Product Overview
WinLink ™ 1000 Family High Capacity Carrier Class Radio Systems
Price Price & Per Perform forman ance ce Lea Leadersh dership ip in W ireles ireless s Br Broadb oadban and d
W inLink 1000 Family TM
High Capacity Carrier Class Radio Systems
RADWIN's WinLink ™ 1000 family of wireless
broadband products deliver carrier-class performance at the most competitive price in the market. WinLink ™ 1000products pack legacy TDMandEthernet services over the 2.3-2.5 GHz and 4.9-5.9 GHz spectrum bands, and are suitable for deployment in FCC, ETSI, UK and IC regulated countries. WinLink ™ 1000 products provide high capacity connectivity of up to 48 Mbps at distances of up to 80 Km/50 miles.The cost-effective solutions are extremely simple to install and maintain, and are up and running in less than an hour. RADWIN's WinLink ™ 1000 systems are ideally suited
to meet the needs of service providers and cellular carriers,enterprises and private networks requiring immediate deployment of affordable, carrier-class, long range and high capacity connectivity solutions. Available in multiple frequency bands and various configurations,all WinLink ™ 1000 products are highly robust, simple to install and extremely competitive.
Highlights High data rate, up to 48 Mbps Long range, up to 80 Km/50 miles Integrated solution for E1s/T1s +Ethernet Available in the following spectrum bands: 2.300-2.400 GHz 2.400-2.4835 GHz 4.940-4.990 GHz 5.150-5.350 GHz 5.470-5.725 GHz 5.725-5.850 GHz 5.865-5.935 GHz Compliant with FCC, ETSI, UK and IC regulations Complete SNMP based local and remote management, integrated with SNMPc
Key Benefits Industry proven solution; thousands of systems installed at leading carriers globally Compact integrated solution that is extremely simple to install and maintain Available in license exempt frequencies, thus removing regulatory overhead and delays High performance wireless links for sharply reduced costs compared to leased lines
Typical Applications Backhauling WinLink™ 1000 systems power a range of backhaul applications,including: Cellular backhauling Backhauling to access points (for metro WiFi deployments) Backhauling from points of presence (PoPs) of wireless ISPs to backbone network Broadband Access WinLink™ 1000 provides a broadband access solution, offering Ethernet and E1s/T1s services to end-users. Remote Sites Connectivity For enterprises and organizations with multiple sites,WinLink™ 1000 offers cost effective and transparent connectivity for LAN and PBX systems.
WinLink™ 1000
Configuration Architecture IDU to ODU Interface
Radio Frequency Bands
Data Rate Channel Bandwidth Duplex Technique Modulation MaxTx Power Received Dynamic Range Error Correction Encryption
Ethernet Interface Type Number of Ethernet Ports Framing/Coding Bridging Traffic Handling Data Latency Line Impedance VLAN Support Connector E1/T1 Interface Framing Number of E1/T1 Ports Standard Compliance Timing Line Code Latency Impedance Connector Jitter &Wander
Indoor Unit: IDU-E (Enterprise form-factor), IDU-C (Carrier form-factor) Outdoor Unit: ODU with integrated antenna, ODU for connection to external antenna Outdoor CAT-5e cable; Maximum cable length: 100m
2.300 – 2.400 GHz 2.400 – 2.4835 GHz 4.940 – 4.990 GHz 5.150 – 5.350 GHz 5.470 – 5.725 GHz 5.725 – 5.850 GHz 5.865 – 5.935 GHz Configurable up to 48 Mbps (bi-directional) 20 MHz; 5 / 10 / 20 MHz supported for some products TDD OFDM – BPSK/Q PSK/16QAM/64QAM Configurable up to 18/23 dBm >60 dB FEC; k=1/2,2/3,3/4 AES 128
10/100BaseT Interface with Auto-negotiation (IEEE 802.3) 1,2 IEEE 802.3/U Self-learning up to 2047 MAC addresses IEEE 802.1Q MAC layer bridging, self-learning 3 msec (typical) 100 Transparent RJ-45
Unframed (transparent) 0, 1, 2, 4 ITU-T G.703, G.826 Independent Tx and Rx timing E1:HDB3 @ 2.048 Mbps T1: B8ZS/AMI @ 1.544 Mbps 8 msec (typical) E1-120 , balanced T1-100 , balanced RJ-45 According to ITU-T G.823, G.824
ODU
IDU-E
IDU-C
Management Protocol Network Management Upgrade Capabilities Diagnostics Mechanics ODU Dimensions (includes 1ft flat integrated antenna) ODU Dimensions (integrated antenna not included) IDU-E Dimensions IDU-C Dimensions
SNMP based Supports SNMPc and HPOV Local and remote software upgrades Local and remote loopback testing
30.5cm(W) x 5.8cm(D) x 30.5cm(H) Weight: 1.5kg/3.3lbs 13.5cm(W) x 4.0cm(D) x 24.5cm(H) Weight: 1.0kg/2.2lbs 23.5cm(W) x 16.5cm(D) x 4.5cm(H) Weight: 0.5kg/1.1lbs 43cm(W ) x 29cm(D) x 4.5cm(H) Weight: 1.5kg/3.3lbs
Power and Mounting Power Feeding Power Consumption
100-240VAC, 50/60 Hz; -24 VDC; -48 VDC ODU with IDU-E,10W max ODU with IDU-C , 14W max Pole andWall
Mounting
Environmental Outdoor Unit Enclosure ODU OperatingTemperatures IDU OperatingTemperatures Humidity
All weather cases -350C - 600C / -310F - 1400F -50C - 450C / 230F - 1130F ODU - Up to 100%non-condensing IDU - Up to 90%non-condensing
Antennas 2.x GHz
4.x GHz
InegratedAntenna 1ft 16dBi Gain 200 BeamWidth Linear Polarization External Antenna 2ft 24dBi Gain 80 BeamWidth Linear Polarization * Additional antennas are available upon request
5.x GHz 22dBi 90 Linear
27dBi 4.50 Linear
28dBi 4.50 Linear
Regulation Radio FCC: 47CFR IC ETSI UK Safety TUV CAN-CSA EMC FCC ETSI CAN-CSA Environmental ETSI
2.400-2.4835 GHz
4.940-4.990 GHz
5.150-5.350 GHz
Part 15, Subparts C&B RSS-210 EN 300 328
Part 90 & Part 15, Subpart B
Part 15, Subpart E RSS-210 EN 301 893
5.470-5.725 GHz
RSS-210 EN 301 893
5.725-5.850 GHz Part 15, Subparts C&B RSS-210 2107: 2003
60950, According to UL 60950 C22.2 No.60950 CFR47 Class B, Part15, Subpart B EN 300 386,EN 301 489-4, EN 301 489-1, EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 CAN/CSA-CEI/IEC: CISPR 22-02 IEC 60721-3-4 Class 4M5 IP67
Radwin Ltd. 27 Habarzel St.,Tel-Aviv 69710, Israel Tel:+972-3-7662917 Fax: +972-3-7662918 www.radwin.com
Email:
[email protected]
