V5.4
cover
Front cover
Introduction to IBM i for New Users (Course code OE98)
Instructor Guide ERC 10.0
Instructor Guide
Trademarks IBM® and the IBM logo are registered trademarks of International Business Machines Corporation. The following are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide: AIX® Domino® Lotus® OfficeVision® POWER® POWER7™ System i®
AS/400® i5/OS® Netfinity® Operating System/400® POWER5™ Power Systems™
DB2® Lotus Notes® Notes® OS/400® POWER6® Redbooks®
Adobe is either a registered trademark or a trademark of Adobe Systems Incorporated in the United States, and/or other countries. Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Linux® is a registered trademark of Linus Torvalds in the United States, other countries, or both. Windows is a trademark of Microsoft Corporation in the United States, other countries, or both. UNIX® is a registered trademark of The Open Group in the United States and other countries. Other product and service names might be trademarks of IBM or other companies.
August 2010 edition The information contained in this document has not been submitted to any formal IBM test and is distributed on an “as is” basis without any warranty either express or implied. The use of this information or the implementation of any of these techniques is a customer responsibility and depends on the customer’s ability to evaluate and integrate them into the customer’s operational environment. While each item may have been reviewed by IBM for accuracy in a specific situation, there is no guarantee that the same or similar results will result elsewhere. Customers attempting to adapt these techniques to their own environments do so at their own risk.
© Copyright International Business Machines Corporation 1996, 2010. This document may not be reproduced in whole or in part without the prior written permission of IBM. Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.
V5.4.0.1 Instructor Guide
TOC
Contents Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Instructor course overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Course description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Agenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv Unit 1. Introduction and overview to IBM i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Topic 1.1: Introduction to the IBM i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 What is the IBM i? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 IBM i expands on a rich heritage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Innovative i technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 IBM i operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 Applications (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Applications (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 Standard interface: Display session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19 What is System i Navigator? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-22 Management Central . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25 IBM Systems Director Navigator for i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28 How does Director Navigator for i compare to System i Navigator? . . . . . . . . . . . 1-30 Topic 1.2: Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-32 Reference: IBM i homepage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-34 Reference: IBM Systems Information Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-36 Information Center: Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-38 IBM Redbooks: System i . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-40 Checkpoint (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-42 Checkpoint (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-44 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-46 Unit 2. Signing on and off the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Topic 2.1:Using 5250 emulation interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5 The Sign On display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Your password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 IBM i Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Accessing Operational Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13 Signing off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15 The keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 Engraved function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19 The Enter key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-21 Page Up and Page Down keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23 Error Reset key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-25
©Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Contents
iii
Instructor Guide
The Print key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27 Field Exit key: A little more than tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29 Numbered function keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31 Topic 2.2:Using System i Navigator interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-33 Sign on to System i Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35 System i Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-37 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40 Topic 2.3:Using Systems Director Navigator for i interface . . . . . . . . . . . . . . . . . .2-42 Enter the following URL into a browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-44 User verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46 Welcome page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-48 Basic operations page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-50 Checkpoint (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-52 Checkpoint (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-54 Checkpoint (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-56 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58 Unit 3. Using supported interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2 Topic 3.1: Using 5250 green screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4 Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-6 User menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-8 Using the message line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10 Let's practice menu navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-12 Using GO command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-14 A special menu: System Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-16 Entry display example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18 List display example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-20 Select the assistance level: F21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-22 Information display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-24 Topic 3.2: Using System i Navigator panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-26 General navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-28 General navigation: Window view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-30 Context-sensitive menu for system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-32 Using the Include function (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-34 Using the Include function (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-36 Using the Columns function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38 Topic 3.3: Using Systems Director Navigator for i pages . . . . . . . . . . . . . . . . . . . .3-40 What is included? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-42 New controls overview (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-44 New controls overview (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-46 New controls overview: Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-48 Basic operations tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-50 Include function for messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-52 Columns function for jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-54 Checkpoint (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-56 Checkpoint (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-58 Exercises 1: Signing on to the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-60 iv
Introduction to IBM i for New Users
©Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4.0.1 Instructor Guide
TOC
Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-62 Unit 4. Using online help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Topic 4.1: Using display session help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Using online information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Extended help information for a display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8 Accessing help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Field help: Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13 Field help: Entry displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-15 Field help: List displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-17 Information Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-19 Topic 4.2: Using System i Navigator help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21 Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-23 Help Topics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25 Help: What can I do with? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27 IBM i Information Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29 Click the Help button for full screen help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31 Click the ? for specific help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33 Topic 4.3: Using Systems Director Navigator for i help . . . . . . . . . . . . . . . . . . . . . 4-35 Learn how to use help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-37 Help: About console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-39 Click ? for help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-42 Setting startup pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-44 Click the twistie for pop-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46 Checkpoint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-48 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50 Unit 5. Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Topic 5.1: Messaging concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5 Types of messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 What is a message queue? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10 Where do messages come from? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12 Topic 5.2: Working with messages on a display screen . . . . . . . . . . . . . . . . . . . . 5-14 The Messages menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16 Send a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19 Receiving messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21 Message line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23 Break messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25 Work with Messages display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27 Replying to an inquiry message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30 Replying to system messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32 Deleting messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34 Message delivery modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-36 Topic 5.3: Working with messages through System i Navigator . . . . . . . . . . . . . . 5-39 Work with messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-41 Message: Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-43 ©Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Contents
v
Instructor Guide
Send a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-45 Displaying system operator messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-47 Topic 5.4: Working with messages through Systems Director Navigator for i . . . .5-49 Work with messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-51 Message: Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-53 Send a message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-55 Displaying system operator messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-57 Checkpoint (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-59 Checkpoint (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-61 Checkpoint (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-63 Exercise 2: Online help and messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-65 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-67 Unit 6. Using CL commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-2 Topic 6.1: Using CL commands through a display session . . . . . . . . . . . . . . . . . . .6-4 Where to find commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-6 CL structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11 More on values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-13 Required and optional parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-15 Where to enter a CL command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-17 The Command Entry display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-19 Entering commands using prompting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-21 CRTLIB command prompting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-23 Entering commands in free format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-25 Keywords are optional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-27 Topic 6.2: Using CL commands through System i Navigator . . . . . . . . . . . . . . . . .6-29 Verify Management Central server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-31 Running a command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-33 Entering a command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-35 Submitting the command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-37 Task Activity: Run Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-39 Finding a command (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-41 Finding a command (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-43 Topic 6.3: Using CL commands through Systems Director Navigator for i . . . . . . .6-45 Running a command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-47 Enter command: Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-49 Entering a command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-51 Checkpoint (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-53 Checkpoint (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-55 Checkpoint (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-57 Exercise 3: Command entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-59 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-61 Unit 7. Managing objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2 Topic 7.1:Managing objects through a display session . . . . . . . . . . . . . . . . . . . . . .7-4 vi
Introduction to IBM i for New Users
©Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4.0.1 Instructor Guide
TOC
What are objects? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6 Libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 Simple name versus qualified name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11 Library list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13 Finding an object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16 Locating an object . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19 Topic 7.2: Managing objects through System i Navigator . . . . . . . . . . . . . . . . . . . 7-21 File Systems: Integrated File System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23 Integrated File System: QSYS.LIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25 Menu options for different object types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27 Topic 7.3: Managing objects through Systems Director Navigator for i . . . . . . . . 7-29 File systems: Integrated File System QSYS.LIB . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31 Find and open your library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-33 Menu options for different object types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-35 Checkpoint (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-37 Checkpoint (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-39 Checkpoint (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-41 Exercise 4: Object management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-43 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-45 Unit 8. Managing your work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Topic 8.1: Managing your work through a display session . . . . . . . . . . . . . . . . . . . 8-5 Types of work on the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-7 Batch jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Work with User Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Work with user job options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14 Controlling Printer Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17 Controlling printer output with WRKSPLF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20 Change a spool file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22 Topic 8.2: Managing work through System i Navigator . . . . . . . . . . . . . . . . . . . . . 8-25 Basic Operations: Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-27 Work Management: Active Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-29 Active Jobs: Customize and Include . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31 Basic Operations: Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33 Basic Operations: Printer Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-35 Open a spool file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-37 Spool file: Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-39 Spool file: Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-42 Spool file: Copy and paste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-44 Spool file: Drag and drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-46 Topic 8.3: Managing work through Systems Director Navigator for i . . . . . . . . . . 8-48 Basic Operations: User Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-50 Work Management: Active Jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-52 Active Jobs: Customize and include . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-54 Basic Operations: Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-56 Basic Operations: Printer Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-59 Open a spool file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-61 ©Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Contents
vii
Instructor Guide
Spool file: Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-63 Spool file: Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-66 Checkpoint (1 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-68 Checkpoint (2 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-70 Checkpoint (3 of 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-72 Exercise 5: Tracking jobs and printouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-74 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-76 Unit 9. Security overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2 Topic 9.1: Security concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-4 System tools used to secure your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-6 User profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-8 User classes and what they can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-11 Assistance levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-14 What authorization can be specified for an object? . . . . . . . . . . . . . . . . . . . . . . . .9-16 Where is object authorization specified? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-19 Topic 9.2: Security changes a user can make . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-22 Changing your password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-24 Changing your profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-27 Assistance level parameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-30 Connection to server: Change Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-32 System tasks: Change Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-34 Checkpoint (1 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-36 Checkpoint (2 of 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-38 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-40 Unit 10. Additional education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1 Unit objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2 IBM Web site for education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4 Power Systems Education . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-6 IBM i Training paths . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-8 IBM i system operator roadmap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-10 Unit summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-12 Class evaluation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-14 Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-16 Appendix A. Menus for system operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Appendix B. Commonly used commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Appendix C. Checkpoint solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1
viii
Introduction to IBM i for New Users
©Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
TMK
Trademarks The reader should recognize that the following terms, which appear in the content of this training document, are official trademarks of IBM or other companies: IBM® and the IBM logo are registered trademarks of International Business Machines Corporation. The following are trademarks of International Business Machines Corporation, registered in many jurisdictions worldwide: AIX® Domino® Lotus® OfficeVision® POWER® POWER7™ System i®
AS/400® i5/OS® Netfinity® Operating System/400® POWER5™ Power Systems™
DB2® Lotus Notes® Notes® OS/400® POWER6® Redbooks®
Adobe is either a registered trademark or a trademark of Adobe Systems Incorporated in the United States, and/or other countries. Pentium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Java and all Java-based trademarks and logos are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Linux® is a registered trademark of Linus Torvalds in the United States, other countries, or both. Windows is a trademark of Microsoft Corporation in the United States, other countries, or both. UNIX® is a registered trademark of The Open Group in the United States and other countries. Other product and service names might be trademarks of IBM or other companies.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Trademarks
ix
Instructor Guide
x
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
pref
Instructor course overview This course enables the students to acquire the skills necessary to be productive users on the Power i System.
Course strategy Teaching strategy Each classroom session uses a combination of facilitated lecture, discussions, group exercises, and demonstrations to convey the material. Introduce the material Inform the students of the objectives of the unit and topic. Give them a brief scenario that will help them understand how the presented material will assist them in performing their jobs. Facilitate the learning experience Involve the students in the learning process. Ask them questions and present classroom scenarios in which students use the available resources to solve situations involving process, procedure, or content on the job. Review the material Review objectives at the conclusion of each unit to ensure that the students have a thorough understanding of the material. Group exercises and labs are used to reinforce knowledge and skills that the students have learned in the previous classroom topics. The instructor serves as a mentor in checking results, answering questions, and providing constructive feedback and evaluation. Course evaluation Evaluation measures the quality, effectiveness, and impact of the course. It enables students to answer the question, "Are the requirements and objectives of the course being met?" For all classes, students will provide feedback on course quality by completing an end-of-course questionnaire. Measurement plan There are no formal tests administered in the class.
© Copyright IBM Corp. 1996, 2010
Instructor course overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
xi
Instructor Guide
Course materials • • • • •
Student Notebook Instructor Guide PowerPoint visuals in PDF form to be displayed Student Exercises Instructor Exercises Guide
Summary of changes in this edition This course has been updated to IBM i V7R1. All screen captures were updated to reflect how the screens look at V7R1. All of the units have been updated to now include support for Systems i Navigator for i. The units teach how to perform functions using a display emulation session, System i Navigator, and Systems Director Navigator for i.
xii
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
pref
Course description Introduction to IBM i for New Users Duration: 1 day Purpose In this classroom course, you will learn basic concepts and skills you need to be productive users on the IBM i. With plenty of hands-on labs, we show everything from signing to the available user interfaces; green screen environment, System i Navigator and Systems Director Navigator for i. You will learn how objects are managed on the system and how you display these objects. You will learn to use Control Language (CL) commands (fast path) and how to work with and manage messages on the system. We will also address how to the system manages work and how you manage your printouts. We will also provide a basic overview of security.
Audience This course is intended for new end users employed in a data processing environment who are new to the IBM i server.
Prerequisites None.
Objectives After completing this course, you should be able to: • Explain the purpose of the IBM i operating systems • Explain IBM i models and generations • Explain which applications are supported • Sign on and off the system from a display station, System i Navigator, and Systems Director Navigator for i • Use the display station keyboard • Use the online help that is available • Use the different interfaces available on the system • Understand how objects are managed on the system
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Course description
xiii
Instructor Guide
• Enter control language (CL) commands • Send and receive messages and work with message queues • Manage work and output • Explain basic security
xiv
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
pref
Agenda Day 1 (00:30) Welcome (00:10) Unit 1 - Introduction and overview to IBM i (00:45) Unit 2 - Signing on and off the system (00:45) Unit 3 - Using supported interfaces (00:30) Unit 4 - Using online help (00:30) Unit 5 - Messages (00:45) Unit 6 - Using CL commands (00:30) Unit 7 - Managing objects (00:30) Unit 8 - Managing your work (00:30) Unit 9 - Security overview (00:10) Unit 10 - Additional education
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Agenda
xv
Instructor Guide
xvi
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 1. Introduction and overview to IBM i Estimated time 00:10
What this unit is about This unit provides a high level overview and introduction to the IBM i.
What you should be able to do After completing this unit, you should be able to: • Describe what is included within the IBM i operating system • Describe the history of the IBM i • List the supported user interfaces • Describe the difference between System i Navigator and Systems Director Navigator for i • List Web sites that contain reference materials for IBM i
How You Will Check Your Progress • Checkpoint questions
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-1
Instructor Guide
Unit objectives IBM i
After completing this course, you should be able to: • Describe what is included within the IBM i operating system • Describe the history of the IBM i • List the supported user interfaces • Describe the difference between System i Navigator and Systems Director Navigator for i • List Web sites that contain reference materials for IBM i
© Copyright IBM Corporation 2010
Figure 1-1. Unit objectives
OE9810.0
Notes:
1-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-3
Instructor Guide
Topic 1.1: Introduction to the IBM i
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 1-2. Topic 1.1: Introduction to the IBM i
5.4
OE9810.0
Notes:
1-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-5
Instructor Guide
What is the IBM i? IBM i
• The world's most popular multiuser business computing system • Sold in more than 120 countries • Enabled in 40 national languages • Installed in 98% of Fortune 100 companies
© Copyright IBM Corporation 2010
Figure 1-3. What is the IBM i?
OE9810.0
Notes:
1-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-7
Instructor Guide
IBM i expands on a rich heritage IBM i
AS/400e iSeries
eServer i5
AS/400 IBM i A technology-friendly architecture supporting continuous innovation without disruption
© Copyright IBM Corporation 2010
Figure 1-4. IBM i expands on a rich heritage
OE9810.0
Notes: Twenty years ago IBM introduced the AS/400, bringing together two of IBM's most successful platforms of the time: S/36 and S/38. It was the first of a new generation of servers with a revolutionary virtualized operating system. It allowed companies to simply write business applications that exploited its integrated database. In 1995, we moved to 64-bit technology. Then, in 2000, we delivered Linux for POWER, extending the platform to open applications. In 2004, we delivered POWER5 and support for AIX. In 2007, we delivered POWER6 with the i570. Finally, in 2010 we started our rollout of the current POWER7 platform.
1-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-9
Instructor Guide
Innovative i technology IBM i
© Copyright IBM Corporation 2010
Figure 1-5. Innovative i technology
OE9810.0
Notes: We have had innovative technology built into the IBM i throughout its life cycle. Here are some of them. These are the things that make our operating system better than the other operating systems out there. The IBM i server delivers tremendous capacity growth in its product line. The IBM i Layer, also known as Technology Independent Machine Interface (TIMI), has made it possible to completely change the underlying hardware with minimum, if any, impact to IBM i applications. TIMI allows the system to incorporate significant new hardware technology quickly and transparently. The ease with which customers have migrated to these powerful systems is a testimony to the fundamental strength of the server’s architecture.
1-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-11
Instructor Guide
IBM i operating system IBM i
IBM i operating system attributes include: • Conceived as a single entity • Some of the highlights: – Ease of installation and use – Database support, DB2 IBM i – Control language (CL) – Comprehensive security to all system resources – – – – –
Productive application development environment System availability Electronic customer support Support for central site maintenance Connectivity to remote devices, systems, and networks
– Support for PC connectivity – GUI support through System i Navigator and Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 1-6. IBM i operating system
OE9810.0
Notes: The IBM i Operating System is conceived as a single entity. This means that facilities, such as relational database, communications, networking capabilities, online help are fully integrated into the operating system and the machine. The user communicates with all components of IBM i using a single command language (Control Language or CL).
1-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-13
Instructor Guide
Applications (1 of 2) IBM i
Client Server solutions: IBM i eServer supports thousands of client/server applications.
e-business: The time is now What does it mean to be an e-business? Yesterday, it meant posting information about your company on the Web and connecting your employees through e-mail. Today it means much more.
Domino for IBM i: Now you can combine the strengths of IBM i and Lotus Domino to position your organization for the 21st century. Use Domino to enhance existing business applications and reach new levels of collaboration and coordination in your organization. Use Domino to create, deploy, and manage e-business solutions on a server known for reliability, salability, and integrated security. © Copyright IBM Corporation 2010
Figure 1-7. Applications (1 of 2)
OE9810.0
Notes: Access for Windows allows you to connect a personal computer (PC) to an IBM i server over a local area network (LAN), a twinaxial connection, or a remote link. It has a complete set of integrated functions that enable desktop users to use IBM i resources as easily as their local PC. Users and application programmers can, with IBM i Access for Windows, quickly processes information, applications, and resources for their entire company. IBM i: Built for e-business With IBM i, you can Web-enable your information systems quickly, securely, and at a lower cost than you might imagine. IBM built the IBM i to be the superior e-business solution for companies like yours. Key features of Domino for IBM i: • Is a full-fledged Lotus Domino server. • Enables the IBM i to be a server in your Notes network. Multiple (partitioned). • Domino servers can run on a single IBM i.
1-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Enables remote dial-in and dial-out. • Provides universal mail exchange among multiple e-mail offerings, including Lotus Notes, OfficeVision, JustMail, POP3, and Internet e-mail. • Integrates data between Domino databases and DB2 for IBM i in both directions. • Synchronizes the Notes Public Address Book and the System Distribution Directory. • Provides simple-to-use mobile computing through the use of Notes replication. • Supports serving Domino Merchant databases and other Web content databases to build e-commerce solutions. • Delivers a highly reliable and available Domino server through IBM i availability features, such as RAID and Mirrored protection. • Integrates Domino for IBM i backup with standard IBM i backup. • Runs as an IBM i application, which isolates the server from other applications and provides server recovery without restarting the entire system. • Co-exists with Lotus Notes servers and Lotus Domino servers on the IBM i Integrated Server and supports replication with all other Lotus Domino servers.
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-15
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
1-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Applications (2 of 2) IBM i
IBM i and Java The e-business software of the future is increasingly being written in Java, and the IBM i operating system is optimized to run Java far faster than other platforms.
IBM i Integration of Windows NT Server In a single server, you can now run business-critical applications on an IBM i and personal productivity and other applications on Windows NT.
DB2 for IBM i This advanced, 64-bit relational database system provides leading-edge performance in new data warehousing and data mining environments. It can satisfy every need from the smallest departmental server to the largest enterprise data warehouse. © Copyright IBM Corporation 2010
Figure 1-8. Applications (2 of 2)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
1-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Standard interface: Display session IBM i
© Copyright IBM Corporation 2010
Figure 1-9. Standard interface: Display session
OE9810.0
Notes: The Standard interface used on the IBM i is a display session. Some users call this a ‘green screen’ because typically the standard screen presented when using this interface uses green writing on a black background. In order to sign on to the system, a user must have a valid user id and password. A security office or system administrator can set up limits and controls that determine what this user can do once signed on to the system. This is using a menu driven interface. A user can select options off of a menu to complete tasks. Sometimes a menu option will call a command and other times it will display another menu with it’s options. It is called menu navigation when going from one menu to the next. You can navigate until the menu option selected calls a specific command. The advantage of a menu driven System is that users do not need to know commands in order to perform user or operator or administrator tasks. With practice and/or repetition, eventually a user will ‘learn’ the commands that are called when a menu option is selected. Once the user is experienced then they can key in commands directly on the command line. It is always faster to key in a command as opposed to using menu navigation as it takes longer to navigate to the correct menu and choose the option off of that menu. © Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-19
Instructor Guide
There are also graphical user interfaces (GUI) options available that users can use instead of a display session. Two GUI alternatives will be introduced in the next two topics.
1-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-21
Instructor Guide
What is System i Navigator? IBM i
• Graphical interface to the system • Installed on a PC as part of IBM I Access for Windows 5770-XE1 • Fully integrated into Windows • Main window: – left pane contains the hierarchical view – right pane displays the details of a selected item • Menu bar: File, Edit, View, Help • Toolbar with smart icons • Context-sensitive toolbars and menus • Drag-and-drop support © Copyright IBM Corporation 2010
Figure 1-10. What is System i Navigator?
OE9810.0
Notes: System i Navigator is one of the graphical user interfaces (GUI) for managing your IBM i servers. System i Navigator makes the operation and administration of the server easier and more productive. Wizards guide you through setting up the supported functions. The homepage Web address for System i Navigator is: http://www-03.ibm.com/systems/i/software/navigator/index.html Listed below is a summary of some of the features, functions, and enhancements for System i Navigator. We will cover some of these features in subsequent units of this course. • Work management (Active jobs, subsystems, job queues, memory pools) • Graphical command prompting • System Values, including system comparison and update via Management Central • Distributed user/group administration via Management Central
1-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Licensed program and Fix creation, distribution, and installation via Management Central • DASD management: Disk balancing, compression, management of disk pools, units • Simple two-node cluster configuration • Backup and Recovery (BRMS GUI plug-in) • Logical Partitioning (LPAR) • Job monitors and performance monitors that keep data for extended time periods • Integrated Netfinity Server: Windows user/group and disk administration
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
1-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Management Central IBM i
© Copyright IBM Corporation 2010
Figure 1-11. Management Central
OE9810.0
Notes: Management Central is a powerful suite of systems management functions that make managing multiple systems as easy as managing a single system. With Management Central, you can manage multiple IBM i servers through a single central system. You no longer have to worry about configuring communications connections to all your IBM i servers or juggling multiple login sessions. Management Central is scalable, flexible, and easily manipulated to fit the needs of your environment. Use Management Central to manage multiple systems quickly and efficiently. Specifically, you can: • Collect inventory: Collect inventory data (users and groups, fixes, system values, hardware resources, software resources, service attributes, and contact information) on a regular basis and store the data on a designated central system. Export any inventory to a PC file to use with PC applications. When you need to send some of this collected data to IBM for service and support, you can choose to do so automatically when the data is collected.
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-25
Instructor Guide
• Manage fixes: Manage fixes (or PTFs, program temporary fixes) and fix groups across multiple systems using modern graphical wizards. For example, use the Compare and Update wizard to automatically compare a group of systems to a model system, find the missing and extra fixes, and send the missing fixes to each system and install them. • Monitor system performance: Monitor the real-time performance of multiple IBM i servers. Compare detailed graphs to help you visualize what is going on with your systems. • Collect performance data: Collect performance data for future analysis by the Performance Tools for IBM i licensed program or other performance report applications. View historical data for metrics that have been collected for an extended period of time for a particular monitor. • Run commands: Define a command, then run the command to multiple systems or a group of systems. Use the Prompt button support for a graphical interface to CL command syntax. Save a CL command that can be run over and over against multiple systems and groups. • Send and install products: Create and install a product that you have defined. Use a wizard to help you create and install your product. You can distribute and install your own applications. You can also create your own fixes to manage your products. • Monitor jobs and servers: Monitor a job or a list of jobs based on job name, job user, job type, subsystem, or server type. • Monitor message queues: Monitor any message queue for a group of messages that you select. You can run a monitor on one or more systems. You can see the details of a message, reply to a message, send a message, and delete a message. • Monitor files: Monitor selected files or all system logs for a specified text string, for a specified size, or just to find out when the file has changed. You can also monitor the IBM i history log for a specified text string. You can monitor files across multiple endpoint systems. • Monitor B2B transaction activity: Monitor your B2B transactions and view a graph of active transactions over time. You can run commands automatically when thresholds are triggered and you can search for and display a specific transaction as well as view a bar graph of the detailed steps of that specific transaction. • Manage users and groups: Manage users and groups across multiple systems using Management Central. Collect an inventory of the users and groups on one or more endpoint systems, and then view, search, or export that inventory to a PC. • Package and send data: Create a list of QSYS or Integrated File System (IFS) files and treat them as a logical or physical group (for example, configuration data, Java applications, HTML Web pages, software programs). • Schedule tasks and jobs: Organize when you want your tasks to occur -- either immediately or at a later time.
1-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-27
Instructor Guide
IBM Systems Director Navigator for i IBM i
• New system management tool • New Web-based tool for managing IBM i • Alternative to System i Navigator • Automatic installation with IBM i version 7.1 • Snap into IBM Systems Director*
© Copyright IBM Corporation 2010
Figure 1-12. IBM Systems Director Navigator for i
OE9810.0
Notes: IBM Systems Director Navigator for i replaces the System i Navigator Tasks for the Web function in i 5.4. System i Navigator Tasks for the Web provided servlet URLs for a subset of System i Navigator (Windows) functions. IBM Systems Director Navigator for i: • “Director” means progressing towards Director interfaces and functionality • “Navigator” means coming from System i Navigator heritage • Tool is part of IBM i and free (no charge) 90% of System i Navigator (Windows) function can be accessed via Web and IBM Systems Director Navigator for i
1-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-29
Instructor Guide
How does Director Navigator for i compare to System i Navigator? IBM i
• IBM Systems Director Navigator for i: – Intended for management of only the server where you point your Web browser – Management Central capabilities are not included – You can use IBM Systems Director cross-platform products for multisystem management
• Both can have functions restricted
© Copyright IBM Corporation 2010
Figure 1-13. How does Director Navigator for i compare to System i Navigator?
OE9810.0
Notes:
1-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-31
Instructor Guide
Topic 1.2: Documentation
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 1-14. Topic 1.2: Documentation
5.4
OE9810.0
Notes:
1-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-33
Instructor Guide
Reference: IBM i homepage IBM i
© Copyright IBM Corporation 2010
Figure 1-15. Reference: IBM i homepage
OE9810.0
Notes: It is recommended that you connect to the IBM homepage for the IBM i and save this as a favorite. Notice the links that are available on the left side of the page to access all of the relevant or additional information that may be of interest to you. The URL to access this Web page is: http://www-03.ibm.com/systems/i/
1-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-35
Instructor Guide
Reference: IBM Systems Information Centers IBM i
© Copyright IBM Corporation 2010
Figure 1-16. Reference: IBM Systems Information Centers
OE9810.0
Notes: IBM no longer ships any hard copy reference materials but instead makes these manuals available by either using the Information Center CD that is shipped with your system or by accessing this same information online via a Web site. The preferred method to use is online as this will always provide you with the most recent or up-to-date information. The Information Center Web site is different, depending on which generation of hardware is installed. • IBM information Centers: http://publib.boulder.ibm.com/eserver/ • IBM i V7R1: http://publib.boulder.ibm.com/infocenter/iseries/v7r1m0/index.jsp • IBM i V6R1: http://publib.boulder.ibm.com/infocenter/iseries/v6r1m0/index.jsp • OS/400 V5R4: http://publib.boulder.ibm.com/infocenter/iseries/v5r4/index.jsp
1-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-37
Instructor Guide
Information Center: Basic operations IBM i
© Copyright IBM Corporation 2010
Figure 1-17. Information Center: Basic operations
OE9810.0
Notes: To display the Web site on this visual, while on the visual on the last page, click IBM i V7R1 Information Center > Basic system operations.
1-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-39
Instructor Guide
IBM Redbooks: System i IBM i
© Copyright IBM Corporation 2010
Figure 1-18. IBM Redbooks: System i
OE9810.0
Notes: To display the Web site on this visual enter the URL: IBM http://www.redbooks.ibm.com/portals/systemi
1-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-41
Instructor Guide
Checkpoint (1 of 2) IBM i
1. Which of the following is a resource for IBM i information? a. b. c. d.
Information Center IBM i home page IBM i Redbooks Web page All the above
2. Which of the following provide a user interface to the IBM i? a. b. c. d. e.
5250 emulation session System i Navigator Systems Director Navigator for i All the above Only two of the above © Copyright IBM Corporation 2010
Figure 1-19. Checkpoint (1 of 2)
OE9810.0
Notes:
1-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 2) IBM i
1. Which of the following is a resource for IBM i information? a. Information Center b. IBM i home page c.
IBM i Redbooks Web page
d. All the above
2. Which of the following provide a user interface to the IBM i? a. 5250 emulation session b. System i Navigator c.
Systems Director Navigator for i
d. All the above e. Only two of the above © Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-43
Instructor Guide
Checkpoint (2 of 2) IBM i
3. Which of the following is supported by IBM i? a. Central site maintenance b. DB2 support c.
Java
d. All the above e. Only two of the above
© Copyright IBM Corporation 2010
Figure 1-20. Checkpoint (2 of 2)
OE9810.0
Notes:
1-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 2) IBM i
3. Which of the following is supported by IBM i? a. b. c. d. e.
Central site maintenance DB2 support Java All the above Only two of the above
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-45
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Describe what is included within the IBM i operating system • Describe the history of the IBM i • List the supported user interfaces • Describe the difference between System i Navigator and Systems Director Navigator for i • List Web sites that contain reference materials for IBM i
© Copyright IBM Corporation 2010
Figure 1-21. Unit summary
OE9810.0
Notes:
1-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 1. Introduction and overview to IBM i
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
1-47
Instructor Guide
1-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 2. Signing on and off the system Estimated time 00:45
What this unit is about This first thing you need to do to start a session is to sign on to the system. In this unit you will be introduced to signing on via the 5250 emulation session commonly known as using the display session interface, signing on and using System i Navigator graphical user interface (GUI) and Systems Director Navigator for i browser interface. The first topic in this unit introduces you to the display session interface. In this unit the student will also be introduced to the Operational Assistant user interface which will be the interface used for the majority of this course. This unit also covers the different keyboard types so that you can become productive on your system quickly. The second topic then covers using the System i Navigator GUI to perform these same functions. The third topic covers using the IBM Systems Director Navigator for i GUI.
What you should be able to do After completing this unit, you should be able to: • Sign on and off the display session interface (5250 emulation) • Use all the engraved and numbered function keys on the keyboard • Access the Operational Assistant menu • Sign on and off using System i Navigator • Sign on and off using Systems Director navigator for i
How You Will Check Your Progress • During the lecture you will sign on and use some commands and function keys. • During the Lab exercise you will try out your new keyboard skills.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-1
Instructor Guide
• Checkpoint questions
2-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit objectives IBM i
After completing this unit, you should be able to: • Sign on and off the display session interface (5250 emulation) • Use all the engraved and numbered function keys on the keyboard • Access the Operational Assistant menu • Sign on and off using System i Navigator • Sign on and off using IBM Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 2-1. Unit objectives
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-3
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 2.1: Using 5250 emulation interface
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 2-2. Topic 2.1:Using 5250 emulation interface
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-5
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
The Sign On display IBM i
Only two lines are important now: User and Password Type your user name on the User line: OE98xx Press Tab.
© Copyright IBM Corporation 2010
Figure 2-3. The Sign On display
OE9810.0
Notes: If you make a mistake while typing your name, you can easily correct it by using the Backspace key located on the upper right-hand corner of the keyboard. The appearance of the Backspace key may be different depending on what keyboard is being used. When you press the Backspace key the cursor will move to the left one space. You now can type over the spelling mistake to correct it. If you have extra letters left over use the Delete key. The appearance of the Sign On screen may be different at your workplace. Many of our customers create company logos as part of the Sign On screen. The visual shows the IBM-shipped default Sign On screen.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-7
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Your password IBM i
• Should not be known by other users • Will be invisible (non-display) when typed
It's a secret!
• If a mistake is made when either the user ID or the password is entered, an error message is displayed. • The number of times a mistake can be made may be limited on your system
Type your password: OE98PWD Press Enter © Copyright IBM Corporation 2010
Figure 2-4. Your password
OE9810.0
Notes: Do not worry about making a mistake while typing your password on this course; it is not a serious problem. However back at your workplace, the system might be set up to restrict the number of times you can make a mistake before the system takes some action to prevent you from signing on. You should ask your system operator for guidance. If you make a mistake while on this course, the system will tell you by presenting a message at the bottom of the screen: “Password not correct for user profile.” You will have to enter your password again. Please note the cursor will return to the User line. From here, you can check your spelling of the user name. Then press the Tab key to go to the password line and reenter your password.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-9
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
IBM i Main Menu IBM i
• The menu you see, depends on how your user profile has been set up. • The exact appearance of the menu depends on your user class. © Copyright IBM Corporation 2010
Figure 2-5. IBM i Main Menu
OE9810.0
Notes: As indicated, the menu that displays at your workplace will depend on how your user profile was setup by the system administrator. We will cover the user profile later in this course. Shown on the screen is the IBM i Main Menu. All of the menus provided by IBM will show the name of the menu in the upper left-hand corner of the screen. The options on the IBM i Main Menu are used to access the more complex system functions.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-11
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Accessing Operational Assistant IBM i
• To perform the tasks in this course, it is necessary to start from this menu. • Can be accessed by: – Pressing the Attn key or ESC key – Selecting an option off a menu – Typing GO ASSIST on a command line Press the Attn. key. © Copyright IBM Corporation 2010
Figure 2-6. Accessing Operational Assistant
OE9810.0
Notes: The IBM i Operational Assistant menu provides easy access to most commonly performed functions. This is a menu interface used for users who are new to the system and / or may not be technically proficient. As much as possible this menu interface will use standard terminology instead of technical terms. The strategy is for users to use this menu interface to become familiar with the system, to get over any fears of working on a new system. Once the user becomes comfortable on the system then the administrator will begin to wean the user off of this menu and will instruct users to start using and working off of the Main menu. This course presents the basic IBM i tasks that can be performed through the Operational Assistant menu.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-13
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Signing off IBM i
• You can sign off your IBM i session in one of the following ways: – Use the sign off option from an application display. – Use Option 80 from the Operational Assistant menu. – Use Option 90 from the System i Main Menu. – Type SIGNOFF on a command line.
........................................................... Select Option 90 from the Main menu or Option 80 from Operational Assistant ........................................................... © Copyright IBM Corporation 2010
Figure 2-7. Signing off
OE9810.0
Notes: Option 80 (Temporary sign off) allows you to temporarily suspend the application you are working in until you sign back on to your next IBM i session. This option can be used when you go to lunch. After signing back on again, you can go directly to where you left off without having to work your way through a lot of unnecessary displays. NOTE: The requirement for you to be able to sign back onto your interrupted job is that you must leave the emulation session window open on your windows desktop. If you sign off of the system and then close the emulation window you will not be able to reconnect to your interrupted job. You should be that aware there is a limit to the length of time you can be temporarily signed off. You should ask your system operator what the limit is for your system. If this time is exceeded, the job you were working on will be ENDED. You will have to start all over again.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-15
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
The keyboard IBM i
Your keyboard contains: • Engraved functions keys • Enter key • Page up / Page down keys • Error reset key
- Depends on how keyboard was set up - Details on the following pages
• Print key • Field Exit key • Numbered function keys
© Copyright IBM Corporation 2010
Figure 2-8. The keyboard
OE9810.0
Notes: The versatility of the IBM i system allows many possible display station and keyboard combinations. If you have questions (particularly if you are using a PC keyboard), refer to your display station’s User Guide or keyboard manual. You should be aware that keyboards can be programmed to perform functions different from standard operations. For example, the Print key could be set to perform some other function than printing the screen contents.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Engraved function keys IBM i
Information about function keys: • The function keys have words, abbreviations of word, or symbols printed on them. • Generally, each of these keys performs a single function. • We will use the name that is used on most keyboards. • If an engraved function key shown here is not available on your keyboard, refer to Appendix E, "Keyboards" in the System Operation for New Users manual.
Enter
© Copyright IBM Corporation 2010
Figure 2-9. Engraved function keys
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-19
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
The Enter key IBM i
• Use the Enter key to submit information that you have entered on the display for the system to process.
Enter
• Commands or menu options are examples of information you want the system to process.
© Copyright IBM Corporation 2010
Figure 2-10. The Enter key
OE9810.0
Notes: Be Careful! The Enter key on some personal computers looks like a New Line key. Pressing this key may prematurely submit the information you are entering.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-21
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Page Up and Page Down keys IBM i
Page Up
• Called Roll keys on some keyboards.
Page Down
• When More.. is shown in the lower right-hand corner of a display, Page Down can be used to move toward the bottom of the information and Page Up can be used to move toward the top. Type a reply, press Enter More. . . = = = > _________________________________________________ F3=Exit
F12 =Cancel
© Copyright IBM Corporation 2010
Figure 2-11. Page Up and Page Down keys
OE9810.0
Notes: On some keyboards, the Page Up and Page Down keys are called ROLL KEYS. Please note that when the word MORE appears in the lower right-hand corner, you can use the Page Down key to view the next screen. When you have reached the bottom of the text, the system will display BOTTOM. At this point, you can use the Page Up key to scroll to the beginning of the text. How you use these keys depends on the type of display station you have: • With 5250 display stations press and hold the Shift Key and press the appropriate Roll keys. • With PCs press the Page Up or Page Down keys as needed.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Error Reset key IBM i
• If your keyboard becomes “locked up” (it fails to respond to anything you type), you can press the Error Reset key to unlock your keyboard and continue typing.
Error 0005
0005
• On most PCs, the Error Reset key is the left Control (Ctrl) key.
Ctr l
© Copyright IBM Corporation 2010
Figure 2-12. Error Reset key
OE9810.0
Notes: Sometimes, your keyboard will lock up (will not allow you to enter anything); pressing the Error Reset key will unlock or reset the keyboard.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
The Print key IBM i
• Used to print information currently shown on the display ASSIST
Operational Assistant(TM) Menu
System: I520DVL3 To select one of the following, type its number below and press Enter: 1. 2.
Print Screen
Work with printer output Work with jobs
Print
Ctr l
The location of the Print key varies, depending on the keyboard. © Copyright IBM Corporation 2010
Figure 2-13. The Print key
OE9810.0
Notes: When you press the Print key, one of the following will occur: • The displayed information is printed immediately on the system printer or on the printer assigned to your job. A message then appears at the bottom of the screen indicating if your job was printed or if a Spool file was created. You will need to press the Error Reset key to unlock your keyboard. • Nothing is printing because the printer assigned to your display station is currently not available. Again, you will receive a message at the bottom of the screen that indicates the request could not be completed. • This information and other information are put on an OUTPUT QUEUE (this will be explained later in this course). Again, you will have to use the Error Reset key to unlock your keyboard.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-27
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Field Exit key: A little more than tab IBM i
The Field Exit key moves to the next field, but with a difference: Any characters at, and to the right of the cursor in the field where you were typing, are deleted.
Message text . . . . . . . . . . . . . Send to . . . . . . . . . . . . . . . . . .
Here is my message throw away ________________ Name , F4 for list
Before: Cursor is here
Message text . . . . . . . . . . . . . Send to . . . . . . . . . . . . . . . . . .
Here is my message ___________ ________________ Name , F4 for list
After: Cursor is now here © Copyright IBM Corporation 2010
Figure 2-14. Field Exit key: A little more than tab
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-29
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Numbered function keys IBM i
• On most keyboards, including PC’s, the function keys are the top row of keys or are on a pad on the right side of the keyboard. They have the letter F on them.
Ctr l
• If you have only one row of function keys, to use the F13 through F24 keys, you need to use the Shift key along with the corresponding function keys. Foe example: Press the Shift key and the F1 key to specify F13. Selection or command ===>_________________________________________________________________ _____________________________________________________________________ F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant F23= Set initial menu © Copyright IBM Corporation 2010
Figure 2-15. Numbered function keys
OE9810.0
Notes: The Function keys that you can use are listed at the bottom of the screen, along with a brief description of the functions they will perform. Please note that different function keys will be presented, depending on the screen you are on and your user profile. (We will cover your user profile later in this course.)
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-31
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 2.2: Using System i Navigator interface
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 2-16. Topic 2.2:Using System i Navigator interface
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-33
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Sign on to System i Navigator IBM i
© Copyright IBM Corporation 2010
Figure 2-17. Sign on to System i Navigator
OE9810.0
Notes: System i Navigator prompts for a user ID and password. This it is the same user ID and password that you would use if you are signing on to a 5250 display session emulation session. If you are a new user on this system then contact your system administrator for a valid user ID and password.
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-35
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
2-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
System i Navigator IBM i
© Copyright IBM Corporation 2010
Figure 2-18. System i Navigator
OE9810.0
Notes: As a user, the functions available to use or display are controlled by both the user ID and the IBM i Access software loaded on the PC. In some ways IBM i appears like Windows Explorer. Windows Explorer lists file folders (directories) and files. Systems i Navigator displays IBM i systems and a central management point for systems attached. The left-hand side of the display shows the systems that are managed by Management Central. Then listed under My Connections are all the IBM i systems that have been defined by your system administrator to Systems i Navigator. Assuming you have a valid user id and password you can sign on to these systems to perform user, system operator or system administrator tasks; based on what authority is assigned to your user profile. The right-hand side of the display shows the details of what has been highlighted and selected on the left. The bottom area is known as the task pad. This area presents you different options or functions you can perform. © Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-37
Instructor Guide
The functions displayed for each system are dependent on the IBM i operating system release the system is running.
2-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-39
Instructor Guide
Basic operations IBM i
© Copyright IBM Corporation 2010
Figure 2-19. Basic operations
OE9810.0
Notes: Basic Operations is the only branch of the Navigator tree that is automatically installed on your PC when you install IBM i Access for Windows. With this interface there is no option provided to ‘sign off’ the system. You can sign off of windows and log in with a different windows user id or you can reboot your PC to clear the memory buffer (to clear you user id and password).
2-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-41
Instructor Guide
Topic 2.3: Using Systems Director Navigator for i interface
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 2-20. Topic 2.3:Using Systems Director Navigator for i interface
5.4
OE9810.0
Notes:
2-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-43
Instructor Guide
Enter the following URL into a browser IBM i
http://system:2001 ‘system’ could be either the IP address or IP name
Supports the following browsers: • Microsoft Internet Explorer, 6.0 or later • Mozilla Firefox, 1.0 or later
© Copyright IBM Corporation 2010
Figure 2-21. Enter the following URL into a browser
OE9810.0
Notes: To establish a connection to the system using Systems Director Navigator for i, open one of the supported browsers and specify either the TCP/IP name or address of your system and port 2001.
2-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-45
Instructor Guide
User verification IBM i
• The URL will be rerouted to a secure path – Port 2005. • Enter your IBM i user ID and password for this system.
© Copyright IBM Corporation 2010
Figure 2-22. User verification
OE9810.0
Notes: The system will redirect your connection to port 2005 and prompt you to enter your user id and password. This is the same information that you would enter when signing to a 5250 display session or System i Navigator session.
2-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-47
Instructor Guide
Welcome page IBM i
© Copyright IBM Corporation 2010
Figure 2-23. Welcome page
OE9810.0
Notes: The first time you connect to the system you will see the Welcome panel. The panel can be turned off so that it is not the first thing you see when you sign on using this interface. Notice that the first link in the upper left side of the screen is used to call up this panel.
2-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-49
Instructor Guide
Basic operations page IBM i
© Copyright IBM Corporation 2010
Figure 2-24. Basic operations page
OE9810.0
Notes: Remember to sign off of the system before you close this browser window. If you close this window without first signing off you will leave a job running the on system. The system will go into error recovery to try to fix the job that ‘lost’ the communications with your PC.
2-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-51
Instructor Guide
Checkpoint (1 of 3) IBM i
1. To sign on to an IBM i using 5250 emulation, you will need a user ID, password, and program ID. a. True b. False
2. It is possible to customize the main menu the user will see when logging on to an IBM i. a. True b. False
3. Which keys on a PC keyboard can clear the "More" when it is displayed in the lower right-hand corner of the screen? a. b. c. d.
Enter key Ctrl key Pause PgUp or PgDn © Copyright IBM Corporation 2010
Figure 2-25. Checkpoint (1 of 3)
OE9810.0
Notes:
2-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 3) IBM i
1. To sign on to an IBM i using 5250 emulation, you will need a user ID, password, and program ID. a. True b. False
2. It is possible to customize the main menu the user will see when logging on to an IBM i. a. True b. False
3. Which keys on a PC keyboard can clear the "More" when it is displayed in the lower right-hand corner of the screen? a. b. c. d.
Enter key Ctrl key Pause PgUp or PgDn © Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-53
Instructor Guide
Checkpoint (2 of 3) IBM i
4. Which of the following is a method to access Operational Assistant? a. b. c. d.
Pressing the ESC key Pressing the Ctrl Break key Selecting option 80 on the menu screen Typing "go assist" on the command line
5. You can use the same user ID and password to sign on to System i Navigator that you use to sign on to a display session on the same system. a. True b. False
© Copyright IBM Corporation 2010
Figure 2-26. Checkpoint (2 of 3)
OE9810.0
Notes:
2-54 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 3) IBM i
4. Which of the following is a method to access Operational Assistant? a. b. c. d.
Pressing the ESC key Pressing the Ctrl Break key Selecting option 80 on the menu screen Typing "go assist" on the command line
5. You can use the same user ID and password to sign on to System i Navigator that you use to sign on to a display session on the same system. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-55
Instructor Guide
Checkpoint (3 of 3) IBM i
6. You must make a choice to either sign on to the display session or System i Navigator, since you cannot sign on to both at the same time. a. True b. False
7. IBM Systems Director Navigator for i can be used to perform which of the following tasks? a. b. c. d.
User System operator System administrator All of the above
© Copyright IBM Corporation 2010
Figure 2-27. Checkpoint (3 of 3)
OE9810.0
Notes:
2-56 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (3 of 3) IBM i
6. You must make a choice to either sign on to the display session or System i Navigator, since you cannot sign on to both at the same time. a. True b. False
7. IBM Systems Director Navigator for i can be used to perform which of the following tasks? a. b. c. d.
User System operator System administrator All of the above
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-57
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Sign on and off the display session interface (5250 emulation) • Use all the engraved and numbered function keys on the keyboard • Access the Operational Assistant menu • Sign on and off using System i Navigator • Sign on and off using Systems Director navigator for i
© Copyright IBM Corporation 2010
Figure 2-28. Unit summary
OE9810.0
Notes:
2-58 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 2. Signing on and off the system
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
2-59
Instructor Guide
2-60 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 3. Using supported interfaces Estimated time 00:45
What this unit is about When you request system functions on the IBM i, the system will respond by displaying information to you and sometimes by asking you for information. The format used by the system will be one of the following: • Menu • Entry display • List display • Information display In this unit, you will learn how to work with these types of displays.
What you should be able to do After completing this unit, you should be able to: • Sign on to the 5250 green screen emulation interface and use: - Menus - Entry displays - List displays - Information displays • Sign on the system with System i Navigator • Sign on the system with Systems Director Navigator for i
How You Will Check Your Progress • During the lecture you will follow along with the instructor. • During the lab exercise you will practice using the display types covered in lecture. • Checkpoint questions
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Sign on to the 5250 green screen emulation interface and use: – Menus – Entry displays – List displays – Information displays
• Sign on the system with System i Navigator • Sign on the system with Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 3-1. Unit objectives
OE9810.0
Notes:
3-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-3
Instructor Guide
Topic 3.1: Using 5250 green screen displays
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 3-2. Topic 3.1: Using 5250 green screen displays
5.4
OE9810.0
Notes:
3-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-5
Instructor Guide
Menus IBM i
• The purpose of a menu is to provide a convenient way to select the work to be done. • Choosing an option from a menu is easier than entering long strings of commands. • With a menu, there is no need to remember commands.
M enus It's Easy
© Copyright IBM Corporation 2010
Figure 3-3. Menus
OE9810.0
Notes: Welcome to the display session (some users call it the green screen because of the appearance of the default screen) environment. The IBM i has been using these types of screens from its introduction in 1986. The vast majority of our customers in the general business environment prefer these types of screens over the graphical Interface available.
3-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-7
Instructor Guide
User menu IBM i
Menu ID
Menu title
Input area
List of options
Function Keys
Message line © Copyright IBM Corporation 2010
Figure 3-4. User menu
OE9810.0
Notes: The title is in the middle of the top of the screen. The menu ID is in the upper left-hand corner. Menus are the only types of displays that have menu IDs. The options listed may vary because your system administrator may have eliminated some options to simplify your job. Note the Input area (referred to as the command line); this is the place where you can enter commands or options listed on the menu above. Below the Input line is a list of function keys with a brief description of what each key does. The point to remember is that function keys will also vary depending on which menu you are using. If there are more function keys available, you will see F24 = more keys to display any additional function keys that may be available.
3-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-9
Instructor Guide
Using the message line IBM i
• If you are in the Operational Assistant menus input area: – Type 79. – Press Enter. Message line displays: Specified menu selection is not correct
• Press Field Exit to clear the input area: – Press Enter. Message line displays: Type option number
• Put your cursor on the message and press HELP. – Additional information is displayed – Press F12 to go back to the menu. © Copyright IBM Corporation 2010
Figure 3-5. Using the message line
OE9810.0
Notes: The Message line is at the bottom of the screen and typically is just one line long. The system uses this line to communicate with you, posting information and corrective action if required from you. In addition to this message line, you can move your cursor to a message (if posted) and press your HELP key for more detailed information about the message. We will cover Using Help on the system later in this course.
3-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-11
Instructor Guide
Let's practice menu navigation IBM i
Operational Assistant Menu Option 75
F12
Information and Problem Handling
• In this case, F3 accomplishes the same action. • F3 goes back to the previous menu.
USERHELP Menu
• F12 goes back to the previous display.
Option 1 How to use Help is a display
F12
© Copyright IBM Corporation 2010
Figure 3-6. Let's practice menu navigation
OE9810.0
Notes: The F3 key is your Exit key; use this key to get out of whatever you are doing. Officially, the F3 key is used to exit the program or function you are in and return you to the previous menu. The F12 key is easily confused with the F3 key. While F3 takes you completely out of the situation, pressing the F12 key usually takes you back to the previous display.
3-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-13
Instructor Guide
Using GO command IBM i
• You can go to a specific menu by using the GO command. • Type GO followed by the menu name on any command line Selection or command ===>___________________________________________________________________________ GO ASSIST _______________________________________________________________________________ F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant F23= Set initial menu
• To see all of the menus that are available on the IBM i, type GO *ALL. GO PRINTER GO SAVE GO MAIN GO ASSIST
Some Useful menus
GO BACKUP GO TAPE GO PROBLEM GO PTF
© Copyright IBM Corporation 2010
Figure 3-7. Using GO command
OE9810.0
Notes: If you cannot remember the exact menu name you wish to use, type GO and the first letter of the menu name followed by an asterisk. For example: GO P* will provide a list of menu names starting with the letter P. The visual on this page shows some useful GO menu commands that you can try later in lab. Note: Refer to Appendix A for a list of the more commonly used menus.
3-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-15
Instructor Guide
A special menu: System Request IBM i
• Can be used to start an alternative session at your display station • Once the second session is started, System Request menu can be used to switch between your two active sessions. • To access the System Request menu: Press System Request. Press Enter. The System Request menu is displayed.
© Copyright IBM Corporation 2010
Figure 3-8. A special menu: System Request
OE9810.0
Notes: If you choose Option 1, the system will present a second Sign On screen and allow you to sign on to a second session. However, if you do this, the job (interactive job) you were doing will become temporarily suspended (all work within that job is suspended). This job will not begin again until you sign off the second session or you use the System Request key to jump back to or switch to session 1. There are many reasons you might want to use System Request. For example, look at Option 4 Display messages and Option 5 Send messages.
3-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-17
Instructor Guide
Entry display example IBM i
• Default values are provided for most fields • Required fields are usually highlighted • You can prompt the system for possible choices by placing the cursor somewhere within an entry field and pressing F4 key
F4
© Copyright IBM Corporation 2010
Figure 3-9. Entry display example
OE9810.0
Notes: Entry displays prompt you or ask you for information. There are many different displays on the system. Most of the entry fields are already filled in for you, the filled-in fields are using system defaults. The F4 key can be used to prompt you for possible choices. We will try this in the lab.
3-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-19
Instructor Guide
List display example IBM i
Options available
More items on next page use Page Up
Input field where option number may be typed © Copyright IBM Corporation 2010
Figure 3-10. List display example
OE9810.0
Notes: Information requested by you is gathered from within the system and displayed in columns. The options available vary depending on the purpose of the display and your user authority. The word Bottom appears in the lower right-hand corner if this is the last page of text. Occasionally, you might see an Extended list display. The information on this type of list display does not fit within one screen. By using the F11 key, you will be able to shift the text (right or left) on the screen.
3-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-21
Instructor Guide
Select the assistance level: F21 IBM i
© Copyright IBM Corporation 2010
Figure 3-11. Select the assistance level: F21
OE9810.0
Notes: By using the F21 function key, the present setting will be overruled only for the display you are in. The system will remember this setting and will use it any time you return to this particular display. • Assistance level 1: The system will not use computer jargon when communicating with you. Basic operation only (less job control). • Assistance level 2: Will allow more job control, but the system will use computer jargon when it communicates to you. • Example: - Assistance level 1 = System would display printer not available - Assistance level 2 = System would display device not vary on
3-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-23
Instructor Guide
Information display IBM i
• The page contains information only. • It does not need input data from you. • The purpose is to pass information from the system to the user. © Copyright IBM Corporation 2010
Figure 3-12. Information display
OE9810.0
Notes:
3-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-25
Instructor Guide
Topic 3.2: Using System i Navigator panels
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 3-13. Topic 3.2: Using System i Navigator panels
5.4
OE9810.0
Notes:
3-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-27
Instructor Guide
General navigation IBM i
The layout and navigation functions are as follows: • Main window: (1) Left pane contains the hierarchical view
• • • •
(2) Right pane displays the details of a selected item (3) Task pad show shortcuts, change as you select a function (4) My taskpad does not change, contains shortcuts you copy here Menu bar: File, Edit, View, Help Toolbar with smart icons Context-sensitive toolbars and menus Drag-and-drop support
1
2
4
3
© Copyright IBM Corporation 2010
Figure 3-14. General navigation
OE9810.0
Notes: This visual provides a list of many of the terms and actions you can take by accessing the various levels of IBM i functions.
3-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-29
Instructor Guide
General navigation: Window view IBM i
List header
Menu Options in Menu Bar or Pull down Menu Buttons in Toolbar
Column headings
Collapse button
Function Tree
Left pane
Right pane Details pane
Function, Container, or subfunction
List view
Expand button
Scroll up/down
Expand/ Collapse pane Separator Scroll left/right Status Bar
© Copyright IBM Corporation 2010
Figure 3-15. General navigation: Window view
OE9810.0
Notes: Consider the left pane as the function tree area with a + (plus sign) character to the left of a function (container), which indicates there are lower level functions/containers. Clicking the + expands the function. Once an item is expanded, the - (minus) character appears. You can click it to collapse the detailed items back to the higher level item. Right-clicking an item brings up a pop up menu that includes a list of one or more actions. This is called a context-sensitive menu because the list of actions depends on the item on which you right-click. There are also context-sensitive toolbars. You can expand or shrink the area of the window with your mouse by dragging the vertical or horizontal edges of a window pane. This is especially important when you have a list of items in the right pane since you may have more columns of information than you can see on your physical device. Some functions automatically update the right pane of information when some status changes. Other functions do not, so you must either periodically use the F5 key or click the Refresh button in the toolbar.
3-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-31
Instructor Guide
Context-sensitive menu for system IBM i
© Copyright IBM Corporation 2010
Figure 3-16. Context-sensitive menu for system
OE9810.0
Notes: You can access the menu for a system by selecting (clicking) the system and selecting the File option or right-clicking the system name. We show Properties to illustrate the many sets of information available for the system. You can see what IBM i release the system has installed and many other sets of information including: • Current IPL settings • Which plug-ins you have installed • Current connection settings • Current Secure Socket Layers settings • Manage Central Application Administration • Administration of the Directory Server • Service Tools network interface
3-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Discuss how to call up context menus (the different ways these are called up) • Do not describe the system properties themselves Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-33
Instructor Guide
Using the Include function (1 of 2) IBM i
OR
© Copyright IBM Corporation 2010
Figure 3-17. Using the Include function (1 of 2)
OE9810.0
Notes: When you first use System i Navigator, some functions such as Basic Operations -> Messages, default to show messages only for the user who has signed on through System i Navigator. This is termed the “current user.” While other functions may default to show “all” jobs in the system. The Include function can be used to expand or limit the set of information that will appear in the right pane details list. Just like on the green screen where there are multiple ways to perform a function, the same is true with GUI. To call up the ‘Include’ function you must first highlight the function of interest, for example Messages or Printer output or Jobs, then you will either: • Right clicked the container that is highlighted • Click view • Press the F11 key and then selected Include from the context menu.
3-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-35
Instructor Guide
Using the Include function (2 of 2) IBM i
© Copyright IBM Corporation 2010
Figure 3-18. Using the Include function (2 of 2)
OE9810.0
Notes: On this page we see the window that pop up when using the ‘Include’ function for: • Messages which is actually displaying the GUI for the Display message (DSPMSG) command • Printer output is actually displaying the GUI for the Work with spool files (WRKSPLF) command • Jobs is actually displaying the GUI for the Work with user jobs (WRKUSRJOB) command
3-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-37
Instructor Guide
Using the Columns function IBM i
© Copyright IBM Corporation 2010
Figure 3-19. Using the Columns function
OE9810.0
Notes: When you perform a function that produces a list in the right pane, you may not see all the available fields of information, here called “columns.” This could be because the active window is not wide enough to show all columns (watch the scroll right - left indication in the lower area of the right pane). You may also not see all the information when there may be “additional columns” all of which either do not fit on a full physical screen width or are considered by default as “optional” information. The column function lets you add columns of information (if any), remove columns of information, or rearrange the left to right order of the column information.
3-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-39
Instructor Guide
Topic 3.3: Using Systems Director Navigator for i pages
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 3-20. Topic 3.3: Using Systems Director Navigator for i pages
5.4
OE9810.0
Notes:
3-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-41
Instructor Guide
What is included? IBM i
• All Web-enabled functions of System i Navigator, organized into 13 different task categories (over 300 tasks total) – Jobs, messages, system values, database, users, file systems, security, performance, and so on
• In addition, functions from the following for-purchase LPPs will be available in the console when the LPPs are installed: – iHASM (System i High Availability Solutions Manager)
5761-HAS
– BRMS (Backup, Recovery, and Media Services)
5761-BR1
– IBM Performance Tools for i5/OS (DiskWatcher)
5761-PT1
– IBM Performance Tools for i5/OS (JobWatcher)
5761-PT1 option 3
© Copyright IBM Corporation 2010
Figure 3-21. What is included?
OE9810.0
Notes:
3-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-43
Instructor Guide
New controls overview (1 of 2) IBM i
Left navigation groups all the tasks in logical compartments
New tab for each view
Help link!
Most common functions included on each Welcome menu
All functions
© Copyright IBM Corporation 2010
Figure 3-22. New controls overview (1 of 2)
OE9810.0
Notes:
3-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-45
Instructor Guide
New controls overview (2 of 2) IBM i
Fast path icons to Table tasks
Select from the available actions • Object tasks
• Filters
• Category tasks
• Sorts
• Table tasks
• Entry selection
o Columns, Filters, Sorts
Select an entry. • Click the arrow. • Tasks for object.
© Copyright IBM Corporation 2010
Figure 3-23. New controls overview (2 of 2)
OE9810.0
Notes:
3-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-47
Instructor Guide
New controls overview: Terms IBM i
Banner: Common image across all consoles
Page Bar: Navigate between pages
Navigation Tree: Group tasks
Work area © Copyright IBM Corporation 2010
Figure 3-24. New controls overview: Terms
OE9810.0
Notes:
3-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-49
Instructor Guide
Basic operations tasks IBM i
© Copyright IBM Corporation 2010
Figure 3-25. Basic operations tasks
OE9810.0
Notes: Notice that the Basic Operations task is essentially the same when compared to System i Navigator. Choose a task to see the ‘Include’ and the ‘Columns’ functions.
3-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-51
Instructor Guide
Include function for messages IBM i
© Copyright IBM Corporation 2010
Figure 3-26. Include function for messages
OE9810.0
Notes: Just like in System i Navigator, the include function also available with this interface but the operations to call up this function are slightly different. • First you will click on the specific task that you will perform, in this example the messages task. • Once you are displaying this task then click the down arrow and click on the include function. • This will display the panel in the lower right corner of the display so you can specify which messages to include in the display.
3-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-53
Instructor Guide
Columns function for jobs IBM i
© Copyright IBM Corporation 2010
Figure 3-27. Columns function for jobs
OE9810.0
Notes: Just like in System i Navigator, the columns function also available with this interface but the operations to call up this function are slightly different. • First you will click on the specific task that you will perform, in this example the jobs task. • Once you are displaying this task then click the down arrow and click on the columns function. • This will display the panel in the lower right corner of the display so you can specify which columns of information to display.
3-54 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-55
Instructor Guide
Checkpoint (1 of 2) IBM i
1. You can prompt the system for possible choices by placing the cursor somewhere within an entry field and pressing the ___ key. a. F3 b. F4 c. F5 d. F6
2. Which assistance level will allow you job control and uses computer jargon to communicate with you? a. Assistance level 1 b. Assistance level 2
© Copyright IBM Corporation 2010
Figure 3-28. Checkpoint (1 of 2)
OE9810.0
Notes:
3-56 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 2) IBM i
1. You can prompt the system for possible choices by placing the cursor somewhere within an entry field and pressing the ___ key. a. b. c. d.
F3 F4 F5 F6
2. Which assistance level will allow you job control and uses computer jargon to communicate with you? a. Assistance level 1 b. Assistance level 2
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-57
Instructor Guide
Checkpoint (2 of 2) IBM i
3. Using System request can start an alternate session at your display station. a. True b. False
4. Using the include function, it is possible to specify what information is to be displayed for a task using the GUI . a. True b. False
5. Using the include columns function, it is possible to choose which columns of information and in what order they are displayed in a 5250 green screen session. a. True b. False © Copyright IBM Corporation 2010
Figure 3-29. Checkpoint (2 of 2)
OE9810.0
Notes:
3-58 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 2) IBM i
3. Using System request can start an alternate session at your display station. a. True b. False
4. Using the include function, it is possible to specify what information is to be displayed for a task using the GUI . a. True b. False
5. Using the include columns function, it is possible to choose which columns of information and in what order they are displayed in a 5250 green screen session. a. True b. False © Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-59
Instructor Guide
Exercises 1: Signing on to the system IBM i
Please complete Exercises 1 Signing on to the system
© Copyright IBM Corporation 2010
Figure 3-30. Exercises 1: Signing on to the system
OE9810.0
Notes:
3-60 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-61
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Sign on to the 5250 green screen emulation interface and use: – Menus – Entry displays – List displays – Information displays
• Sign on the system with System i Navigator • Sign on the system with Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 3-31. Unit summary
OE9810.0
Notes:
3-62 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 3. Using supported interfaces
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
3-63
Instructor Guide
3-64 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 4. Using online help Estimated time 00:30
What this unit is about This unit discusses the online information available on your IBM i system, more commonly referred to as help text. We will also explain how you can access this information from a work station.
What you should be able to do After completing this unit, you should be able to: • Explain the different types of online help information displays and how to access each type from your display station • Explain how to access online help information from System i Navigator • Explain how to access online help information from Systems Director Navigator for i • List Web sites that can provide assistance for IBM i users
How You Will Check Your Progress • During the lecture, you will follow along with the instructor • During the lab exercise, you will practice your skills by using various methods to access help information. • Checkpoint questions
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Explain the different types of online help information displays and how to access each type from your display station • Explain how to access online help information from System i Navigator • Explain how to access online help information from Systems Director Navigator for i • List Web sites that can provide assistance for IBM i users
© Copyright IBM Corporation 2010
Figure 4-1. Unit objectives
OE9810.0
Notes:
4-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-3
Instructor Guide
Topic 4.1: Using display session help
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 4-2. Topic 4.1: Using display session help
5.4
OE9810.0
Notes:
4-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-5
Instructor Guide
Using online information IBM i
• Extended help information for display • Help information for a field • Information Assistant • Info Center
Help F1
Use the F1 key to access Help.
Press the Help key
© Copyright IBM Corporation 2010
Figure 4-3. Using online information
OE9810.0
Notes: The IBM i system has a very user-friendly built-in Help facility. Help is cursor-sensitive. This means that all you need do is move the cursor to a particular area, option, or field on a screen and press the Help key to receive help information about that area, option, or field. On all keyboards, you can use the F1 key to access online help. The Information Assistant menu provides many different options that you can use to learn more about system help information. For example, you can use this display to find out how you can comment on information and view the highlights of the current release.
4-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-7
Instructor Guide
Extended help information for a display IBM i
• You can get extended help information for any IBM i system display
We provide a lot of help.
• Extended help provides the following information about displays: – What the display does
F2
– How to use the display – Which function keys can be used
=
F2
Extended Help
© Copyright IBM Corporation 2010
Figure 4-4. Extended help information for a display
OE9810.0
Notes: You can get extended help information for any system display. Extended help provides the following help information about displays: • What the display does • How to use the display • Which function keys can be used To get the extended help information, you do the following: 1. Put your cursor on: • Any part of the display's title line • A blank menu option line • A completely blank line on the display • Any instruction • A blank selection line 4-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
2. Then, press the Help key. Extended help information is displayed. • If the extended help information is longer than one display, page up or page down to move through the information.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-9
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Accessing help IBM i
•
•
Help
Put your cursor on: – Any part of the display's title line F1 – A completely blank line on the display – Any instruction – Any blank selection line or menu option Press Help key.
© Copyright IBM Corporation 2010
Figure 4-5. Accessing help
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-11
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Field help: Menus IBM i
Help F1
• Help information for a particular option on the system menus can be obtained in two ways: – By placing the cursor anywhere on the line that contains the option number and description, and pressing the Help key – By typing the option number on the menu option line and pressing Help the key. © Copyright IBM Corporation 2010
Figure 4-6. Field help: Menus
OE9810.0
Notes: Menu Displays: You can receive help information about each option listed on a menu. Help information for a particular option on a system menu can be obtained in one of two ways: • By typing the option number on the menu option line and pressing the Help or F1 key • By placing the cursor anywhere on the line that contains the option number and description, and pressing the Help or F1 key
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-13
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Field help: Entry displays IBM i
Position your cursor on the field where the entry is to be made and then press the Help key.
Help F1
© Copyright IBM Corporation 2010
Figure 4-7. Field help: Entry displays
OE9810.0
Notes: Note that F2 provides extended help. This will provide detailed help information on the entire display you are currently viewing.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-15
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Field help: List displays IBM i
Help F1
• Help for fields on list displays provides information on the meaning of each column. Put the cursor in the column of information. Press the Help key to get help about that specific column.
© Copyright IBM Corporation 2010
Figure 4-8. Field help: List displays
OE9810.0
Notes: The main point to remember here is that help is cursor-sensitive.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Information Assistant IBM i
© Copyright IBM Corporation 2010
Figure 4-9. Information Assistant
OE9810.0
Notes: Option 1 will provide you with a glimpse of the types of IBM i information, such as: • IBM i printed manuals • Manuals on CD-ROM (softcopy) • Lists the IBM i home page which contains links for support, education, and so on. • Other documentation (Redbooks and related information) Contact your system administrator for more assistance.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-19
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 4.2: Using System i Navigator help
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 4-10. Topic 4.2: Using System i Navigator help
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-21
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Help IBM i
© Copyright IBM Corporation 2010
Figure 4-11. Help
OE9810.0
Notes: Click the option for Help to see the panels on the next few visuals.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Help Topics IBM i
© Copyright IBM Corporation 2010
Figure 4-12. Help Topics
OE9810.0
Notes: You can find help in System i Navigator from any dialog or window. This help appears in several different types of windows. • Most of the System i Navigator online help appears in the left pane of your help window. • Click on a How do I topic to find instructions on performing a task. • Click on a Tell me about topic to learn more information about that topic. Additionally, you can search across different functional areas to find the information that you need.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Help: What can I do with? IBM i
© Copyright IBM Corporation 2010
Figure 4-13. Help: What can I do with?
OE9810.0
Notes: To see this display scroll down from the display on the previous visual, expand Configuration and Service and click on Fixes inventory.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-27
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
IBM i Information Center IBM i
© Copyright IBM Corporation 2010
Figure 4-14. IBM i Information Center
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-29
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Click the Help button for full screen help IBM i
© Copyright IBM Corporation 2010
Figure 4-15. Click the Help button for full screen help
OE9810.0
Notes: Click the Help button to get help about the entire panel being displayed.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-31
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Click the ? for specific help IBM i
© Copyright IBM Corporation 2010
Figure 4-16. Click the ? for specific help
OE9810.0
Notes: Clicking the question mark (?) will alter the mouse which now looks like a ?, so that you can point and click to get help for a specific parameter or a specific area of the screen.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-33
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 4.3: Using Systems Director Navigator for i help
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 4-17. Topic 4.3: Using Systems Director Navigator for i help
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-35
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Learn how to use help IBM i
© Copyright IBM Corporation 2010
Figure 4-18. Learn how to use help
OE9810.0
Notes: Using the Eclipse help system: Browse topics in the Contents frame on the left. Click on a topic to have it displayed. Use the Back and Forward buttons to navigate within the history of viewed topics. Searching: To quickly locate topics on a particular subject in the documentation, enter a query in the Search field. Use the Search frame to display the Search view. You can narrow the scope of your search by selecting only the sections you are interested in. Synchronizing: After you run a search and find a topic you were looking for, click either the Refresh / Show Current Topic button or Show in Table of Contents button to match the navigation tree with the current topic. You might also find it useful to synchronize after following in-topic links. Capabilities: To show documentation about capabilities that are disabled in the application, select the Show All Topics button. When you choose to show all topics in the table of contents, the headings for documentation about any disabled activities are shown in the table of contents and also appear in search results.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-37
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
4-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Help: About console IBM i
© Copyright IBM Corporation 2010
Figure 4-19. Help: About console
OE9810.0
Notes: The information this Web page is intended to help you start using the Web-based console, IBM Systems Director Navigator for i, by providing you with tips on how to work with the interface. Scrolling to the bottom of this Web page will provide links to additional reference materials that can be helpful in using this GUI. The links are: What's new for V7R1: Read about new information for the IBM Systems Director Navigator for i topic collection. PDF file for IBM Systems Director Navigator for i: You can view and print a PDF file of IBM Systems Director Navigator for i information. Working with IBM Systems Director Navigator for i: Working with IBM Systems Director Navigator for i helps you work with the Web-enabled System i Navigator tasks, which are no longer just a set of URL-addressable tasks. However, URL-addressable access is still available on the System i Navigator tasks on the Web interface.
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-39
Instructor Guide
Related information for IBM Systems Director Navigator for i: Other information center topic collection contains information that relates to the IBM Systems Director Navigator for i topic collection. You can view or print any of the PDF files.
4-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-41
Instructor Guide
Click ? for help IBM i
© Copyright IBM Corporation 2010
Figure 4-20. Click ? for help
OE9810.0
Notes: To get help on a specific page click the question mark (?) in the upper right of the page to call up the help function. From the help page you can click on the links available to get help for specific parameters on the page.
4-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-43
Instructor Guide
Setting startup pages IBM i
© Copyright IBM Corporation 2010
Figure 4-21. Setting startup pages
OE9810.0
Notes: My Startup Pages: My Startup Pages displays all pages that will be automatically launched when logging into the console. You can select multiple pages which means multiple tabs would automatically open when you sign in. Adding Pages / Setting the Default Startup Page: To add a page to My Startup Pages, navigate to the desired page and choose "Add to My Startup Pages" from the page actions drop down menu when viewing the page. To remove a page, select the page in the list and click "Remove". To specify the page that will be displayed at login time, select "Default". Any new changes will take effect at the next login.
4-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-45
Instructor Guide
Click the twistie for pop-ups IBM i
© Copyright IBM Corporation 2010
Figure 4-22. Click the twistie for pop-ups
OE9810.0
Notes: When displaying a list of objects, the specific objects will have a twistie that can be used to display the pop up menu. In this example we are displaying the option for User jobs that was selected off of the Basic Operations page.
4-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-47
Instructor Guide
Checkpoint IBM i
1. Which of the following are not a way you can access help on a Display session? a. Using F2 b. Using F1 c. Using F4 d. Using F12
2. Help screens are only available when using the Display session interface. a. True b. False
© Copyright IBM Corporation 2010
Figure 4-23. Checkpoint
OE9810.0
Notes:
4-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions IBM i
1. Which of the following are not a way you can access help on a Display session? a. Using F2 b. Using F1 c. Using F4 d. Using F12
2. Help screens are only available when using the Display session interface. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-49
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Explain the different types of online help information displays and how to access each type from your display station • Explain how to access online help information from System i Navigator • Explain how to access online help information from Systems Director Navigator for i • List Web sites that can provide assistance for IBM i users
© Copyright IBM Corporation 2010
Figure 4-24. Unit summary
OE9810.0
Notes:
4-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 4. Using online help
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
4-51
Instructor Guide
4-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 5. Messages Estimated time 00:30
What this unit is about This unit discusses working with messages in message queues, finding additional information about your messages, displaying messages for the system operator, and displaying and changing message queues.
What you should be able to do After completing this unit, you should be able to: • Send messages to other users on the system • Display your messages • Respond to any message needing a response • Explain the concept of a message queue • Perform the tasks listed via your display session, System i Navigator or Systems Director Navigator for i
How You Will Check Your Progress • During the lecture, you will follow along with the instructor. • During the lab exercise, you will practice your skills by sending and receiving messages. • Checkpoint questions
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-1
Instructor Guide
How You Will Check Your Progress
5-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit objectives IBM i
After completing this unit, you should be able to: • Send messages to other users on the system • Display your messages • Respond to any message needing a response • Explain the concept of a message queue • Perform the tasks listed through your display session, IBM i Navigator, or Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 5-1. Unit objectives
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-3
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 5.1: Messaging concepts
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 5-2. Topic 5.1: Messaging concepts
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-5
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Types of messages IBM i
No need to reply
Informational message Job Inventory List Complete
Inquiry message ===> FRIEDA: Frieda, What in the world is part # 45920AC, " Doughnut hole size adjustment screw?? From . . . . : Norbert 10/31/XX 23:59:30
You need to reply
© Copyright IBM Corporation 2010
Figure 5-3. Types of messages
OE9810.0
Notes: Messages provide the means of communications between the system and users. In addition, you can communicate with other users of the system by sending them messages. There are two types of messages that can be sent on this system, Informational and Inquiry. • Informational messages are from the system and give you status on what the System is doing. This type of message does not require a response from you. In many cases, this type of message is system or application generated. • Inquiry messages can also supply information about the system BUT request a reply. In some cases, system functions (such as sending data to a printer) may not progress until an inquiry message receives its reply. Both of these types of messages can be sent by: • The system • An application program
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-7
Instructor Guide
• The system operator • One user to another
5-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-9
Instructor Guide
What is a message queue? IBM i
• Message queues are used to receive and hold messages.
Message Queue USER
• When a message arrives, a light, buzzer, or both may be activated on your workstation.
Message Queue WORK STATION
• When you sign on, the following are assigned to your job: – Your User message queue – Your Workstation message queue
© Copyright IBM Corporation 2010
Figure 5-4. What is a message queue?
OE9810.0
Notes: A message queue is like a mail box for messages sent to a user. There are multiple messages queues on your system: • Each workstation has a message queue with the same name as the device description name. When a workstation is connected to the system for the first time, the system automatically creates a workstation message queue. • Each user has a message queue with the same name as the user profile name. When a new user profile is created on the system, the system automatically creates a user message queue. • The system operator has a message queue named QSYSOPR that is provided as part of the OS. When the System is configured for the first time, the system operator queue is created.
5-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-11
Instructor Guide
Where do messages come from? IBM i
1. Operating System messages Press Ready or Start on the device PRT01
2. Application program messages Payroll has been processed
3. System Operator (QSYSOPR or other Q* profile) 4. Other Users Can you do the accounts receivable on Saturday? From . . . . : Norbert
10/31/XX
23:59:30
© Copyright IBM Corporation 2010
Figure 5-5. Where do messages come from?
OE9810.0
Notes: Both informational or inquiry messages on the system can come from any of the following: • The operating system will send messages when it needs to communicate with the system operator or system administrator or an end user. • An application can send messages to an end user as a way to communicate information or to request input from an operator or end user. • The system operator (QSYSOPR) or any of the other user profiles that are automatically created by the OS, those that begin with a “Q”, could send messages • Users can communicate with each other
5-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-13
Instructor Guide
Topic 5.2: Working with messages on a display screen
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 5-6. Topic 5.2: Working with messages on a display screen
5.4
OE9810.0
Notes:
5-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-15
Instructor Guide
The Messages menu IBM i
© Copyright IBM Corporation 2010
Figure 5-7. The Messages menu
OE9810.0
Notes: There are multiple menus and commands on the system that a user or operator can use to work with menus. You can use the “GO MESSAGE” command to display the menu in the visual. All of the tasks that relate to messaging can be selected off of this menu. This method requires that you remember the command within the quotes. Other alternatives available to you to work with messages are: • If you are working off of the Main help menu, you can select ‘option 1 = User tasks’ to display the User tasks menu. The user tasks menu presents options to send a message or to work with your messages. • If you are working with the Operational Assistant interface (GO ASSIST), you can select ‘option 3 = Work with messages’ or ‘option 4 = Send a message’. • As you become better acquainted with system commands, you may choose to use commands rather than the menu interface to work with messages. The commands that can be entered are: 5-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
- SNDMSG the send message command is used to send messages - SNDBRMSG the send break message command is used to send a break message to a user who is signed on to a display session - GO CMDMSG is used to display a list of all of the commands on the system that deal with messages. - When entering commands remember you can use the ‘F1 = Help’ and ‘F4 = Prompt’ to assist when using commands.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Send a Message IBM i
From the Operational Assistant menu, select option 4 to get this display. © Copyright IBM Corporation 2010
Figure 5-8. Send a Message
OE9810.0
Notes: Sending messages with the aid of Operational Assistant is easy. Select option 4 off of this menu. As you become better acquainted with system commands, you may choose to use commands to send your messages. For example: Type SNDMSG and press the F4 key to obtain a detailed screen for sending messages. Press the F10 key to see additional parameters. Remember to use the F1 Help and F4 Prompt to get assistance for the command as well as for each parameter. During this course, we will use Operational Assistant. Note to Administrators: • Use GO CMDMSG to see all message-related commands
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-19
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Receiving messages IBM i
Messages can be displayed in three ways: 1. Message line (bottom of the display): – Sent by the system or application
2. Break message display (important messages): – Sent by User or System Operator
3. Enter the command to work with messages: – DSPMSG to display messages – WRKMSG to work with messages – WRKMSGQ to work with message queues
4. Choose a menu option to work with messages: – GO ASSIST -> Option 3 – Main menu -> Option 3 -> Option 4
© Copyright IBM Corporation 2010
Figure 5-9. Receiving messages
OE9810.0
Notes: Note to Administrators: The System Operator message queue (QSYSOPR) should be monitored daily for: • Critical system messages • Messages regarding system devices • Messages regarding general operations. Any user with the appropriate authority can access this queue at any time using the DSPMSG QSYSOPR command.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-21
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Message line IBM i
• The bottom line of your display • Where the system or an application program communicates with the user • Tells you about jobs or system status, user errors, or responses that you make
F3=Exit
F5=Refresh
F12=Cancel
F16=Repeat position to
F17=Position to
User profile ROESCH changed.
Message Line © Copyright IBM Corporation 2010
Figure 5-10. Message line
OE9810.0
Notes: The system reserves the bottom line of your display as the message line. This line is one place where the system or an application program communicates with you while you are working The messages you receive on the message line tell you about jobs or system status, user errors, or responses that you make. Study Question • What type of message is “User profile ROESCH changed”? • Do you need to respond?
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Break messages IBM i
• Appear directly on your display • Have priority over any other work you are doing
Interrupted again
Break Message
• When you receive a break message: – Your current display is saved, and the break message display appears. But I will save your spot
© Copyright IBM Corporation 2010
Figure 5-11. Break messages
OE9810.0
Notes: A message sent to your message queue is usually not displayed automatically. However, the system operator or another user may choose to send you a break message; for example to inform you that the System is being taken down and to instruct you to sign off the system. A break message will interrupt a user that is signed on to a display session and automatically display the message. A break message can not be sent to a user who is only signed on to a GUI session. Note to Administrators: • Use the SNDBRKMSG command to send a break message to a workstation message queue or all workstation message queues. • Sending a break message using Operational Assist allows you to send a break message to a particular user, a list of users, or all signed on users.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Work with Messages display IBM i
• Messages in your user message queue and your workstation message queue can be viewed from the Work with Messages display. • All messages are held in your message queue until you delete them. © Copyright IBM Corporation 2010
Figure 5-12. Work with Messages display
OE9810.0
Notes: To get to the screen displayed type GO ASSIST on a command line then select Option 3 from the Operational Assistant menu. If you choose to use commands, you can also display your messages by: • Using the Display Messages (DSPMSG) command. • Using the Work with Messages (WRKMSG) command. To print the messages in a message queue use the Work with Messages (WRKMSG) command as follows: • WRKMSG MSGQ(msgqname) OUTPUT(*PRINT) Note to Administrators: • Every message has a message ID, for example, CPF1234. • There is no message manual for the system.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-27
Instructor Guide
• You can display the message text for any system message using the DSPMSGD (Display Message Description) command. - For example, to find the message text for CPF1234 type DSPMSGD CPF1234 and press the Enter key.
5-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-29
Instructor Guide
Replying to an inquiry message IBM i
From another user 5
© Copyright IBM Corporation 2010
Figure 5-13. Replying to an inquiry message
OE9810.0
Notes: 1. From the Operational Assistant menu select option 3 to work with messages. 2. Find the message that requires a reply and type a 5 under the Option column to the left of the message and press Enter. 3. Type your reply to the inquiry message then press Enter to send your reply.
5-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-31
Instructor Guide
Replying to system messages IBM i
Opt
You need to reply
Message
Messages Needing Reply
5
End of forms on the printer PRT01.
( C
H
I
PAGE
Additional Message Information Message ID . . . . . . . . . : CPA5335 Date sent. . . . . . . . . . : 11/21/XX Time 08:09:00 C -- To cancel the printer writer, 1. Press Stop only if Start and Stop are two separate keys. 2. Load the new forms. 3. Press Cancel. 4. Press Stop and Start, or press Start/Stop. 5. Type a C. H -- To hold the file, 1. Press Stop only if Start and Stop are two separate keys. Type reply below, then press Enter More. . . Reply. . . . . ___________________________________________
© Copyright IBM Corporation 2010
Figure 5-14. Replying to system messages
OE9810.0
Notes: It is common to receive inquiry system message about printers. The system needs you to take an action (such as loading paper in the printer) and will wait for you to complete the action and respond to the message before printing continues. System messages have standard reply values, one of which you must take to answer the message. For example: • Option C generally Cancels: Select this option when you want the system to stop attempting the operation that generated the message. • Option R generally Retries: Select this option after you have fixed the error condition and want the system to restart the operation that generated the message.
5-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-33
Instructor Guide
Deleting messages IBM i
• To delete a single message: – Type Option 4 (remove) on the option line preceding the message you want to delete
– Press Enter
4
To delete all messages that do not require a reply, press F16. © Copyright IBM Corporation 2010
Figure 5-15. Deleting messages
OE9810.0
Notes:
5-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-35
Instructor Guide
Message delivery modes IBM i
Delivery modes determine how you are notified of messages. • The delivery modes available are: – Notify – Break – Hold – Default
Notify Break Hold Default
© Copyright IBM Corporation 2010
Figure 5-16. Message delivery modes
OE9810.0
Notes: You can specify your message delivery mode by changing your message queue as follows: Type CHGMSGQ (change message queue) on any command line and press the F4 key to receive prompting. (Prompting tells you what parameters to use with the command.) The CHGMSGQ command has two key parameters: • The name of the message queue you are changing (usually the same as your user profile name) • The delivery mode; the way in which your messages will be delivered. The options you can specify for delivery mode are: • Notify lets you know when a message arrives on your message queue by turning on your Message Waiting light and buzzing your display station. (This is the normal way.) • Break interrupts your work by displaying messages immediately after they are received by your message queue. Even if the messages sent to your message queue are not break messages. 5-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Hold stops the system from notifying you that you have a message on your message queue. • Default answers any message requiring a reply with the default reply set up for the message. Information-only messages are ignored.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-37
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 5.3: Working with messages through System i Navigator
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 5-17. Topic 5.3: Working with messages through System i Navigator
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-39
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Work with messages IBM i
© Copyright IBM Corporation 2010
Figure 5-18. Work with messages
OE9810.0
Notes: Messages are displayed in a specific order: • Unanswered inquiry messages • Sender’s copy of messages requiring a reply • Messages not requiring a reply From this pop up menu you have options to • Reply to a message • Send a message • Delete a message
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-41
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Message: Properties IBM i
© Copyright IBM Corporation 2010
Figure 5-19. Message: Properties
OE9810.0
Notes: The Message Properties will allow you to see the entire message as well as provide the details about a message, such as how old the message is, the severity of the message (importance), and where the message originated.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-43
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Send a message IBM i
© Copyright IBM Corporation 2010
Figure 5-20. Send a message
OE9810.0
Notes: System i Navigator has several ways to send messages. Probably the easiest way to use the Message function is under Basic Operations. Right-click and select Send Message to see the display on the next page. Use the Send Message dialog to send a message to either: • One or more users, or • One or more workstation message queues. You have the additional options of requesting a reply (in which case you will send an inquiry message) and interrupting a user in an emulation session (in which case you will send a break message). Note: A break message will not be shown for a user on a GUI, for example, System i Navigator session or a Systems Director Navigator for i session.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-45
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Displaying system operator messages IBM i
© Copyright IBM Corporation 2010
Figure 5-21. Displaying system operator messages
OE9810.0
Notes: You can also use the Include function to choose a different message queue. For example use the Include function to display the messages in the system operator (QSYSOPR) message queue.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-47
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 5.4: Working with messages through Systems Director Navigator for i
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 5-22. Topic 5.4: Working with messages through Systems Director Navigator for i
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-49
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Work with messages IBM i
© Copyright IBM Corporation 2010
Figure 5-23. Work with messages
OE9810.0
Notes: When you click on messages the system will show you the messages in your message queue, in this example user OE9801 is signed on and we are now looking at the OE9801 message queue. Messages are displayed in a specific order: • Unanswered inquiry messages • Sender’s copy of messages requiring a reply • Messages not requiring a reply From this pop up menu you have options to: • Reply to a message • Send a message • Delete a message
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-51
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Message: Properties IBM i
© Copyright IBM Corporation 2010
Figure 5-24. Message: Properties
OE9810.0
Notes: The Message Properties will allow you to see the entire message as well as provide the details about a message, such as how old the message is, the severity of the message (importance), and where the message originated.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-53
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-54 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Send a message IBM i
© Copyright IBM Corporation 2010
Figure 5-25. Send a message
OE9810.0
Notes: To send a message click Send a Messages function on the Basic Operations page to see the Send Message page. Use the Send Message page to send a message to either: • One or more users, or • One or more workstation message queues. You have the additional options of requesting a reply (in which case you will send an inquiry message) and interrupting a user in an emulation session (in which case you will send a break message). Note: A break message will not be shown for a user on a GUI, for example, System i Navigator session or a Systems Director Navigator for i session.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-55
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-56 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Displaying system operator messages IBM i
© Copyright IBM Corporation 2010
Figure 5-26. Displaying system operator messages
OE9810.0
Notes: As we saw previously when you click on Messages the system will show you the messages in your message queue by default. You can use the Include function to choose a different message queue. For example use the Include function to display the messages for the system operator which will then display the messages in the QSYSOPR message queue.
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-57
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-58 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (1 of 3) IBM i
1. Each user has a mailbox (a message queue) with the same name as his or her user profile name. a. True b. False
2. Which message type has the highest priority? a. Break b. Informational c. System d. User
© Copyright IBM Corporation 2010
Figure 5-27. Checkpoint (1 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-59
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 3) IBM i
1. Each user has a mailbox (a message queue) with the same name as his or her user profile name. a. True b. False
2. Which message type has the highest priority? a. b. c. d.
Break Informational System User
© Copyright IBM Corporation 2010
Additional information — Transition statement —
5-60 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (2 of 3) IBM i
3. Which of the following is not a valid delivery mode for a message? a. b. c. d. e.
Default Notify Hold Break System
4. When using System i Navigator, the message function is found under what tab? a. b. c. d. e.
Work Management Configuration and Service Security Basic Operations Users and Groups © Copyright IBM Corporation 2010
Figure 5-28. Checkpoint (2 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-61
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 3) IBM i
3. Which of the following is not a valid delivery mode for a message? a. b. c. d. e.
Default Notify Hold Break System
4. When using System i Navigator, the message function is found under what tab? a. b. c. d. e.
Work Management Configuration and Service Security Basic Operations Users and Groups © Copyright IBM Corporation 2010
Additional information — Transition statement —
5-62 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (3 of 3) IBM i
5. Break messages can be sent to users signed on through one of the graphical interfaces. a. True b. False
6. When using System i Navigator or Systems Director Navigator for i, it is possible to display only your messages. a. True b. False
© Copyright IBM Corporation 2010
Figure 5-29. Checkpoint (3 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-63
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (3 of 3) IBM i
5. Break messages can be sent to users signed on through one of the graphical interfaces. a. True b. False
6. When using System i Navigator or Systems Director Navigator for i, it is possible to display only your messages. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
5-64 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Exercise 2: Online help and messages IBM i
Please complete Exercise 2 Online help and messages
© Copyright IBM Corporation 2010
Figure 5-30. Exercise 2: Online help and messages
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-65
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-66 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit summary IBM i
Having completed this unit, you should be able to: • Send messages to other users on the system • Display your messages • Respond to any message needing a response • Explain the concept of a message queue • Perform the tasks listed through your display session, System i Navigator, or Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 5-31. Unit summary
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Unit 5. Messages
5-67
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
5-68 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 6. Using CL commands Estimated time 00:45
What this unit is about As you gain more experience with the IBM i, you may wish to learn how to use system commands known as Command Language (CL) commands. Depending on your user profile, you may or may not have the ability to directly control the system by entering CL commands. Your productivity working with the system can be enhanced if you use CL commands since they are faster to use than menus. In this unit you will learn the basic structure of commands
What you should be able to do After completing this unit, you should be able to: • Find CL commands • Explain the basic structure of CL commands • Explain the use of command parameters • Enter commands • Use command prompting
How You Will Check Your Progress • During the lecture, you will follow along with the instructor. • During the lab exercise, you will practice your skills by using commands to create a library. • Checkpoint questions
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Find CL commands • Explain the basic structure of CL commands • Explain the use of command parameters • Enter commands • Use command prompting
© Copyright IBM Corporation 2010
Figure 6-1. Unit objectives
OE9810.0
Notes:
6-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-3
Instructor Guide
Topic 6.1: Using CL commands through a display session
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 6-2. Topic 6.1: Using CL commands through a display session
5.4
OE9810.0
Notes:
6-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-5
Instructor Guide
Where to find commands IBM i
Cursor on any command line, press
F4
© Copyright IBM Corporation 2010
Figure 6-3. Where to find commands
OE9810.0
Notes: There are several ways to find commands on the system. • Move your cursor to the command line (located at the bottom of the screen) and press the F4 key. • Type a question mark (?) on the command line and press enter. • Type GO MAJOR on the command line and press enter. The Major Command Group menu shows a list of major command groups. To the right of each menu option is the name of the menu or the command that is displayed when that particular menu option is selected. By using the GO CL command you can go directly to any of these menus. There are many such command listing menus on the IBM i. Try using these commands to increase your knowledge of CL commands. For example: • GO CMDSEC to see all of the security commands • GO CMDOUTQ to see all of the output queue commands 6-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• GO CMDJOB to see all of the job commands Note: Refer to Appendix B for a list of some of the more commonly used commands.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-7
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
CL structure IBM i
• Each CL command is made up of two parts: – Command name Parameters
– Parameters
Command Name Action
• The command names are abbreviations depicting an Action and an object:
Command Name Action
Display Library
DSPLIB
Create Physical File
CRTPF
Add Job Queue Entry
ADDJOBQE
Work with Message Queue
WRKMSGQ
Keyword and Value
© Copyright IBM Corporation 2010
Figure 6-4. CL structure
OE9810.0
Notes: Every CL command consists of an action and an item. For example: DSPLIB (display a library) • DSP is the action - Display • LIB is the item - Library Once you learn how to spell the various action and item abbreviations, you can try putting them together to learn more commands. For example, knowing how to abbreviate the action Create (CRT) and the item Library (LIB), you now know the command to Create a Library - CRTLIB. One action to remember in particular is Work with, abbreviated as WRK. The ‘Work with’ commands can provide a very efficient way to manage IBM i items.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-9
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Parameters IBM i
• Parameters allow you to be specific, or to customize what it is you want the command to do. • Each parameter is made up of a keyword and its value.
Command CRTLIB
LIB(smith)
Parameter LIB(smith)
CRTLIB Parameters
Action
Object
Keyword
Value
© Copyright IBM Corporation 2010
Figure 6-5. Parameters
OE9810.0
Notes: Parameters enable you to be specific about or customize what you want your commands to do. If you recall, the DSPLIB command enables you to display a library. One of the parameters for this command is the OUTPUT parameter. OUTPUT is the keyword for this parameter. This parameter enables you to specify whether you want the library displayed on your screen or in a spool file to be printed. It is the value of the parameter that affects how the command runs and what it does. For example: • To display a library on your screen, the value of the OUTPUT parameter is *. • To display a library in a spool file to be printed, the value of the OUTPUT parameter is *PRINT. Each parameter has a keyword associated with it. You may like to think of the keyword as the name of the parameter.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-11
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
More on values IBM i
• The values of a parameter can be: – User-defined – System-defined • System-defined values have an * ASTERISK as their first character. • The following example of the CRTLIB command shows both types of parameter values.
CRTLIB
LIB(MYLIB)
TYPE(*TEST)
User-defined
System-defined
© Copyright IBM Corporation 2010
Figure 6-6. More on values
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-13
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Required and optional parameters IBM i
• Some parameters must be specified; these are required. • Other parameters have default values; these are optional.
If you enter: CRTLIB LIB(MYLIB), then press the Enter key; it is the same as: CRTLIB LIB(MYLIB) TYPE(*PROD) TEXT(*BLANK)
Because......
TYPE(*PROD) TEXT(*BLANK)
... are the default values for those optional parameters
© Copyright IBM Corporation 2010
Figure 6-7. Required and optional parameters
OE9810.0
Notes: The IBM i highlights required parameters and issues a message if required parameters are omitted.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-15
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Where to enter a CL command IBM i
• Menu Command Line – Most menus have a line reserved for entering commands Selection or command ===> ________________________________ CRTLIB LIB(MYLIB) ___________________________________________________________________________________ F3=Exit F4=Prompt F9=Retrieve F12=Cancel F13=Information Assistant F23=Set initial menu
F4
Provides assistance with parameters
F9
Retrieve previously entered commands
Help F1
Do not forget to use Help; it makes life much easier. © Copyright IBM Corporation 2010
Figure 6-8. Where to enter a CL command
OE9810.0
Notes: Most menus have a command line as part of the menu and is located at the bottom of the screen. This command line can be used to enter CL commands. If you know the command you wish to use, simply enter it on this line and press F4 to obtain command prompting. The system will present you with a display screen showing possible parameters for the command. If there are any parameters with which you are not familiar, move the cursor to that parameter. Then press either the Help (F1) key or the prompt (F4) key or both. • Pressing the Help key will provide you with an explanation of what the parameter does. • Pressing the F4 key will list the possible values, including system-defined values that can be entered for the parameter. If you are entering many commands over and over again, you may find the F9 key a real time saver. Pressing F9 will retrieve the command previously issued. In fact, by pressing F9 many times, you can retrieve all CL commands entered since you signed on.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
The Command Entry display IBM i
This display shows you all the commands you have entered from the time you have signed on. On any command line type CALL QCMD to get this display.
© Copyright IBM Corporation 2010
Figure 6-9. The Command Entry display
OE9810.0
Notes: The ‘Command Entry’ display: • Is specifically designed for entering commands • Allows you to: - Enter commands efficiently. - View previously entered commands and retrieve them from the list. • To retrieve a specific command move the cursor to the desired command and press F9. - Find all messages that have been issued for your job. The greatest advantage to the Command Entry screen is that you can view all the commands you have entered since you last signed on and retrieve a specific command directly.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-19
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Entering commands using prompting IBM i
• No need to remember F4
– All the command keywords (name of a parameter) – The values allowed for a parameter – The sequence of the parameters
• Each command has an entry display to assist you To get prompting for the Creating Library command: • Type CRTLIB on the command line, then press F4. © Copyright IBM Corporation 2010
Figure 6-10. Entering commands using prompting
OE9810.0
Notes: As your experience level improves, you may not need to use command prompting as often. However, even the most experienced IBM i users often rely on prompting. Why try to remember long commands and parameter values when the system will do that for you? As stated earlier, if you are not sure which parameters to use, just type the CL command for example, DSPLIB on the command line and press the F4 key. • The system will present you with a display screen showing possible parameters for the command. • If there are any parameters with which you are not familiar, move the cursor to that parameter. Now you can press either the Help key or the F4 key or both. - Pressing the Help key will provide you with an explanation of what the parameter does. - Pressing the F4 key will list the possible values, including system-defined values, that can be entered for the parameter.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-21
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
CRTLIB command prompting IBM i
Your choice
Default values • By default descriptions are shown • To see keywords press F11 • To find out the difference between *PROD and *TEST, place cursor on the ‘library type’ parameter and press the Help key.
Help F1
© Copyright IBM Corporation 2010
Figure 6-11. CRTLIB command prompting
OE9810.0
Notes: To get to this screen, type CRTLIB at a command line and then press the F4 key. The advantages of letting the IBM i help you in this way include: • You do not have to remember all the parameters. • The initial required parameters are displayed and highlighted. • Press F10, Additional parameters, to see any additional parameters for this CL command. • The default parameter values are provided.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Entering commands in free format IBM i
• Prompting may not be necessary for commands that are used often • The correct form is: – Space between parameters – Parentheses around values (user or system defined) – No space between a parameter and its value • No need to enter parameters with default values CRTLIB
LIB(MYLIB) TYPE(*TEST)
© Copyright IBM Corporation 2010
Figure 6-12. Entering commands in free format
OE9810.0
Notes: As you use certain commands and parameters over and over again, you begin to remember the order and values for parameters. For these commands, you will find it more efficient to simply type the command and parameters at a command line and press Enter.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Keywords are optional IBM i
• You can specify the value for each parameter without typing in the keywords, as long as you respect the order of the parameters.
CRTLIB CRTLIB CRTLIB
LIB(MYLIB) TYPE(*TEST) TYPE(*TEST) LIB(MYLIB) mylib *test
CRTLIB
*test mylib
F4
Are all Valid
This is not Valid
It is always best to start with prompting. © Copyright IBM Corporation 2010
Figure 6-13. Keywords are optional
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-27
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 6.2: Using CL commands through System i Navigator
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 6-14. Topic 6.2: Using CL commands through System i Navigator
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-29
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Verify Management Central server IBM i
© Copyright IBM Corporation 2010
Figure 6-15. Verify Management Central server
OE9810.0
Notes: When running commands via System i Navigator, the first step is to verify that the Management Central server is set correctly. Commands will be submitted to run off of the management central server. So you will need to verify that this value is set to the correct system and that you have a valid user id and password on that system. Check with your system administrator if your current value is set to a system other than the system on which the command will be run. The steps to set the management central server are: • Open System i Navigator. • Highlight and right click Management Central (the top branch in the left pane) • On the pop up menu select and click Change central system • Click the down arrow and select the system to be set as your management central server system These steps will prepare the management central server. Continue with the steps on the next visual to actually run a CL command. © Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-31
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Running a command IBM i
© Copyright IBM Corporation 2010
Figure 6-16. Running a command
OE9810.0
Notes: The steps to run a command with System i Navigator are: • Open System i Navigator. • Sign on to your system. • Right-click your system. • Choose Run command from the pop-up menu. • You may be prompted: - To sign on to the central server; if so enter a valid user id and password. - With the informational window displayed in the visual, if so click OK
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-33
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Entering a command IBM i
© Copyright IBM Corporation 2010
Figure 6-17. Entering a command
OE9810.0
Notes: Enter the command in the input field. • If you know the format, you can type in the full CL command with all of the parameters and user values. • But if you do not know the format for the command, then you can type in the CL command then press the Prompt button to call up the panel on the next page At this point you will see the GUI version of prompted CL command screen. Fill in the required information. Remember that you are allowed to use both help and prompting for each parameter in question. Once all of the parameters have been filled in, click OK to display the panel on the next visual.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-35
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Submitting the command IBM i
1
2
3
© Copyright IBM Corporation 2010
Figure 6-18. Submitting the command
OE9810.0
Notes: Once the CL command and all of it’s parameters are specified: • Click OK to run immediately or you can schedule a date and time for the command to run. • If you click OK, you will see the pop-up message panel in the visual (# 1). Review the information on this panel and click OK. • This will open a status window (# 2) that will show the status of your job, initially it will say running. • Once the job has completed you will see the status change (# 3). • When your job has completed then you can close the status window.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-37
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Task Activity: Run Command IBM i
© Copyright IBM Corporation 2010
Figure 6-19. Task Activity: Run Command
OE9810.0
Notes: You can also check the status of your job by: 1. Expanding Management Central, you may be prompted for user id and password. 2. Expand Task activity 3. Click Commands to see information for your command in the right pane 4. Once your command has completed successfully you can right click and Delete this entry. Notice the other options that are available on the pop up menu.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-39
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Finding a command (1 of 2) IBM i
© Copyright IBM Corporation 2010
Figure 6-20. Finding a command (1 of 2)
OE9810.0
Notes: If you are not sure of the spelling for a command, prompting is available. In this example the user has keyed in DSP*, then clicked Prompt. From the pop-up panel you can select the command you want to run, and click OK button.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-41
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Finding a command (2 of 2) IBM i
© Copyright IBM Corporation 2010
Figure 6-21. Finding a command (2 of 2)
OE9810.0
Notes: Another function that is available through the System i Navigator is the ability to recall commands that have previously been entered from your PC. Note that you can specify how much history is collected on your PC, the default is to save the past 20 commands.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-43
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 6.3: Using CL commands through Systems Director Navigator for i
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 6-22. Topic 6.3: Using CL commands through Systems Director Navigator for i
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-45
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Running a command IBM i
© Copyright IBM Corporation 2010
Figure 6-23. Running a command
OE9810.0
Notes: The steps to run a command with Systems Director Navigator for i are: • Open a Web browser and start a connection to Systems Director Navigator for i • Sign on to your system. • Open the System page • Choose Run command to see the Web page on the next page in the student guide
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-47
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Enter command: Prompt IBM i
© Copyright IBM Corporation 2010
Figure 6-24. Enter command: Prompt
OE9810.0
Notes: Enter the command in the input field. • If you know the format, you can type in the full CL command with all of the parameters and user values. • If you do not know the format for the command, then you can type in the CL command then press Prompt button to call up the Web page in the lower right corner At this point you will see the GUI version of prompted CL command screen. Fill in the required information. Once all of the parameters have been filled in, click OK to display the panel on the next page.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-49
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Entering a command IBM i
© Copyright IBM Corporation 2010
Figure 6-25. Entering a command
OE9810.0
Notes: Once the CL command is ready to be run, click Run Command. Once the command has been processed you will see the message displayed on the Web page (see the screen capture in the lower right). Close this page when you are done processing your command.
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-51
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (1 of 3) IBM i
1. What is the easiest way to find a command you need? a. Press F1 on any screen. b. Press F4 with the cursor on the command line. c. Press F1 with the cursor on the command line. d. Press F4 with the cursor in any position on the screen.
2. Some CL commands have default values for parameter entries. a. True b. False
© Copyright IBM Corporation 2010
Figure 6-26. Checkpoint (1 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-53
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 3) IBM i
1. What is the easiest way to find a command you need? a. Press F1 on any screen. b. Press F4 with the cursor on the command line. c. Press F1 with the cursor on the command line. d. Press F4 with the cursor in any position on the screen. 2. Some CL commands have default values for parameter entries. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
6-54 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (2 of 3) IBM i
3. Match the purpose of the function key with the correct key. F1
1. Retrieve commands
F4
2. Help
F9
3. Provides assistance with commands
a. F1 = 2, F4 = 1, F9 = 3 b. F1 = 2, F4 = 3, F9 = 1 c. F1 = 3, F4 = 2, F9 = 1 d. F1 = 1, F4 = 3, F9 = 2
© Copyright IBM Corporation 2010
Figure 6-27. Checkpoint (2 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-55
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 3) IBM i
3. Match the purpose of the function key with the correct key. F1
1. Retrieve commands
F4
2. Help
F9
3. Provides assistance with commands
a. F1 = 2, F4 = 1, F9 = 3 b. F1 = 2, F4 = 3, F9 = 1 c. F1 = 3, F4 = 2, F9 = 1 d. F1 = 1, F4 = 3, F9 = 2
© Copyright IBM Corporation 2010
Additional information — Transition statement —
6-56 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (3 of 3) IBM i
4. When using F4 for command assistance, all values are displayed, including default values. a. True b. False
5. When using System i Navigator to run a command, you can use F4 to display all the parameters. a. True b. False
© Copyright IBM Corporation 2010
Figure 6-28. Checkpoint (3 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-57
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (3 of 3) IBM i
4. When using F4 for command assistance, all values are displayed, including default values. a. True b. False
5. When using System i Navigator to run a command, you can use F4 to display all the parameters. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
6-58 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Exercise 3: Command entry IBM i
Please complete Exercise 3 Command entry
© Copyright IBM Corporation 2010
Figure 6-29. Exercise 3: Command entry
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-59
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-60 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit summary IBM i
Having completed this unit, you should be able to: • Find CL commands • Explain the basic structure of CL commands • Explain the use of command parameters • Enter commands • Use command prompting
© Copyright IBM Corporation 2010
Figure 6-30. Unit summary
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 6. Using CL commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
6-61
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
6-62 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 7. Managing objects Estimated time 00:30
What this unit is about In this unit, we will see how objects are stored on the IBM i. We will also explain what a library is and how the library list is used to locate objects on the system.
What you should be able to do After completing this unit, you should be able to: • Explain what is considered an object • Explain the purpose served by a Library • Explain how the system locates objects • Explain the difference between a simple name and a fully qualified name • Explain the function served by a library list • Explain how library lists are created • Describe the different ways to locate objects on the system
How You Will Check Your Progress • During the lecture, you will follow along with the instructor. • During the lab exercise, you will practice your skills by using commands to locate objects. • Checkpoint questions.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Explain what is considered an object • Explain the purpose served by a library • Explain how the system locates objects • Explain the difference between a simple name and a fully qualified name • Explain the function served by a library list • Explain how library lists are created • Describe the different ways to locate objects on the system
© Copyright IBM Corporation 2010
Figure 7-1. Unit objectives
OE9810.0
Notes:
7-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-3
Instructor Guide
Topic 7.1: Managing objects through a display session
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 7-2. Topic 7.1:Managing objects through a display session
5.4
OE9810.0
Notes:
7-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-5
Instructor Guide
What are objects? IBM i
• Objects are named units that occupy space in storage upon which operations can be performed. Mary Smith User profile
• Examples: – File – Library
Message queues
Tape file
– Program – Command – Queue
Library MYLIB with objects books
Program
© Copyright IBM Corporation 2010
Figure 7-3. What are objects?
OE9810.0
Notes: Anything that lives in the System is a object. Some examples of objects that live in the system are; files, libraries, programs, commands, message queues, and so forth. You may like to think of an object as a box with a packing slip. There are contents within the box as well as a packing slip that describes the box. Objects contain both data and attributes, which describe the object. Object attributes include the name, type, size, creation date of the object, and the name of user profile who created the object. Security attributes also exist identifying which user profiles can access the object and what type of access these users have to that object. IBM i security makes it so that not all users can use every object on the IBM i. Note to Administrators: • The command used to display an object's attributes is DSPOBJD.
7-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-7
Instructor Guide
Libraries IBM i
• A library is an object used to group related objects and to find objects by name.
MYLIB LIBRARY
• Libraries are used to organize:
Prog1
– For security – For backup Tape file
– By applications – By object type
File 1
PayDay Mary Smith User profile
– By use: • Production versus
Message queues
• Test
MSGQ1
© Copyright IBM Corporation 2010
Figure 7-4. Libraries
OE9810.0
Notes: A library is a directory to objects. In fact, the library provides the address of a given object. The system cannot locate any object unless it uses the library to find the object’s address first. You may like to think of a library like a directory on PC file systems. There is one major difference; unlike PC directories, the system does not allow you to create libraries within libraries. The security officer or the system administrator will define the list of libraries you can access. Objects are grouped together in libraries according to security requirements, processing requirements, end user requirements, and so forth. Note to Administrators: • In addition to the traditional IBM i library and object file system, IBM i also supports what is essentially a PC directory and file system. This enables the IBM i to be used as a PC file server, a www server, a Lotus Domino server, and other applications. These PC 7-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
directories combined with the IBM i library and object file system and other file systems make up what is called the Integrated File System or IFS. • Perhaps the easiest way to see all of the IFS is to use IBM i Access for Windows on a PC client. This client software will show all directories in the IBM i IFS using Windows Explorer. Using this client software, new IFS PC directories can be created and files from your PC can be easily uploaded to and accessed from the IBM i disk. • CL commands to work with IFS directories include the MKDIR command which creates a new IFS directory and the WRKLNK command which shows all directories in the IFS.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-9
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Simple name versus qualified name IBM i
Simple name
PAYDAY
Qualified name
PAYLIB/PAYDAY
PayLIB
Library Name
Object Name
© Copyright IBM Corporation 2010
Figure 7-5. Simple name versus qualified name
OE9810.0
Notes: The qualified object name is simply the object name qualified or further described by its library name. When referring to an object's qualified object name, it is written as follows: • Library Name/Object Name Note that it is possible to have objects on the system with the same name and type. In order to use a specific object, you need to identify its library.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-11
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Library list IBM i
QSYS QSYS2
IBM-supplied
QHLPSYS QUSRSYS
+ MARYLIB +
Mary Smith Programmer
MARYLIB *CURLIB
QGPL
*USRLIBL
QTEMP
© Copyright IBM Corporation 2010
Figure 7-6. Library list
OE9810.0
Notes: When you sign on the system, you will have a list of libraries called a library list associated with your active session, properly known as your interactive job. The library list has a system portion and a user portion. Use the DSPLIBL command to see your library list. Your system administrator can tailor your library list to include libraries that you need to access regularly. Note to Administrators: • The system portion of the library list is specified in the system value QSYSLIBL. It is unlikely that you will need to change this value but if you do need to make a change then you will use the CHGSYSVAL QSYSLIBL command. • The default user portion of the library list is specified in system value QUSRLIBL but can be individually specified for each user. This is done using an object called a job description. - Every new job obtains job attributes including the library list from a job description. - Job descriptions are created with the CRTJOBD command. © Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-13
Instructor Guide
- For interactive jobs you specify the job description you wish to use in the user profile. - For batch jobs the job description is specified in the SBMJOB command. - To see the job descriptions currently being used by your jobs use the WRKACTJOB command, then choose the option to work with the job's definition attributes. • A user's current library is set in the user profile. This library will be used to store any object created by the user unless the user specifies a specific library when they are creating an object.
7-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-15
Instructor Guide
Finding an object IBM i
Library List
QSYS QSYS2 QHLPSYS QUSRSYS MARYLIB QGPL QTEMP PayLIB NEWLIB
MARYLIB Message Queues
PAYLIB
CALL BOOKPROG CALL PAYLIB/BOOKPROG © Copyright IBM Corporation 2010
Figure 7-7. Finding an object
OE9810.0
Notes: The library list will be used to find an object when you refer to an object on the system without referring to that object's library name,. The list will be searched from the top to the bottom. The first library within that list that is found to contain the object will be used to provide the address of the object. In this example: • If you enter CALL BOOKPROG: - The system will stop searching when it finds a program named BOOKPROG that exists in library MARYLIB. - BOOKPROG in MARYLIB will be the program that is called. • But, if you enter CALL PAYLIB/BOOKPROG the system will use program BOOKPROG in PAYLIB since this library name was explicitly specified. Hence, the library list is simply a convenience. You can avoid specifying library names when referring to objects as long as the library containing the object is in your library list.
7-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
You can always access any object in any library, assuming you have the correct security authorization, by explicitly specifying the library name.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Locating an object IBM i
To get to this screen, enter WRKOBJ +
F4
© Copyright IBM Corporation 2010
Figure 7-8. Locating an object
OE9810.0
Notes: Use the WRKOBJ command to find an object on the system. Simply enter the object name you wish to find. If you wish to search all libraries on the system specify *ALL for the Library parameter. Let’s try to find an object called QDFTJOBD, which is a job description type of object. How many did you find? _____________ In what library was this object located? _______________________________ What is the object type? ________________________
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-19
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 7.2: Managing objects through System i Navigator
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 7-9. Topic 7.2: Managing objects through System i Navigator
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-21
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
File Systems: Integrated File System IBM i
© Copyright IBM Corporation 2010
Figure 7-10. File Systems: Integrated File System
OE9810.0
Notes: File Systems are a part of IBM i that supports stream input and output and storage management similar to the personal computer and UNIX operating systems. They also provide a similar hierarchical directory structure. Click File Systems to display a list of all file systems to which you are authorized. You can access IBM i objects by specifying the path through the directories to the object.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Integrated File System: QSYS.LIB IBM i
© Copyright IBM Corporation 2010
Figure 7-11. Integrated File System: QSYS.LIB
OE9810.0
Notes: To display the screen in the upper left part of the visual: 1. Expand File systems 2. Expands IFS 3. Expand QSYS.LIB file system to see a list of all of the libraries (both IBM and User libraries) on your system 4. Click QSYS.LIB file system to see the information in the right pane. - The default is to show all objects stored in the QSYS library that are type *.LIB - You can use the INCLUDE function to show a list of other types of objects that are stored in the QSYS library When you click the plus sign (+) to expand a library (in this example OE98V10LIB, in the lower right screen capture) left frame, it displays a list of files in that library. But when you click the library itself, a complete list of all the object in the libraries displays in the right frame. © Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Menu options for different object types IBM i
© Copyright IBM Corporation 2010
Figure 7-12. Menu options for different object types
OE9810.0
Notes: Notice that when you right-click an object, the options available on the pop-up menu vary based on the type of object.
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-27
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 7.3: Managing objects through Systems Director Navigator for i
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 7-13. Topic 7.3: Managing objects through Systems Director Navigator for i
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-29
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
File systems: Integrated File System QSYS.LIB IBM i
© Copyright IBM Corporation 2010
Figure 7-14. File systems: Integrated File System QSYS.LIB
OE9810.0
Notes: File Systems are a part of IBM i that supports stream input and output and storage management similar to the personal computer and UNIX operating systems. They also provide a similar hierarchical directory structure. The steps to manage objects with Systems Director Navigator for i are: 1. Open a Web browser and start a connection to Systems Director Navigator for i 2. Sign on to your system. 3. Open the File systems page 4. Choose Integrated file systems to see the Web page in the lower right corner 5. Choose the file system you want to explore; in this example QSYS.LIB 6. Click the twistie to see the pop up menu 7. Choose Open on the pop up menu to see the visual on the next page
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-31
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Find and open your library IBM i
© Copyright IBM Corporation 2010
Figure 7-15. Find and open your library
OE9810.0
Notes: 1. Choosing the path in the previous visual shows the panel on this page; you will see a list of the libraries in the QSYS library 2. Page down until you find your schema, in this example OE98V10LIB 3. Click the twistie to see the pop up menu 4. Click Open on the pop up menu to see the next visual
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-33
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Menu options for different object types IBM i
© Copyright IBM Corporation 2010
Figure 7-16. Menu options for different object types
OE9810.0
Notes: 1. Choosing the path in the previous visual shows the panel on this page. 2. You will see a complete list of all the objects in the schema. 3. Notice that when you click the twistie for an object, the options available on the pop-up menu vary, based on the type of object. For example: a. An object of type program, in the upper left screen capture, versus b. An object of type file, in the lower right screen capture 4. You can either click Close button to close this page or click the ‘X’ on the tab to close this page
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-35
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (1 of 3) IBM i
1. Which of the following is not an object on the IBM i? a. Files b. Programs c. Commands d. Record e. Libraries
2. Which of the following is a valid use of a library? a. A library is an object used to store applications. b. A library is an object used to store production data. c. A library is an object used to store security information. d. All the above are valid use of a library. e. None of the above is a valid use of a library. © Copyright IBM Corporation 2010
Figure 7-17. Checkpoint (1 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-37
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 3) IBM i
1. Which of the following is not an object on the IBM i? a. Files b. Programs c. Commands d. Record e. Libraries
2. Which of the following is a valid use of a library? a. A library is an object used to store applications. b. A library is an object used to store production data. c. A library is an object used to store security information. d. All the above are valid use of a library. e. None of the above is a valid use of a library. © Copyright IBM Corporation 2010
Additional information — Transition statement —
7-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (2 of 3) IBM i
3. Each user can have a list of libraries assigned; this list can be customized for each user. a. True b. False
4. Which of the following is a correct statement regarding a library list? a. The library list is only used to find application programs. b. The library list is searched from the top to the bottom when searching for an object. c. A library list cannot be configured for a specific user. d. Using the command DSPLIBL only shows IBM-supplied libraries.
© Copyright IBM Corporation 2010
Figure 7-18. Checkpoint (2 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-39
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 3) IBM i
3. Each user can have a list of libraries assigned; this list can be customized for each user. a. True b. False
4. Which of the following is a correct statement regarding a library list? a. The library list is only used to find application programs. b. The library list is searched from the top to the bottom when searching for an object. c. A library list cannot be configured for a specific user. d. Using the command DSPLIBL only shows IBM-supplied libraries.
© Copyright IBM Corporation 2010
Additional information — Transition statement —
7-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Checkpoint (3 of 3) IBM i
5. When using the GUI, you can use the IFS as a way to find objects on the system. a. True b. False
© Copyright IBM Corporation 2010
Figure 7-19. Checkpoint (3 of 3)
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-41
Instructor Guide
Instructor notes: Purpose — Details —
Checkpoint solutions (3 of 3) IBM i
5. When using the GUI, you can use the IFS as a way to find objects on the system. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
7-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Exercise 4: Object management IBM i
Please complete Exercise 4 Object management
© Copyright IBM Corporation 2010
Figure 7-20. Exercise 4: Object management
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-43
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit summary IBM i
Having completed this unit, you should be able to explain the following: • Explain what is considered an object • Explain the purpose served by a library • Explain how the system locates objects • Explain the difference between a simple name and a fully qualified name • Explain the function served by a library list • Explain how library lists are created • Describe the different ways to locate objects on the system
© Copyright IBM Corporation 2010
Figure 7-21. Unit summary
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 7. Managing objects
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
7-45
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
7-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 8. Managing your work Estimated time 00:30
What this unit is about When you sign on to the system and run programs, you are performing work on the system. In this unit you learn will learn the character that the system keeps track of the work it must perform by dividing that work into individual units known as jobs. In this unit you will learn that there are interactive jobs and batch jobs. Many of your application menu options start new batch jobs on the system. In this unit you will learn how to monitor the jobs that are run on the system and ensure that they complete as desired. You will also learn how printing is managed on the system and how to manage your printed reports to ensure that they print on the desired printer.
What you should be able to do After completing this unit, you should be able to: • List the types of jobs that can run on the system • Describe the difference between a batch and an interactive job • Identify the stages of a batch job • Execute the command to display your jobs • Execute the command to display all active jobs • Explain how to control jobs on the system • Execute the command to view your spool files • Control printer output on the system • Perform all of these tasks through a display session as well as using System i Navigator and Systems Director Navigator for i
How You Will Check Your Progress • During the lecture, you will follow along with the instructor.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-1
Instructor Guide
• During the lab exercise, you will practice your skills by using menus and commands to submit a batch job and monitor it as it goes through the various job stages. • Checkpoint questions.
8-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit objectives IBM i
After completing this unit, you should be able to: • List the types of jobs that can run on the system • Describe the difference between a batch and an interactive job • Identify the stages of a batch job • Execute the command to display your jobs • Execute the command to display all active jobs • Explain how to control jobs on the system • Execute the command to view your spool files • Control printer output on the system • Perform all of these tasks through a display session as well as using System i Navigator and Systems Director Navigator for i
© Copyright IBM Corporation 2010
Figure 8-1. Unit objectives
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-3
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 8.1: Managing your work through a display session
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 8-2. Topic 8.1: Managing your work through a display session
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-5
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Types of work on the system IBM i
Interactive processing: – Requires continual two-way communication between the user and the system. – The system occasionally requires information from the user. – Both the user and the display station are free to do other work
Batch processing: – Requires that information is sent for processing. – No further communication is required once processing is started – Both the user and the display station are free to do other work
Any work done by the System is referred to as a job. © Copyright IBM Corporation 2010
Figure 8-3. Types of work on the system
OE9810.0
Notes: Interactive processing occurs when you sign on the IBM i and then use commands and menus to interact with the system. An example of batch processing is perhaps a weekly or monthly report you request from one of your application menus. Once you have made the request, you and your display station are free to do other things. Your request is sent to another part of the system, and here your report is generated with no further input from you.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-7
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Batch jobs IBM i
2) John's request is placed on a JOBQ.
4) Johns OUTQ has the data to be printed, known as Spool files.
Batch processing 3) Job is active.
John's Spool Files
Cans writer
1) User John starts a batch job called PAYDAY.
CANS
5) Cans Writer must be started before John’s spool files will print. STRPRTWTR
John's printer © Copyright IBM Corporation 2010
Figure 8-4. Batch jobs
OE9810.0
Notes: Understanding the various stages that a batch job follows as it progresses from initial submission to final completion can help you keep track of your work and ensure that it completes as desired. The diagram displayed is a humorous representation of how batch jobs flow through the system. It identifies the many stages that a batch job follows. 1. The user, John, selects an option from an application menu or runs the SBMJOB command which submits a request to run program PAYDAY in batch mode. 2. First, John's request is placed on a Job Queue where it may have to wait it’s turn, along with other jobs, before being executed. Queuing jobs such like this avoids overloading system resources with too much work at one time. Jobs are taken off the queue, usually one at a time, to be executed. 3. When John's job is taken off the queue, it will become active. Active jobs run under the control of a subsystem which in turn controls the job's performance attributes. 4. When execution of the job is complete, John's job will likely generate some output which will be in the form of spool files. Spool files created by jobs are placed on an © Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-9
Instructor Guide
output queue. These spool files will wait in the output queue along with other print jobs, until they are sent to a print device for printing. 5. A process known as a spool writer will eventually take John's spool file off of the output queue and send it to a printer to be printed. Note to Administrators: • When the System is IPLed, many subsystems are started by default and a ready-to-use interactive and batch processing environment is enabled. - The QINTER subsystem is started and sends a sign-on screen to all active workstations thereby enabling interactive processing. - The QBATCH subsystem is started and monitors IBM-supplied job queue QBATCH (the default job queue used by the SBMJOB command) for new jobs. The QBATCH subsystem takes jobs off of the job queue QBATCH, one at a time and executes them. • Because interactive and batch jobs have different processing characteristics, there is a different subsystem for the different types of jobs. • It is the subsystem description that dictates the performance values such as run priority, timeslice, and memory allocation. • You can create your own subsystem descriptions thereby tailoring the job environment to meet your own processing requirements as necessary.
8-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-11
Instructor Guide
Work with User Jobs IBM i
Screen displayed with the command WRKUSRJOB (Work user job)
© Copyright IBM Corporation 2010
Figure 8-5. Work with User Jobs
OE9810.0
Notes: This screen is displayed by the work with user’s jobs command WRKUSRJOB. From this display, you can determine is the current stage of your jobs. The various stages for your batch jobs are: • Waiting to run: The job is still waiting on the job queue. • Running: The job has been taken off the job queue and is currently active in a subsystem. • Output queue: The job has completed execution and has spool files on an output queue waiting to print. You can also determine if a job is not progressing through the various job stages. There are different options (actions) that you can take for your job. These options are described on the next visual.
8-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-13
Instructor Guide
Work with user job options IBM i
Allow you to:
Batch processing
3 = Hold
• Temporarily stop a job from running.
4 = Delete (End)
• End or cancel a job on the system.
6 = Release
• Release a job that has been held.
7 = Display message
• Display and reply to any messages for your job that may be pending.
8 = Work spooled files
• Work with any output (reports) created by a particular job.
John's Spool Files
Output Queue © Copyright IBM Corporation 2010
Figure 8-6. Work with user job options
OE9810.0
Notes: Some of these options are pretty straight forward and do not require a lot of explanation while other options may not be as straight forward. Remember to use the F1 = Help key in the options column if you are not sure what an option does for you. • Option 3: You can place your job on hold • Option 6: Use this option to release a job that is on hold • Option 7: Use this option to reply to any messages that may be pending for a job • Option 4: Use this option to end or cancel you job. Be sure that you understand the consequences of canceling a job. It is recommended that you check with your system administrator before a job is canceled. • Option 5: Use this option to display all of the characteristic for your job. Selecting this option will present you with a menu that has many different options to tell you everything about your job. • Option 2: Use this option to make a change to any of the characteristics for your job
8-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Option 8: Use this option to work with any spooled files that were generated by your job Note to Administrators: • Users with *JOBCTL special authority assigned to their user profile can control all user jobs on the system. • The CL commands used to monitor and control all user jobs include: - WRKJOBQ: Control batch jobs on a particular job queue. - WRKACTJOB: Control all types of jobs that are currently active. - WRKUSRJOB: Provides many parameters that you can use to obtain various job views. For example, using this command, you can choose to work with only active interactive jobs or perhaps instead only batch jobs submitted by a particular user currently on a job queue. - Remember to use F4, prompting, with these commands to fill in the parameters and control what information will be displayed
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-15
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Controlling Printer Output IBM i
Select option 1 from the Operational Assistant menu.
© Copyright IBM Corporation 2010
Figure 8-7. Controlling Printer Output
OE9810.0
Notes: There are two ways to see the display in the visual: • Select option 1 from the Operational Assistant menu to see the Work with Printer Output display. • Enter the work with spool files command WRKSPLF (covered on the next page in student guide) This display shows your printer output, known as spool files, and their status. Your spool files are located in an Output Queues. If you recall, it is the Spool Writer process that takes spool files from an output queue and sends them to a print device for printing. It is possible that your spool files are on an output queue that is not currently associated with a printer, that is a spool writer has not been started for that output queue. If this is the case, your spool file will have a status 'Not assigned to a printer' and you must select Option 2 to change your spool file and move it to a queue for which an active spool writer is started. Your spooling environment is one of the things that is set up by your system administrator. Ask your system administrator or system operator which output queues are associated with © Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-17
Instructor Guide
which printers and select Option 2 to change your spool files to the appropriate output queues. From this display, you can press the F22 key to check the status of the spool writers on your system and start spool writers if required. Usually, the function of starting and controlling spool writers, however, is the task of the system operator. Note to Administrators: • Users with *JOBCTL special authority can control all users' spooled output as well as spool writers. • Commands to monitor and control the printing environment include: - WRKSPLF: The easiest way to find your spool files - WRKOUTQ: Monitor and control spool files on a particular output queue - WRKJOB, WRKUSRJOB, and WRKACTJOB: Find and control spool files on a job-by-job basis - STRPRTWTR: Start the spool writer for a particular print device and a particular output queue - WRKWTR: Monitor and control all spool writers; from here, you can also start or stop a writer
8-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-19
Instructor Guide
Controlling printer output with WRKSPLF IBM i
Enter WRKSPLF command and select Intermediate Assistance Level (F21).
© Copyright IBM Corporation 2010
Figure 8-8. Controlling printer output with WRKSPLF
OE9810.0
Notes: The WRKSPLF command can be used in place of Operational Assistant Option 1. If you have proper authority to this command, you will find it quite useful for viewing and printing just YOUR spool file. As indicated before, the system can be running many jobs at the same time. The WRKSPLF command looks only at your jobs (so long as you stay signed on), thus it might be quicker to use than the options off of the Operational Assistant menus. Selecting Option 4 from the Work with Job display will find your spool files, and from here, you have much the same control as the Operational Assistant menu can provide.
8-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-21
Instructor Guide
Change a spool file IBM i
© Copyright IBM Corporation 2010
Figure 8-9. Change a spool file
OE9810.0
Notes: These are two of three screens (the user values) that are presented when you select the option for Change on the previous page. These are parameters you will see via all three of the interfaces discussed in this class. Some of the parameters you might be interested in changing are: • Printer (DEV): Specifies the printer that is used to print the file. • Copies (COPIES): Specifies, for spooled output only, the number of copies of the output being printed. Press the F10, additional parameters, and page down to see: • Output queue (OUTQ): Specifies the output queue to which the spooled file is moved. This parameter is used only when the specified file is moved from one output queue to another. • Expiration date for file (EXPDATE): Specifies the expiration date for the spooled file. The spooled file will expire at 23:59:59, system local time on the date specified.
8-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Days until file expires (DAYS): Specifies the number of days to keep the spooled file. Notice that there are other parameters on these three screens that you can also change. If any of those are of interest place the cursor on that line and press the F1, Help key, to see an explanation of what these other parameters can do for you.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-23
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Topic 8.2: Managing work through System i Navigator
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 8-10. Topic 8.2: Managing work through System i Navigator
5.4
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Basic Operations: Jobs IBM i
© Copyright IBM Corporation 2010
Figure 8-11. Basic Operations: Jobs
OE9810.0
Notes: Selecting Basic Operations > Jobs will display the jobs for the current user. This is equivalent to running the Work with user jobs (WRKUSRJOB) command. When you right click on your job, notice the actions that you are allowed to take against your job.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-27
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Work Management: Active Jobs IBM i
© Copyright IBM Corporation 2010
Figure 8-12. Work Management: Active Jobs
OE9810.0
Notes: Selecting Work Management > Active Jobs will display all active jobs on the system. This is equivalent to running the Work active jobs (WRKACTJOB) command. When you right click on your job, notice the actions that you are allowed to take against your job. Note to Administrators: Those users who have the special authority of job control (*JOBCTL) in their profile, they will be able to control other users’ jobs.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-29
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Active Jobs: Customize and Include IBM i
© Copyright IBM Corporation 2010
Figure 8-13. Active Jobs: Customize and Include
OE9810.0
Notes: You can customize or filter which Active Jobs will display. To customize this function, right-click Active Jobs > Customize this view > Include to see the panel in the lower right. You can use the Include dialog to limit the list of active jobs displayed in the Navigator window to those that meet the criteria you specify. For example, you can include all jobs started under a particular user. This is a tool you could use to more quickly and efficiently find the jobs that are of interest to you. The Include criteria that you could use to more quickly and effectively find jobs are the Name, User, Number, and Subsystem parameters. Specifying Type, Current user, and multiple Subsystem does not have as large an effect, but is still much better performing than displaying all active jobs on the system.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-31
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Basic Operations: Printers IBM i
© Copyright IBM Corporation 2010
Figure 8-14. Basic Operations: Printers
OE9810.0
Notes: From System i Navigator you can display a list of printers that are currently configured on your system. From the list of printers, you can start a printer, stop a printer, reply to a message that the printer is waiting on, hold a printer, release a printer, restart a printer, and display the properties of a printer. You can hold, release, and manage output queues and printer writers that are associated with a selected printer. You can also start or stop a printer writer, and you can make printer devices available (vary on) or unavailable (vary off). You can also further customize what this window will display; • Using the F11, Include function you can customize the list to specify which printers you want to include in the list. For example, you can specify the name of a printer or you can select from a list of printers. • Using the F12, Columns function you can also specify which columns of information you want to display in the list and in what order you want the columns to be displayed.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-33
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Basic Operations: Printer Output IBM i
© Copyright IBM Corporation 2010
Figure 8-15. Basic Operations: Printer Output
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-35
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Open a spool file IBM i
© Copyright IBM Corporation 2010
Figure 8-16. Open a spool file
OE9810.0
Notes: You can open Spool files, which is system generated output (a system report), to view it in a PC window. Once the ‘data’ is displayed in a PC window then it is possible to click ‘File-Print’ or ‘Ctrl-P’ to print on your PC attached printer.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-37
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Spool file: Properties IBM i
© Copyright IBM Corporation 2010
Figure 8-17. Spool file: Properties
OE9810.0
Notes: Using the Properties dialog will allow you to change all of the attributes associated with your spooled files. Some of the parameters you might be interested in changing are: • Printer: Specifies the printer that is used to print the file. • Output queue: Specifies the output queue to which the spooled file is moved. This parameter is used only when the specified file is moved from one output queue to another. • Total copies to print: Specifies, for spooled output only, the number of copies of the output being printed. • Expiration: Specifies the expiration date for the spooled file. The spooled file will expire at 23:59:59, system local time on the date specified. You can specify the number of days to keep the spooled file. Note: To actually remove the spooled files off of your system the Delete Expired Spooled Files (DLTEXPSPLF) command has to be run. This is a command that can run from the © Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-39
Instructor Guide
command line or that you add to a scheduler. This is the command that actually removes expired spooled files on the system once the expiration date has been reached. Remember to use the help facilities for any parameters that you may not be familiar with or that may interest you.
8-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-41
Instructor Guide
Spool file: Move IBM i
© Copyright IBM Corporation 2010
Figure 8-18. Spool file: Move
OE9810.0
Notes: The move function allows you to move your spooled file and specify either a different output queue or to a printer that has a printer writer started. Note that the both of these parameters allow you to browse and choose off of a list.
8-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-43
Instructor Guide
Spool file: Copy and paste IBM i
© Copyright IBM Corporation 2010
Figure 8-19. Spool file: Copy and paste
OE9810.0
Notes: Another option available for your spooled files is the copy and paste capability. 1. First you can click and expand the printer output function. 2. Next, locate and right click your spooled file and select Copy on the pop up menu. 3. Then expand the Printers function to see a listing of the printers defined on your system. 4. Lastly, locate and right click the target printer and select Paste on the pop up menu.
8-44 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-45
Instructor Guide
Spool file: Drag and drop IBM i
Drag and drop is supported – Locate and click spooled file = Move function – Drop onto a printer = Move function – Drop onto the desktop = Download to PC and convert to PC .TXT file © Copyright IBM Corporation 2010
Figure 8-20. Spool file: Drag and drop
OE9810.0
Notes: The Drag and drop function is also supported by this GUI. Once you locate your spooled file you can click and drag and drop it onto either: • A printer that has a writer started • The PC desktop. This will download and convert this into a .txt type file. If this were a joblog, this txt file could now be emailed to your technical support personnel.
8-46 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-47
Instructor Guide
Topic 8.3: Managing work through Systems Director Navigator for i
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 8-21. Topic 8.3: Managing work through Systems Director Navigator for i
5.4
OE9810.0
Notes:
8-48 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-49
Instructor Guide
Basic Operations: User Jobs IBM i
© Copyright IBM Corporation 2010
Figure 8-22. Basic Operations: User Jobs
OE9810.0
Notes: To display the Web pages in the visual: 1. Open a Web browser 2. Connect to your system 3. Click and open the Basic Operations page 4. Click and open User Jobs to see the Web page in the lower right in the visual. This is equivalent to running the Work with user jobs (WRKUSRJOB) command. 5. Click the twistie next to your job to show the pop up menus displayed on the visual, notice the actions that you are allowed to take against your job.
8-50 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-51
Instructor Guide
Work Management: Active Jobs IBM i
© Copyright IBM Corporation 2010
Figure 8-23. Work Management: Active Jobs
OE9810.0
Notes: To display the Web pages in the visual: 1. Click and open the Work management page. 2. Click and open Active Jobs to see the Web page in the lower right in the visual. This is equivalent to running the Work with active jobs (WRKACTJOB) command. 3. Click the twistie next to your job to show the pop up menus displayed on the visual, notice the actions that you are allowed to take against your job. Note to Administrators: Those users who have the special authority of job control (*JOBCTL) in their profile, they will be able to control other users’ jobs.
8-52 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-53
Instructor Guide
Active Jobs: Customize and include IBM i
© Copyright IBM Corporation 2010
Figure 8-24. Active Jobs: Customize and include
OE9810.0
Notes: You can customize or filter which Active Jobs will display. To customize this function, click the down arrow for the Select action parameter to click Include to see the panel in the lower right. You can use the Include dialog to limit the list of active jobs displayed in the Navigator window to those that meet the criteria you specify. For example, you can include all jobs started under a particular user. This is a tool you could use to more quickly and efficiently find the jobs that are of interest to you. The Include criteria that you could use to more quickly and effectively find jobs are the Name, User, Number, and Subsystem parameters. Specifying Type, Current user, and multiple Subsystem does not have as large an effect, but is still much better performing than displaying all active jobs on the system.
8-54 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-55
Instructor Guide
Basic Operations: Printers IBM i
© Copyright IBM Corporation 2010
Figure 8-25. Basic Operations: Printers
OE9810.0
Notes: From System Director Navigator for i you can display a list of printers that are currently configured on your system. To display the Web pages in the visual: 1. Click and open the Basic operations page. 2. Click and open Printers to see the Web page in the lower right in the visual. This is equivalent to running the Work with writers (WRKWTR) command. 3. Click the twistie next to your printer to show the pop up menus displayed on the visual, notice the actions that you are allowed to take against your printer. Notice the action you take for your printers when you click the twistie to open the pop up menu. You can also further customize what this Web page will display, click the down arrow for Select action and choose one of the following: • Using the Include function you can customize the list to specify which printers you want to include in the list. For example, you can specify the name of a printer or you can select from a list of printers. 8-56 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Using the Columns function you can also specify which columns of information you want to display in the list and in what order you want the columns to be displayed.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-57
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-58 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Basic Operations: Printer Output IBM i
© Copyright IBM Corporation 2010
Figure 8-26. Basic Operations: Printer Output
OE9810.0
Notes:
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-59
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-60 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Open a spool file IBM i
© Copyright IBM Corporation 2010
Figure 8-27. Open a spool file
OE9810.0
Notes: You can open Spool files, which is system generated output (a system report), to view it in a PC window. Once the ‘data’ is displayed in a PC window then it is possible to click ‘File-Print’ or ‘Ctrl-P’ to print on your PC attached printer.
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-61
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
8-62 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Spool file: Properties IBM i
© Copyright IBM Corporation 2010
Figure 8-28. Spool file: Properties
OE9810.0
Notes: Using the Properties page will allow you to change all of the attributes associated with your spooled files. Some of the parameters you might be interested in changing are: • Printer: Specifies the printer that is used to print the file. • Output queue: Specifies the output queue to which the spooled file is moved. This parameter is used only when the specified file is moved from one output queue to another. • Total copies to print: Specifies, for spooled output only, the number of copies of the output being printed. • Expiration: Specifies the expiration date for the spooled file. The spooled file will expire at 23:59:59 on the date specified. You can specify the number of days to keep the spooled file. Note: To actually remove the spooled files off of your system the Delete Expired Spooled Files (DLTEXPSPLF) command has to be run. This is a command that can run from the © Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-63
Instructor Guide
command line or that you add to a scheduler. This is the command that actually removes expired spooled files on the system once the expiration date has been reached. Remember to use the question mark (?) help facilities for any parameters that you may not be familiar with or that may interest you.
8-64 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-65
Instructor Guide
Spool file: Move IBM i
© Copyright IBM Corporation 2010
Figure 8-29. Spool file: Move
OE9810.0
Notes: The move function allows you to move your spooled file and specify either a different output queue or to a printer that has a printer writer started. Note that the both of these parameters allow you to browse and choose off of a list.
8-66 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-67
Instructor Guide
Checkpoint (1 of 3) IBM i
1. Once a batch job has been submitted to the system, it will not require any more input from the operator. a. True b. False
2. Which of the following commands cannot be used for job control? a. WRKUSRJOB b. WRKACTJOB c. WRKSPLFIL d. WRKJOBQ
© Copyright IBM Corporation 2010
Figure 8-30. Checkpoint (1 of 3)
OE9810.0
Notes:
8-68 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 3) IBM i
1. Once a batch job has been submitted to the system, it will not require any more input from the operator. a. True b. False
2. Which of the following commands cannot be used for job control? a. WRKUSRJOB b. WRKACTJOB c. WRKSPLFIL d. WRKJOBQ
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-69
Instructor Guide
Checkpoint (2 of 3) IBM i
3. WRKWTR and STRPRTWTR perform the same function. a. True b. False
4. You can use System i Navigator to manage print spools. a. True b. False
5. The WRKUSR job command will show all of the active jobs on the system. a. True b. False
© Copyright IBM Corporation 2010
Figure 8-31. Checkpoint (2 of 3)
OE9810.0
Notes:
8-70 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 3) IBM i
3. WRKWTR and STRPRTWTR perform the same function. a. True b. False
4. You can use System i Navigator to manage print spools. a. True b. False
5. The WRKUSR job command will show all of the active jobs on the system. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-71
Instructor Guide
Checkpoint (3 of 3) IBM i
6. The WRKACTJOB job command will show only your active jobs. a. True b. False
7. The contents of a spool file (the actual report itself) can be viewed with which of the following? a. Display session b. System i Navigator window c. Systems Director Navigator for i d. All of the above e. Two of the above
© Copyright IBM Corporation 2010
Figure 8-32. Checkpoint (3 of 3)
OE9810.0
Notes:
8-72 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (3 of 3) IBM i
6. The WRKACTJOB job command will show only your active jobs. a. True b. False
7. The contents of a spool file (the actual report itself) can be viewed with which of the following? a. Display session b. System i Navigator window c. Systems Director Navigator for i d. All of the above e. Two of the above
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-73
Instructor Guide
Exercise 5: Tracking jobs and printouts IBM i
Exercise time
Please complete Exercise 5 Tracking jobs and printouts
© Copyright IBM Corporation 2010
Figure 8-33. Exercise 5: Tracking jobs and printouts
OE9810.0
Notes: In this lab you will submit a program to run in batch mode using a display session. In previous labs you learned how to Run a command using the System i Navigator and the Systems Director Navigator for i. Since that was already covered in a previous lab, we will not be covering those steps again in this lab.
8-74 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-75
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • List the types of jobs that can run on the system • Describe the difference between a batch and an interactive job • Identify the stages of a batch job • Execute the command to display your jobs • Execute the command to display all active jobs • Explain how to control jobs on the system • Execute the command to view your spool files • Control printer output on the system • Perform all of these tasks through a display session as well as using System i Navigator and Systems Director Navigator for i © Copyright IBM Corporation 2010
Figure 8-34. Unit summary
OE9810.0
Notes:
8-76 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 8. Managing your work
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
8-77
Instructor Guide
8-78 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 9. Security overview Estimated time 00:30
What this unit is about It is helpful to have a basic understanding of how security works on the IBM i, even if your responsibilities do not include the maintenance of security on the system. This understanding will enable you to make recommendations on how security should be defined for objects you are responsible for on your job.
What you should be able to do After completing this unit, you should be able to: • Explain what authority can be specified for an object • Describe the tools used to secure your system • List some of the information stored in a user profile • List the user classes that can be created on the system • Describe the different assistance levels that can be specified • Explain how to change your password
How You Will Check Your Progress • Checkpoint questions
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Explain what authority can be specified for an object • Describe the tools used to secure your system • List some of the information stored in a user profile • List the user classes that can be created on the system • Describe the different assistance levels that can be specified • Explain how to change your password
© Copyright IBM Corporation 2010
Figure 9-1. Unit objectives
OE9810.0
Notes:
9-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-3
Instructor Guide
Topic 9.1: Security concepts
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 9-2. Topic 9.1: Security concepts
5.4
OE9810.0
Notes:
9-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-5
Instructor Guide
System tools used to secure your system IBM i
• Security level • System values • User profiles • Groups profiles • Object / resource security • Security auditing
© Copyright IBM Corporation 2010
Figure 9-3. System tools used to secure your system
OE9810.0
Notes: Security Level: The level of security at which the system runs. There are five levels of security that can be set with the QSECURITY system value. System Values: Allow you to define system wide security settings and to provide customization for many characteristics of your IBM i. User Profiles: The user profile is powerful and flexible tool used to control what the user can do and customize the way the system appears to that user. Groups Profiles: A group profile is a special type of user profile. Rather than giving authority to each user individually, you can use a group profile to define authority for a group of users. Resource Security: The ability to access an object is called authority. Resource security on the IBM i operating system enables you to control object authorities by defining who can use which objects and how those objects can be used. Security Audit Journal: The IBM i operating system provides the ability to log selected security-related events in a security audit journal. 9-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-7
Instructor Guide
User profile IBM i
An object that stores user info, such as: • User ID and password • What class of user you are • Initial menu and current library • What assistance level is default
Mary Smith Programmer
• Lists any additional system privileges that may be assigned • Identifies characteristics for work initiated by the user • Controls what the user is allowed to do after signing on • They are used to identify the user’s jobs and printer output. • Contains information about the objects owned by the user • Contains information about private authorities to objects © Copyright IBM Corporation 2010
Figure 9-4. User profile
OE9810.0
Notes: Your user profile is created by the security officer or someone with the same level of security. User profiles are used to identify the user, to identify what the user can do, how and where user jobs will run. It also defines if any additional system privileges are assigned to a profile, above what is normally assigned based on the user class. Basically it is used to identify who are the users allowed to sign on the system and what can they do once they are signed on. It contains various pieces of information regarding which resources you have been given permission to use and what system functions you can perform. In addition, the menu displayed when you sign in is also set in your user profile. Note to Administrators: The key parameter in the CRTUSRPRF command is user class, which dictates a user's special authorities.
9-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
• Examples of user class include *SECOFR (all special authorities are provided) and *SYSOPR (special authorities applicable to system operators are provided). • Examples of special authorities include *JOBCTL (this user can control all users' jobs) and *SECADM (this user can create and change user profiles). The user profile specifies security attributes as well as job environment attributes (that is, current library, initial menu, default printer) for a user.
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-9
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
9-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
User classes and what they can do IBM i
User classes that can be defined Special Authority
© Copyright IBM Corporation 2010
Figure 9-5. User classes and what they can do
OE9810.0
Notes: The table shows the User classes (the different types of users) available on the system. Each class has a default set of system privileges or authorities. The authorities specified under System privileges override the default privileges for this user or group. When you are working with a group, the privileges specified apply to all users who are members of that group. The different types of users (the user class) that can be defined on the system are: • User: The user does not get any privileges on systems that are security level 30 or higher. The user's default privileges are save/restore and all object access on systems that are at security levels 10 and 20. • Programmer: The user does not get any privileges on systems that are security level 30 or higher. The user's default privileges are save/restore, job control, and all object access on systems that are at security levels 10 and 20. • System operator: The user's default privileges are save/restore and job control on systems that are security level 30 or higher. The user's default privileges are © Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-11
Instructor Guide
save/restore, job control, and all object access on systems that are at security levels 10 and 20. • Security administrator: The user's special authority is security administration on systems that are security level 30 or higher. The user's default privileges are save/restore, job control, security administration, and all object access on systems that are at security levels 10 and 20. • Security officer: The user's default privileges are all object access, save/restore, auditing control, security administration, system configuration, system service access, job control, and spool control. Note: The security level that is recommended is level 40. Systems ship with level 40 security set as the default.
9-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-13
Instructor Guide
Assistance levels IBM i
• The IBM i operating system allows you to choose the amount of assistance you want to receive in your interaction with the system. • The difference between the assistance levels is in the number and complexity of the menus and displays that you see. • This is one of the values controlled through a user profile. • The operating system provides three assistance levels: – Basic
- For new users, easy-to-understand
– Intermediate
- Uses computer terminology and allows complex task to be performed
– Advanced
- Assumes you are experienced and less assistance given © Copyright IBM Corporation 2010
Figure 9-6. Assistance levels
OE9810.0
Notes: Two users can enter the very same command, such as the WRKSPLF command, but receive two very different displays as a result of the assistance level in their respective user profiles. A basic user will receive a display appropriate for a user with little system experience while an intermediate user will receive a more complex display. Basic Assistance Level: The basic assistance level uses the types of displays that have the most assistance available. This is the recommended level for new end users. It supports the most commonly used tasks in easy-to-understand terminology.
9-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-15
Instructor Guide
What authorization can be specified for an object? IBM i
• Use: – The user can use the object, but cannot change it.
SECRET
OBJECT authorization
• Change: – The user can use the object and change the content.
• All: – The user can use the object, change its content, and delete the object or change the authorization for the object.
All
• Exclude:
OBJECT authorization
– The user is prevented from accessing the object. © Copyright IBM Corporation 2010
Figure 9-7. What authorization can be specified for an object?
OE9810.0
Notes: One way to control the security on your System is to control who the users are and what they can do on the system. Another way to control security is to secure each object on the system. Using Resource security, also called Object security, you can control who is authorized to access an object and what can they do with that object. Note to Administrators: • Use the EDTOBJAUT command to specify user authorizations for a particular object. • User profiles of security class *SECOFR are given by default special authority *ALLOBJ which means they have access to all objects on the system. • The default authority for users who are not explicitly given authority to an object is known as an object's 'public' authority which is set at object creation time. • To ease the administration of object authorizations, use: - Limited capability users who are restricted to specific menus and from most commands.
9-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
- Group profiles: Give multiple users authority to an object in one step. - Restrict users from the library and they will be restricted from objects in that library.
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-17
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
9-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Where is object authorization specified? IBM i
Public authority can be specified: a. In the object's definition
Public
OBJECT authorization
Private authority can be specified: a. In the user profile for each user, OR
Mary Smith Programmer
b. In a group profile for many users, OR
Same authorities using the same objects
c. In an authorization list for many users with different authorization
Use Change All Exclude
© Copyright IBM Corporation 2010
Figure 9-8. Where is object authorization specified?
OE9810.0
Notes: In the command used to create an object, one of the parameters defines what authority the public will be granted to this object. As soon as a new user is created on the system, that user becomes a member of Public. To set resource security, a system administrator or a security officer can run a command to allow a user to access and object and specify exactly what authority or permission that user ill have to that object. Group profiles are used to quickly and easily set security on the system. An administrator can set up resource security and assign those permissions to a group profile. Then you will specify which users belong to that group. Then you can add or remove authorities at the group level and they will flow down to all of the members who belong to that group. Another way to implement resource security is using an authorization list. First an administrator will create an authorization list. Next the user will add users to this authorization list. For each user you will specify what authority that user will have to each and all of the objects that are secured by this authorization list. Lastly, each object is now
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-19
Instructor Guide
assigned to be secured by this authorization list. An object can only be secured by one authorization list. Note to Administrators: • Public authority refers to the default level of access for users who are not explicitly authorized to an object. This is set at object creation time using the AUT parameter on most create object commands.
9-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-21
Instructor Guide
Topic 9.2: Security changes a user can make
Powertm with IBM i © Copyright IBM Corporation 2010 Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
Figure 9-9. Topic 9.2: Security changes a user can make
5.4
OE9810.0
Notes:
9-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-23
Instructor Guide
Changing your password IBM i
Mary Smith Programmer
It's a good idea to write your password Down. Make sure no one knows where to find it.
From the operational Assistant menu select option Type current password : OE98PWD (The password does not show up on the screen). Press Field Exit. Type your new password. Press Field Exit. Type your new password. Press Enter. © Copyright IBM Corporation 2010 Figure 9-10. Changing your password
OE9810.0
Notes: The change password (CHGPWD) command is used to change your password. This is a command that an end user can call from the command line. The most common way that an end user will change their password will be at sign-on time. By setting a system value the security officer can set up your system so that passwords expire after a certain time period, for example users must change their passwords every 30 or 60 days. When this time is reached the passwords go to an expired status, at the next sign-on users are prompted to change their passwords. Note to Administrators: • WRKSYSVAL *SEC shows all security-related system values. • System values are global-wide values applicable to all users. • Here a couple of examples of system values that relate to security: - Password will expire after x number of days (QPWDEXPUTV)
9-24 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
- The minimum number of characters that can be specified for a password (QPWDMINLEN) - The maximum number of characters that can be specified for a password (QPWDMAXLEN) - The number of times a user can type in the wrong password before that user's user profile is disabled (QMAXSIGN) - When passwords will expire (QPWDEXPITV).
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-25
Instructor Guide
Instructor notes: Purpose — Details — Additional information — Transition statement —
9-26 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Changing your profile IBM i
On any command line, type CHGPRF and press F4. Type your user profile name in the User profile prompt. Press Enter. Mary Smith Programmer
Press the Tab key to move your cursor to the Assistance level prompt. Type the assistance level of your choice: (*BASIC , *INTERMED or *ADVANCED) Press Enter. © Copyright IBM Corporation 2010
Figure 9-11. Changing your profile
OE9810.0
Notes: Depending on your class of user, that will determine what authority or permissions you have and what you can change in your profile. The user profiles for this class, OE98xx are set up as a class of ‘User’. A user profile that has a class of ‘User’ can run the change profile command and is very limited in what you can change on the system. The CHGPRF command can only be run from a display session, there is no equivalent that can be run via GUI. The only alternative via GUI is to submit via the Run a command function that was addressed earlier in class. There are multiple ways to set assistance level on the system: 1. This user can run the change profile (CHGPRF) command but you are very limited in what you can change. You can set the level of assistance you receive when interacting with the system. The default assistance level will then be applied to all displays presented by the system. 2. A way to temporarily change the assistance level is available when you use individual commands to display ‘work with’ screens, these are the commands that begin with © Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-27
Instructor Guide
‘WRK”. Once the command is processed and you are looking at the screen it generated, you can toggle between assistance levels using the F21 key. 3. When you run a specific command, prompt the command and look for the assistance level parameter so that you can set how the system should display the requested information. The last assistance level you requested for a particular command is remembered by the system. This assistance level is used the next time you enter that command. Not all commands have different assistant levels. Commands that perform various system operations, such as managing printed output, jobs, and devices have assistance levels available. You can also change your initial menu when using the CHGPRF command. This is one of the parameters that can be locked by a security officer, so depending on how your System is defined this may or may not be one of the changes you are allowed to make. Note to Administrators: • GO CMDUSPRF provides all user profile commands including CHGUSRPRF, which security administrators use to change user profiles. • CRTUSRPRF parameter Limited Capabilities = *yes prevents users from changing their initial menu and program at the sign-on screen or with the CHPRF command. Also, these users are by default allowed to run very few CL commands. Hence, you can isolate users into specific application environments.
9-28 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-29
Instructor Guide
Assistance level parameter IBM i
© Copyright IBM Corporation 2010
Figure 9-12. Assistance level parameter
OE9810.0
Notes: When you are running an individual command, you can prompt the command using the F4 key. Once on the prompt screen then press the F10, additional parameters key to see the Assistance level parameter. When you specify this parameter it will override what has been specified in the user profile for assistance level.
9-30 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-31
Instructor Guide
Connection to server: Change Password IBM i
© Copyright IBM Corporation 2010
Figure 9-13. Connection to server: Change Password
OE9810.0
Notes: To change your password using this GUI you would: • Open System i Navigator • Click and sign-on to your system • Right click on your system • Choose Connect to Server > Change password on the pop up menus • Enter you current password followed by the new password, remember to adhere to the password rules set by your system administrator. • Click OK System i Navigator does not provide an option to CHGPRF. That is a command that can only be run from the command line or submitted via the Run a command function.
9-32 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-33
Instructor Guide
System tasks: Change Password IBM i
© Copyright IBM Corporation 2010
Figure 9-14. System tasks: Change Password
OE9810.0
Notes: To change your password using this GUI you would: • Open a browser window and start connection to system with Systems Director Navigator for i • Click and expand the System link • Click the Change password link to see page in lower right • Notice that this GUI provides more options of values that can be changed than the previous two interfaces. Assuming you had the correct class of user profile there is even a button to make changes to password system values; this would make changes effective for the entire system as opposed to just one user profile. • Click OK when you are done making the required changes.
9-34 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-35
Instructor Guide
Checkpoint (1 of 2) IBM i
1. Which of the following is a true statement regarding user profiles? a. Each profile can have a unique main menu b. Determines what resources are owned by the profile c. Has the ability to dictate special authorities to each user d. All the above e. None of the above
2. Once your profile has been created, you cannot change assistance levels. a. True b. False
© Copyright IBM Corporation 2010
Figure 9-15. Checkpoint (1 of 2)
OE9810.0
Notes:
9-36 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (1 of 2) IBM i
1. Which of the following is a true statement regarding user profiles? a. Each profile can have a unique main menu b. Determines what resources are owned by the profile c. Has the ability to dictate special authorities to each user d. All the above e. None of the above
2. Once your profile has been created, you cannot change assistance levels. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-37
Instructor Guide
Checkpoint (2 of 2) IBM i
3. The CHGPRF (change profile) command can be run from any of the interfaces covered in lecture. a. True b. False
4. System i Navigator can be used to change the password for a user profile. a. True b. False
© Copyright IBM Corporation 2010
Figure 9-16. Checkpoint (2 of 2)
OE9810.0
Notes:
9-38 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details —
Checkpoint solutions (2 of 2) IBM i
3. The CHGPRF (change profile) command can be run from any of the interfaces covered in lecture. a. True b. False
4. System i Navigator can be used to change the password for a user profile. a. True b. False
© Copyright IBM Corporation 2010
Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-39
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Explain what authority can be specified for an object • Describe the tools used to secure your system • List some of the information stored in a user profile • List the user classes that can be created on the system • Describe the different assistance levels that can be specified • Explain how to change your password
© Copyright IBM Corporation 2010
Figure 9-17. Unit summary
OE9810.0
Notes:
9-40 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 9. Security overview
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
9-41
Instructor Guide
9-42 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Unit 10. Additional education Estimated time 00:10
What this unit is about This unit describes the education that is available for the IBM i. Where to find the information and how to use the roadmap is also covered.
What you should be able to do After completing this unit, you should be able to: • Describe additional education courses for the IBM i.
How You Will Check Your Progress • Classroom discussion
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-1
Instructor Guide
Unit objectives IBM i
After completing this unit, you should be able to: • Describe additional educational courses for the IBM i.
© Copyright IBM Corporation 2010
Figure 10-1. Unit objectives
OE9810.0
Notes:
10-2 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-3
Instructor Guide
IBM Web site for education IBM i
© Copyright IBM Corporation 2010
Figure 10-2. IBM Web site for education
OE9810.0
Notes: This site can be accessed from: http://www.ibm.com/services/learning Select from any of the three choices: • Training in the United States • Browse for training by country • Conferences and events
10-4 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-5
Instructor Guide
Power Systems Education IBM i
© Copyright IBM Corporation 2010
Figure 10-3. Power Systems Education
OE9810.0
Notes: The URL for this Web page is: http://www-03.ibm.com/systems/power/education/
10-6 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-7
Instructor Guide
IBM i Training paths IBM i
© Copyright IBM Corporation 2010
Figure 10-4. IBM i Training paths
OE9810.0
Notes:
10-8 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-9
Instructor Guide
IBM i system operator roadmap IBM i
© Copyright IBM Corporation 2010
Figure 10-5. IBM i system operator roadmap
OE9810.0
Notes: Notice that the roadmap covers not only classroom classes but also Instructor Led Online (ILO) courses.
10-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-11
Instructor Guide
Unit summary IBM i
Having completed this unit, you should be able to: • Describe additional educational courses for the IBM i.
© Copyright IBM Corporation 2010
Figure 10-6. Unit summary
OE9810.0
Notes:
10-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-13
Instructor Guide
Class evaluation IBM i
Please fill out Student Evaluation form.
Use class number ________
Use class number ________
© Copyright IBM Corporation 2010
Figure 10-7. Class evaluation
OE9810.0
Notes:
10-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-15
Instructor Guide
Thank you IBM i
IBM i
Thank You! © Copyright IBM Corporation 2010
Figure 10-8. Thank you
OE9810.0
Notes:
10-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Uempty
Instructor notes: Purpose — Details — Additional information — Transition statement —
© Copyright IBM Corp. 1996, 2010
Unit 10. Additional education
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
10-17
Instructor Guide
10-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V4.1 Instructor Guide
AP
Appendix A. Menus for system operations The following is a list of menus that are particularly useful in controlling and operating the system. You can access any of these menus directly from any display having a command line. Just type GO plus a menu ID from the following list: ASSIST The Operational Assistant (ASSIST) menu simplifies some of the common user tasks, such as working with printer output, jobs, messages, and changing your password. In addition, users with proper authority can select options to manage or customize the system, check the system status, clean up objects, power the system on and off, enroll users, change some system options, and collect disk space information. BACKUP The Backup Tasks (BACKUP) menu allows you to back up (save) the system and initialize the tapes that are used during backup. CLEANUP The Cleanup (CLEANUP) menu allows you to start, end, or change automatic cleanup. The cleanup function deletes old job logs, history logs, messages, office calendar items, and journal receivers that take up storage space. DEVICESTS The Device Status (DEVICESTS) menu allows you to choose options for working with system devices, such as display stations, printers, tape drives, and diskette drives. FILE The Files (FILE) menu allows you to work with files on the system. FOLDER The Folders (FOLDER) menu allows you to manage folders. Folders can be used to store other folders and documents. INFO The Information Assistant* Options (INFO) menu allows you to find out where to look for information about your IBM i system and how to comment on that information. You can also use this menu to find out what is new in this release of the IBM i system and what new enhancements and functions will be available in the next release. LIBRARY The Libraries (LIBRARY) menu allows you to work with libraries.
© Copyright IBM Corp. 1996, 2010
Appendix A. Menus for system operations
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
A-1
Instructor Guide
MANAGESYS The Manage Your System, Users, and Devices (MANAGESYS) menu allows you to display what activity is occurring in the system, run backup, and work with the devices on the system. PROBLEM The Problem Handling (PROBLEM) menu allows you to work with problems, ask questions, and receive answers using the question and answer database, display system operator messages, display the history log, and start system service tools (SST). RESTORE The Restore (RESTORE) menu allows you to restore saved information from tape, or save file (SAVF) on the system. RUNBCKUP On the Run a Backup (RUNBCKUP) menu, you can select a menu option to specify the type of backup you want to run. SETUP The Customize Your System, Users, and Devices (SETUP) menu lets you customize automatic cleanup, schedule when your system will power on and off, and enroll users. SETUPBCKUP The Set Up Backup (SETUPBCKUP) menu allows you to change backup options, lists, and schedules. STATUS The Status (STATUS) menu allows you to display the status of jobs, devices, and system activities. SYSTEM The General System Tasks (SYSTEM) menu allows you to control system operations, devices, and all jobs on the system. TAPE The Tape (TAPE) menu allows you to use and control tape devices. TECHHELP The Technical Support Tasks (TECHHELP) menu provides options to help resolve problems on the system. USERHELP The Information and Problem Handling (USERHELP) menu provides additional information about the system and is useful in attempting to resolve problems.
A-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V4.1 Instructor Guide
AP
Appendix B. Commonly used commands Command Name
Brief description
CRTLIB
Create a library.
DSPLIB
Display a library.
GO *ALL
List all menus for system commands.
GO ASSIST
Go to the operational assistant menu.
GO CMDJOB
Find all job commands.
Go CMDOUTQ
Find all out queue commands.
GO INFO
Go to the information assistant options menu.
GO MAIN
Go to the main menu.
GO PRINTER
Go to printer menu.
GO SUPPORT
Go to the support and education menu.
SIGNOFF
Sign you off the system.
SNDBRKMSG
Send break message.
SNDMSG
Send message.
STRPRTWTR
Start print writer.
WRKJOB
Work with job (your job).
WRKJOBQ
Work with job queues.
WRKOUTQ
Work with out queues.
WRKMSGQ
Work with message queues.
WRKSPLF
Work with spooled files.
© Copyright IBM Corp. 1996, 2010
Appendix B. Commonly used commands
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
B-1
Instructor Guide
B-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Appendix C. Checkpoint solutions Unit 1
Checkpoint solutions (1 of 2) IBM i
1. Which of the following is a resource for IBM i information? a. Information Center b. IBM i home page c.
IBM i Redbooks Web page
d. All the above
2. Which of the following provide a user interface to the IBM i? a. 5250 emulation session b. System i Navigator c.
Systems Director Navigator for i
d. All the above e. Only two of the above © Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-1
Instructor Guide
Checkpoint solutions (2 of 2) IBM i
3. Which of the following is supported by IBM i? a. b. c. d. e.
Central site maintenance DB2 support Java All the above Only two of the above
© Copyright IBM Corporation 2010
C-2
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Unit 2
AP
Checkpoint solutions (1 of 3) IBM i
1. To sign on to an IBM i using 5250 emulation, you will need a user ID, password, and program ID. a. True b. False
2. It is possible to customize the main menu the user will see when logging on to an IBM i. a. True b. False
3. Which keys on a PC keyboard can clear the "More" when it is displayed in the lower right-hand corner of the screen? a. b. c. d.
Enter key Ctrl key Pause PgUp or PgDn © Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-3
Instructor Guide
Checkpoint solutions (2 of 3) IBM i
4. Which of the following is a method to access Operational Assistant? a. b. c. d.
Pressing the ESC key Pressing the Ctrl Break key Selecting option 80 on the menu screen Typing "go assist" on the command line
5. You can use the same user ID and password to sign on to System i Navigator that you use to sign on to a display session on the same system. a. True b. False
© Copyright IBM Corporation 2010
C-4
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (3 of 3) IBM i
6. You must make a choice to either sign on to the display session or System i Navigator, since you cannot sign on to both at the same time. a. True b. False
7. IBM Systems Director Navigator for i can be used to perform which of the following tasks? a. b. c. d.
User System operator System administrator All of the above
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-5
Instructor Guide
Unit 3
Checkpoint solutions (1 of 2) IBM i
1. You can prompt the system for possible choices by placing the cursor somewhere within an entry field and pressing the ___ key. a. b. c. d.
F3 F4 F5 F6
2. Which assistance level will allow you job control and uses computer jargon to communicate with you? a. Assistance level 1 b. Assistance level 2
© Copyright IBM Corporation 2010
C-6
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (2 of 2) IBM i
3. Using System request can start an alternate session at your display station. a. True b. False
4. Using the include function, it is possible to specify what information is to be displayed for a task using the GUI . a. True b. False
5. Using the include columns function, it is possible to choose which columns of information and in what order they are displayed in a 5250 green screen session. a. True b. False © Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-7
Instructor Guide
Unit 4
Checkpoint solutions IBM i
1. Which of the following are not a way you can access help on a Display session? a. Using F2 b. Using F1 c. Using F4 d. Using F12
2. Help screens are only available when using the Display session interface. a. True b. False
© Copyright IBM Corporation 2010
C-8
Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Unit 5
AP
Checkpoint solutions (1 of 3) IBM i
1. Each user has a mailbox (a message queue) with the same name as his or her user profile name. a. True b. False
2. Which message type has the highest priority? a. b. c. d.
Break Informational System User
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-9
Instructor Guide
Checkpoint solutions (2 of 3) IBM i
3. Which of the following is not a valid delivery mode for a message? a. b. c. d. e.
Default Notify Hold Break System
4. When using System i Navigator, the message function is found under what tab? a. b. c. d. e.
Work Management Configuration and Service Security Basic Operations Users and Groups © Copyright IBM Corporation 2010
C-10 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (3 of 3) IBM i
5. Break messages can be sent to users signed on through one of the graphical interfaces. a. True b. False
6. When using System i Navigator or Systems Director Navigator for i, it is possible to display only your messages. a. True b. False
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-11
Instructor Guide
Unit 6
Checkpoint solutions (1 of 3) IBM i
1. What is the easiest way to find a command you need? a. Press F1 on any screen. b. Press F4 with the cursor on the command line. c. Press F1 with the cursor on the command line. d. Press F4 with the cursor in any position on the screen. 2. Some CL commands have default values for parameter entries. a. True b. False
© Copyright IBM Corporation 2010
C-12 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (2 of 3) IBM i
3. Match the purpose of the function key with the correct key. F1
1. Retrieve commands
F4
2. Help
F9
3. Provides assistance with commands
a. F1 = 2, F4 = 1, F9 = 3 b. F1 = 2, F4 = 3, F9 = 1 c. F1 = 3, F4 = 2, F9 = 1 d. F1 = 1, F4 = 3, F9 = 2
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-13
Instructor Guide
Checkpoint solutions (3 of 3) IBM i
4. When using F4 for command assistance, all values are displayed, including default values. a. True b. False
5. When using System i Navigator to run a command, you can use F4 to display all the parameters. a. True b. False
© Copyright IBM Corporation 2010
C-14 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Unit 7
AP
Checkpoint solutions (1 of 3) IBM i
1. Which of the following is not an object on the IBM i? a. Files b. Programs c. Commands d. Record e. Libraries
2. Which of the following is a valid use of a library? a. A library is an object used to store applications. b. A library is an object used to store production data. c. A library is an object used to store security information. d. All the above are valid use of a library. e. None of the above is a valid use of a library. © Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-15
Instructor Guide
Checkpoint solutions (2 of 3) IBM i
3. Each user can have a list of libraries assigned; this list can be customized for each user. a. True b. False
4. Which of the following is a correct statement regarding a library list? a. The library list is only used to find application programs. b. The library list is searched from the top to the bottom when searching for an object. c. A library list cannot be configured for a specific user. d. Using the command DSPLIBL only shows IBM-supplied libraries.
© Copyright IBM Corporation 2010
C-16 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (3 of 3) IBM i
5. When using the GUI, you can use the IFS as a way to find objects on the system. a. True b. False
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-17
Instructor Guide
Unit 8
Checkpoint solutions (1 of 3) IBM i
1. Once a batch job has been submitted to the system, it will not require any more input from the operator. a. True b. False
2. Which of the following commands cannot be used for job control? a. WRKUSRJOB b. WRKACTJOB c. WRKSPLFIL d. WRKJOBQ
© Copyright IBM Corporation 2010
C-18 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
AP
Checkpoint solutions (2 of 3) IBM i
3. WRKWTR and STRPRTWTR perform the same function. a. True b. False
4. You can use System i Navigator to manage print spools. a. True b. False
5. The WRKUSR job command will show all of the active jobs on the system. a. True b. False
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-19
Instructor Guide
Checkpoint solutions (3 of 3) IBM i
6. The WRKACTJOB job command will show only your active jobs. a. True b. False
7. The contents of a spool file (the actual report itself) can be viewed with which of the following? a. Display session b. System i Navigator window c. Systems Director Navigator for i d. All of the above e. Two of the above
© Copyright IBM Corporation 2010
C-20 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4 Instructor Guide
Unit9
AP
Checkpoint solutions (1 of 2) IBM i
1. Which of the following is a true statement regarding user profiles? a. Each profile can have a unique main menu b. Determines what resources are owned by the profile c. Has the ability to dictate special authorities to each user d. All the above e. None of the above
2. Once your profile has been created, you cannot change assistance levels. a. True b. False
© Copyright IBM Corporation 2010
© Copyright IBM Corp. 1996, 2010
Appendix C. Checkpoint solutions
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
C-21
Instructor Guide
Checkpoint solutions (2 of 2) IBM i
3. The CHGPRF (change profile) command can be run from any of the interfaces covered in lecture. a. True b. False
4. System i Navigator can be used to change the password for a user profile. a. True b. False
© Copyright IBM Corporation 2010
C-22 Introduction to IBM i for New Users
© Copyright IBM Corp. 1996, 2010
Course materials may not be reproduced in whole or in part without the prior written permission of IBM.
V5.4
backpg
Back page