Parts List and Hydraulic Specifications Parts Breakdown 010
040
050
100
090
080
Please note this exploded view is for representation purposes only. This may slightly differ differ from your actual track system. If in doubt, please contact Strickland Tracks Ltd. Exploded View:
070 020 060
220
230
235
030 200 210 190 186 185
110 120 130 280 250 260
240 ‐ Track Group
270
300 – 300 – Master Pin and Collars 290 ‐ Track Repair Link Kit
180 160 170 150 140
005
Parts List and Hydraulic Specifications DL384X-J C225J AS DT00
1. Parts List for Track System Qty per Track 1
Qty per Pair 2
Socket Head Capscrew (Gearbox to Track Frame)-Torque to 615 Nm (454 Ibs/ft)
16
32
MOT0JA-FDMOTOR
Fixed Displacement Motor
1
2
040
FDG RRTD-DRNPLG
Oil Fill/Drain Plug
2
4
050
POL 00280W/90-0
Gear oil SAE 80W/90
3.0L
6.0L
060
N/A
Brake Release Stand-off Pipe
N/A
N/A
070
FMVA04-A04MM
Brake Release Adaptor
1
2
080
FMVA14-DBS04
Brake Release Seal
1
2
090
SPA 300-DLHB21-3
1
2
100
BHM 516150055-0
20
40
110
LRG 000SC40A-A
8
16
120
BHM 016200085-8
32
64
130
WFH 019-2
Drive Sprocket Socket Head Capscrew (Sprocket to Gearbox) – Torque to 336 Nm (248 Ibs/ft) Single Flanged Lower Roller Hex Head Bolt (Roller to Track Frame) -Torque to 314 Nm (232 Ibs/ft) Hardened Washer
32
64
140 150
IDG 502-XHD IDY 171-502-XHD
1 1
2 2
160
BHM 012175050-7
4
8
170
WSH 023-HD-3
Front Idler Group Idler Yoke Hex Head Bolt (Yoke to Idler) –Torque to 127 Nm (93 Ibs/ft) Spring Washer
4
8
180
RSA 171-502-XHD
Spring Recoil
1
2
185
BHM 016200060-7
Hex Head Bolt (Recoil to Yoke) –Torque to 314 Nm (232 Ibs/ft)
4
8
186
WSH 015-2
Spring Washer
4
8
190
TTA 171-175-XHD
1
2
200
BHM 016200065-0
4
8
210
WSH015-2
Grease Tensioner Hex Head Bolt (Tensioner to Track Frame) - Torque to 314 Nm (232 Ibs/ft) Spring Washer
4
8
220
IDM 889-2
Tensioner Grease Fitting
1
2
230
IDM 888-6
Gasket for Grease Fitting
1
2
235
TLG 080-9
Grease Gun Adaptor
N/A
N/A
240
TG-0738-D4D-56L-400
Track Group
1
2
250
TCA 81156-XHD
Track Link Assembly
1
2
260
TBG 014400-58-0
56
112
270
TSB 02250-3
224
448
280
TSN 014-1
Track Shoe (400mm Wide Triple Grouser) Track Shoe Bolt -Torque to 358 Nm (264 Ibs/ft) Track Shoe Nut
224
448
290
TRL 099-3-XHD
Track Repair Link Kit
N/A
N/A
300
MPG 0044-XHD
Master Pin and Collars
1
2
Item No.
Strickland Part No.
Description
010
FDM784-JC225NM
Track Drive Gearbox w/o Hydraulic Motor
020
BHM 520250065-1
030
Note: For more details on Parts Breakdown Please refer to EXPLODED VIEW: 005
copyright
Strickland Tracks Ltd Nov-2004, The Heath Works, Cropthorne, Pershore, Worcs. WR10 3NE. Tel +44 (0)1386 862800 Fax: +44 (0)1386 862801 E-mail:
[email protected] Web: www.stricklandtracks.com
Rev. 091027
Parts List and Hydraulic Specifications DL384X-JC225JASDT00
2. Required Connections Highlighted below are main connections required to operate the track drive. A & B, Main Flow Ports
T, Motor Case Drain Port
F, Gearbox Brake Release Port
3. Hydraulic Schematic Below is the general hydraulic circuit diagram for the track drive gearbox and fixed displacement motor combination with no motion control and brake release valve fitted. F
B
A
Directional Control Valve from
4. Direction of Rotation When connecting to the track drives, it is important to check that the direction of rotation corresponds to forwards movement of the machine, when the drives are positioned at the rear of the machine.
T
The diagram above shows the direction of rotation of the track drive in relation to the input flow to motor.
Machine
copyright
Strickland Tracks Ltd Nov-2004, The Heath Works, Cropthorne, Pershore, Worcs. WR10 3NE. Tel +44 (0)1386 862800 Fax: +44 (0)1386 862801 E-mail:
[email protected] Web: www.stricklandtracks.com
Rev. 091027
Parts List and Hydraulic Specifications DL384X-JC 225J A S DT00
5. Hydraulic Port Description and Sizes A & B, Main Flow Ports
T, Motor Case Drain Port
F, Gearbox Brake Release Port
Ports Size on Gearbox and Motor A & B, Motor Main Flow Ports
3/4” S AE
T, Motor Case Drain Port
M18 x 1.5
F, Gearbox Brake Release Port
1/4" BSPP
6. Hydraulic Specifications Operating Pressures / Flows Maximum Continuous Pressure Maximum Permissible Case Drain Pressure at Port T Brake Release Pressure Variable Speed Control Pressure at Port X
330 bar 2 bar 24 bar (Min) 50 bar (Max) N/A (Min) N/A (Max) 295 l/min
Maximum Oil Inlet Flow through Ports A & B Gearbox Oil Type, Volume and Operating Temperature Oil Type SAE80W/90 Oil Volume 3.0L per Gearbox Minimum Operating temperature of Oil -25°c Maximum Operating temperature of Oil 90°c
7. Hydraulic Filtration and Cleanliness Before connecting track drives to hydraulic circuit, ensure all pipes are removed and flushed through with the hydraulic system prior to connection. To ensure proper function of hydraulic motor, the filtration of pressure fluid must provide a cleanliness level of at least: 20/18/18 according to ISO 4406.
copyright
Strickland Tracks Ltd Nov-2004, The Heath Works, Cropthorne, Pershore, Worcs. WR10 3NE. Tel +44 (0)1386 862800 Fax: +44 (0)1386 862801 E-mail:
[email protected] Web: www.stricklandtracks.com
Rev. 091027