Versi ersion on 7. 7.00
Process Analyst
September 2007
DISCLAIMER Schneider Electric SA makes no representations or warranties with respect to this manual and, to the maximum extent permitted by law, expressly limits its liability for breach of any warranty that may be implied to the replacement of this manual with another. Further, Schneider Electric SA reserves the right to revise this publication at any time without incurring an obligation to notify any person of the revision. COPYRIGHT © Copyright 2007 Schneider Electric SA. All rights reserved. TRADEMARKS Schneider Schneider Electric Electric SA has made every effort to supply tradem t rademark ark informa informatition on about company company names, names, products and services mentioned in in this this manual. manual. Citect, CitectHMI, and CitectSCADA are registered trademarks of Citect Pty. Ltd. IBM, IBM PC and IBM PC AT are registered trademarks of International Business Machines Corporation. MS-DOS, Windows, Windows NT, Microsoft, and Excel are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. DigiBoard, PC/Xi and Com/Xi are trademarks of Digi International Inc.. Novell, Netware and Netware Lite are are either registered trademarks or trademarks of Novell, Inc. in the United States and other countries.. dBASE is a trademark of dataBased Intelligence, Inc. All other other brands and products products referenced referenced in this document document are acknowledged to be the trademarks trademarks or registered registered trademarks trademarks of their their respective respective holders. GENERAL NOTICE Some product names used in this manual are used for identification purposes only and may be trademarks of their respective companies. September 2007 edition for Vijeo Citect Version 7.0 Manual Revision Version 7.0.
For further information, contact your loc al Schneider Schneider Electric representative.
Contents About this Docume Documentation ntation Par t I
Pr oc oc es s An Anaaly lyss t fo forr Op er ato torr s Ch ap te terr 1
Th e Pr oc oc es s An An aly lyss t: An Ov er vie view w
Ch ap t er 2
Us i n g t h e Mai n To o l b ar
Cha hapt pteer 3
Und ndeers rsta tand ndin ingg Pro roce cess ss An Anaaly lyst st Pens Pens: Pens: An Overview verview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Data Compaction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Data Quality. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Date/Time (Horizontal) Axis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Vertica Verticall (Value (Value)) Axis Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Gridlines ridlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pen Pen Lay Layou outt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Pen Pen Typ Types es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Analog pens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Digital pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Alarm Alarm pens pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cha hapt pteer 4
Int nteera ract ctin ingg wi with th th thee Pro roce cess ss An Anaaly lyst st Pen Pen Sele Selectio ction n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Locking/U Locking/Unlock nlocking ing Pens Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Scrolling Scrolling the Chart hart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Scaling Scaling the Chart hart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Using Using the Navigation Navigation Toolbar Toolbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Specifying Specifying a start time time and and end end time time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 About time spans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Span Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Navigating time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Synchronize to Now. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Toggle Autoscrolling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Zoom ZoomIn/Zoo In/Zoom m Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ii
Contents
Undo Last Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Toggle Box Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Edit Span. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Edit Edit Vertical Vertical Sca Scale le . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Reset eset to Defa Default ult Spa Span n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Using sing Curs Cursors ors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Using Using Curso Cursorr Labels Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Using Using the Right-click Right-click Menu Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Unders Understand tanding ing Mou Mouse se Pointers Pointers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Adding Adding and and Deleting Deleting Pens Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Addin Adding g Pen Pens s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Deleting eleting Pens Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 View Viewing Pen Pen Deta Details ils . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Ch ap t er 5
Us i n g t h e Ob j ec t Vi ew Object bject View View Basics Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Using sing Obje Object ct View View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Ch ap t er 6
Pr i n t i n g an d Ex p o r t i n g About About Proces Process s Analys Analystt Reports Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Configuring Configuring Process Process Analyst Analyst Repo Report rt Options Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Setting Setting up up repo report rt legend legends s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Setting Setting up up repo report rt option options s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Exporting Exporting Pen Pen Data Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Copying data to the Clipboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Copying data to file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Ch ap te terr 7
Co n fi figu gurr in in g th thee Pr oc oc es s A na naly lyss t Using Using the Proces Process s Analyst Analyst Prope Properties rties Dialog Dialog Box Box . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Main page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Toolbars. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Object View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Configuring Configuring Chart-wid Chart-wide e Prope Properties rties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Configuring Configuring general general properties properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Configu onfiguring ring serv server er path paths s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Configuring Configuring Chart Chart Panes Panes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Configu onfiguring ring Pens Pens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Configuring pen appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Configuring pen gridlines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Configuring pen axes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Configuring pen quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Configuring the pen data connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Configuring cursor labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Contents
Configuring Configuring Cursors Cursors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Configu onfiguring ring Defaults efaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Configuring Configuring Toolbars Toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Adding or removing toolbar commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Chang Changing ing the order order of toolbar toolbar com commands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Configuring Configuring the Object View View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Object bject View View prope properties rties pag page e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Working with View Views s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Saving Saving a view view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Loading a view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Ch ap te terr 8
Op er ato atorr Co m m an d Refe ferr en en c e View Com Commands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Zoom Zoom Com Commands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Naviga Navigation tion Com Comm mands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Export Export Com Comm mands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Interface Com Commands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 General eneral Com Comm mands ands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Par t II
Pr oc oc ess An Anaaly lyss t fo fo r Use Userr s Ch ap te terr 9
In te tegg r ati ation on wi with th Vijijeeo Cit iteect Configuri Configuring ng the Process Process Analyst Analyst Control Control from from Graphics Graphics Buil Builder der . . . . . . . . . . . . . . . 65 Tag Tag ass assoc ociation iation.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Security Security and and Perm Permissions issions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Adm Administration inistration privileg privilege e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Command privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Write privilege . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Multi-language ulti-language Suppo Support rt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Understanding the Process Analyst resources . . . . . . . . . . . . . . . . . . . . . . . 67 Using Vijeo Citect to switch the Process Analyst language. . . . . . . . . . . . . . 67 Manually switching languages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Specifying languages for the Web Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Creating Creating your your own own Proces Process s Analyst Analyst resourc resource.dll e.dll.. . . . . . . . . . . . . . . . . . . . . . 68 Persis Persisten tence ce . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Saving Saving while while using the Citect Citect Graphics Graphics Builder Builder.. . . . . . . . . . . . . . . . . . . . . . . 73 Using Using the Save Save View View toolbar toolbar button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Using Using the Save SaveToF ToFile ile automation method ethod . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Saving Saving betwe between en Vijeo Vijeo Citect Citect page transitions transitions (Run-tim (Run-time) e) . . . . . . . . . . . . . . . 74 Resetting back to the default state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Back Backing ing up Projec Projects ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
iii
iv
Contents
Chapter 10
Configuring Process Analyst Design Time Properties Adding New Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Editing Existing CustomCommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Creating or Editing Object View Columns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Process Analyst View Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Chapter 11
Using the Process Analyst Command System Command System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 CustomCommands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 CommandExecuted. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 UpdateCommand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Chapter 12
Automation Model Execution Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Enumerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 IAlarmPen Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 IAlarmPen.LineColor [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 IAlarmPen.LineWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 IAlarmPen.AlarmType [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . 87 IAlarmPen.GetFillColor [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 IAlarmPen.SetFillColor [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 IAlarmPen.GetHatchColor [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 IAlarmPen.SetHatchColor [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 IAlarmPen.GetHatchStyle [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 IAlarmPen.SetHatchStyle [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 IAnalogPen Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 IAnalogPen.LineColor [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . 92 IAnalogPen.LineInterpolation [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . 93 IAnalogPen.LineWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . 94 ICommand Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ICommand.CommandId [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 ICommand.ButtonType [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ICommand.Enabled [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 ICommand.Pressed [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 ICommand.Tooltip [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 ICommand.Privilege [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ICommandSystem Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 ICommandSystem.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ICommandSystem.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 ICommandSystem._NewEnum [Property][Get]. . . . . . . . . . . . . . . . . . . . . . 101
Contents
ICommandSystem.ItemById [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . 101 ICommandSystem.Create [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 ICommandSystem.Execute [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 ICommandSystem.Remove [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 ICursors Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 ICursors.Create [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 ICursors.RemoveAll [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 ICursors.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 ICursors._NewEnum [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 ICursors.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 ICursors.ItemByName [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 IDigitalPen Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 IDigitalPen.FillColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 IDigitalPen.LineColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . 109 IDigitalPen.LineWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . 110 IDigitalPen.Fill [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 IObjectView Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 IObjectView.Visible [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 IObjectView.Height [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 IObjectView.BackgroundColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 113 IObjectView.ForeColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . 114 IObjectView.Columns [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 IObjectView.Items [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 IObjectView.SelectedItem [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . 116 IObjectViewColumn Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 IObjectViewColumn.Name [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . 117 IObjectViewColumn.Text [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . 117 IObjectViewColumn.Width [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . 118 IObjectViewColumns Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 IObjectViewColumns.Add [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 IObjectViewColumns.Hide [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 IObjectViewColumns.Remove [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 IObjectViewColumns.Show[Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 IObjectViewColumns.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . 122 IObjectViewColumns.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . 122 IObjectViewColumns.ItemByName [Property][Get] . . . . . . . . . . . . . . . . . . . 123 IObjectViewColumns._NewEnum [Property][Get] . . . . . . . . . . . . . . . . . . . . 124 IObjectViewItemInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 IObjectViewItem.GetField [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 IObjectViewItem.PutField [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 IObjectViewItem.Expanded [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . 126 IObjectViewItem.Tag [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . 127 IObjectViewItem.Items [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 IObjectViewItems Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 IObjectViewItems.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
v
vi
Contents
IObjectViewItems.Item [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 IObjectViewItems._NewEnum [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . 130 IObjectViewPenItemInterface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 IObjectViewPenItem.BlockColor [Property][Get]. . . . . . . . . . . . . . . . . . . . . 130 IObjectViewPenItem.Checked [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 131 IObjectViewPenItem.Selected [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . 132 IPane Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 IPane.Delete [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 IPane.Height [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 IPane.Collection [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 IPane.Name [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 IPane.BackgroundColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . 136 IPane.FixedHeight [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 IPane.Pens [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 IPanes Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 IPanes.Create [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 IPanes.RemoveAll [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 IPanes.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 IPanes.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 IPanes._NewEnum [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 IPanes.ItemByName [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 IPen Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 IPen.AddSample . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 IPen.Clear [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 IPen.Delete [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144 IPen.GetDefaultSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 IPen.GetHorizontalAxisTimeSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . 146 IPen.GetInformation [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 IPen.GetStatistic [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 IPen.GetVerticalAxisSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 IPen.GoToNow [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 IPen.HorizontalScrollBy [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 IPen.HorizontalZoom [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151 IPen.PointsVisible [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 IPen.PutHorizontalAxisTimeSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . 153 IPen.PutVerticalAxisSpan [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 IPen.RefreshData [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 IPen.ResetToDefaultSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 IPen.Select [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 IPen.SetDefaultSpan [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 IPen.SetQualityCompactionPointType [Method]. . . . . . . . . . . . . . . . . . . . . 158 IPen.SetQualityLineStyle [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 IPen.SetVerticalAxisLabelValue [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . 159 IPen.VerticalScrollBy [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 IPen.VerticalZoom [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Contents
IPen.AxisBackgroundColor [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . 162 IPen.BlockRepaint [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162 IPen.Collection [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 IPen.DataPoint [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 IPen.DataServer [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164 IPen.Height [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 IPen.HorizontalAxisColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . 166 IPen.HorizontalAxisResize [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . 167 IPen.HorizontalAxisScroll [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . 168 IPen.HorizontalAxisWidth [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . 168 IPen.HorizontalGridlinesColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 169 IPen.HorizontalGridlinesStyle [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . 170 IPen.HorizontalGridlinesWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 171 IPen.HorizontalMinorGridlinesColor [Property][Get/Set] . . . . . . . . . . . . . . . 171 IPen.HorizontalMinorGridlinesStyle [Property][Get/Set] . . . . . . . . . . . . . . . 172 IPen.IsDeleted [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 IPen.IsSelected [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173 IPen.LocalTime [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174 IPen.Name [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 IPen.RequestMode [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 175 IPen.Stacked [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 IPen.TrendCursorLabelFillColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . 177 IPen.TrendCursorLabelLineColor [Property][Get/Set]. . . . . . . . . . . . . . . . . 178 IPen.TrendCursorLabelTextColor [Property][Get/Set]. . . . . . . . . . . . . . . . . 178 IPen.VerticalAxisAutoscale [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . 179 IPen.VerticalAxisColor [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . 180 IPen.VerticalAxisLabelType [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . 181 IPen.VerticalAxisResize [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . 181 IPen.VerticalAxisScroll [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . 182 IPen.VerticalAxisWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . 183 IPen.VerticalGridlinesColor [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . 184 IPen.VerticalGridlinesStyle [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . 185 IPen.VerticalGridlinesWidth [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . 185 IPen.VerticalMinorGridlinesColor [Property][Get/Set] . . . . . . . . . . . . . . . . . 186 IPen.VerticalMinorGridlinesStyle [Property][Get/Set] . . . . . . . . . . . . . . . . . 187 IPen.Visible [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 IPens Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188 IPens.Create [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189 IPens.RemoveAll [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 IPens.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 IPens.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 IPens._NewEnum [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 IPens.ItemByName [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191 IPens.Pane[Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192 IProcessAnalyst Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193
vii
viii
Contents
IProcessAnalyst.BlockUpdates [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . 194 IProcessAnalyst.UnBlockUpdates [Method] . . . . . . . . . . . . . . . . . . . . . . . . 194 IProcessAnalyst.CopyToClipboard [Method]. . . . . . . . . . . . . . . . . . . . . . . . 195 IProcessAnalyst.CopyToFile [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 IProcessAnalyst.FreezeEvent [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . 196 IProcessAnalyst.LoadFromFile [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . 197 IProcessAnalyst.PrintAll [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198 IProcessAnalyst.SaveToFile [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199 IProcessAnalyst.ShowProperties [Method] . . . . . . . . . . . . . . . . . . . . . . . . . 200 IProcessAnalyst.SubscribeForPropertyChange [Method]. . . . . . . . . . . . . . 200 IProcessAnalyst.SynchroniseToNow [Method] . . . . . . . . . . . . . . . . . . . . . . 201 IProcessAnalyst.UnsubscribePropertyChange [Method]. . . . . . . . . . . . . . . 202 IProcessAnalyst.AdminPrivilegeLevel [Property] [Get] . . . . . . . . . . . . . . . . 203 IProcessAnalyst.AutoScroll [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . 204 IProcessAnalyst.BackgroundColor [Property][Get/Set]. . . . . . . . . . . . . . . . 204 IProcessAnalyst.CommandSystem [Property][Get]. . . . . . . . . . . . . . . . . . . 205 IProcessAnalyst.ContextMenu [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 206 IProcessAnalyst.Cursors [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . 207 IProcessAnalyst.DataRequestRate [Property][Get/Set] . . . . . . . . . . . . . . . 207 IProcessAnalyst.DisplayRefreshRate [Property][Get/Set]. . . . . . . . . . . . . . 208 IProcessAnalyst.Language [Property] [Get/Set] . . . . . . . . . . . . . . . . . . . . . 209 IProcessAnalyst.LastSelectedPen [Property][Get] . . . . . . . . . . . . . . . . . . . 210 IProcessAnalyst.LockedPens [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . 211 IProcessAnalyst.ObjectView [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . 212 IProcessAnalyst.NumberofSamples[Property][Get/Set] . . . . . . . . . . . . . . . 212 IProcessAnalyst.Panes [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 213 IProcessAnalyst.PrimaryPath [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . 214 IProcessAnalyst.SecondaryPath [Property][Get/Set] . . . . . . . . . . . . . . . . . 215 IProcessAnalyst.Toolbars [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . 216 IProcessAnalyst.WritePrivilegeLevel [Property][Get]. . . . . . . . . . . . . . . . . . 216 IProcessAnalyst.ZoomMode [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . 217 MouseDoubleClick [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 MouseClick [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218 PenCreated [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219 PenDeleted [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 PenRenamed [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 PenSelectionChanged [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 HorizontalAxisChanged [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221 VerticalAxisChanged [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 222 CursorMoved [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 Error [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223 PropertyChanged [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224 OVItemAdded [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 OVItemRemoved [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225 OVItemSelected [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
Contents
OVItemChecked [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226 OVColumnAdded [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 OVColumnRemoved [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227 CommandExecuted [Event]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228 UpdateCommand [Event] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 AlarmType [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229 AxisLabelType [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230 LineStyle [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 HatchStyle [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231 PenNameMode [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 PenType [Enumeration]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 PointType [Enumeration]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232 RequestMode [Enumeration]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 ToolbarButtonType [Enumeration]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 LineType [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233 ErrorNotifyCode [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 QualityType [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234 QualityCompactionType [Enumeration]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 FileLocation [Enumeration] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 IToolbar Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235 IToolbar.Visible [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 IToolbar.Buttons [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236 IToolbars Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 IToolbars.Count [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237 IToolbars.Item [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 IToolbars._NewEnum [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238 IToolbarButton Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239 IToolbarButton.CommandId [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . 239 IToolbarButtons Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 IToolbarButtons.Add [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 IToolbarButtons.Remove [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 IToolbarButtons.RemoveAll [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241 IToolbarButtons.Count [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 IToolbarButtons.Item [Property][Get]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242 IToolbarButtons._NewEnum [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . 243 ITrendCursor Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243 ITrendCursor.GetValue [Method] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 ITrendCursor.Delete [Method]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 ITrendCursor.Color [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 245 ITrendCursor.Width [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . 246 ITrendCursor.Position [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . 247 ITrendCursor.Visible [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . . . . . . . . 247 ITrendCursor.Collection [Property][Get] . . . . . . . . . . . . . . . . . . . . . . . . . . . 248 ITrendCursor.Name [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . . . . . 249 ITrendCursor.PenLabelVisible [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 250
ix
x
Contents
ITrendCursor.PenLabelWidth [Property][Get/Set]. . . . . . . . . . . . . . . . . . . . 251 ITrendCursor.PenLabelHeight [Property][Get/Set] . . . . . . . . . . . . . . . . . . . 251 ITrendCursor.PenLabelX [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . 252 ITrendCursor.PenLabelY [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . . . 253 ITrendCursor.LabelsLocked [Property][Get/Set] . . . . . . . . . . . . . . . . . . . . . 254
Chapter 13
Cicode Programming Reference Automation Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Handling an Event. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255 Enumerating collections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256 Implementing a custom command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257 Implementing a custom column. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 259
Index
265
About this Documentation The information presented here is intended for two types of user, Operators and Users:
Operator - a person who uses the Process Analyst in a runtime environment to monitor plant operations. An Operator might configure the properties of various Process Analyst components during runtime to facilitate their work. An Operator is not expected to possess in-depth technical knowledge about the Process Analyst components. For details about using the Process Analyst as an Operator, see “Process Analyst for Operators”.
User - a person who uses the Process Analyst during design time to engineer a view for an Operator. A User possesses in-depth technical knowledge about Vijeo Citect and Cicode, and understands how these components interact. For details about using the Process Analyst as a User, see “Process Analyst for Users”.
2
Part 1 Process Analyst for Operators
This section contains information for Operators and describes the following: “The Process Analyst: An Overview” “Using the Main Toolbar” “Understanding Process Analyst Pens” “Interacting with the Process Analyst” “Using the Object View” “Printing and Exporting” “Configuring the Process Analyst” “Operator Command Reference”
Chapter 1: The Process Analyst: An Overview The Process Analyst control allows Operators to view trend and/or alarm tag data (both real-time and historical) for comparison and analysis during run time through their existing Vijeo Citect server architecture. Users can configure certain properties of the Process Analyst control during design time. A typical Process Analyst view might look like the one shown here. Your Process Analyst views will probably look different to this example. 5
7
8
1
2
3
6 9 10
The Process Analyst control interface typically consists of the following components: 1
Main toolbar: Contains commands for performing general operations in the Process Analyst, such as opening views, printing reports, and so on. You can configure this toolbar to contain different items.
2
Pens: A Process Analyst pen represents your trend and/or alarm data. The Process Analyst supports three types of pen: analog pen , digital pen , and alarm pen. Each pen has its own graphical representation. You can configure most pen properties during run time.
3
Panes: Panes are used to group pens visually in the Process Analyst and are stacked vertically on the Process Analyst display. Every pen belongs to a single pane. You can configure chart panes.
4
Chart background (not shown): The panes are drawn over the chart background. Depending on the layout of the pens, the background may be partially visible. You can configure the chart background.
2
5
Date/time axis: Located at the top of a pane, the date/time (horizontal) axis displays the date or time (or both) of the data for the primary selected pen within a pane. You can configure the axis.
6
Vertical axis: Analog pens have a vertical axis on the left-hand side of the pane to indicate data values. You can configure this axis.
7
Cursor: A cursor allows an Operator to determine value at a given point in time by dragging the cursor line to the point required. You can configure the cursor.
8
Cursor labels: Display the value where the cursor intersects the trend value line.
9
Navigation toolbar: Contains commands to allow an Operator to travel forward or backward through trends, as well as other navigation-related tasks. You can configure this toolbar to contain different items.
10 Object View: When displayed, the Object View appears under the
navigation toolbar and displays information about your Process Analyst pens, such as name, color, scale, and so on. You can configure the Object View.
Chapter 2: Using the Main Toolbar The Process Analyst main toolbar is located above the top pane. The main toolbar contains commands that allow you to perform general operations, such as save and load Process Analyst views , print trend reports, add or remove pens, display or hide cursors and labels, and so on. Toolbar commands can be customized; for details, see “Configuring Toolbars”. The table below describes the items that are included on the main toolbar by default. Item
Description Load View. Loads a saved view from file. For details, see “Loading a view”. Save View. Saves a view to file. For details, see “Saving a view”. Print. Displays the standard Windows Print dialog box for printing trend reports. For details, see“Printing and Exporting”. Copy to Clipboard . Copies visible pens to the Windows Clipboard. For details, see “Copying data to the Clipboard”. Export to File. Exports visible pens to an Excel-compatible file. For details, see“Copying data to file”. Add Pen . Displays the Add New Pen(s) dialog box for adding a pen. For details, see “Adding Pens”. Remove Pen. Deletes the currently selected pen from the trend display. For details, see “Deleting Pens”. Lock/Unlock Pens. Toggles the locking of pens. For details, see“Locking/Unlocking Pens”. Show/Hide Points . Toggles the display of points representing where sample data was recorded in the archive. For details, see“Pens: An Overview”. Show/Hide Cursors . Toggles the display of cursors. For details, see “Using Cursors”. Show/Hide Cursor Labels . Toggles the display of cursor labels. For details, see“Using Cursor Labels”. Toggle Obj ect View. Toggles the display of the Object View. For details, see“Using the Object View”. Properties . Displays the Properties dialog box for configuring the Process Analyst control. For details, see“Configuring the Process Analyst”. Help. Displays the Process Analyst online Help.
See Also
“Using the Navigation Toolbar” | “Operator Command Reference”
4
Chapter 3: Understanding Process Analyst Pens The Process Analyst pens allow you to analyze and compare both real-time and historical data from trend and alarm servers. See Also
“Pens: An Overview” | “Pen Types”
Pens: A n Overview Process Analyst pens are drawn against time. Each pen has its own colored line (and can contain other graphical elements). Sample markers (or points) are drawn on the line to indicate where data was recorded in the archive. The style of the line indicates the quality of the data; the style of the sample marker indicates the compaction of the sample.
Data Compaction
Data compaction is the visual grouping of multiple data points into a single data point when the data in the archive is too dense to be displayed as individual data points for the selected time span.
Data is compacted by grouping raw samples together to form a multiple sample. Sample compaction is indicated on the graph by using different sample markers. For example, in the illustration below, the two sample markers that appear as squares actually represent multiple raw samples. However, because the data points in this view are too dense to display as individual points, the multiple samples appear as one data point.
The following illustration zooms in on the second multiple sample, and shows that what appeared to be a single raw sample actually consists of several raw samples:
The Process Analyst uses the following default point styles for single and multiple samples: Sample compaction
Point type
Single
Ellipse
Multiple
Rectangle
Interpolated
Triangle (see“Interpolated samples”).
6
Interpolated samples
Normally samples are only single or multiple. But there is a specific situation in which an interpolated sample is used to correct a graph that only occurs with event trends. The frequency of the data stored in an event trend can vary dramatically; for example, where several samples are within one display period, followed by no samples for a long time. A multiple sample will be drawn with a value calculated from the samples within the period. But the value after that period will be whatever the last sample in the period was. So an interpolated sample is added at the start of the next display period to correct the graph. See Also
“Interpolation” Request modes
Because the Process Analyst Control makes requests for a range of data using a display period, Vijeo Citect needs to perform calculations on data if it becomes too dense in order to calculate the value of a multiple sample. The Process Analyst provides the following options for this calculation:
Data Quality
Average - The value will be an average of all the individual samples within the multiple sample, as will the timestamp. This is the default calculation method.
Maximum: The value will be the maximum value out of all the individual samples within the multiple sample. The timestamp will be that of the individual sample that was the maximum. The timestamp will be the average of all the individual samples within the multiple sample.
Minimum: The value will be the minimum value out of all the individual samples within the multiple sample. The timestamp will be that of the individual sample that was the minimum. The timestamp will be the average of all the individual samples within the multiple sample.
Newest: The value will the latest arrived value out of all the individual samples within the multiple sample. The timestamp will be that of the individual sample that was the newest. The timestamp will be the average of all the individual samples within the multiple sample.
Process Analyst pens use the same quality system as Vijeo Citect trend and alarm data. There are four data quality states:
Good - Samples were recorded in the trend archive as good.
NA - When Vijeo Citect is unable to obtain a sample or the data retrieved was invalid, an N/A sample will be recorded in the trend archive.
Gated/Disabled - For trends, when the trigger of a trend is off, a value of "Gated" is recorded in the trend archive. For alarms, this data quality state indicates that the alarm has been disabled.
The Process Analyst uses the following default line styles to indicate data quality: Quality
Line style
Good
Solid
7
Quality
Line style
NA
None
Gated
Dot
Consider the following examples: Data sample
Description This example shows several single samples. The third sample has a quality of N/A, indicated by the break in the trend line.
Here the quality of the third sample is gated, indicated by the broken line connecting these samples.
With multiple samples, the quality of the last sample in the group determines how the line is drawn. Consider the following examples: This example shows that the third sample is actually a multiple sample. The quality of the third (multiple) sample and the next sample is N/A, again indicated by the break in the trend line. Here the quality of the third multiple sample is gated, again indicated by the broken line connecting the samples.
The line style indicating the data quality is configurable during run time and design time; for details, see “Configuring pen quality”.
Date/Time (Horizontal) Axis
All Process Analyst pens have a date/time axis, located at the top of the pane.
The date/time axis displays time using the current locale format specified in your computer date/time settings. If the millisecond component is required, it is appended to the end in the format “< xxx>ms.” Since the local time zone is determined from the current computer settings, these settings must be configured accurately. The date/time axis can also display data using the universal time coordinate (UTC) format. You can switch between local or UTC time as you like (see “Configuring pen axes”). If the current time is 10.00p.m. UTC, in the Sydney (GMT+10) time-zone, local time will be 8.00p.m. The date/time axis is divided into major and minor time intervals, which change dynamically depending upon the time span. In the illustration above, the major intervals are 1 minute apart, and the minor are 5 seconds apart. Note the following:
When the axis time span is 1 minute or less, the format of the axis labels includes milliseconds and the date is removed.
When the axis time span is 1 week or above, the time is removed and only the date is displayed.
8
By default, the date/time axis displays a time span of 10 minutes; the major intervals represent 5 minutes, and the minor intervals 30 seconds. Daylight savings (local time)
The date/time axis can also accommodate daylight savings transitions. For example, when entering daylight savings, the axis will indicate the transition as 11a.m., 12a.m., 1a.m., 3a.m., 4a.m., 5a.m., if this transition occurred at 2a.m. Likewise, in the out transition, when 1 hour is removed from daylight savings time, the axis will display 11a.m., 12a.m., 1a.m., 2a.m., 2a.m., 3a.m., 4a.m., 5a.m. Now indicator
The Now indicator is a small white circle on the date/time axis that indicates the current computer time based on the computer’s time settings.
The position of the Now indicator is refreshed according to the value specified in the Display Refresh Date text box in the Process Analyst Control Properties dialog box. Note: If you have used the Vijeo Citect trend page feature, note the following: In Vijeo Citect the right-hand side of the screen always represents Now (when looking at real-time data). In the Process Analyst control, “Now” is represented only by the Now indicator, which may be located anywhere on the trend display, even off screen, since it is possible to scroll into the future, or back into the past. You can scroll and scale the date/time time axis to interact with your Process Analyst pens; for details, see “Interacting with the Process Analyst”. You can also configure the date/time axis to suit your preferences; for details, see “Configuring pen axes”.
Vertical (Value) Axis
The vertical (value) axis is located at the left-hand edge of the pane. Like the date/time axis, the value axis consists of major and minor intervals, but they represent value intervals rather than date and time. The intervals are calculated automatically by the Process Analyst. The value axis is shown only for analog pens; the axis displayed reflects the values for the primary selected pen. By default the vertical axis will use the engineering scale from the tag of the selected pen. The vertical axis also supports autoscaling. When autoscaling is enabled, the vertical axis automatically adjusts its limits to accommodate new samples as they are added to each individual pen.
9
In this example, there are two panes, each of which has a differently scaled vertical axis. You can scroll and scale the vertical axis; for details, see “Scrolling the Chart” and “Scaling the Chart”. You can also configure the appearance of the vertical axis; for details, see “Configuring pen axes”.
Gridlines
The Process Analyst pens use gridlines as a visual guide to help an Operator determine the value of trends. Major gridlines are solid lines; minor gridlines are broken lines. Analog pens have vertical and horizontal gridlines; alarm and digital pens only have vertical gridlines. The display of gridlines changes dynamically according to the selected time span. You can configure vertical gridlines at run time for all pen types; you can configure horizontal gridlines for analog pens. For details, see “Configuring pen gridlines”.
Pen Layout
You can are display pens in the Process Analyst by stacking or overlaying.
In stacked mode, a user-specified amount of vertical real-estate is allocated to the pen, and with this, stacked pens are laid out under each other on the pane, starting from the top of the pane under the date/time axis, like this:
Here, three pens (one analog and two digital) are stacked under each other. Stacking applies to all types of pens.
In unstacked mode, pens are drawn on top of each other. The order in which the pens were added to the pane governs the drawing order: the last
10
pen added is the topmost pen drawn. When a pen is selected, it is brought to the front of any other pens displayed
Here, two analog pens are overlaid. You can also overlay digital and alarm pens. You can have any mix of stacked and unstacked pens on a pane.
Pen Types The Process Analyst control supports three types of pen: analog pens , digital pens , and alarm pens. Analog and digital pens are associated with trend tags; alarm pens are associated with alarm tags.
Analog pens
The Process Analyst control typically uses analog pens to represent nonbinary data. Only analog pens have a value (vertical) axis, which the data is plotted against, as shown here:
Interpolation
Analog pens have two types of interpolation that allow you to specify how to connect data samples on a trend line: straight and stepped:
Straight - a line is drawn directly between the points like this:
Stepped - the lines drawn always maintain the value of the previous sample until a sample with a different value arrives, in which case a vertical line is drawn:
11
The Process Analyst allows analog pens to be configured at run time and design time. For details, see “Configuring Pens”. See Also
Digital pens
“Interpolated samples” The Process Analyst control typically uses digital pens to represent binary data. Values on the pen are clamped to a range of 0 to 1. Any value equal to or greater than 0.5 is clamped to 1; all other values are clamped to 0. A fill color is used to indicate where the data is 1, as shown here:
By default, the layout of digital pens is stacked. For details, see “Pen Layout”. The Process Analyst allows the appearance of digital pens to be configured during run time and design time. You can configure the trend line color, width, and fill color. For details, see “Configuring pen appearance”.
Alarm pens
The Process Analyst uses alarm pens to graphically display the history of a Vijeo Citect alarm over time. The Process Analyst supports seven different types of alarm pens. The alarm’s on/off transition state changes and acknowledgements are all represented graphically in the alarm pen display. To achieve this, the alarm pen consists of three elements: the alarm state , on/off , and acknowledgement. The diagram below illustrates how an alarm pen displays the information of an alarm tag: 1 3 on/off 2
4
1
The alarm is turned on in its initial state and is unacknowledged.
2
The alarm changes to a different state, but is still unacknowledged.
3
The alarm is acknowledged.
4
The alarm is turned off.
12
Like other types of pen, alarm pens can represent variations in data quality and data compaction. The Process Analyst allows alarm pens to be configured at run time and design time. For details, see “Configuring alarm pens”. On/off
When an alarm is off, the alarm pen will draw the line low. When the alarm transitions to on, the line is drawn high. Alarm states
When an alarm transitions to on, it enters a particular state. The states of an alarm are dictated by the type of Vijeo Citect alarm tag. The Process Analyst supports all Vijeo Citect standard alarm types. Note: For multi-digital alarms, the state descriptions are retrieved from the Vijeo Citect alarm record. The Process Analyst uses a different color, shading style, and description to represent each alarm state; these properties are configurable. For details, see “Configuring alarm pens”. Alarm acknowledgment
Process Analyst alarm pens can represent when alarms are acknowledged.
The Process Analyst indicates the period for which the alarm has been left unacknowledged by drawing a line above the trend line. A new unacknowledged period begins whenever the alarm transitions to an on state. unacknowledged periods
acknowledgements
The unacknowledged period ends when an Operator acknowledges an alarm. The Process Analyst identifies this by placing a sample marker to indicate the exact time the alarm was acknowledged, and by drawing an unacknowledged line down to that sample marker, as shown here:
acknowledgement marker
13
Alarm types
The Process Analyst uses the following types of alarm pen: Alarm type
Alarm pen representation
Digital
Analog
Advanced
Argyle Analog
Multi-digital
Timestamped
Timestamped analog
Timestamped digital
For multiple samples in an alarm, the alarm state value is the last recorded value in the group.
14
Chapter 4: Interacting with the Process Analyst This section discusses how to interact with the Process Analyst. See Also
“Pen Selection” “Locking/Unlocking Pens” “Scrolling the Chart” “Scaling the Chart” “Using the Navigation Toolbar” “Using Cursors” “Using Cursor Labels” “Using the Right-click Menu” “Understanding Mouse Pointers” “Adding and Deleting Pens” “Viewing Pen Details”
Pen Selection Each pane on the Process Analyst can have one selected pen. The axes that are displayed on a pane are that of the selected pen. The last pen selected across all panes is referred to as the primary selected pen. You can select a Process Analyst pen in several ways:
By clicking on the pen’s graphical elements (i.e., the pen line).
If the pens are stacked, by clicking the background under the pen line.
By selecting the pen in the Object View.
The selection of a pen is indicated by a subtle halo effect surrounding the pen line. In the example shown here, the top (green) pen is selected, indicated by the halo surrounding the pen:
16
Note that the halo does not appear if there is only one pen on the pane. Selecting a pen on a pane also causes the same pen to be highlighted in the Object View. Selecting a pen causes that pen to be drawn in front of other pens on the pane.
Locking/Unlocking Pens By default, the Process Analyst locks together the time span and position in time (horizontal axis) of all pens. However, you can unlock the pens, allowing the pens to be displayed across different positions in time and/or time spans. For example, you could unlock pens to compare a previous month’s data for a tag with the data for this month. You would do this by adding two pens to a pane that represent the same tag, then unlocking the pens, and adjusting the time positions for each pen as required. To control pen locking and unlocking, you use the Lock/Unlock Pens button on the main toolbar.
This option is also available on the right-click (context) menu. Locking and unlocking has the following behavior:
When pens are locked, all time-related operations are applied to all pens.
When pens are unlocked, all time-related operations are applied to the primary selected pen.
Synchronization applies to all pens regardless of their being locked or unlocked.
When transitioning from locked to unlocked, the time span and position in time of all pens are synchronized to match that of the primary selected pen.
Scrolling the Chart The Process Analyst allows you to scroll through data in both the horizontal and vertical directions by dragging the mouse or spinning the mouse wheel. To scroll by dragging: 1
Click and hold down the left mouse button on the pen (or background) that you want to scroll.
2
Drag the mouse in the direction you want to scroll:
3
Horizontal axis: drag right to move backward in time, drag left to move forward.
Vertical axis: drag up to scroll down the axis, drag down to scroll up the axis.
Release the left mouse button to complete the scrolling.
To scroll by using the mouse wheel: 1
Click the pen or background that you want to scroll.
2
Spin the mouse wheel in the direction you want to scroll:
17
Horizontal axis: spin up to move backward, spin down to move forward.
Vertical axis: spin up to scroll up the axis, spin down to scroll down.
You can disable scrolling in the horizontal direction, the vertical direction, or both by using the Property dialog box or the right-click (context) menu; see “Configuring pen axes” and “Using the Right-click Menu” for details. The Process Analyst indicates whether scrolling is enabled or disabled by displaying a different-shaped mouse pointer; for details, see “Understanding Mouse Pointers”.
Scaling the Chart The Process Analyst allows you to change the scale of the data in both the horizontal and vertical direction by dragging the mouse or spinning the mouse wheel. To scale the data by dragging: 1
Click and hold down the left mouse button on the axis that you want to scale.
2
Drag the mouse in the direction you want to scale:
3
Horizontal axis: drag left to expand the scale, drag right to shrink.
Vertical axis: drag up to expand the scale, drag down to shrink.
Release the left mouse button to complete the scaling.
To scale by using the mouse wheel: 1
Click the axis that you want to scale.
2
Spin the mouse wheel in the direction you want to scale:
Horizontal axis: spin up to shrink the axis, spin down to expand.
Vertical axis: spin up to expand the axis, spin down to shrink.
You can disable scrolling in the horizontal direction, the vertical direction, or both by using the Property dialog box or the right-click (context) menu; see “Configuring pen axes” and “Using the Right-click Menu” for details. The Process Analyst indicates whether scaling is enabled or disabled by displaying a different-shaped mouse pointer; for details, see “Understanding Mouse Pointers”.
Using t he Navigation Toolbar Using the navigation toolbar you can:
Specify a start time and end time.
Select predefined time spans.
Lock time spans on the display.
Navigate backward or forward through your data.
Synchronize all pens to “Now.”
18
Specifying a start time and end time
Toggle autoscrolling of the display.
Zoom in on or out of data.
Undo the last zoom operation.
Toggle between Zoom mode and normal mode.
Set nonstandard time spans.
Edit the vertical (value) scale.
You can specify a start time and an end time for the trend display by using the date/time pickers. The start time picker is located on the left-hand side of the navigation toolbar, the end time picker on the right.
The date/time picker formats the date and time using the settings obtained from your computer for the currently logged in user. The date/time picker displays time in 24-hour format (dd/mm/ yyyy hh mm:ss nnn) where:
dd represents days
mm represents months
yyyy represents years
hh represents hours
mm represents minutes
ss represents seconds
nnn represents milliseconds (added automatically to the time)
To change the date or time in the date/time picker: 1
Click the element of the date or time you want to change in the start time picker or the end time picker.
2
Do either of the following:
Type in a time explicitly.
Press the Up arrow key or Down arrow key to increment or decrement the value respectively.
Note: You can use the Left arrow and Right arrow keys to move between time elements. Working with Daylight Savings
To indicate whether the time in the time picker control is Standard time or Daylight Savings time, the clock to the left of the control has a shaded segment if the time is in a Daylight Savings period. When in Standard time, the clock does not have a shaded segment. For example, this icon appears when the time picker’s value is within the local Daylight Savings period:
19
This icon appears when the time picker’s value is within the local Standard time period:
If the Daylight Savings transition involves duplicate hours, you can use the spin controls (or Up and Down arrow keys) to select the hour you want. Note: In order for the Process Analyst to be able to indicate that Daylight Savings is in effect, the Automatically adjust clock for daylight saving changes option on the Date and Time Properties dialog box must be enabled, as indicated below:
See Also
“Daylight savings (local time)” Shifting and fitting time units
You can manipulate the start time and end time by using special keyboard shortcuts. Using these shortcuts, you can do the following:
Shift by unit
Fit to unit
Shift by unit Shifting date or time by unit allows you to change the opposite date/
time element to the one selected by the corresponding date or time component. For example, if you shift by unit the month time element in the start time, the month time element in the end time increments by one month exactly, including days, minutes, and seconds. This also works for months that have different end days. To shift by unit: 1
Press and hold down the Shift key.
20
2
Click a date or time element in the date/time picker. The opposite time picker changes by the base time amount of the selected time element.
Fit to unit Fitting date or time to unit allows you to synchronize the selected time
element to the zero position of that time element in the start time and end time. For example, an Operator clicks on the hh time element of the Start picker, which shows 19:30:05.123. After Ctrl + click , the Start hour time element shows 19:00:00.000, and the End time element shows 20:00:00.000. Now the time span represents exactly one hour, synchronized on the hour. To fit to unit:
About time spans
See Also
Span Lock
1
Press and hold the Ctrl key.
2
Click a date or time element in the date/time picker. Both the start time and end time element are synchronized to zero based on the date/time element selected.
The time span of the trend display is the difference between the start time and the end time. The start time appears on the left-hand side of the trend display, the end time on the right. The Span Picker (shown below) indicates the current span being used; it also contains commonly used predefined time spans. Selecting a time span adjusts the start time, leaving the end time as-is.
“Span Lock” When the time span is locked and the start time and/or end time picker changed, the current time span is maintained. If the time span is unlocked, the time span is not maintained when any of the time pickers are changed.
By default, the span is locked. You can toggle span locking on or off by using the Span Lock button. See Also
Navigating tim e
“About time spans” The navigation controls allow an Operator to navigate backwards or forwards through time. The amount of time moved depends upon the time currently selected in the Span Picker. For example, if 10 minutes is selected in the Span Picker and Back One Span is clicked, the display moves back 10 minutes into the pen’s history. The following navigation controls are available: Navigation control Description Back One Span - moves back one time span. Back Half a Span - moves back half a time span. Forward Half a Span - moves forward half a time span.
21
Navigation control Description Forward One Span - moves forward one time span.
Synchronize to Now
The Synchronize to Now command synchronizes all pens such that the date/ time reflects “Now,” which is positioned on the right-hand edge of the screen. “Now” is calculated using the current system time.
The Synchronize to Command is also available from the right-click (context) menu. See Also
Toggle Autoscr olling
“Now indicator” When Autoscroll is turned on, as time passes the position in time of all pens moves by the same amount to keep pace; by default, the display is updated every second. The refresh rate of the display can be controlled by using the Display Refresh Rate property. When Autoscroll is turned off, as time passes the position in time of all pens remain fixed. By default, Autoscroll is on. You can toggle Autoscrolling on or off by using the Toggle Autoscrolling button.
Using the navigation controls, including the Time Span picker, causes Autoscrolling to be turned off The Autoscroll command is also available from the right-click (context) menu.
Zoom In/Zoom Out
Use the Zoom In 50% and Zoom Out 50% commands like this: Command
Icon
Description
Zoom In 50%
Zooms in on the displayed data, halving the span of both axes.
ZoomOut 50%
Zooms out of the displayed data, doubling the span of both axes.
Note: The midpoint of each axis is maintained during these zoom operations.
Undo Last Zoom
Undo Last Zoom allows you to undo the last zoom operation, returning the display to the previous state.
Toggl e Box Zoom
The Toggle Box Zoom button switches between Box Zoom mode and normal interaction mode. In Box Zoom mode, you can define an area of the chart to zoom in on for more detail. To use Box Zoom: 1
Select the pen to zoom in on.
22
2
Click Toggle Box Zoom on the navigation toolbar.
The cursor changes to a cross. 3
Click and drag the bounding box to enclose the part of the data you want to zoom in on, as shown below.
4
Release the mouse button. The display changes to a close-up of the selected data.
5
To exit Zoom mode, click the Toggle Box Zoom button.
Depending on whether the pens are locked or unlocked, the Toggle Box Zoom commands works differently:
For locked pens, the zoom is applied to all pens in the horizontal date/time axes. If an analog pen is being zoomed, the zoom is applied to the vertical (value) axis of all non-autoscaled analog pens in the pane in which the zoom box was initiated.
For unlocked pens, the zoom is applied only to the selected pen in both the date/time and vertical (value) axes. The value axis is only affected if autoscale is off.
Note: Vertical zoom is only applied to analog pens, since it has no effect with alarm or digital pens.
Edit Span
Click the Edit Span button to display the Edit Span dialog box, which allows you to set non-standard time spans.
To edit a time span: 1
Click Edit Span on the navigation toolbar. The Edit Span dialog box appears.
23
The fields provided are: w = weeks, d = days, hr = hours, min = minutes, sec = seconds, and ms = milliseconds.
Edit Vertical Scale
2
Enter a New span. Click the element of the time span that you want to change, then either type in a new value, or use the Up arrow or Down arrow to specify a new value. You can use the Right arrow and the Left arrow key to move between the time elements.
3
Click OK. The new time span is applied.
The Process Analyst allows Operators to edit the vertical scale of a se lected analog pen to display more appropriate values, if required. The vertical scale for digital or alarm pens cannot be edited. To edit the vertical scale:
Reset to Default Span
1
Click Edit Vertical Scale on the navigation toolbar. The Edit Vertical Scale dialog box appears.
2
Click the Limits or Engineering Scale option. The Limits values displayed are the current values used by the vertical scale. The Engineeri ng Scale values are obtained from the trend tag.
3
Enter a new Minimum value and Maximum value, and then click OK.
Use the Reset to Default Span button to reset the time span to the default time span of the primary selected pen. The default span can be configured by using the Property dialog box. For details, see “Configuring pen axes”.
24
See Also
“Configuring Defaults” | “Pen Selection”
Using Cursors A cursor enables an Operator to determine the value of a pen at a given point in time by dragging the cursor to the specific point on the pen line. A cursor label is used to display the value. An Operator can define many of the properties of cursors and cursor labels. For details, see “Configuring Cursors”.
In this example the cursor intersects three pens; the cursor labels (the yellow rectangles) display the corresponding pen values. To move a cursor, drag the cursor line left or right. As the cursor moves, the cursor labels move with the cursor and are updated continuously, reflecting the position of the cursor. Note: The cursor extends across all configured panes. A line connects the cursor label to the associated pen line. The line has three main states: State
Style
Intersection within pen data
Line
Intersection before or after pen data
Line with indicator
Example
25
State
Style
No intersection and no data
Invisible line
Example
To show/hide a cursor:
Click Show/Hide Cursor on the main toolbar. You can display additional cursors by using the Properties dialog box.
You can display as many cursors as you want. To add a cursor, right-click the root item (Process Analyst View) in the property tree in the Properties dialog box, and choose Add Cursor.
Using Cursor Labels Each cursor has one cursor label for each pen displayed. The cursor label displays the value of the pen at the point where the cursor intersects with the pen data. To display cursor labels:
Click Show/Hide Cursor Labels on the main toolbar.
This table summarizes how to use cursor labels: Task
Description
Move a cursor label
Click the cursor label and drag the label to a new location.
Change the size of cursor labels Click the cursor label you want to resize. Place the mouse cursor on one of the sizing boxes, and drag the label to the new size. If you drag the corner of the label, the label text resizes to an optimal size for the label. Lock or unlock the cursor labels
Click theLock/Unlock Cursor Labels . When on, this command causes cursor labels to be “frozen” in the position.
The cursor label displays the following information: Cursor field
Applies to
Description
Pen Name
All Pen types Displays the non-unique Process Analyst pen name
Value/Quality
All Pen types Displays the value of the pen at the point the cursor intersects with the pen data
Date-Time Stamp All Pen types Displays the date/time stamp at the point the cursor intersects with the date/time axis. Alarm Sample Comment
Alarms
Comment bound to an alarm sample.
The fields are displayed in the cursor label using the order defined above using the format specified for the vertical axis. For example, if your vertical axis format is “km/h”, the label reads “
km/h”.
26
The label displays the following values when the quality of the data is not good: Cursor value
Description
NA
At the point of intersection the pen has no available data for display.
Gated
At the point of intersection the pen’s data has been gated.
Disabled
At the point of intersection the alarm tag of the pen was disabled.
The label value can also contain a directional indicator that functions as follows: Cursor value
Description
->
The cursor is to the left of the first available sample for this pen.
<-
The cursor is to the right of the last available sample for this pen.
Alarm label value
The alarm label value has the following format: state [acknowledgement]
where state refers to the alarm state at the point of intersection (see “Alarm pens”) and acknowledgement refers to the acknowledged state of the alarm at the point of intersection; i.e., Acknowledged or Unacknowledged.
Using the Right-click Menu Use the right-click (context) menu to quickly access frequently used commands. This menu is context-sensitive, providing relevant commands for different regions of the display. The right-click menu appears when you click any of the following regions:
Horizontal axis
Vertical axis
Background
Pen
The Properties command is always available on the right-click menu; this command displays the Properties dialog box. For details, see “Using the Process Analyst Properties Dialog Box”.
Understanding Mouse Pointers When using the Process Analyst, the mouse pointer changes shape to indicate the operations you can perform at that time. Mouse pointer Region Pen line
Description The mouse pointer looks like this when the pointer is on a pen. Clicking the mouse at this point selects the pen.
Pen line/pen The mouse pointer looks like this when the mouse is over a pen’s background background and both horizontal and vertical scrolling are enabled. Clicking and dragging at this point results in the free movement of the pen. Scrolling the mouse wheel results in horizontal-only movement.
27
Mouse pointer Region Horizontal axis
Description The mouse pointer looks like this when the pointer is on the horizontal axis and horizontal scaling is enabled. Clicking and dragging (or scrolling the mouse wheel) will result in the axis being scaled.
Pen line/pen The mouse pointer looks like this when the pointer is on the horizontal axis background and only horizontal scrolling is enabled. Clicking and dragging (or scrolling the mouse wheel) will result in the axis being scrolled. Vertical axis
The mouse pointer looks like this when the pointer is on the vertical axis and vertical scaling is enabled. Clicking and dragging (or scrolling the mouse wheel) will result in the axis being scaled.
Vertical axis
The mouse pointer looks like this when the pointer is on the vertical axis and only vertical scrolling is enabled. Clicking and dragging (or scrolling the mouse wheel) will result in the axis being scrolled.
Box Zoom mode
The mouse pointer looks like this when Box Zoom mode is enabled. See “Toggle Box Zoom”.
Adding and Deleting Pens Pens can be added to or removed from any pane. The Process Analyst allows Operators to search the trend tags and alarm tags that are defined on their trend and alarm servers and add pens that represent these tags to the current trend display.
Adding Pens
You use the Add New Pens dialog box to add a new pen to your trend display. To display the Add Pens dialog box, click Add Pens on the main toolbar. To add a new pen: 1
Select the Type of server you want to search: Trends or Alarms.
2
Type in a Tag Filter and/or Cluster Filter to apply to the search (optional). If you leave either of the Filter text boxes blank, all tags or clusters of the selected server type will be retrieved. The filters have basic wildcard and Boolean search functionality. You can use the keywords AND, OR and NOT with wildcard strings, as well as group Boolean terms using parentheses. For example, entering 'L*' in the Tag Filter returns all tags beginning with the letter “L” in all clusters. Entering ‘L* OR H*’ will find all tags beginning with “L” or “H”. More complex examples include ‘L* OR (H* AND NOT *G)’. This would return all tags that start with “L” or any that start with “H”, but do not end in “G”.
3
Click Search. The search results are returned in the Search list. The results are not sorted: the tags appear in the order they were configured in Vijeo Citect. The cluster associated with each tag is also displayed. The Process Analyst displays only the tags in clusters that this client has access to. In a system with more than one cluster, if a tag is not configured with a cluster, it is listed once for each cluster. The Search Result list displays a maximum of 100 entries at a time. If your search returns more than 100 results, use the First , Prev , Next , and Last buttons to navigate your search results.
28
4
Select one or more tags from the Search Results list. You can use the Ctrl and/or Shift keys to select multiple tags.
5
Select the destination pens to Add Add pens to. Pens can be added to any existing pane, or to a new pane.
6
Select a Pen Type. A trend tag can be represented by an analog or digital pen. An alarm tag can be represented by an alarm pen only.
7
Select how to resolve the pen name:
8
Comment - applies the tag comment as the pen name. Note that if the tag does not have a comment specified, a name is automatically generated.
Tag - applies the tag name as the pen name.
Auto -applies an automatically generated name to the pen using the format Pen where X is an incremented number, starting with the first available number.
Click Add. This moves all the selected items in the Search Results list into the Selected Items list. The Selected Items list contains all the tags that will be added as pens to the Process Analyst. You can perform multiple searches to add tags into the Selected Items list. Note: To remove a tag from the Selected Items list, highlight the item you want to move, and then click Remove.
9
To view details about a selected tag, click Show Detail. The Pen Detail box appears, showing defined information for the selected tag.
10 Click OK. Your selected tags appear on the trend display as pens. See Also
Deleting Pens
“Deleting Pens” Operators can delete pens from the trend display at any time. Note: Deleting a pen is different than hiding the pen from display by using the Visibility check box in the Object View. For details, see “Using Object View”. To remove a pen:
See Also
1
Select the pen you want to delete.
2
Click Remove Pen in the main toolbar. The pen is deleted from the display.
“Adding Pens”
Viewing Pen Details You can use the Pen Details box to view tag properties information for a selected pen. You access this box from the Add Pens dialog box. To view pen details: 1
Click Add Pens. The Add Pens dialog box appears.
2
Navigate to the tag you want to view details for. For details on searching tags, see “Adding Pens”.
29
3
Select the tag in the Selected Items list, and then click Show Detail. The Pen Details dialog box appears, showing the system information for the selected tag.
30
Chapter 5: Using Usin g the t he Obj Object ect View View The Object View provides a structured view of the pens displayed in the Process Analyst. You use the Object View to view information about the pens on the chart, along with information about associated tags. See Also
“Object View Basics” | “Using Object View” | “Configuring the Object View”
Object View Basics The Object View displays a hierarchically arranged view of the panes and pens on the chart, in the Object Tree column. The Object View lists information about each pen. When displayed, the Object View is located under the navigation toolbar. The Object View (as it appears in a default configuration) is shown below; your Object View might look different depending on how it has been customized in your system.
By default, all items in the Object View are expanded (that is, all pens for f or all panes are shown). Clicking a pen in the Object View selects that pen. There is always one pen selected in each pane; in the example above, the primary selected pen is highlighted in blue; all other selected pens are highlighted in gray. See Also
“Pen Selection” The Object View displays the following items: Ic o n
Ob j ec t Analog pen Digital pen Alarm pen Pane
The check box controls whether the pen is visible on the chart. The gradientfilled color box to the left of the pen name indicates the pen’s line color as it appears on the chart.
32
The Object View always mirrors the items that are displayed on a chart. For example, if you add a pane to the chart, a new pane is added simultaneously s imultaneously to the Object View. View. Similarly, if a new pen is added to or deleted d eleted from a pane, or if a pen’s pen’s properties are changed, these changes are reflected in the Object View. View. The table below shows the predefined default columns, which are displayed in addition to the object tree. These columns are arranged by default from left to right in the Object View. Co l u m n
Des c r i p t i o n
Zero Scale
Vertic tical ax axis star tart po positio ition n of of the the pe pen.
Full Scale
Vertic tical axis end positio ition n of the the pen.
Engine Engineering ering Units
Engine Engineering ering units units asso associate ciated d with with the pen pen..
You can configure the Object View to display other predefined columns that show different information about your pens; for details, see “Configuring the Object View”. View”.
Using Object Vie View w The table describes how to perform basic functions with w ith Object View. View. Tas k
Des c r i p t i o n
Toggle oggle the display of Object Object View on or or off ClickT ClickToggle Obj ect View on the main toolbar. Chang hange e the the size size of Objec bject Vie View w
Drag rag the the spli splitte tterr bar bar that that is locat locate ed bet betw ween een the the cha chart rt are area a and and the Object View up or down.
Expand or collapse a tree node in the Object Tree Tree column
Either click the (+) box to expand the node or the (-) box to collapse the node; or double-click the item to toggle between expanded and collapsed states. This does not affect the display of panes in the chart.
Select a pen
Click the pen in the Object View table. Selecting a pen in the Object View gives the focus in the chart to the selected pen, and vice versa. You can only select one pen per pane at a time (you cannot select a pane).
Disp isplay lay or hide ide a pen
Clic lick to clea lear the the check box to hide ide the pen; cli clic ck the the check box again to display the pen.
Dynam Dynamicall ically y change the width of a column Drag the column divider left or right. during display Note: Note: You can quickly resize a column to fit the size of the widest item in a column by double-clicking a column separator. To resize the column back to its original size, double-click the separator again. You can also configure the width of a column via the Process Analyst Properties dialog; for details, see “Configuring the Object View”. View”.
See Also
“Configuring the Object View”
Chapte hapterr 6: Prin Printin tingg and Exporting Exporti ng You can print detailed reports of your Process Analyst trends for management reports and other purposes. You can configure Process Analyst reports to include other print options designed to maximize the business busines s value of your reports. You You can also export pen data to the Windows Clipboard or to Microsoft Excel. Note: For details about general print options in Windows, refer to your Windows documentation. See Also
“About Process Analyst Reports” | “Configuring Process Analyst Report Options” | “Exporting Pen Data”
About Process Analyst Reports Process Analyst reports are formatted automatically by the system to make optimal use of the paper size and orientation. For example, if the page is small and the report contains a lot of information, the reports will use a smaller font to try to fit the information to the page. For larger pages, a larger font will be used. Reports use an Arial font between 8-14 points.
34
A typical Process Analysis report looks like this:
This example shows a report of a chart titled Citect Process Analyst ; the chart has only one pane, which contains three analog pens. The topmost pen in the report legend is highlighted, indicating indi cating that this pen is selected; consequently, the axes shown in the report are associated with this pen. You You can see that this pen is selected in the chart by the “halo” effect surrounding the pen. The color boxes on the left-hand side of the legend help you to distinguish between the pens. To print a report:
Click Print. Print. The Print dialog box appears. Click the Print button, or choose Print from the right-click (context) menu.
Configuring Process Analyst Re Report port Options You can configure Process Analyst reports to contain such things as specific items on a report legend (pen names, durations, engineering units, for example). You can also include header information and page numbers. You use the Print dialog box to configure Process Analyst reports. To display the Print dialog box, click Print on the main toolbar. After configuring your reports, click Print on the General panel of the Print dialog box to print your report. See Also
“Setting up report legends” | “Setting up report options”
35
Setting up report legends
You can configure your reports to include report legends . The information in the report legend is derived from the information properties of the underlying tag that is associated with a pen. If there are no information properties defined for a tag, this information isn’t available for a legend. You set up your report legends by using the Legend panel of the Print dialog box. To set up a report legend: 1
In the Print dialog box, click the Legend tab. The Legend panel appears.
2
The panel shows, by default, the Pen Options , Statistical Analysis Options , and Cursors lists (if there is a cursor currently displayed on the chart). The options available to you might differ from the ones shown here.
3
Select the check box of the Pen Options you want to include in your report. For details about these options, see “Configuring the Object View”.
4
Select the Statistical Analysis Options you want to include. Note that this section is available only if the chart contains at least one analog or digital pen.
Minimum - causes the minimum value from cache to be returned. Note that this value might not be a real logged sample if the sample found is a multiple calculated sample.
36
Setting up report options
Maximum - causes the maximum value from cache to be returned. Note that this value might not be a real logged sample if the sample found is a multiple calculated sample.
Average - uses time-weighted averaging to determine the average for both stepped and interpolated lines. This means that if a trend stays at a value of 10 for 1 hour and then spikes quickly at a value of 50 for a minute, the average will not be significantly affected.
5
Select the Cursors you want to include.
6
If you want to include a report legend, make sure the Include Legend check box is selected.
7
Click Apply.
You can configure your reports to include a report header, which can include a report title and comment. For multiple-page reports, you can include page numbers, which appear at the bottom of each report page. You set up your report options by using the Report panel of the Print dialog box. To set up report options: 1
In the Print dialog box, click the Report tab. The Report panel appears.
2
In the Header Information area, type a Title for the report. If necessary, include a Comment. Comments are printed under the report title on each report page.
37
3
To include a header, make sure the Include Header check box is selected.
4
To include page numbering, make sure the Include Page Numbers check box is selected.
5
Click Apply.
Exporti ng Pen Data You can export Process Analyst data for pens that are visible to either the Windows Clipboard (by using the Copy to Clipboard command) or to an Microsoft Excel-compatible file (Copy to File). When you export data, it is exported using a standard format of columns that represent time, milliseconds, and then a column per pen, as shown here: Time Milliseconds Pane1-Pen1 Pane1-Pen2 15/06/2004 01:17:25
100
NA
10
15/06/2004 01:17:26
100
1
20
15/06/2004 01:17:27
100
15/06/2004 01:17:28
100
Pane1-Pen3 Off Low [Unacknowledged] Low [Acknowledged]
3
25
Low [Acknowledged]
Export functionality doesn’t simply return the sample markers displayed on the graph. Instead, it exports an interpolated value per display period from the start time to the end time of the pen. The display period can be calculated by dividing the time span of the pen by the “IProcessAnalyst.NumberofSamples[Property][Get/Set]” property. Before exporting the data, the Process Analyst sorts all the timestamps for all pens from the earliest to the latest sample. When the pens are unlocked and have different time spans, the data for each pen might have different timestamps. As each entry is added to a row in the table, the value of the pen at that particular timestamp is exported. If a pen does not have a sample for that timestamp, the column for that pen is left blank. An export will also write values of NA, GATED and all alarm states as localized text when required. Pen columns use the format < pane>-< pen> where pane is the name of the pane that contains the pen, and pen is the name of the pen. See Also
Copying data to the Clipboard
“Copying data to the Clipboard” | “Copying data to file” Copying pen data to the Clipboard allows you to paste the data into another application, such as an Excel spreadsheet. To copy data to the Clipboard:
Copying data to file
1
Select the pen(s) you want to copy data for.
2
Click Copy to Clipboard , or select Copy from the right-click (context) menu.
Copying pen data to Microsoft Excel allows you to manipulate the data using spreadsheet application capabilities. Notes
38
The Time column is an encoded (OLEDATE) double value, which holds the date and time in seconds in local time. When exporting pen data to Excel, you should change the format of the Time column to dd/mm/yyyy hh:mm:ss so that the time is displayed correctly. Because the OLEDATE data type excludes milliseconds, a separate column is provided, which exports the millisecond component for each timestamp.
The results exported are in Unicode format. You should use Excel 2000 and later, which support this format.
To copy data to file: 1
Select the pen(s) you want to copy data for.
2
Click Copy to File. The Save As dialog box appears.
3
Enter a filename and click Save. The data is exported in a delimited format.
4
Open the file you just created, and complete the Text Import Wizard.
Chapter 7: Configuring the Process Analyst Many of the Process Analyst control’s properties can be configured at run time to allow an Operator to customize the control to suit their working preferences. To configure the Process Analyst, you use the Properties dialog box. See Also
“Using the Process Analyst Properties Dialog Box” “Configuring Chart-wide Properties” “Configuring Chart Panes” “Configuring Pens” “Configuring Cursors” “Configuring Defaults” “Configuring Toolbars” “Configuring the Object View” “Working with Views”
Using the Process Analyst Properties Dialog Box You use the Process Analyst Properties dialog box to configure Process Analyst views. You can also configure chart-wide properties. The Properties dialog box has three tabs, “Main page” , “Toolbars”, and “Object View”.
Main page
You use the Main page of the Properties dialog box to configure general properties and access the server path properties. The Main page looks like this:
The list on the left-hand side contains the property tree, a hierarchical list of Process Analyst interface components. Selecting an item displays the property
40
controls for that component on the right. The pens in the property tree indicate the information that the pen is trending. Using the property tr ee right-click menu
Right-clicking an item in the property tree displays the shortcut menu for that item, as shown below.
The tasks you can perform vary depending on your privilege level: if you don’t have the required privilege at run time to perform an action, that control is disabled/removed. For example, the right-click menu removes the Add Pen option at run time if you don’t have the privilege to add a pen. Commands that are unavailable appear “grayed-out.” The right-click menu contains the following options: Right-click this item... Actions Chart
Add Pane - add a new pane. Add Cursor - add a new cursor.
Pane
Add Digital - adds a new digital pen. Add Analog - adds a new analog pen. Add Alarm - adds a new alarm pen. Note: After adding a pen from this menu, configure the data connection by clicking the Connection tab and typing the name of the tag into theTag text box. Delete - deletes the pane.
Pen
Delete - deletes the pen.
Cursor
Delete - deletes the cursor.
Use the Main page for the following:
“Configuring Chart-wide Properties”
“Configuring Chart Panes”
“Configuring Pens”
“Configuring Cursors”
“Configuring Defaults”
Toolbars
You use the Toolbars page to configure the main toolbar and navigation toolbar. Operators and Users can configure the toolbars at run time and design time. Use the Toolbars page to configure the toolbars; for details, see “Configuring Toolbars”.
Object View
You use the Object View page to configure the Object View. Operators and Users can select (at run time and design time) the columns they want to display, as well as change the column width and display order. Users can define new columns and edit existing columns at design time.
41
Use the Object View page for the following:
“Configuring the Object View”
“Creating or Editing Object View Columns”
Configuring Chart-wide Properties You use the Main page of the Process Analyst Properties dialog box to configure chart-wide properties. Select Process Analyst at the top of the property tree to display the Process Analyst properties page. This page contains two tabs, General and Server Paths , used to modify the following configurations:
Configuring general properties
“Configuring general properties”
“Configuring server paths”
You can configure general properties such as the background color of the chart, the refresh rate, data request rate, number of samples for pens, and specify whether chart pens should be locked. The Administration area indicates the privilege setting for the current Operator. To configure general properties: 1
Click the General tab on the Main page.
2
Click the color swatch and select a Background color.
3
Specify a Display refresh rate. This value determines the rate at which the display data is refreshed on the display; it also controls how often the position of the Now indicator is refreshed. This control is disabled if you do not have appropriate privilege. The default value is 1000 milliseconds. The permitted range is between 10 milliseconds to 60,000 milliseconds. Note that specifying a rate below 500 is not recommended if your chart contains many pens, since this may negatively affect performance.
4
Specify a Data request rate.
42
This value determines the maximum frequency of data requests. The Process Analyst internally determines when a request is required, but you can use this property to cap the Process Analyst’s performance. This control is disabled if you do not have appropriate privilege. The default value is 1000 milliseconds. The permitted range is between 10 to 60,000 milliseconds. Note that this property affects trend server performance. 5
Specify a Number of Samples. This specifies the date/time axis span of each pen in number of samples. This control is disabled if you do not have the appropriate privilege. The default value is 300. The permitted range is between 10-5000. Also see “Exporting Pen Data”. Note: This value is closely tied to your display resolution. The default setting is ideal for screen resolutions from 1024x768 to 1280x1024. The association between Number of Samples and the display resolution occurs because for each sample shown on screen the Process Analyst attempts to leave a small gap to allow for sample markers. Because the Process Analyst shows samples when they occur, it requires less data than a traditional trend client. Retrieving data is expensive and the more data you retrieve the more time the request takes. It is recommended that this parameter not exceed 500 . The chart has a minimum resolution of one millisecond per sample. If the time span is reduced enough so that the number of samples exceeds the number of milliseconds in the time span, the number of milliseconds in the time span is used instead of the number of samples.
Configuring s erver paths
6
Select the Lock pens check box to lock your pens, or clear the check box to turn off pen-locking. For details on pen locking, see “Locking/Unlocking Pens”.
7
Click Apply.
You can configure the file server locations that the Process Analyst uses to load and save Process Analyst views, and displays the current Vijeo Citect run path if the Process Analyst is embedded in a running Vijeo Citect system. This command is disabled at run time if you do not have the appropriate privilege. For details about saving and loading views, see “Working with Views” and “Process Analyst View Synchronization”. The Process Analyst uses four possible storage locations:
User - maps to the client machine’s logged-in user ’s My Documents folder. This option is available for any possible privilege and Vijeo Citect mode.
Primary - User-definable.
Secondary - User-definable.
Local - displays the current Vijeo Citect run path (read-only). This text box only gets populated when the Process Analyst is running in Vijeo Citect V6.0 or higher. This path is an Analyst Views subdirectory under the Vijeo Citect current Run directory.
To configure server paths: 1
Click the Server Paths tab on the Main page.
43
2
Enter the location of the Primary file server.
3
Enter the location of the Standby file server (optional). This specifies the file server to use if the primary file server is unavailable.
4
Click Apply.
Configuring Chart Panes You use the Properties dialog box to configure chart panes. Af ter adding a pane, you can configure its size relative to other panes, as well as select a different color. All pane properties can be configured during run time. To add a pane:
In the property tree of the Properties dialog box, right-click the Process Analyst view item at the top of the tree, and then select Add Pane. (To remove a pane, right-click a pane in the tree and choose Delete.)
To configure the chart pane: 1
In the property tree of the Properties dialog box, select the pane you want to configure. The properties for that pane appear.
Note: To configure defaults for your panes, select the Pane item in the Default Settings node of the property tree, not a specific pane. 2
Click the color swatch and select a new Background color.
3
Select a Height option:
44
Variable - Automatically calculates the pane height based on the value in the Size control. For example, if the chart contains two panes, selecting this option and using a Size value of 110 will set this pane to 110% of the size of the other pane in the chart. Note that fixed height panes have precedence of variable-size panes.
Fixed - Sets the pane height to the value specified in the Size control.
4
Specify a Size for the pane.
5
Click Apply.
Configuring Pens The Process Analyst allows you to configure your pens to suit your preferences. Pen configuration tasks are performed by using the Properties dialog box, which is used for:
Configuring pen appearance
“Configuring pen appearance”
“Configuring pen gridlines”
“Configuring pen axes”
“Configuring pen quality”
“Configuring the pen data connection”
“Configuring cursor labels”
You use the Process Analyst Properties dialog box to configure the appearance of pens. Pen appearance can be configured at run time by Operators and Users (and at design time by Users). For details about pen appearance, see “Pen Types”. Note: To configure default settings for pen appearance, select Analog , Digital , or Alarm in the property tree under Default Settings , and then complete the procedure below for the type of pen you want to configure. Configuring analog and digit al pens
Configuring the appearance of analog or digital pens involves selecting the line color, stack property, line width, and either the method of interpolation (analog pens) or fill color (digital pens). To configure pen appearance: 1
Select the pen you want to configure.
2
Click the Appearance tab to display the appearance property controls.
45
3
Select a Line color using the color swatch.
4
Specify a Line width.
5
To stack a pen, select the Stacked option and then specify a Height in pixels for the stack.
6
Do one of the following:
7
For analog pens , choose an Interpolation method. Straight causes a line to be drawn directly between two data points. Stepped causes a line to be drawn between points maintaining the value of the previous sample until a sample with a different value arrives, in which case a vertical line is drawn. For digital pens , select the Filled check box, and then select a fill color from the color swatch.
Click Apply.
Configuring alarm pens
Configuring the appearance of alarm pens involves selecting the li ne color, stack property, line width, alarm type, and the properties for that alarm type. To configure alarm pen appearance: 1
Select the pen you want to configure.
2
Click the Appearance tab to display the appearance property controls for the selected alarm pen.
46
Configuring pen gridlines
3
Select a Line color using the color swatch.
4
Specify a Line width.
5
To stack a pen, select the Stacked option and then specify a Height in pixels for the stack.
6
Select an Alarm type. For details about the different types of alarm pen available, see “Alarm pens”. For information about alarm states, see “Alarm states”.
7
For each Label for the alarm type you selected, select a Style , a Fill color, and/or a Hatch color by using the swatches.
8
Click Apply.
You use the Process Analyst Properties dialog box to configure the gridlines for a selected pen. Pen gridlines can be configured at run time by Operators, and at design time by Users. For more information about pen gridlines, see “Gridlines”. Note: To configure defaults for pen gridlines, select the All pens item in the property tree under Default Settings , and then complete the procedure below. To configure pen gridlines: 1
Click the Main Page tab.
2
From the property tree list, select the pen you want to configure gridlines for.
3
Click the Gridlines tab to display the gridlines property controls.
47
Configuring pen axes
4
In the Vertical: Major area, select a Style , specify a Width , and then select a Color.
5
In the Vertical: Minor area, select a Style , specify a Width , and then select a Color.
6
In the Horizontal area (analog pens only), select a Style for the minor gridline, specify a Width , and then select a Color for the major gridline.
7
Do the same if necessary for the minor gridline.
8
Click Apply.
You use the Process Analyst Properties dialog box to configure the axis of the selected pen. A pen axis can be configured at run time by Operators, and at design time by Users. You can configure the color, line width, label type, scroll and scale properties for the date/time and value axes. You can also choose whether to display time on the date/time axis using local or UTC format. For more information about pen axes, see “Date/Time (Horizontal) Axis” and “Vertical (Value) Axis”. Note: To configure defaults for pen axes, select the All pens item in the property tree under Default Settings , and then complete the procedure below. To configure a pen axis: 1
Click the Main Page tab.
2
From the property tree list, select the pen you want to configure axes for.
3
Click the Axis tab to display the axis property controls.
48
4
In the Vertical area, select a Color by using the color swatch.
5
Enter a new Line width.
6
Select a Label type. This specifies the format to use for axis values.
7
Do one of the following (analog pens only):
Select the Autoscale option to autoscale the vertical axis.
Select the Interactive option, and then select Scale to be able to interactively scale the vertical axis; and/or select Scroll to be able to scroll the axis.
Note: These options are also available on the right-click (context) menu. 8
In the Horizontal area, select a Color by using the color swatch.
9
Select a Background color by using the color swatch.
10 Enter a new Line width. 11 Enter a Default Span to define the span you want to use for a new pen.
The default span is used by the Process Analyst when the Operator or User clicks the Reset to Default Span button, or if the pen is added in pen unlocked mode, or if the pen is the first one added to a display. If you’re setting the span value as a default setting for all new pens, the new span value is inherited by all news pens created. 12 Select the Local Time option to display the date/time axis in local time using
your machine settings. If this option is not selected, the time is displayed in UTC format. For details about time display on the date/time axis, see “Date/ Time (Horizontal) Axis”. 13 Select Scale to be able to interactively scale the vertical axis. 14 Select Scroll to be able to scroll the axis.
49
Note: The Scale and Scroll options are also available on the right-click (context) menu. 15 Click Apply.
Configuring pen quality
You use the Process Analyst Properties dialog box to configure the quality of the selected pen. Pen quality can be configured at run time by Operators, and at design time by Users. Configuring the pen quality allows you to define the appearance of sample markers on a selected pen, as well as the line styles of the pen, based upon the quality of the data being trended by the Process Analyst. For details about how the Process Analyst represents data quality, see “Data Quality”. To configure pen quality: 1
Click the Main Page tab.
2
Select the pen you want to configure.
3
Click the Quality tab to display the quality property controls.
4
To enable points for the pen to be visible, select the Points Visible option.
5
In the Point Styles area, select a Single point style to represent a single data sample.
6
Select a Multiple point style to represent multiple data samples.
7
Selected an Interpolated point style for interpolated data samples.
8
In the Line Styles area, select a line style to represent a Good sample.
9
Select a line style to represent a Gated/Disabled sample.
10 Select a line style to represent an NA sample. 11 Click Apply.
50
Configuring th e pen data connection
You use the Process Analyst Properties dialog box to configure the pen data connection. This allows you to define the server, trend tag, and request mode for the selected pen. Pen connection can be configured at run time by Operators and Users that have the appropriate privileges. To configure pen data connection: 1
Select the pen you want to configure.
2
Click the Connection tab to display the connection property controls.
3
For the Server data connection, a connection is selected by default, indicating that the Process Analyst will connect to the Vijeo Citect run time client running on the same computer, and pass its requests through to the client, which will pass them onto the server.
4
In the Trend tag field, enter the trend tag for the pen. In a system with more than one cluster, you should specify both the cluster and tag using the format . Omitting the cluster name will cause an error. If the system has only one cluster configured, you can just enter the tag name. The configured cluster will be assumed.
5
Select a Request mode. The default is Average. The request mode defines how multiple samples are treated by the Process Analyst. Regardless of the request mode used, the timestamp for a sample is always averaged.
6 See Also
Configuring cursor labels
Click Apply.
“Data Compaction” You use the Process Analyst Properties dialog box to configure the pen cursor labels. Configuring the pen cursor labels allows you to specify the color used for
51
the lines, background, and text on the cursor label. Note that the information shown on a cursor label is predefined and cannot be changed. For details about cursor labels, see “Using Cursor Labels”. Pen cursor labels can be configured at run time by both Operators and Users that have the appropriate privileges. To configure cursor labels: 1
Select the pen you want to configure.
2
Click the Cursor Label tab to display the connection property controls.
3
Select a Line color from the color swatch.
4
Select a Background color from the color swatch.
5
Select a Text color from the color swatch.
6
Click Apply.
Configuring Cursors You can configure the line width and line color of a selected cursor. Changes to the cursor line color apply only to the currently selected cursor. For details on cursors, see “Using Cursors”. To configure the cursor: 1
In the property tree of the Citect Process Analyst Properties dialog box, click the cursor you want to configure. The Appearance property controls appear.
52
2
Type in a new Width value, and/or select a new Color.
3
Click Apply.
Configuring Defaults The defaults are a collection of properties that are inherited by each item (pane, pen, cursor, and so on) when that item is created. These default properties are maintained for the lifetime of the item until its properties are modified. You configure these defaults in the same way as you configure the individual components. The Default Settings node on the property tree contains the following items:
All pens - configure the gridlines, axis, quality, connection, and cursor label properties for all pen types. See “Configuring pen gridlines” , “Configuring pen axes” , “Configuring pen quality” , “Configuring the pen data connection” , and “Configuring cursor labels”.
Cursor - configure cursor defaults. See “Configuring Cursors”.
Analog - configure the appearance of analog pens. See “Configuring pen appearance”.
Digital - configure the appearance of digital pens. See “Configuring pen appearance”.
Alarm - configure the appearance of alarm pens. See “Configuring pen appearance”.
Pane - configure the pane height and appearance defaults. See “Configuring Chart Panes”.
53
Configuring Toolbars The Process Analyst has two toolbars, the main toolbar and the navigation toolbar. You use the Properties dialog box to configure the toolbars.
Operators can configure the Process Analyst toolbars by:
“Adding or removing toolbar commands”
“Changing the order of toolbar commands”
Users can perform additional tasks such as:
Adding or removing toolbar commands
“Adding New Commands”
“Editing Existing Custom Commands”
Operators can add or remove toolbar commands during run time. To add or remove commands from a toolbar: 1
From the Toolbar menu, choose the toolbar you want to customize (Main Toolbar or Navigation Toolbar).
2
To add a command to the toolbar: In the Available toolbar buttons list, select the command you want to add to the toolbar, and then click Add. The selected command moves to the Current toolbar buttons list. The Available toolbar buttons list contains all the command buttons available in your system, including predefined as well as user-defined commands.
3
To remove a command from the toolbar: In the Current toolbar buttons list, select the command you want to remove from the toolbar, and then click Remove. The selected command moves to the Available toolbar buttons list.
54
Changing t he order of toolbar commands
Operators can change the order of toolbar commands during run time. To change the order of commands:
Select a command in the Current toolbar buttons list and click Move Up or Move down to move the selected command up or down the list as required.
Configuring the Object View Operators can configure the Object View to display additional pen information to the columns that are displayed by default. You configure the Object View by using the Properties dialog box. Operators can select which columns to display, as well as change the size of existing columns and the column display order. Users can define new columns, or edit or delete existing columns; for details, see “Creating or Editing Object View Columns”. You can configure the Object View to display these predefined columns: Column
Description
Scale
Vertical axis start and end position of the pen.
Engineering Units
Engineering units associated with the pen.
Comment
The trend/alarm comment defined for the pen.
Start Time
Date/time axis start position of the pen.
End Time
Date/time axis end position of the pen.
Duration
Difference between the start time and the end time.
Tag
Pen’s associated trend or alarm tag.
Trend Type
Trend type of associated tag.
Sample Period
Sampling period of the associated trend tag.
Engineering Scale
Engineering scale for associated trend tag.
Raw Scale
Raw scale for associated trend tag.
AlarmCategory
Category of associated alarmtag.
Alarm Description
Description of associated alarm tag.
Alarm Area
Area of associated alarm tag.
Alarm Name
Name of associated alarm tag.
Alarm Type
Alarm type of associated alarm tag.
Error
Displays the error of the last data request. Blank if last data request succeeded.
Minimum
Lowest displayed value (trend tags only).
Maximum
Highest displayed value (trend tags only).
Average
Average of all displayed values (trend tags only).
For information on columns that are displayed by default, see “Object View Basics”.
Object View properties page
The Object View properties page allows you to show or hide existing columns, create custom columns, edit existing columns, and re-order columns.
55
The Properties page displays all the available columns for the Object View and their properties:
NameID - Internal identifier, which must be unique.
Width - Default width of the column in pixels.
Display Text - Title displayed in the column header.
The check boxes in the NameID column are bound to a column’s visibility: a column is visible only if the associated checkbox is selected. The Move Up and Move Down buttons to the right of the Available Columns list box allow you to reorder columns. The order of the columns from top to bottom in the list dictates their display order from left to right in the Object View. Clicking Move Up or Move Down shifts the currently selected item up or down respectively. See Also
“Creating or Editing Object View Columns”
Working with Views An Operator can save the visual setup of a Process Analyst control by saving a view , which is saved as a Process Analyst View (.pav) file. They can also load views that have been created previously. A view saves the state of all commands, as well as properties for all the Process Analyst components (panes, pens, axes, backgrounds, and so on). To save a view or to load a view, you use the Save View and Load View commands, respectively, on the main toolbar.
56
Saving a view
A Process Analyst view stores the trends and alarms that are being displayed, the columns being viewed in the Object View, the toolbar buttons that are available, as well as the “look and feel” of the view. To save a view: 1
On the main toolbar, click Save View. The Save Process Analyst View dialog box appears, showing the location where you can save views.
2
Choose a location to save your view to. Note: It is your administrator’s responsibility to set up the correct directories for saving views.
3
Enter a File name for your view, and then click OK.
To support redundancy, if the Local option is available and selected, Vijeo Citect attempts to save the view to the primary, standby and local locations.
Loading a view
When loading a view, the start time and end time of a view is restored only autoscroll is off. If autoscroll is on, pens are synchronized to “Now.” When loading a view, the only locations that are available (My Documents , Primary , and Standby) are those that have been configured by your administrator. To load a view: 1
On the main toolbar, click Load View. The Load dialog box appears.
57
2
Select a view to load, and then click OK. The view is loaded.
58
Chapter 8: Operator Command Reference You use the toolbar commands on the main toolbar and navigation toolbar to perform commonly used functions for viewing and interacting with Process Analyst data, such as adding or removing pens, displaying cursors, and so on. Process Analyst has predefined commands, grouped into the following categories:
“View Commands”
“Zoom Commands”
“Navigation Commands”
“Export Commands”
“Interface Commands”
“General Commands”
The toolbars in your run time environment might have been customized during implementation, so not all these commands might appear on your toolbars. Additionally your toolbars might have custom commands not described here. The tables describe the default set of commands delivered with the Process Analyst.
View Commands The Process Analyst has the following view commands by default: Icon
See Also
Tooltip
Description
Save View
Displays the Save File dialog box allowing an Operator to save a Process Analyst view to a specified location. For details, see“Saving a view”.
Load View
Displays the Load View dialog box allowing the operator to specify a view to load. For details, see“Loading a view”.
“Zoom Commands” | “Navigation Commands” | “Export Commands” | “Interface Commands” | “General Commands”
Zoom Commands The Process Analyst has the following zoom commands by default: Icon
Tooltip
Description
Toggle Box Zoom
Toggles the Process Analyst into box zoom mode. The mouse cursor changes to a crosshair used to define an area to zoom in on. Zoom may be cancelled by right-clicking or toggling the Zoom command off. For details, see “Toggle Box Zoom”.
Zoomin 50%
Executes a horizontal and vertical zoomin of 50%of the current span(s) of the pen(s). For details, see“Zoom In/Zoom Out”.
Zoomout 50%
Executes a horizontal and vertical zoomout of 50% of the current span(s) of the pen(s). For details, see“Zoom In/Zoom Out”.
60
Icon
Tooltip
Description
Undo Last Zoom
Undoes the last zoom operation. For details, see“Undo Last Zoom”.
Reset to Default Span Restores the pen(s) spans to their original default settings. For details, see “Reset to Default Span”.
See Also
Edit Span
Displays the Edit Span dialog box allowing an operator to explicitly enter a time span to apply to the display. For details, see“Edit Span”.
Edit Vertical Scale
Enabled when an analog pen is selected. For details, see“Edit Vertical Scale”.
“View Commands” | “Navigation Commands” | “Export Commands” | “Interface Commands” | “General Commands”
Navigation Commands The Process Analyst has the following navigation commands by default. For details about these commands, see “Navigating time”. Icon
Tooltip
Description
Toggle Span Lock
Toggles the locking of the time span. A time span is the “distance” in time between the start time and end time of the chart. For details, see“Span Lock”.
Back One Span
Moves the pen(s) back in time exactly one time span. For details, see “Navigating time”.
Back Half a Span
Moves the pen(s) back half a span. For details, see“Navigating time”.
Forward One Span
Moves the pen(s) forward in time exactly one span. For details, see “Navigating time”.
Forward Half a Span
Moves the pen(s) forward half a span. For details, see“Navigating time”.
Synchronize to Now
Synchronizes pen(s) such that the end date time reflects “now” which is positioned on the right-hand edge of the screen. “Now” is calculated using the current system time. For details, see “Synchronize to Now”.
Toggle Auto-Scrolling Toggles the automatic scrolling off and on for all pens. For details, see “Toggle Autoscrolling”.
See Also
“View Commands” | “Zoom Commands” | “Export Commands” | “Interface Commands” | “General Commands”
Export Commands The Process Analyst has the following export commands by default: Icon
See Also
Tooltip
Description
Export to File
Copies visible pens to an Excel compatible file. For details, see“Copying data to file”.
Copy to Clipboard
Copies visible pens to the clipboard.Interface Commands. For details, see “Copying data to the Clipboard”.
“View Commands” | “Zoom Commands” | “Navigation Commands” | “Interface Commands” | “General Commands”
61
Interface Commands The Process Analyst has the following interface commands by default: Icon
Tooltip
Description
Show/Hide Cursor
Toggles the display of cursors. For details, see“Using Cursors”.
Show/Hide Cursor Labels Toggles the display of cursor labels. Enabled only when a cursor is visible and when a pen exists. For details, see“Using Cursor Labels”. Show/Hide Points
Toggles the display of points representing where sample data was recorded in the archive. For details, see“Pens: An Overview”.
Lock/Unlock Cursor Labels Toggles the locking/unlocking of cursor labels. Enabled only when a cursor is visible and when a pen exists. For details, see “Using Cursor Labels”. Lock/Unlock Pens
Toggles the locking/unlocking of pens. For details, see“Locking/ Unlocking Pens”.
Add Pane
Adds a new pane to the view. For details, see“Configuring Chart Panes”.
Remove Pane
Removes the pane of the primary selected pen. A dialog confirms the delete. For details, see“Configuring Chart Panes”.
Autoscale Vertical Axis for Toggles autoscaling for the selected pen on a per-pen basis. For Analog Pens details, see“Scaling the Chart”. Lock/Unlock Vertical Axis Scrolling
See Also
Toggles interactive scrolling of the vertical axis and disables autoscaling. For details, see“Scrolling the Chart”.
“View Commands” | “Zoom Commands” | “Navigation Commands” | “Export Commands” | “General Commands”
General Commands The Process Analyst has the following general commands by default: Icon
Tooltip
Description
Add Pen
Displays the add pen dialog. For details, see“Adding Pens”.
Remove Pen
Removes the selected pen fromthe display. For details, see“Deleting Pens”.
Toggle Object View Toggles the display of the Object View. For details, see“Using the Object View”.
See Also
Print
Displays the print dialog, allowing the user to print the current state of the Process Analyst. For details, see “Printing and Exporting”.
Refresh Data
Refreshes the data for the selected pen, or all pens (if locked).
Show Properties
Displays the Process Analyst Properties dialog box. For details, see“Using the Process Analyst Properties Dialog Box”.
Help
Displays the Process Analyst Help.
“View Commands” | “Zoom Commands” | “Navigation Commands” | “Export Commands” | “Interface Commands”
62
Part 1I Process Analyst for Users
This section contains information for Users and describes the following: “Integration with Vijeo Citect” “Configuring Process Analyst Design Time Properties” “Using the Process Analyst Command System” “Automation Model”
Chapter 9: Integration with Vijeo Citect The Process Analyst integrates seamlessly into the Vijeo Citect system and is designed to work primarily with the Vijeo Citect Graphics Builder and the run time environment. But the Process Analyst can also be embedded in custom Visual Basic and .NET applications. In these situations Vijeo Citect is still required. See Also
“Configuring the Process Analyst Control from Graphics Builder” | “Security and Permissions” | “Multi-language Support” | “Persistence” | “Backing up Projects”
Configuring the Process Analyst Control from Graphics Builder Being an ActiveX control, you can insert the Process Analyst onto a Vijeo Citect graphics page. To do this, do one of the following:
In Graphics Builder, choose Edit | Insert ActiveX Control. The Insert ActiveX dialog box appears. Double-click the Citect Process Analyst Control item in the ActiveX Controls list box. The control is inserted onto the graphics page and the Properties dialog box appears.
Click the Process Analyst button in the Graphics Builder toolbox.
After inserting the Process Analyst into a page, you can resize it into position. To view the configuration pages for the Process Analyst, double-click the Process Analyst control. For details on configuring the design time properties for the Process Analyst, see “Configuring Process Analyst Design Time Properties”. See Also
Tag association
“Persistence” Vijeo Citect can bind a Vijeo Citect tag to an ActiveX property and update either the tag or the property, based on a specified ActiveX event. You should note that the Process Analyst control does not support this feature.
Security and Permissions The Process Analyst integrates seamlessly into the Vijeo Citect security model by allowing access to certain Process Analyst features based on the privilege level of the currently logged in Operator. The Process Analyst has nine privilege levels. Privilege level zero (0) indicates there is no security and any user can perform the function. Levels 1-8 map directly to the eight (8) privilege levels of security provided by Vijeo Citect. The Process Analyst, by default, assumes the area of the page that it is situated on; this can be changed in the Graphics Builder. So if an operator has area access for the page and has privilege level 1, and the function they want to use is level 2, the function will be unavailable. If the operator had level 2, the function would
66
then become available. The Process Analyst also supports the Vijeo Citect Hierarchical Privilege security option. Security can be applied to the following features:
Administration privilege
Administration; for details, see “Administration privilege”.
Commands; for details, see “Command privilege”.
Saving Process Analyst views (write privilege); for details, see “Write privilege”.
The Process Analyst also uses an Administration privilege level to disable engineer-oriented features at run time. For example, the ability to add new custom commands and so on are all disabled if the Operator does not meet the required privilege level. The Administration privilege level should never be zero on a running system as this would expose properties to an Operator, which could adversely affect the performance of the client and/or server (e.g., Number Of Samples property). The features that are disabled when an operator does not meet the Administration privilege level include:
Add Pen context menu in Property dialog box.
New/Edit/Delete command (includes changing the privilege of commands).
New/Delete Column.
Data Refresh Rate property.
Display Refresh Rate property.
Number Of Samples property.
Server Paths tab.
Server field on Connection tab.
Tag field on Connection tab.
To modify the Administration privilege level, see “Configuring Chart-wide Properties”.
Command privilege
See Also
Write privilege
The Process Analyst allows a privilege level to be assigned to each command (standard or custom command). If an Operator does not have the required privilege level to use that command, the associated toolbar button is disabled and cannot be executed. “Editing Existing Custom Commands” The Process Analyst uses a concept of “write” privilege level to control whether an operator can save Process Analyst views to a location other than "My documents". These views can then be loaded into the Process Analyst later by any Operator. The write privilege is set at design time on the Server Paths property page located on the root Process Analyst node in the Property pages dialog box. If the write privilege level is set to zero (0), any operator can save to any location. If the write privilege is any other level, the Operator must have that
67
privilege level to be able to save an Analyst view to a location other than "My Documents". See Also
“Configuring server paths” | “Working with Views” | “Process Analyst View Synchronization”
Multi-language Support The Process Analyst supports the Vijeo Citect multilanguage ability of changing the user interface language dynamically at run time. If the language is changed in Vijeo Citect, the Process Analyst will change its language to match. The process of configuring the Process Analyst for multiple languages is different from that of Vijeo Citect. This section describes how to localize the Process Analyst user interface and get it to work with Vijeo Citect.
Understanding the Process Analyst resources
The Process Analyst uses a special file, called Resources.dll, to store all of its display strings and dialog boxes. This file holds the native translations for your version of the Process Analyst; these native translations are considered the default language. For example, the Japanese version of the Process Analyst will contain Japanese resources inside the Resources.dll file. A separate Resources.dll file must be created for each individual language that you want to support in your system. The file should be renamed using a special format to indicate the language. The Process Analyst expects the file to be named Resources_.dll , where is the unique identifier of your dll. For example, if you are creating French resources, your dll should be named Resources_fr.dll. Vijeo Citect uses the RFC 1766 standard for specifying culture names.
See Also
“Creating your own Process Analyst resource.dll” All language Resources*.dll files must be placed in the same directory as the Analyst.dll file. The example below shows a system that contains English as the default, and has alternative languages of French, German and Chinese.
Using Vijeo Citect to switch the Process Analyst language
Resources.dll (default - any language, e.g. English)
Resources_fr.dll (French standard)
Resources_zh-CN.dll (Chinese PRC)
Resources_de.dll (German)
Vijeo Citect uses the Cicode function SetLanguage to switch languages at run time. To allow the Process Analyst to determine the language it should display, you must map your Vijeo Citect language databases to the Process Analyst resource files. To do this, add a new .ini section called [ProcessAnalyst] to the Citect.ini file on all your Vijeo Citect clients and servers, and create a mapping for each language. (Note that this section might already exist in your Citect.ini file.) The mapping must use this format:
68
LanguagePath.=
where is the name of a specific Vijeo Citect language translation database, and is the language code of the resources.dll file that has the equivalent translations. For example, [ProcessAnalyst] LanguagePath.French=fr LanguagePath.Chinese=zh-CN LanguagePath.German=de
The last step is to ensure each of your machines contains the necessary lang uage fonts. Windows XP and Windows 2000 both provide facilities to add the necessary languages to your machine via the Regional and Language Options dialog box, accessible from the Control Panel. This step is essential if you want to use Asian languages on an English operating system. See “Creating your own Process Analyst resource.dll” for details on adding languages to your system. With the .ini file now configured, languages installed, and the Resource.dll files in place when the SetLanguage Cicode function is called, Vijeo Citect and the Process Analyst will automatically change into the selected language.
Manually switch ing languages
The Process Analyst can also switch languages by itself using the IProcessAnalyst.Language property. You can call this property directly from Cicode, for example. Note: Using this method will only switch the Process Analyst language and not the one used by Vijeo Citect. See “IProcessAnalyst.Language [Property] [Get/ Set]”.
Specifying languages for t he Web Client
A Process Analyst running inside a Vijeo Citect Web Client also supports run time language switching, but you must configure the languages that the Web Client will download to the client machine. To configure the languages to download: 1
Create a zip file in the Vijeo Citect \bin folder called bin.zip.
2
Add to the zip file all the language resource DLL files that you want the client to download and use. (You can find these files in your \Program Files\Common Files\Citect folder.) Note: The bin.zip file and its contents are not version-checked. This means you must manually remove the bin.zip from the Web Client machines if your server contains a more recent bin.zip file. To do this:
Creating yo ur own Process Analyst resource.dll
1
Find the installation directory of the Analyst.dll file on your Web Client machines and look for a file called bin.zip in this directory.
2
Delete this file.
3
Reconnect to the Web server to download the latest bin.zip file.
To create your own resources dll, you need to do the following: 1
Install the specific languages you are localizing on your Windows system.
2
Set your system to use that specific language.
69
Note: To create your own resources.dll file, you’ll need to use Microsoft Developer Studio 6 or an equivalent tool. Setup for localization on Windows XP
You must have Administrator privileges to perform the following setup. 1
Open Control Panel and double-click Regional and Language Options.
2
Click the Languages tab.
3
If localizing for East Asian languages, select the Install files for East Asian languages check box, then click OK.
4
Once the languages are installed, click the Languages tab in the Regional and Language Options dialog box.
5
Click Details in the Text services and input languages section to display the Text Services and Input Languages dialog box.
6
In the Installed services section, ensure that the language you want to localize with is listed. If not, add it. 1
To add a language, click Add to display the Add Input Language dialog box.
2
Select the language you want from the Input language menu and click OK. (You might need your original Windows Installer CD.)
3
You might need to restart your system before the language is available. If not, click Apply and then OK to close the Text Services and Input Languages dialog box and return to the main window under the
70
Languages tab. If you need to restart your system, return to the Regional and Language Options dialog box after logging back into Windows. Be sure to login as an Administrator. 7
Click the Advanced tab in the Regional and Language Options dialog box.
8
Select the language you want from the menu in the Language for NonUnicode Programs section.
9
Click Apply and then OK (you may need to restart your system).
Setup for loc alization o n Windows 2000
You must have Administrator privileges to perform the following setup. 1
Open Control Panel and double-click Regional Options.
2
On the General tab under Language Settings for the System, make sure the language you want to localize with is in the list and "Checked". If it is not, you must add it. 1
To add a language, click the Input Locales tab.
2
Click Add to display the Add Input Locale dialog box.
3
Select the language you want from the list.
4
Click OK and follow the on-screen prompts. Note: You will need your original Windows Installer CD.Once the language has been installed, repeat steps 1 and 2, and continue on to 3.
3
Click the Input Locales tab.
71
4
Ensure that your language is listed in the Installed input locals list.
5
Click back to the General tab.
6
Click Set default to display the Select System Locale dialog box.
7
From this list, select the language that you want to localize to and click OK. This step is essential if you are using Asian characters on an English system. (This may require a system restart.)
Note: When you are finished localizing, you should switch this option back to its original setting. Changing the input language
When your system has been configured to use multiple languages, you will find a new icon in the system tray displayed as "EN" or similar. To change input language: 1
Click EN to display the input language option menu.
2
Select the language you want to use (to work correctly with Visual Studio, this should match the language you selected in Step 8 of the Windows XP setup and Step 7 of the Windows 2000 setup). This might display a language-specific IME editor, which allows you to select characters to use in your translations.
Localizing the Process Analyst resource dll
Once you have set up your system to cope with multiple languages, you can begin localizing. Do the following: 1
Open Microsoft Visual Studio 6.
2
Choose File | Open.
72
3
Browse to the location of the Process Analyst's Resources.dll file. By default it is located at C:\Program Files\Common Files\Citect\.
4
Ensure that the Files of type menu has Executable Files (.exe;.dll;*.ocx) selected.
5
Ensure that the Open as menu has Resources selected.
6
Select Resources.dll and click Open.
7
Save the file under a new name. For example, if you are localizing for Japanese, use Resources_ja-JP.dll. See “Understanding the Process Analyst resources” for naming conventions.
8
Before changing any string, you must change the language code for each dialog box and the string table by doing the following: 1
Expand the String Table folder in the tree.
2
Right-click the String Table entry.
3
Choose Properties from the right-click (context) menu (see below).
4
From the Language menu, select the language that you are localizing for.
5
Click Close in the top-right corner of the dialog.
6
Repeat these steps for each of the dialogs inside the Dialog folder.
Once the language code has been set for all dialogs and the string table, you are ready to begin changing the text. Localizing dialog boxes To localize a dialog box, do the following: 1
Expand the Dialogs folder in the tree.
2
Double-click a dialog to edit.
3
Select an item of text and right-click to display the properties for that item.
4
Enter your replacement text into the Caption field.
5
Click the Close button in the top-right corner of the dialog box.
You should note the following:
73
Controls can be repositioned or resized if necessary to fit your replacement text.
Never resize a dialog box. The size of a dialog box is set to an optimum size so that it integrates into Graphics Builder correctly.
Dialogs 3028 and 3050 do not require translation.
Localizing the String Table To localize the string table, do the following: 1
Expand the String Table folder in the tree.
2
Double-click the String Table entry. This will display a table showing you all the strings of the Process Analyst.
3
Double-click an entry to display the Properties dialog box.
4
Type in the replacement text in the Caption box.
5
Click the Close button in the top-right corner of the dialog box.
Note: When translating strings, if a string contains “%s”, “%x”, “%d” and so on, do not remove or replace those symbols as they are important to the Process Analyst.
Persistence Persistence refers to saving the state (properties, pens, and s o on) of the Process Analyst to disk. Vijeo Citect and the Process Analyst provide the following methods of persistence:
Saving while using the Citect Graphics Builder
Saving as part of a Citect Graphics Builder page (design time)
Save View toolbar button on the Process Analyst (run time)
SaveToFile automation method on the Process Analyst (run time)
Saving between Citect page transitions (run time)
This feature allows you to configure the default look and/or what pens will be displayed on the Process Analyst at design time while you are designing your graphics pages. Design time is the appropriate time to configure the appearance properties, toolbar buttons and, most importantly, the security of the Process Analyst since these will become the default settings of the Process Analyst when your page is displayed at run time. When a page containing the Process Analyst is saved in the Graphics Builder all the properties you configured on the Process Analyst will be stored within the Graphics Builder page. Note: When defining new custom toolbar buttons, any icon you assign will be copied and also stored within the Graphics Builder page. This allows your custom toolbar buttons to work on any machine.
Using the Save View toolbar button
This feature is valid only at run time and allows operators to save the current state of the Process Analyst (called a view) to a standalone file. These files can be loaded during run time, and are an efficient way to store commonly used pen configurations.
74
Using the SaveToFile automation method
This feature is valid only at run time and allows a user to write Cicode to save the current state of the Process Analyst to a standalone file, referred to as an Analyst view. These files can be loaded during run time using the LoadFromFile automation method (or the Load View toolbar button). Views and are an efficient way to store commonly used pen configurations.
Saving between Vijeo Citect page transitions (Run-time)
Using Vijeo Citect run time, if you modify the Process Analyst (for example, changing the timespan of a pen) and move off the page, your changes will be lost. This behavior is not always what you want, so the Citect Graphics Builder provides an option Persist ActiveX data between page transitions to save the state of an ActiveX control when you switch between pages. Enabling this option causes Vijeo Citect to write a temporary file to the Vijeo Citect Data directory in the format of < Event class>.stg whenever you leave a page that contains an ActiveX object (e.g., the Process Analyst). When you reenter the page, Vijeo Citect looks for that same file and, if found, will load the settings from it. These files only exist while Vijeo Citect run time is running. When you shut down Vijeo Citect, the temporary *.stg files are deleted. To save between page transitions:
Resetting back to the default state
1
Double-click the Process Analyst ActiveX control you want to change. The Properties dialog box appears.
2
Click the Access tab.
3
Click the Identification tab. The Identification panel appears.
4
In the Persistence area, select the Persist ActiveX data between page transitions check box, and then click Apply.
You can reset the original configuration of the Process Analyst control by calling the Cicode function ObjectResetState. This function takes the object handle of the Process Analyst control, which you retrieve by using the Cicode function ObjectByName.
75
Backing up Projects When you save views to the Local storage location, the Process Analyst will create a *.pav file in an Analyst Views subfolder under your project directory. If your project contains Analyst views, you should ensure that the Save subdirectories option is selected in Citect Explorer before backing up your project.
76
Chapter 10: Configuring Process Analyst Design Time Properties Most Process Analyst properties can be defined or modified during run time and design time. This section describes properties that can be configured only during design time, usually by a User. For information about configuring run time properties, see “Using the Process Analyst Properties Dialog Box”. See Also
“Adding New Commands” | “Editing Existing Custom Commands” | “Creating or Editing Object View Columns” | “Process Analyst View Synchronization”
Adding New Commands Users can define new toolbar commands during design time if they have the appropriate privilege level. To add a new command: 1
On the Toolbars page of the Properties dialog box, click New. The New Command dialog box appears.
2
The dialog shows the unique, system-generated ID for the new command. If necessary, enter a new ID for the command. This ID can be used in Cicode to determine which command has been triggered or to find a specific command in the Vijeo Citect system.
78
See Also
3
Enter the Tooltip text for the new command. You are limited to 64 characters. Tooltip text appears when the mouse pointer is over the toolbar command.
4
Click Browse and navigate to the icon to represent the new command. The icon image appears on the toolbar command button.
5
To define how the command behaves, choose a button style from the Button style menu:
Push Button - click the Enabled check box to set the default appearance of the button when the button is enabled or disabled.
Toggle Button - click Enabled or Pressed to specify the “on” appearance.
“Editing Existing Custom Commands”
Editing Existing Custom Commands Users can edit existing toolbar commands if they have the appropriate privilege level. Commands can only be edited during design time, and only fields for custom commands can be edited. To edit an existing custom command
See Also
1
Open the Properties dialog box and click the Toolbars tab.
2
Select the command you want to edit in the Available toolbar buttons list box, and then click Edit. The Edit Command dialog box appears.
3
If required. click Browse to navigate to a new icon to use for the command.
4
If required, edit the Tooltip text. The maximum length for Tooltip text is 64 characters.
5
If required, choose a new button style from the Button style menu.
“Adding New Commands”
79
Creating or Editing Object View Columns Users can create or delete Object View columns (during desig n time), as well as edit existing columns (run time or design time). Object View columns display information about your pens. All these configuration tasks are performed by using the Citect Process Analyst Properties dialog box. To create an Object View column: 1
Click the Object View tab. The Object View panel appears.
2
Click New. The New Column dialog box appears.
3
Enter a Name ID for the column. The value is used to reference the column in code.
4
Specify a Width.
5
Enter the Text to use for the column in the Object View display.
To delete an Object View column:
Select the column you want to delete and click Delete.
To edit an Object View column:
See Also
1
Select the column you want to edit, and then click Edit. The Edit Column dialog box appears.
2
Modify the information as required, and then click OK.
“Configuring the Object View”
Process Analyst View Synchronization The Process Analyst implements a basic level of file synchronization for Process Analyst views (.pav files). This feature causes the Process Analyst to try and obtain the latest version of a .pav file before displaying it to the operator. To achieve this, an engineer must first configure the Process Analyst to support Primary and Standby server locations for Analyst Views; for details, see “Configuring server paths”. With these file servers in place, the Process Analyst now has a central location from which to obtain Process Analyst views. If one of the locations is unavailable, the operator can try the alternate location. When a client saves or
80
loads a Process Analyst view, only that view on the Primary and Standby server locations will be synchronized to ensure they are all the same. The table below outlines the rules of synchronization and privilege for the storage locations and client modes when loading and saving Process Analyst views. A cti on
Vi jeo Ci tec t m ode
Pr iv ilege
Av ai labl e Stor age Loc at io ns *
Load
Normal client
Both**
The Primary and Standby options appear as configured as well as My Documents. If either are invalid or unavailable paths, they do not appear. If both are invalid or unavailable, the Local option appears. Default order is Primary, Standby, My Documents, and Local, My Documents respectively. Synchronization occurs when loading from a Primary or Standby location.
Load
Web client
Both**
The Local and My Documents options are the only ones available. Local maps to the project directory\Analyst Views. The default order is Local, My Documents.
Save
Normal client
Privileged
The Local and My Documents options are the only ones available. Local however will attempt to save to all server locations as well as the project directory. The .pav file will be saved to all available locations from primary, standby and project directories. Default order: Local, My Documents.
Save
Normal client
Unprivileged The My Documents option is the only one available.
Save
Normal client
Both**
The My Documents option is the only one available.
* Refers to the Look in menu on SaveView and Load View dialog boxes. ** Means both privileged and un-privileged. When setting up file-servers to store Process Analyst views, ensure that each client machine has privileges enabling it the desired read/write access to those locations. See Also
“Configuring server paths” | “Working with Views” | “Write privilege”
Chapter 11: Using the Process Analyst Command System This section describes how to use the Process Analyst command system. See Also
“Command System Overview” | “Custom Commands” | “Icons”
Command System Overview The Process Analyst provides an extensive command system allowing manipulation of common Process Analyst features, as well as providing the framework for creating custom user-defined commands. The command system is configurable via the Toolbar property page and the automation model. To access the command system via the automation model, call the property GetCommandSystem() from the IProcessAnalyst interface. For details, see “IProcessAnalyst Interface”.
Custom Commands Custom commands are defined in the Process Analyst, but must be implemented in Cicode. You define commands by using the ICommandSystem> Create method, or by using the New button on the Toolbar property page. To implement the command, you must respond to the event CommandExecuted (and optionally UpdateCommand). Both of these events notify you of the ID of the command which needs to be handled.
CommandExecuted
When an operator presses the toolbar button representing your command, it will trigger this event. This is your opportunity to execute the desired functionality of the command. This will not be triggered if the logged-in user fails to meet the required privilege level. Be aware that this is an asynchronous operation.
UpdateCommand
When the Process Analyst requires the Enable state or pressed states of its toolbar buttons to be refreshed, this event will be triggered. This will not be triggered if the logged-in user fails to meet the required privilege level. Note that this is asynchronous operation. The state of all commands (custom and pre-defined) will be saved to disk whenever the Process Analyst configuration is saved.
See Also
“Persistence”
Icons For custom commands, the user can specify their own custom icons by pointing to a file on their hard drive. As these files may be deleted or moved over time, the Process Analyst makes an instant copy of the icon into memory when the
82
command is added. This removes any dependence on the original icon file. When the Process Analyst configuration is saved, the icon data is also saved.
Chapter 12: Automation Model The automation model allows applications or solutions to programmatically configure the Process Analyst control’s appearance, performance, and behavior. The automation model also allows code, via automation events, to be attached to events fired from the Process Analyst Control and perform custom behavior. The automation model allows almost every visual aspect of the control to be configured, as well as performance. It is simple and follows a traditional objectoriented approach (see below). To view information for an interface, click the name of the interface in the illustration below. For example, to view information for the IPens interface, click IPens.
Execution Results Each property and method listed in the automation model will return one of the following results upon execution. The exact meaning is described in the Execution Result section for each property or method. Execution Result
Cicode
VBA
C++
InvalidArgument
274
5
E_INVALIARG
GeneralFailure
356
2147500037
E_FAIL
PathNotFound
356
76
STG_E_PATHNOTFOUND
Success
0
-
S_OK
Errors are captured differently in Cicode and VBA. The following code examples show how to trap and handle errors in VBA and Cicode. [VBA] Sub VBATest(myObject As Object) On Error Goto errHandler myObject.
84
Exit Sub errHandler: Print Err.Number, Err.Description Resume Next End Sub
[Cicode] FUNCTION Test1(OBJECT hObject) ErrSet(1); // Enable User error checking (disabled HW alarm) IF ObjectIsValid(hObject) THEN _ObjectCallMethod(hObject, ""); error = IsError(); errorMessage = IntToStr(error) IF (error <> 0) THEN Message("An error occured", errorMessage, 0); END END ErrSet(0); // Enable hardware alarm reporting of errors END
Interfaces IAlarmPen Interface IAnalogPen Interface ICommand Interface ICommandSystem Interface ICursors Interface IDigitalPen Interface IObjectView Interface IObjectViewColumn Interface IObjectViewColumns Interface IObjectViewItem Interface IObjectViewItems Interface IObjectViewPenItem Interface IPane Interface IPanes Interface IPen Interface IPens Interface IProcessAnalyst Interface IToolbar Interface IToolbars Interface IToolbarButton Interface IToolbarButtons Interface ITrendCursor Interface
Events CommandExecuted [Event] CursorMoved [Event] Error [Event] HorizontalAxisChanged [Event] MouseClick [Event] MouseDoubleClick [Event] OVColumnAdded [Event] OVColumnRemoved [Event] OVItemAdded [Event]
85
OVItemChecked [Event] OVItemSelected [Event] PenCreated [Event] PenDeleted [Event] PenRenamed [Event] PenSelectionChanged [Event] PropertyChanged [Event] UpdateCommand [Event] VerticalAxisChanged [Event]
Enumerations AlarmType [Enumeration] AxisLabelType [Enumeration] ErrorNotifyCode [Enumeration] FileLocation [Enumeration] HatchStyle [Enumeration] LineStyle [Enumeration] LineType [Enumeration] PenNameMode [Enumeration] PenType [Enumeration] PointType [Enumeration] QualityCompactionType [Enumeration] QualityType [Enumeration] RequestMode [Enumeration] ToolbarButtonType [Enumeration]
IAlarmPen Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IAlarmPen
Methods (6) IAlarmPen.GetFillColor [Method] IAlarmPen.SetFillColor [Method] IAlarmPen.GetHatchColor [Method] IAlarmPen.SetHatchColor [Method] IAlarmPen.GetHatchStyle [Method] IAlarmPen.SetHatchStyle [Method]
Properties (3) IAlarmPen.LineColor [Property][Get/Set] IAlarmPen.LineWidth [Property][Get/Set] IAlarmPen.AlarmType [Property][Get/Set]
IAlarmPen.LineColor [Property][Get/Set]
Gets or Sets the color that will be used to draw the pen line. Defined As
[VBA] Long LineColor
[Cicode] INT LineColor
86
[C++] OLE_COLOR LineColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red) where red, green, and blue are 0-255. Calling Syntax This example assumes there is a valid alarm pen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim lineColor As Long ‘Getting Property value lineColor = alarmPen.LineColor ‘Setting Property to red alarmPen.LineColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Getting property value INT nLineColor = _ObjectGetProperty(hAlarmPen, "LineColor"); // Setting property to red _ObjectSetProperty(hAlarmPen, "LineColor", 255); END
IAlarmPen.LineWidth [Property][Get/Set]
Gets or sets the width in pixels of the pen line when it is drawn. Defined As
[VBA] Long LineWidth
[Cicode] INT LineWidth
[C++] int LineWidth
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Limits
Minimum = 0
Maximum = 8
Calling Syntax
87
This example assumes there is a valid alarm pen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim lineWidth As Long ‘Getting Property value lineWidth = alarmPen.LineWidth ‘Setting Property value alarmPen.LineWidth = 5 End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Getting property value INT nLineWidth = _ObjectGetProperty(hAlarmPen, "LineWidth"); // Setting property value _ObjectSetProperty(hAlarmPen, "LineWidth", 5); END
IAlarmPen.AlarmType [Property][Get/Set]
Gets or Sets the display type of this alarm pen. Defined As
[VBA] Long AlarmType
[Cicode] INT AlarmType
[C++] AlarmType AlarmType
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks This AlarmType also dictates the number of alarm states, and their descriptions. See Also
IAlarmPen.AlarmType [Property][Get/Set]
Calling Syntax This example assumes there is a valid alarm pen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim alarmType As Long ‘Getting Property value alarmType = alarmPen.AlarmType ‘Setting Property value to Analog alarmPen.AlarmType = 1 End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Getting property value INT eAlarmType = _ObjectGetProperty(hAlarmPen, "AlarmType");
88
// Setting property to Analog _ObjectSetProperty(hAlarmPen, "AlarmType", 1); END
IAlarmPen.GetFillColor [Method]
Gets the color used to fill the pen for the specified state. Defined As
[VBA] GetFillColor(state as Long) as Long
[Cicode] INT GetFillColor(INT state)
[C++] HRESULT GetFillColor(int state, OLE_COLOR* color)
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Parameters state [in] The
state for which fill color to retrieve (0 to 8).
Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim fillColor As Long fillColor = alarmPen.GetFillColor(0) End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) INT nFillColor = _ObjectCallMethod(hAlarmPen, “GetFillColor” , 0); END
IAlarmPen.SetFillColor [Method]
Sets the color used to fill the pen for the specified state. Defined As
[VBA] SetFillColor(state as Long, color as Long)
[Cicode] INT SetFillColor(INT state, INT color)
[C++] HRESULT SetFillColor(int state, OLE_COLOR color)
Parameters state [in] The
state for which you would like to assign a fill color (0 to 8).
89
color [in] The
fill color that you would like used to for this specific state.
Execution Result If the function succeeds, the return value will be Success. If the state is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red) where red, green, and blue are 0-255. Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim fillColor As Long ‘Setting FillColor to Red alarmPen.SetFillColor(0, 255) End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Setting FillColor to Red _ObjectCallMethod(hAlarmPen, “SetFillColor” ,0, 255); END
IAlarmPen.GetHatchCol or [Method]
Gets the color used to draw the outline and hatching for the specified state. Defined As
[VBA] GetHatchColor(state as Long) as Long
[Cicode] INT GetHatchColor(INT state)
[C++] HRESULT GetHatchColor(int state, OLE_COLOR* color)
Execution Result If the function succeeds, the return value will be Success. If the state is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Parameters state [in] The
state for which hatch color to retrieve (0 to 8).
Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red)
90
where red, green, and blue are 0-255. Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim hatchColor As Long hatchColor = alarmPen.GetHatchColor(0) End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) INT nHatchColor = _ObjectCallMethod(hAlarmPen, “GetHatchColor” , 0); END
IAlarmPen.SetHatchCol or [Method]
Sets the color used to draw the outline and hatching for the specified state. Defined As
[VBA] SetHatchColor(state as Long, color as Long)
[Cicode] INT SetHatchColor (INT state, INT color)
[C++] HRESULT SetHatchColor (int state, OLE_COLOR color)
Parameters state [in] The
state for which you would like to assign a hatch color (0 to 8).
color [in] The
color that you would like to be used for a specified states hatch.
Execution Result If the function succeeds the return value will be Success. If the state is out of range then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red) where red, green, and blue are 0-255. Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim hatchColor As Long ‘Setting HatchColor to Red alarmPen.SetHatchColor(0, 255) End Sub
91
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Setting HatchColor to Red _ObjectCallMethod(hAlarmPen, “SetHatchColor”,0, 255); END
IAlarmPen.GetHatchStyl e [Method]
Gets the hatch style used when drawing the boxes for the specified state. Defined As
[VBA] GetHatchStyle(state as Long) as Long
[Cicode] INT GetHatchStyle(INT state)
[C++] HRESULT GetHatchStyle(int state, HatchStyle* color)
Parameters state [in] The
state for which you would like to retrieve a hatch style (0 to 8).
Execution Result If the function succeeds the return value will be Success. If the state is out of range then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. See Also
IAlarmPen.GetHatchStyle [Method]
Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) Dim hatchStyle As Long hatchStyle = alarmPen.GetHatchStyle(0) End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) INT nHatchStyle = _ObjectCallMethod(hAlarmPen, “GetHatchStyle”, 0); END
IAlarmPen.SetHatchStyl e [Method]
Sets the hatch style used for drawing the specified state. Defined As
[VBA] SetHatchStyle(state as Long, HatchStyle as Long)
[Cicode] INT SetHatchStyle (INT state, INT hatchStyle)
[C++] HRESULT SetHatchStyle (int state, HatchStyle hatchStyle)
Parameters
92
state [in] The
state for which you would like to assign a hatch style.
hatchStyle [in] The
hatch style that will be used for the specified state.
Execution Result If the function succeeds the return value will be Success. If the state is out of range then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. See Also
IAlarmPen.GetHatchStyle [Method]
Calling Syntax This example assumes there is a valid AlarmPen object to be passed into the example methods. [VBA] Sub Example(alarmPen As Object) ‘Setting HatchStyle alarmPen.SetHatchStyle(0, 1) End Sub
[Cicode] FUNCTION Example(OBJECT hAlarmPen) // Setting HatchStyle _ObjectCallMethod(hAlarmPen, “SetHatchStyle” ,0, 1); END
IAnalogPen Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IAnalogPen
Methods (0) Properties (3) See Also
IAnalogPen.LineColor [Property][Get/Set]
IAnalogPen.LineColor [Property][Get/Set] IAnalogPen.LineInterpolation [Property][Get/Set] IAnalogPen.LineWidth [Property][Get/Set]
Gets or Sets the color that will be used to draw the pen line. Defined As
[VBA] Long LineColor
[Cicode] INT LineColor
93
[C++] OLE_COLOR LineColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * blue) + (256 * green) + (red) where red, green, and blue are 0-255. Calling Syntax This example assumes there is a valid AnalogPen object to be passed into the example methods. [VBA] Sub Example(analogPen As Object) Dim lineColor As Long ‘Getting Property value lineColor = analogPen.LineColor ‘Setting Property to red analogPen.LineColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hAnalogPen) // Getting property value INT nLineColor = _ObjectGetProperty(hAnalogPen, "LineColor"); // Setting property to red _ObjectSetProperty(hAnalogPen, "LineColor", 255); END
IAnalogPen.LineInterpol ation [Property][Get/ Set]
Gets or sets the drawing style used for drawing the connecting lines between points for this analog pen. Defined As
[VBA] Long LineInterpolation
[Cicode] INT LineInterpolation
[C++] LineType LineInterpolation
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The LineInterpolation mode dictates how the two points of a line are joined when drawn. If Stepped, there will be two lines joining each point, one horizontal and one vertical. If Straight, only one line is used to directly connect the two points.
94
See Also
LineType [Enumeration]
Calling Syntax This example assumes there is a valid Analog Pen object to be passed into the example methods. [VBA] Sub Example(analogPen As Object) Dim lineInterpolation As Long ‘Getting Property value lineInterpolation = analogPen.LineInterpolation ‘Setting Property value analogPen.LineInterpolation = 1 End Sub
[Cicode] FUNCTION Example(OBJECT hAnalogPen) // Getting property value INT nInterpolation = _ObjectGetProperty(hAnalogPen, "LineInterpolation"); // Setting property value _ObjectSetProperty(hAnalogPen, "LineInterpolation", 1); END
IAnalogPen.LineWidth [Property][Get/Set]
Gets or sets the width in pixels of the pen line when it is drawn. Defined As
[VBA] Long LineWidth
[Cicode] INT LineWidth
[C++] int LineWidth
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
Minimum = 0
Maximum = 8
Calling Syntax This example assumes there is a valid Analog Pen object to be passed into the example methods. [VBA] Sub Example(analogPen As Object) Dim lineWidth As Long ‘Getting Property value lineWidth = analogPen.LineWidth ‘Setting Property value analogPen.LineWidth = 5 End Sub
95
[Cicode] FUNCTION Example(OBJECT hAnalogPen) // Getting property value INT nLineWidth = _ObjectGetProperty(hAnalogPen, "LineWidth"); // Setting property value _ObjectSetProperty(hAnalogPen, "LineWidth", 5); END
ICommand Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] ICommand
Methods (0) Properties (6) ICommand.CommandId [Property][Get] ICommand.ButtonType [Property][Get] ICommand.Enabled [Property][Get/Set] ICommand.Pressed [Property][Get/Set] ICommand.Tooltip [Property][Get] ICommand.Privilege [Property][Get]
ICommand.CommandId [Property][Get]
Gets the CommandId of this command. Defined As
[VBA] String CommandId
[Cicode] STRING hCommandId
[C++] BSTR CommandId
Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1)). [VBA] Sub Example(Command As Object) Dim commandId As String ‘Getting Property value commandId = Command.CommandId End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value STRING nCommandId = _ObjectGetProperty(hCommand,"CommandID"); END
96
ICommand.ButtonType [Property][Get]
Gets this commands button type. Defined As
[VBA] Long ButtonType
[Cicode] INT ButtonType
[C++] ToolbarButtonType ButtonType
Execution Results If the property get succeeds, the return value will be Success. If the return value is invalid, the return value will be InvalidArgument. If the command has been deleted, the return value will be GeneralFailure. Remarks The return value meaning is as follows:
ToolbarButtonType_Push = 0
ToolbarButtonType_Toggle = 1
ToolbarButtonType_Separator = 2
Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem. (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1)) [VBA] Sub Example(Command As Object) Dim buttonType As Long ‘Getting Property value buttonType = Command.ButtonType End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value INT nButtonType = _ObjectGetProperty(hCommand, "ButtonType"); END
ICommand.Enabled [Property][Get/Set]
Gets this commands enabled state. Defined As
[VBA] Boolean Enabled
[Cicode] INT Enabled
[C++] VARIANT_BOOL Enabled
Execution Result If the property get succeeds, the return value will be Success. If the return value is invalid, the return value will be InvalidArgument. Limits
True (-1): Enabled
97
Falso (0): Disabled
Remarks The setting of this property is only valid for custom commands. Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem. (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1)) [VBA] Sub Example(Command As Object) Dim enabled As Boolean ‘Getting Property value enabled = Command.Enabled ‘Setting Property value Command.Enabled = True End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value INT nEnabled = _ObjectGetProperty(hCommand, "Enabled"); // Setting property value _ObjectSetProperty(hCommand, "Enabled", -1); END
ICommand.Pressed [Property][Get/Set]
Gets and Sets this command’s Pressed state. Defined As
[VBA] Boolean Pressed
[Cicode] INT Pressed
[C++] VARIANT_BOOL Pressed
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
True (-1): Pressed
False (0): UnPressed
Remarks This is only useful for toggle buttons, indicating whether or not the button is in a pressed down state. The setting of this property is only valid for custom commands. Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem. (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1))
98
[VBA] Sub Example(Command As Object) Dim pressed As Boolean ‘Getting Property value pressed = Command.Pressed ‘Setting Property value Command.Pressed = True End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value INT nPressed = _ObjectGetProperty(hCommand, "Pressed"); // Setting property value _ObjectSetProperty(hCommand, "Pressed", -1); END
ICommand.Tooltip [Property][Get]
Gets this commands Tooltip text. Defined As
[VBA] String Tooltip
[Cicode] STRING Tooltip
[C++] VARIANT_BOOL Tooltip
Execution Result If the property get succeeds, the return value will be Success. If the return variable is invalid, the return value will be InvalidArgument. If the command has been deleted, the return value will be GeneralFailure. Remarks This returns the text that is displayed in a tooltip window when the mouse pointer hovers over the command’s button. Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem. (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1)) [VBA] Sub Example(Command As Object) Dim tooltip As String ‘Getting Property value tooltip = Command.Tooltip End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value STRING sTooltip = _ObjectGetProperty(hCommand, "Tooltip"); END
99
ICommand.Privilege [Property][Get]
Gets the privilege required to gain access to this command. Defined As
[VBA] Integer Privilege
[Cicode] INT Privilege
[C++] int Privilege
Execution Result If the property get succeeds, the return value will be Success. If the return variable is invalid, the return value will be InvalidArgument. If the command has been deleted, the return value will be GeneralFailure. Remarks This is the required privilege level of the currently logged in Vijeo Citect user to enable the state of this command, and hence allow access through the user interface. If the currently logged in Vijeo Citect user doesn’t have this privilege, any buttons tied to this command will be disabled. Calling Syntax This example assumes there is a valid Command object as retrieved from a Process Analyst’s CommandSystem. (e.g., VBA: ProcessAnalyst.CommandSystem.Item(1)) [VBA] Sub Example(Command As Object) Dim privilege As Integer ‘Getting Property value privilege = Command.Privilege End Sub
[Cicode] FUNCTION Example(OBJECT hCommand) // Getting property value INT nPrivilege = _ObjectGetProperty(hCommand, "Privilege"); END
ICommandSystem Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] ICommandSystem
Methods (3) ICommandSystem.Create [Method] ICommandSystem.Execute [Method] ICommandSystem.Remove [Method]
Properties (4) ICommandSystem.Count [Property][Get] ICommandSystem.Item [Property][Get]
100
ICommandSystem._NewEnum [Property][Get] ICommandSystem.ItemById [Property][Get]
ICommandSystem.Cou nt [Property][Get]
Gets the number of commands in the command system. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem). [VBA] Function Example(CommandSystem As Object) Dim count As Long ‘Getting Property value count = CommandSystem.Count End Function
[Cicode] FUNCTION Example(OBJECT hCommandSystem) // Getting property value INT nCount = _ObjectGetProperty(hCommandSystem, "Count"); END
ICommandSystem.Item [Property][Get]
Gets the Command at a supplied index location in this collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, ICommand* Item)
Parameters index [in] Indicates
the index location of the command to return from this collection. (One based) Execution Result If the property get succeeds, the return value will be Success. If the index is out of range, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem).
101
[VBA] Sub Example(CommandSystem As Object) Dim command As Object ‘Getting Property value Set command = CommandSystem.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hCommandSystem) // Getting property value OBJECT hCommand = _ObjectCallMethod(hCommandSystem, "get_Item", 1); END
ICommandSystem._Ne wEnum [Property][Get]
This allows “For… Each… Next” integration in VB. Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem). This property is not applicable to Cicode. [VBA] Sub Example(CommandSystem As Object) Dim command As Object Dim count Object ‘Using Property For Each command In CommandSystem count = count + 1 Next command End Sub
ICommandSystem.Item ById [ Property][Get]
Gets the Command at a supplied index location in this collection. Defined As
[VBA] Object Command
[Cicode] OBJECT hCommand
[C++] ICommand* Command
Parameters commandId [in] Indicates
command ID of the command to return from this collection.
Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem). [VBA] Sub Example(CommandSystem As Object) Dim command As Object ‘Getting Property value Set command = CommandSystem.ItemById(Citect_Command_AddPen) End Sub
102
[Cicode] FUNCTION Example(OBJECT hCommandSystem) // Getting property value OBJECT hCommand = _ObjectCallMethod (hCommandSystem," get_ItemById", Citect_Command_AddPen); END
ICommandSystem.Crea te [Method]
Creates a new Command object that is added to the CommandSystem. Defined As
[VBA] object Create (commandID As String, buttonType As Integer, tooltip As String, iconPath As String, privilege As Integer)
[Cicode] OBJECT Create (STRING commandID, INT buttonType, STRING tooltip, STRING iconPath, INT Pprivilege)
[C++] HRESULT Create (BSTR commandID, ToolbarButtonType ButtonType, BSTR tooltip, BSTR iconPath, int privilege, ICommand** Val)
Parameters commandID
A unique identifier for this command (1-64 characters).
[in] buttonType [in] A
value representing a button type.
ToolbarButtonType_Push = 0
ToolbarButtonType_Toggle = 1
ToolbarButtonType_Separator = 2
tooltip [in] The text to be displayed as
a tooltip for this command (1-64 characters).
iconPath [in] The
path to an icon file that will be used as this command’s picture.
privilege [in] A privilege value required by the Vijeo Citect user to gain access to this
command (0-8). Execution Result If the method succeeds, the return value is Success. If an argument is invalid or out of range, the return value is InvalidArgument. If the command was not created, the return value is GeneralFailure. Remarks The commandID cannot begin with the prefix “Citect_”. Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem).
103
[VBA] Sub Example(CommandSystem As Object) Dim command As Object Set command = CommandSystem.Create(CommandIO, "Some tooltip text", "c:\someicon.ico", 5) End Sub
[Cicode] FUNCTION Example(OBJECT hCommandSystem) OBJECT hCommand = _ObjectCallMethod(hCommandSystem, "Create", CommandIO, "Some tooltip text", "c:\someicon.ico", 5); END
ICommandSystem.Exec ute [Method]
Executes the specified command’s action. Defined As
[VBA] Execute (commandId As String)
[Cicode] Execute (STRING commandId)
[C++] HRESULT Execute(BSTR commandId)
Parameters commandId [in] The
unique ID of the command whose action is to be executed.
Execution Result If this method succeeds, the retun value will be Success. If the command is invalid, the return value will be InvalidArgument. Remarks If the current Operator does not have the correct privilege, the command will not execute. Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem). [VBA] Sub Example(CommandSystem As Object) CommandSystem.Execute(Citect_Command_AddPen) End Sub
[Cicode] FUNCTION Example(OBJECT hCommandSystem) _ObjectCallMethod(hCommandSystem, "Execute", Citect_Command_AddPen); END
ICommandSystem.Rem ove [Method]
Removes the specified command. Defined As
[VBA] Remove (commandId As String)
[Cicode] Remove (STRING CommandId)
104
[C++] HRESULT Remove(BSTR CommandId)
Parameters commandId [in] The
ID of the command to be removed.
Calling Syntax This example assumes there is a valid CommandSystem object as retrieved from a Process Analyst. (e.g., VBA: ProcessAnalyst.CommandSystem). [VBA] Sub Example(CommandSystem As Object) CommandSystem.Remove(“MyCommand1”) End Sub
[Cicode] FUNCTION Example(OBJECT hCommandSystem) _ObjectCallMethod(hCommandSystem, "Remove", “MyCommand1”); END
ICursors Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] ICursors
Methods ICursors.Create [Method] ICursors.RemoveAll [Method]
Properties ICursors.Item [Property][Get] ICursors._NewEnum [Property][Get] ICursors.Count [Property][Get] ICursors.ItemByName [Property][Get]
ICursors.Create [Method]
Creates a new TrendCursor at the given location. Defined As
[VBA] Object Create(name As String, position As Integer)
[Cicode] OBJECT Create(STRING name, INT position)
[C++] HRESULT Create(BSTR name, int position, ITrendCursor** ppTrendCursor)
Parameters name [in] The
desired unique name of the new cursor. This must be between 1 and 250 characters.
105
position [in] The
initial position of the new cursor. This value is given as the number of pixels from the left of the Process Analyst graph view. Execution Result If the function succeeds, the return value will be Success. If the name is out of range, the return value will be InvalidArgument. If the name is not unique, the return value will be InvalidArgument. If an unexpected error occurs, the return value will be General Failure. Remarks The cursor name must be unique. Attempting to create a cursor with a name that is already in use will result in error and the new cursor will not be created. Calling Syntax [VBA] Sub Example(cursors As Object) Dim newCursor As Object newCursor = cursors.Create(“Cursor1”, 100) End Sub
[Cicode] FUNCTION Example(OBJECT hCursors) OBJECT hNewCursor = _ObjectCallMethod(hCursors, “Create”, “Cursor1”, 100); END
ICursors.RemoveAll [Method]
Removes all cursors from the collection. Defined As
[VBA] RemoveAll()
[Cicode] RemoveAll()
[C++] HRESULT RemoveAll()
Execution Result If the function succeeds the return value will be Success. If an unexpected error occurs, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Cursors object to be passed into the example methods. [VBA] Sub Example(cursors As Object) cursors.RemoveAll End Sub
[Cicode] FUNCTION Example(OBJECT hCursors) _ObjectCallMethod(hCursors, "RemoveAll"); End Sub
106
ICursors.Item [Property][Get]
Retrieves the Cursor from the collection at the specified index. Defined As
[VBA] Object Item(index As Integer)
[Cicode] OBJECT get_Item(INT index)
[C++] HRESULT get_Item (long index, ITrendCursor **cursor)
Parameters index [in] The index of
the required cursor.
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the index is out of range, the return value will be InvalidArgument. If the collection is deleted, the return value will be GeneralFailure. Remarks The index for the collection is 1 based. The valid range for this parameter is between 1 and the total number of cursors. Calling Syntax This example assumes you have a valid reference to the cursors collection and that there are two items in the collection. [VBA] Sub Example(hCursors As Object) Dim hSecondCursor As Object Set hSecondCursor = hCursors.Item(2) End Sub
[Cicode] Sub Example(OBJECT hCursors) OBJECT hSecondCursor = _ObjectCallMethod(hCursors, "get_Item", 2); END
ICursors._NewEnum [Property][Get]
Retrieves an enumerator for the cursors collection. Defined As
[VBA] Object _NewEnum()
[C++] HRESULT get__NewEnum(LPUNKNOWN *pVal)
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the collection is deleted, the return value will be GeneralFailure. Remarks Provided for the implementation of For Each...Next loops in Citect VBA (See Calling Syntax, below). This property cannot be used in Cicode.
107
Calling Syntax This example assumes you have a valid reference to the cursors collection and that there are cursors in the collection. [VBA] Sub Example(cursors As Object) Dim cursor As Object Dim count As Integer = 0 For Each cursor In cursors Set count = count + 1 Next End Sub
ICursors.Count [Property][Get]
Returns the number of cursors in the collection. Defined As
[VBA] Integer Count()
[Cicode] INT Count()
[C++] HRESULT get_Count (long *pCount)
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the collection is deleted the return value will be GeneralFailure. Remarks This property may be used in conjunction with the Item property to iterate through the collection in Cicode. Calling Syntax This example assumes you have a valid reference to the cursors collection. [VBA] Sub Example(cursors As Object) Dim cursorCount As Integer cursorCount = cursors.Count End Sub
[Cicode] FUNCTION Example(OBJECT hCursors) INT cursorCount; cursorCount = _ObjectGetProperty(hCursors, "Count"); END
ICursors.ItemByName [Property][Get]
Retrieves the Cursor at the specified index. Defined As
[VBA] Object ItemByName(name As String)
[Cicode] OBJECT get_ItemByName(STRING name)
[C++] HRESULT get_ItemByName (BSTR name, ITrendCursor **cursor)
108
Parameters name [in] The name of the
required cursor.
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the cursor is not found, the return value will be InvalidArgument. If the collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes you have a valid reference to the cursors collection, and that there is a cursor in the collection named “MyCursor”. [VBA] Sub Example(cursors As Object) Dim cursor As Object Set cursor = cursors.ItemByName("MyCursor") End Sub
[Cicode] FUNCTION Example(OBJECT hCursors) OBJECT hCursor = _ObjectCallMethod(hCursors, "get_ItemByName", "MyCursor"); END
IDigitalPen Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IDigitalPen
Methods (0) Properties (4) IDigitalPen.FillColor [Property][Get/Set] IDigitalPen.LineColor [Property][Get/Set] IDigitalPen.LineWidth [Property][Get/Set] IDigitalPen.Fill [Property][Get/Set]
IDigitalPen.FillColor [Property][Get/Set]
Gets or Sets the color that will be used to fill the area under the line when the value is 1. Defined As
[VBA] Long FillColor
[Cicode] INT FillColor
[C++] OLE_COLOR FillColor
Execution Result
109
If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * blue) + (256 * green) + (red) where red, green, and blue are 0-255. The area under the line is filled with this color if the value of the Fill property is True (-1). See Also
IDigitalPen.Fill [Property][Get/Set]
Calling Syntax This example assumes there is a valid DigitalPen object to be passed into the example methods. [VBA] Sub Example(digitalPen As Object) Dim fillColor As Long ‘Getting Property value fillColor = digitalPen.FillColor ‘Setting Property to red digitalPen.FillColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hDigitalPen) // Getting property value INT nFillColor = _ObjectGetProperty(hDigitalPen, "FillColor"); // Setting property to red _ObjectSetProperty(hDigitalPen, "FillColor", 255); END
IDigitalPen.LineColor [Property][Get/Set]
Gets or Sets the color that will be used to draw the pen line. Defined As
[VBA] Long LineColor
[Cicode] INT LineColor
[C++] OLE_COLOR LineColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. Calling Syntax
110
This example assumes there is a valid DigitalPen object to be passed into the example methods. [VBA] Sub Example(digitalPen As Object) Dim lineColor As Long ‘Getting Property value lineColor = DigitalPen.LineColor ‘Setting Property to red digitalPen.LineColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hDigitalPen) // Getting property value INT nLineColor = _ObjectGetProperty(hDigitalPen, "LineColor"); // Setting property to red _ObjectSetProperty(hDigitalPen, "LineColor", 255); END
IDigitalPen.LineWidth [Property][Get/Set]
Gets or sets the width in pixels of the pen line when it is drawn. Defined As
[VBA] Long LineWidth
[Cicode] INT LineWidth
[C++] int LineWidth
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Limits
Minimum = 0
Maximum = 8
Calling Syntax This example assumes there is a valid Digital Pen object to be passed into the example methods. [VBA] Sub Example(digitalPen As Object) Dim lineWidth As Long ‘Getting Property value lineWidth = digitalPen.LineWidth ‘Setting Property value digitalPen.LineWidth = 5 End Sub
[Cicode] FUNCTION Example(OBJECT hDigitalPen) // Getting property value INT nLineWidth = _ObjectGetProperty(hDigitalPen, "LineWidth");
111
// Setting property value _ObjectSetProperty(hDigitalPen, "LineWidth", 5); END
IDigitalPen.Fill [Property][Get/Set]
Gets or sets whether the pen fill is displayed. Defined As
[VBA] Boolean Fill
[Cicode] INT Fill
[C++] VARIANT_BOOL Fill
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted the return value will be GeneralFailure. Remarks If the pen is filled, the area under the pen line will be filled with the color specified by the FillColor property. See Also
IDigitalPen.FillColor [Property][Get/Set]
Limits
True (-1): = Fill is displayed
False (0): = Fill is hidden
Calling Syntax This example assumes there is a valid digital pen object to be passed into the example methods. [VBA] Sub Example(digitalPen As Object) Dim fill As Boolean ‘Getting Property value fill = digitalPen.Fill ‘Setting Property value digitalPen.Fill = True End Sub
[Cicode] FUNCTION Example(OBJECT hDigitalPen) // Getting property value INT nFill = _ObjectGetProperty(hDigitalPen, "Fill"); // Setting property value _ObjectSetProperty(hDigitalPen, "Fill", -1); END
IObjectView Interface Defined As
[VBA] Object
112
[Cicode] OBJECT
[C++] IObjectView
Methods (0) Properties (7) IObjectView.Visible [Property][Get/Set] IObjectView.Height [Property][Get/Set] IObjectView.BackgroundColor [Property][Get/Set] IObjectView.ForeColor [Property][Get/Set] IObjectView.Columns [Property][Get] IObjectView.Items [Property][Get] IObjectView.SelectedItem [Property][Get]
IObjectView.Visible [Property][Get/Set]
Gets or Sets the visibility of the Object View window. Defined As
[VBA] Boolean Visible
[Cicode] INT Visible
[C++] VARIANT_BOOL Visible
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
True (-1): Visible
False (0): Hidden
Remarks By hiding the ObjectView, the chart gains the real estate previously held by it, and likewise the chart loses real estate when the ObjectView gets shown. Calling Syntax Assume that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim visible As Boolean ‘Getting Property value visible = objectView.Visible ‘Setting Property value objectView.Visible = False End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) INT bVisible = 0 // Getting property value bVisible = _ObjectGetProperty(hObjectView, "Visible");
113
// Setting Property to false _ObjectSetProperty(hObjectView, "Visible", 0); END
IObjectView.Height [Property][Get/Set]
Gets or Sets the height in pixels of the Object View window. Defined As
[VBA] Long Height
[Cicode] INT Height
[C++] int Height
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. A height value less than 0 will be InvalidArgument. Limits
Height must be 0 or greater.
Remarks As the ObjectView and chart both share the same window, by enlarging the ObjectView, you make the Chart smaller and vice versa. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim height As Long ‘Getting Property value height = objectView.Height ‘Setting Property value objectView.Height = 25 End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) INT nHeight = 0; // Getting property value nHeight = _ObjectGetProperty(hObjectView, "Height"); // Setting Property to false _ObjectSetProperty(hObjectView, "Height", 25); END
IObjectView.Backgroun dColor [Property][Get/ Set]
Gets or Sets the background color of the ObjectView. This number is treated as an OLE_COLOR inside the Process Analyst. Defined As
[VBA] Long BackgroundColor
[Cicode] INT BackgroundColor
114
[C++] OLE_COLOR BackgroundColor
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim backgroundColor As Long ‘Getting Property value backgroundColor = objectView.BackgroundColor ‘Setting Property value to red objectView.BackgroundColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) // Getting property value INT nBackgroundColor = _ObjectGetProperty(hObjectView,"BackgroundColor"); // Setting Property to Red _ObjectSetProperty(hObjectView, "BackgroundColor", 255); END
IObjectView.ForeColor [Property][Get/Set]
Gets or Sets the Fore color (text and color box outlines) of the ObjectView. This number is treated as an OLE_COLOR inside the Process Analyst. Defined As
[VBA] Long ForeColor
[Cicode] INT ForeColor
[C++] OLE_COLOR ForeColor
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter.
115
[VBA] Sub Example(objectView As Object) Dim foreColor As Long ‘Getting Property value foreColor = objectView.ForeColor ‘Setting Property value to red objectView.ForeColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) INT nForeColor = 0; // Getting property value nForeColor = _ObjectGetProperty(hObjectView, "ForeColor"); // Setting Property to red _ObjectSetProperty(hObjectView, "ForeColor", 255); END
IObjectView.Columns [Property][Get]
Gets the automation object representing the collection of columns currently visible in the ObjectView. Defined As
[VBA] Object Columns
[Cicode] OBJECT Columns
[C++] IObjectViewColumns* Columns
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim columns As Object ‘Getting Property value Set columns = objectView.Columns End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) // Getting property value OBJECT hColumns = _ObjectGetProperty(hObjectView, "Columns"); END
IObjectView.Items [Property][Get]
Gets the automation object representing the collection of items at the root of the ObjectView tree. Defined As
[VBA] Object Items
116
[Cicode] OBJECT Items
[C++] IObjectViewItems* Items
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The method will provide a list of all the pane items in tree. Each pane item has an Items property which allows access to the pen items listed under it. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim items As Object ‘Getting Property value Set items = objectView.Items End Sub
[Cicode] FUNCTION Example(OBJECT hObjectView) // Getting property value OBJECT hItems = _ObjectGetProperty(hObjectView, "Items"); END
IObjectView.SelectedIte m [ Property][Get]
Gets the current primary selection in the ObjectView. This is the pen item that was last selected. Defined As
[VBA] Object SelectedItem
[Cicode] OBJECT SelectedItem
[C++] IObjectViewItem* SelectedItem
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes that there is an IObjectView object being passed in as a parameter. [VBA] Sub Example(objectView As Object) Dim selectedItem As Object ‘Getting Property value Set selectedItem = objectView.SelectedItem End Sub
117
[Cicode] FUNCTION Example(OBJECT hObjectView) // Getting property value OBJECT hSelectedItem = _ObjectGetProperty(hObjectView, "SelectedItem"); END
IObjectViewColumn Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IObjectViewColumn
Methods (0) Properties (3) IObjectViewColumn.Name [Property][Get] IObjectViewColumn.Text [Property][Get] IObjectViewColumn.Width [Property][Get/Set]
IObjectViewColumn.Na me [Property][Get]
Retrieves the unique identifier of this column. Defined As
[VBA] String Name
[Cicode] STRING Name
[C++] BSTR Name
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid column as retrieved from an ObjectView. (e.g., VBA: objectView.Columns.Item(1)). [VBA] Sub Example(objectViewColumn As Object) Dim name As String ‘Getting Property value name = objectViewColumn.Name End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewColumn) // Getting property value STRING name = _ObjectGetProperty(hObjectViewColumn, "Name"); END
IObjectViewColumn.Tex t [Property][Get]
Gets the Text that is being displayed for this columns header. Defined As
118
[VBA] String Text
[Cicode] STRING Text
[C++] BSTR Text
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid column as retrieved from an ObjectView. (e.g., VBA: objectView.Columns.Item(1)). [VBA] Sub Example(objectViewColumn As Object) Dim text As String ‘Getting Property value text = objectViewColumn.Text End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewColumn) // Getting property value STRING text = _ObjectGetProperty(hObjectViewColumn, "Text"); END
IObjectViewColumn.Wid th [Property][Get/Set]
Gets or Sets the width in pixels of this column. Defined As
[VBA] Long Width
[Cicode] INT Width
[C++] int Width
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the width is out of range, the result will be InvalidArgument. Limits A valid width is 0-1000. Calling Syntax This example assumes there is a valid column as retrieved from an ObjectView. (e.g., VBA: objectView.Columns.Item(1)). [VBA] Sub Example(objectViewColumn As Object) Dim width As Long ‘Getting Property value width = objectViewColumn.Width
119
‘Setting Property value objectViewColumn.Width = 150 End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewColumn) // Getting property value INT width = _ObjectGetProperty(hObjectViewColumn, "Width"); _ObjectSetProperty(hObjectViewColumn, "Width", 150); END
IObjectViewColumns Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IObjectViewColumns
Methods (4) IObjectViewColumns.Add [Method] IObjectViewColumns.Hide [Method] IObjectViewColumns.Remove [Method] IObjectViewColumns.Show [Method]
Properties (4) IObjectViewColumns.Count [Property][Get] IObjectViewColumns.Item [Property][Get] IObjectViewColumns.ItemByName [Property][Get] IObjectViewColumns._NewEnum [Property][Get]
IObjectViewColumns.A dd [Method]
Adds a visible custom column to the ObjectView. Defined As
[VBA] Add(name As String, DisplayText As String, Width As Long)
[Cicode] Add(STRING name, STRING DisplayText, INT Width)
[C++] HRESULT Add (BSTR name, BSTR text, int width)
Parameters name [in] The
string ID uniquely identifying this column (1-64).
text [in] The
title to be displayed in the column header (0-256).
width [in] The
width of this column in pixels (0-1000).
Execution Result If the method succeeds, the return value will be Success. If an argument is out of range, the return value will be InvalidArgument. If the column cannot be added, the return value is GeneralFailure.
120
See Also
OVColumnAdded [Event]
Calling Syntax This example assumes there is a valid Columns collection as retrieved from an ObjectView. (e.g., VBA: objectView.Columns). [VBA] Sub Example(Columns As Object) Columns.Add "NameID", "New Column", 120; End Sub
[Cicode] FUNCTION Example(OBJECT hColumns) _ObjectCallMethod(hColumns, "Add", "NameID", "New Column", 120); END
IObjectViewColumns.Hi de [Method]
Makes the specified column hidden within the Object View. Defined As
[VBA] Hide(columnName As String)
[Cicode] Hide(STRING columnName)
[C++] HRESULT Hide(BSTR columnName)
Parameters columnName [in] The
string ID uniquely identifying the column you want to hide
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the field cannot be set, GeneralFailure is returned. See Also
IObjectViewColumns.Show [Method] Calling Syntax This example assumes there is a columns Collection from an ObjectView. (e.g., VBA: objectView.Columns). [VBA] Sub Example(columns As Object) columns.Hide "Error" End Sub
[Cicode] FUNCTION Example(OBJECT hColumns) _ObjectCallMethod(hColumns, "Hide", "Error"); END
IObjectViewColumns.Re move [Method]
Removes the specified custom column from the Object View columns. Defined As
[VBA] Remove(columnName As String)
121
[Cicode] OBJECT Remove(STRING columnName)
[C++] Remove(STRING columnName)
Parameters columnName
[in] Indicates the unique name of the column to remove from this collection. Execution Results If the method succeeds, the return value will be Success. If the column cannot be found, the return value will be InvalidArgument. Remarks Only user created custom columns can be removed. Calling Syntax This example assumes there is a valid Columns collection object to be passed into the example methods. [VBA] Sub Example(columns As Object) Dim column As Object ‘Getting Property value Set column = columns.Remove(“MyCustomColumn”) End Sub
[Cicode] FUNCTION Example(OBJECT hColumns) // Getting property value OBJECT hColumn = _ObjectCallMethod(hColumns, "get_ItemByName", "MyCustomColumn"); END
IObjectViewColumns.Sh ow [ Method]
Makes the specified column visible within the Object View. Defined As
[VBA] Show(columnName As String)
[Cicode] Show(STRING columnName)
[C++] HRESULT Show(BSTR columnName)
Parameters columnName [in] The
string ID uniquely identifying the column you want to make
visible Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the field cannot be set, then GeneralFailure is returned. See Also
IObjectViewColumns.Hide [Method] Calling Syntax
122
This example assumes there is a columns Collection from an ObjectView. (e.g., VBA: objectView.Columns). [VBA] Sub Example(columns As Object) columns.Show "Error" End Sub
[Cicode] FUNCTION Example(OBJECT hColumns) _ObjectCallMethod(hColumns, "Show", "Error"); END
IObjectViewColumns.C ount [Property][Get]
Gets the number of Columns in this columns collection. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid Columns collection as retrieved from an ObjectView. (e.g., VBA: ObjectView.Columns). [VBA] Function Example(Columns As Object) Dim count As Long ‘Getting Property value count = Columns.Count End Function
[Cicode] FUNCTION Example(OBJECT hColumns) // Getting property value INT nCount = _ObjectGetProperty(hColumns, "Count"); END
IObjectViewColumns.Ite m [ Property][Get]
Gets the ObjectViewItem at a supplied index location in this collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IObjectViewColumn* Item)
Parameters index
123
[in] Indicates
the index location of the column to return from this collection. (One based) Calling Syntax This example assumes there is a valid Columns collection as retrieved from an ObjectView (e.g., VBA: objectView.Columns). [VBA] Sub Example(Columns As Object) Dim column As Object ‘Getting Property value Set column = Columns.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hColumns) // Getting property value OBJECT hColumn = _ObjectCallMethod(hColumns, "get_Item", 1); END
IObjectViewColumns.Ite mByName [Property][Get]
Returns a reference to the column object with the given name from this column’s collection. Defined As
[VBA] ItemByName(columnName As String) as Object
[Cicode] OBJECT ItemByName(STRING columnName)
[C++] ItemByName(STRING columnName, IObjectViewColumn* Item)
Parameters columnName [in] Indicates
the unique name of the column item to return from this
collection. Execution Results If the method succeeds, the return value will be Success. If the column cannot be found, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid Columns collection object to be passed into the example methods. [VBA] Sub Example(columns As Object) Dim column As Object ‘Getting Property value Set column = columns.ItemByName(“Duration”) End Sub
124
[Cicode] FUNCTION Example(OBJECT hColumns) // Getting property value OBJECT hColumn = _ObjectCallMethod(hColumns, "get_ItemByName", "Duration"); END
IObjectViewColumns._N ewEnum [Property][Get]
This allows “For… Each… Next” integration in VB. Calling Syntax This example assumes there is a valid Columns collection as retrieved from an ObjectView. (e.g., VBA: objectView.Columns). This property is not applicable in Cicode. [VBA] Sub Example(Columns As Object) Dim column As Object Dim count Object ‘Using Property For Each column In Columns count = count + 1 Next column End Sub
IObjectViewItem Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IObjectViewItem
Methods (2) IObjectViewItem.GetField [Method] IObjectViewItem.PutField [Method]
Properties (3) IObjectViewItem.Expanded [Property][Get/Set] IObjectViewItem.Tag [Property][Get/Set] IObjectViewItem.Items [Property][Get]
IObjectViewItem.GetFiel d [Method]
Returns the string value of a displayed field for a specified column on this item. The IObjectViewItem interface is hierarchical to two levels – pane and then pen. The result of the GetField method will depend on what type of item it is called on. To access the fields for a pen, for example, you have to first get the items collection for the pane item, then get the pen item. Defined As
[VBA] GetField(ColumnName As String) as String
[Cicode] STRING GetField (STRING ColumnName)
[C++] HRESULT GetField (BSTR ColumnName, BSTR *Val)
125
Parameters ColumnName [in] The
string ID uniquely identifying the column whose field value is being queried for. Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the ColumnName does not exist, InvalidArgument will be returned. Calling Syntax This example gets the Scale property of the first pen in the first pane. It assumes there is a valid Item as retrieved from an Items Collection from an ObjectView. (e.g., VBA: objectView.Items.Item(1)) [VBA] Sub Example() Dim paneItem As Object Dim penItem As Object Dim fieldValue As String Set paneItem = Test_CPA.ObjectView.Items.Item(1) 'Get the first pane of the ObjectView Set penItem = paneItem.Items.Item(1) 'Get the first pen from the first pane penItem.GetField "Scale", fieldValue 'Get the value of the scale field End Sub
[CICODE] FUNCTION Example(OBJECT hObjectView) OBJECT hPaneItems = _ObjectGetProperty(hObjectView, "Items"); OBJECT hPaneItem = _ObjectCallMethod(hPaneItems, "get_Item", 1); // Get the first pane of the ObjectView OBJECT hPenItems = _ObjectGetProperty(hPaneItem, "Items"); // Get the collection of pens from the first pane OBJECT hPenItem = _ObjectCallMethod(hPenItems, "get_Item", 1); // Get the first Pen item STRING sValue; _ObjectCallMethod(hPenItem, "GetField", "Scale", sValue); // Get the value of the scale field END
IObjectViewItem.PutFiel d [Method]
Sets the display string in a field’s cell for a specified column on this item. The IObjectViewItem interface is hierarchical to two levels – pane and then pen. The scope of the PutField method will depend on what type of item it is called on. To set fields for a pen, for example, you have to first get the items collection for the pane item, then get the pen item. Defined As
[VBA] PutField(columnName As String, fieldValue as String)
[Cicode] PutField (STRING columnName, STRING fieldValue)
[C++] HRESULT PutField (BSTR columnName, BSTR fieldValue)
Parameters
126
columnName [in] The
string ID uniquely identifying the column whose field value is
being set. fieldValue [in] The
string you would like to be displayed in the field for this column/ pen intersection. Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the field cannot be set, then GeneralFailure is returned. Calling Syntax This example writes the value “someValue” to the CustomColumn field of the first pen in the first pane. It assumes there is a valid Item as retrieved from an Items Collection from an ObjectView. (e.g., VBA: objectView.Items.Item(1)). [VBA] Sub Example() Dim paneItem As Object Dim penItem As Object Set paneItem = Test_CPA.ObjectView.Items.Item(1) 'Get the first pane of the ObjectView Set penItem = paneItem.Items.Item(1) 'Get the first pen from the first pane penItem.PutField "CustomColumn", "someValue" 'Set the value of the CustomColumn field End Sub
[CICODE] FUNCTION Example(OBJECT hObjectView) OBJECT hPaneItems = _ObjectGetProperty(hObjectView, "Items"); OBJECT hPaneItem = _ObjectCallMethod(hPaneItems, "get_Item", 1); // Get the first pane of the ObjectView OBJECT hPenItems = _ObjectGetProperty(hPaneItem, "Items"); // Get the collection of pens from the first pane OBJECT hPenItem = _ObjectCallMethod(hPenItems, "get_Item", 1); // Get the first Pen item _ObjectCallMethod(hPenItem, "PutField", "CustomColumn", "someValue"); // Set the value of the CustomColumn field END
IObjectViewItem.Expan ded [Property][Get/Set]
Gets or Sets the expanded state of an item in the ObjectView. This change is reflected immediately in the visualization of the ObjectView. Defined As
[VBA] Boolean Expanded
[Cicode] INT Expanded
[C++] VARIANT_BOOL Expanded
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
127
True (-1): Expanded
False (0): Collapsed
Calling Syntax This example assumes there is a valid Item as retrieved from an Items Collection from an ObjectView. (e.g., VBA: objectView.Items.Item(1)). [VBA] Sub Example(objectViewItem As Object) Dim expanded As Boolean ‘Getting Property value expanded = objectViewItem.Expanded ‘Setting Property value objectViewItem.Expanded = False End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewItem) // Getting property value INT nExpanded = _ObjectGetProperty(hObjectViewItem, "Expanded"); // Setting Property _ObjectSetProperty(hObjectViewItem, "Expanded", 0); END
IObjectViewItem.Tag [Property][Get/Set]
Gets or Sets a user specified piece of data to associate with this Item. Defined As
[VBA] Tag
[Cicode] Tag
[C++] VARIANT Tag
Remarks The user can associate any variant of data with a pen. This is handy for associating some custom data with a pen item, and then having direct access to it whenever any events with a pen item target occur. Calling Syntax This example assumes there is a valid Item as retrieved from an Items Collection from an ObjectView. (e.g., VBA: objectView.Items.Item(1)). [VBA] Sub Example(objectViewItem As Object) Dim tag As Variant ‘Getting Property value tag = objectViewItem.Tag ‘Setting Property value to red objectViewItem.Tag = tag End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewItem) // Getting property value INT nTag = _ObjectGetProperty(hObjectViewItem, "Tag");
128
// Setting Property to red _ObjectSetProperty(hObjectView, "Tag", nTag); END
IObjectViewItem.Items [Property][Get]
Gets the automation object representing the collection of child items under this item. Defined As
[VBA] Object Items
[Cicode] OBJECT Items
[C++] IObjectViewItems* Items
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks Pane nodes are currently the only nodes that can have children. Calling Syntax This example assumes there is a valid item as retrieved from an ObjectView. (e.g., VBA: objectView.Items.Item(1). This will be a pane). [VBA] Sub Example(objectViewItem As Object) Dim items As Object ‘Getting Property value Set items = objectViewItem.Items End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewItem) // Getting property value OBJECT hItems = _ObjectGetProperty(hObjectViewItem, "Items"); END
IObjectViewItems Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IObjectViewItems
Methods (0) Properties (3) IObjectViewItems.Count [Property][Get] IObjectViewItems.Item [Property][Get] IObjectViewItems._NewEnum [Property][Get]
129
IObjectViewItems.Count [Property][Get]
Gets the number of child items under this item. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid Items collection as retrieved from an ObjectView. (e.g., VBA: objectView.Items) [VBA] Sub Example(Items As Object) Dim count As Long ‘Getting Property value count = Items.Count End Sub
[Cicode] FUNCTION Example(OBJECT hItems) // Getting property value INT nCount = _ObjectGetProperty(hItems, "Count"); END
IObjectViewItems.Item [Property][Get]
Gets the ObjectViewItem at a supplied index location in this collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IObjectViewItem* Item)
Parameters index [in] Indicates
the index location of the child item to return from this collection. (One based) Calling Syntax This example assumes there is a valid Items collection as retrieved from an ObjectView. (e.g., VBA: objectView.Items). [VBA] Sub Example(Items As Object) Dim item As Object ‘Getting Property value Set item = Items.Item(1) End Sub
130
[Cicode] FUNCTION Example(OBJECT hItems) // Getting property value OBJECT hItem = _ObjectCallMethod(hItems, "get_Item", 1); END
IObjectViewItems._New Enum [ Property][Get]
This allows For.. Each.. Next integration in VB. Calling Syntax This example assumes there is a valid Items collection as retrieved from an ObjectView. (e.g., VBA: objectView.Items). This property is not applicable to Cicode. [VBA] Sub Example(Items As Object) Dim item As Object Dim count Object ‘Using Property For Each item In Items count = count + 1 Next Item End Sub
IObjectViewPenItem Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IObjectViewPenItem
Methods (0) Properties (3) IObjectViewPenItem.BlockColor [Property][Get]) IObjectViewPenItem.Checked [Property][Get/Set] IObjectViewPenItem.Selected [Property][Get]
IObjectViewPenItem.Blo ckColor [Property][Get]
Gets the color representing this item in the ObjectView. Defined As
[VBA] Long BlockColor
[Cicode] INT BlockColor
[C++] OLE_COLOR BlockColor
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red) where red, green, and blue are 0-255.
131
Calling Syntax This example assumes there is a valid pen item as retrieved from an ObjectView. (e.g., VBA: ObjectView.Items.Item(1).Items.Item(1) This will be a pen). [VBA] Sub Example(objectViewPenItem As Object) Dim blockColor As Long ‘Getting Property value blockColor = objectViewPenItem.BlockColor End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewPenItem) // Getting property value INT blockColor = _ObjectGetProperty(hObjectViewItem, "BlockColor"); END
IObjectViewPenItem.Ch ecked [Property][Get/ Set]
Gets or Sets whether or not this pen item is checked. Defined As
[VBA] Boolean Checked
[Cicode] INT Checked
[C++] VARIANT_BOOL Checked
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
True (-1): Checked
False (0): Unchecked
Remarks This reflects the pens visibility property directly, and any sets to this property will reflect immediately in the update of the Process Analyst display. See Also
OVItemChecked [Event]
Calling Syntax This example assumes there is a valid pen item as retrieved from an ObjectView. (e.g., VBA: objectView.Items.Item(1).Items.Item(1) This will be a pen). [VBA] Sub Example(objectViewPenItem As Object) Dim checked As Boolean ‘Getting Property value checked = objectViewPenItem.Checked ‘Setting Property value objectViewPenItem.Checked = False End Sub
132
[Cicode] FUNCTION Example(OBJECT hObjectViewPenItem) // Getting property value INT checked = _ObjectGetProperty(hObjectViewItem, "Checked"); // Setting property value _ObjectSetProperty(hObjectViewItem, "Checked", 0); END
IObjectViewPenItem.Sel ected [Property][Get]
Gets whether or not this pen is the selected pen in its pane. Defined As
[VBA] Boolean Selected
[Cicode] INT Selected
[C++] VARIANT_BOOL Selected
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
True (-1): Selected
False (0): Unselected
Remarks Each Pane has one selected pen. It is visually emphasized by a vertical gradient fill. Calling Syntax This example assumes there is a valid pen item as retrieved from an ObjectView. (e.g., VBA: objectView.Items.Item(1).Items.Item(1) This will be a pen). [VBA] Sub Example(objectViewPenItem As Object) Dim selected As Boolean ‘Getting Property value selected = objectViewPenItem.Selected End Sub
[Cicode] FUNCTION Example(OBJECT hObjectViewPenItem) // Getting property value INT selected = _ObjectGetProperty(hObjectViewItem, "Selected"); END
IPane Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IPanes
133
Methods (1) IPane.Delete [Method]
Properties (6) IPane.Height [Property][Get/Set] IPane.Collection [Property][Get] IPane.Name [Property][Get/Set] IPane.BackgroundColor [Property][Get/Set] IPane.FixedHeight [Property][Get/Set] IPane.Pens [Property][Get]
IPane.Delete [Method]
Removes this Pane from the collection and the display. Defined As
[VBA] Delete()
[Cicode] Delete()
[C++] HRESULT Delete()
Execution Result If the method succeeds, the return value will be Success. If the pane is already deleted, the return value will be GeneralFailure. Remarks Any pen associated with the pane will also be deleted. Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods. [VBA] Sub Panes(Pane As Object) Pane.Delete() End Sub
[Cicode] FUNCTION Example(OBJECT hPane) _ObjectCallMethod(hPane, “Delete”); END
IPane.Height [Property][Get/Set]
Gets or Sets the height of this pane. Defined As
[VBA] Long Height
[Cicode] INT Height
[C++] int Height
Execution Result If the property get/set succeeds, the return value will be Success. If the height is out of range (16-1000), the return value will be InvalidArgument. If the pane is deleted, the return value will be GeneralFailure.
134
Remarks This property affects the visible height of the Pane in two different ways based on the Boolean value of the FixedHeight property. property. If the FixedHeight property is True, the Pane takes on a pixel height equivalent to the Height property value. All pens inside the Pane are adjusted to fit. f it. If the FixedHeight property is False, the Height property value is used as a ratio of the available ‘Variable’ ‘Variable’ real estate (all the left over room in the Process Analyst after Fixed Height panes have been added) which is shared out between all the Variable Height panes. See Also
IPane.FixedHeight [Property][Get/Set]
Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods. [VBA] Sub Example(Pane As Object) Dim height As Long ‘Getting Property value height = Pane.Height ‘Setting Property value Pane.Height = 250 End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value INT nHeight = _ObjectGetProperty(hPane, "Height"); // Setting property value _ObjectSetProperty(hPane, "Height", 250); END
IPane.Collection [Property][Get]
Returns a reference to the Panes collection that this Pane belongs to. Defined As
[VBA] Object Collection
[Cicode] OBJECT Collection
[C++] IPanes* Collection
Execution Result If the property get succeeds the return value will be Success. If the pane is deleted the return value will be GeneralFailure. General Failure. See Also
IPanes Interface
Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods.
135
[VBA] Sub Example(pane As Object) Dim panes As Object ‘Getting Property value Set panes = pane.Collection End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value OBJECT hPanes = _ObjectGetProperty(hPane, "Collection"); END
IPane.Name [Property][Get/Set]
Gets or Sets the name of this pane. Defined As
[VBA] String Name
[Cicode] STRING Name
[C++] BSTR Name
Execution Result If the property get/set succeeds, the return value will be Success. If a pane of the same name exists, the return value will be InvalidArgument. If the panes collection is deleted, the return value will be GeneralFailure. Limits Name must be between 1-250 characters. Remarks Pane names must be unique. Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods. [VBA] Sub Example(pane As Object) Dim name As String ‘Getting Property value name = pane.Name ‘Setting Property value pane.Name = "Alarms" End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value STRING sName = _ObjectGetProperty(hPane, "Name"); // Setting property value _ObjectSetProperty(hPane, "Name", "Alarms"); END
136
IPane.BackgroundColor [Property][Get/Set]
Gets or Sets the color of this Pane. Defined As
[VBA] Long BackgroundColor
[Cicode] INT BackgroundColor
[C++] OLE_COLOR BackgroundColor
Execution Result If the property get/set succeeds, the return value will be Success. If the pane is deleted, the return value will be GeneralFailure. Remarks The color value can be calculated using the following formula: color = (65536 * Blue) + (256 * Green) + (Red). Where red, green and blue are 0-255. Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods. [VBA] Sub Example(Pane As Object) Dim backgroundColor As Long ‘Getting Property value backgroundColor = Pane.BackgroundColor ‘Setting Property value to red Pane.BackgroundColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value INT nColor = _ObjectGetProperty(hPane, "BackgroundColor"); // Setting property value _ObjectSetProperty(hPane, "Name", 255); END
IPane.FixedHeight [Property][Get/Set]
Gets or Sets whether this pane has a fixed height. Defined As
[VBA] Boolean FixedHeight
[Cicode] INT FixedHeight
[C++] VARIANT_BOOL FixedHeight
Execution Result If the property get/set succeeds, the return value will be Success. If the pane is deleted, the return value will be GeneralFailure. Limits
True (-1): Height is fixed
False (0): Height is variable
137
Remarks When this property is true, the pane’s Height reflects the pixel value size as gotten from the Pane’s Pane’s Height property. property. If the FixedHeight F ixedHeight property is false, the Height property value is used as a ratio of the available ‘Variable’ ‘Variable’ real estate (all ( all the left over room in the Process Analyst after Fixed Height panes have been added) which is shared out between all the Variable Height panes. See Also
IPane.Height [Property][Get/Set]
Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods. [VBA] Sub Example(pane As Object) Dim fixedHeight As Boolean ‘Getting Property value fixedHeight = pane.FixedHeight ‘Setting Property value pane.FixedHeight = True End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value INT bFixedHeight = _ObjectGetProperty(hPane, "FixedHeight"); // Setting property value _ObjectSetProperty(hPane, "FixedHeight", -1); END
IPane.Pens [Property][Get]
Gets a reference to the pens collection object containing the pens for this pane. Defined As
[VBA] Object Pens
[Cicode] OBJECT Pens
[C++] IPens* Pens
Execution Result If the property get succeeds the return value will be Success. If the pane is deleted the return value will be GeneralFailure. General Failure. See Also
IPens Interface
Calling Syntax This example assumes there is a valid Pane object to be passed into the example methods.
138
[VBA] Sub Example(pane As Object) Dim pens As Object ‘Getting Property value Set pens = pane.Pens End Sub
[Cicode] FUNCTION Example(OBJECT hPane) // Getting property value OBJECT hPens = _ObjectGetProperty(hPane, "Pens"); END
IPanes Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IPanes
Methods (2) IPanes.Create [Method] IPanes.RemoveAll [Method]
Properties (4) IPanes.Count [Property][Get] IPanes.Item [Property][Get] IPanes._NewEnum [Property][Get] IPanes.ItemByName [Property][Get]
IPanes.Create [Method]
Adds a pane to this collection and returns a reference to it. Defined As
[VBA] Create(name as String) as Object
[Cicode] OBJECT Create (STRING name)
[C++] HRESULT Create(BSTR name, IPane** pane)
Parameters name [in] The
name to give to the pane (0-250 characters).
Execution Result If the method succeeds, the return value will be Success. If a pane of the same name exists, the return value will be InvalidArgument. If the panes collection is deleted, the return value will be GeneralFailure. Remarks When this method succeeds it will return a reference to the new IPane object. See Also
IPanes Interface
139
Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. [VBA] Sub Example(Panes As Object) Dim pane As Object Set pane = Panes.Create(“Alarm Pane”) End Sub
[Cicode] FUNCTION Example(OBJECT hPanes) OBJECT hPane = _ObjectCallMethod(hPanes, “Create”, “Alarm Pane”); END
IPanes.RemoveAll [Method]
Removes all Panes from this Pane collection. Defined As
[VBA] RemoveAll()
[Cicode] RemoveAll()
[C++] HRESULT RemoveAll()
Execution Result If the method succeeds, the return value will be Success. If the panes collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. [VBA] Sub Panes(Buttons As Object) Panes.RemoveAll() End Sub
[Cicode] FUNCTION Example(OBJECT hPanes) _ObjectCallMethod(hPanes, “RemoveAll”); END
IPanes.Count [Property][Get]
Gets the number of Panes in this collection. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. If the panes collection is deleted, the return value will be GeneralFailure.
140
Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. [VBA] Sub Example(Panes As Object) Dim count As Long ‘Getting Property value count = Panes.Count End Sub
[Cicode] FUNCTION Example(OBJECT hPanes) // Getting property value INT nCount = _ObjectGetProperty(hPanes, "Count"); END
IPanes.Item [Property][Get]
Gets the Pane at the given index in this Pane collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IPane* Item)
Parameters index [in] Indicates
the location of the Pane item to return from this collection.
(One based) Execution Result If the property get succeeds the return value will be Success. If the index is out of range then the return value will be InvalidArgument. If the panes collection is deleted the return value will be GeneralFailure. See Also
IPane Interface
Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. [VBA] Sub Example(Panes As Object) Dim pane As Object ‘Getting Property value Set pane = Panes.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hPanes) // Getting property value OBJECT hPane = _ObjectCallMethod(hPanes, "get_Item", 1); END
141
IPanes._NewEnum [Property][Get]
This allows For.. Each.. Next integration in VB. Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. This property is not applicable to Cicode. [VBA] Sub Example(Panes As Object) Dim pane As Object Dim count As Long ‘Using Property For Each pane In Panes count = count + 1 Next pane End Sub
IPanes.ItemByName [Property][Get]
Returns a reference to the pane object with the given name from this Panes collection. Defined As
[VBA] ByName(name As String) as Object
[Cicode] OBJECT ByName(STRING name)
[C++] ByName(STRING name, IPane* Item)
Parameters name [in] Indicates
the name of the Pane item to return from this collection.
Execution Result If the property get succeeds, the return value will be Success. If the pane cannot be found, the return value will be InvalidArgument. If the panes collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Panes collection object to be passed into the example methods. [VBA] Sub Example(Panes As Object) Dim pane As Object ‘Getting Property value Set pane = Panes.ItemByName(“Alarm Pane”) End Sub
[Cicode] FUNCTION Example(OBJECT hPanes) // Getting property value OBJECT hPane = _ObjectCallMethod(hPanes, "get_ItemByName", "Alarm Pane"); END
142
IPen Interface Methods IPen.AddSample IPen.Clear [Method] IPen.Delete [Method] IPen.GetDefaultSpan [Method] IPen.GetHorizontalAxisTimeSpan [Method] IPen.GetInformation [Method] IPen.GetStatistic [Method] IPen.GetVerticalAxisSpan [Method] IPen.GoToNow [Method] IPen.HorizontalScrollBy [Method] IPen.HorizontalZoom [Method] IPen.PutHorizontalAxisTimeSpan [Method] IPen.PutVerticalAxisSpan [Method] IPen.RefreshData [Method] IPen.ResetToDefaultSpan [Method] IPen.Select [Method] IPen.SetDefaultSpan [Method] IPen.SetQualityCompactionPointType [Method] IPen.SetQualityLineStyle [Method] IPen.SetVerticalAxisLabelValue [Method] IPen.VerticalScrollBy [Method] IPen.VerticalZoom [Method]
Properties IPen.AxisBackgroundColor [Property][Get/Set] IPen.BlockRepaint [Property][Get/Set] IPen.Collection [Property][Get] IPen.DataPoint [Property][Get/Set] IPen.DataServer [Property][Get/Set] IPen.Height [Property][Get/Set] IPen.HorizontalAxisColor [Property][Get/Set] IPen.HorizontalAxisResize [Property][Get/Set] IPen.HorizontalAxisScroll [Property][Get/Set] IPen.HorizontalAxisWidth [Property][Get/Set] IPen.HorizontalGridlinesColor [Property][Get/Set] IPen.HorizontalGridlinesStyle [Property][Get/Set] IPen.HorizontalGridlinesWidth [Property][Get/Set] IPen.HorizontalMinorGridlinesColor [Property][Get/Set] IPen.HorizontalMinorGridlinesStyle [Property][Get/Set] IPen.IsDeleted [Property][Get] IPen.IsSelected [Property][Get] IPen.LocalTime [Property][Get/Set] IPen.Name [Property][Get/Set] IPen.PointsVisible [Property][Get/Set] IPen.RequestMode [Property][Get/Set] IPen.Stacked [Property][Get/Set] IPen.TrendCursorLabelFillColor [Property][Get/Set] IPen.TrendCursorLabelLineColor [Property][Get/Set] IPen.TrendCursorLabelTextColor [Property][Get/Set] IPen.VerticalAxisAutoscale [Property][Get/Set] IPen.VerticalAxisColor [Property][Get/Set] IPen.VerticalAxisLabelType [Property][Get/Set]
143
IPen.VerticalAxisResize [Property][Get/Set] IPen.VerticalAxisScroll [Property][Get/Set] IPen.VerticalAxisWidth [Property][Get/Set] IPen.VerticalGridlinesColor [Property][Get/Set] IPen.VerticalGridlinesStyle [Property][Get/Set] IPen.VerticalGridlinesWidth [Property][Get/Set] IPen.VerticalMinorGridlinesColor [Property][Get/Set] IPen.VerticalMinorGridlinesStyle [Property][Get/Set] IPen.Visible [Property][Get/Set]
IPen.AddSample
Adds a temporary sample to a pen. Defined As
[VBA] AddSample(value As Double, timeStamp as Date, milli as Integer, qualityType as Integer, compactionType as Integer)
[Cicode] AddSample(REAL value, DATE timeStamp, INT milli, INT qualityType, INT compactionType)
[C++] HRESULT AddSample(double value, DATE timeStamp, short milli, QualityType qualityType, QualityCompactionType compactionType)
Parameters value [in] Indicates
the value of the sample that will be added.
timeStamp [in] Indicates
at what time the sample will occur in UTC time.
milli [in] Indicates
the millisecond component of the time stamp (0 to 999).
qualityType [in] Indicates
the quality of the sample that will be added.
compactionType [in] Indicates
what display type the sample will be represented as.
Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If an argument is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. Remarks This function has limited use as the samples added are stored in a temporary cache; they can be cleared anytime by time span changes, data refresh calls, or automation. You can only add samples to analog or digital pens. See Also
QualityType [Enumeration] , QualityCompactionType [Enumeration]
Calling Syntax
144
Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim timeStamp As Date timestamp = Now pen.AddSample 75.0, timeStamp, 100, 0, 0 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT iCitectTime; REAL rOleTime; iCitectTime = TimeCurrent(); // Returns seconds since 1970 rOleTime = TimeToOleDate(iCitectTime, 1); // Convert to OLE UTC time _ObjectCallMethod(hPen, "AddSample", 75.0, timeStamp, 100, 0, 0); END
IPen.Clear [Method]
Clears all samples belonging to this pen from the internal cache. (Note: This does not remove logged samples from the server) Defined As
[VBA] Clear()
[Cicode] Clear()
[C++] HRESULT Clear()
Execution Result If the function succeeds the return value will be Success. If the pen is deleted then the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.Clear End Sub
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “Clear”); END
IPen.Delete [Method]
Deletes the pen from the Process Analyst. Defined As
[VBA] Delete()
[Cicode] Delete()
[C++] HRESULT Delete()
Execution Result
145
If the function succeeds, the return value will be Success. If the pen is already deleted, the return value will be GeneralFailure. Remarks Calling this method will mark the pen for deletion, meaning any further calls to methods or properties on the pen will result in a GeneralFailure error. The pen will be removed from the display immediately after making this call. See Also
IPen.IsDeleted [Property][Get]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.Delete End Sub
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “Delete”); END
IPen.GetDefaultSpan [Method]
Returns the default time span for this pen as a series of time components. Defined As
[VBA] GetDefaultSpan(weeks As Integer, days As Integer, hours As Integer, minutes As Integer, seconds As Integer, milliseconds As Integer)
[Cicode] GetDefaultSpan (INT weeks, INT days, DATE hours, INT minutes, INT seconds, INT milliseconds)
[C++] HRESULT GetDefaultSpan (short* weeks, short* days, sh ort* hours, short* minutes, short* seconds, short* milliseconds)
Parameters weeks [out] Indicates
the number of weeks in the span.
days [out] Indicates
the number of days in the span.
hours [out] Indicates
the number of hours in the span.
minutes [out] Indicates
the number of minutes in the span.
seconds [out] Indicates
the number of seconds in the span.
milliseconds [out] Indicates
Execution Result
the number of milliseconds in the span.
146
If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. See Also
IPen.SetDefaultSpan [Method] , IPen.ResetToDefaultSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim weeks As Integer Dim days As Integer Dim hours As Integer Dim minutes As Integer Dim seconds As Integer Dim milliseconds As Integer pen.GetDefaultSpan weeks, days, hours, minutes, seconds, milliseconds End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT weeks; INT days; INT hours; INT minutes; INT seconds; INT milliseconds; _ObjectCallMethod(hPen, “GetDefaultSpan”, weeks, days, hours, minutes, seconds, milliseconds); END
IPen.GetHorizontalAxis TimeSpan [Method]
Returns the start and end time of this pen in local or UTC time format. Defined As
[VBA] GetHorizontalAxisTimeSpan(startTime As Date, startMs as Integer, endTime as Date, endMs as Integer, localTime as Boolean)
[Cicode] GetHorizontalAxisTimeSpan (REAL startTime, INT startMs, REAL endTime, INT endMs, INT localTime)
[C++] HRESULT GetHorizontalAxisTimeSpan (DATE* startTime, sh ort* startMs, DATE* endTime, short* endMs, VARIANT_BOOL localTime)
Parameters startTime [out] This will contain the beginning date and
time without milliseconds of
the time span. startMs [out] This endTime
will contain the milliseconds component of the start time.
147
[out] This
will contain the end date and time without milliseconds.of the
time span. endMs [out] This
will contain the milliseconds component of the end time.
localTime [in] Indicates
whether the times returned are in local time or UTC. True = 1, False (0) = UTC. Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. See Also
IPen.PutHorizontalAxisTimeSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim startDate As Date Dim endDate As Date Dim startMs As Integer Dim endMs As Integer pen.GetHorizontalAxisTimeSpan startDate, startMs, endDate, endMs, True End Sub
[Cicode] FUNCTION Example(OBJECT hPen) REAL startDate; REAL endDate; INT startMs; INT endMs; _ObjectCallMethod(hPen, “GetHorizontalAxisTimeSpan”, startDate, startMs, endDate, endMs, -1); END
IPen.GetInformation [Method]
Returns information associated with this pen. Defined As
[VBA] GetInformation(name As String) As String
[Cicode] STRING GetInformation(STRING name)
[C++] HRESULT GetDefaultSpan (BSTR name, BSTR* value)
Parameters name [in] Specify the pen information attribute you want to get
Remarks below for supported attributes.
the value for. See
148
value [out] Indicates
the value of the specified information attribute.
Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If the attribute does not exist, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. Information Attributes Attribute
Returns
Applies to
Alarm Area
Alarm tag field
Alarm
Alarm Category
Alarm tag field
Alarm
Alarm Desc
Alarm tag field
Alarm
Alarm Name
Alarm tag field
Alarm
Alarm Type
Alarm tag field
Alarm
Comment
Alarm/Trend tag comment field
All
Duration
Process Analyst time span
All
End Time
Process Analyst axis end time
All
Engineering Full Scale
Trend tag field
Analog, Digital
Engineering Units
Trend tag field
Analog, Digital
Engineering Zero Scale
Trend tag field
Analog, Digital
Error
Process Analyst error status
All
Full Scale
Process Analyst vertical axis max scale
Analog,
Name
Process Analyst pen name
All
Raw Full Scale
Trend tag field
Analog, Digital
Raw Zero Scale
Trend tag field
Analog, Digital
Sample Period
Trend tag field
Analog, Digital
Start Time
Process Analyst axis start time
All
Tag
Process Analyst source binding field
All
Trend Type
Trend tag field
Analog, Digital
Zero Scale
Process Analyst vertical axis min scale
Analog
Scale
Process Analyst vertical axis scale range
Analog, Digital
Engineering Scale
Engineering scale range
Analog, Digita
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim duration As String duration = pen.GetInformation "Duration" End Sub
[Cicode] FUNCTION Example(OBJECT hPen) STRING duration; duration = _ObjectCallMethod(hPen, "GetInformation", "Duration"); END
149
IPen.GetStatistic [Method]
Returns the result of a specified Process Analyst statistical operation. Defined As
[VBA] GetStatistic(name As String, value As String)
[Cicode] GetStatistic(STRING name, STRING value)
[C++] HRESULT GetStatistic(BSTR name, BSTR* value)
Parameters name [in] Specify the statistic attribute
you want to get the value for. See Remarks below for supported attributes. value [out] Indicates
the value of the specified statistic attribute.
Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If the attribute does not exist, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. Information Attributes Attribute
Returns
Applies to
Average
Process Analyst real-time average
Analog, Digital
Maximum
Process Analyst real-time maximum
Analog
Minimum
Process Analyst real-time minimum
Analog
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim average As String pen.GetStatistic “Average”, average End Sub
[Cicode] FUNCTION Example(OBJECT hPen) STRING average; _ObjectCallMethod(hPen, “GetStastic”, “Average”, average); END
IPen.GetVerticalAxisSp an [Method]
Returns the current span of the pens’ vertical axis. Defined As
[VBA] GetVerticalAxisSpan(startValue As Double, endValue As Double)
[Cicode] GetVerticalAxisSpan (REAL startValue, REAL endValue)
[C++] HRESULT GetVerticalAxisSpan (double* startValue, double* endValue)
150
Parameters startValue [out] The
current lower bound of the vertical axis.
endValue [out] The
current upper bound of the vertical axis.
Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. If any other unexpected error occurs, the return value will be GeneralFailure. See Also
IPen.PutVerticalAxisSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim startValue As Double Dim endValue As Double pen.GetVerticalAxisSpan startValue, endValue End Sub
[Cicode] FUNCTION Example(OBJECT hPen) REAL startValue; REAL endValue; _ObjectCallMethod(hPen, “GetVerticalAxisSpan”, startValue, endValue); END
IPen.GoToNow [Method]
Synchronizes the end time of the pen’s span with your computer’s current local time. The start time will also be moved to maintain the pen’s current time span. Defined As
[VBA] GoToNow()
[Cicode] GoToNow()
[C++] HRESULT GoToNow()
Execution Result If the function succeeds, the return value will be Success. If the pen is deleted, the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.GoToNow End Sub
151
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “GoToNow”); END
IPen.HorizontalScrollBy [Method]
Scrolls the horizontal axis by the specified factor. Defined As
[VBA] HorizontalScrollBy(factor As Double)
[Cicode] HorizontalScrollBy(REAL factor)
[C++] HRESULT HorizontalScrollBy(double factor)
Parameters factor [in] Controls the direction and amount the axis will be scrolled. A
negative value will move the axis back in time; a positive value will move the axis forward in time. The value is a percentage representing the current viewable span. So if the pen span is 1 hour, and you specify a factor of 0.5, you will move the time span 30 minutes into the future. Execution Result If the function succeeds, the return value will be Success. If the argument is bad, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
IPen.VerticalScrollBy [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Move the pen span back one complete span into history pen.HorizontalScrollBy -1.0 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Move the pen span back one complete span into history _ObjectCallMethod(hPen, “HorizontalScrollby”, -1.0); END
IPen.HorizontalZoom [Method]
Zooms centrally into the time span by the given factor. Defined As
[VBA] HorizontalZoom(factor As Double)
[Cicode] HorizontalZoom(REAL factor)
[C++] HRESULT HorizontalZoom(double factor)
Parameters factor
152
[in] Controls the direction and amount the axis will be zoomed. Acceptable
zoom values are 0 to 1 (Zoom out) and > 1 (zoom in). Execution Result If the function succeeds the return value will be Success. If the argument is bad then the return value will be InvalidArgument. If the argument is out of range then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. See Also
IPen.VerticalZoom [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Zoom out 50% pen.HorizontalZoom 0.5 ‘ Undo the Zoom pen.HorizontalZoom 1.5 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Zoom out 50% _ObjectCallMethod(hPen, “HorizontalZoom”, 0.5); // Undo the Zoom _ObjectCallMethod(hPen, “HorizontalZoom”, 2.0); END
IPen.PointsVisible [Property][Get/Set]
Gets or Sets whether the sample points are displayed or hidden on the pen. Defined As
[VBA] Boolean PointsVisible
[Cicode] INT PointsVisible
[C++] VARIANT_BOOL PointsVisible
Execution Results If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
True(-1): Points are visible
False(0): Points are hidden
Remarks By default this property is False, meaning meanin g that any point type you have set using the SetQualityCompactionPointType SetQualityCompactionPointType function will be hidden. See Also
IPen.SetQualityCompactionPointType [Method]
Calling Syntax
153
Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim visible As Boolean ‘Getting Property value visible = pen.PointsVisible ‘Setting Property value pen.PointsVisible = True End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT visible; // Getting current property value visible = _ObjectGetProperty(hPen, "PointsVisible"); // Setting Property value _ObjectSetProperty(hPen, "PointsVisible", -1); END
IPen.PutHorizontalAxis TimeSpann [Method] TimeSpa [Method ]
Sets the start and end time of this pen. Defined As
[VBA] PutHorizontalAxisTimeSpan(startTime As Date, startMs as Integer, endTime as Date, endMs as Integer)
[Cicode] PutHorizontalAxisTimeSpan (REAL startTime, INT startMs, REAL endTime, INT endMs)
[C++] HRESULT PutHorizontalAxisTimeSpan (DATE* startTime, short* startMs, DATE* endTime, short* endMs)
Parameters startTime [in] Indicates the beginning date and time without milliseconds of the time
span in UTC format. startMs [in] Indicates
the milliseconds component of the start time.
endTime [in] Indicates the end date and time without milliseconds of the time span in UTC format. endMs [in] This
will contain the milliseconds component of the end time.
Execution Result If the function succeeds the return value will be Success. If an argument is bad then the return value will be InvalidArgument. If an argument is out of range then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. If any other unexpected error occurs the return value will be GeneralFailure.
154
Remarks The Process Analyst only supports setting its axis in UTC (Universal Coordinated Time) format. This means you must convert from local to UTC format yourself to make the axis display d isplay correctly in local time. Cicode provides several functions to do these conversions. Limits The horizontal axis has an upper limit of 1/1/2100 12:00:00.000 and a lower limit of 1/1/1900 12:00:00.000. The minimum span is 100 milliseconds. The maximum span is 200 years. See Also
IPen.GetHorizontalAxisTimeSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim startDate As Date Dim endDate As Date Dim startMs As Integer Dim endMs As Integer startDate = CDate(“16/6/2004 11:30:00”) endDate = CDate(“16/6/2004 12:29:00”) startMs = 0 endMs = 0 pen.PutHorizontalAxisTimeSpan startDate, startMs, endDate, endMs End Sub
[Cicode] FUNCTION Example(OBJECT hPen) REAL startDate; REAL endDate; startDate = StrToDate("16/6/04") + StrToTime("9:30:00"); endDate = StrToDate("16/6/04") + StrToTime("10:29:00"); startDate = TimeToOLEDate(startDate, 0); // Convert to UTC endDate = TimeToOLEDate(endDate, 0); // Convert to UTC _ObjectcallMethod(hPen, "PutHorizontalAxisTimeSpan", startDate, 0, endDate, 0); END
IPen.PutVerticalAxisSp an [Method]
Sets the current position and span of the pens’ vertical axis. Defined As
[VBA] GetVerticalAxisSpan(startValue GetVerticalAxisSpan(startValue As Double, endValue As Double)
[Cicode] GetVerticalAxisSpan (REAL startValue, startValue, REAL endValue) endValue)
[C++] HRESULT GetVerticalAxisSpan (double* startValue, startValue, double* endValue)
Parameters startValue [in] Indicates endValue
the new lower bound of the vertical axis.
155
[in] Indicates
the new upper bound of the vertical axis.
Execution Result If the function succeeds, the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If an argument is out of range, or the span is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Limits The vertical axis has a upper limit of 1+e10 and a lower limit of 1-e10. However, the maximum span supported is 1+e10. The minimum span is 0.00001. See Also
IPen.GetVerticalAxisSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.PutVerticalAxisSpan 200.5, 300.34 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “PutVerticalAxisSpan”, 200.5, 300.34); END
IPen.RefreshData [Method]
Clears all samples belonging to this pen from the internal cache and then issues a new request for data. Defined As
[VBA] RefreshData()
[Cicode] RefreshData ()
[C++] HRESULT RefreshData ()
Execution Result If the function succeeds the return value will be Success. If the pen is deleted then the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.RefreshData End Sub
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “RefreshData”); END
156
IPen.ResetToDefaultSp an [Method]
Resets the span of this pen to its default span. Defined As
[VBA] ResetToDefaultSpan() ResetToDefaultSpan()
[Cicode] ResetToDefaultSpan() ResetToDefaultSpan()
[C++] HRESULT ResetToDefaultSpan() ResetToDefaultSpan()
Execution Result If the function succeeds, the return value will be Success. If the pen is deleted, the return value will be GeneralFailure. Remarks The default span of all pens is 10 minutes. This can be modified by using IPen.SetDefaultSpan. See Also
IPen.GetDefaultSpan [Method], [Method], IPen.SetDefaultSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.ResetToDefaultSpan End Sub
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “ResetToDefaultSpan”); END
IPen.Sele IPe n.Select ct [Method]
Makes this pen the primary selected pen. Defined As
[VBA] Select()
[Cicode] Select()
[C++] HRESULT Select()
Execution Result If the function succeeds, the return value will be Success. If the pen is deleted, the return value will be GeneralFailure. Remarks Calling this method will also trigger PenSelectionChanged [Event]. [Event]. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) pen.Select End Sub
157
[Cicode] FUNCTION Example(OBJECT hPen) _ObjectCallMethod(hPen, “Select”); END
IPen.SetDefaultSpan [Method]
Sets the default time span for this pen. Defined As
[VBA] SetDefaultSpan(weeks As Integer, days As Integer, hours As Integer, minutes As Integer, seconds As Integer, milliseconds As Integer)
[Cicode] SetDefaultSpan (INT weeks, INT days, DATE hours, INT minutes, INT seconds, INT milliseconds)
[C++] HRESULT SetDefaultSpan (short weeks, short days, short hours, short minutes, short seconds, short milliseconds)
Parameters weeks [in] Indicates
the number of weeks in the span.
days [in] Indicates
the number of days in the span.
hours [in] Indicates
the number of hours in the span.
minutes [in] Indicates
the number of minutes in the span.
seconds [in] Indicates
the number of seconds in the span.
milliseconds [in] Indicates
the number of milliseconds in the span.
Execution Result If the function succeeds the return value will be Success. If an argument is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. See Also
IPen.GetDefaultSpan [Method], IPen.ResetToDefaultSpan [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Set span to 2 hours and 30 minutes pen.GetDefaultSpan 0, 0, 2, 30, 0, 0 End Sub
158
[Cicode] FUNCTION Example(OBJECT hPen) // Set span to 2 hours and 30 minutes _ObjectCallMethod(hPen, “SetDefaultSpan”, 0, 0, 2, 30, 0, 0); END
IPen.SetQualityCompac tionPointType [Method]
Use this function to indicate what visual cue to display for single and multiple samples. Defined As
[VBA] SetQualityCompactionPointType(compactionType As Integer, pointType As Integer)
[Cicode] SetQualityCompactionPointType(INT compactionType, INT pointType)
[C++] HRESULT SetQualityCompactionPointType(QualityCompactionType compactionType, PointType pointType)
Parameters compactionType [in] Indicates which sample compaction type you want to set the
visual cue
for. pointType [in] Indicates
which visual cue to use for the selected compaction type.
Execution Result If the function succeeds the return value will be Success. If an argument is bad, the return value will be InvalidArgument. If an argument is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
QualityCompactionType [Enumeration], PointType [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Set single samples to lsook like triangles pen.SetQualityCompactionPointType 0, 5 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Set single samples to look like triangles _ObjectCallMethod(hPen, "SetQualityCompactionPointType", 0, 5); END
IPen.SetQualityLineStyl e [Method]
This function can be used to change the type of line drawn for each of the quality states defined by the Process Analyst for this Pen only. Defined As
159
[VBA] SetQualityLineStyle(qualityType SetQualityLineStyle(qualityType As Integer, lineStyle As Integer)
[Cicode] SetQualityLineStyle(INT qualityType, INT lineStyle)
[C++] HRESULT SetQualityLineStyle(QualityType qualityType, LineStyle lineStyle)
Parameters qualityType [in] Indicates which quality type
you want to set the visual cue for.
lineStyle
vis ual cue to use for the selected quality [in] Indicates which line style visual
type.
Execution Result If the function succeeds the return value will be Success. If an argument is bad then the return value will be InvalidArgument. If an argument is out of range then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks When a sample is added to the display, its quality value indicates how the line drawn from that sample to the next one will be displayed. See Also
QualityType [Enumeration], [Enumeration], LineStyle [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Set all lines drawn after NA samples to be drawn as dash_dot pen.SetQualityLineStyle 1, 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Set all lines drawn after NA samples to be drawn as dash_dot _ObjectCallMethod(hPen, “SetQualityLineStyle”, 1, 3); END
IPen.SetVerticalAxisLab elValue elV alue [Me [ Method thod ]
This function can be used to display custom text for a particular value on the Vertical Axis. Defined As
[VBA] SetVerticalAxisLabelValue(value SetVerticalAxisLabelValue(value As Double, label As String)
[Cicode] SetVerticalAxisLabelValue(REAL SetVerticalAxisLabelValue(REAL value, STRING label)
[C++] HRESULT SetVerticalAxisLabelValue(double SetVerticalAxisLabelValue(double value, BSTR label)
Parameters value [in] Indicates which value you want to replace with
a custom label.
160
label [in] Indicates
the text that will be displayed di splayed instead of the specified value.
Execution Result If the function succeeds the return value will be Success. If an argument is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Change the vertical axis to display High High instead of 95 pen.SetVerticalAxisLabelValue 95, “High High” End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Change the vertical axis to display High High instead of 95 _ObjectCallMethod(hPen, “SetVerticalAxisLabelValue”, 95, “High High”); END
IPen.VerticalScrollBy [Method]
Scrolls the vertical axis by the specified factor. factor. Defined As
[VBA] VerticalScrollBy(factor As Double)
[Cicode] VerticalScrollBy(REAL factor)
[C++] HRESULT VerticalScrollBy(double factor)
Parameters factor [in] Controls the direction and amount the axis will be scrolled. A
negative value will move the axis in the negative direction. A positive value will move the axis forward in the positive direction. The value is a percentage representing the current viewable span. So if the pen span is 100 units (10 to 110), and you specify a factor of 0.5 then you will move the span 50 units (60 to 160). Execution Result If the function succeeds the return value will be Success. If the argument is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. See Also
IPen.HorizontalScrollBy [Method]
Calling Syntax Assumes you have passed a valid pen object into the function.
161
[VBA] Sub Example(pen As Object) ‘ Move the pen span forward one complete span pen.VerticalScrollBy 1.0 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Move the pen span forward one complete span _ObjectCallMethod(hPen, “VerticalScrollby”, 1.0); END
IPen.VerticalZoom [Method]
Zooms centrally into the time span by the given factor on the vertical axis Defined As
[VBA] VerticalZoom(factor As Double)
[Cicode] VerticalZoom (REAL factor)
[C++] HRESULT VerticalZoom (double factor)
Parameters factor [in] Controls the direction and amount the axis will be zoomed. Acceptable
zoom values are 0 to 1 (Zoom out) and > 1 (zoom in). Execution Result If the function succeeds the return value will be Success. If the argument is bad then the return value will be InvalidArgument. If the argument is out of range then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. See Also
IPen.HorizontalZoom [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) ‘ Zoom out 50% pen.VerticalZoom 0.5 ‘ Undo the Zoom pen.VerticalZoom 1.5 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) // Zoom out 50% _ObjectCallMethod(hPen, “VerticalZoom”, 0.5); // Undo the Zoom _ObjectCallMethod(hPen, “VerticalZoom”, 2.0); END
162
IPen.AxisBackgroundC olor [Property][Get/Set]
Gets or sets the background color of the axis of this pen. Defined As
[VBA] Long BackgroundColor
[Cicode] INT BackgroundColor
[C++] OLE_COLOR BackgroundColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks The background is the area underneath the axis lines and values. To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255 Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim backgroundColor As Long ‘Getting Property value backgroundColor = pen.AxisBackgroundColor ‘Setting Property value to Red pen.AxisBackgroundColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT backgroundColor; // Getting current property value backgroundColor = _ObjectGetProperty(hPen, “AxisBackgroundColor”); // Setting Property to Red _ObjectSetProperty(hPen, “AxisBackgroundColor”, PackedRGB(255, 0, 0)); END
IPen.BlockRepaint [Property][Get/Set]
Use this property to halt or continue any drawing updates to this pen. Defined As
[VBA] Boolean BlockRepaint
[Cicode] INT BlockRepaint
[C++] VARIANT_BOOL BlockRepaint
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks
163
This property is useful if you are modifying several properties at once as it will help reduce flicker and the amount of processing required. Simply set the property to True True (-1), change as many properties as you want, and then set the property to False (0). Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim blockRepaint As Boolean ‘Getting Property value blockRepaint = pen.BlockRepaint ‘Setting Property value pen.BlockRepaint = True End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bBlockRepaint; // Getting current property value bBlockRepaint = _ObjectGetProperty(hPen, “BlockRepaint”); // Setting Property _ObjectSetProperty(hPen, “BlockRepaint”, -1); END
IPen.Collection [Property][Get]
Returns a reference to the Pens collection object that this pen belongs to. Defined As
[VBA] Object Collection
[Cicode] OBJECT Collection
[C++] IPen* Collection
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim pens As Object ‘Getting Property value Set pens = pen.Collection End Sub
164
[Cicode] FUNCTION Example(OBJECT hPen) OBJECT pens; // Getting current property value pens = _ObjectGetProperty(hPen, “Collection”); END
IPen.DataPoint [Property][Get/Set]
Get or Set the trend/alarm tag which this pen is bound to. Defined As
[VBA] String DataPoint
[Cicode] STRING DataPoint
[C++] BSTR DataPoint
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the tag is greater than 79 characters, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Remarks This property works in conjunction with the DataServer property. This property can be changed during the lifetime of the pen. Changing the DataPoint property will result in the data cache being cleared and a new data request issued. A request for the tag’s information will also be issued. See Also
IPen.DataServer [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim tag As String ‘Getting Property value tag = pen.DataPoint ‘Setting Property value pen.DataPoint = “LOOP_1_PV” End Sub
[Cicode] FUNCTION Example(OBJECT hPen) STRING tag; // Getting current property value tag = _ObjectGetProperty(hPen, “DataPoint”); // Setting Property _ObjectSetProperty(hPen, “DataPoint”, “LOOP_1_PV”); END
IPen.DataServer [Property][Get/Set]
Get or Set the server that this pen is bound to. Defined As
[VBA] String DataServer
165
[Cicode] STRING DataServer
[C++] BSTR DataServer
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the server connection cannot be found, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Remarks This property currently only supports two options, “localhost” and “” (empty string), which indicates an unbound connection. Local host means the pen will use the local Vijeo Citect client to source data from the Vijeo Citect trend/alarm servers. This property works in conjunction with the DataPoint property. This property can be changed during the lifetime of the pen. See Also
IPen.DataPoint [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim server As String ‘Getting Property value server = pen.DataServer ‘Setting Property value pen.DataPoint = “localhost” End Sub
[Cicode] FUNCTION Example(OBJECT hPen) STRING server; // Getting current property value server = _ObjectGetProperty(hPen, “DataServer”); // Setting Property _ObjectSetProperty(hPen, “DataServer”, “localhost”); END
IPen.Height [Property][Get/Set]
Get or Set the physical height in pixels that the pen will allocate for itself when displayed in Stacked mode. Defined As
[VBA] Integer Height
[Cicode] INT Height
[C++] double Height
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If height set is out of
166
range (16 – 1000), the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Remarks This property is ignored when the pen is not in Stacked mode. See Also
IPen.Stacked [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim height As Boolean `Getting Property value height = pen.Height `Setting Property value pen.Height = 75 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT height; // Getting current property value height = _ObjectGetProperty(hPen, "Height"); // Setting Property _ObjectSetProperty(hPen, "Height", 75); END
IPen.HorizontalAxisCol or [Property][Get/Set]
Gets or sets the color used to draw the line, labels, and interval markers of the horizontal axis of this pen. Defined As
[VBA] Long HorizontalAxisColor
[Cicode] INT HorizontalAxisColor
[C++] OLE_COLOR HorizontalAxisColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula: (65536 * Blue) + (256 * Green) + (Red) where Red, Green, and Blue are 0-255. See Also
IPen.VerticalAxisColor [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function.
167
[VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen.HorizontalAxisColor ‘Setting Property value to Red pen.HorizontalAxisColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “HorizontalAxisColor”); // Setting Property to Red _ObjectSetProperty(hPen, “HorizontalAxisColor”, PackedRGB(255, 0, 0)); END
IPen.HorizontalAxisResi ze [Property] [Get/Set]
Gets or sets whether this pen allows the operator to interactively scale the horizontal axis using the mouse. Defined As
[VBA] Boolean HorizontalAxisResize
[Cicode] INT HorizontalAxisResize
[C++] VARIANT_BOOL HorizontalAxisResize
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
See Also
True (-1): Axis can be resized
False (0): Axis cannot be resized
IPen.VerticalAxisResize [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim resize As Boolean ‘Getting Property value resize = pen.HorizontalAxisResize ‘Setting Property value pen.HorizontalAxisResize = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bResize; // Getting current property value
168
bResize = _ObjectGetProperty(hPen, “HorizontalAxisResize”); // Setting Property _ObjectSetProperty(hPen, “HorizontalAxisResize”,0); END
IPen.HorizontalAxisScr oll [Property][Get/Set]
Gets or sets whether this pen allows the operator to interactively scroll the horizontal axis using the mouse. Defined As
[VBA] Boolean HorizontalAxisScroll
[Cicode] INT HorizontalAxisScroll
[C++] VARIANT_BOOL HorizontalAxisScroll
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Limits
See Also
True (-1): Axis can be scrolled
False (0): Axis cannot be scrolled
IPen.VerticalAxisScroll [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim scroll As Boolean ‘Getting Property value scroll = pen.HorizontalAxisScroll ‘Setting Property value pen.HorizontalAxisScroll = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bScroll; // Getting current property value bScroll = _ObjectGetProperty(hPen, “HorizontalAxisScroll”); // Setting Property _ObjectSetProperty(hPen, “HorizontalAxisScroll”, 0); END
IPen.HorizontalAxisWid th [Property][Get/Set]
Gets or sets the width of the horizontal axis line and the associated interval markers. Defined As
[VBA] Integer HorizontalAxisWidth
[Cicode] INT HorizontalAxisWidth
[C++] short HorizontalAxisWidth
169
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits A valid width is 0-8 pixels. See Also
IPen.VerticalAxisWidth [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim width As Integer ‘Getting Property value width = pen.HorizontalAxisWidth ‘Setting Property value pen.HorizontalAxisWidth = 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT width; // Getting current property value width = _ObjectGetProperty(hPen, “HorizontalAxisWidth”); // Setting Property _ObjectSetProperty(hPen, “HorizontalAxisWidth”, 3); END
IPen.HorizontalGridline sColor [Property][Get/ Set]
Gets or sets the color used to draw the major horizontal gridlines. Defined As
[VBA] Long HorizontalGridlinesColor
[Cicode] INT HorizontalGridlinesColor
[C++] OLE_COLOR HorizontalGridlinesColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits A valid width is 0-8 pixels. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255 See Also
IPen.HorizontalMinorGridlinesColor [Property][Get/Set]
Calling Syntax
170
Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen.HorizontalGridlinesColor ‘Setting Property value to Red pen.HorizontalGridlinesColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “HorizontalGridlinesColor”); // Setting Property to Red _ObjectSetProperty(hPen, “HorizontalGridlinesColor”, PackedRGB(255, 0, 0)); END
IPen.HorizontalGridline sStyle [Property][Get/ Set]
Gets or sets the line style used to draw the major horizontal gridlines. Defined As
[VBA] Long HorizontalGridlinesStyle
[Cicode] INT HorizontalGridlinesStyle
[C++] LineStyle HorizontalGridlinesStyle
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the style is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
IPen.HorizontalMinorGridlinesColor [Property][Get/Set], LineStyle [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim style As Long ‘Getting Property value style = pen.HorizontalGridlinesStyle ‘Setting Property value to Dot pen.HorizontalGridlinesColor = 2 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT style; // Getting current property value style = _ObjectGetProperty(hPen, “HorizontalGridlinesStyle”);
171
// Setting Property to Dot _ObjectSetProperty(hPen, “HorizontalGridlinesStyle”, 2); END
IPen.HorizontalGridline sWidth [Property][Get/ Set]
Gets or sets the line width used when drawing the major horizontal gridlines. Defined As
[VBA] Integer HorizontalGridlinesWidth
[Cicode] INT HorizontalGridlinesWidth
[C++] short HorizontalGridlinesWidth
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the width is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim width As Integer ‘Getting Property value width = pen.HorizontalGridlinesWidth ‘Setting Property value pen.HorizontalGridlinesWidth = 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT width; // Getting current property value width = _ObjectGetProperty(hPen, “HorizontalGridlinesWidth”); // Setting Property t _ObjectSetProperty(hPen, “HorizontalGridlinesWidth”, 3); END
IPen.HorizontalMinorGri dlinesColor [Property][Get/Set]
Gets or sets the color used to draw the minor horizontal gridlines. Defined As
[VBA] Long HorizontalMinorGridlinesColor
[Cicode] INT HorizontalMinorGridlinesColor
[C++] OLE_COLOR HorizontalMinorGridlinesColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks
172
To calculate the integer value required for a color apply the following formula: (65536 * Blue) + (256 * Green) + (Red) where Red, Green, and Blue are 0-255. See Also
IPen.HorizontalGridlinesColor [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen.HorizontalMinorGridlinesColor ‘Setting Property value to Red pen.HorizontalMinorGridlinesColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “HorizontalMinorGridlinesColor”); // Setting Property to Red _ObjectSetProperty(hPen, “HorizontalMinorGridlinesColor”, PackedRGB(255, 0, 0)); END
IPen.HorizontalMinorGri dlinesStyle [Property][Get/Set]
Gets or sets the line style used to draw the minor horizontal gridlines. Defined As
[VBA] Long HorizontalMinorGridlinesStyle
[Cicode] INT HorizontalMinorGridlinesStyle
[C++] LineStyle HorizontalMinorGridlinesStyle
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the style is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
IPen.HorizontalGridlinesStyle [Property][Get/Set], LineStyle [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim style As Long ‘Getting Property value style = pen.HorizontalMinorGridlinesStyle
173
‘Setting Property value to Dot pen.HorizontalMinorGridlinesColor = 2 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT style; // Getting current property value style = _ObjectGetProperty(hPen, “HorizontalMinorGridlinesStyle”); // Setting Property to Dot _ObjectSetProperty(hPen, “HorizontalMinorGridlinesStyle”, 2); END
IPen.IsDeleted [Property][Get]
Returns whether this pen has been marked for deletion. That is, whether someone has called the Delete method on it or deleted it from the display. Defined As
[VBA] Boolean IsDeleted
[Cicode] INT IsDeleted
[C++] VARIANT_BOOL IsDeleted
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. See Also
IPen.Delete [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim deleted As Boolean deleted = pen.IsDeleted End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bDeleted; bDeleted = _ObjectGetProperty(hPen, “IsDeleted”); END
IPen.IsSelected [Property][Get]
Returns whether this pen has been selected in the Process Analyst. Defined As
[VBA] Boolean IsSelected
[Cicode] INT IsSelected
[C++] VARIANT_BOOL IsSelected
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument.
174
See Also
IPen.Select [Method]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim selected As Boolean selected = pen.IsSelected End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bSelected; bSelected = _ObjectGetProperty(hPen, “IsSelected”); END
IPen.LocalTime [Property][Get/Set]
Get or Set whether the axis will display time in the computers current local format or in UTC (Universal Time Coordinate). Defined As
[VBA] Boolean LocalTime
[Cicode] INT LocalTime
[C++] VARIANT_BOOL LocalTime
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
True (-1): Local format
False (0): UTC format
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim localTime As Boolean ‘Getting Property value localTime = pen.LocalTime ‘Display time in UTC pen.LocalTime = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bLocalTime; // Getting current property value bLocalTime = _ObjectGetProperty(hPen, “LocalTime”);
175
// Display time in UTC _ObjectSetProperty(hPen, “LocalTime”, 0); END
IPen.Name [Property][Get/Set]
Get or Set the name of this pen. Defined As
[VBA] String Name
[Cicode] STRING Name
[C++] BSTR Name
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the length of the name is wrong then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks The Process Analyst will use this name extensively throughout the user interface to reference this pen. The name of the pen does not have to be unique, but it must be between 1 and 250 character long. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim name As String ‘Getting Property value name = pen.Name ‘Setting property value pen.Name = “NicePen” End Sub
[Cicode] FUNCTION Example(OBJECT hPen) STRING name; // Getting current property value name = _ObjectGetProperty(hPen, “Name”); // Setting property value _ObjectSetProperty(hPen, “Name”, “NicePen”); END
IPen.RequestMode [Property][Get/Set]
Get or Set how multiple samples will be calculated on the server. Defined As
[VBA] Integer RequestMode
[Cicode] INT RequestMode
[C++] RequestMode RequestMode
176
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the mode is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Remarks When the pen makes a request for data and samples need to be compacted, it will use this mode to determine how the compaction will occur. Changing this mode will clear the data cache and issue a new request for data. See Also
RequestMode [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim requestMode As Integer ‘Getting Property value requestMode = pen.RequestMode ‘Setting mode to minimum pen.RequestMode = 1 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT requestMode; // Getting current property value requestMode = _ObjectGetProperty(hPen, “RequestMode”); // Setting mode to minimum _ObjectSetProperty(hPen, “RequestMode”, 1); END
IPen.Stacked [Property][Get/Set]
Get or Set whether the pen is visually displayed stacked or overlaid. Defined As
[VBA] Boolean Stacked
[Cicode] INT Stacked
[C++] VARIANT_BOOL Stacked
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
True (-1): Stacked
False (0): Overlaid
Remarks
177
When stacked, pens will be drawn under each other; when overlaid, the pens will be drawn over the top of each other. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim stacked As Boolean ‘Getting Property value stacked = pen.Stacked ‘Setting Property value pen.Stacked = True End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bStacked; // Getting current property value bStacked = _ObjectGetProperty(hPen, “Stacked”); // Setting property value _ObjectSetProperty(hPen, “Stacked”, -1); END
IPen.TrendCursorLabel FillColor [Property][Get/ Set]
Gets or sets the fill color used for any cursor label associated with this pen. Defined As
[VBA] Long TrendCursorLabelFillColor
[Cicode] INT TrendCursorLabelFillColor
[C++] OLE_COLOR TrendCursorLabelFillColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen. TrendCursorLabelFillColor ‘Setting Property value to Red pen. TrendCursorLabelFillColor = 255 End Sub
178
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “TrendCursorLabelFillColor”); // Setting Property to Red _ObjectSetProperty(hPen, “TrendCursorLabelFillColor”, PackedRGB(255, 0, 0)); END
IPen.TrendCursorLabel LineColor [Property][Get/Set]
Gets or sets the border color used for any cursor label associated with this pen. Defined As
[VBA] Long TrendCursorLabelLineColor
[Cicode] INT TrendCursorLabelLineColor
[C++] OLE_COLOR TrendCursorLabelLineColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen. TrendCursorLabelLineColor ‘Setting Property value to Red pen. TrendCursorLabelLineColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “TrendCursorLabelLineColor”); // Setting Property to Red _ObjectSetProperty(hPen, “TrendCursorLabelLineColor”, PackedRGB(255, 0, 0)); END
IPen.TrendCursorLabel TextColor [Property][Get/Set]
Gets or sets the text color used for any cursor label associated with this pen. Defined As
[VBA] Long TrendCursorLabelTextColor
[Cicode] INT TrendCursorLabelTextColor
179
[C++] OLE_COLOR TrendCursorLabelTextColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen. TrendCursorLabelTextColor ‘Setting Property value to Red pen. TrendCursorLabelTextColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “TrendCursorLabelTextColor”); // Setting Property to Red _ObjectSetProperty(hPen, “TrendCursorLabelTextColor”, PackedRGB(255, 0, 0)); END
IPen.VerticalAxisAutosc ale [Property][Get/Set]
Gets or sets whether the vertical axis will automatically calculate its physical limits based on the sample values within its internal cache. Defined As
[VBA] Boolean VerticalAxisAutoscale
[Cicode] INT VerticalAxisAutoscale
[C++] VARIANT_BOOL VerticalAxisAutoscale
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks Setting this property will turn off interactive Scrolling (IPen.HorizontalAxisScroll) and Scaling (IPen.HorizontalAxisResize). Limits
True (-1): Autoscale enabled
180
False (0): Autoscale disabled
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim autoScale As Long ‘Getting Property value autoScale = pen. VerticalAxisAutoscale ‘Setting Property value pen. VerticalAxisAutoscale = True End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT autoScale; // Getting current property value autoScale = _ObjectGetProperty(hPen, “VerticalAxisAutoscale”); // Setting Property _ObjectSetProperty(hPen, “VerticalAxisAutoscale”, -1); END
IPen.VerticalAxisColor [Property][Get/Set]
Gets or sets the color used to draw the line, labels and interval markers of the vertical axis of this pen. Defined As
[VBA] Long VerticalAxisColor
[Cicode] INT VerticalAxisColor
[C++] OLE_COLOR VerticalAxisColor
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. See Also
IPen.HorizontalAxisColor [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen.VerticalAxisColor ‘Setting Property value to Red pen.VerticalAxisColor = 255 End Sub
181
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “VerticalAxisColor”); // Setting Property to Red _ObjectSetProperty(hPen, “VerticalAxisColor”, PackedRGB(255, 0, 0)); END
IPen.VerticalAxisLabelT ype [Property][Get/Set]
Gets or sets a unit type which can be applied to the axis labels. This allows numbers on the axis to display with their unit. For example, setting the unit to “kg” will display “10 Kg” on the axis. Defined As
[VBA] Integer VerticalAxisLabelType
[Cicode] INT VerticalAxisLabelType
[C++] AxisLabelType VerticalAxisLabelType
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the pen is deleted then the return value will be GeneralFailure. Remarks Label Types are fixed and cannot be added to. See Also
AxisLabelType [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim labelType As Integer ‘Getting Property value labelType = pen.VerticalAxisLabelType ‘Setting Property value to Percent pen.VerticalAxisLabelType= 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT labelType; // Getting current property value labelType = _ObjectGetProperty(hPen, “VerticalAxisLabelType”); // Setting Property to Percent _ObjectSetProperty(hPen, “VerticalAxisLabelType”, 3); END
IPen.VerticalAxisResize [Property][Get/Set]
Gets or sets whether this pen allows the operator to interactively scale the vertical axis by using the mouse. Defined As
182
[VBA] Boolean VerticalAxisResize
[Cicode] INT VerticalAxisResize
[C++] VARIANT_BOOL VerticalAxisResize
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
True (-1): Enable resize
False (0): Disable resize
Remarks This only applies to analog pens. See Also
IPen.HorizontalAxisResize [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim resize As Boolean ‘Getting Property value resize = pen. VerticalAxisResize ‘Setting Property value pen. VerticalAxisResize = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bResize; // Getting current property value bResize = _ObjectGetProperty(hPen, “VerticalAxisResize”); // Setting Property _ObjectSetProperty(hPen, “VerticalAxisResize”,0); END
IPen.VerticalAxisScroll [Property][Get/Set]
Gets or sets whether this pen allows the operator to interactively scroll the vertical axis by using the mouse. Defined As
[VBA] Boolean VerticalAxisScroll
[Cicode] INT VerticalAxisScroll
[C++] VARIANT_BOOL VerticalAxisScroll
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure.
183
Limits
True (-1): Enable scrolling
False (0): Disable scrolling
Remarks This only applies to analog pens. See Also
IPen.HorizontalAxisScroll [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim scroll As Boolean ‘Getting Property value scroll = pen.VerticalAxisScroll ‘Setting Property value pen.VerticalAxisScroll = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bScroll; // Getting current property value bScroll = _ObjectGetProperty(hPen, “VerticalAxisScroll”); // Setting Property _ObjectSetProperty(hPen, “VerticalAxisScroll”, 0); END
IPen.VerticalAxisWidth [Property][Get/Set]
Gets or sets the width of the vertical axis line and the associated interval markers. Defined As
[VBA] Integer VerticalAxisWidth
[Cicode] INT VerticalAxisWidth
[C++] short VerticalAxisWidth
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits A valid width is 0-8 pixels. Remarks This only applies to analog pens. See Also
IPen.HorizontalAxisWidth [Property][Get/Set]
Calling Syntax
184
Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim width As Integer ‘Getting Property value width = pen.VerticalAxisWidth ‘Setting Property value pen.VerticalAxisWidth = 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT width; // Getting current property value width = _ObjectGetProperty(hPen, “VerticalAxisWidth”); // Setting Property _ObjectSetProperty(hPen, “VerticalAxisWidth”, 3); END
IPen.VerticalGridlinesC olor [Property][Get/Set]
Gets or sets the color used to draw the major vertical gridlines. Defined As
[VBA] Long VerticalGridlinesColor
[Cicode] INT VerticalGridlinesColor
[C++] OLE_COLOR VerticalGridlinesColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. See Also
IPen.VerticalMinorGridlinesColor [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen.VerticalGridlinesColor ‘Setting Property value to Red pen. VerticalGridlinesColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value
185
color = _ObjectGetProperty(hPen, “VerticalGridlinesColor”); // Setting Property to Red _ObjectSetProperty(hPen, “VerticalGridlinesColor”, PackedRGB(255, 0, 0)); END
IPen.VerticalGridlinesSt yle [Property][Get/Set]
Gets or sets the line style used to draw the major vertical gridlines. Defined As
[VBA] Long VerticalGridlinesColor
[Cicode] INT VerticalGridlinesColor
[C++] LineStyle VerticalGridlinesColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the style is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
IPen.VerticalMinorGridlinesStyle [Property][Get/Set], LineStyle [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim style As Long ‘Getting Property value style = pen.VerticalGridlinesColor ‘Setting Property value to Dot pen.VerticalGridlinesColor = 2 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT style; // Getting current property value style = _ObjectGetProperty(hPen, “VerticalGridlinesStyle”); // Setting Property to Dot _ObjectSetProperty(hPen, “VerticalGridlinesStyle”, 2); END
IPen.VerticalGridlinesW idth [Property][Get/Set]
Gets or sets the line width used when drawing the major vertical gridlines. Defined As
[VBA] Integer VerticalGridlinesWidth
[Cicode] INT VerticalGridlinesWidth
[C++] short VerticalGridlinesWidth
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the width is out of
186
range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. Limits A valid width is 0-8 pixels. Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim width As Integer ‘Getting Property value width = pen.VerticalGridlinesWidth ‘Setting Property value pen.VerticalGridlinesWidth = 3 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT width; // Getting current property value width = _ObjectGetProperty(hPen, “VerticalGridlinesWidth”); // Setting Property t _ObjectSetProperty(hPen, “VerticalGridlinesWidth”, 3); END
IPen.VerticalMinorGridli nesColor [Property][Get/Set]
Gets or sets the color used to draw the minor vertical gridlines. Defined As
[VBA] Long VerticalMinorGridlinesColor
[Cicode] INT VerticalMinorGridlinesColor
[C++] OLE_COLOR VerticalMinorGridlinesColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Remarks To calculate the integer value required for a color apply the following formula (65536 * Blue) + (256 * Green) + (Red). Where Red, Green and Blue are 0-255. See Also
IPen.VerticalGridlinesColor [Property][Get/Set]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim color As Long ‘Getting Property value color = pen. VerticalMinorGridlinesColor
187
‘Setting Property value to Red pen.VerticalMinorGridlinesColor = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT color; // Getting current property value color = _ObjectGetProperty(hPen, “VerticalMinorGridlinesColor”); // Setting Property to Red _ObjectSetProperty(hPen, “VerticalMinorGridlinesColor”, PackedRGB(255, 0, 0)); END
IPen.VerticalMinorGridli nesStyle [Property][Get/ Set]
Gets or sets the line style used to draw the minor vertical gridlines. Defined As
[VBA] Long VerticalMinorGridlinesStyle
[Cicode] INT VerticalMinorGridlinesStyle
[C++] LineStyle VerticalMinorGridlinesStyle
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the style is out of range, the return value will be InvalidArgument. If the pen is deleted, the return value will be GeneralFailure. See Also
IPen.VerticalGridlinesStyle [Property][Get/Set], LineStyle [Enumeration]
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim style As Long ‘Getting Property value style = pen.VerticalMinorGridlinesStyle ‘Setting Property value to Dot pen.VerticalMinorGridlinesColor = 2 End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT style; // Getting current property value style = _ObjectGetProperty(hPen, “VerticalMinorGridlinesStyle”); // Setting Property to Dot _ObjectSetProperty(hPen, “VerticalMinorGridlinesStyle”, 2); END
IPen.Visible [Property][Get/Set]
Get or set whether this pen will be visually shown (True) or hidden (False) to the operator. Defined As
188
[VBA] Boolean Visible
[Cicode] INT Visible
[C++] VARIANT_BOOL Visible
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the pen is del eted, the return value will be GeneralFailure. Limits
True (-1): Visible
False (0): Hidden
Calling Syntax Assumes you have passed a valid pen object into the function. [VBA] Sub Example(pen As Object) Dim visible As Boolean ‘Get the property value visible = pen.Visible ‘ Set the property value pen.Visible = False End Sub
[Cicode] FUNCTION Example(OBJECT hPen) INT bVisible; // Get the property value bVisible = _ObjectGetProperty(hPen, “Visible”, 0.5); // Set the property value _ObjectSetProperty(hPen, “Visible”, 0); END
IPens Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IPens
Methods (2) IPens.Create [Method] IPens.RemoveAll [Method]
Properties (5) IPens.Count [Property][Get] IPens.Item [Property][Get] IPens._NewEnum [Property][Get] IPens.ItemByName [Property][Get] IPens.Pane[Property][Get]
189
IPens.Create [Method]
Creates a new pen and adds it to this collection. Defined As
[VBA] Create(penType As Integer, nameMode As Integer) as Object
[Cicode] OBJECT Create (INT penType, INT nameMode)
[C++] HRESULT Create(PenType penType, PenNameMode penNameMode, IPen** pen)
Parameters penType
Indicates the type of pen that will be created. See PenType Enumeration for the types of pen that can be created. [in]
penNameMode
Indicates how the name will be obtained for this pen. The Process Analyst provides options of PenNameMode_Comment, PenNameMode_Tag, and PenNameMode_Custom. Specifying PenNameMode_Comment will mean that the Process Analyst names the pen from the Comment field of the trend/alarm tag associated with the IPen.DataPoint property. Specifying PenNameMode_Tag will mean that the Process Analyst will name the pen as the value of the IPen.DataPoint property. Specifying PenNameMode_Custom causes the Process Analyst to provide a default name and leave setting the name to you via the IPen.Name property. [in]
Execution Results If the method succeeds the return value will be Success. If the pens collection is deleted, the return value will be GeneralFailure. Remarks If this method succeeds, a new Pen of the specified type is created and appended to the pens collection. See Also
IPen Interface , PenType [Enumeration] , PenNameMode [Enumeration] Calling Syntax This example assumes there is a valid Pens collection object to be passed in to the example methods. [VBA] Sub Example(pens As Object) Dim pen As Object Set pen = pens.Create(4097, 1) End Sub
[Cicode] FUNCTION Example(OBJECT hPens) OBJECT hPen = _ObjectCallMethod(hPens, “Create” , 4097, 1); END
190
IPens.RemoveAll [Method]
Removes all Pens from the Pens collection. Defined As
[VBA] RemoveAll()
[Cicode] RemoveAll()
[C++] HRESULT RemoveAll()
Execution Result If the property get/set succeeds the return value will be Success. If the pens collection is deleted the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods. [VBA] Sub Panes(pens As Object) pens.RemoveAll() End Sub
[Cicode] FUNCTION Example(OBJECT hPens) _ObjectCallMethod(hPens, “RemoveAll”); END
IPens.Count [Property][Get]
Gets the number of Pens in this collection. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. If the pens collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods. [VBA] Sub Example(Pens As Object) Dim count As Long ‘Getting Property value count = Pens.Count End Sub
[Cicode] FUNCTION Example(OBJECT hPens) // Getting property value INT nCount = _ObjectGetProperty(hPens, "Count"); END
191
IPens.Item [Property][Get]
Gets the Pen at the given index from this pen’s collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IPen* Item)
Parameters index [in] Indicates
the index of the pen item to return from this collection. (One
based) Execution Result If the property get succeeds, the return value will be Success. If the index is out of range, the return value will be InvalidArgument. If the pen’s collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods. [VBA] Sub Example(pens As Object) Dim pen As Object ‘Getting Property value Set pen = pens.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hPens) // Getting property value OBJECT hPen = _ObjectCallMethod(hPens, "get_Item", 1); END
IPens._NewEnum [Property][Get]
This allows For.. Each.. Next integration in VB. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods. This property is not applicable to Cicode. [VBA] Sub Example(Pens As Object) Dim pen As Object Dim count As Long ‘Using Property For Each pen In Pens count = count + 1 Next pen End Sub
IPens.ItemByName [Property][Get]
Gets the Pen of the given name from this Pens collection. Defined As
192
[VBA] ItemByName(name As String) as Object
[Cicode] OBJECT ItemByName(STRING name)
[C++] ItemByName(STRING name, IPen* Item)
Parameters name [in] Indicates
the name of the Pen item to return from this collection.
Execution Result If the property get succeeds, the return value will be Success. If the pen does not exist, the return value will be InvalidArgument. If the pens collection is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods. [VBA] Sub Example(Pens As Object) Dim pen As Object ‘Getting Property value Set pen = Pens.ItemByName(“CPU Usage”) End Sub
[Cicode] FUNCTION Example(OBJECT hPens) // Getting property value OBJECT hPen = _ObjectCallMethod(hPens, "get_ItemByName", "CPU Usage"); END
IPens.Pane[Property][G et]
Gets the Pane that this Pens collection belongs to. Defined As
[VBA] Object Pane
[Cicode] OBJECT Pane
[C++] HRESULT Pane(IPane** Pane)
Execution Result If the property get succeeds the return value will be Success. If the pens collection is deleted the return value will be GeneralFailure. Remarks Each Pens collection belongs to a Pane. Calling Syntax This example assumes there is a valid Pens collection object to be passed into the example methods.
193
[VBA] Sub Example(pens As Object) Dim pane As Object ‘Getting Property value Set pane = pens.Pane End Sub
[Cicode] FUNCTION Example(OBJECT hPens) // Getting property value OBJECT hPane = _ObjectGetProperty(hPens, "Pane"); END
IProcessAnalyst Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IProcessAnalyst
Methods IProcessAnalyst.BlockUpdates [Method] IProcessAnalyst.UnBlockUpdates [Method] IProcessAnalyst.CopyToClipboard [Method] IProcessAnalyst.CopyToFile [Method] IProcessAnalyst.FreezeEvent [Method] IProcessAnalyst.LoadFromFile [Method] IProcessAnalyst.PrintAll [Method] IProcessAnalyst.SaveToFile [Method] IProcessAnalyst.ShowProperties [Method] IProcessAnalyst.SubscribeForPropertyChange [Method] IProcessAnalyst.SynchroniseToNow [Method] IProcessAnalyst.UnsubscribePropertyChange [Method]
Properties IProcessAnalyst.AdminPrivilegeLevel [Property] [Get] IProcessAnalyst.AutoScroll [Property][Get/Set] IProcessAnalyst.BackgroundColor [Property][Get/Set] IProcessAnalyst.CommandSystem [Property][Get] IProcessAnalyst.ContextMenu [Property][Get/Set] IProcessAnalyst.Cursors [Property][Get] IProcessAnalyst.DataRequestRate [Property][Get/Set] IProcessAnalyst.DisplayRefreshRate [Property][Get/Set] IProcessAnalyst.Language [Property] [Get/Set] IProcessAnalyst.LastSelectedPen [Property][Get] IProcessAnalyst.LockedPens [Property][Get/Set] IProcessAnalyst.ObjectView [Property][Get] IProcessAnalyst.NumberofSamples[Property][Get/Set] IProcessAnalyst.Panes [Property][Get] IProcessAnalyst.PrimaryPath [Property][Get/Set] IProcessAnalyst.SecondaryPath [Property][Get/Set] IProcessAnalyst.Toolbars [Property][Get]
194
IProcessAnalyst.WritePrivilegeLevel [Property][Get] IProcessAnalyst.ZoomMode [Property][Get/Set]
IProcessAnalyst.BlockU pdates [Method]
Blocks certain aspects of the Process Analyst’s redrawing and data updating. Defined As
[VBA] BlockUpdates()
[Cicode] BlockUpdates()
[C++] HRESULT BlockUpdates()
Remarks
This method blocks three redraw systems: redraw for the chart, the Object View, and the toolbars.
Data updates are also blocked.
The current data requests are all cancelled.
See Also
The Process Analyst has a built-in counter to store how many times the block and unblock have been called, so that only the final UnBlockUpdates call actually unblocks the above mentioned data updates and redraw systems.
IProcessAnalyst.UnBlockUpdates [Method] Execution Result If the function suceeds, the return value will be Success. If the function fails, the return value will be general failure. Calling Syntax This example assumes there is a valid Process Analyst object to be passed into the example methods. [VBA] Sub Example(ProcessAnalyst As Object) ProcessAnalyst.BlockUpdates() End Sub
[Cicode] FUNCTION Example(OBJECT hProcessAnalyst) _ObjectCallMethod(hProcessAnalyst, “BlockUpdates”); END
IProcessAnalyst.UnBlo ckUpdates [Method]
Unblocks certain aspects of the Process Analyst’s redrawing and data updating. Defined As
[VBA] UnblockUpdates()
[Cicode] UnblockUpdates()
[C++] HRESULT UnblockUpdates()
Remarks
This method unblocks three redraw systems: redraw for the chart, the Object View, and the toolbars.
195
See Also
Data updates are also unblocked. The Process Analyst has a built-in counter to store how many times the block and unblock have been called, so that only the final UnBlockUpdates call actually unblocks the above mentioned data updates and redraw systems.
IProcessAnalyst.BlockUpdates [Method] Execution Result If the function suceeds, the return value will be Success. If the function fails, the return value will be general failure. If other BlockUpdates are in effect, a Success will be returned also (for those C++ users, S_FALSE will be returned in this case). Calling Syntax This example assumes there is a valid Process Analyst object to be passed into the example methods. [VBA] Sub Example(ProcessAnalyst As Object) ProcessAnalyst.UnblockUpdates() End Sub
[Cicode] FUNCTION Example(OBJECT hProcessAnalyst) _ObjectCallMethod(hProcessAnalyst, “UnblockUpdates”); END
IProcessAnalyst.CopyT oClipboard [Method]
Copies the data in the current viewable range for all visible pens to the clipboard. Defined As
[VBA] CopyToClipboard()
[Cicode] CopyToClipboard()
[C++] HRESULT CopyToClipboard()
Remarks The timestamp of each sample will be in local time defined by your computer. The start and end sample maybe generated for each pen to indicate the exported range of the data. Execution Result If the function succeeds the return value will be Success. If the function fails the return value will be GeneralFailure. See Also
IProcessAnalyst.CopyToFile [Method]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
196
[VBA] Sub Example() myPage_AN35.CopyToClipboard End Sub
[Cicode] Sub Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “CopyToClipboard”); End Sub
IProcessAnalyst.CopyT oFile [Method]
Saves the data in the current viewable range for all visible pens to the specified file. Defined As
[VBA] CopyToFile(filename As String)
[Cicode] CopyToFile(STRING filename)
[C++] HRESULT CopyToClipBoard(BSTR filename)
Parameters filename [in] Indicates the name and path of the file that the data will be exported to.
Execution Result If the function succeeds the return value will be Success. If the function fails the return value will be GeneralFailure. Remarks The timestamp of each sample will be in local time defined by your computer. The start and end sample maybe generated for each pen to indicate the exported range of the data. See Also
IProcessAnalyst.CopyToClipboard [Method]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() myPage_AN35.CopyToFile “test.xls” End Sub
[Cicode] Sub Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “CopyToFile”, “test.xls”); End Sub
IProcessAnalyst.Freeze Event [Method]
Enables or disables a specified event from triggering. Defined As
197
[VBA] FreezeEvent(eventName As String, freeze As Boolean)
[Cicode] FreezeEvent(STRING eventName, INT freeze)
[C++] HRESULT FreezeEvent(BSTR columnName, VARIANT_BOOL freeze)
Parameters eventName [in] Specifies the event that
you want to cease receiving notifications for.
freeze [in] Indicates
whether to enable or disable the event. True(-1) enable the event. False(0) disable the event. Execution Result If the method succeeds, the return value will be Success. If the method fails, the return value will be GeneralFailure. If eventName is bad or does not exist, the return value will be InvalidArgument. Remarks All events exposed by the Process Analyst can be enabled or disabled. This method is particularly useful to prevent recursive behavior of functions that generate the same event that you are trying to handle. Calling Syntax This example assumes there is a valid Process Analyst object to be passed into the example methods. [VBA] Sub Example(analyst As Object) analyst.FreezeEvent "HorizontalAxisChanged" True End Sub
[Cicode] FUNCTION Example(OBJECT hAnalyst) _ObjectCallMethod(hAnalyst, "FreezeEvent","HorizontalAxisChanged", -1); END
IProcessAnalyst.LoadFr omFile [Method]
Loads a specified view into the Process Analyst. Defined As
[VBA] LoadFromFile(filename As String, fileLocation As Integer)
[Cicode] LoadFromFile(STRING filename, INT fileLocation)
[C++] HRESULT LoadFromFile(BSTR filename, FileLocation fileLocation)
Parameters filename [in] Indicates
a relative path and filename of the view to load into the Process Analyst. See Remarks, below. fileLocation [in] Indicates
which known location to load the file from.
198
Execution Result If the function succeeds the return value will be Success. If the filename is invalid the return value will be InvalidArgument. If the path indicated by fileLocation is invalid or offline then the return value will be PathNotFound. If any other problem occurs then the return value will be GeneralFailure. Remarks This method will replace the current view with the one in the specified file. Absolute paths are not required for the filename as the method has been designed to load the specified file from your project directory(FileLocation_Local), my documents folder (FileLocation_User) or from the primary/secondary paths (FileLocation_Server). When a file is loaded it will be synchronized with the other locations to ensure each location has the file which is the latest. If the file you are loading is older then one which exists in another location it will be replaced. Synchronization will not occur when loaded from a Web-client. See Also
FileLocation [Enumeration], IProcessAnalyst.PrimaryPath [Property][Get/Set] , IProcessAnalyst.SecondaryPath [Property][Get/ Set]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() ‘ Load the view from the server myPage_AN35.LoadFromFile “Analyst Views\Test1.pav”, 1 End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “LoadFromFile”,“AnalystViews\Test1.pav”, 1); END
IProcessAnalyst.PrintAl l [ Method]
Displays the Print configuration dialog. Defined As
[VBA] PrintAll
[Cicode] PrintAll()
[C++] HRESULT PrintAll()
Execution Result If the function succeeds the return value will be Success. If an unexpected error occurs then return value will be GeneralFailure. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
199
[VBA] Sub Example() myPage_AN35.PrintAll End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “PrintAll”); END
IProcessAnalyst.SaveT oFile [Method]
Saves the current view using the specified name to the specified location. Defined As
[VBA] SaveToFile(filename As String, fileLocation As Integer)
[Cicode] SaveToFile(STRING filename, INT fileLocation)
[C++] HRESULT SaveToFile(BSTR filename, FileLocation fileLocation)
Parameters filename [in] Indicates
a relative path and filename which will be used during the saving of the view. See Remarks. fileLocation [in] Indicates
which known location to save the file to.
Execution Result If the function succeeds the return value will be Success. If the filename is invalid the return value will be InvalidArgument. If the path indicated by fileLocation is invalid or offline then the return value will be PathNotFound. If any other problem occurs, the return value will be GeneralFailure. Remarks On a client where the current user matches the WritePrivilegeLevel only the FileLocation_Server and FileLocation_User options will succeed. Saving using the FileLocation_Server option will save to the locations indicated by PrimaryPath and SecondaryPath properties and into the Project directory. On a client where the current user does not match the WritePrivilegeLevel only the FileLocation_User will succeed. On a webclient the FileLocation_User is the only option which will succeed. See Also
FileLocation [Enumeration], IProcessAnalyst.PrimaryPath [Property][Get/Set], IProcessAnalyst.SecondaryPath [Property][Get/Set], IProcessAnalyst.WritePrivilegeLevel [Property][Get]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
200
[VBA] Sub Example() ‘ Save the view to the server and project myPage_AN35.SaveToFile “Analyst Views\Test1.pav”, 1 End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); ‘ Save the view to the server and project _ObjectCallMethod(hProcessAnalyst, “SaveToFile”, “Analyst Views\Test1.pav”, 1); END
IProcessAnalyst.ShowP roperties [Method]
Displays the Process Analyst’s property configuration dialog. Define As
[VBA] ShowProperties
[Cicode] ShowProperties()
[C++] HRESULT ShowProperties ()
Execution Result If the function succeeds the return value will be Success. If an unexpected error occurs then the return value will be GeneralFailure. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() myPage_AN35.ShowProperties End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “ShowProperties”); END
IProcessAnalyst.Subscr ibeForPropertyChange [Method]
Use this method to receive notifications of when a particular property changes. Notifications will be sent via the PropertyChanged event. Defined As
[VBA] SubscribeForPropertyChange(interfaceName As String, propertyName As String)
[Cicode] SubscribeForPropertyChange(STRING interfaceName, STRING propertyName)
[C++] HRESULT SubscribeForPropertyChange(BSTR interfaceName, BSTR propertyName)
Parameters
201
interfaceName [in] Specify
the name of the interface that the property you want notifications for is defined on. propertyName [in] This is the
name of the property you want to receive notifications for.
Execution Result If the function succeeds, the return value will be Success. If the interfaceN ame or propertyName is a bad string, the return value will be InvalidArgument. If any other problem occurs, the return value will be GeneralFailure. Remarks The following set of properties are supported:
See Also
Interface name
Property Name
IProcessAnalyst
AutoScroll
IProcessAnalyst
BackgroundColor
IProcessAnalyst
ContextMenu
IProcessAnalyst
LockedPens
IProcessAnalyst
DisplayRefreshRate
IProcessAnalyst
DataRequestRate
IProcessAnalyst
ZoomMode
IProcessAnalyst.UnsubscribePropertyChange [Method], PropertyChanged [Event]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() myPage_AN35.SubscribeForPropertyChange “IProcessAnalyst”, “ZoomMode” End Sub
[Cicode] Sub Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst,“SubscribeForPropertyChange”, “IProcessAnalyst”, “ZoomMode”); End Sub
IProcessAnalyst.Synchr oniseToNow [Method]
Synchronizes all pens such that the date/time reflects “Now.” Defined As
[VBA] SynchroniseToNow
[Cicode] SynchroniseToNow()
[C++] HRESULT SynchroniseToNow()
Execution Result
202
If the function succeeds, the return value will be Success. If any other problem occurs, the return value will be GeneralFailure. Remarks The current span for each pen will be maintained. ‘Now’ is defined as the current time on the client machine. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() myPage_AN35.SynchroniseToNow End Sub
[Cicode] Sub Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “SynchroniseToNow”); End Sub
IProcessAnalyst.Unsub scribePropertyChange [Method]
Use this method to cancel notifications of when the specified property changes. Notifications will cease to be sent via the PropertyChanged event. Defined As
[VBA] UnsubscribePropertyChange(interfaceName As String, propertyName As String)
[Cicode] UnsubscribePropertyChange(STRING interfaceName, STRING propertyName)
[C++] HRESULT UnsubscribePropertyChange(BSTR interfaceName, BSTR propertyName)
Parameters interfaceName [in] Name
of the interface that the property you want to remove notifications for is defined on. propertyName [in] Name of the property you want to
remove notifications for.
Execution Result If the function succeeds, the return value will be Success. If the interfaceN ame or propertyName is a bad string, the return value will be InvalidArgument. If any other problem occurs, the return value will be GeneralFailure. See Also
IProcessAnalyst.SubscribeForPropertyChange [Method], PropertyChanged [Event]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
203
[VBA] Sub Example() myPage_AN35.UnsubscribePropertyChange “IProcessAnalyst”,“ZoomMode” End Sub
[Cicode] Sub Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); _ObjectCallMethod(hProcessAnalyst, “UnsubscribePropertyChange”,“IProcessAnalyst”, “ZoomMode”); End Sub
IProcessAnalyst.Admin PrivilegeLevel [Property] [ Get]
Retrieves the privilege level currently set for controlling administration features of the Process Analyst at Run-time. Defined As
[VBA] Integer AdminPrivilegeLevel
[Cicode] INT AdminPrivilegeLevel
[C++] short AdminPrivilegeLevel
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Remarks By default the level is 0 (Zero), which allows access to all features at run time. Setting this to any other level will require the operator viewing the Process Analyst to have a privilege equal to that level. This property can only be set at design time (in the Graphics Builder property pages) and is recommended to prevent Operators from changing performance properties such as DataRequestRate and DisplayRefreshRate. Limits Privilege level defined in Vijeo Citect 1 - 8. 0 = no security. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim privilege As Boolean ‘Getting Property value privilege = myPage_AN35.AdminPrivilegeLevel End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT privilege; // Getting current property value
204
privilege = _ObjectGetProperty(hProcessAnalyst, “AdminPrivilegeLevel”); END
IProcessAnalyst.AutoS croll [Property][Get/Set]
Gets or Sets the automatic scrolling of all pens as time passes. Defined As
[VBA] Boolean AutoScroll
[Cicode] INT AutoScroll
[C++] VARIANT_BOOL AutoScroll
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks This function does not synchronize the pens to now. The display will be updated according to the value of the DisplayRefreshRate property. Limits
True (-1): Autoscroll is On
False (0): Autoscroll is Off
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim autoScroll As Boolean ‘Getting Property value autoScroll = myPage_AN35.AutoScroll ‘Setting Property value myPage_AN35.AutoScroll = True End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT autoScroll; // Getting current property value autoScroll = _ObjectGetProperty(hProcessAnalyst, “AutoScroll”); // Setting Property to true _ObjectSetProperty(hProcessAnalyst, “AutoScroll”, -1); END
IProcessAnalyst.Backgr oundColor [Property][Get/Set]
Gets or sets the background color for the Process Analyst. Defined As
[VBA] Long BackgroundColor
[Cicode] INT BackgroundColor
205
[C++] OLECOLOR BackgroundColor
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The background is the area under the panes. To calculate the integer value required for a color, apply the following formula: (65536 * Blue) + (256 * Green) + (Red) where Red, Green, and Blue are 0-255. Limits
True (-1): Context menu is enabled
False (0): Context menu is disabled
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim backgroundColor As Long ‘Getting Property value backgroundColor = myPage_AN35.BackgroundColor ‘Setting Property value to Red myPage_AN35.BackgroundColor = 255 End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT backgroundColor; // Getting current property value backgroundColor = _ObjectGetProperty(hProcessAnalyst,“BackgroundColor”); // Setting Property to Red _ObjectSetProperty(hProcessAnalyst, “BackgroundColor”, 255); END
IProcessAnalyst.Comm andSystem [Property][Get]
Gets a reference to the Process Analyst’s Command System object. With this object you can execute commands, query command information, and create your own custom commands. Defined As
[VBA] Object CommandSystem
[Cicode] OBJECT CommandSystem
[C++] ICommandSystem* CommandSystem
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument.
206
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim commandSystem As Object ‘Retrieve command system Set commandSystem = myPage_AN35.CommandSystem End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT hCommandSystem; // Retrieve command system hCommandSystem = _ObjectGetProperty(hProcessAnalyst, “CommandSystem”); END
IProcessAnalyst.Contex tMenu [Property][Get/ Set]
Enables or disables the context menu which is displayed at Run-time when an operator clicks the right mouse button on the graphical display. Defines As
[VBA] Boolean ContextMenu
[Cicode] INT ContextMenu
[C++] VARIANT_BOOL ContextMenu
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim contextMenu As Boolean ‘Getting Property value contextMenu = myPage_AN35.ContextMenu ‘Disable the context menu myPage_AN35.ContextMenu = False End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT contextMenu; // Getting current property value contextMenu =_ObjectGetProperty(hProcessAnalyst,“ContextMenu”); // Disable the context menu _ObjectSetProperty(hProcessAnalyst, “ContextMenu”, 0); END
207
IProcessAnalyst.Cursor s [Property][Get]
Gets a reference to the Process Analyst’s cursors collection. With this object you can create new, and browse existing cursors. Defined As
[VBA] Object Cursors
[Cicode] OBJECT Cursors
[C++] ICursors* Cursors
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim cursors As Object ‘Retrieve cursors collection Set cursors = myPage_AN35.Cursors End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT hCursors; // Retrieve cursor collection hCursors = _ObjectGetProperty(hProcessAnalyst, “Cursors”); END
IProcessAnalyst.DataRe questRate [Property][Get/Set]
Indicates how often (in milliseconds) the Process Analyst Control will request data from the trend server(s). Internally the Process Analyst will choose the most optimum request rate for data, but this property can be used to slow the request down further. Defined As
[VBA] Integer DataRequestRate
[Cicode] INT DataReqestRate
[C++] short DataRequestRate
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Remarks This property is useful for controlling the load on a trend server. The higher the figure the less load will be put on the trend server(s). Limits
Minimum = 10 milliseconds
208
Maximum = 60000 milliseconds (1 minute)
Default = 1000 milliseconds (1 second)
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim requestRate As Integer ‘Retrieve request rate requestRate = myPage_AN35.DataRequestRate ‘Set request rate myPage_AN35.DataRequestRate = 2000 End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT requestRate; // Retrieve property value requestRate = _ObjectGetProperty(hProcessAnalyst, “DataRequestRate”); // Set property value to 2 seconds _ObjectSetProperty(hProcessAnalyst, “DataRequestRate”, 2000); END
IProcessAnalyst.Displa yRefreshRate [Property][Get/Set]
Indicates how fast the Process Analyst Control display is updated in milliseconds. The default is an update of 1 second, which provides optimum client performance and visual feedback. Defined As
[VBA] Integer DisplayRefreshRate
[Cicode] INT DisplayRefreshRate
[C++] short DisplayRefreshRate
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks This property is useful for controlling the performance of a client (CPU usage). Limits
Minimum = 10 milliseconds (most machines will not be fast enough to keep up).
Maximum = 60000 milliseconds (1 minute).
Default = 1000 milliseconds (1 second).
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
209
[VBA] Sub Example() Dim requestRate As Integer ‘Retrieve request rate requestRate = myPage_AN35.DisplayRefreshRate ‘Set request rate myPage_AN35.DisplayRefreshRate = 2000 End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT requestRate; // Retrieve request rate requestRate = _ObjectGetProperty(hProcessAnalyst, “DisplayRefreshRate”); // Set request rate _ObjectSetProperty(hProcessAnalyst, “DisplayRefreshRate”, 2000); END
IProcessAnalyst.Langu age [Property] [Get/Set]
This function allows dynamic changing of the user interface to the language specified. Defined As
[VBA] String Language
[Cicode] STRING Language
[C++] BSTR Language
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks To change languages you must have additional localized resource .dll files alongside the main resources.dll file. Additional language .dll files are named (and should be named) using the format “Resources_.dll”. The Process Analyst expects this format or the language will not be loaded. For example, if you have a Chinese resource dll named “Resources_zh-CN.dll”, set the Language property to “zh-CN”. The .dll files are named according to the RFC 1766 standard for specifying culture names. Specifying “.” resets the language back to the default. Note: This method is not required to be called if you are using Vijeo Citect’s multilanguage feature to make the Process Analyst switch languages. For details, see Multi-language Support. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”.
210
[VBA] Sub Example() Dim language As String ‘Retrieve current language language = myPage_AN35.Language ‘Set language to Japanese myPage_AN35.Language = “ja-JP” End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); STRING language; // Retrieve current language language = _ObjectGetProperty(hProcessAnalyst, “Language”); // Set language to Japanese _ObjectSetProperty(hProcessAnalyst, “Language”, “ja-JP”); END
IProcessAnalyst.LastSe lectedPen [Property][Get]
Retrieves the last selected pen on the Process Analyst. Defined As
[VBA] Object LastSelectedPen
[Cicode] OBJECT LastSelectedPen
[C++] IPen* LastSelectedPen
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Remarks The last selected pen is also referred to as the “primary” selection. If there are no pens in the view, an invalid object will be returned. Limits
A reference to the primary selected pen.
Invalid object when there are no pens on the display.
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim selectedPen As Object ‘Retrieve primary selection Set selectedPen = myPage_AN35.LastSelectedPen End Sub
211
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT selectedPen; // Retrieve primary selection selectedPen = _ObjectGetProperty(hProcessAnalyst, “LastSelectedPen”); END
IProcessAnalyst.Locke dPens [Property][Get/ Set]
Determines whether all the pens across all panes in the Process Analyst control are locked together. Defined As
[VBA] Boolean LockedPens
[Cicode] INT LockedPens
[C++] VARIANT_BOOL LockedPens
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Remarks While this property is enabled, any operation applied to the selected pen is applied to all pens. When the property is disabled, the pens will lose the lock logic, and any interaction technique will apply to the individual pen with selection focus. If this property is disabled and then enabled, all pens assume the same scale, timespan, and end time position as the selected pen. Limits
True (-1): Pens are locked.
False (0): Pens are unlocked.
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim locked As Boolean ‘Get current locked status locked = myPage_AN35.LockedPens ‘Turn off locked Pens myPage_AN35.LockedPens = False End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT lockedPens; // Get current locked status lockedPens = _ObjectGetProperty(hProcessAnalyst, “LockedPens”);
212
// Turn off locked Pens _ObjectSetProperty(hProcessAnalyst, “LockedPens”, 0); END
IProcessAnalyst.Object View [Property][Get]
Gets a reference to the ObjectView object. With this object you can manipulate the look of the ObjectView. Defined As
[VBA] Object ObjectView
[Cicode] OBJECT ObjectView
[C++] IObjectView* ObjectView
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim objectView As Object ‘Retrieve the objectview Set objectView = myPage_AN35.ObjectView End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT objectView; // Retrieve the objectview objectView = _ObjectGetProperty(hProcessAnalyst, “ObjectView”); END
IProcessAnalyst.Numbe rofSamples[Property][G et/Set]
Specifies the date/time axis span of each pen in number of samples. More or less detail for each pen can be displayed by increasing or decreasing the value of this property respectively. Note: The value entered into the Number of Samples box in the Process Analyst Properties dialog box is closely tied to the display resolution. The default setting is ideal for screen resolutions from 1024x768 to 1280x1024. The association between Number of Samples and the display resolution occurs because for each sample shown on screen the Process Analyst attempts to leave a small gap to allow for sample markers. Because the Process Analyst shows samples when they occur, it requires less data than a traditional trend client. Retrieving d ata is expensive and the more data you retrieve the more time the request takes. It is recommended that this parameter not exceed 500 . Defined As
[VBA] Integer NumberofSamples
[Cicode] INT NumberofSamples
213
[C++] short NumberofSamples
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks This property is useful for controlling the performance of a client. (CPU usage). By dividing a pen’s time span by the value of this property, you can calculate the current display period of the pen. The Process Analyst w ill only display a maximum of one sample per display period. See Data Compaction for details. Limits
See Also
Minimum = 10
Maximum = 5000
Default = 300
Exporting Pen Data Calling Syntax Assumes you have a page called "myPage" and the Process Analyst has been named "AN35". [VBA] Sub Example() Dim numOfSamples As Integer `Retrieve number of samples numOfSamples = myPage_AN35.NumberOfSamples `Set request rate myPage_AN35.NumberOfSamples = numOfSamples End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName("AN35"); INT numOfSamples; // Retrieve number of samples numOfSamples = _ObjectGetProperty(hProcessAnalyst, "NumberOfSamples"); // Set request rate _ObjectSetProperty(hProcessAnalyst, "NumberOfSamples", 500); END
IProcessAnalyst.Panes [Property][Get]
Gets a reference to the Panes collection. With this object you can create new, and browse existing panes. Defined As
[VBA] Object Panes
[Cicode] OBJECT Panes
[C++] IPanes* Panes
Execution Result
214
If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim panes As Object ‘Retrieve the panes collection Set panes = myPage_AN35.Panes End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT panes; // Retrieve the panes collection panes = _ObjectGetProperty(hProcessAnalyst, “Panes”); END
IProcessAnalyst.Primar yPath [Property][Get/ Set]
Specifies the primary location for saving and loading Process Analyst views. Defined As
[VBA] String PrimaryPath
[Cicode] STRING PrimaryPath
[C++] BSTR PrimaryPath
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The primary and secondary path properties together provide a file redundancy option for large systems that need to store Process Analyst Views in a shared location. Whenever a load operation occurs from either of these locations, the loaded file will be synchronized with each location, such that the latest version of the file appears in both locations. See Also
IProcessAnalyst.SecondaryPath [Property][Get/Set], IProcessAnalyst.LoadFromFile [Method], IProcessAnalyst.SaveToFile [Method]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim path As String ‘Retrieve the path path = myPage_AN35.PrimaryPath
215
‘Set the path myPage_AN35.PrimaryPath = “\\computer1\PA Views” End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); STRING path; // Retrieve the path path = _ObjectGetProperty(hProcessAnalyst, “PrimaryPath”); // Set the path _ObjectSetProperty(hProcessAnalyst, “PrimaryPath”, “\\computer1\PA Views”); END
IProcessAnalyst.Secon daryPath [Property][Get/Set]
Specifies the secondary location for saving and loading Process Analyst views. Defined As
[VBA] String SecondaryPath
[Cicode] STRING SecondaryPath
[C++] BSTR SecondaryPath
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks The secondary and primary path properties together provide a file redundancy option for large systems that need to store Process Analyst Views in a shared location. Whenever a load operation occurs from either of these locations, the loaded file will be synchronized with each location, such that the latest version of the file appears in both locations. See Also
IProcessAnalyst.LoadFromFile [Method], IProcessAnalyst.PrimaryPath [Property][Get/Set], IProcessAnalyst.SaveToFile [Method]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim path As String ‘Retrieve the path path = myPage_AN35.PrimaryPath ‘Set the path myPage_AN35.SecondaryPath = “\\computer1\PA Views” End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); STRING path; // Retrieve the path
216
path = _ObjectGetProperty(hProcessAnalyst, “SecondaryPath”); // Set the path _ObjectSetProperty(hProcessAnalyst, “SecondaryPath”, “\\computer1\PA Views”); END
IProcessAnalyst.Toolba rs [ Property][Get]
Gets a reference to the Toolbars collection. With this object you can browse and modify existing toolbars. Defined As
[VBA] Object Toolbars
[Cicode] OBJECT Toolbars
[C++] IToolbars* Toolbars
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim toolbars As Object ‘Retrieve the toolbars collection Set toolbars = myPage_AN35.Toolbars End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); OBJECT toolbars; // Retrieve the toolbars collection toolbars = _ObjectGetProperty(hProcessAnalyst, “Toolbars”); END
IProcessAnalyst.WriteP rivilegeLevel [Property][Get]
Returns the privilege level required to save Process Analyst views to the Primary and Secondary paths. Defined As
[VBA] Integer WritePrivilegeLevel
[Cicode] INT WritePrivilegeLevel
[C++] short WritePrivilegeLevel
Execution Result If the property get succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. Remarks The privilege cannot be set via automation. It must be set in the property pages at design time (for example, in Graphics Builder).
217
See Also
IProcessAnalyst.SaveToFile [Method], IProcessAnalyst.PrimaryPath [Property][Get/Set], IProcessAnalyst.SecondaryPath [Property][Get/Set]
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim privilege As Integer ‘Retrieve the privilege privilege = myPage_AN35.WritePrivilegeLevel End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INTEGER privilege; // Retrieve the privilege privilege = _ObjectGetProperty(hProcessAnalyst, “WritePrivilegeLevel”); END
IProcessAnalyst.Zoom Mode [Property][Get/ Set]
Enables or disables the box zooming mode for the Process Analyst. Defined As
[VBA] Boolean ZoomMode
[Cicode] INT ZoomMode
[C++] VARIANT_BOOL ZoomMode
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Remarks Setting this mode will ensure only box zooming operations can occur; all other operations such as interactive scrolling and scaling will cease. Limits
True (-1): Enable zoom mode.
False (0): Disable zoom mode.
Calling Syntax Assumes you have a page called “myPage” and the Process Analyst has been named “AN35”. [VBA] Sub Example() Dim zoomMode As Boolean ‘Retrieve the mode zoomMode = myPage_AN35.ZoomMode
218
‘Set the path myPage_AN35.ZoomMode = True End Sub
[Cicode] FUNCTION Example() OBJECT hProcessAnalyst = ObjectByName(“AN35”); INT zoomMode; // Retrieve the zoomMode zoomMode = _ObjectGetProperty(hProcessAnalyst, “ZoomMode”); // Set the zoomMode _ObjectSetProperty(hProcessAnalyst, “ZoomMode”, -1); END
MouseDoubleClick [Event]
This event is raised whenever a mouse double-click occurs on the graphical chart area of the Process Analyst. Defined As [VBA] MouseDoubleClick(pen As Object, button As Integer)
[Cicode] MouseDoubleClick(OBJECT processAnalyst, OBJECT pen, INT button)
[C++] MouseDoubleClick(IPen pen, int button)
Parameters pen [in] Indicates
which pen the double-click occurred on. This object will be invalid if no pen was double-clicked. button [in] Indicates
which button was double-clicked: 0 = Left, 1 = Right.
processAnalyst [in] Indicates the Process Analyst object that raised the event (Cicode only).
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_MouseDoubleClick(pen As Object, button As Integer) End Sub
[Cicode] FUNCTION myPage_AN35_MouseDoubleClick(OBJECT processAnalyst, OBJECT pen, INT button) END
MouseClick [Event]
This event is raised whenever a single mouse click occurs on the graphical chart area of the Process Analyst. Defined As
[VBA] MouseClick(pen As Object, button As Integer)
[Cicode] MouseClick(OBJECT processAnalyst, OBJECT pen, INT button)
219
[C++] MouseClick(IPen* pen, int button)
Parameters pen [in] Indicates
which pen the click occurred on. This object will be invalid if no pen was clicked. button [in] Indicates
which button was clicked: 0 = Left, 1 = Right.
processAnalyst [in] Indicates the Process Analyst object that raised the event (Cicode only).
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_MouseClick(pen As Object, button As Integer) End Sub
[Cicode] FUNCTION myPage_AN35_MouseClick(OBJECT processAnalyst, OBJECT pen, INT button) END
PenCreated [Event]
This event is raised whenever a pen is either created via the automation model, or added through the Add Pen dialog at run time. Defined As
[VBA] PenCreated(pen As Object)
[Cicode] PenCreated(OBJECT processAnalyst, OBJECT pen)
[C++] PenCreated(IPen* pen)
Parameters pen [in] Refers
to the pen that was created.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only). Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_PenCreated(pen As Object) End Sub
[Cicode] FUNCTION myPage_AN35_PenCreated(OBJECT processAnalyst, OBJECT pen) END
220
PenDeleted [Event]
This event is raised whenever a pen is deleted either by automation or via the interface. Defined As
[VBA] PenDeleted(penName As String)
[Cicode] PenDeleted(OBJECT processAnalyst, STRING penName)
[C++] PenDeleted(BSTR penName)
Parameters penName [in] Contains
the name of the pen that was deleted.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35 [VBA] Sub myPage_AN35_PenDeleted(penName As String) End Sub
[Cicode] FUNCTION myPage_AN35_PenDeleted(OBJECT processAnalyst, STRING penName) END
PenRenamed [Event]
This event is raised whenever a pen is renamed via automation or through the user interface. Defined As
[VBA] PenRenamed(pen As Object)
[Cicode] PenRenamed(OBJECT processAnalyst, OBJECT pen)
[C++] PenRenamed(IPen* pen)
Parameters pen [in] Refers
to the pen that was renamed.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only). Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35.
221
[VBA] Sub myPage_AN35_PenRenamed(pen As Object) End Sub
[Cicode] FUNCTION myPage_AN35_PenRenamed(OBJECT processAnalyst, OBJECT pen) END
PenSelectionChanged [Event]
This event is raised whenever the selection changes in the Process Analyst. Defined As
[VBA] PenSelectionChanged (pen As Object)
[Cicode] PenSelectionChanged (OBJECT processAnalyst, OBJECT pen)
[C++] PenSelectionChanged (IPen* pen)
Parameters pen [in] Refers to the pen that now has primary selection. This maybe invalid if
the last pen was deleted from the view. processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Remarks Selection can change via user interaction (such as clicking on pens, deleting/ adding pens) and automation. Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_PenSelectionChanged(pen As Object) End Sub
[Cicode] FUNCTION myPage_AN35_PenSelectionChanged(OBJECT processAnalyst, OBJECT pen) END
HorizontalAxisChanged [Event]
This event is raised when the date/time axis position or scale of a pen is changed. Defined As
[VBA] HorizontalAxisChanged(pen As Object)
[Cicode] HorizontalAxisChanged(OBJECT processAnalyst, OBJECT pen)
[C++] HorizontalAxisChanged(IPen* pen)
Parameters pen
222
[in] Refers
to the pen that has changed. This will be invalid if pens are
locked. processAnalyst [in] Indicates the Process Analyst object that raised the event (Cicode only).
Remarks When the LockedPens property is True, this event is fired only once with the pen parameter marked as invalid. See Also
IProcessAnalyst.LockedPens [Property][Get/Set] , VerticalAxisChanged [Event]
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as AN35_E. [VBA] Sub AN35_E_HorizontalAxisChanged (pen As Object) End Sub
[Cicode] FUNCTION AN35_E_HorizontalAxisChanged (OBJECT processAnalyst, OBJECT pen) END
VerticalAxisChanged [Event]
This event is raised whenever the vertical axis position or scale of a pen is changed. Defined As
[VBA] VerticalAxisChanged(pen As Object)
[Cicode] VerticalAxisChanged(OBJECT processAnalyst, OBJECT pen)
[C++] VerticalAxisChanged(IPen* pen)
Parameters pen [in] Refers
to the pen that has changed.
processAnalyst
[in] Indicates the Process Analyst object which raised the event. (Cicode only) See Also
HorizontalAxisChanged [Event]
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_VerticalAxisChanged (pen As Object) End Sub
223
[Cicode] FUNCTION myPage_AN35_VerticalAxisChanged (OBJECT processAnalyst, OBJECT pen) END
CursorMoved [Event]
This event is raised whenever the cursor position changes. Defined As
[VBA] CursorMoved(cursor As Object, position As Integer)
[Cicode] CursorMoved (OBJECT processAnalyst, OBJECT cursor, INT position)
[C++] CursorMoved (IPen* pen, int position)
Parameters cursor [in] Refers
to the cursor that has moved.
position [in] Indicates the new
position of the cursor.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only). Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_CursorMoved(pen As Object, position As Integer) End Sub
[Cicode] FUNCTION myPage_AN35_CursorMoved(OBJECT processAnalyst, OBJECT cursor, INT position) END
Error [Event]
This event is raised whenever an error is generated from the Process Analyst. Defined As
[VBA] Error(errorCode As Integer, errorMessage As String)
[Cicode] Error(OBJECT processAnalyst, INT errorCode, STRING errorMessage)
[C++] Error(ErrorNotifyCode errorCode, BSTR errorMessage)
Parameters errorCode [in] Indicates
the error that occurred. See the ErrorNotifyCode
enumeration. errorMessage [in] Contains
the message associated with the error code.
224
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) See Also
ErrorNotifyCode [Enumeration]
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_Error(errorCode As Integer, errorMessage As String) End Sub
[Cicode] FUNCTION myPage_AN35_Error(OBJECT processAnalyst, INT errorCode, STRING errorMessage) END
PropertyChanged [Event]
This event is raised whenever a property that has been subscribed to has changed. Defined As
[VBA] PropertyChanged(interfaceName As String, propertyName As String)
[Cicode] PropertyChanged (OBJECT processAnalyst, STRING interfaceName, STRING propertyName)
[C++] PropertyChanged (BSTR interfaceName, BSTR propertyName)
Parameters interfaceName [in] Indicates
which interface the property which has changed belongs to.
propertyName [in] Indicates
which property has changed.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Remarks For this event to be raised you must subscribe to one or more properties. See Also
IProcessAnalyst.SubscribeForPropertyChange [Method] , IProcessAnalyst.UnsubscribePropertyChange [Method]
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_PropertyChanged(interfaceName As String, propertyName As String) End Sub
225
[Cicode] FUNCTION myPage_AN35_PropertyChanged(OBJECT processAnalyst, STRING interfaceName, STRING propertyName) END
OVItemAdded [Event]
This event is raised whenever an item is added to the ObjectView. Defined As
[VBA] OVItemAdded(item As Object)
[Cicode] OVItemAdded (OBJECT processAnalyst, OBJECT item)
[C++] OVItemAdded (IObjectViewItem* item)
Parameters item [in] A reference to
the item that was added to the ObjectView.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_OVItemAdded(item As Object) End Sub
[Cicode] FUNCTION myPage_AN35_OVItemAdded(OBJECT processAnalyst, OBJECT item) END
OVItemRemoved [Event]
This event is raised whenever an item is added to the ObjectView. Defined As
[VBA] OVItemRemoved(item As Object)
[Cicode] OVItemRemoved(OBJECT processAnalyst, OBJECT item)
[C++] OVItemRemoved(IObjectViewItem* item)
Parameters item [in] A reference to
the item that was removed from the ObjectView.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35.
226
[VBA] Sub myPage_AN35_OVItemRemoved(item As Object) End Sub
[Cicode] FUNCTION myPage_AN35_OVItemRemoved(OBJECT processAnalyst, OBJECT item) END
OVItemSelected [Event]
This event is raised whenever an item is selected in the ObjectView. Defined As
[VBA] OVItemSelected(item As Object)
[Cicode] OVItemSelected(OBJECT processAnalyst, OBJECT item)
[C++] OVItemSelected(IObjectViewItem* item)
Parameters item [in] A reference to
the item that was selected in the ObjectView.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_OVItemSelected(item As Object) End Sub
[Cicode] FUNCTION myPage_AN35_OVItemSelected(OBJECT processAnalyst, OBJECT item) END
OVItemChecked [Event]
This event is raised whenever an item is checked in the ObjectView. Defined As
[VBA] OVItemChecked(item As Object)
[Cicode] OVItemChecked(OBJECT processAnalyst, OBJECT item)
[C++] OVItemChecked(IObjectViewItem* item)
Parameters item [in] A reference to
the item that was checked in the ObjectView.
processAnalyst [in] Indicates
only)
the Process Analyst object which raised the event. (Cicode
227
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_OVItemChecked(item As Object) End Sub
[Cicode] FUNCTION myPage_AN35_OVItemChecked(OBJECT processAnalyst, OBJECT item) END
OVColumnAdded [Event]
This event is raised whenever a column is added to the ObjectView. Defined As
[VBA] OVColumnAdded(name As String)
[Cicode] OVColumnAdded(OBJECT processAnalyst, STRING name)
[C++] OVColumnAdded(BSTR name)
Parameters item [in] The
name of the column that has been added
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_OVColumnAdded(name As String) End Sub
[Cicode] FUNCTION myPage_AN35_OVColumnAdded(OBJECT processAnalyst, STRING name) END
OVColumnRemoved [Event]
This event is raised whenever a column is removed to the ObjectView. Defined As
[VBA] OVColumnRemoved(name As String)
[Cicode] OVColumnRemoved(OBJECT processAnalyst, STRING name)
[C++] OVColumnRemoved(BSTR name)
Parameters item [in] The
name of the column that has been removed.
228
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_OVColumnRemoved(name As String) End Sub
[Cicode] FUNCTION myPage_AN35_OVColumnRemoved(OBJECT processAnalyst, STRING name) END
CommandExecuted [Event]
This event is raised when a command is executed. Defined As
[VBA] CommandExecuted(commandId As String)
[Cicode] CommandExecuted (OBJECT processAnalyst, STRING commandId)
[C++] CommandExecuted (BSTR commandId)
Parameters commandId [in] Contains
the unique identifier of the command that was executed.
processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Remarks Each toolbar button is associated with a command so when they are pressed this event will be raised with the unique identifier of that command. You can then use that identifier to determine which command was executed. By using this event you can implement your own custom commands. See Also
UpdateCommand [Event] , ICommandSystem.Execute [Method]
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_CommandExecuted(commandId As String) End Sub
[Cicode] FUNCTION myPage_AN35_CommandExecuted(OBJECT processAnalyst, STRING commandId) END
229
UpdateCommand [Event]
This event is raised whenever the Process Analyst needs to refresh the state of its toolbars. Defined As
[VBA] UpdateCommand(commandId As String)
[Cicode] UpdateCommand(OBJECT processAnalyst, STRING commandId)
[C++] UpdateCommand(BSTR commandId)
Parameters commandId [in] Contains
the unique identifier of the command that needs to be
refreshed. processAnalyst [in] Indicates
the Process Analyst object which raised the event. (Cicode
only) Remarks This event is only raised for custom commands. You should use this event as an opportunity to update the enable and/or the pressed state of the toolbar button associated with the command. This event will be raised frequently so you should limit the amount of code executed in response to this event. An Update will be triggered in at least the following scenarios:
Selection changes
Command execution
Calling Syntax Assumes you have a Process Analyst on a page with an event class defined as myPage_AN35. [VBA] Sub myPage_AN35_UpdateCommand(commandId As Integer) End Sub
[Cicode] FUNCTION myPage_AN35_UpdateCommand(OBJECT processAnalyst, INT commandId) END
AlarmType [Enumeration]
Specifies the visual representation for an alarm pen. Defined As
[VBA] Integer
[Cicode] INT
[C++] AlarmType
230
Members
See Also
AxisLabelType [Enumeration]
Member Name
Description
Value
AlarmType_Digital
The tag is digital alarm
0
AlarmType_Analog
The tag is an analog alarm
1
AlarmType_Advanced
The tag is an advanced alarm
2
AlarmType_TimeStamped
The tag is a time-stamped alarm
3
AlarmType_MultiDigital
The tag is a multi-digital alarm
4
AlarmType_ArgyleAnalog
The tag is a legacy Argyle analog alarm 5
AlarmType_TimeStampedDigital
The tag is a digital time-stamped alarm
AlarmType_TimeStampedAnalog
The tag is a analog time-stamped alarm 7
6
IAlarmPen.AlarmType [Property][Get/Set]
Specifies how the labels are drawn on the vertical axis. Defined As
[VBA] Integer
[Cicode] INT
[C++] AxisLabelType
Members Member Name
Description
Value
AxisLabelType_NONE
No labels will be visible on axis
0
AxisLabelType_DOUBLE
Displays in decimal format
1
AxisLabelType_INTEGER
Displays in integer format
2
AxisLabelType_PERCENT
Displays as “%”
3
AxisLabelType_AMPS
Displays as “A”
4
AxisLabelType_DEGREES
Displays as “deg”
5
AxisLabelType_FEET
Displays as “ft”
6
AxisLabelType_FEETPERMIN
Displays as “ft/min”
7
AxisLabelType_FEETPERSEC
Displays as “ft/s”
8
AxisLabelType_GALLONS
Displays as “gal”
9
AxisLabelType_GALLONSPERHR
Displays as “gal/h”
10
AxisLabelType_GALLONSPERMIN
Displays as “gal/min”
11
AxisLabelType_GALLONSPERSEC
Displays as “gal/s”
12
AxisLabelType_HERTZ
Displays as “Hz”
13
AxisLabelType_KILOGRAMS
Displays as “kg”
14
AxisLabelType_KILOGRAMSPERHR
Displays as “kg/h”
15
AxisLabelType_KILOGRAMSPERMIN
Displays as “kg/min”
16
AxisLabelType_KILOGRAMSPERSEC
Displays as “kg/s”
17
AxisLabelType_KILOMETRESPERHR
Displays as “kg/h”
18
AxisLabelType_KILOPASCALS
Displays as “kPa”
19
AxisLabelType_KILOWATTS
Displays as “kW”
20
AxisLabelType_LITRES
Displays as “l”
21
AxisLabelType_LITRESPERHR
Displays as “l/h”
22
AxisLabelType_LITRESPERMIN
Displays as “l/min”
23
AxisLabelType_LITRESPERSEC
Displays as “l/s”
24
231
LineStyle [Enumeration]
Member Name
Description
Value
AxisLabelType_METRES
Displays as “m”
25
AxisLabelType_METRESPERMIN
Displays as “m/min”
26
AxisLabelType_METRESPERSEC
Displays as “m/s”
27
AxisLabelType_REVS
Displays as “Rev”
28
AxisLabelType_REVSPERHR
Displays as “Rev/h”
29
AxisLabelType_REVSPERMIN
Displays as “RPM”
30
AxisLabelType_TONNES
Displays as “t”
31
AxisLabelType_TONNESPERHR
Displays as “t/h”
32
AxisLabelType_VOLTS
Displays as “V”
33
AxisLabelType_WATTS
Displays as “W”
34
AxisLabelType_LOOKUP
Displays user-defined text for label 35
Defines the drawing style for a line. Defined As
[VBA] Integer
[Cicode] INT
[C++] LineStyle
Values
HatchStyle [Enumeration]
Member Name
Description
Value
LineStyle_SOLID
Draws a solid line (all line widths)
0
LineStyle_DASH
Draws a dashed line (line width 1 only)
1
LineStyle_DOT
Draws a dot line (line width 1 only)
2
LineStyle_DASHDOT
Draws a dash dot (line width 1 only)
3
LineStyle_DASHDOTDOT
Draws a dash dot dot (line width 1 only)
4
LineStyle_NONE
Draws no line
5
Defines the filling style for Alarm pens. Defined As
[VBA] Integer
[Cicode] INT
[C++] HatchStyle
Members
See Also
Member Name
Description
Value
HatchStyle_None
No pattern
0
HatchStyle_Horizontal
Horizontal line pattern
1
HatchStyle_Vertical
Vertical line pattern
2
HatchStyle_ForwardDiagonal
Forward diagonal line pattern
3
HatchStyle_BackwardDiagonal
Backward diagonal line pattern
4
HatchStyle_Cross
Cross pattern
5
HatchStyle_DiagonalCross
Diagonal cross pattern
6
IAlarmPen.SetHatchStyle [Method] , IAlarmPen.GetHatchStyle [Method]
232
Defines how the pen name will be generated. It is used in conjunction with the IPens.Create method.
PenNameMode [Enumeration]
Defined As
[VBA] Integer
[Cicode] INT
[C++] PenNameMode
Members
See Also
PenType [Enumeration]
Member Name
Description
Value
PenNameMode_Comment
The comment field obtained from the Vijeo Citect trend/alarmtag 1 will be used as the pen name.
PenNameMode_Tag
The value of the IPen.DataPoint property will be used as the pen 2 name.
PenNameMode_Custom
Indicates that you will be setting the name using the IPen.Name 3 property.
IPens.Create [Method], IPen.DataPoint [Property][Get/Set], IPen.Name [Property][Get/Set]
Defines the plotting style of a Process Analyst pen. Defined As
[VBA] Integer
[Cicode] INT
[C++] PenType
Members
See Also
PointType [Enumeration]
Member Name
Description
Value
PenType_ANALOG
A pen with an analog range
4097
PenType_DIGITAL
A pen with a range of 0 and 1
4098
PenType_ALARM
A pen represented as states
4099
IPens.Create [Method]
Defines the visual cue applied to samples of a pen. Defined As
[VBA] Integer
[Cicode] INT
[C++] PointType
Members Member Name
Description
Value
PointType_NONE
No marker
0
PointType_RECT
A rectangular marker
1
PointType_CIRCLE
A circular marker
2
PointType_PLUS
A plus marker
3
233
See Also
RequestMode [Enumeration]
Member Name
Description
Value
PointType_CROSS
A cross marker
4
PointType_TRIANGLE
A triangular marker
5
PointType_ELLIPSE
A elliptical marker
6
IPen.SetQualityCompactionPointType [Method]
Defines the data acquisition method for a pen. Defined As
[VBA] Integer
[Cicode] INT
[C++] RequestMode
Members Member Name
Description
Value
RequestMode_Average
The value will be an average of all the individual samples within the multiple sample, as will the timestamp
0
RequestMode_Minimum
The value will be the minimum value out of all the individual samples 1 within the multiple sample. The timestamp will be the average of all the individual samples.
RequestMode_Maximum The value will be the maximum value out of all the individual samples 2 within the multiple sample. The timestamp will be the average of all the individual samples. RequestMode_Newest
See Also
ToolbarButtonType [Enumeration]
The value will the latest arrived value out of all the individual samples 3 within the multiple sample. The timestamp will be the average of all the individual samples.
IPen.RequestMode [Property][Get/Set]
Defines the type of a toolbar button. Defined As
[VBA] Integer
[Cicode] INT
[C++] ToolbarButtonType
Members
See Also
LineType [Enumeration]
Member Name
Description
Value
ToolbarButtonType_Push
Standard push button behavior.
0
ToolbarButtonType_Toggle
The button has two states: On and Off.
1
ToolbarButtonType_Separato A visual marker used to group buttons. r
2
ICommandSystem.Create [Method] , ICommand.ButtonType [Property][Get]
Defines the visual representation of the lines between samples of an analog pen. Defined As
[VBA] Integer
234
[Cicode] INT
[C++] LineType
Members Member Name
Description
Value
LineType_STRAIGHT A single line is drawn from point A to point B.
0
LineType_STEPPED The line drawn will maintain the value of the previous sample. When the 1 samples differ, a vertical line will be drawn to the new sample value.
See Also
ErrorNotifyCode [Enumeration]
IAnalogPen.LineInterpolation [Property][Get/Set]
Defines known errors that can occur during operation. Defined As
[VBA] Integer
[Cicode] INT
[C++] ErrorNotifyCode
Members Member Name
Description
Value
ErrorNotifyCode_None
No error.
0
ErrorNotifyCode_InvalidTag
Occurs when the tag specified for the pen does not exist.
1
ErrorNotifyCode_CtapiConnectionOffline Occurs when connections cannot be made to the trend 2 and/or alarm servers.
See Also
QualityType [Enumeration]
ErrorNotifyCode_Unknown
Occurs when an unknown Vijeo Citect or Windows error occurs.
ErrorNotifyCode_NoServer
Occurs when Vijeo Citect cannot find a server toget the 4 data from.
ErrorNotifyCode_InvalidArgument
Occurs when an invalid argument is specified.
5
ErrorNotifyCode_OutOfMemory
Occurs when a memory error is detected.
6
ErrorNotifyCode_BadVersion
Occurs when the trend and/or alarmservers do not match the client version.
7
ErrorNotifyCode_NoPrivilege
Occurs when the current user does not have the required privileges to view the data.
8
Error [Event]
Defines the known quality states of data. Defined As
[VBA] Integer
[Cicode] INT
[C++] QualityType
Members Member Name
Description
Value
QualityType_Good
The sample is good
0
QualityType_NA
Indicates a loss of connection
1
3
235
Member Name
Description
Value
QualityType_Gated
Indicates the data was marked as unwanted
2
Remarks An alarm pens “disabled” state is treated as QualityType_Gated. See Also
QualityCompactionType [Enumeration]
IPen.SetQualityLineStyle [Method]
Specifies the different types of presentation used for a sample. Defined As
[VBA] Integer
[Cicode] INT
[C++] QualityCompactionType
Members
See Also
FileLocation [Enumeration]
Member Name
Description
Value
QualityCompactionType_Single
Representation when the marker represents a single 0 sample
QualityCompactionType_Multiple
Representation when the marker represents a calculation of two or more samples
1
QualityCompactionType_Interpolated
Representation when the marker represents interpolated samples
2
IPen.SetQualityCompactionPointType [Method]
Specifies the location to save and write Process Analyst views to. Defined As
[VBA] Integer
[Cicode] INT
[C++] FileLocation
Members
See Also
Member Name
Description
Value
FileLocation_Local
Refers to the project folder
0
FileLocation_Server
Refers to the both the primary/standby server paths 1
FileLocation_User
Refers to the My Documents folder
2
IProcessAnalyst.LoadFromFile [Method] , IProcessAnalyst.SaveToFile [Method]
IToolbar Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IToolbar
236
Methods (0) Properties (2) IToolbar.Visible [Property][Get/Set] IToolbar.Buttons [Property][Get]
IToolbar.Visible [Property][Get/Set]
Gets and Sets this Toolbars Visible state. Defined As
[VBA] Boolean Visible
[Cicode] INT Visible
[C++] VARIANT_BOOL Visible
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Limits
True (-1): Visible
False (0): Invisible
Remarks If the toolbar is not visible, all buttons tied to it will not appear. Only the main toolbar can be hidden. Setting the new toolbar to invisible will result in a GeneralFailure. Calling Syntax This example assumes there is a valid Toolbar object as retrieved from a Process Analyst’s Toolbars collection. (e.g., VBA: ProcessAnalyst.Toolbars.Item(1)) [VBA] Sub Example(Toolbar As Object) Dim visible As Boolean ‘Getting Property value visible = Command.Visible ‘Setting Property value Command.Visible = False End Sub
[Cicode] FUNCTION Example(OBJECT hToolbar) // Getting property value INT nVisible = _ObjectGetProperty(hToolbar, "Visible"); // Setting property value _ObjectSetProperty(hToolbar, "Visible", 0); END
IToolbar.Buttons [Property][Get]
Gets this Toolbars collection of Buttons. Defined As
[VBA] Object Buttons
237
[Cicode] OBJECT Buttons
[C++] IToolbarButtons* Buttons
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid Toolbar object as retrieved from a Process Analyst’s Toolbars collection. (e.g., VBA: ProcessAnalyst.Toolbars.Item(1)) [VBA] Sub Example(Toolbar As Object) Dim buttons As Object ‘Getting Property value Set buttons = Command.Buttons End Sub
[Cicode] FUNCTION Example(OBJECT hToolbar) // Getting property value OBJECT hButtons = _ObjectGetProperty(hToolbar, "Buttons"); END
IToolbars Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IToolbar
Methods (0) Properties (3) IToolbars.Count [Property][Get] IToolbars.Item [Property][Get] IToolbars._NewEnum [Property][Get]
IToolbars.Count [Property][Get]
Gets the number of Toolbars in this collection. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Execution Result If the property get succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. Calling Syntax
238
This example assumes there is a valid Toolbars collection as retrieved from an ObjectView. (e.g., VBA: objectView.Toolbars). [VBA] Sub Example(Toolbars As Object) Dim count As Long ‘Getting Property value count = Toolbars.Count End Sub
[Cicode] FUNCTION Example(OBJECT hToolbars) // Getting property value INT nCount= _ObjectGetProperty(hToolbars, "Count"); END
IToolbars.Item [Property][Get]
Gets the Toolbar at a supplied index location in this collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IToolbar* Item)
Parameters index [in] Indicates
the index location of the child item to return from this collection. (One based) 1 = Main toolbar; 2 = Navigation toolbar. Execution Result If the property get succeeds, the return value will be Success. If the index is out of range, the return value will be InvalidArgument. Calling Syntax This example assumes there is a valid Toolbars collection as retrieved from an ObjectView. (e.g., VBA: objectView.Toolbars) [VBA] Sub Example(Toolbars As Object) Dim toolbar As Object ‘Getting Property value Set toolbar = Toolbars.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hToolbars) // Getting property value OBJECT hToolbar = _ObjectCallMethod(hToolbars, "get_Item", 1); END
IToolbars._NewEnum [Property][Get]
This allows For.. Each.. Next integration in VB. Calling Syntax
239
This example assumes there is a valid Toolbars collection as retrieved from an ObjectView (e.g., VBA: objectView.Toolbars). This property is not applicable to Cicode. [VBA] Sub Example(Toolbars As Object) Dim toolbar As Object Dim count Object ‘Using Property For Each toolbar In Toolbars count = count + 1 Next toolbar End Sub
IToolbarButton Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IToolbar
Methods (0) Properties (1) IToolbarButton.CommandId [Property][Get]
IToolbarButton.Comma ndId [Property][Get]
Gets the ID of the associated command for this button. Defined As
[VBA] String CommandId
[Cicode] STRING CommandId
[C++] BSTR CommandId
Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView (e.g., VBA: objectView.Toolbars.Item(1).Buttons). [VBA] Sub Example(Buttons As Object) Dim commandId As String ‘Getting Property value commandId = Buttons.CommandId End Sub
[Cicode] FUNCTION Example(OBJECT hButtons) // Getting property value STRING nCommandId = _ObjectGetProperty(hButtons, "CommandId"); END
240
IToolbarButtons Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] IToolbar
Methods (3) IToolbarButtons.Add [Method] IToolbarButtons.Remove [Method] IToolbarButtons.RemoveAll [Method]
Properties (3) IToolbarButtons.Count [Property][Get] IToolbarButtons.Item [Property][Get] IToolbarButtons._NewEnum [Property][Get]
IToolbarButtons.Add [Method]
Adds a toolbar button linked to the command identified by the supplied Command Id to this Toolbar. Defined As
[VBA] Add(CommandId as String)
[Cicode] Add (STRING CommandId)
[C++] HRESULT Add (BSTR CommandId)
Parameters CommandId [in] The Command ID of a command to link to the new
button that is being
added. Execution Result If this method succeeds, the return value will be Success. If the command ID is invalid, the return value will be InvalidArgument. Remarks If this method succeeds, the ID supplied will be linked to the new button that is added. The Commands properties will be applied to that button. (its icon, tooltip, security) If this button is pressed, the CommandExecuted event will raise with this Command ID. See Also
CommandExecuted [Event]
Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView (e.g., VBA: objectView.Toolbars.Item(1).Buttons). [VBA] Sub Example(Buttons As Object) Buttons.Add(“Citect_Command_Help”) End Sub
241
[Cicode] FUNCTION Example(OBJECT hButtons) _ObjectCallMethod(hButtons, “Add”, “Citect_Command_Help”); END
IToolbarButtons.Remov e [Method]
Removes a button from this toolbar at the supplied index. Defined As
[VBA] Remove(Index as Integer)
[Cicode] Remove (INT Index)
[C++] HRESULT Remove (int Index)
Parameters Index [in] The
index of the button to remove from this toolbar. (1 Based)
Execution Results If the method succeeds, the return value will be Success. If the index is out of range, the return value will be InvalidRange. If the method fails, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView. (e.g., VBA: objectView.Toolbars.Item(1).Buttons). [VBA] Sub Example(Buttons As Object) Buttons.Remove(1) End Sub
[Cicode] FUNCTION Example(OBJECT hButtons) _ObjectCallMethod(hButtons, “Remove”, 1); END
IToolbarButtons.Remov eAll [Method]
Removes all buttons from this Toolbar. Defined As
[VBA] RemoveAll()
[Cicode] RemoveAll()
[C++] HRESULT RemoveAll()
Execution Results If this method succeeds, the return value will be Success. If this method fails, the return value will be GeneralFailure. Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView. (e.g., VBA: objectView.Toolbars.Item(1).Buttons)
242
[VBA] Sub Example(Buttons As Object) Buttons.RemoveAll() End Sub
[Cicode] FUNCTION Example(OBJECT hButtons) _ObjectCallMethod(hButtons, “RemoveAll”); END
IToolbarButtons.Count [Property][Get]
Gets the number of Buttons in this collection. Defined As
[VBA] Long Count
[Cicode] INT Count
[C++] int Count
Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView. (e.g., VBA: objectView.Toolbars.Item(1).Buttons). [VBA] Sub Example(Buttons As Object) Dim count As Long ‘Getting Property value count = Buttons.Count End Sub
[Cicode] FUNCTION Example(OBJECT hButtons) // Getting property value INT nCount = _ObjectGetProperty(hButtons, "Count"); END
IToolbarButtons.Item [Property][Get]
Gets the button at a supplied index location in this collection. Defined As
[VBA] Item(index As Long) as Object
[Cicode] OBJECT Item(INT index)
[C++] Item(int index, IToolbarButton* Item)
Parameters index [in] Indicates the index location of the button to return from this collection.
(One based) Execution Results If the property get succeeds, the return value will be success. If the index is out of range, the return value will be InvalidArgument. If the method fails, the return value will be GeneralFailure.
243
Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView (e.g., VBA: objectView.Toolbars.Item(1).Buttons). [VBA] Sub Example(Buttons As Object) Dim toolbar As Object ‘Getting Property value Set toolbar = Buttons.Item(1) End Sub
[Cicode] FUNCTION Example(OBJECT hButtons) // Getting property value OBJECT hToolbar = _ObjectCallMethod(hButtons, "get_Item", 1); END
IToolbarButtons._NewE num [Property][Get]
This allows For.. Each.. Next integration in VB. Calling Syntax This example assumes there is a valid ToolbarButtons collection as retrieved from an ObjectView (e.g., VBA: objectView.Toolbars.Item(1).Buttons). This property is not applicable to Cicode. [VBA] Sub Example(Buttons As Object) Dim button As Object Dim count Object ‘Using Property For Each button In Buttons count = count + 1 Next button End Sub
ITrendCursor Interface Defined As
[VBA] Object
[Cicode] OBJECT
[C++] ITrendCursor
Methods ITrendCursor.GetValue [Method] ITrendCursor.Delete [Method]
Properties ITrendCursor.Color [Property][Get/Set] ITrendCursor.Width [Property][Get/Set] ITrendCursor.Position [Property][Get/Set] ITrendCursor.Visible [Property][Get/Set] ITrendCursor.Collection [Property][Get] ITrendCursor.Name [Property][Get/Set]
244
ITrendCursor.PenLabelVisible [Property][Get/Set] ITrendCursor.PenLabelWidth [Property][Get/Set] ITrendCursor.PenLabelHeight [Property][Get/Set] ITrendCursor.PenLabelX [Property][Get/Set] ITrendCursor.PenLabelY [Property][Get/Set] ITrendCursor.LabelsLocked [Property][Get/Set]
ITrendCursor.GetValue [Method]
Gets the value at the cursor for the given pen. Defined As
[VBA] GetValue(pen As Object, asLocal As Boolean, time As Date, milli As Integer, value As String)
[Cicode] GetValue(OBJECT pen, INT asLocal, REAL time, INT milli, STRING value)
[C++] HRESULT Create GetValue(IPen* pen, VARIANT_BOOL asLocal, DATE *time, short *milli, BSTR *value)
Parameters pen [in] The
pen for which the value is required.
asLocal [in] Set
to True (-1) if returned time is required in Local form (False (0) for
UTC). time [out] The
time represented by the cursor position. This is accurate to one second and must be combined with milli to give millisecond accuracy. milli [out] Added
to time (see above) to give cursor time in millisecond
accuracy. value
[out] The value of the trend for the given pen at the returned time. Execution Result If the function succeeds, the return value will be Success. If one of the return variables are bad, then the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim asLocal As Boolean Dim cursorTime As Date Dim milli As Integer Dim cursorValue As String
245
asLocal = 0 cursor.GetValue pen, asLocal, cursorTime, milli, cursorValue End Sub
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) INT asLocal = 0; REAL time; INT milli; STRING value; _ObjectCallMethod(hCursor , "GetValue", hPen, asLocal, time, milli, value); END
ITrendCursor.Delete [Method]
Deletes the cursor. Defined As
[VBA] Delete()
[Cicode] Delete()
[C++] HRESULT Delete()
Execution Result If the function succeeds, the return value will be Success. If the cursor is d eleted, the return value will be GeneralFailure. Remarks This method will remove the cursor from the Process Analyst. Any current references to the cursor will continue to be valid; however, operations on them will result in failure. Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) cursor.Delete End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) _ObjectCallMethod(hCursor, "Delete"); END
ITrendCursor.Color [Property][Get/Set]
Gets or Sets the line color of the cursor. Defined As
[VBA] Long Color
[Cicode] INT Color
[C++] OLE_COLOR Color
Execution Result
246
If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the cursor is deleted the return value will be GeneralFailure. Remarks The Cicode function PackedRGB can be used to convert an RGB color specification to the OLE_COLOR type used by the Process Analyst. Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim trendCursorColor As Long ‘Getting Property value trendCursorColor = cursor.Color ‘Setting Property value (to red) cursor.Color = 255 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) INT trendCursorColor; // Getting current property value trendCursorColor = _ObjectGetProperty(hCursor, “Color”); // Setting Property to blue _ObjectSetProperty(hCursor, “Color”, PackedRGB(0, 0, 255)); END
ITrendCursor.Width [Property][Get/Set]
Gets or Sets the line width of the cursor. Defined As
[VBA] Long Width
[Cicode] INT Width
[C++] int Width
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the cursor is deleted the return value will be GeneralFailure. Limits
Minimum (0)
Maximum (8)
Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim lineWidth As Long ‘Getting Property value
247
lineWidth = cursor.Width ‘Setting Property value cursor.Width = 5 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) INT lineWidth; // Getting current property value lineWidth = _ObjectGetProperty(hCursor, “Width”); // Setting Property to 5 _ObjectSetProperty(hCursor, “Width”, 5); END
ITrendCursor.Position [Property][Get/Set]
Get or Set the cursor’s physical position in the Process Analyst. Defined As
[VBA] Long Position
[Cicode] INT Position
[C++] int Position
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Remarks The cursor position is measured as the number of pixels from the left of the Process Analyst graph. Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim position As Integer ‘Getting Property value position = cursor.Position ‘Setting Property value cursor.Position = 300 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) INT position; // Getting current property value position = _ObjectGetProperty(hCursor, “Position”); // Setting Property to (300) _ObjectSetProperty(hCursor, “Position”, 300); END
ITrendCursor.Visible [Property][Get/Set]
Get or Set whether the cursor is visible. Defined As
248
[VBA] Boolean Visible
[Cicode] INT Visible
[C++] VARIANT_BOOL Visible
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Remarks This property controls the visibility of the cursor. The visibility is also applied to all labels associated with the cursor. See Also
ITrendCursor.PenLabelVisible [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim visibility As Boolean ‘Getting Property value visibility = cursor.Visible ‘Setting Property value (False) cursor.Visible = False End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) INT visibility; // Getting current property value visibility = _ObjectGetProperty(hCursor, “Visible”); // Setting Property to False (0) _ObjectSetProperty(hCursor, “Visible”, 0); END
ITrendCursor.Collection [Property][Get]
Obtain a reference to the ICursors collection that contains the cursor. Defined As
[VBA] Object Collection
[Cicode] OBJECT Collection
[C++] HRESULT Collection(ICursors **cursor)
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Calling Syntax This example assumes you have a valid reference to a cursor.
249
[VBA] Sub Example(cursor As Object) Dim cursors As Object ‘Getting Property collection Set cursors = cursor.Collection End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) OBJECT hCursors; // Getting collection hCursors = _ObjectGetProperty(hCursor, “Collection”); END
ITrendCursor.Name [Property][Get/Set]
Get or Set the Name of the cursor. Defined As
[VBA] String Name
[Cicode] STRING Name
[C++] BSTR Name
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the name is 0 characters or greater than 250, the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Remarks When setting the name property, remember that cursor names must be unique. Setting the Name property will fail if a cursor with that name already exists. Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim name As String ‘Getting Property value name = cursor.Name ‘Setting Property value cursor.Name = “NewCursor” End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) STRING name; // Getting current property value name = _ObjectGetProperty(hCursor, “Name”); // Setting Property _ObjectSetProperty(hCursor, “Name”, “NewCursor”); END
250
ITrendCursor.PenLabel Visible [Property][Get/ Set]
Get or Set the label visibility of the specified pen on this cursor. Defined As
[VBA] Boolean PenLabelVisible(pen As Object)
[Cicode] INT PenLabelVisible(OBJECT pen)
[C++] HRESULT PenLabelVisible(IPen* pen, VARIANT_BOOL labelVisible)
Parameters pen [in] The
pen for which cursor label is to be referenced.
Execution Result If the property get/set succeeds, the return value will be Success. If the return variable is bad, the return value will be InvalidArgument. If the cursor is deleted, the return value will be GeneralFailure. Limits
True (-1): Label is visible.
False (0): Label is hidden.
Remarks Setting the visibility of the cursor using the Visible property will override the pen label visibility. For example, if a particular label is hidden using PenLabelVisible, this label will be shown again if Visible is se t to True (-1). See Also
ITrendCursor.Visible [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim labelVisible As Boolean ‘Getting Property value labelVisible = cursor.PenLabelVisible(pen) ‘Setting Property value (False) cursor.PenLabelVisible(pen) = False End Sub
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) INT labelVisible; // Getting current property value labelVisible = _ObjectCallMethod(hCursor, "get_PenLabelVisible", hPen); // Setting Property to FALSE _ObjectCallMethod(hCursor , "put_PenLabelVisible", hPen, 0); END
251
ITrendCursor.PenLabel Width [Property][Get/ Set]
Get or Set the label width of the specified pen on this cursor. Defined As
[VBA] Double PenLabelWidth(pen As Object)
[Cicode] REAL PenLabelWidth (OBJECT pen)
[C++] HRESULT PenLabelWidth (IPen* pen, double labelWidth)
Parameters pen [in] The
pen for which cursor label is to be referenced.
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the cursor is deleted the return value will be GeneralFailure. Remarks The value of width is represented in pixels. See Also
, ITrendCursor.PenLabelHeight [Property][Get/Set] ITrendCursor.PenLabelX [Property][Get/Set] , ITrendCursor.PenLabelY [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim labelWidth As Double ‘Getting Property value labelWidth = cursor.PenLabelWidth(pen) ‘Setting Property value (100) cursor.PenLabelWidth(pen) = 100 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) REAL labelWidth; // Getting current property value labelWidth = _ObjectCallMethod(hCursor , "get_PenLabelWidth", hPen); // Setting Property to 100 _ObjectCallMethod(hCursor , "put_PenLabelWidth", hPen, 100); END
ITrendCursor.PenLabel Height [Property][Get/ Set]
Get or Set the label height of the specified pen on this cursor. Defined As
[VBA] Double PenLabelHeight(pen As Object)
[Cicode] REAL PenLabelHeight (OBJECT pen)
[C++] HRESULT PenLabelHeight (IPen* pen, double labelHeight)
Parameters
252
pen [in] The
pen for which cursor label is to be referenced.
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the cursor is deleted the return value will be GeneralFailure. Remarks The value of height is represented in pixels. See Also
ITrendCursor.PenLabelWidth [Property][Get/Set] , ITrendCursor.PenLabelX [Property][Get/Set] , ITrendCursor.PenLabelY [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim labelHeight As Double ‘Getting Property value labelHeight = cursor.PenLabelHeight(pen) ‘Setting Property value (100) cursor.PenLabelHeight (pen) = 100 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) REAL labelHeight; // Getting current property value labelHeight = _ObjectCallMethod(hCursor , "get_PenLabelHeight", hPen); // Setting Property to 100 _ObjectCallMethod(hCursor , "put_PenLabelHeight", hPen, 100); END
ITrendCursor.PenLabel X [Property][Get/Set]
Get or Set the label’s X-Axis position of the specified pen on this cursor. Defined As
[VBA] Double PenLabelX(pen As Object)
[Cicode] REAL PenLabelX (OBJECT pen)
[C++] HRESULT PenLabelX (IPen* pen, double labelX)
Parameters pen [in] The
pen for which cursor label is to be referenced.
Execution Result If the property get/set succeeds the return value will be Success. If the return variable is bad then the return value will be InvalidArgument. If the cursor is deleted the return value will be GeneralFailure.
253
Remarks The label position is represented in pixels. See Also
ITrendCursor.PenLabelWidth [Property][Get/Set] , ITrendCursor.PenLabelHeight [Property][Get/Set] , ITrendCursor.PenLabelY [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim labelX As Double ‘Getting Property value labelX = cursor.PenLabelX(pen) ‘Setting Property value (100) cursor.PenLabelX(pen) = 100 End Sub
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) REAL labelX; // Getting current property value labelX = _ObjectCallMethod(hCursor , "get_PenLabelX", hPen); // Setting Property to 100 _ObjectCallMethod(hCursor , "put_PenLabelX", hPen, 100); END
ITrendCursor.PenLabel Y [Property][Get/Set]
Get or Set the label’s Y-Axis position of the specified pen on this cursor. Defined As
[VBA] Double PenLabelY(pen As Object)
[Cicode] REAL PenLabelY (OBJECT pen)
[C++] HRESULT PenLabelY (IPen* pIPen, double labelY)
Remarks The label position is represented in pixels Syntax
ITrendCursor.PenLabelWidth [Property][Get/Set] , ITrendCursor.PenLabelHeight [Property][Get/Set] , ITrendCursor.PenLabelX [Property][Get/Set]
Calling Syntax This example assumes you have a valid reference to a cursor and a pen. [VBA] Sub Example(cursor As Object, pen As Object) Dim labelY As Double ‘Getting Property value labelY = cursor.PenLabelY(pen) ‘Setting Property value (100) cursor.PenLabelY(pen) = 100 End Sub
254
[Cicode] FUNCTION Example(OBJECT hCursor, OBJECT hPen) REAL labelY; // Getting current property value labelY = _ObjectCallMethod(hCursor , "get_PenLabelY", hPen); // Setting Property to 100 _ObjectCallMethod(hCursor , "put_PenLabelY", hPen, 100); END
ITrendCursor.LabelsLo cked [Property][Get/Set]
Get or Set whether the cursor label positions are locked. Defined As
[VBA] Boolean LabelsLocked
[Cicode] INT LabelsLocked
[C++] VARIANT_BOOL LabelsLocked
Limits
True (-1): Labels are locked
False (0): Labels are unlocked
Remarks If labels are locked, they will not move when the cursor position is changed. Calling Syntax This example assumes you have a valid reference to a cursor. [VBA] Sub Example(cursor As Object) Dim labelsLocked As Boolean ‘Getting Property value labelsLocked = cursor.LabelsLocked ‘Setting Property value (False) cursor.LabelsLocked = False End Sub
[Cicode] FUNCTION Example(OBJECT hCursor) INT labelsLocked; // Getting current property value labelsLocked = _ObjectGetProperty(hCursor, “LabelsLocked”); // Setting Property to False (0) _ObjectSetProperty(hCursor, “LabelsLocked”, 0); END
Chapter 13: Cicode Programming Reference Automation Examples The best way of understanding how to use the Process Analyst’s automation model is to see some example code. The following examples cover the most important concepts of extensibility offered by the Process Analyst:
Event handling
Enumerating collections
Custom commands
Custom columns
All of the samples assume you are using the CSV example project and have pasted a new Process Analyst onto the test page provided by the project. You will also need to configure the Process Analyst object’s Name and Event class by doing the following:
Handling an Event
1
In the CSV example project open the “test” page in Graphics Build er
2
Click the Process Analyst icon in the toolbox to insert the control.
3
Resize the control to fit the test page.
4
Double-click the Process Analyst.
5
Click the Access/Identification tab.
6
Change the Object Name to CPA.
7
Change the Event class to CPA_E.
8
Click Apply and OK.
The Process Analyst contains many events that are triggered w hen certain actions occur. See “Events”. To handle an event you must provide a handler for the event by prepending your Process Analyst’s event class name with the event name you want to handle and an underscore. To configure the event class, see “Automation Examples”. The example below shows how to define a handler for the “MouseClick” event with an event class defined as “CPA_E”. [VBA] Sub CPA_E_MouseClick(pen As Object, button As Integer) End Sub
[Cicode] FUNCTION CPA_E_MouseClick(OBJECT hPA, OBJECT hPen, INT button) END
The following example uses the MouseClick event to cancel the box zoom operation when the right mouse button is clicked.
256
Note: When referring to an ActiveX object in VBA, you need to prepend it with the page name and an underscore. In the example below, the page name is called “test”. The object name is “CPA” and the event class name is “CPA_E”. [VBA] Sub CPA_MouseClick(pen As Object, button As Integer) Dim bZoomMode As Boolean If (button = 1) Then bZoomMode = test_CPA.ZoomMode If (bZoomMode = True) Then test_CPA.ZoomMode = False End If End If End Sub
[Cicode] FUNCTION CPA_E_MouseClick(OBJECT hPA, OBJECT hPen, INT button) INT bZoomMode = 0; IF (button = 1) THEN bZoomMode = _ObjectGetProperty(hPA, "ZoomMode") IF (bZoomMode = -1) THEN _ObjectSetProperty(hPA, "ZoomMode", 0) END END END
Enumerating collections
The Process Analyst contains many “collections” such as Panes, Pens, Cursors, Commands, and so on. This example shows you how to enumerate through the buttons on the navigation toolbar. [VBA] Sub EnumerateToolbarButtons() Dim navBar As Object Dim iButton As Integer Dim button As Object Dim nButtons As Integer ‘ The Navigation toolbar is the 2nd toolbar in the collection Set navBar = test_CPA.Toolbars.Item(2) If IsNull(navBar) = False Then nButtons = navBar.Buttons.Count For iButton = 1 To nButtons Set button = navBar.Buttons(iButton) Next iButton End If End Sub
[Cicode] FUNCTION EnumerateToolbarButtons() OBJECT hPA = ObjectByName("CPA"); OBJECT hToolbars = _ObjectGetProperty(hPA, "Toolbars"); // The Navigation toolbar is the 2nd toolbar in the collection OBJECT hNavBar = _ObjectCallMethod(hToolbars, "get_Item", 2); OBJECT hButtons;
257
OBJECT hButton; INT nButtons; INT iButton; IF (ObjectIsValid(hNavBar)) THEN hButtons = _ObjectGetProperty(hNavBar, "Buttons"); nButtons = _ObjectGetProperty(hButtons, "Count"); FOR iButton = 1 TO nButtons DO hButton = _ObjectCallMethod(hButtons, "get_Item", iButton); END END END
Note: Many collections have an ItemById property that allows you to get the item you want without having to enumerate through the collection to find the item you want.
Implementing a custom command
Custom commands are easy to implement and involve creating a new command, adding it to a toolbar, and responding to the CommandExecuted event. To add a new command and add it to the toolbar as a button: 1
Display the properties for your Process Analyst in the Graphics Builder
2
See Adding New Commands.
3
Use the following settings:
ID =“SelectedPen”
Tooltip = “Show the name of the selected pen”
Button style =
Enabled =
Once you’ve done this, you need to write an event handler for the CommandExecuted event. This event will be called when the command is executed, whether by Cicode or by clicking on the respective toolbar button. The CommandExecuted event when triggered has a commandId parameter identifying the command executed by the operator. This example implements a command that displays a message box showing the name of the primary selected pen. See Also
“CommandExecuted [Event]” [VBA]
Sub CPA_E_CommandExecuted(commandId As String) Select Case commandId Case "SelectedPen" Call OnSelectedPen() End Select End Sub Sub OnSelectedPen() Dim pen As Object Dim sName As String
258
Dim sMessage As String Set pen = test_CPA.LastSelectedPen If IsNull(pen) = False Then sName = pen.Name End If sMessage = "The name of the selected pen is:" + Chr(13) + sName MsgBox sMessage, 48, "Citect" End Sub
[Cicode] FUNCTION CPA_E_CommandExecuted(OBJECT hPA, STRING commandId) SELECT CASE commandId CASE "SelectedPen" OnSelectedPen(hPA); END SELECT END FUNCTION OnSelectedPen(OBJECT hPA) OBJECT hPen; STRING sName; STRING sMessage; IF ObjectIsValid(hPA) THEN hPen = _ObjectGetProperty(hPA, "LastSelectedPen"); IF ObjectIsValid(hPen) THEN sName = _ObjectGetProperty(hPen, "Name"); END sMessage = "The name of the selected pen is:^n" + sName; Message("Citect", sMessage, 48); END END
Enabling and Disabling a Command
You can also respond to the UpdateCommand event to control the enable/disable state of the command’s toolbar button. The example below disables the button if there are no pens. [VBA] Sub CPA_E_UpdateCommand(commandId As String) Select Case commandId Case "SelectedPen" Call OnUpdatedSelectedPen() End Select End Sub Sub OnUpdatedSelectedPen() Dim pen As Object Dim command As Object Dim sName As String On Error Goto errHandler
259
Set command = test_CPA.CommandSystem.ItemById("SelectedPen") Set pen = test_CPA.LastSelectedPen sName = pen.Name command.Enabled = True Exit Sub errHandler: command.Enabled = False End Sub
[Cicode] FUNCTION CPA_E_UpdateCommand(OBJECT hPA, STRING commandId) SELECT CASE commandId CASE "PaneLock" OnUpdatePaneLock(hPA); CASE "SelectedPen" OnUpdateSelectedPen(hPA); END SELECT END FUNCTION OnUpdateSelectedPen(OBJECT hPA) OBJECT hPen = _ObjectGetProperty(hPA, "LastSelectedPen"); OBJECT hCommandSystem = _ObjectGetProperty(hPA,"CommandSystem"); OBJECT hCommand = _ObjectCallMethod(hCommandSystem,"get_ItemById", "SelectedPen"); INT iError = 0; ErrSet(1); _ObjectGetProperty(hPen, "Name"); iError = IsError(); IF (iError <> 0) THEN _ObjectSetProperty(hCommand, "Enabled", 0); ELSE _ObjectSetProperty(hCommand, "Enabled", -1); END ErrSet(0); END
See Also
Implementing a custom column
“UpdateCommand [Event]” Custom columns are added to the Object View allowing you to display your own information associated with a pen. The sample below implements a column that calculates the “Display Period” for each pen on the Process Analyst. The sample consists of three functions: an update function and two event handlers to ensure the column is updated when new pens are added and when the time span is changed. The Update Function
The update function is complex since it needs to match an Object View pen item with a real pen object; however, this isn’t too difficult because the Object View tree always reflects how many panes and pens are being displayed.
260
The code achieves this by iterating through each pane and pen object in the Process Analyst while simultaneously keeping a running index count of which pane/pen item it matches up to in the Object View tree. By using these indexes the code knows which row to update. A row update is achieved using the PutField method. Note: Implementing your own column is CPU-intensive. Try to keep the amount of code required to calculate a row value as efficient as possible and be aware how often the code will be executed. Note also that, for efficiency, the BlockUpdates and UnblockUpdates functions are used to limit the number of updates made to the Object View. Event Handlers
Once you have a function that implements your custom column, you need to know when to update that column. The most common method of doing this is to implement event handlers for particular Process Analyst events. The example below uses the PenCreated event and the HorizontalAxisChanged event. These events will ensure that the column values will be updated when pens are added to the display and when the time span changes. See Also
“IObjectViewItem.PutField [Method]” , “IProcessAnalyst.BlockUpdates [Method]” , “IProcessAnalyst.UnBlockUpdates [Method]” , “PenCreated [Event]” , “HorizontalAxisChanged [Event]” [VBA]
Sub UpdateMyColumn() Dim iPaneItem As Integer Dim iPane As Integer Dim nPanes As Integer Dim nSamples As Integer Dim penItem As Object Dim paneItem As Object nSamples = test_CPA.NumberOfSamples iPaneItem = 0 nPanes = test_CPA.Panes.Count For iPane = 1 To nPanes Dim pane As Object Set pane = test_CPA.Panes.Item(iPane) If IsNUll(pane) = False Then Dim pen As Object Dim iPen As Integer Dim iPenItem As Integer Dim nPens As Integer iPaneItem = iPaneItem + 1 Set paneItem = test_CPA.ObjectView.Items.Item(iPaneItem) test_CPA.BlockUpdates iPenItem = 0 nPens = pane.Pens.Count For iPen = 1 To nPens
261
Set pen = pane.pens.Item(iPen) If IsNUll(pen) = False Then Dim dDiff As Double Dim sText As string Dim Dim Dim Dim
dtStart As Date dtEnd As Date dtStartMs As Integer dtEndMs As Integer
iPenItem = iPenItem + 1 pen.GetHorizontalAxisTimeSpan dtStart, dtStartMs, dtEnd, dtEndMs, False dDiff = ((CDbl(dtEnd) - CDbl(dtStart)) / nSamples) * 86400 If (dDiff >= 0.001) Then sText = CStr(Format(dDiff, "#0.000")) + " seconds" Else sText = "0.001 seconds" End If Set penItem = paneItem.Items.Item(iPenItem) If IsNUll(penItem) = False Then penItem.Putfield "DisplayPeriod", sText End If End If Next test_CPA.UnblockUpdates End If Next End Sub Sub CPA_E_HorizontalAxisChanged(hPen As Object) UpdateMyColumn End Sub Sub CPA_E_PenCreated(hPen As Object) UpdateMyColumn End Sub
[Cicode] FUNCTION UpdateMyColumn() OBJECThPA = ObjectByName("CPA"); OBJECThPanes = _ObjectGetProperty(hPA, "Panes"); OBJECThPane; OBJECThPens; OBJECThPen; OBJECThObjectView = _ObjectGetProperty(hPA, "ObjectView"); OBJECThPaneItems = _OBJECTGetProperty(hObjectView, "Items"); OBJECThPaneItem; OBJECThPenItems; OBJECThPenItem; INT nPanes = _ObjectGetProperty(hPanes, "Count");
262
INT INT INT INT INT INT
nPens; iPen; iPane = 0; nSamples = _ObjectGetProperty(hPA, "NumberOfsamples"); iPenItem = 0; iPaneItem = 0;
REAL dDiff; REAL dtStart; REAL dtEnd; INT dtStartMs; INT dtEndMs; STRINGsText; FOR iPane = 1 TO nPanes DO hPane = _ObjectCallMethod(hPanes, "get_Item", iPane); IF ObjectIsValid(hPane) THEN hPens = _ObjectGetProperty(hPane, "Pens"); nPens = _ObjectGetProperty(hPens, "Count"); iPaneItem = iPaneItem + 1; _ObjectCallMethod(hPA, "BlockUpdates"); hPaneItem = _ObjectCallMethod(hPaneItems, "get_Item", iPaneItem); iPenItem = 0; FOR iPen = 1 TO nPens DO hPen = _ObjectCallMethod(hPens, "get_Item", iPen); IF ObjectIsValid(hPen) THEN iPenItem = iPenItem + 1; _ObjectCallMethod(hPen, "GetHorizontalAxisTimeSpan", dtStart, dtStartMs, dtEnd, dtEndMs, 0); dDiff = ((dtEnd - dtStart) / nSamples) * 86400; IF dDiff > 0.001 THEN sText = StrFormat(dDiff, 10, 3, "seconds"); ELSE sText = "0.001 seconds" END hPenItems = _ObjectGetProperty(hPaneItem, "Items"); hPenItem = _ObjectCallMethod(hPenItems, "get_Item", iPenItem); _ObjectCallMethod(hPenItem, "PutField", "DisplayPeriod", sText); END END _ObjectCallMethod(hPA, "UnblockUpdates"); END END END FUNCTION CPA_E_HorizontalAxisChanged(OBJECT hPA, OBJECT hPen) UpdateMyColumn();
263
END FUNCTION CPA_E_PenCreated(OBJECT hPA, OBJECT hPen) UpdateMyColumn(); END
264
Index A acknowledgement, alarm, 12 Add Cursor command, 25 Add New Pens dialog box, 27 Add Pane command, 43, 61 Add Pen command, 61 adding panes, 43 pens, 27 toolbar commands, 53, 77 alarm acknowledgement, 12 alarm label value, 26 alarm pen types, 13 alarm pens, 11, 45 alarm states, 12 alarm types, 11 AlarmType enumeration, 229 analog pens, 10 association, tag, 65 automation model, 83 Autoscale Vertical Axis command, 61 autoscaling, 61 Autoscroll command, 21 autoscrolling, 21 axis configuring, 47 horizontal, 7 vertical, 8 AxisLabelType enumeration, 230
B Back Half a Span command, 60 Back One Span command, 60 background color, configuring, 41, 43 Boolean terms during searches, 27
C columns, configuring Object View, 54 command system, 81 CommandExecuted event, 81, 228 commands
Add Cursor, 25 Add Pane, 43, 61 Add Pen, 61 adding new, 77 Autoscale Vertical Axis, 61 Autoscroll, 21 Back Half a Span, 60 Back One Span, 60 Copy to Clipboard, 37, 60 Copy to File, 37 Edit Span, 22, 60 Edit Vertical Scale, 23, 60 editing, 78 export, 60 Forward Half a Span, 60 Forward One Span, 60 general, 61 Help, 61 interface, 61 Load View, 56, 59 Lock/Unlock Cursor Labels, 25, 61 Lock/Unlock Pens, 16, 61 Lock/Unlock Vertical Axis Scrolling, 61 navigation, 60 Print, 61 Refresh Data, 61 Remove Pane, 61 Remove Pen, 28, 61 Reset to Default Span, 23, 60 Save View, 56, 59 Show Properties, 61 Show/Hide Cursor, 25, 61 Show/Hide Cursor Labels, 25, 61 Show/Hide Points, 61 Synchronize to Now, 21, 60 Toggle Auto-Scrolling, 21, 60 Toggle Box Zoom, 21, 59 Toggle Object View, 32, 61 Toggle Span Lock, 20, 60 Undo Last Zoom, 21, 60 view, 59 zoom, 59 Zoom In 50%, 21 Zoom in 50%, 59 Zoom Out 50%, 21
266
Zoom out 50%, 59 compaction, data, 5 comparison, trend, 16 configuring appearance of pens, 44 axes, 47 chart panes, 43 chart-wide properties, 41 columns in Object View, 54 cursor labels, 50 cursors, 51 data connection, 50 defaults, 52 design time properties, 77 general properties, 41 gridlines, 46 pen quality, 49 refresh rate, 41 report options, 34, 36 server paths, 42 toolbars, 53 connection, data, 50 context menu. See right-click menu Copy to Clipboard command, 37, 60 Copy to File command, 37 copying data, 37 Create method, 81 creating custom commands, 81 cursor labels, 24, 50 CursorMoved event, 223 cursors, 24 configuring, 51 custom commands, 81 custom commands, adding, 77
Daylight Savings, 18 Daylight Savings time, 8 defaults, configuring, 52 deleting pens, 28 design time properties, configuring, 77 digital pens, 11 display, time, 7
D
general commands, 61 general properties, configuring, 41 GetCommandSystem() property, 81 graphics page, inserting onto, 65 gridlines, 9, 46
data copying, 37 exporting, 37 data compaction, 5 data connection, configuring, 50 data quality, 6 data request mode, 50 data request rate, configuring, 41 date/time axis, 7
E Edit Command dialog box, 78 Edit Span command, 22, 60 Edit Span dialog box, 22 Edit Vertical Scale command, 23, 60 Edit Vertical Scale dialog box, 23 editing commands, 78 effect, halo, 15 end time, specifying, 18 enumerations, automation model, 85 Error event, 223 ErrorNotifyCode enumeration, 234 execution result, 83 export commands, 60 exporting data, 37
F FileLocation enumeration, 235 filtering pens, 27 Fit to unit, 20 fixed height for panes, specifying, 44 Forward Half a Span command, 60 Forward One Span command, 60
G
H halo effect, 15 HatchStyle enumeration, 231 Help command, 61
267
HorizontalAxisChanged event, 221
I IAlarmPen interface, 85 IAlarmPen.AlarmType property, 87 IAlarmPen.GetFillColor method, 88 IAlarmPen.GetHatchColor method, 89 IAlarmPen.GetHatchStyle method, 91 IAlarmPen.LineColor property, 85 IAlarmPen.LineWidth property, 86 IAlarmPen.SetFillColor method, 88 IAlarmPen.SetHatchColor method, 90 IAlarmPen.SetHatchStyle method, 91 IAnalogPen interface, 92 IAnalogPen.LineColor property, 92 IAnalogPen.LineInterpolation property, 93 IAnalogPen.LineWidth property, 94 ICommand interface, 95 ICommand.ButtonType property, 96 ICommand.CommandId property, 95 ICommand.Enabled property, 96 ICommand.Pressed property, 97 ICommand.Privilege property, 99 ICommand.Tooltip property, 98 ICommandSystem interface, 99 ICommandSystem._NewEnum property, 101 ICommandSystem.Count property, 100 ICommandSystem.Create method, 102 ICommandSystem.Execute method, 103 ICommandSystem.Item property, 100 ICommandSystem.ItemById property, 101 ICommandSystem.Remove method, 103 icons, custom, 81 ICursors interface, 104 ICursors._NewEnum property, 106 ICursors.Count property, 107 ICursors.Create method, 104 ICursors.Item property, 106 ICursors.ItemByName property, 107 ICursors.RemoveAll method, 105 IDigitalPen interface, 108 IDigitalPen.Fill property, 111 IDigitalPen.FillColor property, 108 IDigitalPen.LineColor property, 109 IDigitalPen.LineWidth property, 110
Insert ActiveX dialog box, 65 interface commands, 61 interfaces, automation model, 84 interpolation, 10, 45 IObjectView interface, 111 IObjectView.BackgroundColor property, 113 IObjectView.Columns property, 115 IObjectView.ForeColor property, 114 IObjectView.Height property, 113 IObjectView.Items property, 115 IObjectView.SelectedItem property, 116 IObjectView.Visible property, 112 IObjectViewColumn interface, 117 IObjectViewColumn.Name property, 117 IObjectViewColumn.Text property, 117 IObjectViewColumn.Width property, 118 IObjectViewColumns interface, 119 IObjectViewColumns._NewEnum property, 124 IObjectViewColumns.Add method, 119 IObjectViewColumns.Count property, 122 IObjectViewColumns.Hide method, 120 IObjectViewColumns.Item property, 122 IObjectViewColumns.ItemByName property, 123 IObjectViewColumns.Remove method, 120 IObjectViewColumns.Show method, 121 IObjectViewItem interface, 124 IObjectViewItem.Expanded property, 126 IObjectViewItem.GetField method, 124 IObjectViewItem.Items property, 128 IObjectViewItem.PutField method, 125 IObjectViewItem.Tag property, 127 IObjectViewItems interface, 128 IObjectViewItems._NewEnum property, 130 IObjectViewItems.Count property, 129 IObjectViewItems.Item property, 129 IObjectViewPenItem interface, 130 IObjectViewPenItem.BlockColor property, 130 IObjectViewPenItem.Checked property, 131 IObjectViewPenItem.Selected property, 132 IPane interface, 132 IPane.BackgroundColor property, 136 IPane.Collection property, 134 IPane.Delete method, 133 IPane.FixedHeight property, 136 IPane.Height property, 133
268
IPane.Name property, 135 IPane.Pens property, 137 IPanes interface, 138 IPanes._NewEnum property, 141 IPanes.Count property, 139 IPanes.Create method, 138 IPanes.Item property, 140 IPanes.ItemByName property, 141 IPanes.RemoveAll method, 139 IPen interface, 142 IPen.AddSample method, 143 IPen.AxisBackgroundColor property, 162 IPen.BlockRepaint property, 162 IPen.Clear method, 144 IPen.Collection property, 163 IPen.DataPoint property, 164 IPen.DataServer property, 164 IPen.Delete method, 144 IPen.GetDefaultSpan method, 145 IPen.GetHorizontalAxisTimeSpan method, 146 IPen.GetInformation method, 147 IPen.GetStatistic method, 149 IPen.GetVerticalAxisSpan method, 149 IPen.GoToNow method, 150 IPen.Height property, 165 IPen.HorizontalAxisColor property, 166 IPen.HorizontalAxisResize property, 167 IPen.HorizontalAxisScroll property, 168 IPen.HorizontalAxisWidth property, 168 IPen.HorizontalGridlinesColor property, 169 IPen.HorizontalGridlinesStyle property, 170 IPen.HorizontalGridlinesWidth property, 171 IPen.HorizontalMinorGridlinesColor property, 171 IPen.HorizontalMinorGridlinesStyle property, 172 IPen.HorizontalScrollBy method, 151 IPen.HorizontalZoom method, 151 IPen.IsDeleted property, 173 IPen.IsSelected property, 173 IPen.LocalTime property, 174 IPen.Name property, 175 IPen.PointsVisible property, 152 IPen.PutHorizontalAxisTimeSpan method, 153 IPen.PutVerticalAxisSpan method, 154 IPen.RefreshData method, 155 IPen.RequestMode property, 175
IPen.ResetToDefaultSpan method, 156 IPen.Select method, 156 IPen.SetDefaultSpan method, 157 IPen.SetQualityCompactionPointType method, 158 IPen.SetQualityLineStyle method, 158 IPen.SetVerticalAxisLabelValue method, 159 IPen.Stacked property, 176 IPen.TrendCursorLabelFillColor property, 177 IPen.TrendCursorLabelLineColor property, 178 IPen.TrendCursorLabelTextColor property, 178 IPen.VerticalAxisAutoscale property, 179 IPen.VerticalAxisColor property, 180 IPen.VerticalAxisLabelType property, 181 IPen.VerticalAxisResize property, 181 IPen.VerticalAxisScroll property, 182 IPen.VerticalAxisWidth property, 183 IPen.VerticalGridlinesColor property, 184 IPen.VerticalGridlinesStyle property, 185 IPen.VerticalGridlinesWidth property, 185 IPen.VerticalMinorGridlinesColor property, 186 IPen.VerticalMinorGridlinesStyle property, 187 IPen.VerticalScrollBy method, 160 IPen.VerticalZoom method, 161 IPen.Visible property, 187 IPens interface, 188 IPens._NewEnum property, 191 IPens.Count property, 190 IPens.Create method, 189 IPens.Item property, 191 IPens.ItemByName property, 191 IPens.Pane property, 192 IPens.RemoveAll method, 190 IProcessAnalyst interface, 81, 193 IProcessAnalyst.AdminPrivilegeLevel property, 203 IProcessAnalyst.AutoScroll property, 204 IProcessAnalyst.BackgroundColor property, 204 IProcessAnalyst.BlockUpdates method, 194 IProcessAnalyst.CommandSystem property, 205 IProcessAnalyst.ContextMenu property, 206 IProcessAnalyst.CopyToClipboard method, 195 IProcessAnalyst.CopyToFile method, 196 IProcessAnalyst.Cursors property, 207 IProcessAnalyst.DataRequestRate property, 207 IProcessAnalyst.DisplayRefreshRate property, 208 IProcessAnalyst.Language property, 209
269
IProcessAnalyst.LastSelectedPen property, 210 IProcessAnalyst.LoadFromFile method, 197 IProcessAnalyst.LockedPens property, 211 IProcessAnalyst.ObjectView property, 212 IProcessAnalyst.Panes property, 213 IProcessAnalyst.PrimaryPath property, 214 IProcessAnalyst.PrintAll method, 198 IProcessAnalyst.SaveToFile method, 199 IProcessAnalyst.SecondaryPath property, 215 IProcessAnalyst.ShowProperties method, 200 IProcessAnalyst.SubscribeForPropertyChange method, 200 IProcessAnalyst.SynchroniseToNow method, 201 IProcessAnalyst.Toolbars property, 216 IProcessAnalyst.UnBlockUpdates method, 194 IProcessAnalyst.UnsubscribePropertyChange method, 202 IProcessAnalyst.WritePrivilegeLevel property, 216 IProcessAnalyst.ZoomMode property, 217 IToolbar interface, 235 IToolbar.Buttons property, 236 IToolbar.Visible property, 236 IToolbarButton interface, 239 IToolbarButton.CommandId property, 239 IToolbarButtons interface, 240 IToolbarButtons._NewEnum property, 243 IToolbarButtons.Add method, 240 IToolbarButtons.Count property, 242 IToolbarButtons.Item property, 242 IToolbarButtons.Remove method, 241 IToolbarButtons.RemoveAll method, 241 IToolbars interface, 237 IToolbars._NewEnum property, 238 IToolbars.Count property, 237 IToolbars.Item property, 238 ITrendCursor interface, 243 ITrendCursor.Collection property, 248 ITrendCursor.Color property, 245 ITrendCursor.Delete method, 245 ITrendCursor.GetValue method, 244 ITrendCursor.LabelsLocked property, 254 ITrendCursor.Name property, 249 ITrendCursor.PenLabelHeight property, 251 ITrendCursor.PenLabelVisible property, 250 ITrendCursor.PenLabelWidth property, 251
ITrendCursor.PenLabelX property, 252 ITrendCursor.PenLabelY property, 253 ITrendCursor.Position property, 247 ITrendCursor.Visible property, 247 ITrendCursor.Width property, 246
L label value, alarm, 26 legends, report, 35 line styles, 6 LineStyle enumeration, 231 LineType enumeration, 233 Load dialog box, 56 Load View command, 56, 59 loading views, 56 Lock pens check box, 42 Lock/Unlock Cursor Labels, 61 Lock/Unlock Cursor Labels command, 25 Lock/Unlock Pens command, 16, 61 Lock/Unlock Vertical Axis Scrolling command, 61 locked pens, 16
M main page (Properties dialog), 39 main toolbar, 3 menu, right-click, 26 mode, request, 6 model, automation, 83 mouse, using for interaction, 26 MouseClick event, 218 MouseDoubleClick event, 218 multi-language support, 67 multiple samples, 5
N navigating time, 20 navigation commands, 60 navigation toolbar, 17 New Command dialog box, 77 Now indicator, 8 number of samples, 42
O Object View, 31
270
basic functions, 32 configuring columns, 54 creating columns, 79 default columns for, 32 editing columns, 79 Object View (Properties dialog), 40 Operator (term defined), 1 OVColumnAdded event, 227 OVColumnRemoved event, 227 overlaying pens, 9 OVItemAdded event, 225 OVItemChecked event, 226 OVItemRemoved event, 225 OVItemSelected event, 226
P panes adding, 43 configuring, 43 paths, server, configuring, 42 Pen Details box, 28 PenCreated event, 219 PenDeleted event, 220 PenNameMode enumeration, 232 PenRenamed event, 220 pens adding, 27 alarm, 11 analog, 10 appearance, 44 axes, configuring, 47 deleting, 28 digital, 11 filtering, 27 gridlines, configuring, 46 locked, 16 overlaying, 9 quality, configuring, 49 selecting, 15 stacking, 9 unlocked, 16 viewing details, 28 PenSelectionChanged event, 221 PenType enumeration, 232 permissions, 65
persistence, 81 point styles, 5 pointer, mouse, 26 PointType enumeration, 232 primary file server, 43 Print command, 61 Print dialog box, 34 printing reports, 34 Process Analyst button, 65 Properties dialog box, 39 property tree, 39 PropertyChanged event, 224
Q quality configuring pen, 49 quality, data, 6 QualityCompactionType enumeration, 235 QualityType enumeration, 234
R Refresh Data command, 61 refresh rate, configuring, 41 Remove Pane command, 61 Remove Pen command, 28, 61 removing chart panes, 43 toolbar commands, 53 report legends, 35 report options, configuring, 34, 36 reports, 33 configuring, 34 printing, 34 request mode, data, 6, 50 RequestMode enumeration, 233 Reset to Default Span command, 23, 60 result, execution, 83 right-click menu, 26, 40
S samples, number of, 42 Save Process Analyst View dialog box, 56 Save View command, 56, 59 saving views, 56
271
scaling, 17 scrolling, 16 security, 65 selecting pens, 15 time span, 20 server paths, configuring, 42 Shift by unit, 19 Show Properties command, 61 Show/Hide Cursor command, 25, 61 Show/Hide Cursor Labels command, 25, 61 Show/Hide Points command, 61 Span Picker, 20 stacked pens, 9 standby file server, 43 start time, specifying, 18 states, alarm, 12 statistical analysis options (reports), 35 stepped interpolation, 10, 45 straight interpolation, 10, 45 styles line, 6 point, 5 Synchronize to Now command, 21, 60 system, command, 81
T tag association, 65 tag properties, viewing, 28 time display, 7 time format, 18 time span editing, 22 term defined, 20 time, navigating, 20 Toggle Auto-Scrolling command, 60 Toggle Auto-scrolling command, 21 Toggle Box Zoom command, 21, 59 Toggle Object View command, 32, 61 Toggle Span Lock command, 20, 60
toolbar, navigation, 17 ToolbarButtonType enumeration, 233 toolbars adding commands to, 53 changing order of commands, 54 configuring, 53 removing commands from, 53 toolbars (Properties dialog), 40 Tooltip text, 78 tree, property, 39 types, alarm, 11 types, alarm pen, 13
U Undo Last Zoom command, 21, 60 universal time coordinate (UTC) format, 48 unlocked pens, 16 unstacked pens, 9 UpdateCommand event, 81, 229 User (term defined), 1
V value, alarm label, 26 variable height for panes, specifying, 44 vertical (value) axis, 8 VerticalAxisChanged event, 222 view commands, 59 viewing pen details, 28 views, 55 loading, 56 saving, 56
Z zoom commands, 59 Zoom In 50% command, 21 Zoom in 50% command, 59 Zoom Out 50% command, 21 Zoom out 50% command, 59