G r oup of AS T M S t andar d s f o r S t eel Pipes, T ubes and F ittings This group of ASTM standard specifications covers covers various types of steel pipes, tubes and fittings for high-temperature high-temperature service, ordinary use and special applications such as fire protection use. Specifications for steel tubes list standard requirements for boiler and superheater superheater tubes, general service tubes, steel tubes in refinery service, heat exchanger and condenser tubes, mechanical and structural tubing. This article contains ASTM standards for various types of steel pipes which specify requirements for high-temperature service, ordinary use and special applications such as f ire protection use. Specifications for steel tubes list standard requirements for: • • • • • •
Boiler and superheater tubes General service tubes Still tubes in refinery service Heat exchanger exchanger and condenser tubes Mechanical tubing and Structural tubing.
New standards, which cover the general requirements for alloy and stainless steel pipes, and editorial form and style for writing product specifications are also included.
STEEL PIPES A53 A53
A53/ A53/A5 A53M 3M-9 -99b 9b
Speci pecifi fica cattion ion fo for Pi Pipe, pe, Ste Steel el,, Bla Black ck and and Ho Hot-Di t-Dip pped, ed, Zi Zinc-C nc-Co oated, ed, Wel Welde ded d an and Se Seamle amless ss
A74
A74-98
Specif ication for Cast Iron Soil Pipe and Fittings
A106
A106-99e1
Specif ic ication for Seamless Carbon Steel Pipe for High-Temperature Service
A126
A126-95e1
Specif ic ication for Grey Iron Castings for Valves, Fl Flanges, and Pipe Fittings
A134
A134-96
Specif ic ication for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A135
A135-97c
Specif ication for Electric-Resistance-Welded Steel Pipe
A139
A139-96e1
Specif ic ication for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A1 A182
A182 A182/A /A1 182M-9 82M-99 9
Spec Specifi ifica cati tion on for for Forge orged d or Rolle Rolled d Allo Alloy-S y-Ste teel el Pipe Pipe Flan Flange ges, s, Forge orged d Fitt Fittin ings gs,, and and Valve alvess and and Parts arts for for Hi High gh- Temperature Service
A252
A252-98
Specif ication for Welded and Seamless Steel Pipe Piles
A3 A312
A31 A312/A3 2/A31 12M2M-00
Spec Specif ific ica ation tion for for Sea Seaml mles esss an and We Welded lded Aus Austeni enitic tic Sta Staiinles nlesss St Steel eel Pip Pipes es
A33 A333 3
A333 A333/A /A33 333M 3M-9 -99 9
Spec Specif ific ica ation tion for for Sea Seaml mles esss and and We Welded lded Ste Steel Pi Pipe for for Lo Low-T w-Temp empera erature ure Ser Servi vice ce
A33 A335 5
A335 A335/A /A33 335M 5M-9 -99 9
Spec Specif ific ica ation tion for for Seam Seamle less ss Ferri erriti ticc Allo Alloyy-St Stee eell Pipe Pipe for for Hi High gh--Tempe empera ratu ture re Serv Servic icee
A33 A338 8
A338 A338-8 -84 4 (1 (1998) 998)
Spec Specif ific ica ation tion for for Mal Malle leab able le Iron Iron Flan Flange ges, s, Pipe Pipe Fitt Fittin ings gs,, and and Val Valve ve Parts arts for for Rai Railr lroa oad, d, Mar Marin ine, e, and and Othe Otherr Hea Heavy vy Duty Service at Temperatures Up to 650 F (345 C) °
°
A35 A358 8 Service
A358 A358/A /A35 358M 8M-9 -98 8
Spec Specifi ifica cati tion on for for Ele Elect ctri ricc-FFusio usionn-W Welded elded Aust Austen enit itic ic Chro Chromi mium um-N -Nic icke kell All Alloy oy Stee Steell Pip Pipee for for Hi High gh-T -Tem empe pera ratu ture re
A36 A369 9
A369 A369/A /A36 369M 9M-9 -92 2
Spec Specif ific ica ation tion for for Car Carbo bon n and and Fer Ferri riti ticc Allo Alloyy Stee Steell For Forge ged d and and Bore Bored d Pipe Pipe for for Hig Highh-TTempe empera ratu ture re Ser Servi vice ce
A37 A376 6
A37 A376/A3 6/A37 76M-9 6M-98 8
Spec Specif ific ica ation tion for for Sea Seaml mles esss Aus Austeni teniti ticc Stee Steell Pipe Pipe for for Hig Highh-TTempe empera ratu ture re Cent Centra rall-St Sta ation tion Ser Servi vice ce
A377
A377-99
Index of Specif ications for Ductile-Iron Pressure Pipe
A409 A409 A42 A426 6
A409/A A40 9/A409 409M-9 M-95a 5ae1 e1 A426 A426-9 -92 2 (1 (1997) 997)
Specifi Specifica catio tion n for Welde Welded d Larg Largee Diamet Diameter er Austen Austeniti iticc Stee Steell Pipe Pipe for Corros Corrosiv ivee or or High High-T -Temp empera eratur turee Servic Servicee Spec Specif ific ica ation tion for for Cen Centr trif ifug ugal ally ly Cas Cast Fer Ferri riti ticc All Alloy oy Stee Steell Pip Pipee for for Hi High gh--Tempe empera ratu ture re Serv Servic icee
A45 A451 1
A45 A451-93 -93 (199 (1997) 7)
Spec Specif ific ica ation tion for for Cen Centr trif ifug ugal ally ly Cas Cast Aus Austeni teniti ticc Stee Steell Pip Pipee for for Hi High gh--Tempe empera ratu ture re Serv Servic icee
A523
A523-96
Specific fication fo for Pl Plain En End Se Seamless an and Ele Elecctric-Resistance-We -Welded ded St Steel Pi Pipe fo for Hi High-Pressure Pi Pipe-Type Cable Circuits
A524
A524-96
Specif ic ication for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A53 A530 0
A530 A530/A /A53 530M 0M-9 -99 9
Spec Specif ific ica ation tion for for Gene Genera rall Requ Requir irem emen ents ts for for Spec Specia iali lize zed d Carb Carbon on and and Allo Alloyy Stee Steell Pipe Pipe
A648
A648-95e1
Specif ic ication for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A674
A674-95
Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A691
A691-98
Specific fication fo for Ca Carbo rbon and Al Alloy loy St Steel Pi Pipe, El Electr ctric-Fusion-We -Welded fo for Hi High-Pressure Se Service at High Temperatures
G r oup of AS T M S t andar d s f o r S t eel Pipes, T ubes and F ittings A69 A694 4
A694 A694/A /A69 694M 4M-0 -00 0
Spec Specif ific ica ation tion for for Car Carbo bon n and and Allo Alloyy Ste Steel el Forgi orging ngss for for Pipe Pipe Flan Flange ges, s, Fitt Fittin ings gs,, Val Valve ves, s, and and Par Parts ts for for Hig HighhPressure Transmission Service
A716
A716-99
Specif ication for Ductile Iron Culvert Pipe
A733
A733-99
Specif ic ication for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A7 A742
A742/A 42/A7 742M42M-98 98
Spec pecifi ificat cation ion fo for St Steel eel Sh Sheet, eet, Me Metall tallic ic Coat oated and and Pol Polym ymer er Pre Precoa coated for for Co Corrug rruga ated Stee Steell Pip Pipee
A746
A746-99
Specif ication for Ductile Iron Gravity Sewer Pipe
A7 A760
A760 A760/A /A7 760M-9 0M-99 9
Spec Specif ifiicat cation ion for for Corr Corru ugated ted Stee Steell Pip Pipe, Metal etalli licc-C Coat oated for for Sew Sewers and and Dra Drains ins
A7 A761
A76 A761/A7 1/A76 61M-9 1M-98 8
A7 A762
A762 A762/A /A7 762M-9 2M-98 8
Spec Specif ifiicat cation ion for for Corr Corru ugated ted Stee Steell Pip Pipe, Polym olymer er Pre Precoa coated for for Sew Sewers ers and and Drai Drain ns
A7 A790
A790 A790/A /A7 790M90M-99 99
Spec pecifi ificat cation ion for for Sea Seamle mless and and Welde lded Ferri errittic/A ic/Au usten tenitic tic Stai Stainl nles esss Stee Steell Pip Pipe
A7 A796
A796 A796/A /A7 796M96M-99 99
Prac Practi tice ce for for Str Struc uctu tura rall Des Desig ign n of Corr Corrug uga ated ted Ste Steel el Pipe Pipe,, Pip Pipee-Ar Arch ches es,, and and Arch Arches es for for Stor Storm m and and Sani Sanita tary ry Sewers and Other Buried Applications
A7 A798
A798 A798/A /A7 798M98M-97 97a a
Pra Practic cticee for for Ins Install tallin ing g Factor ctoryy-Ma Made de Corr Corrug uga ated ted Ste Steel el Pipe Pipe for for Se Sewers wers and and Oth Other er Appl Applic ica ation tionss
A80 A807 7
A807 A807/A /A80 807M 7M-9 -97 7
Pra Practic cticee for for Ins Install tallin ing g Corr Corrug uga ated ted Stee Steell Stru Struct ctur ural al Pla Plate Pipe Pipe for for Sewe Sewers rs and and Othe Otherr Appl Applic ica ation tionss
A810
A810-94
Specif ication for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A8 A813
A81 A813/A8 3/A81 13M-9 3M-95e 5e2 2
Spec pecifi ificat cation ion fo for Sing Single le-- or or Dou Doubleble-W Welde elded d Aus Austen tenitic itic Stai Stain nless less Stee Steell Pipe Pipe
A8 A814
A81 A814/A8 4/A81 14M-9 4M-96 6 (1 (1998) 998)
Spec Specifi ifica cati tion on for for Col Coldd-W Worke orked d Weld Welded ed Aust Austen enit itic ic Stai Stainl nles esss Ste Steel el Pipe Pipe
A849 Pipe
A849-99
Specif ic ication fo for Po Post-Applied Co Coatings, Pa Pavings, an and Li Linings fo for Co Corrugated St Steel Se Sewer an and Dr Drainage
A861
A861-94e1
Specif ication for High-Silicon Iron Pipe and Fittings
A86 A862 2
A862 A862/A /A86 862M 2M-9 -98 8
Pra Practic cticee fo for Ap Appli plicat cation ion of of Asp Asph halt alt Coa Coati ting ngss to to Co Corru rrugated ted St Steel eel Se Sewer and and Dr Draina ainag ge Pi Pipe
A865
A865-97
Specif ic ication fo for Th Threaded Co Couplings, St Steel, Bl Black or or Zi Zinc-Coated (G (Galvanized) We Welded or or Se Seamless, fo for Use in Steel Pipe Joints
A87 A872 2
A87 A872-9 2-91 (199 (1997) 7)
Spec Specif ific ica ation tion for for Cent Centri rifu fuga gall llyy Cas Cast Ferri erriti tic/ c/Au Aussteni teniti ticc Stai Stainl nles esss Stee Steell Pipe Pipe for for Corr Corros osiv ivee Envi Enviro ronm nmen ents ts
A88 A885 5
A885 A885/A /A88 885M 5M-9 -96 6
Spec Speciifica ficati tion on for for Ste Steeel Shee Sheet, t, Zi Zinc and and Aram Aramiid Fib Fiber Com Comp posit ositee Coa Coatted fo for Corr Corru ugated St Steel eel Se Sewer, er, Culvert, and Underdrain Pipe
A888
A888-98e1
Specific fication for Hu Hubless Cast Iron Soil Pi Pipe an and Fi Fittings fo for Sa Sanitary and St Storm Dr Drain, Wa Waste, an and Ve Vent Piping Applications
A926
A926-97
Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A92 A928 8
A928 A928/A /A92 928M 8M-9 -98 8
Spec Specif ific ica ation tion for for Fer Ferri riti tic/ c/Au Aussteni teniti ticc (Du (Dupl plex ex)) Sta Stain inle less ss Stee Steell Pip Pipee Ele Elect ctri ricc Fus Fusio ion n Wel Welde ded d wit with h Add Addit itio ion n of of Filler Metal
A92 A929 9
A929 A929/A /A92 929M 9M-9 -97 7
Spec pecifi ificat cation ion fo for St Steel eel Sh Sheet, eet, Me Metall tallic ic-C -Co oated by the Ho Hot-Di t-Dip p Pr Process cess for for Cor Corru ruga gate ted d Ste Steel el Pipe Pipe
A930
A930-99
Practice for Li Life-Cycle Co Cost Analysis of Co Corrugated Metal Pi Pipe Us Used fo for Cu Culver ts ts, St Storm Se Sewers, an and Ot Other Buried Conduits
A94 A943 3
A943 A943/A /A94 943M 3M-9 -95e 5e1 1
Spec pecifi ificat cation ion fo for Spr Spray-F y-Forme ormed d Sea Seaml mles esss Aus Austen tenitic itic Stai Stain nless less Stee Steell Pipe Pipess
A94 A949 9
A949 A949/A /A94 949M 9M-9 -95e 5e1 1
Spec Specif ific ica ation tion for for Spra Sprayy-FForme ormed d Seam Seamle less ss Ferri erriti tic/ c/Au Aussteni teniti ticc Stai Stainl nles esss Stee Steell Pipe Pipe
A954
A954-96
Specif ication fo for Au Austenitic Ch Chromium-Nickel-Silicon Al Alloy St Steel Se Seamless an and We Welded Pi Pipe
A972
A972/A972M-99
Specif ic ication for Fusion Bonded Epoxy-Coated Pipe Piles
A97 A978 8
A97 A978/A9 8/A97 78M-9 8M-97 7
Spec Specif ific ica ation tion for for Com Compo posi site te Ribb Ribbed ed Stee Steell Pip Pipe, e, Prec Precoa oate ted d and and Polye olyeth thyl ylen enee Lin Lined ed for for Gra Gravi vity ty Flow Flow Sani Sanita tary ry Sewers, Storm Sewers, and Other Special Applications
A98 A984 4
A984 A984/A /A98 984M 4M-0 -00 0
Spec pecifi ificat cation ion for for Stee Steell Line ine Pip Pipe, Bla Black, ck, Plai Plain n-En -End, Elect lectri ricc-R Resis esista tanc ncee-Wel -Welde ded d
A99 A998 8
A998 A998/A /A99 998M 8M-9 -98 8
Prac Practi tice ce for for Str Struc uctu tura rall Des Desig ign n of Rein Reinfo forc rcem emen ents ts for for Fit Fitti ting ngss in in Fa Factor ctoryy-Ma Made de Corr Corrug uga ated ted Stee Steell Pip Pipee for for Sewers and Other Applications Applications
A999
A999/A999M-9 M-98
Specific fication fo for Ge General Re Requirements fo for Al Alloy an and St Stainless St Steel Pi Pipe
A1 A1005 005
A100 A1005/ 5/A1 A100 005M5M-00 00
Spec Specifi ifica cati tion on for for Ste Steel el Line Line Pipe Pipe,, Bla Black ck,, Pla Plain in End, End, Long Longit itud udin inal al and and Hel Helic ical al Seam Seam,, Dou Doubl blee Sub Subme merg rged ed-A -Arc rc Welded
A1 A1006 006
A100 A1006/ 6/A1 A100 006M 6M-0 -00 0
Spec Specif ific ica ation tion for for Cor Corru ruga gate ted d Ste Steel el Stru Struct ctur ural al Pla Plate, te, Zin Zincc-Co Coa ated, ted, for for Fie Field ld-B -Bol olte ted d Pip Pipe, e, Pipe Pipe-A -Arrches ches,, and and Arches
Spec Specif ific ica ation tion for for Stee Steell Line Line Pipe Pipe,, Bla Black, ck, Plai Plain n End, End, Lase Laserr Beam Beam Welde elded d
G r oup of AS T M S t andar d s f o r S t eel Pipes, T ubes and F ittings STEEL TUBES - Boiler, Superheater, and Miscellaneous Tubes A17 A178
A17 A178/A17 8/A178M-95
Specification for Electric-Resistance-Welded Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A17 A179
A17 A179/A17 9/A179M-90a (1996) (1996) e1
Specificat Specification ion for Seamless Seamless Cold-Draw Cold-Drawn n Low-C Low-Carbon arbon Steel Steel Heat-E Heat-Exch xchanger anger and Condenser Condenser Tubes
A192 A192
A192/ A192/A1 A192M 92M-9 -91 1 (1996 (1996)) e1
Specifi Specifica catio tion n for for Seaml Seamless ess Carbon Carbon Steel Steel Boil Boiler er Tube Tubess for for High High-Pr -Press essure ure Servic Servicee
A2 A209
A209 A209/A /A20 209M 9M-9 -98 8
Spec Speciifica ficati tion on for for Seaml eamles esss Carb Carbon on-M -Mol olyb ybde den num Allo Alloyy-S Stee teel Boil Boiler er and Super uperh heat eater Tubes ubes
A210
A210/A210M-9 M-96
Specific fication fo for Se Seamless Me Medium-Carbon St Steel Bo Boiler an and Su Superheater Tu Tubes
A2 A213
A21 A213/A2 3/A21 13M-9 3M-99a 9a
Spec Specif ific ica ation tion for for Sea Seaml mles esss Fer Ferri riti ticc and and Aus Austeni teniti ticc All Alloy oy-S -Ste teel el Boil Boiler er,, Sup Super erhe hea ater ter, and and Hea Heat-Ex t-Exch chan ange gerr Tubes
A24 A249 9
A249 A249/A /A24 249M 9M-9 -98e 8e1 1
Spec Specif ific ica ation tion for for Wel Welde ded d Aust Austen enit itic ic Ste Steel el Boi Boile lerr, Supe Superh rhea eate terr, Hea Heat-Ex t-Exch chan ange gerr, and and Cond Conden ense serr Tub Tubes es
A2 A250
A250 A250/A /A25 250M 0M-9 -95 5
Spec Speciifica ficati tion on for for Elec Electr triic-R c-Resi esistan tance-W ce-Weelde lded Fer Ferri rittic Allo Alloyy-S Stee teel Boil Boiler er and and Sup Super erh heat eater Tub Tubes es
A254
A254-97
Specif ication for Copper-Brazed Steel Tubing
A26 A268 8 A269
A268 A268/A /A26 268M 8M-9 -96 6 A269-98
Spec Specif ific ica ation tion for for Seam Seamle less ss and and Welde elded d Ferri erriti ticc and and Mart Marten ensi siti ticc Stai Stainl nles esss Stee Steell Tubin ubing g for for Gene Genera rall Serv Servic icee Specif ication for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270
A270-98ae1
Specif ic ication for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A3 A334
A334 A334/A /A33 334M 4M-9 -99 9
Spec Speciifica ficati tion on for for Sea Seaml mles esss an and Wel Welde ded d Car Carbo bon n and and Allo Alloyy-St Stee eell Tu Tubes bes for for Low-T w-Temp empera erature ure Ser Servi vice ce
A423
A423/A423M-95
Specific fication for Seamless and Elect lectrric-Welde lded Low-All -Allo oy Steel Tubes
A45 A450 0
A450 A450/A /A45 450M 0M-9 -96a 6a
Spec Specif ific ica ation tion for for Gen Gener eral al Requ Requir irem emen ents ts for for Car Carbo bon, n, Ferri erriti ticc All Alloy oy,, and and Aus Austeni teniti ticc Allo Alloyy Stee Steell Tub Tubes es
A60 A608 8
A608 A608-9 -91a 1a (199 (1998) 8)
Spec Specif ific ica ation tion for for Cen Centr trif ifug ugal ally ly Cas Cast Iro Ironn-Ch Chro romi mium um-N -Nic icke kell Hig Highh-Al Allo loyy Tub Tubin ing g for for Pres Pressu sure re Appl Applic ica ation tion at High Temperatures
A618
A618-99
Specif ication fo for Ho Hot-Formed We Welded an and Se Seamless Hi High-Strength Lo Low-Alloy St Structural Tu Tubing
A632
A632-98
Specif ic ication for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A688
A688/A688M-98
Specific fication fo for We Welded Au Austenitic St Stainless St Steel Fe Feedwater He Heater Tu Tubes
A7 A771
A77 A771/A7 /A771M-9 1M-95 5
Spec Speciifica ficati tion on for for Sea Seaml mles esss Aus Austeni enitic and and Mar Marttensi ensittic St Stain ainless less Ste Steel el Tub Tubin ing g for for Liq Liquid Met Metal al-C -Coo oole led d Reactor Core Components
A778
A778-98
Specif ication for We Welded, Un Unanneled Au Austenitic Stainless Steel Tu Tubular Pr Products
A7 A789
A789 A789/A /A7 789M89M-00 00
Spec Specif ific ica ation tion for for Seam Seamle less ss and and Welde elded d Ferri erriti tic/ c/Au Aussteni teniti ticc Stai Stainl nles esss Stee Steell Tubin ubing g for for Gene Genera rall Serv Servic icee
A803
A803/A803M-98
Specific fication fo for We Welded Fe Ferritic St Stainless St Steel Fe Feedwater He Heater Tu Tubes
A82 A822 2
A822 A822-9 -90 0 (199 (1995) 5) e1
Spec Specif ific ica ation tion for for Seam Seamle less ss Cold Cold-D -Dra rawn wn Carb Carbon on Stee Steell Tubin ubing g for for Hydr Hydrau auli licc Sys System tem Serv Servic icee
A82 A826 6
A826 A826/A /A82 826M 6M-9 -95 5
Spec Specif ific ica ation tion for for Seam Seamle less ss Aus Austeni teniti ticc and and Marte artens nsit itic ic Stai Stainl nles esss Stee Steell Duct Duct Tubes ubes for for Liqu Liquid id Metal etal-C -Coo oole led d Reactor Core Components
A847
A847-99a
Specif ic ication for Co Cold-Formed We Welded an and Se Seamless Hi High Strength, Lo Low Alloy St Structural Tu Tubing with Improved Atmospheric Corrosion Resistance
A908
A908-91 (1998)
Specif ication for Stainless Steel Needle Tubing
A953
A953-96
Specif ication fo for Au Austenitic Ch Chromium-Nickel-Silicon Al Alloy St Steel Se Seamless an and We Welded Tu Tubing
Mechanical Tubes A17 A179
A17 A179/A17 9/A179M-90a (1996) (1996) e1
A213
A213/A213M-99a A213/A213M-99a
A214 A214
A214/A21 A21 4/A214M-96 4M-96
A249
A249/A249M-98e1
A498
A498-98
A851
A851-96 A851 -96
Specificat Specification ion for Seamles Seamlesss Cold-Dra Cold-Drawn wn Low-C Low-Carbon arbon Steel Steel Heat-Ex Heat-Exchang changer er and and Condense Condenserr Tubes Tubes Specification Specif ication for Seamless Seamles s Ferritic and Austenitic Alloy-Steel Alloy -Steel Boiler, Superheater, and Heat-Exchanger Tubes Specification Specif ication for Electric-Resistanc Electr ic-Resistance-Welded e-Welded Carbon Steel Heat-Exchanger and Condenser Tubes Specification for Welded Austenitic Steel Boiler, Superheater, Superheater, Heat-Exchanger, Heat-Exchanger, and Condenser Tubes Specification for Seamless and Welded Carbon, Ferritic, and Austenitic Austenitic Alloy Steel Heat-Exchanger Heat-Exchanger Tubes Tubes with Integral Fins Specification Specif ication for High-Frequency Induction Inducti on Welded, Unannealed, Unanneal ed, Austenitic Steel Condenser Tubes
G r oup of AS T M S t andar d s f o r S t eel Pipes, T ubes and F ittings Heat-Exchanger and Condenser Tubes
A511 A511
A511 A51 1-96
Specification Specif ication for Seamless Seamles s Stainless Stainles s Steel Mechanical Tubing
A512
A512-96 A51 2-96
Specification Specif ication for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A513
A513-98 A51 3-98
Specification Specif ication for Electric-Resistan Electr ic-Resistance-Welded ce-Welded Carbon and Alloy Steel Mechanical Tubing
A519 A519
A519-96 A51 9-96
Specification Specif ication for Seamless Seamles s Carbon and Alloy Steel Mechanical Tubing
A554
A554-98e1
Specification for Welded Stainless Steel Mechanical Tubing
Structural Tubes A500
A500-99
A501
A501-99 A501 -99
A847
A847-99a A847 -99a
A618-99 A61 8-99
A618 A618
Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes Specification Specif ication for Hot-Formed Welded and Seamless Seamles s Carbon Steel Structural Structura l Tubing Specification Specif ication for Cold-Formed Welded and Seamless Seamles s High Strength, Low Alloy Structural Structura l Tubing with Improved Atmospheric Corrosion Resistance Specification Specif ication for Hot-Formed Welded and Seamless Seamles s High-Strength Low-Alloy Low-Allo y Structural Structura l Tubing
Welding Fittings A234
A234/A234M-99
Specification for Piping Fittings of Wrought Wrought Carbon Steel and Alloy Steel for Moderate Moderate and High Temperature Service
A403
A403/A403M-99a
Specification for Wrought Wrought Austenitic Stainless Steel Piping Fittings
A420
A420/A420M-99
Specification for Piping Fittings of Wrought Wrought Carbon Steel and Alloy Steel for Low-Temperatu Low-Temperature re Service
A758
A758/A758M-98 A758/A758M-98
Specification Specif ication for Wrought-Carbon Wrought-Carbo n Steel Butt-Welding Butt-Weld ing Piping Fittings with Improved Notch Toughness
A774 A774
A774/A77 A77 4/A774M-98 4M-98
Specification Specif ication for As-Welded Wrought Austenitic Stainless Stainles s Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
G r oup of AS T M S t andar d s f o r S t eel Plat e , Shee t , S t r ip and W i r e This group of ASTM standards covers steel plates, sheets and strips used in various applications, properties of assorted types of stainless and heat resisting resisting steel wires, drawn galvanized wires for mechanical springs, alloy steel coarse round wires and industrial sizing screens. This group of ASTM standards covers the requirements to be met by: 1. Steel plate, sheet, and strip used in various applications 2. The properties of assorted types of steel wire, e.g., stainless and heat resisting resisting steel wire, drawn galvanized wire for mechanical springs, and alloy steel coarse round wire 3. Industrial sizing screens.
STEEL PLATE, SHEET AND STRIP A1 A109
A109 A109/A /A1 109M09M-98 98a a
Speci pecifi fica cattion ion for for Stee Steel,l, Stri Strip p, Carb Carbon on (0.2 (0.25 5 Maxi aximum mum Perce ercen nt), t), Cold Cold-R -Rol olle led d
A167
A167-99
Specif ication fo for St Stainless an and He Heat-Resisting Ch Chromium-Nickel St Steel Pl Plate, Sh Sheet , and St Strip
A176
A176-99
Specif ication for Stainless and Heat-Resisting Chromium Steel Plate, Sheet , and Strip
A24 A240 0
A240 A240/A /A24 240M 0M-0 -00 0
Spec Specif ific ica ation tion for for Hea Heat-Re t-Resi sissting ting Chro Chromi mium um and and Chro Chromi mium um-N -Nic ick kel Stai Stainl nles esss Stee Steell Pla Plate, te, Shee Sheet, t, and and Stri Strip p for Pressure Vessels
A262
A262-98
Practices fo for De Detecting Su Susceptibility to to In Intergranular At Attack in in Au Austenitic St Stainless St Steels
A2 A263
A263 A263-9 -94a 4a (199 (1999 9)
Spec Speciifica ficattion ion for for Corr orrosi osion-R on-Res esiisting ting Chro hromiu mium Stee teel-C l-Clad lad Pla Plate, te, Sheet, eet, and and Stri Strip p
A264
A264-94a (1 (1999)
Specific fication fo for St Stainless Ch Chromium-Nickel St Steel-C l-Clad Pl Plate, Sh Sheet, an and St Strip
A265
A265-94a (1 (1999)
Specif ic ication fo for Ni Nickel an and Ni Nickel-Base Al Alloy -C -Clad St Steel Pl Plate
A345
A345-98
Specif ication for Flat-Rolled Electrical Steels for Magnetic Applications
A36 A366 6
A366 A366/A /A36 366M 6M-9 -97e 7e1 1
Spec Specif ific ica ation tion for for Comm Commer erci cial al Stee Steell (CS) (CS) Shee Sheet, t, Carb Carbon on (0.1 (0.15 5 Maxi Maximu mum m Perce ercent nt)) Cold Cold-R -Rol olle led d
A370
A370-97a
Test Methods and Def initions for Mechanical Testing of Steel Products
A380
A380-99e1
Practice for Clea leaning, Descaling, and Passivation of Stainles less Steel Parts rts, Equipment, and Systems
A414
A414/A414M-00
Specif ic ication for Steel, Sheet , Carbon, for Pressure Vessels
A4 A417
A41 A417-93 -93 (1 (1998) 98)
Speci pecifi fica cattion ion for for Stee Steell Wir Wire, e, Coldold-Dr Dra awn, for for Zig Zig-Z -Za ag, Squ Squar aree-FFormed rmed,, and and Sinuo inuous us--Type ype Up Uphols holsttery ery Spring Units
A424
A424-00
Specif ication for Steel, Sheet , for Porcelain Enameling
A48 A480 0
A480 A480/A /A48 480M 0M-9 -99b 9b
Spec Specif ific ica ation tion for for Gen Gener eral al Requ Requir irem emen ents ts for for Fla Flatt-Ro Roll lled ed Stai Stainl nles esss and and Hea Heat-Re t-Resi sissting ting Stee Steell Pla Plate te,, She Sheet, et, and Strip
A505
A505-00
Specif ic ication for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A5 A506
A506 A506-9 -93 3 (1 (1998 998)
Speci pecifi fica cattion ion for for Stee Steel,l, Shee Sheett an and Str Strip ip,, All Alloy oy,, Ho Hot-R t-Rolle olled d an and Co Cold-R ld-Ro olled lled,, Reg Regu ular lar Qua Quali litty an and St Struct ructu ural Quality
A5 A507
A507 A507-9 -93 3 (1998) 998)
Spec Speciifica ficati tion on for for Stee teel, Shee heet and and Stri trip, Allo Alloyy, HotHot-R Rolle olled d and and Coldold-Ro Roll lled ed,, Dra Drawing ing Qua Quality lity
A56 A568 8
A568 A568/A /A56 568M 8M-0 -00 0
Spec Specif ific ica ation tion for for Stee Steel,l, Shee Sheet, t, Carb Carbon on,, and and Hi High gh-S -Str tren engt gth, h, Low-A ow-All lloy oy,, HotHot-Ro Roll lled ed and and Cold Cold-R -Rol olle led, d, Gene Genera rall Requirements for
A56 A569 9 A570
A569 A569/A /A56 569M 9M-9 -98 8 A570/A570M-9 M-98
Spec Specif ific ica ation tion for for Stee Steel,l, Carb Carbon on (0.1 (0.15 5 Maxim aximum um,, Perce ercent nt), ), HotHot-Ro Roll lled ed Shee Sheett and and Stri Strip p Comm Commer erci cial al Qual Qualit ityy Specific fication fo for St Steel, Sh Sheet an and St Strip, Ca Carbo rbon, Ho Hot-Rolled, St Struct ructu ural Qu Quality
A6 A604
A604 A604-9 -93 3 (199 (1998 8)
Test est Metho ethod d for for Macroet roetch ch Test esting ing of Cons Consum umab able le Elec Electtrode ode Reme Remelt lteed Stee Steell Bar Bars and and Bill Billet etss
A606
A606-98
Specif ic ication for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A607
A607-98
Specif ic ication fo for St Steel, Sh Sheet an and St Strip, Hi High-Strength, Lo Low-Alloy, Co Columbium or Va Vanadium, or or Bo Both, Ho HotRolled and Cold-Rolled
A611
A611-97
Specif ication for Structural Steel (SS), Sheet , Carbon, Cold-Rolled
A620
A620/A620M-97
Specif ic ication fo for Dr Drawing St Steel (D (DS), Sh Sheet , Carbon, Co Cold-Rolled
A622
A622/A622M-97
Specific fication for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolle lled
A6 A635
A635 A635/A /A63 635M 5M-9 -98 8
Speci ecifica ficattion ion for for Stee Steel,l, Shee Sheett and Strip trip,, Heavy eavy--Thi Thickne cknesss Coils oils,, Carbo arbon, n, Hot-R t-Rolle olled d
A6 A659
A659 A659/A /A65 659M 9M-9 -97 7
Speci pecifi fica cattion ion fo for Com Comme merrcial cial Stee Steell (C (CS), S), Sh Sheet eet an and St Strip rip, Ca Carbon rbon (0. (0.16 Max Maxim imu um to to 0.2 0.25 5 Max Maxim imu um Percent), Percent), Hot-Rolled
A666
A666-00
Specif ic ication for Annealed or Cold-Worked Austenitic Stainless Steel Sheet , Strip, Plate, and Flat Bar
G r oup of AS T M S t andar d s f o r S t eel Plat e, e, Shee t , S t r ip and W i r e A6 A682
A682 A682/A /A68 682 2M-98 M-98a a
Spec Speciifica ficattion ion for for Stee teel, Strip trip,, Hig High h-Car -Carbo bon n, Co Coldld-Roll Rolled ed,, Gen Geneeral Requi equirremen ements ts For
A68 A684 4
A684 A684/A /A68 684M 4M-8 -86 6 (1 (1998) 998)
Spec Specif ific ica ation tion for for Ste Steel el,, Str Strip ip,, Hig Highh-Ca Carb rbon on,, Col Coldd-Ro Roll lled ed
A6 A693
A693 A693-9 -93 3 (1 (1999 999)
Spec Speciifica ficati tion on for for Pr Precip cipitat tationion-H Harde ardeni ning ng Stai tainles nlesss an and He Heat-R t-Resi esisting ting Stee teel Pla Plate te,, Sh Sheet, eet, an and St Strip rip
A700
A700-99
Practices fo for Pa Packaging, Ma Marking, an and Lo Loading Me Methods fo for St Steel Pr Products fo for Do Domestic Sh Shipment
A702
A702-89 (1 (1994) e1 e1
Specific fication fo for St Steel Fe Fence Po Posts an and As Assemblie lies, Ho Hot Wr Wrought
A715
A715-98
Specif ic ication fo for St Steel Sh Sheet an and St Strip, Hi High-Strength, Lo Low-Alloy, Ho Hot-Rolled, an and St Steel Sh Sheet , Cold-Rolled, High-Strength, High-Strength, Low-Alloy, with Improved Formability
A7 A749
A749 A749/A /A7 749M49M-97 97
Spec Specif ific ica ation tion for for Stee Steel,l, Stri Strip, p, Carb Carbon on and and Hi High gh-S -Str tren engt gth, h, Low-A ow-All lloy oy,, HotHot-Ro Roll lled ed,, Gene Genera rall Requ Requir irem emen ents ts for for
A751
A751-96
Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A7 A763
A763 A763-9 -93 3 (1 (1999) 999) e1
Prac Practi tice cess for for Dete Detect ctin ing g Susc Suscep epti tibi bili lity ty to Inte Interg rgra ranu nula larr Att Attac ack k in in Fer Ferri riti ticc Sta Stain inle less ss Stee Steels ls
A793
A793-96
Specif ication for Rolled Floor Plate, Stainless Steel
A794
A794-97
Specif ic ication fo for Co Commercial St Steel (C (CS), Sh Sheet , Carbon (0 (0.16% Ma Maximum to to 0. 0.25% Ma Maximum), Co ColdRolled
A829
A829/A829M-95
Specif ic ication for Alloy Structural Steel Plates
STEEL WIRE A227
A227/A227M-99
Specif ic ication fo for St Steel Wi Wire, Co Cold-Drawn fo for Me Mechanical Sp Springs
A228
A228/A228M-93
Specif ic ication for Steel Wire, Music Spring Quality
A229
A229/A229M-9 M-99
Specific fication for Steel Wire, Oil Oil-Tempered for Mechanical Sprin rings
A230
A230/A230M-99
Specific fication for Steel Wire, Oil-T l-Tempered Carbon Valve Spring Quality
A231
A231/A231M-96
Specif ic ication for Chromium-Vanadium Alloy Steel Spring Wire
A232
A232/A232M-99
Specific fication fo for Ch Chromium-Vanadium Al Alloy loy St Steel Va Valve Sp Spring Qu Quality Wi Wire
A313
A313/A313M-98
Specif ication for St Stainless Steel Sp Spring Wire
A368
A368-95a
Specif ication for Stainless Steel Wire Strand
A401
A401/A401M-98
Specif ication fo for St Steel Wi Wire, Ch Chromium-Silicon Al Alloy
A407
A407-93 (1 (1998)
Specif ic ication for St Steel Wi Wire, Co Cold-Drawn, fo for Co Coiled-Type Sp Springs
A478
A478-97
Specif ication for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A492
A492-95
Specif ication for Stainless Steel Rope Wire
A493
A493-95
Specif ication for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A510M
A510M-0 M-00
Specific fication for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel [Metric]
A510
A510-00
Specif ication for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A555
A555/A555M-9 M-97
Specific fication fo for Ge General Re Requirements fo for St Stainles less St Steel Wi Wire an and Wi Wire Ro Rods
A580
A580/A580M-98
Specif ication for Stainless Steel Wire
A581
A581/A581M-9 M-95b
Specific fication fo for Fr Free-Ma -Machining St Stainless St Steel Wi Wire an and Wi Wire Ro Rods
A679
A679/A679M-00
Specif ic ication fo for St Steel Wi Wire, Hi High Te Tensile St Strength, Co Cold Dr Drawn
A713
A713-93 (1 (1998)
Specific fication fo for St Steel Wi Wire, Hi High-Carbon Sp Spring, fo for He Heat-Treated Co Components
A7 A752M 52M
A752 A752MM-93 93 (199 (1998) 8)
Spec Specif ific ica ation tion for for Gen Gener eral al Requ Requir irem emen ents ts for for Wir Wiree Rod Rodss and and Coar Coarse se Roun Round d Wir Wire, e, Allo Alloyy Ste Steel el [Met [Metri ric] c]
A752
A752-93 (1 (1998)
Specific fication fo for Ge General Re Requirements fo for Wi Wire Ro Rods an and Co Coarse Ro Round Wi Wire, Al Alloy St Steel
A764
A764-95
Specif ic ication for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A805
A805-93 (1998)
Specif ication for Steel, Flat Wire, Carbon, Cold-Rolled
G r oup of AS T M S t andar d s f o r S t eel Cas tings and Fo orr gings This group of ASTM specifications covers standard standard properties of steel and iron castings and forgings for valves, flanges, fittings, and other pressure containing parts for high-temperature high-temperature and low-temperature service. Additionally, in the table below standards for evaluating the microstructure of graphite in iron castings and methods for mechanical testing of cast irons are presented.
STEEL CASTINGS A27
A27/A27M-95
Specific fication for Steel Castings, Carbon, for General Applic lication
A47
A47/A47M-99
Specif ication for Ferritic Malleable Iron Castings
A48M
A48M-94e1
Specif ication for Gray Iron Castings [Metric]
A 48
A48-94ae1
Specif ication for Gray Iron Castings
A74
A74-98
Specif ication for Cast Iron Soil Pipe and Fittings
A126
A126-95e1
Specif ication for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A1 A128
A128 A128/A /A1 128M28M-93 93 (199 (1998) 8)
Spec Specif ific ica ation tion for for Ste Steel el Cas Casting tings, s, Aus Austeni teniti ticc Man Manga gane nese se
A1 A148
A148 A148/A /A1 148M48M-93 93b b (199 (1998) 8)
Spec Specifi ifica cati tion on for for Ste Steel el Cas Casti ting ngs, s, Hig High h Str Stren engt gth, h, for for Str Struc uctu tura rall Purp Purpos oses es
A159
A159-83 (1993)
Specif ication for Automotive Gray Iron Castings
A21 A216
A21 A216/A21 6/A216M6M-93 93 (1998 (1998))
Specifi Specifica catio tion n for Steel Steel Cast Casting ings, s, Carbon Carbon,, Sui Suitab table le for Fusion usion Weldi Welding ng,, for for Hig Highh- Tempera emperatur turee Servic Servicee
A2 A217
A21 A217/A2 7/A21 17M-9 7M-99 9
Spec Specif ific ica ation tion for for Stee Steell Cas Casting tings, s, Mart Marten ensi siti ticc Stai Stainl nles esss and and Allo Alloy, y, for for Pres Pressu sure re-- Cont Contai aini ning ng Parts arts,, Suit Suitab able le for High-Temperature Service
A247
A247-67 (1998)
Test Method for Evalua luating the Microstructure of Graphite in Iron Castings
A27 A278 8M
A27 A278M-9 8M-93e 3e1 1
Speci pecifi fica cattion ion for for Gra Gray Iron Iron Cas Casting ings for for Pres Pressu surre-C e-Conta ontaiining ing Parts arts for for Temp empera erature ures Up to 350 C
A278
A278-93
Specif ication fo for Gr Gray Ir Iron Ca Castings fo for Pr Pressure-Containing Pa Parts fo for Te Temperatures Up Up to to 65 650 F
A297 A297
A297/A A29 7/A297 297M-9 M-97 7 (1 (1998 998))
Specifi Specifica catio tion n for Steel Steel Cast Casting ings, s, Iron-C Iron-Chro hromiu mium m and and Iron-C Iron-Chr hromi omiumum-Nic Nickel kel,, Hea Heatt Resis Resistan tant,t, for for Gener General al Application
A3 A319 A327M
A31 A319-7 9-71 (1 (1995) 95) A327M-9 M-91 (1 (1997)
Speci pecifi fica cattion ion fo for Gr Gray Ir Iron Cas Casting ings fo for Ele Elevvated Temper mpera atures ures for for No Non-P n-Pressu essurre Con Conta taiining ning Parts arts Test Me Methods for Im Impact Testing of Ca Cast Ir Irons (Metric)
A 327
A327-91 (1997)
Test Methods for Impact Testing of Cast Irons
A35 A351
A351/A A35 1/A35 351M-9 1M-94a 4a (1 (1999 999))
Specifi Specifica catio tion n for for Cast Casting ings, s, Aus Austen teniti itic, c, Aus Austen teniti itic-F c-Ferr erriti iticc (Dup (Duplex lex),), for for Pres Pressur sure-C e-Cont ontain aining ing Parts Parts
A352 A352
A352/A A35 2/A352 352M-9 M-93 3 (1 (1998 998))
Specifi Specifica catio tion n for for Steel Steel Cast Casting ings, s, Ferri Ferritic tic and Marten Martensit sitic, ic, for Press Pressur ure-C e-Cont ontain aining ing Parts, Parts, Suitab Suitable le for LowLow Temperature Service
A35 A356 6
A356 A356/A /A35 356M 6M-9 -98e 8e1 1
Spec Specif ific ica ation tion for for Ste Steel el Cas Casti ting ngs, s, Car Carbo bon, n, Lo Low Allo Alloy, y, and and Sta Stain inle less ss Ste Steel el,, Heav Heavyy-W Walle alled d for for Stea Steam m Tur Turbi bine ness
A 36 7
A367-60 (1999)
Test Methods of Chill Testing of Cast Iron
A389 A389
A389/A A38 9/A389 389M-9 M-93 3 (1998 (1998))
Specifi Specifica catio tion n for for Steel Steel Cas Castin tings, gs, Alloy Alloy,, Speci Specially ally HeatHeat-TTreated reated,, for for Press Pressure ure-Co -Conta ntaini ining ng Parts, Parts, Suitab Suitable le for High-Temperature Service
A39 A395 5
A395 A395/A /A39 395M 5M-9 -99 9
Spec Specif ific ica ation tion for for Ferri erriti ticc Duct Ductil ilee Iron Iron Pres Pressu sure re-R -Ret etai aini ning ng Cas Casting tingss for for Use Use at Elev Eleva ated ted Tempe empera ratu ture ress
A42 A426 6
A426 A426-9 -92 2 (1 (1997) 997)
Speci pecifi fica cattion ion fo for Ce Centri ntrifu fuga gall llyy Ca Cast Ferri errittic Allo Alloyy Ste Steel Pipe Pipe for for Hi Highgh-Tempe mperatur ture Ser Servi vicce
A 436
A436-84 (1997) e1
Specif ic ication for Austenitic Gray Iron Castings
A 438
A438-80 (1997)
Test Method for Transverse Testing of Gray Cast Iron
A 439
A439-83 (1999)
Specif ication for Austenitic Ductile Iron Castings
A44 A447
A447/A A44 7/A44 447M7M-93 93 (1998 (1998))
Specifi Specifica catio tion n for for Steel Steel Cast Casting ings, s, Chrom Chromium ium-Ni -Nick ckelel-Iro Iron n Allo Alloyy (25(25-12 12 Class) Class),, for for Hig Highh-TTempera emperatur turee Serv Servic icee
A45 A451 1
A45 A451-93 -93 (1997) 997)
Spec Specif ifiicat cation ion for for Cent Centri rifu fug gally ally Cast Aus Austeni teniti ticc Stee teel Pipe ipe for for High igh-Temp empera erature ure Serv Serviice
A4 A476M
A47 A476M-84 M-84 (199 (1993) 3)
Speci ecifica ficati tion on for for Du Ductil ctilee Ir Iron Cas Casting tingss for for Paper per Mil Milll Dry Dryer er Rolls olls [Metri etric] c]
A476
A476-90 (1997)
Specif ic ication for Ductile Iron Castings for Paper Mill Dryer Rolls
A48 A487 7
A487 A487/A /A48 487M 7M-9 -93 3 (199 (1998) 8)
Spec Specif ific ica ation tion for for Ste Steel el Cas Casti ting ngss Suit Suitab able le for for Pre Press ssur uree Serv Servic icee
A48 A488 8
A488 A488/A /A48 488M 8M-9 -99 9
Pra Practi ctice for for Stee Steell Casting tings, s, Weldi eldin ng, Qual Qualif ifiicat cations ions of Proced ocedu ures and Perso ersonn nnel el
A 49 4
A494/A494M-00
Specif ication for Castings, Nickel and Nickel Alloy
A518
A518/A518M-9 M-99
Specific fication for Corrosion-Resistant High-Silicon Iron Castings
A532 A532
°
°
A532/A A53 2/A532 532M-9 M-93a 3a (1999 (1999)) e1 Specifi Specifica catio tion n for Abras Abrasion ion-Re -Resis sistan tantt Cast Cast IronsA IronsA
G r oup of AS T M S t andar d s f o r S t eel Cas tings and Fo r gings 536
A536-84 (1999) e1
Specif ication for Ductile Iron Castings
A56 A560 0
A560 A560/A /A56 560M 0M-9 -93 3 (199 (1998) 8)
Spec Specif ific ica ation tion for for Cas Casting tings, s, Chro Chromi mium um-N -Nic ick kel Allo Alloyy
A57 A571M 1M
A57 A571M-8 1M-84 4 (199 (1997) 7)
Spec Specif ific ica ation tion for for Aus Auste teni niti ticc Duct Ductil ilee Iron Iron Ca Casting tingss for for Pres Pressu sure re-C -Con onta tain inin ing g Par Parts ts Sui Suita tabl blee for for Low Low- Temperature Service [Metric]
A57 A571 1
A571 571-84 -84 (1 (1997) 997)
Speci pecifi fica cattion ion fo for Aus Austtenit enitic ic Duct Ductiile Iron Iron Casting tingss fo for Pr Pressu essurre-Co e-Cont ntai ain ning ing Par Parts ts Suita uitab ble for for Lo Low Temperature Service
A583
A583-93 (1999)
Specif ic ication for Cast Steel Wheels for Railway Service
A597
A597-87 (1999)
Specif ication for Cast Tool Steel
A602
A602-94 (1998)
Specif ic ication for Automotive Malleable Iron Castings
A60 A608 8
A608 A608-9 -91a 1a (199 (1998) 8)
Spec Specif ific ica ation tion for for Cen Centr trif ifug ugal ally ly Cas Cast Iron Iron-C -Chr hrom omiu iumm-Ni Nick ckel el Hi High gh-A -All lloy oy Tubin ubing g for for Pre Press ssur uree Appl Applic ica ation tion at High Temperatures
A609 A609
A609/A A60 9/A609 609M-9 M-91 1 (1 (1997 997))
Pract Practice ice for Cast Casting ings, s, Carbon Carbon,, LowLow-Allo Alloy, y, and Marten Martensit sitic ic Stainl Stainless ess Steel, Steel, Ultra Ultrason sonic ic Exami Examina natio tion n Ther Thereo eof f
A644
A644-98
Terminology Relating to Iron Castings
A66 A667 7
A667 A667/A /A66 667M7M-87 87 (199 (1998) 8)
Spec Specifi ifica cati tion on for for Cent Centri rifu fuga gall llyy Cas Castt Dual Dual Met Metal al (Gr (Gray ay and and Whit Whitee Cas Castt Iro Iron) n) Cyli Cylind nder erss
A7 A703
A703/A 03/A7 703M03M-99 99
Speci ecifica ficattion ion for for Stee Steell Castings ings,, Gen General eral Requ equirem iremeents, nts, for for Pres Pressu surre-C e-Conta ontaiining ing Parts arts
A7 A732
A732/A7 2/A732 32MM-98 98
Speci pecifi fica cattion ion for for Cas Casting tings, s, In Investm estmen ent, t, Car Carbo bon n an and Lo Low All Alloy oy Ste Steel for for Gen Gener eral al Ap Appli plicat cation, ion, an and Coba Cobalt lt Alloy for High Strength at Elevated Temperatures
A7 A743
A743 A743/A /A7 743M-9 43M-98a 8ae1 e1
Spec Specifi ifica cati tion on for for Cast Castin ings gs,, Iron Iron-C -Chr hrom omiu ium, m, Iron Iron-C -Chr hrom omiu iumm-Ni Nick ckel el,, Corr Corros osio ion n Resi Resist stan ant,t, for for Gene Genera rall Application
A7 A744
A744/A 44/A7 744M-9 4M-98 8a
Speci ecifica ficattion ion for for Cas Casting tings, s, Ir Iron-C on-Chr hro omiu mium-Ni m-Nick ckeel, Cor Corrrosio osion n Res Resista istant nt,, for for Sev Severe ere Serv Serviice
A747
A747/A747M-99
Specific fication for Steel Castings, Stainles less, Precipitation Hardening
A748 A748
A748/ A748/A7 A748M 48M-87 -87 (1998 (1998))
Specifi Specifica catio tion n for for Static Staticall allyy Cas Castt Chil Chilled led White White Iron-G Iron-Gra rayy Iron Iron Dual Dual Meta Metall Roll Rollss for for Pressu Pressure re Vessel essel Use
A7 A757
A757 A757/A /A7 757M57M-00 00
Spec Specif ific ica ation tion for for Ste Steel el Cas Casting tings, s, Ferri erriti ticc and and Mart Marten ensi siti tic, c, for for Pre Press ssur uree-Co Cont ntai aini ning ng and and Oth Other er Appl Applic ica ation tions, s, for Low-Temperature Service
A7 A781
A781/A7 1/A78 81M-9 1M-99a 9a
Speci ecifica ficattion ion for for Ca Casting tings, s, Ste Steeel and and All Alloy oy,, Comm Common on Requ equirem iremeents, nts, fo for Gen General eral In Indus dustri trial Use Use
A7 A799
A799 A799/A /A7 799M-9 99M-92 2 (199 (1997) 7)
Prac Practi tice ce for for Steel Steel Cast Castin ings gs,, Stain Stainle less ss,, Instr Instrum umen entt Cali Calibr brat atio ion, n, for for Esti Estima mati ting ng Fer Ferri rite te Con Conte tent nt
A800 A800
A800/A A80 0/A800 800M-9 M-91 1 (1997 (1997)) e1
Pract Practice ice for Stee Steell Cast Casting ing,, Austen Austeniti iticc Alloy Alloy,, Estim Estimat atin ing g Ferri Ferrite te Cont Content ent There Thereof of
A80 A802 2
A802 A802/A /A80 802M2M-95 95 (199 (1996) 6)
Prac Practi tice ce for for Ste Steel el Cast Castin ings gs,, Surf Surfac acee Acc Accep epta tanc ncee Sta Stand ndar ards ds,, Vis Visua uall Exa Exami mina nati tion on
A823
A823-99
Specif ication for Statically Cast Permanent Mold Gray Iron Castings
A834
A834-95
Specif ication for Co Common Re Requirements for Ir Iron Castings for Ge General In Industrial Us Use
A842
A842-85 (1997)
Specif ic ication for Compacted Graphite Iron Castings
A87 A872 2
A87 A872-9 2-91 (199 (1997) 7)
Spec Specif ific ica ation tion for for Cent Centri rifu fuga gall llyy Cas Cast Ferri erriti tic/ c/Au Aussteni teniti ticc Stai Stainl nles esss Stee Steell Pipe Pipe for for Corr Corros osiv ivee Envi Enviro ronm nmen ents ts
A87 A874
A874 874/A87 /A874M-9 4M-98 8
Speci ecifica ficattion ion for for Fer Ferri rittic Duct Ductil ilee Ir Iron Casting tingss Suit Suitab able le for for Lo Low-T w-Tempe emperratur ture Ser Servi vicce
A888
A888-98e1
Specific fication for Hubles less Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A89 A890 0
A890/ 890/A8 A890 90MM-99 99
Speci pecifi fica cattion ion fo for Ca Casting tings, s, Iron Iron-C -Chr hrom omiu iumm-Ni Nick ckel el-M -Mol olyb ybde denu num m Cor Corrrosi osion-R on-Res esiistant, ant, Dup Duple lexx (Austenitic/Ferritic) (Austenitic/Ferritic) for General Application
A89 A897M 7M A897M 897M-9 -90 0 (199 (1997 7)
Speci ecifica ficattion ion for for Aus Austemp temper ereed Duct Ductiile Iron Iron Casting tingss [Metri etric] c]
A897
A897-90 (1997)
Specif ic ication for Austempered Ductile Iron Castings
A90 A903 3
A903 A903/A /A90 903M 3M-9 -99 9
Spec Specif ific ica ation tion for for Stee Steell Cas Casting tings, s, Surf Surfa ace Accep ccepta tanc ncee Stan Standa dard rds, s, Magne agneti ticc Parti articl clee and and Liqu Liquid id Penet enetra rant nt Inspection
A91 A915
A91 A915/A9 5/A915M-93 5M-93 (1998 (1998))
Specifi Specifica catio tion n for Steel Steel Cast Casting ings, s, Carbon Carbon,, and and Alloy, Alloy, Chemi Chemical cal Requir Requireme ements nts Simila Similarr to to Standa Standard rd Wroug Wrought ht Grades
A942
A942-95
Specif ic ication for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
A957
A957-96
Specif ic ication for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A958
A958-96e1
Specific fication for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Wrought Grades
A985
A985-98a
Specif ic ication for St Steel In Investment Casting General Re Requirements, fo for Pressure-Containing Par ts ts
G r oup of AS T M S t andar d s f o r S t eel Cas tings and Fo orr gings A 993
A993-98
Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
A1002
A1002-99
Specif ication for Castings, Nickel-Aluminum Ordered Alloy
FORGINGS A105
A105/A105M-98 A105/A105M-98
Specification Specif ication for Carbon Steel Forgings for Piping Applications
A181 A181
A181/A18 A18 1/A181M-95b 1M-95b
Specification Specif ication for Carbon Steel Forgings, for General-Purpose General- Purpose Piping
A182 A182
A182/A1 A182/A182M-99 82M-99
A266
A266/A266M-99
Specification for Carbon Steel Forgings Forgings for Pressure Vessel Components
A275
A275/A275M-98
Test Method for Magnetic Particle Examination of Steel Forgings
A288
A288-91 (1998)
Specification Specif ication for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A289
A289/A289M-97
Specification for Alloy Steel Forgings Forgings for Nonmagnetic Nonmagnetic Retaining Rings for Generators Generators
A290
A290-95 (1999) (1999)
Specification for Carbon and Alloy Steel Forgings Forgings for Rings for Reduction Gears
A291
A291 A29 1-95 (1999) (1999)
Specification for Steel Forgings, Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A314 A314
A314-97 A31 4-97
Specification for Forged Forged or Rolled Alloy-Steel Pipe Flanges, Forged Forged Fittings, and Valves and Parts for High-Temperature Service
Specification Specif ication for Stainless Stainles s Steel Billets Billet s and Bars for Forging
A336
A336/A336M-99
A350
A350/A350M-99
Specification for Carbon and Low-Alloy Steel Forgings, Forgings, Requiring Notch Toughness Toughness Testing Testing for Piping Components
A369
A369/A369M-92
Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Tem High-Temperatur peraturee Service
A372
A372/A372M-99
Specification Specif ication for Carbon and Alloy Steel Forgings for Thin-Walled Thin-Walle d Pressure Vessels
A388
A388/A388M-95
Practice for Ultrasonic Examination Examination of Heavy Steel Forgings Forgings
A418 A418
A418-99 A41 8-99
Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A456
A456/A456M-99
Specification for Magnetic Particle Examination Examination of Large Crankshaft Crankshaft Forgings Forgings
A469
A469-94a (1999)
Specification Specif ication for Vacuum-Treated Vacuum-Treated Steel Forgings for Generator Rotors
A471 A471
A471 A47 1-94 (1999)
Specification Specif ication for Vacuum-Treated Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A472 A472
A472-98 A47 2-98
Test Method for Heat Stability Stabilit y of Steam Turbine Shafts and Rotor Forgings
A473 A473
A473-99 A473-99
Specification for Alloy Steel Forgings Forgings for Pressure and High-Te High-Temperatur mperaturee Parts
Specification Specif ication for Stainless Stainles s Steel Forgings
A484
A484/A484M-98
Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings Forgings
A493
A493-95
Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging Forging
A503
A503/A503M-99
Specification for Ultrasonic Examination Examination of Large Forged Crankshafts Crankshafts
A508
A508/A508M-95 A508/A5 08M-95 (1999)
A522
A522/A522M-95b
Specification for Forged Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A541
A541/A541M-95 (1999)
Specification Specif ication for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A565
A579
A565-97 A579-99
Specification Specif ication for Quenched and Tempered Vacuum-Treated Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
Specification for Martensitic Stainless Steel Bars, Forgings, Forgings, and Forging Forging Stock for High-Te High-Temperatur mperaturee Service Specification Specif ication for Superstrength Alloy Steel Forgings
A592
A592/A592M-89 (1999) (1999)
Specification for High-Strength High-Strength Quenched and Tempered Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A638
A638/A638M-00
Specification for Precipitation Precipitation Hardening Iron Base Superalloy Bars, Forgings, Forgings, and Forging Forging Stock for High-Temperature Service
A646
A646-95 (1999) (1999)
Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft Aircraft and Aerospace Aerospace Forgings Forgings
A649
A649/A649M-99
Specification for Forged Steel Rolls Used for Corrugating Corrugating Paper Machinery Machinery
A668
A668/A668M-96e1
Specification for Steel Forgings, Forgings, Carbon and Alloy, for General Industrial Use
G r oup of AS T M S t andar d s f o r S t eel Cas tings and Fo r gings A694
A705
A694/A694M-00 A705/A705M-95
Specification for Carbon and Alloy Steel Forgings Forgings for Pipe Flanges, Fittings, Valves, and Parts for HighPressure Transmission Service Specification Specif ication for Age-Hardening Age-Hardeni ng Stainless Stainles s Steel Forgings
A707
A707/A707M-00
Specification Specif ication for Forged Carbon and Alloy Steel Flanges for Low-Temperature Low-Temperature Service
A711 A711
A711 A71 1-92 (1996) e1
Specification Specif ication for Steel Forging Stock
A723
A723/A723M-94 (1999)
Specification Specif ication for Alloy Steel Forgings for High-Strength High-Strengt h Pressure Component Application
A727
A727/A727M-97
Specification Specif ication for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A730
A730-93 (1999)
Specification Specif ication for Forgings, Carbon and Alloy Steel, for Railway Use
A745 A745
A745/A745M-94 A745/A745M-94 (1999)
Practice for Ultrasonic Examination of Austenitic Steel Forgings
A765
A765/A765M-98 A765/A765M-98a a
A768
A768-95
A788
A788-98a
Specification Specif ication for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Pressure-Vessel- Component Forgings with Mandatory Toughness Requirements Specification Specif ication for Vacuum-Treated Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts Specification Specif ication for Steel Forgings, General Requirements Requirement s
A831
A831/A831M-95 A831/A831M-95
A836 Service
A836/A836M-95b
Specification for Titanium-Stabilized Carbon Steel Forgings Forgings for Glass-Lined Piping and Pressure Vessel
A837
A837-91 (1996) e1
Specification Specif ication for Steel Forgings, Alloy, for Carburizing Carburiz ing Applications
A859
A859/A859M-95 (1999) (1999)
A891
A891-98 A891 -98
A909
A909-94 (1999) (1999)
A921
A921/A921M-93 A921/A921M-93 (1999) (1999)
A952
A952/A952M-98
Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings Forgings for Liquid Metal Cooled Reactor Core Components
Specification for Age-Hardening Age-Hardening Alloy Steel Forgings Forgings for Pressure Vessel Components Specification Specif ication for Precipitation Hardening Iron Base Superalloy Superall oy Forgings for Turbine Rotor Disks and Wheels Specification for Steel Forgings, Forgings, Microalloy, for General Industrial Use Specification for Steel Bars, Microalloy, Hot-Wrought, Hot-Wrought, Special Quality, for Subsequent Hot Forging Forging Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Attachment Links
A961
A961-99 A961 -99
Specification Specif ication for Common Requirements Requirement s for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A965
A965/A965M-99
Specification for Steel Forgings, Forgings, Austenitic, for Pressure and High Temperature emperature Parts
A966
A966/A966M-96 A966/A9 66M-96
Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
