Training-Manual_AutoCAD-Plant-3D_Advanced_English_2013

Chapter

X

Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be reproduced in any form, by any method, for any purpose. Certain materials included in this publication are reprinted with the permission of the copyright holder. The data from DIN Standards are used by permission of DIN Deutsches Institut für Normung e. V. They conform with the current version of the DIN Standards concerned (December 1, 2007, Autodesk) The JIS symbols in this product are used by Autodesk under permission from JIS. ISA Symbols © ISA © Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin ISO 10628:1997 Symbols © The International Organization for Standardization (ISO) ISO 14617-5:2002 Symbols © The International Organization for Standardization (ISO) ISO 14617-6:2002 Symbols © The International Organization for Standardization (ISO) ISO 3511-1:1977 Symbols © The International Organization for Standardization (ISO) ISO 3511-2:1984 Symbols © The International Organization for Standardization (ISO) ISO 3511-3:1984 Symbols © The International Organization for Standardization (ISO) DIN 2481:1979-06 Symbols © Deutsches Institut für Normung e. V. (DIN) JIS Z 8204:1983 Symbols © Japanese Industrial Standard (JIS) AutoPLANT is a registered trademark of Bentley Systems, Incorporated.

Trademarks The following are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and other countries: 3DEC (design/logo), 3December, 3December.com, 3ds Max, Algor, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk Envision, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap, AutoSketch, AutoTrack, Backburner, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Civil 3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer, Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer, DesignStudio, Design Web Format, Discreet, DWF, DWG, DWG (logo), DWG Extreme, DWG TrueConvert, DWG TrueView, DXF, Ecotect, Exposure, Extending the Design Team, Face Robot, FBX, Fempro, Fire, Flame, Flare, Flint, FMDesktop, Freewheel, GDX Driver, Green Building Studio, Heads-up Design, Heidi, HumanIK, IDEA Server, i-drop, ImageModeler, iMOUT, Incinerator, Inferno, Inventor, Inventor LT, Kaydara, Kaydara (design/logo), Kynapse, Kynogon, LandXplorer, Lustre, MatchMover, Maya, Mechanical Desktop, Moldflow, Moonbox, MotionBuilder, Movimento, MPA, MPA (design/logo), Moldflow Plastics Advisers, MPI, Moldflow Plastics Insight, MPX, MPX (design/logo), Moldflow Plastics Xpert, Mudbox, Multi-Master Editing, Navisworks, ObjectARX, ObjectDBX, Open Reality, Opticore, Opticore Opus, Pipeplus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, RasterDWG, RealDWG, Real-time Roto, Recognize, Render Queue, Retimer,Reveal, Revit, Showcase, ShowMotion, SketchBook, Smoke, Softimage, Softimage|XSI (design/logo), Sparks, SteeringWheels, Stitcher, Stone, StudioTools, ToolClip, Topobase, Toxik, TrustedDWG, ViewCube, Visual, Visual LISP, Volo, Vtour, Wire, Wiretap, WiretapCentral, XSI, and XSI (design/logo). All other brand names, product names, or trademarks belong to their respective holders.

Disclaimer THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY CAD STUDIO ABCOM GMBH !AS IS." CAD STUDIO ABCOM GMBH DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS. Published by: CAD STUDIO ABCOM GMBH Schellerdam 16 21079, Hamburg, Germany

© 2012 CAD STUDIO ABCOM GMBH. All rights reserved.

Chapter

1 Table of Contents General introduction to the book ....................................................................................... 6 Additional comments and notes.... .......................................................................................................... 7 Glossary .................................................................................................................................................... 8 AutoCAD Plant 3D Commands ................................................................................................................ 14 AutoCAD Plant 3D System variables ....................................................................................................... 22

Project and drawing properties .........................................................................................25 Creating a new project ........................................................................................................................... 26 User Interface of the project properties dialog box ............................................................................... 33 Project Structure..................................................................................................................................... 35 How things work together ...................................................................................................................... 37 Adding Project Properties ................................................................................................................... 39 Adding drawing properties ................................................................................................................. 41 File naming scheme ................................................................................................................................ 43 Selection Lists ..................................................................................................................................... 45 Exercise - 1 .............................................................................................................................................. 49

Layer and Color settings.....................................................................................................51 The default Layer and Color schematic .................................................................................................. 52 Schematic settings .................................................................................................................................. 54 Creating a new Schematic ...................................................................................................................... 55 Switching between automation schemes .............................................................................................. 57 Pipe supports and automation schemes ................................................................................................ 59 Exercise - 2 .............................................................................................................................................. 60

Joint settings - End Connections.........................................................................................61 Type of connections................................................................................................................................ 62 Connection Adverbs ............................................................................................................................... 63 Simple Joints vs. Compound Joints ......................................................................................................... 64 Creating a new simple joint .................................................................................................................... 70 Creating a new compound joint ............................................................................................................. 72 Exercise - 3 .............................................................................................................................................. 75

AutoCAD P&ID Object Mapping .........................................................................................77 What does mapping properties lead to .................................................................................................. 78 Mapping properties from P&ID with the 3D model ............................................................................... 79 Mapping the properties .......................................................................................................................... 81 Plant 3D Class Mapping .......................................................................................................................... 83

AutoCAD Plant 3D - Advanced

Page 2

Table of Content

Setting the Tag format....................................................................................................... 85 Where do you create the Tag format......................................................................................................86 Equipment Tag ........................................................................................................................................87 Valve Tag .................................................................................................................................................91 Pipe Line Tag ........................................................................................................................................... 96 Exercise - 4 ..............................................................................................................................................99

Orthographic Annotations ............................................................................................... 101 Annotations set-up ................................................................................................................................102 Equipment Annotation ..........................................................................................................................103 Symbol Properties .............................................................................................................................106 General Style Properties ...................................................................................................................107 Other Properties................................................................................................................................107 Pipe Line and Valve Annotation ............................................................................................................108 Exercise - 5 ............................................................................................................................................ 111

Setting up ISO styles ........................................................................................................ 113 Create a new Isometric style .................................................................................................................114 The structure of an Iso Style .................................................................................................................115 ISO Style Setup ......................................................................................................................................118 Iso Annotations .....................................................................................................................................123 Bill of Material ...................................................................................................................................124 Cut Pieces ..........................................................................................................................................125 Welds.................................................................................................................................................126 Spools ................................................................................................................................................127 Valve Annotations .............................................................................................................................128 End connection annotations .............................................................................................................129 Connection Text ................................................................................................................................131 Dimensions ............................................................................................................................................134 Sloped and Offset Piping .......................................................................................................................146 Sloped Piping .....................................................................................................................................147 Offset Piping ......................................................................................................................................148 Exercise - 6 ............................................................................................................................................ 151 Title block and display ...........................................................................................................................153 Setup Title Block ....................................................................................................................................158 Table Placement and Setup...............................................................................................................160 Title Block Attributes .........................................................................................................................176 Line Designation Table (LDT) .............................................................................................................181 Iso Themes ........................................................................................................................................184 Exercise - 7 ............................................................................................................................................ 191 Fine tuning your settings (Isoconfig.xml) ..............................................................................................192 Elevations at every change of direction and at branches .................................................................195 Pipe Size annotation (modify) ...........................................................................................................197 Pipe Size annotation (Off) .................................................................................................................199 Dimensioned Flow Arrow ..................................................................................................................200 Line number annotation (Style) ........................................................................................................202 Line number annotation (On/Off) .....................................................................................................205 Pipe Support Tag ...............................................................................................................................206 Dimensioning from/to Elbow ends ...................................................................................................208 Fine tuning your settings (IsoSymbolStyles.dwg)..................................................................................210 Creating your own Iso symbols .............................................................................................................218


Page 3

Table of Content

Catalog and Spec editor ...................................................................................................225 Default file locations ............................................................................................................................. 226 Changing the default location .......................................................................................................... 227 The Catalog and Spec Editor - creating a pipe spec.............................................................................. 229 Filtering for components .................................................................................................................. 232 Adding components to a spec .............................................................................................................. 234 Setting the part priority .................................................................................................................... 236 Setting up the branch table .................................................................................................................. 238 The Catalog Editor ................................................................................................................................ 243 Adding Custom Properties ................................................................................................................ 245 Exporting and importing Catalog data .............................................................................................. 247 Port Properties.................................................................................................................................. 249 The catalog editor Size tab ................................................................................................................... 251 Size specific properties ..................................................................................................................... 254 Creating new components.................................................................................................................... 255 Catalog Editor - Duplicate Component ............................................................................................. 256 Catalog Editor - Create new parametric component ....................................................................... 258 Catalog Editor - AutoCAD based components .................................................................................. 263 PlantPartConvert .............................................................................................................................. 265 Catalog Editor - AutoCAD based components (continued) .............................................................. 267 Creating a new catalog ..................................................................................................................... 273 Nozzle Catalog ...................................................................................................................................... 275 Bolt sets and bolt length ....................................................................................................................... 277

The report creator ........................................................................................................... 281 Report Creator - Template location...................................................................................................... 282 Report Template settings ..................................................................................................................... 284 Output Type ...................................................................................................................................... 285 Target ................................................................................................................................................ 286 Edit Query ......................................................................................................................................... 288 Edit Report Layout ............................................................................................................................ 291 Creating a new report from scratch ................................................................................................. 296 Fine tuning the report .......................................................................................................................... 303 Create new custom property............................................................................................................ 304 Grouping of a property ..................................................................................................................... 307 Adding Multiple groupings ............................................................................................................... 309 The sum of parts ............................................................................................................................... 311 Report filter options ......................................................................................................................... 315 Report Parameters ........................................................................................................................... 319 Exercise - 8 ............................................................................................................................................ 324

Tips & Tricks (Advanced) ..................................................................................................325 Pre-determined gasket type ................................................................................................................. 326 Adding simple joints ......................................................................................................................... 327 Adding compound joints................................................................................................................... 329 DefaultConnectorsConfig.xml........................................................................................................... 331 Link with the catalog and spec editor............................................................................................... 333 Changing the catalog connected to a pipe spec ................................................................................... 337 Editing the pipe spec without the catalog and spec editor .............................................................. 337

Page 4


Chapter

2

Generalintroductiontothebook WelcometothisadvancedbookforAutoCADPlant3D.Tomakegooduseofthisbookwe wouldliketotellyouhowthisbookisbestused.Thisbook,calledAutoCADPlant3DͲ Advancedisalearningbookandcanbeusedasareferenceguidewhenyouaresearchingfor answers.ImportantisthatyouhavesufficientexperienceinworkingwithAutoCADPlant3D,as thesubjectstakencareoffinthisbookareforexperienceduserswhowanttobeabletosetͲup andconfiguretheirownprojectsinAutoCADPlant3D. Thebestwaytousethisbookisinfrontofyourcomputer,whereofcoursetheAutoCADPlant 3Dsoftwareisinstalled.ThenatureofthisbookishandsͲon,whichmeansthatyouwillnotonly readaboutpossibilities,butyouwillexperiencethemyourselfbyperformingpreͲdefined exercisesthatwilltestyourskillsandchallengeyourknowledge. Togetthemostoutofthisbookitisessentialthatyouuseitinthefollowingway... x x x

Readtheexplanationoftypicalcommandsandtrytounderstandtheprocedures necessarytoperformtheexercisesattheendofeachchapterorparagraph. Followtheexercises,theyareallbasedontheknowledgeyougainedinthechapter before. Whenyouunderstandtheideaofsettinguppartsoftheconfiguration,trytothinkof wayshowyoucouldusethisinthesetͲupofyourownfutureprojects.

AutoCADPlant3DͲAdvanced

Page6

Generalintroductiontothebook

Additionalcommentsandnotes.... Duringthecourse,inseverallocationsinthebook,wehaveaddedadditionalcommentsand notes,basedonourownexperiencewhencreatingprojectconfigurations.Thesenotesand commentswillhelpyoutobetterunderstandtheusageofsomecommands,butalsowill preventyoufrommakingthesamemistakeswemadewhenwestartedconfiguringAutoCAD Plant3D.Tomakesureyouwillrecognizeautomaticallyourtips,tricksandwarningswewill displaytheminthewayasshownbelow...

&

Thetextthatgoeswiththetipwillbeplacedinthisarea

TIP!

)

Thetextthatgoeswiththenotewillbeplacedinthisarea

Note!

,

Thetextthatgoeswiththewarningwillbeplacedinthisarea

Warning!


Page7


Glossary TohelpyoutounderstandspecificterminologyinthisbookandintheAutoCADPlant3D software,weaddedthisglossarywhichshowsalargenumberofcommandsandfunctionsthat willbeusedorwhichyouwillencounterwhileconfiguring. Acquiremode Themodeinwhichapropertyacquiresitsvaluefromanothersource(propertiesforaproject, drawing,orclass). SeealsoOverridemodeandInitializationonly. Acquisition Apropertytypethatacquiresitsvaluefromanothersourcesuchasprojectproperties,drawing properties,orclassproperties. Annotation AnAutoCADobjectcomprisedoftextand(optional)shapes.InAutoCADPlant3D,annotations areusedtodisplaydatavaluesofP&IDcomponents(includingequipment,valves,lines,andso on).Thesevaluesaredisplayedastext. Assembly Agroupofconnectedcomponentsthatarecommonlyplacedinadrawingatthesametime. Forexample,alevelgaugeassemblymightcontainaninstrumentandfivevalves.Youcanplace anassemblyfromatoolpaletteinsteadofselectingeachcomponentindividually. Assumednozzle AtypeofnozzlethatisautomaticallyaddedasarecordintheDataManagerwhenapipelineis connectedtoapieceofequipment.Unlikeothernozzletypes,anassumednozzleisnotvisible inthedrawing. AutodeskConnectionPoint(ACP) Anobjectthatcontainsportinformationwhichallowspipingconnectionstoobjectscreatedin otherprograms(forexample:AutoCADMEP). Automaticannotation Atypeofannotationthatgetsautomaticallyinsertedwhenacomponentiscreated.Seealso AnnotationandLinkedAnnotation.

Page8



Billofmaterials(BOM) Listofcomponentsneededtofabricateapipeline. Childtable SeeObjecttable. Classfamily Aclassthatisusedtocategorizeotherclassesandsetastartingpointforclassproperties,tags, andannotationsforthoseclasses.Forexample,PumpsandEquipmentareclassfamilies; CentrifugalPumpandBallValveareclasses. Class Thetypeofanobject.EspeciallyaPlant3DorP&IDclasssuchasPipe,Valve,Nozzle,or Equipment. Classproperty Apropertyofaclass;itreflectsadatavalue.Forexample,theHandValveclasstypemayhave attributesofsize,spec,andmanufacturer.ThePumpsclasstypemayhaveflow,TDH,and manufacturer. Component AnativeAutoCADPlant3Dobjecttype.AutoCADPlant3DcomponentsincludeEquipment, Nozzles,Lines,Instruments,andInlineComponents. Componentclass SeeClass. Connectionsymbol ThegraphicalelementinadrawingthatindicatesanoffͲpageoronͲpagelineconnection.You canchoosefromseveralsymbols. Convert TochangeanAutoCADobjecttoanAutoCADPlant3Dcomponentorline;theconverteditemis includedindatareports. Convertedsupport ApipesupportthatwascreatedbyconvertingoneormoreAutoCADobjects.


Page9


DataManager AnenhancedsecondarywindowinAutoCADPlant3D;itdisplaysdatainatable. DuplicateTags TagsareuniqueidentifiersforcomponentsinaP&IDdrawingand/or3Dpipingmodel. Becausetagshavetobeuniqueinasingledrawing,aduplicatetagisnotallowed.Duplicate tagscanonlybeusedovermultipledrawingswherethetagswillbelinkedwithoneanother throughtheDataManager,makingeachtaguniqueagain. DWF(P&ID) ADesignWebFormatfile;itisacompressedfileformatcreatedfromDWGfilesinaproject. DWFfilesareeasytopublishandviewontheWeb. EquipmentInfoTag Anannotationstyle.Amultilinesetofattributesthatdisplaysselecteddatavaluesforaplaced pieceofequipment.OneEquipmentInfoTagforeachequipmentcomponentistypicallyplaced atthetopofadrawingorinagridacrossthebottomofthedrawing. Familytable Atablethatcontainsinformationaboutdifferentclasseswithinaclassfamily.Forexample,the Equipmentfamilytablecontainsinformationaboutpumps,tanks,blowersandotherclasses foundundertheEquipmentclassfamily. Flag Asymbol,likeanarrow,thatindicatesthedirectionoftheflow.Theflagsymbolcontainsthe linenumberannotation.ItisontheNonͲengineeringtaboftheP&IDDINtoolpalette. Flipgrip Agripthatflipsanobjectinthedirectionshowninthegriparrow. Flowarrow Thedirectioninwhichaschematiclineflows.Youcancontrolthedirectionoftheflowarrow usingdynamicgrips. Freestandingannotation Textthatisassociatedwithacomponent;itdoesnotmovewhenthecomponentmoves. However,thedataassociatedwiththeannotationupdateswiththecomponent.Justthetext getsdisconnected.Annotationsareeitherfreestandingorlinked.SeealsoLinkedAnnotation.

Page10



Gapcrossing Avisualindicationonadrawingthatalinebreaksoneithersideofacrossing. Initializationonly ApropertysettingthatlimitspropertyacquisitiontoaoneͲtimeevent,whenacomponentis firstinitialized.Ifthepropertyissettoinitializationonly,itacquiresitsvaluefromits designatedsourceandchangesimmediatelytooverridemode. SeealsoAcquisitionandOverridemode. Inlinecomponent Acomponentwithanalignmentgripthatcanbedroppedontoaline. Instrument Adeviceorcombinationofdevicesuseddirectlyorindirectlytomeasure,display,orcontrola variable. Isometric A2Ddrawingthatrepresents3Dobjects.Apipingisometricisapictorialrepresentationofa singlerunofpipeandcancontaincomponentanddimensiondetail. SeealsoSpooldrawing. KKS(KraftwerkͲKennzeichensystem) ApowerplantclassificationsystemmanagedanddevelopedbyVGPWorkingPanel.KKSis usuallyusedwiththeDIN2481standard. Linedesignationtable(LDT) Listofpipelinesandtheirproperties. Linkedannotation Graphic,text,ortextwithagraphicthatlabelsacomponent.Thetextvaluesreflectthedata attributevaluesofacomponent.ExamplesoflinkedannotationsarealineID,avalvesize, instrumentfunctionsymbol,orEquipmentInfoTag.Linkedannotationmoveswhenthe componentmoves. Loopcrossing Avisualindicationonadrawingthatalineloopsoveranotherline.


Page11


Objecttable Atablethatcontainsspecificinformationaboutaclassorapropertyofaclass.Forexample, PumpsisanobjecttableoftheEquipmentfamilytable. OffͲpageconnector ThegraphicalrepresentationonaP&IDdrawingofthecontinuanceofalinefromoneproject drawingtoanother. OrthoCube AsemiͲtransparentgreen3Dsolidboxthatyouusetodefinetheboundariesofanorthographic view. Orthogonalconnection ThedefaultAutoCADPlant3Dschematiclinebehaviorofconnectingat90Ͳdegreeincrements. Overridemode Amodeinwhichanacquiredpropertycanbemodified.Apropertythatissetuptoacquireits valuefromanothersourceisswitchedfromacquiringmodetooverridemodeintheProperties paletteorintheDataManager. SeealsoAcquiremode. Part Apipingcomponent.Especiallyasitisrepresentedinapipingspecorcatalog. Pins Symbolsthatidentifyachangeinapipelineproperty.IntheKKStaggingstandard,pinsidentify achangeinproperties(forexample,UnitNumberorSystemCode).Apiniseitheropen(noͲfill) orclosed(blackfill).Openpinsmarktheboundariesofagroupwithacommonproperty. ClosedpinsidentifyabreakinpipingsubͲsystemsorbranchesinapipeline.Whenusingeither openorclosedpins,draftersmustmanuallychangethepropertiesofthelinesbeyondthe openͲpinboundary.PinsarelocatedontheNonͲengineeringtaboftheDINtoolpalette. Pipe Atubeorhollowcylinderfortheconveyanceoffluid. Pipesupport Amanufacturedcomponentthatconnectsapipetoastructure.

Page12



Pipingcomponentfile(PCF) Afilecreatedfromthe3Dmodelthatcontainspipelinedetailcommonlyusedtoproducean Isometricdrawingandbillofmaterial. Schematicline AlineinAutoCADPlant3Dthatrepresentspipelinesandsignallines. SpoolDrawing AdrawingthatrepresentsafabricatedsubͲassemblyofapipeline. SeealsoIsometric. Tag Apropertythatuniquelyidentifiesacomponent. Trim Asaverb,toaddhardwaretoapieceofequipment.Asanoun,additionalinformation.Apipe trimisadditionalinformation(textorgraphics)tofurtherdefineapipingsegment.Equipment trimisadditionalinformation(textorgraphics)tofurtherdefineapieceofequipment. Validate Tocheckadrawingoraprojectforerrorsandinconsistenciessuchasunconnected components,nonͲterminatinglines,andsoon.


Page13


AutoCADPlant3DCommands TheAutoCADPlant3DcommandarespecificallydesignedforusewithAutoCADPlant3Dand thereforewillnotbeavailableinregularAutoCAD.Thecommandsallowyoutostartcommands overthecommandlineinsteadofusingthepopͲupmenus,ribbonsandorrightclick functionality. BelowaoverviewofalltheAutoCADPlant3Dspecificcommandswhichalsocanbefoundin thehelpdocumentationofAutoCADPlant3Ditself. Acptooltips Enablestooltipsforconnectionports(ACP). Auditproject Allowsprojectmanagersorotheradministratorstoevaluatetheintegrityofaprojectand correctserrors. Autodeskconnectionpoint CreatesanAutodeskConnectionPoint(ACP). Compressobject Compressesanddefragmentsthecacheddrawingdatathataccumulateswhileproject drawingsaremodified. Datamanager Displaysdatathatcanbeviewed,modified,exported,andimported. Datamanagerclose ClosestheDataManager. DWFoutputsettings SpecifiesthetypeofP&IDdatathatyoucanincludeinDWFoutputfiles. DWFoutputsettings3d SpecifiesthetypeofPlant3DdatathatyoucanincludeinDWFoutputfiles. Exporttoautocad ExportscurrentdrawingtoAutoCADfileformatswhilemaintainingvisualfidelity. Newproject Createsanewproject. Page14



Newprojectdwg Createsanewdrawingtobeincludedinaproject. NWnavigator OpensNavisworksinanewwindow. Offpageconnect CreatesanoffͲpageconnectorsymbolthatrepresentslinkedlinesthatcanspanmultiple drawings. Openproject OpensaprojectfileintheProjectManager. Pidannotate Placesanannotationinadrawing. Pidconvert AddsdatatoanAutoCADobjecttoaddittoreports. Pideditblock EditsaP&IDcomponentsothatyoucancreateanewinstanceofthatobject. Pidtag DefinestaggingdataforaP&IDcomponentorline. Plantameimportcatalog ImportsanAutoCADMEPcatalogtouseintheSpecEditor. Plantaudit Auditsandrepairsprojectdataanddrawingsynchronizationerrors. Plantcompass Changescompasssettings. Plantconnectionjoint Connectstwoadjacentcomponentswithanewjoint. Plantconvertlinetopipe ConvertsAutoCADlineobjectstoPiping.


Page15


Plantcustomparts Createscustomandplaceholderparts. Plantcustompartsclose ClosestheCustomPartswindow. Plantdisconnectjoint Disconnectstwojoinedcomponentsbyremovingthefasteners. Plantdynamictoolpalette Loadsthedynamicpipespectoolpalettefromthecurrentspec. Planteditautodeskconnectionpoint ModifiesAutodeskConnectionPoint(ACP)properties. Planteditbend Createsapipebend. Plantendcodes Createsormodifiesendcodes. Plantequipmentattach AttachesanAutoCADobjecttoanequipmentmodel. Plantequipmentconvert Convertsa3DDWGmodeltoanAutoCADPlant3Dequipmentmodel. Plantequipmentcreate Createsanewequipmentmodel. Plantequipmentdetach Detachesallpreviouslyattachedobjectsfromanequipmentmodel. Plantequipmentmodify Modifiesanexistingequipmentmodel. Plantfittingadd Placespipingcomponents. Page16



Plantfittingmove Movespipingcomponentssuchthatvalvescanmovetoadifferentpipesegmentortoanopen areainthedrawing. Planthide Hidestheselectedobjects. Plantisoaddinfo CreatesanIsoinformationitem. Plantisoaddmsg Createsamessageonthedrawing.Setsthemessagetext,enclosure,anddimensioning. Plantisotbtablesetup Configurestables(BOM,Cutpiecelist,weldlist,spoollist)thatdisplayonanisometricdrawing titleblock. Plantinventorequipmentconvert ImportsanInventorAECexportfile(*.adsk)asanAutoCADPlant3Dequipmentmodel. Plantinsertautodeskconnectionpoint CreatesanAutodeskConnectionPoint(ACP)atanopenport. Plantisolate HideseverythingexcepttheselectedPlant3Dobjects. Plantmodifysharedcontentfolder SetsthecatalogfilefolderandmigratesfromearlierversionstoAutoCADPlant3D2012if necessary. Plantorthoadjacent Createsanorthographicviewadjacenttoanexistingview. Plantorthoannotate Annotatescomponentsinorthodrawings. Plantorthocreate Createsaneworthographicview. AutoCADPlant3DͲAdvanced

Page17


Plantorthodelete Deletesanorthographicview. Plantorthoedit Editsanorthographicview. Plantortholocate Locatesthe3Dobjectthatcorrespondswithanorthographicdrawingcomponent. Plantorthoupdate Updatesthecontentofanexistingorthographicview. Plantorthoupdateannotation Updatesalltheannotationsinanorthodrawing. Plantorthovalidateview Checksthemodeltoseeifchangeshavebeenmadesincethedrawingwaslastupdated. Plantpartconvert ConvertsanAutoCADblocktoapipingcomponentbyaddingports. Plantpcfexport Exportsapipingcomponentfile. Plantpcftoiso CreatesanIsofromaPCFfile. Plantpidlinelist Placesa3DequivalentofaP&IDobjectinaPlant3Dmodel. Plantpidsizemapping EditsthesizevaluesfromthedefaultfilethatmapsP&IDandPlant3Dobjectsandproperties. Plantpipeadd Routespipingandinsertscomponent. Plantpipeslope Editstheslopebetweentwoselectedportsonapiperun. Page18



Plantpipesupportadd Addspipesupports. Plantpipesupportattach AttachesAutoCADobjectstoapipesupport. Plantpipesupportconvert ConvertsAutoCADobjectstoapipesupport. Plantpipesupportdetach DetachesallAutoCADobjectsfromapipesupport. Plantpipesupportmodify Modifiespipesupports. Plantweldadd Addsaweldtopipe. Plantproductioniso Createsaproductioniso. Plantquickiso Createsaquickiso. Plantregistercustomscripts Registersaparametricmodel Plantremoveorphanfasteners Removesfastenersthatarenolongerpartofajoint. Plantroutefromautodeskconnectionpoint RoutepipingfromanAutodeskConnectionPointobject. Plantshowall DisplaysallPlant3Dobjectsinadrawing. Plantsizedisplaymode DisplayscomponentsizeonlyinprojectunitsorinbothImperialandmetricunitswhenthe projectandcomponentunitsdiffer.


Page19


Plantspecviewer Displaysthecurrentpipespec. Plantspecupdatecheck Checksforchangesmadetospecfilesthatareinuseinadrawing. Plantsteelmember Createsastructuralmember. Planttag TagsaPlant3Dobject. Projectmanager Assemblesandmanagesfilesbelongingtoaproject. Projectmanagerclose ClosestheProjectManager. Projectsetup OpenstheProjectSetupdialogbox,whereadministratorscanconfigureandmanageproject settings. SDNFexport ExportsstructuralobjectstoSteelDetailingNeutralFormat. Sledit Editsschematiclines. Slgroup Createsnewschematiclinegroupsfromexistingschematiclinesorschematiclinegroups. Slgroupedit Adds,removes,oreditsaselectedschematiclinegroupandassociatesordissociatesasignal linegroupandapipelinegroup. Slgroupselect Selectsalllinesegmentsinagroup. Sline Createsaschematicline. Page20



Synchstyles Synchronizesthedrawingwiththeproject. Validate Validatestheopenprojectforerrorssuchasorphanedannotations,nonͲterminatedlines, unconnectedoffͲpageconnectors,andsoon. Validateconfig Controlsthetypesoferrorsthatareflaggedbythevalidationprogram. Validatesummary Displaysthevalidationsummaryforaproject.


Page21


AutoCADPlant3DSystemvariables AutoCADsystemvariablesdonotspecificallystartcommands,butallowyoutoswitchsettings onandoff.Forexampleasystemvariablecanswitchthewelcomedialogboxonoroff.Below anoverviewofthesystemvariablesthatcanbeusedwithAutoCADPlant3D,thesesystem variableswillnotbeavailableinregularAutoCAD. Isoareavisibilty DisplaysIsoareasasaperimeterorhatchobject Plantconnectionmarker Togglesthedisplayofthedisconnectmarker. Plantcontentfolder Displaysthesharedcontentcatalogfolder. Plantdefaultlayer Setsthepipinglayertousewhenusingautomatedlayerassignmentsandthelayercannotbe determined. Plantlockfadectl Fadeslockedpipinginthe3Dmodel. Plantgripeditmode Controlswhetherinlinefittingsareconstrainedtomovewithinthecurrentpipesegmentorif theymovetootherconnectedpipesegmentsinthenetwork. Plantinsulationdisplay ControlswhetherinsulationisdisplayedonAutoCADPlant3Dpipingobjects. Plantinsulationmode ControlswhetherinsulationisdisplayedonAutoCADPlant3Dpipingobjects. Plantlockpointofsupport LocksthepointͲofͲsupportonpipesupports. Plantoffsetconnect ControlswhetherAutoCADPlant3Dattemptstoconnectpipingwhensnappingtoapipe connectionandusingpipeoffsetwhilerouting. Page22



Plantmaxbendangle Specifieswhetherpipebendscanbeusedupto90or180degrees. Plantpcfunicode CreatesUnicodePCFfiles. Plantpipesilhdisplay Setsthedisplayofthepipesilhouettes. Plantpropmismatchdisplay Togglesthedisplayofthepropertymismatchmarkers. Plantplaceholderdisplay TogglesthedisplayofthePlaceholderPartglyph. Plantroutebend Createspipebendswhileroutingpipe. Plantsavedetail SetsthedetailoftheproxygraphicswhenPlant3DobjectsareviewedinAutoCADor Navisworkswithoutobjectenablers. Plantslopethresholdangle Specifiestheanglebelowwhichpipingistreatedassloped. Plantspecnotify Checksforspecfileupdateswhenthedrawingloads,andonatimeinterval. Plantspecnotifytime Setsthetimeintervalthatspecfilesarecheckedforupdates. Plantwelcomeenabled Displaysthewelcomescreenatstartup. Plantwelcomenewproject DisplaystheNewProjectbuttononthewelcomescreen.


Page23


Plantwelddisplay Togglesthedisplayofconnectionmarkers. Slineortho Setswhetherorthoisturnedonwhenslineisactivatedandwhethercornerpointsareimplied. Sycnstylemode Setshowprojectdrawingssynchronizewiththeprojectdatabase. Vgrips Controlsthedisplayofvertexgrips

Page24


Training-Manual_AutoCAD-Plant-3D_Advanced_English_2013

Recommend Documents