First correct HS/EUL user failures. These failures will push traffic down to R99, which consumes more DL codes 2nd carrier upgrade DCH load sharing (send through the requests for the LKF and I’ll help with the load sharing parameters) Activate load based handover to GSM (if you don’t know how, please ask your 3G specialist in the region or alternatively send a mail through to me) and increase dlCodeAdm to 95%
Correct discrepancies (match RNC maxtransmissionpower with Node B maxdlpowercapability). RBS 6000 sites might need correct LKF (send request through) Correct HS/EUL user failures. These failures will push traffic down to R99, which consumes more DL Power 2nd carrier upgrade DCH load sharing (send through the requests for the LKF and I’ll help with the load sharing parameters) Activate load based handover to GSM (if you don’t know how, please ask your 3G specialist in the region or alternatively send a mail through to me) and increase dlpwrAdm to 95%
DL CE (Facts Counter -> ‘pmNoFailRabEstAtptLackdlHw’): • • •
Check txdevice config (if you don’t know how, please ask your 3G specialist in the region or alternatively send a mail through to me). I have attached the macro to assist you with this as well. Request upgrade (LKF and/or Hardware) Adjust dlfractbasebandpool2 parameter for Node Bs with 2 baseband pools (3 cell carriers).
UL CE (Facts Counter -> ‘pmNoFailRabEstAtptLackUlHw’): • • •
Check if “Improved CE ladder” LKF is loaded on the site. Use “licensce key” command on AMOS. (if you don’t know how, please ask your 3G specialist in the region or alternatively send a mail through to me) Request upgrade (LKF and/or Hardware) Adjust ulfractbasebandpool2 parameter for Node Bs with 2 baseband pools (3 cell carriers).
