Keil Embedded C Tutorial.pdf

4/7/2015

Keil Embedded C Tutorial


 From Rikipedia

Home (/) / Rikipedia (/wiki/) / Keil Embedded C Tutorial

Embedded Wiki

Page (/wiki/Keil_Embedded_C_Tutorial) Discussion (/mediawiki/index.php?title=Talk:Keil_Embedded_C_Tutorial&action=edit&redlink=1)  Nav   Edit 

 Table of Content



Introduction to Keil C Keywords Memory Models Pointers in Keil C Generic Pointers Memory-Specific Pointers Functions in Keil C Function Declaration Writing First C program in Keil Basic of a C program Writing Hardware specific code Writing C and Assembly together Interfacing C program to Assembler Segment naming Advanced C programming Function Parameters Fucntion Return Values

Introduction to Keil C The use of C language to program microcontrollers is becoming too common. And most of the time its not easy to buld an application in assembly which instead you can make easily in C. So Its important that you know C language for microcontroller which is commonly known as Embedded C. As we are going to use Keil C51 Compiler, hence we also call it Keil C.

Keywords Keil C51 compiler adds few more keywords to the scope C Language: _at_

far

sbit

alien

idata

sfr

bdata

interrupt

sfr16

bit

large

small

code

pdata

_task_

compact

_priority_

using

data

reentrant

xdata

http://www.8051projects.net/wiki/Keil_Embedded_C_Tutorial#Writing_Hardware_specific_code

1/14

4/7/2015


data/idata Description: The variable will be stored in internal data memory of controller. example: 1.

unsigned char data x;

2.

//or

3.

unsigned char idata y;

bdata Description: The variable will be stored in bit addressable memory of controller. example: 1.

unsigned char bdata x;

2.

//each bit of the variable x can be accessed as follows

3.

x ^ 1 = 1; //1st bit of variable x is set

4.

x ^ 0 = 0; //0th bit of variable x is cleared

xdata Description: The variable will be stored in external RAM memory of controller. example: 1.

unsigned char xdata x;

code Description: This keyword is used to store a constant variable in code memory. Lets say you have a big string which is not going to change anywhere in program. Wasting ram for such string will be foolish thing. So instead we will make use of the keyword "code" as shown in example below. example: 1.

unsigned char code str="this is a constant string";

pdata Description: This keyword will store the variable in paged data memory. This keyword is used occasionally. example: 1.

unsigned char pdata x;

_at_ Description: This keyword is used to store a variable on a defined location in ram. example: 1.

unsigned char idata x _at_ 0x30;

2.

// variable x will be stored at location 0x30

3.

// in internal data memory

sbit Description: This keyword is used to define a special bit from SFR (special function register) memory. example: 1.

sbit Port0_0 = 0x80;

2.

// Special bit with name Port0_0 is defined at address 0x80

sfr Description: sfr is used to define an 8-bit special function register from sfr memory. example: 1.

sfr Port1 = 0x90;

2.

// Special function register with name Port1 defined at addrress 0x90


2/14

4/7/2015


sfr16 Description: This keyword is used to define a two sequential 8-bit registers in SFR memory. example: 1.

sfr16 DPTR = 0x82;

2.

// 16bit special function register starting at 0x82

3.

// DPL at 0x82, DPH at 0x83

using Description: This keyword is used to define register bank for a function. User can specify register bank 0 to 3. example: 1.

void function () using 2

2.

{

3.

4.

}

5.

// Funtion named "function" uses register bank 2 while executing its code

// code

interrupt Description: This keyword will tells the compiler that function described is an interrupt service routine. C51 compiler supports interrupt functions for 32 interrupts (0-31). Use the interrupt vector address in the following table to determine the interrupt number.

Vector Address Locations example: 1.

void External_Int0() interrupt 0

2.

{

3.

4.

}

//code

Memory Models There are three kind of memory models available for the user: Small All variables in internal data memory. Compact Variables in one page, maximum 256 variables (limited due to addressing scheme, memory accessed indirectly using r0 and r1 registers); large All variables in external ram. variables are accessed using DPTR. Depending on our hardware configuration we can specify the momory models as shown below:


3/14

4/7/2015


1.

//For Small Memory model

2.

#pragma small

3.

//For Compact memory model

4.

#pragma compact

5.

//For large memory model

6.

#pragma large

Pointers in Keil C Pointers in keil C is are similar to that of standard C and can perform all the operations that are available in standard C. In addition, keil C extends the operatability of pointers to match with the 8051 Controller architecture. Keil C provides two different types of pointers: Generic Pointers Memory-Specific Pointers

Generic Pointers Generic Pointers are declared same as standard C Pointers as shown below: 1.

char *ptr;

//Character Pointer

2.

int *num;

//Integer Pointer

Generic pointers are always stored using three bytes. The first byte is the memory type, the second byte is the high-order byte of the offset, and the third byte is the low-order byte of the offset. Generic pointers maybe used to access any variable regardless of its location.

Memory-Specific Pointers Memory specific pointers are defined along with memory type to which the pointer refers to, for example: 1.

char data *c;

2.

//Pointer to character stored in Data memory

3.

4.

char xdata *c1;

5.

//Pointer to character stored in External Data Memory.

6.

7.

char code *c2;

8.

//Pointer to character stored in Code memory

As Memory-Specific pointers are defined with a memory type at compile time, so memory type byte as required for generic pointers is not needed. Memory-Specific pointers can be stored using 1 byte (for idata, data, bdata and pdata pointers) or 2 bytes (for code and xdata pointers). The Code generated by keil C compiler for memory-specific pointer executes mroe quickly than the equivalent code generated for a generic pointer. This is because the memory area accessed by the pointer is known at the compile time rather at run-time. The compiler can use this information to optimize memory access. So If execution speed is your priority then it is recommended to use memory-specific pointers. Generic pointers and Memory-Specific pointers can be declared with memory area in which they are to be stored. For example: 1.

//Generic Pointer

2.

char * idata ptr;

3.

//character pointer stored in data memory

4.

int * xdata ptr1;

5.

//Integer pointer stored in external data memory

6.

7.

//Memory Specific pointer

8.

char idata * xdata ptr2;

9.

//Pointer to character stored in Internal Data memory

10.

//and pointer is going to be stored in External data memory

11.

int xdata * data ptr3;

12.

//Pointer to character stored in External Data memory

13.

//and pointer is going to be stored in data memory

Functions in Keil C http://www.8051projects.net/wiki/Keil_Embedded_C_Tutorial#Writing_Hardware_specific_code

4/14

4/7/2015


Keil C compiler provides number of extensions for standarad C function declerations. These extensions allows you to: Specify a function as an interrupt procedure Choose the register bank used Select memory model

Function Declaration [Return_type] Fucntion_name ( [Arguments] ) [Memory_model] [reentrant] [interrupt n] [using n]

Return_type The type of value returned from the function. If return type of a function is not specified, int is assumed by default. Function_name Name of function Arguments Arguments passed to function

Optional Stuff These are options that you can specify along with function declaration. Memory_model: explicit memory model (Large, Compact, Small) for the function. Example: 1.

int add_number (int a, int b) Large

reentrant To indicate if the function is reentrant or recursive. This option is explained later in the tutorial. interrupt Indicates that function is an interrupt service routine. This option is explained later in the tutorial. using Specify register bank to be used during function execution. We have three register banks in 8051 architecture. These register banks are specified using number 0 for Bank 0 to 3 for Bank 3 as shown in example 1.

void function_name () using 2

2.

{

3.

//function uses Bank 2

4.

//function code

5.

}

Interrupt Service Routines A function can be specified as an interrupt service routine using the keyword interrupt and interrupt number. The interrupt number indicates the interrupt for which the function is declared as service routine. Following table describes the default interrupts:

8051 Interrupt vector As 8051 vendors create new parts, more interrupts are added. Keil C51 compiler supports interrupt functions for 32 interrupts (0-31). Use the interrupt vector address in the following table to determine the interrupt number.


5/14

4/7/2015


Interrupt vector The interrupt function can be declared as follows: 1.

void isr_name (void) interrupt 2

2.

{

3.

4.

}

// Interrupt routine code

Please make sure that interrupt service routines should not have any arguments or return type except void.

Reentrant Functions In ANSI C we have recursive function, to meet the same requirement in embedded C, we have reentrant function. These functions can be called recursively and can be called simultaneously by two or more processes. Now you might be thinking, why special definition for recursive functions? Well you must know how these functions work when they are called recursively. when a function is running there is some runtime data associated with it, like local variables associated with it etc. when the same function called recursively or two process calls same function, CPU has to maintain the state of function along with its local variables. Reentrant functions can be defined as follows: 1.

void function_name (int argument) reentrant

2.

{

3.

4.

}

//function code

Each reentrant function has reentrant stack associated with it, which is defined by startup.A51 file. Reentrant stack area is simulated internal or external memory depending upon the memory model used: Small model reentrant functions simulate reentrant stack in idata memory. Compant model reentrant functions simulate reentrant stack in pdata memory. Large model reentrant functions simulate reentrant stack in xdata memory.

Real-time Function Tasks Keil or C51 provides support for real-time operating system (RTOS) RTX51 Full and RTX51 Tiny. Real-time function task are declared using _task_ and _priority_ keywords. The _task_ defines a function as real-time task. The _priority_ keyword specify the priority of task. Fucntions are declared as follows: 1.

void func (void) _task_ Number _priority_ Priority

2.

{

3.

4.

}

//code

where: Number is task ID from 0 to 255 for RTX51 Full and 0 to 15 for RTX51 Tiny. Priority


6/14

4/7/2015


is priority of task. Real-time task functions must be declared with void return type and void argument list (say no arguments passed to task function).

Writing First C program in Keil Basic of a C program As we already discussed, Keil C is not much different from a normal C program. If you know assembly, writing a C program is not a problem, only thing you have to keep in mind is forget your controller has general purpose registers, accumulators or whatever. But do not forget about Ports and other on chip peripherals and related registers to them. In basic C, all programs have atleast one function which is entry point for your application that function is named as \"main\" function. Similarly in keil, we will have a main function, in which all your application specific work will be defined. Lets move further deep into the working of applications and programs. When you run your C programs in your PC or computer, you run them as a child program or process to your Operating System so when you exit your programs (exits main function of program) you come back to operating system. Whereas in case of embedded C, you do not have any operating system running in there. So you have to make sure that your program or main file should never exit. This can be done with the help of simple while(1) or for(;;) loop as they are going to run infinitely. Following layout provides a skeleton of Basic C program. 1.

void main()

2.

{

3.

//Your one time initialization code will come here

4.

while (1) {

5.

//while 1 loop

6.

//This loop will have all your application code

7.

//which will run infinitely

8.

}

9.

}

When we are working on controller specific code, then we need to add header file for that controller. I am considering you have already gone through "Keil Microvision" tutorial. After project is created, add the C file to project. Now first thing you have to do is adding the header file. All you have to do is right click in editor window, it will show you correct header file for your project. Figure below shows the windows context for adding header file to your c file.

Include Header file in Keil

Writing Hardware specific code In harware specific code, we use hardware peripherals like ports, timers and uart etc. Do not forget to add header file for controller you are using, otherwise you will not be able to access registers related to peripherals. Lets write a simple code to Blink LED on Port1, Pin1.


7/14

4/7/2015


1.

#include

2.

//header file for 89C51

3.

void main()

4.

{

5.

//main function starts

6.

unsigned int i;

7.

8.

//Initializing Port1 pin1

9.

P1_1 = 0; //Make Pin1 o/p

10.

11.

while (1) {

12.

//Infinite loop main application

13.

//comes here

14.

for(i=0;i<1000;i++)

15.

16.

17.

P1_1 = ~P1_1;

18.

//complement Port1.1

19.

//this will blink LED connected on Port1.1

20.

}

21.

}

; //delay loop

You can now try out more programs. "Practice makes a man perfect".

Writing C and Assembly together Interfacing C program to Assembler You can easily interface your programs to routines written in 8051 Assembler. All you need to do is follow few programming rules, you can call assembly routines from C and vice-versa. Public variables declared in assembly modules are available to your C program. There maybe several reasons to call an assembly routine like faster execution of program, accessing SFRs directly using assembly etc. In this part of tutorial we will discuss how to write assembly progarms that can be directly interfaced with C programs. For any assembly routine to be called from C program, you must know how to pass parameters or arguements to fucntion and get return values from a function.

Segment naming C51 compiler generates objects for every program like program code, program data and constant data. These objects are stored in segments which are units of code or data memory. Segment naming is standard for C51 compiler, so every assembly program need to follow this convention. Segment names include module_name which is the name of the source file in which the object is declared. Each segment has a prefix that corresponds to memory type used for the segment. Prefix is enclosed in question marks (?). The following is the list of the standard segment name prefixes:

C51 module prefix

Data Objects

Data objects are the variables and constants you declare in your C programs. The C51 compiler generates a saperate segment for each http://www.8051projects.net/wiki/Keil_Embedded_C_Tutorial#Writing_Hardware_specific_code

8/14

4/7/2015


Data objects are the variables and constants you declare in your C programs. The C51 compiler generates a saperate segment for each memory type for which variable is declared. The following table lists the segment names generated for different variable data objects. Data objects segment prefix

Data Segment Prefix

Program Objects Program onjects includes code generated for C programs functions by C51 compiler. Each function in a source module is assigned a separate code segment using the ?PR?function_name?module_name naming convention. For example, for a function name send_char in file name uart.c will have a segment name of ?PR?SEND_CHAR?UART. C51 compiler creates saperate segments for local variables that are declared within the body of a function. Segment naming conventions for different memory models are given in following tables:

Small model segment naming convention

Compact model segment naming convention

Large model segment naming convention Function names are modified slightly depending on type of function (functions without arguments, functions with arguments and reentrant functions). Following tables explains the segment names:


9/14

4/7/2015

Keil Embedded C Tutorial function segment naming convention

Advanced C programming Function Parameters C51 make use of registers and memory locations for passing parameters. By default C function pass up to three parameters in registers and further parameters are passed in fixed memory locations. You can disable parameter passing in register using NOREGPARMS keyword. Parameters are passed in fixed memory location if parameter passing in register is disabled or if there are too many parameters to fit in registers.

Parameter passing in registers C functions may pass parameter in registers and fixed memory locations. Following table gives an idea how registers are user for parameter passing.

parameter passing to functions Following example explains a little more clearly the parameter passing technique:

example parameter passing to functions

Parameter passing in Fixed Memory Locations Parameters passed to assembly routines in fixed memory lcoation use segments named ?function_name?BYTE All except bit parameters are defined in this segment. ?function_name?BIT Bit parameters are defined in this segment. All parameters are assigned in this space even if they are passed using registers. Parameters are stored in the order in which they are declared in each respective segment. The fixed memory locations used for parameters passing may be in internal data memory or external data memory depending upon the memory model used. The SMALL memory model is the most efficient and uses internal data memory for parameter segment. The COMPACT and LARGE models use external data memory for the parameter passing segments.

Fucntion Return Values http://www.8051projects.net/wiki/Keil_Embedded_C_Tutorial#Writing_Hardware_specific_code

10/14

4/7/2015


Function return values are always passed using CPU registers. The following table lists the possible return types and the registers used for each.

function return values

Example Following example shows how these segment and function decleration is done in assembler.


11/14

4/7/2015


1.

2.

;and called from any C program

;Assembly program example which is compatible

3.

;lets say asm_test.asm is file name

4.

name asm_test

5.

6.

;We are going to write a function

7.

;add which can be used in c programs as

8.

; unsigned long add(unsigned long, unsigned long);

9.

; as we are passing arguments to function

10.

;so function name is prefixed with '_' (underscore)

11.

12.

;code segment for function "add"

13.

?PR?_add?asm_test segment code

14.

;data segment for function "add"

15.

?DT?_add?asm_test segment data

16.

17.

;let other function use this data space for passing variables

18.

public ?_add?BYTE

19.

;make function public or accessible to everyone

20.

public _add

21.

22.

;define the data segment for function add

23.

rseg ?DT?_add?asm_test

24.

?_add?BYTE:

25.

parm1: DS 4

;First Parameter

26.

parm2: ds 4

;Second Parameter

27.

28.

;either you can use parm1 for reading passed value as shown below

29.

;or directly use registers used to pass the value.

30.

rseg ?PR?_add?asm_test

31.

_add:

32.

;reading first argument

33.

mov parm1+3,r7

34.

mov parm1+2,r6

35.

mov parm1+1,r5

36.

mov parm1,r4

37.

;param2 is stored in fixed location given by param2

38.

39.

;now adding two variables

40.

mov a,parm2+3

41.

add a,parm1+3

42.

;after addition of LSB, move it to r7(LSB return register for Long)

43.

mov r7,a

44.

mov a,parm2+2

45.

addc a,parm1+2

46.

;store second LSB

47.

mov r6,a

48.

mov a,parm2+1

49.

addc a,parm1+1

50.

;store second MSB

51.

mov r5,a

52.

mov a,parm2

53.

addc a,parm1

54.

;store MSB of result and return

55.

56.

;keil will automatically store it to

57.

;varable reading the resturn value

58.

mov r4,a

59.

ret

60.

61.

end


12/14

4/7/2015


Now calling this above function from a C program is very simple. We make function call as normal function as shown below: 1.

extern unsigned long add(unsigned long, unsigned long);

2.

3.

void main()

4.

{

5.

unsigned long a;

6.

a = add(10,30);

7.

//a will have 40 after execution

8.

while(1);

9.

}

Retrieved from "http://www.8051projects.net/mediawiki/index.php?title=Keil_Embedded_C_Tutorial&oldid=193 (http://www.8051projects.net/mediawiki/index.php?title=Keil_Embedded_C_Tutorial&oldid=193)" Category (/wiki/Special:Categories): How TOs (/wiki/Category:How_TOs)

 This page has been accessed 12,312 times.  This page was last modified on 6 April 2015, at 14:54.

(//www.mediawiki.org/)

(http://creativecommons.org/licenses/by-nc-sa/3.0/)Content is available under Creative Commons Attribution NonCommercial Share Alike (http://creativecommons.org/licenses/by-nc-sa/3.0/) unless otherwise noted.





Post A Question

Share A Project

Rickey's World © 2014  http://www.8051projects.net/wiki/Keil_Embedded_C_Tutorial#Writing_Hardware_specific_code

 

13/14

4/7/2015


Rickey's World © 2014

  


14/14

Keil Embedded C Tutorial.pdf

Recommend Documents