PROJECT - MAYTAS INCUBATION CENTRE PROJECT LOCATION - HILL COUNTY, HYDERABAD TITLE -ABSTRACT ESTIMATE FOR INTERNAL & EXTERNAL PLUMBING WORKS
SUMMARY AMOUNT RUPEES
IN
PLUMBING WORKS SUB HEAD -I
INTERNAL WORKS WATER SUPPLY & SANITARY
SUB HEAD II
1892616
EXTERNAL WORKS A WATER SUPPLY
412058
B SEWAGE
347503
C RECYCLED WATER SUPPLY WORK
256250
D STORM WATER DRAINS & RECHARGE PITS E PACKAGE TYPE SEWAGE TREATMENT PLANT 50 KLD CAP OF HICLEAR OF POORVI FARMTECH OR NGPSTP OF IONEXCHANGE OR CHEMPAC FBBR SYSTEM INCLUDING COST OF CIVIL WORKS
1003643
SUPPLYING
AND
ERECTING
DEPLOYABLE
SMC
1400000
PANAL
STORAGE WATER TANK OF 75KLD CAP(6.0MX5.0MX2.5M SIZE)
700000
SUPPLYING AND ERECTING WATER SOFTENER SUITABLE FOR A FLOW RATE OF 10CUM/HRS AND 500PPM HARDNESS F PUMPS- GRUNDFOS MAKE
120000
I WATER SUPPLY PUMP-MODEL H2K 2XCR 10-4 ( THREE PHASE) WITH 170 LTS CAP PRESSURE TANK -1SYSTEM
400000
II RECYCLED WATER SUPPLY PUMP FOR LAWN -MODEL CHV260HYDERO DOME SINGLE PHASE WITH 60 LTS CAP PRESSURE TANK-1NOS
135512
TOTAL
6667582
RUPEES SIXTYSIX LAKHS SIXTY SEVEN THOUSAND FIVE HUNDERED AND EIGHTY TWO ONLY
v raju chartered engineer for v raju & associates
INDIAN
PROJECT - MAYTAS INCUBATION CENTRE PROJECT LOCATION - HILL COUNTY, HYDERABAD ESTIMATE FOR WATER SUPPLY, SEWAGE DISPOSAL & STORM WATER DRAINAGE WORKS S.No.
DESCRIPTION
QTY
UNIT
RATE
42
Nos.
5548.45
RO
Nos.
7255.00
AMOUNT
SUB HEAD - I WATER SUPPLY & SANITARY WORKS (INTERNAL )
IWS 1 Providing and fixing European water closet suit Comprising of: a) Glazed vitreous chinaware European water closet of PARRYWARE CASCADE DUEL FLUSH 3 Ltr / 6 Ltr make or any other approved make with trap as mentioned above, conforming to IS 2556-Part II fixed to floor with necessary teak wood plugs. C.P. Brass screws No.8x37 etc.
b) Glazed vitreous Chinaware matching Low Level flushing cistern suitable for water closet bearing ISI mark with all internal fittings,mounted suitably over closet with necessary fixtures. c) 15mmheavy quality flexible PVC inlet connection with C.P.brass hexagonal check nuts with washers at both ends.
d) Matching poly propelene seat and cover of approved PARRY WARE product code: 8012 or equilent make and colour with Unbreakable Plastic Hinges conforming to suitable for water closet. e) 15MM brass Angle stop cock (JAQUAR, Code No. 21053) or equivalent conforming to IS 781 of approved make with a minimum weight of 400 grms. on the inlet to the cistern complete all as specified above with approved fittings. A
SUPPLY i) WHITE COLOUR
ii) SPECIAL COLOUR
233034.90
B
Charges for installation
42
Nos.
500.00
21000.00
C
Providing and fixing CP metro pole flush wall concealed type with cover plate 40mm size (Jaquare code - 1091)
42
Nos.
2100.00
88200.00
IWS 2 Providing and fixing Indian style water closet suite (Orissapan with CP bend) comprising of : a) Indian water closet glazed vitreous chinaware Orissapan 630mm of PARRYWARE or equivalent approved make of size 510 x 400mm with trap
Page 2 of 12
S.No.
DESCRIPTION
QTY
UNIT
RATE
1
Nos.
2526.45
RO
Nos.
3400.00
1
Nos.
500.00
AMOUNT
b) 10 Litres capacity low level cistern of vacuum operated siphon made out of ceramic of PARRYWARE or equivalent make made of corrosive resistant materials fixed to wall with necessary brackets, and screw and plugs.
c) 32mm CP Flush pipe of heavy quality with brass union nut of required length to suit the cistern to the W.C. inlet and making necessary connections, concealed in the wall etc.
d) 15mm size heavy quality flexible P.V.C. Inlet pipe connection with C.P. brass check nuts with washers at both ends. e) 15mm C.P. ANGLE STOP COCK (JAQUAR Code No. 053 ) or equivalent conforming to IS 781 of approved make with a minimum weight of 400 grms on the inlet to the cistern complete all specified and directed with approved fittings. A SUPPLY i) WHITE
ii) SPECIAL COLOUR
B
Charges for installation
IWS 3 Providing and fixing Wash Hand Basin comprising of;
Oval type
a) Glazed vitreous china above counter oval shaped wash basin of PARRYWARE CASCADE Code: 0426 or equivalent conforming to IS : 2556 part - IV with single tap hole and bearing supported on a pair of painted C.I. Brackets conforming to IS 775. b) One 15 mm brasssingle lever basin mixture (JAQUAR, Code No. 21011) or equivalent approved make with minimmum weight 577 grms conforming to IS 1795 c) One 15mm heavy quality flexible PVC inlet pipe connection with C.P.brass hexagonal check nuts with washers at both ends. d) One 15mm Brass Angle Stop Cock (JAQUAR, Code No. 21053) or equivalent of approved make conforming to IS781 with a minimum weight of 400 grms on the inlet to the basin . e) One 32mm heavy quality CP brass waste Coupling (JAQUAR Code No. 705) or equivalent with rubber plug and C.P.Chain. f) One 32mm C.P.Brass Bottle Trap with extension piece and wall flanges etc.
Page 3 of 12
2526.45
500.00
S.No.
DESCRIPTION
QTY
UNIT
RATE
AMOUNT
40
Nos.
6260.00
RO
Nos.
7600.00
40
Nos.
500.00
20000.00
40
Nos.
12650.00
506000.00
RO
Nos.
3985.00
30
Nos.
12250.00
RO
Nos.
750.00
g) One 32mm medium quality G.I.waste pipe with specials from extension piece of the bottle trap to the floor trap, length not exceeding 1mtr.concealed in the wall. h) One no.40mm GI bend of 40mm dia 250mm long GI pipe connecting waste pipe to floor trap. A SUPPLY i) WHITE
ii) SPECIAL COLOUR
B
Charges for installation
C
Providing CP wash basin sensor tap (Jaquar Code - 51011)
IWS 4a) Providing and fixing approved make glazed large flat back Urinal of PARRYWARE MAGNUM (Special Colour) or equivalent of size 635 x 395 x 420mm with 40mm dia C.P. waste coupling with dome type grating,40mm C.P.bottle trap with extension pipe, C.P.concealed stop cock, C.P.wall flanges C.P.Spreader etc.complete as directed.
b) Providing and fixing glazed large flat back Urinal of PARRYWARE INTEGRATED EFS Code No. 8097 (Special Colour) or equivalent with matching urinal in one sleek compact unit with 40mm dia C.P. waste coupling with dome type grating,40mm C.P.bottle trap with extension pipe, C.P.wall flanges C.P.Spreader etc.complete as directed.(Runs on 230V AC and shall be provided with battery back up as per manufacture specifications)
c) Providing and fixing of auto 5ltrs cistern for flat back Urinal of PARRYWARE (Special Colour) or equivalent with necessary fixtures, piping with special connect to the urinals etc., complete. IWS 5 A Providing and fixing Kitchen sink with drain board comprising of; a) Best quality stainless steel Kitchen Sink of approved make of size 600X450x250mm and drain board of size 550X450 mm conforming to IS: 771 supported on painted CI brackets conforming to IS: 779. b) One 40 mm heavy quality brass waste coupling c) One 32 mm PVC waste pipe bent to shape length not exceeding 1m. To discharge into the floor trap through GI elbow.
Page 4 of 12
250400.00
367500.00
QTY
UNIT
1
Nos.
6081.00
6081.00
1
Nos.
1825.00
1825.00
42
Nos.
700.00
29400.00
RO
Nos.
1100.00
42
Nos.
125.00
5250.00
30
Nos.
675.00
20250.00
40
R.M
2195.00
87800.00
b) 1mt to 2mts in length
1
R.M
2320.00
2320.00
c) Above 2mts in length
R.O
R.M
2440.00
IWS 9 . Providing and fixing in position approved make 15mm n.b. CP brass Short Body bib tap (JAQUAR, Code No. 037) or equivalent conforming to IS: 781 with a minimum weight of 400 gms.
42
Nos.
465.00
19530.00
IWS 10 Providing and fixing in position approved make of 15mm n.b. CP brass sink cock (JAQUAR, Code No. 359) or equivalent conforming to IS Standard.
1
Nos.
975.00
975.00
S.No. DESCRIPTION d) One 40 mm GI medium class pipe 250mm long connecting elbow to floor trap. Complete all as specified with approved fittings. IWS 5 B Providing and fixing Kitchen sink mixture Swinging Casted Spout ( table mounted model) with 450 mmcopper pipes and brass nuts( JAQUAR, Code No. 309A
RATE
AMOUNT
IWS 6 Providing and fixing in position 150mm x150mm recessed type toilet paper roll holder (JAQUAR, Code No. 21751) or equivalent of approved make with necessary CP screws and washers fixed to wall, fixing and making good the surface etc; complete all as specified and directed. A
SUPPLY i) WHITE
ii) SPECIAL COLOUR
B
Charges for installation
IWS 7 Providing and fixing in position 150mmx150mm recess type CP soap dish (JAQUAR, Code No. 1131) or equivalent of approved make with necessary CP screws and washers fixed into the wall including cutting the wall, fixing and making good the surface etc. Complete all as specified.
IWS 8 Providing and fixing in position best quality approved make mirror (Belgium glass ) of ht 550mm mounted on 6 mm thick plain asbestos sheet backing with required No. of CP brass cap screws and washers fixed to wall with necessary plugs and with 50mm x 25mm T.W. beading with design alround etc., complete all as specified and directed.
a) Upto 1mt in length
Page 5 of 12
QTY
UNIT
30
Nos.
690.00
20700.00
a) 20mm n.b.
2
Nos.
432.05
864.10
b) 25mm n.b.
10
Nos.
532.50
5325.00
1
R.M
1520.15
1520.15
a) 15 mm n.b. ( 1.23 kg/mt)
30
R.M
97.85
2935.50
b) 20mm n.b. (1.59 kg/mt)
150
R.M
147.20
22080.00
c) 25mm n.b. (2.46 kg/mt)
70
R.M
200.45
14031.50
d) 32mm n.b. (3.17 kg/mt)
R.O.
R.M
254.60
e) 40mm n.b. (3.65 kg/mt)
10
R.M
284.05
S.No. DESCRIPTION IWS 11 Providing and fixing in position best approved quality and type towel ring ( JAQUAR, Code No. 21721) or equivalent with a pair of bracket or flanges fixed to wall and necessary screws, plugs, etc. all as specified and as directed .
RATE
AMOUNT
IWS 12 Providing and fixing in position approved best Indian make heavy quality screw down gun metal gate valves with hand wheel of following sizes conforming to IS:778 and bearing ISI mark including testing. Making good the leakages etc.complete
d) 40mm n.b. (3.65 kg/mt) IWS 13 Providing, laying, jointing, fixing, testing painting, commissioning GI pipe medium grade conforming to IS:1239 including cost of GI special cutting the pipe to the required lengths, threading, jointing the pipes, chasing the walls and floors, making the holes, clamping to walls using wooden spacers or clamps and restoring the same to the original conditions, necessary excavation, testing, refilling etc. complete all as specified and directed.
IWS 18 B PE-AL-PE Composite Pressure Pipes & Fittings
(OPTIONAL ITEM)
Page 6 of 12
2840.50
S.No.
DESCRIPTION I) Providing & fixing Polyethelene-Aluminum-
QTY
UNIT
RATE
AMOUNT
Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS 15450 duly ' ISI ' marked, U.V. stabilised with carbon black for hot & cold water supply, capable to withstand temperature upto 80º C including all special composite fittings (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1 metre spacing, cutting & making good the walls etc. including testing complete as required. (Internal Work) Pipes exposed on wall 1.1
1216 (16 mm OD) pipe
R.O
R.M
134.00
1.2
1620 (20 mm OD) pipe
R.O
R.M
165.00
1.3
2025 (25 mm OD) pipe
R.O
R.M
207.00
1.4
2532 (32 mm OD) pipe
R.O
R.M
278.00
1.5
3240 (40 mm OD) pipe
R.O
R.M
365.00
1.6
4050 (50 mm OD) pipe
R.O
R.M
465.00
115
R.M
465.75
53561.25
100
R.M
560.70
56070.00
R.O.
RM
365.95
66
Nos.
456.00
30096.00
2
Nos.
10000.00
20000.00
IWS 17 Providing laying and fixing in position under floor, against wall in chases sand cast iron soil pipes and specials conforming to IS:1729 including cutting the pipes to the required lengths, making joint to CI soil pipe and specials with Lead Joints labour for packing curing ,painting &testing the joint to the required pressure and rectifying the leakages if any etc. complete as per specifications (specials at junctions of lateral pipe and vertical stack must have access door for inspection ). a) 75mm dia b) 100mm dia c) 50 mm dia C.I.antisyphonage IWS 19 Providing and fixing C.I.Floor trap of size 75x110 mm, heavy duty with C.P.gratting.conforming to I.S.standards. Supplying and fixing heavy duty electrically operated geysors suitable for hydero pnuematic pressure boosting pumping system including providing two nos CP angle valves, heavy duty flexible PVC and vent pipe of RECOLD brand or equivlent for 25 ltrs cap TOTAL
Page 7 of 12
1892616.35
S.No.
DESCRIPTION
SUB HEAD II
QTY
UNIT
RATE
AMOUNT
EXTERNAL WORKS
A WATER SUPPLY EWS1 Providing, laying, jointing, fixing, testing, painting, commissioning GI pipe medium grade conforming to IS 1239 including cost of GI specials cutting the pipes to the required lengths, threading, jointing the pipes, chasing the walls and floors, making the holes, clamping to walls using wooden spacers or clamps and restoring the same to the original conditions, necessary excavation, testing, refilling etc., complete all as specified and directed. a) 25mm n.b.
50
R.M
200.45
10022.5
b) 40mm n.b.
40
R.M
250
10000
c) 50mm n.b.
75
R.M
310
23250
d) 65mm n.b.
100
R.M
470
47000
e) 80mm n.b.
72
R.M
650
46800
a) 25mm n.b.
4
Nos.
532.5
2130
b) 40mm n.b.
4
Nos.
983
3932
c) 50mm n.b.
2
Nos.
1575
3150
d) 65mm n.b.
4
Nos.
2706
10824
e) 80mm n.b.
4
Nos.
3830
15320
1
Nos.
6500
6500
i) 40 mm n b
2
Nos.
5000
10000
ii)25mm n b
4
Nos.
3500
14000
EWS 2 Providing and fixing in position approved best Indian make heavy quality screw down gun metal gate valves with hand wheel of following sizes conforming to IS 778 and bearing ISI mark including testing, making good the leakages etc., complete
EWS 3 supply and fixing of water meter of approved brand of manufacture having stainless steel gears and fixed inside a masonry valve chamber ,providing and fixing of lockable type CI frame and cover.the rate includes the cost of masonary chamber of minimum size 900mmx600mm with internal and external plastering etc . to accomodate 1no 50mm dia ball valve and water meter complete as per specification ( weight of CI cover shall not be less than 110kgs EWS 4 supplying ,installation testing and commissioning of approved make pressure reducing station on water lines with by pass arrangement. The system shall include pressure reducing valves, bronze isolation valves, up stream and down stream pressure guages Y strainers by pass ball valves unions & piping arrangement
Page 8 of 12
S.No. DESCRIPTION EWS 5 supplying ,installation testing and commissioning of approved make CI non return valves conforming to IS: 778 with necessary companion flanges neoprene gaskets (10kg/sqcm rating) nuts and bolts including all the accessaries to complete the work . The system shall include pressure reducing valves, bronze isolation valves, up stream and down stream pressure guages Y strainers by pass ball valves unions & piping arrangement
QTY
UNIT
RATE
AMOUNT
i) 80mm n b
1
Nos.
3307.50
3307.5
ii)65mm n b
1
Nos.
2756.00
2756
38
Nos.
3950
150100
i) 40 mm nb
2
Nos.
1083.00
2166
ii) 25 mm nb
4
Nos.
600.00
2400
ii) 20 mm nb
14
Nos.
600.00
8400
1
job
40000
40000
EWS6 Construction of valve chamber of size 600x600mm, 750mm deep comprising of 230mm thick brick walls using locally available best quality table moulded bricks with min. compresive strength of 35Kg per Sqcm in C.M. 1:5 over a bed of 150mm thick PCC 1:4:8 using 40mm metal with 75mm projections alround beyond the masonry faces, plastered with CM 1:3 mixed with approved water proofing compound as per manufacturer's specification, 12mm thick on internal, external top surfaces and internal and top exposed surfaces finished smooth with a floating coat of neat cement providing and fixing painted light duty double seal CI frame and cover of size 600 x 450mm weighing not less than 52 kgs conforming to IS: 1726 with locking arrangements, fixing the frame in RCC 1:2:4 including cost of necessary steel reinforcement, fabricating, formwork, curing etc., complete all as specified and directed. NOTE: CC 1:2:4 in the above item is by using 20mm graded granite aggregate obtained from approved quarry. EWS7 supplying and fixing of Bronze ball valves as per IS :1703-1977,with necessary nuts and bolts including all the accessessories to complete the work
EWS8 Making necessary connection from the existing corporation water supply which is available outside the campus with necessary works and required specials etc complete
412058.00
TOTAL - A
B SEWAGE ESW 1 Providing and laying best quality salt glazed stoneware pipe of grade 'A' and specials conforming to IS : 651 in trenches for all depths to correct grade, level and alignment including jointing with hemp yarn and CM 1:1 including testing, making good the leakages all as specified and directed
a) 100mm dia
24
R.M
183
4392
b) 150mm dia
275
R.M
254
69850
c) 200mm dia
70
R.M
350
24500
Page 9 of 12
S.No. DESCRIPTION ESW 2 Construction of inspection chamber of internal clear dimension as mentioned below in 230mm thick brick masonry using locally available best quality table moulded brick with minimum compressive strength of 35kgs Sqcm. in CM 1:3 over a bed of 150mm thick 1:2:4 (20mm metal) cement concrete, plastering with CM 1:2, 12mm thick on internal, external, exposed top surfaces and internal finished smooth with a floating coat of neat cement 1:2:4 plain cement concrete for benching, channeling, providing and fixing precast RCC M15 frame and cover as mentioned below including cost of necessary steel reinforcement as per drg encasing sewer connections to chamber in PCC 1:2:4 etc., complete all as specified and directed
QTY
UNIT
RATE
AMOUNT
NOTE: CC 1:2:4 item in the above item is by using 20mm size graded granite aggregate obtained from approved quarry. a) 600 x 600 x 600mm (with 600 x 600mm RCC frame & Cover)
8
Nos.
2345
18760
b) 600 x 600 x 750mm (with 600 x 600mm RCC frame & Cover)
1
Nos.
2710
2710
18
Nos.
895.00
1087.40
2
Nos.
3014.60
6029.20
19
Nos.
6325
120175
10
Nos.
2000
20000
EWS 3 Providing and fixing in position best quality salt glazed stoneware gully trap of size 100mm square with 100mm outlet conforming to IS 651 embedded in plain cement concrete 1;4:8 (20mm metal), providing& fixing 100mm square CI grating on top of the trap all the above encased in a chamber of 300 x 300mm built with 115mmthick brick masonry using first class country bricks in CM 1:3 Over bed of CC 1;4:8 using 40mm size metal 100mm thick, plastering with CM 1:3 , 13mm thick inside, outside, exposed top surface and internal and top exposed surfaces finished smooth with a floating coat of neat cement ,providing and fixing CI frame and cover of size 300x300mm weighing not less than 7kgs fixing the frame and in PCC 1:2:4 using 20mm stone metal including painting the frame and cover with 3 coat of anticorrosive black bitumastic painting etc; complete all as specified and directed EWS 4 Construction of grease trap chamber of internal clear dimension 450x450x760 in 230mm thick brick masonry using first class country brick in CM 1:3 over a bed of 150 mm thick 1;2:4 cement concrete, plastering with cm 1:2, 12mm thick on internal, external ,top surface and inside and exposed top surfaces finished smooth with a floating coat of neat cement, providing and fixing light single seal CI frame and cover of size 450x450mm weighing not less than 25kgs conforming to IS :1726 cc 1:2 :4 for fixing the CI frame and cover, painting with 3 coats of anticorrosive black bitumastic paint providing one SW TEE of 100mm ,on the outlet, encasing sewer connections to chamber 1:2:4 etc; complete all as specified and directed
ESW 5a) Construction of manhole of internal clear dimension 800 x 800mm in 230mm thick brick masonry using 1st class country brick in CM 1:3 over a bed of 150mm thick CC 1:2:4 plastering with C.M. 1:2 12mm thick on internal, external surfaces and internal top exposed surfaces finished smooth with floating coat of neat cement 1:2:4 plain cement concrete for benching channeling, providing and fixing C.I frame and cover of size 600mm dia. including cost of necessary steel reinforcement as per drawing, CI steps with 3 coats of anticorrosive black bitumastic painting encasing of sewer connections to manhole with PCC 1:2:4 etc., complete all as specified and directed for depth not exceeding 0.75m
b) Extra for construction of additional depth of manhole of size 800 x 800mm beyond the initial depth of 0.75m for brick work plastering, providing CI steps, dewatering etc., complete (rate for Upto a max. additional depth of 1m.)
Page 10 of 12
S.No. DESCRIPTION ESW6 Construction of sewage collection well of 3.0m internal diameter and 2.50m depth in rcc including 6mmthick plastering rendering leak proof andwith necessary earth work excavation completed work
QTY
UNIT 1
job
RATE 80000
AMOUNT 80000
347503.60
TOTAL -B
C RECYCLED WATER SUPPLY RCWS 1 PE-AL-PE Composite Pressure Pipes & Fittings RECYCLED
1.1 1.2 1.3 1.4 1.5 1.6
WATER SUPPLY LINES FOR LAWN WATERING Providing & fixing Polyethelene-Aluminum-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS 15450 duly ' ISI ' marked, U.V. stabilised with carbon black for hot & cold water supply, capable to withstand temperature upto 80º C including all special composite fittings (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc. with tranching & refilling upto 1 metre depth including testing complete as required. (External Work) Pipe in trenches including excavation & refilling etc. 1216 (16 mm OD) pipe 1620 (20 mm OD) pipe 2025 (25 mm OD) pipe 2532 (32 mm OD) pipe 3240 (40 mm OD) pipe 4050 (50 mm OD) pipe
R.O. 20 60 R.O. R.O. 500
R.M R.M R.M R.M R.M R.M
157.00 186.00 226.00 293.00 375.00 478.00
3720 13560
239000
256280.00
TOTAL -C
D STORM WATER DRAINS & RECHARGE PITS ST 1 Earth work excavation for foundations of buildings and depositing at site with an initial lead of 50 Mts including all operational, incidental, labour charges such as shoring sheeting, planking, strutting etc., complete for finished item of work including dewatering, in mixture of gravel and soft disintegrated rock like shales ordinary gravel stoney earth and earth mixed with fair sized boulders a) upto 1.5m depth below G.L
ST 2 Refilling with useful available excavated earth (Excluding rock) in trenches sides of foundations basement etc., with an initial lead, in layers not exceeding 15 cm, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental labour charges etc., complete for finished item of work PLAIN CEMENT CONCRETE ST 3 Providing and laying cement concrete 1:4:8 using 40mm size nominal/graded hard granite stone aggregate obtained from approved quarry including compaction, finishing top surface to level, curing but excluding cost of formwork etc., complete as per specifications. Mix ratio specified is for (Cement: coarse sand: graded stone aggregate by volume). ST 4 P.C.C (1:3:6) 50mm thick wearing coat on drain bed with neat cement finishing.
Page 11 of 12
270.00
Cu.M
113.00
30510
90.00
Cu.M
40
3600
67.50
Cu.M
2140.00
144450
360.00
Sq.M
150
54000
S.No.
DESCRIPTION STONE MASONRY ST 5 Providing and constructing Stone masonry work using hard granite stones with bond stones at every 0.50 Sqm of wall surface, in C.M.(1:6) (Mix ratio specified is for cement: coarse sand) without pinning on face, but including raking out joints, curing etc.,complete as per specifications, drawings and as directed . (Rate to include cost of bond stones wherever provided) in foundations plinth and wherever required. a) R.R.masonry in C.M (1:6) above plinth level.
ST 6 Precast slabs with or without perforations. PLASTERING & FINISHES ST 7 Providing cement Plastering 20mm thick in 2 coats with a base coat of 16mm thick in CM 1:5 prop and top coat of 4mm thick in CM 1:3 prop. with smooth/sponge finish including cost and conveyance of all materials, labour charges, scaffolding charges lift charges, curing etc., complete for finished item of work as directed at all heights. ST 8 Strom water colloction chambers of min size 900mmx600mm in stone masonry work with necessary plastering and covers( cost of cover shall be paid separatly)
ST9 Supplying and providing cast iron grating with panel of size 900 x 600mm weighing about 118 Kgs conforming to IS standards and entry of ramps in basement floor to allow the rain water to flow in to the drain.
ST10 RAIN WATER RECHARGE PITS WORK constructing rain water recharge pits of size 1.20mx1.20m x2.00mdeep by excavation of Pit and refilling of 40mmmetal ,20mmmetal and sand as per drawing
ST11
providing R.C.C NP2 class pipe drain from court yards to storm drain under floors including necessary excavation refilling including consolidation jointing in cement mortor etc- using 300 mm dia NP2 CLASS PIPE
AMOUNT
QTY
UNIT
RATE
102.60
Cu.M
2008.00
206020.8
33.75
Cu.M
4550
153562.5
450.00
Sq.M
115.00
51750
16.00
Nos.
3500
56000
50.00
R.M
4535
226750
16.00
Nos.
3500
56000
60.00
Nos.
350
21000
1003643.3
TOTAL -D
TOTAL A+B+C+D
2019484.90
Page 12 of 12