ALU - Nokia 2G Features Mapping Orange Cote D’ivoire July 2016
1 29/07/2016 Confidential
© Nokia 2014
Scope of this presentation In this presentation we will show the mapping of major 2G features from the former Alcatel-Lucent solution to Nokia • Alcatel to Nokia compliant features • Other Alcatel features mapped to Nokia basic functionality
2 29/07/2016 Confidential
© Nokia 2014
Alcatel to Nokia compliant features
3 29/07/2016 © Nokia 2014 - File Name - Version - Creator - DocID Confidential
ALU - Nokia 2G Mapped Features Release Feature ID
ALU Feature Name
B7.2
15 48 10
UMTS to GSM Handover
B9
15 48 30
Load based 3G handover filtering
B7.2
15 48 20
GSM to UMTS cell re-selection
B10
15 48 54 15 48 58
Usage of CPICH/RSCP for GSM to UMTS cell re-selection Fast 3G re-selection at 2G call release
B11
15 49 02
2G to LTE FDD cell re-selection
B2
15 40 90 15 26 30
Handover types Power control
B10
15 24 80
B4
Activation
Compliance (Y/N) Status
BSS10101:Inter-System Handover
Y
Active
BSS10101: GSM-WCDMA Interworking
Y
Active
Yes
BSS10101:Inter-System Handover
Y
Active
Yes
BSS20477: CPICH RSCP Based Criterion for 2G to 3G Cell Reselection BSS30365: Service Quality Based WCDMA Access
Y
Active
BSS21353: LTE System Information
Y
Yes
BSS02703: Handover and Power Control Algorithms
Y
Active
Multiple CCCH
Yes
BSS21538: Extended CCCH
Y
Active
15 34 60
Support of enhanced full rate (EFR)
Yes
BSS6071: Enhanced Full Rate Codec
Y
Active
B7.2
15 33 70
Adaptative Multirate Codec (AMR) in HR mode
Yes
BSS30060: AMR Capacity (HR)
Y
Active
B7.2
15 34 70
Adaptative Multirate Codec (AMR) in FR mode
Yes
BSS20249: AMR FR License Control
Y
Active
B9
15 23 82
Support of Extended GSM Band (E-GSM)
Yes
BSS21238 Merged P-&E GSM900
Y
Active
4 29/07/2016 Confidential
© Nokia 2014
Yes
Nokia Feature Id and Name
GSM-WCDMA Interworking ( Idle and connected mode )
ALU Load based 3G handover filtering
BSS10101: GSM-WCDMA Interworking
GSM to UMTS Handover
BSS10101: GSM-WCDMA Interworking
GSM to UMTS cell reselection
BSS10101: GSM-WCDMA Interworking
Fast 3G re-selection at 2G call release
BSS30365: Service Quality Based WCDMA Access
Usage of CPICH/RSCP for GSM to UMTS cell reselection 5 29/07/2016 Confidential
Nokia
© Nokia 2014
BSS10101: GSM-WCDMA Interworking & BSS20477: CPICH RSCP Based Criterion for 2G to 3G Cell Reselection
BSS10101: GSM-WCDMA Interworking Brief Description: GSM-WCDMA Inter-System Handover enables UE-controlled inter-system mobility for the WCDMA-capable dual mode GSM/WCDMA UE from: GSM to WCDMA RAN in idle state GSM to WCMDA RAN in connected mode Benefit:
Capacity extension for GSM with load sharing between 3G and GSM
6 29/07/2016 Confidential
© Nokia 2014
Feature Activation: PRFILE parameter ON/OFF :
ISHO_SUPPORT_IN_BSC is activated in the BSC
Related Parameters: Thresholds for the UE to measure WCDMA RAN cells while camping on a GSM cell
Idle qSearchI (Threshold To Search UTRAN Cells ) fddQMin (Minimum FDD Threshold ) fddQOffset ( FDD Cell Reselect Offset ) The BSS20477:CPICH RSCP Based Criterion for 2G to 3G Cell Re-selection Introduces two additional parameters for cell re-selection: fddRscpMin (Minimum RSCP Threshold ) fddQMinOffset (Minimum Fdd Threshold Offset )
Connected qSearchC (Threshold For Multi-RAT MS ) utranHoThScTpdc (Min Traffic Load For Speech Call ) fddRepThr2 (Fdd Reporting Threshold 2 ) minEcnoThreshold (Minimum CPICH Ec/Io Level ) 7 29/07/2016 Confidential
© Nokia 2014
Idle Mode Activation Parameter Parameter name
Abbreviated Name MO Class
Threshold To Search UTRAN Cells
Minimum FDD Threshold
qSearchI
fddQMin
Description
Range and step
BTS
With this parameter you define the threshold for dual mode mobiles in idle state to search for and to measure UTRAN neighbour cells introduced in 3G Cell Reselection list when a running average of the received downlink signal level (RLA_C) of the serving cell is below (0-7) or above (8-15) the threshold. This parameter is broadcast only on BCCH.
gui ==> internal -98 dBm ==> 0 , -94 dBm ==> 1 , -90 dBm ==> 2 , -86 dBm ==> 3 -82 dBm ==> 4 , -78 dBm (RLA_C below) ==> 5 , -74 dBm (RLA_C below) ==> 6 Infinity (always) ==> 7 , -78 (RLA_C above) ==> 8 ,-74 (RLA_C above) ==> 9 , -70 ==> 10 -66 ==> 11 ,-62 ==> 12 , -58 ==> 13 ,-54 ==> 14 ,Infinity (never) ==> 15
BTS
This parameter defines a minimum Ec/Io threshold which must be exceeded before a non-GPRS capable dual mode mobile is allowed to make a reselection from the serving GSM cell to an adjacent WCDMA RAN cell that is using frequency division duplex (FDD) type access technology/ mode.
Value range: -20 ..-6 dB with 2 dB steps
range: -28..28 dB, step 4 dB
FDD Cell Reselect Offset
fddQOffset
BTS
With this parameter you define a UTRAN cell reselection offset for non-GPRS capable dual mode mobiles which are in the idle state. The mobiles add the offset to the running average (RLA_C) of the received signal level of the serving GSM cell and non-serving GSM cells. After that the mobiles compare the measured RSCP values of UTRAN cells with signal levels of the GSM cells.
Minimum RSCP Threshold
fddRscpMin
BTS
This parameter defines the minimum RSCP threshold for cell reselection from the serving GSM cell to an adjacent UTRAN FDD cell for dual-mode mobiles (R5 onwards).
Range and step: -114..-84 dBm, step 2 dB
BTS
This parameter applies a negative offset to the minimum Ec/No threshold for cell reselection from the serving GSM cell to an adjacent UTRAN FDD cell for dual-mode mobiles
0...14
Minimum Fdd Threshold Offset
8 29/07/2016 Confidential
fddQMinOffset
© Nokia 2014
Connected Mode activation parameters Parameter name
Abbreviated MO Class Name
Threshold For Multi-RAT MS
Min Traffic Load For Speech Call
qSearchC
utranHoThScTpd c
Fdd Reporting Threshold 2
fddRepThr2
Minimum CPICH Ec/Io Level
minEcnoThreshol d
9 29/07/2016 Confidential
© Nokia 2014
Description
Range and step
HOC
With this parameter you indicate a threshold for multi- RAT (radio access technology) MSS in dedicated state to measure WCDMA RAN neighbour cells 0...15 introduced in 3G Cell Reselection list when the measured downlink signal level (RLA_C) of the serving cell is below (0-7) or above (8-15) the threshold.
HOC
With this parameter you define the minimum traffic load that must be exceeded on the serving GSM cell before the handover algorithm is allowed to 0...100% initiate a handover for a speech call from the serving GSM cell to a WCDMA RAN cell.
HOC
The parameter defines the reporting threshold for the adjacent UTRAN FDD cell in the serving GSM cell. The non-reported measurement quantity CPICH RSCP has to be equal or greater than the threshold value before the UTRAN FDD cell is reported.
ADJW
With this parameter you define the minimum CPICH Ec/Io level of an adjacent WCDMA RAN cell for an inter-system handover attempt. The threshold level -24...0.5 , 0.5dB step must be exceeded before the BSC is allowed to trigger a handover attempt towards the adjacent WCDMA RAN cell.
Range and step: 115..-53 dBm, step 1 dB
Service Quality based WCDMA Access “Service Quality based WCDMA Access” consists of the following three features:
ALU Usage of CPICH/RSCP for GSM to UMTS cell reselection
•
BSS20858, WCDMA Neighbor Cell Reporting Enhancement
•
BSS20477, GSM to WCDMA Advanced Cell Reselection (CPICH RSCP Based Criterion)
•
BSS20132, Mobile Specific Channel Release Message
10 29/07/2016 Confidential
© Nokia 2014
Nokia Service Quality Based WCDMA Access
Service Quality based WCDMA Access BSS20858, WCDMA Neighbor Cell Reporting Enhancement
Description: New WCDMA cell reporting threshold parameter FDD_REPORTING_THRESHOLD_2 is introduced. This parameter sets
Benefits for the Operator: Improved end-user overall perceived quality
a threshold value for non-reported measurement quantity that is CPICH RSCP in the BSS. CPICH RSCP in WCDMA cell has to be equal or greater than FDD_REPORTING_THRESHOLD_2 before dual-mode mobile adds the WCDMA cell to the measurement report. This prevents IS-HOs and IS-NCCRs from GSM to WCDMA FDD cell when uplink quality in the WCDMA cell would be too weak.
BSS20477, GSM to WCDMA Advanced Cell Reselection (CPICH RSCP Based Criterion)
Description: criteria for WCDMA cell reselection, “CPICH Ec/No”, is a good measure of the WCDMA Downlink quality, however, is
not so good for the Uplink. Consequently, the Common Pilot Channel (CPICH) Received Signal Code Power (RSCP) criteria was added for GSM to WCDMA cell reselections , Cell reselections to WCDMA are now completed only if both CPICH Ec/No and RSCP exceed the minimum requirements, now taking care of both the Uplink and the Downlink. Benefits for the Operator: Improved success rate of cell re-selections towards WCDMA
BSS20132, Mobile Specific Channel Release Message
Description: Direct camping information is indicated to all dual-mode mobiles, when WCDMA coverage is available and MS reports
Benefits for the Operator: Mobile Specific Channel Release Message will give significantly faster access to 3G services for end-
at least one WCDMA neighbor cell. That WCDMA neighbor cell is then used in the Channel Release message as the target cell for idle mode camping. If more WCDMA neighbor cells are reported, the best one should be used as the target cell for idle mode camping.
users
11 29/07/2016 Confidential
© Nokia 2014
Service Quality based WCDMA Access Activation
License Name
2G-3G Service Quality WCDMA Access (this license is required for the 3 following features)
Feature Name
CPICH RSCP Based Criterion for 2G to 3G Cell Reselection
ZW7M:FEA=590:OFF;
fdd rscp min (no recommended value)
Feature Name
WCDMA Neighbour Cell Reporting Enhancement
ZW7M:FEA=593:OFF;
"fdd reporting threshold 2" to 26
Feature Name
Mobile Specific Channel Release
ZW7M:FEA=594:OFF;
“QsearchC” to 7 “multiratRep” to 2 “utranHoThScTpdc” to 100
12 29/07/2016 Confidential
© Nokia 2014
Related Parameters
Feature name : BSS21353: “LTE system information” Description : This feature enables cell reselection from GSM cells to LTE cells Concept of priority based algorithm : The MS reselects to the inter-RAT cell with highest priority among the ones that satisfy the threshold criteria. The threshold criteria that must be satisfied is (RSRP - lteAdjCellMinRxLevel) > lteAdjCellReselectUpperThr Benefit : The traffic moving to the LTE network releases the GSM resources and leads to improvements in the throughput End users of packet switched services entering an area of LTE cells can gain advantage of the benefits of LTE technology such as high data rates. 13 29/07/2016 Confidential
© Nokia 2014
ALU 2G to LTE cell reselection
Nokia BSS21353: LTE System Information
Feature Activation : Check the LTE system information feature state. Set the feature state to “CONF”. ZW7I:FEA,FULL:FEA=1965; Create the LTE adjacent cell using the command Following is an example command: ZEAN:SEG=6:INDEX=0:MCC=210,MNC=214,TAC=7:FREQ=16383; Set the feature state to “ON” ZW7M:FEA=1965:ON; Parameter name
Description
Range
Default
MO
With this parameter, you can define an absolute priority of the adjacent LTE cell. 0 is the lowest and 7 is the highest priority.
0-7
0
ADJL
LTE adjacent cell reselection upper threshold
With this parameter, you can define a minimum value for cell reselection threshold for adjacent LTE cell having a higher priority than the serving cell.
0..62 dB, step 2 dB
32 dB
ADJL
LTE adjacent cell reselection lower threshold
With this parameter, you can define a minimum value for cell reselection threshold for adjacent LTE cell having a lower priority than the serving cell.
0..62 dB, step 2 dB
32 dB
ADJL
LTE adjacent cell minimum RX level
With this parameter, you can define the minimum RX level for LTE access. The value -140...-78 of this parameter must be exceeded before the dB, MS can make a reselection towards the adjacent LTE cell. step 2 dB
-140 dB
ADJL
LTE adjacent cell priority
14 29/07/2016 Confidential
© Nokia 2014
Feature name : BSS21538 Extended CCCH
ALU
Description :
Multiple CCCH
Nokia BSS21538: Extended CCCH
• Extended CCCH can be configured in time slots two, four, or six in the BCCH •
TRX. These are configured in the given order: Time slot 2 must be
• configured before time slot 4, and time slot 4 before time slot 6 Benefit : Increases the CCCH channel capacity in the cell. It may be used for alleviating CCCH paging and access grant capacity problems if these appear in the network
15 29/07/2016 Confidential
© Nokia 2014
BSS21538 Extended CCCH Activation License Activation: Needed Extended CCCH feature License to be installed using the command W7I ZW7I:LIC,FULL:LIC=:; Turn the feature state of Extended CCCH to ON if needed with the command W7M ZW7M:FEA=1826:ON;
Related Parameters: Configure the BCCH TRX by modifying Extended CCCH channel type Modify the Extended CCCH channel type (‘CCCHE’ in MML) to radio time slot 2, 4, and/or 6 in the BCCH TRX with MML command ERM. Time slot 2 must be configured as CCCHE before time slot 4 and time slot 4 must be configured as CCCHE before time slot 6. ZERM:BTS=,TRX=:CH2=CCCHE:CH4=CCCHE:CH6=CCCHE; 16 29/07/2016 Confidential
© Nokia 2014
Feature name: BSS02703: Handover and Power Control Algorithms
ALU HO and Power control
17 29/07/2016 Confidential
© Nokia 2014
Nokia BSS02703: Handover and Power Control Algorithms
Feature name: BSS6071: Enhanced Full Rate Codec Description:
ALU Support of enhanced full rate (EFR)
Nokia BSS6071: Enhanced Full Rate Codec
Enhanced Full Rate (EFR) codec was the first codec to provide wireline speech quality. The next step, Adaptive Multi Rate (AMR) codec, optimizes speech quality in various radio channel conditions by adapting its bit rate allocation between speech and channel coding. • Full rate TCH/FS: Speech (13 kbit/s net, 22.8 kbit/s gross) TCH/EFR: Speech (12.2 kbit/s net, 22.8 kbit/s gross) TCH/HS: speech (6.5 kbit/s net, 11.4 kbit/s gross) Feature Activation : Needed the EFR-specific control parameter EFR_SUPPORT_IN_BSC on (WOC). ZWOC:10,33,FF;
18 29/07/2016 Confidential
© Nokia 2014
Feature name: AMR FR License Control & AMR Capacity (HR) Description: The AMR codec brings further quality enhancements, especially in terms of high error robustness in the full rate channel. It also provides the first codec with quality comparable to wireline for the half rate channel in good channel conditions. All previous GSM codecs operate with fixed partitioning between speech and channel coding (error protection) bit rates. These bit rates have been chosen as compromises between performance in error-free and high-error channels. Benefit : Quality enhancements
19 29/07/2016 Confidential
© Nokia 2014
ALU Adaptative Multirate Codec (AMR) in HR/FR mode
Nokia AMR FR License Control & AMR Capacity (HR)
AMR FR License Control & AMR Capacity (HR) Activation License Activation: needed Licenses covering AMR FR and/or AMR HR have been installed (W7I). ZW7I:LIC,FULL:LIC=; Turn the feature state 'ON' if needed (W7M). AMR FR: ZW7M:FEA=72:ON; AMR HR: ZW7M:FEA=1:ON;
20 29/07/2016 Confidential
© Nokia 2014
Feature name: BSS21238 Merged P-&E GSM900
ALU Support of Extended GSM Band (E-GSM)
Description:
Nokia BSS21238 Merged P&E GSM900
•
Merged PGSM900 and EGSM900 feature, considers 900 MHz as one band by combining the two frequency bands into one.
•
The BSS21026: GPRS/EDGE Support for PGSM-EGSM BTS should be activated to enhances the support for GPRS/EDGE BCCH frequency band of the BTS.
•
Segment Level Parameter: mergedPgsmAndEgsmEnabled
•
BSC Prfile Parameter: 002:0664 COMMH_EGSM900 Benefit :
•
Full use of RF hopping in the segment’s BTSs where there are both PGSM and EGSM frequencies in use
•
Flexibility in frequency planning.
•
capacity extension License Activation:
•
Needed license to be installed in the BSC
•
ZW7I:LIC,FULL:LIC=;;
•
ZW7M:FEA=1530:ON;
21 29/07/2016 Confidential
© Nokia 2014
• Other Alcatel features mapped to Nokia basic functionality
22 29/07/2016 © Nokia 2014 - File Name - Version - Creator - DocID Confidential
Basic Features Basic features refer to those that offer functionality that do not require manual activation. Essentially, they are available by default for use on the network. The features in the follow table are basic features in Nokia deployment. fALU features Feature ID 152710 153440 300432 301050 302010 154100 153350 154110 154120 154260 154270 154280 154290 155030 155260 154130
Feature Name Base band Frequency Hopping Support of call re-establishment by the MS Mobile Controlled Cell re-selection (NC0) GPRS service on several TRX per cell Paging with DRX Intra BTS Handover Support of dual rate (HR/FR) BSC internal hand-over HO inter BSS/intra MSC Level cause Quality cause Distance cause Power budget cause Intracell handover Multiband Power Budget Handover HO inter MSC
23 29/07/2016 © Nokia 2014 - File Name - Version - Creator - DocID Confidential
Nokia features Feature ID
Feature Name
-
Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality Basic functionality
Thanks
24 29/07/2016 Confidential
© Nokia 2014