ASTM E 11-13 Standards Table.pdf

STANDARD SPECIFICATION FOR WOVEN WIRE TEST SIEVE CLOTH AND TEST SIEVES  ASTM E11 - 13 Nominal Dimensions and Permissi ble Variations for Sieve Cloth Cloth and Compliance, Inspection and Calibration Test Sieves Sieves (1)

( 2)

Sieve Designation Standard

millimeter 125 106 100 90 75 63 53 50 45 37.5 31.5 26.5 25 22.4 19 16 13.2 12.5 11.2 9.5 8 6.7 6.3 5.6 4.75 4 3.35 2.8 2.36 2 1.7 1.4 1.18 1 micrometer 850 710 600 500 425 355 300 250 212 180 150 125 106 90 75 63 53 45 38 32 25 20

Alternative

5 in. 4.24 in. 4 in. 3 1/2 in. 3 in. 2 1/2 in. 2.12 in. 2 in. 1 3/4 in. 1 1/2 in. 1 1/4 in. 1.06 in. 1.00 in. 7/8 in. 3/4 in. 5/8 in. 0.530 in. 1/2 in. 7/16 in. 3/8 in. 5/16 in. 0.265 in. 1/4 in. No. 3 1/2 No. 4 No. 5 No. 6 No. 7 No. 8 No. 10 No. 12 No. 14 No. 16 No. 18 No. 20 No. 25 No. 30 No. 35 No. 40 No. 45 No. 50 No. 60 No. 70 No. 80 No. 100 No. 120 No. 140 No. 170 No. 200 No. 230 No. 270 No. 325 No. 400 No. 450 No. 500 No. 635

(3)

( 4)

( 5)

(6)

Nominal Sieve Opening (in.)

±Y Variation for  Average Opening

+X Maximum Variation for Opening

Resulting Maximum Individual Opening

inches 5 4.24 4 3.5 3 2.5 2.12 2 1.75 1.5 1.25 1.06 1 0.875 0.750 0.625 0.530 0.500 0.438 0.375 0.312 0.265 0.250 0.223 0.187 0.157 0.132 0.110 0.0937 0.0787 0.0661 0.0555 0.0469 0.0394 inches 0.0331 0.0278 0.0234 0.0197 0.0165 0.0139 0.0117 0.0098 0.0083 0.0070 0.0059 0.0049 0.0041 0.0035 0.0029 0.0025 0.0021 0.0017 0.0015 0.0012 0.0010 0.0008

millimeter 3.66 3.12 2.94 2.65 2.22 1.87 1.58 1.49 1.35 1.13 0.95 0.802 0.758 0.681 0.579 0.490 0.406 0.385 0.346 0.295 0.249 0.210 0.197 0.176 0.150 0.127 0.107 0.090 0.076 0.065 0.056 0.046 0.040 0.034 micrometer 29.1 24.7 21.2 18.0 15.5 13.3 11.5 9.9 8.7 7.6 6.6 5.8 5.2 4.6 4.1 3.7 3.4 3.1 2.9 2.7 2.5 2.3

millimeter 4.51 3.99 3.82 3.53 3.09 2.71 2.39 2.29 2.12 1.85 1.63 1.44 1.38 1.27 1.13 0.99 0.86 0.83 0.77 0.68 0.60 0.53 0.51 0.47 0.41 0.37 0.32 0.29 0.25 0.23 0.20 0.18 0.16 0.14 micrometer 127 112 101 89 81 72 65 58 52 47 43 38 35 32 29 26 24 22 20 18 16 15

millimeter 129.51 109.99 103.82 93.53 78.09 65.71 55.39 52.29 47.12 39.35 33.13 27.94 26.38 23.67 20.13 16.99 14.06 13.33 11.97 10.18 8.60 7.23 6.81 6.07 5.16 4.37 3.67 3.09 2.61 2.23 1.90 1.58 1.34 1.14 micrometer 977 822 701 589 506 427 365 308 264 227 193 163 141 122 104 89 77 67 58 50 41 35

(13) Typical Wire Diameter 

millimeter   8 6.3 6.3 6.3 6.3 5.6 5 5 4.5 4.5 4 3.55 3.55 3.55 3.15 3.15 2.8 2.5 2.5 2.24 2 1.8 1.8 1.6 1.6 1.4 1.25 1.12 1 0.9 0.8 0.71 0.63 0.56 millimeter   0.5 0.45 0.4 0.315 0.28 0.224 0.2 0.16 0.14 0.125 0.1 0.09 0.071 0.063 0.05 0.045 0.036 0.032 0.03 0.028 0.025 0.02

(14)

(15)

Permissible Range of Choice Min

Max

6.8 5.4 5.4 5.4 5.4 4.8 4.3 4.3 3.8 3.8 3.4 3 3 3 2.7 2.7 2.4 2.1 2.1 1.9 1.7 1.5 1.5 1.3 1.3 1.2 1.06 0.95 0.85 0.77 0.68 0.6 0.54 0.48

9.2 7.2 7.2 7.2 7.2 6.4 5.8 5.8 5.2 5.2 4.6 4.1 4.1 4.1 3.5 3.6 3.2 2.9 2.9 2.6 2.3 2.1 2.1 1.9 1.9 1.7 1.5 1.3 1.15 1.04 0.92 0.82 0.72 0.64

0.43 0.38 0.34 0.27 0.24 0.19 0.17 0.13 0.12 0.106 0.085 0.077 0.06 0.054 0.043 0.038 0.031 0.027 0.024 0.023 0.021 0.017

0.58 0.52 0.46 0.36 0.32 0.26 0.23 0.19 0.17 0.15 0.115 0.104 0.082 0.072 0.058 0.052 0.041 0.037 0.035 0.033 0.029 0.023

Column 3 - These numbers are only approximate but are in use for reference; the sieve shall be identified by the standard designation in millimeters or micrometers.