A Detailed Lesson Plan Date: January 7, 2019 Subject: Computer System Servicing
Yr. & Section: Grade 10 Zebulon Time & Day: 3:00-4:00 pm M-F
I. Objectives At the end end of the lesson lesson the the student student should be able to: to:
Create Bootable USB USB drive for Windows 7 using Rufus application Demonstrate bios setup of the computer Perform the Installation of Windows 7
II. Subject Matter Topic: Installation preparation and OS installation procedure. References: Internet Materials: desktop, projector, PowerPoint Grade 10 Zebulon 3:00 to 4:00 pm III. Learning Activities or Procedure: A. Preliminaries
Teacher’s Activity “Good afternoon Class...”
Student’s Activity “Good afternoon Sir !” !”
“Let us pray first... Glory be to the Father, and to the Son, and to the Holy Spirit.
As it was in the beginning, beginning, is now, now, and ever ever shall be, world without end. Amen.
B. Motivation/Recall or Review Teacher Activity
Student’s Activity
So class before we start our next lesson, who can recall our topic yesterday?
Sir we discuss the system requirements for installation of windows 7 and Create Bootable USB drive for Windows 7/8/8.1/10 using Rufus
Very good class! But before that what are this pictures?
Sir different types of operating system.
Very Good.
That is correct. C. Presentation of the Lesson Teacher’s Activity 1. Create bootable USB drive for Windows 7 using Rufus Application.
1. Open rufus then locate the file.
Student’s Activity
2. Select the ISO image.
3. Then choose win7all then click open.
4. Now click on Start, then click ok
5. Wait until will finish the copying.
6. Now you are done.
2. Demonstrate the bios setup of the computer
1. Use ↓/↑key to select "1st Drive", hit "Enter" key.
2. Go on enter Boot Settings, then see the Boot Device Priority item.
3. Enter Hard Disk Drives.
4. Select "USB: Kingston DTG(2G)" and press "Enter" to set the USB Flash drive as the first bootable option.
5. Now the USB Flash Drive is the first boot device.
6. Press "F10" to save and exit it, then select "OK" and press "Enter" key, the computer will reboot and boot from USB.
D. Generalization Teacher’s Activity Class what we discussed today?
Student’s Activity Sir about types of operating system and how to bios setup of a computer and windows 7 installation.
The most important task of BIOS is to provide the secured, initialized and fully functional platform to boot loader, so it can load the OS. So class do you understand? E. Application Criteria
Yes Sir. We Understand.
Percentage
Score
1. Operating System is installed with no errors.
40%
(Boot USB, BIOS Configuration, Username, Time Zone & Date
2. Proper disk partitioning and partition is performed . (with
40%
Partition)
3. Proper use of equipment and materials is observed. 4. Observance of Safety Precautions.
10% 10%
PERFORMANCE RATING
Teacher’s Activity
100%
Student’s Activity
Perform the Installation of the Windows 7 IV. Evaluation: V. Assignment: Teacher Activity Now bring out your note book and copy the Assignment for tomorrow.
Student’s Activity
1. What are the important application to install your new operating system? Ok Let us pray before we leave.
Glory be to the Father, and to the Son, and to the Holy Spirit.
Remarks: Date
Prepared by: Dexter N. Subiaga
As it was in the beginning, is now, and ever shall be, world without end. Amen.
