RNC Internal System Parameter-TIMERVALUES

Class_MO ArpMap CchFrameSynch CchFrameSynch CellUpdate ChannelSwitching ChannelSwitching ChannelSwitching ChannelSwitching ChannelSwitching ChannelSwitching Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc Cpc CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq CpmTransGapPattSeq DchFrameSynch DchFrameSynch DchFrameSynch DchFrameSynch Fach Fach

Param_name systemDefaultArpQosEo tProcRncDl tProcRbsDl rrcTcuc pendingTimeAfterTrigger thpReportInterval filteringCoefficient repeatTimer allowSwitchToCommon inactivityTimerDch ueDtxCycle1 ueDtxCycle2 macDtxCycle ueDpcchBurst1Tti2 ueDpcchBurst2Tti2 ueDpcchBurst1Tti10 ueDpcchBurst2Tti10 inactivityThreshUeDtxCycle2Tti2 inactivityThreshUeDtxCycle2Tti10 ueDtxLongPreambleLength macInactivityThresh cqiDtxTimer ueDrxCycle inactivityThreshUeDrxCycle inactivityThreshUeGrantMonTti2 inactivityThreshUeGrantMonTti10 ueDrxGrantMonitoring ueDtxDrxOffsetTti2 ueDtxDrxOffsetTti10 enablingDelay cpcProfileOverride tGSN tGL1 tGL2 tGPL1 tGPL2 tGPRC tGD downLinkFrameType nIdentifyAbort tReconfirmAbort tgcfnOffset tProcRncDl tProcRbsDl tProcRncUl tProcRbsUl fach1RateMatchingAttrDl fach2RateMatchingAttrDl

Ericsson_Constant YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES

Fach Fach Fach Fach Handover Handover Handover Handover Handover Handover Handover Handover Handover Handover Handover IubLink IurLink IurLink Mbms Mbms Mbms Mbms Mbms Paging Pch PositioningServiceClass PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl

sccpchPunctureLimit tfcs fach1RateMatchingAttrDlTdd fach2RateMatchingAttrDlTdd maxBufferTime timeRelocprep timeRelocoverall timeRelocsup tCellChange initialCellListDelay comprModeRetryInterv maxSohoListSubset tsHoInIratHo tmStopIfMeas batonHoSupport tpcPattern01CountDl synchTimeout synchRetransmissions mbmsModificationPeriodCoeff mbmsRepetitionPeriodCoeff nonPlSessionsMax plSessionsMax neighbourCellsMax bcchModCycleLength pichMode positioningServiceClassInstId betaPrachControlTf0 betaPrachControlTf1 betaPrachDataTf0 betaPrachDataTf1 reportPeriodicity hysteresisSiUpdate maxAdjustmentStep adjustmentPeriod adjustmentRatio codePowerPeriod ulSirGuard sirErrorReportHyst sirEstFilter sirIncreaseMask blerCorrectionFactor transmittedCodePowerFilter rtwpFilter deltaSir1 deltaSirAfter1 deltaSir2 deltaSirAfter2 itp rpp sirErrorMode

YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES

PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl PowerControl RabHandling Rach RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncFunction RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters RncSystemParameters Rrc Rrc Rrc Rrc

cCM gainFactorCLow gainFactorDLow gainFactorCHigh gainFactorDHigh gainFactorCExtraHigh gainFactorDExtraHigh sirIncreaseMaskTti2 initDlTransPowerDefault prxDpchDesDefault tpcStepSize pwrEstFact1 pwrEstFact2 pwrEstFact3 eulMinHwSchRate preambleThreshold gpehStorageSize recordingStorageSize loadSharingThreshold hsCellChangeCfnOffset hsMacdSwitchTimeOffset eulBufferEmptyTimeThreshold edchTciIntervalMin hsIubDrtExtensionInterval hsMissingCaSupervisionTime hsMissingCaReduction edchSoftCongThreshold maxBlockedPreambSignatures preambleThresholdIncrRachCov tRrcChSwitch1 tRrcChSwitch3 tNbapRnsapChSwitch4 tRrcEst1 tRrcRel1 tRrcRel2 tNbapRlSetupIub tRnsapRlSetupIur tNbapSynchRlReConfig2 tRnsapSynchRlReConfig1 tRrcRABEst tRrcRABRel tRrcActiveSetUpdate tNbapRlAdd tRnsapRlAdd hsWaitMeasRepT ueRcVersion t300 t302 t308 t317


Rrc Rrc Rrc Rrc Rrc Rrc Rrc Rrc Rrc Rrc Rrc SduFormat SduFormat SecurityHandling Sid Subflow Subflow Subflow Subflow Subflow Subflow UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeMeasControl UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType

n300 n302 n308 t309 n313 n315 t307 t316 t313 cfnOffsetSrbDchDl cfnOffsetSrbHs sduSize formatContext cipheringGuardTime cnInformation subflowNumber sduDelivery sduErrRatioMan sduErrRatioExp resBitErrRatioMan resBitErrRatioExp asCellSyncInfoRepInd dsCellSyncInfoRepInd msCellSyncInfoRepInd triggerCondTwo1a amountOfReporting1a maxNumberRepCells1a triggerCondOne1b amountOfReporting1c maxNumberRepCells1c readSfnInd gsmTimeDiffRepInd maxNumberRepCells1d maxNumberRepCells3a measQuant6 cellSyncInfoRepInd4_2b ueAutoUpdateMode4_2b maxNumbRepCells4_2b utranThresh3aForcedGsm rachSfnSfnTimeDiffRepInd utranThresh3aForcedGsmTdd trafficClass assymetryInd maxBitRateDl maxBitRateUl maxSduSize transferDelay trafficHandlingPriority sourceStatisticsDescriptor ingressBitRateAverage


UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRabType UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRc UeRcEdchFlow UeRcEdchFlow UeRcEdchFlow UeRcEdchFlow UeRcEdchFlow UeRcEdchGainFactors UeRcEdchGainFactors UeRcEdchGainFactors UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcHsdsch UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl

ingressBitRatePeak egressBitRateAverage egressBitRatePeak ingressSscsSduSizeAverage ingressSscsSduSizePeak egressSscsSduSizeAverage egressSscsSduSizePeak iucInitTimer noIucInitRep rabType guaranteedBitRateDl guaranteedBitRateUl startCfnOffset stopCfnOffset gsmHoAllowed rcState ifhoAllowed resService preferredCpmMethUl preferredCpmMethDl connectionCapability ganHoAllowed resServiceTdd mmtel referenceTFC macdPowerOffset harqTransmUlTarget transmissionGrantType t1eTimerUl rbType edpdchGainFactorUl referenceEtfci tfInd macHsWindowSize discardTimer timerT1 macHsReorderingBufferSize rbType priorityQueueId schedulingPriorityIndicator dpchTdm2Dl dpchTdm4Dl spreadingFactor dpchSlotFormat tfciPresenceIndicator noTfc fixFlexPosition noPilotBits secondInterleaveMode ccTrChId


UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChDl UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChEdch UeRcPhyChTfc UeRcPhyChTfc UeRcPhyChTfc UeRcPhyChTfc UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcPhyChUl UeRcRab UeRcRab UeRcRab UeRcRab UeRcRab UeRcRab UeRcRab

modulation noChCodesPerTimeSlot noTimeSlots otherTimeSlotFormat punctureLimit repetitionLength repetitionPeriod dpchOffsetValue tfciCoding tstdIndicator edpcchGainFactorUl edchMinimumSetEtfci puncturingLimitUl tti etfciTableIndex eulTtiBudgetSrb eulTtiBudgetNonSchSip eulTtiBudgetScheduledFlows eulMuxOption edpdchGainFactorMinReduced ctfc rcTfi tfcId ulDlSelector spreadingFactor dpcchSlotFormat tfciPresenceIndicator noTfc punctureLimit secondInterleaveMode ccTrChId dpchSlotFormat modulation noChCodesPerTimeSlot noTimeSlots otherTimeSlotFormat repetitionLength repetitionPeriod specialBurstScheduling dpchOffsetValue tfciCoding ulSynchStepFreq ulSynchStepSize rbType egressBitRateAverage egressBitRatePeak egressSscsSduSizeAverage egressSscsSduSizePeak ingressBitRateAverage ingressBitRatePeak


UeRcRab UeRcRab UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRb UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc

ingressSscsSduSizeAverage ingressSscsSduSizePeak rbType rlcLogChType rlcMode rncTimerPoll rncTimerStatusProhibit rncLastPduInTransmPoll rncLastPduInReTransmPoll rncMissingPduIndicator rncTransmissionWindowSize rncReceivingWindowSize rncInSequenceDelivery rncMaxDat rncMaxRst rncTimerRst rncTimerPollProhibit rncPollSdu rncPollWindow rncPollPdu ueSduDiscardMode ueMaxDat ueTransmissionWindowSize ueTimerRst ueMaxRst ueTimerPollProhibit ueTimerPoll ueLastTxPduPoll ueLastReTxPduPoll ueInSequenceDelivery ueReceivingWindowSize ueTimerStatusProhibit ueMissingPduIndicator uePollSdu uePollPdu uePollWindow trChId logChMux trChTypeDl trChTypeUl rbUser logChId logChPriority rbId rlcUserType maxMacdPduSizeExtended rncMaxDat rncMaxRst rncPollWindow rncReceivingWindowSize


UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRbRlc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcRrc UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh

rncTimerPoll rncTimerRst rncTimerStatusProhibit rncTransmissionWindowSize ueMaxDat ueMaxRst uePollWindow ueReceivingWindowSize ueTimerPoll ueTimerRst ueTimerStatusProhibit ueTransmissionWindowSize ingressBitRateAverage ingressBitRatePeak egressBitRateAverage egressBitRatePeak ingressSscsSduSizeAverage ingressSscsSduSizePeak egressSscsSduSizeAverage egressSscsSduSizePeak trChType trChId rbType dchFpId frameHandlingPriority payloadCrcPresenceIndicator ulFpMode noTfDl sizeOfTbTf0Dl noOfTbTf0Dl sizeOfTbTf1Dl noOfTbTf1Dl sizeOfTbTf2Dl noOfTbTf2Dl sizeOfTbTf3Dl noOfTbTf3Dl sizeOfTbTf4Dl noOfTbTf4Dl sizeOfTbTf5Dl noOfTbTf5Dl ttiDl chCodingTypeDl chCodingRateDl crcSizeDl noTfUl sizeOfTbTf0Ul noOfTbTf0Ul sizeOfTbTf1Ul noOfTbTf1Ul sizeOfTbTf2Ul


UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UeRcTrCh UtranCell UtranCell UtranCell UtranCell UtranCell UtranCell UtranCell UtranCell UtranCell UtranCell

noOfTbTf2Ul sizeOfTbTf3Ul noOfTbTf3Ul sizeOfTbTf4Ul noOfTbTf4Ul sizeOfTbTf5Ul noOfTbTf5Ul ttiUl chCodingTypeUl chCodingRateUl crcSizeUl maxTfSubset dlQeSelector noOfTbTf6Dl noOfTbTf6Ul noOfTbTf7Dl noOfTbTf7Ul noOfTbTf8Dl noOfTbTf8Ul noOfTbTf9Dl noOfTbTf9Ul sizeOfTbTf6Dl sizeOfTbTf6Ul sizeOfTbTf7Dl sizeOfTbTf7Ul sizeOfTbTf8Dl sizeOfTbTf8Ul sizeOfTbTf9Dl sizeOfTbTf9Ul cmcBitsPerSlot dchCombIndicator pwrCongFilter txInterval txFilter fPwrUp fPwrDown tfsFlexConstant intCongFilter congDlInterval congTimeOut pwrEstFact

YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES YES

Default_v Parameter_D alue escription System default ARP values used when the ARP mapping feature is not activated through its Rn 1 to 30 1 Buffering/processing time in the RNC for a FACH/PCH data frame on the downlink. Part of the 1 to 30 5 Buffering/processing time in the RBS for a FACH/PCH data frame on the downlink. Part of the 0 to 80 10 Timer for supervision of the response to CELL UPDATE CONFIRM.This attribute may only be ch 0 to 6 1 Time after a channel switch is requested, after which the next measurement report may be se 1 to 20 5 Averaging period of the UL and/or DL throughput measurement.This attribute may only be ch 0 to 9 11 13 17 19 6 Filtering coefficient of the code power measurements.This attribute may only be changed by E 0 to 40 4 Time between repeated requests to downswitch a downlink radio bearer on DCH with bad cov 0 to 1 1 Controls whether it is allowed to switch the radio connection from a dedicated transport chan 0 to 1000 30 Time after which an IU RELEASE REQUEST message is sent to the core network, for UEs that on 1 4 5 8 10 16 20 20 Number of subframes in the uplink DPCCH pattern in DTX cycle 1.This attribute may only be ch 4 5 8 10 16 20 32 40 64 80 128 160 20 Number of subframes in the uplink DPCCH pattern in DTX cycle 2.This attribute may only be ch 1 4 5 8 10 16 20 5 Length of the MAC DTX cycle.This attribute may only be changed by Ericsson personnel.Chang 125 2 Number of subframes in the uplink DPCCH burst in DTX cycle 1 for EUL 2ms TTI.This attribute m 125 2 Number of subframes in the uplink DPCCH burst in DTX cycle 2 for EUL 2ms TTI.This attribute m 125 5 Number of subframes in the uplink DPCCH burst in DTX cycle 1 for EUL 10ms TTI.This attribute 125 5 Number of subframes in the uplink DPCCH burst in DTX cycle 2 for EUL 10ms TTI.This attribute 1 4 8 16 32 64 128 256 1 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE shall im 1 4 8 16 32 64 128 256 1 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE shall im 2 4 15 4 Number of slots in the long preamble associated with DTX cycle 2 Note, when this parameter 0 1 2 4 8 16 32 64 128 256 512 2 Number of consecutive E-DCH TTIs without an E-DCH transmission, after which the UE E-DCH -1 0 1 2 4 8 16 32 64 128 256 5122 Number of subframes after an HS-DSCH reception during which the CQI reports have higher p 4 5 8 10 16 20 5 Length of the HS-SCCH reception pattern in subframes.This attribute may only be changed by 0 1 2 4 8 16 32 64 128 256 512 2 Number of subframes after an HS-SCCH reception or after the first slot of an HS-PDSCH recept 0 1 2 4 8 16 32 64 128 256 16 Number of TTIs after an E-DCH transmission during which the UE shall monitor the E-AGCH tra 0 1 2 4 8 16 32 64 128 256 4 Number of TTIs after an E-DCH transmission during which the UE shall monitor the E-AGCH tra FALSE Determines whether the UE is required to monitor the E-AGCH and the E-RGCH when the sub 0 to 159 2 Offset of the DTX and DRX cycles compared to the CFN for E-DCH 2ms TTI.This attribute may o 0 to 159 0 Offset of the DTX and DRX cycles compared to the CFN for E-DCH 10ms TTI.This attribute may 0 1 2 4 8 16 32 64 128 128 Number of radio frames during which the UE shall send DPCCH continuously after (re)configur OFF Parameter to determine whether the pre-defined hardcoded parameter set(profile) is used or 0 to 14 4 Transmission gap starting slot number. A transmission gap pattern begins in a radio frame, con 3 to 5 7 10 14 7 Transmission gap length 1. Number of slots in the first transmission gap within the transmissio 3 to 5 7 10 14 7 Transmission gap length 2. Number of slots in the second transmission gap within the transmi 3 4 8 12 15 23 24 35 Transmission gap pattern length 1. Number of frames in transmission gap pattern 1.This attrib 3 4 8 12 15 23 24 35 Transmission gap pattern length 2. Numer of frames in transmission gap pattern 2.This attribu 0 to 511 0 Transmission gap pattern repetition count. Number of transmission gap patterns within the tr 15 to 269 0 0 Transmission gap start distance. Number of slots between the starting slots of two consecutiv 0 to 1 0 Frame structure type used in downlink compressed mode control. This attribute may only be c 1 to 128 66 Maximum number of pattern repeats that the UE shall use to attempt to decode the unknown 1 to 20 11 Maximum time allowed for the re-confirmation of the BSIC of a GSM cell in the BSIC re-confirm 0 to 255 Offset to the transmission gap connection frame number, for the pattern sequence when star 1 to 30 Buffering/processing time for a downlink DCH data frame in RNC.This attribute may only be ch 1 to 30 Buffering/processing time for a downlink DCH data frame in RBS.This attribute may only be ch 1 to 30 Buffering/processing time for an uplink DCH data frame in RNC.This attribute may only be cha 1 to 30 Buffering/processing time for an uplink DCH data frame in RBS.This attribute may only be cha 1 to 256 220 Rate matching attribute in downlink for Fach1.The Fach1 is used for logical channels BCCH, CC 1 to 256 130 Rate matching attribute in downlink for Fach2.The Fach2 is used for logical channel DTCH, traf Range

0 to 15 1 to 256 1 to 256 0 to 50 1 to 120 1 to 30 1 to 60 1 to 30 0 to 60 0 to 50 1 to 32 1 to 10 0 to 60 0 to 30 1 to 10 1 to 10 7 to 10 0 to 3 0 to 20 0 to 10 0 to 32 6 to 9 18 36 72 144 0 to 15 0 to 15 0 to 15 0 to 15 1 to 6000 30 to 60 1 to 10 1 to 256 0 to 100 1 to 6000 0 to 20 10 to 6000 0 to 9 11 13 15 17 19 0 to 10 1 to 10 0 to 9 11 13 15 17 19 0 to 9 11 13 15 17 19 0 to 30 0 to 30 0 to 30 0 to 30 0 to 1 0 to 1 0 to 3

5 Maximum amount of puncturing for common channels.Value mapping:0: 40 %1: 44 %2: Configuration of elements used to build the Transport Format Combination Set (TFCS) for PCH 200 Rate matching attribute in the downlink for the first FACH. The first FACH is used for logical ch 110 Rate matching attribute in the downlink for the second FACH. The second FACH is used for log 10 Maximum time in buffer for a buffered report. This attribute may only be changed by Ericsson 10 Maximum time for resource allocation in the target system. This attribute may only be chang 5 Maximum time to complete a handover.This attribute may only be changed by Ericsson perso 15 Maximum time for relocation in the target RNC. This attribute may only be changed by Ericsso 20 Time for supervising the "move" from UTRAN to GSM.Once the cell change order from UTRAN 0 When the connection is set up for the first time, Measurement handler function will wait this 5 Time interval between trials to initiate compressed mode. This attribute may only be changed 32 Maximum number of intra-frequency cells that the UE shall measure on. This attribute may on 2 Maximum time during which soft or softer handover may be triggered during IRAT-HO execut 20 Time for Supervision for measurements started due to Inter-frequency Load based handover.U FALSE Controls whether Baton Handover is supported for Intra-RNC Hard Handover.This attribute m 8 Downlink TPC pattern transmitted for the first RLS, until uplink initial synchronization is achiev 2 DL/UL Synchronization control frame timeout value.This attribute may only be changed by Eri 2 Number of re-transmissions when sending a DL/UL Synchronization control frame.This attribu 9 Represents m, the modification period coefficient. The actual modification period (MP), in nu 2 Represents r, the repetition period coefficient. The number of repetitions per modification pe 20 Maximum number of simultaneous ongoing MBMS sessions in one non-PL cell. The MCCH FAC 10 Maximum number of simultaneous ongoing MBMS sessions in one PL cell. The MCCH FACH w 20 Maximum number of intra-frequency neighboring cells for which information is sent on MCCH 9 BCCH modification cycle length coefficient (k). The cycle length is calculated as the k'th potent 18 Number of paging indications per frame in the PICH.This attribute may only be changed by Eri ID of the service class.This attribute may only be changed by Ericsson personnel. Filter: FDD 11 Beta value (gainFactor) for RACH control part, TFC 0.This attribute may only be changed by Eri 10 Beta value (gainFactor) for RACH control part, TFC 1.This attribute may only be changed by Eri 15 Beta value (gainFactor) for RACH data part, TFC 0.This attribute may only be changed by Ericss 15 Beta value (gainFactor) for RACH data part, TFC 1.This attribute may only be changed by Ericss 1000 Report periodicity (RTWP period) for RBS common measurements.This attribute may only be c 30 If the difference between reported power measurement and the power value transmitted in S 1 Maximum adjustment step for downlink power balancing.This parameter is signaled over NBA 8 Adjustment period for downlink power balancing.This attribute may only be changed by Ericss 0 Adjustment ratio for downlink power balancing.This attribute may only be changed by Ericsso 200 Measurement period for downlink power balancing.This attribute may only be changed by Eri 2 Defines the range used when determine when a SIR error measurement report shall be sent fr 60 Defines the hysteresis used to determine when a SIR error measurement report shall be sent 0 Measurement filtering coefficient used to determine when a SIR error measurement report sh 4 Time that subsequent "SIR target up" commands are ignored after a successful "SIR target up" 8 The jump algorithm typically gives a result that is slightly biased towards increased BLER. This 4 Measurement Filter Coefficient for Transmitted Code Power measurement used for downlink 9 Filter coefficient for received total wideband power measurement. This attribute may only be 10 Delta in UL SIR target value during the frame containing the start of the first transmission gap 5 Delta in UL SIR target value during the frame after the frame containing the start of the first tr 10 Delta in UL SIR target value during the frame containing the start of the second transmission g 5 Delta in UL SIR target value during the frame after the frame containing the start of the secon 0 Mode of transmission power of the uplink DPCCH at the first slot after transmission gap. This a 1 Mode of step size during recovery period. This attribute may only be changed by Ericsson pers 2 Used to determine which SIR error measurements shall be initiated.This attribute may only be

0 to 20 4 0 to 15 11 0 to 15 15 0 to 15 8 0 to 15 15 0 to 15 5 0 to 15 15 0 to 10 4 -350 to 150 -50 -120 to -58 -90 1 to 3 1 0 to 100 100 0 to 100 80 0 to 100 80 0 to 6016 32 0 to 72 34 0 to 100000 100000 0 to 60000 60000 0 to 100 20 0 to 255 50 0 to 100 5 2 10 20 50 100 200 500 1000 50 0 to 1000 250 50 to 200 0 100 10 to 150 0 33 1 to 100 50 1 to 100 66 2 to 4 4 -360 to 0 -190 1 to 30 15 1 to 30 5 1 to 30 4 1 to 30 3 1 to 30 1 1 to 30 1 1 to 30 3 1 to 30 4 1 to 30 3 1 to 30 4 1 to 30 5 1 to 30 6 1 to 30 5 1 to 30 3 1 to 30 4 0 to 5000 750 0 to 128 0 to 14 10 0 to 14 5 40 80 160 320 40 0 10 30 60 180 600 1200 1800 180

Used to adjust the reference power for users in compressed mode during DL power balancing Reference gain factor (generic beta value) for the uplink DPCCH part of RABs (or SRB) with a m Reference gain factor (generic beta value) for the uplink DPDCH part of RABs (or SRB) with a m Reference gain factor (generic beta value) for the uplink DPCCH part of RABs (or SRB) with a m Reference gain factor (generic beta value) for the uplink DPDCH part of RABs (or SRB) with a m Reference gain factor (generic beta value) for the uplink DPCCH part of RABs (or SRB) with a m Reference gain factor (generic beta value) for the uplink DPDCH part of RABs (or SRB) with a m Time that subsequent "SIR target up" commands are ignored after a successful "SIR target up" Default initial downlink transmission power, used when the PCCPCH RSCP or downlink time slo Default initial desired received uplink DPCH power value, used when the uplink time slot ISCP Step size for power adjustment.This attribute may only be changed by Ericsson personnel.Uni First decay factor for the downlink power estimation decay used by Admission Control.This at Second decay factor for the downlink power estimation decay used by Admission Control.This Third decay factor for the downlink power estimation decay used by Admission Control.This a The pre-allocated hardware rate for scheduled data for E-DCH users in the RBS. Needed for RB The threshold for preamble detection, relative to the interference level. This attribute may on Total GPEH storage size available on the O&M MP and each Module MP.When gpehStora Total size of the storage space available for PM Recording ROP files on the O&M MP.Whe Threshold below which RRC redirections for inter-frequency load sharing will be inhibited. De Offset in number of frames calculated from the activation time at serving HS-DSCH Cell Chang Used when calculating the time for the switch-over of the HS MAC-D flow from Source Cell to The UE shall send an unhappy bit if it takes the UE more than this time to empty its buffer wit Defines the minimum interval between two consecutive TNL CONGESTION INDICATION contro Minimum time interval between two HS-DSCH Data Frames with a DRT Extension. The purpos Time without a received CAPACITY ALLOCATION (CA) control frame, for this PQF, that results i Defines the degree of bit rate reduction due to missing CAPACITY ALLOCATION control frames Starting point for the soft congestion detection. This point is the shortest dynamic delay that c Maximum number of preamble signatures that can be blocked in a cell.This attribute may only Indicates the preamble threshold to be used when the feature Increased RACH Coverage is ac Started at transmission of RRC: RADIO BEARER RECONFIGURATION. Stopped at reception of R Started at transmission of RRC: TRANSPORT CHANNEL RECONFIGURATION or RADIO BEARER R Started at transmission of DEDICATED MEASUREMENT INITIATION REQUEST. Stopped at recep Started at transmission of RRC CONNECTION SETUP to UE. Stopped at reception of RRC CONN Started at transmission of RRC CONNECTION RELEASE to UE in state CELL_DCH. Stopped at rec Started at transmission of RRC CONNECTION RELEASE to UE in state CELL_FACH. Stopped at re Timer used to supervise the NBAP Radio Link Setup procedure. Started at transmission of NBA Timer used to supervise the RNSAP Radio Link Setup procedure. Started at transmission of RN Waiting time for RADIO LINK RECONFIGURATION READY (Iub).Unit: sThis attribute may only b Waiting time for RADIO LINK RECONFIGURATION READY (Iur).Unit: sThis attribute may only be Waiting time for RRC RESPONSE.Unit: sThis attribute may only be changed by Ericsson person Started at transmission of RRC: RADIO BEARER RELEASE or RADIO BEARER RECONFIGURATION Timer used to supervise the RRC Active Set Update procedure. Started at transmission of RRC Timer used to supervise the NBAP Radio Link Addition procedure. Started at transmission of N Timer used to supervise the RNSAP Radio Link Addition procedure. Started at transmission of Maximum waiting time for a Measurement Report from the UE.Unit: msResolution: 250This a Provides the possibility to record script version run on the node. The value is not used by the R Time for supervision of RRC Connection Setup.Used by the UE.This attribute may only be chan Maximum time between UE transmission of Cell Update message and UE reception of the Cel Started at UE transmission of the RRC Connection Release Complete message. Set in SIB 1.Thi Maximum time for moving from CELL_FACH to idle mode if "out of service area". Used by Rel

0 to 7 5 0 to 7 6 1 to 8 1 1 to 8 6 1 2 4 10 20 50 100 200 100 1 50 100 200 400 600 800 1000 1 5 10 15 20 30 40 50 30 0 10 20 30 40 50 30 0 to 15 3 0 to 255 18 0 to 255 8

5 to 200 0 to 2 1 to 3 0 to 2 1 to 9 1 to 6 1 to 9 1 to 8 0 to 1 0 to 1 0 to 1 245 0 to 7 1 to 6 0 to 7 1 to 6 0 to 1 0 to 1 1 to 6 1 to 12

1 to 6 -24 to 0 0 to 2 -115 to -25

Maximum number of retransmissions of RRC Connection Request.Used by the UE.This attribu Maximum number of retransmissions of Cell Update.Used by the UE.This attribute may only b Maximum number of retransmissions of the RRC connection release complete message.Used UE timer that is controlled by UTRAN and sent to the UE in system information. This attribute Number of frames to be considered for out-of-sync detection (UE in DCH).This attribute may o Number of frames to be considered for in-sync detection (UE in DCH)This attribute may only b Waiting time before moving to idle (UE in PCH or FACH)This attribute may only be changed by Waiting time before starting T317 (UE in PCH)This attribute may only be changed by Ericsson p Waiting time before "RL Failure" (UE in DCH).This attribute may only be changed by Ericsson p The TTI Alignment (UL and 2*DL) and UE Processing delay in number of radio frames added to TTI alignment and UE Processing delay in number of radio frames added to the activation time Subflow size (TB size).This attribute may only be changed by Ericsson personnel. Unit: bit Applicable when more than one SDU Format exists per subflow and more than one subflow ex 80 Guard time for start of ciphering in RLC-TM.This attribute may only be changed by Ericsson pe System Information should be distributed about these CNs. This attribute may only be change Identifies which subflow this MO instance relates to. This attribute may only be changed by Er Indicates if erroneous SDUs shall be delivered or not.This attribute may only be changed by Er Mantissa part of SDU Error Ratio.This attribute may only be changed by Ericsson personnel. Exponent part of SDU Error Ratio.This attribute may only be changed by Ericsson personnel. Mantissa part of Residual Bit Error Ratio.This attribute may only be changed by Ericsson perso Exponent part of Residual Bit Error Ratio.This attribute may only be changed by Ericsson perso 1 Indicates if cell synchronization information shall be reported for cells in the active set. This at 1 Cell synch information report indicator. Indicates if cell synchronization information shall be r 1 Indicates if cell synchronization information shall be reported for the cells in the monitored se 5 Indicates which set of the cells shall be used in event 1a reporting evaluation. This attribute m 7 Number of reports when UE has reverted to event-triggered periodical reporting due to 'cell a 3 Maximum number of cells included in the report for event 1a. This attribute may only be chan 1 1 Specify the set of cells that shall be used in event 1b reporting evaluation. This attribute may o 7 Maximum number of periodic reports at event-triggered periodic reporting for event 1c. This 3 Maximum number of cells included in the report for event 1c. This attribute may only be chan 1 Indicates if reading of SFN is required for the target cell. This attribute may only be changed b 0 Indicates whether GSM observed time difference shall be reported for GSM cells. This attribut 1 Maximum number of cells included in the report for event 1d. This attribute may only be chan 4 Maximum number of cells included in the report for event 3a.This attribute may only be chan UE_TRANSMITTED_POWER Measurement quantity for UL connection quality reporting evaluation, for event 6a and 6b.Th FALSE Indicates if cell synchronization information shall be reported for cells in the Virtual Active Set ON_WITH_NO_REPORTING Indicates if UE autonomous update of the Virtual Active Set(s) shall be done or not, for measu 2 Maximum number of cells per reported non-used frequency included in the report for measur 0 UTRAN threshold for event 3a for Service/Load Based GSM Handover measurements using me 0 SFN-SFN observed time difference reporting indicator.This attribute may only be changed by E -25 UTRAN threshold for event 3a for Service Based GSM Handover measurements using measure Traffic class for the RAB type. Defines the type of an application for which the RAB is optimize RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. Value ma Maximum bit rate in downlink direction.Use of value is based on the RAB asymmetry indicator Maximum bit rate in uplink direction.Use of value is based on the RAB asymmetry indicator.Th Maximum SDU size.This attribute may only be changed by Ericsson personnel. Unit: bit Transfer delay. Indicates maximum delay for 95th percentile of the distribution of delivered S Traffic handling priority.This attribute may only be changed by Ericsson personnel. Specifies the characteristics of the source of submitted SDUs.This attribute may only be chang Ingress bit rate average. Traffic descriptor parameter for the connection between the RNC an

Ingress bit rate peak. Traffic descriptor parameter for the connection between the RNC and C Egress bit rate average. Traffic descriptor parameter for the connection between the RNC and Egress bit rate peak. Traffic descriptor parameter for the connection between the RNC and CN Ingress SsCs SDU Size Average. Traffic Descriptor parameter for the connection between the Ingress SsCs SDU Size Peak. Traffic Descriptor parameter for the connection between the RNC Egress SsCs SDU Size Average. Traffic Descriptor parameter for the connection between the R Egress SsCs SDU Size Peak. Traffic Descriptor parameter for the connection between the RNC Time to wait for CN response to an Iu-c initialization procedure. After this length of time, if no Number of repeated attempts to initialize the Iu user plane protocol, when it has failed.This at Identifies what kind of radio access bearer this MO instance represents.This attribute may onl Guaranteed bit rate in downlink direction.Use of value is based on RAB Asymmetry Indicator.A Guaranteed bit rate in uplink direction.Use of value is based on RAB Asymmetry Indicator.App Deprecated: This attribute is currently not used by the system. Changing it has no effect.Used Used to determine the value to which IE CM Configuration Change CFN (RNSAP and NBAP) an Enables/disables the possibility of HO from UMTS to GSM per RAB type.This attribute may onl State of the radio connection.This attribute may only be changed by Ericsson personnel. Value Enables/disables the possibility of IFHO per RAB state.This attribute may only be changed by E This parameter specifies the RES service which the UeRc belongs to.This attribute may only be Preferred compressed mode method for the uplink.This attribute may only be changed by Eric Preferred compressed mode method for the downlink.This attribute may only be changed by Indicates which capabilities are supported by a specific UeRc. This attribute may only be chang Enables/disables handover from UMTS to GAN. Dependencies: Not used if the license ganMob RES service to which this UeRc belongs.This attribute may only be changed by Ericsson person Indicates if this RAB combination is an MMTEL RAB or not.This attribute may only be changed The reference TFC is the TFC from the TFCS of the configuration represented by the UeRc that 0 to 6 E-DCH MAC-d power offset used by the Outer loop power control function.This attribute may 0 to 15 Targeted number of HARQ transmissions in the uplink.It is recommended that the value of thi Indicates whether scheduled or non-scheduled grant info applies for the EUL MAC-d flow.This 10 20 30 40 50 60 70 80 90 100 120Time 140 160 that200 the 400 re-ordering entity should wait for an outstanding MAC-es PDU.It is recommende Identifies what kind of radio bearer this MO instance represents.This attribute may only be ch Reference gain factor for the UL E-DPDCH reference transport format 1.This attribute may onl Reference E-TFCI for signaled E-DPDCH gain factors.This attribute may only be changed by Eric Transport format indicator.This attribute may only be changed by Ericsson personnel. MAC-hs/MAC-ehs window size used in the RBS and the UE for MAC-hs/MAC-ehs data transfer Time to live for a MAC-hs SDU starting from the instant of its arrival into an HSDPA Priority Qu Time to live for MAC-hs SDU. The Re-ordering release timer T1 controls the stall avoidance in MAC-hs reordering buffer size.This attribute may only be changed by Ericsson personnel. Unit Identifies what kind of radio bearer this MO instance represents. Special values:Only the value Priority Queue ID.This attribute may only be changed by Ericsson personnel. Filter: TDD Scheduling priority of a priority queue.0 - Lowest Priority?5 - Highest PriorityThis attribute ma Configures DPCH multiplexing in the downlink for two HSDPA users. This attribute may only be Configures DPCH multiplexing in the downlink for four HSDPA users. This attribute may only b Spreading factor.This attribute may only be changed by Ericsson personnel. $FDD{"Value map Indicates which message part format the DPCH shall use.This attribute may only be changed b TFCI presence indicator. This has the same meaning as the RRC parameter "TFCI existence".D Current number of TFCs.This attribute may only be changed by Ericsson personnel. Fixed or flexible position for TrCH on DPCH.This attribute may only be changed by Ericsson pe Number of pilot bits for DPCH.The number of pilot bits needs to be signaled to the UE in case Second interleaving mode.This attribute may only be changed by Ericsson personnel.Value ma CCTrCH ID for dedicated and shared channels. Identifies unambiguously a downlink CCTrCH w

0 to 8 0 to 127 44 to 100 2 10 01 0 to 100 0 to 100 0 to 100 -1 8 11 15 21 30 42 60 84

Modulation mode.This attribute may only be changed by Ericsson personnel.Value mapping:0 Number of channelisation codes per time slot. This attribute may only be changed by Ericsson Number of time slots. This attribute may only be changed by Ericsson personnel. Filter: TDDRe Time slot format for all physical channels except the first (meaning the physical channel with t Maximum amount of puncturing used for DCH in downlink rate matching.This attribute may o Repetition length.This attribute may only be changed by Ericsson personnel.Specification: Cha Repetition period.This attribute may only be changed by Ericsson personnel.Value mapping:0: Number of radio frames to be used as the offset for the DPCH. Used for determining the fram Determines the number of bits for the TFCI bits code word.Value mapping:0: v41: v82: v163: v TSTD indicator. TSTD can be used to overcome the time varying characteristics of the commun Gain factor for the UL E-DPCCH.This attribute may only be changed by Ericsson personnel. E-DCH minimum set E-TFCI.This attribute may only be changed by Ericsson personnel. Specific Puncturing limit when increasing the number of used channelization codes. Only applies when TTI for E-DCH.This attribute may only be changed by Ericsson personnel. Unit: ms E-TFCI table index.This attribute may only be changed by Ericsson personnel. Specification: 3G Deprecated: This attribute is currently not used by the system. Changing it has no effect.TTI b Deprecated: This attribute is currently not used by the system. Changing it has no effect.TTI b Deprecated: This attribute is currently not used by the system. Changing it has no effect.TTI b Deprecated: This attribute is currently not used by the system. Changing it has no effect.Defin Minimum reduced E-DPDCH gain factor. When E-DCH is configured, if the total UE transmit po Alternative way to represent TFCThis attribute may only be changed by Ericsson personnel. Fil Array of TFI data for this UeRcPhyChTfc for all used TrChs of this Radio Connection.This attribu Transport format combination id.This attribute may only be changed by Ericsson personnel. Fi Indicates whether this instance is used for uplink or downlink.0: UL1: DLThis attribute may onl Spreading factor.This attribute may only be changed by Ericsson personnel. $FDD{"Value map Indicates which message part format the DPCH shall use for DPCCH.This attribute may only be TFCI presence indicator.DPCH info.This attribute may only be changed by Ericsson personnel. Current number of TFCs.This attribute may only be changed by Ericsson personnel. The maximum amount of puncturing for DCH in uplink rate matching.This attribute may only b Second interleaving mode.This attribute may only be changed by Ericsson personnel.Value ma CCTrCH ID for dedicated and shared channels. Identifies unambiguously an uplink CCTrCH with Controls which message part format the DPCH shall use as the time slot format for the first ph Modulation mode.This attribute may only be changed by Ericsson personnel.Value mapping:0 Number of channelisation codes per time slot. This attribute may only be changed by Ericsson Number of time slots. This attribute may only be changed by Ericsson personnel.Filter: TDDRe Time slot format for all physical channels except the first (meaning the physical channel with t Repetition length.This attribute may only be changed by Ericsson personnel.Specification: Cha Repetition period.This attribute may only be changed by Ericsson personnel.Value mapping: 0 Number of radio frames between special burst transmissions during DTX.This attribute may on Number of radio frames to be used as the offset for the DPCH. Used for determining the fram Determines the number of bits for the TFCI bits code word.Value mapping: 0: v41: v82: v163: Number of subframes between two adjustments of the uplink transmission timing.This attribu Step size to be used for adjustment of the uplink transmission timing.This attribute may only b Identifies what kind of radio bearer this MO instance represents.Value RB_RRC is not applicab Egress Bit Rate Average Traffic Descriptor parameter for the AAL2 connection between the RN Egress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the RNC a Egress SsCs SDU Size Average. Traffic Descriptor parameter for the AAL2 connection between Egress SsCs SDU Size Peak. Traffic Descriptor parameter for the AAL2 connection between the Ingress Bit Rate AverageTraffic Descriptor parameter for the AAL2 connection between the RN Ingress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the RNC a

Ingress SsCs SDU Size Average. Traffic Descriptor parameter for the AAL2 connection betwee Ingress SsCs SDU Size Peak. Traffic Descriptor parameter for the AAL2 connection between th Identifies what kind of radio bearer this MO instance represents.This attribute may only be ch RLC Logical Channel Type.RLC info common to RNC side and UE sideThis attribute may only be RLC transport mode.RLC info common to RNC side and UE side.It is assumed that the same va Timer poll, started when poll is transmitted. New poll is sent when timer expires and no STATU Minimum time between STATUS reports.RLC info on RNC side. Valid only for RLC mode = AM. Indicates if poll at last PDU in transmission buffer is used or not.RLC info on RNC side. Valid on Indicates if poll at last PDU in retransmission buffer is used or not.RLC info on RNC side. Valid Indicates if RNC should send a STATUS report for each detected PDU missing.RLC info on RNC Maximum number of RLC PDUs sent without getting them acknowledged. RLC info on RNC sid Maximum number of RLC PDUs in the receiving buffer. RLC info on RNC side. Valid only for SR Indicates if in-sequence delivery shall be used or not.RLC info on RNC side. Valid only for RLC m Determines the number of transmissions of a PDU before a SDU is discarded or reset procedu Determines the maximum number of transmissions of a reset PDU.The maximum number of Timer used for retransmission of reset PDU. This attribute may only be changed by Ericsson pe Minimum time between polls. Used in RNC. This attribute may only be changed by Ericsson pe Number of SDUs, interval between polling.This attribute may only be changed by Ericsson per Percentage of transmission windows, threshold for polling.This attribute may only be changed Number of PDUs, interval between pollings.This attribute may only be changed by Ericsson pe Transmission SDU discard mode.RLC info on UE side UL. This attribute may only be changed by Determines the number of transmissions of a PDU before a SDU is discarded or reset procedu Maximum number of RLC PDUs sent without getting them acknowledged. RLC info on UE side Timer used for retransmission of reset PDU.RLC info on UE side UL. This attribute may only be The maximum number of transmissions of reset PDU equals MaxRst-1.RLC info on UE side UL. Minimum time between polls.RLC polling info on UE side UL. Valid only for RLC mode = AM.Th Timer poll, started when poll is transmitted. New poll is sent when timer expires and no STATU Last PDU in transmission poll.RLC polling info on UE side UL. This attribute may only be change Last PDU in retransmission poll.RLC polling info on UE side UL. This attribute may only be chan Indicates whether in-sequence delivery shall be used.It is assumed that the same value is used Maximum number of RLC PDUs in the receiving buffer. RLC info on UE side DL. Valid only for SR Minimum time between STATUS reports.RLC info on UE side DL. Valid only for RLC mode = AM Indicates if UE should send a STATUS report for each detected PDU missing. This value is also Number of SDUs, interval between pollings.This attribute may only be changed by Ericsson pe Number of SDUs, interval between polling.This attribute may only be changed by Ericsson per Percentage of transmission windows, threshold for polling.This attribute may only be changed Transport Channel Identity (DCH Id) which gives the association between RB and Transport Ch Logical Channel Multiplexing indicator in MacD.RB Mapping Info. This attribute may only be ch Transport Channel Type DL.RB Mapping Info.This attribute may only be changed by Ericsson p Transport Channel Type UL.RB Mapping Info. Valid for RLC mode = UM, AM and TM.This attri Identifies the user of this radio bearer.This attribute may only be changed by Ericsson personn Logical Channel Identity.Used when several RBs are muxed to single DCH (1 is used for first RB Logical Channel PriorityUsed when several RBs are muxed to single DCH (1 is used for highest Radio Bearer Identity.1: SRB12: SRB23: SRB34: SRB45-32:used by other types of radio RLC User Type, used to inform the RLC about which interface to use.RLC info is common to bo Maximum Flexible RLC PDU size.This attribute may only be changed by Ericsson personnel.Dep Determines the number of transmissions of a PDU before a SDU is discarded or reset procedu Determines the maximum number of transmissions of a reset PDU.The maximum number of Percentage of transmission windows, threshold for polling.This attribute may only be changed Maximum number of RLC PDUs in the receiving buffer. RLC info on RNC side. Valid only for RL

Timer poll, started when poll is transmitted. New poll is sent when timer expires and no STATU Timer used for retransmission of reset PDU. This attribute may only be changed by Ericsson pe Minimum time between STATUS reports.RLC info on RNC side. Valid only for RLC mode = AM. Maximum number of RLC PDUs sent without getting them acknowledged. RLC info on RNC sid Determines the number of transmissions of a PDU before a SDU is discarded or reset procedu The maximum number of transmissions of reset PDU equals MaxRst-1.This attribute may only Percentage of transmission windows, threshold for polling.This attribute may only be changed Maximum number of RLC PDUs in the receiving buffer. RLC info on UE side DL. Valid only for SR Timer poll, started when poll is transmitted. New poll is sent when timer expires and no STATU Timer used for retransmission of reset PDU.RLC info on UE side UL. This attribute may only be Minimum time between STATUS reports.RLC info on UE side DL. Valid only for RLC mode = AM Maximum number of RLC PDUs sent without getting them acknowledged. RLC info on UE side Ingress Bit Rate Average Traffic Descriptor parameter for the AAL2 connection between the R Ingress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the RNC a Egress Bit Rate AverageTraffic Descriptor parameter for the AAL2 connection between the RN Egress Bit Rate PeakTraffic Descriptor parameter for the AAL2 connection between the RNC a Ingress SsCs SDU Size Average in octets.Traffic Descriptor parameter for the AAL2 connection Ingress SsCs SDU Size Peak in octets.Traffic Descriptor parameter for the AAL2 connection be Egress SsCs SDU Size Average in octets.Traffic Descriptor parameter for the AAL2 connection Egress SsCs SDU Size Peak in octets.Traffic Descriptor parameter for the AAL2 connection bet Transport channel type.This attribute may only be changed by Ericsson personnel. Filter: TDD Transport Channel Identity.This attribute may only be changed by Ericsson personnel. Identifies what kind of radio bearer this MO instance represents.This attribute may only be ch DCH Frame Protocol Identity. This is the group that a DCH belongs to. In case of coordinated D Frame Handling Priority.Frame Handling parameter.This attribute may only be changed by Eric Payload Cyclic Redundancy Check (CRC) usage indicator (to SP and NBAP/RRC).Frame Handling UL Format Protocol (NBAP).Frame Handling parameter.This attribute may only be changed by Current number of TFs defined in downlink.This attribute may only be changed by Ericsson pe Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Transmission time interval in downlink.This attribute may only be changed by Ericsson person Channel coding type in downlink.This attribute may only be changed by Ericsson personnel. Va Channel coding rate in downlink.This attribute may only be changed by Ericsson personnel. Va CRC size in downlink.This attribute may only be changed by Ericsson personnel. Value mappin Current number of TFs defined in uplink.This attribute may only be changed by Ericsson perso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person

0 to 9 11 13 15 17 19 100 to 60000 0 to 9 11 13 15 17 19 0 to 100 0 to 100 0 to 100 0 to 9 11 13 15 17 19 1 to 1000 0 to 20000 0 to 100

1 1000 5 20 10 10 1 100 3000 30

Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transmission Time Interval in uplink.This attribute may only be changed by Ericsson personne Channel coding type in uplink.This attribute may only be changed by Ericsson personnel. Value Channel coding rate in uplink.This attribute may only be changed by Ericsson personnel. Value CRC size in uplink.This attribute may only be changed by Ericsson personnel. Value mapping:-1 $FDD{"Array of the maximum Transport Formats (TFIs) allowed for this TrCH.The first element Controls whether quality evaluation is used for the downlink transport channel.Value mapping Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Number of transport blocks for this TF in downlink.This attribute may only be changed by Erics Number of transport blocks for this TF in uplink.This attribute may only be changed by Ericsso Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Transport block size for this TF in downlink.This attribute may only be changed by Ericsson per Transport block size for this TF in uplink.This attribute may only be changed by Ericsson person Used by MAC-D in connection with higher layer scheduling when calculating data amounts to DCH Combination Indicator.Frame Handling parameter.This attribute may only be changed by Power congestion filter.Used by Congestion Control.This attribute may only be changed by Eri Defines the periodicity of the DL cell carrier power measurement reporting.Used by CellLoad M Defines the RBS internal filtering.Used by CellLoad Monitor Initialization in Admission Control. Attack factor for filtering the measured/estimated power consumption.Used by Cell Load Mon Decay factor for filtering the measured/estimated power consumption.Used by Cell Load Mon Factor to take the flexibility of the TFS for a DCH into account when calculating the ASE. This a RTWP measurement filter coefficient.This attribute may only be changed by Ericsson personn Reporting interval for transmitted carrier power measurements between reports A and B.It is Robustness timer for end of congestion detection.Used by Congestion Control.This attribute m Scaling factor for the estimation of the DL power consumption per RL. Unit: 0.01Changing this

ing feature is not activated through its RncFeature MO instance.This attribute may only be changed by Ericsson personnel. Dependencies:The values in H data frame on the downlink. Part of the Downlink Offset (DO). Should be set to the upper limit of the delay within the RNC in the transmission of eac H data frame on the downlink. Part of the Downlink Offset (DO). Should be set to the upper limit of the delay within the RBS in the transmission of eac E CONFIRM.This attribute may only be changed by Ericsson personnel.Unit: 0.1 s h the next measurement report may be sent from either the UE or RNC internal buffer load measurements. Used to limit the UE and RNC buffer load re easurement.This attribute may only be changed by Ericsson personnel. Unit: 0.1 sChange takes effect: New connections s.This attribute may only be changed by Ericsson personnel. Change takes effect: New connections ownlink radio bearer on DCH with bad coverage to a lower DCH rate.This attribute may only be changed by Ericsson personnel. Special values.0: the rep nnection from a dedicated transport channel to a common transport channel (RACH/FACH) during channel switching in case of radio bearer inactivity.T s sent to the core network, for UEs that only use one or two signaling connections and no RABs in state CELL_DCH.This attribute may only be changed b DTX cycle 1.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD DTX cycle 2.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD TX cycle 1 for EUL 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD TX cycle 2 for EUL 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD TX cycle 1 for EUL 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD TX cycle 2 for EUL 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD H transmission, after which the UE shall immediately move from DTX cycle 1 to DTX cycle 2, for EUL 2ms TTI .This attribute may only be changed by Eric H transmission, after which the UE shall immediately move from DTX cycle 1 to DTX cycle 2, for EUL 10ms TTI.This attribute may only be changed by Eric h DTX cycle 2 Note, when this parameter is set to 2, RNC excludes the IE "UE DTX long preamble length" from the RRC message containing the IE DTX-D H transmission, after which the UE E-DCH transmissions are restricted to the MAC DTX pattern. The UE E-DCH transmissions are never restricted to the uring which the CQI reports have higher priority than the DTX pattern The CQI reports always have higher priority than the DTX pattern when it is set to es.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD after the first slot of an HS-PDSCH reception during which the UE shall monitor the HS-SCCHs in the UE's HS-SCCH set continuously.This attribute may which the UE shall monitor the E-AGCH transmissions from the serving E-DCH cell and the E-RGCH from cells in the serving E-DCH radio link set, for EUL which the UE shall monitor the E-AGCH transmissions from the serving E-DCH cell and the E-RGCH from cells in the serving E-DCH radio link set, for EUL he E-AGCH and the E-RGCH when the subframe (2msTTI) or frame (10ms TTI) overlaps with the start of the DRX reception pattern.This attribute may on FN for E-DCH 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD FN for E-DCH 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD nd DPCCH continuously after (re)configuration with CPC activated.This attribute may only be changed by Ericsson personnel.Change takes effect: New rdcoded parameter set(profile) is used or not to configure the CPC connections. If it is set to "OFF", the CPC connections are configured with a pre-defi n gap pattern begins in a radio frame, containing at least one transmission gap slot. TGSN is the slot number of the first transmission gap slot within th st transmission gap within the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Value mapping:Possible values for G cond transmission gap within the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Dependencies:If this parameter s in transmission gap pattern 1.This attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM carrier RS in transmission gap pattern 2.This attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM carrier RSS of transmission gap patterns within the transmission gap pattern sequence. This attribute may only be changed by Ericsson personnel. Special values:0 ween the starting slots of two consecutive transmission gaps within a transmission gap pattern. If this parameter is not set by higher layers, then there mode control. This attribute may only be changed by Ericsson personnel. Value mapping:0 = 'A'1 = 'B' Change takes effect: Next configuration of the tra all use to attempt to decode the unknown BSIC of a GSM cell in the initial BSIC identification procedure.This attribute may only be changed by Ericsson e BSIC of a GSM cell in the BSIC re-confirmation procedure.This attribute may only be changed by Ericsson personnel. Value mapping:1: 0.5 s2: 1.0 s3: mber, for the pattern sequence when starting CPM.TGCFN = running CFN + startCFNoffset + TGCFNoffsetThis attribute may only be changed by Ericsson rame in RNC.This attribute may only be changed by Ericsson personnel. Unit: ms rame in RBS.This attribute may only be changed by Ericsson personnel. Unit: ms me in RNC.This attribute may only be changed by Ericsson personnel. Dependencies:It is recommended to set tProcRncUl + toAWEUl + toAEUl <= 64 me in RBS.This attribute may only be changed by Ericsson personnel. Unit: ms ach1 is used for logical channels BCCH, CCCH and DCCH, control signaling.This attribute may only be changed by Ericsson personnel. Disturbances:Chan ach2 is used for logical channel DTCH, traffic signaling.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute m

els.Value mapping:0: 40 %1: 44 %2: 48 %...15: 100 %This attribute may only be changed by Ericsson personnel.Dependencies:Before changing th rt Format Combination Set (TFCS) for PCH, FACH1 and FACH2.This attribute may only be changed by Ericsson personnel.Disturbances:Changing this attr FACH. The first FACH is used for logical channels BCCH, CCCH and DCCH, for control signaling.This attribute may only be changed by Ericsson personnel nd FACH. The second FACH is used for logical channel DTCH, for traffic signaling.This attribute may only be changed by Ericsson personnel. Disturbance ttribute may only be changed by Ericsson personnel. Value mapping:0: 0 s1: 0.2 s2: 0.4 s3: 0.6 s4: 0.8 s5: 1.0 s...50: 10 sUnit: 0.2 sChange takes effect: ystem. This attribute may only be changed by Ericsson personnel. Unit: sChange takes effect: New connections e may only be changed by Ericsson personnel. Unit: sChange takes effect: New connections attribute may only be changed by Ericsson personnel. Unit: sChange takes effect: New connections M.Once the cell change order from UTRAN has been sent, the system expects to receive an Iu release command or Cell change failure from UTRAN with asurement handler function will wait this predetermined time before it sends the first cell list to the UE. This extra delay will decrease the risk for the U mode. This attribute may only be changed by Ericsson personnel. Special values:0 means no retry. Value mapping:0: 0.0 s1: 0.2 s2: 0.4 s3: 0.6 s4: 0.8 s5: UE shall measure on. This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections may be triggered during IRAT-HO execution.This attribute may only be changed by Ericsson personnel. Value mapping:1: 0.5 s2: 1.0 s...10: 5.0 sUnit: 0 to Inter-frequency Load based handover.Unit: SecondsChange takes effect: Next soft congestionThis attribute may only be changed by Ericsson person ntra-RNC Hard Handover.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdBatonHoSupport ntil uplink initial synchronization is achieved. This parameter is used for the NBAP cell setup message.This attribute may only be changed by Ericsson p This attribute may only be changed by Ericsson personnel. Unit: 100 ms ynchronization control frame.This attribute may only be changed by Ericsson personnel. The actual modification period (MP), in number of frames, equals 2^m.m >= k, where k = max[cnDrxCycleLengthPs, cnDrxCycleLengthCs, utranDrxCy umber of repetitions per modification period equals 2^r while the actual repetition period, in number of frames, equals [2^m DIV 2^r], where m is the essions in one non-PL cell. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of the mbmsModificationPeri essions in one PL cell. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of the mbmsModificationPeriodCo lls for which information is sent on MCCH. The MCCH FACH with TTI 20 ms for S-CCPCH has maximum user data rate 7.6 kbps.The values of the mbmsM ycle length is calculated as the k'th potential of 2, where k = 6,..,9. The BCCH modification information element should be transmitted in every frame w This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD nged by Ericsson personnel. Filter: FDD This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect: New co This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect: New co s attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect: New conn s attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Change takes effect: New conn measurements.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Unit: 10 msCh ment and the power value transmitted in System Information is larger than this hysteresis in one cell, an update of system information is initiated in tha ncing.This parameter is signaled over NBAP with the values [1..10] slots, where 1 corresponds to an allowed change of the downlink power (due to dow s attribute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD attribute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD This attribute may only be changed by Ericsson personnel. Unit: 10 msChange takes effect: New connectionsFilter: FDD error measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Unit: dBChange takes effect: N error measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Resolution: 10Unit: msChange when a SIR error measurement report shall be sent from the RBS to RNC.This attribute may only be changed by Ericsson personnel. Change takes effe ignored after a successful "SIR target up" command, for 10 ms TTI users.This attribute may only be changed by Ericsson personnel. Unit: radio frame ( htly biased towards increased BLER. This parameter is used to compensate for this bias.This attribute may only be changed by Ericsson personnel. Valu e Power measurement used for downlink power balancing.This attribute may only be changed by Ericsson personnel. Dependencies: Changing this attr measurement. This attribute may only be changed by Ericsson personnel. Change takes effect: New connections ing the start of the first transmission gap in the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Unit: 0.1 dBChang e frame containing the start of the first transmission gap in the transmission gap pattern.This attribute may only be changed by Ericsson personnel. Un ing the start of the second transmission gap in the transmission gap pattern. This attribute may only be changed by Ericsson personnel. Unit: 0.1 dBCha e frame containing the start of the second transmission gap in the transmission gap pattern.This attribute may only be changed by Ericsson personnel. the first slot after transmission gap. This attribute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD ute may only be changed by Ericsson personnel. Change takes effect: New connections hall be initiated.This attribute may only be changed by Ericsson personnel. Value mapping:0: None1: Event E2: Event F3: Both (1&2)Filter: FDD

pressed mode during DL power balancingThis attribute may only be changed by Ericsson personnel. Value mapping:0: 0.0 dB...4: 2.0 dB...20: 10.0 dBUn link DPCCH part of RABs (or SRB) with a minimum spreading factor >= 32. 'Low' refers to low data transmission capability due to high spreading fact link DPDCH part of RABs (or SRB) with a minimum spreading factor >= 32. 'Low' refers to low data transmission capability due to high spreading fact link DPCCH part of RABs (or SRB) with a minimum spreading factor in the range 8 < SF <= 16. 'High' refers to high data transmission capability due link DPDCH part of RABs (or SRB) with a minimum spreading factor in the range 8 < SF <= 16. 'High' refers to high data transmission capability due link DPCCH part of RABs (or SRB) with a minimum spreading factor <= 8. 'Extra high' refers to extra high data transmission capability due to very low link DPDCH part of RABs (or SRB) with a minimum spreading factor <= 8. 'Extra high' refers to extra high data transmission capability due to very low ignored after a successful "SIR target up" command, for 2 ms TTI users.This attribute may only be changed by Ericsson personnel. Unit: radio frame (1 hen the PCCPCH RSCP or downlink time slot ISCP is not received from the measurement report. Expressed relative to the value of UtranCell::pccpchPow alue, used when the uplink time slot ISCP is not received from the measurement report. In the RRC CONNECTION SETUP message, the value of this attr nly be changed by Ericsson personnel.Unit: dBFilter: TDDReplaces: tdTddTpcStepSize decay used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD ion decay used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD n decay used by Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Filter: TDD for E-DCH users in the RBS. Needed for RBS hardware consumption calculations in RNC. The calculation is performed in the same way for 2 ms and 10 m e interference level. This attribute may only be changed by Ericsson personnel. Value mapping: 0: -36.0 dB 1: -35.5 dB...34: -19.0 dB...72: 0.0 dBD MP and each Module MP.When gpehStorageSize is exceeded, the GPEH function will remove the oldest GPEH file(s) from the persistent storage to mak rding ROP files on the O&M MP.When recordingStorageSize is reached, the PM Recording function will remove the oldest recording file and conti quency load sharing will be inhibited. Defined in terms of the difference in available resources between the source cell and the target cell. This attribu ation time at serving HS-DSCH Cell Change.This attribute may only be changed by Ericsson personnel. Dependencies:hsCellChangeCfnOffset >= hsM of the HS MAC-D flow from Source Cell to Target Cell, at Serving HS-DSCH Cell Change.This attribute may only be changed by Ericsson personnel. Depen ore than this time to empty its buffer with the current serving grant.This attribute may only be changed by Ericsson personnel.Unit: ms tive TNL CONGESTION INDICATION control frames, belonging to one flow controlled EUL flow, which are sent towards RBS. The interval is valid per flow Frames with a DRT Extension. The purpose is to not send DRT Extensions too often. When the parameter is set to zero, no DRT Extensions are sent (the control frame, for this PQF, that results in a reduced HSDPA bit rate. The reason for checking the presence of these CAPACITY ALLOCATION control fra ng CAPACITY ALLOCATION control frames.Example: New bit rate = Old bit rate * (1- hsMissingCaReduction/100). This attribute may only be changed by point is the shortest dynamic delay that can be detected as soft congestion, expressed as percentage of edchDataFrameDelayThresholdThis attribute m e blocked in a cell.This attribute may only be changed by Ericsson personnel. Change takes effect: ImmediatelyFilter: FDD he feature Increased RACH Coverage is active.This attribute may only be changed by Ericsson personnel. Value mapping:-360: -36.0 dB-355: -35.5 dB... NFIGURATION. Stopped at reception of RRC: RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed by Ericsson pers EL RECONFIGURATION or RADIO BEARER RECONFIGURATION. Stopped at reception of RRC: TRANSPORT CHANNEL RECONFIGURATION COMPLETE or RA NT INITIATION REQUEST. Stopped at reception of DEDICATED MEASUREMENT INITIATION RESPONSE.Unit: sThis attribute may only be changed by Erics to UE. Stopped at reception of RRC CONNECTION SETUP COMPLETE.Unit: sThis attribute may only be changed by Ericsson personnel. E to UE in state CELL_DCH. Stopped at reception of RRC CONNECTION RELEASE COMPLETE.Unit: sThis attribute may only be changed by Ericsson perso E to UE in state CELL_FACH. Stopped at reception of RRC CONNECTION RELEASE COMPLETE.Unit: sThis attribute may only be changed by Ericsson pers procedure. Started at transmission of NBAP RADIO LINK SETUP REQUEST. Stopped at reception of NBAP RADIO LINK SETUP RESPONSE.Unit: sThis attrib procedure. Started at transmission of RNSAP RADIO LINK SETUP REQUEST. Stopped at reception of RNSAP RADIO LINK SETUP RESPONSE.Unit: sThis att ADY (Iub).Unit: sThis attribute may only be changed by Ericsson personnel. ADY (Iur).Unit: sThis attribute may only be changed by Ericsson personnel. may only be changed by Ericsson personnel. ASE or RADIO BEARER RECONFIGURATION. Stopped at reception of RRC: RADIO BEARER RELEASE COMPLETE or RADIO BEARER RECONFIGURATION CO rocedure. Started at transmission of RRC ACTIVE SET UPDATE REQUEST. Stopped at reception of RRC ACTIVE SET UPDATE COMPLETE or RRC ACTIVE SE n procedure. Started at transmission of NBAP RADIO LINK ADDITION REQUEST. Stopped at reception of NBAP RADIO LINK ADDITION RESPONSE or NBA on procedure. Started at transmission of RNSAP RADIO LINK ADDITION REQUEST. Stopped at reception of RNSAP RADIO LINK ADDITION RESPONSE or R om the UE.Unit: msResolution: 250This attribute may only be changed by Ericsson personnel. n the node. The value is not used by the RNC.This attribute may only be changed by Ericsson personnel. by the UE.This attribute may only be changed by Ericsson personnel. Value mapping:0: 100 ms1: 200 ms2: 400 ms3: 600 ms4: 800 ms5: 1000 ms6: 120 ate message and UE reception of the Cell Update Confirm message. If not received, the UE sends a new Cell Update. This attribute may only be change lease Complete message. Set in SIB 1.This attribute may only be changed by Ericsson personnel. Change takes effect: New connections mode if "out of service area". Used by Rel-4 and earlier UEs. Rel-5 and later UEs will ignore the value of this attribute.This attribute may only be change

tion Request.Used by the UE.This attribute may only be changed by Ericsson personnel. Change takes effect: New connections .Used by the UE.This attribute may only be changed by Ericsson personnel. nection release complete message.Used by the UE. This attribute may only be changed by Ericsson personnel. Change takes effect: New connections UE in system information. This attribute may only be changed by Ericsson personnel. Change takes effect: New connections detection (UE in DCH).This attribute may only be changed by Ericsson personnel. ction (UE in DCH)This attribute may only be changed by Ericsson personnel. Dependencies:Must not be set longer than t313, assuming 1 frame = 10 ms CH)This attribute may only be changed by Ericsson personnel. Unit: s tribute may only be changed by Ericsson personnel. Unit: s ribute may only be changed by Ericsson personnel. Special values:0 indicates that the t313 is not in use.Dependencies:Must be set longer than n315, a delay in number of radio frames added to the activation time (i.e. the CFN) calculated by the RNC using SRB on DCH-DL. This system constant can be ca radio frames added to the activation time (i.e. the CFN) calculated by the RNC using SRB on HS. This system constant can be calculated in the following nged by Ericsson personnel. Unit: bit er subflow and more than one subflow exists for one rabType. It is used to create a subflow combination with the correct sduSize parameters e.g. SID + bute may only be changed by Ericsson personnel. Unit: frames e CNs. This attribute may only be changed by Ericsson personnel. Value mapping:0: PS only 1: CS only 2: PS and CS This attribute may only be changed by Ericsson personnel. .This attribute may only be changed by Ericsson personnel. Value mapping:0: Erroneous SDUs are delivered1: Erroneous SDUs are not delivered2: No ch only be changed by Ericsson personnel. only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. te may only be changed by Ericsson personnel. reported for cells in the active set. This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: TrueChange takes effect: Ongoi cell synchronization information shall be reported for cells in the detected set. This attribute may only be changed by Ericsson personnel. Value mappin reported for the cells in the monitored set. This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: TrueChange takes effec 1a reporting evaluation. This attribute may only be changed by Ericsson personnel. Value mapping:2 : Monitored set cells4 : Detected set cells5 : Dete iggered periodical reporting due to 'cell addition failure', for event type 1a.Used by UE functions for intra-frequency measurement reporting (in CELL_D event 1a. This attribute may only be changed by Ericsson personnel. Value mapping:1 : Virtual/Active set cells + 12 : Virtual/Active set cells + 23 : Virtua reporting evaluation. This attribute may only be changed by Ericsson personnel. Value mapping:1: Active set cellsChange takes effect: Ongoing connec ered periodic reporting for event 1c. This attribute may only be changed by Ericsson personnel. Value mapping:0: 11: 22: 4...6: 647: infinityChange t event 1c. This attribute may only be changed by Ericsson personnel. Value mapping:1 : Virtual/Active set cells + 12 : Virtual/Active set cells + 23 : Virtua ell. This attribute may only be changed by Ericsson personnel. Value mapping:0 : False1 : TrueChange takes effect: Ongoing connections (next switch to all be reported for GSM cells. This attribute may only be changed by Ericsson personnel. Value mapping:0 : False1 : TrueChange takes effect: Ongoing c event 1d. This attribute may only be changed by Ericsson personnel. Value mapping:1: Virtual/Active set cells + 12: Virtual/Active set cells + 23: Virtual event 3a.This attribute may only be changed by Ericsson personnel. Filter: FDD orting evaluation, for event 6a and 6b.This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections (next switc reported for cells in the Virtual Active Set(s), for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Change takes effe ive Set(s) shall be done or not, for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing co quency included in the report for measurement 4 event 2b.This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing co d GSM Handover measurements using measurement quantity CPICH Ec/No.This attribute may only be changed by Ericsson personnel. Unit: dBChange r.This attribute may only be changed by Ericsson personnel.Value mapping:0 : No report 1 : Type 12 : Type 2Filter: TDDReplaces: tdRachSfnSfnTimeDiff M Handover measurements using measurement quantity P-CCPCH RSCP.This attribute may only be changed by Ericsson personnel. Unit: dBm Change ta application for which the RAB is optimized.This attribute may only be changed by Ericsson personnel. Value mapping:0: Conversational1: Streaming2: changed by Ericsson personnel. Value mapping:0: Symmetric Bidirectional1: Asymmetric Unidirectional DL2: Asymmetric Unidirectional UL3: Asymmet is based on the RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. Unit: bps based on the RAB asymmetry indicator.This attribute may only be changed by Ericsson personnel. Unit: bps ed by Ericsson personnel. Unit: bit ercentile of the distribution of delivered SDUs during the lifetime of a bearer service, where delay for an SDU is defined as the time from a request to tr hanged by Ericsson personnel. ed SDUs.This attribute may only be changed by Ericsson personnel. Value mapping:0: Speech1: Unknown r for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1:

or the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1: 6 for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1: r the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0 bps1: 64 rameter for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet eter for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet ameter for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet eter for the connection between the RNC and CN.This attribute may only be changed by Ericsson personnel. Unit: octet procedure. After this length of time, if no response has been received, RNC repeats the initialization procedure. The maximum number of repeated att r plane protocol, when it has failed.This attribute may only be changed by Ericsson personnel. Special values:0 is used to indicate that noIucInitRep is no nstance represents.This attribute may only be changed by Ericsson personnel. ue is based on RAB Asymmetry Indicator.Applicable for conversational and streaming (value not valid for interactive).Unit: 1 bpsThis attribute may only s based on RAB Asymmetry Indicator.Applicable for conversational and streaming (value not valid for interactive).Unit: 1 bpsThis attribute may only be he system. Changing it has no effect.Used to determine the value to which IE Activation Time (RRC) and IE CFN (RNSAP and NBAP) shall be set when sta ration Change CFN (RNSAP and NBAP) and TGPS reconfiguration CFN (RRC) shall be set when stopping compressed mode.This attribute may only be ch GSM per RAB type.This attribute may only be changed by Ericsson personnel. Value mapping:0 : not allowed 1 : allowedChange takes effect: Ongoing c be changed by Ericsson personnel. Value mapping:See UeRc class description for list of possible values and their interpretation.Dependencies: This att e.This attribute may only be changed by Ericsson personnel. Change takes effect: Ongoing connections (next change of RC state)Filter: FDD eRc belongs to.This attribute may only be changed by Ericsson personnel.Filter: FDD This attribute may only be changed by Ericsson personnel. Change takes effect: Next state transitionFilter: FDD nk.This attribute may only be changed by Ericsson personnel. Change takes effect: Next state transitionFilter: FDD fic UeRc. This attribute may only be changed by Ericsson personnel. Change takes effect: Next reconfiguration Filter: FDD endencies: Not used if the license ganMobility is not active. Change takes effect: Ongoing connections (next change of RC state) This attribute may only may only be changed by Ericsson personnel.Filter: TDD r not.This attribute may only be changed by Ericsson personnel.Filter: FDD nfiguration represented by the UeRc that has the most Transport Format information in the TFCS (the TFC that will result in the maximum number of T ower control function.This attribute may only be changed by Ericsson personnel. Unit: dB k.It is recommended that the value of this attribute should be the same for all flows under a specific UeRc instance.This attribute may only be changed info applies for the EUL MAC-d flow.This attribute may only be changed by Ericsson personnel. utstanding MAC-es PDU.It is recommended that the value of this attribute should be the same for all flows under a specific UeRc instance.This attribut represents.This attribute may only be changed by Ericsson personnel. Special values:Only the values RB_RRC, RB_PS_INTERACTIVE and RB_PS_INTERA transport format 1.This attribute may only be changed by Ericsson personnel. This attribute may only be changed by Ericsson personnel. Specification: 3GPP 25.321 e changed by Ericsson personnel. he UE for MAC-hs/MAC-ehs data transfer. The parameter value setting is signaled via NBAP and RRC. If MIMO or Multi-Carrier is used for a HS-DSCH co ant of its arrival into an HSDPA Priority Queue. The RBS shall use this information to discard out-of-data MAC-hs SDUs from the HSDPA Priority Queues. e timer T1 controls the stall avoidance in the UE reordering buffer. The parameter value setting is signaled via NBAP and RRC.This attribute may only be y be changed by Ericsson personnel. Unit: kB (1000 bytes) represents. Special values:Only the values RB_RRC, RB_PS_INTERACTIVE_HS, RB_PS_INTERACTIVE_HS_2, RB_PS_INTERACTIVE_HS_3, and RB_PS_STR d by Ericsson personnel. Filter: TDD ority?5 - Highest PriorityThis attribute may only be changed by Ericsson personnel. Filter: TDD o HSDPA users. This attribute may only be changed by Ericsson personnel.Filter: TDD ur HSDPA users. This attribute may only be changed by Ericsson personnel.Filter: TDD by Ericsson personnel. $FDD{"Value mapping:0: SF 41: SF 82: SF 163: SF 324: SF 645: SF 1286: SF 2567: SF 512"}$TDD{"Value mapping:0: SF 11: SF 16"} use.This attribute may only be changed by Ericsson personnel. as the RRC parameter "TFCI existence".DPCH info.This attribute may only be changed by Ericsson personnel. Value mapping:0: No = TFCI not present; hanged by Ericsson personnel. bute may only be changed by Ericsson personnel. Value mapping:0: FIXED1: FLEXIBLEFilter: FDD ts needs to be signaled to the UE in case the downlink physical connection uses spreading factor 128 or 256. In all other cases the UE calculates the nu changed by Ericsson personnel.Value mapping:0: Frame interleaving1: Time Slot interleaving Filter: TDD fies unambiguously a downlink CCTrCH within a radio link.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdCcTrChId

d by Ericsson personnel.Value mapping:0: QPSK1: 8PSKFilter: TDDReplaces: tdModulation ttribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoChCodesPerTimeSlot nged by Ericsson personnel. Filter: TDDReplaces: tdNoTimeSlots first (meaning the physical channel with the least number of time slots and least number of channels). This attribute may only be changed by Ericsson p wnlink rate matching.This attribute may only be changed by Ericsson personnel.Value mapping:0: 40%1: 44%2: 48%...15: 100% Filter: TDDReplaces: tdP d by Ericsson personnel.Specification: Chapter 8.6.6.16 in TS 25.331 V4.17.0Filter: TDDReplaces: tdRepetitionLength d by Ericsson personnel.Value mapping:0: RepetitionPeriod_v11: RepetitionPeriod_v22: RepetitionPeriod_v43: RepetitionPeriod_v84: RepetitionPeriod the DPCH. Used for determining the frame offset from the SFN timing in a cell.This attribute may only be changed by Ericsson personnel.Disturbances:C word.Value mapping:0: v41: v82: v163: v32In case of 8 PSK in 1.28Mcps:v4 corresponds to 6 TFCI code word bits.v8 corresponds to 12 TFCI code word me varying characteristics of the communication channel, Similar to the IE "Tx diversity indicator" for FDD, "TSTD indicator" can be defined and used to nly be changed by Ericsson personnel. e changed by Ericsson personnel. Specification: 3GPP 25.321 d channelization codes. Only applies when the number of code channels is less than the maximum allowed by the UE capability and restrictions impose Ericsson personnel. Unit: ms d by Ericsson personnel. Specification: 3GPP 25.321 he system. Changing it has no effect.TTI budget for an SRB mapped on E-DCH.This attribute may only be changed by Ericsson personnel. Unit: % he system. Changing it has no effect.TTI budget for a SIP RAB mapped on non-scheduled E-DCH.This attribute may only be changed by Ericsson personn he system. Changing it has no effect.TTI budget for scheduled flows on E-DCH.This attribute may only be changed by Ericsson personnel. Unit: % he system. Changing it has no effect.Defines the E-DCH multiplexing option for this E-DCH radio configuration.Value mapping:0: No multiplexing except H is configured, if the total UE transmit power (after applying DPCCH power adjustments and gain factors) would exceed the available maximum power only be changed by Ericsson personnel. Filter: TDD rChs of this Radio Connection.This attribute may only be changed by Ericsson personnel. Filter: TDD only be changed by Ericsson personnel. Filter: TDD downlink.0: UL1: DLThis attribute may only be changed by Ericsson personnel. Filter: TDD by Ericsson personnel. $FDD{"Value mapping:0: SF 41: SF 82: SF 163: SF 324: SF 645: SF 1286: SF 2567: SF 512"}$TDD{"Value mapping:0: SF 11: SF 22: use for DPCCH.This attribute may only be changed by Ericsson personnel. Filter: FDD y only be changed by Ericsson personnel. Value mapping:0: No = TFCI not present1: Yes = TFCI present hanged by Ericsson personnel. nk rate matching.This attribute may only be changed by Ericsson personnel. Value mapping:0: 40 %1: 44 %2: 48 %...15: 100 %Unit: % changed by Ericsson personnel.Value mapping: 0: Frame interleaving1: Time Slot interleaving Filter: TDDReplaces: td2ndInterleavingMode fies unambiguously an uplink CCTrCH within a radio link.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdCcTrChId use as the time slot format for the first physical channel (meaning the physical channel with the least number of time slots and least number of channe d by Ericsson personnel.Value mapping:0: QPSK1: 8PSK Filter: TDDReplaces: tdModulation ttribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdNoChCodesPerTimeSlot nged by Ericsson personnel.Filter: TDDReplaces: tdNoTimeSlots first (meaning the physical channel with the least number of time slots and least number of channels). This attribute may only be changed by Ericsson p d by Ericsson personnel.Specification: Chapter 8.6.6.16 in TS 25.331 V4.17.0Filter: TDDReplaces: tdRepetitionLength d by Ericsson personnel.Value mapping: 0: RepetitionPeriod_v11: RepetitionPeriod_v22: RepetitionPeriod_v43: RepetitionPeriod_v84: RepetitionPeriod missions during DTX.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdSpecialBurstScheduling the DPCH. Used for determining the frame offset from the SFN timing in a cell.This attribute may only be changed by Ericsson personnel.Disturbances:C word.Value mapping: 0: v41: v82: v163: v32In case of 8 PSK in 1.28Mcps:v4 corresponds to 6 TFCI code word bits.v8 corresponds to 12 TFCI code word he uplink transmission timing.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdUlSynchronizationStepFrequency nsmission timing.This attribute may only be changed by Ericsson personnel.Unit: 1/8 chipFilter: TDDReplaces: tdUlSynchronizationStepSize represents.Value RB_RRC is not applicable for this attribute and MO (but is nonetheless allowed to be set).This attribute may only be changed by Erics for the AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This at the AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This attrib ameter for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson personnel. Filte eter for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson personnel. Filter: T for the AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This at the AAL2 connection between the RNC and RBS for the RAB leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This attrib

rameter for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson personnel. Filt eter for the AAL2 connection between the RNC and RBS for the RAB leg.Unit: 1 octetThis attribute may only be changed by Ericsson personnel. Filter: T represents.This attribute may only be changed by Ericsson personnel. Special values:Value RB_PACKET_ADCH, RB_PACKET_ADCH_2, RB_PACKET_ADC ide and UE sideThis attribute may only be changed by Ericsson personnel. Value mapping:0: DCCH Dedicated Control Ch. Valid only on DCS side1: DTCH nd UE side.It is assumed that the same value is used for both DL and UL.0: Acknowledged (AM)1: Transparent (TM)2: Unacknowledged (UM)This attribu l is sent when timer expires and no STATUS is received.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Erics RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms used or not.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: poll no s used or not.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: poll n h detected PDU missing.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping them acknowledged. RLC info on RNC side. Valid only for SRB with RLC mode = AM.This attribute may only be changed by Ericsson personnel. er. RLC info on RNC side. Valid only for SRB with RLC mode = AM.This attribute may only be changed by Ericsson personnel. .RLC info on RNC side. Valid only for RLC mode = UM and AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: the value can efore a SDU is discarded or reset procedure is initiated.The maximum number of transmissions of a PDU equals MaxDat-1.RLC info on RNC side. Valid o of a reset PDU.The maximum number of transmissions of a reset PDU equals MaxRst-1.RLC info on RNC side. Valid only for RLC mode = AM.This attribu ibute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms ibute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms ute may only be changed by Ericsson personnel. Special values:0: attribute not used olling.This attribute may only be changed by Ericsson personnel. Special values:0: not usedUnit: % bute may only be changed by Ericsson personnel. Special values:0: not used UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: Timer Based Explicit (can be configured but is not used)1: Timer Based efore a SDU is discarded or reset procedure is initiated.The number of transmissions is equal to MaxDat - 1.RLC info on UE side UL. Valid only for RLC m them acknowledged. RLC info on UE side UL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson personnel. Value on UE side UL. This attribute may only be changed by Ericsson personnel. Value mapping: 0: 50 ms 1: 100 ms 2: 150 ms ..11: 600 ms12: 700 ms equals MaxRst-1.RLC info on UE side UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: MaxRst = 11: 42: side UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values: -1: not used 10..550 ms with resolutio l is sent when timer expires and no STATUS is received.RLC polling info on UE side UL. Valid only for RLC mode = AM.This attribute may only be change side UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: not last PDU in Transmission Poll1: last PDU in Transmission Po E side UL. This attribute may only be changed by Ericsson personnel. Value mapping:0: not last PDU in Retransmission Poll1: last PDU in Retransmiss .It is assumed that the same value is used for both DL and UL.RLC info on UE side DL. Valid for RLC mode = AM and UM.This attribute may only be chan er. RLC info on UE side DL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson personnel. Value mapping: 0:1 PDU in UE side DL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Special values: -1: not used 10..550 ms with resol detected PDU missing. This value is also used in DL RLC Status Info sent on RRC.RLC info on UE side DL. Valid only for RLC mode = AM.This attribute ma bute may only be changed by Ericsson personnel. Value mapping:-1 Attribute not used.0 1 SDU interval 1 4 SDU intervals 2 16 SDU intervals 3 ute may only be changed by Ericsson personnel. Value mapping:-1 Attribute not used.0 1 PDU interval 1 2 PDU interval 2 4 PDU interval 3 8 PD olling.This attribute may only be changed by Ericsson personnel. Special values:0: not usedUnit: % association between RB and Transport Channel.RB Mapping Info. This attribute may only be changed by Ericsson personnel. apping Info. This attribute may only be changed by Ericsson personnel. Value mapping:0: multiplexing is not performed1: multiplexing is performed ribute may only be changed by Ericsson personnel. Value mapping:0: DCH1: FACH2: DSCH3: HS-DSCH or RLC mode = UM, AM and TM.This attribute may only be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: DCH1: RACH2: CPCH3: E may only be changed by Ericsson personnel. Filter: FDD muxed to single DCH (1 is used for first RB of RRC).RB Mapping Info.This attribute may only be changed by Ericsson personnel. Filter: TDD uxed to single DCH (1 is used for highest priority i.e. for the first RB of RRC).RB Mapping Info.This attribute may only be changed by Ericsson personne : SRB45-32:used by other types of radio bearersThis attribute may only be changed by Ericsson personnel. Filter: TDD nterface to use.RLC info is common to both the RNC side and the UE side.0=Rrc1=Speech2=Udi3=PsInteractive4=CsStreaming5=PsStreamingThis attrib nly be changed by Ericsson personnel.Dependencies: The value used for this RAB is the minimum of maxMacdPduSizeExtended and IurLink::maxMacdP efore a SDU is discarded or reset procedure is initiated.The maximum number of transmissions of a PDU equals MaxDat-1.This attribute may only be ch of a reset PDU.The maximum number of transmissions of a reset PDU equals MaxRst-1.This attribute may only be changed by Ericsson personnel. olling.This attribute may only be changed by Ericsson personnel. Unit: % er. RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel.

l is sent when timer expires and no STATUS is received.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Erics ibute may only be changed by Ericsson personnel. Unit: ms RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Unit: ms them acknowledged. RLC info on RNC side. Valid only for RLC mode = AM. This attribute may only be changed by Ericsson personnel. efore a SDU is discarded or reset procedure is initiated.The number of transmissions is equal to MaxDat - 1.This attribute may only be changed by Erics equals MaxRst-1.This attribute may only be changed by Ericsson personnel. Value mapping:0: MaxRst = 11: 42: 63: 8 olling.This attribute may only be changed by Ericsson personnel. Unit: % er. RLC info on UE side DL. Valid only for SRB with RLC mode = AM. This attribute may only be changed by Ericsson personnel. Value mapping: 0:1 PDU in l is sent when timer expires and no STATUS is received.RLC polling info on UE side UL. Valid only for RLC mode = AM.This attribute may only be change on UE side UL. This attribute may only be changed by Ericsson personnel. Value mapping: 0: 50 ms 1: 100 ms 2: 150 ms ..11: 600 ms12: 700 ms UE side DL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:10..550 ms with resolution 10600 them acknowledged. RLC info on UE side UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping: 0 r for the AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This a the AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This attrib for the AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This att the AAL2 connection between the RNC and RBS for the RRC leg.0: 0 bit/s1: 64 bit/s..32000: 2048000 bit/s (2048 kbit/s)This attrib riptor parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel. Filter: T or parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel. Filter: TDD ptor parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel. Filter: TD r parameter for the AAL2 connection between the RNC and RBS for the RRC leg.This attribute may only be changed by Ericsson personnel. Filter: TDD anged by Ericsson personnel. Filter: TDD e changed by Ericsson personnel. represents.This attribute may only be changed by Ericsson personnel. Special values:Values RB_PS_INTERACTIVE_HS, RB_PS_INTERACTIVE_2, RB_PS_ DCH belongs to. In case of coordinated DCHs, all of them shall have the same attribute value.Frame Handling parameter.This attribute may only be ch This attribute may only be changed by Ericsson personnel. Value mapping: 0: Lowest priority...15: Highest priority tor (to SP and NBAP/RRC).Frame Handling parameter.Note: NBAP/RRC messages use the opposite enumeration as shown below.This attribute may onl er.This attribute may only be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: Normal1: Silent bute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel. Unit: bits his attribute may only be changed by Ericsson personnel. may only be changed by Ericsson personnel. Value mapping:0: 10 ms1: 20 ms2: 40 ms3: 80 ms Unit: ms only be changed by Ericsson personnel. Value mapping:0: No Coding1: Convolutional2: Turbo nly be changed by Ericsson personnel. Value mapping:0: Coding rate = 1/21: Coding rate = 1/3 ged by Ericsson personnel. Value mapping:0: 0 bits1: 82: 123: 164: 24 bitsUnit: bits e may only be changed by Ericsson personnel. Special values:-1: Not Applicable e may only be changed by Ericsson personnel. Unit: bits attribute may only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. Unit: bits attribute may only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. Unit: bits

attribute may only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. Unit: bits attribute may only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. Unit: bits attribute may only be changed by Ericsson personnel. e may only be changed by Ericsson personnel. Unit: bits attribute may only be changed by Ericsson personnel. ay only be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: 10 ms1: 20 ms2: 40 ms3: 80 ms Unit: ms y be changed by Ericsson personnel. Value mapping:0: No Coding1: Convolutional2: Turbo be changed by Ericsson personnel. Value mapping:-1: Not Applicable0: Coding rate = 1/21: Coding rate = 1/3 d by Ericsson personnel. Value mapping:-1: Not Applicable0: 0 bits1: 82: 123: 164: 24 bitsUnit: bits Is) allowed for this TrCH.The first element in the array specifies the maximum TFI for TFC Subset 0, the second element specifies the maximum TFI for T ownlink transport channel.Value mapping: 0: Quality evaluation not used1: Quality evaluation used2: Quality evaluation IE will not be sent in the NBAP his attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf6Dl attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf6Ul his attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf7Dl attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf7Ul his attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf8Dl attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf8Ul his attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf9Dl attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdNoOfTbTf9Ul bute may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf6Dl e may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf6Ul bute may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf7Dl e may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf7Ul bute may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf8Dl e may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf8Ul bute may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf9Dl e may only be changed by Ericsson personnel. Unit: bitsFilter: TDDReplaces: tdSizeOfTbTf9Ul duling when calculating data amounts to be sent downlink. This attribute may only be changed by Ericsson personnel. Filter: TDD er.This attribute may only be changed by Ericsson personnel. Filter: TDD This attribute may only be changed by Ericsson personnel. Change takes effect: Re-initiation of DL TX carrier power measurements easurement reporting.Used by CellLoad Monitor Initialization in Admission Control.The configured value is divided by 10 by the RNC traffic application onitor Initialization in Admission Control.This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect on ower consumption.Used by Cell Load Monitor in Admission Control.This attribute may only be changed by Ericsson personnel. Disturbances:Changing t ower consumption.Used by Cell Load Monitor in Admission Control.This attribute may only be changed by Ericsson personnel. Unit: %Change takes effe account when calculating the ASE. This attribute may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing may only be changed by Ericsson personnel. Change takes effect: Re-initiation of UL RTWP measurements surements between reports A and B.It is recommended to set this attribute to an integral multiple of txInterval (in ms).This attribute may only be chan ed by Congestion Control.This attribute may only be changed by Ericsson personnel. Unit: msFilter: TDD sumption per RL. Unit: 0.01Changing this attribute may affect ongoing traffic.This attribute may only be changed by Ericsson personnel. Filter: TDD

ricsson personnel. Dependencies:The values in this attribute are displayed in the read-only attribute systemDefaultArpQosFilter: FDD delay within the RNC in the transmission of each frame.The actual buffering/processing time is affected by the type of traffic frame (transport block typ elay within the RBS in the transmission of each frame.The actual buffering/processing time is affected by the type of traffic frame (transport block type

s. Used to limit the UE and RNC buffer load reporting intensity.This attribute may only be changed by Ericsson personnel. Value mapping:0: 0.25 s1: 0.5

by Ericsson personnel. Special values.0: the repeat timer not in use, meaning that a downswitch request will not be repeatedValue mapping:1: 50 ms... el switching in case of radio bearer inactivity.This attribute may only be changed by Ericsson personnel. Value mapping:0: Transition to common chann ELL_DCH.This attribute may only be changed by Ericsson personnel. Special values:0: do not release (no need to start measurements or algorithm)Unit:

: New connectionFilter: FDD : New connectionFilter: FDD ct: New connectionFilter: FDD ct: New connectionFilter: FDD TI .This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD rom the RRC message containing the IE DTX-DRX information.This attribute may only be changed by Ericsson personnel.Change takes effect: New conn DCH transmissions are never restricted to the MAC DTX pattern when it is set to 0 (=infinity).This attribute may only be changed by Ericsson personnel. priority than the DTX pattern when it is set to -1 (=infinity). This attribute may only be changed by Ericsson personnel.Change takes effect: New conne

HS-SCCH set continuously.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD ells in the serving E-DCH radio link set, for EUL 2ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionF ells in the serving E-DCH radio link set, for EUL 10ms TTI.This attribute may only be changed by Ericsson personnel.Change takes effect: New connection e DRX reception pattern.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD w connectionFilter: FDD w connectionFilter: FDD Ericsson personnel.Change takes effect: New connectionFilter: FDD PC connections are configured with a pre-defined hardcoded parameter set(CPC profile). If ON, the static configuration associated with the CPC profile ber of the first transmission gap slot within the first radio frame of the transmission gap pattern. This attribute may only be changed by Ericsson person personnel. Value mapping:Possible values for GSM carrier RSSI Measurement are 3, 4, 5, 7, 10, 14.Possible values for Initial BSIC identification are 7, 10 on personnel. Dependencies:If this parameter is not explicitly set by higher layers, then tGL2 = tGL1. Value mapping:Possible values for GSM carrier RSS Initial value (set by system) for GSM carrier RSSI Measurement ("CpmTransGapPattSeq=1") is 8.Initial value (set by system) for Initial BSIC identification nitial value (set by system) for GSM carrier RSSI Measurement ("CpmTransGapPattSeq=1") is 8.Initial value (set by system) for Initial BSIC identification anged by Ericsson personnel. Special values:0 means infinity. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, rameter is not set by higher layers, then there is only one transmission gap in the transmission gap pattern. If there is only one transmission gap in the nge takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS. his attribute may only be changed by Ericsson personnel. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRN n personnel. Value mapping:1: 0.5 s2: 1.0 s3: 1.5 s...11: 5.5 s...20: 10.0 sUnit: 0.5 sChange takes effect: Next configuration of the transmission gap patt This attribute may only be changed by Ericsson personnel. Special values:Initial value (set by system) for GSM carrier RSSI measurement ("CpmTransGa

o set tProcRncUl + toAWEUl + toAEUl <= 640 [ms] It is recommended to set toAWSUl <= toAEUlUnit: ms

ged by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD sonnel. Disturbances:Changing this attribute may affect ongoing traffic.Filter: FDD

n personnel.Dependencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell manually before ch son personnel.Disturbances:Changing this attribute may affect ongoing traffic.Filter: TDDReplaces: tdTfcs te may only be changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Dependencies:Before changing this attri e changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Dependencies:Before changing this attribute, check i 1.0 s...50: 10 sUnit: 0.2 sChange takes effect: Ongoing connections (next switch to CELL_DCH)

mmand or Cell change failure from UTRAN within this amount of time.This attribute may only be changed by Ericsson personnel. Unit: sChange takes eff his extra delay will decrease the risk for the UE not to get the initial cell list , since initially it is busy to get synchronized to UTRAN.This attribute may on mapping:0: 0.0 s1: 0.2 s2: 0.4 s3: 0.6 s4: 0.8 s5: 1.0 s...50: 10 sUnit: 0.2 sChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

alue mapping:1: 0.5 s2: 1.0 s...10: 5.0 sUnit: 0.5 sChange takes effect: New connections bute may only be changed by Ericsson personnel. Filter: FDD

s attribute may only be changed by Ericsson personnel. Dependencies: Changing this attribute may affect ongoing traffic.

cleLengthPs, cnDrxCycleLengthCs, utranDrxCycleLength] To allow the UE to measure, when applicable, on another frequency when reading MCCH ther frames, equals [2^m DIV 2^r], where m is the modification period coefficient.[2^m DIV 2^r] >= nrOfRrcFrames, where nrOfRrcFrames defines the n kbps.The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to the number of frames that can be .The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to the number of frames that can be sche er data rate 7.6 kbps.The values of the mbmsModificationPeriodCoeff (m) and mbmsRepetitionPeriodCoeff (r) have dependencies to the number of fra ment should be transmitted in every frame within a defined interval. This interval will be within a specific cycle interval similarly defined as DRX cycle l ct ongoing traffic.Filter: FDD

ct ongoing traffic.Change takes effect: New connectionsFilter: FDD ct ongoing traffic.Change takes effect: New connectionsFilter: FDD ongoing traffic.Change takes effect: New connections ongoing traffic.Change takes effect: New connectionsFilter: FDD bute may affect ongoing traffic.Unit: 10 msChange takes effect: New connections pdate of system information is initiated in that cell.This attribute may only be changed by Ericsson personnel. Value mapping:30: 3.0 dB31: 3.1 dB...60: ed change of the downlink power (due to downlink power balancing) of at most 1 dB every 1 slot. 10 corresponds to an allowed change of the downlin

son personnel. Unit: dBChange takes effect: New connectionsFilter: FDD sson personnel. Resolution: 10Unit: msChange takes effect: New connectionsFilter: FDD nged by Ericsson personnel. Change takes effect: New connectionsFilter: FDD ged by Ericsson personnel. Unit: radio frame (10 ms)Change takes effect: New connections y only be changed by Ericsson personnel. Value mapping: 1: 0,1 2: 0,2...10: 1,0Change takes effect: New connections n personnel. Dependencies: Changing this attribute may affect traffic.Change takes effect: New connectionsFilter: FDD

nged by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD ay only be changed by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD hanged by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD e may only be changed by Ericsson personnel. Unit: 0.1 dBChange takes effect: New connectionsFilter: FDD kes effect: New connectionsFilter: FDD

t E2: Event F3: Both (1&2)Filter: FDD

e mapping:0: 0.0 dB...4: 2.0 dB...20: 10.0 dBUnit: 0.5 dBFilter: FDD smission capability due to high spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personnel. Dependencies:Note nsmission capability due to high spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personnel. Dependencies:Note efers to high data transmission capability due to low spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personne efers to high data transmission capability due to low spreading factor.Used by Power Control.This attribute may only be changed by Ericsson personne h data transmission capability due to very low spreading factor. Used by Power Control.This attribute may only be changed by Ericsson personnel. Depe h data transmission capability due to very low spreading factor. Used by Power Control.This attribute may only be changed by Ericsson personnel. Depe ed by Ericsson personnel. Unit: radio frame (10 ms)Filter: FDD relative to the value of UtranCell::pccpchPower.This attribute may only be changed by Ericsson personnel.Unit: 0.1 dBFilter: TDDReplaces: tdDefaultIn ECTION SETUP message, the value of this attribute is used for the parameter ul-TargetSIR.This attribute may only be changed by Ericsson personnel.Un

performed in the same way for 2 ms and 10 ms TTI, with this constant as input, but the values shall then be rounded up differently depending on the u dB 1: -35.5 dB...34: -19.0 dB...72: 0.0 dBDisturbances:Changing this attribute may affect ongoing traffic.Unit: 0.5 dBFilter: FDD PEH file(s) from the persistent storage to make space for a new file, and GPEH recording will continue.This attribute may only be changed by Ericsson p will remove the oldest recording file and continue. If the recordingStorageSize is completely used by a single recording file, the PM Recording function the source cell and the target cell. This attribute may only be changed by Ericsson personnel. Unit: %Change takes effect: Immediately pendencies:hsCellChangeCfnOffset >= hsMacdSwitchTimeOffsetFilter: FDD only be changed by Ericsson personnel. Dependencies:hsMacdSwitchTimeOffset <= hsCellChangeCfnOffsetUnit: frame by Ericsson personnel.Unit: ms sent towards RBS. The interval is valid per flow controlled flow, regardless of which type of TCI that are sent, e.g. with code 2 or 3. This attribute may o is set to zero, no DRT Extensions are sent (the feature is turned OFF). This attribute may only be changed by Ericsson personnel. Unit: msResolution: 10 ce of these CAPACITY ALLOCATION control frames in RNC is that a CA shall be received at least every one second time interval (more often or once per n/100). This attribute may only be changed by Ericsson personnel. Unit: %Change takes effect: New connections edchDataFrameDelayThresholdThis attribute may only be changed by Ericsson personnel. Unit: %

Value mapping:-360: -36.0 dB-355: -35.5 dB... -190: -19.0 dB... -5: -0.5 dB0: 0 dBUnit: 0.1 dBResolution: 5Change takes effect: ImmediatelyFilter: FDD ttribute may only be changed by Ericsson personnel. CHANNEL RECONFIGURATION COMPLETE or RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed by Ericsson perso : sThis attribute may only be changed by Ericsson personnel. anged by Ericsson personnel. ribute may only be changed by Ericsson personnel. tribute may only be changed by Ericsson personnel. ADIO LINK SETUP RESPONSE.Unit: sThis attribute may only be changed by Ericsson personnel. P RADIO LINK SETUP RESPONSE.Unit: sThis attribute may only be changed by Ericsson personnel.

ETE or RADIO BEARER RECONFIGURATION COMPLETE.Unit: sThis attribute may only be changed by Ericsson personnel. TIVE SET UPDATE COMPLETE or RRC ACTIVE SET UPDATE FAILURE.Unit: sThis attribute may only be changed by Ericsson personnel. NBAP RADIO LINK ADDITION RESPONSE or NBAP RADIO LINK ADDITION FAILURE or NBAP ERROR INDICATION.Unit: sThis attribute may only be changed f RNSAP RADIO LINK ADDITION RESPONSE or RNSAP RADIO LINK ADDITION FAILURE or RNSAP ERROR INDICATION.Unit: sThis attribute may only be ch

: 400 ms3: 600 ms4: 800 ms5: 1000 ms6: 1200 ms7: 1400 ms8: 1600 ms9: 1800 ms10: 2000 ms11: 3000 ms12: 4000 ms13: 6000 ms14: 8000 msChang Cell Update. This attribute may only be changed by Ericsson personnel. 0: 100 ms1: 200 ms2: 400 ms3: 600 ms4: 800 ms5: 1000 ms6: 1200 ms7: 1400 m takes effect: New connections his attribute.This attribute may only be changed by Ericsson personnel. Unit: s

ect: New connections

onnel. Change takes effect: New connections t: New connections

et longer than t313, assuming 1 frame = 10 ms.

Dependencies:Must be set longer than n315, assuming 1 frame = 10 ms.Unit: s RB on DCH-DL. This system constant can be calculated in the following way: cfnOffsetSrbDchDl = 2*TTI_Alignment_DL + TTI_Alignment_UL + UE_Proce em constant can be calculated in the following way: cfnOffsetSrbHs = TTI_Alignment_DL+ TTI_Alignment_UL+ UE_Processing_UL_and_DL Default value with the correct sduSize parameters e.g. SID + an AMR rate.This attribute may only be changed by Ericsson personnel.

ed1: Erroneous SDUs are not delivered2: No check if SDUs are erroneous

ping:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD changed by Ericsson personnel. Value mapping:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD lue mapping:0: False1: TrueChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD onitored set cells4 : Detected set cells5 : Detected set cells and monitored set cellsChange takes effect: Ongoing connections (next switch to CELL_DCH -frequency measurement reporting (in CELL_DCH). This attribute may only be changed by Ericsson personnel. Value mapping:0: 11: 22: 4...6: 647: i cells + 12 : Virtual/Active set cells + 23 : Virtual/Active set cells + 34 : Virtual/Active set cells + 45 : Virtual/Active set cells + 56 : Virtual/Active set cells set cellsChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD pping:0: 11: 22: 4...6: 647: infinityChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD cells + 12 : Virtual/Active set cells + 23 : Virtual/Active set cells + 34 : Virtual/Active set cells + 45 : Virtual/Active set cells + 56 : Virtual/Active set cells + kes effect: Ongoing connections (next switch to CELL_DCH) : False1 : TrueChange takes effect: Ongoing connections (next time that inter-RAT measurements are started) cells + 12: Virtual/Active set cells + 23: Virtual/Active set cells + 34: Virtual/Active set cells + 45: Virtual/Active set cells + 56: Virtual/Active set cells + 6C

takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD nged by Ericsson personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started)Filter: FDD on personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started)Filter: FDD on personnel. Change takes effect: Ongoing connections (next time that inter-frequency measurements are started) anged by Ericsson personnel. Unit: dBChange takes effect: New connectionsFilter: FDD pe 2Filter: TDDReplaces: tdRachSfnSfnTimeDiffRepInd ed by Ericsson personnel. Unit: dBm Change takes effect: New connectionsFilter: TDD lue mapping:0: Conversational1: Streaming2: Interactive3: Background DL2: Asymmetric Unidirectional UL3: Asymmetric Bidirectional

SDU is defined as the time from a request to transfer of an SDU at one SAP to its delivery to the other SAP.Used to specify the delay tolerated by the ap

Value mapping:0:

0 bps1:

64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps

lue mapping:0: Value mapping:0: ue mapping:0:

0 bps1: 0 bps1: 0 bps1:

64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps 64 bps...32000: 2048000 bps (2048 kbps)Unit: 64 bps

edure. The maximum number of repeated attempts is defined in noIucInitRep.This attribute may only be changed by Ericsson personnel. Special values ues:0 is used to indicate that noIucInitRep is not in use.Change takes effect: New connections

nteractive).Unit: 1 bpsThis attribute may only be changed by Ericsson personnel. Filter: TDD eractive).Unit: 1 bpsThis attribute may only be changed by Ericsson personnel. Filter: TDD CFN (RNSAP and NBAP) shall be set when starting compressed mode.This attribute may only be changed by Ericsson personnel. Value mapping:1: 752 mpressed mode.This attribute may only be changed by Ericsson personnel. Value mapping:1: 1002: 1503: 200Change takes effect: Next stop of CPM wed 1 : allowedChange takes effect: Ongoing connections (next change of RC state) nd their interpretation.Dependencies: This attribute has the same value as the value part of the RDN (UeRcId). ext change of RC state)Filter: FDD

ext change of RC state) This attribute may only be changed by Ericsson personnel.Filter: FDD

C that will result in the maximum number of TB's with largest size being applied).This attribute may only be changed by Ericsson personnel. Filter: TDD

c instance.This attribute may only be changed by Ericsson personnel.

ws under a specific UeRc instance.This attribute may only be changed by Ericsson personnel. Unit: msChange takes effect: New connections _RRC, RB_PS_INTERACTIVE and RB_PS_INTERACTIVE_2 are applicable for this attribute and MO (even though the other values are allowed to be set).

MIMO or Multi-Carrier is used for a HS-DSCH connection, the value signaled is min(32, 2 * macHsWindowSize).This attribute may only be changed by Eri MAC-hs SDUs from the HSDPA Priority Queues. The parameter value setting is signaled via NBAP.This attribute may only be changed by Ericsson personn d via NBAP and RRC.This attribute may only be changed by Ericsson personnel.Unit: ms

2, RB_PS_INTERACTIVE_HS_3, and RB_PS_STREAMING_HS are applicable for this attribute and MO (even though the other values are allowed to be set

F 512"}$TDD{"Value mapping:0: SF 11: SF 16"}

nel. Value mapping:0: No = TFCI not present; same as "TFCI existence" = FALSE1: Yes = TFCI present; same as "TFCI existence" = TRUE

256. In all other cases the UE calculates the number of pilot bits based on slot format information. The number of pilot bits is not signaled towards the R personnel.Filter: TDDReplaces: tdCcTrChId

his attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdOtherTimeSlotFormat 44%2: 48%...15: 100% Filter: TDDReplaces: tdPunctureLimit

_v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 changed by Ericsson personnel.Disturbances:Changing this attribute will affect ongoing traffic.Filter: TDDReplaces: tdTddDpchOffsetValue word bits.v8 corresponds to 12 TFCI code word bits.v16 corresponds to 24 TFCI code word bits.v32 corresponds to 48 TFCI code word bits.This attribute D, "TSTD indicator" can be defined and used to inform the application of TSTD to DPCH.This attribute may only be changed by Ericsson personnel.Value

d by the UE capability and restrictions imposed by UTRAN.This attribute may only be changed by Ericsson personnel. Resolution: 4

changed by Ericsson personnel. Unit: % bute may only be changed by Ericsson personnel. Unit: % changed by Ericsson personnel. Unit: % ation.Value mapping:0: No multiplexing except among scheduled flows.1: Multiplexing among non-scheduled flows allowed except between SRB and a ) would exceed the available maximum power, the UE shall firstly reduce the E-DPDCH power with the E-DPDCH gain factor so that the total transmit p

F 512"}$TDD{"Value mapping:0: SF 11: SF 22: SF 43: SF 84: SF 16 "}

44 %2: 48 %...15: 100 %Unit: % DReplaces: td2ndInterleavingMode ersonnel. Filter: TDDReplaces: tdCcTrChId mber of time slots and least number of channels). This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdDpchSlotFormat

his attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdOtherTimeSlotFormat

d_v43: RepetitionPeriod_v84: RepetitionPeriod_v165: RepetitionPeriod_v326: RepetitionPeriod_v64Specification: Chapter 8.6.6.16 in TS 25.331 V4.17. ecialBurstScheduling changed by Ericsson personnel.Disturbances:Changing this attribute will affect ongoing traffic.Filter: TDDReplaces: tdTddDpchOffsetValue word bits.v8 corresponds to 12 TFCI code word bits.v16 corresponds to 24 TFCI code word bits.v32 corresponds to 48 TFCI code word bits.This attribute ces: tdUlSynchronizationStepFrequency ces: tdUlSynchronizationStepSize et).This attribute may only be changed by Ericsson personnel. it/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD .32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD y only be changed by Ericsson personnel. Filter: TDD nly be changed by Ericsson personnel. Filter: TDD bit/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD ..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD

ay only be changed by Ericsson personnel. Filter: TDD nly be changed by Ericsson personnel. Filter: TDD ADCH, RB_PACKET_ADCH_2, RB_PACKET_ADCH_3 and RB_STREAMING_ADCH are not applicable for this attribute and MO (but are nonetheless allow ated Control Ch. Valid only on DCS side1: DTCH Dedicated Traffic Ch. Valid only on DCS side2: BCCH Broadcast Control Channel. Valid only on CCS side.3 rent (TM)2: Unacknowledged (UM)This attribute may only be changed by Ericsson personnel. M.This attribute may only be changed by Ericsson personnel. Special values:0: not used Unit: ms al values:0: not used Unit: ms csson personnel. Value mapping:0: poll not used1: poll used Ericsson personnel. Value mapping:0: poll not used1: poll used hanged by Ericsson personnel. Value mapping:0: RNC shall not send STATUS reports1: RNC shall send STATUS reports ly be changed by Ericsson personnel.

son personnel. Value mapping:0: the value can be configured but in-sequence delivery will still be used, that is, in-sequence delivery is predefined.1: in equals MaxDat-1.RLC info on RNC side. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. ide. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel.

n be configured but is not used)1: Timer Based No Explicit (can be configured but is not used)2: Max Dat (can be configured but is not used)3: No Discar 1.RLC info on UE side UL. Valid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping: 2: MaxDat = 3 3: only be changed by Ericsson personnel. Value mapping: 0:1 Max PDU sent 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 1 100 ms 2: 150 ms ..11: 600 ms12: 700 ms..15: 1000 msUnit: ms e mapping:0: MaxRst = 11: 42: 63: 84: 125: 166: 247: MaxRst =32 l values: -1: not used 10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms mode = AM.This attribute may only be changed by Ericsson personnel. Special values:-1: not used 10 .. 550 ms with resolution 10600 ..1000ms with re smission Poll1: last PDU in Transmission Poll transmission Poll1: last PDU in Retransmission Poll = AM and UM.This attribute may only be changed by Ericsson personnel. Value mapping:0: in-sequence delivery shall not be used1: in-sequence delive Ericsson personnel. Value mapping: 0:1 PDU in buffer 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14 cial values: -1: not used 10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms alid only for RLC mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:0: UE shall not send STATUS reports1: UE shall al 1 4 SDU intervals 2 16 SDU intervals 3 64 SDU intervals al 1 2 PDU interval 2 4 PDU interval 3 8 PDU interval 4 16 PDU interval 5 32 PDU interval 6 64 PDU interval 7 128 PDU interval

not performed1: multiplexing is performed

g:-1: Not Applicable0: DCH1: RACH2: CPCH3: E-DCH

y Ericsson personnel. Filter: TDD te may only be changed by Ericsson personnel. Filter: TDD

active4=CsStreaming5=PsStreamingThis attribute may only be changed by Ericsson personnel. Filter: TDD MacdPduSizeExtended and IurLink::maxMacdPduSizeExtendedUnit: bytesChange takes effect: New connections equals MaxDat-1.This attribute may only be changed by Ericsson personnel. y only be changed by Ericsson personnel.

M.This attribute may only be changed by Ericsson personnel. Unit: ms

nged by Ericsson personnel. 1.This attribute may only be changed by Ericsson personnel. Value mapping: 2: MaxDat = 3 3: 4 4: = 11: 42: 63: 84: 125: 166: 247: MaxRst =32

5 5:

6 6:

Ericsson personnel. Value mapping: 0:1 PDU in buffer 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14 mode = AM.This attribute may only be changed by Ericsson personnel. Value mapping:10 .. 550 ms with resolution 10600 ..1000ms with resolution 50 100 ms 2: 150 ms ..11: 600 ms12: 700 ms..15: 1000 msUnit: ms ue mapping:10..550 ms with resolution 10600..1000ms with resolution 50Unit: ms anged by Ericsson personnel. Value mapping: 0:1 Max PDU sent 1:8 2:16 3:32 4:64 5:128 6:256 7:512 8:768 9:1024 10:1536 11:2047 12:2560 13 bit/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD ..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD t/s..32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD .32000: 2048000 bit/s (2048 kbit/s)This attribute may only be changed by Ericsson personnel. Filter: TDD nly be changed by Ericsson personnel. Filter: TDD be changed by Ericsson personnel. Filter: TDD ly be changed by Ericsson personnel. Filter: TDD e changed by Ericsson personnel. Filter: TDD

RACTIVE_HS, RB_PS_INTERACTIVE_2, RB_PS_INTERACTIVE_3, RB_PS_INTERACTIVE_HS_2, RB_PS_INTERACTIVE_HS_3, RB_PACKET_ADCH_2 and RB_P dling parameter.This attribute may only be changed by Ericsson personnel.

eration as shown below.This attribute may only be changed by Ericsson personnel. Value mapping:0: False1: True

cond element specifies the maximum TFI for TFC Subset 1, and so forth."}$TDD{"Element [0] is used as the equivalent of rateMatchingAttrDlTdd: Rate uality evaluation IE will not be sent in the NBAP message.This attribute may only be changed by Ericsson personnel. Filter: TDDReplaces: tdDlQeSelecto

n personnel. Filter: TDD

ier power measurements is divided by 10 by the RNC traffic application before it is sent on NBAP to RBS.This attribute may only be changed by Ericsson personnel. Disturbances rbances:Changing this attribute may affect ongoing traffic.Change takes effect: Re-initiation of Admission Control measurements y Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic. Whenever its value is set, the cell is disabled automatically and t y Ericsson personnel. Unit: %Change takes effect: Immediately es:Changing this attribute may affect ongoing traffic. Whenever its value is set, the cell is disabled automatically and then re-enabled.Change takes ef

nterval (in ms).This attribute may only be changed by Ericsson personnel. Unit: 10 msFilter: TDD

changed by Ericsson personnel. Filter: TDD

emDefaultArpQosFilter: FDD y the type of traffic frame (transport block type) as well as load, processing type, etc. If this value is set too low, frames may be lost or discarded (due t the type of traffic frame (transport block type) as well as load, processing type, etc. If this value is set too low, frames may be lost or discarded (due to

csson personnel. Value mapping:0: 0.25 s1: 0.5 s2: 1 s3: 2 s4: 4 s5: 8 s6: 16 sChange takes effect: New connections

will not be repeatedValue mapping:1: 50 ms...4: 200 ms...40: 2000msUnit: 50 msChange takes effect: New connections alue mapping:0: Transition to common channel (RACH/FACH) is not allowed1: Transition to common channel (RACH/FACH) is allowedChange takes effe eed to start measurements or algorithm)Unit: sChange takes effect: New connections

sson personnel.Change takes effect: New connectionFilter: FDD e may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD on personnel.Change takes effect: New connectionFilter: FDD

: New connectionFilter: FDD rsonnel.Change takes effect: New connectionFilter: FDD ersonnel.Change takes effect: New connectionFilter: FDD New connectionFilter: FDD

configuration associated with the CPC profile is overridden by the values set for the parameters of the MO CPC.This attribute may only be changed by ribute may only be changed by Ericsson personnel. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or R e values for Initial BSIC identification are 7, 10, 14.Possible values for BSIC re-confirmation are 7, 10, 14.Possible values for Inter Frequency measureme e mapping:Possible values for GSM carrier RSSI Measurement are 3, 4, 5, 7, 10, 14.Possible values for Initial BSIC identification are 7, 10, 14.Possible va ue (set by system) for Initial BSIC identification ("CpmTransGapPattSeq=2") is 8.Initial value (set by system) for BSIC re-confirmation ("CpmTransGapPat e (set by system) for Initial BSIC identification ("CpmTransGapPattSeq=2") is 8.Initial value (set by system) for BSIC re-confirmation ("CpmTransGapPatt the transmission gap pattern sequence in UE, DRNC or RBS. rn. If there is only one transmission gap in the transmission gap pattern, this parameter shall be set to 0.This attribute may only be changed by Ericsson

ransmission gap pattern sequence in UE, DRNC or RBS. ext configuration of the transmission gap pattern sequence in UE, DRNC or RBS. GSM carrier RSSI measurement ("CpmTransGapPattSeq=1") is 0.Initial value (set by system) for Initial BSIC identification ("CpmTransGapPattSeq=2") is

lock the parent UtranCell manually before changing both.Disturbances:Changing this attribute may affect ongoing traffic.Unit: 4 %Filter: TDDReplaces

raffic.Dependencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell manually before changing dencies:Before changing this attribute, check if tfcs needs to be changed as well. If so, lock the parent UtranCell manually before changing both.Filter: T

by Ericsson personnel. Unit: sChange takes effect: New connections t synchronized to UTRAN.This attribute may only be changed by Ericsson personnel. Unit: sChange takes effect: Ongoing connections nections (next switch to CELL_DCH)Filter: FDD

n another frequency when reading MCCH there has to be some gaps in the MCCH transmission (the MP shall not be fully utilized). Note: The UE and SG cFrames, where nrOfRrcFrames defines the number of frames the MCCH information requires in each Repetition Period. (Note: nrOfRrcFrames is not a ndencies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kbps. Parameters nonPlSessionsMax, p ncies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kbps. Parameters nonPlSessionsMax, plSess eff (r) have dependencies to the number of frames that can be scheduled per Repetition Period on MCCH with the data rate 7.6 kbps. Parameters nonP c cycle interval similarly defined as DRX cycle length.Special values:Initially set by the system to 9 (corresponds to cycle length 5,120 s).This attribute m

nnel. Value mapping:30: 3.0 dB31: 3.1 dB...60: 6.0 dBUnit: 0.1 dBFilter: FDD responds to an allowed change of the downlink power of at most 1 dB every 10 slots.maxAdjustmentStep = 1 corresponds to a limit on rate of change

ed by Ericsson personnel. Dependencies:Note that either gainFactorCLow or gainFactorDLow must be equal to 15.Filter: FDD ed by Ericsson personnel. Dependencies:Note that either gainFactorCLow or gainFactorDLow must be equal to 15. te may only be changed by Ericsson personnel. Dependencies:Note that either gainFactorCHigh or gainFactorDHigh must be equal to 15.Filter: FDD te may only be changed by Ericsson personnel. Dependencies:Note that either gainFactorCHigh or gainFactorDHigh must be equal to 15. y only be changed by Ericsson personnel. Dependencies:gainFactorCExtraHigh or gainFactorDExtraHigh must be equal to 15 y only be changed by Ericsson personnel. Dependencies:gainFactorCExtraHigh or gainFactorDExtraHigh must be equal to 15Filter: FDD

el.Unit: 0.1 dBFilter: TDDReplaces: tdDefaultInitDlTransPower may only be changed by Ericsson personnel.Unit: dBmFilter: TDDReplaces: tdDefaultPrxDpchDes

be rounded up differently depending on the used TTI. This attribute may only be changed by Ericsson personnel. Dependencies: The same constant is fic.Unit: 0.5 dBFilter: FDD is attribute may only be changed by Ericsson personnel.Dependencies: The size of the GPEH file may never exceed the available GPEH storage size on e gle recording file, the PM Recording function will stop the recording until the next ROP begins.This attribute may only be changed by Ericsson personn nge takes effect: Immediately

ent, e.g. with code 2 or 3. This attribute may only be changed by Ericsson personnel. Unit: msResolution: 50 by Ericsson personnel. Unit: msResolution: 10Change takes effect: New connections second time interval (more often or once per second). If this doesn't happen, it is likely that a CA is dropped over the transport network. Further on, if

Change takes effect: ImmediatelyFilter: FDD

tribute may only be changed by Ericsson personnel.

ed by Ericsson personnel. ION.Unit: sThis attribute may only be changed by Ericsson personnel. DICATION.Unit: sThis attribute may only be changed by Ericsson personnel.

ms12: 4000 ms13: 6000 ms14: 8000 msChange takes effect: New connections 00 ms4: 800 ms5: 1000 ms6: 1200 ms7: 1400 ms8: 1600 ms9: 1800 ms10: 2000 ms11: 3000 ms12: 4000 ms13: 6000 ms14: 8000 ms

lignment_DL + TTI_Alignment_UL + UE_Processing_UL_and_DL Default value is calculated as: 2*4+4+6=18 radio frames Unit: 10 msChange takes effec UL+ UE_Processing_UL_and_DL Default value is calculated as: 2+10+60ms=72ms=8 radio framesUnit: 10 msChange takes effect: At next synchronized

(next switch to CELL_DCH)Filter: FDD

Ongoing connections (next switch to CELL_DCH)Filter: FDD nnel. Value mapping:0: 11: 22: 4...6: 647: infinityChange takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD /Active set cells + 56 : Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

/Active set cells + 56 : Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

ctive set cells + 56: Virtual/Active set cells + 6Change takes effect: Ongoing connections (next switch to CELL_DCH)Filter: FDD

easurements are started)Filter: FDD are started)Filter: FDD

P.Used to specify the delay tolerated by the application. It allows UTRAN to set transport formats and ARQ parameters.This attribute may only be chang

changed by Ericsson personnel. Special values:0 is used to indicate that iucInitTimer is not in use.Unit: sChange takes effect: New connections

d by Ericsson personnel. Value mapping:1: 752: 1203: 150Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRN : 200Change takes effect: Next stop of CPM

be changed by Ericsson personnel. Filter: TDD

nge takes effect: New connections ugh the other values are allowed to be set).

Size).This attribute may only be changed by Ericsson personnel. bute may only be changed by Ericsson personnel.Unit: ms

though the other values are allowed to be set).This attribute may only be changed by Ericsson personnel. Filter: FDD

me as "TFCI existence" = TRUE

mber of pilot bits is not signaled towards the RBS. For downlink physical connections using other spreading factors, the configured value will not be us

fication: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod Replaces: tdTddDpchOffsetValue ponds to 48 TFCI code word bits.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdTfciCoding y only be changed by Ericsson personnel.Value mapping:0: active1: inactive Filter: TDDReplaces: tdTstdIndicator

n personnel. Resolution: 4

uled flows allowed except between SRB and a non-scheduled SIP (if exists), among scheduled flows allowed, but not between scheduled and non-sched DPDCH gain factor so that the total transmit power would be equal to the available maximum power. If the total transmit power is still higher than the

el. Filter: TDDReplaces: tdDpchSlotFormat

ification: Chapter 8.6.6.16 in TS 25.331 V4.17.0 Filter: TDDReplaces: tdRepetitionPeriod

Replaces: tdTddDpchOffsetValue sponds to 48 TFCI code word bits.This attribute may only be changed by Ericsson personnel.Filter: TDDReplaces: tdTfciCoding

s attribute and MO (but are nonetheless allowed to be set). dcast Control Channel. Valid only on CCS side.3: CCCH Common Control Channel. Valid only on CCS side.4: PCCH Paging Control Channel. Valid only on C

hat is, in-sequence delivery is predefined.1: in-sequence delivery shall be used d by Ericsson personnel.

can be configured but is not used)3: No Discard (AM), SDU Discard not configured (TM and UM) personnel. Value mapping: 2: MaxDat = 3 3: 4 4: 5 5: 6 6: 256 7:512 8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584 247: MaxRst =32

50 ms with resolution 10600 ..1000ms with resolution 50Unit: ms

delivery shall not be used1: in-sequence delivery shall be used 1024 10:1536 11:2047 12:2560 13:3072 14:3584 15:4095

: UE shall not send STATUS reports1: UE shall send STATUS reports

DU interval 7 128 PDU interval

7 7:

8 8:

9 9:

1010

4 4:

5 5:

6 6:

7 7:

8 8:

9 9:

1010:

1511:

2012:

2513:

1024 10:1536 11:2047 12:2560 13:3072 14:3584 15:4095 resolution 10600 ..1000ms with resolution 50Unit: ms

8:768 9:1024 10:1536 11:2047 12:2560 13:3072 14:3584

ACTIVE_HS_3, RB_PACKET_ADCH_2 and RB_PACKET_ADCH_3, RB_PS_STREAMING_HS are not applicable for this attribute and MO (but are nonetheles

he equivalent of rateMatchingAttrDlTdd: Rate matching attribute in downlink.Element [1] is used as the equivalent of rateMatchingAttrUlTdd: Rate ma personnel. Filter: TDDReplaces: tdDlQeSelector

changed by Ericsson personnel. Disturbances:Changing this attribute may affect ongoing traffic.Unit: msResolution: 100Change takes effect: Re-initiat n Control measurements e is set, the cell is disabled automatically and then re-enabled.Change takes effect: Object disabled/enabledUnit: %

matically and then re-enabled.Change takes effect: Object disabled/enabledUnit: 0.01

oo low, frames may be lost or discarded (due to too-late arrival).This attribute may only be changed by Ericsson personnel. Unit: ms o low, frames may be lost or discarded (due to "too late" arrival).This attribute may only be changed by Ericsson personnel. Unit: ms

nnel (RACH/FACH) is allowedChange takes effect: New connections

MO CPC.This attribute may only be changed by Ericsson personnel.Change takes effect: New connectionFilter: FDD ission gap pattern sequence in UE, DRNC or RBS. ossible values for Inter Frequency measurements are 7, 10, 14.Since the value ranges are different for each pattern sequence, the system will not chec tial BSIC identification are 7, 10, 14.Possible values for BSIC re-confirmation are 7, 10, 14.Possible values for Inter Frequency measurements are 7, 10, m) for BSIC re-confirmation ("CpmTransGapPattSeq=3") is 8.Initial value (set by system) for Inter Frequency measurements ("CpmTransGapPattSeq=4" ) for BSIC re-confirmation ("CpmTransGapPattSeq=3") is 8.Initial value (set by system) for Inter Frequency measurements ("CpmTransGapPattSeq=4")

his attribute may only be changed by Ericsson personnel. Special values:0 means undefinedChange takes effect: Next configuration of the transmission

C identification ("CpmTransGapPattSeq=2") is 2.Initial value (set by system) for BSIC reconfirmation ("CpmTransGapPattSeq=3") is 6.Initial value (set by

ct ongoing traffic.Unit: 4 %Filter: TDDReplaces: tdSccpchPunctureLimit

he parent UtranCell manually before changing both. Filter: TDD anCell manually before changing both.Filter: TDD

effect: Ongoing connections

hall not be fully utilized). Note: The UE and SGSN can negotiate the value of the cnDrxCycleLengthPs. This case can not be handled by the system. This epetition Period. (Note: nrOfRrcFrames is not a parameter but only a definition in the above equation.)This attribute may only be changed by Ericsson p ate 7.6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of frames to be scheduled in a worst case sce .6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of frames to be scheduled in a worst case scenario with the data rate 7.6 kbps. Parameters nonPlSessionsMax, plSessionsMax and neighbourCellsMax put limits on number of frames to be scheduled in ponds to cycle length 5,120 s).This attribute may only be changed by Ericsson personnel.

= 1 corresponds to a limit on rate of change of 1 dB/slot.maxAdjustmentStep = 10 corresponds to a limit on rate of change of 0.1 dB/slot.This attribu

ual to 15.Filter: FDD

actorDHigh must be equal to 15.Filter: FDD actorDHigh must be equal to 15.

must be equal to 15Filter: FDD

rsonnel. Dependencies: The same constant is defined in the RBS for the scheduler. These constants should be set to the same value. Unit: kbps (1000 b

er exceed the available GPEH storage size on each MP (gpehStorageSize >= gpehFileSize).Unit: kB (1000 bytes)Change takes affect: Next ROP ute may only be changed by Ericsson personnel. Dependencies: The file sizes for UETR and CTR recordings may never exceed the available recording st

ped over the transport network. Further on, if several CA control frames are dropped, not received in RNC, it could mean that the best effort type of tr

ms13: 6000 ms14: 8000 ms

8 radio frames Unit: 10 msChange takes effect: At next synchronized reconfiguration of the connection This attribute may only be changed by Ericsson msChange takes effect: At next synchronized reconfiguration of the connection.This attribute may only be changed by Ericsson personnel.

ch to CELL_DCH)Filter: FDD o CELL_DCH)Filter: FDD

o CELL_DCH)Filter: FDD

ELL_DCH)Filter: FDD

Q parameters.This attribute may only be changed by Ericsson personnel. Unit: ms

hange takes effect: New connections

ransmission gap pattern sequence in UE, DRNC or RBS.

ng factors, the configured value will not be used by the RNC, but has to be set anyway since the parameter is defined as mandatory in the MOM. Any o

places: tdTfciCoding

ed, but not between scheduled and non-scheduled flows.2: All multiplexing allowed except between SRB and scheduled flows or non-scheduled SIP (if he total transmit power is still higher than the available maximum power after applying the gain factor the E-DPDCH and the DPCCH are equally scaled

places: tdTfciCoding

: PCCH Paging Control Channel. Valid only on CCS side.

8 8:

9 9:

1010:

1511:

2012:

2513:

3014:

3515: MaxDat = 40

1511:

2012:

2513:

3014:

for this attribute and MO (but are nonetheless allowed to be set).

3515: MaxDat = 40

quivalent of rateMatchingAttrUlTdd: Rate matching attribute in uplink.The remaining elements are not used."}The attribute must have all elements se

Resolution: 100Change takes effect: Re-initiation of Admission Control measurements

csson personnel. Unit: ms ricsson personnel. Unit: ms

ch pattern sequence, the system will not check the range. It is the responsibility of the user (Ericsson personnel) to check the range when configuring t or Inter Frequency measurements are 7, 10, 14.Since the value ranges are different for each pattern sequence, the system will not check the range. It cy measurements ("CpmTransGapPattSeq=4") is 4.Value mapping:Possible value for GSM carrier RSSI Measurement is 8.Possible values for Initial BSIC y measurements ("CpmTransGapPattSeq=4") is 4.Dependencies:It is up to the user (Ericsson personnel) to make sure tGLP1 = tGPL2 for subsequent ch effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.

mTransGapPattSeq=3") is 6.Initial value (set by system) for Inter Frequency measurements ("CpmTransGapPattSeq=4") is 0.Change takes effect: Next co

s case can not be handled by the system. This attribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and is attribute may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restart of frames to be scheduled in a worst case scenario.It must be considered when changing any of the above parameters that the number of frames to b rames to be scheduled in a worst case scenario.It must be considered when changing any of the above parameters that the number of frames to be sch imits on number of frames to be scheduled in a worst case scenario.It must be considered when changing any of the above parameters that the numbe

t on rate of change of 0.1 dB/slot.This attribute may only be changed by Ericsson personnel. Change takes effect: New connectionsFilter: FDD

ld be set to the same value. Unit: kbps (1000 bits per second)Resolution: 32Change takes effect: Ongoing connectionsFilter: FDD

0 bytes)Change takes affect: Next ROP s may never exceed the available recording storage size on the central O&M MP: recordingStorageSize >= ctrFileSize, recordingStorageSize &g

C, it could mean that the best effort type of transport network is congested. This attribute may only be changed by Ericsson personnel. Special values:0

his attribute may only be changed by Ericsson personnel. be changed by Ericsson personnel.

er is defined as mandatory in the MOM. Any of the defined values will work.This attribute may only be changed by Ericsson personnel. Filter: FDD

and scheduled flows or non-scheduled SIP (if exists).3: All multiplexing allowed except between SRB and a non-scheduled SIP (if exists). This attribute e E-DPDCH and the DPCCH are equally scaled to meet the available maximum power. This parameter configures the minimum factor to be used by Rel

3014:

3515: MaxDat = 40

sed."}The attribute must have all elements set.This attribute may only be changed by Ericsson personnel. Special values:-1: not applicable

sonnel) to check the range when configuring the parameter. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, D quence, the system will not check the range. It is the responsibility of the user (Ericsson personnel) to check the range when configuring the parameter. easurement is 8.Possible values for Initial BSIC identification are 3, 4, 8, 12, 24.Possible values for BSIC re-confirmation are 3, 4, 8, 12, 15, 23, 24.Possibl o make sure tGLP1 = tGPL2 for subsequent changes during operation. There is no check in the code for this.Value mapping:Possible value for GSM carr

pPattSeq=4") is 0.Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS.

ge takes effect: At MbmsCch lock/unlock and at system restart

ve parameters that the number of frames to be scheduled on MCCH for RRC messages does not exceed the number of frames that can be scheduled pe arameters that the number of frames to be scheduled on MCCH for RRC messages does not exceed the number of frames that can be scheduled per Re g any of the above parameters that the number of frames to be scheduled on MCCH for RRC messages does not exceed the number of frames that can

es effect: New connectionsFilter: FDD

connectionsFilter: FDD

ize >= ctrFileSize, recordingStorageSize >= uetrFileSizeUnit: kB (1000 bytes)Change takes effect: Next ROP

hanged by Ericsson personnel. Special values:0 defines that CA presence supervision is turned off.Unit: 0.1 sChange takes effect: New connections

hanged by Ericsson personnel. Filter: FDD

a non-scheduled SIP (if exists). This attribute may only be changed by Ericsson personnel. nfigures the minimum factor to be used by Rel-8 UEs for reduction of the E-DPDCH gain factor. The configured value is divided by 15 to obtain the scalin

. Special values:-1: not applicable

he transmission gap pattern sequence in UE, DRNC or RBS. ck the range when configuring the parameter. Change takes effect: Next configuration of the transmission gap pattern sequence in UE, DRNC or RBS. confirmation are 3, 4, 8, 12, 15, 23, 24.Possible values for Inter Frequency measurements are 3, 4, 8, 12, 24, 35.Since the value ranges are different for his.Value mapping:Possible value for GSM carrier RSSI Measurement is 8.Possible values for Initial BSIC identification are 3, 4, 8, 12, 24.Possible values f

he number of frames that can be scheduled per Repetition Period on MCCH.This attribute may only be changed by Ericsson personnel.Change takes ef umber of frames that can be scheduled per Repetition Period on MCCH.This attribute may only be changed by Ericsson personnel.Change takes effect: oes not exceed the number of frames that can be scheduled per Repetition Period on MCCH.This attribute may only be changed by Ericsson personnel.

1 sChange takes effect: New connections

ured value is divided by 15 to obtain the scaling factor used by the UE. -1 means that this attribute is not applicable for this instance.This attribute may

n gap pattern sequence in UE, DRNC or RBS. 24, 35.Since the value ranges are different for each pattern sequence, the system will only check that the value is within the full range defined for the entification are 3, 4, 8, 12, 24.Possible values for BSIC re-confirmation are 3, 4, 8, 12, 15, 23, 24.Possible values for Inter Frequency measurements are

hanged by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restartFilter: FDD ed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restart e may only be changed by Ericsson personnel.Change takes effect: At MbmsCch lock/unlock and at system restart

applicable for this instance.This attribute may only be changed by Ericsson personnel.Unit: 1 / 15 Change takes effect: Immediately

e value is within the full range defined for the parameter. There is no check that a value for a specific sequence is within the values for Inter Frequency measurements are 3, 4, 8, 12, 24, 35.Since the value ranges are different for each pattern sequence, the

e takes effect: Immediately

uence is within the ach pattern sequence, the

RNC Internal System Parameter-TIMERVALUES

Recommend Documents