splices similar to those of the belt • Belts complying with standards DIN 22131 and ISO 15236
• severe conditions of use • high outputs • large centre distances and steep gradients • high belt breaking strength Areas of use: • Coal mines • Extraction industry • Ore transformation installations installations • Metallurgy • Thermal power plants • Sugar factories • Port installations
Advantages of SEMPERCORD steel cord conveyor belts: IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
28
ST/SEMPERCORD
CONSTRUCTION OF BELTS WITH TRANSVERSE REINFORCEMENTS The carcass is composed of warp cords with low elongation (elongation under reference load 0.2 – 0.3%). Their number and diameter depend on the breaking strength of the belt. The transverse reinforcements consist: - either of specific transverse metal cords with very high elasticity, - or polyamide fabric. These transverse reinforcements can be included in the carcass, in which case they are called the weft. These transverse reinforcements can be included in the thickness of the cover cover,, in which case they are called the breaker. breaker.
Metal belt with steel cords as per DIN 22131 / EN ISO 15236 with metal transverse reinforcements.
Metal belt with steel cords as per DIN 22131 / EN ISO 15236 with polyamide transverse reinforcements.
Depending on the working conditions, the transverse reinforcements may be placed on either side of the warp cords or on one side only. Top cover
Top cover
Carcass
Carcass
Bottom cover
Bottom cover
Standard ST belt
ST belt with 2 metal wefts (ST S/S)
Top cover Carcass
There are numerous solutions for the positioning of the transverse reinforcements. Please consult our technical departments to define the solution most appropriate for your needs.
Bottom cover ST belt with 2 polyamide breakers
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition. Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
29
E C N A T S I S E R N O I S A R B A
ST/SEMPERCORD
BELT CONSTRUCTION E C N A T S I S E R N O I S A R B A
Covers: excellent resistance to abrasion, ageing and light. Bonder rubber: Adhesion to galvanised cords and to covers: excellent rubber penetration, high shear modulus, resistance to revulcanisation and ageing. Transverse reinforcement: depending on the application, with or without transverse textile or metal breaker /weft.
Top cover
Moulded edge Tie gum Steel cords
Stranding
Stranding
S
Z
Bottom cover
The standard cords are hot-galvanised and have diameters of 3.7 to 11.2 mm and 7x7 or 7x19 constructions depending on the diameter (other constructions are possible). Brass-plated cords can be used. The construction of the cords enables good penetration and distribution of the rubber. Owing to an efficient chemical process, we obtain excellent rubber-metal adhesion. This chemical adhesion between cords and rubber and the construction of the cords guarantee excellent holding power which is in all cases greater than that demanded by the standards. The good penetration of the rubber and the good adhesion of each cord ensure that Sempercord belts have an exceptional service life.
Cord construction
The abrasion index, breaking strength and breaking elongation values of the covers depend on the grade of the cover mixtures chosen (X, Y, W, etc.).
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
30
ST/SEMPERCORD
MANUFACTURING STANDARD Standards EN ISO 15236 and DIN 22131 define a number of belts. SEMPERTRANS ® offers you an even greater choice (see table on page 32).
SEMPERTRANS RANGE® • Range available: available: 630 to 5400 N/m with possibility of extension extension to 7000 N/m • Cord diameter: 3.2 mm to 11.2 mm • Belt width: 800 mm to 3200 mm • Total belt thickness: 14 mm to 40 mm • Cover thickness: wide range of pairs with a minimum according to the cord diameter used. • Reel capacity: weight 35 T / lengths 500 to 700 m. COMPOUNDS used for SEMPERCORD Type of cover Weight in kg/m2 for 1mm of gum X / 1S 1.11 Y 1.12 W 1.12 D 1.15 V 1.42 K 1.20 TEA / T1 1.12 R 1.13 Values given for information
The cover types and thicknesses are defined in accordance with the conditions of use of the belt, according to the following parameters. • Condition of use of belt • Materials conveyed • Centre distances of conveyor • Grain size of materials conveyed • Density of materials conveyed • Abrasiveness of materials • Fire resistance required • Temperature of material conveyed • Resistance to chemical aggressions
RECOMMENDED MINIMUM COVER THICKNESS
Area of use
Type of materials
Bottom and surface conveyor Bottom and surfrfaace conveyor Extractors, mobile belt
Graded coal, gravel, sterile materials Raw coal, ores, sterile materials Blocks of coal, stone conveyors, reloading stations and ores
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Top cover Bottom cover 6-8
4-6
8-10
5-6
12-16
6-8
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
31
E C N A T S I S E R N O I S A R B A
ST/SEMPERCORD
Standard range. “DIN” construction ST belt. E C N A T S I S E R N O I S A R B A
Belt type
ST 630 3.2
ST ST ST 800 1000 1000 3.7 3. 3.7 7
Cord di Cord diam amet eter er (mm) Cord Co rd co cons nstrtruc uctition on 7x7 Pitch of cords t (mm) Carc Ca rcas asss we weig ighht (kg/m2) Min. thickness of bottom cover (mm) DIN 22131
ST 1400 4.4 4.8 7x7
ST 1500 5.0 4.0 7x7
12.7 15 10.6 11.3 * * 8+6
15 10 11.6 10.5 * * 8+6
18.4 28.8
19.0 18.0
211 21 1
60 50 75 64 92 77 107 90 123 104 139 117 154 130 170 144 174 147 185 157 190 181 194 164 202 170 209 177 217 184 233 197
225 22 5
210
ST 1250 125 0
3.7 4.4 4. 4
15
7x7
7x7 7x 7
15
12
7x7 10 14
6.1
8.5
8.5 8. 5
*
9.0 10.1
*
4
* 4
Usuall th Usua thic ickn knes esse sess 6+44 7+ 6+ 7+55 8+ 8+6 of covers Belt thicknes c knesss (mm (mm)) 13 13.2 .2 15.7 15.7 17.7 for these thicknesses Rated width mm 800±10 50 50 64
8+6
17.7 18.4
75 55
1000±10
64
64
81
95 69
1200±10
77
77
97
116 84
1400±12
90
90
114 11 4
136 98
1600±12
104
104
131 13 1
1800±14
117
117
147 14 7
155 112 11 2
176 127 12 7
2000±14
130
130
164 16 4
195 141 14 1
2200±15
144
144
181 18 1
216 155 15 5
2250±15
147
147
184 18 4
221 158 15 8
2400±15
157
157
197 19 7
236 169 16 9
2450±15
161
161
201 20 1
240 172 17 2
2500±15
164
164
206 20 6
2600±15
170
170
213 21 3
176 17 6 183 18 3
2700±15
177
177
222 22 2 190 19 0
2800±15
184
184
3000±15
197
197
231 23 1 197 19 7
3200±15
In bold
210
210
ST
ST
ST
ST
ST
2500 25 00
3150 31 50
3500 35 00
4000 40 00
4500 45 00
5.2
ST 2250 5.2
6.8
7.6
8.2
8.8
9.3
7x7 7x 7
7x7
7x19 7x 19
7x19 7x 19
7x19 7x 19
12
11
15
15
15
15
16
17
17
14.8
17.7
21.4
23.7
27.2
29.4
33.1
35.8
4
*
5
5.5
6
6.5
7
7.5
8
8+6 8+ 6
8+6
10+6 10 +6
14+7 14 +7
14+7 14 +7
15+8 15 +8 16+10 16+10 16 16+1 +10 0 16 16+1 +10 0
19.2
22.8
28.6
29.2
31.8
35.3
36.. ..6 6
37.2
50 75 64 95 77 116 90 136 104 155 117 176 130 195 144 216 147 221 157 236 161 240 164
19.2 19.2 18.4 Number of warp cords 56 50 64 75 71 64 81 95 86 77 97 116 100 11 90 114 4 136 115 13 104 10 4 131 1 155 130 14 117 11 7 147 7 176 145 16 130 13 0 164 4 195 160 18 144 14 4 181 1 216 147 14 7 163 18 184 4 221 174 19 157 15 7 197 7 236 161 16 1 178 20 201 1 240 182 20 164 16 4 205 5
69
50
50
50
87
64
64
64
64
59
55
55
170
170 17 0
190
177
177 17 7
184
ST 1600 5.2 5. 2 7x7 7x 7 15 12.6 4 8+6 8+ 6
ST 1800 5.2 4.4 7x7 13.5 10 13.3 11.8 * * 8+6
ST 2000
14.2
19.2
7x19 7x 19 7x19 7x19
ST
ST
5000 50 00 5400 5400 10.6
11.2
7x19 7x 19 7x1 7x19 9
105
77 77
77
77
77
71
66
66
123
90 90
90
90
90
84
78
78
141
10 104
104
104
104
96
90
90
160
117
117
117
117
109
102
102
178
130
130
130
130
121
113
113
185
144
144
144
144
134
125
125
201
147
147
147
147
137
128
128
214
157
157
157
157
146
137
137
219
161
161
161
161
150
141
141
224
164
164
164
164
153
144
144
213 21 3
235
170
170
170
170
159
149
149
187
222 22 2
240
177
177
177
177
166
156
156
184 18 4
204
231
184
184
184
184
171
161
161 16
197
197 19 7
219
197
197 19
197 19
197 19
1 84 18
172 17
172
210
210 21 0
210
210
210
210
195
184
184
the constructions not standardised in standards DIN 22131 / EN ISO 15236. The weights and thicknesses are given for information.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
32
ST/SEMPERCORD
STANDARD RANGE DIN CONSTRUCTION ST BELT WITH METAL WEFTS Belt type Cord diameter (mm) Cord co construction Pitch of cords t (mm) Carc Ca rcas asss th thic ickn knes esss with 1 weft Carcass weight (kg/m2) with 1 weft Carc Ca rcas asss th thic ickn knes esss with 2 weft
ST 630 3.2
ST ST ST 800 1000 1000 3.7 3.7
7x7
7x7
15
15
ST 1400 4.4 4.8 7x7
ST 1500 5.0 4.0 7x7
12.7 15 6.6 7.0
15 10 7.2 6.2
13.7 14.3 8.0 8.4
13.5 14.6 8.6 7.6
15.6
16.0
16.5 17.1
17.4 16.3
4+4
4+4
4+4
ST 1250 125 0
3.7 4.4 4. 4
7x 7x7 12
7x7
10 14
5.4
5.9
5.9
5.9 6.6 6. 6
9.2
11.5
11. 5
6.8
12.1 13.2
7.3
7.3
7.3 8.0
Carcas Carc asss we weig ight ht 12.0 12. 2 ((kg/m ) with 2 weft Min. thickness of covers 4+4
14..3 14.3 14
14.9
ST 1600 5.2 7x7 7x 7 15 7.4
ST 1800 5.2 4.4 7x7 13.5 10 7.4 6.6
ST
ST
ST
ST
ST
2500 25 00
3150 31 50
3500 35 00
4000 40 00
4500 45 00
5.2 5. 2
ST 2250 5.2
6.8
7.6
8.2
8.8
9.3
7x7 7x 7
7x7
7x19 7x 19
7x19 7x 19
7x19 7x 19
12
11
15
15
15
15
16
17
17
7.4 7. 4
7.4
10.0
10.8
11.4
12.0
12.5
14.8
15.4
17.9
21.9
25.6
27.9
31.4
33.1
38.4
41.1
8.8
11.4
12.2
12.8
13.4
13.9
16.2
16.8
28.4
30.7
34.2
35.9
42.2
44.2
ST 2000
16.4 14.9 8.8 8.0
17.2
18.4
19.2 17.7
20.1
20.7
24.7
4+4 4+ 4
4+4
4+4 4+ 4
4+4
5+5
8.8
8.8 8. 8
7x19 7x 19 7x19 7x19
5.5
4+4
4+ 4+4
+
6.5 6+6
5.5
Rated width mm 800±10
50
50
64
1000±10
64
64
81
75 55
95 69
1200±10
77
77
97
116 84
1400±12
90
90
114 11 4
136 98
1600±12
104
104
131 13 1
155 112 11 2
1800±14
117
117
147 14 7
176 127 12 7
2000±14
130
130
164 16 4
195 141 14 1
2200 to 3200
In bold
60 50 75 64 92 77 107 90 123 104 139 117 154 130
50 75 64 95 77 116 90 136 104 155 117 176 130 195
50 64 77 90 104 10 4 117 11 7 130 13 0
Number of warp cords 56 69 64 75 71 87 81 95 86 105 97 116 100 11 123 114 4 136 115 13 141 131 1 155 130 14 160 147 7 176 145 16 178 164 4 195
+
ST
ST
5000 50 00 5400 5400 10.6
11.2
7x19 7x 19 7x1 7x19 9
7.5 7+7
+
8+8
6.5
50 50
50
50
64
64
64
64
59
55
55
77 77
77
77
77
71
66
66
90 90
90
90
90
84
78
78
104 10
104
104
104
96
90
90
117
117
117
117
109
102
102
130
130
130
130
121
113
113
CONSULT OUR TECHNICAL DEPARTMENTS
the constructions not standardised in standards DIN 22131 / EN ISO 15236. The weights and thicknesses are given for information.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
33
E C N A T S I S E R N O I S A R B A
ST/SEMPERCORD
E C N A T S I S E R N O I S A R B A
Weight and thickness of “DIN” construction ST BELTS with TEXTILE REINFORCEMENTS (or BREAKERS) included in the thickness of the covers: take the values of the ST belts on page 33. Reminder of definitions of transverse reinforcements REINFORCEMENT REINFORCEM ENT (or BREAKER): transverse reinforcement of the cover; the width of this reinforcement must not be less than the width of the belt minus 100 mm. A reinforcement may be textile or metal.
WEFT: transverse reinforcement which is an integral part of the carcass; the width of this reinforcement must not be less than WEFT: the width of the belt minus 50 mm. A weft may be textile or metal. Examples of designation of belts (as per standard EN ISO 15236) 1 - ST belt with a width of 2200 mm, minimum breaking strength of 2500 N/mm, top cover thickness 10 mm and bottom cover thickness 6 mm, grade X covers, designation 2200 ST 2500 10+6 X
2 - ST belt with a width of 2000 mm, minimum breaking strength of 3150 N/mm, top cover thickness 12 mm and bottom cover thickness 8 mm, with transverse armatures (textile reinforcements) included in the thicknesses of the covers, grade X covers, designation 2000 ST 3150 12T+8T X 3 - ST belt with a width of 2000 mm, minimum breaking strength of 3150 N/mm, top cover thickness 12 mm and bottom cover thickness 8 mm, with transverse armatures (metal reinforcements) included in the thicknesses of the covers, grade X covers, designation 2000 ST 3150 12S+8S X 4 - ST belt with a width of 1800 mm, minimum breaking strength of 2000 N/mm, top cover thickness 8 mm and bottom cover thickness 5 mm, with transverse armatures (metal reinforcements) which are part of the carcass, grade W covers, designation 1800 ST S/S 2000 8+5 W 5 - ST belt with a width of 1400 mm, minimum breaking strength of 1600 N/mm, top cover thickness 10 mm and bottom cover thickness 5 mm, with a transverse armature (metal reinforcement) included in the thickness of the top cover cover,, grade Y covers, designation 1400 ST 1600 10S+5 Y TECHNICAL SPECIFICATIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
34
E C N A T S I S E R N O I S A R B A
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
35
TRANSFLAM ANTI-ST ANTISTA ATIC SAFET SAFETY Y BEL BELTS TS Depending on the conditions of use (surface or bottom) and the level of safety demanded, the various international (or national) standards define the tests which the belts must undergo to meet the criteria defined by these standards. In addition, certain countries demand specific approvals for underground uses, mainly in coal mines.
The TRANSFLAM range is a range specially designed to meet the safety requirements of various industries. These belts are designed mainly: • to prevent the propagation of an accidental fire • to guard against risks of explosion due to the accumulation of static electricity Characteristics of conveyor to be equipped All the data concerning the conveyor to be equipped… • minimum pulley diameter • trough transition length • tension travel to be allowed for … are indicated in the Technical Recommendations section.
E C N A T S I S E R E M A L F
Heat resistance The temperatures of use of our fireproof belts are the same as those of our anti-abrasive belts, i.e. a range of -25 to 80°C. All COKE WARF belts are available for applications with a temperature of use of up to 120° with peaks of up to 150°C.
Range All our EP (polyester warp, polyamide weft) and PP (polyamide warp, polyamide weft) textile carcass belts or metal belts (METALCORD, ST/SEMPERCORD, METALTRANS) are available in fireproof quality (see page 37).
They are manufactured on demand: • in specific cover thicknesses of 3+1.5 to 15+10 • in widths of 400 to 2800 mm • in the following breaking strengths: - TRANSFLAM textile, EP or PP fabric
2 plies: 250 N/mm to 1250 N/mm 3 plies: 400 N/mm to 1400 N/mm 4 plies: 500 N/mm to 2500 N/mm 5 plies: 630 N/mm to 3500 N/mm
- TRANSFLAM metal
with M cords: cords: 500 N/mm N/mm to 2000 2000 N/mm withh E cords wit cords:: 800 N/m N/mm m to 2250 2250 N/m N/mm m with DIN construction cords: 630 N/mm to 5400 N/mm
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
36
TRANSFLAM
LIST OF FIREPROOFING STANDARDS AVAILABLE DESI DE SIGN GNA ATI TION ON
Valid for all flame-resistant belts K
S
GME TG (V) CR/VT (FRANCE)
D : NT CR :VT CES 8
J5
TM
Stan St anda dard rdss
ISO 284 NF EN 20284 DIN EN 20284 PN EN 20284 ISO 340 NF EN 20340 DIN 22103 DIN EN 20340 ISO 340 NF EN 20340 DIN 22103 DIN EN 20340
Char Ch arac acte teri rist stics ics re requ quir ired edss
Brie Br ieff de desc scri ript ptio ionn of te test st.. Tests and test method Tests
Anti-static Electrical conductiv iviity
Measurement of electrical conductivity between electrodes. The resistance must be less than 3x108 ohms
Flame-resistant with cover
Burner test. Belt tested with cover
Flame-resistant with and without co covver
Test same as above but belt tested with and without co covver
CSA Klasse C standard canadien association
Flame-resistant with cover as per Canadian standard
PN 71/C05011 Pit bottom belt for Poland, Russia, Ukraine, etc. DIN 22118 NFT 47107 DMH 50 Approved belts
Polish standardisation
«Requirements of CSA standard CAN/CSA-M87 Fire performance and antistatic requirements for Conveyor Belting» • burner test • oxygen index • pulley test • electrical resistance test As per existing standardisation
Approved belts
As per existing standardisation
DIN22109 part 4 DIN22109 part 6 CES8 British Steel Standard (GB) National Mining Research Center Skochinsky Institute of Mining, Moskau PN 74/C94143 PN C 05019 PN EN 20284
Self-extinguishable Main application underground coal
Refers to DIN 22118 for the flame test Flame resistance with propane burner in air current
• Test in gallery • Lengths intact after extinguishing of burner on an initial sample of given width • Pulley test Coal mines in Germany • special fabric. Two-ply belts • separable sandwich • NT grade: without safety criterion; anti-abrasive cover • VT grade: with CR grade safety criterion Test in mini-gallery
Flame resistant with cover as per Russian standard
• burner test • pulley test • electrical resistance test
Flame resistant Polish standard
Approved for mines, mineral without methane
Weightsts and thicknesses of these belts: consult our technical departments. Weigh TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
37
E C N A T S I S E R E M A L F
TRANSTHERM HIGH HEAT This range is designed to meet the increasing mechanical and thermal stresses generated by the conveying of materials at temperatures between 100 °C and 220 °C with possible peaks at 300 °C.
Areas of application
• Cement works • Iron and steel industry • Chemical industries - Fertilisers • Foundries • Lime kilns • Mining industries • Salt works • Public works • Glassworks
Optimum performances are obtained with the TEC cover.
This list is not exhaustive. Our technical sales representatives are at your disposal to advise you in your choice and in any other application justifying the use of the TRANSTHERM belt.
E C N A T S I S E R T A E H
SEMPERTRANS ® is able to offer you three possible
structures: • Multiply consisting of 2 to 4 plies of EP (polyester warp and polyamide weft) or PP (polyamide warp and polyamide weft) woven fabric with rubber interfaces. • Multiply consisting of EP (polyester warp and polyamide weft) or PP (polyamide warp and polyamide weft) woven fabric with rubber interfaces protected by an anti-shock metal shield incorporated in the top cover. • Entirely metal carcass comprising a heat shield incorporated in the top cover cover.. (MWH belt of which the heat shield has the property of evacuating the stored calories).
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
38
TRANSTHERM
COVER GRADES TRANSTHERM is available with five cover grades:
• Coke Warf CW, based on SBR, for conveying of materials at medium temperature with fireproofing • TEA/T1, based on SBR, for conveying of materials at medium temperature • TEB, based on BUTYL/EPDM mixture, for conveying of materials at high temperature • T2, cover based on EPM, carcass based on SBR • TEC based on EPM for conveying of very abrasive materials at high temperature COVER CHARACTERISTICS Basic ELASTOMER
Coke-warf / CW Transtherm / TEA / T1 Transtherm / TEB Transtherm / T2 Transtherm / TEC
SBR SBR BUTYL/EPDM EPM, SBR carcass E PM
Permanent TEMPERATURE of material
++ ++ +++ +++ ++++
Abrasion LOSS (mm3) ISO 4649 DIN 53516 NFT 46012
++ +++ + ++ ++
+ Aver Averag agee perf perform orman ance ce ++ Goo Goodd perfo perform rman ance ce ++ ++++ Very Very goo goodd perf perfor orma mance nce
Breaking STRENGTH NFT 46002 ISO 37 (MPa)
+++ +++ ++ ++ ++
Breaking ELONGATION ELONGA TION NFT 46002 ISO 37 (%)
+++ +++ +++ ++ ++
++++ ++ ++ Exc Excel elle lent nt perf perfor orma manc ncee
Remark: grade CW is fireproof as per standards NF EN 20340, ISO 340, DIN EN 20340 and EN 20340 and anti-static as per ISO 284, NF EN 2O284, DIN EN 20284, EN 20284 and PN EN 20284.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
39
E C N A T S I S E R T A E H
TRANSTHERM
STANDARD RANGE The above range corresponds to our standard range. On order, order, manufacturing is possible: • in widths, widths, in grade grade TEA / T1, of up to 2800 mm mm for textile textile belts belts up to 3200 mm for metal belts other grades: consult our technical departments • in specific cover thicknesses • in types up to 3500/5 in textile TEA / T1 and up to 2800 N/mm in metal TEB Remark: Manufacturing minimum for non-standard belts: 200 m 2. TRANSTHERM DESIGNATION Textile multiply METAL Type of carcass TEA TEC MWH Belt type 400/3 500/3 M 500 Cover thickness 5+2 5+3 6+3 Rated 650 width 800 with cut edges mm 1000 with moulded edges
SIZE AND WEIGHT CHARACTERISTICS E C N A T S I S E R T A E H
Total thickness (mm) Total weight (kg/m2)
TEA 400/3 5+2 9.7 11.4
TEC 500/3 5+3 11.2 13.0
METAL MWH 500
13 17.1
Values given for information
TECHNICAL SPECIFICATIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
40
TRANSTHERM
RECOMMENDATIONS It is important to note that there is a major difference between the temperature of the product conveyed and the temperature transmitted to the cover by the materials conveyed. This difference between the surface temperature of the belt and the temperature of the product conveyed may vary according to various parameters: • grain size of material • length of conveyor (cooling on return strand) • ambient temperature • ventilation or possible watering
The following average values may be taken t aken on an approximate basis: Mate Ma teri rial alss co conv nvey eyed ed
Maximum temperature of material (°C)
Fine materials such as Cement, Calciu Calc ium m Ca Calc lcin inat ates es (C (CaO aO), ), Cl Clin inke kerr and Foundr y Sand
*
Materials with large grain size and high ab high abra rasi sive vene ness ss su such ch as Pi Pitc tch, h, Ir Iron on and Steel Industry Coke, Pellets, etc.
150 170 200
* 150 250 300
Average temperature of material (°C)
120 130 160 190
130 140 200 220
Temperature at surface of belt (°C)
100 110 150 180
110 130 160 180
* Incandescent points accepted
E C N A T S I S E R T A E H
Fireproofed Coke Warf
• textile • textile with metal breaker • metal TRANSTHERM TEA / T1
• textile • textile with metal breaker • metal TRANSTHERM TEB / T2
• textile • textile with metal breaker • metal TRANSTHERM TEC
• textile • metal (consult us)
In certain cases of use, temperatures higher than those indicated above may be envisaged. Consult our technical departments. IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
41
TRANSOIL RESISTANCE TO OILY AND GREASY PRODUCTS TRANSOIL, a range specially designed for conveying of oily/greasy products or products impregnated with hydrocarbons, vegetable or animal fats, mineral oils, solvents, diluted acids, etc., in a temperature range between -15°C and +100°C. Multiply structure consisting of several plies of polyester warp / polyamide weft woven fabric with rubber interfaces. The TRANSOIL range is available with five possible covers:
• G grade, high resistance to mineral oils and standard hydrocarbons. • GM grade, resistance to vegetable and animal oils and to oleaginous products. • JGM grade, anti-grease, fire proof as per ISO 340, NF EN 20340, DIN EN 20340 and EN 20340 (with covers) and anti-static as per ISO 284, EN 20284, NF EN 20284 and DIN EN 20284. Resistant to vegetable oils and oleaginous products. This grade is particularly well suited to cereal silos. • JGF grade, high resistance to mineral oils and standard hydrocarbons. hydrocarbon s. This cover is fireproof as per ISO 340, NF EN 20340, DIN EN 20340 and EN 20340 (with covers) and anti-static as per ISO 284, EN 20284, NF EN 20284 and DIN EN 20284. • JGS grade , fireproof anti-grease as per ISO 340, NF EN 20340, DIN EN 20340 and EN 20340 flame resistant with and without covers and anti-static as per ISO 284, EN 20284, NF EN 20284 and DIN EN 20284.
E C N A T S I S E R E S A E R G D N A L I O
Areas of application • Cattle feed • Coated fertilizers • Foundries • Car industry • Port installations • Metal recovery • Iron and steel industry • Cereal silos • Sugar factories • Urban waste treatment • Bituminous road coating transport • Glassworks
Expansion Normal expansion test in OIL ASTM no. 3
COVER CHARACTERISTICS Five types of covers are available to meet the stresses of varying degrees of severity generated by the materials handled. The standardised expansion tests (28 days at ambient temperature as per ISO 1817) give the following results in accordance with the severity of the oils.
40
JGM/JGS GM
30 20
JGF G
10
1
Cover
GM G JGM JG M JGF JGSS JG
Oil
Oil
Oil
ASTM 1
ASTM 2
ASTM 3
–2% –3% –2% 0% –2%
+2% 0% +3% +6% +3%
+ 25 25 % +4% + 30 % +8% + 30 %
2
7
14
21
28 days
Other characteristi characteristics cs
Average abrasion loss 120 mm 3 Average abrasion loss 100 mm3 Fire Fi repr proo ooff as as per per ISO 34 340, 0, NF EN 20 2034 340, 0, DIN EN EN 203 20340 40 an andd EN EN 203 20340 40 Anti-ti-ststat An atic ic as pe perr ISO SO 28 284, 4, EN 20 2028 284, 4, NF EN 20 2028 2844 and and DIN EN EN 202 20284 84 Average values given for information
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
42
TRANSOIL
STANDARD RANGE DESIGNATION
TRANSOIL 250/2 400/3 Calidad JGS G GM Thickness (mm) 3+1.5 4+2 4+2 Rated width (mm) 500 650 800 1000 1200 The above range corresponds to our standard range. On order, manufacturing is possible: • in widths up to 1600 mm • in specific cover thicknesses • in belts with moulded edges • other construction and other widths: consult us Remark: Manufacturing minimum for belts: 200 m2. SIZE AND WEIGHT CHARACTERISTICS DESIGNATION TRANSOIL JGS 250/2 Cover thickness (mm) 3+1.5 Total thickness (mm) 7 .8 Weight (kg/m2) 10.3
TRANSOIL G 400/3 4+2 8.3 10.4
TRANSOIL GM 400/3 4+2 8.3 10.2
JGS 4+2
belt with cut edges belt with moulded edges
TRANSOIL JGS 400/3 4+2 10.5 13.8
Values given for information. TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
E C N A T S I S E R E S A E R G D N A L I O
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
43
TRANSLEV EDG S ELEVATOR BELTS WITH JGS COVER The TRANSLEV structure consists of three or four plies of woven fabrics (polyester warp/polyamide weft) with a fireproof rubber interface.
The JGS cover ensures: • Resistance to vegetable and animal oils • Flame resistance as per standard ISO 340, NF EN 20340, EN 20340 and DIN EN 20340 grade S • Anti-static quality as per standard ISO 284, EN 20284, EN 20284 NF EN 20284 and DIN EN 20284 • Complying with ministerial order no. ATEP 987 0265 A of 29/07/98
The JGS cover has been specially developed to answer the two major problems involved in handling of cereals: • expansion in contact with fatty substances (maize, peanut, sunflower, etc.) • risk of explosion/p explosion/propagation ropagation of fire With regard to this, our TRANSLEV EDGS range answers these two problems since it complies with the fire-proofing standards designated above and presents good resistance to expansion in contact with oils and greases of vegetable and animal origin. These EDG elevator belts with JGS cover can also be used in areas presenting risks of explosion.
E C N A T S I S E R E S A E R G D N A L I O
This EDGS range with JGS cover is manufactured in grade S (as defined in ISO 340, NF EN 20340, DIN EN 20340 and EN 20340) as regards fireproofing, i.e. with inflammable cover and carcass . Thus, even when the cover is torn off, the t he belt remains fireproof and still meets the criteria of the standard.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
44
TRANSLEV EDG S
STANDARD RANGE DESIGNATION
EDGS
JGS grade
Working tension (N/mm) Number of plies Weight (kg/m2) Thickness (mm) Standard layers
3.40 3.50 4.63 4.80 4.100 4.125 - resistance to vegetable and animal oils - flame resistance as per standard ISO 340, NF EN 20340, EN 20340 and DIN EN 20340 grade S - anti-static as per standard ISO 284, EN 20284, NF EN 20284 and DIN EN 20284 - complying with ministerial order no. ATEP ATEP 9870265A of 29.7.98 - abrasion loss as per ISO 4649, DIN 53516 and NFT 46012: 145 mm3 - Shore hardness as per DIN 53505: 58 ± 5 - expansion with oil ASTM no. 2 as per ISO 1817 (28 days at ambient temperature) approximately 3 %.
Cover thickness 1.5+2.5 (mm) 40 3 11.7 8 .9 1600
1.5+2.5
1.5+2.5
1.5+2.5
1.5+3
1.5+3
50 3 11.9 9.1 1600
63 4 15.3 12.4 1600
80 4 15.9 12.6 1600
100 4 18.7 14.7 1600
125 4 19.3 15.2 1600
Values given for information. The above range corresponds to our standard range. On order, possibility of manufacturing on request up to a width of 1690 mm and up to type 1600/5. All EDGS belts have cut edges slit on request to the desired width in 10 mm steps in widths between 140 mm and 1690 mm. TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel
E C N A T S I S E R E S A E R G D N A L I O
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
45
TRANSPROFIL STEEP GRADIENT CHEVRONS TRANSPROFIL belts have 15 mm or 25 mm high chevrons
AREAS OF APPLICATION • Mines • Cement works • Cattle feed • Cereal silos • Port installations • Chemical fertilizers • Sugar factories • Quarries and sand pits
moulded and directly integrated in the cover of the conveyor belt. These profiles are produced in a very high quality (grade D) anti-abrasive cover.
ADDITIONAL INFORMATION TRANSPROFIL belts have 15 mm or 25 mm high chevrons moulded and directly integrated in the cover of the conveyor belt. These profiles are produced in a very high quality antiabrasive cover c over..
Depending on the width of the belt and the type of material conveyed, we will advise you on the most appropriate chevron height (15 mm high chevrons or 25 mm high chevrons).
S N O I T A C I L P P A D E S I L A I C E P S
The TRANSPROFIL is a chevron belt specially designed to meet the specific requirements of an increase in the angle of inclination of the conveyor. It will be used in cases in which a conventional conveyor belt is incapable of retaining the materials conveyed.
In very many cases, the angle of inclination of the belt must not exceed 20°. TRANSPROFIL belts provide an answer to this drawback. If the angle of inclination has to exceed 20°, TRANSPROFIL belts will allow you to convey your materials at a greater incline (max. 30° or 40° depending on the case) while at the same time allowing you to save space in your installations.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
46
TRANSPROFIL
TRANSPROFIL WITH CHEVRONS OF HEIGHT 15 mm Chevron spacing: 333 mm Cover thickness: 3+1.5 Superior anti-abrasive D grade BELT CHEV CH EVRO RON N Tra rans nspr prof ofilil WEIGHT Tra rans nspr prof ofilil WEIGHT WIDTH WIDTH 250/2 CD 15 Kg/m 400/3 CD 15 Kg/m 500 400 stock 4.55 600 500 non stock 5.38 650 500 stock 5.75 stock 7 .2 800 600 stock 6.90 stock 8 .7 1000 600 non stock 10.6 Weightsts given for information. Weigh TRANSPROFIL WITH CHEVRONS OF HEIGHT 25 mm Chevron spacing: 210 mm Cover thickness: 3+1.5 Superior anti-abrasive D grade BELT CHEV CH EVRO RON N Tra rans nspr prof ofilil WEIGHT Tra rans nspr prof ofilil WEIGHT WIDTH WIDTH 250/2 CD 25 Kg/m 400/3 CD 25 Kg/m 500 360 non stock 5.43 600 460 non stock 6.38 650 460 non stock 6.75 stock 8.2 800 660 non stock 8.54 stock 10.3 1000 660 stock 12.2 Weightsts given for information. Weigh TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
47
S N O I T A C I L P P A D E S I L A I C E P S
TRANSLEV ELEVATOR BELT The LPM and LPMWH ranges represent a unique technical solution in the top range elevator belt field. Consisting of a layer of longitudinal cords inserted between two layers of transverse cords, these belts provide working safety in large elevators which is unrivalled in the market.
The technological lead of our metal carcass belt compared to the belts available on the market lies in the fact that it consists of special cords enabling: • better bucket attachment owing to a layer of high-density reduced-diameter longitudinal cords inserted between two layers of transverse cords. • a value for cord adhesion in the coating which is far superior in cumulative value to the values which can be obtained using cords of higher unit diameter diameter.. This is essential for hot product belts in which the cord adhesion drops considerably with the raising of the temperature. • minimal diameters for winding of the belt on the pulleys owing to the small diameters of the longitudinal cords. • excellent rubber penetration and high cable adhesion values owing to the open type cord design. This performance is further enhanced by expertise in chemical adhesion between cords and rubber and by vulcanisation at 40 bar.
Because of their metal carcass, the TRANSLEV LPM and LPMWH ranges allow: • high working tensions • low tension travels • high bucket attachment values values (triple layer of of two-way cords) • high heat resistance (LPMWH)
TRANSLEV LPM/LPMWH
The LPM range (SBR cover grade) is suitable for material temperatures of up to 60°C. The LPMWH range is designed for handled material temperatures of up to 130°C.
S N O I T A C I L P P A D E S I L A I C E P S
The LPWH range is a two-ply belt with a textile carcass (polyester warp, polyamide weft) inserted between two transverse reinforcements and cover. This belt (butyl cover grade) is designed for handled material temperatures of up to 130°C. It also presents remarkable bucket attachment values owing to its multi-layer structure and these transverse reinforcements.
TRANSLEV LPWH
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
48
TRANSLEV
RANGE On request, manufacturing is possible: • in 500/2 and 630/2 types in textile and from 1000 to 3500 N/mm in metal • in all symmetrical cover pair thicknesses: - minimum for metal belts: 3+3 - textile: consult us • in width up to 1600 mm for LPWH and 1800 for LPM and LPMWH On request, the cover types in our general range GM, TEA, CW and K can be supplied SIZE AND WEIGHT CHARACTERISTICS
Carcass Designation
Cover thickness Total thickness (mm)
Textile
Metal LPM LPM LPM LPM 1000 1250 1600 2000 LPMWH LPMWH LPMWH LPMWH 1000 1250 1600 2000
LPWH 4.63
LPWH 4.80
2+2
2+2
3+3
3+3
3+3
3+3
9.3
9 .6
13.6
13.6
13.6
13.6
Weight 11.8 12.2 20.9 21.1 22.4 23.8 (kg/m2) These weights and thicknesses are approximate values given for information. TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
49
S N O I T A C I L P P A D E S I L A I C E P S
AUTOSTABLE INSTANTANEOUS SELF-CENTRING
S N O I T A C I L P P A D E S I L A I C E P S
The patented construction principle of the AUTOSTABLE belt ensures instantaneous self-centring. This self-centring effect without the use of accessories or modifications of the installation offers numerous advantages: • Stability of the b elt along its whole length, thus no risk of offcentring and therefore no deterioration of the moulded edges. • Elimination of systematic pinching, hence less wear and lower friction (reduction of power consumed). • Increase in output owing to stabilisation of the vein and the slope of the product and the possibility of increasing the trough angle.
Areas of application
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
• Reversible installation installationss • Installations with poorly centred load (e.g. bucket wheel) • Port installatio installations ns (ores, coal, phosphates) • Mines / Iron and Steel Industry (ores, cokes, added materials) • Thermal power plants (coal, ash) • Cement works (quarry materials, added materials, cold clinker) • Quarries / Sand pits (grain size < 400 mm) • Paper mills (wood, edgings) • Fertiliser factories / Chemical plants (non chemically aggressive materials) • Salt marshes / salt works • Sugar factories (sugar beet, cane, sugar beet chips) • Glassworks (raw materials, cullet, recycling)
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
50
AUTOSTABLE
INSTANTANEOUS SELF-CENTRING One of the main problems encountered in the use of conveyor belts is off-centring. This phenomenon resulting from various causes leads to clogging of installations, reductions in output, deterioration of the moulded edges and a noticeable shortening of the service life of the belt itself.
The patented construction principle of the AUTOSTABLE METAL belt is based on the qualities of METALCORD belts. In particular, this belt offers the qualities and performance associated with the use of cords of various elasticities. Its originality lies in the incorporation of a double metal stiffening layer. One narrower layer is centred on the centre line of the belt, creating a “beam effect” in the central part. The difference in flexibility between this central area and the side areas, which are more flexible in comparison, favours the self-centring of the belt. As the rigid central part cannot adapt to the angle formed by the idler rollers, the belt tends to return to its it s natural trough, thus favouring its stability along its whole length.
1 – Top cover 2 – Bottom cover 3 – Idler roller (length of generatrix to be specified at time or order) 4 – Variable weft (of a width roughly equal to the generatrix of the centre roller) 5 – Normal weft 6 – Warp 7 - Side idler rollers
• Self-centring
The AUTOSTABLE AUTOSTABLE belt centres itself of its own accord on the conveyor. • Increased service life
Reduction of the risks of off-centring and therefore of deterioration of the moulded edges. Elimination of pinching and therefore less wear and lower friction.
NEVER AGAIN!
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
51
S N O I T A C I L P P A D E S I L A I C E P S
AUTOSTABLE
INCREASED OUTPUT As the construction with different faces allows more marked lifting of the edges, the conveying capacity is increased and the output improved. Metric tons/hour
Capacity at 3 m/s with width of 1000 mm
Trough angle in degrees 45° 55° 65° 90°
Trough angle possibilities
AUTOSTABLE M1000 38° / 950 mm with 65° trough angle - SFBT FRANCE
RADIUS CENTRED AT TOP Owing to its greater weight at the centre, which does not affect the troughability, troughability, and the partial retention of its shape, the AUTOSTABLE belt enables the position of the belt in the curve to be corrected or improved.
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
52
AUTOSTABLE
SPECIFIC USES • Conveyors with curves in the horizontal plane
This configuration enables the belt to be kept stable in the curve by opposing the natural movement of the belt in a curve on its support. The acceptable force limits must be calculated on a case-by-case basis in accordance with the outputs and tensions required. Our design office is at your disposal. •Advantages
- safety - compactness - control - capacity
Belt position almost identical when loaded and when empty
SPECIAL APPLICATIONS • Advantages
- automatic load centring (elimination of off-centring) - elimination of dust and pollution - elimination of flaps and grooves in the belts at the flap positions Self-sealed loading without maintenance
Note: The rigid part at the centre can be sized on request to obtain specific configurations. IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
53
S N O I T A C I L P P A D E S I L A I C E P S
AUTOSTABLE
BASIC CONSTRUCTION Multi-weft structure consisting of rubber core impregnated metal cords: • in the warp direction: 1 layer of elastic cords • in the weft direction: 2 layers of high-rigidity cords located above or on either side of the warp layer 1 full width layer 1 layer of a width adapted to the length of the centre roller of the trough TEXTILE VARIANT Mixed textile /metal structure consisting of • in the warp direction: 1 EP type two-ply or multiply carcass • in the weft direction: 2 layers of high-rigidity cords located on either side of the textile carcass RANGE On request, manufacturing is possible: • in all metal types from M 500 to E 4000 • in all textile types from 400/2 to 1000/2 and 500/3 to 1600/4 • in all widths from 800 to 1800 mm (consult us for larger widths) • in most of the cover grades specified on pages 66/67 (anti-abrasive, fireproof, fireproof, heat, oil, etc.) • in all cover thicknesses • manufacturing minimum: 200 m2 TECHNICAL SPECIFICATIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Station spacing - Roller skirt clearance - Splicing
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
54
AUTOSTABLE
COMPARISON OF CENTRING FORCES Application to a belt of width 1000 mm with 50 mm offset AUTOSTABLE NORMAL BELT 30° trough 6.07 daN 1.27 daN 45° trough 10.51 daN 1.76 daN It can be noted that the centring force given by an AUTOSTABLE AUTOSTABLE belt is 4.7 to 7.2 times greater than that given by a normal belt. A) Centring force of belt with rigid edges
Centring force: algebraic sum of the reactions projected on the horizontal line
Calculation of reactions RG and Rd of the edge rollers on the belt assuming the hinges are perfectly flexible
• a force of any type (lateral loading, for example) off-centres the belt
Centring force
• the autostable belt is off-centred under the stress but cannot stabilise itself in offset B) Normal belt centring force
• the centring force is exerted all along the conveyor to enable the belt to return to its original trough IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
55
S N O I T A C I L P P A D E S I L A I C E P S
BIATHLON/TRIATHLON PERFORMANCE, ENDURANCE, RESIST RESISTANCE ANCE The BIATHLON belt consists of two plies of woven fabrics (polyester warp and polyamide weft) and a layer of highelasticity rubber distributing the force between plies.
The BIATHLON / TRIATHLON range is available in all types from 400/2 to 1250/2 and in all the cover grades indicated in our general documentation (see page 66).
The TRIATHLON belt consists of two plies of woven fabrics (polyester warp and polyamide weft) and a metal shield distributing the force between plies. This shield can also be positioned above the 2 plies to protect the carcass.
Areas of application • Conveying of materials materials of large large grain size on large centre distances with high outputs. • For any application application necessitating necessitating shock and tear resistance.
BIATHLON Two-ply belt
S N O I T A C I L P P A D E S I L A I C E P S
Main qualities of BIA BIATHLON THLON / TRIA TRIATHLON THLON belts • Exceptional impact absorption capacity • Reduced pulley diameters owing to the two-ply structure • Exceptional fastener strength for the Triathlon belt (up to 80 % of the belt breaking strength)
TRIATHLON
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
Two-ply belt + force-distributing metal shield
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
56
BIATHLON/TRIATHLON
STANDARD RANGE On request, manufacturing is possible: • in all types from 400/2 to 1250/2 N/mm • in all widths up to 1600 mm • in all the cover grades specified on page 66 • in all cover thicknesses: from 3+2 to 12+6 (or more) Remark: manufacturing minimum: 200 m 2. SIZE AND WEIGHT CHARACTERISTICS DESIGNATION BIATHLON 400/2 Grade Cover Thickness (mm) 6+2 Total thickness (mm) 11.2 Weight (kg/m2) 13.2
BIATHLON 500/2
BIATHLON 630/2
BIATHLON 800/2
BIATHLON BIATHLON 1000/2 1250/2
D
6+2 6+2 6+2 8+3 8+3 11.8 12.3 12.8 17.5 18.5 13.9 14.5 15.2 20.6 21.8 The values are given for information only. The weights indicated concern cover grade D. All cover grades and thicknesses are available. TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Trough transition lengths - Radius of curvature - Turnover - Idler spacing - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
57
S N O I T A C I L P P A D E S I L A I C E P S
PIPETRANS/PIPECORD SOLUTIONS FOR TUBULAR CONVEYORS Based on an original idea combining know-how and technical innovation, this handling system makes it possible not only to preserve the environment but also to protect the product conveyed.
The PIPETRANS / PIPECORD range is renowned for providing an ideal solution for this type of handling. The PIPETRANS range consists of a specially-designed twoply or multiply structure of woven fabrics (polyester warp/polyamide weft) with cutting of plies in the longitudinal direction to enable overlaping of the edges of the tube. The PIPECORD range has a carcass consisting of: • in warp: special high-elasticity cords alternately stranded right and left to counterbalance the twist of the tube • in wefts: special high-elasticity cords of a width designed to provide the appropriate transverse rigidity and enable the overlaping of the edges. It should be noted that the design of the weft is important as it must ensure the maintaining of the tubular shape of the belt in all cases of stress applied to it, particularly on curves, and must prevent the crushing of the belt.
The tubular conveyor can be used to convey all types of products in bulk, from the finest to the coarsest, with a tube diameter two and a half times greater than the maximum grain size. The types of materials which can be conveyed by the tubular conveyor are extremely varied and currently include various sorts of materials of a powdery nature (cements, ash, fly ash, etc.) or otherwise (coal, coke, ore, limestone, gypsum, sludge, fertiliser, sugar, wood chips, etc.).
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
58
PIPETRANS/PIPECORD
STANDARD RANGE In the absence of standards, the widths of the belts are sized to allow an overlap of approximately 15 to 20 % of the width of the belt, i.e.:
Diameter of tube (mm) 150 200 250 300 350 400 450 500
Width of belt (mm) 600 800 1000 1100 1300 1600 1700 1800
Designation PIPETRANS Textile PIPETRANS Textile or PIPECORD Metal PIPECORD Metal
Our technical department is at your disposal to adapt these specifications to your needs or existing installations. POSSIBLE COVER GRADES Most of the grades indicated in our catalogue on page 66 are available in the PIPETRANS/PIPECORD range. VALUE OF MINIMUM VERTICAL AND HORIZONTAL RADIUS Pipetrans range: approximately 300 times the diameter of the tube. Pipecord range: approximately 400 times the diameter of the tube. TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
59
S N O I T A C I L P P A D E S I L A I C E P S
SQUAREBELT SQUARE SECTION TUBULAR CONVEYOR The know-how and technical innovation of SEMPERTRANS ® has resulted in the development of a new handling system: the SQUAREBELT. Combining the technical characteristics of the AUTOSTABLE belt for its construction and of the PIPE CONVEYOR for its use, the SQUAREBELT provides an optimum solution to problems of handling bulk products without pollution of the outside environment while at the same time protecting the product conveyed, and offers a unique advantage compared to a conventional pipe conveyor by preventing twisting of the belt, particularly in curved conveyors.
ADVANTAGES OF THE SQUAREBELT • Environmental protection: the material is totally isolated from the outside environment • Perfect belt alignment: avoids any risk of twisting of the belt • Vertical and horizontal curves: the use of elastic cords allows radii of curvature in vertical and horizontal planes • Roller spacing: because of its inertia, the square cross section allows considerable spacing of the stations
The materials can be conveyed on both strands of the belt. At the loading and tipping points, the SQUARE CONVEYOR is opened and closed in the form of a standard trough to pass flat over the pulleys like a conventional conveyor belt.
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
60
SQUAREBELT
CONSTRUCTION of SQUARE BELT Example of square construction
The SQUARE BELT uses 3 stiffeners with 2 flexible edges to form a square section which contains the material to be conveyed. This revolutionary construction is protected by a patent. The carrier strand and the return strand are supported and guided identically by four rollers, 2 vertical ver tical and 2 horizontal. AVAILABILITY OF THE SYSTEM Although the SQUARE CONVEYOR and the SQUARE BELT are already available on the market, this system is still undergoing development and a test programme to validate the limits of use. Please consult our technical t echnical departments.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
61
S N O I T A C I L P P A D E S I L A I C E P S
TRANSUNIT ROUGHTOP - CTS - TTS TRANSUNIT belts carry out flat, horizontal or inclined
conveying of isolated loads on rollers or on a wooden or metal slider bed.
MULTIPLY STRUCTURE CONSISTING OF: • 2 or 3 plies of woven fabric (polyester warp / polyamide weft) for ROUGHTOP belts.
A surface quality for all working conditions: • Cover with rough patterns on the carrier side and nonrubberised reverse side for the ROUGHTOP belt, enabling it to carry out mainly flat conveying of isolated loads on steep gradients. • Siliconised cotton fabric on one side, wear-resistant rubber cover on the other side: TRANSUNIT CTS*. • Siliconised cotton fabric on one side, unbleached cotton fabric on the other side: TRANSUNIT TTS*.
PRODUCTS HANDLED • Crates (plastic and wood) • Parcels, cardboard boxes and other boxes • Containers and luggage • Packaged goods • Bags (paper, polyethylene, jute, etc.) • Planks and panels • Flat metal parts RUBBER INDUSTRY • Tyres and fired moulded parts • Raw and hot gums (up to 120°C) • Very sticky coated fabric and raw gum • Finished products
* Particularly designed for the rubber industry
Non-contractual relief pattern
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
62
ROUGHSTOP
STANDARD RANGE DESIGNATION
Thickness Cover mm Width mm
1st side 2nd side 200 250 300 350 400 450 500 600 650 750 800 1000 1200 1300
TRANSUNIT ROUGHTOP CTS TTS 250/2 400/3 3.4 mm* 3.4 mm* 1 mm Cotton fabric Without cover* Siliconised cotton fabric • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
With relief * values given for information Possibility of manufacturing of ROUGHTOP belts without sliding face (1 mm reverse side cover): consult us
EDGES All TRANSUNIT belts have cut edges SIZE AND WEIGHT CHARACTERISTICS (approximate values) DESIGNATION TRANSUNIT ROUGHTOP CTS TTS 250/2 400/3 Total thickness mm 5 .6 5.9 4 4.4 2 Total weight Kg/m 5 .2 5.8 4 .7 4.6 Values given for information
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Roller skirt clearance - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
63
S N O I T A C I L P P A D E S I L A I C E P S
TRANSGLIS BELT WITH SLIDING FACE THE TRANSGLIS belt has been specially designed to meet the requirements encountered in the recycling and waste industry. It carries out generally flat, horizontal or inclined conveying of bulk materials of low grain size, on rollers or wooden, metal or PVC sliding beds. Depending on the type of use and the material conveyed, SEMPERTRANS ® has chosen two cover grades: a superior quality anti-abrasive cover (D) and a cover resistant to grease and vegetable oils (GM). Multiply structure consisting of 3 plies of woven fabrics (polyester warp / polyamide weft) including one sliding one.
TRANSGLIS D and GM RANGE Width mm 650 800 Type Cover grade Cover thickness Weight kg/m* 4 .4 5.5 Thickness mm*
Areas of application • Conveying of bulk materials • Conveying of isolated loads • Waste disposal centres • Recycling industry • Selective sorting • Composting
1000 1200 400/3 D or GM 3+0 6.9 8.3 5.8
1400
1600
9 .6
11.0
* Approximate values given for information
EDGES All TRANSGLIS belts have cut edges. TECHNICAL SPECIFICATIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Station spacing - Splicing
S N O I T A C I L P P A D E S I L A I C E P S
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
64
TRANSRIGID STUDIED RIGIDITY The TRANSRIGID range is composed of belts with high transverse rigidity for flat use. They mainly serve as a support for corrugated flanged edges and ribs, to produce conveyors with steep gradients and specific geometries. XST2 belts are fitted in installations presenting harsh working conditions with numerous changes of gradient. XMM belts enable the quality of the metal warp to be combined with particularly rigid wefts. These belts are intended for installations in which the working conditions are harshest and are suitable for “silo covering” applications.
AREAS OF APPLICATION - Port installations - Quarries - Silos - Mines - etc.
TRANSRIGID belts can be equipped with all standard types of edges and ribs on the market. SEMPERTRANS® can
supply you with equipped belts on request.
• XST2: two or three woven plies (polyester warp / polyamide weft) between two layers of rubber core impregnated metal cords of specially designed rigidities. • XMM: assembly consisting of three layers of rubber core impregnated metal cords. - Warp direction: one layer of cords of appropriate elasticity - Warp direction: two layers of cords of specially designed rigidity located on either side of the warp.
STANDARD RANGE
EDGES The XST2 and XMM belts have moulded edges.
Designation
XST2 XST2 Gra radde 315/2 50 315 5000/3 Cover Cover grade D D Cover thickn kneess (mm) 4 + 3 4 + 3 Widths 500 • 600 • 650 • • 800 • • 1000 • • 1200 • 1400 • 1600 • Total thickness 12.8 13.4 Total weight kg/m2 18.3 19.1 Approximate values given for information
XMM 800 D 4 +3 • • • • • • 15.6 20.2
TECHNICAL SPECIFICA SPECIFICATIONS TIONS (see page 66) - Cover grade / resistance of covers to products conveyed - Pulley diameter - Tension travel - Radius of curvature - Idler spacing - Splicing
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
65
S N O I T A C I L P P A D E S I L A I C E P S
TECHNICAL SPECIFICATIONS Cover grade > Resistance of covers to products conveyed > Diameter of pulleys > Tension travel > Trough transition lengths > Radius of curvature > Turnover > Idler clearance > Roller skirt spacing > Splicing >
N O I T A M R O F N I L A C I N H C E T
pages pages pages pages pages pages page page page pages
66 68 76 80 82 84
to 67 to 75 to 79 to 81 to 83 to 85 86 87 88 88 to 90
Our company, which provides a global service, will assist you in the study of your installations, whether new or undergoing modification. If necessary, our technical departments can advise you on the most appropriate choices concerning: • The widths, in accordance with the outputs conveyed, the grain size and the type of material. • The position and the appropriate number of drive and tension pulleys. • The value of the radii of curvature. • The trough transition lengths • Conveyors with curves in the horizontal plane. • Belt turnover • Determining of the forces in the belt leading to the choice of the appropriate type of belt.
COVER GRADE SEMPERTRANS® belts can be supplied in a wide range of cover grades enabling most existing standards to be met. The table below summarises the main grades available. Other grades may be produced on request. The characteristics of the product conveyed (grain size, temperature, chemical characteristics, etc.) and the operating conditions determine the choice of the grade and thicknesses of the covers.
E V I S A R B A I T N A
Desi De sign gnat atio ionn
Elas El asto tome merr
Othe Ot herr ba basi sicc
D
SBR
L RMA I RMA II N 17 JIS G Y JIS S
Stan St anda dard rdss re rela lati ting ng to designations ISO 10247 US standard US standard BS 490 JIS K6322 – K6369 DIN 22102 - 22131 JIS K6322 – K6369
H X M24 Grade S
ISO IS O 10 1024 247 7 DIN 22102 / 22131 BS 490 PL74/C-94143
Y X
SBR / BR / IR NR/S NR /SBR BR
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Char Ch arac acte teri rist stic icss
Main Ma in ap appl plic icat atio ions ns
Abrasion guaranteed less than or equal to 120 mm3(1)
Standard applications
Abrasion guaranteed less than or equal to 150 mm3 (1) Abra Ab rasi sion on gu guar aran ante teed ed less than or equal to 120 mm3 (1)
Standard applications Abrasi Abra sive ve ma mate teri rial alss Large grain size Sharp edges
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
66
COVER GRADE Desi De sign gnat atio ionn E V I S A R B A I T N A
T N A T S I S E R E R I F
T N A T S I S E R T A E H
S E S A E R G D N A S L I O O T T N A T S I S E R
D I S T L S N O E A C R T (1)
Elas El asto tome merr
Othe Ot herr ba basi sicc
Stan St anda dard rdss re rela lati ting ng to designations
W
IR / BR
D W
Z
SBR
Z Grade 2
K
Firirep epro roof of SBR
K
ISO IS O 34 3400 EN 20340
S
Fireproof SBR
S
CR
Chloririna Chlo nate tedd butadiene
DIN 22 2210 1099
TEA/T1
Reinforced SBR
ISO 340 EN 20340 DIN EN 20340 NF EN 20340 BS EN 20340 MSHA DIN 22 2210 1099 DMH 50 Approved belts
TEB
EPDM / Butyl
TEC
EPM
T2
EPM
CW
Fireproof reinforced SBR
G
NBR
GM
BR/SBR
JGM
Fireproof NBR/SB NBR/ SBRR
JGF
Fireproof NBR
JGS
Fireproof NBR/SBR
R
ISO 10247 DIN 22102 i
DIN 22102 PL74/C-94143
ISO 340 EN 20340 DIN EN 20340 NF EN 20340 BS EN 20340
ISO 340 EN 20 2034 3400 DIN EN 20340 NF EN 20340 BS EN 20340 ISO 340 EN 20340 DIN EN 20340 NF EN 20340 BS EN 20340
Char Ch arac acte teri rist stic icss
Abrasion guaranteed less th thaan or equal to 90 mm3 (1) Abrasion guaranteed less than or equal to 250 mm3 (1) Flame a me re resi sist stan ance ce as per ISO 340 with cover
Main Ma in ap appl plic icat atio ions ns
Ver eryy abrasive fine mater eria ialls
Applicat Appl i catio ionn in wh whic ichh th thee fifire re risk or danger of explosion must be eliminated
Flame resistance as per ISO 340 with and without cover
Underground mines Excluding coal
Meet Me ets nu num mer erou ouss safety standards
Unde Un derg rgro roun undd co coaal min ines es,, pproved belts Materials of temperature under 150°C Materials of max. temp. 180°/200°C Materials of max. temp. 200°/220°C Materials of max. temp. 180°/200°C Coke Warf, max. temperature 120°C
28-day expansion tests at ambient temperature, ASTM no. 3<5% 28-day expansion tests at ambient temperature, ASTM no. 2<5% ASTM no. 3 < 30%
Resistant to oils and greases of mineral origin
Flame a me re resi siststan ance ce as pe perr ISO 340 with cover
Applicati Appl i cation on in wh which ich th thee fir firee risk or danger of explosion must be eliminated + Resistant to vegetable oils and greases Application in which the fire risk or danger of explosion must be eliminated + Resistant to oils and greases of mineral origin
Flame resistance as per ISO 340 with cover Fireproof as per: ISO 340 DIN EN 20340 NF EN 20340 EN 20340 GOST 2085
Flame resistance as per ISO 340 with and without cover
Resistant to vegetable oils and greases
Special for elevator belts Ministerial order ATEP 987 026A of 29/07/98 For use at temperatures below 0°C down to -60°C
Tests as per ISO 4649 – DIN 53516
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
67
N O I T A M R O F N I L A C I N H C E T
RESISTANCE OF COVERS TO PRODUCTS RESISTANCE CONVEYED Summary table LEVEL OF RESISTANCE KEY The classification given below is based on the classification system in standard ISO / TR7620 2005
++ Good resistance. Corresponds to class 1 of standard ISO / TR7620 2005 + Accep Acceptable table resist resistance. ance. Correspo Corresponds nds to class class 2 of standard standard ISO ISO / TR7620 TR7620 2005 ? Depe Depends nds on condition conditionss of use. Correspond Correspondss to class 3 of standa standard rd ISO / TR7620 TR7620 2005 2005 / Unfit for for use. Corresp Corresponds onds to class class 4 of of standard standard ISO ISO / TR7620 TR7620 2005 2005
The max. temperatures indicated are those of the product. In no case are they the temperature of the conveyor’ss environment. conveyor’ When the limit temperature is not indicated for the recommendation, take the max. product temperatures indicated below. For liquids the recommendations are indicated for an ambient temperature (unless specified otherwise). Grade
N O I T A M R O F N I L A C I N H C E T
D–X–Y–W–R–K–S TEA – T1 TEB TEC G - JGF GM – JGM - JGS CR - V
Continuous state
8 0 ° C. 1 2 0 ° C. 150° C. 180° C. 8 0 ° C. 8 0 ° C. 7 0 ° C.
Intermittent state
1 0 0 ° C. 1 5 0 ° C. 2 0 0 ° C. 2 2 0 ° C. 1 0 0 ° C. 1 0 0 ° C. 1 0 0 ° C.
The purpose of this list is to provide quick information. The large number of substances and the variety of the installations concerned do not allow the conducting of the tests for all possible conditions of use. This list is a guide for the choice of the cover grade. It is not a guarantee for use. Our technicians are ready to advise you and if necessary conduct specific tests to determine the cover grade best suited to your particular need.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
68
MATERIALS
Concentration
Material temperature °C
Acetic acid
Pure Weak
ambient ambient ambient
Acetone (contact) Alumina sulphate Aluminium chloride fluoride sulphate Ammonium Carbonate Nitrate Nitrate Nitrate chloride sulphate Anthracite (screened grains) ASTM 1
< 60 < 100 > 1 00
20 50
ASTM 2 Ball agglomerates Barite (barium sulphate) Barium chloride Barium sulphate Bar yte Basalt Bauxite (unsorted crushed material) Beet (sugary liquor) Bentonites (clay rich in magnesium) Benzene Bi (tri) ammonium phosphate Bicarbonate of soda Bitumen
20 50
< 80 > 80
Blast furnace agglomerates Bone Boric acid Briquettes IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
? ? ++ ++
? ? ++ ++
? ? ++ ++
? + ++ ++
++ ++ ++
++ ++ ++
++ ++ ++
++ ++ ? / ++ ++ ++ / /
++ ++ + ? ++ ++ ++ / /
/ / + ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++ ++ / + ? ++ ++
/ / + ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++ ++ / + ? ++ ++
GM JGM JGS
CR V
? ? / ++
++
++
++ ++ ++
++ ++ ++
++ ++ ++
++ ++ ++
++ ++ + + ++ ++ ++ ?/ ?/
++ ++ + + ++ ++ ++ / /
++ ++ + ? ++ ++ ++ ++ ++
++ ++
++ ++
++ ++ ++
++ ++ ++ + +
/ / + ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++ ++ / + ? ++ ++
/ / ++ ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++ ++ ? ++ ? ++ ++
++ + ++ ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++ ++ ? ++ ++ ++ ++
?/ ?/ ++ ++ ++ ++ ++ ++ ++ ++ / ++ ++
++ ++ ++ ++ ++ ++ ++ / ++ ++
+ ++ ++
+ ++ ++
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
69
N O I T A M R O F N I L A C I N H C E T
MATERIALS
N O I T A M R O F N I L A C I N H C E T
Brown coal Butter Calcinated hydrated alumina Calcined crushed raw gypsum Calcium chloride cyanamide phosphate sulphate Cassiterite: SnO2 tin oxide Cast iron Caustic potash soda Cement Cerrusite (Pb Co3) Chicken droppings Chlorinated paraffin Chromic acid Citric acid Clinker Coal: anthracite b a l ls bituminous smalls Cocoa in beans (fatty) Coffee (beans) Coffee pods Coke Colza Concrete Copper sulphate Copra (oleaginous) Cork Corncobs Cottonseed flour (vegetable fat)
Concentration
Material temperature °C
ambient
ambient ambient ambient ambient
20 50
80 120
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
++ / ++ ++
++ / ++ ++
++ / ++ ++ ++
++ / ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++
++ ? ++ ++ ++ / / ++ ++
++ + ++ ++ ++ ++ / / ++ ++
++ ++ / ++ / ? ++ ++ +? +? ++ ++ / ++ ++ / /
++ ++ / ++ / ? ++ ++ +? +? ++ ++ / ++ ++ / /
GM JGM JGS
CR V
++ + ++ ++ ++
++ / ++ ++ ++
++ / ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ / / ++ ++
++ ++ ++ ++ ++ ++ / / ++ ++
++ ? ++ ++ ++ ++ + / ++ ++
++ ? ++ ++ ++ ++ /
++
++
++
++ ++ / ++ ? ? ++ ++ +? +? ++ ++ / ++ ++ / /
++ ++ ? ++ / ? ++ ++ ? ? ++ ++ / ++ ++ / /
++ ++ + ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ?
++ ++
++ ++
++ ++ + ++ ++ + +? ++ ++
++
++ ++ / /
++++ ++ ++
++ ++ +? +? ++ ++ ++ ++
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
70
MATERIALS
Concentration
Creosote (guaiacol) Crushed grape pips (fatty acid) Crushed shells Cr yolite, sodium alumino-fluorine Cullet (crushed glass) Cupric chloride Damp clay Diesel fuel (products impregnated with) Diethylene glycol
Material temperature °C
ambient
/ 20 50
Dog food Dolomite Dry and damp gravel Dry clay Ethanol
20 50
Feldspar Ferric chloride Fertilisers (except with presence of ammonium nitrate) Fertilisers with presence of ammonium nitrate
< 70 70
110
Fertilisers with presence of fatty substances
Fired bricks Flint Formic acid Foundry sand Fuel oil Gasoline (products impregnated with) Glucose Glycol esters Grape-cake Hard limestone Hay in pressed bales Household waste (fatty)
ambient
20 50 ambient
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
/ ? ++ ++ ++ ++ ++ / ++ ++
/ ? ++ ++ ++ ++ ++ / ++ ++
/ ? ++ ++ ++ ++ ++ / ++ ++
/ ? ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ / ++ ++
+ ++ ++ ++ ++ ++ / ++ ++
? ++ ++ ++ + ? ++ ++
? ++ ++ ++ + ? ++ ++
? ++ ++ ++ ++ ++ ++ ++
? ++ ++ ++ ++ ++ ++ ++
+ ++ ++ ++ ++ ? ++ ++
++ ++ ++ + ? ++ ++
++ ? /
++ ++ ?
++ ++ ++
++ ++ ++
++ ? /
++ ? /
/ ++ ++ + ++ / / ++ ? / ++ ++ ++ ?
/ ++ ++ + ++ / / ++ ? / ++ ++ ++ ?
/ ++ ++ + ++ / / ++ ++ ++ ++ ++ ++ ?
/ ++ ++ + ++ / / ++ ++ ++ ++ ++ ++ ?
? ++ ++ / ++ ++ ++ ++ / / ++ ++ ++ ++
/ ++ ++
GM JGM JGS
++ / / ++ / / ++ ++ ++ ?
CR V
++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++
++ ++ ++ / / ++
++ ++ ++ +
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
71
N O I T A M R O F N I L A C I N H C E T
MATERIALS
Concentration
Hydrated alumina + caustic soda Hydrated lime Hydrocarbons (products impregnated with): aliphatic aromatic chlorinated Hydrochloric acid Diluted 37%
Material temperature °C
60
<70 >70 70 max.
Iron sulphate Isobutanol
20 50
Isopropanol N O I T A M R O F N I L A C I N H C E T
20 50
Kaolin Kerosene
Lactic acid Lilamine Limestone flux Loose or crushed glass: with oil … without oil Loose wood (logs) Magnesia Magnesium chloride sulphate Malt (grains) with presence of fat Manganese (magnesia dioxide and manganese chloride) Manganese chloride dioxide Marble Marl Mercur y chloride Metallurgical coke Pitch and tar road coating
20 50 ambient 40
ambient
90 ambient ambient
100 max.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
++ ++
++ ++
+ ++
+ ++
+ ++
/ / / + / / ++ + +
/ / / + / / ++ + +
/ / / ++ ++ ++ ++ ++ ++
/ / / ++ ++ + ++ ++ ++
++++ ? ? ++ / / ++ + ?
++ + ?
++ ++ ++
+ + ++ / /
+ + ++ / /
++ ++ ++ / /
++ ++ ++ / /
+ ? ++ ++ ++
+ + ++ ? /
++ ++ ++ ? /
? / ++
? / ++
? / ++
/ ++
? ++ ++
/ ++
++
/ ++ ++ ++ ++ ++ ? ++
/ ++ ++ ++ ++ ++ ? ++
/ ++ ++ ++ ++ ++ ? ++
/ ++ ++ ++ ++ ++ ? ++
++ ++ ++ ++ ++ ++ ++ ++
? ++ ++ ++ ++ ++ ? ++
++ ++ ++ ++ ++ /
++ ++ ++ ++ ++ /
++ ++ ++ ++ ++ /
++ ++ ++ ++ ++ /
++ ++ ++ ++ ++ +
++ ++ ++ ++ ++
GM JGM JGS
CR V
++
++
/ / /
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
72
MATERIALS
Concentration
Metaoxybenzoic acid or cresol Monochlorobenzene Monoethylene glycol
Material temperature °C
70 max. 20 50 20 50
Naphtha 5% fatty solid naphthaline Nickel
chloride sulphate
Nitric acid
Nonanol
45% 30% 17% Diluted
ambient ambient ambient ambient 20 50
Oats Oils (products impregnated with): mineral other synthetic vegetable Oleic acid Ordinary alumina Oxalic acid Palmitic acid Paper pulp Peanuts broken in shells Pebbles Perborate Phosphoric acid Porphyry Potassium chloride cyanide sulphate
ambient 70 max.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
/ / ++ ++ / / /
/ / ++ ++ ? / /
/ / ++ ++ / / /
++ ++
++ ++
/ / ? ? + + ++
GM JGM JGS
CR V
/ ++ ++ / / /
+ / ++ ++ / / ?
/ ++ ++ / / /
/ ++ ++ /
++ ++
++ ++
++ ++
++ ++
++ ++
/ / ? ? + + ++
? + + + ++ ++ ++
? ? ? ? + + ++
/ / / / + + ++
+ + ++
++ ++
/ / / /
/ / / /
/ / / /
/ / / /
? ? ? ++
/ / / ++
? ++ +
? ++ + ? ++ / ++ ++ + ? ++ ++ ++ ++
? ++ ++ ? ++ / ++ ++ ++ ? ++ ++ ++ ++
? ++ ++ ? ++ /
++ ++ + ? ++ ++ ++ ++ ? ? ++ ++ ++ ++
++ / ++ ++ + ? ++ ++ ++ ++
++ ++ + ++ ++ ++ ++
/
++
++
++ ++
++
++ ? ? ++ ++ ++ ++
++ ? ++ ++ ++ ++
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
73
N O I T A M R O F N I L A C I N H C E T
MATERIALS
N O I T A M R O F N I L A C I N H C E T
Powde Pow dere redd as asph phal alt + .6 .6% % bi bittum umen en Powder y plaster Pozzolana Pyrites Quartz Quartzite Quick lime Raw bituminous materials Raw crushed granite Resinous wood (pine) Rock salt Round pebbles Sand Sandstone Sea salt Shale Slag Slate Slurry ry:: Silico aluminate Soda solution Sodium silicate H2O Sodium silicate HO 33%
Concentration
Material temperature °C
1000 max 10 ax..
Ambient
Soda ash Soda ash Calcium carbonate Soda ash Potash Sodium bisulphate Sodium borate (borax) chloride cyanide perborate peroxide silicate sulphate Solid pitch (sticks) Soya (fatty acid) Stearic acid Stearine
100 ambient
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
? ++ ++ ++ ++ ++ ++ ++ ++ ? ++ ++ ++ ++ ++ ++ ++ ++
? ++ ++ ++ ++ ++ ++ ++ ++ ++ ? ++ ++ ++ ++ ++ ++ ++ ++ ++
? ++ ++ ++ ++ ++ ++ ++ ++ ++ ? ++ ++ ++ ++ ++ ++ ++ ++ ++
/ ++ ++ ++ ++ ++ ++ ++ ++ ++ ? ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++
++
+
+
+
++ ++ ++ ++ ++ ++ ++ ? ? ++ ++
++++ ++ ++ ++ ++ ++ ++ ? ? ++ ++
++++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++++ ++ ++ ++ ++ ++ ++ ++ + ++ ++
++++ ++ ++ ++ + ++ ++ ? ? ++ ++
? ? ? ?
? ? ? ?
? ? ? ?
? ?
++ ++ + ++
?
GM JGM JGS
CR V
++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++
++ + ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ? ++ ++ ++ ++ ++ ++ ++ ++ ++
++++ ++ ++ ++
++++ ++ ++ ++
++ ++ ? ? ++ ++
++ ++
++ ++
+ +
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
74
MATERIALS
Straw in bales Sulphonic acid Sulphur Sulphuric acid
Concentration
Material temperature °C
DXY WR KS
TEA T1
COVER GRADE G TEB TEC JGF
++ ++ + ++ ? / ++ / ++ ++ ++ / /
++ ++ + ++ ++ ? ++ / + ++ ++ / /
++ ++ + ++ ++ ? ++ /
20 50
++ ++ + ++ ? / ++ / ++ ++ ++ / /
20 50
+? / /
+? / /
+? / /
? ++
? ++
++ ++
ambient < 10% 10 to 75% > 75%
Talc Tar Tin tetrachloride Uranium (ore) Wheat (untreated) White Spirit
Wood chip Xylene
Zinc chloride Zinc sulphate
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
GM JGM JGS
CR V
++ ++
++ ++ + ++ / / ++ /
++ / / ++ /
++ ++ / /
++ ++ + ++ ? / ++ ? ++ ++ ++ ++ ++
++ ++ ? /
++ ++ ? /
? / /
++ / /
++ / /
+ / /
++
? ++
++
++
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
75
N O I T A M R O F N I L A C I N H C E T
MINIMUM DIAMETER OF PULLEYS The minimum diameters of the pulleys of belt conveyors are determined by taking into account: the construction of the belt, its weight and the type of splicing. Three types of pulleys are distinguished: • Tension pulleys and other pulleys located in the area of highest tension of the belt • Tail pulleys and other pulleys located in the area of lowest tension of the belt • Snub or bend pulleys which do not change the direction of the belt by more than 30°. The minimum diameter of a pulley also varies according to the tension in the belt. For high types, do not forget that the weaker the surface pressure on the pulley, the better the (belt/pulley) adhesion coefficient will be Pulley diameters greater than the recommended minimum diameters will increase the service life of the belt. For large cover thicknesses, it is recommended to increase the diameters of the pulleys. For belts not indicated in this table, please consult our technical departments.
Textile belts Belt family N O I T A M R O F N I L A C I N H C E T
TRANSUNIT
ROUGTOP TRANSGLIS
TRANSPLY TRANSOIL MULTIPLY TRANSFLAM TRANSOIL TRANSTHERM
MULTITRANS / EP TRANSFLAM TRANSTHERM RIP-STOP TRANSOIL
CTS/TTS
250/2 400/3
250/2 315/2
400/3
500/3 630/3 630/4 800/3 1000/3
Minimum diameter of pulleys in mm
Tension in belt (%)
Drive
Tail and tension
Snub and bend
> 60 % 30 to 60 % < 30 %
250 200 160
200 160 125
16 0 125 10 0
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
250 250 200 315 315 250
200 200 160 250 250 200
16 0 160 160 20 0 200 16 0
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
250 250 200 31 5 315 250 3 15 315 25 0
200 200 160 250 250 200 250 250 200
16 0 160 16 0 20 0 200 16 0 2 00 2 00 16 0
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
400 400 315 500 400 400 630 500 400
400 315 250 4 00 315 250 50 0 40 0 31 5
31 5 250 250 315 250 250 4 00 315 31 5
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
76
Textile belts (continued) Belt family
MULTITRANS / EP TRANSFLAM TRANSTHERM RIP-STOP TRANSOIL (continued)
800/4 800/5 1000/4 1000/5 1250/3 1250/4 1600/4 1250/5 1250/6 1500/3 1600/5 1800/3 1800/5 1600/6 2000/4 2000/5 2500/5 3150/5
TRANSRIGID XST2 TRANSPROFIL CD 15 TRANSPROFIL CD 25
POLYAMIDE PP
500/3 250/2 400/3 250/2 400/3 400/2 500/2 630/2 630/3 800/2 800/3 800/4 1000/2 1000/3 1000/4 1250/2 1000/5 1250/3 1250/4 1250/5 1500/3 1600/4 1800/3 1600/5 1800/5 2000/4 2000/5 2250/5 2000/6 2500/4 3150/4
Minimum diameter of pulleys in mm
Tension in belt (%)
Drive
Tail and tension
Snub and bend
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
800 630 500 1 00 0 800 630
630 50 0 400 800 6 30 500
50 0 400 31 5 630 500 400
> 60 % 30 to 60 % < 30 %
1 25 0 1000 800
1000 8 00 630
800 630 500
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
1400 1250 1000 1 60 0 1400 1 25 0 1 80 0 1600 1 25 0 250 250 200
1250 1000 800 1400 1250 1000 1600 1400 1250 200 2 00 160
1000 800 63 0 1000 1000 800 1250 1000 800 160 160 160
All tensions
315
31 5
///////
All tensions > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
400 315 250 200 400 315 250
40 0 250 2 00 160 315 25 0 200
/////// 200 160 125 25 0 200 16 0
> 60 % 30 to 60 % < 30 %
500 400 315
400 3 15 250
315 250 200
> 60 % d e 30 a 60 % < 30 % > 60 % d e 30 a 60 % < 30 %
630 500 400 800 630 500
500 400 315 630 500 400
400 315 250 50 0 4 00 31 5
> 60 % d e 30 a 60 % < 30 %
1000 8 00 630
800 630 500
63 0 5 00 40 0
> 60 % d e 30 a 60 % < 30 %
1250 1 00 0 800
1000 800 630
80 0 6 30 50 0
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
77
N O I T A M R O F N I L A C I N H C E T
Textile belts (continued) Belt family
TRANSLEV EDG TRANSLEV LPWH
BIATHLON TRIATHLON
340 350 463 480 4100 4125 400/2 500/2 630/2 800/2 1000/2 1250/2
Minimum diameter of pulleys in mm
Tension in belt (%)
Drive
Tail and tension
Snub and bend
All tensions All tensions All tensions All tensions All tensions > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
400 400 400 400 400 40 0 315 31 5 500 400 400 630 500 400 800 630 500
400 400 400 400 400 315 315 250 400 315 315 500 400 315 630 500 400
/////// /////// /////// /////// /////// 25 0 250 25 0 31 5 315 250 400 315 31 5 50 0 400 31 5
N O I T A M R O F N I L A C I N H C E T
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
78
Metal belts Belt family
500 630 METALCORD M METALTRANS M AUTOSTABLE M
METALCORD E METALTRANS E
ST belt cord diameter 3.7, 4.4 and 5.2 mm ST belt cord diameter 6.8 and 7.6 mm ST belt cord diameter 8.2 and 8.8 mm ST belt cord diameter 9.6 and 10.6 mm ST belt cord diameter 11.2
TRANSLEV LPM
800 1000 1250 1400 1600 1800 2000 800 1000 1250 1400 1600 1800 2 00 0 2250 2500 2800 3150 3500 4000 800 1000 1400 1500 1600 2250 2500 3150 3500 4000 4500 5000 5 40 0 1000 1250 1600 2000
Minimum diameter of pulleys in mm
Tension in belt (%)
Drive
Tail and tension
Snub and bend
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
4 00 31 5 2 50 5 00 4 00 315 6 30 5 00 4 00 8 00 63 0 500
315 250 250 400 315 315 500 400 315 630 500 400
250 200 200 315 2 50 2 50 400 3 15 250 630 500 400
> 60 % 30 to 60 % < 30 %
630 500 400
500 400 315
400 3 15 315
> 60 % 30 to 60 % < 30 %
800 630 500
630 500 400
500 400 31 5
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
1 00 0 800 630 1 25 0 1 0 00 800
800 630 500 1 0 00 800 630
630 5 00 500 800 6 30 630
> 60 % 3 0 to 6 0 % < 30 %
800 630 500
630 500 400
500 400 31 5
> 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 % > 60 % 30 to 60 % < 30 %
1250 1000 80 0 1400 1250 1000 1600 1400 1 2 50 1 8 00 1 6 00 1 25 0
1 0 00 800 630 1 2 50 1 0 00 800 1 4 00 1 2 50 1 0 00 1600 1250 1 0 00
800 6 30 500 1000 800 630 1250 1000 800 1250 1000 800
All tensions
800
800
///////
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
79
N O I T A M R O F N I L A C I N H C E T
TENSION TRAVEL NECESSARY FOR BELTS The adjustment of the tension travel depends on: load
• The centre distance of the conveyor and its working tension • The conveyor starting and stopping system. • The position of the tension system • The nature of the carcass of the belt
d a o l g n i k a e r b t l e b
The elongation of a belt is broken down into two parts: the permanent elongation and the elastic elongation. In certain cases it is possible to reduce the tension travel by complying with certain procedures • Either during manufacturing • Or during placing of the belt in endless configuration on the operating site. Consult our technical departments.
N O I T A M R O F N I L A C I N H C E T
Permanent Elastic elongation elongation Total elongation
For textile belts, the permanent elongation and the elastic elongation are divided into two roughly equal parts for weak types; the permanent elongation increases with the type of belt because of the greater crimping of the constituent fabrics. For metal belts the elongation consists of approximately 1/5th permanent elongation and 4/5ths elastic elongation. Tension travel to be provided for according to the belt family (see table on following page). On conveyors with small centre distances, it is necessary to allow a minimum tension travel in order to be able to place the belt in endless configuration.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
80
(continued)
Tension travel (continued) Belt family
Min. te tensi sio on trtravel as as pe percentage of conveyor centre distance
Textile belts • TRANSPLY • MULTIPLY • MUL MULTI TITRAN T RANSS / EP • PP POLYAMIDE
• BIATHLON • TRIATHLON • RIP-STOP • TRANSFLAM • TRANSTHERM • TRANSOIL • TRANSLEV EDG • TRANSLEV LPWH • TRANSPROFIL • TRANSUNIT • ROUGH TOP • TRANSGLIS • TRANSRIGID XST2
1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.55 % of 1. of cen centrtree dis dista tanc ncee wit with a mi mini nimu mum m of 0. 0.33 m dcentre distance < 50 m 3 % of centre distance with a minimum of 0.6 m centre re dista distance nce 50 50 m to 300 300 m 2.5 % of centr centree distan distance ce cenntre dis ce dista tannce > 30 300 m 1.5 % of ce centre di distance 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m 1.5 % of centre distance with a minimum of 0.3 m
Metal belts • METALCORD M • METALCORD E • METALTRANS M • ME METALTRANS E • AUTOSTABLE M • ST belt • TRA TRANS NSTH THER ERM M MWH MWH • TRANSLEV LPM • TRA TRAN NSR SRIG IGID ID XM XMM M
Type ≤ 1600 N/ N/mm 0.5 % of ce centrtree di distance wit with a min iniimum of of 0. 0.3 m Type 1800 and and 2000 N/mm 0.35 % of centre distance with a minimum of 0.3 m 0.25 % of of centre distance with a minimum of 0.3 m Type ≤ 1600 N/ N/mm 0.5 % of ce centre di distance wit with a minim imuum of of 0. 0.3 m Type 1800 and and 2000 N/mm 0.35 % of centre distance with a minimum of 0.3 m 0.25 % of centre di distance wi with a minimum of 0. 0.3 m Type ≤ 1600 N/ N/mm 0.5 % of ce centrtree di distance wit with a min iniimum of of 0. 0.3 m Type 1800 and and 2000 N/mm 0.35 % of centre distance with a minimum of 0.3 m 0.25 % of centre distance with a minimum of 0.6 m for centre distance < 200 m 0.25 % of centre distance with a minimum of 1.5 m for centre distance > 200 m 0.55 % of ce 0. cent ntre re di dist stan ance ce wi with th a min minim imum um of 0. 0.33 m 0.3 % of of centre distance with a minimum of 0.3 m 0.55 % of ce 0. cent ntre r e di dist stance a nce wi with th a min minim imum um of 0. 0.33 m
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
81
N O I T A M R O F N I L A C I N H C E T
TROUGH TRANSITION LENGTH The distance between the first full trough station and the drive pulley or the tail pulley must be adjusted to avoid an excess tension of the edges in the transition area or compression of the central part if the tension is weak. There are two trough transition length possibilities. Case no. 1 Minimum trough transition length with upper generatrix of the pulley in the axis of the generatrix of the centre roller of the carrying stations.
TROUGH TRANSITION LENGTH
DEPTH FULL TROUGH DEPTH FULL
EDGE OF BELT
CENTRE LINE
CENTRE OF BELT
N O I T A M R O F N I L A C I N H C E T
LAST TROUGH SUPPORT
HEAD PULLEY
Textile belts • TRANSPLY • MULTIPLY • MULTITRANS / EP • BIATHLON • TRIATHLON • RIP-STOP • TRANSFLAM • TRANSTHERM • TRANSOIL • TRANSPROFIL
Metal belts • METALCORD M • METALTRANS M • AUTOSTABLE M • TRANSTHERM MWH • METALCORD E • METALTRANS E
Percentage of rated tension
30 degrees
TROUGH ANGLE 35 degrees
45 degrees
> 90 %
1. 5 x I
1 .9 x I
2 .8 x I
60 to 90 %
1. 3 x I
1 .5 x I
2 .2 x I
< 60 %
1. 0 x I
1 .2 x I
1 .7 x I
Percentage of rated tension
30 degrees
TROUGH ANGLE 35 degrees
45 degrees
> 90 % 60 to 90 % < 60 % > 90 % 60 to 90 % < 60 %
1. 7 x I 1. 5 x I 1. 3 x I 2. 1 x I 1. 9 x I 1. 6 x I
2 .1 x I 1 .9 x I 1.6x I 2 .5 x I 2 .2 x I 1 .8 x I
3.0 x I 2 .6 x I 2 .3 x I 3 .4 x I 3.1 x I 2.7 x I
l : width of belt
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
82
Case no. 2 Minimum trough transition length with centre line of the pulley raised with respect to the face of the centre roller of the carrying idlers by one third of the height of the trough.
TROUGH TRANSITION LENGTH
EDGE OF BELT
CENTRE LINE
CENTRE OF BELT LAST TROUGH SUPPORT
Textile belts
HEAD PULLEY
Percentage of rated tension
30 degrees
TROUGH ANGLE 35 degrees
45 degrees
> 90 %
1 .2 x I
1.5 x I
2.3 x I
• TRANSPLY • MULTIPLY • MULTITRANS / EP • BIATHLON • TRIATHLON • RIP-STOP • TRANSFLAM • TRANSTHERM • TRANSOIL • TRANSPROFIL • PP POLYAMIDE
Metal belts
MID-DEPTH OF TROUGH
60 to 90 %
1 .1 x I
1 .2 x I
1.8 x I
< 60 %
0 .8 x I
1 .0 x I
1.4 x I
All tensions
0 .9 x I
1 .1
1.3 x I
Percentage of rated tension
30 degrees
TROUGH ANGLE 35 degrees
45 degrees
> 90 % 60 to 90 % < 60 % > 90 % 60 to 90 % < 60 % All tensions
1 .3 x I 1.2 x I 1 .0 x I 1 .7 x I 1 .5 x I 1 .3 x I 1.75 x I
1.7 x I 1.5 x I 1.3 x I 2.0 x I 1.8 x I 1.5 x I 2.0 x I
2.4 x I 2.1 x I 1.8 x I 2.7 x I 2.5 x I 2.2 x I 2.55 x I
• METALCORD M • METALTRANS M • AUTOSTABLE M • TRANSTHERM MWH • METALCORD E • METALTRANS E • ST belt l : width of belt
Elevation of pulley with respect to face of centre roller of carrying idlers: the table below indicates this value for 30° and 45° troughs in mm. Trough angle
30° 45°
500 22 ////
650 31 40
800 36 47
1 0 00 48 62
Width of belt
1200 56 72
1 4 00 68 87
1600 78 100
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
1 8 00 89 114
2000 100 127
2250 115 147
2400 125 157
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
83
N O I T A M R O F N I L A C I N H C E T
RADIUS OF CURVATURE RADIUS WITH CENTRE ABOVE (CONCAVE)
RADIUS WITH CENTRE BELOW (CONVEX) The approximate values which can be used to determine the radius of curvature are indicated below. Note 1: For convex radius (centre below), it is recommended to reduce the trough angle by 5 to 10° and eliminate any pinching of the rollers in this area. Note 2: For concave radius (centre above), it is generally the empty belt non-lifting conditions which determine the minimum radius values. Textile belts:
N O I T A M R O F N I L A C I N H C E T
TRANSPLY, MULTIPL TRANSPLY, M ULTIPLY Y, MULTITRANS, M ULTITRANS, EP, PP POLY POLYAMIDE, AMIDE, BIATHLON, TRIATHLON, RIP-STOP,, TRANSFLAM, TRANSTHERM, TRANSOIL, TRANSPROFIL RIP-STOP Approximate values for minimum radius of curvature in mm TROUGH ANGLE CONCAVE CURVE CONVEX CURVE (degrees) Centre above Centre below
20° 25° 30° 35° 40° 45°
13 x I 15 x I 20 x I 26 x I 32 x I 38 x I
15 x I 18 x I 23 x I 29 x I 35 x I 41 x I
l : width of belt
To determine radius of convex curvature, it must be checked that the difference in tension between the centre and the edges does not exceed 0.8 %.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
84
M cord metal belts:
METALCORD M, METALTRANS M, TRANSTHERM MWH, AUTOSTABLE M Approximate values for minimum radius of curvature in mm TROUGH ANGLE CONCAVE CURVE CONVEX CURVE (degrees) Centre above Centre below
20° 25° 30° 35° 40° 45°
20 x I 25 x I 35 x I 45 x I 55 x I 65 x I
25 x I 30 x I 40 x I 50 x I 60 x I 70 x I
l : width of belt
E cord metal belts:
METALCORD E, METAL M ETALTRANS TRANS E Approximate values for minimum radius of curvature in mm TROUGH ANGLE CONCAVE CURVE CONVEX CURVE (degrees) Centre above Centre below
20° 25° 30° 35° 40° 45°
40 x I 50 x I 60 x I 70 x I 80 x I 90 x I
35 x I 40 x I 60 x I 70 x I 80 x I 90 x I
l : width of belt
ST belt / SEMPERCORD metal belts Approximate values for minimum radius of curvature in mm TROUGH ANGLE CONCAVE CURVE CONVEX CURVE (degrees) Centre above Centre below
25° 30° 35° 40° 45°
52 x I 77 x I 90 x I 103 x I 115 x I
64 x I 77 x I 90 x I 103 x I 115 x I
l : width of belt
To determine radius of convex curvature, it must be checked that the difference in tension between the centre and the edges does not exceed 0.2 %.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
85
N O I T A M R O F N I L A C I N H C E T
TURNOVER
Free turnover (180 degrees): the belt is guided between two vertical pulleys Forced turnover: for belts of width less than or equal to 1200 mm, the belt is guided by supports. For widths greater than 1200 mm, all along the turnover the belt must be guided and supported by special rollers.
BELT TYPE
Minimum turnover length l = width of belt
Textile belts:
N O I T A M R O F N I L A C I N H C E T
TRANSPLY, MULTIPLY, MULTITRANS, EP, PP POLYAMIDE, BIATHLON, TRIATHLON, RIP-STOP, TRANSFLAM, TRANSTHERM, TRANSOIL,
13 x I:
M cord metal belts: METALCORD M, METALTRANS M, TRANSTHERM MWH, AUTOSTABLE M,
E cord metal belts: METALCORD E, METALTRANS E
16 x I
20 x I
ST belt metal belts: ST belt
2 4 .8 x I
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
86
MAXIMUM CLEARANCE OF CARRYING IDLERS AND RETURN ROLLERS IMPORTANT REMARK: • At the loading point, the carrying idlers must be closer together • If the unit weight of the blocks is high, reduce the values indicated opposite by up to 50 %.
Belt family Textile belts
Maximum clearance in metres
• TRANSPLY • MULTIPLY • MULTITRANS / EP • PP POLYAMIDE • BIATHLON • TRIATHLON • RIP-STOP • TRANSFLAM • TRANSTHERM 2 plies 3 plies or more • TRANSOIL 2 plies 3 plies or more • TRANSPROFIL • TRANSUNIT CC / CT TT / TTS • ROUGHTOP • TRANSGLIS • TRANSRIGID
Metal belts
• METALCORD M • METALCORD E • METALTRANS M • METALTRANS E • AUTOSTABLE M • ST belt • TRANSTHERM MWH • TRANSRIGID
Carr ying idlers
Return rollers
1 .5 1 .5 2 2 2 2 1 .5 2 1.5 2 1 .5 2 1 1 ////// sliding face ////// sliding face ////// sliding face 2
4 4 4 4 4 4 4 4 4 4 4 4 3 3 3 3 3 4
Carr ying stations
Return rollers
2 2 2 2 2 2 2 2
4 4 4 4 4 5 4 4
MAXIMUM ROLLER SKIRT SPACING Maximum roller skirt spacing, recommended values as per recommendation of standard ISO 1537: 10 mm IMPORTANT REMARK: the tolerated values indicated opposite are valid provided that the troughing conditions are complied with.
Belt family Textile belts
Maximum roller skirt spacing (tolerated values in mm)
• TRANSPLY • MULTIPLY • MULTITRANS / EP • PP POLYAMIDE • BIATHLON • TRIATHLON • RIP-STOP • TRANSFLAM • TRANSTHERM • TRANSOIL • TRANSPROFIL
2-roller trough
3-roller trough
2-roller trough
3-roller trough
15 15 20 20 20 20 20 20 20 20 20
Metal belts
• METALCORD M • METALCORD E • METALTRANS M • METALTRANS E • AUTOSTABLE M • ST belt • TRANSTHERM MWH
20 20 20 20 ////// 20 20
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
20 20 30 30 30 30 30 30 30 30 30
30 30 30 30 30 30 30
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
87
N O I T A M R O F N I L A C I N H C E T
BELT SPLICING TEXTILE BELTS - hot splicing: step or fingers - cold gluing for anti-abrasive grades in the lowest types. Carrying cover
Skim gum
Cover gum
Reinforcement fabric Skim gum
Skim gum (1)
Skim gum Skim gum Cover gum MULTIPLY BELT
STEPPING
Reinforcement fabric Direction of movement
Direction of movement ASSEMBLY
Step splice
N O I T A M R O F N I L A C I N H C E T
Reverse side cover
Fingers splice
Splicing method by belt family and belt type Belt family
• TRANSPLY TRANSPLY • MULTIPL MULTIPLYY • MULTITRANS / EP Type 1000 N/mm Type > 1000 N/mm • PP POLY POLYAMID AMID • BIATHLON • TRIATH TRIATHLON LON • RIP-STOP • TRANSFLAM • TRANSTHERM • TRANSOIL • TRANSLEV EDG • TRANSLEV LPWH • TRANSPROFIL • TRANSUNIT CTS TTS • ROUGH TOP • TRANSGLIS • TRANSRIGID XST2 XST2 ≤
Cold gluing
Step splicing
YES YES
YES YES
YES NO YES NO NO NO NO NO NO NO
fingers splicing
YES YES YES NO NO YES YES YES YES YES 2 steps Splicing prohibited: these belts must be fastener jointed NO YES NO YES Possible YES Possible YES NO NO
NO YES
YES YES NO YES YES YES YES YES YES NO NO NO NO NO YES
Procedures available on request from our sales department.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
88
BELT SPLICING (continued)
METAL BELTS - hot splicing - for temporary repairs, fasteners are possible on METALCORD AND METALTRANS For belts with small cords, splicing in fingers or imbrication depending on the pitch of the cords. For belts with large cords or construction as per DIN 22131, splicing by interweaving in accordance with the method recommended by this standard.
Direction of movement
Belt family
• METALCORD M Type 500 and 630 N/mm Type ≥ 630 N/mm • METALTRANS E Type 800 and 1000 N/mm Type de 1250 to 2000 N/mm • METALCORD E Type 800 and 1000 N/mm Type de 1250 to 2000 N/mm Type ≥ 2500 N/mm • ST belt • AUTOSTABLE • TRANSRIGID XMM • TRANSLEV LPM • TRANSTHERM MWH
Splicing in fingers
Splicing by imbrication
YES YES
YES 1 step NO
YES YES
YES 1 step NO
YES YES NO
YES 1 step NO YES stepping as per DIN method YES stepping as per DIN method YES NO YES NO Consult our technical departments YES YES 1 step
Procedures available on request from our sales department. IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
89
N O I T A M R O F N I L A C I N H C E T
N O I T A M R O F N I L A C I N H C E T
p e t s 1
p e t s 2
p e t s 3
p e t s 4
Splicing by imbrication as per DIN 22131 method.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
90
SEMPERTRANS® is one of the world’s biggest conveyor belt producers. Built on the foundation of SFBT, the SEMPERTRANS® division acquired two new production sites in
2000 and 2001:
SEMPERTRANS® BELCHATOW SA in Poland and SEMPERTRANS® NIRLON LTD in India.
SEMPERTRANS® FRANCE BELTING TECHNOLOGY
Under the name SEMPERTRANS® FRANCE BELTING TECHNOLOGY, SFBT is one of the biggest conveyor belt producers in Europe. Its products are exported all over the world. Based on 50 years of experience, SFBT’s know-how covers a wide range: complete studies and determining of appropriate products. Certified under ISO 9001.
SEMPERTRANS ® BELCHATOW SA
SEMPERTRANS® BELCHATOW SA has one of the biggest production capacities in Europe. These large-scale means of production are particularly well suited to the manufacturing of large STEELCORD type METAL METAL belts. Certified under ISO 9001.
SEMPERTRANS® NIRLON LTD
Specialising in the manufacturing of textile conveyor belts, SNL is a production and distribution site for the SEMPERTRANS ® Division in Asia. Certified under ISO 9001.
IMPORTANT NOTICE: This brochure has been prepared carefully, to advise our
Please note: Before using the product in new areas of application which are not covered
customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard ;
Subject to errors and printing errors. Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions. 2nd edition Subject to changes.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
91
PRODUCTION SITES FRANCE Sempertrans® France Belting Technology S.A.S.
F- 95104 Argenteuil Cedex 10 Rue des Charretiers Telephone + 33 1 30 25 72 00 Fax + 33 1 30 25 72 54 E-mail: [email protected] POLAND Sempertrans® Belchatow S.A.
PL – 97427 Rogowiec, Belchatow Telephone + 48 44 731 35 00 00 Fax + 48 44 731 35 15 E-mail: office@sempertransbelchatow [email protected] .pl INDIA Sempertrans® Nirlon Ltd
Pahadi Village Mumbai 400 063 MAHARASTRA Telephone + 91 222 68 50 234 Fax + 91 222 68 50 35 E-mail: [email protected] CHINA Sempertrans® Best (Shandong) Belting Co., Ltd.
West ChangAn Road.T Road.Taierzhuang aierzhuang District.Zaozhuang. Shandong Post code:277400 Telephone: + 86-632-6677668