Nebosh Oil and Gas Possible Exam QuestionsDescription complète
INTERNATIONAL GENERAL CERTIFICATE IN OCCUPATIONAL HEALTH AND SAFETY
MOCK PAPER IGC2: CONTROL OF INTERNATIONAL WORKPLACE HAZARDS
1. An organisation uses small quantities of toxic chemicals (a) Identify FOUR possible routes of entry of toxic substances into the body
(4)
(b) Explain the Explain the difference between acute and chronic health effect
(4)
(c) Identify the sources of information which could be used in the assessment of risk of toxic substances.
(4)
(d) Outline the control measures that might be required in order to minimise risks to workers
(8)
2. A portable electric drill for use on a construction site needs periodic inspection and testing to ensure it is safe to operate. Identify the Identify the factors that would determine the frequency of the inspection and testing.
(8)
(a) Outline the term ‘respirable dust’.
(2)
(b) Outline the methods for measuring airborne dust in the workplace.
(6)
(a) Identify FOUR types FOUR types of ionising radiation. radiation.
(4)
(b) Outline the Outline the main control measures for ionising radiation.
(4)
5.
Identify EIGHT common causes of fires in the workplace.
(8)
6.
Identify the main hazards associated with demolition work.
(8)
7.
(a) Identify the Identify the elements of a hierarchy of control to minimise pollution from waste.
(4)
(b) Outline techniques Outline techniques which can be used to reduce the risk of environmental damage from spillage and leakage of liquid waste.
(4)
3.
4.
8.
Identify control measures to reduce the risk of accidents from reversing vehicles in the workplace. 9. A worker is manually loading boxes of components onto metal shelves.
(8)
(a) Identify FOUR types FOUR types of injury that the worker could suffer while carrying out this activity.
(4)
(b) Identify factors Identify factors in relation to the task that that will increase the risk of injury.
(4)
10. Identify EIGHT safe working practices that should be considered to reduce the risk when using a mobile tower scaffold.
(8)
11. (a) Identify FOUR hazards associated with the use of battery-powered fork lift trucks.
(4)
(b) Outline the control measures for EACH of the hazards identified in (a).