Cheat sheet for Ericsson mml commandsFull description
UMTSDescrição completa
UMTSFull description
Ericsson CommandsFull description
Ericsson CommandsDescrição completa
Oss commandsFull description
UMTS
UMTS
Descripción completa
Ericsson OSS Commands
Ericsson LTE commands, advanced, commissioning, parameters, RFDescrição completa
Ericsson LTE commands, advanced, commissioning, parameters, RFFull description
Oss commands 1.
To see the TG of particular cellrxtcp:moty=rxotg,cell=(cell name);
2. To see the cf with faults rxmfp:mo=rxocf-(tgno.);
3. To see the tgrxcdp:mo=rxotg-(tgno.);
4. To see the all tru status rxmfp:mo=rxotrx-(tgno.)-(trutei);
5. To see the cf rxmsp:mo=rxocf-(tgno);
6. To see all the devices rxapp:mo=rxotg-(tgno);
7. To see alarm rxasp:mo=rxocf-(tgno.);
8. To see all cf of BSC rlcrp:cell=all;
9. To see all data of Cell rlcrp:cell=(cellname);
10. To see the the software version and cabinet type,BTS-tie value rxmop:mo=rxocf-(tgno);
11. To see external alarm for level 1 allip:acl=a1;
for level 2 allip:acl=a2;
12. to BLOCK the CF rxbli:mo=rxocf-(tgno),subord,force;
the trx rxbli:mo=rxotrx-(tgno)-(trutei),subord, force;
the tx rxbli:mo=rxotx-(tgno)-truei),force;
the tf rxbli:mo=rxotf-(tgno),force; 13. To Deblock the CF rxble:mo=rxocf-(tgno),subord;
the trx rxble:mo=rxotrx-(tgno)-(trutei)subord;
the tx rxble:mo=rxotx-(tgno)-(trutei);
the tf rxble:mo=rxotf-(tgno); 14. To get the Dip name rxapp:mo=rxotg-(tgno); radep:dev=(device of cf); ntcop:snt=(etmno);
15. To see the Dip dtstp:dip=(dipname);
16. To see quality of dip dtqup:dip=(dipname);
17. To reset the dip dtqsr:dip=(dipname),sf,degr,unacc;
18. To see all halted cell in bsc rlcrp:cell=all,state=halt;
19. To out of service cf rxese:mo=rxocf-(tgno),subord; trx rxese:mo=rxotrx-(tgno)-(trutei),subord; tx rxese:mo=rxotx-(tgno)-(trutei); tf rxese:mo=rxotf-(tgno); 20. To in service cf rxesi:mo=rxocf-(tgno),subord; trx rxesi:mo=rxotrx-(tgno)-(trutei),subord; tx rxesi:mo=rxotx-(tgno)-(trutei); tf rxesi:mo=rxotf-(tgno); 21. Some Tip
1. Firstly block the______ 2. Then out of service the___________ 3 Then in service the____________ 4. And then de block the___________ 22. To check the channel rxbdp:cell=(cellname); rxbdc:cell=(cellnm),